Wed Jul 21 11:55:31 1993 Jim Kingdon (kingdon@deneb.cygnus.com) * hppa.h: New argument type 'y'. Use in various float instructions. Mon Jul 19 17:17:03 1993 Jim Kingdon (kingdon@deneb.cygnus.com) * hppa.h (break): First immediate field is unsigned. * hppa.h: Add rfir instruction. Sun Jul 18 16:28:08 1993 Jim Kingdon (kingdon@rtl.cygnus.com) * mips.h: Split the actual table out into ../../opcodes/mips-opc.c. Fri Jul 16 09:59:29 1993 Ian Lance Taylor (ian@cygnus.com) * mips.h: Reworked the hazard information somewhat, and fixed some bugs in the instruction hazard descriptions. Thu Jul 15 12:42:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * m88k.h: Corrected a couple of opcodes. Tue Jul 6 15:17:35 1993 Ian Lance Taylor (ian@cygnus.com) * mips.h: Replaced with version from Ralph Campbell and OSF. The new version includes instruction hazard information, but is otherwise reasonably similar. Thu Jul 1 20:36:17 1993 Doug Evans (dje@canuck.cygnus.com) * h8300.h: Fix typo in UNOP3 (affected sh[al][lr].l). Fri Jun 11 18:38:44 1993 Ken Raeburn (raeburn@cygnus.com) Patches from Jeff Law, law@cs.utah.edu: * hppa.h: Clean up some of the OLD_TABLE, non-OLD_TABLE braindamage. Make the tables be the same for the following instructions: "bb", "addb[tf]", "addib[tf]", "add", "add[loc]", "addco", "sh[123]add", "sh[123]add[lo]", "sub", "sub[obt]", "sub[bt]o", "ds", "comclr", "addi", "addi[ot]", "addito", "subi", "subio", "comiclr", "fadd", "fsub", "fmpy", "fdiv", "fsqrt", "fabs", "frnd", "fcpy", "fcnvff", "fcnvxf", "fcnvfx", "fcnvfxt", "fcmp", and "ftest". * hppa.h: Make new and old tables the same for "break", "mtctl", "mfctl", "bb", "ssm", "rsm", "xmpyu", "fmpyadd", "fmpysub". Fix typo in last patch. Collapse several #ifdefs into a single #ifdef. * hppa.h: Delete remaining OLD_TABLE code. Bring some of the comments up-to-date. * hppa.h: Update "free list" of letters and update comments describing each letter's function. Fri Jun 4 15:41:37 1993 Steve Chamberlain (sac@phydeaux.cygnus.com) * h8300.h: checkpoint, includes H8/300-H opcodes. Thu Jun 3 15:42:59 1993 Stu Grossman (grossman@cygnus.com) * Patches from Jeffrey Law . * hppa.h: Rework single precision FP instructions so that they correctly disassemble code PA1.1 code. Thu May 27 19:21:22 1993 Bruce Bauman (boot@osf.org) * i386.h (i386_optab, mov pattern): Remove Mem16 restriction from mov to allow instructions like mov ss,xyz(ecx) to assemble. Tue May 25 00:39:40 1993 Ken Raeburn (raeburn@cygnus.com) * hppa.h: Use new version from Utah if OLD_TABLE isn't defined; gdb will define it for now. Mon May 24 15:20:06 1993 Ken Raeburn (raeburn@cambridge.cygnus.com) * sparc.h: Don't end enumerator list with comma. Fri May 14 15:15:50 1993 Ian Lance Taylor (ian@cygnus.com) * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson): * mips.h (OP_MASK_COPZ, OP_SH_COPZ): Define. ("bc2t"): Correct typo. ("[ls]wc[023]"): Use T rather than t. ("c[0123]"): Define general coprocessor instructions. Mon May 10 06:02:25 1993 Ken Raeburn (raeburn@kr-pc.cygnus.com) * m68k.h: Move split point for gcc compilation more towards middle. Fri Apr 9 13:26:16 1993 Jim Kingdon (kingdon@cygnus.com) * rs6k.h: Clean up instructions for primary opcode 19 (many were simply wrong, ics, rfi, & rfsvc were missing). Add "a" to opr_ext for "bb". Doc fix. Thu Mar 18 13:45:31 1993 Per Bothner (bothner@rtl.cygnus.com) * i386.h: 486 extensions from John Hassey (hassey@dg-rtp.dg.com). * mips.h: Add casts, to suppress warnings about shifting too much. * m68k.h: Document the placement code '9'. Thu Feb 18 02:03:14 1993 John Gilmore (gnu@cygnus.com) * m68k.h (BREAK_UP_BIG_DECL, AND_OTHER_PART): Add kludge which allows callers to break up the large initialized struct full of opcodes into two half-sized ones. This permits GCC to compile this module, since it takes exponential space for initializers. (numopcodes, endop): Revise to use AND_OTHER_PART in size calcs. Thu Feb 4 02:06:56 1993 John Gilmore (gnu@cygnus.com) * a29k.h: Remove RCS crud, update GPL to v2, update copyrights. * convex.h: Added, from GDB's convx-opcode.h. Added CONST to all initialized structs in it. Thu Jan 28 21:32:22 1993 John Gilmore (gnu@cygnus.com) Delta 88 changes inspired by Carl Greco, : * m88k.h (PMEM): Avoid previous definition from . (AND): Change to AND_ to avoid ansidecl.h `AND' conflict. Sat Jan 23 18:10:49 PST 1993 Ralph Campbell (ralphc@pyramid.com) * mips.h: document "i" and "j" operands correctly. Thu Jan 7 15:58:13 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * mips.h: Removed endianness dependency. Sun Jan 3 14:13:35 1993 Steve Chamberlain (sac@thepub.cygnus.com) * h8300.h: include info on number of cycles per instruction. Mon Dec 21 21:29:08 1992 Stu Grossman (grossman at cygnus.com) * hppa.h: Move handy aliases to the front. Fix masks for extract and deposit instructions. Sat Dec 12 16:09:48 1992 Ian Lance Taylor (ian@cygnus.com) * i386.h: accept shld and shrd both with and without the shift count argument, which is always %cl. Fri Nov 27 17:13:18 1992 Ken Raeburn (raeburn at cygnus.com) * i386.h (i386_optab_end, i386_regtab_end): Now const. (one_byte_segment_defaults, two_byte_segment_defaults, i386_prefixtab_end): Ditto. Mon Nov 23 10:47:25 1992 Ken Raeburn (raeburn@cygnus.com) * vax.h (bb*): Use "v" (bitfield type), not "a" (address operand) for operand 2; from John Carr, jfc@dsg.dec.com. Wed Nov 4 07:36:49 1992 Ken Raeburn (raeburn@cygnus.com) * m68k.h: Define FIXED_SIZE_BRANCH, so bsr and bra instructions always use 16-bit offsets. Makes calculated-size jump tables feasible. Fri Oct 16 22:52:43 1992 Ken Raeburn (raeburn@cygnus.com) * i386.h: Fix one-operand forms of in* and out* patterns. Tue Sep 22 14:08:14 1992 Ken Raeburn (raeburn@cambridge.cygnus.com) * m68k.h: Added CPU32 support. Tue Sep 22 00:38:41 1992 John Gilmore (gnu@cygnus.com) * mips.h (break): Disassemble the argument. Patch from jonathan@cs.stanford.edu (Jonathan Stone). Wed Sep 9 11:25:28 1992 Ian Lance Taylor (ian@cygnus.com) * m68k.h: merged Motorola and MIT syntax. Thu Sep 3 09:33:22 1992 Steve Chamberlain (sac@thepub.cygnus.com) * m68k.h (pmove): make the tests less strict, the 68k book is wrong. Tue Aug 25 23:25:19 1992 Ken Raeburn (raeburn@cambridge.cygnus.com) * m68k.h (m68ec030): Defined as alias for 68030. (m68k_opcodes): New type characters "3" for 68030 MMU regs and "t" for immediate 0-7 added. Set up some opcodes (ptest, bkpt) to use them. Tightened description of "fmovex" to distinguish it from some "pmove" encodings. Added "pmove" for 68030 MMU regs, cleaned up descriptions that claimed versions were available for chips not supporting them. Added "pmovefd". Mon Aug 24 12:04:51 1992 Steve Chamberlain (sac@thepub.cygnus.com) * m68k.h: fix where the . goes in divull Wed Aug 19 11:22:24 1992 Ian Lance Taylor (ian@cygnus.com) * m68k.h: the cas2 instruction is supposed to be written with indirection on the last two operands, which can be either data or address registers. Added a new operand type 'r' which accepts either register type. Added new cases for cas2l and cas2w which use them. Corrected masks for cas2 which failed to recognize use of address register. Fri Aug 14 14:20:38 1992 Per Bothner (bothner@cygnus.com) * m68k.h: Merged in patches (mostly m68040-specific) from Colin Smith . * m68k.h: Merged m68kmri.h and m68k.h (using the former as a base). Also cleaned up duplicates, re-ordered instructions for the sake of dis-assembling (so aliases come after standard names). * m68kmri.h: Now just defines some macros, and #includes m68k.h. Wed Aug 12 16:38:15 1992 Steve Chamberlain (sac@thepub.cygnus.com) * m68kmri.h: added various opcodes. Moved jbxx to bxxes. Filled in all missing .s Mon Aug 10 23:22:33 1992 Ken Raeburn (raeburn@cygnus.com) * sparc.h: Moved tables to BFD library. * i386.h (i386_optab): Add fildq, fistpq aliases used by gcc. Sun Jun 28 13:29:03 1992 Fred Fish (fnf@cygnus.com) * h8300.h: Finish filling in all the holes in the opcode table, so that the Lucid C compiler can digest this as well... Fri Jun 26 21:27:17 1992 John Gilmore (gnu at cygnus.com) * i386.h: Add setc, setnc, addr16, data16, repz, repnz aliases. Fix opcodes on various sizes of fild/fist instructions (16bit=no suffix, 32bit="l" suffix, 64bit="ll" suffix). Use tabs to indent for comments. Fixes suggested by Minh Tran-Le. Thu Jun 25 16:13:26 1992 Stu Grossman (grossman at cygnus.com) * h8300.h: Fill in all the holes in the opcode table so that the losing HPUX C compiler can digest this... Thu Jun 11 12:15:25 1992 John Gilmore (gnu at cygnus.com) * mips.h: Fix decoding of coprocessor instructions, somewhat. (Fix by Eric Anderson, 3jean@maas-neotek.arc.nasa.gov.) Thu May 28 11:17:44 1992 Jim Wilson (wilson@sphagnum.cygnus.com) * sparc.h: Add new architecture variant sparclite; add its scan and divscc opcodes. Define ARCHITECTURES_CONFLICT_P macro. Tue May 5 14:23:27 1992 Per Bothner (bothner@rtl.cygnus.com) * mips.h: Add some more opcode synonyms (from Frank Yellin, fy@lucid.com). Thu Apr 16 18:25:26 1992 Per Bothner (bothner@cygnus.com) * rs6k.h: New version from IBM (Metin). Thu Apr 9 00:31:19 1992 Per Bothner (bothner@rtl.cygnus.com) * rs6k.h: Fix incorrect extended opcode for instructions `fm' and `fd'. (From metin@ibmpa.awdpa.ibm.com (Metin G. Ozisik).) Tue Apr 7 13:38:47 1992 Stu Grossman (grossman at cygnus.com) * rs6k.h: Move from ../../gdb/rs6k-opcode.h. Fri Apr 3 11:30:20 1992 Fred Fish (fnf@cygnus.com) * m68k.h (one, two): Cast macro args to unsigned to suppress complaints from compiler and lint about integer overflow during shift. Sun Mar 29 12:22:08 1992 John Gilmore (gnu at cygnus.com) * sparc.h (OP): Avoid signed overflow when shifting to high order bit. Fri Mar 6 00:22:38 1992 John Gilmore (gnu at cygnus.com) * mips.h: Make bitfield layout depend on the HOST compiler, not on the TARGET system. Fri Feb 21 01:29:51 1992 K. Richard Pixley (rich@cygnus.com) * i386.h: added inb, inw, outb, outw opcodes, added att syntax for scmp, slod, smov, ssca, ssto. Curtesy Minh Tran-Le . Thu Jan 30 07:31:44 1992 Steve Chamberlain (sac at rtl.cygnus.com) * h8300.h: turned op_type enum into #define list Thu Jan 30 01:07:24 1992 John Gilmore (gnu at cygnus.com) * sparc.h: Remove "cypress" architecture. Remove "fitox" and similar instructions -- they've been renamed to "fitoq", etc. REALLY fix tsubcctv. Fix "fcmpeq" and "fcmpq" which had wrong number of arguments. * h8300.h: Remove extra ; which produces compiler warning. Tue Jan 28 22:59:22 1992 Stu Grossman (grossman at cygnus.com) * sparc.h: fix opcode for tsubcctv. Tue Jan 7 17:19:39 1992 K. Richard Pixley (rich at cygnus.com) * sparc.h: fba and cba are now aliases for fb and cb respectively. Fri Dec 27 10:55:50 1991 Per Bothner (bothner at cygnus.com) * sparc.h (nop): Made the 'lose' field be even tighter, so only a standard 'nop' is disassembled as a nop. Sun Dec 22 12:18:18 1991 Michael Tiemann (tiemann at cygnus.com) * sparc.h (nop): Add RD_GO to `lose' so that only %g0 in dest is disassembled as a nop. Tue Dec 10 00:22:20 1991 K. Richard Pixley (rich at rtl.cygnus.com) * sparc.h: fix a typo. Sat Nov 30 20:40:51 1991 Steve Chamberlain (sac at rtl.cygnus.com) * a29k.h, arm.h, h8300.h, i386.h, i860.h, i960.h , m68k.h, m88k.h, mips.h , np1.h, ns32k.h, pn.h, pyr.h, sparc.h, tahoe.h, vax.h, ChangeLog: renamed from ../-opcode.h