\input texinfo @c -*-texinfo-*- @setfilename gprof.info @settitle GNU gprof @setchapternewpage odd @ifinfo This file documents the gprof profiler of the GNU system. Copyright (C) 1988, 1992 Free Software Foundation, Inc. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. @ignore Permission is granted to process this file through Tex and print the results, provided the printed document carries copying permission notice identical to this one except for the removal of this paragraph (this paragraph not being relevant to the printed manual). @end ignore Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions. @end ifinfo @finalout @smallbook @titlepage @title GNU gprof @subtitle The @sc{gnu} Profiler @author Jay Fenlason and Richard Stallman @page This manual describes the @sc{gnu} profiler, @code{gprof}, and how you can use it to determine which parts of a program are taking most of the execution time. We assume that you know how to write, compile, and execute programs. @sc{gnu} @code{gprof} was written by Jay Fenlason. This manual was edited January 1993 by Jeffrey Osier. @vskip 0pt plus 1filll Copyright @copyright{} 1988, 1992 Free Software Foundation, Inc. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. @ignore Permission is granted to process this file through TeX and print the results, provided the printed document carries copying permission notice identical to this one except for the removal of this paragraph (this paragraph not being relevant to the printed manual). @end ignore Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the same conditions as for modified versions. @end titlepage @ifinfo @node Top @top Profiling a Program: Where Does It Spend Its Time? This manual describes the @sc{gnu} profiler, @code{gprof}, and how you can use it to determine which parts of a program are taking most of the execution time. We assume that you know how to write, compile, and execute programs. @sc{gnu} @code{gprof} was written by Jay Fenlason. @menu * Why:: What profiling means, and why it is useful. * Compiling:: How to compile your program for profiling. * Executing:: How to execute your program to generate the profile data file @file{gmon.out}. * Invoking:: How to run @code{gprof}, and how to specify options for it. * Flat Profile:: The flat profile shows how much time was spent executing directly in each function. * Call Graph:: The call graph shows which functions called which others, and how much time each function used when its subroutine calls are included. * Implementation:: How the profile data is recorded and written. * Sampling Error:: Statistical margins of error. How to accumulate data from several runs to make it more accurate. * Assumptions:: Some of @code{gprof}'s measurements are based on assumptions about your program that could be very wrong. * Incompatibilities:: (between GNU @code{gprof} and Unix @code{gprof}.) @end menu @end ifinfo @node Why @chapter Why Profile Profiling allows you to learn where your program spent its time and which functions called which other functions while it was executing. This information can show you which pieces of your program are slower than you expected, and might be candidates for rewriting to make your program execute faster. It can also tell you which functions are being called more or less often than you expected. This may help you spot bugs that had otherwise been unnoticed. Since the profiler uses information collected during the actual execution of your program, it can be used on programs that are too large or too complex to analyze by reading the source. However, how your program is run will affect the information that shows up in the profile data. If you don't use some feature of your program while it is being profiled, no profile information will be generated for that feature. Profiling has several steps: @itemize @bullet @item You must compile and link your program with profiling enabled. @xref{Compiling}. @item You must execute your program to generate a profile data file. @xref{Executing}. @item You must run @code{gprof} to analyze the profile data. @xref{Invoking}. @end itemize The next three chapters explain these steps in greater detail. The result of the analysis is a file containing two tables, the @dfn{flat profile} and the @dfn{call graph} (plus blurbs which briefly explain the contents of these tables). The flat profile shows how much time your program spent in each function, and how many times that function was called. If you simply want to know which functions burn most of the cycles, it is stated concisely here. @xref{Flat Profile}. The call graph shows, for each function, which functions called it, which other functions it called, and how many times. There is also an estimate of how much time was spent in the subroutines of each function. This can suggest places where you might try to eliminate function calls that use a lot of time. @xref{Call Graph}. @node Compiling @chapter Compiling a Program for Profiling The first step in generating profile information for your program is to compile and link it with profiling enabled. To compile a source file for profiling, specify the @samp{-pg} option when you run the compiler. (This is in addition to the options you normally use.) To link the program for profiling, if you use a compiler such as @code{cc} to do the linking, simply specify @samp{-pg} in addition to your usual options. The same option, @samp{-pg}, alters either compilation or linking to do what is necessary for profiling. Here are examples: @example cc -g -c myprog.c utils.c -pg cc -o myprog myprog.o utils.o -pg @end example The @samp{-pg} option also works with a command that both compiles and links: @example cc -o myprog myprog.c utils.c -g -pg @end example If you run the linker @code{ld} directly instead of through a compiler such as @code{cc}, you must specify the profiling startup file @file{/lib/gcrt0.o} as the first input file instead of the usual startup file @file{/lib/crt0.o}. In addition, you would probably want to specify the profiling C library, @file{/usr/lib/libc_p.a}, by writing @samp{-lc_p} instead of the usual @samp{-lc}. This is not absolutely necessary, but doing this gives you number-of-calls information for standard library functions such as @code{read} and @code{open}. For example: @example ld -o myprog /lib/gcrt0.o myprog.o utils.o -lc_p @end example If you compile only some of the modules of the program with @samp{-pg}, you can still profile the program, but you won't get complete information about the modules that were compiled without @samp{-pg}. The only information you get for the functions in those modules is the total time spent in them; there is no record of how many times they were called, or from where. This will not affect the flat profile (except that the @code{calls} field for the functions will be blank), but will greatly reduce the usefulness of the call graph. @node Executing @chapter Executing the Program to Generate Profile Data Once the program is compiled for profiling, you must run it in order to generate the information that @code{gprof} needs. Simply run the program as usual, using the normal arguments, file names, etc. The program should run normally, producing the same output as usual. It will, however, run somewhat slower than normal because of the time spent collecting and the writing the profile data. The way you run the program---the arguments and input that you give it---may have a dramatic effect on what the profile information shows. The profile data will describe the parts of the program that were activated for the particular input you use. For example, if the first command you give to your program is to quit, the profile data will show the time used in initialization and in cleanup, but not much else. You program will write the profile data into a file called @file{gmon.out} just before exiting. If there is already a file called @file{gmon.out}, its contents are overwritten. There is currently no way to tell the program to write the profile data under a different name, but you can rename the file afterward if you are concerned that it may be overwritten. In order to write the @file{gmon.out} file properly, your program must exit normally: by returning from @code{main} or by calling @code{exit}. Calling the low-level function @code{_exit} does not write the profile data, and neither does abnormal termination due to an unhandled signal. The @file{gmon.out} file is written in the program's @emph{current working directory} at the time it exits. This means that if your program calls @code{chdir}, the @file{gmon.out} file will be left in the last directory your program @code{chdir}'d to. If you don't have permission to write in this directory, the file is not written. You may get a confusing error message if this happens. (We have not yet replaced the part of Unix responsible for this; when we do, we will make the error message comprehensible.) @node Invoking @chapter @code{gprof} Command Summary After you have a profile data file @file{gmon.out}, you can run @code{gprof} to interpret the information in it. The @code{gprof} program prints a flat profile and a call graph on standard output. Typically you would redirect the output of @code{gprof} into a file with @samp{>}. You run @code{gprof} like this: @smallexample gprof @var{options} [@var{executable-file} [@var{profile-data-files}@dots{}]] [> @var{outfile}] @end smallexample @noindent Here square-brackets indicate optional arguments. If you omit the executable file name, the file @file{a.out} is used. If you give no profile data file name, the file @file{gmon.out} is used. If any file is not in the proper format, or if the profile data file does not appear to belong to the executable file, an error message is printed. You can give more than one profile data file by entering all their names after the executable file name; then the statistics in all the data files are summed together. The following options may be used to selectively include or exclude functions in the output: @table @code @item -a The @samp{-a} option causes @code{gprof} to suppress the printing of statically declared (private) functions. (These are functions whose names are not listed as global, and which are not visible outside the file/function/block where they were defined.) Time spent in these functions, calls to/from them, etc, will all be attributed to the function that was loaded directly before it in the executable file. @c This is compatible with Unix @code{gprof}, but a bad idea. This option affects both the flat profile and the call graph. @item -e @var{function_name} The @samp{-e @var{function}} option tells @code{gprof} to not print information about the function @var{function_name} (and its children@dots{}) in the call graph. The function will still be listed as a child of any functions that call it, but its index number will be shown as @samp{[not printed]}. More than one @samp{-e} option may be given; only one @var{function_name} may be indicated with each @samp{-e} option. @item -E @var{function_name} The @code{-E @var{function}} option works like the @code{-e} option, but time spent in the function (and children who were not called from anywhere else), will not be used to compute the percentages-of-time for the call graph. More than one @samp{-E} option may be given; only one @var{function_name} may be indicated with each @samp{-E} option. @item -f @var{function_name} The @samp{-f @var{function}} option causes @code{gprof} to limit the call graph to the function @var{function_name} and its children (and their children@dots{}). More than one @samp{-f} option may be given; only one @var{function_name} may be indicated with each @samp{-f} option. @item -F @var{function_name} The @samp{-F @var{function}} option works like the @code{-f} option, but only time spent in the function and its children (and their children@dots{}) will be used to determine total-time and percentages-of-time for the call graph. More than one @samp{-F} option may be given; only one @var{function_name} may be indicated with each @samp{-F} option. The @samp{-F} option overrides the @samp{-E} option. @item -k @var{from@dots{}} @var{to@dots{}} The @samp{-k} option allows you to delete from the profile any arcs from routine @var{from} to routine @var{to}. @item -z If you give the @samp{-z} option, @code{gprof} will mention all functions in the flat profile, even those that were never called, and that had no time spent in them. This is useful in conjunction with the @samp{-c} option for discovering which routines were never called. @end table The order of these options does not matter. Note that only one function can be specified with each @code{-e}, @code{-E}, @code{-f} or @code{-F} option. To specify more than one function, use multiple options. For example, this command: @example gprof -e boring -f foo -f bar myprogram > gprof.output @end example @noindent lists in the call graph all functions that were reached from either @code{foo} or @code{bar} and were not reachable from @code{boring}. There are a few other useful @code{gprof} options: @table @code @item -b If the @samp{-b} option is given, @code{gprof} doesn't print the verbose blurbs that try to explain the meaning of all of the fields in the tables. This is useful if you intend to print out the output, or are tired of seeing the blurbs. @item -c The @samp{-c} option causes the static call-graph of the program to be discovered by a heuristic which examines the text space of the object file. Static-only parents or children are indicated with call counts of @samp{0}. @item -d @var{num} The @samp{-d @var{num}} option specifies debugging options. @c @xref{debugging}. @item -s The @samp{-s} option causes @code{gprof} to summarize the information in the profile data files it read in, and write out a profile data file called @file{gmon.sum}, which contains all the information from the profile data files that @code{gprof} read in. The file @file{gmon.sum} may be one of the specified input files; the effect of this is to merge the data in the other input files into @file{gmon.sum}. @xref{Sampling Error}. Eventually you can run @code{gprof} again without @samp{-s} to analyze the cumulative data in the file @file{gmon.sum}. @item -T The @samp{-T} option causes @code{gprof} to print its output in ``traditional'' BSD style. @end table @node Flat Profile @chapter How to Understand the Flat Profile @cindex flat profile The @dfn{flat profile} shows the total amount of time your program spent executing each function. Unless the @samp{-z} option is given, functions with no apparent time spent in them, and no apparent calls to them, are not mentioned. Note that if a function was not compiled for profiling, and didn't run long enough to show up on the program counter histogram, it will be indistinguishable from a function that was never called. This is part of a flat profile for a small program: @smallexample @group Flat profile: Each sample counts as 0.01 seconds. % cumulative self self total time seconds seconds calls ms/call ms/call name 33.34 0.02 0.02 7208 0.00 0.00 open 16.67 0.03 0.01 244 0.04 0.12 offtime 16.67 0.04 0.01 8 1.25 1.25 memccpy 16.67 0.05 0.01 7 1.43 1.43 write 16.67 0.06 0.01 mcount 0.00 0.06 0.00 236 0.00 0.00 tzset 0.00 0.06 0.00 192 0.00 0.00 tolower 0.00 0.06 0.00 47 0.00 0.00 strlen 0.00 0.06 0.00 45 0.00 0.00 strchr 0.00 0.06 0.00 1 0.00 50.00 main 0.00 0.06 0.00 1 0.00 0.00 memcpy 0.00 0.06 0.00 1 0.00 10.11 print 0.00 0.06 0.00 1 0.00 0.00 profil 0.00 0.06 0.00 1 0.00 50.00 report @dots{} @end group @end smallexample @noindent The functions are sorted by decreasing run-time spent in them. The functions @samp{mcount} and @samp{profil} are part of the profiling aparatus and appear in every flat profile; their time gives a measure of the amount of overhead due to profiling. The sampling period estimates the margin of error in each of the time figures. A time figure that is not much larger than this is not reliable. In this example, the @samp{self seconds} field for @samp{mcount} might well be @samp{0} or @samp{0.04} in another run. @xref{Sampling Error}, for a complete discussion. Here is what the fields in each line mean: @table @code @item % time This is the percentage of the total execution time your program spent in this function. These should all add up to 100%. @item cumulative seconds This is the cumulative total number of seconds the computer spent executing this functions, plus the time spent in all the functions above this one in this table. @item self seconds This is the number of seconds accounted for by this function alone. The flat profile listing is sorted first by this number. @item calls This is the total number of times the function was called. If the function was never called, or the number of times it was called cannot be determined (probably because the function was not compiled with profiling enabled), the @dfn{calls} field is blank. @item self ms/call This represents the average number of milliseconds spent in this function per call, if this function is profiled. Otherwise, this field is blank for this function. @item total ms/call This represents the average number of milliseconds spent in this function and its descendants per call, if this function is profiled. Otherwise, this field is blank for this function. @item name This is the name of the function. The flat profile is sorted by this field alphabetically after the @dfn{self seconds} field is sorted. @end table @node Call Graph @chapter How to Read the Call Graph @cindex call graph The @dfn{call graph} shows how much time was spent in each function and its children. From this information, you can find functions that, while they themselves may not have used much time, called other functions that did use unusual amounts of time. Here is a sample call from a small program. This call came from the same @code{gprof} run as the flat profile example in the previous chapter. @smallexample @group granularity: each sample hit covers 2 byte(s) for 20.00% of 0.05 seconds index % time self children called name [1] 100.0 0.00 0.05 start [1] 0.00 0.05 1/1 main [2] 0.00 0.00 1/2 on_exit [28] 0.00 0.00 1/1 exit [59] ----------------------------------------------- 0.00 0.05 1/1 start [1] [2] 100.0 0.00 0.05 1 main [2] 0.00 0.05 1/1 report [3] ----------------------------------------------- 0.00 0.05 1/1 main [2] [3] 100.0 0.00 0.05 1 report [3] 0.00 0.03 8/8 timelocal [6] 0.00 0.01 1/1 print [9] 0.00 0.01 9/9 fgets [12] 0.00 0.00 12/34 strncmp [40] 0.00 0.00 8/8 lookup [20] 0.00 0.00 1/1 fopen [21] 0.00 0.00 8/8 chewtime [24] 0.00 0.00 8/16 skipspace [44] ----------------------------------------------- [4] 59.8 0.01 0.02 8+472 [4] 0.01 0.02 244+260 offtime [7] 0.00 0.00 236+1 tzset [26] ----------------------------------------------- @end group @end smallexample The lines full of dashes divide this table into @dfn{entries}, one for each function. Each entry has one or more lines. In each entry, the primary line is the one that starts with an index number in square brackets. The end of this line says which function the entry is for. The preceding lines in the entry describe the callers of this function and the following lines describe its subroutines (also called @dfn{children} when we speak of the call graph). The entries are sorted by time spent in the function and its subroutines. The internal profiling function @code{mcount} (@pxref{Flat Profile}) is never mentioned in the call graph. @menu * Primary:: Details of the primary line's contents. * Callers:: Details of caller-lines' contents. * Subroutines:: Details of subroutine-lines' contents. * Cycles:: When there are cycles of recursion, such as @code{a} calls @code{b} calls @code{a}@dots{} @end menu @node Primary @section The Primary Line The @dfn{primary line} in a call graph entry is the line that describes the function which the entry is about and gives the overall statistics for this function. For reference, we repeat the primary line from the entry for function @code{report} in our main example, together with the heading line that shows the names of the fields: @smallexample @group index % time self children called name @dots{} [3] 100.0 0.00 0.05 1 report [3] @end group @end smallexample Here is what the fields in the primary line mean: @table @code @item index Entries are numbered with consecutive integers. Each function therefore has an index number, which appears at the beginning of its primary line. Each cross-reference to a function, as a caller or subroutine of another, gives its index number as well as its name. The index number guides you if you wish to look for the entry for that function. @item % time This is the percentage of the total time that was spent in this function, including time spent in subroutines called from this function. The time spent in this function is counted again for the callers of this function. Therefore, adding up these percentages is meaningless. @item self This is the total amount of time spent in this function. This should be identical to the number printed in the @code{seconds} field for this function in the flat profile. @item children This is the total amount of time spent in the subroutine calls made by this function. This should be equal to the sum of all the @code{self} and @code{children} entries of the children listed directly below this function. @item called This is the number of times the function was called. If the function called itself recursively, there are two numbers, separated by a @samp{+}. The first number counts non-recursive calls, and the second counts recursive calls. In the example above, the function @code{report} was called once from @code{main}. @item name This is the name of the current function. The index number is repeated after it. If the function is part of a cycle of recursion, the cycle number is printed between the function's name and the index number (@pxref{Cycles}). For example, if function @code{gnurr} is part of cycle number one, and has index number twelve, its primary line would be end like this: @example gnurr [12] @end example @end table @node Callers, Subroutines, Primary, Call Graph @section Lines for a Function's Callers A function's entry has a line for each function it was called by. These lines' fields correspond to the fields of the primary line, but their meanings are different because of the difference in context. For reference, we repeat two lines from the entry for the function @code{report}, the primary line and one caller-line preceding it, together with the heading line that shows the names of the fields: @smallexample index % time self children called name @dots{} 0.00 0.05 1/1 main [2] [3] 100.0 0.00 0.05 1 report [3] @end smallexample Here are the meanings of the fields in the caller-line for @code{report} called from @code{main}: @table @code @item self An estimate of the amount of time spent in @code{report} itself when it was called from @code{main}. @item children An estimate of the amount of time spent in subroutines of @code{report} when @code{report} was called from @code{main}. The sum of the @code{self} and @code{children} fields is an estimate of the amount of time spent within calls to @code{report} from @code{main}. @item called Two numbers: the number of times @code{report} was called from @code{main}, followed by the total number of nonrecursive calls to @code{report} from all its callers. @item name and index number The name of the caller of @code{report} to which this line applies, followed by the caller's index number. Not all functions have entries in the call graph; some options to @code{gprof} request the omission of certain functions. When a caller has no entry of its own, it still has caller-lines in the entries of the functions it calls. If the caller is part of a recursion cycle, the cycle number is printed between the name and the index number. @end table If the identity of the callers of a function cannot be determined, a dummy caller-line is printed which has @samp{} as the ``caller's name'' and all other fields blank. This can happen for signal handlers. @c What if some calls have determinable callers' names but not all? @c FIXME - still relevant? @node Subroutines, Cycles, Callers, Call Graph @section Lines for a Function's Subroutines A function's entry has a line for each of its subroutines---in other words, a line for each other function that it called. These lines' fields correspond to the fields of the primary line, but their meanings are different because of the difference in context. For reference, we repeat two lines from the entry for the function @code{main}, the primary line and a line for a subroutine, together with the heading line that shows the names of the fields: @smallexample index % time self children called name @dots{} [2] 100.0 0.00 0.05 1 main [2] 0.00 0.05 1/1 report [3] @end smallexample Here are the meanings of the fields in the subroutine-line for @code{main} calling @code{report}: @table @code @item self An estimate of the amount of time spent directly within @code{report} when @code{report} was called from @code{main}. @item children An estimate of the amount of time spent in subroutines of @code{report} when @code{report} was called from @code{main}. The sum of the @code{self} and @code{children} fields is an estimate of the total time spent in calls to @code{report} from @code{main}. @item called Two numbers, the number of calls to @code{report} from @code{main} followed by the total number of nonrecursive calls to @code{report}. @item name The name of the subroutine of @code{main} to which this line applies, followed by the subroutine's index number. If the caller is part of a recursion cycle, the cycle number is printed between the name and the index number. @end table @node Cycles,, Subroutines, Call Graph @section How Mutually Recursive Functions Are Described @cindex cycle @cindex recursion cycle The graph may be complicated by the presence of @dfn{cycles of recursion} in the call graph. A cycle exists if a function calls another function that (directly or indirectly) calls (or appears to call) the original function. For example: if @code{a} calls @code{b}, and @code{b} calls @code{a}, then @code{a} and @code{b} form a cycle. Whenever there are call-paths both ways between a pair of functions, they belong to the same cycle. If @code{a} and @code{b} call each other and @code{b} and @code{c} call each other, all three make one cycle. Note that even if @code{b} only calls @code{a} if it was not called from @code{a}, @code{gprof} cannot determine this, so @code{a} and @code{b} are still considered a cycle. The cycles are numbered with consecutive integers. When a function belongs to a cycle, each time the function name appears in the call graph it is followed by @samp{}. The reason cycles matter is that they make the time values in the call graph paradoxical. The ``time spent in children'' of @code{a} should include the time spent in its subroutine @code{b} and in @code{b}'s subroutines---but one of @code{b}'s subroutines is @code{a}! How much of @code{a}'s time should be included in the children of @code{a}, when @code{a} is indirectly recursive? The way @code{gprof} resolves this paradox is by creating a single entry for the cycle as a whole. The primary line of this entry describes the total time spent directly in the functions of the cycle. The ``subroutines'' of the cycle are the individual functions of the cycle, and all other functions that were called directly by them. The ``callers'' of the cycle are the functions, outside the cycle, that called functions in the cycle. Here is an example portion of a call graph which shows a cycle containing functions @code{a} and @code{b}. The cycle was entered by a call to @code{a} from @code{main}; both @code{a} and @code{b} called @code{c}. @smallexample index % time self children called name ---------------------------------------- 1.77 0 1/1 main [2] [3] 91.71 1.77 0 1+5 [3] 1.02 0 3 b [4] 0.75 0 2 a [5] ---------------------------------------- 3 a [5] [4] 52.85 1.02 0 0 b [4] 2 a [5] 0 0 3/6 c [6] ---------------------------------------- 1.77 0 1/1 main [2] 2 b [4] [5] 38.86 0.75 0 1 a [5] 3 b [4] 0 0 3/6 c [6] ---------------------------------------- @end smallexample @noindent (The entire call graph for this program contains in addition an entry for @code{main}, which calls @code{a}, and an entry for @code{c}, with callers @code{a} and @code{b}.) @smallexample index % time self children called name [1] 100.00 0 1.93 0 start [1] 0.16 1.77 1/1 main [2] ---------------------------------------- 0.16 1.77 1/1 start [1] [2] 100.00 0.16 1.77 1 main [2] 1.77 0 1/1 a [5] ---------------------------------------- 1.77 0 1/1 main [2] [3] 91.71 1.77 0 1+5 [3] 1.02 0 3 b [4] 0.75 0 2 a [5] 0 0 6/6 c [6] ---------------------------------------- 3 a [5] [4] 52.85 1.02 0 0 b [4] 2 a [5] 0 0 3/6 c [6] ---------------------------------------- 1.77 0 1/1 main [2] 2 b [4] [5] 38.86 0.75 0 1 a [5] 3 b [4] 0 0 3/6 c [6] ---------------------------------------- 0 0 3/6 b [4] 0 0 3/6 a [5] [6] 0.00 0 0 6 c [6] ---------------------------------------- @end smallexample The @code{self} field of the cycle's primary line is the total time spent in all the functions of the cycle. It equals the sum of the @code{self} fields for the individual functions in the cycle, found in the entry in the subroutine lines for these functions. The @code{children} fields of the cycle's primary line and subroutine lines count only subroutines outside the cycle. Even though @code{a} calls @code{b}, the time spent in those calls to @code{b} is not counted in @code{a}'s @code{children} time. Thus, we do not encounter the problem of what to do when the time in those calls to @code{b} includes indirect recursive calls back to @code{a}. The @code{children} field of a caller-line in the cycle's entry estimates the amount of time spent @emph{in the whole cycle}, and its other subroutines, on the times when that caller called a function in the cycle. The @code{calls} field in the primary line for the cycle has two numbers: first, the number of times functions in the cycle were called by functions outside the cycle; second, the number of times they were called by functions in the cycle (including times when a function in the cycle calls itself). This is a generalization of the usual split into nonrecursive and recursive calls. The @code{calls} field of a subroutine-line for a cycle member in the cycle's entry says how many time that function was called from functions in the cycle. The total of all these is the second number in the primary line's @code{calls} field. In the individual entry for a function in a cycle, the other functions in the same cycle can appear as subroutines and as callers. These lines show how many times each function in the cycle called or was called from each other function in the cycle. The @code{self} and @code{children} fields in these lines are blank because of the difficulty of defining meanings for them when recursion is going on. @node Implementation, Sampling Error, Call Graph, Top @chapter Implementation of Profiling Profiling works by changing how every function in your program is compiled so that when it is called, it will stash away some information about where it was called from. From this, the profiler can figure out what function called it, and can count how many times it was called. This change is made by the compiler when your program is compiled with the @samp{-pg} option. Profiling also involves watching your program as it runs, and keeping a histogram of where the program counter happens to be every now and then. Typically the program counter is looked at around 100 times per second of run time, but the exact frequency may vary from system to system. A special startup routine allocates memory for the histogram and sets up a clock signal handler to make entries in it. Use of this special startup routine is one of the effects of using @samp{gcc @dots{} -pg} to link. The startup file also includes an @samp{exit} function which is responsible for writing the file @file{gmon.out}. Number-of-calls information for library routines is collected by using a special version of the C library. The programs in it are the same as in the usual C library, but they were compiled with @samp{-pg}. If you link your program with @samp{gcc @dots{} -pg}, it automatically uses the profiling version of the library. The output from @code{gprof} gives no indication of parts of your program that are limited by I/O or swapping bandwidth. This is because samples of the program counter are taken at fixed intervals of run time. Therefore, the time measurements in @code{gprof} output say nothing about time that your program was not running. For example, a part of the program that creates so much data that it cannot all fit in physical memory at once may run very slowly due to thrashing, but @code{gprof} will say it uses little time. On the other hand, sampling by run time has the advantage that the amount of load due to other users won't directly affect the output you get. @node Sampling Error, Assumptions, Implementation, Top @chapter Statistical Inaccuracy of @code{gprof} Output The run-time figures that @code{gprof} gives you are based on a sampling process, so they are subject to statistical inaccuracy. If a function runs only a small amount of time, so that on the average the sampling process ought to catch that function in the act only once, there is a pretty good chance it will actually find that function zero times, or twice. By contrast, the number-of-calls figures are derived by counting, not sampling. They are completely accurate and will not vary from run to run if your program is deterministic. The @dfn{sampling period} that is printed at the beginning of the flat profile says how often samples are taken. The rule of thumb is that a run-time figure is accurate if it is considerably bigger than the sampling period. The actual amount of error is usually more than one sampling period. In fact, if a value is @var{n} times the sampling period, the @emph{expected} error in it is the square-root of @var{n} sampling periods. If the sampling period is 0.01 seconds and @code{foo}'s run-time is 1 second, the expected error in @code{foo}'s run-time is 0.1 seconds. It is likely to vary this much @emph{on the average} from one profiling run to the next. (@emph{Sometimes} it will vary more.) This does not mean that a small run-time figure is devoid of information. If the program's @emph{total} run-time is large, a small run-time for one function does tell you that that function used an insignificant fraction of the whole program's time. Usually this means it is not worth optimizing. One way to get more accuracy is to give your program more (but similar) input data so it will take longer. Another way is to combine the data from several runs, using the @samp{-s} option of @code{gprof}. Here is how: @enumerate @item Run your program once. @item Issue the command @samp{mv gmon.out gmon.sum}. @item Run your program again, the same as before. @item Merge the new data in @file{gmon.out} into @file{gmon.sum} with this command: @example gprof -s @var{executable-file} gmon.out gmon.sum @end example @item Repeat the last two steps as often as you wish. @item Analyze the cumulative data using this command: @example gprof @var{executable-file} gmon.sum > @var{output-file} @end example @end enumerate @node Assumptions, Incompatibilities, Sampling Error, Top @chapter Estimating @code{children} Times Uses an Assumption Some of the figures in the call graph are estimates---for example, the @code{children} time values and all the the time figures in caller and subroutine lines. There is no direct information about these measurements in the profile data itself. Instead, @code{gprof} estimates them by making an assumption about your program that might or might not be true. The assumption made is that the average time spent in each call to any function @code{foo} is not correlated with who called @code{foo}. If @code{foo} used 5 seconds in all, and 2/5 of the calls to @code{foo} came from @code{a}, then @code{foo} contributes 2 seconds to @code{a}'s @code{children} time, by assumption. This assumption is usually true enough, but for some programs it is far from true. Suppose that @code{foo} returns very quickly when its argument is zero; suppose that @code{a} always passes zero as an argument, while other callers of @code{foo} pass other arguments. In this program, all the time spent in @code{foo} is in the calls from callers other than @code{a}. But @code{gprof} has no way of knowing this; it will blindly and incorrectly charge 2 seconds of time in @code{foo} to the children of @code{a}. @c FIXME - has this been fixed? We hope some day to put more complete data into @file{gmon.out}, so that this assumption is no longer needed, if we can figure out how. For the nonce, the estimated figures are usually more useful than misleading. @node Incompatibilities, , Assumptions, Top @chapter Incompatibilities with Unix @code{gprof} @sc{gnu} @code{gprof} and Berkeley Unix @code{gprof} use the same data file @file{gmon.out}, and provide essentially the same information. But there are a few differences. @itemize @bullet @item For a recursive function, Unix @code{gprof} lists the function as a parent and as a child, with a @code{calls} field that lists the number of recursive calls. @sc{gnu} @code{gprof} omits these lines and puts the number of recursive calls in the primary line. @item When a function is suppressed from the call graph with @samp{-e}, @sc{gnu} @code{gprof} still lists it as a subroutine of functions that call it. @ignore - it does this now @item The function names printed in @sc{gnu} @code{gprof} output do not include the leading underscores that are added internally to the front of all C identifiers on many operating systems. @end ignore @item The blurbs, field widths, and output formats are different. @sc{gnu} @code{gprof} prints blurbs after the tables, so that you can see the tables without skipping the blurbs. @contents @bye NEEDS AN INDEX Still relevant? The @file{gmon.out} file is written in the program's @emph{current working directory} at the time it exits. This means that if your program calls @code{chdir}, the @file{gmon.out} file will be left in the last directory your program @code{chdir}'d to. If you don't have permission to write in this directory, the file is not written. You may get a confusing error message if this happens. (We have not yet replaced the part of Unix responsible for this; when we do, we will make the error message comprehensible.) -k from to...? -d debugging...? should this be documented? -T - "traditional BSD style": How is it different? Should the differences be documented? what is this about? (and to think, I *wrote* it...) @item -c The @samp{-c} option causes the static call-graph of the program to be discovered by a heuristic which examines the text space of the object file. Static-only parents or children are indicated with call counts of @samp{0}. example flat file adds up to 100.01%... note: time estimates now only go out to one decimal place (0.0), where they used to extend two (78.67).