2008-05-19 Ian Lance Taylor * options.h (class General_options): Add -z relro. * layout.cc (Layout::Layout): Initialize relro_segment_. (Layout::add_output_section_data): Return the output section. (Layout::make_output_section): Rcognize relro sections and mark them appropriately. (Layout::attach_allocated_section_to_segment): Put relro sections in a PT_GNU_RELRO segment. (Layout::create_initial_dynamic_sections): Mark the .dynamic section as relro. (Layout::segment_precedes): Sort PT_GNU_RELRO segments after PT_TLS segments. (Layout::linkonce_mapping): Map d.rel.ro.local to .data.rel.ro.local. (Layout::output_section_name): Us .data.rel.ro.local for any section which begins with that. * layout.h (class Layout): Update add_output_section_data declaration. Add relro_segment_ field. * output.cc (Output_section::Output_section): Initialize is_relro_ and is_relro_local_ fields. (Output_segment::add_output_section): Group relro sections. (Output_segment::is_first_section_relro): New function. (Output_segment::maximum_alignment): If there is a relro section, align the segment to the common page size. (Output_segment::set_section_addresses): Track whether we are looking at relro sections. If the last section is a relro section, align to the common page size. (Output_segment::set_section_list_addresses): Add in_relro parameter. Change all callers. Align to the page size when moving from relro to non-relro section. (Output_segment::set_offset): Align memsz of a PT_GNU_RELRO segment. * output.h (class Output_section): Add is_relro_ and is_relro_local_ fields. (Output_section::is_relro): New function. (Output_section::set_is_relro): New function. (Output_section::is_relro_local): New function. (Output_section::set_is_relro_local): New function. (class Output_segment): Update declarations. * i386.cc (Target_i386::got_section): Mark .got section as relro. * sparc.cc (Target_sparc::got_section): Likewise. * x86_64.cc (Target_x86_64::got_section): Likewise. * testsuite/relro_test_main.cc: New file. * testsuite/relro_test.cc: New file. * testsuite/Makefile.am (check_PROGRAMS): Add relro_test. (relro_test_SOURCES, relro_test_DEPENDENCIES): New variables. (relro_test_LDFLAGS, relro_test_LDADD): New variables. (relro_test.so, relro_test_pic.o): New targets. * testsuite/Makefile.in: Rebuild. 2008-05-16 Ian Lance Taylor * output.cc (Output_segment::add_output_section): Remove front parameter. * output.h (class Output_segment): Remove add_initial_output_section and overloaded add_output_section. Update declaration of remaining add_output_section. * layout.cc (Layout::create_interp): Call add_output_section rather than add_initial_output_section. (Layout::finish_dynamic_section): Likewise. * i386.cc (Target_i386::Relocate::relocate_tls): Set dynamic type for TLS_GOTDESC and TLS_DESC_CALL. Only optimize TLS_LDO_32 if we know the dynamic type. * x86_64.cc (Target_x86_64::Relocate): Add saw_tls_block_reloc_ field. Initialize it in constructor. (Target_x86_64::Relocate::relocate_tls): Record that we saw a TLS block reloc for TLSGD, GOTPC32_TLSDESC, TLSDESC_CALL, and TLSLD. Only optimize DTPOFF32 and DTPOFF64 if we have seen a TLS block reloc. * output.cc (Output_reloc::get_address): Change return type to Elf_Addr. * output.h (class Output_reloc): Update get_address declaration. * x86_64.cc (Output_data_plt_x86_64::do_write): Use 64-bit types for section addresses. 2008-05-09 Ian Lance Taylor PR 6493 * gold.cc (gold_nomem): Use return value of write. 2008-05-08 Ian Lance Taylor * symtab.c (Symbol::init_base_output_data): Add version parameter. Change all callers. (Symbol::init_base_output_segment): Likewise. (Symbol::init_base_constant): Likewise. (Symbol::init_base_undefined): Likewise. (Sized_symbol::init_output_data): Likewise. (Sized_symbol::init_output_segment): Likewise. (Sized_symbol::init_constant): Likewise. (Sized_symbol::init_undefined): Likewise. (Symbol_table::do_define_in_output_data): If the new symbol has a version, mark it as the default. (Symbol_table::do_define_in_output_segment): Likewise. (Symbol_table::do_define_as_constant): Likewise. * symtab.h (class Symbol): Update declarations. (class Sized_symbol): Likewise. * resolve.cc (Symbol::override_version): New function. (Symbol::override_base: Call override_version. (Symbol::override_base_with_special): Likewise. * testsuite/ver_script_8.script: New file. * testsuite/Makefile.am (check_PROGRAMS): Add ver_test_8. (ver_test_8_SOURCES, ver_test_8_DEPENDENCIES): Define. (ver_test_8_LDFLAGS, ver_test_8_LDADD): Define. (ver_test_8_1.so, ver_test_8_2.so): New targets. 2008-05-06 Ian Lance Taylor PR 6049 * options.h (DEFINE_set): Add VARNAME_begin and VARNAME_end functions. (class General_options): Remove existing --undefined, and add --no-undefined instead. Add new --undefined as synonym for -u. * archive.cc (Archive::add_symbols): Check whether symbol was named with -u. * gold.cc (queue_middle_tasks): Add -u symbols to symbol table. * symtab.h (class Symbol): Rename CONSTANT to IS_CONSTANT; change all uses. Add IS_UNDEFINED. Update declarations to split different versions of init_base. Declare init_base_undefined. (Symbol::is_defined): Handle IS_UNDEFINED. (Symbol::is_undefined): Likewise. (Symbol::is_weak_undefined): Call is_undefined. (Symbol::is_absolute): Handle IS_CONSTANT. (class Sized_symbol): Update declarations to split different versions of init. Declare init_undefined. (class Symbol_table): Declare new functions. * symtab.cc (Symbol::init_base_object): Rename from init_base. Change all callers. (Symbol::init_base_output_data): Likewise. (Symbol::init_base_output_segment): Likewise. (Symbol::init_base_constant): Likewise. (Symbol::init_base_undefined): New function. (Sized_symbol::init_object): Rename from init. Change all callers. (Sized_symbol::init_output_data): Likewise. (Sized_symbol::init_output_segment): Likewise. (Sized_symbol::init_constant): Likewise. (Sized_symbol::init_undefined): New function. (Symbol_table::add_undefined_symbols_from_command_line): New function. (Symbol_table::do_add_undefined_symbols_from_command_line): New function. (Symbol::final_value_is_known): Handle IS_UNDEFINED. (Symbol::output_section): Likewise. (Symbol::set_output_section): Likewise. (Symbol_table::sized_finalize_symbol): Likewise. (Symbol_table::sized_write_globals): Likewise. * resolve.cc (Symbol_table::should_override): Likewise. (Symbol::override_base_with_special): Likewise. * symtab.cc (Symbol_table::add_from_dynobj): If we see a protected symbol, change it to have default visibility. * testsuite/protected_1.cc: New file. * testsuite/protected_2.cc: New file. * testsuite/protected_3.cc: New file. * testsuite/protected_main_1.cc: New file. * testsuite/protected_main_2.cc: New file. * testsuite/protected_main_3.cc: New file. * testsuite/Makefile.am (check_PROGRAMS): Add protected_1. (protected_1_SOURCES, protected_1_DEPENDENCIES): Define. (protected_1_LDFLAGS, protected_1_LDADD): Define. (protected_1.so): New target. (protected_1_pic.o, protected_2_pic.o): New targets. (protected_3_pic.o): New target. (check_PROGRAMS): Add protected_2. (protected_2_SOURCES, protected_2_DEPENDENCIES): Define. (protected_2_LDFLAGS, protected_2_LDADD): Define. * testsuite/Makefile.in: Rebuild. * options.h (DEFINE_var): Add set_user_set_##varname__. (DEFINE_bool_alias): New macro. (class General_options): Define -Bstatic using DEFINE_bool_alias rather than DEFINE_special. Add --undefined as an alias for -z defs. * options.cc (General_options::parse_Bstatic): Remove. * options.h (class General_options): Add --fatal-warnings. * main.cc (main): Implement --fatal-warnings. * errors.h (Errors::warning_count): New function. * options.h (class General_options): Add -Bsymbolic-functions. * symtab.h (Symbol::is_preemptible): Check for -Bsymbolic-functions. 2008-05-05 Ian Lance Taylor * options.h (DEFINE_bool): For DASH_Z, create the negative option as noVARNAME rather than no-VARNAME. (class General_options): Add option -z combreloc. * output.h (class Output_reloc) [SHT_REL]: Declare compare and get_address. (Output_reloc::sort_before) [SHT_REL]: New function. (Output_reloc::sort_before) [SHT_RELA]: New function. (class Output_data_reloc_base): Add sort_relocs_ field. Define Sort_relocs_comparison. (Output_data_reloc_base::Output_data_reloc_base): Add sort_relocs parameter. Change all callers. (Output_data_reloc::Output_data_reloc) [both versions]: Add sort_relocs parameter. Change all callers. * output.cc (Output_reloc::get_address): New function, broken out of write_rel. (Output_reloc::write_rel): Call it. (Output_reloc::compare): New function. (Output_data_reloc_base::do_write): Optionally sort relocs. * configure.ac: If targ_extra_obj is set, link it in. * configure.tgt: Initialize all variables. (x86_64*): Set targ_extra_obj and targ_extra_size. * configure: Rebuild. * object.cc (Sized_relobj::include_section_group): Adjust section indexes read from group data. Build vector to pass to layout_group. * layout.cc (Layout::layout_group): Add flags and shndxes parameters. Remove contents parameter. Change caller. Update explicit instantiations. * layout.h (class Layout): Update layout_group declaration. * output.cc (Output_data_group::Output_data_group): Add flags and input_shndxes parameters. Remove contents parameter. Change caller. (Output_data_group::do_write): Change input_sections_ to input_shndxes_. * output.h (class Output_data_group): Update constructor declaration. Rename input_sections_ to input_shndxes_. * testsuite/many_sections_test.cc: Add template. 2008-04-30 Cary Coutant * target-reloc.h (relocate_section): Fix dead-pointer bug. * layout.cc (Layout::include_section): Refactored check for debug info section. (Layout::add_comdat): Add new parameters. Change type of signature parameter. Add object and shndx to signatures table. (Layout::find_kept_object): New function. * layout.h: Include . (Layout::is_debug_info_section): New function. (Layout::add_comdat): Add new parameters. (Layout::find_kept_object): New function. (Layout::Kept_section): New struct. (Layout::Signatures): Change type of map range. * object.cc (Relobj::output_section_address): New function. (Sized_relobj::include_section_group): Add new parameters. Change calls to Layout::add_comdat. Change to build table of kept comdat groups and table mapping discarded sections to kept sections. (Sized_relobj::include_linkonce_section): Likewise. Add new parameter. (Sized_relobj::do_layout): Change calls to include_section_group and include_linkonce_section. (Sized_relobj::do_finalize_local_symbols): Do not set local symbol value to zero when section is discarded. (Sized_relobj::map_to_kept_section): New function. * object.h (Relobj::output_section_address): New function. (Relobj::Comdat_group): New type. (Relobj::find_comdat_group): New function. (Relobj::Comdat_group_table): New type. (Relobj::Kept_comdat_section): New type. (Relobj::Kept_comdat_section_table): New type. (Relobj::add_comdat_group): New function. (Relobj::set_kept_comdat_section): New function. (Relobj::get_kept_comdat_section): New function. (Relobj::comdat_groups_): New field. (Relobj::kept_comdat_sections_): New field. (Symbol_value::input_value): Update comment. (Sized_relobj::map_to_kept_section) New function. (Sized_relobj::include_linkonce_section): Add new parameter. * target-reloc.h (Comdat_behavior): New type. (get_comdat_behavior): New function. (relocate_section): Add code to map a discarded section to the corresponding kept section when applying a relocation. 2008-04-30 Craig Silverstein * dwarf_reader.cc (next_generation_count): New static var. (Addr2line_cache_entry): New struct. (addr2line_cache): New static var. (Dwarf_line_info::one_addr2line): Added caching. (Dwarf_line_info::clear_addr2line_cache): New function. * dwarf_reader.h (Dwarf_line_info::one_addr2line): Add cache-size parameter. (Dwarf_line_info::one_addr2line_cache): New function. * symtab.cc (Symbol_table::detect_odr_violations): Pass new cache-size argument to one_addr2line(), and clear cache. 2008-04-28 Cary Coutant * i386.cc (Relocate::relocate): Fix typos for R_386_PC16 and R_386_PC8 relocations. 2008-04-23 Ian Lance Taylor * object.cc (Sized_relobj::include_section_group): Check for invalid section group. * object.cc (make_elf_object): Correct test for 64-bit ELF file header size. * readsyms.cc (Read_symbols::do_read_symbols): Use get_view rather than read for file header. * archive.cc (Archive::include_member): Likewise. 2008-04-23 Paolo Bonzini * aclocal.m4: Regenerate. * configure: Regenerate. 2008-04-19 Ian Lance Taylor * version.cc (version_string): Bump to 1.6. * testsuite/Makefile.am (many_sections_r_test): New target. (many_sections_r_test_SOURCES): Remove. (many_sections_r_test_DEPENDENCIES): Remove. (many_sections_r_test_LDFLAGS): Remove. (many_sections_r_test_LDADD): Remove. * object.cc (Sized_relobj::do_add_symbols): Always pass local_symbol_count_ to add_from_relobj. * testsuite/Makefile.am (many_sections_check.h): Only check one in every thousand variables. * testsuite/Makefile.in: Rebuild. * object.cc (Xindex::initialize_symtab_xindex): New function. (Xindex::read_symtab_xindex): New function. (Xindex::sym_xindex_to_shndx): New function. (Sized_relobj::find_symtab): Pick up SHT_SYMTAB_SHNDX section if available. (Sized_relobj::do_initialize_xindex): New function. (Sized_relobj::do_read_symbols): Adjust section links. (Sized_relobj::symbol_section_and_value): Add is_ordinary parameter. Change all callers. (Sized_relobj::include_section_group): Adjust section links and symbol section indexes. (Sized_relobj::do_layout): Adjust section links. (Sized_relobj::do_count_local_symbols): Adjust section links and symbol section indexes. (Sized_relobj::do_finalize_local_symbols): Distinguish between ordinary and special symbols. (Sized_relobj::write_local_symbols): Add symtab_xindex and dynsym_xindex parameters. Change all callers. Adjust section links. Use SHN_XINDEX when needed. (Sized_relobj::get_symbol_location_info): Adjust section links. Don't get fooled by special symbols. * object.h (class Xindex): Define. (class Object): Add xindex_ parameter. Declare virtual functoin do_initialize_xindex. (Object::adjust_sym_shndx): New function. (Object::set_xindex): New protected function. (class Symbol_value): Add is_ordinary_shndx_ field. (Symbol_value::Symbol_value): Initialize is_ordinary_shndx_. (Symbol_value::value): Assert ordinary section. (Symbol_value::initialize_input_to_output_map): Likewise. (Symbol_value::set_input_shndx): Add is_ordinary parameter. Change all callers. (Symbol_value::input_shndx): Add is_ordinary parameter. Change all callers. (class Sized_relobj): Update declarations. (Sized_relobj::local_symbol_input_shndx): Add is_ordinary parameter. Change all callers. (Sized_relobj::adjust_shndx): New function. * dynobj.cc (Sized_dynobj::Sized_dynobj): Initialize dynsym_shndx_ field. (Sized_dynobj::find_dynsym_sections): Remove pdynsym_shndx parameter. Change all callers. Pick up SHT_DYNSYM_SHNDX section for SHT_DYNSYM section if available. Set dynsym_shndx_ field. (Sized_dynobj::read_dynsym_section): Adjust section links. (Sized_dynobj::read_dynamic): Likewise. (Sized_dynobj::do_read_symbols): Use dynsym_shndx_ field. Adjust section links. (Sized_dynobj::do_initialize_xindex): New function. * dynobj.h (class Sized_dynobj): Add dynsym_shndx_ field. Declare do_initialize_xindex. (Sized_dynobj::adjust_shndx): New function. * layout.cc (Layout::Layout): Initialize symtab_xindex_ and dynsym_xindex_ fields. (Layout::finalize): Add a call to set_section_indexes before creating the symtab sections. (Layout::set_section_indexes): Don't do anything if the section already has a section index. (Layout::create_symtab_sections): Add shnum parameter. Change caller. Create .symtab_shndx section if needed. (Layout::create_shdrs): Add shstrtab_section parameter. Change caller. (Layout::allocated_output_section_count): New function. (Layout::create_dynamic_symtab): Create .dynsym_shndx section if needed. * layout.h (class Layout): Add symtab_xindex_ and dynsym_xindex_ fields. Update declarations. (Layout::symtab_xindex): New function. (Layout::dynsym_xindex): New function. (class Write_symbols_task): Add layout_ field. (Write_symbols_task::Write_symbols_task): Add layout parameter. Change caller. * output.cc (Output_section_headers::Output_section_headers): Add shstrtab_section parameter. Change all callers. (Output_section_headers::do_sized_write): Store overflow values for section count and section string table section index in section header zero. (Output_file_header::do_sized_write): Check for overflow of section count and section string table section index. (Output_symtab_xindex::do_write): New function. (Output_symtab_xindex::endian_do_write): New function. * output.h (class Output_section_headers): Add shstrtab_section_. Update declarations. (class Output_symtab_xindex): Define. (Output_section::has_out_shndx): New function. * symtab.cc (Symbol::init_fields): Initialize is_ordinary_shndx_ field. (Symbol::init_base): Add st_shndx and is_ordinary parameters. Change all callers. (Sized_symbol::init): Likewise. (Symbol::output_section): Check for ordinary symbol. (Symbol_table::add_from_object): Remove orig_sym parameter. Add st_shndx, is_ordinary, and orig_st_shndx parameters. Change all callers. (Symbol_table::add_from_relobj): Add symndx_offset parameter. Change all callers. Simplify handling of symbols from sections not included in the link. (Symbol_table::add_from_dynobj): Handle ordinary symbol distinction. (Weak_alias_sorter::operator()): Assert that symbols are ordinary. (Symbol_table::sized_finalize_symbol): Handle ordinary symbol distinction. (Symbol_table::write_globals): Add symtab_xindex and dynsym_xindex parameters. Change all callers. (Symbol_table::sized_write_globals): Likewise. Handle ordinary symbol distinction. Use SHN_XINDEX when needed. (Symbol_table::write_section_symbol): Add symtab_xindex parameter. Change all callers. (Symbol_table::sized_write_section_symbol): Likewise. Use SHN_XINDEX when needed. * symtab.h (class Symbol): Add is_ordinary_shndx_ field. Update declarations. (Symbol::shndx): Add is_ordinary parameter. Change all callers. (Symbol::is_defined): Check is_ordinary. (Symbol::is_undefined, Symbol::is_weak_undefined): Likewise. (Symbol::is_absolute, Symbol::is_common): Likewise. (class Sized_symbol): Update declarations. (class Symbol_table): Update declarations. * resolve.cc (Symbol::override_base): Add st_shndx and is_ordinary parameters. Change all callers. (Sized_symbol::override): Likewise. (Symbol_table::override): Likewise. (symbol_to_bits): Add is_ordinary parameter. Change all callers. (Symbol_table::resolve): Remove orig_sym parameter. Add st_shndx, is_ordinary, and orig_st_shndx parameters. Change all callers. * copy-relocs.cc (Copy_relocs::emit_copy_reloc): Require symbol to be in an ordinary section. * dwarf_reader.cc (Sized_dwarf_line_info::symbol_section): Add object and is_ordinary parameters. Change all callers. (Sized_dwarf_line_info::read_relocs): Add object parameter. Change all callers. Don't add undefined or non-ordinary symbols to reloc_map_. (Sized_dwarf_line_info::read_line_mappings): Add object parameter. Change all callers. * dwarf_reader.h (class Sized_dwarf_line_info): Update declarations. * ehframe.cc (Eh_frame::read_fde): Check for ordinary symbol. * reloc.cc (Sized_relobj::do_read_relocs): Adjust section links. (Sized_relobj::relocate_sections): Likewise. * target-reloc.h (scan_relocs): Adjust section symbol index. (scan_relocatable_relocs): Likewise. * i386.cc (Scan::local): Check for ordinary symbols. * sparc.cc (Scan::local): Likewise. * x86_64.cc (Scan::local): Likewise. * testsuite/binary_unittest.cc (Sized_binary_test): Update calls to symbol_section_and_value. * testsuite/many_sections_test.cc: New file. * testsuite/Makefile.am (BUILT_SOURCES): Define. (check_PROGRAMS): Add many_sections_test. (many_sections_test_SOURCES): Define. (many_sections_test_DEPENDENCIES): Define. (many_sections_test_LDFLAGS): Define. (BUILT_SOURCES): Add many_sections_define.h. (many_sections_define.h): New target. (BUILT_SOURCES): Add many_sections_check.h. (many_sections_check.h): New target. (check_PROGRAMS): Add many_sections_r_test. (many_sections_r_test_SOURCES): Define. (many_sections_r_test_DEPENDENCIES): Define. (many_sections_r_test_LDFLAGS): Define. (many_sections_r_test_LDADD): Define. (many_sections_r_test.o): New target. * testsuite/Makefile.in: Rebuild. 2008-04-17 Cary Coutant * errors.cc (Errors::info): New function. (gold_info): New function. * errors.h (Errors::info): New function. * gold.h (gold_info): New function. * object.cc (Input_objects::add_object): Print trace output. * options.cc (options::parse_set): New function. (General_options::parse_wrap): Deleted. (General_options::General_options): Deleted initializer. * options.h (options::String_set): New typedef. (options::parse_set): New function. (DEFINE_set): New macro. (General_options::wrap): Changed to use DEFINE_set. Changed callers of any_wrap_symbols and is_wrap_symbol. (General_options::trace, General_options::trace_symbol): New options. (General_options::any_wrap_symbols, General_options::is_wrap_symbol) (General_options::wrap_symbols_): Deleted. * symtab.cc (Symbol_table::add_from_object): Print trace output. 2008-04-17 David S. Miller * options.cc (General_options::parse_V): New function. * options.h: Add entries for -V and -Qy. 2008-04-17 Ian Lance Taylor * common.cc (Symbol_table::allocate_commons): Remove options parameter. Change caller. (Symbol_table::do_allocate_commons): Remove options parameter. Change caller. Just call do_allocate_commons_list twice. (Symbol_table::do_allocate_commons_list): New function, broken out of do_allocate_commons. * common.h (class Allocate_commons_task): Remove options_ field. Update constructor. * symtab.cc (Symbol_table::Symbol_table): Initialize tls_commons_. (Symbol_table::add_from_object): Put TLS common symbols on tls_commons_ list. (Symbol_table::sized_finalize_symbol): Handle STT_TLS symbols which are IN_OUTPUT_DATA. * symtab.h (class Symbol_table): Add tls_commons_ field. Update allocate_commons and do_allocate_commons declarations. Declare do_allocate_commons_list. * gold.cc (queue_middle_tasks): Update creation of Allocate_commons_task to not pass options. * testsuite/Makefile.am (INCLUDES): Add -I.. . (TLS_TEST_C_FLAGS): New variable. (tls_test_c_pic.o): New target. (tls_test_shared.so): Link in tls_test_c_pic.o. (tls_test_c_pic_ie.o): New target. (tls_test_ie_shared.so): Link in tls_test_c_pic_ie.o. (tls_test_DEPENDENCIES, tls_test_LDADD): Add tls_test_c.o. (tls_test_c.o): New target. (tls_pic_test_DEPENDENCIES): Add tls_test_c_pic.o. (tls_pic_test_LDADD): Likewise. (tls_shared_gd_to_ie_test_DEPENDENCIES): Add tls_test_c_pic.o. (tls_shared_gd_to_ie_test_LDADD): Likewise. (tls_test_c_gnu2.o): New target. (tls_shared_gnu2_gd_to_ie_test_DEPENDENCIES): Add tls_test_c_gnu2.o. (tls_shared_gnu2_gd_to_ie_test_LDADD): Likewise. (tls_test_gnu2_shared.so): Link in tls_test_c_gnu2.o. (tls_test_shared_nonpic.so): Link in tls_test_c.o. * testsuite/tls_test.cc: Include "config.h". (t_last): Call t11_last. * testsuite/tls_test.h (t11, t11_last): Declare. * testsuite/tls_test_c.c: New file. * testsuite/tls_test_main.cc (thread_routine): Call t11. * configure.ac: Check for OpenMP support. * configure, config.in, Makefile.in: Rebuild. * testsuite/Makefile.in: Rebuild. 2008-04-16 Cary Coutant * i386.cc (Target_i386::define_tls_base_symbol): New function. (Target_i386::tls_base_symbol_defined_): New field. (Target_i386::Scan::local): Define _TLS_MODULE_BASE_ symbol. (Target_i386::Scan::global): Likewise. * symtab.cc (sized_finalize_symbol): Add check for TLS symbol. * x86_64.cc (Target_x86_64::define_tls_base_symbol): New function. (Target_x86_64::tls_base_symbol_defined_): New field. (Target_x86_64::Scan::local): Define _TLS_MODULE_BASE_ symbol. (Target_x86_64::Scan::global): Likewise. 2008-04-16 Cary Coutant * symtab.h (Symbol::is_strong_undefined): Removed unused function. (Symbol::needs_plt_entry): Allow weak undefined symbols. (Symbol::needs_dynamic_reloc): Allow weak undefined symbols when building shared libraries. * testsuite/Makefile.am (weak_undef_nonpic_test): New target. (weak_undef_file1_nonpic.o, weak_undef_file2_nonpic.o) (weak_undef_lib_nonpic.so, alt/weak_undef_lib_nonpic.so): New targets. * testsuite/Makefile.in: Rebuild. * testsuite/weak_undef.h: New file. * testsuite/weak_undef_file1.cc: Add extra test cases. * testsuite/weak_undef_file2.cc: Likewise. * testsuite/weak_undef_test.cc: Likewise. 2008-04-16 David S. Miller * sparc.cc (Target_sparc::Scan): Change from struct to class. Add issued_non_pic_error_ field. Declare check_non_pic. (Target_sparc::Scan::check_non_pic): New function. (Target_sparc::Scan::local): Call check_non_pic as appropriate. (Target_sparc::Scan::global): Likewise. * configure.ac (FN_PTRS_IN_SO_WITHOUT_PIC): Add sparc64. * configure: Rebuild. * options.h (DEFINE_enable): New macro. (new_dtags): New enable option. (initfirst, interpose, loadfltr, nodefaultlib, nodelete, nodlopen, nodump): New -z options. * layout.cc (Layout:finish_dynamic_section): If new dtags enabled, emit DT_RUNPATH. Also, emit a DT_FLAGS_1 containing any specified -z flags. 2008-04-16 Ian Lance Taylor * copy-relocs.cc: New file. * copy-relocs.h: New file. * reloc.cc: Remove Copy_relocs code. * reloc.h: Likewise. * reloc-types.h (struct Reloc_types) [both versions]: Add get_reloc_addend_noerror. * output.h (class Output_data_reloc): Add variants of add_global which take an addend which must be zero. * i386.cc: Include "copy-relocs.h". (class Target_i386): Change type of copy_relocs_ to variable, update initializer. (Target_i386::copy_reloc): Rewrite to pass to Copy_relocs class. Change all callers. (Target_i386::do_finalize_sections): Change handling of copy_relocs_. * sparc.cc: Include "copy-relocs.h". (class Target_sparc): Change type of copy_relocs_ to variable, update initializer. (Target_sparc::copy_reloc): Rewrite to pass to Copy_relocs class. Change all callers. (Target_sparc::do_finalize_sections): Change handling of copy_relocs_. * x86_64.cc: Include "copy-relocs.h". (class Target_x86_64): Change type of copy_relocs_ to variable, update initializer. (Target_x86_64::copy_reloc): Rewrite to pass to Copy_relocs class. Change all callers. (Target_x86_64::do_finalize_sections): Change handling of copy_relocs_. * Makefile.am (CCFILES): Add copy-relocs.cc. (HFILES): Add copy-relocs.h. * Makefile.in, aclocal.m4, testsuite/Makefile.in: Rebuild. * testsuite/script_test_4.sh: Permit leading zeroes. 2008-04-15 Ian Lance Taylor * script-sections.cc (Script_sections::create_segments): Use header_size_adjustment even when there is enough room for the headers. * testsuite/script_test_4.sh: New file. * testsuite/script_test_4.t: New file. * testsuite/Makefile.am (check_SCRIPTS): Add script_test_4.sh. (check_DATA): Add script_test_4.stdout. (MOSTLYCLEANFILES): Likewise. (script_test_4): New target. (script_test_4.stdout): New target. * testsuite/Makefile.in: Rebuild. * sparc.cc: Add definitions for Output_data_plt_sparc class constants. 2008-04-14 David S. Miller * sparc.cc: New file. * Makefile.am (TARGETSOURCES): Add sparc.cc (ALL_TARGETOBJS): Add sparc.$(OBJEXT) * configure.tgt: Document targ_extra_size and targ_extra_big_endian. Add entries for sparc-* and sparc64-*. * configure.ac: Handle targ_extra_size and targ_extra_big_endian. * Makefile.in: Rebuild. * configure: Likewise. * po/POTFILES.in: Likewise. * po/gold.pot: Likewise. 2008-04-14 Ian Lance Taylor * layout.cc (Layout::Layout): Initialize sections_are_attached_. (Layout::get_output_section): Ignore SHF_WRITE and SHF_EXECINSTR in the name/type/flags to section mapping. Don't call allocate_output_section. (Layout::choose_output_section): Change parameter from adjust_name to is_input_section. Don't permit input sections after sections are attached to segments. Don't call allocate_output_section. (Layout::layout_eh_frame): Call update_flags_for_input_section, not write_enable_output_section. (Layout::make_output_section): Don't push to unattached_section_list_ nor call attach_to_segment. Call attach_section_to_segment if sections are attached. (Layout::attach_sections_to_segments): New function. (Layout::attach_section_to_segment): New function. (Layout::attach_allocated_section_to_segment): Rename from attach_to_segment. Remove flags parameter. (Layout::allocate_output_section): Remove function. (Layout::write_enable_output_section): Remove function. * layout.h (class Layout): Update for above changes. Add new field sections_are_attached_. * output.h (Output_section::update_flags_for_input_section): New function. * output.cc (Output_section::add_input_section): Call update_flags_for_input_section. * gold.cc (queue_middle_tasks): Call attach_sections_to_segments. 2008-04-11 Cary Coutant * i386.cc (Target_i386::got_mod_index_entry): Restore code previously thought unnecessary. * x86_64.cc (Target_x86_64::got_mod_index_entry): Likewise. 2008-04-11 Ian Lance Taylor * output.h (class Output_section_data): Remove inline definition of set_addralign. * output.cc (Output_section_data::set_addralign): New function. 2008-04-11 Cary Coutant Add support for TLS descriptors for i386 and x86_64. * i386.cc (Target_i386::Relocate::tls_desc_gd_to_ie): New function. (Target_i386::Relocate::tls_desc_gd_to_le): New function. (Target_i386::Got_type): Add GOT_TYPE_TLS_NOFFSET and GOT_TYPE_TLS_DESC. (Target_i386::got_mod_index_entry): Remove unnecessary code. (Target_i386::Scan::local): Implement R_386_TLS_GOTDESC and R_386_TLS_DESC_CALL relocations. Fix problem with initial-exec relocations. (Target_i386::Scan::global): Fix problem with GD-to-IE relaxation. Implement R_386_TLS_GOTDESC and R_386_TLS_DESC_CALL relocations; Fix problem with initial-exec relocations. (Target_i386::Relocate::relocate_tls): Likewise. (Target_i386::Relocate::tls_gd_to_ie): Fix problem with GD-to-IE relaxation. * output.cc (Output_data_dynamic::Dynamic_entry::write): Add support for section-plus-offset dynamic table entries. * output.h (Output_data_dynamic::add_section_plus_offset): New function. (Output_data_dynamic::Dynamic_entry): Add support for section-plus-offset dynamic table entries. (Output_data_dynamic::Classification): Likewise. (Output_data_dynamic::classification_): Renamed offset_. * x86_64.cc (Target_x86_64::Relocate::tls_desc_gd_to_ie): New function. (Target_x86_64::Relocate::tls_desc_gd_to_le): New function. (Target_x86_64::make_plt_section): New function. (Target_x86_64::reserve_tlsdesc_entries): New function. (Output_data_plt_x86_64::Output_data_plt_x86_64): Add new parameter. (Output_data_plt_x86_64::reserve_tlsdesc_entry): New function. (Output_data_plt_x86_64::has_tlsdesc_entry): New function. (Output_data_plt_x86_64::get_tlsdesc_got_offset): New function. (Output_data_plt_x86_64::get_tlsdesc_plt_offset): New function. (Output_data_plt_x86_64::tlsdesc_plt_entry): New field. (Output_data_plt_x86_64::set_final_data_size): Move out of line; add extra PLT entry for TLS descriptors. (Output_data_plt_x86_64::got_): New field. (Output_data_plt_x86_64::tlsdesc_got_offset_): New field. (Output_data_plt_x86_64::Output_data_plt_x86_64): Initialize new fields. (Output_data_plt_x86_64::do_write): Write extra PLT entry for TLS descriptors. (Target_x86_64::make_plt_entry): Factor out make_plt_section. (Target_x86_64::got_mod_index_entry): Remove unnecessary code. (Target_x86_64::Scan::local): Implement R_386_TLS_GOTDESC and R_386_TLS_DESC_CALL relocations. (Target_x86_64::Scan::global): Likewise. (Target_x86_64::do_finalize_sections): Add dynamic table entries for TLS descriptors. (Relocate::relocate_tls): Fix problem with GD-to-IE relaxation. Implement R_386_TLS_GOTDESC and R_386_TLS_DESC_CALL relocations. (Target_x86_64::Relocate::tls_gd_to_ie): Fix problem with GD-to-IE relaxation. * configure.ac: Export new conditional variables TLS_GNU2_DIALECT and TLS_DESCRIPTORS. * Makefile.in: Rebuild. * configure: Rebuild. * testsuite/Makefile.am (tls_shared_gd_to_ie_test): New target. (tls_test_shared2.so): New target. (tls_shared_gd_to_ie_test_SOURCES): New variable. (tls_shared_gd_to_ie_test_DEPENDENCIES): New variable. (tls_shared_gd_to_ie_test_LDFLAGS): New variable. (tls_shared_gd_to_ie_test_LDADD): New variable. (tls_shared_gnu2_gd_to_ie_test): New target. (tls_test_gnu2.o, tls_test_file2_gnu2.o, tls_test_gnu2_shared2.so): New targets. (tls_shared_gnu2_gd_to_ie_test_SOURCES): New variable. (ls_shared_gnu2_gd_to_ie_test_DEPENDENCIES): New variable. (tls_shared_gnu2_gd_to_ie_test_LDFLAGS): New variable. (tls_shared_gnu2_gd_to_ie_test_LDADD): New variable. (tls_shared_gnu2_test): New target. (tls_test_gnu2_shared.so): New target. (tls_shared_gnu2_test_SOURCES): New variable. (tls_shared_gnu2_test_DEPENDENCIES): New variable. (tls_shared_gnu2_test_LDFLAGS): New variable. (tls_shared_gnu2_test_LDADD): New variable. * testsuite/Makefile.in: Rebuild. * testsuite/Makefile. 2008-04-11 Ian Lance Taylor * testsuite/Makefile.am (justsyms_2r.o): Add dependency on justsyms.t. * testsuite/Makefile.in: Rebuild. * testsuite/script_test_2a.cc (script_test_string_a): Make 8 bytes long. * testsuite/script_test_2.cc (main): Adjust test. 2008-04-11 David S. Miller Ian Lance Taylor * options.h (General_options): Add entries for '-Y' and '-relax'. * options.cc (General_options:finalize): If -Y was used, add those entries to the library path instead of the default "/lib" and "/usr/lib". 2008-04-11 David S. Miller * testsuite/justsyms.t: Start at 0x100. * testsuite/justsyms_1.cc: Adjust justsyms_string assertion. * testsuite/script_test_2b.cc (script_test_string_b): Make 8 bytes long. * testsuite/script_test_2.cc: Adjust string and section length checks. 2008-04-09 Ian Lance Taylor PR gold/5996 * script-sections.cc (Sections_element::allocate_to_segment): Add orphan parameter. (Output_section_definition::allocate_to_segment): Likewise. (Orphan_output_section::allocate_to_segment): Likewise. (Script_sections::attach_sections_using_phdrs_clause): Don't propagate non-PT_LOAD segments to orphan sections. * testsuite/Makefile.am (script_test_3.stdout): Generate using readelf rather than objdump. * testsuite/script_test_3.sh: Adjust accordingly. Test that .interp section and PT_INTERP segment are the same size. * testsuite/Makefile.in: Rebuild. * symtab.cc (Symbol_table::add_from_dynobj): Only look for weak aliases for symbols defined in the same object. * testsuite/Makefile.am (check_PROGRAMS): Add weak_alias_test. (weak_alias_test_SOURCES): New variable. (weak_alias_test_DEPENDENCIES): New variable. (weak_alias_test_LDFLAGS): New variable. (weak_alias_test_LDADD): New variable. (weak_alias_test_1_pic.o, weak_alias_test_1.so): New targets. (weak_alias_test_2_pic.o, weak_alias_test_2.so): New targets. (weak_alias_test_3.o): New target. (weak_alias_test_4_pic.o, weak_alias_test_4.so): New targets. * testsuite/weak_alias_test_main.cc: New file. * testsuite/weak_alias_test_1.cc: New file. * testsuite/weak_alias_test_2.cc: New file. * testsuite/weak_alias_test_3.cc: New file. 2008-04-08 Ian Lance Taylor * options.h (class General_options): Add --noinhibit-exec option. * main.cc (main): Check --noinhibit-exec. * options.h (class General_options): Define --wrap as a special option. Add wrap_symbols_ field. (General_options::any_wrap_symbols): New function. (General_options::is_wrap_symbol): New function. * options.cc (General_options::parse_wrap): New function. (General_options::General_options): Initialize wrap_symbols_. * symtab.cc (Symbol_table::wrap_symbol): New function. (Symbol_table::add_from_object): Handle --wrap. * symtab.h (class Symbol_table): Declare wrap_symbol. * target.h (Target::wrap_char): New function. (Target::Target_info): Add wrap_char field. * i386.cc (Target_i386::i386_info): Initialize wrap_char. * x86_64.cc (Target_x86_64::x86_64_info): Likewise. * testsuite/testfile.cc (Target_test::test_target_info): Likewise. * errors.cc (Errors::undefined_symbol): Mention symbol version if there is one. * layout.h (class Layout): Add added_eh_frame_data_ field. * layout.cc (Layout::Layout): Initialize new field. (Layout::layout_eh_frame): Don't add eh_frame_data_ to .eh_frame output section until we find a section we merged successfully. * object.cc (Sized_relobj::check_eh_frame_flags): Don't require that the size be non-zero. * merge.cc (Object_merge_map::get_output_offset): Remove inline qualifier. 2008-04-08 Craig Silverstein * configure.ac: Export new conditional variable HAVE_ZLIB. * testsuite/Makefile.am (flagstest_o_specialfile): Condition on HAVE_ZLIB. (flagstest_o_specialfile_and_compress_debug_sections): Likewise. * configure, Makefile.in, testsuite/Makefile.in: Rebuild. 2008-04-07 Ian Lance Taylor * version.cc (version_string): Set to "1.5". * x86_64.cc (Target_x86_64::Scan): Change from struct to class. Add issued_non_pic_error_ field. Declare check_non_pic. (Target_x86_64::Scan::check_non_pic): New function. (Target_x86_64::Scan::local): Call check_non_pic as appropriate. (Target_x86_64::Scan::global): Likewise. * output.cc (Output_reloc::local_section_offset): Add addend parameter. Change caller. Handle merge sections. (Output_reloc::symbol_value): Change parameter type from Address to Addend. Don't add in the result of local_section_offset, pass down the addend and use the returned value. * output.h (class Output_reloc): Add Addend typedef. Update declarations of local_section_offset and symbol_value. * testsuite/two_file_test_1.cc (t18): New function. * testsuite/two_file_test_2.cc (f18): New function. * testsuite/two_file_test_main.cc (main): Call t18. * testsuite/two_file_test.h (t18, f18): Declare. * configure.ac: Don't test for objdump, c++filt, or readelf. * testsuite/Makefile.am: Remove READELF and OBJDUMP_AND_CPPFILT conditionals. (TEST_READELF): New variable. (TEST_OBJDUMP, TEST_CXXFILT, TEST_STRIP): New variables. (check_PROGRAMS): Add two_file_strip_test. (two_file_strip_test): New target. (check_PROGRAMS): Add two_file_same_shared_strip_test. (two_file_same_shared_strip_test_SOURCES): New variable. (two_file_same_shared_strip_test_DEPENDENCIES): New variable. (two_file_same_shared_strip_test_LDFLAGS): New variable. (two_file_same_shared_strip_test_LDADD): New variable. (two_file_shared_strip.so): New target. (ver_test_2.syms, ver_test_4.syms): Use TEST_READELF. (ver_test_5.syms, ver_test_7.syms): Likewise. (ver_matching_test.stdout): Use TEST_OBJDUMP and TEST_CXXFILT. (strip_test_3.stdout): Use TEST_OBJDUMP. * configure, Makefile.in, testsuite/Makefile.in: Rebuild. 2008-04-04 Cary Coutant * symtab.h (Symbol::is_weak_undefined): New function. (Symbol::is_strong_undefined): New function. (Symbol::is_absolute): New function. (Symbol::needs_plt_entry): Exclude weak undefined symbols. (Symbol::needs_dynamic_reloc): Exclude weak undefined and absolute symbols. * testsuite/Makefile.am (check_PROGRAMS): Add weak_undef_test. (weak_undef_test): New target. * testsuite/Makefile.in: Rebuild. * testsuite/weak_undef_file1.cc: New file. * testsuite/weak_undef_file2.cc: New file. * testsuite/weak_undef_test.cc: New file. 2008-04-03 Craig Silverstein * compressed_output.h (class Output_compressed_section): Use unsigned buffer. * compressed_output.cc (zlib_compress): Use unsigned buffers, add zlib header. (zlib_compressed_suffix): Removed. (Output_compressed_section::set_final_data_size): Use unsigned buffers. * testsuite/Makefile.am (flagstest_compress_debug_sections): Fix linker invocation. (flagstest_o_specialfile_and_compress_debug_sections): Likewise. * testsuite/Makefile.in: Regenerated. 2008-04-02 David S. Miller * dwarf_reader.cc (Sized_dwarf_line_info::read_header_prolog, Sized_dwarf_line_info::process_one_opcode): Use Swap_unaligned. 2008-04-02 Craig Silverstein * TODO: New file. 2008-04-02 Ian Lance Taylor * fileread.cc (File_read::find_view): Add byteshift and vshifted parameters. Update for new key type to views_. Change all callers. (File_read::read): Adjust for byteshift in returned view. (File_read::add_view): New function, broken out of find_and_make_view. (File_read::make_view): New function, broken out of find_and_make_view. (File_read::find_or_make_view): Add offset and aligned parameters. Rewrite accordingly. Change all callers. (File_read::get_view): Add offset and aligned parameters. Adjust for byteshift in return value. (File_read::get_lasting_view): Likewise. * fileread.h (class File_read): Update declarations. (class File_read::View): Add byteshift_ field. Add byteshift to constructor. Add byteshift method. * archive.h (Archive::clear_uncached_views): New function. (Archive::get_view): Add aligned parameter. Change all callers. * object.h (Object::get_view): Add aligned parameter. Change all callers. (Object::get_lasting_view): Likewise. * fileread.cc (File_read::release): Don't call clear_views if there are multiple objects. * fileread.h (File_read::clear_uncached_views): New function. * archive.cc (Add_archive_symbols::run): Call clear_uncached_views on the archive. 2008-03-31 Cary Coutant Add thin archive support. * archive.cc (Archive::armagt): New const. (Archive::setup): Remove task parameter and calls to unlock. (Archive::unlock_nested_archives): New function. (Archive::read_header): Add nested_off parameter. Change all callers. (Archive::interpret_header): Likewise. (Archive::include_all_members): Change to handle thin archives. (Archive::include_member): Likewise. * archive.h (Archive::Archive): Add new parameters and initializers. (Archive::armagt): New const. (Archive::setup): Remove task parameter. (Archive::unlock_nested_archives): New function. (Archive::read_header): Add nested_off parameter. (Archive::interpret_header): Likewise. (Archive::Nested_archive_table): New typedef. (Archive::is_thin_archive_): New field. (Archive::nested_archives_): New field. (Archive::options_): New field. (Archive::dirpath_): New field. (Archive::task_): New field. * readsyms.cc (Read_symbols::do_read_symbols): Add check for thin archives. Pass additional parameters to Archive::Archive. Unlock the archive file after calling Archive::setup. 2008-03-29 Ian Lance Taylor * symtab.cc (Symbol_table::do_define_as_constant): Don't force a version symbol to be local. * testsuite/ver_test_4.sh: New file. * testsuite/Makefile.am (check_SCRIPTS): Add ver_test_4.sh. (check_DATA): Add ver_test_4.syms. (ver_test_4.syms): New target. * testsuite/Makefile.in: Rebuild. * output.cc (Output_section::Input_section_sort_entry::has_priority): New function. (Output_section::Input_section_sort_entry::match_file_name): New function. (Output_section::Input_section_sort_entry::match_section_name): Remove. (Output_section::Input_section_sort_entry::match_section_name_prefix): Remove. (Output_section::Input_section_sort_entry::match_section_file): Remove. (Output_section::Input_section_sort_compare::operator()): Rewrite using new Input_section_sort_entry functions. Sort crtbegin and crtend first. Sort sections with no priority before sections with a priority. * testsuite/initpri1.c (d3): Check j != 4. (cd5): New constructor/destructor function. (main): Check j != 2. * symtab.cc (Symbol_table::add_from_object): If we don't use the new symbol when resolving, don't call set_is_default. * testsuite/ver_test_7.cc: New file. * testsuite/ver_test_7.sh: New file. * testsuite/Makefile.am (ver_test_7.so): New target. (ver_test_7.o): New target. (check_SCRIPTS): Add ver_test_7.sh. (check_DATA): Add ver_test_7.syms. (ver_test_7.syms): New target. 2008-03-28 Ian Lance Taylor * layout.cc (Layout::layout): If we see an input section with a name that needs sorting, set the must_sort flag for the output section. (Layout::make_output_section): If the name of the output section indicates that it might require sorting, set the may_sort flag. * output.h (Output_section::may_sort_attached_input_sections): New function. (Output_section::set_may_sort_attached_input_sections): New function. (Output_section::must_sort_attached_input_sections): New function. (Output_section::set_must_sort_attached_input_sections): New function. (class Output_section): Declare Input_section_sort_entry. Define Input_section_sort_compare. Declare sort_attached_input_sections. Add new fields: may_sort_attached_input_sections_, must_sort_attached_input_sections_, attached_input_sections_are_sorted_. * output.cc (Output_section::Output_section): Initialize new fields. (Output_section::add_input_section): Add an entry to input_sections_ if may_sort or must_sort are true. (Output_section::set_final_data_size): Call sort_attached_input_sections if necessary. (Output_section::Input_section_sort_entry): Define new class. (Output_section::Input_section_sort_compare::operator()): New function. (Output_section::sort_attached_input_sections): New function. * configure.ac: Check whether the compiler supports constructor priorities. Define a CONSTRUCTOR_PRIORITY automake conditional. * testsuite/initpri1.c: New file. * testsuite/Makefile.am (check_PROGRAMS): Add initpri1 if CONSTRUCTOR_PRIORITY. (initpri1_SOURCES, initpri1_DEPENDENCIES): New variables. (initpri1_LDFLAGS): New variable. * configure, Makefile.in, testsuite/Makefile.in: Rebuild. 2008-03-27 Ian Lance Taylor * common.cc (Sort_commons::operator): Correct sorting algorithm. * testsuite/common_test_1.c: New file. * testsuite/Makefile.am (check_PROGRAMS): Add common_test_1. (common_test_1_SOURCES): New variable. (common_test_1_DEPENDENCIES): New variable. (common_test_1_LDFLAGS): New variable. * symtab.cc (Symbol_table::add_from_object): Handle saw_undefined_ and commons_ correctly when NAME/VERSION does not override NAME/NULL. * testsuite/ver_test_6.c: New file. * testsuite/Makefile.am (check_PROGRAMS): Add ver_test_6 (ver_test_6_SOURCES, ver_test_6_DEPENDENCIES): New variables. (ver_test_6_LDFLAGS, ver_test_6_LDADD): New variables. 2008-03-26 Ian Lance Taylor * symtab.cc (Symbol_table::add_from_relobj): Don't set the version of an undefined symbol from a version script. * testsuite/Makefile.am (ver_test_5.so): New target. (ver_test_5.o): New target. (check_SCRIPTS): Add ver_test_5.sh. (check_DATA): Add ver_test_5.syms. (ver_test_5.syms): New target. * testsuite/ver_test_5.cc: New file. * testsuite/ver_test_5.script: New file. * testsuite/ver_test_5.sh: New file. * Makefile.in, testsuite/Makefile.in: Rebuild. PR gold/5986 Fix problems building gold with gcc 4.3.0. * gold.h (TEMPLATE_ATTRIBUTE_PRINTF_4): Define. (gold_error_at_location, gold_warning_at_location): Use it. * configure.ac: Check whether we can compile and use a template function with a printf attribute. * x86_64.cc (Target_x86_64::do_code_fill): Swap out a 32-bit value when jumping over bytes. * object.cc: Instantiate Object::read_section_data. * debug.h: Include * dwarf_reader.cc: Include * main.cc: Include . * options.cc: Include . * output.cc: Include . * script.cc: Include . * script.h: Include . * symtab.cc: Include and . * target-select.cc: Include . * version.cc: Include . * testsuite/testmain.cc: Include . * configure, config.in: Rebuild. 2008-03-25 Ian Lance Taylor * options.cc: Include "../bfd/bfdver.h". (options::help): Print bug reporting address. * version.cc (print_version): Adjust output for current value of BFD_VERSION_STRING. * NEWS: New file. * options.cc (options::help): Print list of supported targets. * target-select.h: Include . (class Target_selector): Make machine_, size_, and is_big_endian_ fields const. Add bfd_name_ and instantiated_target_ fields. (Target_selector::Target_selector): Add bfd_name parameter. (Target_selector::recognize): Make non-virtual, call do_recognize. (Target_selector::recognize_by_name): Make non-virtual, call do_recognize_by_name. (Target_selector::supported_names): New function. (Target_selector::bfd_name): New function. (Target_selector::do_instantiate_target): New pure virtual function. (Target_selector::do_recognize): New virtual function. (Target_selector::do_recognize_by_name): New virtual function. (Target_selector::instantiate_target): New private function. (supported_target_names): Declare. * target-select.cc (Target_selector::Target_selector): Update for new parameter and fields. (select_target_by_name): Check that the name matches before calling recognize_by_name. (supported_target_names): New function. * i386.cc (class Target_selector_i386): Update Target_selector constructor call. Remove recognize and recognize_by_name. Add do_instantiate_target. * x86_64.cc (class Target_selector_x86_64): Likewise. * testsuite/testfile.cc (class Target_selector_test): Update for changes to Target_selector. * README: Rewrite, with some notes on unsupported features. 2008-03-24 Cary Coutant * i386.cc (Target_i386::Got_type): New enum declaration. (Target_i386::Scan::local): Updated callers of Output_data_got member functions. (Target_i386::Scan::global): Likewise. (Target_i386::Relocate::relocate): Likewise. (Target_i386::Relocate::relocate_tls): Likewise. * object.h (Got_offset_list): New class. (Sized_relobj::local_has_got_offset): Added got_type parameter. (Sized_relobj::local_got_offset): Likewise. (Sized_relobj::set_local_got_offset): Likewise. (Sized_relobj::local_has_tls_got_offset): Removed. (Sized_relobj::local_tls_got_offset): Removed. (Sized_relobj::set_local_tls_got_offset): Removed. (Sized_relobj::Local_got_offsets): Changed to store a list of offsets. * output.cc (Output_data_got::add_global): Added got_type parameter. (Output_data_got::add_global_with_rel): Likewise. (Output_data_got::add_global_with_rela): Likewise. (Output_data_got::add_global_pair_with_rel): New function. (Output_data_got::add_global_pair_with_rela): New function. (Output_data_got::add_local): Added got_type parameter. (Output_data_got::add_local_with_rel): Likewise. (Output_data_got::add_local_with_rela): Likewise. (Output_data_got::add_local_pair_with_rel): New function. (Output_data_got::add_local_pair_with_rela): New function. (Output_data_got::add_global_tls): Removed. (Output_data_got::add_global_tls_with_rel): Removed. (Output_data_got::add_global_tls_with_rela): Removed. (Output_data_got::add_local_tls): Removed. (Output_data_got::add_local_tls_with_rel): Removed. (Output_data_got::add_local_tls_with_rela): Removed. * output.h (Output_data_got::add_global): Added got_type parameter. (Output_data_got::add_global_with_rel): Likewise. (Output_data_got::add_global_with_rela): Likewise. (Output_data_got::add_global_pair_with_rel): New function. (Output_data_got::add_global_pair_with_rela): New function. (Output_data_got::add_local): Added got_type parameter. (Output_data_got::add_local_with_rel): Likewise. (Output_data_got::add_local_with_rela): Likewise. (Output_data_got::add_local_pair_with_rel): New function. (Output_data_got::add_local_pair_with_rela): New function. (Output_data_got::add_global_tls): Removed. (Output_data_got::add_global_tls_with_rel): Removed. (Output_data_got::add_global_tls_with_rela): Removed. (Output_data_got::add_local_tls): Removed. (Output_data_got::add_local_tls_with_rel): Removed. (Output_data_got::add_local_tls_with_rela): Removed. * resolve.cc (Symbol::override_base_with_special): Removed reference to has_got_offset_ field. * symtab.cc (Symbol::init_fields): Replaced initialization of got_offset_ with got_offsets_. Removed initialization of has_got_offset_ * symtab.h (Symbol::has_got_offset): Aded got_type parameter. (Symbol::got_offset): Likewise. (Symbol::set_got_offset): Likewise. (Symbol::has_tls_got_offset): Removed. (Symbol::tls_got_offset): Removed. (Symbol::set_tls_got_offset): Removed. (Symbol::got_offset_): Removed. (Symbol::tls_mod_got_offset_): Removed. (Symbol::tls_pair_got_offset_): Removed. (Symbol::got_offsets_): New field. (Symbol::has_got_offset): Removed. (Symbol::has_tls_mod_got_offset): Removed. (Symbol::has_tls_pair_got_offset): Removed. * x86_64.cc (Target_x86_64::Got_type): New enum declaration. (Target_x86_64::Scan::local): Updated callers of Output_data_got member functions. (Target_x86_64::Scan::global): Likewise. (Target_x86_64::Relocate::relocate): Likewise. (Target_x86_64::Relocate::relocate_tls): Likewise. 2008-03-25 Ben Elliston * yyscript.y: Fix spelling error in comment. 2008-03-24 Ian Lance Taylor * options.h (class General_options): Define build_id option. * layout.h (class Layout): Declare write_build_id, create_note, create_build_id. Add build_id_note_ member. * layout.cc: Include , , , "libiberty.h", "md5.h", "sha1.h". (Layout::Layout): Initialize eh_frame_data_, eh_frame_hdr_section_, and build_id_note_. (Layout::finalize): Call create_build_id. (Layout::create_note): New function, broken out of Layout::create_gold_note. (Layout::create_gold_note): Call create_note. (Layout::create_build_id): New function. (Layout::write_build_id): New function. (Close_task_runner::run): Call write_build_id. * x86_64.cc: Correct license to GPLv3. 2008-03-23 Ian Lance Taylor * options.cc: Include "demangle.h". (parse_optional_string): New function. (parse_long_option): Handle takes_optional_argument. (parse_short_option): Update dash_z initializer. Handle takes_optional_argument. (General_options::General_options): Initialize do_demangle_. (General_options::finalize): Set do_demangle_. Handle demangling style. * options.h (parse_optional_string): Declare. (struct One_option): Add optional_arg field. Update constructor. Update call constructor calls. Add takes_optional_argument function. (DEFINE_var): Add optional_arg__ parameter. Change all callers. (DEFINE_optional_string): Define. (General_options::demangle): Change from DEFINE_bool to DEFINE_optional_string. (General_options::no_demangle): New function. (General_options::do_demangle): New function. (General_options::set_do_demangle): New function. (General_options::execstack_status_): Move definition to end of class definition. (General_options::static_): Likewise. (General_options::do_demangle_): New field. * object.cc (big_endian>::get_symbol_location_info): Call Options::do_demangle, not Options::demangle. * symtab.cc (demangle): Likewise. 2008-03-22 Ian Lance Taylor * gold.h: Include and * options.h: Include . 2008-03-21 Ian Lance Taylor * Added source code to GNU binutils.