/* GNU/Linux/ARM specific low level interface, for the remote server for GDB. Copyright (C) 1995-2020 Free Software Foundation, Inc. This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #include "server.h" #include "linux-low.h" #include "arch/arm.h" #include "arch/arm-linux.h" #include "arch/arm-get-next-pcs.h" #include "linux-aarch32-low.h" #include "linux-aarch32-tdesc.h" #include "linux-arm-tdesc.h" #include /* Don't include elf.h if linux/elf.h got included by gdb_proc_service.h. On Bionic elf.h and linux/elf.h have conflicting definitions. */ #ifndef ELFMAG0 #include #endif #include "nat/gdb_ptrace.h" #include #include #ifndef PTRACE_GET_THREAD_AREA #define PTRACE_GET_THREAD_AREA 22 #endif #ifndef PTRACE_GETWMMXREGS # define PTRACE_GETWMMXREGS 18 # define PTRACE_SETWMMXREGS 19 #endif #ifndef PTRACE_GETVFPREGS # define PTRACE_GETVFPREGS 27 # define PTRACE_SETVFPREGS 28 #endif #ifndef PTRACE_GETHBPREGS #define PTRACE_GETHBPREGS 29 #define PTRACE_SETHBPREGS 30 #endif /* Linux target op definitions for the ARM architecture. */ class arm_target : public linux_process_target { public: const regs_info *get_regs_info () override; protected: void low_arch_setup () override; }; /* The singleton target ops object. */ static arm_target the_arm_target; /* Information describing the hardware breakpoint capabilities. */ static struct { unsigned char arch; unsigned char max_wp_length; unsigned char wp_count; unsigned char bp_count; } arm_linux_hwbp_cap; /* Enum describing the different types of ARM hardware break-/watch-points. */ typedef enum { arm_hwbp_break = 0, arm_hwbp_load = 1, arm_hwbp_store = 2, arm_hwbp_access = 3 } arm_hwbp_type; /* Type describing an ARM Hardware Breakpoint Control register value. */ typedef unsigned int arm_hwbp_control_t; /* Structure used to keep track of hardware break-/watch-points. */ struct arm_linux_hw_breakpoint { /* Address to break on, or being watched. */ unsigned int address; /* Control register for break-/watch- point. */ arm_hwbp_control_t control; }; /* Since we cannot dynamically allocate subfields of arch_process_info, assume a maximum number of supported break-/watchpoints. */ #define MAX_BPTS 32 #define MAX_WPTS 32 /* Per-process arch-specific data we want to keep. */ struct arch_process_info { /* Hardware breakpoints for this process. */ struct arm_linux_hw_breakpoint bpts[MAX_BPTS]; /* Hardware watchpoints for this process. */ struct arm_linux_hw_breakpoint wpts[MAX_WPTS]; }; /* Per-thread arch-specific data we want to keep. */ struct arch_lwp_info { /* Non-zero if our copy differs from what's recorded in the thread. */ char bpts_changed[MAX_BPTS]; char wpts_changed[MAX_WPTS]; /* Cached stopped data address. */ CORE_ADDR stopped_data_address; }; /* These are in in current kernels. */ #define HWCAP_VFP 64 #define HWCAP_IWMMXT 512 #define HWCAP_NEON 4096 #define HWCAP_VFPv3 8192 #define HWCAP_VFPv3D16 16384 #ifdef HAVE_SYS_REG_H #include #endif #define arm_num_regs 26 static int arm_regmap[] = { 0, 4, 8, 12, 16, 20, 24, 28, 32, 36, 40, 44, 48, 52, 56, 60, -1, -1, -1, -1, -1, -1, -1, -1, -1, 64 }; /* Forward declarations needed for get_next_pcs ops. */ static ULONGEST get_next_pcs_read_memory_unsigned_integer (CORE_ADDR memaddr, int len, int byte_order); static CORE_ADDR get_next_pcs_addr_bits_remove (struct arm_get_next_pcs *self, CORE_ADDR val); static CORE_ADDR get_next_pcs_syscall_next_pc (struct arm_get_next_pcs *self); static int get_next_pcs_is_thumb (struct arm_get_next_pcs *self); /* get_next_pcs operations. */ static struct arm_get_next_pcs_ops get_next_pcs_ops = { get_next_pcs_read_memory_unsigned_integer, get_next_pcs_syscall_next_pc, get_next_pcs_addr_bits_remove, get_next_pcs_is_thumb, arm_linux_get_next_pcs_fixup, }; static int arm_cannot_store_register (int regno) { return (regno >= arm_num_regs); } static int arm_cannot_fetch_register (int regno) { return (regno >= arm_num_regs); } static void arm_fill_wmmxregset (struct regcache *regcache, void *buf) { if (arm_linux_get_tdesc_fp_type (regcache->tdesc) != ARM_FP_TYPE_IWMMXT) return; for (int i = 0; i < 16; i++) collect_register (regcache, arm_num_regs + i, (char *) buf + i * 8); /* We only have access to wcssf, wcasf, and wcgr0-wcgr3. */ for (int i = 0; i < 6; i++) collect_register (regcache, arm_num_regs + i + 16, (char *) buf + 16 * 8 + i * 4); } static void arm_store_wmmxregset (struct regcache *regcache, const void *buf) { if (arm_linux_get_tdesc_fp_type (regcache->tdesc) != ARM_FP_TYPE_IWMMXT) return; for (int i = 0; i < 16; i++) supply_register (regcache, arm_num_regs + i, (char *) buf + i * 8); /* We only have access to wcssf, wcasf, and wcgr0-wcgr3. */ for (int i = 0; i < 6; i++) supply_register (regcache, arm_num_regs + i + 16, (char *) buf + 16 * 8 + i * 4); } static void arm_fill_vfpregset (struct regcache *regcache, void *buf) { int num; if (is_aarch32_linux_description (regcache->tdesc)) num = 32; else { arm_fp_type fp_type = arm_linux_get_tdesc_fp_type (regcache->tdesc); if (fp_type == ARM_FP_TYPE_VFPV3) num = 32; else if (fp_type == ARM_FP_TYPE_VFPV2) num = 16; else return; } arm_fill_vfpregset_num (regcache, buf, num); } /* Wrapper of UNMAKE_THUMB_ADDR for get_next_pcs. */ static CORE_ADDR get_next_pcs_addr_bits_remove (struct arm_get_next_pcs *self, CORE_ADDR val) { return UNMAKE_THUMB_ADDR (val); } static void arm_store_vfpregset (struct regcache *regcache, const void *buf) { int num; if (is_aarch32_linux_description (regcache->tdesc)) num = 32; else { arm_fp_type fp_type = arm_linux_get_tdesc_fp_type (regcache->tdesc); if (fp_type == ARM_FP_TYPE_VFPV3) num = 32; else if (fp_type == ARM_FP_TYPE_VFPV2) num = 16; else return; } arm_store_vfpregset_num (regcache, buf, num); } /* Wrapper of arm_is_thumb_mode for get_next_pcs. */ static int get_next_pcs_is_thumb (struct arm_get_next_pcs *self) { return arm_is_thumb_mode (); } /* Read memory from the inferior. BYTE_ORDER is ignored and there to keep compatiblity with GDB's read_memory_unsigned_integer. */ static ULONGEST get_next_pcs_read_memory_unsigned_integer (CORE_ADDR memaddr, int len, int byte_order) { ULONGEST res; res = 0; target_read_memory (memaddr, (unsigned char *) &res, len); return res; } /* Fetch the thread-local storage pointer for libthread_db. */ ps_err_e ps_get_thread_area (struct ps_prochandle *ph, lwpid_t lwpid, int idx, void **base) { if (ptrace (PTRACE_GET_THREAD_AREA, lwpid, NULL, base) != 0) return PS_ERR; /* IDX is the bias from the thread pointer to the beginning of the thread descriptor. It has to be subtracted due to implementation quirks in libthread_db. */ *base = (void *) ((char *)*base - idx); return PS_OK; } /* Query Hardware Breakpoint information for the target we are attached to (using PID as ptrace argument) and set up arm_linux_hwbp_cap. */ static void arm_linux_init_hwbp_cap (int pid) { unsigned int val; if (ptrace (PTRACE_GETHBPREGS, pid, 0, &val) < 0) return; arm_linux_hwbp_cap.arch = (unsigned char)((val >> 24) & 0xff); if (arm_linux_hwbp_cap.arch == 0) return; arm_linux_hwbp_cap.max_wp_length = (unsigned char)((val >> 16) & 0xff); arm_linux_hwbp_cap.wp_count = (unsigned char)((val >> 8) & 0xff); arm_linux_hwbp_cap.bp_count = (unsigned char)(val & 0xff); if (arm_linux_hwbp_cap.wp_count > MAX_WPTS) internal_error (__FILE__, __LINE__, "Unsupported number of watchpoints"); if (arm_linux_hwbp_cap.bp_count > MAX_BPTS) internal_error (__FILE__, __LINE__, "Unsupported number of breakpoints"); } /* How many hardware breakpoints are available? */ static int arm_linux_get_hw_breakpoint_count (void) { return arm_linux_hwbp_cap.bp_count; } /* How many hardware watchpoints are available? */ static int arm_linux_get_hw_watchpoint_count (void) { return arm_linux_hwbp_cap.wp_count; } /* Maximum length of area watched by hardware watchpoint. */ static int arm_linux_get_hw_watchpoint_max_length (void) { return arm_linux_hwbp_cap.max_wp_length; } /* Initialize an ARM hardware break-/watch-point control register value. BYTE_ADDRESS_SELECT is the mask of bytes to trigger on; HWBP_TYPE is the type of break-/watch-point; ENABLE indicates whether the point is enabled. */ static arm_hwbp_control_t arm_hwbp_control_initialize (unsigned byte_address_select, arm_hwbp_type hwbp_type, int enable) { gdb_assert ((byte_address_select & ~0xffU) == 0); gdb_assert (hwbp_type != arm_hwbp_break || ((byte_address_select & 0xfU) != 0)); return (byte_address_select << 5) | (hwbp_type << 3) | (3 << 1) | enable; } /* Does the breakpoint control value CONTROL have the enable bit set? */ static int arm_hwbp_control_is_enabled (arm_hwbp_control_t control) { return control & 0x1; } /* Is the breakpoint control value CONTROL initialized? */ static int arm_hwbp_control_is_initialized (arm_hwbp_control_t control) { return control != 0; } /* Change a breakpoint control word so that it is in the disabled state. */ static arm_hwbp_control_t arm_hwbp_control_disable (arm_hwbp_control_t control) { return control & ~0x1; } /* Are two break-/watch-points equal? */ static int arm_linux_hw_breakpoint_equal (const struct arm_linux_hw_breakpoint *p1, const struct arm_linux_hw_breakpoint *p2) { return p1->address == p2->address && p1->control == p2->control; } /* Convert a raw breakpoint type to an enum arm_hwbp_type. */ static arm_hwbp_type raw_bkpt_type_to_arm_hwbp_type (enum raw_bkpt_type raw_type) { switch (raw_type) { case raw_bkpt_type_hw: return arm_hwbp_break; case raw_bkpt_type_write_wp: return arm_hwbp_store; case raw_bkpt_type_read_wp: return arm_hwbp_load; case raw_bkpt_type_access_wp: return arm_hwbp_access; default: gdb_assert_not_reached ("unhandled raw type"); } } /* Initialize the hardware breakpoint structure P for a breakpoint or watchpoint at ADDR to LEN. The type of watchpoint is given in TYPE. Returns -1 if TYPE is unsupported, or -2 if the particular combination of ADDR and LEN cannot be implemented. Otherwise, returns 0 if TYPE represents a breakpoint and 1 if type represents a watchpoint. */ static int arm_linux_hw_point_initialize (enum raw_bkpt_type raw_type, CORE_ADDR addr, int len, struct arm_linux_hw_breakpoint *p) { arm_hwbp_type hwbp_type; unsigned mask; hwbp_type = raw_bkpt_type_to_arm_hwbp_type (raw_type); if (hwbp_type == arm_hwbp_break) { /* For breakpoints, the length field encodes the mode. */ switch (len) { case 2: /* 16-bit Thumb mode breakpoint */ case 3: /* 32-bit Thumb mode breakpoint */ mask = 0x3; addr &= ~1; break; case 4: /* 32-bit ARM mode breakpoint */ mask = 0xf; addr &= ~3; break; default: /* Unsupported. */ return -2; } } else { CORE_ADDR max_wp_length = arm_linux_get_hw_watchpoint_max_length (); CORE_ADDR aligned_addr; /* Can not set watchpoints for zero or negative lengths. */ if (len <= 0) return -2; /* The current ptrace interface can only handle watchpoints that are a power of 2. */ if ((len & (len - 1)) != 0) return -2; /* Test that the range [ADDR, ADDR + LEN) fits into the largest address range covered by a watchpoint. */ aligned_addr = addr & ~(max_wp_length - 1); if (aligned_addr + max_wp_length < addr + len) return -2; mask = (1 << len) - 1; } p->address = (unsigned int) addr; p->control = arm_hwbp_control_initialize (mask, hwbp_type, 1); return hwbp_type != arm_hwbp_break; } /* Callback to mark a watch-/breakpoint to be updated in all threads of the current process. */ static void update_registers_callback (thread_info *thread, int watch, int i) { struct lwp_info *lwp = get_thread_lwp (thread); /* The actual update is done later just before resuming the lwp, we just mark that the registers need updating. */ if (watch) lwp->arch_private->wpts_changed[i] = 1; else lwp->arch_private->bpts_changed[i] = 1; /* If the lwp isn't stopped, force it to momentarily pause, so we can update its breakpoint registers. */ if (!lwp->stopped) linux_stop_lwp (lwp); } static int arm_supports_z_point_type (char z_type) { switch (z_type) { case Z_PACKET_SW_BP: case Z_PACKET_HW_BP: case Z_PACKET_WRITE_WP: case Z_PACKET_READ_WP: case Z_PACKET_ACCESS_WP: return 1; default: /* Leave the handling of sw breakpoints with the gdb client. */ return 0; } } /* Insert hardware break-/watchpoint. */ static int arm_insert_point (enum raw_bkpt_type type, CORE_ADDR addr, int len, struct raw_breakpoint *bp) { struct process_info *proc = current_process (); struct arm_linux_hw_breakpoint p, *pts; int watch, i, count; watch = arm_linux_hw_point_initialize (type, addr, len, &p); if (watch < 0) { /* Unsupported. */ return watch == -1 ? 1 : -1; } if (watch) { count = arm_linux_get_hw_watchpoint_count (); pts = proc->priv->arch_private->wpts; } else { count = arm_linux_get_hw_breakpoint_count (); pts = proc->priv->arch_private->bpts; } for (i = 0; i < count; i++) if (!arm_hwbp_control_is_enabled (pts[i].control)) { pts[i] = p; /* Only update the threads of the current process. */ for_each_thread (current_thread->id.pid (), [&] (thread_info *thread) { update_registers_callback (thread, watch, i); }); return 0; } /* We're out of watchpoints. */ return -1; } /* Remove hardware break-/watchpoint. */ static int arm_remove_point (enum raw_bkpt_type type, CORE_ADDR addr, int len, struct raw_breakpoint *bp) { struct process_info *proc = current_process (); struct arm_linux_hw_breakpoint p, *pts; int watch, i, count; watch = arm_linux_hw_point_initialize (type, addr, len, &p); if (watch < 0) { /* Unsupported. */ return -1; } if (watch) { count = arm_linux_get_hw_watchpoint_count (); pts = proc->priv->arch_private->wpts; } else { count = arm_linux_get_hw_breakpoint_count (); pts = proc->priv->arch_private->bpts; } for (i = 0; i < count; i++) if (arm_linux_hw_breakpoint_equal (&p, pts + i)) { pts[i].control = arm_hwbp_control_disable (pts[i].control); /* Only update the threads of the current process. */ for_each_thread (current_thread->id.pid (), [&] (thread_info *thread) { update_registers_callback (thread, watch, i); }); return 0; } /* No watchpoint matched. */ return -1; } /* Return whether current thread is stopped due to a watchpoint. */ static int arm_stopped_by_watchpoint (void) { struct lwp_info *lwp = get_thread_lwp (current_thread); siginfo_t siginfo; /* We must be able to set hardware watchpoints. */ if (arm_linux_get_hw_watchpoint_count () == 0) return 0; /* Retrieve siginfo. */ errno = 0; ptrace (PTRACE_GETSIGINFO, lwpid_of (current_thread), 0, &siginfo); if (errno != 0) return 0; /* This must be a hardware breakpoint. */ if (siginfo.si_signo != SIGTRAP || (siginfo.si_code & 0xffff) != 0x0004 /* TRAP_HWBKPT */) return 0; /* If we are in a positive slot then we're looking at a breakpoint and not a watchpoint. */ if (siginfo.si_errno >= 0) return 0; /* Cache stopped data address for use by arm_stopped_data_address. */ lwp->arch_private->stopped_data_address = (CORE_ADDR) (uintptr_t) siginfo.si_addr; return 1; } /* Return data address that triggered watchpoint. Called only if arm_stopped_by_watchpoint returned true. */ static CORE_ADDR arm_stopped_data_address (void) { struct lwp_info *lwp = get_thread_lwp (current_thread); return lwp->arch_private->stopped_data_address; } /* Called when a new process is created. */ static struct arch_process_info * arm_new_process (void) { struct arch_process_info *info = XCNEW (struct arch_process_info); return info; } /* Called when a process is being deleted. */ static void arm_delete_process (struct arch_process_info *info) { xfree (info); } /* Called when a new thread is detected. */ static void arm_new_thread (struct lwp_info *lwp) { struct arch_lwp_info *info = XCNEW (struct arch_lwp_info); int i; for (i = 0; i < MAX_BPTS; i++) info->bpts_changed[i] = 1; for (i = 0; i < MAX_WPTS; i++) info->wpts_changed[i] = 1; lwp->arch_private = info; } /* Function to call when a thread is being deleted. */ static void arm_delete_thread (struct arch_lwp_info *arch_lwp) { xfree (arch_lwp); } static void arm_new_fork (struct process_info *parent, struct process_info *child) { struct arch_process_info *parent_proc_info; struct arch_process_info *child_proc_info; struct lwp_info *child_lwp; struct arch_lwp_info *child_lwp_info; int i; /* These are allocated by linux_add_process. */ gdb_assert (parent->priv != NULL && parent->priv->arch_private != NULL); gdb_assert (child->priv != NULL && child->priv->arch_private != NULL); parent_proc_info = parent->priv->arch_private; child_proc_info = child->priv->arch_private; /* Linux kernel before 2.6.33 commit 72f674d203cd230426437cdcf7dd6f681dad8b0d will inherit hardware debug registers from parent on fork/vfork/clone. Newer Linux kernels create such tasks with zeroed debug registers. GDB core assumes the child inherits the watchpoints/hw breakpoints of the parent, and will remove them all from the forked off process. Copy the debug registers mirrors into the new process so that all breakpoints and watchpoints can be removed together. The debug registers mirror will become zeroed in the end before detaching the forked off process, thus making this compatible with older Linux kernels too. */ *child_proc_info = *parent_proc_info; /* Mark all the hardware breakpoints and watchpoints as changed to make sure that the registers will be updated. */ child_lwp = find_lwp_pid (ptid_t (child->pid)); child_lwp_info = child_lwp->arch_private; for (i = 0; i < MAX_BPTS; i++) child_lwp_info->bpts_changed[i] = 1; for (i = 0; i < MAX_WPTS; i++) child_lwp_info->wpts_changed[i] = 1; } /* Called when resuming a thread. If the debug regs have changed, update the thread's copies. */ static void arm_prepare_to_resume (struct lwp_info *lwp) { struct thread_info *thread = get_lwp_thread (lwp); int pid = lwpid_of (thread); struct process_info *proc = find_process_pid (pid_of (thread)); struct arch_process_info *proc_info = proc->priv->arch_private; struct arch_lwp_info *lwp_info = lwp->arch_private; int i; for (i = 0; i < arm_linux_get_hw_breakpoint_count (); i++) if (lwp_info->bpts_changed[i]) { errno = 0; if (arm_hwbp_control_is_enabled (proc_info->bpts[i].control)) if (ptrace (PTRACE_SETHBPREGS, pid, (PTRACE_TYPE_ARG3) ((i << 1) + 1), &proc_info->bpts[i].address) < 0) perror_with_name ("Unexpected error setting breakpoint address"); if (arm_hwbp_control_is_initialized (proc_info->bpts[i].control)) if (ptrace (PTRACE_SETHBPREGS, pid, (PTRACE_TYPE_ARG3) ((i << 1) + 2), &proc_info->bpts[i].control) < 0) perror_with_name ("Unexpected error setting breakpoint"); lwp_info->bpts_changed[i] = 0; } for (i = 0; i < arm_linux_get_hw_watchpoint_count (); i++) if (lwp_info->wpts_changed[i]) { errno = 0; if (arm_hwbp_control_is_enabled (proc_info->wpts[i].control)) if (ptrace (PTRACE_SETHBPREGS, pid, (PTRACE_TYPE_ARG3) -((i << 1) + 1), &proc_info->wpts[i].address) < 0) perror_with_name ("Unexpected error setting watchpoint address"); if (arm_hwbp_control_is_initialized (proc_info->wpts[i].control)) if (ptrace (PTRACE_SETHBPREGS, pid, (PTRACE_TYPE_ARG3) -((i << 1) + 2), &proc_info->wpts[i].control) < 0) perror_with_name ("Unexpected error setting watchpoint"); lwp_info->wpts_changed[i] = 0; } } /* Find the next pc for a sigreturn or rt_sigreturn syscall. In addition, set IS_THUMB depending on whether we will return to ARM or Thumb code. See arm-linux.h for stack layout details. */ static CORE_ADDR arm_sigreturn_next_pc (struct regcache *regcache, int svc_number, int *is_thumb) { unsigned long sp; unsigned long sp_data; /* Offset of PC register. */ int pc_offset = 0; CORE_ADDR next_pc = 0; uint32_t cpsr; gdb_assert (svc_number == __NR_sigreturn || svc_number == __NR_rt_sigreturn); collect_register_by_name (regcache, "sp", &sp); the_target->read_memory (sp, (unsigned char *) &sp_data, 4); pc_offset = arm_linux_sigreturn_next_pc_offset (sp, sp_data, svc_number, __NR_sigreturn == svc_number ? 1 : 0); the_target->read_memory (sp + pc_offset, (unsigned char *) &next_pc, 4); /* Set IS_THUMB according the CPSR saved on the stack. */ the_target->read_memory (sp + pc_offset + 4, (unsigned char *) &cpsr, 4); *is_thumb = ((cpsr & CPSR_T) != 0); return next_pc; } /* When PC is at a syscall instruction, return the PC of the next instruction to be executed. */ static CORE_ADDR get_next_pcs_syscall_next_pc (struct arm_get_next_pcs *self) { CORE_ADDR next_pc = 0; CORE_ADDR pc = regcache_read_pc (self->regcache); int is_thumb = arm_is_thumb_mode (); ULONGEST svc_number = 0; struct regcache *regcache = self->regcache; if (is_thumb) { collect_register (regcache, 7, &svc_number); next_pc = pc + 2; } else { unsigned long this_instr; unsigned long svc_operand; target_read_memory (pc, (unsigned char *) &this_instr, 4); svc_operand = (0x00ffffff & this_instr); if (svc_operand) /* OABI. */ { svc_number = svc_operand - 0x900000; } else /* EABI. */ { collect_register (regcache, 7, &svc_number); } next_pc = pc + 4; } /* This is a sigreturn or sigreturn_rt syscall. */ if (svc_number == __NR_sigreturn || svc_number == __NR_rt_sigreturn) { /* SIGRETURN or RT_SIGRETURN may affect the arm thumb mode, so update IS_THUMB. */ next_pc = arm_sigreturn_next_pc (regcache, svc_number, &is_thumb); } /* Addresses for calling Thumb functions have the bit 0 set. */ if (is_thumb) next_pc = MAKE_THUMB_ADDR (next_pc); return next_pc; } static const struct target_desc * arm_read_description (void) { unsigned long arm_hwcap = linux_get_hwcap (4); if (arm_hwcap & HWCAP_IWMMXT) return arm_linux_read_description (ARM_FP_TYPE_IWMMXT); if (arm_hwcap & HWCAP_VFP) { /* Make sure that the kernel supports reading VFP registers. Support was added in 2.6.30. */ int pid = lwpid_of (current_thread); errno = 0; char *buf = (char *) alloca (ARM_VFP3_REGS_SIZE); if (ptrace (PTRACE_GETVFPREGS, pid, 0, buf) < 0 && errno == EIO) return arm_linux_read_description (ARM_FP_TYPE_NONE); /* NEON implies either no VFP, or VFPv3-D32. We only support it with VFP. */ if (arm_hwcap & HWCAP_NEON) return aarch32_linux_read_description (); else if ((arm_hwcap & (HWCAP_VFPv3 | HWCAP_VFPv3D16)) == HWCAP_VFPv3) return arm_linux_read_description (ARM_FP_TYPE_VFPV3); else return arm_linux_read_description (ARM_FP_TYPE_VFPV2); } /* The default configuration uses legacy FPA registers, probably simulated. */ return arm_linux_read_description (ARM_FP_TYPE_NONE); } void arm_target::low_arch_setup () { int tid = lwpid_of (current_thread); int gpregs[18]; struct iovec iov; /* Query hardware watchpoint/breakpoint capabilities. */ arm_linux_init_hwbp_cap (tid); current_process ()->tdesc = arm_read_description (); iov.iov_base = gpregs; iov.iov_len = sizeof (gpregs); /* Check if PTRACE_GETREGSET works. */ if (ptrace (PTRACE_GETREGSET, tid, NT_PRSTATUS, &iov) == 0) have_ptrace_getregset = 1; else have_ptrace_getregset = 0; } /* Fetch the next possible PCs after the current instruction executes. */ static std::vector arm_gdbserver_get_next_pcs (struct regcache *regcache) { struct arm_get_next_pcs next_pcs_ctx; arm_get_next_pcs_ctor (&next_pcs_ctx, &get_next_pcs_ops, /* Byte order is ignored assumed as host. */ 0, 0, 1, regcache); return arm_get_next_pcs (&next_pcs_ctx); } /* Support for hardware single step. */ static int arm_supports_hardware_single_step (void) { return 0; } /* Implementation of linux_target_ops method "get_syscall_trapinfo". */ static void arm_get_syscall_trapinfo (struct regcache *regcache, int *sysno) { if (arm_is_thumb_mode ()) collect_register_by_name (regcache, "r7", sysno); else { unsigned long pc; unsigned long insn; collect_register_by_name (regcache, "pc", &pc); if (the_target->read_memory (pc - 4, (unsigned char *) &insn, 4)) *sysno = UNKNOWN_SYSCALL; else { unsigned long svc_operand = (0x00ffffff & insn); if (svc_operand) { /* OABI */ *sysno = svc_operand - 0x900000; } else { /* EABI */ collect_register_by_name (regcache, "r7", sysno); } } } } /* Register sets without using PTRACE_GETREGSET. */ static struct regset_info arm_regsets[] = { { PTRACE_GETREGS, PTRACE_SETREGS, 0, ARM_CORE_REGS_SIZE + ARM_INT_REGISTER_SIZE, GENERAL_REGS, arm_fill_gregset, arm_store_gregset }, { PTRACE_GETWMMXREGS, PTRACE_SETWMMXREGS, 0, IWMMXT_REGS_SIZE, EXTENDED_REGS, arm_fill_wmmxregset, arm_store_wmmxregset }, { PTRACE_GETVFPREGS, PTRACE_SETVFPREGS, 0, ARM_VFP3_REGS_SIZE, EXTENDED_REGS, arm_fill_vfpregset, arm_store_vfpregset }, NULL_REGSET }; static struct regsets_info arm_regsets_info = { arm_regsets, /* regsets */ 0, /* num_regsets */ NULL, /* disabled_regsets */ }; static struct usrregs_info arm_usrregs_info = { arm_num_regs, arm_regmap, }; static struct regs_info regs_info_arm = { NULL, /* regset_bitmap */ &arm_usrregs_info, &arm_regsets_info }; const regs_info * arm_target::get_regs_info () { const struct target_desc *tdesc = current_process ()->tdesc; if (have_ptrace_getregset == 1 && (is_aarch32_linux_description (tdesc) || arm_linux_get_tdesc_fp_type (tdesc) == ARM_FP_TYPE_VFPV3)) return ®s_info_aarch32; return ®s_info_arm; } struct linux_target_ops the_low_target = { arm_cannot_fetch_register, arm_cannot_store_register, NULL, /* fetch_register */ linux_get_pc_32bit, linux_set_pc_32bit, arm_breakpoint_kind_from_pc, arm_sw_breakpoint_from_kind, arm_gdbserver_get_next_pcs, 0, arm_breakpoint_at, arm_supports_z_point_type, arm_insert_point, arm_remove_point, arm_stopped_by_watchpoint, arm_stopped_data_address, NULL, /* collect_ptrace_register */ NULL, /* supply_ptrace_register */ NULL, /* siginfo_fixup */ arm_new_process, arm_delete_process, arm_new_thread, arm_delete_thread, arm_new_fork, arm_prepare_to_resume, NULL, /* process_qsupported */ NULL, /* supports_tracepoints */ NULL, /* get_thread_area */ NULL, /* install_fast_tracepoint_jump_pad */ NULL, /* emit_ops */ NULL, /* get_min_fast_tracepoint_insn_len */ NULL, /* supports_range_stepping */ arm_breakpoint_kind_from_current_state, arm_supports_hardware_single_step, arm_get_syscall_trapinfo, }; /* The linux target ops object. */ linux_process_target *the_linux_target = &the_arm_target; void initialize_low_arch (void) { initialize_low_arch_aarch32 (); initialize_regsets_info (&arm_regsets_info); }