/* Read AIXcoff symbol tables and convert to internal format, for GDB. Copyright (C) 1986-1991 Free Software Foundation, Inc. Derived from coffread.c, dbxread.c, and a lot of hacking. Contributed by IBM Corporation. This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include "defs.h" #include "bfd.h" #ifdef IBM6000 /* Native only: Need struct tbtable in . */ /* AIX COFF names have a preceeding dot `.' */ #define NAMES_HAVE_DOT 1 #include #include #include #include "obstack.h" #include #ifndef NO_SYS_FILE #include #endif #include /*#include */ #include #include "symtab.h" #include "gdbtypes.h" #include "symfile.h" #include "buildsym.h" #include "coff/internal.h" /* FIXME, internal data from BFD */ #include "libcoff.h" /* FIXME, internal data from BFD */ #include "coff/rs6000.h" /* FIXME, raw file-format guts of xcoff */ /* Simplified internal version of coff symbol table information */ struct coff_symbol { char *c_name; int c_symnum; /* symbol number of this entry */ int c_nsyms; /* 0 if syment only, 1 if syment + auxent */ long c_value; int c_sclass; int c_secnum; unsigned int c_type; }; /* The COFF line table, in raw form. */ static char *linetab = NULL; /* Its actual contents */ static long linetab_offset; /* Its offset in the file */ static unsigned long linetab_size; /* Its size */ /* last function's saved coff symbol `cs' */ static struct coff_symbol fcn_cs_saved; static bfd *symfile_bfd; /* Core address of start and end of text of current source file. This is calculated from the first function seen after a C_FILE symbol. */ static CORE_ADDR cur_src_end_addr; /* Core address of the end of the first object file. */ static CORE_ADDR first_object_file_end; /* pointer to the string table */ static char *strtbl; /* length of the string table */ static int strtbl_len; /* pointer to debug section */ static char *debugsec; /* pointer to the a.out symbol table */ static char *symtbl; /* initial symbol-table-debug-string vector length */ #define INITIAL_STABVECTOR_LENGTH 40 struct pending_stabs *global_stabs; /* Nonzero if within a function (so symbols should be local, if nothing says specifically). */ int within_function; /* Local variables that hold the shift and mask values for the COFF file that we are currently reading. These come back to us from BFD, and are referenced by their macro names, as well as internally to the BTYPE, ISPTR, ISFCN, ISARY, ISTAG, and DECREF macros from ../internalcoff.h . */ static unsigned local_n_btshft; static unsigned local_n_tmask; #undef N_BTSHFT #define N_BTSHFT local_n_btshft #undef N_TMASK #define N_TMASK local_n_tmask /* Local variables that hold the sizes in the file of various COFF structures. (We only need to know this to read them from the file -- BFD will then translate the data in them, into `internal_xxx' structs in the right byte order, alignment, etc.) */ static unsigned local_symesz; /* coff_symfile_init() is the coff-specific initialization routine for reading symbols. It is passed a struct sym_fns which contains, among other things, the BFD for the file whose symbols are being read, and a slot for a pointer to "private data" which we fill with cookies and other treats for coff_symfile_read(). We will only be called if this is a COFF or COFF-like file. BFD handles figuring out the format of the file, and code in symtab.c uses BFD's determination to vector to us. The ultimate result is a new symtab (or, FIXME, eventually a psymtab). */ struct coff_symfile_info { file_ptr min_lineno_offset; /* Where in file lowest line#s are */ file_ptr max_lineno_offset; /* 1+last byte of line#s in file */ }; static void enter_line_range PARAMS ((struct subfile *, unsigned, unsigned, CORE_ADDR, CORE_ADDR, unsigned *)); static void free_debugsection PARAMS ((void)); static int init_debugsection PARAMS ((bfd *)); static int init_stringtab PARAMS ((bfd *, long, struct objfile *)); static void aixcoff_symfile_init PARAMS ((struct objfile *)); static void aixcoff_new_init PARAMS ((struct objfile *)); static void aixcoff_symfile_read PARAMS ((struct sym_fns *, CORE_ADDR, int)); static void aixcoff_symfile_finish PARAMS ((struct objfile *)); static int init_lineno PARAMS ((bfd *, long, int)); static void find_linenos PARAMS ((bfd *, sec_ptr, PTR)); static int read_symbol_lineno PARAMS ((char *, int)); static int read_symbol_nvalue PARAMS ((char *, int)); static struct symbol * process_xcoff_symbol PARAMS ((struct coff_symbol *, struct objfile *)); static void read_xcoff_symtab PARAMS ((struct objfile *, int)); static void add_stab_to_list PARAMS ((char *, struct pending_stabs **)); static void sort_syms PARAMS ((void)); static int compare_symbols PARAMS ((const void *, const void *)); /* Call sort_syms to sort alphabetically the symbols of each block of each symtab. */ static int compare_symbols (s1p, s2p) const PTR s1p; const PTR s2p; { /* Names that are less should come first. */ register struct symbol **s1 = (struct symbol **) s1p; register struct symbol **s2 = (struct symbol **) s2p; register int namediff = strcmp (SYMBOL_NAME (*s1), SYMBOL_NAME (*s2)); if (namediff != 0) return namediff; /* For symbols of the same name, registers should come first. */ return ((SYMBOL_CLASS (*s2) == LOC_REGISTER) - (SYMBOL_CLASS (*s1) == LOC_REGISTER)); } /* Sort a vector of symbols by their value. */ static void sort_syms () { register struct symtab *s; register struct objfile *objfile; register int i, nbl; register struct blockvector *bv; register struct block *b; for (objfile = object_files; objfile != NULL; objfile = objfile -> next) { for (s = objfile -> symtabs; s != NULL; s = s -> next) { bv = BLOCKVECTOR (s); nbl = BLOCKVECTOR_NBLOCKS (bv); for (i = 0; i < nbl; i++) { b = BLOCKVECTOR_BLOCK (bv, i); if (BLOCK_SHOULD_SORT (b)) { qsort (&BLOCK_SYM (b, 0), BLOCK_NSYMS (b), sizeof (struct symbol *), compare_symbols); } } } } } /* add a given stab string into given stab vector. */ static void add_stab_to_list (stabname, stabvector) char *stabname; struct pending_stabs **stabvector; { if ( *stabvector == NULL) { *stabvector = (struct pending_stabs *) xmalloc (sizeof (struct pending_stabs) + INITIAL_STABVECTOR_LENGTH * sizeof (char*)); (*stabvector)->count = 0; (*stabvector)->length = INITIAL_STABVECTOR_LENGTH; } else if ((*stabvector)->count >= (*stabvector)->length) { (*stabvector)->length += INITIAL_STABVECTOR_LENGTH; *stabvector = (struct pending_stabs *) xrealloc ((char *) *stabvector, sizeof (struct pending_stabs) + (*stabvector)->length * sizeof (char*)); } (*stabvector)->stab [(*stabvector)->count++] = stabname; } #if 0 /* for all the stabs in a given stab vector, build appropriate types and fix their symbols in given symbol vector. */ void patch_block_stabs (symbols, stabs) struct pending *symbols; struct pending_stabs *stabs; { int ii; if (!stabs) return; /* for all the stab entries, find their corresponding symbols and patch their types! */ for (ii=0; ii < stabs->count; ++ii) { char *name = stabs->stab[ii]; char *pp = (char*) index (name, ':'); struct symbol *sym = find_symbol_in_list (symbols, name, pp-name); if (!sym) { ; /* printf ("ERROR! stab symbol not found!\n"); /* FIXME */ /* The above is a false alarm. There are cases the we can have a stab, without its symbol. xlc generates this for the extern definitions in inner blocks. */ } else { pp += 2; if (*(pp-1) == 'F' || *(pp-1) == 'f') SYMBOL_TYPE (sym) = lookup_function_type (read_type (&pp)); else SYMBOL_TYPE (sym) = read_type (&pp, objfile); } } } #endif /* compare line table entry addresses. */ static int compare_lte (lte1, lte2) struct linetable_entry *lte1, *lte2; { return lte1->pc - lte2->pc; } /* Give a line table with function entries are marked, arrange its functions in assending order and strip off function entry markers and return it in a newly created table. If the old one is good enough, return the old one. */ static struct linetable * arrange_linetable (oldLineTb) struct linetable *oldLineTb; /* old linetable */ { int ii, jj, newline, /* new line count */ function_count; /* # of functions */ struct linetable_entry *fentry; /* function entry vector */ int fentry_size; /* # of function entries */ struct linetable *newLineTb; /* new line table */ #define NUM_OF_FUNCTIONS 20 fentry_size = NUM_OF_FUNCTIONS; fentry = (struct linetable_entry*) malloc (fentry_size * sizeof (struct linetable_entry)); for (function_count=0, ii=0; ii nitems; ++ii) { if (oldLineTb->item[ii].line == 0) { /* function entry found. */ if (function_count >= fentry_size) { /* make sure you have room. */ fentry_size *= 2; fentry = (struct linetable_entry*) realloc (fentry, fentry_size * sizeof (struct linetable_entry)); } fentry[function_count].line = ii; fentry[function_count].pc = oldLineTb->item[ii].pc; ++function_count; } } if (function_count == 0) { free (fentry); return oldLineTb; } else if (function_count > 1) qsort (fentry, function_count, sizeof(struct linetable_entry), compare_lte); /* allocate a new line table. */ newLineTb = (struct linetable*) malloc (sizeof (struct linetable) + (oldLineTb->nitems - function_count) * sizeof (struct linetable_entry)); /* if line table does not start with a function beginning, copy up until a function begin. */ newline = 0; if (oldLineTb->item[0].line != 0) for (newline=0; newline < oldLineTb->nitems && oldLineTb->item[newline].line; ++newline) newLineTb->item[newline] = oldLineTb->item[newline]; /* Now copy function lines one by one. */ for (ii=0; ii < function_count; ++ii) { for (jj = fentry[ii].line + 1; jj < oldLineTb->nitems && oldLineTb->item[jj].line != 0; ++jj, ++newline) newLineTb->item[newline] = oldLineTb->item[jj]; } free (fentry); newLineTb->nitems = oldLineTb->nitems - function_count; return newLineTb; } /* We try to detect the beginning of a compilation unit. That info will be used as an entry in line number recording routines (enter_line_range) */ static unsigned first_fun_line_offset; static unsigned first_fun_bf; #define mark_first_line(OFFSET, SYMNUM) \ if (!first_fun_line_offset) { \ first_fun_line_offset = OFFSET; \ first_fun_bf = SYMNUM; \ } /* include file support: C_BINCL/C_EINCL pairs will be kept in the following `IncludeChain'. At the end of each symtab (end_symtab), we will determine if we should create additional symtab's to represent if (the include files. */ typedef struct _inclTable { char *name; /* include filename */ int begin, end; /* offsets to the line table */ struct subfile *subfile; unsigned funStartLine; /* start line # of its function */ } InclTable; #define INITIAL_INCLUDE_TABLE_LENGTH 20 static InclTable *inclTable; /* global include table */ static int inclIndx; /* last entry to table */ static int inclLength; /* table length */ static int inclDepth; /* nested include depth */ static void record_include_begin (cs) struct coff_symbol *cs; { /* In aixcoff, we assume include files cannot be nested (not in .c files of course, but in corresponding .s files.) */ if (inclDepth) fatal ("aix internal: pending include file exists."); ++inclDepth; /* allocate an include file, or make room for the new entry */ if (inclLength == 0) { inclTable = (InclTable*) xmalloc (sizeof (InclTable) * INITIAL_INCLUDE_TABLE_LENGTH); bzero (inclTable, sizeof (InclTable) * INITIAL_INCLUDE_TABLE_LENGTH); inclLength = INITIAL_INCLUDE_TABLE_LENGTH; inclIndx = 0; } else if (inclIndx >= inclLength) { inclLength += INITIAL_INCLUDE_TABLE_LENGTH; inclTable = (InclTable*) xrealloc (inclTable, sizeof (InclTable) * inclLength); bzero (inclTable+inclLength-INITIAL_INCLUDE_TABLE_LENGTH, sizeof (InclTable)*INITIAL_INCLUDE_TABLE_LENGTH); } inclTable [inclIndx].name = cs->c_name; inclTable [inclIndx].begin = cs->c_value; } static void record_include_end (cs) struct coff_symbol *cs; { InclTable *pTbl; if (inclDepth == 0) fatal ("aix internal: Mismatch C_BINCL/C_EINCL pair found."); pTbl = &inclTable [inclIndx]; pTbl->end = cs->c_value; --inclDepth; ++inclIndx; } static void dumpIncludeChain () { int ii; if (inclTable && inclLength) for (ii=0; ii < inclIndx; ++ii) printf ("name: %s, begin: 0x%x, end: 0x%x\n", inclTable[ii].name, inclTable[ii].begin, inclTable[ii].end); } /* given the start and end addresses of a compilation unit (or a csect, at times) process its lines and create appropriate line vectors. */ static void process_linenos (start, end) CORE_ADDR start, end; { char *pp; int offset, ii; struct subfile main_subfile; /* subfile structure for the main compilation unit. */ /* in the main source file, any time we see a function entry, we reset this variable to function's absolute starting line number. All the following line numbers in the function are relative to this, and we record absolute line numbers in record_line(). */ int main_source_baseline = 0; unsigned *firstLine; CORE_ADDR addr; if (!(offset = first_fun_line_offset)) goto return_after_cleanup; bzero (&main_subfile, sizeof (main_subfile)); first_fun_line_offset = 0; if (inclIndx == 0) enter_line_range (&main_subfile, offset, 0, start, end, &main_source_baseline); /* else, there was source with line numbers in include files */ else { main_source_baseline = 0; for (ii=0; ii < inclIndx; ++ii) { struct subfile *tmpSubfile; /* if there is main file source before include file, enter it. */ if (offset < inclTable[ii].begin) { enter_line_range (&main_subfile, offset, inclTable[ii].begin - LINESZ, start, 0, &main_source_baseline); } /* Have a new subfile for the include file */ tmpSubfile = inclTable[ii].subfile = (struct subfile*) xmalloc (sizeof (struct subfile)); bzero (tmpSubfile, sizeof (struct subfile)); firstLine = &(inclTable[ii].funStartLine); /* enter include file's lines now. */ enter_line_range (tmpSubfile, inclTable[ii].begin, inclTable[ii].end, start, 0, firstLine); offset = inclTable[ii].end + LINESZ; } /* all the include files' line have been processed at this point. Now, enter remaining lines of the main file, if any left. */ if (offset < (linetab_offset + linetab_size + 1 - LINESZ)) { enter_line_range (&main_subfile, offset, 0, start, end, &main_source_baseline); } } /* Process main file's line numbers. */ if (main_subfile.line_vector) { struct linetable *lineTb, *lv; lv = main_subfile.line_vector; /* Line numbers are not necessarily ordered. xlc compilation will put static function to the end. */ lineTb = arrange_linetable (lv); if (lv == lineTb) { current_subfile->line_vector = (struct linetable *) xrealloc (lv, (sizeof (struct linetable) + lv->nitems * sizeof (struct linetable_entry))); } else { free (lv); current_subfile->line_vector = lineTb; } current_subfile->line_vector_length = current_subfile->line_vector->nitems; /* Now, process included files' line numbers. */ for (ii=0; ii < inclIndx; ++ii) { if ( (inclTable[ii].subfile)->line_vector) { /* Useless if!!! FIXMEmgo */ struct linetable *lineTb, *lv; lv = (inclTable[ii].subfile)->line_vector; /* Line numbers are not necessarily ordered. xlc compilation will put static function to the end. */ lineTb = arrange_linetable (lv); push_subfile (); /* For the same include file, we might want to have more than one subfile. This happens if we have something like: ...... #include "foo.h" ...... #include "foo.h" ...... while foo.h including code in it. (stupid but possible) Since start_subfile() looks at the name and uses an existing one if finds, we need to provide a fake name and fool it. */ /* start_subfile (inclTable[ii].name, (char*)0); */ start_subfile (" ?", (char*)0); current_subfile->name = obsavestring (inclTable[ii].name, strlen (inclTable[ii].name), ¤t_objfile->symbol_obstack); if (lv == lineTb) { current_subfile->line_vector = (struct linetable *) xrealloc (lv, (sizeof (struct linetable) + lv->nitems * sizeof (struct linetable_entry))); } else { free (lv); current_subfile->line_vector = lineTb; } current_subfile->line_vector_length = current_subfile->line_vector->nitems; start_subfile (pop_subfile (), (char*)0); } } } else /* I am not sure this logic is correct. There might be no lines in the main file, whereas there are some in included ones. FIXMEibm */ current_subfile->line_vector = NULL; return_after_cleanup: /* We don't want to keep alloc/free'ing the global include file table. */ inclIndx = 0; /* start with a fresh subfile structure for the next file. */ bzero (&main_subfile, sizeof (struct subfile)); } void aix_process_linenos () { /* process line numbers and enter them into line vector */ process_linenos (last_source_start_addr, cur_src_end_addr); } /* Enter a given range of lines into the line vector. can be called in the following two ways: enter_line_range (subfile, beginoffset, endoffset, startaddr, 0, firstLine) or enter_line_range (subfile, beginoffset, 0, startaddr, endaddr, firstLine) */ static void enter_line_range (subfile, beginoffset, endoffset, startaddr, endaddr, firstLine) struct subfile *subfile; unsigned beginoffset, endoffset; /* offsets to line table */ CORE_ADDR startaddr, endaddr; unsigned *firstLine; { char *pp, *limit; CORE_ADDR addr; /* Do Byte swapping, if needed. FIXME! */ #define P_LINENO(PP) (*(unsigned short*)((struct external_lineno*)(PP))->l_lnno) #define P_LINEADDR(PP) (*(long*)((struct external_lineno*)(PP))->l_addr.l_paddr) #define P_LINESYM(PP) (*(long*)((struct external_lineno*)(PP))->l_addr.l_symndx) pp = &linetab [beginoffset - linetab_offset]; limit = endoffset ? &linetab [endoffset - linetab_offset] : &linetab [linetab_size -1]; while (pp <= limit) { /* find the address this line represents */ addr = P_LINENO(pp) ? P_LINEADDR(pp) : read_symbol_nvalue (symtbl, P_LINESYM(pp)); if (addr < startaddr || (endaddr && addr > endaddr)) return; if (P_LINENO(pp) == 0) { *firstLine = read_symbol_lineno (symtbl, P_LINESYM(pp)); record_line (subfile, 0, addr); --(*firstLine); } else record_line (subfile, *firstLine + P_LINENO(pp), addr); pp += LINESZ; } } typedef struct { int fsize; /* file size */ int fixedparms; /* number of fixed parms */ int floatparms; /* number of float parms */ unsigned int parminfo; /* parameter info. See /usr/include/sys/debug.h tbtable_ext.parminfo */ int framesize; /* function frame size */ } TracebackInfo; /* Given a function symbol, return its traceback information. */ TracebackInfo * retrieve_tracebackinfo (abfd, textsec, cs) bfd *abfd; sec_ptr textsec; struct coff_symbol *cs; { #define TBTABLE_BUFSIZ 2000 #define MIN_TBTABSIZ 50 /* minimum buffer size to hold a traceback table. */ static TracebackInfo tbInfo; struct tbtable *ptb; static char buffer [TBTABLE_BUFSIZ]; int *pinsn; int bytesread=0; /* total # of bytes read so far */ int bufferbytes; /* number of bytes in the buffer */ int functionstart = cs->c_value - textsec->vma; bzero (&tbInfo, sizeof (tbInfo)); /* keep reading blocks of data from the text section, until finding a zero word and a traceback table. */ while (bfd_get_section_contents (abfd, textsec, buffer, (file_ptr)(functionstart + bytesread), bufferbytes = ( (TBTABLE_BUFSIZ < (textsec->_raw_size - functionstart - bytesread)) ? TBTABLE_BUFSIZ : (textsec->_raw_size - functionstart - bytesread)))) { bytesread += bufferbytes; pinsn = (int*) buffer; /* if this is the first time we filled the buffer, retrieve function framesize info. */ if (bytesread == bufferbytes) { /* skip over unrelated instructions */ if (*pinsn == 0x7c0802a6) /* mflr r0 */ ++pinsn; if ((*pinsn & 0xfc00003e) == 0x7c000026) /* mfcr Rx */ ++pinsn; if ((*pinsn & 0xfc000000) == 0x48000000) /* bl foo, save fprs */ ++pinsn; if ((*pinsn & 0xfc1f0000) == 0xbc010000) /* stm Rx, NUM(r1) */ ++pinsn; do { int tmp = (*pinsn >> 16) & 0xffff; if (tmp == 0x9421) { /* stu r1, NUM(r1) */ tbInfo.framesize = 0x10000 - (*pinsn & 0xffff); break; } else if ((*pinsn == 0x93e1fffc) || /* st r31,-4(r1) */ (tmp == 0x9001)) /* st r0, NUM(r1) */ ; /* else, could not find a frame size. */ else return NULL; } while (++pinsn && *pinsn); if (!tbInfo.framesize) return NULL; } /* look for a zero word. */ while (*pinsn && (pinsn < (int*)(buffer + bufferbytes - sizeof(int)))) ++pinsn; if (pinsn >= (int*)(buffer + bufferbytes)) continue; if (*pinsn == 0) { /* function size is the amount of bytes we have skipped so far. */ tbInfo.fsize = bytesread - (buffer + bufferbytes - (char*)pinsn); ++pinsn; /* if we don't have the whole traceback table in the buffer, re-read the whole thing. */ if ((char*)pinsn > (buffer + bufferbytes - MIN_TBTABSIZ)) { /* In case if we are *very* close to the end of the text section and cannot read properly from that point on, abort by returning NULL. Handle this case more graciously -- FIXME */ if (!bfd_get_section_contents ( abfd, textsec, buffer, (file_ptr)(functionstart + bytesread - (buffer + bufferbytes - (char*)pinsn)),MIN_TBTABSIZ)) { printf ("Abnormal return!..\n"); return NULL; } ptb = (struct tbtable *)buffer; } else ptb = (struct tbtable *)pinsn; tbInfo.fixedparms = ptb->tb.fixedparms; tbInfo.floatparms = ptb->tb.floatparms; tbInfo.parminfo = ptb->tb_ext.parminfo; return &tbInfo; } } return NULL; } #if 0 /* Given a function symbol, return a pointer to its traceback table. */ struct tbtable * retrieve_traceback (abfd, textsec, cs, size) bfd *abfd; sec_ptr textsec; struct coff_symbol *cs; int *size; /* return function size */ { #define TBTABLE_BUFSIZ 2000 #define MIN_TBTABSIZ 50 /* minimum buffer size to hold a traceback table. */ static char buffer [TBTABLE_BUFSIZ]; int *pinsn; int bytesread=0; /* total # of bytes read so far */ int bufferbytes; /* number of bytes in the buffer */ int functionstart = cs->c_value - textsec->filepos + textsec->vma; *size = 0; /* keep reading blocks of data from the text section, until finding a zero word and a traceback table. */ while (bfd_get_section_contents (abfd, textsec, buffer, (file_ptr)(functionstart + bytesread), bufferbytes = ( (TBTABLE_BUFSIZ < (textsec->size - functionstart - bytesread)) ? TBTABLE_BUFSIZ : (textsec->size - functionstart - bytesread)))) { bytesread += bufferbytes; pinsn = (int*) buffer; /* look for a zero word. */ while (*pinsn && (pinsn < (int*)(buffer + bufferbytes - sizeof(int)))) ++pinsn; if (pinsn >= (int*)(buffer + bufferbytes)) continue; if (*pinsn == 0) { /* function size is the amount of bytes we have skipped so far. */ *size = bytesread - (buffer + bufferbytes - pinsn); ++pinsn; /* if we don't have the whole traceback table in the buffer, re-read the whole thing. */ if ((char*)pinsn > (buffer + bufferbytes - MIN_TBTABSIZ)) { /* In case if we are *very* close to the end of the text section and cannot read properly from that point on, abort for now. Handle this case more graciously -- FIXME */ if (!bfd_get_section_contents ( abfd, textsec, buffer, (file_ptr)(functionstart + bytesread - (buffer + bufferbytes - pinsn)),MIN_TBTABSIZ)) /* abort (); */ { printf ("abort!!!\n"); return NULL; } return (struct tbtable *)buffer; } else return (struct tbtable *)pinsn; } } return NULL; } #endif /* 0 */ /* Save the vital information for use when closing off the current file. NAME is the file name the symbols came from, START_ADDR is the first text address for the file, and SIZE is the number of bytes of text. */ #define complete_symtab(name, start_addr) { \ last_source_file = savestring (name, strlen (name)); \ last_source_start_addr = start_addr; \ } /* Refill the symbol table input buffer and set the variables that control fetching entries from it. Reports an error if no data available. This function can read past the end of the symbol table (into the string table) but this does no harm. */ /* Reading symbol table has to be fast! Keep the followings as macros, rather than functions. */ #define RECORD_MINIMAL_SYMBOL(NAME, ADDR, TYPE, ALLOCED) \ { \ char *namestr; \ if (ALLOCED) \ namestr = (NAME) + 1; \ else { \ namestr = obstack_copy0 (&objfile->symbol_obstack, (NAME) + 1, strlen ((NAME)+1)); \ (ALLOCED) = 1; \ } \ prim_record_minimal_symbol (namestr, (ADDR), (TYPE)); \ misc_func_recorded = 1; \ } /* A parameter template, used by ADD_PARM_TO_PENDING. */ static struct symbol parmsym = { /* default parameter symbol */ "", /* name */ VAR_NAMESPACE, /* namespace */ LOC_ARG, /* class */ NULL, /* type */ 0, /* line number */ 0, /* value */ }; /* Add a parameter to a given pending symbol list. */ #define ADD_PARM_TO_PENDING(PARM, VALUE, PTYPE, PENDING_SYMBOLS) \ { \ PARM = (struct symbol *) \ obstack_alloc (&objfile->symbol_obstack, sizeof (struct symbol)); \ *(PARM) = parmsym; \ SYMBOL_TYPE (PARM) = PTYPE; \ SYMBOL_VALUE (PARM) = VALUE; \ add_symbol_to_list (PARM, &PENDING_SYMBOLS); \ } /* aixcoff has static blocks marked in `.bs', `.es' pairs. They cannot be nested. At any given time, a symbol can only be in one static block. This is the base address of current static block, zero if non exists. */ static int static_block_base = 0; /* true if space for symbol name has been allocated. */ static int symname_alloced = 0; /* read the whole symbol table of a given bfd. */ static void read_xcoff_symtab (objfile, nsyms) struct objfile *objfile; /* Object file we're reading from */ int nsyms; /* # of symbols */ { bfd *abfd = objfile->obfd; char *raw_symbol; /* Pointer into raw seething symbol table */ char *raw_auxptr; /* Pointer to first raw aux entry for sym */ sec_ptr textsec; /* Pointer to text section */ TracebackInfo *ptb; /* Pointer to traceback table */ struct internal_syment symbol[1]; union internal_auxent main_aux[1]; struct coff_symbol cs[1]; CORE_ADDR file_start_addr = 0; CORE_ADDR file_end_addr = 0; int next_file_symnum = -1; int just_started = 1; int depth = 0; int val; int fcn_last_line; int fcn_start_addr; long fcn_line_offset; size_t size; /* fcn_cs_saved is global because process_xcoff_symbol needs it. */ union internal_auxent fcn_aux_saved; struct type *fcn_type_saved = NULL; struct context_stack *new; char *filestring = " _start_ "; /* Name of the current file. */ char *last_csect_name; /* last seen csect's name and value */ CORE_ADDR last_csect_val; int misc_func_recorded; /* true if any misc. function */ current_objfile = objfile; /* Get the appropriate COFF "constants" related to the file we're handling. */ N_TMASK = coff_data (abfd)->local_n_tmask; N_BTSHFT = coff_data (abfd)->local_n_btshft; local_symesz = coff_data (abfd)->local_symesz; last_source_file = 0; last_csect_name = 0; last_csect_val = 0; misc_func_recorded = 0; start_symtab (filestring, (char *)NULL, file_start_addr); symnum = 0; first_object_file_end = 0; /* Allocate space for the entire symbol table at once, and read it all in. The bfd is already positioned at the beginning of the symbol table. */ size = coff_data (abfd)->local_symesz * nsyms; symtbl = xmalloc (size); val = bfd_read (symtbl, size, 1, abfd); if (val != size) perror_with_name ("reading symbol table"); raw_symbol = symtbl; textsec = bfd_get_section_by_name (abfd, ".text"); if (!textsec) { printf ("Unable to locate text section!\n"); } while (symnum < nsyms) { QUIT; /* make this command interruptable. */ /* READ_ONE_SYMBOL (symbol, cs, symname_alloced); */ /* read one symbol into `cs' structure. After processing the whole symbol table, only string table will be kept in memory, symbol table and debug section of aixcoff will be freed. Thus we can mark symbols with names in string table as `alloced'. */ { int ii; /* Swap and align the symbol into a reasonable C structure. */ bfd_coff_swap_sym_in (abfd, raw_symbol, symbol); cs->c_symnum = symnum; cs->c_nsyms = symbol->n_numaux; if (symbol->n_zeroes) { symname_alloced = 0; /* We must use the original, unswapped, name here so the name field pointed to by cs->c_name will persist throughout xcoffread. If we use the new field, it gets overwritten for each symbol. */ cs->c_name = ((struct external_syment *)raw_symbol)->e.e_name; } else if (symbol->n_sclass & 0x80) { cs->c_name = debugsec + symbol->n_offset; symname_alloced = 0; } else { /* in string table */ cs->c_name = strtbl + (int)symbol->n_offset; symname_alloced = 1; } cs->c_value = symbol->n_value; cs->c_sclass = symbol->n_sclass & 0xff; cs->c_secnum = symbol->n_scnum; cs->c_type = (unsigned)symbol->n_type; raw_symbol += coff_data (abfd)->local_symesz; ++symnum; raw_auxptr = raw_symbol; /* Save addr of first aux entry */ /* Skip all the auxents associated with this symbol. */ for (ii = symbol->n_numaux; ii; --ii ) { raw_symbol += coff_data (abfd)->local_auxesz; ++symnum; } } /* if symbol name starts with ".$" or "$", ignore it. */ if (cs->c_name[0] == '$' || (cs->c_name[1] == '$' && cs->c_name[0] == '.')) continue; if (cs->c_symnum == next_file_symnum && cs->c_sclass != C_FILE) { if (last_source_file) end_symtab (cur_src_end_addr, 1, 0, objfile); start_symtab ("_globals_", (char *)NULL, (CORE_ADDR)0); cur_src_end_addr = first_object_file_end; /* done with all files, everything from here on is globals */ } /* if explicitly specified as a function, treat is as one. */ if (ISFCN(cs->c_type) && cs->c_sclass != C_TPDEF) { bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass, main_aux); goto function_entry_point; } if ((cs->c_sclass == C_EXT || cs->c_sclass == C_HIDEXT) && cs->c_nsyms == 1) { /* dealing with a symbol with a csect entry. */ # define CSECT(PP) ((PP)->x_csect) # define CSECT_LEN(PP) (CSECT(PP).x_scnlen) # define CSECT_ALIGN(PP) (SMTYP_ALIGN(CSECT(PP).x_smtyp)) # define CSECT_SMTYP(PP) (SMTYP_SMTYP(CSECT(PP).x_smtyp)) # define CSECT_SCLAS(PP) (CSECT(PP).x_smclas) /* Convert the auxent to something we can access. */ bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass, main_aux); switch (CSECT_SMTYP (main_aux)) { case XTY_ER : continue; /* ignore all external references. */ case XTY_SD : /* a section description. */ { switch (CSECT_SCLAS (main_aux)) { case XMC_PR : /* a `.text' csect. */ { /* A program csect is seen. We have to allocate one symbol table for each program csect. Normally gdb prefers one symtab for each compilation unit (CU). In case of AIX, one CU might include more than one prog csect, and they don't have to be adjacent in terms of the space they occupy in memory. Thus, one single CU might get fragmented in the memory and gdb's file start and end address approach does not work! */ if (last_csect_name) { /* if no misc. function recorded in the last seen csect, enter it as a function. This will take care of functions like strcmp() compiled by xlc. */ if (!misc_func_recorded) { int alloced = 0; RECORD_MINIMAL_SYMBOL (last_csect_name, last_csect_val, mst_text, alloced); } complete_symtab (filestring, file_start_addr); cur_src_end_addr = file_end_addr; end_symtab (file_end_addr, 1, 0, objfile); start_symtab ((char *)NULL, (char *)NULL, (CORE_ADDR)0); } /* If this is the very first csect seen, basically `__start'. */ if (just_started) { first_object_file_end = cs->c_value + CSECT_LEN (main_aux); just_started = 0; } file_start_addr = cs->c_value; file_end_addr = cs->c_value + CSECT_LEN (main_aux); if (cs->c_name && cs->c_name[0] == '.') { last_csect_name = cs->c_name; last_csect_val = cs->c_value; } } misc_func_recorded = 0; continue; case XMC_RW : break; /* If the section is not a data description, ignore it. Note that uninitialized data will show up as XTY_CM/XMC_RW pair. */ case XMC_TC0: #ifdef XCOFF_ADD_TOC_TO_LOADINFO XCOFF_ADD_TOC_TO_LOADINFO (cs->c_value); #endif /* fall down to default case. */ case XMC_TC : /* ignore toc entries */ default : /* any other XMC_XXX */ continue; } } break; /* switch CSECT_SCLAS() */ case XTY_LD : /* a function entry point. */ if (CSECT_SCLAS (main_aux) == XMC_PR) { function_entry_point: RECORD_MINIMAL_SYMBOL (cs->c_name, cs->c_value, mst_text, symname_alloced); fcn_line_offset = main_aux->x_sym.x_fcnary.x_fcn.x_lnnoptr; fcn_start_addr = cs->c_value; /* save the function header info, which will be used when `.bf' is seen. */ fcn_cs_saved = *cs; fcn_aux_saved = *main_aux; ptb = NULL; /* If function has two auxent, then debugging information is already available for it. Process traceback table for functions with only one auxent. */ if (cs->c_nsyms == 1) ptb = retrieve_tracebackinfo (abfd, textsec, cs); else if (cs->c_nsyms != 2) abort (); /* If there is traceback info, create and add parameters for it. */ if (ptb && (ptb->fixedparms || ptb->floatparms)) { int parmcnt = ptb->fixedparms + ptb->floatparms; char *parmcode = (char*) &ptb->parminfo; int parmvalue = ptb->framesize + 0x18; /* sizeof(LINK AREA) == 0x18 */ unsigned int ii, mask; for (ii=0, mask = 0x80000000; ii parminfo & mask) { /* float or double */ mask = mask >> 1; if (ptb->parminfo & mask) { /* double parm */ ADD_PARM_TO_PENDING (parm, parmvalue, builtin_type_double, local_symbols); parmvalue += sizeof (double); } else { /* float parm */ ADD_PARM_TO_PENDING (parm, parmvalue, builtin_type_float, local_symbols); parmvalue += sizeof (float); } } else { /* fixed parm, use (int*) for hex rep. */ ADD_PARM_TO_PENDING (parm, parmvalue, lookup_pointer_type (builtin_type_int), local_symbols); parmvalue += sizeof (int); } mask = mask >> 1; } /* Fake this as a function. Needed in process_xcoff_symbol() */ cs->c_type = 32; finish_block(process_xcoff_symbol (cs, objfile), &local_symbols, pending_blocks, cs->c_value, cs->c_value + ptb->fsize, objfile); } continue; } /* shared library function trampoline code entry point. */ else if (CSECT_SCLAS (main_aux) == XMC_GL) { /* record trampoline code entries as mst_unknown symbol. When we lookup mst symbols, we will choose mst_text over mst_unknown. */ RECORD_MINIMAL_SYMBOL (cs->c_name, cs->c_value, mst_unknown, symname_alloced); continue; } break; default : /* all other XTY_XXXs */ break; } /* switch CSECT_SMTYP() */ } switch (cs->c_sclass) { case C_FILE: /* see if the last csect needs to be recorded. */ if (last_csect_name && !misc_func_recorded) { /* if no misc. function recorded in the last seen csect, enter it as a function. This will take care of functions like strcmp() compiled by xlc. */ int alloced = 0; RECORD_MINIMAL_SYMBOL (last_csect_name, last_csect_val, mst_text, alloced); } /* c_value field contains symnum of next .file entry in table or symnum of first global after last .file. */ next_file_symnum = cs->c_value; /* complete symbol table for last object file containing debugging information. */ /* Whether or not there was a csect in the previous file, we have to call `end_symtab' and `start_symtab' to reset type_vector, line_vector, etc. structures. */ complete_symtab (filestring, file_start_addr); cur_src_end_addr = file_end_addr; end_symtab (file_end_addr, 1, 0, objfile); start_symtab (cs->c_name, (char *)NULL, (CORE_ADDR)0); last_csect_name = 0; /* reset file start and end addresses. A compilation unit with no text (only data) should have zero file boundaries. */ file_start_addr = file_end_addr = 0; filestring = cs->c_name; break; case C_FUN: /* For a function stab, just save its type in `fcn_type_saved', and leave it for the `.bf' processing. */ { char *pp = (char*) index (cs->c_name, ':'); if (!pp || ( *(pp+1) != 'F' && *(pp+1) != 'f')) fatal ("Unrecognized stab"); pp += 2; if (fcn_type_saved) fatal ("Unprocessed function type"); fcn_type_saved = lookup_function_type (read_type (&pp, objfile)); } break; case C_FCN: if (strcmp (cs->c_name, ".bf") == 0) { bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass, main_aux); within_function = 1; /* Linenos are now processed on a file-by-file, not fn-by-fn, basis. Metin did it, I'm not sure why. FIXME. -- gnu@cygnus.com */ /* Two reasons: 1) xlc (IBM's native c compiler) postpones static function code emission to the end of a compilation unit. This way it can determine if those functions (statics) are needed or not, and can do some garbage collection (I think). This makes line numbers and corresponding addresses unordered, and we end up with a line table like: lineno addr foo() 10 0x100 20 0x200 30 0x300 foo3() 70 0x400 80 0x500 90 0x600 static foo2() 40 0x700 50 0x800 60 0x900 and that breaks gdb's binary search on line numbers, if the above table is not sorted on line numbers. And that sort should be on function based, since gcc can emit line numbers like: 10 0x100 - for the init/test part of a for stmt. 20 0x200 30 0x300 10 0x400 - for the increment part of a for stmt. arrange_linenos() will do this sorting. 2) aix symbol table might look like: c_file // beginning of a new file .bi // beginning of include file .ei // end of include file .bi .ei basically, .bi/.ei pairs do not necessarily encapsulate their scope. They need to be recorded, and processed later on when we come the end of the compilation unit. Include table (inclTable) and process_linenos() handle that. */ mark_first_line (fcn_line_offset, cs->c_symnum); new = push_context (0, fcn_start_addr); new->name = process_xcoff_symbol (&fcn_cs_saved, objfile); /* Between a function symbol and `.bf', there always will be a function stab. We save function type when processing that stab. */ if (fcn_type_saved == NULL) { printf ("Unknown function type: symbol 0x%x\n", cs->c_symnum); SYMBOL_TYPE (new->name) = lookup_function_type (builtin_type_int); } else { SYMBOL_TYPE (new->name) = fcn_type_saved; fcn_type_saved = NULL; } } else if (strcmp (cs->c_name, ".ef") == 0) { bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass, main_aux); /* the value of .ef is the address of epilogue code; not useful for gdb */ /* { main_aux.x_sym.x_misc.x_lnsz.x_lnno contains number of lines to '}' */ fcn_last_line = main_aux->x_sym.x_misc.x_lnsz.x_lnno; new = pop_context (); if (context_stack_depth != 0) error ("invalid symbol data; .bf/.ef/.bb/.eb symbol mismatch, at symbol %d.", symnum); finish_block (new->name, &local_symbols, new->old_blocks, new->start_addr, fcn_cs_saved.c_value + fcn_aux_saved.x_sym.x_misc.x_fsize, objfile); within_function = 0; } break; case C_BSTAT : /* begin static block */ static_block_base = read_symbol_nvalue (symtbl, cs->c_value); break; case C_ESTAT : /* end of static block */ static_block_base = 0; break; case C_ARG : /* These are not implemented. */ case C_REGPARM : case C_TPDEF : case C_STRTAG : case C_UNTAG : case C_ENTAG : printf ("ERROR: Unimplemented storage class: %d.\n", cs->c_sclass); break; case C_HIDEXT : /* ignore these.. */ case C_LABEL : case C_NULL : break; case C_BINCL : /* beginning of include file */ /* In xlc output, C_BINCL/C_EINCL pair doesn't show up in sorted order. Thus, when wee see them, we might not know enough info to process them. Thus, we'll be saving them into a table (inclTable) and postpone their processing. */ record_include_begin (cs); break; case C_EINCL : /* end of include file */ /* see the comment after case C_BINCL. */ record_include_end (cs); break; case C_BLOCK : if (strcmp (cs->c_name, ".bb") == 0) { depth++; new = push_context (depth, cs->c_value); } else if (strcmp (cs->c_name, ".eb") == 0) { new = pop_context (); if (depth != new->depth) error ("Invalid symbol data: .bb/.eb symbol mismatch at symbol %d.", symnum); depth--; if (local_symbols && context_stack_depth > 0) { /* Make a block for the local symbols within. */ finish_block (new->name, &local_symbols, new->old_blocks, new->start_addr, cs->c_value, objfile); } local_symbols = new->locals; } break; default : (void) process_xcoff_symbol (cs, objfile); break; } } /* while */ if (last_source_file) end_symtab (cur_src_end_addr, 1, 0, objfile); free (symtbl); current_objfile = NULL; } #define SYMBOL_DUP(SYMBOL1, SYMBOL2) \ (SYMBOL2) = (struct symbol *) \ obstack_alloc (&objfile->symbol_obstack, sizeof (struct symbol)); \ *(SYMBOL2) = *(SYMBOL1); #define SYMNAME_ALLOC(NAME, ALLOCED) \ (ALLOCED) ? (NAME) : obstack_copy0 (&objfile->symbol_obstack, (NAME), strlen (NAME)); /* process one xcoff symbol. */ static struct symbol * process_xcoff_symbol (cs, objfile) register struct coff_symbol *cs; struct objfile *objfile; { struct symbol onesymbol; register struct symbol *sym = &onesymbol; struct symbol *sym2 = NULL; struct type *ttype; char *name, *pp, *qq; int struct_and_type_combined; int nameless; name = cs->c_name; if (name[0] == '.') ++name; bzero (sym, sizeof (struct symbol)); /* default assumptions */ SYMBOL_VALUE (sym) = cs->c_value; SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE; if (ISFCN (cs->c_type)) { /* At this point, we don't know the type of the function and assume it is int. This will be patched with the type from its stab entry later on in patch_block_stabs () */ SYMBOL_NAME (sym) = SYMNAME_ALLOC (name, symname_alloced); SYMBOL_TYPE (sym) = lookup_function_type (lookup_fundamental_type (objfile, FT_INTEGER)); SYMBOL_CLASS (sym) = LOC_BLOCK; SYMBOL_DUP (sym, sym2); if (cs->c_sclass == C_EXT) add_symbol_to_list (sym2, &global_symbols); else if (cs->c_sclass == C_HIDEXT || cs->c_sclass == C_STAT) add_symbol_to_list (sym2, &file_symbols); } else { /* in case we can't figure out the type, default is `int'. */ SYMBOL_TYPE (sym) = lookup_fundamental_type (objfile, FT_INTEGER); switch (cs->c_sclass) { #if 0 case C_FUN: if (fcn_cs_saved.c_sclass == C_EXT) add_stab_to_list (name, &global_stabs); else add_stab_to_list (name, &file_stabs); break; #endif case C_DECL: /* a type decleration?? */ qq = (char*) strchr (name, ':'); if (!qq) /* skip if there is no ':' */ return NULL; nameless = (qq == name); struct_and_type_combined = (qq[1] == 'T' && qq[2] == 't'); pp = qq + (struct_and_type_combined ? 3 : 2); /* To handle GNU C++ typename abbreviation, we need to be able to fill in a type's name as soon as space for that type is allocated. */ if (struct_and_type_combined && name != qq) { int typenums[2]; struct type *tmp_type; char *tmp_pp = pp; read_type_number (&tmp_pp, typenums); tmp_type = dbx_alloc_type (typenums, objfile); if (tmp_type && !TYPE_NAME (tmp_type) && !nameless) TYPE_NAME (tmp_type) = SYMBOL_NAME (sym) = obsavestring (name, qq-name, &objfile->symbol_obstack); } ttype = SYMBOL_TYPE (sym) = read_type (&pp, objfile); /* read_type() will return null if type (or tag) definition was unnnecessarily duplicated. Also, if the symbol doesn't have a name, there is no need to keep it in symbol table. */ /* The above argument no longer valid. read_type() never returns NULL. */ if (!ttype) return NULL; /* if there is no name for this typedef, you don't have to keep its symbol, since nobody could ask for it. Otherwise, build a symbol and add it into symbol_list. */ if (!nameless) { if (qq[1] == 'T') SYMBOL_NAMESPACE (sym) = STRUCT_NAMESPACE; else if (qq[1] == 't') SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE; else { printf ("ERROR: Unrecognized stab string.\n"); return NULL; } SYMBOL_CLASS (sym) = LOC_TYPEDEF; if (!SYMBOL_NAME (sym)) SYMBOL_NAME (sym) = obsavestring (name, qq-name, &objfile->symbol_obstack); SYMBOL_DUP (sym, sym2); add_symbol_to_list (sym2, within_function ? &local_symbols : &file_symbols); /* For a combination of struct and type, add one more symbol for the type. */ if (struct_and_type_combined) { SYMBOL_DUP (sym, sym2); SYMBOL_NAMESPACE (sym2) = VAR_NAMESPACE; add_symbol_to_list (sym2, within_function ? &local_symbols : &file_symbols); } } /* assign a name to the type node. */ if (!nameless && (!TYPE_NAME (ttype) || *(TYPE_NAME (ttype)) == '\0')) { if (struct_and_type_combined) TYPE_NAME (ttype) = SYMBOL_NAME (sym); /* else if (SYMBOL_NAMESPACE (sym) == STRUCT_NAMESPACE) */ else if (qq[1] == 'T') /* struct namespace */ TYPE_NAME (ttype) = concat ( TYPE_CODE (ttype) == TYPE_CODE_UNION ? "union " : TYPE_CODE (ttype) == TYPE_CODE_STRUCT? "struct " : "enum ", SYMBOL_NAME (sym), NULL); } break; case C_GSYM: add_stab_to_list (name, &global_stabs); break; case C_PSYM: case C_RPSYM: if (*name == ':' || (pp = (char *) strchr (name, ':')) == NULL) return NULL; SYMBOL_NAME (sym) = obsavestring (name, pp-name, &objfile -> symbol_obstack); SYMBOL_CLASS (sym) = (cs->c_sclass == C_PSYM) ? LOC_ARG : LOC_REGPARM; pp += 2; SYMBOL_TYPE (sym) = read_type (&pp, objfile); SYMBOL_DUP (sym, sym2); add_symbol_to_list (sym2, &local_symbols); break; case C_STSYM: if (*name == ':' || (pp = (char *) strchr (name, ':')) == NULL) return NULL; SYMBOL_NAME (sym) = obsavestring (name, pp-name, &objfile -> symbol_obstack); SYMBOL_CLASS (sym) = LOC_STATIC; SYMBOL_VALUE (sym) += static_block_base; pp += 2; SYMBOL_TYPE (sym) = read_type (&pp, objfile); SYMBOL_DUP (sym, sym2); add_symbol_to_list (sym2, within_function ? &local_symbols : &file_symbols); break; case C_LSYM: if (*name == ':' || (pp = (char *) strchr (name, ':')) == NULL) return NULL; SYMBOL_NAME (sym) = obsavestring (name, pp-name, &objfile -> symbol_obstack); SYMBOL_CLASS (sym) = LOC_LOCAL; pp += 1; SYMBOL_TYPE (sym) = read_type (&pp, objfile); SYMBOL_DUP (sym, sym2); add_symbol_to_list (sym2, &local_symbols); break; case C_AUTO: SYMBOL_CLASS (sym) = LOC_LOCAL; SYMBOL_NAME (sym) = SYMNAME_ALLOC (name, symname_alloced); SYMBOL_DUP (sym, sym2); add_symbol_to_list (sym2, &local_symbols); break; case C_EXT: SYMBOL_CLASS (sym) = LOC_STATIC; SYMBOL_NAME (sym) = SYMNAME_ALLOC (name, symname_alloced); SYMBOL_DUP (sym, sym2); add_symbol_to_list (sym2, &global_symbols); break; case C_STAT: SYMBOL_CLASS (sym) = LOC_STATIC; SYMBOL_NAME (sym) = SYMNAME_ALLOC (name, symname_alloced); SYMBOL_DUP (sym, sym2); add_symbol_to_list (sym2, within_function ? &local_symbols : &file_symbols); break; case C_REG: printf ("ERROR! C_REG is not fully implemented!\n"); SYMBOL_CLASS (sym) = LOC_REGISTER; SYMBOL_NAME (sym) = SYMNAME_ALLOC (name, symname_alloced); SYMBOL_DUP (sym, sym2); add_symbol_to_list (sym2, &local_symbols); break; case C_RSYM: pp = (char*) strchr (name, ':'); SYMBOL_CLASS (sym) = LOC_REGISTER; SYMBOL_VALUE (sym) = STAB_REG_TO_REGNUM (cs->c_value); if (pp) { SYMBOL_NAME (sym) = obsavestring (name, pp-name, &objfile -> symbol_obstack); pp += 2; if (*pp) SYMBOL_TYPE (sym) = read_type (&pp, objfile); } else /* else this is not a stab entry, suppose the type is either `int' or `float', depending on the register class. */ SYMBOL_TYPE (sym) = (SYMBOL_VALUE (sym) < 32) ? lookup_fundamental_type (objfile, FT_INTEGER) : lookup_fundamental_type (objfile, FT_FLOAT); SYMBOL_DUP (sym, sym2); add_symbol_to_list (sym2, &local_symbols); break; default : printf ("ERROR: Unexpected storage class: %d.\n", cs->c_sclass); return NULL; } } return sym2; } static int read_symbol_nvalue (symtable, symno) char *symtable; int symno; { struct internal_syment symbol[1]; bfd_coff_swap_sym_in (symfile_bfd, symtable + (symno*local_symesz), symbol); return symbol->n_value; } static int read_symbol_lineno (symtable, symno) char *symtable; int symno; { struct internal_syment symbol[1]; union internal_auxent main_aux[1]; int ii; for (ii = 0; ii < 50; ii++) { bfd_coff_swap_sym_in (symfile_bfd, symtable + (symno*local_symesz), symbol); if (symbol->n_sclass == C_FCN && 0 == strcmp (symbol->n_name, ".bf")) goto gotit; symno += symbol->n_numaux+1; } printf ("GDB Error: `.bf' not found.\n"); return 0; gotit: /* take aux entry and return its lineno */ symno++; bfd_coff_swap_aux_in (symfile_bfd, symtable+(symno*local_symesz), symbol->n_type, symbol->n_sclass, main_aux); return main_aux->x_sym.x_misc.x_lnsz.x_lnno; } /* Support for line number handling */ /* This function is called for every section; it finds the outer limits * of the line table (minimum and maximum file offset) so that the * mainline code can read the whole thing for efficiency. */ static void find_linenos(abfd, asect, vpinfo) bfd *abfd; sec_ptr asect; PTR vpinfo; { struct coff_symfile_info *info; int size, count; file_ptr offset, maxoff; count = asect->lineno_count; if (strcmp (asect->name, ".text") || count == 0) return; size = count * coff_data (symfile_bfd)->local_linesz; info = (struct coff_symfile_info *)vpinfo; offset = asect->line_filepos; maxoff = offset + size; if (offset < info->min_lineno_offset || info->min_lineno_offset == 0) info->min_lineno_offset = offset; if (maxoff > info->max_lineno_offset) info->max_lineno_offset = maxoff; } /* Read in all the line numbers for fast lookups later. Leave them in external (unswapped) format in memory; we'll swap them as we enter them into GDB's data structures. */ static int init_lineno (abfd, offset, size) bfd *abfd; long offset; int size; { int val; if (bfd_seek(abfd, offset, 0) < 0) return -1; linetab = (char *) xmalloc(size); val = bfd_read(linetab, 1, size, abfd); if (val != size) return -1; linetab_offset = offset; linetab_size = size; make_cleanup (free, linetab); /* Be sure it gets de-allocated. */ return 0; } /* dbx allows the text of a symbol name to be continued into the next symbol name! When such a continuation is encountered (a \ at the end of the text of a name) call this function to get the continuation. */ /* So far, I haven't seen this happenning xlc output. I doubt we'll need this for aixcoff. */ #undef next_symbol_text #define next_symbol_text() \ printf ("Gdb Error: symbol names on multiple lines not implemented.\n") /* xlc/dbx combination uses a set of builtin types, starting from -1. return the proper type node fora given builtin type #. */ struct type * builtin_type (pp) char **pp; { int typenums[2]; if (**pp != '-') { printf ("ERROR!, unknown built-in type!\n"); return NULL; } *pp += 1; read_type_number (pp, typenums); /* default types are defined in dbxstclass.h. */ switch ( typenums[1] ) { case 1: return lookup_fundamental_type (current_objfile, FT_INTEGER); case 2: return lookup_fundamental_type (current_objfile, FT_CHAR); case 3: return lookup_fundamental_type (current_objfile, FT_SHORT); case 4: return lookup_fundamental_type (current_objfile, FT_LONG); case 5: return lookup_fundamental_type (current_objfile, FT_UNSIGNED_CHAR); case 6: return lookup_fundamental_type (current_objfile, FT_SIGNED_CHAR); case 7: return lookup_fundamental_type (current_objfile, FT_UNSIGNED_SHORT); case 8: return lookup_fundamental_type (current_objfile, FT_UNSIGNED_INTEGER); case 9: return lookup_fundamental_type (current_objfile, FT_UNSIGNED_INTEGER); case 10: return lookup_fundamental_type (current_objfile, FT_UNSIGNED_LONG); case 11: return lookup_fundamental_type (current_objfile, FT_VOID); case 12: return lookup_fundamental_type (current_objfile, FT_FLOAT); case 13: return lookup_fundamental_type (current_objfile, FT_DBL_PREC_FLOAT); case 14: return lookup_fundamental_type (current_objfile, FT_EXT_PREC_FLOAT); case 15: /* requires a builtin `integer' */ return lookup_fundamental_type (current_objfile, FT_INTEGER); case 16: return lookup_fundamental_type (current_objfile, FT_BOOLEAN); case 17: /* requires builtin `short real' */ return lookup_fundamental_type (current_objfile, FT_FLOAT); case 18: /* requires builtin `real' */ return lookup_fundamental_type (current_objfile, FT_FLOAT); default : printf ("ERROR! Unknown builtin type -%d\n", typenums[1]); return NULL; } } #if 0 /* Seems to be unused, don't bother converting from old misc function vector usage to new minimal symbol tables. FIXME: Delete this? */ /* if we now nothing about a function but its address, make a function symbol out of it with the limited knowladge you have. This will be used when somebody refers to a function, which doesn't exist in the symbol table, but is in the minimal symbol table. */ struct symbol * build_function_symbol (ind, objfile) int ind; struct objfile *objfile; { struct symbol *sym = (struct symbol *) obstack_alloc (&objfile->symbol_obstack, sizeof (struct symbol)); SYMBOL_NAME (sym) = misc_function_vector[ind].name; /* SYMBOL_VALUE (sym) = misc_function_vector[ind].address; */ SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE; SYMBOL_CLASS (sym) = LOC_BLOCK; SYMBOL_TYPE (sym) = lookup_function_type (lookup_fundamental_type (current_objfile, FT_INTEGER)); SYMBOL_BLOCK_VALUE (sym) = (struct block *) obstack_alloc (&objfile->symbol_obstack, sizeof (struct block)); BLOCK_START (SYMBOL_BLOCK_VALUE (sym)) = misc_function_vector[ind].address; return sym; } #endif static void aixcoff_new_init (objfile) struct objfile *objfile; { } static void aixcoff_symfile_init (objfile) struct objfile *objfile; { bfd *abfd = objfile->obfd; /* Allocate struct to keep track of the symfile */ objfile -> sym_private = xmmalloc (objfile -> md, sizeof (struct coff_symfile_info)); /* * Save startup file's range of PC addresses to help * blockframe.c decide where the bottom of the stack is. */ if (bfd_get_file_flags(abfd) & EXEC_P) { entry_point = bfd_get_start_address(abfd); } else { entry_point = ~0; /* set the startup file to be an empty range. */ startup_file_start = 0; startup_file_end = 0; } } /* Perform any local cleanups required when we are done with a particular objfile. I.E, we are in the process of discarding all symbol information for an objfile, freeing up all memory held for it, and unlinking the objfile struct from the global list of known objfiles. */ static void aixcoff_symfile_finish (objfile) struct objfile *objfile; { if (objfile -> sym_private != NULL) { mfree (objfile -> md, objfile -> sym_private); } /* Start with a fresh include table for the next objfile. */ if (inclTable) { free (inclTable); inclTable = NULL; } inclIndx = inclLength = inclDepth = 0; } static int init_stringtab(abfd, offset, objfile) bfd *abfd; long offset; struct objfile *objfile; { long length; int val; unsigned char lengthbuf[4]; if (bfd_seek(abfd, offset, 0) < 0) return -1; val = bfd_read((char *)lengthbuf, 1, sizeof lengthbuf, abfd); length = bfd_h_get_32(abfd, lengthbuf); /* If no string table is needed, then the file may end immediately after the symbols. Just return with `strtbl' set to null. */ if (val != sizeof length || length < sizeof length) return 0; /* Allocate string table from symbol_obstack. We will need this table as long as we have its symbol table around. */ strtbl = (char*) obstack_alloc (&objfile->symbol_obstack, length); if (strtbl == NULL) return -1; bcopy(&length, strtbl, sizeof length); if (length == sizeof length) return 0; val = bfd_read(strtbl + sizeof length, 1, length - sizeof length, abfd); if (val != length - sizeof length || strtbl[length - 1] != '\0') return -1; return 0; } static int init_debugsection(abfd) bfd *abfd; { register sec_ptr secp; bfd_size_type length; if (debugsec) { free(debugsec); debugsec = NULL; } secp = bfd_get_section_by_name(abfd, ".debug"); if (!secp) return 0; if (!(length = bfd_section_size(abfd, secp))) return 0; debugsec = (char *) xmalloc ((unsigned)length); if (debugsec == NULL) return -1; if (!bfd_get_section_contents(abfd, secp, debugsec, (file_ptr) 0, length)) { printf ("Can't read .debug section from symbol file\n"); return -1; } return 0; } static void free_debugsection() { if (debugsec) free(debugsec); debugsec = NULL; } /* aixcoff version of symbol file read. */ static void aixcoff_symfile_read (objfile, addr, mainline) struct objfile *objfile; CORE_ADDR addr; int mainline; { int num_symbols; /* # of symbols */ int symtab_offset; /* symbol table and */ int stringtab_offset; /* string table file offsets */ int val; bfd *abfd; struct coff_symfile_info *info; char *name; info = (struct coff_symfile_info *) objfile -> sym_private; symfile_bfd = abfd = objfile->obfd; name = objfile->name; num_symbols = bfd_get_symcount (abfd); /* # of symbols */ symtab_offset = obj_sym_filepos (abfd); /* symbol table file offset */ stringtab_offset = symtab_offset + num_symbols * coff_data(abfd)->local_symesz; info->min_lineno_offset = 0; info->max_lineno_offset = 0; bfd_map_over_sections (abfd, find_linenos, info); /* FIXME! This stuff should move into symfile_init */ if (info->min_lineno_offset != 0 && info->max_lineno_offset > info->min_lineno_offset) { /* only read in the line # table if one exists */ val = init_lineno(abfd, info->min_lineno_offset, info->max_lineno_offset - info->min_lineno_offset); if (val < 0) error("\"%s\": error reading line numbers\n", name); } val = init_stringtab(abfd, stringtab_offset, objfile); if (val < 0) { error ("\"%s\": can't get string table", name); } if (init_debugsection(abfd) < 0) { error ("Error reading .debug section of `%s'\n", name); } /* Position to read the symbol table. Do not read it all at once. */ val = bfd_seek(abfd, (long)symtab_offset, 0); if (val < 0) perror_with_name(name); if (bfd_tell(abfd) != symtab_offset) fatal("bfd? BFD!"); init_minimal_symbol_collection (); make_cleanup (discard_minimal_symbols, 0); #ifdef XCOFF_INIT_LOADINFO if (mainline) XCOFF_INIT_LOADINFO (); #endif /* Now that the executable file is positioned at symbol table, process it and define symbols accordingly. */ read_xcoff_symtab(objfile, num_symbols); make_cleanup (free_debugsection, 0); /* Sort symbols alphabetically within each block. */ sort_syms (); /* Install any minimal symbols that have been collected as the current minimal symbols for this objfile. */ install_minimal_symbols (objfile); /* Make a default for file to list. */ select_source_symtab (0); } /* Register our ability to parse symbols for aixcoff BFD files. */ static struct sym_fns aixcoff_sym_fns = { "aixcoff-rs6000", /* sym_name: name or name prefix of BFD target type */ 15, /* sym_namelen: number of significant sym_name chars */ aixcoff_new_init, /* sym_new_init: init anything gbl to entire symtab */ aixcoff_symfile_init, /* sym_init: read initial info, setup for sym_read() */ aixcoff_symfile_read, /* sym_read: read a symbol file into symtab */ aixcoff_symfile_finish, /* sym_finish: finished with file, cleanup */ NULL /* next: pointer to next struct sym_fns */ }; void _initialize_xcoffread () { add_symtab_fns(&aixcoff_sym_fns); } /* In order to handle forward type references, we needed to have this old routine. Try printing the type of member `p' in the following structure in a dbx environment. struct s { ... struct s *p; }; */ #if 0 /* Smash TYPE to be a type of pointers to TO_TYPE. If TO_TYPE is not permanent and has no pointer-type yet, record TYPE as its pointer-type. */ void smash_to_pointer_type (type, to_type) struct type *type, *to_type; { int type_permanent = (TYPE_FLAGS (type) & TYPE_FLAG_PERM); bzero (type, sizeof (struct type)); TYPE_TARGET_TYPE (type) = to_type; /* We assume the machine has only one representation for pointers! */ TYPE_LENGTH (type) = sizeof (char *); TYPE_CODE (type) = TYPE_CODE_PTR; /* ??? TYPE_TARGET_TYPE and TYPE_MAIN_VARIANT are the same. You can't do this. It will break the target type!!! TYPE_MAIN_VARIANT (type) = type; */ if (type_permanent) TYPE_FLAGS (type) |= TYPE_FLAG_PERM; if (TYPE_POINTER_TYPE (to_type) == 0 && (!(TYPE_FLAGS (to_type) & TYPE_FLAG_PERM) || type_permanent)) { TYPE_POINTER_TYPE (to_type) = type; } } #endif #else /* IBM6000 */ struct type * builtin_type (pp) char **pp; { fatal ("internals eror: builtin_type called!"); } #endif /* IBM6000 */ #define DEBUG 1 #if defined (DEBUG) && defined (IBM6000) /* Needs both defined */ void dump_strtbl () { int ii; printf ("===STRING TABLE DUMP...\n\n"); for ( ii=0; ii < strtbl_len; ++ii ) printf ("%c", isprint (*(strtbl+ii)) ? *(strtbl+ii) : ' '); printf ("\n"); } void dump_linetable (ltb) struct linetable *ltb; { int ii; for (ii=0; ii < ltb->nitems; ++ii) printf ("line: %d, addr: 0x%x\n", ltb->item[ii].line, ltb->item[ii].pc); } void dump_type (typeP) struct type *typeP; { printf ("0x%x: name: %s\n", typeP, typeP->name ? typeP->name : "(nil)"); } char *dump_namespace (); char *dump_addrclass (); void dump_symbol (pp) struct symbol *pp; { printf (" sym: %s\t%s,\t%s\ttype: 0x%x, val: 0x%x end: 0x%x\n", pp->name, dump_namespace (pp->namespace), dump_addrclass (pp->class), pp->type, SYMBOL_CLASS(pp) == LOC_BLOCK ? BLOCK_START(SYMBOL_BLOCK_VALUE(pp)) : pp->value.value, SYMBOL_CLASS(pp) == LOC_BLOCK ? BLOCK_END(SYMBOL_BLOCK_VALUE(pp)) : 0); } char * dump_namespace (ns) int ns; { static char *ns_name [] = { "UNDEF_NS", "VAR_NS", "STRUCT_NS", "LABEL_NS"}; switch (ns) { case UNDEF_NAMESPACE: case VAR_NAMESPACE: case STRUCT_NAMESPACE: case LABEL_NAMESPACE: return ns_name[ns]; } return "***ERROR***"; } char * dump_addrclass (ac) int ac; /* address class */ { static char *ac_name [] = { "LOC_UNDEF", "LOC_CONST", "LOC_STATIC", "LOC_REGISTER", "LOC_ARG", "LOC_REF_ARG", "LOC_REGPARM", "LOC_LOCAL", "LOC_TYPEDEF", "LOC_LABEL", "LOC_BLOCK", "LOC_CONST_BYTES", "LOC_LOCAL_ARG", }; switch (ac) { case LOC_UNDEF: case LOC_CONST: case LOC_STATIC: case LOC_REGISTER: case LOC_ARG: case LOC_REF_ARG: case LOC_REGPARM: case LOC_LOCAL: case LOC_TYPEDEF: case LOC_LABEL: case LOC_BLOCK: case LOC_CONST_BYTES: case LOC_LOCAL_ARG: return ac_name [ac]; } return "***ERROR***"; } void dump_block (pp) struct block *pp; { int ii; printf ("BLOCK..: start: 0x%x, end: 0x%x\n", pp->startaddr, pp->endaddr); for (ii=0; ii < pp->nsyms; ++ii) dump_symbol (pp->sym[ii]); } void dump_blockvector (pp) struct blockvector *pp; { int ii; for (ii=0; ii < pp->nblocks; ++ii) dump_block (pp->block [ii]); } void dump_last_symtab (pp) struct symtab *pp; { for ( ; pp; pp = pp->next) { if ( pp->next == 0 ) { printf ("SYMTAB NAME: %s\n", pp->filename); dump_blockvector (pp->blockvector); } } } void dump_symtabs (pp) struct symtab *pp; { for ( ; pp; pp = pp->next) { printf ("SYMTAB NAME: %s\n", pp->filename ? pp->filename : "(nil)"); /* if (pp->linetable) dump_linetable (pp->linetable); */ dump_blockvector (pp->blockvector); } } void dump_symtab_lines (pp) struct symtab *pp; { for ( ; pp; pp = pp->next) { printf ("SYMTAB NAME: %s\n", pp->filename ? pp->filename : "(nil)"); if (pp->linetable) dump_linetable (pp->linetable); /* dump_blockvector (pp->blockvector); */ } } void dump_msymbols (of) struct objfile *of; { int ii; for (ii=0; ii < of->minimal_symbol_count; ++ii) printf ("name: %s, addr: 0x%x, info: 0x%x\n", of->msymbols[ii].name, of->msymbols[ii].address, of->msymbols[ii].info ); } #endif /* DEBUG */