# Copyright 1988, 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001 # Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # Please email any bugs, comments, and/or additions to this file to: # bug-gdb@prep.ai.mit.edu # Start with a fresh gdb gdb_exit gdb_start set timeout 60 # # test default actions of gdb commands # #load_lib gdb.exp gdb_test "add-symbol-file" "add-symbol-file takes a file name and an address" "add-symbol-file" setup_xfail "mips-idt-*" send_gdb "attach\n" gdb_expect { -re "Argument required .(process-id|program) to attach.*$gdb_prompt $"\ { pass "attach" } -re "You can't do that when your target is `None'.*$gdb_prompt $"\ { pass "attach" } -re "You can't do that without a process to debug.*$gdb_prompt $"\ { pass "attach" } -re "Don't know how to attach. Try \"help target\"..*$gdb_prompt $"\ { pass "attach" } -re "Kill it. .y or n." { send_gdb "y\n" exp_continue } -re "$gdb_prompt $" { fail "attach" } timeout { fail "(timeout) attach" } } # FIXME: attach kills the udi connection if { [istarget "a29k-*-udi"] } { gdb_exit gdb_start } if ![target_info exists use_gdb_stub] { gdb_test "break" "No default breakpoint address now." "break" foreach i "b br bre brea" { gdb_test $i "No default breakpoint address now." "break \"$i\" abbreviation" } setup_xfail "mips-idt-*" "a29k-*-udi" gdb_test "backtrace" "No stack." # ba and bac are no longer unique command prefixes. So these tests # elict an error from GDB. # GDB needs to be fixed to map unique alias here for ba bac. # foreach i "bt ba bac" { setup_xfail "mips-idt-*" "a29k-*-udi" gdb_test $i "No stack." "backtrace \"$i\" abbreviation" } } else { warning "Skipping backtrace and break tests because of GDB stub." } # This works on the MIPS IDT board, but confuses future tests. if ![istarget "mips-idt-*"] then { setup_xfail "a29k-*-udi" gdb_test "continue" "The program is not being run." "continue" setup_xfail "a29k-*-udi" gdb_test "c" "The program is not being run." "continue \"c\" abbreviation" } # FIXME: continue kills the udi connection if [istarget "a29k-*-udi"] then { gdb_exit gdb_start } #test call gdb_test "call" "The history is empty..*" "call" #test catch gdb_test "catch" "Catch requires an event name..*" "catch" #test cd gdb_test "cd" "Argument required .new working directory.*" "cd" #test clear gdb_test "clear" "No source file specified..*" "clear" #test commands gdb_test "commands" "No breakpoint number 0..*" "commands" #test condition gdb_test "condition" "Argument required .breakpoint number.*" "condition" #test core-file gdb_test "core-file" "No core file now.|GDB can't read core files on this machine." "core-file" #test delete "d" abbreviation gdb_test "d" "" "delete \"d\" abbreviation" #test delete gdb_test "delete" "" "delete" #test define gdb_test "define" "Argument required \[(\]name of command to define\[)\]." "define" #test delete breakpoints gdb_test "delete breakpoints" "" "delete breakpoints" #test delete display # FIXME -- need to dump full output to detailed log send_gdb "delete display\n" gdb_expect { -re "Delete all auto-display expressions.*y or n. $" { send_gdb "y\n" gdb_expect { -re "$gdb_prompt $" { pass "delete display prompt" } timeout { fail "(timeout) delete display prompt" } } } timeout { fail "(timeout) delete display prompt" } } #test detach gdb_test "detach" "" "detach" # FIXME: continue kills the udi connection if [istarget "a29k-*-udi"] then { gdb_exit gdb_start } if [istarget "h8300-*-hms"] then { gdb_exit gdb_start } #test directory # FIXME -- need to dump full output to detailed log send_gdb "directory\n" gdb_expect { -re "Reinitialize source path to empty.*y or n. $" { send_gdb "y\n" gdb_expect { -re "Source directories searched: .cdir:.cwd.*$gdb_prompt $"\ { pass "directory prompt" } timeout { fail "(timeout) directory prompt" } } } } #test disable "dis" abbreviation gdb_test "dis" "" "disable \"dis\" abbreviation" #test disable "disa" abbreviation gdb_test "disa" "" "disable \"disa\" abbreviation" #test disable gdb_test "disable" "" "disable" #test disable breakpoints gdb_test "disable breakpoints" "" "disable breakpoints" #test disable display gdb_test "disable display" "" "disable display" #test disassemble gdb_test "disassemble" "No frame selected." "disassemble" #test display gdb_test "display" "" "display" #test do gdb_test "do" "No stack." "do" #test document gdb_test "document" "Argument required .name of command to define.*" "document" #test down gdb_test "down" "No stack.*" "down" #test down-silently gdb_test "down-silently" "No stack." "down-silently" #test echo gdb_test "echo" "" "echo" #test enable breakpoints delete gdb_test "enable breakpoints delete" "Argument required .one or more breakpoint numbers.*" "enable breakpoints delete" #test enable breakpoints once gdb_test "enable breakpoints once" "Argument required .one or more breakpoint numbers.*" "enable breakpoints once" #test enable breakpoints gdb_test "enable breakpoints" "" "enable breakpoints" #test enable delete gdb_test "enable delete" "Argument required .one or more breakpoint numbers.*" "enable delete" #test enable display gdb_test "enable display" "" "enable display" #test enable once gdb_test "enable once" "Argument required .one or more breakpoint numbers.*" "enable once" #test enable gdb_test "enable" "" "enable" #test exec-file send_gdb "exec-file\n" gdb_expect { -re "No executable file now..*$gdb_prompt $" { pass "exec-file" } -re "exec-file.*A program is being debugged already. Kill it. .y or n.*$" { send_gdb "n\n" if $verbose>1 then { send_user "\tDidn't kill program being debugged\n" } gdb_expect -re "$gdb_prompt $" { } pass "exec-file" } -re "$gdb_prompt $" { fail "exec-file" } timeout { fail "(timeout) exec-file" } } #test frame "f" abbreviation setup_xfail "a29k-*-udi" gdb_test "f" "No stack." "frame \"f\" abbreviation" #test frame setup_xfail "a29k-*-udi" gdb_test "frame" "No stack." "frame" #test fg setup_xfail "a29k-*-udi" gdb_test "fg" "The program is not being run." "fg" # FIXME: fg kills the udi connection #test file send_gdb "file\n" gdb_expect { -re "No executable file now..*$gdb_prompt $"\ { pass "file" } -re ".*A program is being debugged already. Kill it. .y or n.*$" { send_gdb "n\n" if $verbose>1 then { send_user "\t\tDidn't kill program being debugged\n" } gdb_expect -re "$gdb_prompt $" { } pass "file" } -re ".*$gdb_prompt $" { fail "file" } timeout { fail "(timeout) file" } } #test finish setup_xfail "a29k-*-udi" gdb_test "finish" "The program is not running." "finish" #test forward-search # The message here comes from the regexp library, not gdb, and so can # vary on different systems. gdb_test "forward-search" "No previous regular expression.*|There is no previous regular expression.*" "forward-search" #test help "h" abbreviation gdb_test "h" "List of classes of commands:.*\[\r\n\]+aliases -- Aliases of other commands.*\[\r\n\]+breakpoints -- Making program stop at certain points.*\[\r\n\]+data -- Examining data.*\[\r\n\]+files -- Specifying and examining files.*\[\r\n\]+obscure -- Obscure features.*\[\r\n\]+running -- Running the program.*\[\r\n\]+stack -- Examining the stack.*\[\r\n\]+status -- Status inquiries.*\[\r\n\]+support -- Support facilities.*\[\r\n\]+user-defined -- User-defined commands.*\[\r\n\]+Type \"help\" followed by a class name for a list of commands in that class..*\[\r\n\]+Type \"help\" followed by command name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help \"h\" abbreviation" #test help gdb_test "help" "List of classes of commands:.*\[\r\n\]+aliases -- Aliases of other commands.*\[\r\n\]+breakpoints -- Making program stop at certain points.*\[\r\n\]+data -- Examining data.*\[\r\n\]+files -- Specifying and examining files.*\[\r\n\]+obscure -- Obscure features.*\[\r\n\]+running -- Running the program.*\[\r\n\]+stack -- Examining the stack.*\[\r\n\]+status -- Status inquiries.*\[\r\n\]+support -- Support facilities.*\[\r\n\]+user-defined -- User-defined commands.*\[\r\n\]+Type \"help\" followed by a class name for a list of commands in that class..*\[\r\n\]+Type \"help\" followed by command name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help" #test handle gdb_test "handle" "Argument required .signal to handle.*" "handle" #test info "i" abbreviation gdb_test "i" "\"info\" must be followed by the name of an info command..*\[\r\n\]+List of info subcommands:.*\[\r\n\]+Type \"help info\" followed by info subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "info \"i\" abbreviation" #test info gdb_test "info" "\"info\" must be followed by the name of an info command..*\[\r\n\]+List of info subcommands:.*\[\r\n\]+Type \"help info\" followed by info subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "info" #test ignore gdb_test "ignore" "Argument required .a breakpoint number.*" "ignore" #test info address gdb_test "info address" "Argument required." "info address" #test info all-registers setup_xfail "a29k-*-udi" gdb_test "info all-registers" "The program has no registers now." "info all-registers" #test info args gdb_test "info args" "No frame selected." "info args" #test info bogus-gdb-command gdb_test "info bogus-gdb-command" "Undefined info command: \"bogus-gdb-command\". Try \"help info\".*" "info bogus-gdb-command" #test info breakpoints gdb_test "info breakpoints" "No breakpoints or watchpoints." "info breakpoints" #test info catch gdb_test "info catch" "You can't do that without a process to debug." "info catch" #test info copying # FIXME -- doesn't work worth a shit #send_gdb "info copying" # -re "GNU GENERAL PUBLIC LICENSE.*#of preserving the free status of all derivatives of our free software and.*#of promoting the sharing and reuse of software generally."# gdb_test "info copying" # } # # #test info display gdb_test "info display" "There are no auto-display expressions now." "info display" #test info frame "f" abbreviation gdb_test "info f" "No stack.*|No selected frame.*" "info frame \"f\" abbreviation" #test info frame gdb_test "info frame" "No stack.|No selected frame." "info frame" #test info files gdb_test "info files" "" "info files" #test info float if [istarget "arm*-*-*"] then { gdb_test "info float" "Software FPU type.*mask:.*flags:.*" "info float" } elseif [istarget "thumb*-*-*"] then { gdb_test "info float" "Software FPU type.*mask:.*flags:.*" "info float" } elseif [istarget "strongarm*-*-*"] then { gdb_test "info float" "Software FPU type.*mask:.*flags:.*" "info float" } elseif [istarget "i\[3456\]86-*-*"] then { gdb_test "info float" "R7:.*Status Word:.*Opcode:.*" "info float" } else { gdb_test "info float" "No floating point info available for this processor." "info float" } #test info functions gdb_test "info functions" "All defined functions:" "info functions" #test info locals gdb_test "info locals" "No frame selected." "info locals" #test info program setup_xfail "a29k-*-udi" gdb_test "info program" "The program being debugged is not being run." "info program" #test info registers setup_xfail "a29k-*-udi" gdb_test "info registers" "The program has no registers now." "info registers" #test info stack "s" abbreviation setup_xfail "a29k-*-udi" gdb_test "info s" "No stack." "info stack \"s\" abbreviation" #test info stack setup_xfail "a29k-*-udi" gdb_test "info stack" "No stack." "info stack" #test info set # FIXME -- needs to match the entire output # FIXME -- on native solaris 2.8, this test fails due to this line: # prompt: Gdb's prompt is "(gdb) ".^M gdb_test "info set" "confirm: Whether to confirm potentially dangerous operations is o\[a-z\]*..*\[\r\n\]+history filename: The filename in which to record the command history is .*\[\r\n\]+listsize: Number of source lines gdb will list by default is 10.*" "info set" gdb_test "info symbol" "Argument required .address.." #test info source gdb_test "info source" "No current source file..*" "info source" #test info sources gdb_test "info sources" "No symbol table is loaded. Use the \"file\" command.*" "info sources" #test info target gdb_test "info target" "" "info target" #test info terminal gdb_test "info terminal" "No saved terminal information." "info terminal" #test info types gdb_test "info types" "All defined types:" "info types" #test info variables gdb_test "info variables" "All defined variables:" "info variables" #test info warranty setup_xfail "hppa*-hp-hpux*" gdb_test "info warranty" "NO WARRANTY.*\[\r\n\]+ *11. *BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY.*\[\r\n\]+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN.*\[\r\n\]+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES.*\[\r\n\]+PROVIDE THE PROGRAM \"AS IS\" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED.*\[\r\n\]+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF.*\[\r\n\]+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS.*\[\r\n\]+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE.*\[\r\n\]+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,.*\[\r\n\]+REPAIR OR CORRECTION..*\[\r\n\]+ *12. *IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING.*\[\r\n\]+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR.*\[\r\n\]+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,.*\[\r\n\]+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING.*\[\r\n\]+OUT OF THE USE OR INABILITY TO USE THE PROGRAM .INCLUDING BUT NOT LIMITED.*\[\r\n\]+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY.*\[\r\n\]+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER.*\[\r\n\]+PROGRAMS., EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE.*\[\r\n\]+POSSIBILITY OF SUCH DAMAGES.*" "info warranty" #test info watchpoints gdb_test "info watchpoints" "No breakpoints or watchpoints." "info watchpoints" #test inspect gdb_test "inspect" "The history is empty." "inspect" #test jump setup_xfail "a29k-*-udi" gdb_test "jump" "The program is not being run." "jump" #test kill gdb_test "kill" "The program is not being run." "kill" #test list "l" abbreviation gdb_test "l" "No symbol table is loaded. Use the \"file\" command.*" "list \"l\" abbreviation" #test list gdb_test "list" "No symbol table is loaded. Use the \"file\" command.*" "list" #test load # The ``takes a file name'' case is for vxgdb. # The ``Use the "file" command'' case is for newer GDB versions which try # to deduce the filename from the exec file. gdb_test "load" "You can't do that when your target is `None'.*|The load command takes a file name.*|Must specify at least a file name with the load command.*|.*Use the .file. or .exec-file. command.*" "load" #test next "n" abbreviation setup_xfail "a29k-*-udi" gdb_test "n" "The program is not being run." "next \"n\" abbreviation" #test next setup_xfail "a29k-*-udi" gdb_test "next" "The program is not being run." "next" #test nexti "ni" abbreviation setup_xfail "a29k-*-udi" gdb_test "ni" "The program is not being run." "nexti \"ni\" abbreviation" #test nexti setup_xfail "a29k-*-udi" gdb_test "nexti" "The program is not being run." "nexti" #test output gdb_test "output" "Argument required .expression to compute.*" "output" #test overlay gdb_test "overlay" "\"overlay\" must be followed by the name of .*" #test a non-existant overlay subcommand gdb_test "overlay on" "Undefined overlay command.* Try \"help overlay\"." gdb_test "overlay manual" "" "overlay manual #1" gdb_test "overlay auto" "" gdb_test "overlay off" "" gdb_test "overlay list" "No sections are mapped." gdb_test "overlay map" "Overlay debugging not enabled.*" "overlay map #1" gdb_test "overlay unmap" "Overlay debugging not enabled.*" "overlay unmap #1" gdb_test "overlay manual" "" "overlay manual #2" gdb_test "overlay map" "Argument required: name of an overlay section." "overlay map #2" gdb_test "overlay unmap" "Argument required: name of an overlay section." "overlay unmap #2" #test print "p" abbreviation gdb_test "p" "The history is empty." "print \"p\" abbreviation" #test print gdb_test "print" "The history is empty." "print" #test printf gdb_test "printf" "Argument required .format-control string and values to print.*" "printf" #test ptype gdb_test "ptype" "The history is empty." "ptype" #test pwd gdb_test "pwd" "Working directory .*" "pwd" #test run "r" abbreviation if [istarget "*-*-vxworks*"] then { gdb_test "set args" "" "" gdb_test "r" "Starting program: .* You must specify a function name to run, and arguments if any"\ "run \"r\" abbreviation" gdb_test "set args main" "" "" } else { send_gdb "r\n" gdb_expect { -re "Starting program: .* You can't do that when your target is `None'.*$gdb_prompt $"\ { pass "run \"r\" abbreviation" } -re "Starting program: .* No executable file specified.* Use the \"file\" or \"exec-file\" command.*$gdb_prompt $"\ { pass "run \"r\" abbreviation" } -re "Starting program: .* No image loaded into target.*$gdb_prompt $"\ { pass "run \"r\" abbreviation" } -re "Starting program: .* No program loaded.*$gdb_prompt $"\ { pass "run \"r\" abbreviation" } -re "Don't know how to run. Try \"help target\"..*$gdb_prompt $"\ { pass "run \"r\" abbreviation" } -re ".*$gdb_prompt $" { fail "run \"r\" abbreviation" } timeout { fail "(timeout) run \"r\" abbreviation" } } } #test run if [istarget "*-*-vxworks*"] then { gdb_test "set args" "" "" gdb_test "run" "Starting program: .* You must specify a function name to run, and arguments if any" gdb_test "set args main" "" "" } else { send_gdb "run\n" gdb_expect { -re "Starting program:.*You can't do that when your target is `None'.*$gdb_prompt $" { pass "run" } -re "Starting program: .* No executable file specified.* Use the \"file\" or \"exec-file\" command.*$gdb_prompt $"\ { pass "run" } -re "Starting program: .* No image loaded into target.*$gdb_prompt $"\ { pass "run" } -re "Starting program: .* No program loaded.*$gdb_prompt $"\ { pass "run \"r\" abbreviation" } -re "Don't know how to run. Try \"help target\"..*$gdb_prompt $"\ { pass "run" } -re ".*$gdb_prompt $" { fail "run" } timeout { fail "(timeout) run" } } } #test rbreak gdb_test "rbreak" "" "rbreak" #test return # The middle case accommodates the a29k, where doing the "ni" above causes # an initial stack to be created. gdb_test "return" "No selected frame..*" "return" "Make .* return now.*y or n. $" "y" #test reverse-search gdb_test "reverse-search" "No previous regular expression.*|There is no previous regular expression.*" "reverse-search" #test step "s" abbreviation setup_xfail "a29k-*-udi" gdb_test "s" "The program is not being run." "step \"s\" abbreviation #1" #test step setup_xfail "a29k-*-udi" gdb_test "step" "The program is not being run." "step #1" #test search gdb_test "search" "No previous regular expression.*|There is no previous regular expression.*" "search" #test section gdb_test "section" "Must specify section name and its virtual address.*" "section" #test set annotate gdb_test "set annotate" "Argument required .integer to set it to.*" "set annotate" #test set args gdb_test "set args" "" "set args" #test set check "c" abbreviation gdb_test "set c" "\"set check\" must be followed by the name of a check subcommand..*\[\r\n\]+List of set check subcommands:.*\[\r\n\]+set check range -- Set range checking.*\[\r\n\]+set check type -- Set type checking.*\[\r\n\]+Type \"help set check\" followed by set check subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set check \"c\" abbreviation" #test set check "ch" abbreviation gdb_test "set ch" "\"set check\" must be followed by the name of a check subcommand..*\[\r\n\]+List of set check subcommands:.*\[\r\n\]+set check range -- Set range checking.*\[\r\n\]+set check type -- Set type checking.*\[\r\n\]+Type \"help set check\" followed by set check subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set check \"ch\" abbreviation" #test set check gdb_test "set check" "\"set check\" must be followed by the name of a check subcommand..*\[\r\n\]+List of set check subcommands:.*\[\r\n\]+set check range -- Set range checking.*\[\r\n\]+set check type -- Set type checking.*\[\r\n\]+Type \"help set check\" followed by set check subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set check" #test set check range gdb_test "set check range" "" "set check range" #test set check type gdb_test "set check type" "" "set check type" #test set complaints gdb_test "set complaints" "Argument required .integer to set it to.*" "set complaints" #test set confirm gdb_test "set confirm" "" "set confirm" # Don't test set editing. What if we're talking to a gdb that # won't do editing correctly while we're talking to it? # gdb_test "set editing" "" "set editing" #test set environment gdb_test "set environment" "Argument required .environment variable and value.*" "set environment" #test set height gdb_test "set height" "Argument required .integer to set it to.*" "set height" #test set history expansion gdb_test "set history expansion" "" "set history expansion" #test set history filename gdb_test "set history filename" "Argument required .filename to set it to.*" "set history filename" #test set history save gdb_test "set history save" "" "set history save" #test set history size gdb_test "set history size" "Argument required .integer to set it to.*" "set history size" #test set history gdb_test "set history" "\"set history\" must be followed by the name of a history subcommand..*\[\r\n\]+List of set history subcommands:.*\[\r\n\]+set history expansion -- Set history expansion on command input.*\[\r\n\]+set history filename -- Set the filename in which to record the command history.*\[\r\n\]+set history save -- Set saving of the history record on exit.*\[\r\n\]+set history size -- Set the size of the command history.*\[\r\n\]+Type \"help set history\" followed by set history subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set history" #test set language gdb_test "set language" "The currently understood settings are:.*\[\r\n\]+local or auto *Automatic setting based on source file.*\[\r\n\]+c *Use the C language.*\[\r\n\]+c\[+\]+ *Use the C\[+\]+ language.*\[\r\n\]+modula-2 *Use the Modula-2 language.*" "set language" #test set listsize gdb_test "set listsize" "Argument required .integer to set it to.*" "set listsize" #test set print "p" abbreviation gdb_test "set p" "\"set print\" must be followed by the name of a print subcommand..*\[\r\n\]+List of set print subcommands:.*\[\r\n\]+Type \"help set print\" followed by set print subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set print \"p\" abbreviation" #test set print "pr" abbreviation gdb_test "set pr" "\"set print\" must be followed by the name of a print subcommand..*\[\r\n\]+List of set print subcommands:.*\[\r\n\]+Type \"help set print\" followed by set print subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set print \"pr\" abbreviation" #test set print gdb_test "set print" "\"set print\" must be followed by the name of a print subcommand..*\[\r\n\]+List of set print subcommands:.*\[\r\n\]+Type \"help set print\" followed by set print subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set print" #test set print address gdb_test "set print address" "" "set print address" #test set print array gdb_test "set print array" "" "set print array" #test set print asm-demangle gdb_test "set print asm-demangle" "" "set print asm-demangle" #test set print demangle gdb_test "set print demangle" "" "set print demangle" #test set print elements gdb_test "set print elements" "Argument required .integer to set it to.*" "set print elements" #test set print object gdb_test "set print object" "" "set print object" #test set print pretty gdb_test "set print pretty" "" "set print pretty" #test set print sevenbit-strings gdb_test "set print sevenbit-strings" "" "set print sevenbit-strings" #test set print union gdb_test "set print union" "" "set print union" #test set print vtbl gdb_test "set print vtbl" "" "set print vtbl" # FIXME -- need a test for "set prompt" #test set radix gdb_test "set radix" "Input and output radices now set to decimal 10, hex a, octal 12.*" "set radix" #test set symbol-reloading gdb_test "set symbol-reloading" "" "set symbol-reloading" #test set variable gdb_test "set variable" "Argument required .expression to compute.*" "set variable" #test set verbose gdb_test "set verbose" "" "set verbose" #test set width gdb_test "set width" "Argument required .integer to set it to.*" "set width" #test set write # This is only supported on targets which use exec.o. gdb_test "set write" "" "set write" #test set gdb_test "set" "Argument required .expression to compute.*" "set" #test shell echo Hi dad! gdb_test "shell echo Hi dad!" "Hi dad!" "shell echo Hi dad!" #test show annotate gdb_test "show annotate" "Annotation_level is 0." "show annotate" #test show args gdb_test "show args" "Argument list to give program being debugged when it is started is \"\"." "show args" #test show check "c" abbreviation gdb_test "show c" "range: *Range checking is \"auto; currently off\"..*\[\r\n\]+type: *Type checking is \"auto; currently off\".*" "show check \"c\" abbreviation" #test show check "ch" abbreviation gdb_test "show ch" "range: *Range checking is \"auto; currently off\"..*\[\r\n\]+type: *Type checking is \"auto; currently off\"." "show check \"ch\" abbreviation" #test show check gdb_test "show check" "range: *Range checking is \"auto; currently off\"..*\[\r\n\]+type: *Type checking is \"auto; currently off\"." "show check" #test show check range gdb_test "show check range" "Range checking is \"auto; currently off\"." "show check range" #test show check type gdb_test "show check type" "Type checking is \"auto; currently off\"." "show check type" #test show commands gdb_test "show commands" "" "show commands" #test show complaints gdb_test "show complaints" "Max number of complaints about incorrect symbols is 0." "show complaints" #test show confirm gdb_test "show confirm" "Whether to confirm potentially dangerous operations is o\[a-z\]*." "show confirm" #test show convenience gdb_test "show convenience" "No debugger convenience variables now defined..*\[\r\n\]+Convenience variables have names starting with \".\";.*\[\r\n\]+use \"set\" as in \"set .foo = 5\" to define them." "show convenience" #test show directories gdb_test "show directories" "Source directories searched: .cdir:.cwd" "show directories" #test show editing gdb_test "show editing" "Editing of command lines as they are typed is o\[a-z\]*." "show editing" #test show height gdb_test "show height" "Number of lines gdb thinks are in a page is.*" "show height" #test show history expansion gdb_test "show history expansion" "History expansion on command input is o\[a-z\]*.*" "show history expansion" #test show history filename gdb_test "show history filename" "The filename in which to record the command history is.*.gdb_history.*" "show history filename" #test show history save gdb_test "show history save" "Saving of the history record on exit is on." "show history save" #test show history size gdb_test "show history size" "The size of the command history is.*" "show history size" #test show history gdb_test "show history" "expansion: *History expansion on command input is o.*\[\r\n\]+filename: *The filename in which to record the command history is.*.gdb_history.*\[\r\n\]+save: *Saving of the history record on exit is o.*\[\r\n\]+size: * The size of the command history is.*" "show history" #test show language gdb_test "show language" "The current source language is \"auto; currently c\"." "show language" #test show listsize gdb_test "show listsize" "Number of source lines gdb will list by default is 10." "show listsize" #test show print "p" abbreviation gdb_test "show p" ".*" "show p" #test show print "pr" abbreviation gdb_test "show pr" ".*" "show pr" #test show print gdb_test "show print" "" "show print" #test show paths gdb_test "show paths" "Executable and object file path:.*" "show paths" #test show print address gdb_test "show print address" "Printing of addresses is on." "show print address" #test show print array gdb_test "show print array" "Prettyprinting of arrays is on." "show print array" #test show print asm-demangle gdb_test "show print asm-demangle" "Demangling of C\[+\]+ names in disassembly listings is on." "show print asm-demangle" #test show print demangle gdb_test "show print demangle" "Demangling of encoded C\[+\]+ names when displaying symbols is on." "show print demangle" #test show print elements gdb_test "show print elements" "Limit on string chars or array elements to print is 200." "show print elements" #test show print object gdb_test "show print object" "Printing of object's derived type based on vtable info is on." "show print object" #test show print pretty gdb_test "show print pretty" "Prettyprinting of structures is on." "show print pretty" #test show print sevenbit-strings gdb_test "show print sevenbit-strings" "Printing of 8-bit characters in strings as .nnn is on." "show print sevenbit-strings" #test show print union gdb_test "show print union" "Printing of unions interior to structures is on." "show print union" #test show print vtbl gdb_test "show print vtbl" "Printing of C\[+\]+ virtual function tables is on." "show print vtbl" #test show prompt # In the FAIL case, can't just look for $gdb_prompt because that will match # the output, rather than the prompt. So look for $gdb_prompt at the start # of a line. gdb_test "show prompt" "Gdb's prompt is \"$gdb_prompt \".*" "show prompt" #test show radix gdb_test "show radix" "Input and output radices set to decimal 10, hex a, octal 12." "show radix" #test show symbol-reloading gdb_test "show symbol-reloading" "Dynamic symbol table reloading multiple times in one run is on." "show symbol-reloading" #test show user gdb_test "show user" "" "show user" #test show values gdb_test "show values" "" "show values" #test show verbose gdb_test "show verbose" "Verbose printing of informational messages is o.*|Verbosity is off.*" "show verbose" #test show version setup_xfail "hppa*-hp-hpux*" gdb_test "show version" "GNU gdb \[0-9\.\]*.*\[\r\n\]+Copyright \[0-9\]* Free Software Foundation, Inc.*\[\r\n\]+GDB is free software, covered by the GNU General Public License, and you are.*\[\r\n\]+welcome to change it and/or distribute copies of it under certain conditions.*\[\r\n\]+Type \"show copying\" to see the conditions.*\[\r\n\]+There is absolutely no warranty for GDB. Type \"show warranty\" for details.*\[\r\n\]+This GDB was configured as .*|GDB is free software and you are welcome to distribute copies of it.*\[\r\n\]+ under certain conditions; type \"show copying\" to see the conditions..*\[\r\n\]+There is absolutely no warranty for GDB; type \"show warranty\" for details..*\[\r\n\]+GDB.*Copyright \[0-9\]* Free Software Foundation, Inc.*" "show version" #test show width gdb_test "show width" "Number of characters gdb thinks are in a line is.*" "show width" #test show write # This is only supported on targets which use exec.o. gdb_test "show write" "Writing into executable and core files is o.*" "show write" #test show gdb_test "show" "confirm: *Whether to confirm potentially dangerous operations is on..*\[\r\n\]+history filename: *The filename in which to record the command history is .*\[\r\n\]+history save: *Saving of the history record on exit is on..*\[\r\n\]+history size: *The size of the command history is.*\[\r\n\]+listsize: *Number of source lines gdb will list by default is 10.*\[\r\n\]+print elements: *Limit on string chars or array elements to print is 200..*" "show" #test stepi "si" abbreviation setup_xfail "a29k-*-udi" gdb_test "si" "The program is not being run." "stepi \"si\" abbreviation" #test stepi setup_xfail "a29k-*-udi" gdb_test "stepi" "The program is not being run." "stepi" #test signal setup_xfail "a29k-*-udi" gdb_test "signal" "The program is not being run." "signal" #test source gdb_test "source" "source command requires pathname of file to source..*|No such file or directory.*" "source" #test step "s" abbreviation setup_xfail "a29k-*-udi" gdb_test "s" "The program is not being run." "step \"s\" abbreviation #2" #test step setup_xfail "a29k-*-udi" gdb_test "step" "The program is not being run." "step #2" #test symbol-file gdb_test "symbol-file" "" "symbol-file" #test target child gdb_test "target child" "Use the \"run\" command to start a Unix child process.*|Undefined target command: \"child\". *Try \"help target\".*" "target child" #test target procfs gdb_test "target procfs" "Use the \"run\" command to start a Unix child process.*|Undefined target command: \"procfs\". *Try \"help target\".*" "target procfs" #test target core send_gdb "target core\n" gdb_expect { -re "No core file specified..*$gdb_prompt $" { pass "target core" } -re ".*A program is being debugged already. Kill it. .y or n.*$" { send_gdb "n\n" if $verbose>1 then { send_user "\t\tDidn't kill program being debugged\n" } gdb_expect -re "$gdb_prompt $" { } pass "target core" } -re "Undefined target command: \"core\". Try \"help target\"..*$gdb_prompt $" { pass "target core" } -re ".*$gdb_prompt $" { fail "target core" } timeout { fail "(timeout) target core" } } #test target exec send_gdb "target exec\n" gdb_expect { -re "No executable file now..*$gdb_prompt $"\ { pass "target exec" } -re ".*A program is being debugged already. Kill it. .y or n.*$" { send_gdb "n\n" if $verbose>1 then { send_user "\t\tDidn't kill program being debugged\n" } gdb_expect -re "$gdb_prompt $" { } pass "target exec" } -re ".*$gdb_prompt $" { fail "target exec" } timeout { fail "(timeout) target exec" } } #test target remote if ![istarget "*-*-udi*"] then { send_gdb "target remote\n" gdb_expect { -re "To open a remote debug connection, you need to specify what.*serial.*device is attached to the remote system.*.e.g. .*$gdb_prompt $"\ { pass "target remote" } -re ".*A program is being debugged already. Kill it. .y or n.*$" { send_gdb "n\n" if $verbose>1 then { send_user "\t\tDidn't kill program being debugged\n" } gdb_expect -re "$gdb_prompt $" { } pass "target remote" } -re ".*$gdb_prompt $" { fail "target remote" } timeout { fail "(timeout) target remote" } } } #test target gdb_test "target" "Argument required .target name.*" "target" #test tbreak gdb_test "tbreak" "No default breakpoint address now." "tbreak" #test tty gdb_test "tty" "Argument required .terminal name for running target process.*" "tty" #test until "u" abbreviation setup_xfail "a29k-*-udi" gdb_test "u" "The program is not running." "until \"u\" abbreviation" #test until setup_xfail "a29k-*-udi" gdb_test "until" "The program is not running." "until" #test undisplay # FIXME -- need to dump full output to detailed log send_gdb "undisplay\n" gdb_expect { -re "Delete all auto-display expressions.*y or n. $" { send_gdb "y\n" gdb_expect { -re "$gdb_prompt $" { pass "undisplay prompt" } timeout { fail "(timeout) (timeout) undisplay prompt" } } } timeout { fail "(timeout) (timeout) undisplay prompt" } } #test unset environment send_gdb "unset environment\n" gdb_expect { -re "Delete all environment variables?.*y or n. $" { send_gdb "y\n" gdb_expect { -re "$gdb_prompt $" { pass "unset environmentprompt" } timeout { fail "(timeout) (timeout) unset environment prompt" } } } timeout { fail "(timeout) (timeout) unset environment prompt" } } #test unset gdb_test "unset" "\"unset\" must be followed by the name of an unset subcommand..*\[\r\n\]+List of unset subcommands:.*\[\r\n\]+unset environment -- Cancel environment variable VAR for the program.*\[\r\n\]+Type \"help unset\" followed by unset subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "unset" #test up #test up-silently gdb_test "up-silently" "No stack." "up-silently" #test watch gdb_test "watch" "Argument required .expression to compute.*" "watch" #test whatis gdb_test "whatis" "The history is empty." "whatis" #test where setup_xfail "a29k-*-udi" gdb_test "where" "No stack." "where" #test x #The case in which it prints a number is for vxgdb. send_gdb "x\n" gdb_expect { -re "0x0:.*Cannot access memory at address 0x0..*$gdb_prompt $" { pass "x" } -re "0x0:.*Error accessing memory address 0x0:.*$gdb_prompt $" { pass "x" } -re ".*$gdb_prompt $" { fail "x" } timeout { fail "(timeout) x" } } gdb_exit