2015-08-07 Pedro Alves * gdb.threads/step-over-lands-on-breakpoint.c (wait_threads): Delete function. (main): Add alarm. Run an infinite loop instead of calling wait_threads. * gdb.threads/step-over-lands-on-breakpoint.exp (do_test): Change comment. * gdb.threads/step-over-trips-on-watchpoint.c (wait_threads): Delete function. (main): Add alarm. Run an infinite loop instead of calling wait_threads. * gdb.threads/step-over-trips-on-watchpoint.exp (do_test): Change comment. 2015-08-07 Pedro Alves * gdb.base/checkpoint-ns.exp: New file. * gdb.base/checkpoint.exp: Pass explicit "checkpoint.c" to standard_testfile. 2015-08-07 Markus Metzger * lib/gdb.exp (skip_tsx_tests, skip_btrace_pt_tests): New. * gdb.btrace/instruction_history.exp: Update. * gdb.btrace/tsx.exp: New. * gdb.btrace/tsx.c: New. 2015-08-06 Pedro Alves * gdb.reverse/step-precsave.exp: Use with_timeout_factor to increase timeout. * gdb.reverse/until-precsave.exp: Bump timeouts. 2015-08-06 Pedro Alves * gdb.base/valgrind-infcall.exp: Issue a "disconnect". 2015-08-06 Pedro Alves PR gdb/18749 * gdb.threads/process-dies-while-handling-bp.c: New file. * gdb.threads/process-dies-while-handling-bp.exp: New file. 2015-08-06 Pedro Alves * gdb.threads/forking-threads-plus-breakpoint.exp: New file. * gdb.threads/forking-threads-plus-breakpoint.c: New file. 2015-08-05 Pedro Alves * gdb.threads/next-while-other-thread-longjmps.c: New file. * gdb.threads/next-while-other-thread-longjmps.exp: New file. 2015-08-03 Sandra Loosemore * gdb.base/bp-permanent.exp: Report test as unsupported if the target cannot stop at the permanent breakpoint. 2015-08-03 Doug Evans * gdb.perf/single-step.exp (SINGLE_STEP_COUNT): Change to 1000 from 10000. 2015-08-03 Doug Evans * Makefile.in (workers/%.worker, build-perf): New rule. (GDB_PERFTEST_MODE): New variable. (check-perf): Use it. (clean): Clean up gdb.perf parallel build subdirs. * lib/build-piece.exp: New file. * lib/gdb.exp (make_gdb_parallel_path): New function (standard_output_file, standard_temp_file): Call it. (GDB_PARALLEL handling): Make outputs,temp,cache directories as subdirs of $GDB_PARALLEL. * lib/cache.exp (gdb_do_cache): Call make_gdb_parallel_path. 2015-08-03 Doug Evans * gdb.perf/lib/perftest/reporter.py (SUM_FILE_NAME): New global. (LOG_FILE_NAME): New global. (TextReporter.__init__): Initialize self.txt_sum. (TextReporter.report): Add support for multiple data-points. Move report to perftest.sum, put raw data in perftest.log. (TextReporter.start): Open sum and log files. (TextReporter.end): Close sum and log files. * gdb.perf/lib/perftest/testresult.py (SingleStatisticTestResult.record): Handle multiple data-points. 2015-07-31 Pedro Alves * gdb.base/attach-pie-misread.exp: Rename $res to $test_spawn_id. Use spawn_id_get_pid. Wait for spawn id after eof. Use kill_wait_spawned_process instead of explicit "kill -9". * gdb.base/attach-pie-noexec.exp: Adjust to spawn_wait_for_attach returning a spawn id instead of a pid. Use spawn_id_get_pid and kill_wait_spawned_process. * gdb.base/attach-twice.exp: Likewise. * gdb.base/attach.exp: Likewise. (do_command_attach_tests): Use gdb_spawn_with_cmdline_opts and gdb_test_multiple. * gdb.base/solib-overlap.exp: Adjust to spawn_wait_for_attach returning a spawn id instead of a pid. Use spawn_id_get_pid and kill_wait_spawned_process. * gdb.base/valgrind-infcall.exp: Likewise. * gdb.multi/multi-attach.exp: Likewise. * gdb.python/py-prompt.exp: Likewise. * gdb.python/py-sync-interp.exp: Likewise. * gdb.server/ext-attach.exp: Likewise. * gdb.threads/attach-into-signal.exp (corefunc): Use spawn_wait_for_attach, spawn_id_get_pid and kill_wait_spawned_process. * gdb.threads/attach-many-short-lived-threads.exp: Adjust to spawn_wait_for_attach returning a spawn id instead of a pid. Use spawn_id_get_pid and kill_wait_spawned_process. * gdb.threads/attach-stopped.exp (corefunc): Use spawn_wait_for_attach, spawn_id_get_pid and kill_wait_spawned_process. * gdb.base/break-interp.exp: Rename $res to $test_spawn_id. Use spawn_id_get_pid. Wait for spawn id after eof. Use kill_wait_spawned_process instead of explicit "kill -9". * lib/gdb.exp (can_spawn_for_attach): Adjust comment. (kill_wait_spawned_process, spawn_id_get_pid): New procedures. (spawn_wait_for_attach): Use spawn instead of exec to spawn processes. Don't map cygwin/windows pids here. Now returns a spawn id list. 2015-07-30 Sandra Loosemore * gdb.cp/var-tag.exp (do_global_tests): Revert broken commit 4bc4d42859e3b42c79c89295ef39944bdb3e6753 and apply the correct patch. 2015-07-30 Sandra Loosemore * gdb.arch/ppc64-symtab-cordic.exp: Restrict to ppc64 targets. 2015-07-30 Sandra Loosemore Reapply: 2014-05-21 Mark Wielaard * gdb.cp/var-tag.exp (do_global_tests): Handle underlying type. 2015-07-30 Pedro Alves * linux-low.c (handle_extended_wait): Set the child's last reported status to TARGET_WAITKIND_STOPPED. 2015-07-30 Pedro Alves PR threads/18600 * gdb.threads/fork-plus-threads.exp: Test that "info inferiors" only shows inferior 1. 2015-07-30 Simon Marchi Pedro Alves PR threads/18600 * gdb.threads/fork-plus-threads.c: New file. * gdb.threads/fork-plus-threads.exp: New file. 2015-07-29 Patrick Palka * gdb.base/batch-preserve-term-settings.exp (test_terminal_settings_preserved_after_cli_exit): Use send_quit_command. 2015-07-29 Pedro Alves Don Breazeal * gdb.base/multi-forks.exp (continue_to_exit_bp_loc): Expect output from both inferior_spawn_id and gdb_spawn_id. 2015-07-29 Sergio Durigan Junior * gdb.threads/attach-into-signal.exp (corefunc): Use with_test_prefix on nested loops, uniquefying the test messages. 2015-07-29 Sergio Durigan Junior * gdb.python/py-objfile.exp: Fix typo that snuck in from my last commit. 2015-07-29 Patrick Palka * gdb.base/batch-preserve-term-settings.exp (send_quit_command): New proc. (test_terminal_settings_preserved_after_sigterm): New test. 2015-07-29 Patrick Palka * gdb.base/batch-preserve-term-settings.exp (test_terminal_settings_preserved_after_cli_exit): New test. 2015-07-29 Patrick Palka * gdb.base/batch-preserve-term-settings.exp: Remove top-level manipulation of saved_gdbflags. (test_terminal_settings_preserved): Remove global declaration of the unused variable pagination_prompt. Remove manipulation of saved_gdbflags. Use a local variable EXTRA_GDBFLAGS instead of GDBFLAGS. 2015-07-29 Pedro Alves * boards/gdbserver-base.exp: Don't set gdb,noinferiorio. 2015-07-29 Pedro Alves * gdb.base/interrupt.exp: Revert back to checking gdb,noinferiorio at the top. 2015-07-29 Pedro Alves * gdb.base/call-ar-st.c: Include "../lib/unbuffer_output.c". (main): Call gdb_unbuffer_output. * gdb.base/call-rt-st.c: Include "../lib/unbuffer_output.c". (main): Call gdb_unbuffer_output. * gdb.base/call-strs.c: Include "../lib/unbuffer_output.c". (main): Call gdb_unbuffer_output. * gdb.base/call-strs.exp: Adjust to step over the gdb_unbuffer_output call. * gdb.base/catch-gdb-caused-signals.c: Include "../lib/unbuffer_output.c". (main): Call gdb_unbuffer_output. * gdb.base/dprintf.c: Include "../lib/unbuffer_output.c". (main): Call gdb_unbuffer_output. * gdb.base/ending-run.c: Include "../lib/unbuffer_output.c". (main): Call gdb_unbuffer_output. * gdb.base/run.c: Include "../lib/unbuffer_output.c". (main): Call gdb_unbuffer_output. * gdb.base/shlib-call.exp: Adjust to step over the gdb_unbuffer_output call. * gdb.base/shmain.c: Include "../lib/unbuffer_output.c". (main): Call gdb_unbuffer_output. * gdb.base/sizeof.c: Include "../lib/unbuffer_output.c". (main): Call gdb_unbuffer_output. * gdb.base/varargs.c: Include "../lib/unbuffer_output.c". (main): Rename to ... (test): ... this. (main): Reimplement. * gdb.base/varargs.exp: Run to test instead of to main. * gdb.mi/mi-dprintf.c: Include "../lib/unbuffer_output.c". (main): Call gdb_unbuffer_output. 2015-07-29 Pedro Alves * gdb.mi/mi-dprintf.exp (mi_expect_dprintf): New procedure, factore out from mi_continue_dprintf. For call-style dprintfs, expect dprintf output out of $inferior_spawn_id. (mi_continue_dprintf): Use mi_expect_dprintf. * gdb.mi/mi-dprintf.c: Include "../lib/unbuffer_output.c". (main): Call gdb_unbuffer_output. 2015-07-29 Pedro Alves * lib/mi-support.exp (mi_inferior_spawn_id): Delete. (default_mi_gdb_start): Set inferior_spawn_id instead of mi_inferior_spawn_id. If $inferior_spawn_id is not set, set it to gdb_spawn_id. (mi_gdb_test): Always expect inferior output from both $inferior_spawn_id and $gdb_spawn_id. 2015-07-29 Pedro Alves * gdb.gdb/selftest.exp (test_with_self): Update comment. Use send_inferior and $inferior_spawn_id. 2015-07-29 Pedro Alves * gdb.gdb/complaints.exp (test_initial_complaints) (test_serial_complaints, test_short_complaints): Use gdb_test_stdio. (test_empty_complaint): Handle $inferior_spawn_id != $gdb_spawn_id. 2015-07-29 Pedro Alves * gdb.base/varargs.exp: Use gdb_test_stdio. 2015-07-29 Pedro Alves * gdb.base/shlib-call.exp: Use gdb_test_stdio. 2015-07-29 Pedro Alves * gdb.base/ending-run.exp: Use gdb_test_stdio. 2015-07-29 Pedro Alves * gdb.base/call-rt-st.exp (print_struct_call): Split "result" parameter into two new parameters, "inf_result" and "gdb_result". Expect inferior output and gdb output from $inferior_spawn_id and $gdb_spawn_id, respectively. Adjust all callers. 2015-07-29 Pedro Alves * gdb.base/call-ar-st.exp: Use gdb_test_stdio+multi_line instead of gdb_test_sequence. 2015-07-29 Pedro Alves * gdb.base/a2-run.exp (saw_usage, saw_exit_wrapper) (saw_spurious_output): Expect inferior output from $inferior_spawn_id. Use gdb_test_stdio. 2015-07-29 Pedro Alves * gdb.base/dprintf.exp: Use standard_testfile. Change prepare_for_testing call. (srcfile): Don't set. (restart): New procedure. (test_dprintf): New procecure, use to continue over dprintfs. (test_call, test_agent): New procedures, tests moved here. Restart gdb and recreate dprintfs. Adjust expected output. 2015-07-29 Pedro Alves * gdb.base/catch-gdb-caused-signals.exp: Use gdb_test_stdio. 2015-07-29 Pedro Alves * gdb.base/call-strs.exp: Use gdb_test_stdio instead of gdb_test. 2015-07-29 Pedro Alves * gdb.base/sizeof.exp (check_sizeof, check_valueof): Use gdb_test_stdio. 2015-07-29 Pedro Alves * lib/gdb.exp (gdb_test_stdio): New procedure. 2015-07-29 Pedro Alves * gdb.base/restore.exp (restore_tests): Use gdb_continue_to_end. 2015-07-29 Pedro Alves * gdb.base/call-signal-resume.exp: Remove check for gdb,noinferiorio. Don't expect "no signal". Use gdb_test. * gdb.base/unwindonsignal.exp: Likewise. * gdb.base/call-signals.c (gen_signal): Remove printf call. * gdb.base/unwindonsignal.c (gen_signal): Likewise. 2015-07-29 Pedro Alves * gdb.base/siginfo-addr.c (pass): New function. (handler): Call it iff si_addr is correct. * gdb.base/siginfo-addr.exp: Remove gdb_skip_stdio_test check. Set a breakpoint at "pass" and continue to it. 2015-07-28 Sergio Durigan Junior * gdb.python/py-objfile.exp: Make some tests have unique names. * gdb.python/py-pp-registration.exp: Likewise. 2015-07-28 Pedro Alves * gdb.server/server-exec-info.exp: Issue a "disconnect". 2015-07-27 Simon Marchi * gdb.mi/mi-pending.c (thread_func): Replace return with return NULL. 2015-07-27 Simon Marchi * gdb.mi/mi-watch.exp (test_watchpoint_triggering): Remove xfail. 2015-07-27 Patrick Palka * gdb.base/gdb-sigterm-2.exp: New test. 2015-07-25 Doug Evans Revert: * Makefile.in (check/%.exp): Pass directory for GDB_PARALLEL. (workers/%.worker, build-perf): New rule. (GDB_PERFTEST_MODE): New variable. (check-perf): Use it. (clean): Clean up gdb.perf parallel build subdirs. * lib/build-piece.exp: New file. * lib/cache.exp (gdb_do_cache): Include $GDB_PARALLEL in path name. * lib/gdb.exp (standard_output_file): Include $GDB_PARALLEL in path name. (standard_temp_file): Ditto. (GDB_PARALLEL handling): Make outputs,temp,cache directories as subdirs of $GDB_PARALLEL. 2015-07-24 Doug Evans * gdb.perf/lib/perftest/utils.py: New file. * gdb.perf/gm-hello.cc: New file. * gdb.perf/gm-pervasive-typedef.cc: New file. * gdb.perf/gm-pervasive-typedef.h: New file. * gdb.perf/gm-std.cc: New file. * gdb.perf/gm-std.h: New file. * gdb.perf/gm-use-cerr.cc: New file. * gdb.perf/gm-utils.h: New file. * gdb.perf/gmonster-null-lookup.py: New file. * gdb.perf/gmonster-pervasive-typedef.py: New file. * gdb.perf/gmonster-print-cerr.py: New file. * gdb.perf/gmonster-ptype-string.py: New file. * gdb.perf/gmonster-runto-main.py: New file. * gdb.perf/gmonster-select-file.py: New file. * gdb.perf/gmonster1-null-lookup.exp: New file. * gdb.perf/gmonster1-pervasive-typedef.exp: New file. * gdb.perf/gmonster1-print-cerr.exp: New file. * gdb.perf/gmonster1-ptype-string.exp: New file. * gdb.perf/gmonster1-runto-main.exp: New file. * gdb.perf/gmonster1-select-file.exp: New file. * gdb.perf/gmonster1.cc: New file. * gdb.perf/gmonster1.exp: New file. * gdb.perf/gmonster2-null-lookup.exp: New file. * gdb.perf/gmonster2-pervasive-typedef.exp: New file. * gdb.perf/gmonster2-print-cerr.exp: New file. * gdb.perf/gmonster2-ptype-string.exp: New file. * gdb.perf/gmonster2-runto-main.exp: New file. * gdb.perf/gmonster2-select-file.exp: New file. * gdb.perf/gmonster2.cc: New file. * gdb.perf/gmonster2.exp: New file. 2015-07-24 Doug Evans * gdb.perf/README: New file. * lib/perftest.exp (tcl_string_list_to_python_list): New function. * lib/gen-perf-test.exp: New file. 2015-07-24 Doug Evans * lib/perftest.exp (PerfTest::compile): Unconditionally call body. (PerfTest::startup): New function. (PerfTest::run): Return result of calling body. (PerfTest::assemble): Rewrite. * gdb.perf/backtrace.exp (PerfTest::assemble): Update function result. * gdb.perf/disassemble.exp (PerfTest::assemble): Ditto. * gdb.perf/single-step.exp (PerfTest::assemble): Ditto. * gdb.perf/skip-prologue.exp (PerfTest::assemble): Ditto. * gdb.perf/solib.exp (PerfTest::assemble): Ditto. 2015-07-24 Doug Evans * lib/gdb.exp (clean_restart): Make executable optional. 2015-07-24 Doug Evans * gdb.base/watchpoint.exp (test_complex_watchpoint): Remove compiler_info references. * gdb.cp/temargs.exp: Ditto. * lib/gdb.exp: Unset compiler_info instead of setting to "unknown". (get_compiler_info): Early exit if already computed. Set compiler_info to "unknown" if there was a problem. (test_compiler_info): Add function comment. Call get_compiler_info. 2015-07-24 Doug Evans * Makefile.in (check/%.exp): Pass directory for GDB_PARALLEL. (workers/%.worker, build-perf): New rule. (GDB_PERFTEST_MODE): New variable. (check-perf): Use it. (clean): Clean up gdb.perf parallel build subdirs. * lib/build-piece.exp: New file. * lib/cache.exp (gdb_do_cache): Include $GDB_PARALLEL in path name. * lib/gdb.exp (standard_output_file): Include $GDB_PARALLEL in path name. (standard_temp_file): Ditto. (GDB_PARALLEL handling): Make outputs,temp,cache directories as subdirs of $GDB_PARALLEL. 2015-07-24 Doug Evans * lib/future.exp (gdb_default_target_compile): New option "early_flags". * lib/gdb.exp (gdb_compile): Undo debian's change in default of --as-needed. 2015-07-24 Sergio Durigan Junior * gdb.base/catch-syscall.exp: Call gdb_exit before gdb_skip_xml_test. 2015-07-24 Pedro Alves * gdb.python/py-events.exp: Accept output between the stop event and the prompt. * gdb.python/py-evsignal.exp: Likewise. * gdb.python/py-evthreads.exp: Likewise. 2015-07-24 Pedro Alves PR gdb/18717 * gdb.threads/non-ldr-exit.c: New file. * gdb.threads/non-ldr-exit.exp: New file. 2015-07-24 Yao Qi * gdb.server/ext-wrapper.exp: Test --wrapper option when restarting process. 2015-07-24 Yao Qi * gdb.server/ext-restart.exp: New file. 2015-07-24 Yao Qi * lib/gdbserver-support.exp (gdbserver_start_extended): Add argument options. * gdb.server/ext-wrapper.exp: New file. 2015-07-23 Doug Evans * gdb.dwarf2/dw2-dummy-cu.S: New file. * gdb.dwarf2/dw2-dummy-cu.exp: New file. 2015-07-23 Pierre-Marie de Rodat * gdb.ada/var_arr_typedef.exp: New testcase. * gdb.ada/var_arr_typedef/pack.adb: New file. * gdb.ada/var_arr_typedef/pack.ads: New file. * gdb.ada/var_arr_typedef/var_arr_typedef.adb: New file. 2015-07-20 Joel Brobecker * gdb.ada/info_exc.exp: Adjust "info exceptions" expected output. 2015-07-16 Jan Kratochvil * gdb.arch/i386-biarch-core.exp: Replace istarget by "complete set gnutarget". Remove expectation for the "core-file" command. 2015-07-15 Jan Kratochvil Revert the previous commit: Tests for validate symbol file using build-id. 2015-07-15 Aleksandar Ristovski * gdb.base/sigaltstack.exp (finish_test): Add kfail for nios2-*-linux*. * gdb.base/sigbpt.exp (stepi_out): Likewise. * gdb.base/siginfo.exp: Likewise. * gdb.base/sigstep.exp (advance, advancei): Likewise. 2015-07-15 Pierre Langlois * gdb.base/range-stepping.exp (gdb_range_stepping_enabled): Move it to ... * lib/range-stepping-support.exp (gdb_range_stepping_enabled): ... here. * gdb.trace/range-stepping.exp: Check that the target supports range stepping. 2015-07-14 Jan Kratochvil * gdb.arch/i386-biarch-core.exp: Fix comment typo. 2015-07-14 Pedro Alves * gdb.base/killed-outside.exp: New file. * gdb.base/killed-outside.c: New file. 2015-07-10 Jan Kratochvil * gdb.asm/asm-source.exp (f at main): Stop at gdbasm_enter. (n at main): New. * gdb.asm/asmsrc1.s: Add comment "mark: main enter". 2015-07-10 Andreas Arnez * gdb.base/gnu_vector.exp: On x86 and x86_64 targets, skip the infcall tests instead of setting up for KFAIL. 2015-07-10 Markus Metzger * gdb.btrace/record_goto-step.exp: New. 2015-07-08 Jan Kratochvil PR compile/18484 * gdb.compile/compile.c (struct struct_type): Add volatile to selffield's type. * gdb.compile/compile.exp (compile code struct_object.selffield = &struct_object): Skip further struct_object tests if this one xfails. 2015-07-08 Robert O'Callahan PR exp/18617 * gdb.trace/ax.exp: Add test. 2015-07-07 Yao Qi * gdb.arch/aarch64-atomic-inst.exp: Check is_aarch64_target instead of istarget "aarch64*-*-*". * gdb.arch/aarch64-fp.exp: Likewise. * gdb.base/float.exp: Likewise. * gdb.reverse/aarch64.exp: Likewise. * lib/gdb.exp (is_aarch64_target): New proc. 2015-07-07 Yao Qi * lib/gdb.exp (is_aarch32_target): New proc. * gdb.arch/arm-bl-branch-dest.exp: Check is_aarch32_target instead of "istarget "arm*-*-*"". * gdb.arch/arm-disp-step.exp: Likewise. * gdb.arch/thumb-bx-pc.exp: Likewise. * gdb.arch/thumb-prologue.exp: Likewise. * gdb.arch/thumb-singlestep.exp: Likewise. * gdb.base/disp-step-syscall.exp: Likewise. * gdb.base/float.exp: Likewise. 2015-07-07 Yao Qi * gdb.base/catch-syscall.exp (test_catch_syscall_multi_arch): Set arch1, arch2, syscall1_name, syscall2_name and syscall_number. 2015-07-07 Yao Qi * gdb.multi/multi-arch-exec.exp: Set march1 and march2 to "" if target is aarch64. If target is aarch64, set compiler=${ARM_CC_FOR_TARGET} if it exists. * gdb.multi/multi-arch.exp: Likewise. 2015-07-07 Simon Marchi * gdb.python/py-lazy-string.exp: Add missing parentheses to print. 2015-07-07 Yao Qi * gdb.arch/thumb-singlestep.exp: Do one more single step. 2015-06-30 Martin Galvan * lib/gdb.exp (test_class_help): Remove the unneeded escaping of '[' and ']' characters. 2015-06-30 Iain Buclaw * gdb.dlang/demangle.exp: Sync tests from libiberty testsuite. 2015-06-29 Pedro Alves PR threads/18127 * gdb.threads/hand-call-new-thread.c: New file. * gdb.threads/hand-call-new-thread.c: New file. 2015-06-26 Keith Seitz Doug Evans PR 16253 * gdb.cp/var-tag-2.cc: New file. * gdb.cp/var-tag-3.cc: New file. * gdb.cp/var-tag-4.cc: New file. * gdb.cp/var-tag.cc: New file. * gdb.cp/var-tag.exp: New file. 2015-06-26 Patrick Palka * gdb.base/history-duplicates.exp: New test. 2015-06-26 Patrick Palka * gdb.base/completion.exp: Test the completion of the "focus" command. 2015-06-26 Jan Kratochvil * gdb.arch/amd64-prologue-skip.S: New file. * gdb.arch/amd64-prologue-skip.exp: New file. 2015-06-25 Simon Marchi * gdb.python/py-prettyprint.exp (run_lang_tests): Add is_address_zero_readable check. 2015-06-24 Peter Bergner * gdb.arch/powerpc-power.exp : Fixup test results. * gdb.arch/powerpc-power.s : Likewise. 2015-06-24 Yao Qi * lib/gdb.exp (supports_get_siginfo_type): Return 1 for all linux targets. 2015-06-24 Yao Qi * lib/gdb.exp (supports_get_siginfo_type): New proc. * gdb.base/siginfo-obj.exp: Invoke supports_get_siginfo_type. * gdb.base/siginfo-thread.exp: Likewise. 2015-06-22 Yao Qi * boards/remote-gdbserver-on-localhost.exp: Add comments. 2015-06-22 Yao Qi * lib/gdb.exp (skip_hw_breakpoint_tests): Return 0 for target aarch64*-*-*. (skip_hw_watchpoint_tests): Likewise. 2015-06-18 Patrick Palka * gdb.base/gdbinit-history.exp: Test the interaction between setting GDBHISTSIZE and setting the history size via .gdbinit. 2015-06-17 Patrick Palka PR gdb/16999 * gdb.base/gdbhistsize-history.exp: New test. 2015-06-17 Patrick Palka * gdb.base/gdbinit-history.exp: Replace occurrences of HISTSIZE with GDBHISTSIZE. * gdb.base/readline.exp: Likewise. 2015-06-17 Yao Qi * lib/gdb.exp (get_build_id): Move braces and "else" to the same line. 2015-06-17 Patrick Palka * gdb.base/gdbinit-history.exp: Add test case to check that an unlimited history file does not get truncated on exit. 2015-06-17 Andreas Arnez * gdb.base/gnu_vector.c: Include stdarg.h and stdio.h. (VECTOR): New macro. Use it... (int4, uint4, char4, float4, int2, longlong2, float2, double2): ...for these typedefs. (int8, char1, int1, double1): New typedefs. (struct just_int2, struct two_int2): New structures. (add_some_intvecs, add_many_charvecs, add_various_floatvecs) (add_structvecs, add_singlevecs): New functions. (main): Call add_some_intvecs twice. * gdb.base/gnu_vector.exp: Drop GCC version check; just attempt the compile and exit upon failure. Try compiling for the "native" architecture. Test inferior function calls with vector arguments and vector return value handling with "finish" and "return". 2015-06-10 Jon Turney * gdb.base/sepdebug.exp: Add EXEEXT where needed. * lib/gdb.exp (get_build_id): Teach how to extract build-id from a PE file. * lib/future.exp (gdb_find_objdump): Add gdb_find_objdump. 2015-06-12 Antoine Tremblay PR breakpoints/16465 * gdb.mi/mi-dprintf-pending.c: New file. * gdb.mi/mi-dprintf-pending.exp: New test. * gdb.mi/mi-dprintf-pendshr.c: New file. 2015-06-10 Walfred Tedeschi Mircea Gherzan * gdb.arch/i386-mpx-map.c: New file. * gdb.arch/i386-mpx-map.exp: New File. 2015-06-10 Walfred Tedeschi * gdb.arch/i386-mpx.c (have_mpx): Indentation fixed. * gdb.arch/i386-mpx.exp: Indentation fixed. 2015-06-10 Walfred Tedeschi * gdb.arch/i386-mpx.c: Added final return to the have_mpx function and improved indentation. * gdb.arch/i386-mpx.exp: Exchanging gdb_send and gdb_expect for gdb_test_multiple. Added additional tests to skip the test. 2015-06-10 Walfred Tedeschi * gdb.arch/i386-avx512.c: Change path in include file. * gdb.arch/i386-avx512.exp: Change include dir path compilation flag. * gdb.arch/i386-mpx.c: Change path in include file. * gdb.arch/i386-mpx.exp: Change include dir path compilation flag. 2015-06-04 Jan Kratochvil * gdb.compile/compile-print.exp (compile print *vararray@3) (compile print *vararrayp@3): Change xfail to kfail compile/18489. 2015-06-03 Jan Kratochvil * gdb.compile/compile.exp (keep jit in memory): Rename to ... (do not keep jit in memory): ... this. (expect 5): Change it to ... (expect no 5): ... this. 2015-06-02 Simon Marchi PR gdb/15564 * gdb.mi/mi-detach.exp: New file. 2015-06-01 Jan Kratochvil PR symtab/18392 * gdb.arch/amd64-tailcall-self.S: New file. * gdb.arch/amd64-tailcall-self.c: New file. * gdb.arch/amd64-tailcall-self.exp: New file. 2015-05-28 Don Breazeal * gdb.base/foll-vfork.exp (main): Disable exec-dependent tests for remote targets by checking is_target_gdbserver. 2015-05-27 Doug Evans * gdb.dwarf2/opaque-type-lookup-2.c: New file. * gdb.dwarf2/opaque-type-lookup.c: New file. * gdb.dwarf2/opaque-type-lookup.exp: New file. 2015-05-26 Doug Evans * gdb.cp/iostream.cc: New file. * gdb.cp/iostream.exp: New file. 2015-05-26 Doug Evans * gdb.dwarf2/dw2-op-call.exp: Update. * gdb.dwarf2/dw4-sig-types.exp: Update. * gdb.dwarf2/implptr.exp: Update. * gdb.mi/mi-cmd-param-changed.exp: Update. 2015-05-26 Doug Evans * gdb.python/py-lazy-string.c: New file. * gdb.python/py-lazy-string.exp: New file. * gdb.python/py-prettyprint.c (lazystring) : New member. (main): Update. Add estring3. * gdb.python/py-prettyprint.exp: Add tests for strings at address 0. * gdb.python/py-prettyprint.py (pp_ls): Handle length. 2015-05-26 Omair Javaid Yao Qi * gdb.reverse/aarch64.c: New. * gdb.reverse/aarch64.exp: New. 2015-05-26 Omair Javaid * lib/gdb.exp (supports_process_record): Return true for aarch64*-linux*. (supports_reverse): Likewise. 2015-05-22 Patrick Palka * gdb.base/gdbinit-history.exp (test_gdbinit_history_setting): Use with_test_prefix. 2015-05-21 Andrew Burgess * gdb.base/completion.exp: Add test for completion of layout names. 2015-05-20 Andrew Burgess * lib/gdb.exp (skip_tui_tests): New proc. * gdb.base/tui-layout.exp: Check skip_tui_tests. 2015-05-19 Pedro Alves * gdb.base/gdbinit-history.exp (test_gdbinit_history_setting): Save the whole env array instead of just HOME. Unset HISTSIZE in the environment while testing. Restore whole environment afterwards. 2015-05-16 Doug Evans * gdb.guile/scm-ports.c: New file. * gdb.guile/scm-ports.exp: Add memory port tests. 2015-05-16 Jan Kratochvil * gdb.compile/compile-print.c: New file. * gdb.compile/compile-print.exp: New file. 2015-05-16 Jan Kratochvil * gdb.compile/compile-ops.exp: Cast param to void. * gdb.compile/compile.exp: Complete type for _gdb_expr. (compile code struct_object.selffield = &struct_object): Add xfail. 2015-05-15 Joel Brobecker * gdb.ada/arr_enum_with_gap: New testcase. 2015-05-15 Joel Brobecker * gdb.ada/byte_packed_arr: New testcase. 2015-05-15 Joel Brobecker * gdb.ada/pckd_neg: New testcase. 2015-05-13 Patrick Palka PR gdb/17820 * gdb.base/gdbinit-history.exp: New test. * gdb.base/gdbinit-history/unlimited/.gdbinit: New file. * gdb.base/gdbinit-history/zero/.gdbinit: New file. 2015-05-09 Siva Chandra Reddy * gdb.python/py-xmethods.cc: Enhance test case. * gdb.python/py-xmethods.exp: New tests. * gdb.python/py-xmethods.py (A_indexoper): New xmethod worker function. (B_indexoper): Likewise. (global_dm_list) : Add new xmethod worker functions. 2015-05-08 Sergio Durigan Junior * gdb.base/coredump-filter.exp: Correctly unset "coredump_var_addr" array. 2015-05-08 Pedro Alves * gdb.server/non-existing-program.exp: Unset spawn_id. 2015-05-08 Siva Chandra Reddy PR python/18291 * gdb.python/py-xmethods.exp: Add tests. 2015-05-08 Yao Qi PR gdb/18208 * gdb.base/coredump-filter.c (set_coredump_filter): New function. * gdb.base/coredump-filter.exp (do_save_core): Call inferior function set_coredump_filter, and remove remote_exec call. Remove argument ipid. Callers update. (top level): Don't get inferior's PID. 2015-05-08 Andreas Arnez * gdb.base/watch_thread_num.exp: Skip test on targets without access watchpoints. 2015-05-06 Pedro Alves PR server/18081 * gdb.server/non-existing-program.exp: New file. 2015-05-05 Joel Brobecker * gdb.ada/out_of_line_in_inlined.exp: Add run and "bt" tests. 2015-05-05 Joel Brobecker * gdb.ada/out_of_line_in_inlined: New testcase. 2015-05-05 Joel Brobecker * gdb.ada/var_rec_arr: New testcase. 2015-04-30 Yao Qi * gdb.base/break-idempotent.exp: If skip_hw_watchpoint_multi_tests returns true, skip the tests on "rwatch" and "awatch". 2015-04-30 Yao Qi * gdb.base/relativedebug.exp: Invoke gdb command "info sharedlibrary", and if libc.so doesn't have debug info, skip the test. 2015-04-29 Doug Evans * gdb.python/py-xmethods.exp: Add ptype tests. * gdb.python/py-xmethods.py (E_method_char_worker): Add get_result_type method. 2015-04-29 Luis Machado * gdb.base/watch-bitfields.exp: Switch to software watchpoints if the target does not support hardware watchpoints. 2015-04-29 Luis Machado * gdb.base/break-always.exp: Abort testing if writing to memory causes an error. 2015-04-28 Doug Evans * gdb.python/py-pp-maint.py: Move "replace" testing to ... * gdb.python/py-pp-registration.exp: ... here. New file. * gdb.python/py-pp-registration.c: New file. * gdb.python/py-pp-registration.py: New file. 2015-04-28 Doug Evans * gdb.python/py-bad-printers.c: New file. * gdb.python/py-bad-printers.py: New file. * gdb.python/py-bad-printers.exp: New file. 2015-04-28 Sasha Smundak * gdb.python/py-type.exp: New test. 2015-04-28 Andy Wingo * gdb.python/py-parameter.exp: * gdb.guile/scm-parameter.exp: Escape the path that we are matching against, as it might contain characters that are special to regular expressions. 2015-04-27 Joel Brobecker * gdb.ada/rec_comp: New testcase. 2015-04-26 Sergio Durigan Junior * gdb.base/coredump-filter.exp: Clear variable "coredump_var_addr" before using it. 2015-04-24 Andrew Burgess * gdb.base/dump.exp: Add *.verilog files to all_files list. Add new tests for verilog output. 2015-04-24 Yao Qi * boards/remote-gdbserver-on-localhost.exp: New file. 2015-04-23 Pedro Alves * gdb.base/interrupt.exp: Use an indirect spawn id list holding $inferior_spawn_id instead of $inferior_spawn_id directly. On "end of file", remove $inferior_spawn_id from the indirect list. 2015-04-23 Pedro Alves * gdb.base/interrupt.exp: Rename saw_eof to saw_end_of_file. 2015-04-23 Pedro Alves * lib/gdb.exp (gdb_test_multiple): Match eof/full_buffer/timeout on $any_spawn_id instead of only on $gdb_spawn_id. 2015-04-21 Pierre Muller PR pascal/17815 * lib/pascal.exp (gpc_compile): Add new option "class". (fpc_compile): Likewise. * gdb.pascal/case-insensitive-symbols.pas: New file. * gdb.pascal/case-insensitive-symbols.exp: New file. 2015-04-20 Gary Benson * gdb.base/attach.exp: Fix three extended remote failures. 2015-04-17 Gary Benson * gdb.server/server-exec-info.exp: Inhibit GDB from accessing the main executable over the remote protocol. 2015-04-16 Pedro Alves * boards/native-extended-gdbserver.exp (mi_gdb_start): Don't start a new gdbserver if gdbserver_reconnect_p is set. 2015-04-16 Pedro Alves * lib/gdbserver-support.exp (gdb_exit): If gdbserver_reconnect_p is set, don't exit gdbserver. 2015-04-16 Andreas Arnez * gdb.arch/s390-vregs.S (change_vrs): Replace exrl by an appropriate .insn, such that an older assembler can be used. * gdb.arch/s390-vregs.exp: Add the compile flag -mzarch, to enable the z/Architecture instruction set on 31-bit targets as well. 2015-04-16 Andreas Arnez * gdb.go/handcall.exp: Remove all logic related to the first breakpoint and rely on go_runto_main instead. * gdb.go/strings.exp: Likewise. * gdb.go/unsafe.exp: Likewise. * gdb.go/hello.exp: Likewise. Also rename the remaining breakpoint marker to "breakpoint 1". * gdb.go/handcall.go: Remove comment "set breakpoint 1 here". * gdb.go/strings.go: Likewise. * gdb.go/unsafe.go: Likewise. * gdb.go/hello.go: Likewise. Also remove the second occurrence of "set breakpoint 2 here" and rename the remaining breakpoint marker to "breakpoint 1". 2015-04-15 Simon Marchi * gdb.python/py-framefilter.py (ErrorFilter.filter): Use map function if itertools.imap is not present. * gdb.python/py-objfile.exp: Add parentheses. * gdb.python/py-type.exp: Same. * gdb.python/py-unwind-maint.py: Same. 2015-04-15 Yao Qi * gdb.dwarf2/dynarr-ptr.exp (assemble): Use $ptr_size instead of ":$ptr_size" and set its form explicitly. 2015-04-15 Pedro Alves Yao Qi * gdb.base/watch-bitfields.exp (test_watch_location): Increase timeout by factor of 4. (test_regular_watch): Likewise. * gdb.base/watchpoint-solib.exp: Use with_timeout_factor. * gdb.reverse/sigall-reverse.exp: Likewise. * gdb.reverse/until-precsave.exp: Likewise. * lib/gdb.exp (with_timeout_factor): New proc. (gdb_expect): Move some code to ... (get_largest_timeout): ... here. New procedure. 2015-04-14 Luis Machado * gdb.base/bp-permanent.exp (test): Reinstate correct test message. 2015-04-13 Luis Machado * gdb.base/bp-permanent.exp (test): Handle the case of being unable to write to the .text section. 2015-04-13 Luis Machado * gdb.base/coredump-filter.exp: Restrict test to Linux systems only. Handle the case of targets that do not provide PID information. 2015-04-13 Yao Qi * lib/gdbserver-support.exp (gdb_exit): Catch exception and use expect instead of gdb_expect. 2015-04-13 Sergio Durigan Junior * gdb.base/coredump-filter.exp: Rename variable "addr" to "coredump_var_addr" to avoid naming conflict with other testcases. 2015-04-10 Pedro Alves * gdb.threads/signal-while-stepping-over-bp-other-thread.exp: Use gdb_test_sequence and gdb_assert. 2015-04-10 Pedro Alves * gdb.threads/step-over-trips-on-watchpoint.exp (do_test): Use test messages that don't include the breakpoint address. 2015-04-10 Yao Qi * gdb.base/watchpoint-reuse-slot.exp (valid_addr_p): Return false for some offset and width combinations which aren't supported by linux kernel. 2015-04-10 Pedro Alves * gdb.threads/step-over-lands-on-breakpoint.exp (do_test): New procedure, factored out from ... (top level): ... here. Add "set displaced-stepping" testing axis. * gdb.threads/step-over-trips-on-watchpoint.exp (do_test): New parameter "displaced". Use it. (top level): Use foreach and add "set displaced-stepping" testing axis. 2015-04-10 Pedro Alves * gdb.threads/step-over-trips-on-watchpoint.c (child_function): Remove comment. * gdb.threads/step-over-trips-on-watchpoint.exp (do_test): Find both the address of the instruction that triggers the watchpoint and the address of the instruction immediately after, and use those addresses for the test. Fix comment. 2015-04-10 Pedro Alves * gdb.base/sigstep.exp (breakpoint_to_handler) (breakpoint_to_handler_entry): New parameter 'displaced'. Use it. Test "backtrace" in handler. (breakpoint_over_handler): New parameter 'displaced'. Use it. (top level): Add new "displaced" test axis to breakpoint_to_handler, breakpoint_to_handler_entry and breakpoint_over_handler. 2015-04-10 Pedro Alves PR gdb/18216 * gdb.threads/multiple-step-overs.exp: Remove expected eof. 2015-04-10 Yao Qi * gdb.arch/arm-disp-step.S (main): Call test_add_rn_pc. (test_add_rn_pc): New function. * gdb.arch/arm-disp-step.exp (test_add_rn_pc): New proc. (top level): Invoke test_add_rn_pc. 2015-04-10 Pedro Alves PR gdb/13858 * gdb.base/step-over-no-symbols.exp: New file. 2015-04-09 Andy Wingo * gdb.guile/scm-frame.exp: Add frame-read-register tests, modelled after the Python tests. 2015-04-08 Keith Seitz PR python/16699 * gdb.python/py-completion.exp: New tests for completion. * gdb.python/py-completion.py (CompleteLimit1): New class. (CompleteLimit2): Likewise. (CompleteLimit3): Likewise. (CompleteLimit4): Likewise. (CompleteLimit5): Likewise. (CompleteLimit6): Likewise. (CompleteLimit7): Likewise. 2015-04-08 Pedro Alves PR gdb/18214 PR gdb/18216 * gdb.threads/multiple-step-overs.c (sigusr1_handler): New function. (main): Install it as SIGUSR1 handler. * gdb.threads/multiple-step-overs.exp (setup): Remove 'prefix' parameter. Always use "setup" as prefix. Toggle "set displaced-stepping" off/on depending on global. Don't switch to thread 1 here. (top level): Add displaced stepping "off/on" test axis. Update "setup" calls. Wrap each subtest with with_test_prefix. Test continuing with a queued signal in each thread. 2015-04-08 Pedro Alves * gdb.trace/actions.exp: Use gdb_load before gdb_run_cmd. * gdb.trace/infotrace.exp: Use gdb_load before gdb_run_cmd. Use gdb_breakpoint instead of gdb_test that doesn't expect anything. Return early if running to main fails. * gdb.trace/while-stepping.exp: Likewise. 2015-04-07 Pedro Alves * gdb.base/interrupt.exp: Don't skip if $inferior_spawn_id != $gdb_spawn_id. Use send_inferior and $inferior_spawn_id to interact with inferior program. 2015-04-07 Pedro Alves * lib/gdb.exp (inferior_spawn_id): New global. (gdb_test_multiple): Handle "-i". Reset the spawn id to GDB's spawn id after processing the user code. (default_gdb_start): Set inferior_spawn_id. (send_inferior): New procedure. * lib/gdbserver-support.exp (gdbserver_start): Set inferior_spawn_id. (close_gdbserver, gdb_exit): Unset inferior_spawn_id. 2015-04-07 Pedro Alves * lib/gdb.exp (gdb_finish): Delete persistent gdbserver handling. * lib/gdbserver-support.exp (gdbserver_start): Make $server_spawn_id global. (gdbserver_start): Don't wait for gdbserver's spawn id with expect_background. (close_gdbserver): New procedure. (gdb_exit): Rename the default version and reimplement. 2015-04-07 Pedro Alves * lib/gdb.exp (gdb_test_multiple): When processing an argument, append the substituted item, not the original item. 2015-04-07 Pedro Alves * gdb.base/interrupt.exp: Use gdb_test_multiple instead of gdb_expect. 2015-04-07 Pedro Alves * gdb.base/interrupt.exp: Don't handle the case of the inferior output appearing once only. 2015-04-07 Pedro Alves * gdb.trace/actions.exp: Use gdb_breakpoint instead of gdb_test that doesn't expect anything. Return early if running to main fails. 2015-04-07 Yao Qi * gdb.threads/non-stop-fair-events.c (SECONDS): New macro. (child_function): Call alarm. (main): Move call to alarm into the loop. * gdb.threads/non-stop-fair-events.exp: Build program with -DTIMEOUT=$timeout. 2015-04-06 Doug Evans * lib/pascal.exp (gpc_compile): Rename dest arg to destfile. Fix dest parameter to board_info. (fpc_compile): Ditto. (gdb_compile_pascal): Rename dest arg to destfile. 2015-04-03 Pierre-Marie de Rodat * gdb.ada/funcall_ref.exp: New file. * gdb.ada/funcall_ref/foo.adb: New file. 2015-04-02 Yao Qi * gdb.threads/no-unwaited-for-left.exp: Set up kfail if target is remote. 2015-04-02 Gary Benson * gdb.base/break-probes.exp: Cope with "target:" sysroot. 2015-04-01 Sasha Smundak * gdb.python/py-unwind-maint.c: New file. * gdb.python/py-unwind-maint.exp: New test. * gdb.python/py-unwind-maint.py: New file. * gdb.python/py-unwind.c: New file. * gdb.python/py-unwind.exp: New test. * gdb.python/py-unwind.py: New test. 2015-04-01 Pedro Alves * gdb.threads/manythreads.exp (interrupt_and_wait): Pass $message to fail instead of non-existent $test. 2015-04-01 Pedro Alves * lib/gdb.exp (gdb_spawn_with_cmdline_opts): Append space to GDBFLAGS if not empty. 2015-04-01 Pierre-Marie de Rodat * gdb.ada/complete.exp: Remove "multi_line". * gdb.ada/info_exc.exp: Remove "multi_line". * gdb.ada/packed_tagged.exp: Remove "multi_line". * gdb.ada/ptype_field.exp: Remove "multi_line". * gdb.ada/sym_print_name.exp: Remove "multi_line". * gdb.ada/tagged.exp: Remove "multi_line". * gdb.btrace/buffer-size.exp: Replace [join [list ...]] with [multi_line ...] * gdb.btrace/delta.exp: Likewise. * gdb.btrace/exception.exp: Likewise. * gdb.btrace/function_call_history.exp: Likewise. * gdb.btrace/instruction_history.exp: Likewise. * gdb.btrace/nohist.exp: Likewise. * gdb.btrace/record_goto.exp: Likewise. * gdb.btrace/segv.exp: Likewise. * gdb.btrace/stepi.exp: Likewise. * gdb.btrace/tailcall.exp: Likewise. * gdb.btrace/unknown_functions.exp: Likewise. * gdb.dwarf2/dw2-undefined-ret-addr.exp: Likewise. * lib/gdb.exp: Add the "multi_line" helper. 2015-04-01 Pedro Alves * gdb.threads/tid-reuse.c: New file. * gdb.threads/tid-reuse.exp: New file. 2015-03-31 Sergio Durigan Junior PR corefiles/16092 * gdb.base/coredump-filter.c: New file. * gdb.base/coredump-filter.exp: Likewise. 2015-03-27 Petr Machata * lib/dwarf.exp (Dwarf::_handle_DW_FORM): Handle DW_FORM_sec_offset. (Dwarf::_line_count, Dwarf::_line_saw_file): New variables. (Dwarf::assemble): Initialize them. (Dwarf::lines): New function. 2015-03-26 Jon Turney * lib/gdb.exp (gdb_target_symbol_prefix_flags): Don't set SYMBOL_PREFIX for x86_64-*-cygwin. 2015-03-26 Andy Wingo PR symtab/18148 * gdb.dwarf2/dw2-intercu.S (one, two): Add variables that have a const_value but not a location. * gdb.dwarf2/dw2-intercu.exp: Add tests that constants without location defined in non-main CUs are visible. 2015-03-26 Yao Qi PR testsuite/18139 * gdb.linespec/break-asm-file0.s (func): New label .Lfunc_2. Add a line number entry for the same line. * gdb.linespec/break-asm-file1.s (func): New label .Lfunc_2. Add a line number entry for the same line. 2015-03-26 Yao Qi * gdb.linespec/break-asm-file0.s (func2): Use nop instead of .int 0. (func): Likewise. Add .Lfunc_1 label. Use .Lfunc_1 label. * gdb.linespec/break-asm-file1.s (func3): Use nop instead of .int 0. (func): Likewise. Use .Lfunc_1 label. 2015-03-26 Yao Qi * gdb.linespec/break-asm-file.exp: Don't call prepare_for_testing. Call gdb_compile instead to compile each .s files without debug information. 2015-03-26 Yao Qi * gdb.base/savedregs.exp (process_saved_regs): Make "Saved registers:" optional in the pattern. 2015-03-25 Markus Metzger * gdb.btrace/next.exp: Merged into step.exp. * gdb.btrace/finish.exp: Merged into step.exp. * gdb.btrace/nexti.exp: Merged into stepi.exp. * gdb.btrace/step.exp: Use record_goto.c as test file. Avoid using "record goto" and checking the exact replay position. * gdb.btrace/stepi.exp: Choose test file based on target. Do not check for "Recording format" in "info record" output. * gdb.btrace/record_goto.exp: Choose test file based on target. * gdb.btrace/x86-record_goto.S: Renamed into ... * gdb.btrace/x86_64-record_goto.S: ... this. * gdb.btrace/i686-record_goto.S: New. * gdb.btrace/x86-tailcall.S: Renamed into ... * gdb.btrace/x86_64-tailcall.S: ... this. * gdb.btrace/i686-tailcall.S: New. * gdb.btrace/x86-tailcall.c: Renamed into ... * gdb.btrace/tailcall.c: ... this. Split "return ++answer" into two separate statements. Update test. * gdb.btrace/delta.exp: Use record_goto.c as test file. * gdb.btrace/gcore.exp: Use record_goto.c as test file. * gdb.btrace/nohist.exp: Use record_goto.c as test file. * gdb.btrace/tailcall.exp: Choose test file based on target. * gdb.btrace/Makefile.in: Remove next, finish, and nexti. 2015-03-25 Markus Metzger * gdb.btrace/exception.exp: Increase BTS buffer size. 2015-03-24 Pedro Alves * gdb.threads/no-unwaited-for-left.exp: Test "thread apply all". 2015-03-24 Pedro Alves * gdb.threads/schedlock.exp (test_step): No longer expect that "set scheduler-locking step" with "next" over a function call runs threads unlocked. 2015-03-24 Antoine Tremblay * gdb.mi/mi-pending.exp: Fix output of breakpoint test. 2015-03-24 Antoine Tremblay PR breakpoints/16466 * gdb.mi/Makefile.in: Add mi-pendshr2.sl to cleanup. * gdb.mi/mi-pending.c (thread_func): New function. (int main): Add threading support required. * gdb.mi/mi-pending.exp: Add tests for this issue. * gdb.mi/mi-pendshr.c (pendfunc1): Remove stdio dependency. (pendfunc2): Remove stdio dependency. * gdb.mi/mi-pendshr2.c: New file. 2015-03-23 Keith Seitz * gdb.linespec/keywords.c: New file. * gdb.linespec/keywords.exp: New file. 2015-03-23 Keith Seitz PR gdb/18021 * gdb.dwarf2/staticvirtual.exp: New test. 2015-03-20 Jan Kratochvil * Makefile.in (ALL_SUBDIRS): Remove gdb.hp. * README: Remove HP-UX and gdb.hp. (configuration): * configure: Regenerate. * configure.ac (AC_OUTPUT): Remove gdb.hp/Makefile, gdb.hp/gdb.objdbg/Makefile, gdb.hp/gdb.base-hp/Makefile, gdb.hp/gdb.aCC/Makefile, gdb.hp/gdb.compat/Makefile, gdb.hp/gdb.defects/Makefile. * gdb.hp/Makefile.in: File deleted. * gdb.hp/gdb.aCC/Makefile.in: File deleted. * gdb.hp/gdb.aCC/optimize.c: File deleted. * gdb.hp/gdb.aCC/optimize.exp: File deleted. * gdb.hp/gdb.aCC/run.c: File deleted. * gdb.hp/gdb.aCC/watch-cmd.exp: File deleted. * gdb.hp/gdb.base-hp/Makefile.in: File deleted. * gdb.hp/gdb.base-hp/callfwmall.c: File deleted. * gdb.hp/gdb.base-hp/callfwmall.exp: File deleted. * gdb.hp/gdb.base-hp/dollar.c: File deleted. * gdb.hp/gdb.base-hp/dollar.exp: File deleted. * gdb.hp/gdb.base-hp/genso-thresh.c: File deleted. * gdb.hp/gdb.base-hp/hwwatchbus.c: File deleted. * gdb.hp/gdb.base-hp/hwwatchbus.exp: File deleted. * gdb.hp/gdb.base-hp/pxdb.c: File deleted. * gdb.hp/gdb.base-hp/pxdb.exp: File deleted. * gdb.hp/gdb.base-hp/reg-pa64.exp: File deleted. * gdb.hp/gdb.base-hp/reg-pa64.s: File deleted. * gdb.hp/gdb.base-hp/reg.exp: File deleted. * gdb.hp/gdb.base-hp/reg.s: File deleted. * gdb.hp/gdb.base-hp/sized-enum.c: File deleted. * gdb.hp/gdb.base-hp/sized-enum.exp: File deleted. * gdb.hp/gdb.base-hp/so-thresh.exp: File deleted. * gdb.hp/gdb.base-hp/so-thresh.mk: File deleted. * gdb.hp/gdb.base-hp/so-thresh.sh: File deleted. * gdb.hp/gdb.compat/Makefile.in: File deleted. * gdb.hp/gdb.compat/average.c: File deleted. * gdb.hp/gdb.compat/sum.c: File deleted. * gdb.hp/gdb.compat/xdb.c: File deleted. * gdb.hp/gdb.compat/xdb0.c: File deleted. * gdb.hp/gdb.compat/xdb0.h: File deleted. * gdb.hp/gdb.compat/xdb1.c: File deleted. * gdb.hp/gdb.compat/xdb1.exp: File deleted. * gdb.hp/gdb.compat/xdb2.exp: File deleted. * gdb.hp/gdb.compat/xdb3.exp: File deleted. * gdb.hp/gdb.defects/Makefile.in: File deleted. * gdb.hp/gdb.defects/bs14602.c: File deleted. * gdb.hp/gdb.defects/bs14602.exp: File deleted. * gdb.hp/gdb.defects/solib-d.c: File deleted. * gdb.hp/gdb.defects/solib-d.exp: File deleted. * gdb.hp/gdb.defects/solib-d1.c: File deleted. * gdb.hp/gdb.defects/solib-d2.c: File deleted. * gdb.hp/gdb.objdbg/Makefile.in: File deleted. * gdb.hp/gdb.objdbg/objdbg01.exp: File deleted. * gdb.hp/gdb.objdbg/objdbg01/x1.cc: File deleted. * gdb.hp/gdb.objdbg/objdbg01/x2.cc: File deleted. * gdb.hp/gdb.objdbg/objdbg01/x3.cc: File deleted. * gdb.hp/gdb.objdbg/objdbg01/x3.h: File deleted. * gdb.hp/gdb.objdbg/objdbg02.exp: File deleted. * gdb.hp/gdb.objdbg/objdbg02/x1.cc: File deleted. * gdb.hp/gdb.objdbg/objdbg02/x2.cc: File deleted. * gdb.hp/gdb.objdbg/objdbg02/x3.cc: File deleted. * gdb.hp/gdb.objdbg/objdbg03.exp: File deleted. * gdb.hp/gdb.objdbg/objdbg03/x1.cc: File deleted. * gdb.hp/gdb.objdbg/objdbg03/x2.cc: File deleted. * gdb.hp/gdb.objdbg/objdbg03/x3.cc: File deleted. * gdb.hp/gdb.objdbg/objdbg04.exp: File deleted. * gdb.hp/gdb.objdbg/objdbg04/x.h: File deleted. * gdb.hp/gdb.objdbg/objdbg04/x1.cc: File deleted. * gdb.hp/gdb.objdbg/objdbg04/x2.cc: File deleted. * gdb.hp/gdb.objdbg/tools/symaddr: File deleted. * gdb.hp/gdb.objdbg/tools/symaddr.pa64: File deleted. * gdb.hp/gdb.objdbg/tools/test-objdbg.cc: File deleted. * gdb.hp/tools/odump: File deleted. 2015-03-19 Pedro Alves * gdb.threads/continue-pending-status.exp (saw_thread_2) (saw_thread_3): New globals. (top level): Increment them when an event for the corresponding thread is seen. (no thread starvation): New test. 2015-03-19 Pedro Alves * gdb.threads/continue-pending-status.c: New file. * gdb.threads/continue-pending-status.exp: New file. 2015-03-18 Pedro Alves * gdb.base/disp-step-syscall.exp (disp_step_cross_syscall): Use gdb_is_target_remote instead of is_remote. Use gdb_test_multiple instead of gdb_expect. Exit early if gdb_test_multiple hits its internal matches. Tighten stepi tests expected output. Fail on exit with any signal, instead of just SIGILL. 2015-03-18 Yao Qi PR tdep/18107 * gdb.base/catch-syscall.c [!SYS_pipe] (pipe2_syscall): New variable. * gdb.base/catch-syscall.exp: Don't skip it on aarch64*-*-linux* target. Remove elements in all_syscalls. (test_catch_syscall_multi_arch): Skip it on aarch64*-linux* target. (setup_all_syscalls): New proc. 2015-03-16 Yao Qi * gdb.base/watchpoint-reuse-slot.exp (valid_addr_p): New proc. (top level): Skip tests if valid_addr_p returns false for $cmd1 or $cmd2. 2015-03-11 Andy Wingo * gdb.guile/scm-objfile.exp: Add objfile-progspace test. 2015-03-11 Yao Qi * gdb.base/catch-syscall.exp: Fix typo in comments. 2015-03-11 Yao Qi * gdb.base/catch-syscall.exp: Skip it on HP-UX target. 2015-03-09 Pedro Alves * dg-extract-results.py: Delete. 2015-03-09 Pedro Alves Merge dg-extract-results.sh from GCC upstream (r218843). 2014-12-17 Sergio Durigan Junior * dg-extract-results.sh: Use --text with grep to avoid issues with binary files. Fall back to cat -v, if that doesn't work. 2015-03-05 Pedro Alves * gdb.base/bp-permanent.exp: Tighten "next over setup" regex. 2015-03-04 Simon Marchi * lib/mi-support.exp (mi_expect_interrupt): Accept alternative event for when in all-stop mode. 2015-03-04 Pedro Alves * gdb.threads/thread-specific-bp.exp: Delete "info threads" test. 2015-03-04 Mark Kettenis * gdb.base/foll-fork.exp: Enable on *-*-openbsd*. 2015-03-04 Andreas Arnez * gdb.base/breakpoint-in-ro-region.exp (test_single_step): In the regexps for GDB's current line display, accept a hex address preceding the line number. 2015-03-04 Andreas Arnez * gdb.base/catch-syscall.exp (test_catch_syscall_multi_arch): Set the 'arch1' variable for "s390*-linux*" targets. 2015-03-04 Pedro Alves * gdb.threads/clone-thread_db.c: Include unistd.h and pthread.h. (main): Pass missing retval argument to pthread_join call. 2015-03-02 Pedro Alves * gdb.threads/thread-execl.exp (do_test): Handle non-stop. (top level): Call do_test with non-stop as well. 2015-03-02 Pedro Alves * lib/gdb.exp (gdb_test_multiple) : Set result to -1. 2015-03-02 Andreas Arnez * gdb.arch/s390-vregs.exp: New test. * gdb.arch/s390-vregs.S: New file. 2015-02-27 Pedro Alves * gdb.gdb/python-interrupts.exp (test_python_interrupts): Adjust call to catch_command_errors. * gdb.gdb/python-selftest.exp (selftest_python): Adjust call to catch_command_errors. 2015-02-27 Pedro Alves * gdb.gdb/complaints.exp (test_initial_complaints): Also accept "true" for boolean result. * gdb.gdb/selftest.exp (test_with_self): Also accept full prototype of main. 2015-02-27 Pedro Alves * lib/unbuffer_output.c: New file. * gdb.base/interrupt.c: Include "../lib/unbuffer_output.c". (main): Call gdb_unbuffer_output. 2015-02-27 Yao Qi * gdb.base/catch-syscall.exp: Don't skip it on hppa*-hp-hpux* target. 2015-02-26 Doug Evans * gdb.cp/class2.cc (Dbase, D): New classes. (main): New local delta. * gdb.cp/class2.exp: Test printing delta. * gdb.cp/classes.cc (DynamicBase2, DynamicBar): New classes. (dynbar): New global. * gdb.cp/classes.exp (test_ptype_class_objects): Test ptype DynamicBar. 2015-02-26 Jan Kratochvil * gdb.compile/compile-ifunc.c: New file. * gdb.compile/compile-ifunc.exp: New file. 2015-02-26 Antoine Tremblay * gdb.base/structs.exp: Check for correct struct on finish. 2015-02-26 Yao Qi * lib/dwarf.exp (function_range): Adjust pattern when $func_length is zero. 2015-02-26 Jan Kratochvil * gdb.arch/cordic.ko.bz2: New file. * gdb.arch/cordic.ko.debug.bz2: New file. * gdb.arch/ppc64-symtab-cordic.exp: New file. 2015-02-25 Yao Qi * gdb.xml/tdesc-regs.exp: Set core-regs to aarch64-core.xml for aarch64*-*-* target. 2015-02-23 Pedro Alves * lib/gdb.exp (delete_breakpoints): Rewrite using gdb_test_multiple. 2015-02-23 Pedro Alves * gdb.base/info-os.c: Include stdlib.h. 2015-02-22 Doug Evans PR symtab/17855 * gdb.ada/exec_changed.exp: Add second test where symbol lookup cache is read after symbols have been re-read. * gdb.ada/exec_changed/first.adb (First): New procedure Break_Me. * gdb.ada/exec_changed/second.adb (Second): Ditto. 2015-02-21 Doug Evans * gdb.cp/anon-ns.exp: Add test for ptype '(anonymous namespace)'. 2015-02-21 Jan Kratochvil PR corefiles/17808 * gdb.arch/i386-biarch-core.core.bz2: New file. * gdb.arch/i386-biarch-core.exp: New file. 2015-02-21 Pedro Alves * gdb.threads/multi-create-ns-info-thr.exp: Return early if runto_main fails. 2015-02-20 Pedro Alves * gdb.base/solib-corrupted.exp: Expect "stap" as first column of info probes. 2015-02-20 Pedro Alves * gdb.threads/multi-create-ns-info-thr.exp: New file. 2015-02-20 Pedro Alves * gdb.trace/no-attach-trace.exp: Don't run to main. Do clean_restart before gdb_target_supports_trace. 2015-02-20 Pedro Alves PR threads/18006 * gdb.threads/clone-thread_db.c: New file. * gdb.threads/clone-thread_db.exp: New file. 2015-02-19 Antoine Tremblay PR breakpoints/16812 * gdb.base/catch-gdb-caused-signals.c: New file. * gdb.base/catch-gdb-caused-signals.exp: New file. 2015-02-18 Jose E. Marchesi * configure: Regenerated. * configure.ac: Use GDB_AC_TRANSFORM. * aclocal.m4: sinclude ../transform.m4. 2015-02-17 Jose E. Marchesi * lib/dtrace.exp: New file. * gdb.base/dtrace-probe.exp: Likewise. * gdb.base/dtrace-probe.d: Likewise. * gdb.base/dtrace-probe.c: Likewise. * lib/pdtrace.in: Likewise. * configure.ac: Output variables with the transformed names of the strip, readelf, as and nm tools. AC_SUBST lib/pdtrace.in. * configure: Regenerated. 2015-02-17 Jose E. Marchesi * gdb.base/stap-probe.exp (stap_test): Remove "SystemTap" from expected message when trying to access $_probe_* convenience variables while not on a probe. 2015-02-11 Jan Kratochvil * gdb.python/py-framefilter.exp (pagination quit - *): New tests. 2015-02-11 Pedro Alves * gdb.threads/step-bg-decr-pc-switch-thread.c: New file. * gdb.threads/step-bg-decr-pc-switch-thread.exp: New file. 2015-02-10 Doug Evans * lib/gdb.exp (gdb_load): Always return a result. 2015-02-10 Pedro Alves * gdb.threads/signal-sigtrap.c: New file. * gdb.threads/signal-sigtrap.exp: New file. 2015-02-10 Antoine Tremblay * gdb.trace/no-attach-trace.c: New file. * gdb.trace/no-attach-trace.exp: New file. 2015-02-09 Mark Wielaard * gdb.dwarf2/atomic.c: New file. * gdb.dwarf2/atomic-type.exp: Likewise. 2015-02-09 Markus Metzger * gdb.btrace/buffer-size.exp: Update "info record" output. * gdb.btrace/delta.exp: Update "info record" output. * gdb.btrace/enable.exp: Update "info record" output. * gdb.btrace/finish.exp: Update "info record" output. * gdb.btrace/instruction_history.exp: Update "info record" output. * gdb.btrace/next.exp: Update "info record" output. * gdb.btrace/nexti.exp: Update "info record" output. * gdb.btrace/step.exp: Update "info record" output. * gdb.btrace/stepi.exp: Update "info record" output. * gdb.btrace/nohist.exp: Update "info record" output. 2015-02-09 Markus Metzger * gdb.btrace/buffer-size: New. 2015-02-09 Markus Metzger * gdb.btrace/delta.exp: Update "info record" output. * gdb.btrace/enable.exp: Update "info record" output. * gdb.btrace/finish.exp: Update "info record" output. * gdb.btrace/instruction_history.exp: Update "info record" output. * gdb.btrace/next.exp: Update "info record" output. * gdb.btrace/nexti.exp: Update "info record" output. * gdb.btrace/step.exp: Update "info record" output. * gdb.btrace/stepi.exp: Update "info record" output. * gdb.btrace/nohist.exp: Update "info record" output. 2015-02-06 Simon Marchi PR gdb/15678 * gdb.base/ena-dis-br.exp: Test "enable count" for bad user input. 2015-02-06 Pedro Alves * gdb.threads/attach-many-short-lived-threads.c (SECONDS): New macro. (seconds_left, again): New globals. (main): Wait seconds_left in a 1-second sleep loop instead of sleeping 180 seconds. If 'again' is set, reset the seconds counter. * gdb.threads/attach-many-short-lived-threads.exp (test): Set 'again' in the inferior before detaching. Print the seconds left. (options): New global. (top level): Build program with -DTIMEOUT=$timeout. 2015-02-06 Pedro Alves * gdb.base/gdb-sigterm.c (main): Use the TIMEOUT define to determine how many seconds to pass to 'alarm'. * gdb.base/gdb-sigterm.exp (top level): Build program with -DTIMEOUT=$timeout. (do_test): Return success/failure indication. Add more verbose logging. Don't fail if 200 single steps are seen. Instead, fail when the test times out. (passes): New global. (top level): Break the testing loop if testing fails on any iteration. Use gdb_assert. 2015-02-04 Don Breazeal * gdb.base/info-os.c (shmid, semid, msqid): Make variables static and initialize them. (ipc_cleanup): New function. (main): Don't declare shmid, semid, and msqid. Add a call to atexit so that we call ipc_cleanup on exit. 2015-02-04 Pedro Alves * boards/native-extended-gdbserver.exp: Remove any target variant specifications from the board name before clearing the isremote flag from board_info. 2015-01-31 Doug Evans * gdb.base/maint.exp : Update expected output. 2015-01-31 Gary Benson * gdb.base/completion.exp: Disable completion limiting for existing tests. Add new tests to check completion limiting. * gdb.linespec/ls-errs.exp: Disable completion limiting. 2015-01-31 Doug Evans * gdb.ada/dyn_arrayidx.exp: Add additional_flags=-gnat12. 2015-01-31 Doug Evans * gdb.guile/scm-section-script.c: Add duplicate inlined section script entries. Duplicate file section script entries. * gdb.guile/scm-section-script.exp: Add tests for duplicate entries, inlined entries. Add test for safe-path rejection. * gdb.python/py-section-script.c: Add duplicate inlined section script entries. Duplicate file section script entries. * gdb.python/py-section-script.exp: Add tests for duplicate entries, inlined entries. Add test for safe-path rejection. 2015-01-29 Joel Brobecker * gdb.ada/disc_arr_bound: New testcase. 2015-01-29 Joel Brobecker * gdb.ada/mi_var_array: New testcase. 2015-01-27 Doug Evans * gdb.python/py-objfile.exp: Add tests for objfile.username. Add test for objfile.filename, objfile.username after objfile has been unloaded. 2015-01-26 Joel Brobecker * gdb.python/py-lookup-type.exp (test_lookup_type): Change the second test to print the name attribute of value returned by the call to gdb.lookup_type, and adjust the expected output accordingly. 2015-01-25 Mark Wielaard * gdb.arch/i386-bp_permanent.c (standard): New declaration. * gdb.base/disp-step-fork.c: Include unistd.h. * gdb.base/siginfo-obj.c: Include stdio.h. * gdb.base/siginfo-thread.c: Likewise. * gdb.mi/non-stop.c: Include unistd.h. * gdb.mi/nsthrexec.c: Include stdio.h. * gdb.mi/pthreads.c: Include unistd.h. * gdb.modula2/unbounded1.c (main): Declare returns int. * gdb.reverse/consecutive-reverse.c: Likewise. * gdb.threads/create-fail.c: Include unistd.h. * gdb.threads/killed.c: Likewise. * gdb.threads/linux-dp.c: Likewise. * gdb.threads/non-ldr-exc-1.c: Include stdio.h and string.h. * gdb.threads/non-ldr-exc-2.c: Likewise. * gdb.threads/non-ldr-exc-3.c: Likewise. * gdb.threads/non-ldr-exc-4.c: Likewise. * gdb.threads/pthreads.c: Include unistd.h. (main): Declare returns int. * gdb.threads/tls-main.c (foo): New declaration. * gdb.threads/watchpoint-fork-mt.c: Define _GNU_SOURCE. 2015-01-23 Simon Marchi * gdb.mi/mi-var-list-children-invalid-grandchild.c: New file. * gdb.mi/mi-var-list-children-invalid-grandchild.exp: New file. 2015-01-15 Mark Wielaard * gdb.base/noreturn-return.c: New file. * gdb.base/noreturn-return.exp: New file. * gdb.base/noreturn-finish.c: New file. * gdb.base/noreturn-finish.exp: New file. 2015-01-23 Pedro Alves * gdb.threads/continue-pending-after-query.c: New file. * gdb.threads/continue-pending-after-query.exp: New file. 2015-01-22 Anders Granlund Simon Marchi * gdb.base/statistics.exp: Assign spawn id to gdb_spawn_id. * gdb.base/valgrind-db-attach.exp: Same. * gdb.base/valgrind-infcall.exp: Same. * lib/mi-support.exp (default_mi_gdb_start): Same. * lib/prompt.exp (default_prompt_gdb_start): Same. * lib/gdb.exp (default_gdb_spawn): Same. (gdb_interact): New. 2015-01-22 Jan Kratochvil * gdb.compile/compile.exp (pointer to jit function): New test. 2015-01-17 Wei-cheng Wang * lib/gdb.exp (supports_process_record): Return true for powerpc*-*-linux*. (supports_reverse): Likewise. 2015-01-15 Don Breazeal * gdb.base/attach-pie-noexec.exp: Use can_spawn_for_attach instead of checking whether the target board is remote and use spawn_wait_for_attach instead of exec/sleep. * gdb.base/attach-twice.exp: Likewise. 2015-01-15 Joel Brobecker * gdb.ada/var_arr_attrs: New testcase. 2015-01-14 Pedro Alves Joel Brobecker PR gdb/17525 * gdb.base/bp-cmds-execution-x-script.c: New file. * gdb.base/bp-cmds-execution-x-script.exp: New file. * gdb.base/bp-cmds-execution-x-script.gdb: New file. 2015-01-14 Pedro Alves PR cli/17828 * gdb.base/batch-preserve-term-settings.c: New file. * gdb.base/batch-preserve-term-settings.exp: New file. 2015-01-13 Doug Evans * gdb.python/py-objfile.exp: Test gdb.lookup_objfile on symlinked binary. 2015-01-13 Joel Brobecker * Makefile.in (clean mostlyclean): Do not delete *.py. 2015-01-13 Joel Brobecker * gdb.python/py-lookup-type.exp: New file. 2015-01-12 Pedro Alves * gdb.python/py-prompt.exp: When the board can't spawn for attach, restore GDBFLAGS before returning. 2015-01-12 Jan Kratochvil * gdb.python/py-frame.exp (test Frame.read_register(rip)): Use is_amd64_regs_target and is_x86_like_target. 2015-01-11 Doug Evans * lib/dwarf.exp (Dwarf): Flag an error if a numeric attribute value is given without an explicit form. * gdb.dwarf2/arr-subrange.exp: Specify forms for all numeric attributes. * gdb.dwarf/corrupt.exp: Ditto. * gdb.dwarf2/enum-type.exp: Ditto. * gdb.trace/entry-values.exp: Ditto. * gdb.trace/unavailable-dwarf-piece.exp: Ditto. 2015-01-11 Doug Evans PR gdb/15830 * gdb.base/maint.exp: Remove references to "maint demangle". * gdb.cp/demangle.exp: Update. "maint demangle" -> "demangle". Add tests for explicitly specifying language to demangle. * gdb.dlang/demangle.exp: Ditto. 2015-01-09 Pedro Alves * gdb.threads/non-stop-fair-events.c: New file. * gdb.threads/non-stop-fair-events.exp: New file. 2015-01-09 Pedro Alves * gdb.base/annota1.exp (thread_test): Use srcfile and binfile from the global scope. Set a breakpoint after all threads are started rather than stepping over two source lines. Expect the prompt. * gdb.base/watch_thread_num.c (threads_started_barrier): New global. (NUM): Now 15. (main): Use threads_started_barrier to wait for all threads to start. Main thread no longer calls thread_function. Exit after 180 seconds. (loop): New function. (thread_function): Wait on threads_started_barrier barrier. Call 'loop' at each iteration. * gdb.base/watch_thread_num.exp: Continue to breakpoint after all threads have started, instead of hardcoding number of "next" steps. Use an access watchpoint instead of a write watchpoint. 2015-01-09 Pedro Alves * gdb.threads/ia64-sigill.c (threads_started_barrier): New global. (thread_func): Wait on barrier. (main): Wait for all threads to start before stopping GDB. * gdb.threads/siginfo-threads.c (threads_started_barrier): New global. (thread1_func, thread2_func): Wait on barrier. (main): Wait for all threads to start before stopping GDB. * gdb.threads/watchthreads-reorder.c (threads_started_barrier): New global. (thread1_func, thread2_func): Wait on barrier. (main): Wait for all threads to start before stopping GDB. 2015-01-09 Pedro Alves * gdb.threads/attach-many-short-lived-threads.c: New file. * gdb.threads/attach-many-short-lived-threads.exp: New file. 2014-01-09 Pedro Alves * gdb.threads/fork-thread-pending.exp: Switch to the main thread instead of to thread 2. * gdb.threads/signal-command-multiple-signals-pending.c (main): Add barrier around each pthread_create call instead of around all calls. * gdb.threads/signal-command-multiple-signals-pending.exp (test): Set a break on thread_function and have the child threads hit it one at at a time. 2015-01-09 Pedro Alves * lib/gdb.exp (can_spawn_for_attach): New procedure. (spawn_wait_for_attach): Error out if can_spawn_for_attach returns false. * gdb.base/attach.exp: Use can_spawn_for_attach instead of checking whether the target board is remote. * gdb.multi/multi-attach.exp: Likewise. * gdb.python/py-sync-interp.exp: Likewise. * gdb.server/ext-attach.exp: Likewise. * gdb.python/py-prompt.exp: Use can_spawn_for_attach before the tests that need to attach, instead of checking whether the target board is remote at the top of the file. 2015-01-08 Yao Qi * gdb.trace/entry-values.exp: Set call_insn for MIPS target. 2015-01-07 Jan Kratochvil Fix testcase compilation. * gdb.arch/i386-avx512.exp (comp_flags): Remove /common. 2015-01-06 Joel Brobecker * gdb.python/py-type.exp: Add a couple test about empty array creation, and negative-length array creation. 2015-01-02 Doug Evans * gdb.cp/nsalias.exp: Fix output of external/declaration flags. 2015-01-02 Doug Evans * gdb.dwarf2/dw4-sig-types.exp: Also pass -fdebug-types-section to gcc. 2014-12-29 Yao Qi * gdb.trace/entry-values.exp: Update comments. Rename variable bar_call_foo to returned_from_foo. 2014-12-20 Mihail-Marian Nistor PR gdb/17394 * gdb.linespec/break-asm-file.c: New file. * gdb.linespec/break-asm-file.exp: New file. * gdb.linespec/break-asm-file0.s: New file. * gdb.linespec/break-asm-file1.s: New file. 2014-12-18 Nigel Stephens Maciej W. Rozycki * gdb.base/float.exp: Handle the new output from "info float" on MIPS targets. 2014-12-17 Jan Kratochvil Fix MinGW compilation. * gdb.compile/compile-ops.exp: Update untested message if !skip_compile_feature_tests. * gdb.compile/compile-setjmp.exp: Likewise. * gdb.compile/compile-tls.exp: Likewise. * gdb.compile/compile.exp: Likewise. * lib/gdb.exp (skip_compile_feature_tests): Check also "Command not supported on this host". 2014-12-16 Doug Evans * boards/stabs.exp: New file. 2014-12-16 Andreas Arnez * gdb.base/completion.exp: Adjust to format changes of "maint print user-registers". 2014-12-16 Catalin Udma PR server/17457 * gdb.arch/aarch64-fp.c: New file. * gdb.arch/aarch64-fp.exp: New file. 2014-12-15 Sergio Durigan Junior Merge dg-extract-results.{sh,py} from GCC upstream (r210243, r210637, r210913, r211666, r215400, r215817). 2014-05-08 Richard Sandiford * dg-extract-results.py: New file. * dg-extract-results.sh: Use it if the environment seems suitable. 2014-05-20 Richard Sandiford * dg-extract-results.py (parse_run): Handle warnings that are printed before a test harness is run. 2014-05-25 Richard Sandiford * dg-extract-results.py (Named): Remove __cmp__ method. (output_variation): Use a key to sort variation.harnesses. 2014-06-14 Richard Sandiford * dg-extract-results.py: For Python 3, force sys.stdout to handle surrogate escape sequences. (safe_open): New function. (output_segment, main): Use it. 2014-09-19 Segher Boessenkool * dg-extract-results.py (Prog.result_re): Include options in test name. 2014-10-02 Segher Boessenkool * dg-extract-results.py (output_variation): Always sort if do_sum. 2014-12-15 Simon Marchi * lib/gdb.exp (default_gdb_start): After starting gdb, loop as long as we get pagination notifications. 2014-12-15 Jason Merrill * Makefile.in (check-gdb.%): Restore. * README: Mention it. 2014-12-13 Joel Brobecker * gdb.ada/str_uninit: New testcase. 2014-12-13 Jan Kratochvil PR symtab/17642 * gdb.base/vla-stub-define.c: New file. * gdb.base/vla-stub.c: New file. * gdb.base/vla-stub.exp: New file. 2014-12-12 Phil Muldoon Jan Kratochvil Tom Tromey * configure.ac: Add gdb.compile/. * configure: Regenerate. * gdb.compile/Makefile.in: New file. * gdb.compile/compile-ops.exp: New file. * gdb.compile/compile-ops.c: New file. * gdb.compile/compile-tls.c: New file. * gdb.compile/compile-tls.exp: New file. * gdb.compile/compile-constvar.S: New file. * gdb.compile/compile-constvar.c: New file. * gdb.compile/compile-mod.c: New file. * gdb.compile/compile-nodebug.c: New file. * gdb.compile/compile-setjmp-mod.c: New file. * gdb.compile/compile-setjmp.c: New file. * gdb.compile/compile-setjmp.exp: New file. * gdb.compile/compile-shlib.c: New file. * gdb.compile/compile.c: New file. * gdb.compile/compile.exp: New file. * lib/gdb.exp (skip_compile_feature_tests): New proc. 2014-12-12 Tom Tromey * lib/dwarf.exp (_location): Ignore blank lines. Allow comments. Handle DW_OP_pick, DW_OP_skip, DW_OP_bra. 2014-12-12 Doug Evans * lib/gdb-python.exp (get_python_valueof): New function. * gdb.python/py-objfile.exp: Add tests for gdb.lookup_objfile. 2014-12-12 Andreas Arnez * gdb.base/completion.exp: Add test for completion of "info registers ". 2014-12-12 Maciej W. Rozycki * gdb.base/func-ptrs.c: New file. * gdb.base/func-ptrs.exp: New file. 2014-12-10 Simon Marchi PR breakpoints/17012 * gdb.base/dprintf-detach.c: New file. * gdb.base/dprintf-detach.exp: New file. 2014-12-10 Simon Marchi * gdb.trace/qtro.exp: Replace gdbserver detection code by... * lib/gdb.exp (target_is_gdbserver): New procedure. 2014-12-08 Doug Evans * gdb.python/py-objfile.exp: Add tests for objfile.owner. 2014-12-05 Yao Qi * gdb.guile/scm-error.exp: Remove the third argument to gdb_remote_download. * gdb.guile/scm-frame-args.exp: Likewise. * gdb.guile/scm-section-script.exp: Likewise. 2014-12-05 Yao Qi * gdb.arch/i386-bp_permanent.exp: Use standard_testfile. 2014-12-04 Doug Evans * gdb.python/py-objfile.exp: Add tests for objfile.add_separate_debug_file. 2014-12-04 Doug Evans * lib/gdb.exp (get_build_id): New function. (build_id_debug_filename_get): Rewrite to use it. * gdb.python/py-objfile.exp: Add test for objfile.build_id. 2014-12-04 Maciej W. Rozycki * gdb.cp/expand-psymtabs-cxx.exp: Accept any address of `method(long)', not just 0x0. * gdb.cp/nsalias.exp: Align code labels to 4. * gdb.dwarf2/dw2-canonicalize-type.S (main): Expand to 4-bytes. * gdb.dwarf2/dw2-empty-pc-range.S (main): Likewise. * gdb.dwarf2/pr11465.S (_ZN1N1cE): Likewise. * gdb.dwarf2/dw2-case-insensitive.c (START_INSNS): New macro. (cu_text_start, FUNC_lang_start): Use `START_INSNS'. * gdb.dwarf2/dw2-stack-boundary.exp: Accept noise in complaints. 2014-12-02 Doug Evans PR symtab/17602 * gdb.cp/anon-ns.cc: Move guts of this file to ... * gdb.cp/anon-ns2.cc: ... here. New file. * gdb.cp/anon-ns.exp: Update. 2014-12-02 Nick Bull * gdb.python/py-events.py (inferior_call_handler): New. (register_changed_handler, memory_changed_handler): New. (test_events.invoke): Register new handlers. * gdb.python/py-events.exp: Add tests for inferior call, memory_changed and register_changed events. 2014-12-02 Andreas Arnez * gdb.base/execl-update-breakpoints.exp: Specify the link address with '-Ttext-segment' instead of '-Ttext'. Fall back to '-Ttext' if the linker doesn't understand this. 2014-12-01 Simon Marchi * gdb.python/python.exp: Change expected reply to help(). 2014-12-01 Yao Qi * configure.ac: Remove AC_ARG_ENABLE for gdbtk. Don't invoke AC_CONFIG_SUBDIRS(gdb.gdbtk). * configure: Re-generated. 2014-11-28 Siva Chandra Reddy * gdb.cp/chained-calls.cc: New file. * gdb.cp/chained-calls.exp: New file. * gdb.cp/smartp.exp: Remove KFAIL for "p c2->inta". 2014-11-28 Simon Marchi * gdb.ada/py_range.exp: Add parentheses to python calls to print. * gdb.dwarf2/symtab-producer.exp: Same. * gdb.gdb/python-interrupts.exp: Same. * gdb.gdb/python-selftest.exp: Same. * gdb.python/py-linetable.exp: Same. * gdb.python/py-type.exp: Same. * gdb.python/py-value-cc.exp: Same. * gdb.python/py-value.exp: Same. 2014-11-28 Yao Qi * gdb.base/break-probes.exp: Match library name prefixed with sysroot. 2014-11-27 Simon Marchi * gdb.python/py-linetable.exp: Escape properly sorted(fset) test expected output. Add parentheses for the call to print. Remove L suffix from integers. 2014-11-26 Doug Evans * gdb.dwarf2/dw2-op-out-param.S: Fix comment. 2014-11-22 Yao Qi * gdb.trace/entry-values.c: Remove asms. (foo): Add foo_label. (bar): Add bar_label. * gdb.trace/entry-values.exp: Remove code computing foo's length and bar's length. (Dwarf::assemble): Invoke function_range for bar and use MACRO_AT_func for foo. 2014-11-22 Yao Qi * gdb.dwarf2/dw2-compdir-oldgcc.S: Define label .Lgcc42_procstart and .Lgcc43_procstart. Use .Lgcc42_procstart instead of gcc42. Use .Lgcc43_procstart instead of gcc43. 2014-11-21 Joel Brobecker * gdb.ada/n_arr_bound: New testcase. 2014-11-20 Sergio Durigan Junior PR breakpoints/10737 * gdb.base/catch-syscall.exp (do_syscall_tests): Call test_catch_syscall_multi_arch. (test_catch_syscall_multi_arch): New function. 2014-11-20 Doug Evans * gdb.base/maint.exp: Update expected output. 2014-11-19 Andreas Arnez * gdb.base/bp-permanent.c (NOP): Define as 2-byte instead of 4-byte instruction on S390. 2014-11-19 Joel Brobecker * gdb.ada/arr_arr: New testcase. 2014-11-19 Joel Brobecker * gdb.ada/pkd_arr_elem: New Testcase. 2014-11-18 Luis Machado * gdb.reverse/break-precsave: Expect completion message for core file reads. * gdb.reverse/consecutive-precsave.exp: Likewise. * gdb.reverse/finish-precsave.exp: Likewise. * gdb.reverse/i386-precsave.exp: Likewise. * gdb.reverse/machinestate-precsave.exp: Likewise. * gdb.reverse/sigall-precsave.exp: Likewise. * gdb.reverse/solib-precsave.exp: Likewise. * gdb.reverse/step-precsave.exp: Likewise. * gdb.reverse/until-precsave.exp: Likewise. * gdb.reverse/watch-precsave.exp: Likewise. 2014-11-17 Andreas Arnez * gdb.base/bp-permanent.c: Include unistd.h. * gdb.python/py-framefilter-mi.c (main): Add return type. * gdb.python/py-framefilter.c (main): Likewise. * gdb.trace/actions-changed.c (main): Likewise. 2014-11-17 Andreas Arnez * gdb.mi/until.c: Add eye-catchers. * gdb.mi/mi-until.exp: Refer to eye-catchers instead of literal line numbers. 2014-11-17 Andreas Arnez * gdb.base/condbreak.exp: Drop references to removed non-prototype function header variants in break1.c. * gdb.base/ena-dis-br.exp: Likewise. * gdb.base/hbreak2.exp: Likewise. * gdb.reverse/until-precsave.exp: Drop references to removed non-prototype function header variants in ur1.c. * gdb.reverse/until-reverse.exp: Likewise. 2014-11-17 Petr Machata * lib/dwarf.exp (Dwarf::cu, Dwarf::tu): Emit ${_cu_offset_size} bytes abbrev offset. 2014-11-15 Doug Evans PR symtab/17559 * gdb.base/line-symtabs.exp: New file. * gdb.base/line-symtabs.c: New file. * gdb.base/line-symtabs.h: New file. 2014-11-14 Yao Qi * gdb.dwarf2/dw2-ifort-parameter.c: Remove inline asm. (func): Add label func_label. * gdb.dwarf2/dw2-ifort-parameter.exp (Dwarf::assemble): Replace low_pc and high_pc with MACRO_AT_range. Replace name, low_pc and high_pc with MACRO_AT_func. 2014-11-14 Yao Qi * gdb.dwarf2/implptr-optimized-out.exp (Dwarf::assemble): Replace name, low_pc and high_pc with MACRO_AT_func. 2014-11-14 Yao Qi * gdb.dwarf2/implptr-optimized-out.exp: Use Dwarf::assemble to produce debug information. * gdb.dwarf2/implptr-optimized-out.S: Removed. 2014-11-14 Yao Qi * gdb.dwarf2/dwz.exp: Remove the code to compile main.c to object and get function length. (Dwarf::assemble): Replace name, low_pc and high_pc attributes with MACRO_AT_func. (top-level): Replace gdb_compile and clean_restart with prepare_for_testing. * gdb.dwarf2/main.c (main): Add label main_label. 2014-11-14 Yao Qi * lib/dwarf.exp (function_range): New procedure. (Dwarf::_handle_macro_at_func): New procedure. (Dwarf::_handle_macro_at_range): New procedure. (Dwarf): Handle MACRO_AT_func and MACRO_AT_range. 2014-11-14 Yao Qi * lib/dwarf.exp (_handle_DW_TAG): Move some code to ... (_handle_attribute): New procedure. 2014-11-13 Andreas Arnez * gdb.ada/cond_lang/foo.c (callme): Add return type. * gdb.base/call-sc.c (zed): Likewise. * gdb.base/checkpoint.c (main): Likewise. * gdb.base/dump.c (main): Likewise. * gdb.base/gcore.c (main): Likewise. * gdb.base/huge.c (main): Likewise. * gdb.base/multi-forks.c (main): Likewise. * gdb.base/pr10179-a.c (main): Likewise. * gdb.base/savedregs.c (main): Likewise. * gdb.base/sigaltstack.c (main): Likewise. * gdb.base/siginfo.c (main): Likewise. * gdb.base/structs.c (zed): Likewise. * gdb.mi/mi-stack.c (callee3, callee2, callee1, main): Likewise. * gdb.mi/mi-syn-frame.c (main): Likewise. * gdb.mi/until.c (foo, main): Likewise. * gdb.base/global-var-nested-by-dso.c (b_main, c_main): Declare. * gdb.base/solib-weak.c (foo): Declare. * gdb.base/attach-twice.c: Include stdio.h. * gdb.base/weaklib1.c: Likewise. * gdb.base/weaklib2.c: Likewise. * gdb.base/catch-signal-fork.c: Include stdio.h and sys/wait.h. * gdb.mi/mi-condbreak-call-thr-state-mt.c: Include stdio.h and unistd.h. * gdb.base/attach-pie-misread.c: Include stdlib.h. * gdb.mi/mi-exit-code.c: Likewise. * gdb.base/break-interp-lib.c: Include string.h. * gdb.base/coremaker.c: Likewise. * gdb.base/testenv.c: Likewise. * gdb.python/py-finish-breakpoint.c: Likewise. * gdb.base/inferior-died.c: Include sys/wait.h. * gdb.base/fileio.c: Include time.h. * gdb.base/async-shell.c: Include unistd.h. * gdb.base/dprintf-non-stop.c: Likewise. * gdb.base/info-os.c: Likewise. * gdb.mi/mi-console.c: Likewise. * gdb.mi/watch-nonstop.c: Likewise. * gdb.python/py-events.c: Likewise. * gdb.base/async.c (baz): Move up before its invocation. * gdb.base/code_elim2.c (my_global_func): Likewise. * gdb.base/skip-solib-lib.c (multiply): Likewise. * gdb.base/advance.c (func2): Likewise. 2014-11-13 Andreas Arnez * gdb.base/annota1.c: Remove #ifdef PROTOTYPES, keep prototyped variant. * gdb.base/annota3.c: Likewise. * gdb.base/async.c: Likewise. * gdb.base/average.c: Likewise. * gdb.base/call-ar-st.c: Likewise. * gdb.base/call-rt-st.c: Likewise. * gdb.base/call-sc.c: Likewise. * gdb.base/call-strs.c: Likewise. * gdb.base/ending-run.c: Likewise. * gdb.base/execd-prog.c: Likewise. * gdb.base/exprs.c: Likewise. * gdb.base/foll-exec.c: Likewise. * gdb.base/foll-fork.c: Likewise. * gdb.base/foll-vfork.c: Likewise. * gdb.base/funcargs.c: Likewise. * gdb.base/gcore.c: Likewise. * gdb.base/jump.c: Likewise. * gdb.base/langs0.c: Likewise. * gdb.base/langs1.c: Likewise. * gdb.base/langs2.c: Likewise. * gdb.base/mips_pro.c: Likewise. * gdb.base/nodebug.c: Likewise. * gdb.base/opaque0.c: Likewise. * gdb.base/opaque1.c: Likewise. * gdb.base/recurse.c: Likewise. * gdb.base/run.c: Likewise. * gdb.base/scope0.c: Likewise. * gdb.base/scope1.c: Likewise. * gdb.base/setshow.c: Likewise. * gdb.base/setvar.c: Likewise. * gdb.base/shmain.c: Likewise. * gdb.base/shr1.c: Likewise. * gdb.base/shr2.c: Likewise. * gdb.base/sigall.c: Likewise. * gdb.base/signals.c: Likewise. * gdb.base/so-indr-cl.c: Likewise. * gdb.base/solib2.c: Likewise. * gdb.base/structs.c: Likewise. * gdb.base/sum.c: Likewise. * gdb.base/vforked-prog.c: Likewise. * gdb.base/watchpoint.c: Likewise. * gdb.reverse/shr2.c: Likewise. * gdb.reverse/until-reverse.c: Likewise. * gdb.reverse/ur1.c: Likewise. * gdb.reverse/watch-reverse.c: Likewise. 2014-11-13 Andreas Arnez * gdb.base/sepdebug.c: Remove #ifdef PROTOTYPES, keep prototyped variant. * gdb.base/sepdebug.exp: Drop references to removed code. 2014-11-13 Andreas Arnez * gdb.base/list0.h: Remove #ifdef PROTOTYPES, keep prototyped variant. Preserve original line numbering. * gdb.base/list1.c: Likewise. 2014-11-13 Andreas Arnez * gdb.base/break.c: Remove #ifdef PROTOTYPES, keep prototyped variant. * gdb.base/break1.c: Likewise. * gdb.base/break.exp: Drop references to removed code. 2014-11-13 Andreas Arnez * gdb.base/solib1.c: Remove #ifdef PROTOTYPES, keep prototyped variant. 2014-11-13 Andreas Arnez * gdb.base/callfuncs.exp (perform_all_tests): Re-indent. 2014-11-13 Andreas Arnez * gdb.base/callfuncs.exp: Remove 'prototypes' variable. Move main logic into perform_all_tests() and invoke it with and without function header prototypes. (do_function_calls): Remove conditional XFAIL for PR 5318. (rerun_and_prepare): Remove duplicate code. (perform_all_tests): New. Main logic moved here. 2014-11-13 Andreas Arnez * gdb.base/callfuncs.c (t_float_many_args): Fix syntax error in code guarded by #ifdef NO_PROTOTYPES. (t_double_many_args): Likewise. (DEF_FUNC_MANY_ARGS_1): Likewise. (DEF_FUNC_VALUES_1): Likewise. (t_structs_ldc): Renamed from t_structs_fc in conditional code guarded by #ifdef PROTOTYPES. 2014-11-13 Andreas Arnez * gdb.mi/mi-console.c: Add eye-catcher. * gdb.mi/mi-console.exp (semihosted_string): Refer to eye-catcher instead of literal line number. 2014-11-13 Andreas Arnez * gdb.base/shr2.c: Add eye-catcher. * gdb.base/shlib-call.exp: Refer to eye-catcher instead of literal line number. 2014-11-13 Andreas Arnez * gdb.base/jump.c: Add eye-catchers. * gdb.base/jump.exp: Refer to eye-catchers instead of literal line numbers. 2014-11-13 Andreas Arnez * gdb.base/execd-prog.c: Add eye-catchers. * gdb.base/foll-exec.c: Likewise. * gdb.base/foll-exec.exp: Refer to eye-catchers instead of literal line numbers. 2014-11-13 Andreas Arnez * gdb.base/ending-run.c: Add eye-catchers. * gdb.base/ending-run.exp: Refer to eye-catchers instead of literal line numbers. 2014-11-13 Andreas Arnez * gdb.base/call-rt-st.c: Add eye-catchers. * gdb.base/call-rt-st.exp: Refer to eye-catchers instead of literal line numbers. 2014-11-13 Andreas Arnez * gdb.base/call-ar-st.c: Add eye-catchers. * gdb.base/call-ar-st.exp: Refer to eye-catchers instead of literal line numbers. 2014-11-13 Andreas Arnez * gdb.base/average.c: Add eye-catchers. * gdb.base/sum.c: Likewise. * gdb.base/dbx.exp: Use eye-catchers to determine line numbers for regexps dynamically. 2014-11-13 Andreas Arnez * gdb.base/solib1.c: Add eye-catchers. * gdb.base/so-impl-ld.exp: Match against eye-catchers instead of literal line numbers. 2014-11-12 Pedro Alves * gdb.threads/leader-exit.exp: Test sending ctrl-c works after the leader has exited. 2014-11-12 Pedro Alves * gdb.arch/i386-bp_permanent.c: New file. * gdb.arch/i386-bp_permanent.exp: Don't skip on x86_64. (srcfile): Set to i386-bp_permanent.c. (top level): Adjust to work in both 32-bit and 64-bit modes. Test that stepi does not execute the 'leave' instruction, instead of testing it does execute. * gdb.base/bp-permanent.c: New file. * gdb.base/bp-permanent.exp: New file. 2014-11-10 Doug Evans PR symtab/17564 * gdb.base/symtab-search-order.exp: New file. * gdb.base/symtab-search-order.c: New file. * gdb.base/symtab-search-order-1.c: New file. * gdb.base/symtab-search-order-shlib-1.c: New file. 2014-11-07 Pedro Alves PR gdb/17511 * gdb.base/sigstep.exp (in_handler_map) : xfail i?86-*-linux*. 2014-11-03 Siva Chandra Reddy PR c++/17494 * gdb.cp/pr17494.cc: New file. * gdb.cp/pr17494.exp: New file. 2014-11-02 Yao Qi * gdb.python/python.exp: Get working directory and match the output of "set extended-prompt \\w " with it. 2014-10-30 Doug Evans * gdb.python/py-objfile.exp: Add tests for setting random attributes in objfiles. * gdb.python/py-progspace.exp: Add tests for setting random attributes in progspaces. 2014-10-30 Janis Johnson * gdb.base/fullpath-expand.exp: Skip for a remote host. * gdb.base/realname-expand.exp: Likewise. * gdb.linespec/macro-relative.exp: Likewise. 2014-10-29 Pedro Alves PR gdb/17408 * gdb.threads/schedlock.c (some_function): New function. (call_function): New global. (MAYBE_CALL_SOME_FUNCTION): New macro. (thread_function): Call it. * gdb.threads/schedlock.exp (get_args): Add description parameter, and use it instead of a global counter. Adjust all callers. (get_current_thread): Use "find current thread" for test message here rather than having all callers pass down the same string. (goto_loop): New procedure, factored out from ... (my_continue): ... this. (step_ten_loops): Change parameter from test message to command to use. Adjust. (list_count): Delete global. (check_result): New procedure, factored out from duplicate top level code. (continue tests): Wrap in with_test_prefix. (test_step): New procedure, factored out from duplicate top level code. (top level): Test "step" in combination with all scheduler-locking modes. Test "next" in combination with all scheduler-locking modes, and in combination with stepping over a function call or not. * gdb.threads/next-bp-other-thread.c: New file. * gdb.threads/next-bp-other-thread.exp: New file. 2014-10-29 Pedro Alves PR python/17372 * gdb.python/python.exp: Test a multi-line command that spawns interactive Python. * gdb.base/multi-line-starts-subshell.exp: New file. 2014-10-29 Yao Qi * gdb.base/fileio.exp: Make directories on host. 2014-10-29 Yao Qi * gdb.base/fileio.c (test_write): Close the file. 2014-10-28 Pedro Alves PR gdb/12623 * gdb.base/sigstep.c (no_handler): New global. (main): If 'no_handler is true, set the signal handlers to SIG_IGN. * gdb.base/sigstep.exp (breakpoint_over_handler): Add with_sw_watch and no_handler parameters. Handle them. (top level) : Add a test axis for testing with a software watchpoint, and another for testing with the signal handler set to SIG_IGN. * gdb.base/step-sw-breakpoint-adjust-pc.c: New file. * gdb.base/step-sw-breakpoint-adjust-pc.exp: New file. 2014-10-28 Pedro Alves PR gdb/17511 * gdb.base/sigstep.c (handler): Add a few more writes to 'done'. * gdb.base/sigstep.exp (other_handler_location): New global. (advance): Support stepping into the signal handler, and running commands while in the handler. (in_handler_map): New global. (top level): In the advance test, add combinations for getting into the handler with stepping commands, and for running commands in the handler. Add comment descripting the advancei tests. 2014-10-28 Pedro Alves * gdb.base/sigstep.exp: Use build_executable instead of prepare_for_testing. (top level): Move code that starts GDB, runs to main and creates a display to ... (restart): ... this new procedure. (top level): Move backtrace from signal handler test to ... (validate_backtrace): ... this new procedure. (advance, advancei): Rename parameter from 'i' to 'cmd'. Use with_test_prefix. Always restart GDB. (skip_to_handler): Rename parameter from 'i' to 'cmd'. Use with_test_prefix. Always restart GDB. No need to delete breakpoints after the test. (test_skip_handler): Remove prefix parameter. (skip_over_handler, breakpoint_to_handler) (breakpoint_to_handler_entry, breakpoint_over_handler): Rename parameter from 'i' to 'cmd'. Use with_test_prefix. Always restart GDB. No need to delete breakpoints after the test. (top level): Use foreach to call the test procedures with different commands. 2014-10-28 Pedro Alves * gdb.base/sigaltstack.exp: Update to use Bugzilla bug numbers instead of GNATS numbers. * gdb.base/sigbpt.exp: Likewise. * gdb.base/siginfo.exp: Likewise. * gdb.base/sigstep.exp: Likewise. 2014-10-27 Pedro Alves * gdb.base/sigstep.c (dummy): New global. (main): Issue a couple writes to the new global. * gdb.base/sigstep.exp (get_next_pc, test_skip_handler): New procedures. (skip_over_handler): Use test_skip_handler. (top level): Call skip_over_handler for stepi and nexti too. (breakpoint_over_handler): Use test_skip_handler. (top level): Call breakpoint_over_handler for stepi and nexti too. 2014-10-27 Yao Qi * gdb.trace/tfile.c (adjust_function_address) [__powerpc64__ && _CALL_ELF != 2]: Get function address from function descriptor. 2014-10-24 Don Breazeal * gdb.base/foll-fork.exp (test_follow_fork, catch_fork_child_follow): Check for updated fork messages emitted from infrun.c. * gdb.base/foll-vfork.exp (vfork_parent_follow_through_step, vfork_parent_follow_to_bp, vfork_and_exec_child_follow_to_main_bp, vfork_and_exec_child_follow_through_step): Check for updated vfork messages emitted from infrun.c. 2014-10-24 Pedro Alves * gdb.base/corefile.exp: Remove references to ultrix. * gdb.base/interrupt.exp: Likewise. * gdb.base/whatis.exp: Likewise. * gdb.gdb/selftest.exp: Likewise. * gdb.threads/manythreads.exp: Likewise. * gdb.threads/print-threads.exp: Likewise. * gdb.threads/pthreads.exp:: Likewise. * gdb.threads/schedlock.exp: Likewise. 2014-10-24 Siva Chandra Reddy * gdb.cp/non-trivial-retval.cc: Add a test case. * gdb.cp/non-trivial-retval.exp: Add a test. 2014-10-20 Yao Qi * gdb.python/py-objfile-script-gdb.py.in: Rename it to ... * gdb.python/py-objfile-script-gdb.py: New file. * gdb.python/py-objfile-script.exp: Update reference to py-objfile-script-gdb.py.in. Use gdb_remote_donwload instead of remote_download. Remove the dest file. 2014-10-20 Yao Qi * gdb.base/checkpoint.exp: Don't remove file copied on host. * gdb.base/step-line.exp: Likewise. * gdb.dwarf2/dw2-anonymous-func.exp: Likewise. * gdb.dwarf2/dw2-basic.exp: Likewise. * gdb.dwarf2/dw2-compressed.exp: Likewise. * gdb.dwarf2/dw2-filename.exp: Likewise. * gdb.dwarf2/dw2-intercu.exp: Likewise. * gdb.dwarf2/dw2-intermix.exp: Likewise. * gdb.dwarf2/dw2-producer.exp: Likewise. * gdb.dwarf2/mac-fileno.exp: Likewise. * gdb.python/py-frame-args.exp: Likewise. * gdb.python/py-framefilter.exp: Likewise. * gdb.python/py-mi.exp: Likewise. * gdb.python/py-objfile-script.exp: Likewise * gdb.python/py-pp-integral.exp: Likewise. * gdb.python/py-pp-re-notag.exp: Likewise. * gdb.python/py-prettyprint.exp: Likewise. * gdb.python/py-section-script.exp: Likewise. * gdb.python/py-typeprint.exp: Likewise. * gdb.python/py-xmethods.exp: Likewise. * gdb.stabs/weird.exp: Likewise. * gdb.xml/tdesc-regs.exp: Likewise. 2014-10-18 Kwok Cheung Yeung * gdb.dwarf2/dw2-dir-file-name.exp (addr_len): New. (out_cu): Use addr_len for the size of addresses. (out_line): Likewise. Size DW_LNE_set_address instruction according to addr_len. * gdb.dwarf2/dw2-dir-file-name.c (START_INSNS): New. (FUNC): Add START_INSNS to definition. 2014-10-18 Yao Qi * gdb.base/argv0-symlink.exp: Check argv[0] value if gdb_has_argv0 return true. * gdb.guile/scm-value.exp (test_value_in_inferior): Don't check [target_info exists noargs], check [gdb_has_argv0] instead. * gdb.python/py-value.exp (test_value_in_inferior): Likewise. * lib/gdb.exp (gdb_has_argv0, gdb_has_argv0_1): New procedures. 2014-10-17 Doug Evans * gdb.python/py-events.exp: Update expected output for clear_objfiles event. * gdb.python/py-events.py: Add clear_objfiles event. 2014-10-17 Doug Evans * gdb.python/py-objfile.exp: Test progspace attribute. 2014-10-17 Luis Machado * gdb.guile/scm-breakpoint.exp: Do not assume any directory separators when matching source file paths. * gdb.python/py-breakpoint.exp: Likewise. * gdb.reverse/break-precsave.exp: Likewise. * gdb.reverse/break-reverse.exp: Likewise. * gdb.reverse/consecutive-precsave.exp: Likewise. * gdb.reverse/finish-precsave.exp: Likewise. * gdb.reverse/finish-reverse-bkpt.exp: Likewise. * gdb.reverse/finish-reverse.exp: Likewise. * gdb.reverse/i386-precsave.exp: Likewise. * gdb.reverse/i387-env-reverse.exp: Likewise. * gdb.reverse/i387-stack-reverse.exp: Likewise. * gdb.reverse/machinestate-precsave.exp: Likewise. * gdb.reverse/machinestate.exp: Likewise. * gdb.reverse/sigall-precsave.exp: Likewise. * gdb.reverse/solib-precsave.exp: Likewise. * gdb.reverse/step-precsave.exp: Likewise. * gdb.reverse/until-precsave.exp: Likewise. * gdb.reverse/watch-precsave.exp: Likewise. * gdb.reverse/watch-reverse.exp: Likewise. 2014-10-17 Yao Qi * lib/gdb.exp (gdb_skip_xml_test): Copy trivial.xml to host. * gdb.xml/tdesc-regs.exp: Copy single-reg.xml to host. 2014-10-17 Pedro Alves PR gdb/17471 * gdb.base/bg-execution-repeat.c: New file. * gdb.base/bg-execution-repeat.exp: New file. 2014-10-17 Pedro Alves PR gdb/17300 * gdb.base/continue-all-already-running.c: New file. * gdb.base/continue-all-already-running.exp: New file. 2014-10-17 Pedro Alves PR gdb/17472 * gdb.base/annota-input-while-running.c: New file. * gdb.base/annota-input-while-running.exp: New file. 2014-10-17 Pedro Alves * gdb.base/callfuncs.exp: emove references to osf. * gdb.base/sigall.exp: Likewise. * gdb.gdb/selftest.exp: Likewise. * gdb.hp/gdb.base-hp/callfwmall.exp: Likewise. * gdb.mi/non-stop.c: Likewise. * gdb.mi/pthreads.c: Likewise. * gdb.reverse/sigall-precsave.exp: Likewise. * gdb.reverse/sigall-reverse.exp: Likewise. * gdb.threads/pthreads.c: Likewise. * gdb.threads/pthreads.exp: Likewise. 2014-10-17 Yao Qi * gdb.base/commands.exp (gdbvar_complex_if_while_test): Don't check 'target_info exists noargs'. (test_command_prompt_position): Likewise. (progvar_simple_if_test): Don't check 'target_info exists noargs'. Remove "set args". (progvar_simple_while_test): Likewise. (progvar_complex_if_while_test): Likewise. (if_while_breakpoint_command_test): Likewise. (infrun_breakpoint_command_test): Likewise. (breakpoint_command_test): Likewise. (watchpoint_command_test): Likewise. (bp_deleted_in_command_test): Likewise. (temporary_breakpoint_commands): Likewise. 2014-10-16 Yao Qi * gdb.base/remotetimeout.exp: Remove noargs checking. 2014-10-15 Pedro Alves PR breakpoints/9649 * gdb.base/breakpoint-in-ro-region.c (main): Add more instructions. * gdb.base/breakpoint-in-ro-region.exp (probe_target_hardware_step): New procedure. (top level): Probe hardware stepping and hardware breakpoint support. Test stepping through a read-only region, with both "breakpoint auto-hw" on and off and both "always-inserted" on and off. 2014-10-15 Iain Buclaw * gdb.dlang/demangle.exp: Update for demangling changes. 2014-10-15 Siva Chandra Reddy * gdb.cp/non-trivial-retval.cc: Add new test cases. * gdb.cp/non-trivial-retval.exp: Add new tests. 2014-10-15 Siva Chandra Reddy PR c++/13403 PR c++/15154 * gdb.cp/non-trivial-retval.cc: New file. * gdb.cp/non-trivial-retval.exp: New file. 2014-10-15 Yao Qi * gdb.python/py-parameter.exp: Don't match $srcdir/$subdir on remote host. 2014-10-15 Yao Qi * gdb.python/py-symbol.exp: Match file base name if host is remote, otherwise match file name with dir name. * gdb.python/py-symtab.exp: Likewise. * gdb.python/python.exp: Likewise. 2014-10-15 Yao Qi * gdb.python/py-symbol.exp: Remove trailing ".*" in the pattern. * gdb.python/py-symtab.exp: Likewise. * gdb.python/python.exp: Remove trailing ".*". Fix typo locationn. 2014-10-14 Joel Brobecker * gdb.ada/addr_arith: New testcase. 2014-10-14 Maciej W. Rozycki * gdb.dwarf2/dw2-case-insensitive-debug.S: Handle 64-bit pointers. * gdb.dwarf2/dw2-case-insensitive.exp: Update accordingly. * gdb.dwarf2/dw2-skip-prologue.S: Handle 64-bit pointers. * gdb.dwarf2/dw2-skip-prologue.exp: Update accordingly. 2014-10-14 Sergio Durigan Junior * gdb.arch/stap-eval-lang-ada.S: Likewise. * gdb.arch/stap-eval-lang-ada.c: Likewise. * gdb.arch/stap-eval-lang-ada.exp: New file. 2014-10-14 Yao Qi * gdb.mi/mi-var-child.c (nothing1): New function. (nothing2): New function. (do_children_tests): Set function pointers by nothing1 and nothing2. * gdb.mi/mi-var-child.exp: Step over new added statements. Update test to match the new output. * gdb.mi/var-cmd.c (nothing1): New function. (nothing2): New function. (do_children_tests): Set function pointers by nothing1 and nothing2. * gdb.mi/mi-var-display.exp: Update test to match output. Step to the line specified by $line_dct_nothing. Increase the number of lines to step. 2014-10-14 Yao Qi * gdb.mi/mi-var-child.exp: Use mi_varobj_update to simplify tests. * gdb.mi/mi2-var-child.exp: Likewise. 2014-10-13 Doug Evans * gdb.python/py-objfile.exp: Change name of file name test. 2014-10-13 Doug Evans * gdb.dwarf2/dw2-op-out-param.S: Make DW_FORM_ref4 values be the offset from the start of the CU. 2014-10-13 Jan Kratochvil Yao Qi Fix "save breakpoints" for "catch" command. * gdb.base/catch-signal.exp: Add gdb_breakpoint "main". Remove -nonewline. Match also the added "main" line. 2014-10-12 Jan Kratochvil Fix "save breakpoints" for "disable $bpnum" command. * gdb.base/save-bp.c (main): Add label. * gdb.base/save-bp.exp: Add 8th disabled breakpoint. Match it. 2014-10-12 Jan Kratochvil * gdb.base/save-bp.exp (info break): Use gdb_test_sequence. 2014-10-11 Yao Qi * gdb.server/server-kill.exp: Execute command "set remote trace-status-packet on" before "tstatus". 2014-10-11 Yao Qi * gdb.server/server-kill.c: Include sys/types.h and unistd.h. (main): Call getppid. * gdb.server/server-kill.exp: Set breakpoint on line "i = 0;" and continue to it. Read variable "server_pid". 2014-10-11 Yao Qi * gdb.server/server-kill.exp: Remove "delete_breakpoints". 2014-10-11 Yao Qi * gdb.threads/thread-find.exp: Don't execute command "info threads". * gdb.threads/attach-into-signal.exp (corefunc): Likewise. * gdb.threads/linux-dp.exp: Don't check the condition $threads_created equals to zero. 2014-10-10 Pedro Alves * gdb.base/bigcore.exp: Remove references to IRIX. * gdb.base/funcargs.exp: Likewise. * gdb.base/interrupt.exp: Likewise. * gdb.base/mips_pro.exp: Likewise. * gdb.base/nodebug.exp: Likewise. * gdb.base/setvar.exp: Likewise. * lib/gdb.exp (gdb_compile_shlib): Remove mips-sgi-irix* case. 2014-10-10 Jan Kratochvil Pedro Alves PR symtab/14466 * gdb.base/vdso-warning.c: New file. * gdb.base/vdso-warning.exp: New file. 2014-10-02 Doug Evans * gdb.base/structs.c (main): Don't run forever. 2014-10-02 Pedro Alves * gdb.threads/manythreads.exp (interrupt_and_wait): New procedure. (top level) : Use it. 2014-10-02 Pedro Alves * gdb.threads/break-while-running.exp (test): Add new 'update_thread_list' argument. Skip "info threads" if false. (top level): Add new 'update_thread_list' axis. 2014-10-02 Pedro Alves PR breakpoints/17431 * gdb.base/execl-update-breakpoints.c: New file. * gdb.base/execl-update-breakpoints.exp: New file. 2014-10-01 Pedro Alves * gdb.base/breakpoint-in-ro-region.c: New file. * gdb.base/breakpoint-in-ro-region.exp: New file. 2014-10-01 Simon Marchi * gdb.mi/mi-exit-code.exp: New file. * gdb.mi/mi-exit-code.c: New file. 2014-09-30 Yao Qi * lib/prelink-support.exp (build_executable_own_libs): Error if the target isn't native. 2014-09-30 Yao Qi * gdb.threads/dlopen-libpthread.exp: Skip it if isnative is false. 2014-09-22 Pedro Alves * gdb.threads/break-while-running.exp: New file. * gdb.threads/break-while-running.c: New file. 2014-09-19 Yao Qi * gdb.dwarf2/dw2-var-zero-addr.exp: Move test into new proc test. Invoke test. Restart GDB with --readnow and invoke test again. 2014-09-19 Yao Qi * gdb.base/break-on-linker-gcd-function.exp: Move test into new proc set_breakpoint_on_gcd_function. Invoke set_breakpoint_on_gcd_function. Restart GDB with --readnow and invoke set_breakpoint_on_gcd_function again. 2014-09-18 Doug Evans * gdb.dwarf2/symtab-producer.exp: New file. 2014-09-16 Sergio Durigan Junior * gdb.base/global-var-nested-by-dso-solib1.c: New file. * gdb.base/global-var-nested-by-dso-solib2.c: Likewise. * gdb.base/global-var-nested-by-dso.c: Likewise. * gdb.base/global-var-nested-by-dso.exp: Likewise. 2014-09-16 Sergio Durigan Junior Pedro Alves * gdb.base/watch-bitfields.exp: Pass string other than test file name to prepare_for_testing. (watch): New procedure. (expect_watchpoint): Use with_test_prefix. (top level): Factor out tests to ... (test_watch_location, test_regular_watch): ... these new procedures, and use with_test_prefix and gdb_continue_to_end. 2014-09-16 Patrick Palka PR breakpoints/12526 * gdb.base/watch-bitfields.exp: New file. * gdb.base/watch-bitfields.c: New file. 2014-09-16 Pedro Alves * gdb.base/watchpoint-stops-at-right-insn.exp (test): Compare software and hardware addresses, not software address against itself. 2014-09-16 Pedro Alves * gdb.base/watchpoint-stops-at-right-insn.c: New file. * gdb.base/watchpoint-stops-at-right-insn.exp: New file. 2014-09-16 Pedro Alves * config/vx.exp, config/vxworks.exp, config/vxworks29k.exp: Delete files. * gdb.base/a2-run.exp: Remove all code guarded by istarget "*-*-vxworks*" throughout. * gdb.base/break.exp: Likewise. * gdb.base/default.exp: Likewise. * gdb.base/scope.exp: Likewise. * gdb.base/sepdebug.exp: Likewise. * gdb.base/break.c: Remove all code guarded by #ifdef vxworks throughout. * gdb.base/run.c: Likewise. * gdb.base/sepdebug.c: Likewise. * gdb.hp/gdb.aCC/run.c: Likewise. * gdb.reverse/until-reverse.c: Likewise. * lib/gdb.exp (gdb_compile): Remove is_vxworks branch. 2014-09-16 Yao Qi * boards/local-remote-host-native.exp: New file. 2014-09-14 Doug Evans * gdb.threads/queue-signal.c (thread_count): New variable. (thread_count_mutex, thread_count_condvar): New variables. (incr_thread_count, wait_all_threads_running): New functions. (main): Wait for all threads to be in their thread functions. 2014-09-13 Doug Evans * gdb.threads/queue-signal.c: New file. * gdb.threads/queue-signal.exp: New file. 2014-09-13 Doug Evans * lib/gdb.exp (gdb_prompt): Add comment and change initial value to be consistent with what default_gdb_init uses. (with_gdb_prompt): Change form of PROMPT argument from a regexp to the plain text of the prompt. Add some logging printfs. * gdb.perf/disassemble.exp: Update call to with_gdb_prompt. 2014-09-12 Pedro Alves * gdb.arch/gdb1558.exp: Replace uses of gdb_expect after gdb_run_cmd with gdb_test_multiple or gdb_test throughout. * gdb.arch/i386-size-overlap.exp: Likewise. * gdb.arch/i386-size.exp: Likewise. * gdb.arch/i386-unwind.exp: Likewise. * gdb.base/a2-run.exp: Likewise. * gdb.base/break.exp: Likewise. * gdb.base/charset.exp: Likewise. * gdb.base/chng-syms.exp: Likewise. * gdb.base/commands.exp: Likewise. * gdb.base/dbx.exp: Likewise. * gdb.base/find.exp: Likewise. * gdb.base/funcargs.exp: Likewise. * gdb.base/jit-simple.exp: Likewise. * gdb.base/reread.exp: Likewise. * gdb.base/sepdebug.exp: Likewise. * gdb.base/step-bt.exp: Likewise. * gdb.cp/mb-inline.exp: Likewise. * gdb.cp/mb-templates.exp: Likewise. * gdb.objc/basicclass.exp: Likewise. * gdb.threads/killed.exp: Likewise. 2014-09-12 Edjunior Barbosa Machado PR tdep/17379 * gdb.arch/powerpc-stackless.S: New file. * gdb.arch/powerpc-stackless.exp: New file. 2014-09-12 Jan Kratochvil * gdb.base/attach.c: Include unistd.h. (main): Call alarm. Add label postloop. * gdb.base/attach.exp (do_attach_tests): Use gdb_get_line_number, gdb_breakpoint, gdb_continue_to_breakpoint. (test_command_line_attach_run): Kill ${testpid} in one exit path. 2014-09-11 Pedro Alves PR gdb/17347 * lib/gdb.exp (gdb_spawn_with_cmdline_opts): New procedure. * gdb.base/attach.exp (test_command_line_attach_run): New procedure. (top level): Call it. 2014-09-11 Pedro Alves * lib/gdb.exp (spawn_wait_for_attach): New procedure. * gdb.base/attach.exp (do_attach_tests, do_call_attach_tests) (do_command_attach_tests): Use spawn_wait_for_attach. * gdb.base/solib-overlap.exp: Likewise. * gdb.multi/multi-attach.exp: Likewise. * gdb.python/py-prompt.exp: Likewise. * gdb.python/py-sync-interp.exp: Likewise. * gdb.server/ext-attach.exp: Likewise. 2014-09-11 Gabriel Krisman Bertazi * gdb.fortran/array-element.exp: Remove unexpected "continue" command in testcase. Simplify testcase. 2014-09-10 Joel Brobecker * gdb.dwarf2/dynarr-ptr.exp: Add a few ptype tests. 2014-09-10 Joel Brobecker * gdb.dwarf2/dynarr-ptr.exp: Add 'first, 'last and 'length tests. 2014-09-10 Joel Brobecker * gdb.dwarf2/dynarr-ptr.exp: Add subscripting tests. 2014-09-10 Joel Brobecker * gdb.dwarf2/dynarr-ptr.c: New file. * gdb.dwarf2/dynarr-ptr.exp: New file. 2014-09-09 Maciej W. Rozycki * gdb.base/watchpoint-solib.exp: Increase the timeout by a factor of 30 rather than hardcoding 120 for a slow test case. Take the `gdb,timeout' target setting into account for this calculation. Don't extend the timeout for the test cases that don't need it. 2014-09-09 Maciej W. Rozycki * gdb.reverse/sigall-reverse.exp: Increase the timeout by a factor of 2 for a slow test case. Take the `gdb,timeout' target setting into account for this calculation. * gdb.reverse/until-precsave.exp: Increase the timeout by a factor of 15 and 3 respectively rather than adding 120 for a pair of slow test cases. Take the `gdb,timeout' target setting into account for this calculation. 2014-09-09 Maciej W. Rozycki * lib/gdb.exp (gdb_test_multiple): Remove code to select the timeout, don't pass one down to gdb_expect. (gdb_expect): Rework timeout selection. 2014-09-09 Maciej W. Rozycki * lib/gdbserver-support.exp (gdbserver_start): Throw an error exception on timeout. (gdbserver_run): Catch any `gdbserver_spawn' error exceptions. (gdbserver_start_extended): Catch any `gdbserver_start' error exceptions. (gdbserver_start_multi, mi_gdbserver_start_multi): Likewise. * lib/mi-support.exp (mi_gdb_target_load): Catch any `gdbserver_gdb_load' error exceptions. 2014-09-09 Maciej W. Rozycki * lib/gdbserver-support.exp (gdbserver_start): Set timeout to 120 on waiting for the TCP socket to open. 2014-09-09 Doug Evans * gdb.base/default.exp (show_conv_list): Add _caller_is, _caller_matches, _any_caller_is, _any_caller_matches. 2014-09-09 Doug Evans * gdb.guile/scm-error.exp: Handle guile 2.2 backtrace output. 2014-09-09 Yao Qi * gdb.mi/mi-var-display.exp: Set print symbol off. 2014-09-07 Gabriel Krisman Bertazi PR gdb/17035 * gdb.base/commands.exp: Add tests to verify user-defined commands with empty bodies. * gdb.python/py-cmd.exp: Test that we don't show user-defined python commands in `show user command`. * gdb.python/scm-cmd.exp: Test that we don't show user-defined scheme commands in `show user command`. 2014-09-07 Jan Kratochvil PR python/17355 * gdb.python/amd64-py-framefilter-invalidarg.S: New file. * gdb.python/py-framefilter-invalidarg-gdb.py.in: New file. * gdb.python/py-framefilter-invalidarg.exp: New file. * gdb.python/py-framefilter-invalidarg.py: New file. 2014-09-06 Doug Evans PR 15276 * gdb.python/py-caller-is.c: New file. * gdb.python/py-caller-is.exp: New file. 2014-09-05 Sergio Durigan Junior PR gdb/17235 * gdb.arch/amd64-stap-wrong-subexp.exp: New file. * gdb.arch/amd64-stap-wrong-subexp.S: Likewise. 2014-09-04 Sergio Durigan Junior PR fortran/17237 * gdb.fortran/print-formatted.exp: New file. * gdb.fortran/print-formatted.f90: Likewise. 2014-09-03 Sasha Smundak * gdb.python/py-frame.exp: Test Frame.read_register. 2014-09-03 Sergio Durigan Junior PR python/16699 * gdb.python/py-completion.exp: New file. * gdb.python/py-completion.py: Likewise. 2014-08-28 Doug Evans * gdb.arch/amd64-pseudo.c (main): Rewrite to better specify when eax,etc. are live with values set by gdb and thus the compiler can't use them. * gdb.arch/i386-pseudo.c (main): Ditto. 2014-08-27 Doug Evans * lib/gdb.exp (gdb_compile_shlib): Add support for clang. 2014-08-25 Doug Evans * gdb.mi/basics.c (callee3, callee2, callee1): Specify result type. (main): Ditto. 2014-08-25 Doug Evans * gdb.threads/thread-execl.exp: #include . 2014-08-24 Yao Qi * gdb.guile/scm-value.exp (test_lazy_strings): Set print symbol off. * gdb.python/py-value.exp (test_lazy_strings): Likewise. 2014-08-22 Doug Evans PR 17276 * gdb.dwarf2/dw2-single-line-discriminators.S: New file. * gdb.dwarf2/dw2-single-line-discriminators.c: New file. * gdb.dwarf2/dw2-single-line-discriminators.exp: New file. 2014-08-22 Yao Qi * gdb.python/py-finish-breakpoint.exp: Copy .py file to host. * gdb.python/py-finish-breakpoint2.exp: Likewise. * gdb.python/python.exp: Likewise. Use .py file on the host instead of the build. 2014-08-21 Jan Kratochvil * gdb.threads/gcore-stale-thread.c: New file. * gdb.threads/gcore-stale-thread.exp: New file. 2014-08-21 Pedro Alves * gdb.base/gcore-buffer-overflow.exp: Remove "help gcore" test. * gdb.base/gcore-relro-pie.exp: Likewise. * gdb.base/gcore-relro.exp: Likewise. * gdb.base/gcore.exp: Likewise. * gdb.base/print-symbol-loading.exp: Likewise. * gdb.threads/gcore-thread.exp: Likewise. * lib/gdb.exp (gdb_gcore_cmd): Don't expect "Undefined command". 2014-08-20 Pedro Alves Jan Kratochvil * Makefile.in (EXTRA_RULES, CC): New variables, get from configure. (EXPECT): Handle READ1 being set. (all): Depend on EXTRA_RULES. (check-read1, expect-read1, read1.so, read1): New rules. * README (Testsuite Parameters): Document the READ1 make variable. (Race detection): New section. * configure: Regenerate. * configure.ac: If build==host==target, and running under a GNU/glibc system, add read1 to the extra Makefile rules. (EXTRA_RULES): AC_SUBST it. * lib/read1.c: New file. 2014-08-20 Joel Brobecker * gdb.dwarf2/data-loc.exp: Add additional tests exercising the handling of variables declared as a typedef to an array which a DW_AT_data_location attribute. 2014-08-19 Andrew Burgess Pedro Alves PR symtab/14604 PR symtab/14605 * gdb.dwarf2/dw2-op-out-param.exp: Remove kfail branches and use gdb_test. 2014-08-19 Pedro Alves * gdb.base/watchpoint-hw-hit-once.c (main): Update comment. 2014-08-19 Yao Qi * gdb.base/watchpoint-hw-hit-once.exp: Set breakpoint on the right line. 2014-08-18 David Blaikie * boards/fission.exp: Explicitly pass -ggnu-pubnames for clang. 2014-08-18 Joel Brobecker * gdb.dwarf2/data-loc.exp: Remove second DW_AT_upper bound attribute in array range. 2014-08-18 Joel Brobecker * gdb.dwarf2/data-loc.c, gdb.dwarf2/data-loc.exp: New files. 2014-08-15 Siva Chandra Reddy PR c++/17132 * gdb.cp/pr17132.cc: New file. * gdb.cp/pr17132.exp: New file. 2014-08-15 Siva Chandra Reddy * gdb.python/py-xmethods.py (A_getarrayind) (E_method_char_worker.__call__, E_method_int_worker.__call__): Use 'print' with function call syntax. (E_method_matcher.match): Fix tab vs space indentation mixup. 2014-08-15 Yao Qi * gdb.trace/tfile.exp: Return -1 if generate_tracefile returns false. 2014-08-15 Yao Qi * gdb.cp/casts.exp: Set print symbol off. * gdb.cp/class2.exp: Likewise. * gdb.cp/overload.exp: Likewise. * gdb.cp/templates.exp: Likewise. 2014-08-11 Doug Evans * gdb.base/print-symbol-loading.exp (test_load_core): Update. (test_load_shlib): Update. 2014-08-09 Yao Qi * gdb.base/display.exp: Invoke is_address_zero_readable. * gdb.guile/scm-value.exp (test_value_in_inferior): Likewise. * gdb.python/py-value.exp (test_value_in_inferior): Likewise. * gdb.base/hbreak-unmapped.exp: Return if is_address_zero_readable returns true. * gdb.base/signest.exp: Likewise. * gdb.base/signull.exp: Likewise. * gdb.base/sigbpt.exp: Likewise. * gdb.guile/scm-disasm.exp: Do the test if is_address_zero_readable returns false. * gdb.guile/scm-pretty-print.exp (run_lang_tests): Likewise. * gdb.python/py-arch.exp: Likewise. * gdb.python/py-prettyprint.exp (run_lang_tests): Likewise. * lib/gdb.exp (is_address_zero_readable): New proc. 2014-08-09 Yao Qi PR testsuite/13443 * gdb.mi/mi-var-display.exp: Make test messages unique. 2014-08-04 Tom Tromey * gdb.base/sss-bp-on-user-bp-2.exp: Expect output from "set debug target 0". 2014-08-04 Tom Tromey * gdb.base/sss-bp-on-user-bp-2.exp: Match "to_resume", not "target_resume". 2014-08-01 Joel Brobecker * gdb.base/vla-datatypes.c (vla_factory): Add new variable inner_vla_struct_object_size. * gdb.base/vla-datatypes.exp: Adjust last test, and mark it as xfail. 2014-07-30 Pedro Alves * gdb.threads/signal-command-handle-nopass.exp (test): Add comment. 2014-07-29 Yao Qi PR gdb/17206 * gdb.base/until-nodebug.exp: New. 2014-07-28 Doug Evans PR guile/17203 * gdb.guile/scm-parameter.exp: Add tests for trying to create previously existing parameter, and previously ambiguously spelled parameter. 2014-07-28 Will Newton * gdb.base/varargs.exp: Remove KFAILs for ARM. 2014-07-26 Ludovic Courtès Doug Evans PR guile/17146 * gdb.guile/types-module.exp: Add tests for wrong type arguments. 2014-07-25 Pedro Alves * gdb.threads/signal-command-handle-nopass.c: New file. * gdb.threads/signal-command-handle-nopass.exp: New file. * gdb.threads/signal-command-multiple-signals-pending.c: New file. * gdb.threads/signal-command-multiple-signals-pending.exp: New file. * gdb.threads/signal-delivered-right-thread.c: New file. * gdb.threads/signal-delivered-right-thread.exp: New file. 2014-07-25 Pedro Alves * gdb.base/double-prompt-target-event-error.exp (cancel_pagination_in_target_event): Remove '-notransfer ' match. (cancel_pagination_in_target_event): Rework double prompt detection. * gdb.base/paginate-after-ctrl-c-running.exp (test_ctrlc_while_target_running_paginates): Remove '-notransfer ' match. * gdb.base/paginate-bg-execution.exp (test_bg_execution_pagination_return) (test_bg_execution_pagination_cancel): Remove '-notransfer ' matches. * gdb.base/paginate-execution-startup.exp (test_fg_execution_pagination_return) (test_fg_execution_pagination_cancel): Remove '-notransfer ' matches. * gdb.base/paginate-inferior-exit.exp (test_paginate_inferior_exited): Remove '-notransfer ' match. * lib/gdb-utils.exp (string_to_regexp): Move here from lib/gdb.exp. * lib/gdb.exp (pagination_prompt): Run text through string_to_regexp. (gdb_test_multiple): Match $pagination_prompt instead of "". (string_to_regexp): Move to lib/gdb-utils.exp. 2014-07-22 Jan Kratochvil * gdb.arch/amd64-entry-value-paramref.S: New file. * gdb.arch/amd64-entry-value-paramref.cc: New file. * gdb.arch/amd64-entry-value-paramref.exp: New file. * gdb.arch/amd64-optimout-repeat.S: New file. * gdb.arch/amd64-optimout-repeat.c: New file. * gdb.arch/amd64-optimout-repeat.exp: New file. 2014-07-17 Jan Kratochvil PR gdb/17170 * gdb.base/statistics.exp: New file. 2014-07-17 Doug Evans PR gdb/17170 * gdb.base/maint.exp: Update testing of per-command stats. 2014-07-16 Pedro Alves * gdb.trace/tfile.c: Include unistd.h and stdint.h. (start_trace_file): Guard S_IRGRP and S_IROTH uses behind #ifdef. (tfile_write_64, tfile_write_16, tfile_write_8, tfile_write_addr) (tfile_write_buf): New functions. (add_memory_block): Rewrite using the above. (adjust_function_address): New function. (FUNCTION_ADDRESS): New macro. (write_basic_trace_file): Remove short_x local, and use tfile_write_16. Change type of func_addr local to unsigned long long. Use FUNCTION_ADDRESS instead of handling the Thumb bit here. Cast argument of add_memory_block to char pointer. (write_error_trace_file): Avoid alloca. Use FUNCTION_ADDRESS. (main): Remove parameters. * gdb.trace/tfile.exp: Remove nowarnings. 2014-07-15 Simon Marchi * gdb.base/debug-expr.exp: Test string evaluation with "debug expression" on. 2014-07-15 Pedro Alves * gdb.base/reread.exp: Use clean_restart. 2014-07-15 Pierre Langlois * gdb.arch/avr-flash-qualifer.c: New. * gdb.arch/avr-flash-qualifer.exp: New. 2014-07-14 Pedro Alves * gdb.base/paginate-after-ctrl-c-running.c: New file. * gdb.base/paginate-after-ctrl-c-running.exp: New file. 2014-07-14 Pedro Alves * gdb.base/double-prompt-target-event-error.c: New file. * gdb.base/double-prompt-target-event-error.exp: New file. 2014-07-14 Pedro Alves PR gdb/17072 * gdb.base/paginate-inferior-exit.c: New file. * gdb.base/paginate-inferior-exit.exp: New file. 2014-07-14 Pedro Alves PR gdb/17072 * gdb.base/paginate-bg-execution.c: New file. * gdb.base/paginate-bg-execution.exp: New file. 2014-07-14 Pedro Alves PR gdb/17072 * gdb.base/paginate-execution-startup.c: New file. * gdb.base/paginate-execution-startup.exp: New file. * lib/gdb.exp (pagination_prompt): New global. (default_gdb_spawn): New procedure, factored out from default_gdb_spawn. (default_gdb_start): Adjust to call default_gdb_spawn. (gdb_spawn): New procedure. 2014-07-14 Pedro Alves * lib/gdb.exp (gdb_assert): New procedure. * gdb.trace/backtrace.exp (gdb_backtrace_tdp_4): Use it. 2014-07-14 Pedro Alves * gdb.base/execution-termios.c: New file. * gdb.base/execution-termios.exp: New file. 2014-07-14 Tom Tromey * gdb.cp/vla-cxx.cc: New file. * gdb.cp/vla-cxx.exp: New file. 2014-07-14 Tom Tromey * gdb.reverse/rerun-prec.c: New file. * gdb.reverse/rerun-prec.exp: New file. 2014-07-12 Maciej W. Rozycki Maciej W. Rozycki * lib/gdb-utils.exp: New file. * lib/gdb.exp (gdb_run_cmd): Call gdb_init_commands, replacing inline `gdb_init_command' processing. (gdb_start_cmd): Likewise. * lib/mi-support.exp (mi_run_cmd): Likewise. * README: Document `gdb_init_command' and `gdb_init_commands'. 2014-07-11 Jan Kratochvil Fix false FAIL running under a very long directory name. * gdb.base/argv0-symlink.exp: Add "set print repeats 10000" and "set print elements 10000". Twice. 2014-07-11 Yao Qi * gdb.base/exprs.exp: "set print symbol off". 2014-07-11 Pedro Alves * gdb.threads/kill.c: New file. * gdb.threads/kill.exp: New file. 2014-07-10 Yao Qi * gdb.trace/tfile.c (write_basic_trace_file) [__thumb__||__thumb2__]: Clear the Thumb bit of the function address written to trace file. 2014-07-09 Pedro Alves * gdb.base/attach-wait-input.exp: New file. * gdb.base/attach-wait-input.c: New file. 2014-07-09 Andrew Burgess * gdb.mi/var-cmd.c (do_nested_struct_union_tests): New function setting up test structures. (main): Call new test function. * gdb.mi/mi2-var-child.exp: Create additional breakpoint in new test function, continue into test function and walk test structures. 2014-07-02 Yao Qi * gdb.trace/entry-values.c: Define labels 'foo_start' and 'bar_start' at the beginning of functions 'foo' and 'bar' respectively. * gdb.trace/entry-values.exp: Use 'foo_start' and 'bar_start' instead of 'foo' and 'bar'. 2014-07-08 Markus Metzger * gdb.btrace/segv.exp: New. * gdb.btrace/segv.c: New. 2014-07-02 Luis Machado * gdb.trace/entry-values.exp: Handle powerpc-specific branch instruction. 2014-06-30 Mark Wielaard * gdb.base/constvars.c (violent, violet, vips, virgen, vulgar, vulture, vilify, villar): New volatile array constants. (vindictive, vegetation): New const volatile array constants. * gdb.base/volatile.exp: Test volatile and const volatile array types. 2014-06-30 Andreas Arnez * gdb.base/watchpoint-reuse-slot.exp: Handle the case that the target lacks support for awatch, rwatch, or hbreak. 2014-06-27 Yao Qi * gdb.multi/dummy-frame-restore.exp: New. * gdb.multi/dummy-frame-restore.c: New. 2014-06-25 Markus Metzger * gdb.btrace/gcore.exp: New. 2014-06-23 Pedro Alves * gdb.base/watchpoint-reuse-slot.c: New file. * gdb.base/watchpoint-reuse-slot.exp: New file. 2014-06-23 Siva Chandra Reddy * gdb.python/py-xmethods.exp: Use "progspace" instead of the progspace's filename in 'info', 'enable' and 'disable' command tests. 2014-06-23 Jan Kratochvil * gdb.arch/amd64-stap-special-operands.exp: Use is_lp64_target. * gdb.arch/amd64-stap-optional-prefix.exp: Likewise. * gdb.dwarf2/dw2-error.exp: Use istarget and is_lp64_target. 2014-06-20 Gary Benson * gdb.arch/i386-avx.exp: Fix include file location. * gdb.arch/i386-sse.exp: Likewise. 2014-06-19 Iain Buclaw * gdb.dlang/expression.exp: New file. 2014-06-19 Pedro Alves * gdb.threads/thread-execl.exp (do_test): New procedure, factored out from ... (top level): ... here. Iterate running tests under different scheduler-locking settings. 2014-06-18 Luis Machado * gdb.cp/nsalias.exp: Set type of low_pc and high_pc entries to DW_FORM_addr and use non-zero addresses. 2014-06-18 Siva Chandra Reddy PR gdb/17017 * gdb.python/py-xmethods.cc: Add global function call counters and increment them in their respective functions. Remove "cout" statements. * gdb.python/py-xmethods.exp: Make tests check the global function call counters instead of depending on inferior IO. 2014-06-18 Don Breazeal * gdb.base/foll-fork.exp (default_fork_parent_follow): Deleted procedure. (explicit_fork_parent_follow): Deleted procedure. (explicit_fork_child_follow): Deleted procedure. (test_follow_fork): New procedure. (do_fork_tests): Replace calls to deleted procedures with calls to test_follow_fork and reset GDB for subsequent procedure calls. 2014-06-17 Yao Qi * gdb.base/wchar.exp: Set $cent to \u00A2 if "host-charset" is CP1252. 2014-06-17 Luis Machado * gdb.mi/mi-var-rtti.cc (type_update_when_use_rtti_test): Initialize ptr and S explicitly. (skip_type_update_when_not_use_rtti_test): Likewise. 2014-06-16 Keith Seitz PR mi/15863 * gdb.mi/mi-var-cmd.exp: Add test for -var-update before the inferior is started. 2014-06-16 Pedro Alves * gdb.base/break-main-file-remove-fail.c: New file. * gdb.base/break-main-file-remove-fail.exp: New file. * gdb.base/break-unload-file.exp: Use build_executable instead of prepare_for_testing. (test_break): New parameter "initial_load". Handle it. (top level): Add initial_load cmdline/file axis. 2014-06-12 Tom Tromey * gdb.base/completion.exp: Don't use directory name in test. 2014-06-09 Gary Benson * gdb.base/sigall.c [Functions to send signals]: Reorder to separate the always-available ANSI-standard signals from the signals that require checking. (main): Likewise. * gdb.reverse/sigall-reverse.c [Functions to send signals]: Likewise. (main): Likewise. 2014-06-07 Keith Seitz Revert: PR c++/16253 * gdb.cp/var-tag.cc: New file. * gdb.cp/var-tag.exp: New file. * gdb.dwarf2/dw2-ada-ffffffff.exp: Set the language to C++. * gdb.dwarf2/dw2-anon-mptr.exp: Likewise. * gdb.dwarf2/dw2-double-set-die-type.exp: Likewise. * gdb.dwarf2/dw2-inheritance.exp: Likewise. 2014-06-06 Doug Evans * gdb.guile/scm-frame-args.c (foo): Tweak to work with gcc 4.6.3. 2014-06-06 Pedro Alves * gdb.base/sss-bp-on-user-bp-2.exp: Look for target_resume(step) in target debug output instead of looking at RSP packets, disabling the test on any target that uses hardware stepping. Update comments. 2014-06-06 Pedro Alves * gdb.base/break-unload-file.exp: Fix typo. 2014-06-06 Yao Qi * gdb.base/jit.exp (one_jit_test): Restrict the pattern from "jit_function" to "^jit_function". 2014-06-06 Yao Qi * gdb.base/async.c (foo): Add one statement. * gdb.base/async.exp: Get the next instruction address and match the output of "nexti" by instruction address. Match the hex address in the output of "finish". 2014-06-06 Gary Benson * gdb.base/call-signals.c: Remove preprocessor conditionals for always-defined signals SIGINT, SIGILL, SIGABRT, SIGFPE, SIGSEGV and SIGTERM. * gdb.base/sigall.c: Likewise. * gdb.base/unwindonsignal.c: Likewise. * gdb.reverse/sigall-reverse.c: Likewise. 2014-06-06 Yao Qi * gdb.base/hbreak-unmapped.exp: Read memory at address 0. If readable, skip the test. 2014-06-06 Yao Qi * gdb.threads/staticthreads.c (thread_function): Move the line setting breakpoint on forward. * gdb.threads/staticthreads.exp: Update comments. 2014-06-05 Ludovic Courtès * gdb.guile/scm-value.exp (test_value_in_inferior): Add test "history-append! type error". 2014-06-05 Simon Marchi * gdb.mi/mi-breakpoint-changed.exp (test_insert_delete_modify): Fix erroneous dprintf expected input. 2014-06-04 Doug Evans * gdb.guile/scm-generics.exp: Delete. 2014-06-04 Doug Evans * gdb.guile/scm-breakpoint.exp: Update. Add tests for breakpoint registration. 2014-06-04 Tom Tromey * gdb.base/vla-datatypes.exp: Add tests for VLA-in-structure and VLA-in-union. * gdb.base/vla-datatypes.c (vla_factory): Add vla_struct, inner_vla_struct, vla_union types. Initialize objects of those types and compute their sizes. 2014-06-04 Nathan Sidwell Hui Zhu * gdb.base/fileio.exp: Add test for shell not available as well as available. * gdb.base/fileio.c (test_system): Check for shell twice. 2014-06-04 Yao Qi * gdb.base/auto-connect-native-target.exp: Remove redundant space from the regexp pattern. 2014-06-04 Yao Qi * gdb.base/default.exp: Replace "child" with "native" in regexp pattern. 2014-06-03 Siva Chandra Reddy * gdb.python/py-xmethods.cc: New testcase to test xmethods. * gdb.python/py-xmethods.exp: New tests to test xmethods. * gdb.python/py-xmethods.py: Python script supporting the new testcase and tests. 2014-06-03 Joel Brobecker Pedro Alves PR breakpoints/17000 * gdb.base/sss-bp-on-user-bp.exp: Remove kfail. * gdb.base/sss-bp-on-user-bp-2.exp: Remove kfail. 2014-06-03 Brad Mouring (tiny patch) * gdb.base/subst.exp: Add tests to verify partial path matching output. 2014-06-03 Pedro Alves * gdb.base/sss-bp-on-user-bp-2.exp: Skip if testing with a remote target that doesn't use software single-stepping. 2014-06-03 Pedro Alves PR breakpoints/17000 * gdb.base/sss-bp-on-user-bp-2.c: New file. * gdb.base/sss-bp-on-user-bp-2.exp: New file. 2014-06-02 Doug Evans * gdb.guile/scm-parameter.exp: New file. 2014-06-02 Doug Evans * gdb.guile/scm-cmd.c: New file. * gdb.guile/scm-cmd.exp: New file. 2014-06-02 Doug Evans * gdb.guile/scm-pretty-print.exp: Add tests for objfile and progspace pretty-printer lookup. * gdb.guile/scm-pretty-print.scm (pp_s-printer): New function. (make-pp_s-printer): Call it. (make-pretty-printer-from-dict): New function. (lookup-pretty-printer-maker-from-dict): New function. (*pretty-printer*): Simplify. (make-objfile-pp_s-printer): New function. (install-objfile-pretty-printers!): New function. (make-progspace-pp_s-printer): New function. (install-progspace-pretty-printers!): New function. * gdb.guile/scm-progspace.c: New file. * gdb.guile/scm-progspace.exp: New file. 2014-06-02 Pedro Alves * gdb.base/dprintf-bp-same-addr.c: New file. * gdb.base/dprintf-bp-same-addr.exp: New file. 2014-06-02 Edjunior Barbosa Machado * gdb.arch/powerpc-power.exp: Add power8 instructions to the testcase. * gdb.arch/powerpc-power.s: Likewise. 2014-06-02 Joel Brobecker * gdb.base/completion.exp: Remove code aimed at restoring TIMEOUT. 2014-06-01 Yao Qi * gdb.base/watchpoint.exp (test_watch_location): Check null pointer can be dereferenced. If not, do the test, otherwise skip it. 2014-05-30 Andrew Burgess * gdb.arch/amd64-invalid-stack-middle.exp: Update expected results. * gdb.arch/amd64-invalid-stack-top.exp: Likewise. 2014-05-30 Andrew Burgess * gdb.arch/amd64-invalid-stack-middle.S: New file. * gdb.arch/amd64-invalid-stack-middle.c: New file. * gdb.arch/amd64-invalid-stack-middle.exp: New file. * gdb.arch/amd64-invalid-stack-top.c: New file. * gdb.arch/amd64-invalid-stack-top.exp: New file. 2014-05-30 Pedro Alves PR breakpoints/17000 * gdb.base/sss-bp-on-user-bp.c: New file. * gdb.base/sss-bp-on-user-bp.exp: New file. 2014-05-30 David Blaikie * gdb.opt/inline-break.c: Fix clang compatibility by specifying gnu_inline semantics via attribute. * gdb.opt/inline-break.exp: Remove -std=c89 now that the test source explicitly specifies the required semantics. 2014-05-30 Maciej W. Rozycki * gdb.reverse/sigall-reverse.exp: Fix a typo. 2014-05-29 Pedro Alves Tom Tromey * gdb.base/async-shell.exp: Don't enable target-async. * gdb.base/async.exp * gdb.base/corefile.exp (corefile_test_attach): Remove 'async' parameter. Adjust. (top level): Don't test with "target-async". * gdb.base/dprintf-non-stop.exp: Don't enable target-async. * gdb.base/gdb-sigterm.exp: Don't test with "target-async". * gdb.base/inferior-died.exp: Don't enable target-async. * gdb.base/interrupt-noterm.exp: Likewise. * gdb.mi/mi-async.exp: Use "mi-async" instead of "target-async". * gdb.mi/mi-nonstop-exit.exp: Likewise. * gdb.mi/mi-nonstop.exp: Likewise. * gdb.mi/mi-ns-stale-regcache.exp: Likewise. * gdb.mi/mi-nsintrall.exp: Likewise. * gdb.mi/mi-nsmoribund.exp: Likewise. * gdb.mi/mi-nsthrexec.exp: Likewise. * gdb.mi/mi-watch-nonstop.exp: Likewise. * gdb.multi/watchpoint-multi.exp: Adjust comment. * gdb.python/py-evsignal.exp: Don't enable target-async. * gdb.python/py-evthreads.exp: Likewise. * gdb.python/py-prompt.exp: Likewise. * gdb.reverse/break-precsave.exp: Don't test with "target-async". * gdb.server/solib-list.exp: Don't enable target-async. * gdb.threads/thread-specific-bp.exp: Likewise. * lib/mi-support.exp: Adjust to use mi-async. 2014-05-29 Pedro Alves PR gdb/13860 * gdb.mi/mi-cli.exp: Always expect "end-stepping-range" stop reason, even in sync mode. 2014-05-29 Pedro Alves Hui Zhu PR PR15693 * gdb.mi/mi-condbreak-call-thr-state-mt.c: New file. * gdb.mi/mi-condbreak-call-thr-state-st.c: New file. * gdb.mi/mi-condbreak-call-thr-state.c: New file. * gdb.mi/mi-condbreak-call-thr-state.exp: New file. 2014-05-28 Joel Brobecker * config/monitor.exp (gdb_target_monitor): Replace use of "set remotebaud" by "set serial baud". 2014-05-26 Andy Wingo * gdb.guile/scm-breakpoint.exp: * gdb.guile/scm-gsmob.exp: Update to use plain old object properties instead of gdb-object-properties. 2014-05-26 Yao Qi * gdb.server/no-thread-db.exp: Specify source file name explicitly when setting a breakpoint. 2014-05-23 Markus Metzger * gdb.btrace/vdso.c: New. * gdb.btrace/vdso.exp: New. 2014-05-23 Markus Metzger * gdb.base/gcore.exp (capture_command_output): Move ... * lib/gdb.exp (capture_command_output): ... here. 2014-05-23 Markus Metzger * gdb.btrace/data.exp: Test memory access during btrace replay. 2014-05-22 Simon Marchi * lib/mi-support.exp (mi_run_cmd_full): Add comments. 2014-05-21 Pedro Alves PR gdb/13860 * gdb.mi/mi-cli.exp (line_callee4_next_step): New global. (top level): Test that output related to execution commands is sent to the console with CLI commands, but not with MI commands. Test that breakpoint events are always mirrored to the console. Also expect the new source line to be output after a "next" in async mode too. Make it a pass/fail test. * gdb.mi/mi-solib.exp: Test that the CLI solib event note is output. * lib/mi-support.exp (mi_gdb_expect_cli_output): New procedure. 2014-05-21 Pedro Alves * gdb.base/list.exp (build_pattern, test_list): New procedures. Use them to test variations of "list" after reaching a breakpoint. * gdb.mi/mi-cli.exp (line_main_callme_2): New global. Test "list" with listsize 10 after reaching a breakpoint. * gdb.python/python.exp (decode_line current location line number): Adjust expected line number. 2014-05-21 Simon Marchi * lib/mi-support.exp (mi_run_cmd_full): Revert to original behavior for $args, pass it directly to "run". 2014-05-21 Maciej W. Rozycki * lib/gdb.exp (default_gdb_init): Bump `match_max' up from 30000 to 65536. 2014-05-21 Pedro Alves * boards/gdbserver-base.exp (GDBFLAGS): Set to "set auto-connect-native-target off". * gdb.base/auto-connect-native-target.c: New file. * gdb.base/auto-connect-native-target.exp: New file. 2014-05-21 Pedro Alves * gdb.base/default.exp: Test "target native" instead of "target child". 2014-05-21 Mark Wielaard * gdb.cp/var-tag.exp (do_global_tests): Handle underlying type. 2014-05-21 Jan Kratochvil Fix TLS access for -static -pthread. * gdb.threads/staticthreads.c (tlsvar): New. (thread_function, main): Initialize it. * gdb.threads/staticthreads.exp: Try gdb_compile_pthreads for $have_tls. Add clean_restart. <$have_tls != "">: Check TLSVAR. 2014-05-21 Pedro Alves * gdb.base/dcache-line-read-error.c: New. * gdb.base/dcache-line-read-error.exp: New. 2014-05-20 Pedro Alves * gdb.base/compare-sections.c: New file. * gdb.base/compare-sections.exp: New file. 2014-05-20 Pedro Alves * gdb.base/break-idempotent.c: New file. * gdb.base/break-idempotent.exp: New file. 2014-05-20 Markus Metzger * gdb.btrace/nohist.exp: New. 2014-05-20 Yao Qi * lib/gdb.exp (gdb_init): Set timeout if test file is under gdb.reverse directory and gdb_reverse_timeout exists in board setting. * README: Document gdb_reverse_timeout. 2014-05-20 Yao Qi * lib/gdb.exp (default_gdb_init): Rename argument 'args' by 'test_file_name'. Treat args as a string instead of a list. (gdb_init): Rename argument 'args' by 'test_file_name'. 2014-05-19 Jan Kratochvil * gdb.arch/powerpc-power.exp: New file. * gdb.arch/powerpc-power.s: New file. 2014-05-16 Doug Evans * gdb.base/Makefile.in (EXECUTABLES): Add completion. * gdb.base/completion.exp: Check that all expected files exist before doing file completion. 2014-05-16 Doug Evans * gdb.base/catch-syscall.exp (test_catch_syscall_fail_nodatadir): Update. (do_syscall_tests_without_xml): Update. 2014-05-16 Pedro Alves * lib/mi-support.exp (mi_expect_stop): On timeout, say "timeout" instead of "unknown output after running". 2014-05-16 Yao Qi * gdb.dwarf2/dw2-filename.exp: Copy file1.txt to host. Remove file1.txt from host at the end. * gdb.dwarf2/dw2-anonymous-func.exp: Likewise. 2014-05-15 Doug Evans * gdb.dwarf2/fission-reread.S: Remove directory from .dwo file path. * gdb.dwarf2/fission-reread.exp: Set debug-file-directory before loading file. Add test for TU lookup. 2014-05-15 Simon Marchi * lib/mi-support.exp (mi_run_cmd_full): Set arguments by calling "-exec-arguments" or "set args" before running the inferior. 2014-05-15 Simon Marchi * lib/mi-support.exp (mi_expect_stop): Expect message for inferiors that exit with non-zero exit code. 2014-05-14 Yao Qi * gdb.mi/mi-file.exp (test_file_list_exec_source_file): Don't match absolute path on remote host. (test_file_list_exec_source_files): Remove "/" from the pattern. 2014-05-14 Yao Qi * boards/local-remote-host-notty.exp (${board}_file): New proc. 2014-05-07 Kyle McMartin Pushed by Joel Brobecker . * gdb.arch/aarch64-atomic-inst.c: New file. * gdb.arch/aarch64-atomic-inst.exp: New file. 2014-05-07 Yao Qi * gdb.dwarf2/dwzbuildid.exp: Match output "No symbol "the_int" in current context" too. 2014-05-05 Keith Seitz * gdb.linespec/ls-dollar.exp: Add test for linespec file:convenience_variable. 2014-05-05 Yao Qi * gdb.trace/unavailable.exp (gdb_collect_args_test): Save traceframes into tfile and ctf trace files. Read data from trace file and test collected data. (gdb_collect_locals_test): Likewise. (gdb_unavailable_registers_test): Likewise. (gdb_unavailable_floats): Likewise. (gdb_collect_globals_test): Likewise. (top-level): Append "ctf" to trace_file_targets if GDB supports. 2014-05-05 Yao Qi * gdb.trace/unavailable.exp (gdb_collect_args_test): Move some code to ... (gdb_collect_args_test_1): ... it. New proc. (gdb_collect_locals_test): Move some code to ... (gdb_collect_locals_test_1): ... it. New proc. (gdb_unavailable_registers_test): Move some code to ... (gdb_unavailable_registers_test_1): ... it. New proc. (gdb_unavailable_floats): Move some code to ... (gdb_unavailable_floats_1): ... it. New proc. 2014-05-02 Sergio Durigan Junior * gdb.arch/amd64-stap-optional-prefix.S (main): Add several probes to test for bitness recognition. * gdb.arch/amd64-stap-optional-prefix.exp (test_probe_value_without_reg): New procedure. Add code to test for different kinds of bitness. 2014-05-02 Sergio Durigan Junior PR breakpoints/16889 * gdb.arch/amd64-stap-optional-prefix.S: New file. * gdb.arch/amd64-stap-optional-prefix.exp: Likewise. 2014-05-01 Pedro Alves * lib/gdb.exp (gdb_load): Extend comment. Skip calling gdb_file_cmd if no file is specified. * boards/native-extended-gdbserver.exp (gdb_load): Use the last_loaded_file to set the remote exec-file. 2014-05-01 Pedro Alves * boards/local-remote-host.exp: New file. 2014-05-01 Pedro Alves * boards/local-remote-host.exp: Rename to ... * boards/local-remote-host-notty.exp: ... this. 2014-04-28 Joel Brobecker * gdb.ada/dyn_arrayidx: New testcase. 2014-04-26 Yao Qi * gdb.dwarf2/dwz.exp: Compile main.c to object. Restart GDB and compute the length of function main. Save it in $main_length. (Dwarf::assemble): Use $main_length instead of hard-coded 10. (top-level): Use gdb_compile to compile objects into executable and restart GDB. Remove invocation to prepare_for_testing. 2014-04-25 Simon Marchi Pedro Alves PR server/16255 * gdb.multi/multi-attach.c: New file. * gdb.multi/multi-attach.exp: New file. 2014-04-25 Pedro Alves * gdb.base/cond-eval-mode.exp (warning): Move trailing \r\n to user. (top level): Test that "set remote conditional-breakpoints-packet off" works as intended. * gdb.base/dprintf.exp: Test that "set remote breakpoint-commands-packet off" works as intended. * gdb.trace/change-loc.exp (tracepoint_install_in_trace_disabled): New function. (top level): Call it. * gdb.trace/ftrace.exp (test_fast_tracepoints): Test that "set remote fast-tracepoints-packet off" works as intended. * gdb.trace/qtro.exp (gdb_is_target_remote): Moved ... * lib/gdb.exp (gdb_is_target_remote): ... here. 2014-04-24 David Blaikie * gdb.base/catch-syscall.c: Make unreferenced statics non-static to ensure clang would not discard them. * gdb.base/gdbvars.c: Ditto. * gdb.base/memattr.c: Ditto. * gdb.base/whatis.c: Ditto. * gdb.python/py-prettyprint.c: Ditto. * gdb.trace/actions.c: Ditto. * gdb.cp/ptype-cv-cp.cc: Mark unused global const int as used to ensure clang would not discard it. 2014-04-24 David Blaikie * gdb.stabs/gdb11479.c (tag_dummy_enum): introduce a variable to cause clang to emit the full definition of type required by the test * gdb.stabs/gdb11479.exp (do_test): correct a typo in a test message 2014-04-24 David Blaikie * gdb.cp/pr10728-x.cc (main::x): Return by value instead of pointer to coax Clang into emitting the definition of the type. * gdb.cp/pr10728-x.h (y): Ditto. * gdb.cp/pr10728-y.cc (y): Ditto. 2014-04-24 David Blaikie * gdb.base/label.exp: XFAIL label related tests under Clang. * gdb.cp/cplabel.exp: Ditto. * gdb.linespec/ls-errs.exp: Refactor tests to execute directly and XFAIL under Clang those using labels. 2014-04-25 Yao Qi * gdb.dwarf2/dwz.exp (Dwarf::assemble): Remove unused double_label. * gdb.dwarf2/dwzbuildid.exp (Dwarf::assemble): Remove partial_label and double_label. 2014-04-24 David Blaikie * gdb.python/lib-types.exp: Fix test and xfail under gcc due to gcc/55641. 2014-04-24 David Blaikie * gdb.cp/cpexprs.cc: Move braces to the same line as the start of the function to work across GCC and Clang. * gdb.cp/cpexprs.exp: Account for GCC/Clang difference in vtable pointer types (const void ** const V void **). 2014-04-24 Michael Sturm Walfred Tedeschi * Makefile.in (EXECUTABLES): Added i386-avx512. * gdb.arch/i386-avx512.c: New file. * gdb.arch/i386-avx512.exp: Likewise. 2014-04-23 Keith Seitz * lib/mi-support.exp (mi_list_breakpoints): Delete. (mi_make_breakpoint_table): New procedure. (mi_create_breakpoint): Use mi_make_breakpoint and return the result. (mi_make_breakpoint): New procedure. (mi_build_kv_pairs): New procedure. * gdb.mi/mi-break.exp: Remove unused globals, update mi_create_breakpoint usage, and use mi_make_breakpoint_table. All callers updated. * gdb.mi/mi-dprintf.exp: Use variable to track command number. Update all callers of mi_create_breakpoint and use mi_make_breakpoint_table. Remove any unused global variables. * gdb.mi/mi-nonstop.exp: Likewise. * gdb.mi/mi-nsintrall.exp: Likewise. * gdb.mi/mi-nsmoribund.exp: Likewise. * gdb.mi/mi-nsthrexec.exp: Likewise. * gdb.mi/mi-reverse.exp: Likewise. * gdb.mi/mi-simplerun.exp: Likewise. * gdb.mi/mi-stepn.exp: Likewise. * gdb.mi/mi-syn-frame.exp: Likewise. * gdb.mi/mi-until.exp: Likewise. * gdb.mi/mi-var-cp.exp: Likewise. * gdb.mi/mi-var-display.exp: Likewise. * gdb.mi/mi2-amd64-entry-value.exp: Likewise. * gdb.mi/mi2-var-child.exp: Likewise. * gdb.mi/mi-vla-c99.exp: Likewise. * lib/mi-support.exp: Likewise. From Ian Lance Taylor : * lib/gdb.exp (parse_args): New procedure. 2014-04-23 Pedro Alves * gdb.base/break-unload-file.c: New file. * gdb.base/break-unload-file.exp: New file. * gdb.base/sym-file-lib.c (baz): New function. * gdb.base/sym-file-loader.c (struct segment) : New field. (load): Store the segment's mapped size. (unload): New function. (unload_shlib): New function. * gdb.base/sym-file-loader.h (unload_shlib): New declaration. * gdb.base/sym-file-main.c (main): Unload, and reload the library, set a breakpoint at baz, and call it. * gdb.base/sym-file.exp: New tests for stale breakpoint instructions. 2014-04-23 Pedro Alves * gdb.base/hbreak-in-shr-unsupported-shr.c: New file. * gdb.base/hbreak-in-shr-unsupported.c: New file. * gdb.base/hbreak-in-shr-unsupported.exp: New file. * gdb.base/hbreak-unmapped.c: New file. * gdb.base/hbreak-unmapped.exp: New file. * gdb.trace/qtro.exp (gdb_is_target_remote): Move ... * lib/gdb.exp (gdb_is_target_remote): ... here. 2014-04-22 Pedro Alves * gdb.base/consecutive-step-over.c: New file. * gdb.base/consecutive-step-over.exp: New file. 2014-04-22 Pedro Alves * lib/gdb.exp (gdb_continue_to_breakpoint): Use gdb_test_multiple instead of send_gdb/gdb_expect. 2014-04-22 Yao Qi * lib/trace-support.exp (generate_tracefile): New procedure. * gdb.trace/tfile.exp: Skip the test if generate_tracefile return 0. * gdb.trace/mi-traceframe-changed.exp: Invoke test_tfind_tfile if generate_tracefile returns 1. 2014-04-18 Tom Tromey Pedro alves PR backtrace/15558 * gdb.opt/inline-bt.exp: Test backtracing from an inline function with a backtrace limit. * gdb.python/py-frame-inline.exp: Test running to an inline function with a backtrace limit, and printing the newest frame. * gdb.python/py-frame-inline.c (main): Call f. 2014-04-17 Marcus Shawcroft * gdb.java/jnpe.exp: Drop srcdir from untested path. 2014-04-17 Marcus Shawcroft * lib/gdb.exp (gdb_compile_pthreads, gdb_compile_objc): Drop prefix from unsupported source file path. 2014-04-17 Yao Qi * lib/gdb.exp (with_target_charset): New proc. * gdb.base/printcmds.exp (test_print_all_chars): Wrap tests with with_target_charset. (test_print_strings): Likewise. (test_repeat_bytes): Likewise. * gdb.base/setvar.exp: Set target-charset to ASCII temporarily for some tests. 2014-04-16 Keith Seitz PR gdb/15827 * gdb.dwarf2/corrupt.c: New file. * gdb.dwarf2/corrupt.exp: New file. 2014-04-16 Keith Seitz PR c++/16597 * gdb.cp/namelessclass.cc: New file. * gdb.cp/namelessclass.exp: New file. * gdb.cp/namelessclass.S: New file. 2014-04-16 Doug Evans * lib/gdbserver-support.exp (gdbserver_default_get_remote_address): Add comment. (gdbserver_default_get_comm_port): New function. (gdbserver_start): Check if board file provided "gdbserver,get_comm_port" and use it if so. * boards/native-stdio-gdbserver.exp (sockethost): Set to "". (gdb,socketport): Set to "stdio". (gdbserver,get_comm_port): Set to ${board}_get_comm_port. (stdio_gdbserver_template): Delete. (${board}_get_remote_address): Update. (${board}_build_remote_cmd): Delete. (${board}_get_comm_port): New function. (${board}_spawn): Update. * boards/remote-stdio-gdbserver.exp (${board}_build_remote_cmd): Delete. (${board}_get_remote_address): Update. (${board}_get_comm_port): New function. 2014-04-16 Andrew Burgess * gdb.base/memattr.exp: Improve regexps to handle memory regions appearing in any order. 2014-04-15 Doug Evans * gdb.gdb/selftest.exp (do_steps_and_nexts): Don't reference uninitialized value of "description". 2014-04-15 Keith Seitz * gdb.mi/mi-simplerun.exp (test_breakpoints_creation_and_listing): Remove unused globals. (test_running_the_program): Likewise. (test_controlled_execution): Likewise. (test_controlling_breakpoints): Likewise. (test_program_termination): Likewise. 2014-04-15 Keith Seitz * gdb.mi/mi-break.exp (test_tbreak_creation_and_listing): Remove unused globals. (test_rbreak_creation_and_listing): Likewise. (test_ignore_count): Likewise. (test_error): Likewise. 2014-04-15 Pedro Alves * gdb.base/sym-file-loader.h: Move inclusion of , , and to sym-file-loader.c. (Elf_External_Phdr, Elf_External_Ehdr, Elf_External_Shdr) (Elf_External_Sym, Elf_Addr, GET, GETADDR, struct segment): Move to sym-file-loader.c. (struct library): Forward declare. (load_shlib, lookup_function): Change prototypes. (find_shstrtab, find_strtab, find_shdr, find_symtab) (translate_offset): Remove declarations. (get_text_addr): New declaration. * gdb.base/sym-file-loader.c: Move inclusion of , , and here from sym-file-loader.h. (Elf_External_Phdr, Elf_External_Ehdr, Elf_External_Shdr) (Elf_External_Sym, Elf_Addr, GET, GETADDR, struct segment): Move here from sym-file-loader.h. (struct library): New structure. (load_shlib, lookup_function): Change prototypes and adjust to work with a struct library. (find_shstrtab, find_strtab, find_shdr, find_symtab) (translate_offset): Make static. (get_text_addr): New function. * gdb.base/sym-file-main.c (main): Adjust to new loader interface. 2014-04-15 Pedro Alves * gdb.base/sym-file-loader.c: Fix typo. SELF_LINK, not SELK_LINK. 2014-04-15 Pedro Alves * gdb.base/sym-file-loader.c: Include . (SELF_LINK): New define. (get_origin): New function. (load_shlib): Use it. * gdb.base/sym-file.exp: Don't early return if the target is remote. Use runto_main, and issue fail is that fails. Use gdb_load_shlibs. (shlib_name): Delete. (lib_so, lib_syms, lib_dlopen): New globals. Use them throughout. 2014-04-15 Pedro Alves * gdb.base/sym-file.exp: Remove regex characters from test message. Don't refer to breakpoint numbers in test messages. 2014-04-14 Keith Seitz PR c++/16253 * gdb.cp/var-tag.cc: New file. * gdb.cp/var-tag.exp: New file. * gdb.dwarf2/dw2-ada-ffffffff.exp: Set the language to C++. * gdb.dwarf2/dw2-anon-mptr.exp: Likewise. * gdb.dwarf2/dw2-double-set-die-type.exp: Likewise. * gdb.dwarf2/dw2-inheritance.exp: Likewise. 2014-04-14 Tom Tromey * gdb.cp/classes.exp (test_enums): Handle underlying type. * gdb.dwarf2/enum-type.exp: Add test for enum with underlying type. * gdb.cp/enum-class.exp: New file. * gdb.cp/enum-class.cc: New file. 2014-04-14 Tom Tromey * gdb.dwarf2/enum-type.exp: New file. 2014-04-14 Sanimir Agovic * gdb.mi/mi-vla-c99.exp: New file. * gdb.mi/vla.c: New file. 2014-04-14 Sanimir Agovic * gdb.base/vla-datatypes.c: New file. * gdb.base/vla-datatypes.exp: New file. 2014-04-14 Sanimir Agovic * gdb.base/vla-ptr.c: New file. * gdb.base/vla-ptr.exp: New file. 2014-04-14 Sanimir Agovic * gdb.dwarf2/count.exp: New file. 2014-04-14 Sanimir Agovic * gdb.base/vla-sideeffect.c: New file. * gdb.base/vla-sideeffect.exp: New file. 2014-04-14 David Blaikie * gdb.mi/non-stop.c: Add return value for non-void function return statement. * gdb.threads/staticthreads.c: Ditto. 2014-04-12 Siva Chandra Reddy Doug Evans * gdb.guile/scm-value.c: Improve test case. * gdb.guile/scm-value.exp: Add new test. 2014-04-11 David Blaikie * gdb.opt/inline-break.exp: Explicitly specify -std=gnu89 to override Clang's default. 2014-04-11 Joel Brobecker Revert the following changes (regressions): * gdb.base/vla-sideeffect.c: New file. * gdb.base/vla-sideeffect.exp: New file. * gdb.dwarf2/count.exp: New file. * gdb.base/vla-multi.c: New file. * gdb.base/vla-multi.exp: New file. * gdb.base/vla-ptr.c: New file. * gdb.base/vla-ptr.exp: New file. * gdb.base/vla-datatypes.c: New file. * gdb.base/vla-datatypes.exp: New file. * gdb.mi/mi-vla-c99.exp: New file. * gdb.mi/vla.c: New file. 2014-04-11 Keith Seitz PR c++/16675 * gdb.cp/cpsizeof.exp: New file. * gdb.cp/cpsizeof.cc: New file. 2014-04-11 Sanimir Agovic * gdb.mi/mi-vla-c99.exp: New file. * gdb.mi/vla.c: New file. 2014-04-11 Sanimir Agovic * gdb.base/vla-datatypes.c: New file. * gdb.base/vla-datatypes.exp: New file. 2014-04-11 Sanimir Agovic * gdb.base/vla-ptr.c: New file. * gdb.base/vla-ptr.exp: New file. 2014-04-11 Sanimir Agovic * gdb.base/vla-multi.c: New file. * gdb.base/vla-multi.exp: New file. 2014-04-11 Sanimir Agovic * gdb.dwarf2/count.exp: New file. 2014-04-11 Sanimir Agovic * gdb.base/vla-sideeffect.c: New file. * gdb.base/vla-sideeffect.exp: New file. 2014-04-11 Yao Qi * gdb.base/completion.exp: Check file exists before running tests on file completion. 2014-04-10 Pedro Alves * gdb.base/cond-eval-mode.c: New file. * gdb.base/cond-eval-mode.exp: Use standard_testfile. Adjust prepare_for_testing to build the new file. Check result of runto_main. (test_break, test_watch): New procedures. (top level): Use them. 2014-04-08 Pierre Muller * gdb.base/printcmds.exp (test_artificial_arrays): Disable Ctrl-V use for mingw hosts. 2014-04-07 Siva Chandra Reddy * gdb.python/py-value.c: Improve test case. * gdb.python/py-value.exp: Add new test. 2014-04-07 David Blaikie * lib/compiler.c: Identify the clang compiler. * lib/compiler.cc: Ditto. 2014-04-03 Yao Qi * gdb.base/setshow.exp: Invoke string_to_regexp to HOME and PWD. 2014-04-01 Anton Blanchard * gdb.arch/ppc64-atomic-inst.exp: Use untested. Make test messages unique. 2014-04-01 Anton Blanchard * gdb.arch/ppc64-atomic-inst.exp: Use standard_testfile, prepare_for_testing. 2014-04-01 Anton Blanchard * gdb.arch/ppc64-atomic-inst.c: Remove. * gdb.arch/ppc64-atomic-inst.S: New file. * gdb.arch/ppc64-atomic-inst.exp: Adapt for asm based testcase. 2014-03-31 Doug Evans * gdb.base/print-symbol-loading-lib.c: New file. * gdb.base/print-symbol-loading-main.c: New file. * gdb.base/print-symbol-loading.exp: New file. 2014-03-31 Yao Qi * gdb.base/source-dir.exp: Allow ';' as a directory separator. 2014-03-28 Joel Brobecker * gdb.ada/mi_dyn_arr: New testcase. 2014-03-27 Doug Evans * gdb.dwarf2/dw2-abs-hi-pc.exp: Build tests with "nodebug". 2014-03-27 Yao Qi * lib/gdb.exp (can_single_step_to_signal_handler): Return zero if target is nios2-*-*. 2014-03-26 Yao Qi * lib/gdb.exp (readline_is_used): New proc. * gdb.base/completion.exp: Move tests on command complete up. Skip the rest of tests if readline is not used. * gdb.ada/complete.exp: Skp the test if readline is not used. * gdb.base/filesym.exp: Likewise. * gdb.base/macscp.exp: Likewise. * gdb.base/readline-ask.exp: Likewise. * gdb.base/readline.exp: Likewise. * gdb.python/py-cmd.exp: Likewise. * gdb.trace/tfile.exp: Likewise. 2014-03-26 Yao Qi * gdb.base/macscp.exp: Fix code format issues. 2014-03-25 Ulrich Weigand * gdb.asm/asm-source.exp: Handle powerpc64le-* targets. * gdb.asm/powerpc64le.inc: New file. 2014-03-25 Pedro Alves Doug Evans * gdb.base/source-execution.c: New file. * gdb.base/source-execution.exp: New file. * gdb.base/source-execution.gdb: New file. 2014-03-24 Doug Evans * gdb.linespec/macro-relative.exp: Mark the test as unsupported if using fission. 2014-03-24 Hui Zhu Pedro Alves PR breakpoints/16101 * gdb.base/dprintf.exp: Use unsupported rather than changing the test pass/fail messages. Detect missing support for dprintf when breakpoints are actually inserted. * gdb.base/mi-dprintf.exp: Detect missing support for dprintf when breakpoints are actually inserted. * lib/mi-support.exp (mi_run_cmd_full): Return -1 if continue fails. 2014-03-24 Jan Kratochvil * gdb.base/gdb-sigterm.exp (do_test): Remove "set debug lin-lwp 1". 2014-03-22 Doug Evans * gdb.python/python.exp (python not supported): Verify multi-line python command issues an error. * gdb.guile/guile.exp (guile not supported): Verify multi-line guile command issues an error. 2014-03-21 Maciej W. Rozycki * gdb.threads/thread-specific.exp: Handle the lack of usable $this_breakpoint and $this_thread. 2014-03-21 Hui Zhu * gdb.base/attach.exp (do_command_attach_tests): New. 2014-03-20 Tom Tromey Pedro Alves PR cli/15718 * gdb.base/condbreak-call-false.c: New file. * gdb.base/condbreak-call-false.exp: New file. 2014-03-20 Pedro Alves * gdb.threads/signal-while-stepping-over-bp-other-thread.c (pid): Delete. (block_signals, unblock_signals): Delete. (child_function_2, main): Remove references to deleted variable and functions. 2014-03-20 Pedro Alves * gdb.threads/signal-while-stepping-over-bp-other-thread.c (main): Use pthread_kill to signal thread 2. * gdb.threads/signal-while-stepping-over-bp-other-thread.exp: Adjust to make the test send itself a signal rather than using the host's "kill" command. 2014-03-20 Pedro Alves * gdb.threads/multiple-step-overs.c: New file. * gdb.threads/multiple-step-overs.exp: New file. * gdb.threads/signal-while-stepping-over-bp-other-thread.exp: Adjust expected infrun debug output. 2014-03-20 Pedro Alves * gdb.threads/step-over-trips-on-watchpoint.c: New file. * gdb.threads/step-over-trips-on-watchpoint.exp: New file. 2014-03-20 Pedro Alves PR breakpoints/7143 * gdb.base/watchpoint.exp: Mention bugzilla bug number instead of old gnats gdb/38. Remove kfail. Adjust to use gdb_test instead of gdb_test_multiple. * gdb.cp/annota2.exp: Remove kfail for gdb/38. * gdb.cp/annota3.exp: Remove kfail for gdb/38. 2014-03-20 Pedro Alves * gdb.threads/step-over-lands-on-breakpoint.c: New file. * gdb.threads/step-over-lands-on-breakpoint.exp: New file. 2014-03-19 Pedro Alves * gdb.base/async.exp: Remove early return. 2014-03-19 Pedro Alves * gdb.base/async.exp (step& tests): Pass explicit test messages. 2014-03-19 Pedro Alves * gdb.base/async.exp (test_background): Expect \r\n after "completed." in the fail pattern. 2014-03-19 Pedro Alves * gdb.base/async.exp (test_background): New procedure. Use it for all background execution command tests. 2014-03-19 Pedro Alves * gdb.base/async.exp: Use prepare_for_testing. 2014-03-19 Pedro Alves * gdb.base/async.c (foo): Make 'x' volatile. Write to it twice in the same line. 2014-03-19 Pedro Alves * gdb.base/async.c (main): Add "jump here" and "until here" line marker comments. * gdb.base/async.exp (jump_here): New global. (jump& test): Use it. (until_here): New global. (until& test): Use it. 2014-03-19 Pedro Alves * gdb.base/async.exp: Don't frob gdb_protocol. 2014-03-18 Doug Evans * gdb.base/async.exp: Whitespace fixes. Turn on target-async. Fix spelling of exec-done-display. 2014-03-18 Jan Kratochvil PR gdb/15358 * gdb.base/gdb-sigterm.c: New file. * gdb.base/gdb-sigterm.exp: New file. 2014-03-18 Pedro Alves PR gdb/13860 * gdb.mi/mi-solib.exp: Remove gdb/13860 kfail. * lib/mi-support.exp (mi_expect_stop): Add special handling for solib-event. 2014-03-17 Joel Brobecker * gdb.ada/pckd_arr_ren: New testcase. 2014-03-13 Doug Evans PR guile/16612 * gdb.guile/scm-value.ep (test_value_after_death): Do a garbage collect after discarding symbols. 2014-03-13 Ludovic Courtès Doug Evans * gdb.guile/scm-value.exp (test_value_in_inferior): Verify value added to history survives a gc. 2014-03-13 Pedro Alves * gdb.base/default.exp: Don't test "target procfs". 2014-03-13 Pedro Alves * gdb.base/default.exp: Update "target child" and "target procfs" tests to not expect "Unix". 2014-03-12 Tom Tromey * gdb.base/corefile.exp (corefile_test_run, corefile_test_attach): New procs. Add target-async tests. * gdb.reverse/break-precsave.exp (precsave_tests): New proc. Add target-async tests. 2014-03-12 Andreas Arnez * gdb.dwarf2/dw2-ifort-parameter.c (func): Define labels 'func_start' and 'func_end' for the beginning and end of the function code, respectively. * gdb.dwarf2/dw2-ifort-parameter.exp: Use 'func_start' and 'func_end' instead of 'func' and 'main'. 2014-03-12 Andreas Arnez * gdb.dwarf2/dw2-ifort-parameter-debug.S: Remove. * gdb.dwarf2/dw2-ifort-parameter.exp: Use Dwarf::assemble to generate the debug info assembler source. 2014-03-12 Andreas Arnez * gdb.dwarf2/arr-stride.exp: Exploit 'prepare_for_testing'. * gdb.dwarf2/arr-subrange.exp: Likewise. * gdb.dwarf2/dwz.exp: Likewise. * gdb.dwarf2/method-ptr.exp: Likewise. * gdb.dwarf2/missing-sig-type.exp: Likewise. * gdb.dwarf2/subrange.exp: Likewise. * gdb.dwarf2/implptrconst.exp: Exploit 'build_executable'. * gdb.dwarf2/implptrpiece.exp: Likewise. * gdb.dwarf2/nostaticblock.exp: Likewise. 2014-03-12 Andreas Arnez * lib/gdb.exp (build_executable_from_specs): Don't prepend source directory to absolute path name arguments. 2014-03-10 Joel Brobecker * gdb.ada/tagged_access: New testcase. 2014-03-07 Markus Metzger * gdb.btrace/data.exp: Update expected output. 2014-03-06 Yao Qi * gdb.trace/pr16508.exp: New file. 2014-03-05 Pedro Alves PR gdb/16575 * gdb.base/breakpoint-shadow.exp (compare_disassembly): New procedure. (top level): Adjust to use it. Add tests that exercise breakpoint interaction with the code-cache. 2014-02-26 Ludovic Courtès * gdb.guile/scm-value.exp (test_value_in_inferior): Add test for 'history-append!'. 2014-02-26 Joel Brobecker * gdb.dwarf2/dw2-abs-hi-pc-hello-dbg.S: New file. * gdb.dwarf2/dw2-abs-hi-pc-hello.c: New file. * gdb.dwarf2/dw2-abs-hi-pc-world-dbg.S: New file. * gdb.dwarf2/dw2-abs-hi-pc-world.c: New file. * gdb.dwarf2/dw2-abs-hi-pc.c: New file. * gdb.dwarf2/dw2-abs-hi-pc.exp: New file. 2014-02-26 Joel Brobecker * testsuite/gdb.python/py-pp-re-notag.c: New file. * testsuite/gdb.python/py-pp-re-notag.ex: New file. * testsuite/gdb.python/py-pp-re-notag.p: New file. 2014-02-26 Joel Brobecker * gdb.dwarf2/arr-subrange.c, gdb.dwarf2/arr-subrange.exp: New files. 2014-02-26 Joel Brobecker * gdb.dwarf2/arr-stride.c: New file. * gdb.dwarf2/arr-stride.exp: New file. 2014-02-26 Pedro Alves * gdb.ada/tasks.exp: Set a task-specific breakpoint at break_me that won't ever trigger. Make sure that GDB reports the correct breakpoint that caused the stop. 2014-02-25 Jan Kratochvil PR gdb/16626 * gdb.base/auto-load-script: New file. * gdb.base/auto-load.c: New file. * gdb.base/auto-load.exp: New file. PR gdb/16626 * gdb.base/auto-load.exp: Fix out-of-srctree run. 2014-02-25 Jan Kratochvil Fix dw2-icycle.exp -fsanitize=address GDB crash. * gdb.dwarf2/dw2-icycle.S: Remove all DW_AT_sibling. 2014-02-24 Doug Evans * lib/gdb.exp (run_on_host): Log error output if program fails. 2014-02-21 Pedro Alves * gdb.threads/step-after-sr-lock.c: Rename to ... * gdb.threads/signal-while-stepping-over-bp-other-thread.c: ... this. * gdb.threads/step-after-sr-lock.exp: Rename to ... * gdb.threads/signal-while-stepping-over-bp-other-thread.exp: ... this. 2014-02-20 Sergio Durigan Junior PR tdep/16397 * gdb.arch/amd64-stap-special-operands.exp: New file. * gdb.arch/amd64-stap-three-arg-disp.S: Likewise. * gdb.arch/amd64-stap-three-arg-disp.c: Likewise. * gdb.arch/amd64-stap-triplet.S: Likewise. * gdb.arch/amd64-stap-triplet.c: Likewise. 2014-02-20 Joel Brobecker * gdb.dwarf2/dw2-icycle.S: Remove second and third parameters in .section pseudo-op. 2014-02-20 lin zuojian Joel Brobecker Doug Evans PR symtab/16581 * gdb.dwarf2/dw2-icycle.S: New file. * gdb.dwarf2/dw2-icycle.c: New file. * gdb.dwarf2/dw2-icycle.exp: New file. 2014-02-19 Siva Chandra Reddy * gdb.python/py-value-cc.cc: Improve test case to enable testing operations on gdb.Value objects. * gdb.python/py-value-cc.exp: Add new test to test operations on gdb.Value objects. 2014-02-18 Doug Evans * Makefile.in (TESTS): New variable. (expanded_tests, expanded_tests_or_none): New variables (check-single): Pass $(expanded_tests_or_none) to runtest. (check-parallel): Only run tests in $(TESTS) if non-empty. (check/no-matching-tests-found): New rule. * README: Document TESTS makefile variable. 2014-02-18 Doug Evans * Makefile.in (check-parallel): rm -rf outputs temp. 2014-02-16 Jan Kratochvil Fix "ERROR: no fileid for" in the testsuite. * lib/gdb.exp (gdb_finish): Check gdb_spawn_id. 2014-02-12 Doug Evans * gdb.dwarf2/Makefile.in (EXECUTABLES): Add dwp-symlink. (MISCELLANEOUS): New variable. (clean): rm -rf $(MISCELLANEOUS). * gdb.dwarf2/dwp-symlink.exp: Test the case where the executable and dwp live in the same directory as symlinks, with each symlink pointed to a differently named file in a different directory. 2014-02-11 Doug Evans * gdb.dwarf2/dwp-symlink.exp: Rewrite to use remote_* commands instead of Tcl file commands. 2014-02-10 Mark Kettenis * gdb.threads/step-after-sr-lock.exp: Avoid executing "kill -SIGUSR1 -1". 2014-02-10 Joel Brobecker * gdb.ada/tick_length_array_enum_idx: New testcase. 2014-02-10 Doug Evans * configure.ac (AC_OUTPUT): Add gdb.guile. * configure: Regenerate. * lib/gdb-guile.exp: New file. * lib/gdb.exp (get_target_charset): New function. * gdb.base/help.exp: Update expected output from "apropos apropos". * gdb.guile/Makefile.in: New file. * gdb.guile/guile.exp: New file. * gdb.guile/scm-arch.c: New file. * gdb.guile/scm-arch.exp: New file. * gdb.guile/scm-block.c: New file. * gdb.guile/scm-block.exp: New file. * gdb.guile/scm-breakpoint.c: New file. * gdb.guile/scm-breakpoint.exp: New file. * gdb.guile/scm-disasm.c: New file. * gdb.guile/scm-disasm.exp: New file. * gdb.guile/scm-equal.c: New file. * gdb.guile/scm-equal.exp: New file. * gdb.guile/scm-error.exp: New file. * gdb.guile/scm-error.scm: New file. * gdb.guile/scm-frame-args.c: New file. * gdb.guile/scm-frame-args.exp: New file. * gdb.guile/scm-frame-args.scm: New file. * gdb.guile/scm-frame-inline.c: New file. * gdb.guile/scm-frame-inline.exp: New file. * gdb.guile/scm-frame.c: New file. * gdb.guile/scm-frame.exp: New file. * gdb.guile/scm-generics.exp: New file. * gdb.guile/scm-gsmob.exp: New file. * gdb.guile/scm-iterator.c: New file. * gdb.guile/scm-iterator.exp: New file. * gdb.guile/scm-math.c: New file. * gdb.guile/scm-math.exp: New file. * gdb.guile/scm-objfile-script-gdb.in: New file. * gdb.guile/scm-objfile-script.c: New file. * gdb.guile/scm-objfile-script.exp: New file. * gdb.guile/scm-objfile.c: New file. * gdb.guile/scm-objfile.exp: New file. * gdb.guile/scm-ports.exp: New file. * gdb.guile/scm-pretty-print.c: New file. * gdb.guile/scm-pretty-print.exp: New file. * gdb.guile/scm-pretty-print.scm: New file. * gdb.guile/scm-section-script.c: New file. * gdb.guile/scm-section-script.exp: New file. * gdb.guile/scm-section-script.scm: New file. * gdb.guile/scm-symbol.c: New file. * gdb.guile/scm-symbol.exp: New file. * gdb.guile/scm-symtab-2.c: New file. * gdb.guile/scm-symtab.c: New file. * gdb.guile/scm-symtab.exp: New file. * gdb.guile/scm-type.c: New file. * gdb.guile/scm-type.exp: New file. * gdb.guile/scm-value-cc.cc: New file. * gdb.guile/scm-value-cc.exp: New file. * gdb.guile/scm-value.c: New file. * gdb.guile/scm-value.exp: New file. * gdb.guile/source2.scm: New file. * gdb.guile/types-module.cc: New file. * gdb.guile/types-module.exp: New file. 2014-02-10 Yao Qi PR testsuite/16543 * configure.ac: Append gdb.gdb/Makefile in AC_OUTPUT. * configure: Regenerated. * Makefile.in: New file. 2014-02-08 Andreas Schwab * gdb.python/py-framefilter.exp: Fix typo. 2014-02-08 Yao Qi * gdb.mi/mi-breakpoint-changed.exp (test_insert_delete_modify): Test that no =breakpoint-modified is emitted when breakpoints are modified through MI commands. 2014-02-07 Pedro Alves Pedro Alves * gdb.threads/step-after-sr-lock.c: New file. * gdb.threads/step-after-sr-lock.exp: New file. 2014-02-07 Pedro Alves * gdb.threads/stepi-random-signal.exp: Set SIGCHLD to print. 2014-02-06 Jan Kratochvil Fix i386-sse-stack-align.exp regression since GDB_PARALLEL. * gdb.arch/i386-sse-stack-align.exp: Use standard_output_file. 2014-02-06 Doug Evans * gdb.python/py-breakpoint.exp (test_bkpt_eval_funcs): Update expected output. * gdb.gdb/python-interrupts.exp: New file. 2014-02-05 Yao Qi * gdb.trace/report.exp (use_collected_data): Test the output of "info threads" and "info inferiors". 2014-02-05 Yao Qi Revert this patch: 2013-05-24 Yao Qi * gdb.trace/tfile.exp: Test inferior and thread. 2014-02-04 Ulrich Weigand * gdb.base/sigbpt.exp: Do not use "*" when setting breakpoint on a function. * gdb.base/step-bt.c: Call hello via function pointer to make sure its first instruction is executed on powerpc64le-linux. 2014-02-04 Ulrich Weigand * gdb.arch/powerpc-d128-regs.exp: Enable on powerpc64*-*. 2014-02-04 Ulrich Weigand * gdb.arch/vsx-regs.exp: Check target endianness. Provide variants of the test patterns for use on little-endian systems. 2014-02-04 Ulrich Weigand * gdb.arch/altivec-regs.exp: Use gdb_test_multiple for endian test. (decimal_vector): Fix for little-endian. 2014-01-29 Jose E. Marchesi * gdb.arch/sparc-sysstep.exp: New file. * gdb.arch/sparc-sysstep.c: Likewise. * gdb.arch/Makefile.in (EXECUTABLES): Add sparc-sysstep. 2014-01-28 Edjunior Barbosa Machado * gdb.base/info-shared.exp: Expect leading `.' on ppc64's symbols. 2014-01-23 Tom Tromey * gdb.ada/array_char_idx: New testcase. 2014-01-23 Tom Tromey PR python/16487: * gdb.python/py-framefilter.exp: Add test using "Error" filter. * gdb.python/py-framefilter.py (ErrorInName, ErrorFilter): New classes. 2014-01-23 Tom Tromey PR python/16491: * gdb.python/py-framefilter.py (Reverse_Function.function): Read a string from an inferior frame. * gdb.python/py-framefilter-mi.exp: Update. 2014-01-22 Doug Evans * gdb.server/server-mon.exp: Add tests for "set debug-format". 2014-01-22 Andreas Arnez * gdb.base/catch-syscall.exp: Activate test on s390*-linux. 2014-01-22 Andreas Arnez * gdb.trace/entry-values.exp: Remove excess space character from regex patterns. Handle s390 call instruction. 2014-01-22 Andreas Arnez * gdb.dwarf2/dw2-dir-file-name.c (FUNC): Insert alignment and define "*_start" label. Make "name" static. * gdb.dwarf2/dw2-dir-file-name.exp: Replace references to ${name} by references to ${name}_start. 2014-01-22 Andreas Arnez * gdb.base/info-macros.exp: Remove "debug" from the compile options. 2014-01-17 Iain Buclaw * gdb.dlang/demangle.exp: New file. 2014-01-17 Iain Buclaw * gdb.dlang/primitive-types.exp: New file. 2014-01-17 Iain Buclaw * configure.ac: Create gdb.dlang/Makefile. * configure: Regenerate. * Makefile.in (ALL_SUBDIRS): Add gdb.dlang. * gdb.dlang/Makefile.in: New file. * lib/d-support.exp: New file. * lib/gdb.exp (skip_d_tests): New proc. 2014-01-16 Markus Metzger * gdb.btrace/delta.exp: Check reverse stepi. * gdb.btrace/tailcall.exp: Update. Add stepping tests. * gdb.btrace/finish.exp: New. * gdb.btrace/next.exp: New. * gdb.btrace/nexti.exp: New. * gdb.btrace/record_goto.c: Add comments. * gdb.btrace/step.exp: New. * gdb.btrace/stepi.exp: New. * gdb.btrace/multi-thread-step.c: New. * gdb.btrace/multi-thread-step.exp: New. * gdb.btrace/rn-dl-bind.c: New. * gdb.btrace/rn-dl-bind.exp: New. * gdb.btrace/data.c: New. * gdb.btrace/data.exp: New. * gdb.btrace/Makefile.in (EXECUTABLES): Add new. 2014-01-16 Markus Metzger * gdb.btrace/Makefile.in (EXECUTABLES): Add delta. * gdb.btrace/exception.exp: Update. * gdb.btrace/instruction_history.exp: Update. * gdb.btrace/record_goto.exp: Update. * gdb.btrace/tailcall.exp: Update. * gdb.btrace/unknown_functions.exp: Update. * gdb.btrace/delta.exp: New. 2014-01-16 Markus Metzger * gdb.btrace/record_goto.exp: Add backtrace test. * gdb.btrace/tailcall.exp: Add backtrace test. 2014-01-16 Markus Metzger * gdb.btrace/Makefile.in (EXECUTABLES): Add record_goto. * gdb.btrace/record_goto.c: New. * gdb.btrace/record_goto.exp: New. * gdb.btrace/x86-record_goto.S: New. 2014-01-16 Markus Metzger * gdb.btrace/function_call_history.exp: Update tests. * gdb.btrace/instruction_history.exp: Update tests. 2014-01-16 Markus Metzger * gdb.btrace/function_call_history.exp: Fix expected field order for "record function-call-history". Add new tests for "record function-call-history /c". * gdb.btrace/exception.cc: New. * gdb.btrace/exception.exp: New. * gdb.btrace/tailcall.exp: New. * gdb.btrace/x86-tailcall.S: New. * gdb.btrace/x86-tailcall.c: New. * gdb.btrace/unknown_functions.c: New. * gdb.btrace/unknown_functions.exp: New. * gdb.btrace/Makefile.in (EXECUTABLES): Add new. 2014-01-16 Markus Metzger * gdb.btrace/instruction_history.exp: Update. * gdb.btrace/function_call_history.exp: Update. 2014-01-16 Markus Metzger * gdb.btrace/function_call_history.exp: Fix expected function trace. * gdb.btrace/instruction_history.exp: Initialize traced. Remove traced_functions. 2014-01-16 Markus Metzger * gdb.btrace/function_call_history.exp: Update * gdb.btrace/instruction_history.exp: Update. 2014-01-16 Markus Metzger * gdb.btrace/enable.exp: Update expected text. 2014-01-16 Omair Javaid * gdb.dwarf2/dw2-dos-drive.S: Increase text section size to 4 bytes. 2014-01-15 Maciej W. Rozycki * gdb.base/float.exp: Handle "aarch64*-*-*" targets. 2014-01-15 Omair Javaid * lib/gdb.exp (supports_process_record): Return true for arm*-linux*. (supports_reverse): Likewise. 2014-01-13 Siva Chandra Reddy PR python/15464 PR python/16113 * gdb.python/py-type.c: Enhance test case. * gdb.python/py-value-cc.cc: Likewise * gdb.python/py-type.exp: Add new tests. * gdb.python/py-value-cc.exp: Likewise 2014-01-10 Andreas Arnez Pedro Alves * gdb.dwarf2/dw2-dir-file-name.c (FUNC): Remove "*_start" symbol. Make "name" extern. * gdb.dwarf2/dw2-dir-file-name.exp (out_cu, out_line): Replace references to ${name}_start by references to ${name}. 2014-01-10 Joel Brobecker * gdb.ada/pp-rec-component.exp: Remove path from "source" test. 2014-01-10 Joel Brobecker * gdb.python/py-pp-integral.exp: Remove path from "source" test. 2014-01-09 Maciej W. Rozycki Pedro Alves * gdb.mi/mi-info-os.exp: Connect to the target with mi_gdb_target_load. 2014-01-08 Pedro Alves * gdb.threads/reconnect-signal.c: New file. * gdb.threads/reconnect-signal.exp: New file. 2014-01-07 Jan Kratochvil * gdb.base/source-dir.exp: New file. 2014-01-07 Joel Brobecker * gdb.ada/mi_interface: New testcase. 2014-01-07 Joel Brobecker * gdb.ada/pp-rec-component.exp, gdb.ada/pp-rec-component.py, gdb.ada/pp-rec-component/foo.adb, gdb.ada/pp-rec-component/pck.adb, gdb.ada/pp-rec-component/pck.ads: New files. 2014-01-07 Joel Brobecker * gdb.python/py-pp-integral.c: New file. * gdb.python/py-pp-integral.py: New file. * gdb.python/py-pp-integral.exp: New file. For older changes see ChangeLog-1993-2013. ;; Local Variables: ;; mode: change-log ;; left-margin: 8 ;; fill-column: 74 ;; version-control: never ;; End: Copyright 2014-2015 Free Software Foundation, Inc. Copying and distribution of this file, with or without modification, are permitted provided the copyright notice and this notice are preserved.