/* Target-dependent code for GNU/Linux SPARC.
Copyright (C) 2003, 2004, 2005, 2007, 2008, 2009, 2010, 2011
Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see . */
#include "defs.h"
#include "dwarf2-frame.h"
#include "frame.h"
#include "frame-unwind.h"
#include "gdbtypes.h"
#include "regset.h"
#include "gdbarch.h"
#include "gdbcore.h"
#include "osabi.h"
#include "regcache.h"
#include "solib-svr4.h"
#include "symtab.h"
#include "trad-frame.h"
#include "tramp-frame.h"
#include "xml-syscall.h"
#include "linux-tdep.h"
/* The syscall's XML filename for sparc 32-bit. */
#define XML_SYSCALL_FILENAME_SPARC32 "syscalls/sparc-linux.xml"
#include "sparc-tdep.h"
/* Signal trampoline support. */
static void sparc32_linux_sigframe_init (const struct tramp_frame *self,
struct frame_info *this_frame,
struct trad_frame_cache *this_cache,
CORE_ADDR func);
/* GNU/Linux has two flavors of signals. Normal signal handlers, and
"realtime" (RT) signals. The RT signals can provide additional
information to the signal handler if the SA_SIGINFO flag is set
when establishing a signal handler using `sigaction'. It is not
unlikely that future versions of GNU/Linux will support SA_SIGINFO
for normal signals too. */
/* When the sparc Linux kernel calls a signal handler and the
SA_RESTORER flag isn't set, the return address points to a bit of
code on the stack. This code checks whether the PC appears to be
within this bit of code.
The instruction sequence for normal signals is encoded below.
Checking for the code sequence should be somewhat reliable, because
the effect is to call the system call sigreturn. This is unlikely
to occur anywhere other than a signal trampoline. */
static const struct tramp_frame sparc32_linux_sigframe =
{
SIGTRAMP_FRAME,
4,
{
{ 0x821020d8, -1 }, /* mov __NR_sugreturn, %g1 */
{ 0x91d02010, -1 }, /* ta 0x10 */
{ TRAMP_SENTINEL_INSN, -1 }
},
sparc32_linux_sigframe_init
};
/* The instruction sequence for RT signals is slightly different. The
effect is to call the system call rt_sigreturn. */
static const struct tramp_frame sparc32_linux_rt_sigframe =
{
SIGTRAMP_FRAME,
4,
{
{ 0x82102065, -1 }, /* mov __NR_rt_sigreturn, %g1 */
{ 0x91d02010, -1 }, /* ta 0x10 */
{ TRAMP_SENTINEL_INSN, -1 }
},
sparc32_linux_sigframe_init
};
static void
sparc32_linux_sigframe_init (const struct tramp_frame *self,
struct frame_info *this_frame,
struct trad_frame_cache *this_cache,
CORE_ADDR func)
{
CORE_ADDR base, addr, sp_addr;
int regnum;
base = get_frame_register_unsigned (this_frame, SPARC_O1_REGNUM);
if (self == &sparc32_linux_rt_sigframe)
base += 128;
/* Offsets from . */
trad_frame_set_reg_addr (this_cache, SPARC32_PSR_REGNUM, base + 0);
trad_frame_set_reg_addr (this_cache, SPARC32_PC_REGNUM, base + 4);
trad_frame_set_reg_addr (this_cache, SPARC32_NPC_REGNUM, base + 8);
trad_frame_set_reg_addr (this_cache, SPARC32_Y_REGNUM, base + 12);
/* Since %g0 is always zero, keep the identity encoding. */
addr = base + 20;
sp_addr = base + 16 + ((SPARC_SP_REGNUM - SPARC_G0_REGNUM) * 4);
for (regnum = SPARC_G1_REGNUM; regnum <= SPARC_O7_REGNUM; regnum++)
{
trad_frame_set_reg_addr (this_cache, regnum, addr);
addr += 4;
}
base = get_frame_register_unsigned (this_frame, SPARC_SP_REGNUM);
addr = get_frame_memory_unsigned (this_frame, sp_addr, 4);
for (regnum = SPARC_L0_REGNUM; regnum <= SPARC_I7_REGNUM; regnum++)
{
trad_frame_set_reg_addr (this_cache, regnum, addr);
addr += 4;
}
trad_frame_set_id (this_cache, frame_id_build (base, func));
}
/* Return the address of a system call's alternative return
address. */
static CORE_ADDR
sparc32_linux_step_trap (struct frame_info *frame, unsigned long insn)
{
if (insn == 0x91d02010)
{
ULONGEST sc_num = get_frame_register_unsigned (frame, SPARC_G1_REGNUM);
/* __NR_rt_sigreturn is 101 and __NR_sigreturn is 216 */
if (sc_num == 101 || sc_num == 216)
{
struct gdbarch *gdbarch = get_frame_arch (frame);
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
ULONGEST sp, pc_offset;
sp = get_frame_register_unsigned (frame, SPARC_SP_REGNUM);
/* The kernel puts the sigreturn registers on the stack,
and this is where the signal unwinding state is take from
when returning from a signal.
For __NR_sigreturn, this register area sits 96 bytes from
the base of the stack. The saved PC sits 4 bytes into the
sigreturn register save area.
For __NR_rt_sigreturn a siginfo_t, which is 128 bytes, sits
right before the sigreturn register save area. */
pc_offset = 96 + 4;
if (sc_num == 101)
pc_offset += 128;
return read_memory_unsigned_integer (sp + pc_offset, 4, byte_order);
}
}
return 0;
}
const struct sparc_gregset sparc32_linux_core_gregset =
{
32 * 4, /* %psr */
33 * 4, /* %pc */
34 * 4, /* %npc */
35 * 4, /* %y */
-1, /* %wim */
-1, /* %tbr */
1 * 4, /* %g1 */
16 * 4, /* %l0 */
4, /* y size */
};
static void
sparc32_linux_supply_core_gregset (const struct regset *regset,
struct regcache *regcache,
int regnum, const void *gregs, size_t len)
{
sparc32_supply_gregset (&sparc32_linux_core_gregset, regcache, regnum, gregs);
}
static void
sparc32_linux_collect_core_gregset (const struct regset *regset,
const struct regcache *regcache,
int regnum, void *gregs, size_t len)
{
sparc32_collect_gregset (&sparc32_linux_core_gregset, regcache, regnum, gregs);
}
static void
sparc32_linux_supply_core_fpregset (const struct regset *regset,
struct regcache *regcache,
int regnum, const void *fpregs, size_t len)
{
sparc32_supply_fpregset (regcache, regnum, fpregs);
}
static void
sparc32_linux_collect_core_fpregset (const struct regset *regset,
const struct regcache *regcache,
int regnum, void *fpregs, size_t len)
{
sparc32_collect_fpregset (regcache, regnum, fpregs);
}
/* Set the program counter for process PTID to PC. */
#define PSR_SYSCALL 0x00004000
static void
sparc_linux_write_pc (struct regcache *regcache, CORE_ADDR pc)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (get_regcache_arch (regcache));
ULONGEST psr;
regcache_cooked_write_unsigned (regcache, tdep->pc_regnum, pc);
regcache_cooked_write_unsigned (regcache, tdep->npc_regnum, pc + 4);
/* Clear the "in syscall" bit to prevent the kernel from
messing with the PCs we just installed, if we happen to be
within an interrupted system call that the kernel wants to
restart.
Note that after we return from the dummy call, the PSR et al.
registers will be automatically restored, and the kernel
continues to restart the system call at this point. */
regcache_cooked_read_unsigned (regcache, SPARC32_PSR_REGNUM, &psr);
psr &= ~PSR_SYSCALL;
regcache_cooked_write_unsigned (regcache, SPARC32_PSR_REGNUM, psr);
}
static LONGEST
sparc32_linux_get_syscall_number (struct gdbarch *gdbarch,
ptid_t ptid)
{
struct regcache *regcache = get_thread_regcache (ptid);
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
/* The content of a register. */
gdb_byte buf[4];
/* The result. */
LONGEST ret;
/* Getting the system call number from the register.
When dealing with the sparc architecture, this information
is stored at the %g1 register. */
regcache_cooked_read (regcache, SPARC_G1_REGNUM, buf);
ret = extract_signed_integer (buf, 4, byte_order);
return ret;
}
static void
sparc32_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
linux_init_abi (info, gdbarch);
tdep->gregset = regset_alloc (gdbarch, sparc32_linux_supply_core_gregset,
sparc32_linux_collect_core_gregset);
tdep->sizeof_gregset = 152;
tdep->fpregset = regset_alloc (gdbarch, sparc32_linux_supply_core_fpregset,
sparc32_linux_collect_core_fpregset);
tdep->sizeof_fpregset = 396;
tramp_frame_prepend_unwinder (gdbarch, &sparc32_linux_sigframe);
tramp_frame_prepend_unwinder (gdbarch, &sparc32_linux_rt_sigframe);
/* GNU/Linux has SVR4-style shared libraries... */
set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target);
set_solib_svr4_fetch_link_map_offsets
(gdbarch, svr4_ilp32_fetch_link_map_offsets);
/* ...which means that we need some special handling when doing
prologue analysis. */
tdep->plt_entry_size = 12;
/* Enable TLS support. */
set_gdbarch_fetch_tls_load_module_address (gdbarch,
svr4_fetch_objfile_link_map);
/* Make sure we can single-step over signal return system calls. */
tdep->step_trap = sparc32_linux_step_trap;
/* Hook in the DWARF CFI frame unwinder. */
dwarf2_append_unwinders (gdbarch);
set_gdbarch_write_pc (gdbarch, sparc_linux_write_pc);
/* Functions for 'catch syscall'. */
set_xml_syscall_file_name (XML_SYSCALL_FILENAME_SPARC32);
set_gdbarch_get_syscall_number (gdbarch,
sparc32_linux_get_syscall_number);
}
/* Provide a prototype to silence -Wmissing-prototypes. */
extern void _initialize_sparc_linux_tdep (void);
void
_initialize_sparc_linux_tdep (void)
{
gdbarch_register_osabi (bfd_arch_sparc, 0, GDB_OSABI_LINUX,
sparc32_linux_init_abi);
}