/* Target-dependent code for GDB, the GNU debugger. Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 2000, 2001 Free Software Foundation, Inc. This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include "defs.h" #include "frame.h" #include "inferior.h" #include "symtab.h" #include "target.h" #include "gdbcore.h" #include "gdbcmd.h" #include "symfile.h" #include "objfiles.h" #include "arch-utils.h" #include "bfd/libbfd.h" /* for bfd_default_set_arch_mach */ #include "coff/internal.h" /* for libcoff.h */ #include "bfd/libcoff.h" /* for xcoff_data */ #include "elf-bfd.h" #include "ppc-tdep.h" /* If the kernel has to deliver a signal, it pushes a sigcontext structure on the stack and then calls the signal handler, passing the address of the sigcontext in an argument register. Usually the signal handler doesn't save this register, so we have to access the sigcontext structure via an offset from the signal handler frame. The following constants were determined by experimentation on AIX 3.2. */ #define SIG_FRAME_PC_OFFSET 96 #define SIG_FRAME_LR_OFFSET 108 #define SIG_FRAME_FP_OFFSET 284 /* To be used by skip_prologue. */ struct rs6000_framedata { int offset; /* total size of frame --- the distance by which we decrement sp to allocate the frame */ int saved_gpr; /* smallest # of saved gpr */ int saved_fpr; /* smallest # of saved fpr */ int alloca_reg; /* alloca register number (frame ptr) */ char frameless; /* true if frameless functions. */ char nosavedpc; /* true if pc not saved. */ int gpr_offset; /* offset of saved gprs from prev sp */ int fpr_offset; /* offset of saved fprs from prev sp */ int lr_offset; /* offset of saved lr */ int cr_offset; /* offset of saved cr */ }; /* Description of a single register. */ struct reg { char *name; /* name of register */ unsigned char sz32; /* size on 32-bit arch, 0 if nonextant */ unsigned char sz64; /* size on 64-bit arch, 0 if nonextant */ unsigned char fpr; /* whether register is floating-point */ }; /* Private data that this module attaches to struct gdbarch. */ struct gdbarch_tdep { int wordsize; /* size in bytes of fixed-point word */ int osabi; /* OS / ABI from ELF header */ int *regoff; /* byte offsets in register arrays */ const struct reg *regs; /* from current variant */ }; /* Return the current architecture's gdbarch_tdep structure. */ #define TDEP gdbarch_tdep (current_gdbarch) /* Breakpoint shadows for the single step instructions will be kept here. */ static struct sstep_breaks { /* Address, or 0 if this is not in use. */ CORE_ADDR address; /* Shadow contents. */ char data[4]; } stepBreaks[2]; /* Hook for determining the TOC address when calling functions in the inferior under AIX. The initialization code in rs6000-nat.c sets this hook to point to find_toc_address. */ CORE_ADDR (*rs6000_find_toc_address_hook) (CORE_ADDR) = NULL; /* Hook to set the current architecture when starting a child process. rs6000-nat.c sets this. */ void (*rs6000_set_host_arch_hook) (int) = NULL; /* Static function prototypes */ static CORE_ADDR branch_dest (int opcode, int instr, CORE_ADDR pc, CORE_ADDR safety); static CORE_ADDR skip_prologue (CORE_ADDR, CORE_ADDR, struct rs6000_framedata *); static void frame_get_saved_regs (struct frame_info * fi, struct rs6000_framedata * fdatap); static CORE_ADDR frame_initial_stack_address (struct frame_info *); /* Read a LEN-byte address from debugged memory address MEMADDR. */ static CORE_ADDR read_memory_addr (CORE_ADDR memaddr, int len) { return read_memory_unsigned_integer (memaddr, len); } static CORE_ADDR rs6000_skip_prologue (CORE_ADDR pc) { struct rs6000_framedata frame; pc = skip_prologue (pc, 0, &frame); return pc; } /* Fill in fi->saved_regs */ struct frame_extra_info { /* Functions calling alloca() change the value of the stack pointer. We need to use initial stack pointer (which is saved in r31 by gcc) in such cases. If a compiler emits traceback table, then we should use the alloca register specified in traceback table. FIXME. */ CORE_ADDR initial_sp; /* initial stack pointer. */ }; void rs6000_init_extra_frame_info (int fromleaf, struct frame_info *fi) { fi->extra_info = (struct frame_extra_info *) frame_obstack_alloc (sizeof (struct frame_extra_info)); fi->extra_info->initial_sp = 0; if (fi->next != (CORE_ADDR) 0 && fi->pc < TEXT_SEGMENT_BASE) /* We're in get_prev_frame */ /* and this is a special signal frame. */ /* (fi->pc will be some low address in the kernel, */ /* to which the signal handler returns). */ fi->signal_handler_caller = 1; } /* Put here the code to store, into a struct frame_saved_regs, the addresses of the saved registers of frame described by FRAME_INFO. This includes special registers such as pc and fp saved in special ways in the stack frame. sp is even more special: the address we return for it IS the sp for the next frame. */ /* In this implementation for RS/6000, we do *not* save sp. I am not sure if it will be needed. The following function takes care of gpr's and fpr's only. */ void rs6000_frame_init_saved_regs (struct frame_info *fi) { frame_get_saved_regs (fi, NULL); } static CORE_ADDR rs6000_frame_args_address (struct frame_info *fi) { if (fi->extra_info->initial_sp != 0) return fi->extra_info->initial_sp; else return frame_initial_stack_address (fi); } /* Immediately after a function call, return the saved pc. Can't go through the frames for this because on some machines the new frame is not set up until the new function executes some instructions. */ static CORE_ADDR rs6000_saved_pc_after_call (struct frame_info *fi) { return read_register (PPC_LR_REGNUM); } /* Calculate the destination of a branch/jump. Return -1 if not a branch. */ static CORE_ADDR branch_dest (int opcode, int instr, CORE_ADDR pc, CORE_ADDR safety) { CORE_ADDR dest; int immediate; int absolute; int ext_op; absolute = (int) ((instr >> 1) & 1); switch (opcode) { case 18: immediate = ((instr & ~3) << 6) >> 6; /* br unconditional */ if (absolute) dest = immediate; else dest = pc + immediate; break; case 16: immediate = ((instr & ~3) << 16) >> 16; /* br conditional */ if (absolute) dest = immediate; else dest = pc + immediate; break; case 19: ext_op = (instr >> 1) & 0x3ff; if (ext_op == 16) /* br conditional register */ { dest = read_register (PPC_LR_REGNUM) & ~3; /* If we are about to return from a signal handler, dest is something like 0x3c90. The current frame is a signal handler caller frame, upon completion of the sigreturn system call execution will return to the saved PC in the frame. */ if (dest < TEXT_SEGMENT_BASE) { struct frame_info *fi; fi = get_current_frame (); if (fi != NULL) dest = read_memory_addr (fi->frame + SIG_FRAME_PC_OFFSET, TDEP->wordsize); } } else if (ext_op == 528) /* br cond to count reg */ { dest = read_register (PPC_CTR_REGNUM) & ~3; /* If we are about to execute a system call, dest is something like 0x22fc or 0x3b00. Upon completion the system call will return to the address in the link register. */ if (dest < TEXT_SEGMENT_BASE) dest = read_register (PPC_LR_REGNUM) & ~3; } else return -1; break; default: return -1; } return (dest < TEXT_SEGMENT_BASE) ? safety : dest; } /* Sequence of bytes for breakpoint instruction. */ #define BIG_BREAKPOINT { 0x7d, 0x82, 0x10, 0x08 } #define LITTLE_BREAKPOINT { 0x08, 0x10, 0x82, 0x7d } static unsigned char * rs6000_breakpoint_from_pc (CORE_ADDR *bp_addr, int *bp_size) { static unsigned char big_breakpoint[] = BIG_BREAKPOINT; static unsigned char little_breakpoint[] = LITTLE_BREAKPOINT; *bp_size = 4; if (TARGET_BYTE_ORDER == BIG_ENDIAN) return big_breakpoint; else return little_breakpoint; } /* AIX does not support PT_STEP. Simulate it. */ void rs6000_software_single_step (unsigned int signal, int insert_breakpoints_p) { #define INSNLEN(OPCODE) 4 static char le_breakp[] = LITTLE_BREAKPOINT; static char be_breakp[] = BIG_BREAKPOINT; char *breakp = TARGET_BYTE_ORDER == BIG_ENDIAN ? be_breakp : le_breakp; int ii, insn; CORE_ADDR loc; CORE_ADDR breaks[2]; int opcode; if (insert_breakpoints_p) { loc = read_pc (); insn = read_memory_integer (loc, 4); breaks[0] = loc + INSNLEN (insn); opcode = insn >> 26; breaks[1] = branch_dest (opcode, insn, loc, breaks[0]); /* Don't put two breakpoints on the same address. */ if (breaks[1] == breaks[0]) breaks[1] = -1; stepBreaks[1].address = 0; for (ii = 0; ii < 2; ++ii) { /* ignore invalid breakpoint. */ if (breaks[ii] == -1) continue; read_memory (breaks[ii], stepBreaks[ii].data, 4); write_memory (breaks[ii], breakp, 4); stepBreaks[ii].address = breaks[ii]; } } else { /* remove step breakpoints. */ for (ii = 0; ii < 2; ++ii) if (stepBreaks[ii].address != 0) write_memory (stepBreaks[ii].address, stepBreaks[ii].data, 4); } errno = 0; /* FIXME, don't ignore errors! */ /* What errors? {read,write}_memory call error(). */ } /* return pc value after skipping a function prologue and also return information about a function frame. in struct rs6000_framedata fdata: - frameless is TRUE, if function does not have a frame. - nosavedpc is TRUE, if function does not save %pc value in its frame. - offset is the initial size of this stack frame --- the amount by which we decrement the sp to allocate the frame. - saved_gpr is the number of the first saved gpr. - saved_fpr is the number of the first saved fpr. - alloca_reg is the number of the register used for alloca() handling. Otherwise -1. - gpr_offset is the offset of the first saved gpr from the previous frame. - fpr_offset is the offset of the first saved fpr from the previous frame. - lr_offset is the offset of the saved lr - cr_offset is the offset of the saved cr */ #define SIGNED_SHORT(x) \ ((sizeof (short) == 2) \ ? ((int)(short)(x)) \ : ((int)((((x) & 0xffff) ^ 0x8000) - 0x8000))) #define GET_SRC_REG(x) (((x) >> 21) & 0x1f) /* Limit the number of skipped non-prologue instructions, as the examining of the prologue is expensive. */ static int max_skip_non_prologue_insns = 10; /* Given PC representing the starting address of a function, and LIM_PC which is the (sloppy) limit to which to scan when looking for a prologue, attempt to further refine this limit by using the line data in the symbol table. If successful, a better guess on where the prologue ends is returned, otherwise the previous value of lim_pc is returned. */ static CORE_ADDR refine_prologue_limit (CORE_ADDR pc, CORE_ADDR lim_pc) { struct symtab_and_line prologue_sal; prologue_sal = find_pc_line (pc, 0); if (prologue_sal.line != 0) { int i; CORE_ADDR addr = prologue_sal.end; /* Handle the case in which compiler's optimizer/scheduler has moved instructions into the prologue. We scan ahead in the function looking for address ranges whose corresponding line number is less than or equal to the first one that we found for the function. (It can be less than when the scheduler puts a body instruction before the first prologue instruction.) */ for (i = 2 * max_skip_non_prologue_insns; i > 0 && (lim_pc == 0 || addr < lim_pc); i--) { struct symtab_and_line sal; sal = find_pc_line (addr, 0); if (sal.line == 0) break; if (sal.line <= prologue_sal.line && sal.symtab == prologue_sal.symtab) { prologue_sal = sal; } addr = sal.end; } if (lim_pc == 0 || prologue_sal.end < lim_pc) lim_pc = prologue_sal.end; } return lim_pc; } static CORE_ADDR skip_prologue (CORE_ADDR pc, CORE_ADDR lim_pc, struct rs6000_framedata *fdata) { CORE_ADDR orig_pc = pc; CORE_ADDR last_prologue_pc = pc; char buf[4]; unsigned long op; long offset = 0; int lr_reg = -1; int cr_reg = -1; int reg; int framep = 0; int minimal_toc_loaded = 0; int prev_insn_was_prologue_insn = 1; int num_skip_non_prologue_insns = 0; /* Attempt to find the end of the prologue when no limit is specified. Note that refine_prologue_limit() has been written so that it may be used to "refine" the limits of non-zero PC values too, but this is only safe if we 1) trust the line information provided by the compiler and 2) iterate enough to actually find the end of the prologue. It may become a good idea at some point (for both performance and accuracy) to unconditionally call refine_prologue_limit(). But, until we can make a clear determination that this is beneficial, we'll play it safe and only use it to obtain a limit when none has been specified. */ if (lim_pc == 0) lim_pc = refine_prologue_limit (pc, lim_pc); memset (fdata, 0, sizeof (struct rs6000_framedata)); fdata->saved_gpr = -1; fdata->saved_fpr = -1; fdata->alloca_reg = -1; fdata->frameless = 1; fdata->nosavedpc = 1; for (;; pc += 4) { /* Sometimes it isn't clear if an instruction is a prologue instruction or not. When we encounter one of these ambiguous cases, we'll set prev_insn_was_prologue_insn to 0 (false). Otherwise, we'll assume that it really is a prologue instruction. */ if (prev_insn_was_prologue_insn) last_prologue_pc = pc; /* Stop scanning if we've hit the limit. */ if (lim_pc != 0 && pc >= lim_pc) break; prev_insn_was_prologue_insn = 1; /* Fetch the instruction and convert it to an integer. */ if (target_read_memory (pc, buf, 4)) break; op = extract_signed_integer (buf, 4); if ((op & 0xfc1fffff) == 0x7c0802a6) { /* mflr Rx */ lr_reg = (op & 0x03e00000) | 0x90010000; continue; } else if ((op & 0xfc1fffff) == 0x7c000026) { /* mfcr Rx */ cr_reg = (op & 0x03e00000) | 0x90010000; continue; } else if ((op & 0xfc1f0000) == 0xd8010000) { /* stfd Rx,NUM(r1) */ reg = GET_SRC_REG (op); if (fdata->saved_fpr == -1 || fdata->saved_fpr > reg) { fdata->saved_fpr = reg; fdata->fpr_offset = SIGNED_SHORT (op) + offset; } continue; } else if (((op & 0xfc1f0000) == 0xbc010000) || /* stm Rx, NUM(r1) */ (((op & 0xfc1f0000) == 0x90010000 || /* st rx,NUM(r1) */ (op & 0xfc1f0003) == 0xf8010000) && /* std rx,NUM(r1) */ (op & 0x03e00000) >= 0x01a00000)) /* rx >= r13 */ { reg = GET_SRC_REG (op); if (fdata->saved_gpr == -1 || fdata->saved_gpr > reg) { fdata->saved_gpr = reg; if ((op & 0xfc1f0003) == 0xf8010000) op = (op >> 1) << 1; fdata->gpr_offset = SIGNED_SHORT (op) + offset; } continue; } else if ((op & 0xffff0000) == 0x60000000) { /* nop */ /* Allow nops in the prologue, but do not consider them to be part of the prologue unless followed by other prologue instructions. */ prev_insn_was_prologue_insn = 0; continue; } else if ((op & 0xffff0000) == 0x3c000000) { /* addis 0,0,NUM, used for >= 32k frames */ fdata->offset = (op & 0x0000ffff) << 16; fdata->frameless = 0; continue; } else if ((op & 0xffff0000) == 0x60000000) { /* ori 0,0,NUM, 2nd ha lf of >= 32k frames */ fdata->offset |= (op & 0x0000ffff); fdata->frameless = 0; continue; } else if (lr_reg != -1 && (op & 0xffff0000) == lr_reg) { /* st Rx,NUM(r1) where Rx == lr */ fdata->lr_offset = SIGNED_SHORT (op) + offset; fdata->nosavedpc = 0; lr_reg = 0; continue; } else if (cr_reg != -1 && (op & 0xffff0000) == cr_reg) { /* st Rx,NUM(r1) where Rx == cr */ fdata->cr_offset = SIGNED_SHORT (op) + offset; cr_reg = 0; continue; } else if (op == 0x48000005) { /* bl .+4 used in -mrelocatable */ continue; } else if (op == 0x48000004) { /* b .+4 (xlc) */ break; } else if (((op & 0xffff0000) == 0x801e0000 || /* lwz 0,NUM(r30), used in V.4 -mrelocatable */ op == 0x7fc0f214) && /* add r30,r0,r30, used in V.4 -mrelocatable */ lr_reg == 0x901e0000) { continue; } else if ((op & 0xffff0000) == 0x3fc00000 || /* addis 30,0,foo@ha, used in V.4 -mminimal-toc */ (op & 0xffff0000) == 0x3bde0000) { /* addi 30,30,foo@l */ continue; } else if ((op & 0xfc000001) == 0x48000001) { /* bl foo, to save fprs??? */ fdata->frameless = 0; /* Don't skip over the subroutine call if it is not within the first three instructions of the prologue. */ if ((pc - orig_pc) > 8) break; op = read_memory_integer (pc + 4, 4); /* At this point, make sure this is not a trampoline function (a function that simply calls another functions, and nothing else). If the next is not a nop, this branch was part of the function prologue. */ if (op == 0x4def7b82 || op == 0) /* crorc 15, 15, 15 */ break; /* don't skip over this branch */ continue; /* update stack pointer */ } else if ((op & 0xffff0000) == 0x94210000 || /* stu r1,NUM(r1) */ (op & 0xffff0003) == 0xf8210001) /* stdu r1,NUM(r1) */ { fdata->frameless = 0; if ((op & 0xffff0003) == 0xf8210001) op = (op >> 1) << 1; fdata->offset = SIGNED_SHORT (op); offset = fdata->offset; continue; } else if (op == 0x7c21016e) { /* stwux 1,1,0 */ fdata->frameless = 0; offset = fdata->offset; continue; /* Load up minimal toc pointer */ } else if ((op >> 22) == 0x20f && !minimal_toc_loaded) { /* l r31,... or l r30,... */ minimal_toc_loaded = 1; continue; /* move parameters from argument registers to local variable registers */ } else if ((op & 0xfc0007fe) == 0x7c000378 && /* mr(.) Rx,Ry */ (((op >> 21) & 31) >= 3) && /* R3 >= Ry >= R10 */ (((op >> 21) & 31) <= 10) && (((op >> 16) & 31) >= fdata->saved_gpr)) /* Rx: local var reg */ { continue; /* store parameters in stack */ } else if ((op & 0xfc1f0000) == 0x90010000 || /* st rx,NUM(r1) */ (op & 0xfc1f0003) == 0xf8010000 || /* std rx,NUM(r1) */ (op & 0xfc1f0000) == 0xd8010000 || /* stfd Rx,NUM(r1) */ (op & 0xfc1f0000) == 0xfc010000) /* frsp, fp?,NUM(r1) */ { continue; /* store parameters in stack via frame pointer */ } else if (framep && ((op & 0xfc1f0000) == 0x901f0000 || /* st rx,NUM(r1) */ (op & 0xfc1f0000) == 0xd81f0000 || /* stfd Rx,NUM(r1) */ (op & 0xfc1f0000) == 0xfc1f0000)) { /* frsp, fp?,NUM(r1) */ continue; /* Set up frame pointer */ } else if (op == 0x603f0000 /* oril r31, r1, 0x0 */ || op == 0x7c3f0b78) { /* mr r31, r1 */ fdata->frameless = 0; framep = 1; fdata->alloca_reg = 31; continue; /* Another way to set up the frame pointer. */ } else if ((op & 0xfc1fffff) == 0x38010000) { /* addi rX, r1, 0x0 */ fdata->frameless = 0; framep = 1; fdata->alloca_reg = (op & ~0x38010000) >> 21; continue; } else { /* Not a recognized prologue instruction. Handle optimizer code motions into the prologue by continuing the search if we have no valid frame yet or if the return address is not yet saved in the frame. */ if (fdata->frameless == 0 && (lr_reg == -1 || fdata->nosavedpc == 0)) break; if (op == 0x4e800020 /* blr */ || op == 0x4e800420) /* bctr */ /* Do not scan past epilogue in frameless functions or trampolines. */ break; if ((op & 0xf4000000) == 0x40000000) /* bxx */ /* Never skip branches. */ break; if (num_skip_non_prologue_insns++ > max_skip_non_prologue_insns) /* Do not scan too many insns, scanning insns is expensive with remote targets. */ break; /* Continue scanning. */ prev_insn_was_prologue_insn = 0; continue; } } #if 0 /* I have problems with skipping over __main() that I need to address * sometime. Previously, I used to use misc_function_vector which * didn't work as well as I wanted to be. -MGO */ /* If the first thing after skipping a prolog is a branch to a function, this might be a call to an initializer in main(), introduced by gcc2. We'd like to skip over it as well. Fortunately, xlc does some extra work before calling a function right after a prologue, thus we can single out such gcc2 behaviour. */ if ((op & 0xfc000001) == 0x48000001) { /* bl foo, an initializer function? */ op = read_memory_integer (pc + 4, 4); if (op == 0x4def7b82) { /* cror 0xf, 0xf, 0xf (nop) */ /* check and see if we are in main. If so, skip over this initializer function as well. */ tmp = find_pc_misc_function (pc); if (tmp >= 0 && STREQ (misc_function_vector[tmp].name, "main")) return pc + 8; } } #endif /* 0 */ fdata->offset = -fdata->offset; return last_prologue_pc; } /************************************************************************* Support for creating pushing a dummy frame into the stack, and popping frames, etc. *************************************************************************/ /* Pop the innermost frame, go back to the caller. */ static void rs6000_pop_frame (void) { CORE_ADDR pc, lr, sp, prev_sp, addr; /* %pc, %lr, %sp */ struct rs6000_framedata fdata; struct frame_info *frame = get_current_frame (); int ii, wordsize; pc = read_pc (); sp = FRAME_FP (frame); if (PC_IN_CALL_DUMMY (frame->pc, frame->frame, frame->frame)) { generic_pop_dummy_frame (); flush_cached_frames (); return; } /* Make sure that all registers are valid. */ read_register_bytes (0, NULL, REGISTER_BYTES); /* figure out previous %pc value. If the function is frameless, it is still in the link register, otherwise walk the frames and retrieve the saved %pc value in the previous frame. */ addr = get_pc_function_start (frame->pc); (void) skip_prologue (addr, frame->pc, &fdata); wordsize = TDEP->wordsize; if (fdata.frameless) prev_sp = sp; else prev_sp = read_memory_addr (sp, wordsize); if (fdata.lr_offset == 0) lr = read_register (PPC_LR_REGNUM); else lr = read_memory_addr (prev_sp + fdata.lr_offset, wordsize); /* reset %pc value. */ write_register (PC_REGNUM, lr); /* reset register values if any was saved earlier. */ if (fdata.saved_gpr != -1) { addr = prev_sp + fdata.gpr_offset; for (ii = fdata.saved_gpr; ii <= 31; ++ii) { read_memory (addr, ®isters[REGISTER_BYTE (ii)], wordsize); addr += wordsize; } } if (fdata.saved_fpr != -1) { addr = prev_sp + fdata.fpr_offset; for (ii = fdata.saved_fpr; ii <= 31; ++ii) { read_memory (addr, ®isters[REGISTER_BYTE (ii + FP0_REGNUM)], 8); addr += 8; } } write_register (SP_REGNUM, prev_sp); target_store_registers (-1); flush_cached_frames (); } /* Fixup the call sequence of a dummy function, with the real function address. Its arguments will be passed by gdb. */ static void rs6000_fix_call_dummy (char *dummyname, CORE_ADDR pc, CORE_ADDR fun, int nargs, value_ptr *args, struct type *type, int gcc_p) { #define TOC_ADDR_OFFSET 20 #define TARGET_ADDR_OFFSET 28 int ii; CORE_ADDR target_addr; if (rs6000_find_toc_address_hook != NULL) { CORE_ADDR tocvalue = (*rs6000_find_toc_address_hook) (fun); write_register (PPC_TOC_REGNUM, tocvalue); } } /* Pass the arguments in either registers, or in the stack. In RS/6000, the first eight words of the argument list (that might be less than eight parameters if some parameters occupy more than one word) are passed in r3..r10 registers. float and double parameters are passed in fpr's, in addition to that. Rest of the parameters if any are passed in user stack. There might be cases in which half of the parameter is copied into registers, the other half is pushed into stack. Stack must be aligned on 64-bit boundaries when synthesizing function calls. If the function is returning a structure, then the return address is passed in r3, then the first 7 words of the parameters can be passed in registers, starting from r4. */ static CORE_ADDR rs6000_push_arguments (int nargs, value_ptr *args, CORE_ADDR sp, int struct_return, CORE_ADDR struct_addr) { int ii; int len = 0; int argno; /* current argument number */ int argbytes; /* current argument byte */ char tmp_buffer[50]; int f_argno = 0; /* current floating point argno */ int wordsize = TDEP->wordsize; value_ptr arg = 0; struct type *type; CORE_ADDR saved_sp; /* The first eight words of ther arguments are passed in registers. Copy them appropriately. If the function is returning a `struct', then the first word (which will be passed in r3) is used for struct return address. In that case we should advance one word and start from r4 register to copy parameters. */ ii = struct_return ? 1 : 0; /* effectively indirect call... gcc does... return_val example( float, int); eabi: float in fp0, int in r3 offset of stack on overflow 8/16 for varargs, must go by type. power open: float in r3&r4, int in r5 offset of stack on overflow different both: return in r3 or f0. If no float, must study how gcc emulates floats; pay attention to arg promotion. User may have to cast\args to handle promotion correctly since gdb won't know if prototype supplied or not. */ for (argno = 0, argbytes = 0; argno < nargs && ii < 8; ++ii) { int reg_size = REGISTER_RAW_SIZE (ii + 3); arg = args[argno]; type = check_typedef (VALUE_TYPE (arg)); len = TYPE_LENGTH (type); if (TYPE_CODE (type) == TYPE_CODE_FLT) { /* floating point arguments are passed in fpr's, as well as gpr's. There are 13 fpr's reserved for passing parameters. At this point there is no way we would run out of them. */ if (len > 8) printf_unfiltered ( "Fatal Error: a floating point parameter #%d with a size > 8 is found!\n", argno); memcpy (®isters[REGISTER_BYTE (FP0_REGNUM + 1 + f_argno)], VALUE_CONTENTS (arg), len); ++f_argno; } if (len > reg_size) { /* Argument takes more than one register. */ while (argbytes < len) { memset (®isters[REGISTER_BYTE (ii + 3)], 0, reg_size); memcpy (®isters[REGISTER_BYTE (ii + 3)], ((char *) VALUE_CONTENTS (arg)) + argbytes, (len - argbytes) > reg_size ? reg_size : len - argbytes); ++ii, argbytes += reg_size; if (ii >= 8) goto ran_out_of_registers_for_arguments; } argbytes = 0; --ii; } else { /* Argument can fit in one register. No problem. */ int adj = TARGET_BYTE_ORDER == BIG_ENDIAN ? reg_size - len : 0; memset (®isters[REGISTER_BYTE (ii + 3)], 0, reg_size); memcpy ((char *)®isters[REGISTER_BYTE (ii + 3)] + adj, VALUE_CONTENTS (arg), len); } ++argno; } ran_out_of_registers_for_arguments: saved_sp = read_sp (); #ifndef ELF_OBJECT_FORMAT /* location for 8 parameters are always reserved. */ sp -= wordsize * 8; /* another six words for back chain, TOC register, link register, etc. */ sp -= wordsize * 6; /* stack pointer must be quadword aligned */ sp &= -16; #endif /* if there are more arguments, allocate space for them in the stack, then push them starting from the ninth one. */ if ((argno < nargs) || argbytes) { int space = 0, jj; if (argbytes) { space += ((len - argbytes + 3) & -4); jj = argno + 1; } else jj = argno; for (; jj < nargs; ++jj) { value_ptr val = args[jj]; space += ((TYPE_LENGTH (VALUE_TYPE (val))) + 3) & -4; } /* add location required for the rest of the parameters */ space = (space + 15) & -16; sp -= space; /* This is another instance we need to be concerned about securing our stack space. If we write anything underneath %sp (r1), we might conflict with the kernel who thinks he is free to use this area. So, update %sp first before doing anything else. */ write_register (SP_REGNUM, sp); /* if the last argument copied into the registers didn't fit there completely, push the rest of it into stack. */ if (argbytes) { write_memory (sp + 24 + (ii * 4), ((char *) VALUE_CONTENTS (arg)) + argbytes, len - argbytes); ++argno; ii += ((len - argbytes + 3) & -4) / 4; } /* push the rest of the arguments into stack. */ for (; argno < nargs; ++argno) { arg = args[argno]; type = check_typedef (VALUE_TYPE (arg)); len = TYPE_LENGTH (type); /* float types should be passed in fpr's, as well as in the stack. */ if (TYPE_CODE (type) == TYPE_CODE_FLT && f_argno < 13) { if (len > 8) printf_unfiltered ( "Fatal Error: a floating point parameter #%d with a size > 8 is found!\n", argno); memcpy (®isters[REGISTER_BYTE (FP0_REGNUM + 1 + f_argno)], VALUE_CONTENTS (arg), len); ++f_argno; } write_memory (sp + 24 + (ii * 4), (char *) VALUE_CONTENTS (arg), len); ii += ((len + 3) & -4) / 4; } } else /* Secure stack areas first, before doing anything else. */ write_register (SP_REGNUM, sp); /* set back chain properly */ store_address (tmp_buffer, 4, saved_sp); write_memory (sp, tmp_buffer, 4); target_store_registers (-1); return sp; } /* Function: ppc_push_return_address (pc, sp) Set up the return address for the inferior function call. */ static CORE_ADDR ppc_push_return_address (CORE_ADDR pc, CORE_ADDR sp) { write_register (PPC_LR_REGNUM, CALL_DUMMY_ADDRESS ()); return sp; } /* Extract a function return value of type TYPE from raw register array REGBUF, and copy that return value into VALBUF in virtual format. */ static void rs6000_extract_return_value (struct type *valtype, char *regbuf, char *valbuf) { int offset = 0; if (TYPE_CODE (valtype) == TYPE_CODE_FLT) { double dd; float ff; /* floats and doubles are returned in fpr1. fpr's have a size of 8 bytes. We need to truncate the return value into float size (4 byte) if necessary. */ if (TYPE_LENGTH (valtype) > 4) /* this is a double */ memcpy (valbuf, ®buf[REGISTER_BYTE (FP0_REGNUM + 1)], TYPE_LENGTH (valtype)); else { /* float */ memcpy (&dd, ®buf[REGISTER_BYTE (FP0_REGNUM + 1)], 8); ff = (float) dd; memcpy (valbuf, &ff, sizeof (float)); } } else { /* return value is copied starting from r3. */ if (TARGET_BYTE_ORDER == BIG_ENDIAN && TYPE_LENGTH (valtype) < REGISTER_RAW_SIZE (3)) offset = REGISTER_RAW_SIZE (3) - TYPE_LENGTH (valtype); memcpy (valbuf, regbuf + REGISTER_BYTE (3) + offset, TYPE_LENGTH (valtype)); } } /* Keep structure return address in this variable. FIXME: This is a horrid kludge which should not be allowed to continue living. This only allows a single nested call to a structure-returning function. Come on, guys! -- gnu@cygnus.com, Aug 92 */ static CORE_ADDR rs6000_struct_return_address; /* Indirect function calls use a piece of trampoline code to do context switching, i.e. to set the new TOC table. Skip such code if we are on its first instruction (as when we have single-stepped to here). Also skip shared library trampoline code (which is different from indirect function call trampolines). Result is desired PC to step until, or NULL if we are not in trampoline code. */ CORE_ADDR rs6000_skip_trampoline_code (CORE_ADDR pc) { register unsigned int ii, op; CORE_ADDR solib_target_pc; static unsigned trampoline_code[] = { 0x800b0000, /* l r0,0x0(r11) */ 0x90410014, /* st r2,0x14(r1) */ 0x7c0903a6, /* mtctr r0 */ 0x804b0004, /* l r2,0x4(r11) */ 0x816b0008, /* l r11,0x8(r11) */ 0x4e800420, /* bctr */ 0x4e800020, /* br */ 0 }; /* If pc is in a shared library trampoline, return its target. */ solib_target_pc = find_solib_trampoline_target (pc); if (solib_target_pc) return solib_target_pc; for (ii = 0; trampoline_code[ii]; ++ii) { op = read_memory_integer (pc + (ii * 4), 4); if (op != trampoline_code[ii]) return 0; } ii = read_register (11); /* r11 holds destination addr */ pc = read_memory_addr (ii, TDEP->wordsize); /* (r11) value */ return pc; } /* Determines whether the function FI has a frame on the stack or not. */ int rs6000_frameless_function_invocation (struct frame_info *fi) { CORE_ADDR func_start; struct rs6000_framedata fdata; /* Don't even think about framelessness except on the innermost frame or if the function was interrupted by a signal. */ if (fi->next != NULL && !fi->next->signal_handler_caller) return 0; func_start = get_pc_function_start (fi->pc); /* If we failed to find the start of the function, it is a mistake to inspect the instructions. */ if (!func_start) { /* A frame with a zero PC is usually created by dereferencing a NULL function pointer, normally causing an immediate core dump of the inferior. Mark function as frameless, as the inferior has no chance of setting up a stack frame. */ if (fi->pc == 0) return 1; else return 0; } (void) skip_prologue (func_start, fi->pc, &fdata); return fdata.frameless; } /* Return the PC saved in a frame */ CORE_ADDR rs6000_frame_saved_pc (struct frame_info *fi) { CORE_ADDR func_start; struct rs6000_framedata fdata; int wordsize = TDEP->wordsize; if (fi->signal_handler_caller) return read_memory_addr (fi->frame + SIG_FRAME_PC_OFFSET, wordsize); if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame)) return generic_read_register_dummy (fi->pc, fi->frame, PC_REGNUM); func_start = get_pc_function_start (fi->pc); /* If we failed to find the start of the function, it is a mistake to inspect the instructions. */ if (!func_start) return 0; (void) skip_prologue (func_start, fi->pc, &fdata); if (fdata.lr_offset == 0 && fi->next != NULL) { if (fi->next->signal_handler_caller) return read_memory_addr (fi->next->frame + SIG_FRAME_LR_OFFSET, wordsize); else return read_memory_addr (FRAME_CHAIN (fi) + DEFAULT_LR_SAVE, wordsize); } if (fdata.lr_offset == 0) return read_register (PPC_LR_REGNUM); return read_memory_addr (FRAME_CHAIN (fi) + fdata.lr_offset, wordsize); } /* If saved registers of frame FI are not known yet, read and cache them. &FDATAP contains rs6000_framedata; TDATAP can be NULL, in which case the framedata are read. */ static void frame_get_saved_regs (struct frame_info *fi, struct rs6000_framedata *fdatap) { CORE_ADDR frame_addr; struct rs6000_framedata work_fdata; int wordsize = TDEP->wordsize; if (fi->saved_regs) return; if (fdatap == NULL) { fdatap = &work_fdata; (void) skip_prologue (get_pc_function_start (fi->pc), fi->pc, fdatap); } frame_saved_regs_zalloc (fi); /* If there were any saved registers, figure out parent's stack pointer. */ /* The following is true only if the frame doesn't have a call to alloca(), FIXME. */ if (fdatap->saved_fpr == 0 && fdatap->saved_gpr == 0 && fdatap->lr_offset == 0 && fdatap->cr_offset == 0) frame_addr = 0; else if (fi->prev && fi->prev->frame) frame_addr = fi->prev->frame; else frame_addr = read_memory_addr (fi->frame, wordsize); /* if != -1, fdatap->saved_fpr is the smallest number of saved_fpr. All fpr's from saved_fpr to fp31 are saved. */ if (fdatap->saved_fpr >= 0) { int i; CORE_ADDR fpr_addr = frame_addr + fdatap->fpr_offset; for (i = fdatap->saved_fpr; i < 32; i++) { fi->saved_regs[FP0_REGNUM + i] = fpr_addr; fpr_addr += 8; } } /* if != -1, fdatap->saved_gpr is the smallest number of saved_gpr. All gpr's from saved_gpr to gpr31 are saved. */ if (fdatap->saved_gpr >= 0) { int i; CORE_ADDR gpr_addr = frame_addr + fdatap->gpr_offset; for (i = fdatap->saved_gpr; i < 32; i++) { fi->saved_regs[i] = gpr_addr; gpr_addr += wordsize; } } /* If != 0, fdatap->cr_offset is the offset from the frame that holds the CR. */ if (fdatap->cr_offset != 0) fi->saved_regs[PPC_CR_REGNUM] = frame_addr + fdatap->cr_offset; /* If != 0, fdatap->lr_offset is the offset from the frame that holds the LR. */ if (fdatap->lr_offset != 0) fi->saved_regs[PPC_LR_REGNUM] = frame_addr + fdatap->lr_offset; } /* Return the address of a frame. This is the inital %sp value when the frame was first allocated. For functions calling alloca(), it might be saved in an alloca register. */ static CORE_ADDR frame_initial_stack_address (struct frame_info *fi) { CORE_ADDR tmpaddr; struct rs6000_framedata fdata; struct frame_info *callee_fi; /* if the initial stack pointer (frame address) of this frame is known, just return it. */ if (fi->extra_info->initial_sp) return fi->extra_info->initial_sp; /* find out if this function is using an alloca register.. */ (void) skip_prologue (get_pc_function_start (fi->pc), fi->pc, &fdata); /* if saved registers of this frame are not known yet, read and cache them. */ if (!fi->saved_regs) frame_get_saved_regs (fi, &fdata); /* If no alloca register used, then fi->frame is the value of the %sp for this frame, and it is good enough. */ if (fdata.alloca_reg < 0) { fi->extra_info->initial_sp = fi->frame; return fi->extra_info->initial_sp; } /* This function has an alloca register. If this is the top-most frame (with the lowest address), the value in alloca register is good. */ if (!fi->next) return fi->extra_info->initial_sp = read_register (fdata.alloca_reg); /* Otherwise, this is a caller frame. Callee has usually already saved registers, but there are exceptions (such as when the callee has no parameters). Find the address in which caller's alloca register is saved. */ for (callee_fi = fi->next; callee_fi; callee_fi = callee_fi->next) { if (!callee_fi->saved_regs) frame_get_saved_regs (callee_fi, NULL); /* this is the address in which alloca register is saved. */ tmpaddr = callee_fi->saved_regs[fdata.alloca_reg]; if (tmpaddr) { fi->extra_info->initial_sp = read_memory_addr (tmpaddr, TDEP->wordsize); return fi->extra_info->initial_sp; } /* Go look into deeper levels of the frame chain to see if any one of the callees has saved alloca register. */ } /* If alloca register was not saved, by the callee (or any of its callees) then the value in the register is still good. */ fi->extra_info->initial_sp = read_register (fdata.alloca_reg); return fi->extra_info->initial_sp; } /* Describe the pointer in each stack frame to the previous stack frame (its caller). */ /* FRAME_CHAIN takes a frame's nominal address and produces the frame's chain-pointer. */ /* In the case of the RS/6000, the frame's nominal address is the address of a 4-byte word containing the calling frame's address. */ CORE_ADDR rs6000_frame_chain (struct frame_info *thisframe) { CORE_ADDR fp, fpp, lr; int wordsize = TDEP->wordsize; if (PC_IN_CALL_DUMMY (thisframe->pc, thisframe->frame, thisframe->frame)) return thisframe->frame; /* dummy frame same as caller's frame */ if (inside_entry_file (thisframe->pc) || thisframe->pc == entry_point_address ()) return 0; if (thisframe->signal_handler_caller) fp = read_memory_addr (thisframe->frame + SIG_FRAME_FP_OFFSET, wordsize); else if (thisframe->next != NULL && thisframe->next->signal_handler_caller && FRAMELESS_FUNCTION_INVOCATION (thisframe)) /* A frameless function interrupted by a signal did not change the frame pointer. */ fp = FRAME_FP (thisframe); else fp = read_memory_addr ((thisframe)->frame, wordsize); lr = read_register (PPC_LR_REGNUM); if (lr == entry_point_address ()) if (fp != 0 && (fpp = read_memory_addr (fp, wordsize)) != 0) if (PC_IN_CALL_DUMMY (lr, fpp, fpp)) return fpp; return fp; } /* Return the size of register REG when words are WORDSIZE bytes long. If REG isn't available with that word size, return 0. */ static int regsize (const struct reg *reg, int wordsize) { return wordsize == 8 ? reg->sz64 : reg->sz32; } /* Return the name of register number N, or null if no such register exists in the current architecture. */ static char * rs6000_register_name (int n) { struct gdbarch_tdep *tdep = TDEP; const struct reg *reg = tdep->regs + n; if (!regsize (reg, tdep->wordsize)) return NULL; return reg->name; } /* Index within `registers' of the first byte of the space for register N. */ static int rs6000_register_byte (int n) { return TDEP->regoff[n]; } /* Return the number of bytes of storage in the actual machine representation for register N if that register is available, else return 0. */ static int rs6000_register_raw_size (int n) { struct gdbarch_tdep *tdep = TDEP; const struct reg *reg = tdep->regs + n; return regsize (reg, tdep->wordsize); } /* Number of bytes of storage in the program's representation for register N. */ static int rs6000_register_virtual_size (int n) { return TYPE_LENGTH (REGISTER_VIRTUAL_TYPE (n)); } /* Return the GDB type object for the "standard" data type of data in register N. */ static struct type * rs6000_register_virtual_type (int n) { struct gdbarch_tdep *tdep = TDEP; const struct reg *reg = tdep->regs + n; return reg->fpr ? builtin_type_double : regsize (reg, tdep->wordsize) == 8 ? builtin_type_int64 : builtin_type_int32; } /* For the PowerPC, it appears that the debug info marks float parameters as floats regardless of whether the function is prototyped, but the actual values are always passed in as doubles. Tell gdb to always assume that floats are passed as doubles and then converted in the callee. */ static int rs6000_coerce_float_to_double (struct type *formal, struct type *actual) { return 1; } /* Return whether register N requires conversion when moving from raw format to virtual format. The register format for RS/6000 floating point registers is always double, we need a conversion if the memory format is float. */ static int rs6000_register_convertible (int n) { const struct reg *reg = TDEP->regs + n; return reg->fpr; } /* Convert data from raw format for register N in buffer FROM to virtual format with type TYPE in buffer TO. */ static void rs6000_register_convert_to_virtual (int n, struct type *type, char *from, char *to) { if (TYPE_LENGTH (type) != REGISTER_RAW_SIZE (n)) { double val = extract_floating (from, REGISTER_RAW_SIZE (n)); store_floating (to, TYPE_LENGTH (type), val); } else memcpy (to, from, REGISTER_RAW_SIZE (n)); } /* Convert data from virtual format with type TYPE in buffer FROM to raw format for register N in buffer TO. */ static void rs6000_register_convert_to_raw (struct type *type, int n, char *from, char *to) { if (TYPE_LENGTH (type) != REGISTER_RAW_SIZE (n)) { double val = extract_floating (from, TYPE_LENGTH (type)); store_floating (to, REGISTER_RAW_SIZE (n), val); } else memcpy (to, from, REGISTER_RAW_SIZE (n)); } /* Store the address of the place in which to copy the structure the subroutine will return. This is called from call_function. In RS/6000, struct return addresses are passed as an extra parameter in r3. In function return, callee is not responsible of returning this address back. Since gdb needs to find it, we will store in a designated variable `rs6000_struct_return_address'. */ static void rs6000_store_struct_return (CORE_ADDR addr, CORE_ADDR sp) { write_register (3, addr); rs6000_struct_return_address = addr; } /* Write into appropriate registers a function return value of type TYPE, given in virtual format. */ static void rs6000_store_return_value (struct type *type, char *valbuf) { if (TYPE_CODE (type) == TYPE_CODE_FLT) /* Floating point values are returned starting from FPR1 and up. Say a double_double_double type could be returned in FPR1/FPR2/FPR3 triple. */ write_register_bytes (REGISTER_BYTE (FP0_REGNUM + 1), valbuf, TYPE_LENGTH (type)); else /* Everything else is returned in GPR3 and up. */ write_register_bytes (REGISTER_BYTE (PPC_GP0_REGNUM + 3), valbuf, TYPE_LENGTH (type)); } /* Extract from an array REGBUF containing the (raw) register state the address in which a function should return its structure value, as a CORE_ADDR (or an expression that can be used as one). */ static CORE_ADDR rs6000_extract_struct_value_address (char *regbuf) { return rs6000_struct_return_address; } /* Return whether PC is in a dummy function call. FIXME: This just checks for the end of the stack, which is broken for things like stepping through gcc nested function stubs. */ static int rs6000_pc_in_call_dummy (CORE_ADDR pc, CORE_ADDR sp, CORE_ADDR fp) { return sp < pc && pc < fp; } /* Hook called when a new child process is started. */ void rs6000_create_inferior (int pid) { if (rs6000_set_host_arch_hook) rs6000_set_host_arch_hook (pid); } /* Support for CONVERT_FROM_FUNC_PTR_ADDR(ADDR). Usually a function pointer's representation is simply the address of the function. On the RS/6000 however, a function pointer is represented by a pointer to a TOC entry. This TOC entry contains three words, the first word is the address of the function, the second word is the TOC pointer (r2), and the third word is the static chain value. Throughout GDB it is currently assumed that a function pointer contains the address of the function, which is not easy to fix. In addition, the conversion of a function address to a function pointer would require allocation of a TOC entry in the inferior's memory space, with all its drawbacks. To be able to call C++ virtual methods in the inferior (which are called via function pointers), find_function_addr uses this function to get the function address from a function pointer. */ /* Return real function address if ADDR (a function pointer) is in the data space and is therefore a special function pointer. */ CORE_ADDR rs6000_convert_from_func_ptr_addr (CORE_ADDR addr) { struct obj_section *s; s = find_pc_section (addr); if (s && s->the_bfd_section->flags & SEC_CODE) return addr; /* ADDR is in the data space, so it's a special function pointer. */ return read_memory_addr (addr, TDEP->wordsize); } /* Handling the various POWER/PowerPC variants. */ /* The arrays here called registers_MUMBLE hold information about available registers. For each family of PPC variants, I've tried to isolate out the common registers and put them up front, so that as long as you get the general family right, GDB will correctly identify the registers common to that family. The common register sets are: For the 60x family: hid0 hid1 iabr dabr pir For the 505 and 860 family: eie eid nri For the 403 and 403GC: icdbdr esr dear evpr cdbcr tsr tcr pit tbhi tblo srr2 srr3 dbsr dbcr iac1 iac2 dac1 dac2 dccr iccr pbl1 pbu1 pbl2 pbu2 Most of these register groups aren't anything formal. I arrived at them by looking at the registers that occurred in more than one processor. */ /* Convenience macros for populating register arrays. */ /* Within another macro, convert S to a string. */ #define STR(s) #s /* Return a struct reg defining register NAME that's 32 bits on 32-bit systems and 64 bits on 64-bit systems. */ #define R(name) { STR(name), 4, 8, 0 } /* Return a struct reg defining register NAME that's 32 bits on all systems. */ #define R4(name) { STR(name), 4, 4, 0 } /* Return a struct reg defining register NAME that's 64 bits on all systems. */ #define R8(name) { STR(name), 8, 8, 0 } /* Return a struct reg defining floating-point register NAME. */ #define F(name) { STR(name), 8, 8, 1 } /* Return a struct reg defining register NAME that's 32 bits on 32-bit systems and that doesn't exist on 64-bit systems. */ #define R32(name) { STR(name), 4, 0, 0 } /* Return a struct reg defining register NAME that's 64 bits on 64-bit systems and that doesn't exist on 32-bit systems. */ #define R64(name) { STR(name), 0, 8, 0 } /* Return a struct reg placeholder for a register that doesn't exist. */ #define R0 { 0, 0, 0, 0 } /* UISA registers common across all architectures, including POWER. */ #define COMMON_UISA_REGS \ /* 0 */ R(r0), R(r1), R(r2), R(r3), R(r4), R(r5), R(r6), R(r7), \ /* 8 */ R(r8), R(r9), R(r10),R(r11),R(r12),R(r13),R(r14),R(r15), \ /* 16 */ R(r16),R(r17),R(r18),R(r19),R(r20),R(r21),R(r22),R(r23), \ /* 24 */ R(r24),R(r25),R(r26),R(r27),R(r28),R(r29),R(r30),R(r31), \ /* 32 */ F(f0), F(f1), F(f2), F(f3), F(f4), F(f5), F(f6), F(f7), \ /* 40 */ F(f8), F(f9), F(f10),F(f11),F(f12),F(f13),F(f14),F(f15), \ /* 48 */ F(f16),F(f17),F(f18),F(f19),F(f20),F(f21),F(f22),F(f23), \ /* 56 */ F(f24),F(f25),F(f26),F(f27),F(f28),F(f29),F(f30),F(f31), \ /* 64 */ R(pc), R(ps) /* UISA-level SPRs for PowerPC. */ #define PPC_UISA_SPRS \ /* 66 */ R4(cr), R(lr), R(ctr), R4(xer), R0 /* Segment registers, for PowerPC. */ #define PPC_SEGMENT_REGS \ /* 71 */ R32(sr0), R32(sr1), R32(sr2), R32(sr3), \ /* 75 */ R32(sr4), R32(sr5), R32(sr6), R32(sr7), \ /* 79 */ R32(sr8), R32(sr9), R32(sr10), R32(sr11), \ /* 83 */ R32(sr12), R32(sr13), R32(sr14), R32(sr15) /* OEA SPRs for PowerPC. */ #define PPC_OEA_SPRS \ /* 87 */ R4(pvr), \ /* 88 */ R(ibat0u), R(ibat0l), R(ibat1u), R(ibat1l), \ /* 92 */ R(ibat2u), R(ibat2l), R(ibat3u), R(ibat3l), \ /* 96 */ R(dbat0u), R(dbat0l), R(dbat1u), R(dbat1l), \ /* 100 */ R(dbat2u), R(dbat2l), R(dbat3u), R(dbat3l), \ /* 104 */ R(sdr1), R64(asr), R(dar), R4(dsisr), \ /* 108 */ R(sprg0), R(sprg1), R(sprg2), R(sprg3), \ /* 112 */ R(srr0), R(srr1), R(tbl), R(tbu), \ /* 116 */ R4(dec), R(dabr), R4(ear) /* IBM POWER (pre-PowerPC) architecture, user-level view. We only cover user-level SPR's. */ static const struct reg registers_power[] = { COMMON_UISA_REGS, /* 66 */ R4(cnd), R(lr), R(cnt), R4(xer), R4(mq) }; /* PowerPC UISA - a PPC processor as viewed by user-level code. A UISA-only view of the PowerPC. */ static const struct reg registers_powerpc[] = { COMMON_UISA_REGS, PPC_UISA_SPRS }; /* IBM PowerPC 403. */ static const struct reg registers_403[] = { COMMON_UISA_REGS, PPC_UISA_SPRS, PPC_SEGMENT_REGS, PPC_OEA_SPRS, /* 119 */ R(icdbdr), R(esr), R(dear), R(evpr), /* 123 */ R(cdbcr), R(tsr), R(tcr), R(pit), /* 127 */ R(tbhi), R(tblo), R(srr2), R(srr3), /* 131 */ R(dbsr), R(dbcr), R(iac1), R(iac2), /* 135 */ R(dac1), R(dac2), R(dccr), R(iccr), /* 139 */ R(pbl1), R(pbu1), R(pbl2), R(pbu2) }; /* IBM PowerPC 403GC. */ static const struct reg registers_403GC[] = { COMMON_UISA_REGS, PPC_UISA_SPRS, PPC_SEGMENT_REGS, PPC_OEA_SPRS, /* 119 */ R(icdbdr), R(esr), R(dear), R(evpr), /* 123 */ R(cdbcr), R(tsr), R(tcr), R(pit), /* 127 */ R(tbhi), R(tblo), R(srr2), R(srr3), /* 131 */ R(dbsr), R(dbcr), R(iac1), R(iac2), /* 135 */ R(dac1), R(dac2), R(dccr), R(iccr), /* 139 */ R(pbl1), R(pbu1), R(pbl2), R(pbu2), /* 143 */ R(zpr), R(pid), R(sgr), R(dcwr), /* 147 */ R(tbhu), R(tblu) }; /* Motorola PowerPC 505. */ static const struct reg registers_505[] = { COMMON_UISA_REGS, PPC_UISA_SPRS, PPC_SEGMENT_REGS, PPC_OEA_SPRS, /* 119 */ R(eie), R(eid), R(nri) }; /* Motorola PowerPC 860 or 850. */ static const struct reg registers_860[] = { COMMON_UISA_REGS, PPC_UISA_SPRS, PPC_SEGMENT_REGS, PPC_OEA_SPRS, /* 119 */ R(eie), R(eid), R(nri), R(cmpa), /* 123 */ R(cmpb), R(cmpc), R(cmpd), R(icr), /* 127 */ R(der), R(counta), R(countb), R(cmpe), /* 131 */ R(cmpf), R(cmpg), R(cmph), R(lctrl1), /* 135 */ R(lctrl2), R(ictrl), R(bar), R(ic_cst), /* 139 */ R(ic_adr), R(ic_dat), R(dc_cst), R(dc_adr), /* 143 */ R(dc_dat), R(dpdr), R(dpir), R(immr), /* 147 */ R(mi_ctr), R(mi_ap), R(mi_epn), R(mi_twc), /* 151 */ R(mi_rpn), R(md_ctr), R(m_casid), R(md_ap), /* 155 */ R(md_epn), R(md_twb), R(md_twc), R(md_rpn), /* 159 */ R(m_tw), R(mi_dbcam), R(mi_dbram0), R(mi_dbram1), /* 163 */ R(md_dbcam), R(md_dbram0), R(md_dbram1) }; /* Motorola PowerPC 601. Note that the 601 has different register numbers for reading and writing RTCU and RTCL. However, how one reads and writes a register is the stub's problem. */ static const struct reg registers_601[] = { COMMON_UISA_REGS, PPC_UISA_SPRS, PPC_SEGMENT_REGS, PPC_OEA_SPRS, /* 119 */ R(hid0), R(hid1), R(iabr), R(dabr), /* 123 */ R(pir), R(mq), R(rtcu), R(rtcl) }; /* Motorola PowerPC 602. */ static const struct reg registers_602[] = { COMMON_UISA_REGS, PPC_UISA_SPRS, PPC_SEGMENT_REGS, PPC_OEA_SPRS, /* 119 */ R(hid0), R(hid1), R(iabr), R0, /* 123 */ R0, R(tcr), R(ibr), R(esassr), /* 127 */ R(sebr), R(ser), R(sp), R(lt) }; /* Motorola/IBM PowerPC 603 or 603e. */ static const struct reg registers_603[] = { COMMON_UISA_REGS, PPC_UISA_SPRS, PPC_SEGMENT_REGS, PPC_OEA_SPRS, /* 119 */ R(hid0), R(hid1), R(iabr), R0, /* 123 */ R0, R(dmiss), R(dcmp), R(hash1), /* 127 */ R(hash2), R(imiss), R(icmp), R(rpa) }; /* Motorola PowerPC 604 or 604e. */ static const struct reg registers_604[] = { COMMON_UISA_REGS, PPC_UISA_SPRS, PPC_SEGMENT_REGS, PPC_OEA_SPRS, /* 119 */ R(hid0), R(hid1), R(iabr), R(dabr), /* 123 */ R(pir), R(mmcr0), R(pmc1), R(pmc2), /* 127 */ R(sia), R(sda) }; /* Motorola/IBM PowerPC 750 or 740. */ static const struct reg registers_750[] = { COMMON_UISA_REGS, PPC_UISA_SPRS, PPC_SEGMENT_REGS, PPC_OEA_SPRS, /* 119 */ R(hid0), R(hid1), R(iabr), R(dabr), /* 123 */ R0, R(ummcr0), R(upmc1), R(upmc2), /* 127 */ R(usia), R(ummcr1), R(upmc3), R(upmc4), /* 131 */ R(mmcr0), R(pmc1), R(pmc2), R(sia), /* 135 */ R(mmcr1), R(pmc3), R(pmc4), R(l2cr), /* 139 */ R(ictc), R(thrm1), R(thrm2), R(thrm3) }; /* Information about a particular processor variant. */ struct variant { /* Name of this variant. */ char *name; /* English description of the variant. */ char *description; /* bfd_arch_info.arch corresponding to variant. */ enum bfd_architecture arch; /* bfd_arch_info.mach corresponding to variant. */ unsigned long mach; /* Table of register names; registers[R] is the name of the register number R. */ int nregs; const struct reg *regs; }; #define num_registers(list) (sizeof (list) / sizeof((list)[0])) /* Information in this table comes from the following web sites: IBM: http://www.chips.ibm.com:80/products/embedded/ Motorola: http://www.mot.com/SPS/PowerPC/ I'm sure I've got some of the variant descriptions not quite right. Please report any inaccuracies you find to GDB's maintainer. If you add entries to this table, please be sure to allow the new value as an argument to the --with-cpu flag, in configure.in. */ static const struct variant variants[] = { {"powerpc", "PowerPC user-level", bfd_arch_powerpc, bfd_mach_ppc, num_registers (registers_powerpc), registers_powerpc}, {"power", "POWER user-level", bfd_arch_rs6000, bfd_mach_rs6k, num_registers (registers_power), registers_power}, {"403", "IBM PowerPC 403", bfd_arch_powerpc, bfd_mach_ppc_403, num_registers (registers_403), registers_403}, {"601", "Motorola PowerPC 601", bfd_arch_powerpc, bfd_mach_ppc_601, num_registers (registers_601), registers_601}, {"602", "Motorola PowerPC 602", bfd_arch_powerpc, bfd_mach_ppc_602, num_registers (registers_602), registers_602}, {"603", "Motorola/IBM PowerPC 603 or 603e", bfd_arch_powerpc, bfd_mach_ppc_603, num_registers (registers_603), registers_603}, {"604", "Motorola PowerPC 604 or 604e", bfd_arch_powerpc, 604, num_registers (registers_604), registers_604}, {"403GC", "IBM PowerPC 403GC", bfd_arch_powerpc, bfd_mach_ppc_403gc, num_registers (registers_403GC), registers_403GC}, {"505", "Motorola PowerPC 505", bfd_arch_powerpc, bfd_mach_ppc_505, num_registers (registers_505), registers_505}, {"860", "Motorola PowerPC 860 or 850", bfd_arch_powerpc, bfd_mach_ppc_860, num_registers (registers_860), registers_860}, {"750", "Motorola/IBM PowerPC 750 or 740", bfd_arch_powerpc, bfd_mach_ppc_750, num_registers (registers_750), registers_750}, /* FIXME: I haven't checked the register sets of the following. */ {"620", "Motorola PowerPC 620", bfd_arch_powerpc, bfd_mach_ppc_620, num_registers (registers_powerpc), registers_powerpc}, {"a35", "PowerPC A35", bfd_arch_powerpc, bfd_mach_ppc_a35, num_registers (registers_powerpc), registers_powerpc}, {"rs1", "IBM POWER RS1", bfd_arch_rs6000, bfd_mach_rs6k_rs1, num_registers (registers_power), registers_power}, {"rsc", "IBM POWER RSC", bfd_arch_rs6000, bfd_mach_rs6k_rsc, num_registers (registers_power), registers_power}, {"rs2", "IBM POWER RS2", bfd_arch_rs6000, bfd_mach_rs6k_rs2, num_registers (registers_power), registers_power}, {0, 0, 0, 0} }; #undef num_registers /* Look up the variant named NAME in the `variants' table. Return a pointer to the struct variant, or null if we couldn't find it. */ static const struct variant * find_variant_by_name (char *name) { const struct variant *v; for (v = variants; v->name; v++) if (!strcmp (name, v->name)) return v; return NULL; } /* Return the variant corresponding to architecture ARCH and machine number MACH. If no such variant exists, return null. */ static const struct variant * find_variant_by_arch (enum bfd_architecture arch, unsigned long mach) { const struct variant *v; for (v = variants; v->name; v++) if (arch == v->arch && mach == v->mach) return v; return NULL; } static void process_note_abi_tag_sections (bfd *abfd, asection *sect, void *obj) { int *os_ident_ptr = obj; const char *name; unsigned int sectsize; name = bfd_get_section_name (abfd, sect); sectsize = bfd_section_size (abfd, sect); if (strcmp (name, ".note.ABI-tag") == 0 && sectsize > 0) { unsigned int name_length, data_length, note_type; char *note = alloca (sectsize); bfd_get_section_contents (abfd, sect, note, (file_ptr) 0, (bfd_size_type) sectsize); name_length = bfd_h_get_32 (abfd, note); data_length = bfd_h_get_32 (abfd, note + 4); note_type = bfd_h_get_32 (abfd, note + 8); if (name_length == 4 && data_length == 16 && note_type == 1 && strcmp (note + 12, "GNU") == 0) { int os_number = bfd_h_get_32 (abfd, note + 16); /* The case numbers are from abi-tags in glibc */ switch (os_number) { case 0 : *os_ident_ptr = ELFOSABI_LINUX; break; case 1 : *os_ident_ptr = ELFOSABI_HURD; break; case 2 : *os_ident_ptr = ELFOSABI_SOLARIS; break; default : internal_error (__FILE__, __LINE__, "process_note_abi_sections: unknown OS number %d", os_number); break; } } } } /* Return one of the ELFOSABI_ constants for BFDs representing ELF executables. If it's not an ELF executable or if the OS/ABI couldn't be determined, simply return -1. */ static int get_elfosabi (bfd *abfd) { int elfosabi = -1; if (abfd != NULL && bfd_get_flavour (abfd) == bfd_target_elf_flavour) { elfosabi = elf_elfheader (abfd)->e_ident[EI_OSABI]; /* When elfosabi is 0 (ELFOSABI_NONE), this is supposed to indicate that we're on a SYSV system. However, GNU/Linux uses a note section to record OS/ABI info, but leaves e_ident[EI_OSABI] zero. So we have to check the note sections too. */ if (elfosabi == 0) { bfd_map_over_sections (abfd, process_note_abi_tag_sections, &elfosabi); } } return elfosabi; } /* Initialize the current architecture based on INFO. If possible, re-use an architecture from ARCHES, which is a list of architectures already created during this debugging session. Called e.g. at program startup, when reading a core file, and when reading a binary file. */ static struct gdbarch * rs6000_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) { struct gdbarch *gdbarch; struct gdbarch_tdep *tdep; int wordsize, from_xcoff_exec, from_elf_exec, power, i, off; struct reg *regs; const struct variant *v; enum bfd_architecture arch; unsigned long mach; bfd abfd; int osabi, sysv_abi; from_xcoff_exec = info.abfd && info.abfd->format == bfd_object && bfd_get_flavour (info.abfd) == bfd_target_xcoff_flavour; from_elf_exec = info.abfd && info.abfd->format == bfd_object && bfd_get_flavour (info.abfd) == bfd_target_elf_flavour; sysv_abi = info.abfd && bfd_get_flavour (info.abfd) == bfd_target_elf_flavour; osabi = get_elfosabi (info.abfd); /* Check word size. If INFO is from a binary file, infer it from that, else use the previously-inferred size. */ if (from_xcoff_exec) { if (xcoff_data (info.abfd)->xcoff64) wordsize = 8; else wordsize = 4; } else if (from_elf_exec) { if (elf_elfheader (info.abfd)->e_ident[EI_CLASS] == ELFCLASS64) wordsize = 8; else wordsize = 4; } else { tdep = TDEP; if (tdep) wordsize = tdep->wordsize; else wordsize = 4; } /* Find a candidate among extant architectures. */ for (arches = gdbarch_list_lookup_by_info (arches, &info); arches != NULL; arches = gdbarch_list_lookup_by_info (arches->next, &info)) { /* Word size in the various PowerPC bfd_arch_info structs isn't meaningful, because 64-bit CPUs can run in 32-bit mode. So, perform separate word size check. */ tdep = gdbarch_tdep (arches->gdbarch); if (tdep && tdep->wordsize == wordsize && tdep->osabi == osabi) return arches->gdbarch; } /* None found, create a new architecture from INFO, whose bfd_arch_info validity depends on the source: - executable useless - rs6000_host_arch() good - core file good - "set arch" trust blindly - GDB startup useless but harmless */ if (!from_xcoff_exec) { arch = info.bfd_architecture; mach = info.bfd_arch_info->mach; } else { arch = bfd_arch_powerpc; mach = 0; bfd_default_set_arch_mach (&abfd, arch, mach); info.bfd_arch_info = bfd_get_arch_info (&abfd); } tdep = xmalloc (sizeof (struct gdbarch_tdep)); tdep->wordsize = wordsize; tdep->osabi = osabi; gdbarch = gdbarch_alloc (&info, tdep); power = arch == bfd_arch_rs6000; /* Select instruction printer. */ tm_print_insn = arch == power ? print_insn_rs6000 : info.byte_order == BIG_ENDIAN ? print_insn_big_powerpc : print_insn_little_powerpc; /* Choose variant. */ v = find_variant_by_arch (arch, mach); if (!v) v = find_variant_by_name (power ? "power" : "powerpc"); tdep->regs = v->regs; /* Calculate byte offsets in raw register array. */ tdep->regoff = xmalloc (v->nregs * sizeof (int)); for (i = off = 0; i < v->nregs; i++) { tdep->regoff[i] = off; off += regsize (v->regs + i, wordsize); } set_gdbarch_read_pc (gdbarch, generic_target_read_pc); set_gdbarch_write_pc (gdbarch, generic_target_write_pc); set_gdbarch_read_fp (gdbarch, generic_target_read_fp); set_gdbarch_write_fp (gdbarch, generic_target_write_fp); set_gdbarch_read_sp (gdbarch, generic_target_read_sp); set_gdbarch_write_sp (gdbarch, generic_target_write_sp); set_gdbarch_num_regs (gdbarch, v->nregs); set_gdbarch_sp_regnum (gdbarch, 1); set_gdbarch_fp_regnum (gdbarch, 1); set_gdbarch_pc_regnum (gdbarch, 64); set_gdbarch_register_name (gdbarch, rs6000_register_name); set_gdbarch_register_size (gdbarch, wordsize); set_gdbarch_register_bytes (gdbarch, off); set_gdbarch_register_byte (gdbarch, rs6000_register_byte); set_gdbarch_register_raw_size (gdbarch, rs6000_register_raw_size); set_gdbarch_max_register_raw_size (gdbarch, 8); set_gdbarch_register_virtual_size (gdbarch, rs6000_register_virtual_size); set_gdbarch_max_register_virtual_size (gdbarch, 8); set_gdbarch_register_virtual_type (gdbarch, rs6000_register_virtual_type); set_gdbarch_ptr_bit (gdbarch, wordsize * TARGET_CHAR_BIT); set_gdbarch_short_bit (gdbarch, 2 * TARGET_CHAR_BIT); set_gdbarch_int_bit (gdbarch, 4 * TARGET_CHAR_BIT); set_gdbarch_long_bit (gdbarch, wordsize * TARGET_CHAR_BIT); set_gdbarch_long_long_bit (gdbarch, 8 * TARGET_CHAR_BIT); set_gdbarch_float_bit (gdbarch, 4 * TARGET_CHAR_BIT); set_gdbarch_double_bit (gdbarch, 8 * TARGET_CHAR_BIT); set_gdbarch_long_double_bit (gdbarch, 8 * TARGET_CHAR_BIT); set_gdbarch_use_generic_dummy_frames (gdbarch, 1); set_gdbarch_call_dummy_length (gdbarch, 0); set_gdbarch_call_dummy_location (gdbarch, AT_ENTRY_POINT); set_gdbarch_call_dummy_address (gdbarch, entry_point_address); set_gdbarch_call_dummy_breakpoint_offset_p (gdbarch, 1); set_gdbarch_call_dummy_breakpoint_offset (gdbarch, 0); set_gdbarch_call_dummy_start_offset (gdbarch, 0); set_gdbarch_pc_in_call_dummy (gdbarch, generic_pc_in_call_dummy); set_gdbarch_call_dummy_p (gdbarch, 1); set_gdbarch_call_dummy_stack_adjust_p (gdbarch, 0); set_gdbarch_get_saved_register (gdbarch, generic_get_saved_register); set_gdbarch_fix_call_dummy (gdbarch, rs6000_fix_call_dummy); set_gdbarch_push_dummy_frame (gdbarch, generic_push_dummy_frame); set_gdbarch_save_dummy_frame_tos (gdbarch, generic_save_dummy_frame_tos); set_gdbarch_push_return_address (gdbarch, ppc_push_return_address); set_gdbarch_believe_pcc_promotion (gdbarch, 1); set_gdbarch_coerce_float_to_double (gdbarch, rs6000_coerce_float_to_double); set_gdbarch_register_convertible (gdbarch, rs6000_register_convertible); set_gdbarch_register_convert_to_virtual (gdbarch, rs6000_register_convert_to_virtual); set_gdbarch_register_convert_to_raw (gdbarch, rs6000_register_convert_to_raw); set_gdbarch_extract_return_value (gdbarch, rs6000_extract_return_value); if (sysv_abi) set_gdbarch_push_arguments (gdbarch, ppc_sysv_abi_push_arguments); else set_gdbarch_push_arguments (gdbarch, rs6000_push_arguments); set_gdbarch_store_struct_return (gdbarch, rs6000_store_struct_return); set_gdbarch_store_return_value (gdbarch, rs6000_store_return_value); set_gdbarch_extract_struct_value_address (gdbarch, rs6000_extract_struct_value_address); set_gdbarch_use_struct_convention (gdbarch, generic_use_struct_convention); set_gdbarch_pop_frame (gdbarch, rs6000_pop_frame); set_gdbarch_skip_prologue (gdbarch, rs6000_skip_prologue); set_gdbarch_inner_than (gdbarch, core_addr_lessthan); set_gdbarch_decr_pc_after_break (gdbarch, 0); set_gdbarch_function_start_offset (gdbarch, 0); set_gdbarch_breakpoint_from_pc (gdbarch, rs6000_breakpoint_from_pc); /* Not sure on this. FIXMEmgo */ set_gdbarch_frame_args_skip (gdbarch, 8); set_gdbarch_frame_chain_valid (gdbarch, file_frame_chain_valid); if (osabi == ELFOSABI_LINUX) { set_gdbarch_frameless_function_invocation (gdbarch, ppc_linux_frameless_function_invocation); set_gdbarch_frame_chain (gdbarch, ppc_linux_frame_chain); set_gdbarch_frame_saved_pc (gdbarch, ppc_linux_frame_saved_pc); set_gdbarch_frame_init_saved_regs (gdbarch, ppc_linux_frame_init_saved_regs); set_gdbarch_init_extra_frame_info (gdbarch, ppc_linux_init_extra_frame_info); set_gdbarch_memory_remove_breakpoint (gdbarch, ppc_linux_memory_remove_breakpoint); } else { set_gdbarch_frameless_function_invocation (gdbarch, rs6000_frameless_function_invocation); set_gdbarch_frame_chain (gdbarch, rs6000_frame_chain); set_gdbarch_frame_saved_pc (gdbarch, rs6000_frame_saved_pc); set_gdbarch_frame_init_saved_regs (gdbarch, rs6000_frame_init_saved_regs); set_gdbarch_init_extra_frame_info (gdbarch, rs6000_init_extra_frame_info); /* Handle RS/6000 function pointers. */ set_gdbarch_convert_from_func_ptr_addr (gdbarch, rs6000_convert_from_func_ptr_addr); } set_gdbarch_frame_args_address (gdbarch, rs6000_frame_args_address); set_gdbarch_frame_locals_address (gdbarch, rs6000_frame_args_address); set_gdbarch_saved_pc_after_call (gdbarch, rs6000_saved_pc_after_call); /* We can't tell how many args there are now that the C compiler delays popping them. */ set_gdbarch_frame_num_args (gdbarch, frame_num_args_unknown); return gdbarch; } /* Initialization code. */ void _initialize_rs6000_tdep (void) { register_gdbarch_init (bfd_arch_rs6000, rs6000_gdbarch_init); register_gdbarch_init (bfd_arch_powerpc, rs6000_gdbarch_init); }