/* Print values for GNU debugger GDB. Copyright (C) 1986-1991 Free Software Foundation, Inc. This file is part of GDB. GDB is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 1, or (at your option) any later version. GDB is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GDB; see the file COPYING. If not, write to the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ #include #include #include "defs.h" #include "param.h" #include "frame.h" #include "symtab.h" #include "value.h" #include "expression.h" #include "gdbcore.h" #include "gdbcmd.h" #include "target.h" extern int asm_demangle; /* Whether to demangle syms in asm printouts */ extern struct block *get_current_block (); static void print_frame_nameless_args (); struct format_data { int count; char format; char size; }; /* Last specified output format. */ static char last_format = 'x'; /* Last specified examination size. 'b', 'h', 'w' or `q'. */ static char last_size = 'w'; /* Default address to examine next. */ static CORE_ADDR next_address; /* Last address examined. */ static CORE_ADDR last_examine_address; /* Contents of last address examined. This is not valid past the end of the `x' command! */ static value last_examine_value; /* Number of auto-display expression currently being displayed. So that we can deleted it if we get an error or a signal within it. -1 when not doing one. */ int current_display_number; /* Flag to low-level print routines that this value is being printed in an epoch window. We'd like to pass this as a parameter, but every routine would need to take it. Perhaps we can encapsulate this in the I/O stream once we have GNU stdio. */ int inspect_it = 0; static void do_one_display (); void do_displays (); void print_scalar_formatted (); /* Decode a format specification. *STRING_PTR should point to it. OFORMAT and OSIZE are used as defaults for the format and size if none are given in the format specification. If OSIZE is zero, then the size field of the returned value should be set only if a size is explicitly specified by the user. The structure returned describes all the data found in the specification. In addition, *STRING_PTR is advanced past the specification and past all whitespace following it. */ struct format_data decode_format (string_ptr, oformat, osize) char **string_ptr; char oformat; char osize; { struct format_data val; register char *p = *string_ptr; val.format = '?'; val.size = '?'; val.count = 1; if (*p >= '0' && *p <= '9') val.count = atoi (p); while (*p >= '0' && *p <= '9') p++; /* Now process size or format letters that follow. */ while (1) { if (*p == 'b' || *p == 'h' || *p == 'w' || *p == 'g') val.size = *p++; #ifdef LONG_LONG else if (*p == 'l') { val.size = 'g'; p++; } #endif else if (*p >= 'a' && *p <= 'z') val.format = *p++; else break; } #ifndef LONG_LONG /* Make sure 'g' size is not used on integer types. Well, actually, we can handle hex. */ if (val.size == 'g' && val.format != 'f' && val.format != 'x') val.size = 'w'; #endif while (*p == ' ' || *p == '\t') p++; *string_ptr = p; /* Set defaults for format and size if not specified. */ if (val.format == '?') { if (val.size == '?') { /* Neither has been specified. */ val.format = oformat; val.size = osize; } else /* If a size is specified, any format makes a reasonable default except 'i'. */ val.format = oformat == 'i' ? 'x' : oformat; } else if (val.size == '?') switch (val.format) { case 'a': case 's': /* Addresses must be words. */ val.size = osize ? 'w' : osize; break; case 'f': /* Floating point has to be word or giantword. */ if (osize == 'w' || osize == 'g') val.size = osize; else /* Default it to giantword if the last used size is not appropriate. */ val.size = osize ? 'g' : osize; break; case 'c': /* Characters default to one byte. */ val.size = osize ? 'b' : osize; break; default: /* The default is the size most recently specified. */ val.size = osize; } return val; } /* Print value VAL on stdout according to FORMAT, a letter or 0. Do not end with a newline. 0 means print VAL according to its own type. SIZE is the letter for the size of datum being printed. This is used to pad hex numbers so they line up. */ static void print_formatted (val, format, size) register value val; register char format; char size; { int len = TYPE_LENGTH (VALUE_TYPE (val)); if (VALUE_LVAL (val) == lval_memory) next_address = VALUE_ADDRESS (val) + len; switch (format) { case 's': next_address = VALUE_ADDRESS (val) + value_print (value_addr (val), stdout, format, Val_pretty_default); break; case 'i': next_address = VALUE_ADDRESS (val) + print_insn (VALUE_ADDRESS (val), stdout); break; default: if (format == 0 || TYPE_CODE (VALUE_TYPE (val)) == TYPE_CODE_ARRAY || TYPE_CODE (VALUE_TYPE (val)) == TYPE_CODE_STRUCT || TYPE_CODE (VALUE_TYPE (val)) == TYPE_CODE_UNION || VALUE_REPEATED (val)) value_print (val, stdout, format, Val_pretty_default); else print_scalar_formatted (VALUE_CONTENTS (val), VALUE_TYPE (val), format, size, stdout); } } /* Print a scalar of data of type TYPE, pointed to in GDB by VALADDR, according to letters FORMAT and SIZE on STREAM. FORMAT may not be zero. Formats s and i are not supported at this level. This is how the elements of an array or structure are printed with a format. */ void print_scalar_formatted (valaddr, type, format, size, stream) char *valaddr; struct type *type; char format; int size; FILE *stream; { LONGEST val_long; int len = TYPE_LENGTH (type); if (size == 'g' && sizeof (LONGEST) < 8 && format == 'x') { /* ok, we're going to have to get fancy here. Assumption: a long is four bytes. FIXME. */ unsigned long v1, v2, tmp; v1 = unpack_long (builtin_type_long, valaddr); v2 = unpack_long (builtin_type_long, valaddr + 4); #if TARGET_BYTE_ORDER == LITTLE_ENDIAN /* Swap the two for printing */ tmp = v1; v1 = v2; v2 = tmp; #endif switch (format) { case 'x': fprintf_filtered (stream, "0x%08x%08x", v1, v2); break; default: error ("Output size \"g\" unimplemented for format \"%c\".", format); } return; } val_long = unpack_long (type, valaddr); /* If value is unsigned, truncate it in case negative. */ if (format != 'd') { if (len == sizeof (char)) val_long &= (1 << 8 * sizeof(char)) - 1; else if (len == sizeof (short)) val_long &= (1 << 8 * sizeof(short)) - 1; else if (len == sizeof (long)) val_long &= (unsigned long) - 1; } switch (format) { case 'x': if (!size) { /* no size specified, like in print. Print varying # of digits. */ #if defined (LONG_LONG) fprintf_filtered (stream, "0x%llx", val_long); #else /* not LONG_LONG. */ fprintf_filtered (stream, "0x%lx", val_long); #endif /* not LONG_LONG. */ } else #if defined (LONG_LONG) switch (size) { case 'b': fprintf_filtered (stream, "0x%02llx", val_long); break; case 'h': fprintf_filtered (stream, "0x%04llx", val_long); break; case 'w': fprintf_filtered (stream, "0x%08llx", val_long); break; case 'g': fprintf_filtered (stream, "0x%016llx", val_long); break; default: error ("Undefined output size \"%c\".", size); } #else /* not LONG_LONG. */ switch (size) { case 'b': fprintf_filtered (stream, "0x%02x", val_long); break; case 'h': fprintf_filtered (stream, "0x%04x", val_long); break; case 'w': fprintf_filtered (stream, "0x%08x", val_long); break; case 'g': fprintf_filtered (stream, "0x%016x", val_long); break; default: error ("Undefined output size \"%c\".", size); } #endif /* not LONG_LONG */ break; case 'd': #ifdef LONG_LONG fprintf_filtered (stream, "%lld", val_long); #else fprintf_filtered (stream, "%d", val_long); #endif break; case 'u': #ifdef LONG_LONG fprintf_filtered (stream, "%llu", val_long); #else fprintf_filtered (stream, "%u", val_long); #endif break; case 'o': if (val_long) #ifdef LONG_LONG fprintf_filtered (stream, "0%llo", val_long); #else fprintf_filtered (stream, "0%o", val_long); #endif else fprintf_filtered (stream, "0"); break; case 'a': print_address (unpack_pointer (type, valaddr), stream); break; case 'c': value_print (value_from_long (builtin_type_char, val_long), stream, 0, Val_pretty_default); break; case 'f': if (len == sizeof (float)) type = builtin_type_float; else if (len == sizeof (double)) type = builtin_type_double; print_floating (valaddr, type, stream); break; case 0: abort (); case 't': /* Binary; 't' stands for "two". */ { char bits[8*(sizeof val_long) + 1]; char *cp = bits; int width; if (!size) width = 8*(sizeof val_long); else switch (size) { case 'b': width = 8; break; case 'h': width = 16; break; case 'w': width = 32; break; case 'g': width = 64; break; default: error ("Undefined output size \"%c\".", size); } bits[width] = '\0'; while (width-- > 0) { bits[width] = (val_long & 1) ? '1' : '0'; val_long >>= 1; } if (!size) { while (*cp && *cp == '0') cp++; if (*cp == '\0') cp--; } fprintf_filtered (stream, cp); } break; default: error ("Undefined output format \"%c\".", format); } } /* Specify default address for `x' command. `info lines' uses this. */ void set_next_address (addr) CORE_ADDR addr; { next_address = addr; /* Make address available to the user as $_. */ set_internalvar (lookup_internalvar ("_"), value_from_long (builtin_type_int, (LONGEST) addr)); } /* Optionally print address ADDR symbolically as on STREAM. DO_DEMANGLE controls whether to print a symbol in its native "raw" form, or to interpret it as a possible C++ name and convert it back to source form. */ void print_address_symbolic (addr, stream, do_demangle) CORE_ADDR addr; FILE *stream; int do_demangle; { int name_location; register int i = find_pc_misc_function (addr); /* If nothing comes out, don't print anything symbolic. */ if (i < 0) return; fputs_filtered (" <", stream); if (do_demangle) fputs_demangled (misc_function_vector[i].name, stream, 1); else fputs_filtered (misc_function_vector[i].name, stream); name_location = misc_function_vector[i].address; if (addr - name_location) fprintf_filtered (stream, "+%d>", addr - name_location); else fputs_filtered (">", stream); } /* Print address ADDR symbolically on STREAM. First print it as a number. Then perhaps print after the number. */ void print_address (addr, stream) CORE_ADDR addr; FILE *stream; { fprintf_filtered (stream, "0x%x", addr); print_address_symbolic (addr, stream, asm_demangle); } /* Print address ADDR symbolically on STREAM. Parameter DEMANGLE controls whether to print the symbolic name "raw" or demangled. */ void print_address_demangle (addr, stream, do_demangle) CORE_ADDR addr; FILE *stream; int do_demangle; { fprintf_filtered (stream, "0x%x", addr); print_address_symbolic (addr, stream, do_demangle); } /* Examine data at address ADDR in format FMT. Fetch it from memory and print on stdout. */ static void do_examine (fmt, addr) struct format_data fmt; CORE_ADDR addr; { register char format = 0; register char size; register int count = 1; struct type *val_type; register int i; register int maxelts; format = fmt.format; size = fmt.size; count = fmt.count; next_address = addr; /* String or instruction format implies fetch single bytes regardless of the specified size. */ if (format == 's' || format == 'i') size = 'b'; if (size == 'b') val_type = builtin_type_char; else if (size == 'h') val_type = builtin_type_short; else if (size == 'w') val_type = builtin_type_long; else if (size == 'g') #ifndef LONG_LONG val_type = builtin_type_double; #else val_type = builtin_type_long_long; #endif maxelts = 8; if (size == 'w') maxelts = 4; if (size == 'g') maxelts = 2; if (format == 's' || format == 'i') maxelts = 1; /* Print as many objects as specified in COUNT, at most maxelts per line, with the address of the next one at the start of each line. */ while (count > 0) { print_address (next_address, stdout); printf_filtered (":"); for (i = maxelts; i > 0 && count > 0; i--, count--) { printf_filtered ("\t"); /* Note that print_formatted sets next_address for the next object. */ last_examine_address = next_address; last_examine_value = value_at (val_type, next_address); print_formatted (last_examine_value, format, size); } printf_filtered ("\n"); fflush (stdout); } } static void validate_format (fmt, cmdname) struct format_data fmt; char *cmdname; { if (fmt.size != 0) error ("Size letters are meaningless in \"%s\" command.", cmdname); if (fmt.count != 1) error ("Item count other than 1 is meaningless in \"%s\" command.", cmdname); if (fmt.format == 'i' || fmt.format == 's') error ("Format letter \"%c\" is meaningless in \"%s\" command.", fmt.format, cmdname); } static void print_command_1 (exp, inspect, voidprint) char *exp; int inspect; int voidprint; { struct expression *expr; register struct cleanup *old_chain = 0; register char format = 0; register value val; struct format_data fmt; int cleanup = 0; /* Pass inspect flag to the rest of the print routines in a global (sigh). */ inspect_it = inspect; if (exp && *exp == '/') { exp++; fmt = decode_format (&exp, last_format, 0); validate_format (fmt, "print"); last_format = format = fmt.format; } else { fmt.count = 1; fmt.format = 0; fmt.size = 0; } if (exp && *exp) { extern int objectprint; struct type *type; expr = parse_c_expression (exp); old_chain = make_cleanup (free_current_contents, &expr); cleanup = 1; val = evaluate_expression (expr); /* C++: figure out what type we actually want to print it as. */ type = VALUE_TYPE (val); if (objectprint && (TYPE_CODE (type) == TYPE_CODE_PTR || TYPE_CODE (type) == TYPE_CODE_REF) && TYPE_CODE (TYPE_TARGET_TYPE (type)) == TYPE_CODE_STRUCT) { value v; v = value_from_vtable_info (val, TYPE_TARGET_TYPE (type)); if (v != 0) { val = v; type = VALUE_TYPE (val); } } } else val = access_value_history (0); if (voidprint || (val && VALUE_TYPE (val) && TYPE_CODE (VALUE_TYPE (val)) != TYPE_CODE_VOID)) { int histindex = record_latest_value (val); if (inspect) printf ("\031(gdb-makebuffer \"%s\" %d '(\"", exp, histindex); else if (histindex >= 0) printf_filtered ("$%d = ", histindex); print_formatted (val, format, fmt.size); printf_filtered ("\n"); if (inspect) printf("\") )\030"); } if (cleanup) do_cleanups (old_chain); inspect_it = 0; /* Reset print routines to normal */ } /* ARGSUSED */ static void print_command (exp, from_tty) char *exp; int from_tty; { print_command_1 (exp, 0, 1); } /* Same as print, except in epoch, it gets its own window */ /* ARGSUSED */ static void inspect_command (exp, from_tty) char *exp; int from_tty; { extern int epoch_interface; print_command_1 (exp, epoch_interface, 1); } /* Same as print, except it doesn't print void results. */ /* ARGSUSED */ static void call_command (exp, from_tty) char *exp; int from_tty; { print_command_1 (exp, 0, 0); } /* ARGSUSED */ static void output_command (exp, from_tty) char *exp; int from_tty; { struct expression *expr; register struct cleanup *old_chain; register char format = 0; register value val; struct format_data fmt; if (exp && *exp == '/') { exp++; fmt = decode_format (&exp, 0, 0); validate_format (fmt, "print"); format = fmt.format; } expr = parse_c_expression (exp); old_chain = make_cleanup (free_current_contents, &expr); val = evaluate_expression (expr); print_formatted (val, format, fmt.size); do_cleanups (old_chain); } /* ARGSUSED */ static void set_command (exp, from_tty) char *exp; int from_tty; { struct expression *expr = parse_c_expression (exp); register struct cleanup *old_chain = make_cleanup (free_current_contents, &expr); evaluate_expression (expr); do_cleanups (old_chain); } /* ARGSUSED */ static void address_info (exp, from_tty) char *exp; int from_tty; { register struct symbol *sym; register long val; int is_a_field_of_this; /* C++: lookup_symbol sets this to nonzero if exp is a field of `this'. */ if (exp == 0) error ("Argument required."); sym = lookup_symbol (exp, get_selected_block (), VAR_NAMESPACE, &is_a_field_of_this, (struct symtab **)NULL); if (sym == 0) { register int i; if (is_a_field_of_this) { printf ("Symbol \"%s\" is a field of the local class variable `this'\n", exp); return; } for (i = 0; i < misc_function_count; i++) if (!strcmp (misc_function_vector[i].name, exp)) break; if (i < misc_function_count) printf ("Symbol \"%s\" is at 0x%x in a file compiled without -g.\n", exp, misc_function_vector[i].address); else error ("No symbol \"%s\" in current context.", exp); return; } printf ("Symbol \"%s\" is ", SYMBOL_NAME (sym)); val = SYMBOL_VALUE (sym); switch (SYMBOL_CLASS (sym)) { case LOC_CONST: case LOC_CONST_BYTES: printf ("constant"); break; case LOC_LABEL: printf ("a label at address 0x%x", SYMBOL_VALUE_ADDRESS (sym)); break; case LOC_REGISTER: printf ("a variable in register %s", reg_names[val]); break; case LOC_STATIC: printf ("static at address 0x%x", SYMBOL_VALUE_ADDRESS (sym)); break; case LOC_REGPARM: printf ("an argument in register %s", reg_names[val]); break; case LOC_ARG: printf ("an argument at offset %ld", val); break; case LOC_LOCAL_ARG: printf ("an argument at frame offset %ld", val); break; case LOC_LOCAL: printf ("a local variable at frame offset %ld", val); break; case LOC_REF_ARG: printf ("a reference argument at offset %ld", val); break; case LOC_TYPEDEF: printf ("a typedef"); break; case LOC_BLOCK: printf ("a function at address 0x%x", BLOCK_START (SYMBOL_BLOCK_VALUE (sym))); break; case LOC_EXTERNAL: printf ("an external symbol at address 0x%x", SYMBOL_VALUE_ADDRESS (sym)); break; default: printf ("of unknown (botched) type"); break; } printf (".\n"); } static void x_command (exp, from_tty) char *exp; int from_tty; { struct expression *expr; struct format_data fmt; struct cleanup *old_chain; struct value *val; fmt.format = last_format; fmt.size = last_size; fmt.count = 1; if (exp && *exp == '/') { exp++; fmt = decode_format (&exp, last_format, last_size); last_size = fmt.size; last_format = fmt.format; } /* If we have an expression, evaluate it and use it as the address. */ if (exp != 0 && *exp != 0) { expr = parse_c_expression (exp); /* Cause expression not to be there any more if this command is repeated with Newline. But don't clobber a user-defined command's definition. */ if (from_tty) *exp = 0; old_chain = make_cleanup (free_current_contents, &expr); val = evaluate_expression (expr); if (TYPE_CODE (VALUE_TYPE (val)) == TYPE_CODE_REF) val = value_ind (val); /* In rvalue contexts, such as this, functions are coerced into pointers to functions. This makes "x/i main" work. */ if (/* last_format == 'i' && */ TYPE_CODE (VALUE_TYPE (val)) == TYPE_CODE_FUNC && VALUE_LVAL (val) == lval_memory) next_address = VALUE_ADDRESS (val); else next_address = value_as_pointer (val); do_cleanups (old_chain); } do_examine (fmt, next_address); /* Set a couple of internal variables if appropriate. */ if (last_examine_value) { /* Make last address examined available to the user as $_. */ set_internalvar (lookup_internalvar ("_"), value_from_long (builtin_type_int, (LONGEST) last_examine_address)); /* Make contents of last address examined available to the user as $__.*/ set_internalvar (lookup_internalvar ("__"), last_examine_value); } } /* Commands for printing types of things. */ /* Print type of EXP, or last thing in value history if EXP == NULL. show is passed to type_print. */ static void whatis_exp (exp, show) char *exp; int show; { struct expression *expr; register value val; register struct cleanup *old_chain; if (exp) { expr = parse_c_expression (exp); old_chain = make_cleanup (free_current_contents, &expr); val = evaluate_type (expr); } else val = access_value_history (0); printf_filtered ("type = "); type_print (VALUE_TYPE (val), "", stdout, show); printf_filtered ("\n"); if (exp) do_cleanups (old_chain); } /* ARGSUSED */ static void whatis_command (exp, from_tty) char *exp; int from_tty; { /* Most of the time users do not want to see all the fields in a structure. If they do they can use the "ptype" command. Hence the "-1" below. */ whatis_exp (exp, -1); } /* TYPENAME is either the name of a type, or an expression. */ /* ARGSUSED */ static void ptype_command (typename, from_tty) char *typename; int from_tty; { register char *p = typename; register int len; register struct block *b = target_has_stack ? get_current_block () : 0; register struct type *type; if (typename == 0) { whatis_exp (typename, 1); return; } while (*p && *p != ' ' && *p != '\t') p++; len = p - typename; while (*p == ' ' || *p == '\t') p++; if (len == 6 && !strncmp (typename, "struct", 6)) type = lookup_struct (p, b); else if (len == 5 && !strncmp (typename, "union", 5)) type = lookup_union (p, b); else if (len == 4 && !strncmp (typename, "enum", 4)) type = lookup_enum (p, b); else { type = lookup_typename (typename, b, 1); if (type == 0) { register struct symbol *sym = lookup_symbol (typename, b, STRUCT_NAMESPACE, 0, (struct symtab **)NULL); if (sym == 0) { /* It's not the name of a type, either VAR_NAMESPACE or STRUCT_NAMESPACE, so it must be an expression. */ whatis_exp (typename, 1); return; } printf_filtered ("No type named %s, but there is a ", typename); switch (TYPE_CODE (SYMBOL_TYPE (sym))) { case TYPE_CODE_STRUCT: printf_filtered ("struct"); break; case TYPE_CODE_UNION: printf_filtered ("union"); break; case TYPE_CODE_ENUM: printf_filtered ("enum"); break; default: printf_filtered ("(Internal error in gdb)"); break; } printf_filtered (" %s. Type \"help ptype\".\n", typename); type = SYMBOL_TYPE (sym); } } type_print (type, "", stdout, 1); printf_filtered ("\n"); } #if 0 /* This is not necessary. Instead, decode_line_1 takes any variable, so "info line foo" is a close equivalent to "whereis foo". */ static void whereis_command (var, from_tty) char *var; int from_tty; { struct symtab *s; struct symbol *sym; if (var == NULL) error_no_arg ("Variable name."); sym = lookup_symbol (var, get_selected_block (), VAR_NAMESPACE, NULL, &s); if (sym != NULL && s != NULL) printf_filtered ("Symbol \"%s\" is at line %d of file %s\n", var, sym->line, s->filename); else { if (lookup_misc_func (var) >= 0) printf_filtered ("Symbol \"%s\" is in a file compiled without -g.", var); else error ("No symbol \"%s\" in current context.", var); } } #endif /* 0 */ enum display_status {disabled, enabled}; struct display { /* Chain link to next auto-display item. */ struct display *next; /* Expression to be evaluated and displayed. */ struct expression *exp; /* Item number of this auto-display item. */ int number; /* Display format specified. */ struct format_data format; /* Innermost block required by this expression when evaluated */ struct block *block; /* Status of this display (enabled or disabled) */ enum display_status status; }; /* Chain of expressions whose values should be displayed automatically each time the program stops. */ static struct display *display_chain; static int display_number; /* Add an expression to the auto-display chain. Specify the expression. */ static void display_command (exp, from_tty) char *exp; int from_tty; { struct format_data fmt; register struct expression *expr; register struct display *new; if (exp == 0) { do_displays (); return; } if (*exp == '/') { exp++; fmt = decode_format (&exp, 0, 0); if (fmt.size && fmt.format == 0) fmt.format = 'x'; if (fmt.format == 'i' || fmt.format == 's') fmt.size = 'b'; } else { fmt.format = 0; fmt.size = 0; fmt.count = 0; } innermost_block = 0; expr = parse_c_expression (exp); new = (struct display *) xmalloc (sizeof (struct display)); new->exp = expr; new->block = innermost_block; new->next = display_chain; new->number = ++display_number; new->format = fmt; new->status = enabled; display_chain = new; if (from_tty && target_has_execution) do_one_display (new); dont_repeat (); } static void free_display (d) struct display *d; { free (d->exp); free (d); } /* Clear out the display_chain. Done when new symtabs are loaded, since this invalidates the types stored in many expressions. */ void clear_displays () { register struct display *d; while (d = display_chain) { free (d->exp); display_chain = d->next; free (d); } } /* Delete the auto-display number NUM. */ void delete_display (num) int num; { register struct display *d1, *d; if (!display_chain) error ("No display number %d.", num); if (display_chain->number == num) { d1 = display_chain; display_chain = d1->next; free_display (d1); } else for (d = display_chain; ; d = d->next) { if (d->next == 0) error ("No display number %d.", num); if (d->next->number == num) { d1 = d->next; d->next = d1->next; free_display (d1); break; } } } /* Delete some values from the auto-display chain. Specify the element numbers. */ static void undisplay_command (args) char *args; { register char *p = args; register char *p1; register int num; if (args == 0) { if (query ("Delete all auto-display expressions? ")) clear_displays (); dont_repeat (); return; } while (*p) { p1 = p; while (*p1 >= '0' && *p1 <= '9') p1++; if (*p1 && *p1 != ' ' && *p1 != '\t') error ("Arguments must be display numbers."); num = atoi (p); delete_display (num); p = p1; while (*p == ' ' || *p == '\t') p++; } dont_repeat (); } /* Display a single auto-display. Do nothing if the display cannot be printed in the current context, or if the display is disabled. */ static void do_one_display (d) struct display *d; { int within_current_scope; if (d->status == disabled) return; if (d->block) within_current_scope = contained_in (get_selected_block (), d->block); else within_current_scope = 1; if (!within_current_scope) return; current_display_number = d->number; printf_filtered ("%d: ", d->number); if (d->format.size) { CORE_ADDR addr; printf_filtered ("x/"); if (d->format.count != 1) printf_filtered ("%d", d->format.count); printf_filtered ("%c", d->format.format); if (d->format.format != 'i' && d->format.format != 's') printf_filtered ("%c", d->format.size); printf_filtered (" "); print_expression (d->exp, stdout); if (d->format.count != 1) printf_filtered ("\n"); else printf_filtered (" "); addr = value_as_pointer (evaluate_expression (d->exp)); if (d->format.format == 'i') addr = ADDR_BITS_REMOVE (addr); do_examine (d->format, addr); } else { if (d->format.format) printf_filtered ("/%c ", d->format.format); print_expression (d->exp, stdout); printf_filtered (" = "); print_formatted (evaluate_expression (d->exp), d->format.format, d->format.size); printf_filtered ("\n"); } fflush (stdout); current_display_number = -1; } /* Display all of the values on the auto-display chain which can be evaluated in the current scope. */ void do_displays () { register struct display *d; for (d = display_chain; d; d = d->next) do_one_display (d); } /* Delete the auto-display which we were in the process of displaying. This is done when there is an error or a signal. */ void disable_display (num) int num; { register struct display *d; for (d = display_chain; d; d = d->next) if (d->number == num) { d->status = disabled; return; } printf ("No display number %d.\n", num); } void disable_current_display () { if (current_display_number >= 0) { disable_display (current_display_number); fprintf (stderr, "Disabling display %d to avoid infinite recursion.\n", current_display_number); } current_display_number = -1; } static void display_info () { register struct display *d; if (!display_chain) printf ("There are no auto-display expressions now.\n"); else printf_filtered ("Auto-display expressions now in effect:\n\ Num Enb Expression\n"); for (d = display_chain; d; d = d->next) { printf_filtered ("%d: %c ", d->number, "ny"[(int)d->status]); if (d->format.size) printf_filtered ("/%d%c%c ", d->format.count, d->format.size, d->format.format); else if (d->format.format) printf_filtered ("/%c ", d->format.format); print_expression (d->exp, stdout); if (d->block && !contained_in (get_selected_block (), d->block)) printf_filtered (" (cannot be evaluated in the current context)"); printf_filtered ("\n"); fflush (stdout); } } void enable_display (args) char *args; { register char *p = args; register char *p1; register int num; register struct display *d; if (p == 0) { for (d = display_chain; d; d = d->next) d->status = enabled; } else while (*p) { p1 = p; while (*p1 >= '0' && *p1 <= '9') p1++; if (*p1 && *p1 != ' ' && *p1 != '\t') error ("Arguments must be display numbers."); num = atoi (p); for (d = display_chain; d; d = d->next) if (d->number == num) { d->status = enabled; goto win; } printf ("No display number %d.\n", num); win: p = p1; while (*p == ' ' || *p == '\t') p++; } } /* ARGSUSED */ void disable_display_command (args, from_tty) char *args; int from_tty; { register char *p = args; register char *p1; register struct display *d; if (p == 0) { for (d = display_chain; d; d = d->next) d->status = disabled; } else while (*p) { p1 = p; while (*p1 >= '0' && *p1 <= '9') p1++; if (*p1 && *p1 != ' ' && *p1 != '\t') error ("Arguments must be display numbers."); disable_display (atoi (p)); p = p1; while (*p == ' ' || *p == '\t') p++; } } /* Print the value in stack frame FRAME of a variable specified by a struct symbol. */ void print_variable_value (var, frame, stream) struct symbol *var; FRAME frame; FILE *stream; { value val = read_var_value (var, frame); value_print (val, stream, 0, Val_pretty_default); } /* Print the arguments of a stack frame, given the function FUNC running in that frame (as a symbol), the info on the frame, and the number of args according to the stack frame (or -1 if unknown). */ /* References here and elsewhere to "number of args according to the stack frame" appear in all cases to refer to "number of ints of args according to the stack frame". At least for VAX, i386, isi. */ void print_frame_args (func, fi, num, stream) struct symbol *func; struct frame_info *fi; int num; FILE *stream; { struct block *b; int nsyms = 0; int first = 1; register int i; register struct symbol *sym; register value val; /* Offset of next stack argument beyond the one we have seen that is at the highest offset. -1 if we haven't come to a stack argument yet. */ long highest_offset = -1; int arg_size; /* Number of ints of arguments that we have printed so far. */ int args_printed = 0; if (func) { b = SYMBOL_BLOCK_VALUE (func); nsyms = BLOCK_NSYMS (b); } for (i = 0; i < nsyms; i++) { QUIT; sym = BLOCK_SYM (b, i); if (SYMBOL_CLASS (sym) != LOC_REGPARM && SYMBOL_CLASS (sym) != LOC_ARG && SYMBOL_CLASS (sym) != LOC_LOCAL_ARG && SYMBOL_CLASS (sym) != LOC_REF_ARG) continue; /* We have to re-look-up the symbol because arguments often have two entries (one a parameter, one a register or local), and the one we want is the non-parm, which lookup_symbol will find for us. After this, sym could be any SYMBOL_CLASS... */ sym = lookup_symbol (SYMBOL_NAME (sym), b, VAR_NAMESPACE, (int *)NULL, (struct symtab **)NULL); switch (SYMBOL_CLASS (sym)) { /* Keep track of the highest stack argument offset seen */ case LOC_ARG: case LOC_REF_ARG: { long current_offset = SYMBOL_VALUE (sym); arg_size = TYPE_LENGTH (SYMBOL_TYPE (sym)); /* Compute address of next argument by adding the size of this argument and rounding to an int boundary. */ current_offset = ((current_offset + arg_size + sizeof (int) - 1) & ~(sizeof (int) - 1)); /* If this is the highest offset seen yet, set highest_offset. */ if (highest_offset == -1 || (current_offset > highest_offset)) highest_offset = current_offset; /* Add the number of ints we're about to print to args_printed. */ args_printed += (arg_size + sizeof (int) - 1) / sizeof (int); } /* Other types of symbols don't need to be kept track of. */ default: break; } /* Print the current arg. */ if (! first) fprintf_filtered (stream, ", "); wrap_here (" "); fprint_symbol (stream, SYMBOL_NAME (sym)); fputs_filtered ("=", stream); /* Avoid value_print because it will deref ref parameters. We just want to print their addresses. Print ??? for args whose address we do not know. */ val = read_var_value (sym, FRAME_INFO_ID (fi)); if (val) val_print (VALUE_TYPE (val), VALUE_CONTENTS (val), VALUE_ADDRESS (val), stream, 0, 0, 0, Val_no_prettyprint); else fputs_filtered ("???", stream); first = 0; } /* Don't print nameless args in situations where we don't know enough about the stack to find them. */ if (num != -1) { long start; CORE_ADDR addr; if (highest_offset == -1) start = FRAME_ARGS_SKIP; else start = highest_offset; addr = FRAME_ARGS_ADDRESS (fi); if (addr) print_frame_nameless_args (addr, start, num - args_printed, first, stream); } } /* Print nameless args on STREAM. ARGSADDR is the address of the arglist, START is the offset of the first nameless arg, and NUM is the number of nameless args to print. FIRST is nonzero if this is the first argument (not just the first nameless arg). */ static void print_frame_nameless_args (argsaddr, start, num, first, stream) CORE_ADDR argsaddr; long start; int num; int first; FILE *stream; { int i; for (i = 0; i < num; i++) { QUIT; if (!first) fprintf_filtered (stream, ", "); #ifndef PRINT_TYPELESS_INTEGER fprintf_filtered (stream, "%d", read_memory_integer (argsaddr + start, sizeof (int))); #else PRINT_TYPELESS_INTEGER (stream, builtin_type_int, (LONGEST) read_memory_integer (argsaddr + start, sizeof (int))); #endif first = 0; start += sizeof (int); } } /* ARGSUSED */ static void printf_command (arg, from_tty) char *arg; int from_tty; { register char *f; register char *s = arg; char *string; value *val_args; int nargs = 0; int allocated_args = 20; char *arg_bytes; val_args = (value *) xmalloc (allocated_args * sizeof (value)); if (s == 0) error_no_arg ("format-control string and values to print"); /* Skip white space before format string */ while (*s == ' ' || *s == '\t') s++; /* A format string should follow, enveloped in double quotes */ if (*s++ != '"') error ("Bad format string, missing '\"'."); /* Parse the format-control string and copy it into the string STRING, processing some kinds of escape sequence. */ f = string = (char *) alloca (strlen (s) + 1); while (*s != '"') { int c = *s++; switch (c) { case '\0': error ("Bad format string, non-terminated '\"'."); /* doesn't return */ case '\\': switch (c = *s++) { case '\\': *f++ = '\\'; break; case 'n': *f++ = '\n'; break; case 't': *f++ = '\t'; break; case 'r': *f++ = '\r'; break; case '"': *f++ = '"'; break; default: /* ??? TODO: handle other escape sequences */ error ("Unrecognized \\ escape character in format string."); } break; default: *f++ = c; } } /* Skip over " and following space and comma. */ s++; *f++ = '\0'; while (*s == ' ' || *s == '\t') s++; if (*s != ',' && *s != 0) error ("Invalid argument syntax"); if (*s == ',') s++; while (*s == ' ' || *s == '\t') s++; { /* Now scan the string for %-specs and see what kinds of args they want. argclass[I] classifies the %-specs so we can give vprintf something of the right size. */ enum argclass {int_arg, string_arg, double_arg, long_long_arg}; enum argclass *argclass; int nargs_wanted; int argindex; int lcount; int i; argclass = (enum argclass *) alloca (strlen (s) * sizeof *argclass); nargs_wanted = 0; f = string; while (*f) if (*f++ == '%') { lcount = 0; while (strchr ("0123456789.hlL-+ #", *f)) { if (*f == 'l' || *f == 'L') lcount++; f++; } if (*f == 's') argclass[nargs_wanted++] = string_arg; else if (*f == 'e' || *f == 'f' || *f == 'g') argclass[nargs_wanted++] = double_arg; else if (lcount > 1) argclass[nargs_wanted++] = long_long_arg; else if (*f != '%') argclass[nargs_wanted++] = int_arg; f++; } /* Now, parse all arguments and evaluate them. Store the VALUEs in VAL_ARGS. */ while (*s != '\0') { char *s1; if (nargs == allocated_args) val_args = (value *) xrealloc (val_args, (allocated_args *= 2) * sizeof (value)); s1 = s; val_args[nargs] = parse_to_comma_and_eval (&s1); /* If format string wants a float, unchecked-convert the value to floating point of the same size */ if (argclass[nargs] == double_arg) { if (TYPE_LENGTH (VALUE_TYPE (val_args[nargs])) == sizeof (float)) VALUE_TYPE (val_args[nargs]) = builtin_type_float; if (TYPE_LENGTH (VALUE_TYPE (val_args[nargs])) == sizeof (double)) VALUE_TYPE (val_args[nargs]) = builtin_type_double; } nargs++; s = s1; if (*s == ',') s++; } if (nargs != nargs_wanted) error ("Wrong number of arguments for specified format-string"); /* Now lay out an argument-list containing the arguments as doubles, integers and C pointers. */ arg_bytes = (char *) alloca (sizeof (double) * nargs); argindex = 0; for (i = 0; i < nargs; i++) { if (argclass[i] == string_arg) { char *str; CORE_ADDR tem; int j; tem = value_as_pointer (val_args[i]); /* This is a %s argument. Find the length of the string. */ for (j = 0; ; j++) { char c; QUIT; read_memory (tem + j, &c, 1); if (c == 0) break; } /* Copy the string contents into a string inside GDB. */ str = (char *) alloca (j + 1); read_memory (tem, str, j); str[j] = 0; /* Pass address of internal copy as the arg to vprintf. */ *((int *) &arg_bytes[argindex]) = (int) str; argindex += sizeof (int); } else if (VALUE_TYPE (val_args[i])->code == TYPE_CODE_FLT) { *((double *) &arg_bytes[argindex]) = value_as_double (val_args[i]); argindex += sizeof (double); } else #ifdef LONG_LONG if (argclass[i] == long_long_arg) { *(long long *) &arg_bytes[argindex] = value_as_long (val_args[i]); argindex += sizeof (long long); } else #endif { *((long *) &arg_bytes[argindex]) = value_as_long (val_args[i]); argindex += sizeof (long); } } } /* There is not a standard way to make a va_list, so we need to do various things for different systems. */ #if defined (__INT_VARARGS_H) { va_list list; list.__va_arg = 0; list.__va_stk = (int *) arg_bytes; list.__va_reg = (int *) arg_bytes; vprintf (string, list); } #else /* No __INT_VARARGS_H. */ vprintf (string, arg_bytes); #endif /* No __INT_VARARGS_H. */ } /* Helper function for asdump_command. Finds the bounds of a function for a specified section of text. PC is an address within the function which you want bounds for; *LOW and *HIGH are set to the beginning (inclusive) and end (exclusive) of the function. This function returns 1 on success and 0 on failure. */ static int containing_function_bounds (pc, low, high) CORE_ADDR pc, *low, *high; { int scan; if (!find_pc_partial_function (pc, 0, low)) return 0; scan = *low; do { scan++; if (!find_pc_partial_function (scan, 0, high)) return 0; } while (*low == *high); return 1; } /* Dump a specified section of assembly code. With no command line arguments, this command will dump the assembly code for the function surrounding the pc value in the selected frame. With one argument, it will dump the assembly code surrounding that pc value. Two arguments are interpeted as bounds within which to dump assembly. */ /* ARGSUSED */ static void disassemble_command (arg, from_tty) char *arg; int from_tty; { CORE_ADDR low, high; CORE_ADDR pc; char *space_index; if (!arg) { if (!selected_frame) error ("No frame selected.\n"); pc = get_frame_pc (selected_frame); if (!containing_function_bounds (pc, &low, &high)) error ("No function contains pc specified by selected frame.\n"); } else if (!(space_index = (char *) strchr (arg, ' '))) { /* One argument. */ pc = parse_and_eval_address (arg); if (!containing_function_bounds (pc, &low, &high)) error ("No function contains specified pc.\n"); } else { /* Two arguments. */ *space_index = '\0'; low = parse_and_eval_address (arg); high = parse_and_eval_address (space_index + 1); } printf_filtered ("Dump of assembler code "); if (!space_index) { char *name; find_pc_partial_function (pc, &name, 0); printf_filtered ("for function %s:\n", name); } else printf_filtered ("from 0x%x to 0x%x:\n", low, high); /* Dump the specified range. */ for (pc = low; pc < high; ) { QUIT; print_address (pc, stdout); printf_filtered (":\t"); pc += print_insn (pc, stdout); printf_filtered ("\n"); } printf_filtered ("End of assembler dump.\n"); fflush (stdout); } void _initialize_printcmd () { current_display_number = -1; add_info ("address", address_info, "Describe where variable VAR is stored."); add_com ("x", class_vars, x_command, "Examine memory: x/FMT ADDRESS.\n\ ADDRESS is an expression for the memory address to examine.\n\ FMT is a repeat count followed by a format letter and a size letter.\n\ Format letters are o(octal), x(hex), d(decimal), u(unsigned decimal),\n\ f(float), a(address), i(instruction), c(char) and s(string).\n\ Size letters are b(byte), h(halfword), w(word), g(giant, 8 bytes).\n\ g is meaningful only with f, for type double.\n\ The specified number of objects of the specified size are printed\n\ according to the format.\n\n\ Defaults for format and size letters are those previously used.\n\ Default count is 1. Default address is following last thing printed\n\ with this command or \"print\"."); add_com ("disassemble", class_vars, disassemble_command, "Disassemble a specified section of memory.\n\ Default is the function surrounding the pc of the selected frame.\n\ With a single argument, the function surrounding that address is dumped.\n\ Two arguments are taken as a range of memory to dump."); add_com ("ptype", class_vars, ptype_command, "Print definition of type TYPE.\n\ Argument may be a type name defined by typedef, or \"struct STRUCTNAME\"\n\ or \"union UNIONNAME\" or \"enum ENUMNAME\".\n\ The selected stack frame's lexical context is used to look up the name."); add_com ("whatis", class_vars, whatis_command, "Print data type of expression EXP."); #if 0 add_com ("whereis", class_vars, whereis_command, "Print line number and file of definition of variable."); #endif add_info ("display", display_info, "Expressions to display when program stops, with code numbers."); add_cmd ("undisplay", class_vars, undisplay_command, "Cancel some expressions to be displayed when program stops.\n\ Arguments are the code numbers of the expressions to stop displaying.\n\ No argument means cancel all automatic-display expressions.\n\ \"delete display\" has the same effect as this command.\n\ Do \"info display\" to see current list of code numbers.", &cmdlist); add_com ("display", class_vars, display_command, "Print value of expression EXP each time the program stops.\n\ /FMT may be used before EXP as in the \"print\" command.\n\ /FMT \"i\" or \"s\" or including a size-letter is allowed,\n\ as in the \"x\" command, and then EXP is used to get the address to examine\n\ and examining is done as in the \"x\" command.\n\n\ With no argument, display all currently requested auto-display expressions.\n\ Use \"undisplay\" to cancel display requests previously made."); add_cmd ("display", class_vars, enable_display, "Enable some expressions to be displayed when program stops.\n\ Arguments are the code numbers of the expressions to resume displaying.\n\ No argument means enable all automatic-display expressions.\n\ Do \"info display\" to see current list of code numbers.", &enablelist); add_cmd ("display", class_vars, disable_display_command, "Disable some expressions to be displayed when program stops.\n\ Arguments are the code numbers of the expressions to stop displaying.\n\ No argument means disable all automatic-display expressions.\n\ Do \"info display\" to see current list of code numbers.", &disablelist); add_cmd ("display", class_vars, undisplay_command, "Cancel some expressions to be displayed when program stops.\n\ Arguments are the code numbers of the expressions to stop displaying.\n\ No argument means cancel all automatic-display expressions.\n\ Do \"info display\" to see current list of code numbers.", &deletelist); add_com ("printf", class_vars, printf_command, "printf \"printf format string\", arg1, arg2, arg3, ..., argn\n\ This is useful for formatted output in user-defined commands."); add_com ("output", class_vars, output_command, "Like \"print\" but don't put in value history and don't print newline.\n\ This is useful in user-defined commands."); add_prefix_cmd ("set", class_vars, set_command, "Perform an assignment VAR = EXP.\n\ You must type the \"=\". VAR may be a debugger \"convenience\" variable\n\ (names starting with $), a register (a few standard names starting with $),\n\ or an actual variable in the program being debugged. EXP is any expression.\n\ Use \"set variable\" for variables with names identical to set subcommands.\n\ \nWith a subcommand, this command modifies parts of the gdb environment.\n\ You can see these environment settings with the \"show\" command.", &setlist, "set ", 1, &cmdlist); /* "call" is the same as "set", but handy for dbx users to call fns. */ add_com ("call", class_vars, call_command, "Call a function in the inferior process.\n\ The argument is the function name and arguments, in standard C notation.\n\ The result is printed and saved in the value history, if it is not void."); add_cmd ("variable", class_vars, set_command, "Perform an assignment VAR = EXP.\n\ You must type the \"=\". VAR may be a debugger \"convenience\" variable\n\ (names starting with $), a register (a few standard names starting with $),\n\ or an actual variable in the program being debugged. EXP is any expression.\n\ This may usually be abbreviated to simply \"set\".", &setlist); add_com ("print", class_vars, print_command, concat ("Print value of expression EXP.\n\ Variables accessible are those of the lexical environment of the selected\n\ stack frame, plus all those whose scope is global or an entire file.\n\ \n\ $NUM gets previous value number NUM. $ and $$ are the last two values.\n\ $$NUM refers to NUM'th value back from the last one.\n\ Names starting with $ refer to registers (with the values they would have\n\ if the program were to return to the stack frame now selected, restoring\n\ all registers saved by frames farther in) or else to debugger\n\ \"convenience\" variables (any such name not a known register).\n\ Use assignment expressions to give values to convenience variables.\n", "\n\ {TYPE}ADREXP refers to a datum of data type TYPE, located at address ADREXP.\n\ @ is a binary operator for treating consecutive data objects\n\ anywhere in memory as an array. FOO@NUM gives an array whose first\n\ element is FOO, whose second element is stored in the space following\n\ where FOO is stored, etc. FOO must be an expression whose value\n\ resides in memory.\n", "\n\ EXP may be preceded with /FMT, where FMT is a format letter\n\ but no count or size letter (see \"x\" command).")); add_com_alias ("p", "print", class_vars, 1); add_com ("inspect", class_vars, inspect_command, "Same as \"print\" command, except that if you are running in the epoch\n\ environment, the value is printed in its own window."); }