/* Remote debugging interface for boot monitors, for GDB. Copyright 1990-1993, 1995-1997, 1999-2000 Free Software Foundation, Inc. Contributed by Cygnus Support. Written by Rob Savoye for Cygnus. Resurrected from the ashes by Stu Grossman. This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* This file was derived from various remote-* modules. It is a collection of generic support functions so GDB can talk directly to a ROM based monitor. This saves use from having to hack an exception based handler into existance, and makes for quick porting. This module talks to a debug monitor called 'MONITOR', which We communicate with MONITOR via either a direct serial line, or a TCP (or possibly TELNET) stream to a terminal multiplexor, which in turn talks to the target board. */ /* FIXME 32x64: This code assumes that registers and addresses are at most 32 bits long. If they can be larger, you will need to declare values as LONGEST and use %llx or some such to print values when building commands to send to the monitor. Since we don't know of any actual 64-bit targets with ROM monitors that use this code, it's not an issue right now. -sts 4/18/96 */ #include "defs.h" #include "gdbcore.h" #include "target.h" #include "gdb_wait.h" #include #include #include "gdb_string.h" #include #include "command.h" #include "serial.h" #include "monitor.h" #include "gdbcmd.h" #include "inferior.h" #include "gnu-regex.h" #include "dcache.h" #include "srec.h" static char *dev_name; static struct target_ops *targ_ops; static void monitor_vsprintf PARAMS ((char *sndbuf, char *pattern, va_list args)); static int readchar PARAMS ((int timeout)); static void monitor_fetch_register PARAMS ((int regno)); static void monitor_store_register PARAMS ((int regno)); static void monitor_printable_string (char *newstr, char *oldstr, int len); static void monitor_error (char *function, char *message, CORE_ADDR memaddr, int len, char *string, int final_char); static void monitor_detach PARAMS ((char *args, int from_tty)); static void monitor_resume PARAMS ((int pid, int step, enum target_signal sig)); static void monitor_interrupt PARAMS ((int signo)); static void monitor_interrupt_twice PARAMS ((int signo)); static void monitor_interrupt_query PARAMS ((void)); static void monitor_wait_cleanup PARAMS ((void *old_timeout)); static int monitor_wait PARAMS ((int pid, struct target_waitstatus * status)); static void monitor_fetch_registers PARAMS ((int regno)); static void monitor_store_registers PARAMS ((int regno)); static void monitor_prepare_to_store PARAMS ((void)); static int monitor_xfer_memory PARAMS ((CORE_ADDR memaddr, char *myaddr, int len, int write, struct target_ops * target)); static void monitor_files_info PARAMS ((struct target_ops * ops)); static int monitor_insert_breakpoint PARAMS ((CORE_ADDR addr, char *shadow)); static int monitor_remove_breakpoint PARAMS ((CORE_ADDR addr, char *shadow)); static void monitor_kill PARAMS ((void)); static void monitor_load PARAMS ((char *file, int from_tty)); static void monitor_mourn_inferior PARAMS ((void)); static void monitor_stop PARAMS ((void)); static int monitor_read_memory PARAMS ((CORE_ADDR addr, char *myaddr, int len)); static int monitor_write_memory PARAMS ((CORE_ADDR addr, char *myaddr, int len)); static int monitor_write_memory_bytes PARAMS ((CORE_ADDR addr, char *myaddr, int len)); static int monitor_write_memory_block PARAMS (( CORE_ADDR memaddr, char *myaddr, int len)); static int monitor_expect_regexp PARAMS ((struct re_pattern_buffer * pat, char *buf, int buflen)); static void monitor_dump_regs PARAMS ((void)); #if 0 static int from_hex PARAMS ((int a)); static unsigned long get_hex_word PARAMS ((void)); #endif static void parse_register_dump PARAMS ((char *, int)); static struct monitor_ops *current_monitor; static int hashmark; /* flag set by "set hash" */ static int timeout = 30; static int in_monitor_wait = 0; /* Non-zero means we are in monitor_wait() */ static void (*ofunc) (); /* Old SIGINT signal handler */ static CORE_ADDR *breakaddr; /* Descriptor for I/O to remote machine. Initialize it to NULL so that monitor_open knows that we don't have a file open when the program starts. */ static serial_t monitor_desc = NULL; /* Pointer to regexp pattern matching data */ static struct re_pattern_buffer register_pattern; static char register_fastmap[256]; static struct re_pattern_buffer getmem_resp_delim_pattern; static char getmem_resp_delim_fastmap[256]; static int dump_reg_flag; /* Non-zero means do a dump_registers cmd when monitor_wait wakes up. */ static DCACHE *remote_dcache; static int first_time = 0; /* is this the first time we're executing after gaving created the child proccess? */ #define TARGET_BUF_SIZE 2048 /* Monitor specific debugging information. Typically only useful to the developer of a new monitor interface. */ static void monitor_debug (const char *fmt, ...) ATTR_FORMAT(printf, 1, 2); static int monitor_debug_p = 0; /* NOTE: This file alternates between monitor_debug_p and remote_debug when determining if debug information is printed. Perhaphs this could be simplified. */ static void monitor_debug (const char *fmt, ...) { if (monitor_debug_p) { va_list args; va_start (args, fmt); vfprintf_filtered (gdb_stdlog, fmt, args); va_end (args); } } /* Convert a string into a printable representation, Return # byte in the new string. When LEN is >0 it specifies the size of the string. Otherwize strlen(oldstr) is used. */ static void monitor_printable_string (char *newstr, char *oldstr, int len) { int ch; int i; if (len <= 0) len = strlen (oldstr); for (i = 0; i < len; i++) { ch = oldstr[i]; switch (ch) { default: if (isprint (ch)) *newstr++ = ch; else { sprintf (newstr, "\\x%02x", ch & 0xff); newstr += 4; } break; case '\\': *newstr++ = '\\'; *newstr++ = '\\'; break; case '\b': *newstr++ = '\\'; *newstr++ = 'b'; break; case '\f': *newstr++ = '\\'; *newstr++ = 't'; break; case '\n': *newstr++ = '\\'; *newstr++ = 'n'; break; case '\r': *newstr++ = '\\'; *newstr++ = 'r'; break; case '\t': *newstr++ = '\\'; *newstr++ = 't'; break; case '\v': *newstr++ = '\\'; *newstr++ = 'v'; break; } } *newstr++ = '\0'; } /* Print monitor errors with a string, converting the string to printable representation. */ static void monitor_error (char *function, char *message, CORE_ADDR memaddr, int len, char *string, int final_char) { int real_len = (len == 0 && string != (char *) 0) ? strlen (string) : len; char *safe_string = alloca ((real_len * 4) + 1); monitor_printable_string (safe_string, string, real_len); if (final_char) error ("%s (0x%s): %s: %s%c", function, paddr_nz (memaddr), message, safe_string, final_char); else error ("%s (0x%s): %s: %s", function, paddr_nz (memaddr), message, safe_string); } /* Convert hex digit A to a number. */ static int fromhex (a) int a; { if (a >= '0' && a <= '9') return a - '0'; else if (a >= 'a' && a <= 'f') return a - 'a' + 10; else if (a >= 'A' && a <= 'F') return a - 'A' + 10; else error ("Invalid hex digit %d", a); } /* monitor_vsprintf - similar to vsprintf but handles 64-bit addresses This function exists to get around the problem that many host platforms don't have a printf that can print 64-bit addresses. The %A format specification is recognized as a special case, and causes the argument to be printed as a 64-bit hexadecimal address. Only format specifiers of the form "[0-9]*[a-z]" are recognized. If it is a '%s' format, the argument is a string; otherwise the argument is assumed to be a long integer. %% is also turned into a single %. */ static void monitor_vsprintf (sndbuf, pattern, args) char *sndbuf; char *pattern; va_list args; { char format[10]; char fmt; char *p; int i; long arg_int; CORE_ADDR arg_addr; char *arg_string; for (p = pattern; *p; p++) { if (*p == '%') { /* Copy the format specifier to a separate buffer. */ format[0] = *p++; for (i = 1; *p >= '0' && *p <= '9' && i < (int) sizeof (format) - 2; i++, p++) format[i] = *p; format[i] = fmt = *p; format[i + 1] = '\0'; /* Fetch the next argument and print it. */ switch (fmt) { case '%': strcpy (sndbuf, "%"); break; case 'A': arg_addr = va_arg (args, CORE_ADDR); strcpy (sndbuf, paddr_nz (arg_addr)); break; case 's': arg_string = va_arg (args, char *); sprintf (sndbuf, format, arg_string); break; default: arg_int = va_arg (args, long); sprintf (sndbuf, format, arg_int); break; } sndbuf += strlen (sndbuf); } else *sndbuf++ = *p; } *sndbuf = '\0'; } /* monitor_printf_noecho -- Send data to monitor, but don't expect an echo. Works just like printf. */ void monitor_printf_noecho (char *pattern,...) { va_list args; char sndbuf[2000]; int len; va_start (args, pattern); monitor_vsprintf (sndbuf, pattern, args); len = strlen (sndbuf); if (len + 1 > sizeof sndbuf) abort (); if (monitor_debug_p) { char *safe_string = (char *) alloca ((strlen (sndbuf) * 4) + 1); monitor_printable_string (safe_string, sndbuf, 0); fprintf_unfiltered (gdb_stdlog, "sent[%s]\n", safe_string); } monitor_write (sndbuf, len); } /* monitor_printf -- Send data to monitor and check the echo. Works just like printf. */ void monitor_printf (char *pattern,...) { va_list args; char sndbuf[2000]; int len; va_start (args, pattern); monitor_vsprintf (sndbuf, pattern, args); len = strlen (sndbuf); if (len + 1 > sizeof sndbuf) abort (); if (monitor_debug_p) { char *safe_string = (char *) alloca ((len * 4) + 1); monitor_printable_string (safe_string, sndbuf, 0); fprintf_unfiltered (gdb_stdlog, "sent[%s]\n", safe_string); } monitor_write (sndbuf, len); /* We used to expect that the next immediate output was the characters we just output, but sometimes some extra junk appeared before the characters we expected, like an extra prompt, or a portmaster sending telnet negotiations. So, just start searching for what we sent, and skip anything unknown. */ monitor_debug ("ExpectEcho\n"); monitor_expect (sndbuf, (char *) 0, 0); } /* Write characters to the remote system. */ void monitor_write (buf, buflen) char *buf; int buflen; { if (SERIAL_WRITE (monitor_desc, buf, buflen)) fprintf_unfiltered (gdb_stderr, "SERIAL_WRITE failed: %s\n", safe_strerror (errno)); } /* Read a binary character from the remote system, doing all the fancy timeout stuff, but without interpreting the character in any way, and without printing remote debug information. */ int monitor_readchar () { int c; int looping; do { looping = 0; c = SERIAL_READCHAR (monitor_desc, timeout); if (c >= 0) c &= 0xff; /* don't lose bit 7 */ } while (looping); if (c >= 0) return c; if (c == SERIAL_TIMEOUT) error ("Timeout reading from remote system."); perror_with_name ("remote-monitor"); } /* Read a character from the remote system, doing all the fancy timeout stuff. */ static int readchar (timeout) int timeout; { int c; static enum { last_random, last_nl, last_cr, last_crnl } state = last_random; int looping; do { looping = 0; c = SERIAL_READCHAR (monitor_desc, timeout); if (c >= 0) { c &= 0x7f; /* This seems to interfere with proper function of the input stream */ if (monitor_debug_p || remote_debug) { char buf[2]; buf[0] = c; buf[1] = '\0'; puts_debug ("read -->", buf, "<--"); } } /* Canonicialize \n\r combinations into one \r */ if ((current_monitor->flags & MO_HANDLE_NL) != 0) { if ((c == '\r' && state == last_nl) || (c == '\n' && state == last_cr)) { state = last_crnl; looping = 1; } else if (c == '\r') state = last_cr; else if (c != '\n') state = last_random; else { state = last_nl; c = '\r'; } } } while (looping); if (c >= 0) return c; if (c == SERIAL_TIMEOUT) #if 0 /* I fail to see how detaching here can be useful */ if (in_monitor_wait) /* Watchdog went off */ { target_mourn_inferior (); error ("GDB serial timeout has expired. Target detached.\n"); } else #endif error ("Timeout reading from remote system."); perror_with_name ("remote-monitor"); } /* Scan input from the remote system, until STRING is found. If BUF is non- zero, then collect input until we have collected either STRING or BUFLEN-1 chars. In either case we terminate BUF with a 0. If input overflows BUF because STRING can't be found, return -1, else return number of chars in BUF (minus the terminating NUL). Note that in the non-overflow case, STRING will be at the end of BUF. */ int monitor_expect (string, buf, buflen) char *string; char *buf; int buflen; { char *p = string; int obuflen = buflen; int c; extern struct target_ops *targ_ops; if (monitor_debug_p) { char *safe_string = (char *) alloca ((strlen (string) * 4) + 1); monitor_printable_string (safe_string, string, 0); fprintf_unfiltered (gdb_stdlog, "MON Expecting '%s'\n", safe_string); } immediate_quit = 1; while (1) { if (buf) { if (buflen < 2) { *buf = '\000'; immediate_quit = 0; return -1; } c = readchar (timeout); if (c == '\000') continue; *buf++ = c; buflen--; } else c = readchar (timeout); /* Don't expect any ^C sent to be echoed */ if (*p == '\003' || c == *p) { p++; if (*p == '\0') { immediate_quit = 0; if (buf) { *buf++ = '\000'; return obuflen - buflen; } else return 0; } } else if ((c == '\021' || c == '\023') && (STREQ (targ_ops->to_shortname, "m32r") || STREQ (targ_ops->to_shortname, "mon2000"))) { /* m32r monitor emits random DC1/DC3 chars */ continue; } else { /* We got a character that doesn't match the string. We need to back up p, but how far? If we're looking for "..howdy" and the monitor sends "...howdy"? There's certainly a match in there, but when we receive the third ".", we won't find it if we just restart the matching at the beginning of the string. This is a Boyer-Moore kind of situation. We want to reset P to the end of the longest prefix of STRING that is a suffix of what we've read so far. In the example above, that would be ".." --- the longest prefix of "..howdy" that is a suffix of "...". This longest prefix could be the empty string, if C is nowhere to be found in STRING. If this longest prefix is not the empty string, it must contain C, so let's search from the end of STRING for instances of C, and see if the portion of STRING before that is a suffix of what we read before C. Actually, we can search backwards from p, since we know no prefix can be longer than that. Note that we can use STRING itself, along with C, as a record of what we've received so far. :) */ int i; for (i = (p - string) - 1; i >= 0; i--) if (string[i] == c) { /* Is this prefix a suffix of what we've read so far? In other words, does string[0 .. i-1] == string[p - i, p - 1]? */ if (! memcmp (string, p - i, i)) { p = string + i + 1; break; } } if (i < 0) p = string; } } } /* Search for a regexp. */ static int monitor_expect_regexp (pat, buf, buflen) struct re_pattern_buffer *pat; char *buf; int buflen; { char *mybuf; char *p; monitor_debug ("MON Expecting regexp\n"); if (buf) mybuf = buf; else { mybuf = alloca (TARGET_BUF_SIZE); buflen = TARGET_BUF_SIZE; } p = mybuf; while (1) { int retval; if (p - mybuf >= buflen) { /* Buffer about to overflow */ /* On overflow, we copy the upper half of the buffer to the lower half. Not great, but it usually works... */ memcpy (mybuf, mybuf + buflen / 2, buflen / 2); p = mybuf + buflen / 2; } *p++ = readchar (timeout); retval = re_search (pat, mybuf, p - mybuf, 0, p - mybuf, NULL); if (retval >= 0) return 1; } } /* Keep discarding input until we see the MONITOR prompt. The convention for dealing with the prompt is that you o give your command o *then* wait for the prompt. Thus the last thing that a procedure does with the serial line will be an monitor_expect_prompt(). Exception: monitor_resume does not wait for the prompt, because the terminal is being handed over to the inferior. However, the next thing which happens after that is a monitor_wait which does wait for the prompt. Note that this includes abnormal exit, e.g. error(). This is necessary to prevent getting into states from which we can't recover. */ int monitor_expect_prompt (buf, buflen) char *buf; int buflen; { monitor_debug ("MON Expecting prompt\n"); return monitor_expect (current_monitor->prompt, buf, buflen); } /* Get N 32-bit words from remote, each preceded by a space, and put them in registers starting at REGNO. */ #if 0 static unsigned long get_hex_word () { unsigned long val; int i; int ch; do ch = readchar (timeout); while (isspace (ch)); val = from_hex (ch); for (i = 7; i >= 1; i--) { ch = readchar (timeout); if (!isxdigit (ch)) break; val = (val << 4) | from_hex (ch); } return val; } #endif static void compile_pattern (pattern, compiled_pattern, fastmap) char *pattern; struct re_pattern_buffer *compiled_pattern; char *fastmap; { int tmp; const char *val; compiled_pattern->fastmap = fastmap; tmp = re_set_syntax (RE_SYNTAX_EMACS); val = re_compile_pattern (pattern, strlen (pattern), compiled_pattern); re_set_syntax (tmp); if (val) error ("compile_pattern: Can't compile pattern string `%s': %s!", pattern, val); if (fastmap) re_compile_fastmap (compiled_pattern); } /* Open a connection to a remote debugger. NAME is the filename used for communication. */ void monitor_open (args, mon_ops, from_tty) char *args; struct monitor_ops *mon_ops; int from_tty; { char *name; char **p; if (mon_ops->magic != MONITOR_OPS_MAGIC) error ("Magic number of monitor_ops struct wrong."); targ_ops = mon_ops->target; name = targ_ops->to_shortname; if (!args) error ("Use `target %s DEVICE-NAME' to use a serial port, or \n\ `target %s HOST-NAME:PORT-NUMBER' to use a network connection.", name, name); target_preopen (from_tty); /* Setup pattern for register dump */ if (mon_ops->register_pattern) compile_pattern (mon_ops->register_pattern, ®ister_pattern, register_fastmap); if (mon_ops->getmem.resp_delim) compile_pattern (mon_ops->getmem.resp_delim, &getmem_resp_delim_pattern, getmem_resp_delim_fastmap); unpush_target (targ_ops); if (dev_name) free (dev_name); dev_name = strsave (args); monitor_desc = SERIAL_OPEN (dev_name); if (!monitor_desc) perror_with_name (dev_name); if (baud_rate != -1) { if (SERIAL_SETBAUDRATE (monitor_desc, baud_rate)) { SERIAL_CLOSE (monitor_desc); perror_with_name (dev_name); } } SERIAL_RAW (monitor_desc); SERIAL_FLUSH_INPUT (monitor_desc); /* some systems only work with 2 stop bits */ SERIAL_SETSTOPBITS (monitor_desc, mon_ops->stopbits); current_monitor = mon_ops; /* See if we can wake up the monitor. First, try sending a stop sequence, then send the init strings. Last, remove all breakpoints. */ if (current_monitor->stop) { monitor_stop (); if ((current_monitor->flags & MO_NO_ECHO_ON_OPEN) == 0) { monitor_debug ("EXP Open echo\n"); monitor_expect_prompt (NULL, 0); } } /* wake up the monitor and see if it's alive */ for (p = mon_ops->init; *p != NULL; p++) { /* Some of the characters we send may not be echoed, but we hope to get a prompt at the end of it all. */ if ((current_monitor->flags & MO_NO_ECHO_ON_OPEN) == 0) monitor_printf (*p); else monitor_printf_noecho (*p); monitor_expect_prompt (NULL, 0); } SERIAL_FLUSH_INPUT (monitor_desc); /* Alloc breakpoints */ if (mon_ops->set_break != NULL) { if (mon_ops->num_breakpoints == 0) mon_ops->num_breakpoints = 8; breakaddr = (CORE_ADDR *) xmalloc (mon_ops->num_breakpoints * sizeof (CORE_ADDR)); memset (breakaddr, 0, mon_ops->num_breakpoints * sizeof (CORE_ADDR)); } /* Remove all breakpoints */ if (mon_ops->clr_all_break) { monitor_printf (mon_ops->clr_all_break); monitor_expect_prompt (NULL, 0); } if (from_tty) printf_unfiltered ("Remote target %s connected to %s\n", name, dev_name); push_target (targ_ops); inferior_pid = 42000; /* Make run command think we are busy... */ /* Give monitor_wait something to read */ monitor_printf (current_monitor->line_term); if (current_monitor->flags & MO_HAS_BLOCKWRITES) remote_dcache = dcache_init (monitor_read_memory, monitor_write_memory_block); else remote_dcache = dcache_init (monitor_read_memory, monitor_write_memory); start_remote (); } /* Close out all files and local state before this target loses control. */ void monitor_close (quitting) int quitting; { if (monitor_desc) SERIAL_CLOSE (monitor_desc); /* Free breakpoint memory */ if (breakaddr != NULL) { free (breakaddr); breakaddr = NULL; } monitor_desc = NULL; } /* Terminate the open connection to the remote debugger. Use this when you want to detach and do something else with your gdb. */ static void monitor_detach (args, from_tty) char *args; int from_tty; { pop_target (); /* calls monitor_close to do the real work */ if (from_tty) printf_unfiltered ("Ending remote %s debugging\n", target_shortname); } /* Convert VALSTR into the target byte-ordered value of REGNO and store it. */ char * monitor_supply_register (regno, valstr) int regno; char *valstr; { ULONGEST val; unsigned char regbuf[MAX_REGISTER_RAW_SIZE]; char *p; val = 0; p = valstr; while (p && *p != '\0') { if (*p == '\r' || *p == '\n') { while (*p != '\0') p++; break; } if (isspace (*p)) { p++; continue; } if (!isxdigit (*p) && *p != 'x') { break; } val <<= 4; val += fromhex (*p++); } monitor_debug ("Supplying Register %d %s\n", regno, valstr); if (*p != '\0') error ("monitor_supply_register (%d): bad value from monitor: %s.", regno, valstr); /* supply register stores in target byte order, so swap here */ store_unsigned_integer (regbuf, REGISTER_RAW_SIZE (regno), val); supply_register (regno, regbuf); return p; } /* Tell the remote machine to resume. */ void flush_monitor_dcache () { dcache_flush (remote_dcache); } static void monitor_resume (pid, step, sig) int pid, step; enum target_signal sig; { /* Some monitors require a different command when starting a program */ monitor_debug ("MON resume\n"); if (current_monitor->flags & MO_RUN_FIRST_TIME && first_time == 1) { first_time = 0; monitor_printf ("run\r"); if (current_monitor->flags & MO_NEED_REGDUMP_AFTER_CONT) dump_reg_flag = 1; return; } dcache_flush (remote_dcache); if (step) monitor_printf (current_monitor->step); else { if (current_monitor->continue_hook) (*current_monitor->continue_hook) (); else monitor_printf (current_monitor->cont); if (current_monitor->flags & MO_NEED_REGDUMP_AFTER_CONT) dump_reg_flag = 1; } } /* Parse the output of a register dump command. A monitor specific regexp is used to extract individual register descriptions of the form REG=VAL. Each description is split up into a name and a value string which are passed down to monitor specific code. */ static void parse_register_dump (buf, len) char *buf; int len; { monitor_debug ("MON Parsing register dump\n"); while (1) { int regnamelen, vallen; char *regname, *val; /* Element 0 points to start of register name, and element 1 points to the start of the register value. */ struct re_registers register_strings; memset (®ister_strings, 0, sizeof (struct re_registers)); if (re_search (®ister_pattern, buf, len, 0, len, ®ister_strings) == -1) break; regnamelen = register_strings.end[1] - register_strings.start[1]; regname = buf + register_strings.start[1]; vallen = register_strings.end[2] - register_strings.start[2]; val = buf + register_strings.start[2]; current_monitor->supply_register (regname, regnamelen, val, vallen); buf += register_strings.end[0]; len -= register_strings.end[0]; } } /* Send ^C to target to halt it. Target will respond, and send us a packet. */ static void monitor_interrupt (signo) int signo; { /* If this doesn't work, try more severe steps. */ signal (signo, monitor_interrupt_twice); if (monitor_debug_p || remote_debug) fprintf_unfiltered (gdb_stdlog, "monitor_interrupt called\n"); target_stop (); } /* The user typed ^C twice. */ static void monitor_interrupt_twice (signo) int signo; { signal (signo, ofunc); monitor_interrupt_query (); signal (signo, monitor_interrupt); } /* Ask the user what to do when an interrupt is received. */ static void monitor_interrupt_query () { target_terminal_ours (); if (query ("Interrupted while waiting for the program.\n\ Give up (and stop debugging it)? ")) { target_mourn_inferior (); return_to_top_level (RETURN_QUIT); } target_terminal_inferior (); } static void monitor_wait_cleanup (old_timeout) void *old_timeout; { timeout = *(int *) old_timeout; signal (SIGINT, ofunc); in_monitor_wait = 0; } void monitor_wait_filter (char *buf, int bufmax, int *ext_resp_len, struct target_waitstatus *status ) { int resp_len; do { resp_len = monitor_expect_prompt (buf, bufmax); *ext_resp_len = resp_len; if (resp_len <= 0) fprintf_unfiltered (gdb_stderr, "monitor_wait: excessive response from monitor: %s.", buf); } while (resp_len < 0); /* Print any output characters that were preceded by ^O. */ /* FIXME - This would be great as a user settabgle flag */ if (monitor_debug_p || remote_debug || current_monitor->flags & MO_PRINT_PROGRAM_OUTPUT) { int i; for (i = 0; i < resp_len - 1; i++) if (buf[i] == 0x0f) putchar_unfiltered (buf[++i]); } } /* Wait until the remote machine stops, then return, storing status in status just as `wait' would. */ static int monitor_wait (pid, status) int pid; struct target_waitstatus *status; { int old_timeout = timeout; char buf[TARGET_BUF_SIZE]; int resp_len; struct cleanup *old_chain; status->kind = TARGET_WAITKIND_EXITED; status->value.integer = 0; old_chain = make_cleanup (monitor_wait_cleanup, &old_timeout); monitor_debug ("MON wait\n"); #if 0 /* This is somthing other than a maintenance command */ in_monitor_wait = 1; timeout = watchdog > 0 ? watchdog : -1; #else timeout = -1; /* Don't time out -- user program is running. */ #endif ofunc = (void (*)()) signal (SIGINT, monitor_interrupt); if (current_monitor->wait_filter) (*current_monitor->wait_filter) (buf, sizeof (buf), &resp_len, status); else monitor_wait_filter (buf, sizeof (buf), &resp_len, status); #if 0 /* Transferred to monitor wait filter */ do { resp_len = monitor_expect_prompt (buf, sizeof (buf)); if (resp_len <= 0) fprintf_unfiltered (gdb_stderr, "monitor_wait: excessive response from monitor: %s.", buf); } while (resp_len < 0); /* Print any output characters that were preceded by ^O. */ /* FIXME - This would be great as a user settabgle flag */ if (monitor_debug_p || remote_debug || current_monitor->flags & MO_PRINT_PROGRAM_OUTPUT) { int i; for (i = 0; i < resp_len - 1; i++) if (buf[i] == 0x0f) putchar_unfiltered (buf[++i]); } #endif signal (SIGINT, ofunc); timeout = old_timeout; #if 0 if (dump_reg_flag && current_monitor->dump_registers) { dump_reg_flag = 0; monitor_printf (current_monitor->dump_registers); resp_len = monitor_expect_prompt (buf, sizeof (buf)); } if (current_monitor->register_pattern) parse_register_dump (buf, resp_len); #else monitor_debug ("Wait fetching registers after stop\n"); monitor_dump_regs (); #endif status->kind = TARGET_WAITKIND_STOPPED; status->value.sig = TARGET_SIGNAL_TRAP; discard_cleanups (old_chain); in_monitor_wait = 0; return inferior_pid; } /* Fetch register REGNO, or all registers if REGNO is -1. Returns errno value. */ static void monitor_fetch_register (regno) int regno; { char *name; static char zerobuf[MAX_REGISTER_RAW_SIZE] = {0}; char regbuf[MAX_REGISTER_RAW_SIZE * 2 + 1]; int i; name = current_monitor->regnames[regno]; monitor_debug ("MON fetchreg %d '%s'\n", regno, name ? name : "(null name)"); if (!name || (*name == '\0')) { monitor_debug ("No register known for %d\n", regno); supply_register (regno, zerobuf); return; } /* send the register examine command */ monitor_printf (current_monitor->getreg.cmd, name); /* If RESP_DELIM is specified, we search for that as a leading delimiter for the register value. Otherwise, we just start searching from the start of the buf. */ if (current_monitor->getreg.resp_delim) { monitor_debug ("EXP getreg.resp_delim\n"); monitor_expect (current_monitor->getreg.resp_delim, NULL, 0); /* Handle case of first 32 registers listed in pairs. */ if (current_monitor->flags & MO_32_REGS_PAIRED && (regno & 1) != 0 && regno < 32) { monitor_debug ("EXP getreg.resp_delim\n"); monitor_expect (current_monitor->getreg.resp_delim, NULL, 0); } } /* Skip leading spaces and "0x" if MO_HEX_PREFIX flag is set */ if (current_monitor->flags & MO_HEX_PREFIX) { int c; c = readchar (timeout); while (c == ' ') c = readchar (timeout); if ((c == '0') && ((c = readchar (timeout)) == 'x')) ; else error ("Bad value returned from monitor while fetching register %x.", regno); } /* Read upto the maximum number of hex digits for this register, skipping spaces, but stop reading if something else is seen. Some monitors like to drop leading zeros. */ for (i = 0; i < REGISTER_RAW_SIZE (regno) * 2; i++) { int c; c = readchar (timeout); while (c == ' ') c = readchar (timeout); if (!isxdigit (c)) break; regbuf[i] = c; } regbuf[i] = '\000'; /* terminate the number */ monitor_debug ("REGVAL '%s'\n", regbuf); /* If TERM is present, we wait for that to show up. Also, (if TERM is present), we will send TERM_CMD if that is present. In any case, we collect all of the output into buf, and then wait for the normal prompt. */ if (current_monitor->getreg.term) { monitor_debug ("EXP getreg.term\n"); monitor_expect (current_monitor->getreg.term, NULL, 0); /* get response */ } if (current_monitor->getreg.term_cmd) { monitor_debug ("EMIT getreg.term.cmd\n"); monitor_printf (current_monitor->getreg.term_cmd); } if (!current_monitor->getreg.term || /* Already expected or */ current_monitor->getreg.term_cmd) /* ack expected */ monitor_expect_prompt (NULL, 0); /* get response */ monitor_supply_register (regno, regbuf); } /* Sometimes, it takes several commands to dump the registers */ /* This is a primitive for use by variations of monitor interfaces in case they need to compose the operation. */ int monitor_dump_reg_block (char *block_cmd) { char buf[TARGET_BUF_SIZE]; int resp_len; monitor_printf (block_cmd); resp_len = monitor_expect_prompt (buf, sizeof (buf)); parse_register_dump (buf, resp_len); return 1; } /* Read the remote registers into the block regs. */ /* Call the specific function if it has been provided */ static void monitor_dump_regs () { char buf[TARGET_BUF_SIZE]; int resp_len; if (current_monitor->dumpregs) (*(current_monitor->dumpregs)) (); /* call supplied function */ else if (current_monitor->dump_registers) /* default version */ { monitor_printf (current_monitor->dump_registers); resp_len = monitor_expect_prompt (buf, sizeof (buf)); parse_register_dump (buf, resp_len); } else abort (); /* Need some way to read registers */ } static void monitor_fetch_registers (regno) int regno; { monitor_debug ("MON fetchregs\n"); if (current_monitor->getreg.cmd) { if (regno >= 0) { monitor_fetch_register (regno); return; } for (regno = 0; regno < NUM_REGS; regno++) monitor_fetch_register (regno); } else { monitor_dump_regs (); } } /* Store register REGNO, or all if REGNO == 0. Return errno value. */ static void monitor_store_register (regno) int regno; { char *name; ULONGEST val; name = current_monitor->regnames[regno]; if (!name || (*name == '\0')) { monitor_debug ("MON Cannot store unknown register\n"); return; } val = read_register (regno); monitor_debug ("MON storeg %d %s\n", regno, preg (val)); /* send the register deposit command */ if (current_monitor->flags & MO_REGISTER_VALUE_FIRST) monitor_printf (current_monitor->setreg.cmd, val, name); else if (current_monitor->flags & MO_SETREG_INTERACTIVE) monitor_printf (current_monitor->setreg.cmd, name); else monitor_printf (current_monitor->setreg.cmd, name, val); if (current_monitor->setreg.term) { monitor_debug ("EXP setreg.term\n"); monitor_expect (current_monitor->setreg.term, NULL, 0); if (current_monitor->flags & MO_SETREG_INTERACTIVE) monitor_printf ("%s\r", paddr_nz (val)); monitor_expect_prompt (NULL, 0); } else monitor_expect_prompt (NULL, 0); if (current_monitor->setreg.term_cmd) /* Mode exit required */ { monitor_debug ("EXP setreg_termcmd\n"); monitor_printf ("%s", current_monitor->setreg.term_cmd); monitor_expect_prompt (NULL, 0); } } /* monitor_store_register */ /* Store the remote registers. */ static void monitor_store_registers (regno) int regno; { if (regno >= 0) { monitor_store_register (regno); return; } for (regno = 0; regno < NUM_REGS; regno++) monitor_store_register (regno); } /* Get ready to modify the registers array. On machines which store individual registers, this doesn't need to do anything. On machines which store all the registers in one fell swoop, this makes sure that registers contains all the registers from the program being debugged. */ static void monitor_prepare_to_store () { /* Do nothing, since we can store individual regs */ } static void monitor_files_info (ops) struct target_ops *ops; { printf_unfiltered ("\tAttached to %s at %d baud.\n", dev_name, baud_rate); } static int monitor_write_memory (memaddr, myaddr, len) CORE_ADDR memaddr; char *myaddr; int len; { unsigned int val, hostval; char *cmd; int i; monitor_debug ("MON write %d %s\n", len, paddr (memaddr)); if (current_monitor->flags & MO_ADDR_BITS_REMOVE) memaddr = ADDR_BITS_REMOVE (memaddr); /* Use memory fill command for leading 0 bytes. */ if (current_monitor->fill) { for (i = 0; i < len; i++) if (myaddr[i] != 0) break; if (i > 4) /* More than 4 zeros is worth doing */ { monitor_debug ("MON FILL %d\n", i); if (current_monitor->flags & MO_FILL_USES_ADDR) monitor_printf (current_monitor->fill, memaddr, (memaddr + i) - 1, 0); else monitor_printf (current_monitor->fill, memaddr, i, 0); monitor_expect_prompt (NULL, 0); return i; } } #if 0 /* Can't actually use long longs if VAL is an int (nice idea, though). */ if ((memaddr & 0x7) == 0 && len >= 8 && current_monitor->setmem.cmdll) { len = 8; cmd = current_monitor->setmem.cmdll; } else #endif if ((memaddr & 0x3) == 0 && len >= 4 && current_monitor->setmem.cmdl) { len = 4; cmd = current_monitor->setmem.cmdl; } else if ((memaddr & 0x1) == 0 && len >= 2 && current_monitor->setmem.cmdw) { len = 2; cmd = current_monitor->setmem.cmdw; } else { len = 1; cmd = current_monitor->setmem.cmdb; } val = extract_unsigned_integer (myaddr, len); if (len == 4) { hostval = *(unsigned int *) myaddr; monitor_debug ("Hostval(%08x) val(%08x)\n", hostval, val); } if (current_monitor->flags & MO_NO_ECHO_ON_SETMEM) monitor_printf_noecho (cmd, memaddr, val); else if (current_monitor->flags & MO_SETMEM_INTERACTIVE) { monitor_printf_noecho (cmd, memaddr); if (current_monitor->setmem.term) { monitor_debug ("EXP setmem.term"); monitor_expect (current_monitor->setmem.term, NULL, 0); monitor_printf ("%x\r", val); } if (current_monitor->setmem.term_cmd) { /* Emit this to get out of the memory editing state */ monitor_printf ("%s", current_monitor->setmem.term_cmd); /* Drop through to expecting a prompt */ } } else monitor_printf (cmd, memaddr, val); monitor_expect_prompt (NULL, 0); return len; } static int monitor_write_even_block (memaddr, myaddr, len) CORE_ADDR memaddr; char *myaddr; int len; { unsigned int val; int written = 0;; /* Enter the sub mode */ monitor_printf (current_monitor->setmem.cmdl, memaddr); monitor_expect_prompt (NULL, 0); while (len) { val = extract_unsigned_integer (myaddr, 4); /* REALLY */ monitor_printf ("%x\r", val); myaddr += 4; memaddr += 4; written += 4; monitor_debug (" @ %s\n", paddr (memaddr)); /* If we wanted to, here we could validate the address */ monitor_expect_prompt (NULL, 0); } /* Now exit the sub mode */ monitor_printf (current_monitor->getreg.term_cmd); monitor_expect_prompt (NULL, 0); return written; } static int monitor_write_memory_bytes (memaddr, myaddr, len) CORE_ADDR memaddr; char *myaddr; int len; { unsigned char val; int written = 0; if (len == 0) return 0; /* Enter the sub mode */ monitor_printf (current_monitor->setmem.cmdb, memaddr); monitor_expect_prompt (NULL, 0); while (len) { val = *myaddr; monitor_printf ("%x\r", val); myaddr++; memaddr++; written++; /* If we wanted to, here we could validate the address */ monitor_expect_prompt (NULL, 0); len--; } /* Now exit the sub mode */ monitor_printf (current_monitor->getreg.term_cmd); monitor_expect_prompt (NULL, 0); return written; } static void longlongendswap (unsigned char *a) { int i, j; unsigned char x; i = 0; j = 7; while (i < 4) { x = *(a + i); *(a + i) = *(a + j); *(a + j) = x; i++, j--; } } /* Format 32 chars of long long value, advance the pointer */ static char *hexlate = "0123456789abcdef"; static char * longlong_hexchars (unsigned long long value, char *outbuff) { if (value == 0) { *outbuff++ = '0'; return outbuff; } else { static unsigned char disbuf[8]; /* disassembly buffer */ unsigned char *scan, *limit; /* loop controls */ unsigned char c, nib; int leadzero = 1; scan = disbuf; limit = scan + 8; { unsigned long long *dp; dp = (unsigned long long *) scan; *dp = value; } longlongendswap (disbuf); /* FIXME: ONly on big endian hosts */ while (scan < limit) { c = *scan++; /* a byte of our long long value */ if (leadzero) { if (c == 0) continue; else leadzero = 0; /* henceforth we print even zeroes */ } nib = c >> 4; /* high nibble bits */ *outbuff++ = hexlate[nib]; nib = c & 0x0f; /* low nibble bits */ *outbuff++ = hexlate[nib]; } return outbuff; } } /* longlong_hexchars */ /* I am only going to call this when writing virtual byte streams. Which possably entails endian conversions */ static int monitor_write_memory_longlongs (memaddr, myaddr, len) CORE_ADDR memaddr; char *myaddr; int len; { static char hexstage[20]; /* At least 16 digits required, plus null */ char *endstring; long long *llptr; long long value; int written = 0; llptr = (unsigned long long *) myaddr; if (len == 0) return 0; monitor_printf (current_monitor->setmem.cmdll, memaddr); monitor_expect_prompt (NULL, 0); while (len >= 8) { value = *llptr; endstring = longlong_hexchars (*llptr, hexstage); *endstring = '\0'; /* NUll terminate for printf */ monitor_printf ("%s\r", hexstage); llptr++; memaddr += 8; written += 8; /* If we wanted to, here we could validate the address */ monitor_expect_prompt (NULL, 0); len -= 8; } /* Now exit the sub mode */ monitor_printf (current_monitor->getreg.term_cmd); monitor_expect_prompt (NULL, 0); return written; } /* */ /* ----- MONITOR_WRITE_MEMORY_BLOCK ---------------------------- */ /* This is for the large blocks of memory which may occur in downloading. And for monitors which use interactive entry, And for monitors which do not have other downloading methods. Without this, we will end up calling monitor_write_memory many times and do the entry and exit of the sub mode many times This currently assumes... MO_SETMEM_INTERACTIVE ! MO_NO_ECHO_ON_SETMEM To use this, the you have to patch the monitor_cmds block with this function. Otherwise, its not tuned up for use by all monitor variations. */ static int monitor_write_memory_block (memaddr, myaddr, len) CORE_ADDR memaddr; char *myaddr; int len; { int written; written = 0; /* FIXME: This would be a good place to put the zero test */ #if 1 if ((len > 8) && (((len & 0x07)) == 0) && current_monitor->setmem.cmdll) { return monitor_write_memory_longlongs (memaddr, myaddr, len); } #endif #if 0 if (len > 4) { int sublen; written = monitor_write_even_block (memaddr, myaddr, len); /* Adjust calling parameters by written amount */ memaddr += written; myaddr += written; len -= written; } #endif written = monitor_write_memory_bytes (memaddr, myaddr, len); return written; } /* This is an alternate form of monitor_read_memory which is used for monitors which can only read a single byte/word/etc. at a time. */ static int monitor_read_memory_single (memaddr, myaddr, len) CORE_ADDR memaddr; char *myaddr; int len; { unsigned int val; char membuf[sizeof (int) * 2 + 1]; char *p; char *cmd; int i; monitor_debug ("MON read single\n"); #if 0 /* Can't actually use long longs (nice idea, though). In fact, the call to strtoul below will fail if it tries to convert a value that's too big to fit in a long. */ if ((memaddr & 0x7) == 0 && len >= 8 && current_monitor->getmem.cmdll) { len = 8; cmd = current_monitor->getmem.cmdll; } else #endif if ((memaddr & 0x3) == 0 && len >= 4 && current_monitor->getmem.cmdl) { len = 4; cmd = current_monitor->getmem.cmdl; } else if ((memaddr & 0x1) == 0 && len >= 2 && current_monitor->getmem.cmdw) { len = 2; cmd = current_monitor->getmem.cmdw; } else { len = 1; cmd = current_monitor->getmem.cmdb; } /* Send the examine command. */ monitor_printf (cmd, memaddr); /* If RESP_DELIM is specified, we search for that as a leading delimiter for the memory value. Otherwise, we just start searching from the start of the buf. */ if (current_monitor->getmem.resp_delim) { monitor_debug ("EXP getmem.resp_delim\n"); monitor_expect_regexp (&getmem_resp_delim_pattern, NULL, 0); } /* Now, read the appropriate number of hex digits for this loc, skipping spaces. */ /* Skip leading spaces and "0x" if MO_HEX_PREFIX flag is set. */ if (current_monitor->flags & MO_HEX_PREFIX) { int c; c = readchar (timeout); while (c == ' ') c = readchar (timeout); if ((c == '0') && ((c = readchar (timeout)) == 'x')) ; else monitor_error ("monitor_read_memory_single", "bad response from monitor", memaddr, i, membuf, c); } for (i = 0; i < len * 2; i++) { int c; while (1) { c = readchar (timeout); if (isxdigit (c)) break; if (c == ' ') continue; monitor_error ("monitor_read_memory_single", "bad response from monitor", memaddr, i, membuf, c); } membuf[i] = c; } membuf[i] = '\000'; /* terminate the number */ /* If TERM is present, we wait for that to show up. Also, (if TERM is present), we will send TERM_CMD if that is present. In any case, we collect all of the output into buf, and then wait for the normal prompt. */ if (current_monitor->getmem.term) { monitor_expect (current_monitor->getmem.term, NULL, 0); /* get response */ if (current_monitor->getmem.term_cmd) { monitor_printf (current_monitor->getmem.term_cmd); monitor_expect_prompt (NULL, 0); } } else monitor_expect_prompt (NULL, 0); /* get response */ p = membuf; val = strtoul (membuf, &p, 16); if (val == 0 && membuf == p) monitor_error ("monitor_read_memory_single", "bad value from monitor", memaddr, 0, membuf, 0); /* supply register stores in target byte order, so swap here */ store_unsigned_integer (myaddr, len, val); return len; } /* Copy LEN bytes of data from debugger memory at MYADDR to inferior's memory at MEMADDR. Returns length moved. Currently, we do no more than 16 bytes at a time. */ static int monitor_read_memory (memaddr, myaddr, len) CORE_ADDR memaddr; char *myaddr; int len; { unsigned int val; char buf[512]; char *p, *p1; int resp_len; int i; CORE_ADDR dumpaddr; if (len <= 0) { monitor_debug ("Zero length call to monitor_read_memory\n"); return 0; } monitor_debug ("MON read block ta(%s) ha(%lx) %d\n", paddr_nz (memaddr), (long) myaddr, len); if (current_monitor->flags & MO_ADDR_BITS_REMOVE) memaddr = ADDR_BITS_REMOVE (memaddr); if (current_monitor->flags & MO_GETMEM_READ_SINGLE) return monitor_read_memory_single (memaddr, myaddr, len); len = min (len, 16); /* Some dumpers align the first data with the preceeding 16 byte boundary. Some print blanks and start at the requested boundary. EXACT_DUMPADDR */ dumpaddr = (current_monitor->flags & MO_EXACT_DUMPADDR) ? memaddr : memaddr & ~0x0f; /* See if xfer would cross a 16 byte boundary. If so, clip it. */ if (((memaddr ^ (memaddr + len - 1)) & ~0xf) != 0) len = ((memaddr + len) & ~0xf) - memaddr; /* send the memory examine command */ if (current_monitor->flags & MO_GETMEM_NEEDS_RANGE) monitor_printf (current_monitor->getmem.cmdb, memaddr, memaddr + len); else if (current_monitor->flags & MO_GETMEM_16_BOUNDARY) monitor_printf (current_monitor->getmem.cmdb, dumpaddr); else monitor_printf (current_monitor->getmem.cmdb, memaddr, len); /* If TERM is present, we wait for that to show up. Also, (if TERM is present), we will send TERM_CMD if that is present. In any case, we collect all of the output into buf, and then wait for the normal prompt. */ if (current_monitor->getmem.term) { resp_len = monitor_expect (current_monitor->getmem.term, buf, sizeof buf); /* get response */ if (resp_len <= 0) monitor_error ("monitor_read_memory", "excessive response from monitor", memaddr, resp_len, buf, 0); if (current_monitor->getmem.term_cmd) { SERIAL_WRITE (monitor_desc, current_monitor->getmem.term_cmd, strlen (current_monitor->getmem.term_cmd)); monitor_expect_prompt (NULL, 0); } } else resp_len = monitor_expect_prompt (buf, sizeof buf); /* get response */ p = buf; /* If RESP_DELIM is specified, we search for that as a leading delimiter for the values. Otherwise, we just start searching from the start of the buf. */ if (current_monitor->getmem.resp_delim) { int retval, tmp; struct re_registers resp_strings; monitor_debug ("MON getmem.resp_delim %s\n", current_monitor->getmem.resp_delim); memset (&resp_strings, 0, sizeof (struct re_registers)); tmp = strlen (p); retval = re_search (&getmem_resp_delim_pattern, p, tmp, 0, tmp, &resp_strings); if (retval < 0) monitor_error ("monitor_read_memory", "bad response from monitor", memaddr, resp_len, buf, 0); p += resp_strings.end[0]; #if 0 p = strstr (p, current_monitor->getmem.resp_delim); if (!p) monitor_error ("monitor_read_memory", "bad response from monitor", memaddr, resp_len, buf, 0); p += strlen (current_monitor->getmem.resp_delim); #endif } monitor_debug ("MON scanning %d ,%lx '%s'\n", len, (long) p, p); if (current_monitor->flags & MO_GETMEM_16_BOUNDARY) { char c; int fetched = 0; i = len; c = *p; while (!(c == '\000' || c == '\n' || c == '\r') && i > 0) { if (isxdigit (c)) { if ((dumpaddr >= memaddr) && (i > 0)) { val = fromhex (c) * 16 + fromhex (*(p + 1)); *myaddr++ = val; if (monitor_debug_p || remote_debug) fprintf_unfiltered (gdb_stdlog, "[%02x]", val); --i; fetched++; } ++dumpaddr; ++p; } ++p; /* skip a blank or other non hex char */ c = *p; } if (fetched == 0) error ("Failed to read via monitor"); if (monitor_debug_p || remote_debug) fprintf_unfiltered (gdb_stdlog, "\n"); return fetched; /* Return the number of bytes actually read */ } monitor_debug ("MON scanning bytes\n"); for (i = len; i > 0; i--) { /* Skip non-hex chars, but bomb on end of string and newlines */ while (1) { if (isxdigit (*p)) break; if (*p == '\000' || *p == '\n' || *p == '\r') monitor_error ("monitor_read_memory", "badly terminated response from monitor", memaddr, resp_len, buf, 0); p++; } val = strtoul (p, &p1, 16); if (val == 0 && p == p1) monitor_error ("monitor_read_memory", "bad value from monitor", memaddr, resp_len, buf, 0); *myaddr++ = val; if (i == 1) break; p = p1; } return len; } static int monitor_xfer_memory (memaddr, myaddr, len, write, target) CORE_ADDR memaddr; char *myaddr; int len; int write; struct target_ops *target; /* ignored */ { return dcache_xfer_memory (remote_dcache, memaddr, myaddr, len, write); } static void monitor_kill () { return; /* ignore attempts to kill target system */ } /* All we actually do is set the PC to the start address of exec_bfd, and start the program at that point. */ static void monitor_create_inferior (exec_file, args, env) char *exec_file; char *args; char **env; { if (args && (*args != '\000')) error ("Args are not supported by the monitor."); first_time = 1; clear_proceed_status (); proceed (bfd_get_start_address (exec_bfd), TARGET_SIGNAL_0, 0); } /* Clean up when a program exits. The program actually lives on in the remote processor's RAM, and may be run again without a download. Don't leave it full of breakpoint instructions. */ static void monitor_mourn_inferior () { unpush_target (targ_ops); generic_mourn_inferior (); /* Do all the proper things now */ } /* Tell the monitor to add a breakpoint. */ static int monitor_insert_breakpoint (addr, shadow) CORE_ADDR addr; char *shadow; { int i; unsigned char *bp; int bplen; monitor_debug ("MON inst bkpt %s\n", paddr (addr)); if (current_monitor->set_break == NULL) error ("No set_break defined for this monitor"); if (current_monitor->flags & MO_ADDR_BITS_REMOVE) addr = ADDR_BITS_REMOVE (addr); /* Determine appropriate breakpoint size for this address. */ bp = memory_breakpoint_from_pc (&addr, &bplen); for (i = 0; i < current_monitor->num_breakpoints; i++) { if (breakaddr[i] == 0) { breakaddr[i] = addr; monitor_read_memory (addr, shadow, bplen); monitor_printf (current_monitor->set_break, addr); monitor_expect_prompt (NULL, 0); return 0; } } error ("Too many breakpoints (> %d) for monitor.", current_monitor->num_breakpoints); } /* Tell the monitor to remove a breakpoint. */ static int monitor_remove_breakpoint (addr, shadow) CORE_ADDR addr; char *shadow; { int i; monitor_debug ("MON rmbkpt %s\n", paddr (addr)); if (current_monitor->clr_break == NULL) error ("No clr_break defined for this monitor"); if (current_monitor->flags & MO_ADDR_BITS_REMOVE) addr = ADDR_BITS_REMOVE (addr); for (i = 0; i < current_monitor->num_breakpoints; i++) { if (breakaddr[i] == addr) { breakaddr[i] = 0; /* some monitors remove breakpoints based on the address */ if (current_monitor->flags & MO_CLR_BREAK_USES_ADDR) monitor_printf (current_monitor->clr_break, addr); else if (current_monitor->flags & MO_CLR_BREAK_1_BASED) monitor_printf (current_monitor->clr_break, i + 1); else monitor_printf (current_monitor->clr_break, i); monitor_expect_prompt (NULL, 0); return 0; } } fprintf_unfiltered (gdb_stderr, "Can't find breakpoint associated with 0x%s\n", paddr_nz (addr)); return 1; } /* monitor_wait_srec_ack -- wait for the target to send an acknowledgement for an S-record. Return non-zero if the ACK is received properly. */ static int monitor_wait_srec_ack () { int ch; if (current_monitor->flags & MO_SREC_ACK_PLUS) { return (readchar (timeout) == '+'); } else if (current_monitor->flags & MO_SREC_ACK_ROTATE) { /* Eat two backspaces, a "rotating" char (|/-\), and a space. */ if ((ch = readchar (1)) < 0) return 0; if ((ch = readchar (1)) < 0) return 0; if ((ch = readchar (1)) < 0) return 0; if ((ch = readchar (1)) < 0) return 0; } return 1; } /* monitor_load -- download a file. */ static void monitor_load (file, from_tty) char *file; int from_tty; { dcache_flush (remote_dcache); monitor_debug ("MON load\n"); if (current_monitor->load_routine) current_monitor->load_routine (monitor_desc, file, hashmark); else { /* The default is ascii S-records */ int n; unsigned long load_offset; char buf[128]; /* enable user to specify address for downloading as 2nd arg to load */ n = sscanf (file, "%s 0x%lx", buf, &load_offset); if (n > 1) file = buf; else load_offset = 0; monitor_printf (current_monitor->load); if (current_monitor->loadresp) monitor_expect (current_monitor->loadresp, NULL, 0); load_srec (monitor_desc, file, (bfd_vma) load_offset, 32, SREC_ALL, hashmark, current_monitor->flags & MO_SREC_ACK ? monitor_wait_srec_ack : NULL); monitor_expect_prompt (NULL, 0); } /* Finally, make the PC point at the start address */ if (exec_bfd) write_pc (bfd_get_start_address (exec_bfd)); inferior_pid = 0; /* No process now */ /* This is necessary because many things were based on the PC at the time that we attached to the monitor, which is no longer valid now that we have loaded new code (and just changed the PC). Another way to do this might be to call normal_stop, except that the stack may not be valid, and things would get horribly confused... */ clear_symtab_users (); } static void monitor_stop () { monitor_debug ("MON stop\n"); if ((current_monitor->flags & MO_SEND_BREAK_ON_STOP) != 0) SERIAL_SEND_BREAK (monitor_desc); if (current_monitor->stop) monitor_printf_noecho (current_monitor->stop); } /* Put a COMMAND string out to MONITOR. Output from MONITOR is placed in OUTPUT until the prompt is seen. FIXME: We read the characters ourseleves here cause of a nasty echo. */ static void monitor_rcmd (char *command, struct ui_file *outbuf) { char *p; int resp_len; char buf[1000]; if (monitor_desc == NULL) error ("monitor target not open."); p = current_monitor->prompt; /* Send the command. Note that if no args were supplied, then we're just sending the monitor a newline, which is sometimes useful. */ monitor_printf ("%s\r", (command ? command : "")); resp_len = monitor_expect_prompt (buf, sizeof buf); fputs_unfiltered (buf, outbuf); /* Output the response */ } /* Convert hex digit A to a number. */ #if 0 static int from_hex (a) int a; { if (a >= '0' && a <= '9') return a - '0'; if (a >= 'a' && a <= 'f') return a - 'a' + 10; if (a >= 'A' && a <= 'F') return a - 'A' + 10; error ("Reply contains invalid hex digit 0x%x", a); } #endif char * monitor_get_dev_name () { return dev_name; } static struct target_ops monitor_ops; static void init_base_monitor_ops (void) { monitor_ops.to_shortname = NULL; monitor_ops.to_longname = NULL; monitor_ops.to_doc = NULL; monitor_ops.to_open = NULL; monitor_ops.to_close = monitor_close; monitor_ops.to_attach = NULL; monitor_ops.to_post_attach = NULL; monitor_ops.to_require_attach = NULL; monitor_ops.to_detach = monitor_detach; monitor_ops.to_require_detach = NULL; monitor_ops.to_resume = monitor_resume; monitor_ops.to_wait = monitor_wait; monitor_ops.to_post_wait = NULL; monitor_ops.to_fetch_registers = monitor_fetch_registers; monitor_ops.to_store_registers = monitor_store_registers; monitor_ops.to_prepare_to_store = monitor_prepare_to_store; monitor_ops.to_xfer_memory = monitor_xfer_memory; monitor_ops.to_files_info = monitor_files_info; monitor_ops.to_insert_breakpoint = monitor_insert_breakpoint; monitor_ops.to_remove_breakpoint = monitor_remove_breakpoint; monitor_ops.to_terminal_init = 0; monitor_ops.to_terminal_inferior = 0; monitor_ops.to_terminal_ours_for_output = 0; monitor_ops.to_terminal_ours = 0; monitor_ops.to_terminal_info = 0; monitor_ops.to_kill = monitor_kill; monitor_ops.to_load = monitor_load; monitor_ops.to_lookup_symbol = 0; monitor_ops.to_create_inferior = monitor_create_inferior; monitor_ops.to_post_startup_inferior = NULL; monitor_ops.to_acknowledge_created_inferior = NULL; monitor_ops.to_clone_and_follow_inferior = NULL; monitor_ops.to_post_follow_inferior_by_clone = NULL; monitor_ops.to_insert_fork_catchpoint = NULL; monitor_ops.to_remove_fork_catchpoint = NULL; monitor_ops.to_insert_vfork_catchpoint = NULL; monitor_ops.to_remove_vfork_catchpoint = NULL; monitor_ops.to_has_forked = NULL; monitor_ops.to_has_vforked = NULL; monitor_ops.to_can_follow_vfork_prior_to_exec = NULL; monitor_ops.to_post_follow_vfork = NULL; monitor_ops.to_insert_exec_catchpoint = NULL; monitor_ops.to_remove_exec_catchpoint = NULL; monitor_ops.to_has_execd = NULL; monitor_ops.to_reported_exec_events_per_exec_call = NULL; monitor_ops.to_has_exited = NULL; monitor_ops.to_mourn_inferior = monitor_mourn_inferior; monitor_ops.to_can_run = 0; monitor_ops.to_notice_signals = 0; monitor_ops.to_thread_alive = 0; monitor_ops.to_stop = monitor_stop; monitor_ops.to_rcmd = monitor_rcmd; monitor_ops.to_pid_to_exec_file = NULL; monitor_ops.to_core_file_to_sym_file = NULL; monitor_ops.to_stratum = process_stratum; monitor_ops.DONT_USE = 0; monitor_ops.to_has_all_memory = 1; monitor_ops.to_has_memory = 1; monitor_ops.to_has_stack = 1; monitor_ops.to_has_registers = 1; monitor_ops.to_has_execution = 1; monitor_ops.to_sections = 0; monitor_ops.to_sections_end = 0; monitor_ops.to_magic = OPS_MAGIC; } /* init_base_monitor_ops */ /* Init the target_ops structure pointed at by OPS */ void init_monitor_ops (ops) struct target_ops *ops; { if (monitor_ops.to_magic != OPS_MAGIC) init_base_monitor_ops (); memcpy (ops, &monitor_ops, sizeof monitor_ops); } /* Define additional commands that are usually only used by monitors. */ void _initialize_remote_monitors () { init_base_monitor_ops (); add_show_from_set (add_set_cmd ("hash", no_class, var_boolean, (char *) &hashmark, "Set display of activity while downloading a file.\n\ When enabled, a hashmark \'#\' is displayed.", &setlist), &showlist); add_show_from_set (add_set_cmd ("monitor", no_class, var_zinteger, (char *) &monitor_debug_p, "Set debugging of remote monitor communication.\n\ When enabled, communication between GDB and the remote monitor\n\ is displayed.", &setdebuglist), &showdebuglist); }