/* Target-dependent code for the Matsushita MN10300 for GDB, the GNU debugger. Prologue analysis module, extracted from mn10300-tdep.c, Oct. 1, 2004. Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc. This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include "defs.h" #include "symtab.h" #include "inferior.h" #include "gdbcore.h" #include "gdb_string.h" #include "trad-frame.h" #include "mn10300-tdep.h" enum movm_register_bits { movm_exother_bit = 0x01, movm_exreg1_bit = 0x02, movm_exreg0_bit = 0x04, movm_other_bit = 0x08, movm_a3_bit = 0x10, movm_a2_bit = 0x20, movm_d3_bit = 0x40, movm_d2_bit = 0x80 }; /* Values for frame_info.status */ enum frame_kind { MY_FRAME_IN_SP = 0x1, MY_FRAME_IN_FP = 0x2, NO_MORE_FRAMES = 0x4 }; /* * Frame Extra Info: * * status -- actually frame type (SP, FP, or last frame) * stack size -- offset to the next frame * * The former might ultimately be stored in the frame_base. * Seems like there'd be a way to store the later too. * * Temporarily supply empty stub functions as place holders. */ static void my_frame_is_in_sp (struct frame_info *fi, void **this_cache) { struct trad_frame_cache *cache = mn10300_frame_unwind_cache (fi, this_cache); trad_frame_set_this_base (cache, frame_unwind_register_unsigned (fi, E_SP_REGNUM)); } static void my_frame_is_in_fp (struct frame_info *fi, void **this_cache) { struct trad_frame_cache *cache = mn10300_frame_unwind_cache (fi, this_cache); trad_frame_set_this_base (cache, frame_unwind_register_unsigned (fi, E_A3_REGNUM)); } static void my_frame_is_last (struct frame_info *fi) { } static int is_my_frame_in_sp (struct frame_info *fi) { return 0; } static int is_my_frame_in_fp (struct frame_info *fi) { return 0; } static int is_my_frame_last (struct frame_info *fi) { return 0; } static void set_my_stack_size (struct frame_info *fi, CORE_ADDR size) { } /* Fix fi->frame if it's bogus at this point. This is a helper function for mn10300_analyze_prologue. MVS: This later became frame_base_hack, and probably now could just be trad_frame_set_this_base. */ static void fix_frame_pointer (struct frame_info *fi, int stack_size) { #if 0 if (fi && get_next_frame (fi) == NULL) { if (is_my_frame_in_sp (fi)) deprecated_update_frame_base_hack (fi, read_sp () - stack_size); else if (is_my_frame_in_fp (fi)) deprecated_update_frame_base_hack (fi, read_register (E_A3_REGNUM)); } #endif } /* Set offsets of registers saved by movm instruction. This is a helper function for mn10300_analyze_prologue. */ static void set_movm_offsets (struct frame_info *fi, void **this_cache, int movm_args) { struct trad_frame_cache *cache; int offset = 0; CORE_ADDR base; if (cache == NULL || fi == NULL || movm_args == 0) return; cache = mn10300_frame_unwind_cache (fi, this_cache); base = trad_frame_get_this_base (cache); if (movm_args & movm_other_bit) { /* The `other' bit leaves a blank area of four bytes at the beginning of its block of saved registers, making it 32 bytes long in total. */ trad_frame_set_reg_addr (cache, E_LAR_REGNUM, base + offset + 4); trad_frame_set_reg_addr (cache, E_LIR_REGNUM, base + offset + 8); trad_frame_set_reg_addr (cache, E_MDR_REGNUM, base + offset + 12); trad_frame_set_reg_addr (cache, E_A0_REGNUM + 1, base + offset + 16); trad_frame_set_reg_addr (cache, E_A0_REGNUM, base + offset + 20); trad_frame_set_reg_addr (cache, E_D0_REGNUM + 1, base + offset + 24); trad_frame_set_reg_addr (cache, E_D0_REGNUM, base + offset + 28); offset += 32; } if (movm_args & movm_a3_bit) { trad_frame_set_reg_addr (cache, E_A3_REGNUM, base + offset); offset += 4; } if (movm_args & movm_a2_bit) { trad_frame_set_reg_addr (cache, E_A2_REGNUM, base + offset); offset += 4; } if (movm_args & movm_d3_bit) { trad_frame_set_reg_addr (cache, E_D3_REGNUM, base + offset); offset += 4; } if (movm_args & movm_d2_bit) { trad_frame_set_reg_addr (cache, E_D2_REGNUM, base + offset); offset += 4; } if (AM33_MODE) { if (movm_args & movm_exother_bit) { trad_frame_set_reg_addr (cache, E_MCVF_REGNUM, base + offset); trad_frame_set_reg_addr (cache, E_MCRL_REGNUM, base + offset + 4); trad_frame_set_reg_addr (cache, E_MCRH_REGNUM, base + offset + 8); trad_frame_set_reg_addr (cache, E_MDRQ_REGNUM, base + offset + 12); trad_frame_set_reg_addr (cache, E_E1_REGNUM, base + offset + 16); trad_frame_set_reg_addr (cache, E_E0_REGNUM, base + offset + 20); offset += 24; } if (movm_args & movm_exreg1_bit) { trad_frame_set_reg_addr (cache, E_E7_REGNUM, base + offset); trad_frame_set_reg_addr (cache, E_E6_REGNUM, base + offset + 4); trad_frame_set_reg_addr (cache, E_E5_REGNUM, base + offset + 8); trad_frame_set_reg_addr (cache, E_E4_REGNUM, base + offset + 12); offset += 16; } if (movm_args & movm_exreg0_bit) { trad_frame_set_reg_addr (cache, E_E3_REGNUM, base + offset); trad_frame_set_reg_addr (cache, E_E2_REGNUM, base + offset + 4); offset += 8; } } /* The last (or first) thing on the stack will be the PC. */ trad_frame_set_reg_addr (cache, E_PC_REGNUM, base + offset); /* Save the SP in the 'traditional' way. This will be the same location where the PC is saved. */ trad_frame_set_reg_value (cache, E_SP_REGNUM, base + offset); } /* The main purpose of this file is dealing with prologues to extract information about stack frames and saved registers. In gcc/config/mn13000/mn10300.c, the expand_prologue prologue function is pretty readable, and has a nice explanation of how the prologue is generated. The prologues generated by that code will have the following form (NOTE: the current code doesn't handle all this!): + If this is an old-style varargs function, then its arguments need to be flushed back to the stack: mov d0,(4,sp) mov d1,(4,sp) + If we use any of the callee-saved registers, save them now. movm [some callee-saved registers],(sp) + If we have any floating-point registers to save: - Decrement the stack pointer to reserve space for the registers. If the function doesn't need a frame pointer, we may combine this with the adjustment that reserves space for the frame. add -SIZE, sp - Save the floating-point registers. We have two possible strategies: . Save them at fixed offset from the SP: fmov fsN,(OFFSETN,sp) fmov fsM,(OFFSETM,sp) ... Note that, if OFFSETN happens to be zero, you'll get the different opcode: fmov fsN,(sp) . Or, set a0 to the start of the save area, and then use post-increment addressing to save the FP registers. mov sp, a0 add SIZE, a0 fmov fsN,(a0+) fmov fsM,(a0+) ... + If the function needs a frame pointer, we set it here. mov sp, a3 + Now we reserve space for the stack frame proper. This could be merged into the `add -SIZE, sp' instruction for FP saves up above, unless we needed to set the frame pointer in the previous step, or the frame is so large that allocating the whole thing at once would put the FP register save slots out of reach of the addressing mode (128 bytes). add -SIZE, sp One day we might keep the stack pointer constant, that won't change the code for prologues, but it will make the frame pointerless case much more common. */ /* Analyze the prologue to determine where registers are saved, the end of the prologue, etc etc. Return the end of the prologue scanned. We store into FI (if non-null) several tidbits of information: * stack_size -- size of this stack frame. Note that if we stop in certain parts of the prologue/epilogue we may claim the size of the current frame is zero. This happens when the current frame has not been allocated yet or has already been deallocated. * fsr -- Addresses of registers saved in the stack by this frame. * status -- A (relatively) generic status indicator. It's a bitmask with the following bits: MY_FRAME_IN_SP: The base of the current frame is actually in the stack pointer. This can happen for frame pointerless functions, or cases where we're stopped in the prologue/epilogue itself. For these cases mn10300_analyze_prologue will need up update fi->frame before returning or analyzing the register save instructions. MY_FRAME_IN_FP: The base of the current frame is in the frame pointer register ($a3). NO_MORE_FRAMES: Set this if the current frame is "start" or if the first instruction looks like mov <imm>,sp. This tells frame chain to not bother trying to unwind past this frame. */ CORE_ADDR mn10300_analyze_prologue (struct frame_info *fi, void **this_cache, CORE_ADDR pc) { CORE_ADDR func_addr, func_end, addr, stop; long stack_size; int imm_size; unsigned char buf[4]; int status, movm_args = 0; char *name; /* Use the PC in the frame if it's provided to look up the start of this function. Note: kevinb/2003-07-16: We used to do the following here: pc = (fi ? get_frame_pc (fi) : pc); But this is (now) badly broken when called from analyze_dummy_frame(). */ pc = (pc ? pc : get_frame_pc (fi)); /* Find the start of this function. */ status = find_pc_partial_function (pc, &name, &func_addr, &func_end); /* Do nothing if we couldn't find the start of this function or if we're stopped at the first instruction in the prologue. */ if (status == 0) { return pc; } /* If we're in start, then give up. */ if (strcmp (name, "start") == 0) { if (fi != NULL) my_frame_is_last (fi); return pc; } /* At the start of a function our frame is in the stack pointer. */ if (fi) my_frame_is_in_sp (fi, this_cache); #if 0 /* Get the next two bytes into buf, we need two because rets is a two byte insn and the first isn't enough to uniquely identify it. */ status = deprecated_read_memory_nobpt (pc, buf, 2); if (status != 0) return pc; /* Note: kevinb/2003-07-16: We shouldn't be making these sorts of changes to the frame in prologue examination code. */ /* If we're physically on an "rets" instruction, then our frame has already been deallocated. Note this can also be true for retf and ret if they specify a size of zero. In this case fi->frame is bogus, we need to fix it. */ if (fi && buf[0] == 0xf0 && buf[1] == 0xfc) { if (get_next_frame (fi) == NULL) deprecated_update_frame_base_hack (fi, read_sp ()); return get_frame_pc (fi); } /* Similarly if we're stopped on the first insn of a prologue as our frame hasn't been allocated yet. */ if (fi && get_frame_pc (fi) == func_addr) { if (get_next_frame (fi) == NULL) deprecated_update_frame_base_hack (fi, read_sp ()); return get_frame_pc (fi); } #endif /* Figure out where to stop scanning. */ stop = fi ? pc : func_end; /* Don't walk off the end of the function. */ stop = stop > func_end ? func_end : stop; /* Start scanning on the first instruction of this function. */ addr = func_addr; /* Suck in two bytes. */ if (addr + 2 >= stop || (status = deprecated_read_memory_nobpt (addr, buf, 2)) != 0) { fix_frame_pointer (fi, 0); return addr; } /* First see if this insn sets the stack pointer from a register; if so, it's probably the initialization of the stack pointer in _start, so mark this as the bottom-most frame. */ if (buf[0] == 0xf2 && (buf[1] & 0xf3) == 0xf0) { if (fi) my_frame_is_last (fi); return addr; } /* Now look for movm [regs],sp, which saves the callee saved registers. At this time we don't know if fi->frame is valid, so we only note that we encountered a movm instruction. Later, we'll set the entries in fsr.regs as needed. */ if (buf[0] == 0xcf) { /* Extract the register list for the movm instruction. */ movm_args = buf[1]; addr += 2; /* Quit now if we're beyond the stop point. */ if (addr >= stop) { /* Fix fi->frame since it's bogus at this point. */ if (fi && get_next_frame (fi) == NULL) deprecated_update_frame_base_hack (fi, read_sp ()); /* Note if/where callee saved registers were saved. */ set_movm_offsets (fi, this_cache, movm_args); return addr; } /* Get the next two bytes so the prologue scan can continue. */ status = deprecated_read_memory_nobpt (addr, buf, 2); if (status != 0) { /* Fix fi->frame since it's bogus at this point. */ if (fi && get_next_frame (fi) == NULL) deprecated_update_frame_base_hack (fi, read_sp ()); /* Note if/where callee saved registers were saved. */ set_movm_offsets (fi, this_cache, movm_args); return addr; } } /* Now see if we set up a frame pointer via "mov sp,a3" */ if (buf[0] == 0x3f) { addr += 1; /* The frame pointer is now valid. */ if (fi) { my_frame_is_in_fp (fi, this_cache); } /* Quit now if we're beyond the stop point. */ if (addr >= stop) { /* Fix fi->frame if it's bogus at this point. */ fix_frame_pointer (fi, 0); /* Note if/where callee saved registers were saved. */ set_movm_offsets (fi, this_cache, movm_args); return addr; } /* Get two more bytes so scanning can continue. */ status = deprecated_read_memory_nobpt (addr, buf, 2); if (status != 0) { /* Fix fi->frame if it's bogus at this point. */ fix_frame_pointer (fi, 0); /* Note if/where callee saved registers were saved. */ set_movm_offsets (fi, this_cache, movm_args); return addr; } } /* Next we should allocate the local frame. No more prologue insns are found after allocating the local frame. Search for add imm8,sp (0xf8feXX) or add imm16,sp (0xfafeXXXX) or add imm32,sp (0xfcfeXXXXXXXX). If none of the above was found, then this prologue has no additional stack. */ imm_size = 0; if (buf[0] == 0xf8 && buf[1] == 0xfe) imm_size = 1; else if (buf[0] == 0xfa && buf[1] == 0xfe) imm_size = 2; else if (buf[0] == 0xfc && buf[1] == 0xfe) imm_size = 4; if (imm_size != 0) { /* Suck in imm_size more bytes, they'll hold the size of the current frame. */ status = deprecated_read_memory_nobpt (addr + 2, buf, imm_size); if (status != 0) { /* Fix fi->frame if it's bogus at this point. */ fix_frame_pointer (fi, 0); /* Note if/where callee saved registers were saved. */ set_movm_offsets (fi, this_cache, movm_args); return addr; } /* Note the size of the stack in the frame info structure. */ stack_size = extract_signed_integer (buf, imm_size); if (fi) set_my_stack_size (fi, stack_size); /* We just consumed 2 + imm_size bytes. */ addr += 2 + imm_size; /* No more prologue insns follow, so begin preparation to return. */ /* Fix fi->frame if it's bogus at this point. */ fix_frame_pointer (fi, stack_size); /* Note if/where callee saved registers were saved. */ set_movm_offsets (fi, this_cache, movm_args); return addr; } /* We never found an insn which allocates local stack space, regardless this is the end of the prologue. */ /* Fix fi->frame if it's bogus at this point. */ fix_frame_pointer (fi, 0); /* Note if/where callee saved registers were saved. */ set_movm_offsets (fi, this_cache, movm_args); return addr; }