/* Target-dependent code for the Mitsubishi m32r for GDB, the GNU debugger. Copyright 1996, Free Software Foundation, Inc. This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include "defs.h" #include "frame.h" #include "inferior.h" #include "obstack.h" #include "target.h" #include "value.h" #include "bfd.h" #include "gdb_string.h" #include "gdbcore.h" #include "symfile.h" /* Function: frame_find_saved_regs Return the frame_saved_regs structure for the frame. Doesn't really work for dummy frames, but it does pass back an empty frame_saved_regs, so I guess that's better than total failure */ void m32r_frame_find_saved_regs PARAMS ((struct frame_info *fi, struct frame_saved_regs *regaddr)) { memcpy(regaddr, &fi->fsr, sizeof(struct frame_saved_regs)); } /* Function: skip_prologue Find end of function prologue */ CORE_ADDR m32r_skip_prologue (pc) CORE_ADDR pc; { CORE_ADDR func_addr, func_end; struct symtab_and_line sal; /* See what the symbol table says */ if (find_pc_partial_function (pc, NULL, &func_addr, &func_end)) { sal = find_pc_line (func_addr, 0); if (sal.line != 0 && sal.end < func_end) return sal.end; else /* Either there's no line info, or the line after the prologue is after the end of the function. In this case, there probably isn't a prologue. */ return pc; } /* We can't find the start of this function, so there's nothing we can do. */ return pc; } /* Function: scan_prologue This function decodes the target function prologue to determine 1) the size of the stack frame, and 2) which registers are saved on it. It saves the offsets of saved regs in the frame_saved_regs argument, and returns the frame size. */ static unsigned long m32r_scan_prologue (fi, fsr) struct frame_info *fi; struct frame_saved_regs *fsr; { struct symtab_and_line sal; CORE_ADDR prologue_start, prologue_end, current_pc; unsigned long framesize; /* this code essentially duplicates skip_prologue, but we need the start address below. */ if (find_pc_partial_function (fi->pc, NULL, &prologue_start, &prologue_end)) { sal = find_pc_line (prologue_start, 0); if (sal.line == 0) /* no line info, use current PC */ if (prologue_start != entry_point_address ()) prologue_end = fi->pc; else return 0; /* _start has no frame or prologue */ else if (sal.end < prologue_end) /* next line begins after fn end */ prologue_end = sal.end; /* (probably means no prologue) */ } else prologue_end = prologue_start + 40; /* We're in the boondocks: allow for */ /* 16 pushes, an add, and "mv fp,sp" */ prologue_end = min (prologue_end, fi->pc); /* Now, search the prologue looking for instructions that setup fp, save rp (and other regs), adjust sp and such. */ framesize = 0; for (current_pc = prologue_start; current_pc < prologue_end; current_pc += 2) { int insn; int regno; insn = read_memory_unsigned_integer (current_pc, 2); if (insn & 0x8000) /* Four byte instruction? */ current_pc += 2; if ((insn & 0xf0ff) == 0x207f) { /* st reg, @-sp */ framesize += 4; regno = ((insn >> 8) & 0xf); if (fsr) /* save_regs offset */ fsr->regs[regno] = framesize; } else if ((insn >> 8) == 0x4f) /* addi sp, xx */ /* add 8 bit sign-extended offset */ framesize += -((char) (insn & 0xff)); else if (insn == 0x8faf) /* add3 sp, sp, xxxx */ /* add 16 bit sign-extended offset */ framesize += -((short) read_memory_unsigned_integer (current_pc, 2)); else if (((insn >> 8) == 0xe4) && /* ld24 r4, xxxxxx ; sub sp, r4 */ read_memory_unsigned_integer (current_pc + 2, 2) == 0x0f24) { /* subtract 24 bit sign-extended negative-offset */ insn = read_memory_unsigned_integer (current_pc - 2, 4); if (insn & 0x00800000) /* sign extend */ insn |= 0xff000000; /* negative */ else insn &= 0x00ffffff; /* positive */ framesize += insn; } else if (insn == 0x1d8f) { /* mv fp, sp */ fi->using_frame_pointer = 1; /* fp is now valid */ break; /* end of stack adjustments */ } else break; /* anything else isn't prologue */ } return framesize; } /* Function: init_extra_frame_info This function actually figures out the frame address for a given pc and sp. This is tricky on the m32r because we sometimes don't use an explicit frame pointer, and the previous stack pointer isn't necessarily recorded on the stack. The only reliable way to get this info is to examine the prologue. */ void m32r_init_extra_frame_info (fi) struct frame_info *fi; { int reg; if (fi->next) fi->pc = FRAME_SAVED_PC (fi->next); memset (fi->fsr.regs, '\000', sizeof fi->fsr.regs); if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame)) { /* We need to setup fi->frame here because run_stack_dummy gets it wrong by assuming it's always FP. */ fi->frame = generic_read_register_dummy (fi->pc, fi->frame, SP_REGNUM); fi->framesize = 0; return; } else { fi->using_frame_pointer = 0; fi->framesize = m32r_scan_prologue (fi, &fi->fsr); if (!fi->next) if (fi->using_frame_pointer) fi->frame = read_register (FP_REGNUM); else fi->frame = read_register (SP_REGNUM); else /* fi->next means this is not the innermost frame */ if (fi->using_frame_pointer) /* we have an FP */ if (fi->next->fsr.regs[FP_REGNUM] != 0) /* caller saved our FP */ fi->frame = read_memory_integer (fi->next->fsr.regs[FP_REGNUM], 4); for (reg = 0; reg < NUM_REGS; reg++) if (fi->fsr.regs[reg] != 0) fi->fsr.regs[reg] = fi->frame + fi->framesize - fi->fsr.regs[reg]; } } /* Function: find_callers_reg Find REGNUM on the stack. Otherwise, it's in an active register. One thing we might want to do here is to check REGNUM against the clobber mask, and somehow flag it as invalid if it isn't saved on the stack somewhere. This would provide a graceful failure mode when trying to get the value of caller-saves registers for an inner frame. */ CORE_ADDR m32r_find_callers_reg (fi, regnum) struct frame_info *fi; int regnum; { for (; fi; fi = fi->next) if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame)) return generic_read_register_dummy (fi->pc, fi->frame, regnum); else if (fi->fsr.regs[regnum] != 0) return read_memory_integer (fi->fsr.regs[regnum], REGISTER_RAW_SIZE(regnum)); return read_register (regnum); } /* Function: frame_chain Given a GDB frame, determine the address of the calling function's frame. This will be used to create a new GDB frame struct, and then INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC will be called for the new frame. For m32r, we save the frame size when we initialize the frame_info. */ CORE_ADDR m32r_frame_chain (fi) struct frame_info *fi; { CORE_ADDR fn_start, callers_pc, fp; /* is this a dummy frame? */ if (PC_IN_CALL_DUMMY(fi->pc, fi->frame, fi->frame)) return fi->frame; /* dummy frame same as caller's frame */ /* is caller-of-this a dummy frame? */ callers_pc = FRAME_SAVED_PC(fi); /* find out who called us: */ fp = m32r_find_callers_reg (fi, FP_REGNUM); if (PC_IN_CALL_DUMMY(callers_pc, fp, fp)) return fp; /* dummy frame's frame may bear no relation to ours */ if (find_pc_partial_function (fi->pc, 0, &fn_start, 0)) if (fn_start == entry_point_address ()) return 0; /* in _start fn, don't chain further */ return fi->frame + fi->framesize; } /* Function: push_return_address (pc) Set up the return address for the inferior function call. Necessary for targets that don't actually execute a JSR/BSR instruction (ie. when using an empty CALL_DUMMY) */ CORE_ADDR m32r_push_return_address (pc, sp) CORE_ADDR pc; CORE_ADDR sp; { #if CALL_DUMMY_LOCATION != AT_ENTRY_POINT pc = pc - CALL_DUMMY_START_OFFSET + CALL_DUMMY_BREAKPOINT_OFFSET; #else pc = CALL_DUMMY_ADDRESS (); #endif write_register (RP_REGNUM, pc); return sp; } /* Function: pop_frame Discard from the stack the innermost frame, restoring all saved registers. */ struct frame_info * m32r_pop_frame (frame) struct frame_info *frame; { int regnum; if (PC_IN_CALL_DUMMY (frame->pc, frame->frame, frame->frame)) generic_pop_dummy_frame (); else { for (regnum = 0; regnum < NUM_REGS; regnum++) if (frame->fsr.regs[regnum] != 0) write_register (regnum, read_memory_integer (frame->fsr.regs[regnum], 4)); write_register (PC_REGNUM, FRAME_SAVED_PC (frame)); write_register (SP_REGNUM, read_register (FP_REGNUM)); if (read_register (PSW_REGNUM) & 0x80) write_register (SPU_REGNUM, read_register (SP_REGNUM)); else write_register (SPI_REGNUM, read_register (SP_REGNUM)); } flush_cached_frames (); return NULL; } /* Function: frame_saved_pc Find the caller of this frame. We do this by seeing if RP_REGNUM is saved in the stack anywhere, otherwise we get it from the registers. */ CORE_ADDR m32r_frame_saved_pc (fi) struct frame_info *fi; { if (PC_IN_CALL_DUMMY(fi->pc, fi->frame, fi->frame)) return generic_read_register_dummy(fi->pc, fi->frame, PC_REGNUM); else return m32r_find_callers_reg (fi, RP_REGNUM); } /* Function: push_arguments Setup the function arguments for calling a function in the inferior. On the Mitsubishi M32R architecture, there are four registers (R0 to R3) which are dedicated for passing function arguments. Up to the first four arguments (depending on size) may go into these registers. The rest go on the stack. Arguments that are smaller than 4 bytes will still take up a whole register or a whole 32-bit word on the stack, and will be right-justified in the register or the stack word. This includes chars, shorts, and small aggregate types. Arguments of 8 bytes size are split between two registers, if available. If only one register is available, the argument will be split between the register and the stack. Otherwise it is passed entirely on the stack. Aggregate types with sizes between 4 and 8 bytes are passed entirely on the stack, and are left-justified within the double-word (as opposed to aggregates smaller than 4 bytes which are right-justified). Aggregates of greater than 8 bytes are first copied onto the stack, and then a pointer to the copy is passed in the place of the normal argument (either in a register if available, or on the stack). Functions that must return an aggregate type can return it in the normal return value registers (R0 and R1) if its size is 8 bytes or less. For larger return values, the caller must allocate space for the callee to copy the return value to. A pointer to this space is passed as an implicit first argument, always in R0. */ CORE_ADDR m32r_push_arguments (nargs, args, sp, struct_return, struct_addr) int nargs; value_ptr *args; CORE_ADDR sp; unsigned char struct_return; CORE_ADDR struct_addr; { int stack_offset, stack_alloc; int argreg; int argnum; struct type *type; CORE_ADDR regval; char *val; char valbuf[4]; int len; int odd_sized_struct; /* first force sp to a 4-byte alignment */ sp = sp & ~3; argreg = ARG0_REGNUM; /* The "struct return pointer" pseudo-argument goes in R0 */ if (struct_return) write_register (argreg++, struct_addr); /* Now make sure there's space on the stack */ for (argnum = 0, stack_alloc = 0; argnum < nargs; argnum++) stack_alloc += ((TYPE_LENGTH(VALUE_TYPE(args[argnum])) + 3) & ~3); sp -= stack_alloc; /* make room on stack for args */ /* Now load as many as possible of the first arguments into registers, and push the rest onto the stack. There are 16 bytes in four registers available. Loop thru args from first to last. */ argreg = ARG0_REGNUM; for (argnum = 0, stack_offset = 0; argnum < nargs; argnum++) { type = VALUE_TYPE (args[argnum]); len = TYPE_LENGTH (type); memset(valbuf, 0, sizeof(valbuf)); if (len < 4) { /* value gets right-justified in the register or stack word */ memcpy(valbuf + (4 - len), (char *) VALUE_CONTENTS (args[argnum]), len); val = valbuf; } else val = (char *) VALUE_CONTENTS (args[argnum]); if (len > 4 && (len & 3) != 0) odd_sized_struct = 1; /* such structs go entirely on stack */ else odd_sized_struct = 0; while (len > 0) { if (argreg > ARGLAST_REGNUM || odd_sized_struct) { /* must go on the stack */ write_memory (sp + stack_offset, val, 4); stack_offset += 4; } /* NOTE WELL!!!!! This is not an "else if" clause!!! That's because some *&^%$ things get passed on the stack AND in the registers! */ if (argreg <= ARGLAST_REGNUM) { /* there's room in a register */ regval = extract_address (val, REGISTER_RAW_SIZE(argreg)); write_register (argreg++, regval); } /* Store the value 4 bytes at a time. This means that things larger than 4 bytes may go partly in registers and partly on the stack. */ len -= REGISTER_RAW_SIZE(argreg); val += REGISTER_RAW_SIZE(argreg); } } return sp; } /* Function: fix_call_dummy If there is real CALL_DUMMY code (eg. on the stack), this function has the responsability to insert the address of the actual code that is the target of the target function call. */ int m32r_fix_call_dummy (dummy, pc, fun, nargs, args, type, gcc_p) char *dummy; CORE_ADDR pc; CORE_ADDR fun; int nargs; value_ptr *args; struct type *type; int gcc_p; { /* ld24 r8, <(imm24) fun> */ *(unsigned long *) (dummy) = (fun & 0x00ffffff) | 0xe8000000; } /* Function: get_saved_register Just call the generic_get_saved_register function. */ void get_saved_register (raw_buffer, optimized, addrp, frame, regnum, lval) char *raw_buffer; int *optimized; CORE_ADDR *addrp; struct frame_info *frame; int regnum; enum lval_type *lval; { generic_get_saved_register (raw_buffer, optimized, addrp, frame, regnum, lval); } /* Function: m32r_write_sp Because SP is really a read-only register that mirrors either SPU or SPI, we must actually write one of those two as well, depending on PSW. */ void m32r_write_sp (val) CORE_ADDR val; { unsigned long psw = read_register (PSW_REGNUM); if (psw & 0x80) /* stack mode: user or interrupt */ write_register (SPU_REGNUM, val); else write_register (SPI_REGNUM, val); write_register (SP_REGNUM, val); } void _initialize_m32r_tdep () { tm_print_insn = print_insn_m32r; }