/* Low level interface to ptrace, for GDB when running under Unix. Copyright 1986, 1987, 1989, 1991, 1992, 1995 Free Software Foundation, Inc. This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include "defs.h" #include "frame.h" #include "inferior.h" #include "command.h" #include "signals.h" #include "serial.h" #include "terminal.h" #include "target.h" #include "thread.h" #include "gdb_string.h" #include <signal.h> #include <fcntl.h> #if !defined (HAVE_TERMIOS) && !defined (HAVE_TERMIO) && !defined (HAVE_SGTTY) && !defined (__GO32__) && !defined(WIN32) #define HAVE_SGTTY #endif #if defined (HAVE_TERMIOS) #include <termios.h> #include <unistd.h> #endif #ifdef HAVE_TERMIOS #define PROCESS_GROUP_TYPE pid_t #endif #ifdef HAVE_SGTTY #ifdef SHORT_PGRP /* This is only used for the ultra. Does it have pid_t? */ #define PROCESS_GROUP_TYPE short #else #define PROCESS_GROUP_TYPE int #endif #endif /* sgtty */ static void kill_command PARAMS ((char *, int)); static void terminal_ours_1 PARAMS ((int)); /* Record terminal status separately for debugger and inferior. */ static serial_t stdin_serial; /* TTY state for the inferior. We save it whenever the inferior stops, and restore it when it resumes. */ static serial_ttystate inferior_ttystate; /* Our own tty state, which we restore every time we need to deal with the terminal. We only set it once, when GDB first starts. The settings of flags which readline saves and restores and unimportant. */ static serial_ttystate our_ttystate; /* fcntl flags for us and the inferior. Saved and restored just like {our,inferior}_ttystate. */ static int tflags_inferior; static int tflags_ours; #ifdef PROCESS_GROUP_TYPE /* Process group for us and the inferior. Saved and restored just like {our,inferior}_ttystate. */ PROCESS_GROUP_TYPE our_process_group; PROCESS_GROUP_TYPE inferior_process_group; #endif /* While the inferior is running, we want SIGINT and SIGQUIT to go to the inferior only. If we have job control, that takes care of it. If not, we save our handlers in these two variables and set SIGINT and SIGQUIT to SIG_IGN. */ static void (*sigint_ours) (); static void (*sigquit_ours) (); /* The name of the tty (from the `tty' command) that we gave to the inferior when it was last started. */ static char *inferior_thisrun_terminal; /* Nonzero if our terminal settings are in effect. Zero if the inferior's settings are in effect. Ignored if !gdb_has_a_terminal (). */ static int terminal_is_ours; enum {yes, no, have_not_checked} gdb_has_a_terminal_flag = have_not_checked; /* Does GDB have a terminal (on stdin)? */ int gdb_has_a_terminal () { switch (gdb_has_a_terminal_flag) { case yes: return 1; case no: return 0; case have_not_checked: /* Get all the current tty settings (including whether we have a tty at all!). Can't do this in _initialize_inflow because SERIAL_FDOPEN won't work until the serial_ops_list is initialized. */ #ifdef F_GETFL tflags_ours = fcntl (0, F_GETFL, 0); #endif gdb_has_a_terminal_flag = no; stdin_serial = SERIAL_FDOPEN (0); if (stdin_serial != NULL) { our_ttystate = SERIAL_GET_TTY_STATE (stdin_serial); if (our_ttystate != NULL) { gdb_has_a_terminal_flag = yes; #ifdef HAVE_TERMIOS our_process_group = tcgetpgrp (0); #endif #ifdef HAVE_SGTTY ioctl (0, TIOCGPGRP, &our_process_group); #endif } } return gdb_has_a_terminal_flag == yes; default: /* "Can't happen". */ return 0; } } /* Macro for printing errors from ioctl operations */ #define OOPSY(what) \ if (result == -1) \ fprintf_unfiltered(gdb_stderr, "[%s failed in terminal_inferior: %s]\n", \ what, strerror (errno)) static void terminal_ours_1 PARAMS ((int)); /* Initialize the terminal settings we record for the inferior, before we actually run the inferior. */ void terminal_init_inferior () { if (gdb_has_a_terminal ()) { /* We could just as well copy our_ttystate (if we felt like adding a new function SERIAL_COPY_TTY_STATE). */ if (inferior_ttystate) free (inferior_ttystate); inferior_ttystate = SERIAL_GET_TTY_STATE (stdin_serial); #ifdef PROCESS_GROUP_TYPE #ifdef PIDGET /* This is for Lynx, and should be cleaned up by having Lynx be a separate debugging target with a version of target_terminal_init_inferior which passes in the process group to a generic routine which does all the work (and the non-threaded child_terminal_init_inferior can just pass in inferior_pid to the same routine). */ inferior_process_group = PIDGET (inferior_pid); #else inferior_process_group = inferior_pid; #endif #endif /* Make sure that next time we call terminal_inferior (which will be before the program runs, as it needs to be), we install the new process group. */ terminal_is_ours = 1; } } /* Put the inferior's terminal settings into effect. This is preparation for starting or resuming the inferior. */ void terminal_inferior () { if (gdb_has_a_terminal () && terminal_is_ours && inferior_thisrun_terminal == 0) { int result; #ifdef F_GETFL /* Is there a reason this is being done twice? It happens both places we use F_SETFL, so I'm inclined to think perhaps there is some reason, however perverse. Perhaps not though... */ result = fcntl (0, F_SETFL, tflags_inferior); result = fcntl (0, F_SETFL, tflags_inferior); OOPSY ("fcntl F_SETFL"); #endif /* Because we were careful to not change in or out of raw mode in terminal_ours, we will not change in our out of raw mode with this call, so we don't flush any input. */ result = SERIAL_SET_TTY_STATE (stdin_serial, inferior_ttystate); OOPSY ("setting tty state"); if (!job_control) { sigint_ours = (void (*) ()) signal (SIGINT, SIG_IGN); sigquit_ours = (void (*) ()) signal (SIGQUIT, SIG_IGN); } /* If attach_flag is set, we don't know whether we are sharing a terminal with the inferior or not. (attaching a process without a terminal is one case where we do not; attaching a process which we ran from the same shell as GDB via `&' is one case where we do, I think (but perhaps this is not `sharing' in the sense that we need to save and restore tty state)). I don't know if there is any way to tell whether we are sharing a terminal. So what we do is to go through all the saving and restoring of the tty state, but ignore errors setting the process group, which will happen if we are not sharing a terminal). */ if (job_control) { #ifdef HAVE_TERMIOS result = tcsetpgrp (0, inferior_process_group); if (!attach_flag) OOPSY ("tcsetpgrp"); #endif #ifdef HAVE_SGTTY result = ioctl (0, TIOCSPGRP, &inferior_process_group); if (!attach_flag) OOPSY ("TIOCSPGRP"); #endif } } terminal_is_ours = 0; } /* Put some of our terminal settings into effect, enough to get proper results from our output, but do not change into or out of RAW mode so that no input is discarded. After doing this, either terminal_ours or terminal_inferior should be called to get back to a normal state of affairs. */ void terminal_ours_for_output () { terminal_ours_1 (1); } /* Put our terminal settings into effect. First record the inferior's terminal settings so they can be restored properly later. */ void terminal_ours () { terminal_ours_1 (0); } /* output_only is not used, and should not be used unless we introduce separate terminal_is_ours and terminal_is_ours_for_output flags. */ static void terminal_ours_1 (output_only) int output_only; { /* Checking inferior_thisrun_terminal is necessary so that if GDB is running in the background, it won't block trying to do the ioctl()'s below. Checking gdb_has_a_terminal avoids attempting all the ioctl's when running in batch. */ if (inferior_thisrun_terminal != 0 || gdb_has_a_terminal () == 0) return; if (!terminal_is_ours) { /* Ignore this signal since it will happen when we try to set the pgrp. */ void (*osigttou) (); int result; terminal_is_ours = 1; #ifdef SIGTTOU if (job_control) osigttou = (void (*) ()) signal (SIGTTOU, SIG_IGN); #endif if (inferior_ttystate) free (inferior_ttystate); inferior_ttystate = SERIAL_GET_TTY_STATE (stdin_serial); #ifdef HAVE_TERMIOS inferior_process_group = tcgetpgrp (0); #endif #ifdef HAVE_SGTTY ioctl (0, TIOCGPGRP, &inferior_process_group); #endif /* Here we used to set ICANON in our ttystate, but I believe this was an artifact from before when we used readline. Readline sets the tty state when it needs to. FIXME-maybe: However, query() expects non-raw mode and doesn't use readline. Maybe query should use readline (on the other hand, this only matters for HAVE_SGTTY, not termio or termios, I think). */ /* Set tty state to our_ttystate. We don't change in our out of raw mode, to avoid flushing input. We need to do the same thing regardless of output_only, because we don't have separate terminal_is_ours and terminal_is_ours_for_output flags. It's OK, though, since readline will deal with raw mode when/if it needs to. */ SERIAL_NOFLUSH_SET_TTY_STATE (stdin_serial, our_ttystate, inferior_ttystate); if (job_control) { #ifdef HAVE_TERMIOS result = tcsetpgrp (0, our_process_group); #if 0 /* This fails on Ultrix with EINVAL if you run the testsuite in the background with nohup, and then log out. GDB never used to check for an error here, so perhaps there are other such situations as well. */ if (result == -1) fprintf_unfiltered (gdb_stderr, "[tcsetpgrp failed in terminal_ours: %s]\n", strerror (errno)); #endif #endif /* termios */ #ifdef HAVE_SGTTY result = ioctl (0, TIOCSPGRP, &our_process_group); #endif } #ifdef SIGTTOU if (job_control) signal (SIGTTOU, osigttou); #endif if (!job_control) { signal (SIGINT, sigint_ours); signal (SIGQUIT, sigquit_ours); } #ifdef F_GETFL tflags_inferior = fcntl (0, F_GETFL, 0); /* Is there a reason this is being done twice? It happens both places we use F_SETFL, so I'm inclined to think perhaps there is some reason, however perverse. Perhaps not though... */ result = fcntl (0, F_SETFL, tflags_ours); result = fcntl (0, F_SETFL, tflags_ours); #endif result = result; /* lint */ } } /* ARGSUSED */ void term_info (arg, from_tty) char *arg; int from_tty; { target_terminal_info (arg, from_tty); } /* ARGSUSED */ void child_terminal_info (args, from_tty) char *args; int from_tty; { if (!gdb_has_a_terminal ()) { printf_filtered ("This GDB does not control a terminal.\n"); return; } printf_filtered ("Inferior's terminal status (currently saved by GDB):\n"); /* First the fcntl flags. */ { int flags; flags = tflags_inferior; printf_filtered ("File descriptor flags = "); #ifndef O_ACCMODE #define O_ACCMODE (O_RDONLY | O_WRONLY | O_RDWR) #endif /* (O_ACCMODE) parens are to avoid Ultrix header file bug */ switch (flags & (O_ACCMODE)) { case O_RDONLY: printf_filtered ("O_RDONLY"); break; case O_WRONLY: printf_filtered ("O_WRONLY"); break; case O_RDWR: printf_filtered ("O_RDWR"); break; } flags &= ~(O_ACCMODE); #ifdef O_NONBLOCK if (flags & O_NONBLOCK) printf_filtered (" | O_NONBLOCK"); flags &= ~O_NONBLOCK; #endif #if defined (O_NDELAY) /* If O_NDELAY and O_NONBLOCK are defined to the same thing, we will print it as O_NONBLOCK, which is good cause that is what POSIX has, and the flag will already be cleared by the time we get here. */ if (flags & O_NDELAY) printf_filtered (" | O_NDELAY"); flags &= ~O_NDELAY; #endif if (flags & O_APPEND) printf_filtered (" | O_APPEND"); flags &= ~O_APPEND; #if defined (O_BINARY) if (flags & O_BINARY) printf_filtered (" | O_BINARY"); flags &= ~O_BINARY; #endif if (flags) printf_filtered (" | 0x%x", flags); printf_filtered ("\n"); } #ifdef PROCESS_GROUP_TYPE printf_filtered ("Process group = %d\n", inferior_process_group); #endif SERIAL_PRINT_TTY_STATE (stdin_serial, inferior_ttystate); } /* NEW_TTY_PREFORK is called before forking a new child process, so we can record the state of ttys in the child to be formed. TTYNAME is null if we are to share the terminal with gdb; or points to a string containing the name of the desired tty. NEW_TTY is called in new child processes under Unix, which will become debugger target processes. This actually switches to the terminal specified in the NEW_TTY_PREFORK call. */ void new_tty_prefork (ttyname) char *ttyname; { /* Save the name for later, for determining whether we and the child are sharing a tty. */ inferior_thisrun_terminal = ttyname; } void new_tty () { register int tty; if (inferior_thisrun_terminal == 0) return; #if !defined(__GO32__) && !defined(WIN32) #ifdef TIOCNOTTY /* Disconnect the child process from our controlling terminal. On some systems (SVR4 for example), this may cause a SIGTTOU, so temporarily ignore SIGTTOU. */ tty = open("/dev/tty", O_RDWR); if (tty > 0) { void (*osigttou) (); osigttou = (void (*)()) signal(SIGTTOU, SIG_IGN); ioctl(tty, TIOCNOTTY, 0); close(tty); signal(SIGTTOU, osigttou); } #endif /* Now open the specified new terminal. */ #ifdef USE_O_NOCTTY tty = open(inferior_thisrun_terminal, O_RDWR | O_NOCTTY); #else tty = open(inferior_thisrun_terminal, O_RDWR); #endif if (tty == -1) { print_sys_errmsg (inferior_thisrun_terminal, errno); _exit(1); } /* Avoid use of dup2; doesn't exist on all systems. */ if (tty != 0) { close (0); dup (tty); } if (tty != 1) { close (1); dup (tty); } if (tty != 2) { close (2); dup (tty); } if (tty > 2) close(tty); #endif /* !go32 && !win32*/ } /* Kill the inferior process. Make us have no inferior. */ /* ARGSUSED */ static void kill_command (arg, from_tty) char *arg; int from_tty; { /* FIXME: This should not really be inferior_pid (or target_has_execution). It should be a distinct flag that indicates that a target is active, cuz some targets don't have processes! */ if (inferior_pid == 0) error ("The program is not being run."); if (!query ("Kill the program being debugged? ")) error ("Not confirmed."); target_kill (); init_thread_list(); /* Destroy thread info */ /* Killing off the inferior can leave us with a core file. If so, print the state we are left in. */ if (target_has_stack) { printf_filtered ("In %s,\n", target_longname); if (selected_frame == NULL) fputs_filtered ("No selected stack frame.\n", gdb_stdout); else print_stack_frame (selected_frame, selected_frame_level, 1); } } /* Call set_sigint_trap when you need to pass a signal on to an attached process when handling SIGINT */ /* ARGSUSED */ static void pass_signal (signo) int signo; { kill (inferior_pid, SIGINT); } static void (*osig)(); void set_sigint_trap() { if (attach_flag || inferior_thisrun_terminal) { osig = (void (*) ()) signal (SIGINT, pass_signal); } } void clear_sigint_trap() { if (attach_flag || inferior_thisrun_terminal) { signal (SIGINT, osig); } } #if defined (SIGIO) && defined (FASYNC) && defined (FD_SET) && defined (F_SETOWN) static void (*old_sigio) (); static void handle_sigio (signo) int signo; { int numfds; fd_set readfds; signal (SIGIO, handle_sigio); FD_ZERO (&readfds); FD_SET (target_activity_fd, &readfds); numfds = select (target_activity_fd + 1, &readfds, NULL, NULL, NULL); if (numfds >= 0 && FD_ISSET (target_activity_fd, &readfds)) { if ((*target_activity_function) ()) kill (inferior_pid, SIGINT); } } static int old_fcntl_flags; void set_sigio_trap () { if (target_activity_function) { old_sigio = (void (*) ()) signal (SIGIO, handle_sigio); fcntl (target_activity_fd, F_SETOWN, getpid()); old_fcntl_flags = fcntl (target_activity_fd, F_GETFL, 0); fcntl (target_activity_fd, F_SETFL, old_fcntl_flags | FASYNC); } } void clear_sigio_trap () { if (target_activity_function) { signal (SIGIO, old_sigio); fcntl (target_activity_fd, F_SETFL, old_fcntl_flags); } } #else /* No SIGIO. */ void set_sigio_trap () { if (target_activity_function) abort (); } void clear_sigio_trap () { if (target_activity_function) abort (); } #endif /* No SIGIO. */ /* This is here because this is where we figure out whether we (probably) have job control. Just using job_control only does part of it because setpgid or setpgrp might not exist on a system without job control. It might be considered misplaced (on the other hand, process groups and job control are closely related to ttys). For a more clean implementation, in libiberty, put a setpgid which merely calls setpgrp and a setpgrp which does nothing (any system with job control will have one or the other). */ int gdb_setpgid () { int retval = 0; if (job_control) { #if defined (NEED_POSIX_SETPGID) || defined (HAVE_TERMIOS) /* Do all systems with termios have setpgid? I hope so. */ /* setpgid (0, 0) is supposed to work and mean the same thing as this, but on Ultrix 4.2A it fails with EPERM (and setpgid (getpid (), getpid ()) succeeds). */ retval = setpgid (getpid (), getpid ()); #else #if defined (TIOCGPGRP) #if defined(USG) && !defined(SETPGRP_ARGS) retval = setpgrp (); #else retval = setpgrp (getpid (), getpid ()); #endif /* USG */ #endif /* TIOCGPGRP. */ #endif /* NEED_POSIX_SETPGID */ } return retval; } void _initialize_inflow () { add_info ("terminal", term_info, "Print inferior's saved terminal status."); add_com ("kill", class_run, kill_command, "Kill execution of program being debugged."); inferior_pid = 0; terminal_is_ours = 1; /* OK, figure out whether we have job control. If neither termios nor sgtty (i.e. termio or go32), leave job_control 0. */ #if defined (HAVE_TERMIOS) /* Do all systems with termios have the POSIX way of identifying job control? I hope so. */ #ifdef _POSIX_JOB_CONTROL job_control = 1; #else job_control = sysconf (_SC_JOB_CONTROL); #endif #endif /* termios */ #ifdef HAVE_SGTTY #ifdef TIOCGPGRP job_control = 1; #else job_control = 0; #endif /* TIOCGPGRP */ #endif /* sgtty */ }