/* Variables that describe the inferior process running under GDB: Where it is, why it stopped, and how to step it. Copyright (C) 1986-2014 Free Software Foundation, Inc. This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #if !defined (INFERIOR_H) #define INFERIOR_H 1 struct target_waitstatus; struct frame_info; struct ui_file; struct type; struct gdbarch; struct regcache; struct ui_out; struct terminal_info; struct target_desc_info; #include "ptid.h" /* For bpstat. */ #include "breakpoint.h" /* For enum gdb_signal. */ #include "target.h" /* For struct frame_id. */ #include "frame.h" #include "progspace.h" #include "registry.h" struct infcall_suspend_state; struct infcall_control_state; extern struct infcall_suspend_state *save_infcall_suspend_state (void); extern struct infcall_control_state *save_infcall_control_state (void); extern void restore_infcall_suspend_state (struct infcall_suspend_state *); extern void restore_infcall_control_state (struct infcall_control_state *); extern struct cleanup *make_cleanup_restore_infcall_suspend_state (struct infcall_suspend_state *); extern struct cleanup *make_cleanup_restore_infcall_control_state (struct infcall_control_state *); extern void discard_infcall_suspend_state (struct infcall_suspend_state *); extern void discard_infcall_control_state (struct infcall_control_state *); extern struct regcache * get_infcall_suspend_state_regcache (struct infcall_suspend_state *); /* Save value of inferior_ptid so that it may be restored by a later call to do_cleanups(). Returns the struct cleanup pointer needed for later doing the cleanup. */ extern struct cleanup * save_inferior_ptid (void); extern void set_sigint_trap (void); extern void clear_sigint_trap (void); /* Set/get file name for default use for standard in/out in the inferior. */ extern void set_inferior_io_terminal (const char *terminal_name); extern const char *get_inferior_io_terminal (void); /* Collected pid, tid, etc. of the debugged inferior. When there's no inferior, ptid_get_pid (inferior_ptid) will be 0. */ extern ptid_t inferior_ptid; /* Are we simulating synchronous execution? This is used in async gdb to implement the 'run', 'continue' etc commands, which will not redisplay the prompt until the execution is actually over. */ extern int sync_execution; /* Inferior environment. */ extern void clear_proceed_status (void); extern void proceed (CORE_ADDR, enum gdb_signal, int); extern int sched_multi; /* When set, stop the 'step' command if we enter a function which has no line number information. The normal behavior is that we step over such function. */ extern int step_stop_if_no_debug; /* If set, the inferior should be controlled in non-stop mode. In this mode, each thread is controlled independently. Execution commands apply only to the selected thread by default, and stop events stop only the thread that had the event -- the other threads are kept running freely. */ extern int non_stop; /* When set (default), the target should attempt to disable the operating system's address space randomization feature when starting an inferior. */ extern int disable_randomization; extern void generic_mourn_inferior (void); extern CORE_ADDR unsigned_pointer_to_address (struct gdbarch *gdbarch, struct type *type, const gdb_byte *buf); extern void unsigned_address_to_pointer (struct gdbarch *gdbarch, struct type *type, gdb_byte *buf, CORE_ADDR addr); extern CORE_ADDR signed_pointer_to_address (struct gdbarch *gdbarch, struct type *type, const gdb_byte *buf); extern void address_to_signed_pointer (struct gdbarch *gdbarch, struct type *type, gdb_byte *buf, CORE_ADDR addr); extern void wait_for_inferior (void); extern void prepare_for_detach (void); extern void fetch_inferior_event (void *); extern void init_wait_for_inferior (void); extern void reopen_exec_file (void); /* The `resume' routine should only be called in special circumstances. Normally, use `proceed', which handles a lot of bookkeeping. */ extern void resume (int, enum gdb_signal); extern ptid_t user_visible_resume_ptid (int step); extern void insert_step_resume_breakpoint_at_sal (struct gdbarch *, struct symtab_and_line , struct frame_id); /* From misc files */ extern void default_print_registers_info (struct gdbarch *gdbarch, struct ui_file *file, struct frame_info *frame, int regnum, int all); extern void child_terminal_info (struct target_ops *self, const char *, int); extern void term_info (char *, int); extern void child_terminal_save_ours (struct target_ops *self); extern void child_terminal_ours (struct target_ops *self); extern void child_terminal_ours_for_output (struct target_ops *self); extern void child_terminal_inferior (struct target_ops *self); extern void child_terminal_init (struct target_ops *self); extern void child_terminal_init_with_pgrp (int pgrp); /* From fork-child.c */ extern int fork_inferior (char *, char *, char **, void (*)(void), void (*)(int), void (*)(void), char *, void (*)(const char *, char * const *, char * const *)); extern void startup_inferior (int); extern char *construct_inferior_arguments (int, char **); /* From infrun.c */ extern unsigned int debug_infrun; extern int stop_on_solib_events; extern void start_remote (int from_tty); extern void normal_stop (void); extern void print_stop_event (struct target_waitstatus *ws); extern int signal_stop_state (int); extern int signal_print_state (int); extern int signal_pass_state (int); extern int signal_stop_update (int, int); extern int signal_print_update (int, int); extern int signal_pass_update (int, int); extern void get_last_target_status(ptid_t *ptid, struct target_waitstatus *status); extern void follow_inferior_reset_breakpoints (void); void set_step_info (struct frame_info *frame, struct symtab_and_line sal); /* Clear the convenience variables associated with the exit of the inferior. Currently, those variables are $_exitcode and $_exitsignal. */ extern void clear_exit_convenience_vars (void); /* Returns true if we're trying to step past the instruction at ADDRESS in ASPACE. */ extern int stepping_past_instruction_at (struct address_space *aspace, CORE_ADDR address); /* From infcmd.c */ extern void post_create_inferior (struct target_ops *, int); extern void attach_command (char *, int); extern char *get_inferior_args (void); extern void set_inferior_args (char *); extern void set_inferior_args_vector (int, char **); extern void registers_info (char *, int); extern void continue_1 (int all_threads); extern void interrupt_target_1 (int all_threads); extern void delete_longjmp_breakpoint_cleanup (void *arg); extern void detach_command (char *, int); extern void notice_new_inferior (ptid_t, int, int); extern struct value *get_return_value (struct value *function, struct type *value_type); /* Whether to start up the debuggee under a shell. If startup-with-shell is set, GDB's "run" will attempt to start up the debuggee under a shell. This is in order for argument-expansion to occur. E.g., (gdb) run * The "*" gets expanded by the shell into a list of files. While this is a nice feature, it may be handy to bypass the shell in some cases. To disable this feature, do "set startup-with-shell false". The catch-exec traps expected during start-up will be one more if the target is started up with a shell. */ extern int startup_with_shell; /* Address at which inferior stopped. */ extern CORE_ADDR stop_pc; /* Nonzero if stopped due to completion of a stack dummy routine. */ extern enum stop_stack_kind stop_stack_dummy; /* Nonzero if program stopped due to a random (unexpected) signal in inferior process. */ extern int stopped_by_random_signal; /* STEP_OVER_ALL means step over all subroutine calls. STEP_OVER_UNDEBUGGABLE means step over calls to undebuggable functions. STEP_OVER_NONE means don't step over any subroutine calls. */ enum step_over_calls_kind { STEP_OVER_NONE, STEP_OVER_ALL, STEP_OVER_UNDEBUGGABLE }; /* Anything but NO_STOP_QUIETLY means we expect a trap and the caller will handle it themselves. STOP_QUIETLY is used when running in the shell before the child program has been exec'd and when running through shared library loading. STOP_QUIETLY_REMOTE is used when setting up a remote connection; it is like STOP_QUIETLY_NO_SIGSTOP except that there is no need to hide a signal. */ /* It is also used after attach, due to attaching to a process. This is a bit trickier. When doing an attach, the kernel stops the debuggee with a SIGSTOP. On newer GNU/Linux kernels (>= 2.5.61) the handling of SIGSTOP for a ptraced process has changed. Earlier versions of the kernel would ignore these SIGSTOPs, while now SIGSTOP is treated like any other signal, i.e. it is not muffled. If the gdb user does a 'continue' after the 'attach', gdb passes the global variable stop_signal (which stores the signal from the attach, SIGSTOP) to the ptrace(PTRACE_CONT,...) call. This is problematic, because the kernel doesn't ignore such SIGSTOP now. I.e. it is reported back to gdb, which in turn presents it back to the user. To avoid the problem, we use STOP_QUIETLY_NO_SIGSTOP, which allows gdb to clear the value of stop_signal after the attach, so that it is not passed back down to the kernel. */ enum stop_kind { NO_STOP_QUIETLY = 0, STOP_QUIETLY, STOP_QUIETLY_REMOTE, STOP_QUIETLY_NO_SIGSTOP }; /* Reverse execution. */ enum exec_direction_kind { EXEC_FORWARD, EXEC_REVERSE }; /* The current execution direction. This should only be set to enum exec_direction_kind values. It is only an int to make it compatible with make_cleanup_restore_integer. */ extern int execution_direction; /* Save register contents here when executing a "finish" command or are about to pop a stack dummy frame, if-and-only-if proceed_to_finish is set. Thus this contains the return value from the called function (assuming values are returned in a register). */ extern struct regcache *stop_registers; /* True if we are debugging displaced stepping. */ extern int debug_displaced; /* Dump LEN bytes at BUF in hex to FILE, followed by a newline. */ void displaced_step_dump_bytes (struct ui_file *file, const gdb_byte *buf, size_t len); struct displaced_step_closure *get_displaced_step_closure_by_addr (CORE_ADDR addr); /* Possible values for gdbarch_call_dummy_location. */ #define ON_STACK 1 #define AT_ENTRY_POINT 4 /* Number of traps that happen between exec'ing the shell to run an inferior and when we finally get to the inferior code, not counting the exec for the shell. This is 1 on most implementations. Overridden in nm.h files. */ #if !defined(START_INFERIOR_TRAPS_EXPECTED) #define START_INFERIOR_TRAPS_EXPECTED 1 #endif struct private_inferior; /* Inferior process specific part of `struct infcall_control_state'. Inferior thread counterpart is `struct thread_control_state'. */ struct inferior_control_state { /* See the definition of stop_kind above. */ enum stop_kind stop_soon; }; /* Inferior process specific part of `struct infcall_suspend_state'. Inferior thread counterpart is `struct thread_suspend_state'. */ #if 0 /* Currently unused and empty structures are not valid C. */ struct inferior_suspend_state { }; #endif /* GDB represents the state of each program execution with an object called an inferior. An inferior typically corresponds to a process but is more general and applies also to targets that do not have a notion of processes. Each run of an executable creates a new inferior, as does each attachment to an existing process. Inferiors have unique internal identifiers that are different from target process ids. Each inferior may in turn have multiple threads running in it. */ struct inferior { /* Pointer to next inferior in singly-linked list of inferiors. */ struct inferior *next; /* Convenient handle (GDB inferior id). Unique across all inferiors. */ int num; /* Actual target inferior id, usually, a process id. This matches the ptid_t.pid member of threads of this inferior. */ int pid; /* True if the PID was actually faked by GDB. */ int fake_pid_p; /* State of GDB control of inferior process execution. See `struct inferior_control_state'. */ struct inferior_control_state control; /* State of inferior process to restore after GDB is done with an inferior call. See `struct inferior_suspend_state'. */ #if 0 /* Currently unused and empty structures are not valid C. */ struct inferior_suspend_state suspend; #endif /* True if this was an auto-created inferior, e.g. created from following a fork; false, if this inferior was manually added by the user, and we should not attempt to prune it automatically. */ int removable; /* The address space bound to this inferior. */ struct address_space *aspace; /* The program space bound to this inferior. */ struct program_space *pspace; /* The arguments string to use when running. */ char *args; /* The size of elements in argv. */ int argc; /* The vector version of arguments. If ARGC is nonzero, then we must compute ARGS from this (via the target). This is always coming from main's argv and therefore should never be freed. */ char **argv; /* The name of terminal device to use for I/O. */ char *terminal; /* Environment to use for running inferior, in format described in environ.h. */ struct gdb_environ *environment; /* Nonzero if this child process was attached rather than forked. */ int attach_flag; /* If this inferior is a vfork child, then this is the pointer to its vfork parent, if GDB is still attached to it. */ struct inferior *vfork_parent; /* If this process is a vfork parent, this is the pointer to the child. Since a vfork parent is left frozen by the kernel until the child execs or exits, a process can only have one vfork child at a given time. */ struct inferior *vfork_child; /* True if this inferior should be detached when it's vfork sibling exits or execs. */ int pending_detach; /* True if this inferior is a vfork parent waiting for a vfork child not under our control to be done with the shared memory region, either by exiting or execing. */ int waiting_for_vfork_done; /* True if we're in the process of detaching from this inferior. */ int detaching; /* What is left to do for an execution command after any thread of this inferior stops. For continuations associated with a specific thread, see `struct thread_info'. */ struct continuation *continuations; /* Private data used by the target vector implementation. */ struct private_inferior *private; /* HAS_EXIT_CODE is true if the inferior exited with an exit code. In this case, the EXIT_CODE field is also valid. */ int has_exit_code; LONGEST exit_code; /* Default flags to pass to the symbol reading functions. These are used whenever a new objfile is created. The valid values come from enum symfile_add_flags. */ int symfile_flags; /* Info about an inferior's target description (if it's fetched; the user supplied description's filename, if any; etc.). */ struct target_desc_info *tdesc_info; /* The architecture associated with the inferior through the connection to the target. The architecture vector provides some information that is really a property of the inferior, accessed through a particular target: ptrace operations; the layout of certain RSP packets; the solib_ops vector; etc. To differentiate architecture accesses to per-inferior/target properties from per-thread/per-frame/per-objfile properties, accesses to per-inferior/target properties should be made through this gdbarch. */ struct gdbarch *gdbarch; /* Per inferior data-pointers required by other GDB modules. */ REGISTRY_FIELDS; }; /* Keep a registry of per-inferior data-pointers required by other GDB modules. */ DECLARE_REGISTRY (inferior); /* Create an empty inferior list, or empty the existing one. */ extern void init_inferior_list (void); /* Add an inferior to the inferior list, print a message that a new inferior is found, and return the pointer to the new inferior. Caller may use this pointer to initialize the private inferior data. */ extern struct inferior *add_inferior (int pid); /* Same as add_inferior, but don't print new inferior notifications to the CLI. */ extern struct inferior *add_inferior_silent (int pid); /* Delete an existing inferior list entry, due to inferior exit. */ extern void delete_inferior (int pid); extern void delete_inferior_1 (struct inferior *todel, int silent); /* Same as delete_inferior, but don't print new inferior notifications to the CLI. */ extern void delete_inferior_silent (int pid); /* Delete an existing inferior list entry, due to inferior detaching. */ extern void detach_inferior (int pid); extern void exit_inferior (int pid); extern void exit_inferior_silent (int pid); extern void exit_inferior_num_silent (int num); extern void inferior_appeared (struct inferior *inf, int pid); /* Get rid of all inferiors. */ extern void discard_all_inferiors (void); /* Translate the integer inferior id (GDB's homegrown id, not the system's) into a "pid" (which may be overloaded with extra inferior information). */ extern int gdb_inferior_id_to_pid (int); /* Translate a target 'pid' into the integer inferior id (GDB's homegrown id, not the system's). */ extern int pid_to_gdb_inferior_id (int pid); /* Boolean test for an already-known pid. */ extern int in_inferior_list (int pid); /* Boolean test for an already-known inferior id (GDB's homegrown id, not the system's). */ extern int valid_gdb_inferior_id (int num); /* Search function to lookup an inferior by target 'pid'. */ extern struct inferior *find_inferior_pid (int pid); /* Search function to lookup an inferior by GDB 'num'. */ extern struct inferior *find_inferior_id (int num); /* Find an inferior bound to PSPACE. */ extern struct inferior * find_inferior_for_program_space (struct program_space *pspace); /* Inferior iterator function. Calls a callback function once for each inferior, so long as the callback function returns false. If the callback function returns true, the iteration will end and the current inferior will be returned. This can be useful for implementing a search for a inferior with arbitrary attributes, or for applying some operation to every inferior. It is safe to delete the iterated inferior from the callback. */ extern struct inferior *iterate_over_inferiors (int (*) (struct inferior *, void *), void *); /* Returns true if the inferior list is not empty. */ extern int have_inferiors (void); /* Returns true if there are any live inferiors in the inferior list (not cores, not executables, real live processes). */ extern int have_live_inferiors (void); /* Return a pointer to the current inferior. It is an error to call this if there is no current inferior. */ extern struct inferior *current_inferior (void); extern void set_current_inferior (struct inferior *); extern struct cleanup *save_current_inferior (void); /* Traverse all inferiors. */ #define ALL_INFERIORS(I) \ for ((I) = inferior_list; (I); (I) = (I)->next) extern struct inferior *inferior_list; /* Prune away automatically added inferiors that aren't required anymore. */ extern void prune_inferiors (void); extern int number_of_inferiors (void); extern struct inferior *add_inferior_with_spaces (void); extern void update_observer_mode (void); extern void update_signals_program_target (void); extern void signal_catch_update (const unsigned int *); /* In some circumstances we allow a command to specify a numeric signal. The idea is to keep these circumstances limited so that users (and scripts) develop portable habits. For comparison, POSIX.2 `kill' requires that 1,2,3,6,9,14, and 15 work (and using a numeric signal at all is obsolescent. We are slightly more lenient and allow 1-15 which should match host signal numbers on most systems. Use of symbolic signal names is strongly encouraged. */ enum gdb_signal gdb_signal_from_command (int num); #endif /* !defined (INFERIOR_H) */