/* Memory-access and commands for "inferior" process, for GDB. Copyright (C) 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc. This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #include "defs.h" #include "arch-utils.h" #include #include "gdb_string.h" #include "symtab.h" #include "gdbtypes.h" #include "frame.h" #include "inferior.h" #include "environ.h" #include "value.h" #include "gdbcmd.h" #include "symfile.h" #include "gdbcore.h" #include "target.h" #include "language.h" #include "symfile.h" #include "objfiles.h" #include "completer.h" #include "ui-out.h" #include "event-top.h" #include "parser-defs.h" #include "regcache.h" #include "reggroups.h" #include "block.h" #include "solib.h" #include #include "gdb_assert.h" #include "observer.h" #include "target-descriptions.h" #include "user-regs.h" #include "exceptions.h" #include "cli/cli-decode.h" #include "gdbthread.h" #include "valprint.h" #include "inline-frame.h" #include "tracepoint.h" /* Functions exported for general use, in inferior.h: */ void all_registers_info (char *, int); void registers_info (char *, int); void nexti_command (char *, int); void stepi_command (char *, int); void continue_command (char *, int); void interrupt_target_command (char *args, int from_tty); /* Local functions: */ static void nofp_registers_info (char *, int); static void print_return_value (struct type *func_type, struct type *value_type); static void until_next_command (int); static void until_command (char *, int); static void path_info (char *, int); static void path_command (char *, int); static void unset_command (char *, int); static void float_info (char *, int); static void disconnect_command (char *, int); static void unset_environment_command (char *, int); static void set_environment_command (char *, int); static void environment_info (char *, int); static void program_info (char *, int); static void finish_command (char *, int); static void signal_command (char *, int); static void jump_command (char *, int); static void step_1 (int, int, char *); static void step_once (int skip_subroutines, int single_inst, int count, int thread); static void next_command (char *, int); static void step_command (char *, int); static void run_command (char *, int); static void run_no_args_command (char *args, int from_tty); static void go_command (char *line_no, int from_tty); static int strip_bg_char (char **); void _initialize_infcmd (void); #define ERROR_NO_INFERIOR \ if (!target_has_execution) error (_("The program is not being run.")); /* Scratch area where string containing arguments to give to the program will be stored by 'set args'. As soon as anything is stored, notice_args_set will move it into per-inferior storage. Arguments are separated by spaces. Empty string (pointer to '\0') means no args. */ static char *inferior_args_scratch; /* Scratch area where 'set inferior-tty' will store user-provided value. We'll immediate copy it into per-inferior storage. */ static char *inferior_io_terminal_scratch; /* Pid of our debugged inferior, or 0 if no inferior now. Since various parts of infrun.c test this to see whether there is a program being debugged it should be nonzero (currently 3 is used) for remote debugging. */ ptid_t inferior_ptid; /* Address at which inferior stopped. */ CORE_ADDR stop_pc; /* Flag indicating that a command has proceeded the inferior past the current breakpoint. */ int breakpoint_proceeded; /* Nonzero if stopped due to completion of a stack dummy routine. */ enum stop_stack_kind stop_stack_dummy; /* Nonzero if stopped due to a random (unexpected) signal in inferior process. */ int stopped_by_random_signal; /* Accessor routines. */ /* Set the io terminal for the current inferior. Ownership of TERMINAL_NAME is not transferred. */ void set_inferior_io_terminal (const char *terminal_name) { xfree (current_inferior ()->terminal); current_inferior ()->terminal = terminal_name ? xstrdup (terminal_name) : 0; } const char * get_inferior_io_terminal (void) { return current_inferior ()->terminal; } static void set_inferior_tty_command (char *args, int from_tty, struct cmd_list_element *c) { /* CLI has assigned the user-provided value to inferior_io_terminal_scratch. Now route it to current inferior. */ set_inferior_io_terminal (inferior_io_terminal_scratch); } static void show_inferior_tty_command (struct ui_file *file, int from_tty, struct cmd_list_element *c, const char *value) { /* Note that we ignore the passed-in value in favor of computing it directly. */ const char *inferior_io_terminal = get_inferior_io_terminal (); if (inferior_io_terminal == NULL) inferior_io_terminal = ""; fprintf_filtered (gdb_stdout, _("Terminal for future runs of program being debugged " "is \"%s\".\n"), inferior_io_terminal); } char * get_inferior_args (void) { if (current_inferior ()->argc != 0) { char *n; n = construct_inferior_arguments (current_inferior ()->argc, current_inferior ()->argv); set_inferior_args (n); xfree (n); } if (current_inferior ()->args == NULL) current_inferior ()->args = xstrdup (""); return current_inferior ()->args; } /* Set the arguments for the current inferior. Ownership of NEWARGS is not transferred. */ void set_inferior_args (char *newargs) { xfree (current_inferior ()->args); current_inferior ()->args = newargs ? xstrdup (newargs) : NULL; current_inferior ()->argc = 0; current_inferior ()->argv = 0; } void set_inferior_args_vector (int argc, char **argv) { current_inferior ()->argc = argc; current_inferior ()->argv = argv; } /* Notice when `set args' is run. */ static void set_args_command (char *args, int from_tty, struct cmd_list_element *c) { /* CLI has assigned the user-provided value to inferior_args_scratch. Now route it to current inferior. */ set_inferior_args (inferior_args_scratch); } /* Notice when `show args' is run. */ static void show_args_command (struct ui_file *file, int from_tty, struct cmd_list_element *c, const char *value) { /* Note that we ignore the passed-in value in favor of computing it directly. */ deprecated_show_value_hack (file, from_tty, c, get_inferior_args ()); } /* Compute command-line string given argument vector. This does the same shell processing as fork_inferior. */ char * construct_inferior_arguments (int argc, char **argv) { char *result; if (STARTUP_WITH_SHELL) { /* This holds all the characters considered special to the typical Unix shells. We include `^' because the SunOS /bin/sh treats it as a synonym for `|'. */ char *special = "\"!#$&*()\\|[]{}<>?'\"`~^; \t\n"; int i; int length = 0; char *out, *cp; /* We over-compute the size. It shouldn't matter. */ for (i = 0; i < argc; ++i) length += 3 * strlen (argv[i]) + 1 + 2 * (argv[i][0] == '\0'); result = (char *) xmalloc (length); out = result; for (i = 0; i < argc; ++i) { if (i > 0) *out++ = ' '; /* Need to handle empty arguments specially. */ if (argv[i][0] == '\0') { *out++ = '\''; *out++ = '\''; } else { for (cp = argv[i]; *cp; ++cp) { if (*cp == '\n') { /* A newline cannot be quoted with a backslash (it just disappears), only by putting it inside quotes. */ *out++ = '\''; *out++ = '\n'; *out++ = '\''; } else { if (strchr (special, *cp) != NULL) *out++ = '\\'; *out++ = *cp; } } } } *out = '\0'; } else { /* In this case we can't handle arguments that contain spaces, tabs, or newlines -- see breakup_args(). */ int i; int length = 0; for (i = 0; i < argc; ++i) { char *cp = strchr (argv[i], ' '); if (cp == NULL) cp = strchr (argv[i], '\t'); if (cp == NULL) cp = strchr (argv[i], '\n'); if (cp != NULL) error (_("can't handle command-line argument containing whitespace")); length += strlen (argv[i]) + 1; } result = (char *) xmalloc (length); result[0] = '\0'; for (i = 0; i < argc; ++i) { if (i > 0) strcat (result, " "); strcat (result, argv[i]); } } return result; } /* This function detects whether or not a '&' character (indicating background execution) has been added as *the last* of the arguments ARGS of a command. If it has, it removes it and returns 1. Otherwise it does nothing and returns 0. */ static int strip_bg_char (char **args) { char *p = NULL; p = strchr (*args, '&'); if (p) { if (p == (*args + strlen (*args) - 1)) { if (strlen (*args) > 1) { do p--; while (*p == ' ' || *p == '\t'); *(p + 1) = '\0'; } else *args = 0; return 1; } } return 0; } /* Common actions to take after creating any sort of inferior, by any means (running, attaching, connecting, et cetera). The target should be stopped. */ void post_create_inferior (struct target_ops *target, int from_tty) { /* Be sure we own the terminal in case write operations are performed. */ target_terminal_ours (); /* If the target hasn't taken care of this already, do it now. Targets which need to access registers during to_open, to_create_inferior, or to_attach should do it earlier; but many don't need to. */ target_find_description (); /* Now that we know the register layout, retrieve current PC. */ stop_pc = regcache_read_pc (get_current_regcache ()); if (exec_bfd) { /* Create the hooks to handle shared library load and unload events. */ #ifdef SOLIB_CREATE_INFERIOR_HOOK SOLIB_CREATE_INFERIOR_HOOK (PIDGET (inferior_ptid)); #else solib_create_inferior_hook (from_tty); #endif } /* If the solist is global across processes, there's no need to refetch it here. */ if (exec_bfd && !gdbarch_has_global_solist (target_gdbarch)) { /* Sometimes the platform-specific hook loads initial shared libraries, and sometimes it doesn't. If it doesn't FROM_TTY will be incorrectly 0 but such solib targets should be fixed anyway. If we made all the inferior hook methods consistent, this call could be removed. Call it only after the solib target has been initialized by solib_create_inferior_hook. */ #ifdef SOLIB_ADD SOLIB_ADD (NULL, 0, target, auto_solib_add); #else solib_add (NULL, 0, target, auto_solib_add); #endif } /* If the user sets watchpoints before execution having started, then she gets software watchpoints, because GDB can't know which target will end up being pushed, or if it supports hardware watchpoints or not. breakpoint_re_set takes care of promoting watchpoints to hardware watchpoints if possible, however, if this new inferior doesn't load shared libraries or we don't pull in symbols from any other source on this target/arch, breakpoint_re_set is never called. Call it now so that software watchpoints get a chance to be promoted to hardware watchpoints if the now pushed target supports hardware watchpoints. */ breakpoint_re_set (); observer_notify_inferior_created (target, from_tty); } /* Kill the inferior if already running. This function is designed to be called when we are about to start the execution of the program from the beginning. Ask the user to confirm that he wants to restart the program being debugged when FROM_TTY is non-null. */ static void kill_if_already_running (int from_tty) { if (! ptid_equal (inferior_ptid, null_ptid) && target_has_execution) { /* Bail out before killing the program if we will not be able to restart it. */ target_require_runnable (); if (from_tty && !query (_("The program being debugged has been started already.\n\ Start it from the beginning? "))) error (_("Program not restarted.")); target_kill (); } } /* Implement the "run" command. If TBREAK_AT_MAIN is set, then insert a temporary breakpoint at the begining of the main program before running the program. */ static void run_command_1 (char *args, int from_tty, int tbreak_at_main) { char *exec_file; struct cleanup *old_chain; ptid_t ptid; dont_repeat (); kill_if_already_running (from_tty); init_wait_for_inferior (); clear_breakpoint_hit_counts (); /* Clean up any leftovers from other runs. Some other things from this function should probably be moved into target_pre_inferior. */ target_pre_inferior (from_tty); /* The comment here used to read, "The exec file is re-read every time we do a generic_mourn_inferior, so we just have to worry about the symbol file." The `generic_mourn_inferior' function gets called whenever the program exits. However, suppose the program exits, and *then* the executable file changes? We need to check again here. Since reopen_exec_file doesn't do anything if the timestamp hasn't changed, I don't see the harm. */ reopen_exec_file (); reread_symbols (); /* Insert the temporary breakpoint if a location was specified. */ if (tbreak_at_main) tbreak_command (main_name (), 0); exec_file = (char *) get_exec_file (0); if (non_stop && !target_supports_non_stop ()) error (_("The target does not support running in non-stop mode.")); /* We keep symbols from add-symbol-file, on the grounds that the user might want to add some symbols before running the program (right?). But sometimes (dynamic loading where the user manually introduces the new symbols with add-symbol-file), the code which the symbols describe does not persist between runs. Currently the user has to manually nuke all symbols between runs if they want them to go away (PR 2207). This is probably reasonable. */ if (!args) { if (target_can_async_p ()) async_disable_stdin (); } else { int async_exec = strip_bg_char (&args); /* If we get a request for running in the bg but the target doesn't support it, error out. */ if (async_exec && !target_can_async_p ()) error (_("Asynchronous execution not supported on this target.")); /* If we don't get a request of running in the bg, then we need to simulate synchronous (fg) execution. */ if (!async_exec && target_can_async_p ()) { /* Simulate synchronous execution */ async_disable_stdin (); } /* If there were other args, beside '&', process them. */ if (args) set_inferior_args (args); } if (from_tty) { ui_out_field_string (uiout, NULL, "Starting program"); ui_out_text (uiout, ": "); if (exec_file) ui_out_field_string (uiout, "execfile", exec_file); ui_out_spaces (uiout, 1); /* We call get_inferior_args() because we might need to compute the value now. */ ui_out_field_string (uiout, "infargs", get_inferior_args ()); ui_out_text (uiout, "\n"); ui_out_flush (uiout); } /* We call get_inferior_args() because we might need to compute the value now. */ target_create_inferior (exec_file, get_inferior_args (), environ_vector (current_inferior ()->environment), from_tty); /* We're starting off a new process. When we get out of here, in non-stop mode, finish the state of all threads of that process, but leave other threads alone, as they may be stopped in internal events --- the frontend shouldn't see them as stopped. In all-stop, always finish the state of all threads, as we may be resuming more than just the new process. */ if (non_stop) ptid = pid_to_ptid (ptid_get_pid (inferior_ptid)); else ptid = minus_one_ptid; old_chain = make_cleanup (finish_thread_state_cleanup, &ptid); /* Pass zero for FROM_TTY, because at this point the "run" command has done its thing; now we are setting up the running program. */ post_create_inferior (¤t_target, 0); /* Start the target running. */ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_0, 0); /* Since there was no error, there's no need to finish the thread states here. */ discard_cleanups (old_chain); } static void run_command (char *args, int from_tty) { run_command_1 (args, from_tty, 0); } static void run_no_args_command (char *args, int from_tty) { set_inferior_args (""); } /* Start the execution of the program up until the beginning of the main program. */ static void start_command (char *args, int from_tty) { /* Some languages such as Ada need to search inside the program minimal symbols for the location where to put the temporary breakpoint before starting. */ if (!have_minimal_symbols ()) error (_("No symbol table loaded. Use the \"file\" command.")); /* Run the program until reaching the main procedure... */ run_command_1 (args, from_tty, 1); } static int proceed_thread_callback (struct thread_info *thread, void *arg) { /* We go through all threads individually instead of compressing into a single target `resume_all' request, because some threads may be stopped in internal breakpoints/events, or stopped waiting for its turn in the displaced stepping queue (that is, they are running && !executing). The target side has no idea about why the thread is stopped, so a `resume_all' command would resume too much. If/when GDB gains a way to tell the target `hold this thread stopped until I say otherwise', then we can optimize this. */ if (!is_stopped (thread->ptid)) return 0; switch_to_thread (thread->ptid); clear_proceed_status (); proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0); return 0; } void ensure_valid_thread (void) { if (ptid_equal (inferior_ptid, null_ptid) || is_exited (inferior_ptid)) error (_("\ Cannot execute this command without a live selected thread.")); } /* If the user is looking at trace frames, any resumption of execution is likely to mix up recorded and live target data. So simply disallow those commands. */ void ensure_not_tfind_mode (void) { if (get_traceframe_number () >= 0) error (_("\ Cannot execute this command while looking at trace frames.")); } void continue_1 (int all_threads) { ERROR_NO_INFERIOR; ensure_not_tfind_mode (); if (non_stop && all_threads) { /* Don't error out if the current thread is running, because there may be other stopped threads. */ struct cleanup *old_chain; /* Backup current thread and selected frame. */ old_chain = make_cleanup_restore_current_thread (); iterate_over_threads (proceed_thread_callback, NULL); /* Restore selected ptid. */ do_cleanups (old_chain); } else { ensure_valid_thread (); ensure_not_running (); clear_proceed_status (); proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0); } } /* continue [-a] [proceed-count] [&] */ void continue_command (char *args, int from_tty) { int async_exec = 0; int all_threads = 0; ERROR_NO_INFERIOR; /* Find out whether we must run in the background. */ if (args != NULL) async_exec = strip_bg_char (&args); /* If we must run in the background, but the target can't do it, error out. */ if (async_exec && !target_can_async_p ()) error (_("Asynchronous execution not supported on this target.")); /* If we are not asked to run in the bg, then prepare to run in the foreground, synchronously. */ if (!async_exec && target_can_async_p ()) { /* Simulate synchronous execution */ async_disable_stdin (); } if (args != NULL) { if (strncmp (args, "-a", sizeof ("-a") - 1) == 0) { all_threads = 1; args += sizeof ("-a") - 1; if (*args == '\0') args = NULL; } } if (!non_stop && all_threads) error (_("`-a' is meaningless in all-stop mode.")); if (args != NULL && all_threads) error (_("\ Can't resume all threads and specify proceed count simultaneously.")); /* If we have an argument left, set proceed count of breakpoint we stopped at. */ if (args != NULL) { bpstat bs = NULL; int num, stat; int stopped = 0; struct thread_info *tp; if (non_stop) tp = find_thread_ptid (inferior_ptid); else { ptid_t last_ptid; struct target_waitstatus ws; get_last_target_status (&last_ptid, &ws); tp = find_thread_ptid (last_ptid); } if (tp != NULL) bs = tp->stop_bpstat; while ((stat = bpstat_num (&bs, &num)) != 0) if (stat > 0) { set_ignore_count (num, parse_and_eval_long (args) - 1, from_tty); /* set_ignore_count prints a message ending with a period. So print two spaces before "Continuing.". */ if (from_tty) printf_filtered (" "); stopped = 1; } if (!stopped && from_tty) { printf_filtered ("Not stopped at any breakpoint; argument ignored.\n"); } } if (from_tty) printf_filtered (_("Continuing.\n")); continue_1 (all_threads); } /* Record the starting point of a "step" or "next" command. */ static void set_step_frame (void) { struct symtab_and_line sal; find_frame_sal (get_current_frame (), &sal); set_step_info (get_current_frame (), sal); } /* Step until outside of current statement. */ static void step_command (char *count_string, int from_tty) { step_1 (0, 0, count_string); } /* Likewise, but skip over subroutine calls as if single instructions. */ static void next_command (char *count_string, int from_tty) { step_1 (1, 0, count_string); } /* Likewise, but step only one instruction. */ void stepi_command (char *count_string, int from_tty) { step_1 (0, 1, count_string); } void nexti_command (char *count_string, int from_tty) { step_1 (1, 1, count_string); } static void delete_longjmp_breakpoint_cleanup (void *arg) { int thread = * (int *) arg; delete_longjmp_breakpoint (thread); } static void step_1 (int skip_subroutines, int single_inst, char *count_string) { int count = 1; struct frame_info *frame; struct cleanup *cleanups = make_cleanup (null_cleanup, NULL); int async_exec = 0; int thread = -1; ERROR_NO_INFERIOR; ensure_not_tfind_mode (); ensure_valid_thread (); ensure_not_running (); if (count_string) async_exec = strip_bg_char (&count_string); /* If we get a request for running in the bg but the target doesn't support it, error out. */ if (async_exec && !target_can_async_p ()) error (_("Asynchronous execution not supported on this target.")); /* If we don't get a request of running in the bg, then we need to simulate synchronous (fg) execution. */ if (!async_exec && target_can_async_p ()) { /* Simulate synchronous execution */ async_disable_stdin (); } count = count_string ? parse_and_eval_long (count_string) : 1; if (!single_inst || skip_subroutines) /* leave si command alone */ { if (in_thread_list (inferior_ptid)) thread = pid_to_thread_id (inferior_ptid); set_longjmp_breakpoint (thread); make_cleanup (delete_longjmp_breakpoint_cleanup, &thread); } /* In synchronous case, all is well; each step_once call will step once. */ if (!target_can_async_p ()) { for (; count > 0; count--) { struct thread_info *tp; step_once (skip_subroutines, single_inst, count, thread); if (target_has_execution && !ptid_equal (inferior_ptid, null_ptid)) tp = inferior_thread (); else tp = NULL; if (!tp || !tp->stop_step || !tp->step_multi) { /* If we stopped for some reason that is not stepping there are no further steps to make. */ if (tp) tp->step_multi = 0; break; } } do_cleanups (cleanups); } else { /* In the case of an asynchronous target things get complicated; do only one step for now, before returning control to the event loop. Let the continuation figure out how many other steps we need to do, and handle them one at the time, through step_once. */ step_once (skip_subroutines, single_inst, count, thread); /* We are running, and the continuation is installed. It will disable the longjmp breakpoint as appropriate. */ discard_cleanups (cleanups); } } struct step_1_continuation_args { int count; int skip_subroutines; int single_inst; int thread; }; /* Called after we are done with one step operation, to check whether we need to step again, before we print the prompt and return control to the user. If count is > 1, we will need to do one more call to proceed(), via step_once(). Basically it is like step_once and step_1_continuation are co-recursive. */ static void step_1_continuation (void *args) { struct step_1_continuation_args *a = args; if (target_has_execution) { struct thread_info *tp; tp = inferior_thread (); if (tp->step_multi && tp->stop_step) { /* There are more steps to make, and we did stop due to ending a stepping range. Do another step. */ step_once (a->skip_subroutines, a->single_inst, a->count - 1, a->thread); return; } tp->step_multi = 0; } /* We either stopped for some reason that is not stepping, or there are no further steps to make. Cleanup. */ if (!a->single_inst || a->skip_subroutines) delete_longjmp_breakpoint (a->thread); } /* Do just one step operation. This is useful to implement the 'step n' kind of commands. In case of asynchronous targets, we will have to set up a continuation to be done after the target stops (after this one step). For synch targets, the caller handles further stepping. */ static void step_once (int skip_subroutines, int single_inst, int count, int thread) { struct frame_info *frame = get_current_frame (); if (count > 0) { /* Don't assume THREAD is a valid thread id. It is set to -1 if the longjmp breakpoint was not required. Use the INFERIOR_PTID thread instead, which is the same thread when THREAD is set. */ struct thread_info *tp = inferior_thread (); clear_proceed_status (); set_step_frame (); if (!single_inst) { CORE_ADDR pc; /* Step at an inlined function behaves like "down". */ if (!skip_subroutines && !single_inst && inline_skipped_frames (inferior_ptid)) { step_into_inline_frame (inferior_ptid); if (count > 1) step_once (skip_subroutines, single_inst, count - 1, thread); else /* Pretend that we've stopped. */ normal_stop (); return; } pc = get_frame_pc (frame); find_pc_line_pc_range (pc, &tp->step_range_start, &tp->step_range_end); /* If we have no line info, switch to stepi mode. */ if (tp->step_range_end == 0 && step_stop_if_no_debug) tp->step_range_start = tp->step_range_end = 1; else if (tp->step_range_end == 0) { char *name; if (find_pc_partial_function (pc, &name, &tp->step_range_start, &tp->step_range_end) == 0) error (_("Cannot find bounds of current function")); target_terminal_ours (); printf_filtered (_("\ Single stepping until exit from function %s, \n\ which has no line number information.\n"), name); } } else { /* Say we are stepping, but stop after one insn whatever it does. */ tp->step_range_start = tp->step_range_end = 1; if (!skip_subroutines) /* It is stepi. Don't step over function calls, not even to functions lacking line numbers. */ tp->step_over_calls = STEP_OVER_NONE; } if (skip_subroutines) tp->step_over_calls = STEP_OVER_ALL; tp->step_multi = (count > 1); proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 1); /* For async targets, register a continuation to do any additional steps. For sync targets, the caller will handle further stepping. */ if (target_can_async_p ()) { struct step_1_continuation_args *args; args = xmalloc (sizeof (*args)); args->skip_subroutines = skip_subroutines; args->single_inst = single_inst; args->count = count; args->thread = thread; add_intermediate_continuation (tp, step_1_continuation, args, xfree); } } } /* Continue program at specified address. */ static void jump_command (char *arg, int from_tty) { struct gdbarch *gdbarch = get_current_arch (); CORE_ADDR addr; struct symtabs_and_lines sals; struct symtab_and_line sal; struct symbol *fn; struct symbol *sfn; int async_exec = 0; ERROR_NO_INFERIOR; ensure_not_tfind_mode (); ensure_valid_thread (); ensure_not_running (); /* Find out whether we must run in the background. */ if (arg != NULL) async_exec = strip_bg_char (&arg); /* If we must run in the background, but the target can't do it, error out. */ if (async_exec && !target_can_async_p ()) error (_("Asynchronous execution not supported on this target.")); if (!arg) error_no_arg (_("starting address")); sals = decode_line_spec_1 (arg, 1); if (sals.nelts != 1) { error (_("Unreasonable jump request")); } sal = sals.sals[0]; xfree (sals.sals); if (sal.symtab == 0 && sal.pc == 0) error (_("No source file has been specified.")); resolve_sal_pc (&sal); /* May error out */ /* See if we are trying to jump to another function. */ fn = get_frame_function (get_current_frame ()); sfn = find_pc_function (sal.pc); if (fn != NULL && sfn != fn) { if (!query (_("Line %d is not in `%s'. Jump anyway? "), sal.line, SYMBOL_PRINT_NAME (fn))) { error (_("Not confirmed.")); /* NOTREACHED */ } } if (sfn != NULL) { fixup_symbol_section (sfn, 0); if (section_is_overlay (SYMBOL_OBJ_SECTION (sfn)) && !section_is_mapped (SYMBOL_OBJ_SECTION (sfn))) { if (!query (_("WARNING!!! Destination is in unmapped overlay! Jump anyway? "))) { error (_("Not confirmed.")); /* NOTREACHED */ } } } addr = sal.pc; if (from_tty) { printf_filtered (_("Continuing at ")); fputs_filtered (paddress (gdbarch, addr), gdb_stdout); printf_filtered (".\n"); } /* If we are not asked to run in the bg, then prepare to run in the foreground, synchronously. */ if (!async_exec && target_can_async_p ()) { /* Simulate synchronous execution */ async_disable_stdin (); } clear_proceed_status (); proceed (addr, TARGET_SIGNAL_0, 0); } /* Go to line or address in current procedure */ static void go_command (char *line_no, int from_tty) { if (line_no == (char *) NULL || !*line_no) printf_filtered (_("Usage: go \n")); else { tbreak_command (line_no, from_tty); jump_command (line_no, from_tty); } } /* Continue program giving it specified signal. */ static void signal_command (char *signum_exp, int from_tty) { enum target_signal oursig; int async_exec = 0; dont_repeat (); /* Too dangerous. */ ERROR_NO_INFERIOR; ensure_not_tfind_mode (); ensure_valid_thread (); ensure_not_running (); /* Find out whether we must run in the background. */ if (signum_exp != NULL) async_exec = strip_bg_char (&signum_exp); /* If we must run in the background, but the target can't do it, error out. */ if (async_exec && !target_can_async_p ()) error (_("Asynchronous execution not supported on this target.")); /* If we are not asked to run in the bg, then prepare to run in the foreground, synchronously. */ if (!async_exec && target_can_async_p ()) { /* Simulate synchronous execution. */ async_disable_stdin (); } if (!signum_exp) error_no_arg (_("signal number")); /* It would be even slicker to make signal names be valid expressions, (the type could be "enum $signal" or some such), then the user could assign them to convenience variables. */ oursig = target_signal_from_name (signum_exp); if (oursig == TARGET_SIGNAL_UNKNOWN) { /* No, try numeric. */ int num = parse_and_eval_long (signum_exp); if (num == 0) oursig = TARGET_SIGNAL_0; else oursig = target_signal_from_command (num); } if (from_tty) { if (oursig == TARGET_SIGNAL_0) printf_filtered (_("Continuing with no signal.\n")); else printf_filtered (_("Continuing with signal %s.\n"), target_signal_to_name (oursig)); } clear_proceed_status (); proceed ((CORE_ADDR) -1, oursig, 0); } /* Proceed until we reach a different source line with pc greater than our current one or exit the function. We skip calls in both cases. Note that eventually this command should probably be changed so that only source lines are printed out when we hit the breakpoint we set. This may involve changes to wait_for_inferior and the proceed status code. */ static void until_next_command (int from_tty) { struct frame_info *frame; CORE_ADDR pc; struct symbol *func; struct symtab_and_line sal; struct thread_info *tp = inferior_thread (); clear_proceed_status (); set_step_frame (); frame = get_current_frame (); /* Step until either exited from this function or greater than the current line (if in symbolic section) or pc (if not). */ pc = get_frame_pc (frame); func = find_pc_function (pc); if (!func) { struct minimal_symbol *msymbol = lookup_minimal_symbol_by_pc (pc); if (msymbol == NULL) error (_("Execution is not within a known function.")); tp->step_range_start = SYMBOL_VALUE_ADDRESS (msymbol); tp->step_range_end = pc; } else { sal = find_pc_line (pc, 0); tp->step_range_start = BLOCK_START (SYMBOL_BLOCK_VALUE (func)); tp->step_range_end = sal.end; } tp->step_over_calls = STEP_OVER_ALL; tp->step_multi = 0; /* Only one call to proceed */ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 1); } static void until_command (char *arg, int from_tty) { int async_exec = 0; ERROR_NO_INFERIOR; ensure_not_tfind_mode (); ensure_valid_thread (); ensure_not_running (); /* Find out whether we must run in the background. */ if (arg != NULL) async_exec = strip_bg_char (&arg); /* If we must run in the background, but the target can't do it, error out. */ if (async_exec && !target_can_async_p ()) error (_("Asynchronous execution not supported on this target.")); /* If we are not asked to run in the bg, then prepare to run in the foreground, synchronously. */ if (!async_exec && target_can_async_p ()) { /* Simulate synchronous execution */ async_disable_stdin (); } if (arg) until_break_command (arg, from_tty, 0); else until_next_command (from_tty); } static void advance_command (char *arg, int from_tty) { int async_exec = 0; ERROR_NO_INFERIOR; ensure_not_tfind_mode (); ensure_valid_thread (); ensure_not_running (); if (arg == NULL) error_no_arg (_("a location")); /* Find out whether we must run in the background. */ if (arg != NULL) async_exec = strip_bg_char (&arg); /* If we must run in the background, but the target can't do it, error out. */ if (async_exec && !target_can_async_p ()) error (_("Asynchronous execution not supported on this target.")); /* If we are not asked to run in the bg, then prepare to run in the foreground, synchronously. */ if (!async_exec && target_can_async_p ()) { /* Simulate synchronous execution. */ async_disable_stdin (); } until_break_command (arg, from_tty, 1); } /* Print the result of a function at the end of a 'finish' command. */ static void print_return_value (struct type *func_type, struct type *value_type) { struct gdbarch *gdbarch = get_regcache_arch (stop_registers); struct cleanup *old_chain; struct ui_stream *stb; struct value *value; CHECK_TYPEDEF (value_type); gdb_assert (TYPE_CODE (value_type) != TYPE_CODE_VOID); /* FIXME: 2003-09-27: When returning from a nested inferior function call, it's possible (with no help from the architecture vector) to locate and return/print a "struct return" value. This is just a more complicated case of what is already being done in in the inferior function call code. In fact, when inferior function calls are made async, this will likely be made the norm. */ switch (gdbarch_return_value (gdbarch, func_type, value_type, NULL, NULL, NULL)) { case RETURN_VALUE_REGISTER_CONVENTION: case RETURN_VALUE_ABI_RETURNS_ADDRESS: case RETURN_VALUE_ABI_PRESERVES_ADDRESS: value = allocate_value (value_type); gdbarch_return_value (gdbarch, func_type, value_type, stop_registers, value_contents_raw (value), NULL); break; case RETURN_VALUE_STRUCT_CONVENTION: value = NULL; break; default: internal_error (__FILE__, __LINE__, _("bad switch")); } if (value) { struct value_print_options opts; /* Print it. */ stb = ui_out_stream_new (uiout); old_chain = make_cleanup_ui_out_stream_delete (stb); ui_out_text (uiout, "Value returned is "); ui_out_field_fmt (uiout, "gdb-result-var", "$%d", record_latest_value (value)); ui_out_text (uiout, " = "); get_raw_print_options (&opts); value_print (value, stb->stream, &opts); ui_out_field_stream (uiout, "return-value", stb); ui_out_text (uiout, "\n"); do_cleanups (old_chain); } else { ui_out_text (uiout, "Value returned has type: "); ui_out_field_string (uiout, "return-type", TYPE_NAME (value_type)); ui_out_text (uiout, "."); ui_out_text (uiout, " Cannot determine contents\n"); } } /* Stuff that needs to be done by the finish command after the target has stopped. In asynchronous mode, we wait for the target to stop in the call to poll or select in the event loop, so it is impossible to do all the stuff as part of the finish_command function itself. The only chance we have to complete this command is in fetch_inferior_event, which is called by the event loop as soon as it detects that the target has stopped. This function is called via the cmd_continuation pointer. */ struct finish_command_continuation_args { struct breakpoint *breakpoint; struct symbol *function; }; static void finish_command_continuation (void *arg) { struct finish_command_continuation_args *a = arg; struct thread_info *tp = NULL; bpstat bs = NULL; if (!ptid_equal (inferior_ptid, null_ptid) && target_has_execution && is_stopped (inferior_ptid)) { tp = inferior_thread (); bs = tp->stop_bpstat; } if (bpstat_find_breakpoint (bs, a->breakpoint) != NULL && a->function != NULL) { struct type *value_type; value_type = TYPE_TARGET_TYPE (SYMBOL_TYPE (a->function)); if (!value_type) internal_error (__FILE__, __LINE__, _("finish_command: function has no target type")); if (TYPE_CODE (value_type) != TYPE_CODE_VOID) { volatile struct gdb_exception ex; TRY_CATCH (ex, RETURN_MASK_ALL) { /* print_return_value can throw an exception in some circumstances. We need to catch this so that we still delete the breakpoint. */ print_return_value (SYMBOL_TYPE (a->function), value_type); } if (ex.reason < 0) exception_print (gdb_stdout, ex); } } /* We suppress normal call of normal_stop observer and do it here so that the *stopped notification includes the return value. */ if (bs != NULL && tp->proceed_to_finish) observer_notify_normal_stop (bs, 1 /* print frame */); delete_breakpoint (a->breakpoint); } static void finish_command_continuation_free_arg (void *arg) { xfree (arg); } /* finish_backward -- helper function for finish_command. */ static void finish_backward (struct symbol *function) { struct symtab_and_line sal; struct thread_info *tp = inferior_thread (); struct breakpoint *breakpoint; struct cleanup *old_chain; CORE_ADDR pc; CORE_ADDR func_addr; int back_up; pc = get_frame_pc (get_current_frame ()); if (find_pc_partial_function (pc, NULL, &func_addr, NULL) == 0) internal_error (__FILE__, __LINE__, _("Finish: couldn't find function.")); sal = find_pc_line (func_addr, 0); /* We don't need a return value. */ tp->proceed_to_finish = 0; /* Special case: if we're sitting at the function entry point, then all we need to do is take a reverse singlestep. We don't need to set a breakpoint, and indeed it would do us no good to do so. Note that this can only happen at frame #0, since there's no way that a function up the stack can have a return address that's equal to its entry point. */ if (sal.pc != pc) { struct frame_info *frame = get_selected_frame (NULL); struct gdbarch *gdbarch = get_frame_arch (frame); /* Set breakpoint and continue. */ breakpoint = set_momentary_breakpoint (gdbarch, sal, get_stack_frame_id (frame), bp_breakpoint); /* Tell the breakpoint to keep quiet. We won't be done until we've done another reverse single-step. */ make_breakpoint_silent (breakpoint); old_chain = make_cleanup_delete_breakpoint (breakpoint); proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0); /* We will be stopped when proceed returns. */ back_up = bpstat_find_breakpoint (tp->stop_bpstat, breakpoint) != NULL; do_cleanups (old_chain); } else back_up = 1; if (back_up) { /* If in fact we hit the step-resume breakpoint (and not some other breakpoint), then we're almost there -- we just need to back up by one more single-step. */ tp->step_range_start = tp->step_range_end = 1; proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 1); } return; } /* finish_forward -- helper function for finish_command. */ static void finish_forward (struct symbol *function, struct frame_info *frame) { struct gdbarch *gdbarch = get_frame_arch (frame); struct symtab_and_line sal; struct thread_info *tp = inferior_thread (); struct breakpoint *breakpoint; struct cleanup *old_chain; struct finish_command_continuation_args *cargs; sal = find_pc_line (get_frame_pc (frame), 0); sal.pc = get_frame_pc (frame); breakpoint = set_momentary_breakpoint (gdbarch, sal, get_stack_frame_id (frame), bp_finish); old_chain = make_cleanup_delete_breakpoint (breakpoint); tp->proceed_to_finish = 1; /* We want stop_registers, please... */ cargs = xmalloc (sizeof (*cargs)); cargs->breakpoint = breakpoint; cargs->function = function; add_continuation (tp, finish_command_continuation, cargs, finish_command_continuation_free_arg); proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0); discard_cleanups (old_chain); if (!target_can_async_p ()) do_all_continuations (); } /* "finish": Set a temporary breakpoint at the place the selected frame will return to, then continue. */ static void finish_command (char *arg, int from_tty) { struct frame_info *frame; struct symbol *function; int async_exec = 0; ERROR_NO_INFERIOR; ensure_not_tfind_mode (); ensure_valid_thread (); ensure_not_running (); /* Find out whether we must run in the background. */ if (arg != NULL) async_exec = strip_bg_char (&arg); /* If we must run in the background, but the target can't do it, error out. */ if (async_exec && !target_can_async_p ()) error (_("Asynchronous execution not supported on this target.")); /* Don't try to async in reverse. */ if (async_exec && execution_direction == EXEC_REVERSE) error (_("Asynchronous 'finish' not supported in reverse.")); /* If we are not asked to run in the bg, then prepare to run in the foreground, synchronously. */ if (!async_exec && target_can_async_p ()) { /* Simulate synchronous execution. */ async_disable_stdin (); } if (arg) error (_("The \"finish\" command does not take any arguments.")); frame = get_prev_frame (get_selected_frame (_("No selected frame."))); if (frame == 0) error (_("\"finish\" not meaningful in the outermost frame.")); clear_proceed_status (); /* Finishing from an inline frame is completely different. We don't try to show the "return value" - no way to locate it. So we do not need a completion. */ if (get_frame_type (get_selected_frame (_("No selected frame."))) == INLINE_FRAME) { /* Claim we are stepping in the calling frame. An empty step range means that we will stop once we aren't in a function called by that frame. We don't use the magic "1" value for step_range_end, because then infrun will think this is nexti, and not step over the rest of this inlined function call. */ struct thread_info *tp = inferior_thread (); struct symtab_and_line empty_sal; init_sal (&empty_sal); set_step_info (frame, empty_sal); tp->step_range_start = tp->step_range_end = get_frame_pc (frame); tp->step_over_calls = STEP_OVER_ALL; /* Print info on the selected frame, including level number but not source. */ if (from_tty) { printf_filtered (_("Run till exit from ")); print_stack_frame (get_selected_frame (NULL), 1, LOCATION); } proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 1); return; } /* Find the function we will return from. */ function = find_pc_function (get_frame_pc (get_selected_frame (NULL))); /* Print info on the selected frame, including level number but not source. */ if (from_tty) { if (execution_direction == EXEC_REVERSE) printf_filtered (_("Run back to call of ")); else printf_filtered (_("Run till exit from ")); print_stack_frame (get_selected_frame (NULL), 1, LOCATION); } if (execution_direction == EXEC_REVERSE) finish_backward (function); else finish_forward (function, frame); } static void program_info (char *args, int from_tty) { bpstat bs; int num, stat; struct thread_info *tp; ptid_t ptid; if (!target_has_execution) { printf_filtered (_("The program being debugged is not being run.\n")); return; } if (non_stop) ptid = inferior_ptid; else { struct target_waitstatus ws; get_last_target_status (&ptid, &ws); } if (ptid_equal (ptid, null_ptid) || is_exited (ptid)) error (_("Invalid selected thread.")); else if (is_running (ptid)) error (_("Selected thread is running.")); tp = find_thread_ptid (ptid); bs = tp->stop_bpstat; stat = bpstat_num (&bs, &num); target_files_info (); printf_filtered (_("Program stopped at %s.\n"), paddress (target_gdbarch, stop_pc)); if (tp->stop_step) printf_filtered (_("It stopped after being stepped.\n")); else if (stat != 0) { /* There may be several breakpoints in the same place, so this isn't as strange as it seems. */ while (stat != 0) { if (stat < 0) { printf_filtered (_("\ It stopped at a breakpoint that has since been deleted.\n")); } else printf_filtered (_("It stopped at breakpoint %d.\n"), num); stat = bpstat_num (&bs, &num); } } else if (tp->stop_signal != TARGET_SIGNAL_0) { printf_filtered (_("It stopped with signal %s, %s.\n"), target_signal_to_name (tp->stop_signal), target_signal_to_string (tp->stop_signal)); } if (!from_tty) { printf_filtered (_("\ Type \"info stack\" or \"info registers\" for more information.\n")); } } static void environment_info (char *var, int from_tty) { if (var) { char *val = get_in_environ (current_inferior ()->environment, var); if (val) { puts_filtered (var); puts_filtered (" = "); puts_filtered (val); puts_filtered ("\n"); } else { puts_filtered ("Environment variable \""); puts_filtered (var); puts_filtered ("\" not defined.\n"); } } else { char **vector = environ_vector (current_inferior ()->environment); while (*vector) { puts_filtered (*vector++); puts_filtered ("\n"); } } } static void set_environment_command (char *arg, int from_tty) { char *p, *val, *var; int nullset = 0; if (arg == 0) error_no_arg (_("environment variable and value")); /* Find seperation between variable name and value */ p = (char *) strchr (arg, '='); val = (char *) strchr (arg, ' '); if (p != 0 && val != 0) { /* We have both a space and an equals. If the space is before the equals, walk forward over the spaces til we see a nonspace (possibly the equals). */ if (p > val) while (*val == ' ') val++; /* Now if the = is after the char following the spaces, take the char following the spaces. */ if (p > val) p = val - 1; } else if (val != 0 && p == 0) p = val; if (p == arg) error_no_arg (_("environment variable to set")); if (p == 0 || p[1] == 0) { nullset = 1; if (p == 0) p = arg + strlen (arg); /* So that savestring below will work */ } else { /* Not setting variable value to null */ val = p + 1; while (*val == ' ' || *val == '\t') val++; } while (p != arg && (p[-1] == ' ' || p[-1] == '\t')) p--; var = savestring (arg, p - arg); if (nullset) { printf_filtered (_("\ Setting environment variable \"%s\" to null value.\n"), var); set_in_environ (current_inferior ()->environment, var, ""); } else set_in_environ (current_inferior ()->environment, var, val); xfree (var); } static void unset_environment_command (char *var, int from_tty) { if (var == 0) { /* If there is no argument, delete all environment variables. Ask for confirmation if reading from the terminal. */ if (!from_tty || query (_("Delete all environment variables? "))) { free_environ (current_inferior ()->environment); current_inferior ()->environment = make_environ (); } } else unset_in_environ (current_inferior ()->environment, var); } /* Handle the execution path (PATH variable) */ static const char path_var_name[] = "PATH"; static void path_info (char *args, int from_tty) { puts_filtered ("Executable and object file path: "); puts_filtered (get_in_environ (current_inferior ()->environment, path_var_name)); puts_filtered ("\n"); } /* Add zero or more directories to the front of the execution path. */ static void path_command (char *dirname, int from_tty) { char *exec_path; char *env; dont_repeat (); env = get_in_environ (current_inferior ()->environment, path_var_name); /* Can be null if path is not set */ if (!env) env = ""; exec_path = xstrdup (env); mod_path (dirname, &exec_path); set_in_environ (current_inferior ()->environment, path_var_name, exec_path); xfree (exec_path); if (from_tty) path_info ((char *) NULL, from_tty); } /* Print out the machine register regnum. If regnum is -1, print all registers (print_all == 1) or all non-float and non-vector registers (print_all == 0). For most machines, having all_registers_info() print the register(s) one per line is good enough. If a different format is required, (eg, for MIPS or Pyramid 90x, which both have lots of regs), or there is an existing convention for showing all the registers, define the architecture method PRINT_REGISTERS_INFO to provide that format. */ void default_print_registers_info (struct gdbarch *gdbarch, struct ui_file *file, struct frame_info *frame, int regnum, int print_all) { int i; const int numregs = gdbarch_num_regs (gdbarch) + gdbarch_num_pseudo_regs (gdbarch); gdb_byte buffer[MAX_REGISTER_SIZE]; for (i = 0; i < numregs; i++) { /* Decide between printing all regs, non-float / vector regs, or specific reg. */ if (regnum == -1) { if (print_all) { if (!gdbarch_register_reggroup_p (gdbarch, i, all_reggroup)) continue; } else { if (!gdbarch_register_reggroup_p (gdbarch, i, general_reggroup)) continue; } } else { if (i != regnum) continue; } /* If the register name is empty, it is undefined for this processor, so don't display anything. */ if (gdbarch_register_name (gdbarch, i) == NULL || *(gdbarch_register_name (gdbarch, i)) == '\0') continue; fputs_filtered (gdbarch_register_name (gdbarch, i), file); print_spaces_filtered (15 - strlen (gdbarch_register_name (gdbarch, i)), file); /* Get the data in raw format. */ if (! frame_register_read (frame, i, buffer)) { fprintf_filtered (file, "*value not available*\n"); continue; } /* If virtual format is floating, print it that way, and in raw hex. */ if (TYPE_CODE (register_type (gdbarch, i)) == TYPE_CODE_FLT || TYPE_CODE (register_type (gdbarch, i)) == TYPE_CODE_DECFLOAT) { int j; struct value_print_options opts; get_user_print_options (&opts); opts.deref_ref = 1; val_print (register_type (gdbarch, i), buffer, 0, 0, file, 0, &opts, current_language); fprintf_filtered (file, "\t(raw 0x"); for (j = 0; j < register_size (gdbarch, i); j++) { int idx; if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG) idx = j; else idx = register_size (gdbarch, i) - 1 - j; fprintf_filtered (file, "%02x", (unsigned char) buffer[idx]); } fprintf_filtered (file, ")"); } else { struct value_print_options opts; /* Print the register in hex. */ get_formatted_print_options (&opts, 'x'); opts.deref_ref = 1; val_print (register_type (gdbarch, i), buffer, 0, 0, file, 0, &opts, current_language); /* If not a vector register, print it also according to its natural format. */ if (TYPE_VECTOR (register_type (gdbarch, i)) == 0) { get_user_print_options (&opts); opts.deref_ref = 1; fprintf_filtered (file, "\t"); val_print (register_type (gdbarch, i), buffer, 0, 0, file, 0, &opts, current_language); } } fprintf_filtered (file, "\n"); } } void registers_info (char *addr_exp, int fpregs) { struct frame_info *frame; struct gdbarch *gdbarch; int regnum, numregs; char *end; if (!target_has_registers) error (_("The program has no registers now.")); frame = get_selected_frame (NULL); gdbarch = get_frame_arch (frame); if (!addr_exp) { gdbarch_print_registers_info (gdbarch, gdb_stdout, frame, -1, fpregs); return; } while (*addr_exp != '\0') { char *start; const char *end; /* Keep skipping leading white space. */ if (isspace ((*addr_exp))) { addr_exp++; continue; } /* Discard any leading ``$''. Check that there is something resembling a register following it. */ if (addr_exp[0] == '$') addr_exp++; if (isspace ((*addr_exp)) || (*addr_exp) == '\0') error (_("Missing register name")); /* Find the start/end of this register name/num/group. */ start = addr_exp; while ((*addr_exp) != '\0' && !isspace ((*addr_exp))) addr_exp++; end = addr_exp; /* Figure out what we've found and display it. */ /* A register name? */ { int regnum = user_reg_map_name_to_regnum (gdbarch, start, end - start); if (regnum >= 0) { /* User registers lie completely outside of the range of normal registers. Catch them early so that the target never sees them. */ if (regnum >= gdbarch_num_regs (gdbarch) + gdbarch_num_pseudo_regs (gdbarch)) { struct value_print_options opts; struct value *val = value_of_user_reg (regnum, frame); printf_filtered ("%s: ", start); get_formatted_print_options (&opts, 'x'); print_scalar_formatted (value_contents (val), check_typedef (value_type (val)), &opts, 0, gdb_stdout); printf_filtered ("\n"); } else gdbarch_print_registers_info (gdbarch, gdb_stdout, frame, regnum, fpregs); continue; } } /* A register group? */ { struct reggroup *group; for (group = reggroup_next (gdbarch, NULL); group != NULL; group = reggroup_next (gdbarch, group)) { /* Don't bother with a length check. Should the user enter a short register group name, go with the first group that matches. */ if (strncmp (start, reggroup_name (group), end - start) == 0) break; } if (group != NULL) { int regnum; for (regnum = 0; regnum < gdbarch_num_regs (gdbarch) + gdbarch_num_pseudo_regs (gdbarch); regnum++) { if (gdbarch_register_reggroup_p (gdbarch, regnum, group)) gdbarch_print_registers_info (gdbarch, gdb_stdout, frame, regnum, fpregs); } continue; } } /* Nothing matched. */ error (_("Invalid register `%.*s'"), (int) (end - start), start); } } void all_registers_info (char *addr_exp, int from_tty) { registers_info (addr_exp, 1); } static void nofp_registers_info (char *addr_exp, int from_tty) { registers_info (addr_exp, 0); } static void print_vector_info (struct ui_file *file, struct frame_info *frame, const char *args) { struct gdbarch *gdbarch = get_frame_arch (frame); if (gdbarch_print_vector_info_p (gdbarch)) gdbarch_print_vector_info (gdbarch, file, frame, args); else { int regnum; int printed_something = 0; for (regnum = 0; regnum < gdbarch_num_regs (gdbarch) + gdbarch_num_pseudo_regs (gdbarch); regnum++) { if (gdbarch_register_reggroup_p (gdbarch, regnum, vector_reggroup)) { printed_something = 1; gdbarch_print_registers_info (gdbarch, file, frame, regnum, 1); } } if (!printed_something) fprintf_filtered (file, "No vector information\n"); } } static void vector_info (char *args, int from_tty) { if (!target_has_registers) error (_("The program has no registers now.")); print_vector_info (gdb_stdout, get_selected_frame (NULL), args); } /* Kill the inferior process. Make us have no inferior. */ static void kill_command (char *arg, int from_tty) { /* FIXME: This should not really be inferior_ptid (or target_has_execution). It should be a distinct flag that indicates that a target is active, cuz some targets don't have processes! */ if (ptid_equal (inferior_ptid, null_ptid)) error (_("The program is not being run.")); if (!query (_("Kill the program being debugged? "))) error (_("Not confirmed.")); target_kill (); /* If we still have other inferiors to debug, then don't mess with with their threads. */ if (!have_inferiors ()) { init_thread_list (); /* Destroy thread info */ /* Killing off the inferior can leave us with a core file. If so, print the state we are left in. */ if (target_has_stack) { printf_filtered (_("In %s,\n"), target_longname); print_stack_frame (get_selected_frame (NULL), 1, SRC_AND_LOC); } } bfd_cache_close_all (); } /* Used in `attach&' command. ARG is a point to an integer representing a process id. Proceed threads of this process iff they stopped due to debugger request, and when they did, they reported a clean stop (TARGET_SIGNAL_0). Do not proceed threads that have been explicitly been told to stop. */ static int proceed_after_attach_callback (struct thread_info *thread, void *arg) { int pid = * (int *) arg; if (ptid_get_pid (thread->ptid) == pid && !is_exited (thread->ptid) && !is_executing (thread->ptid) && !thread->stop_requested && thread->stop_signal == TARGET_SIGNAL_0) { switch_to_thread (thread->ptid); clear_proceed_status (); proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0); } return 0; } static void proceed_after_attach (int pid) { /* Don't error out if the current thread is running, because there may be other stopped threads. */ struct cleanup *old_chain; /* Backup current thread and selected frame. */ old_chain = make_cleanup_restore_current_thread (); iterate_over_threads (proceed_after_attach_callback, &pid); /* Restore selected ptid. */ do_cleanups (old_chain); } /* * TODO: * Should save/restore the tty state since it might be that the * program to be debugged was started on this tty and it wants * the tty in some state other than what we want. If it's running * on another terminal or without a terminal, then saving and * restoring the tty state is a harmless no-op. * This only needs to be done if we are attaching to a process. */ /* attach_command -- takes a program started up outside of gdb and ``attaches'' to it. This stops it cold in its tracks and allows us to start debugging it. and wait for the trace-trap that results from attaching. */ static void attach_command_post_wait (char *args, int from_tty, int async_exec) { char *exec_file; char *full_exec_path = NULL; struct inferior *inferior; inferior = current_inferior (); inferior->stop_soon = NO_STOP_QUIETLY; /* If no exec file is yet known, try to determine it from the process itself. */ exec_file = (char *) get_exec_file (0); if (!exec_file) { exec_file = target_pid_to_exec_file (PIDGET (inferior_ptid)); if (exec_file) { /* It's possible we don't have a full path, but rather just a filename. Some targets, such as HP-UX, don't provide the full path, sigh. Attempt to qualify the filename against the source path. (If that fails, we'll just fall back on the original filename. Not much more we can do...) */ if (!source_full_path_of (exec_file, &full_exec_path)) full_exec_path = xstrdup (exec_file); exec_file_attach (full_exec_path, from_tty); symbol_file_add_main (full_exec_path, from_tty); } } else { reopen_exec_file (); reread_symbols (); } /* Take any necessary post-attaching actions for this platform. */ target_post_attach (PIDGET (inferior_ptid)); post_create_inferior (¤t_target, from_tty); /* Install inferior's terminal modes. */ target_terminal_inferior (); if (async_exec) { /* The user requested an `attach&', so be sure to leave threads that didn't get a signal running. */ /* Immediatelly resume all suspended threads of this inferior, and this inferior only. This should have no effect on already running threads. If a thread has been stopped with a signal, leave it be. */ if (non_stop) proceed_after_attach (inferior->pid); else { if (inferior_thread ()->stop_signal == TARGET_SIGNAL_0) { clear_proceed_status (); proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0); } } } else { /* The user requested a plain `attach', so be sure to leave the inferior stopped. */ if (target_can_async_p ()) async_enable_stdin (); /* At least the current thread is already stopped. */ /* In all-stop, by definition, all threads have to be already stopped at this point. In non-stop, however, although the selected thread is stopped, others may still be executing. Be sure to explicitly stop all threads of the process. This should have no effect on already stopped threads. */ if (non_stop) target_stop (pid_to_ptid (inferior->pid)); /* Tell the user/frontend where we're stopped. */ normal_stop (); if (deprecated_attach_hook) deprecated_attach_hook (); } } struct attach_command_continuation_args { char *args; int from_tty; int async_exec; }; static void attach_command_continuation (void *args) { struct attach_command_continuation_args *a = args; attach_command_post_wait (a->args, a->from_tty, a->async_exec); } static void attach_command_continuation_free_args (void *args) { struct attach_command_continuation_args *a = args; xfree (a->args); xfree (a); } void attach_command (char *args, int from_tty) { char *exec_file; char *full_exec_path = NULL; int async_exec = 0; struct cleanup *back_to = make_cleanup (null_cleanup, NULL); dont_repeat (); /* Not for the faint of heart */ if (gdbarch_has_global_solist (target_gdbarch)) /* Don't complain if all processes share the same symbol space. */ ; else if (target_has_execution) { if (query (_("A program is being debugged already. Kill it? "))) target_kill (); else error (_("Not killed.")); } /* Clean up any leftovers from other runs. Some other things from this function should probably be moved into target_pre_inferior. */ target_pre_inferior (from_tty); if (non_stop && !target_supports_non_stop ()) error (_("Cannot attach to this target in non-stop mode")); if (args) { async_exec = strip_bg_char (&args); /* If we get a request for running in the bg but the target doesn't support it, error out. */ if (async_exec && !target_can_async_p ()) error (_("Asynchronous execution not supported on this target.")); } /* If we don't get a request of running in the bg, then we need to simulate synchronous (fg) execution. */ if (!async_exec && target_can_async_p ()) { /* Simulate synchronous execution */ async_disable_stdin (); make_cleanup ((make_cleanup_ftype *)async_enable_stdin, NULL); } target_attach (args, from_tty); /* Set up the "saved terminal modes" of the inferior based on what modes we are starting it with. */ target_terminal_init (); /* Set up execution context to know that we should return from wait_for_inferior as soon as the target reports a stop. */ init_wait_for_inferior (); clear_proceed_status (); if (non_stop) { /* If we find that the current thread isn't stopped, explicitly do so now, because we're going to install breakpoints and poke at memory. */ if (async_exec) /* The user requested an `attach&'; stop just one thread. */ target_stop (inferior_ptid); else /* The user requested an `attach', so stop all threads of this inferior. */ target_stop (pid_to_ptid (ptid_get_pid (inferior_ptid))); } /* Some system don't generate traps when attaching to inferior. E.g. Mach 3 or GNU hurd. */ if (!target_attach_no_wait) { struct inferior *inferior = current_inferior (); /* Careful here. See comments in inferior.h. Basically some OSes don't ignore SIGSTOPs on continue requests anymore. We need a way for handle_inferior_event to reset the stop_signal variable after an attach, and this is what STOP_QUIETLY_NO_SIGSTOP is for. */ inferior->stop_soon = STOP_QUIETLY_NO_SIGSTOP; if (target_can_async_p ()) { /* sync_execution mode. Wait for stop. */ struct attach_command_continuation_args *a; a = xmalloc (sizeof (*a)); a->args = xstrdup (args); a->from_tty = from_tty; a->async_exec = async_exec; add_inferior_continuation (attach_command_continuation, a, attach_command_continuation_free_args); discard_cleanups (back_to); return; } wait_for_inferior (0); } attach_command_post_wait (args, from_tty, async_exec); discard_cleanups (back_to); } /* We had just found out that the target was already attached to an inferior. PTID points at a thread of this new inferior, that is the most likely to be stopped right now, but not necessarily so. The new inferior is assumed to be already added to the inferior list at this point. If LEAVE_RUNNING, then leave the threads of this inferior running, except those we've explicitly seen reported as stopped. */ void notice_new_inferior (ptid_t ptid, int leave_running, int from_tty) { struct cleanup* old_chain; int async_exec; old_chain = make_cleanup (null_cleanup, NULL); /* If in non-stop, leave threads as running as they were. If they're stopped for some reason other than us telling it to, the target reports a signal != TARGET_SIGNAL_0. We don't try to resume threads with such a stop signal. */ async_exec = non_stop; if (!ptid_equal (inferior_ptid, null_ptid)) make_cleanup_restore_current_thread (); switch_to_thread (ptid); /* When we "notice" a new inferior we need to do all the things we would normally do if we had just attached to it. */ if (is_executing (inferior_ptid)) { struct inferior *inferior = current_inferior (); /* We're going to install breakpoints, and poke at memory, ensure that the inferior is stopped for a moment while we do that. */ target_stop (inferior_ptid); inferior->stop_soon = STOP_QUIETLY_REMOTE; /* Wait for stop before proceeding. */ if (target_can_async_p ()) { struct attach_command_continuation_args *a; a = xmalloc (sizeof (*a)); a->args = xstrdup (""); a->from_tty = from_tty; a->async_exec = async_exec; add_inferior_continuation (attach_command_continuation, a, attach_command_continuation_free_args); do_cleanups (old_chain); return; } else wait_for_inferior (0); } async_exec = leave_running; attach_command_post_wait ("" /* args */, from_tty, async_exec); do_cleanups (old_chain); } /* * detach_command -- * takes a program previously attached to and detaches it. * The program resumes execution and will no longer stop * on signals, etc. We better not have left any breakpoints * in the program or it'll die when it hits one. For this * to work, it may be necessary for the process to have been * previously attached. It *might* work if the program was * started via the normal ptrace (PTRACE_TRACEME). */ void detach_command (char *args, int from_tty) { dont_repeat (); /* Not for the faint of heart. */ if (ptid_equal (inferior_ptid, null_ptid)) error (_("The program is not being run.")); disconnect_or_stop_tracing (from_tty); target_detach (args, from_tty); /* If the solist is global across inferiors, don't clear it when we detach from a single inferior. */ if (!gdbarch_has_global_solist (target_gdbarch)) no_shared_libraries (NULL, from_tty); /* If we still have inferiors to debug, then don't mess with their threads. */ if (!have_inferiors ()) init_thread_list (); if (deprecated_detach_hook) deprecated_detach_hook (); } /* Disconnect from the current target without resuming it (leaving it waiting for a debugger). We'd better not have left any breakpoints in the program or the next debugger will get confused. Currently only supported for some remote targets, since the normal attach mechanisms don't work on stopped processes on some native platforms (e.g. GNU/Linux). */ static void disconnect_command (char *args, int from_tty) { dont_repeat (); /* Not for the faint of heart */ target_disconnect (args, from_tty); no_shared_libraries (NULL, from_tty); init_thread_list (); if (deprecated_detach_hook) deprecated_detach_hook (); } void interrupt_target_1 (int all_threads) { ptid_t ptid; if (all_threads) ptid = minus_one_ptid; else ptid = inferior_ptid; target_stop (ptid); /* Tag the thread as having been explicitly requested to stop, so other parts of gdb know not to resume this thread automatically, if it was stopped due to an internal event. Limit this to non-stop mode, as when debugging a multi-threaded application in all-stop mode, we will only get one stop event --- it's undefined which thread will report the event. */ if (non_stop) set_stop_requested (ptid, 1); } /* Stop the execution of the target while running in async mode, in the backgound. In all-stop, stop the whole process. In non-stop mode, stop the current thread only by default, or stop all threads if the `-a' switch is used. */ /* interrupt [-a] */ void interrupt_target_command (char *args, int from_tty) { if (target_can_async_p ()) { int all_threads = 0; dont_repeat (); /* Not for the faint of heart */ if (args != NULL && strncmp (args, "-a", sizeof ("-a") - 1) == 0) all_threads = 1; if (!non_stop && all_threads) error (_("-a is meaningless in all-stop mode.")); interrupt_target_1 (all_threads); } } static void print_float_info (struct ui_file *file, struct frame_info *frame, const char *args) { struct gdbarch *gdbarch = get_frame_arch (frame); if (gdbarch_print_float_info_p (gdbarch)) gdbarch_print_float_info (gdbarch, file, frame, args); else { int regnum; int printed_something = 0; for (regnum = 0; regnum < gdbarch_num_regs (gdbarch) + gdbarch_num_pseudo_regs (gdbarch); regnum++) { if (gdbarch_register_reggroup_p (gdbarch, regnum, float_reggroup)) { printed_something = 1; gdbarch_print_registers_info (gdbarch, file, frame, regnum, 1); } } if (!printed_something) fprintf_filtered (file, "\ No floating-point info available for this processor.\n"); } } static void float_info (char *args, int from_tty) { if (!target_has_registers) error (_("The program has no registers now.")); print_float_info (gdb_stdout, get_selected_frame (NULL), args); } static void unset_command (char *args, int from_tty) { printf_filtered (_("\ \"unset\" must be followed by the name of an unset subcommand.\n")); help_list (unsetlist, "unset ", -1, gdb_stdout); } void _initialize_infcmd (void) { struct cmd_list_element *c = NULL; /* add the filename of the terminal connected to inferior I/O */ add_setshow_filename_cmd ("inferior-tty", class_run, &inferior_io_terminal_scratch, _("\ Set terminal for future runs of program being debugged."), _("\ Show terminal for future runs of program being debugged."), _("\ Usage: set inferior-tty /dev/pts/1"), set_inferior_tty_command, show_inferior_tty_command, &setlist, &showlist); add_com_alias ("tty", "set inferior-tty", class_alias, 0); add_setshow_optional_filename_cmd ("args", class_run, &inferior_args_scratch, _("\ Set argument list to give program being debugged when it is started."), _("\ Show argument list to give program being debugged when it is started."), _("\ Follow this command with any number of args, to be passed to the program."), set_args_command, show_args_command, &setlist, &showlist); c = add_cmd ("environment", no_class, environment_info, _("\ The environment to give the program, or one variable's value.\n\ With an argument VAR, prints the value of environment variable VAR to\n\ give the program being debugged. With no arguments, prints the entire\n\ environment to be given to the program."), &showlist); set_cmd_completer (c, noop_completer); add_prefix_cmd ("unset", no_class, unset_command, _("Complement to certain \"set\" commands."), &unsetlist, "unset ", 0, &cmdlist); c = add_cmd ("environment", class_run, unset_environment_command, _("\ Cancel environment variable VAR for the program.\n\ This does not affect the program until the next \"run\" command."), &unsetlist); set_cmd_completer (c, noop_completer); c = add_cmd ("environment", class_run, set_environment_command, _("\ Set environment variable value to give the program.\n\ Arguments are VAR VALUE where VAR is variable name and VALUE is value.\n\ VALUES of environment variables are uninterpreted strings.\n\ This does not affect the program until the next \"run\" command."), &setlist); set_cmd_completer (c, noop_completer); c = add_com ("path", class_files, path_command, _("\ Add directory DIR(s) to beginning of search path for object files.\n\ $cwd in the path means the current working directory.\n\ This path is equivalent to the $PATH shell variable. It is a list of\n\ directories, separated by colons. These directories are searched to find\n\ fully linked executable files and separately compiled object files as needed.")); set_cmd_completer (c, filename_completer); c = add_cmd ("paths", no_class, path_info, _("\ Current search path for finding object files.\n\ $cwd in the path means the current working directory.\n\ This path is equivalent to the $PATH shell variable. It is a list of\n\ directories, separated by colons. These directories are searched to find\n\ fully linked executable files and separately compiled object files as needed."), &showlist); set_cmd_completer (c, noop_completer); add_prefix_cmd ("kill", class_run, kill_command, _("Kill execution of program being debugged."), &killlist, "kill ", 0, &cmdlist); add_com ("attach", class_run, attach_command, _("\ Attach to a process or file outside of GDB.\n\ This command attaches to another target, of the same type as your last\n\ \"target\" command (\"info files\" will show your target stack).\n\ The command may take as argument a process id or a device file.\n\ For a process id, you must have permission to send the process a signal,\n\ and it must have the same effective uid as the debugger.\n\ When using \"attach\" with a process id, the debugger finds the\n\ program running in the process, looking first in the current working\n\ directory, or (if not found there) using the source file search path\n\ (see the \"directory\" command). You can also use the \"file\" command\n\ to specify the program, and to load its symbol table.")); add_prefix_cmd ("detach", class_run, detach_command, _("\ Detach a process or file previously attached.\n\ If a process, it is no longer traced, and it continues its execution. If\n\ you were debugging a file, the file is closed and gdb no longer accesses it."), &detachlist, "detach ", 0, &cmdlist); add_com ("disconnect", class_run, disconnect_command, _("\ Disconnect from a target.\n\ The target will wait for another debugger to connect. Not available for\n\ all targets.")); add_com ("signal", class_run, signal_command, _("\ Continue program giving it signal specified by the argument.\n\ An argument of \"0\" means continue program without giving it a signal.")); add_com ("stepi", class_run, stepi_command, _("\ Step one instruction exactly.\n\ Argument N means do this N times (or till program stops for another reason).")); add_com_alias ("si", "stepi", class_alias, 0); add_com ("nexti", class_run, nexti_command, _("\ Step one instruction, but proceed through subroutine calls.\n\ Argument N means do this N times (or till program stops for another reason).")); add_com_alias ("ni", "nexti", class_alias, 0); add_com ("finish", class_run, finish_command, _("\ Execute until selected stack frame returns.\n\ Upon return, the value returned is printed and put in the value history.")); add_com_alias ("fin", "finish", class_run, 1); add_com ("next", class_run, next_command, _("\ Step program, proceeding through subroutine calls.\n\ Like the \"step\" command as long as subroutine calls do not happen;\n\ when they do, the call is treated as one instruction.\n\ Argument N means do this N times (or till program stops for another reason).")); add_com_alias ("n", "next", class_run, 1); if (xdb_commands) add_com_alias ("S", "next", class_run, 1); add_com ("step", class_run, step_command, _("\ Step program until it reaches a different source line.\n\ Argument N means do this N times (or till program stops for another reason).")); add_com_alias ("s", "step", class_run, 1); c = add_com ("until", class_run, until_command, _("\ Execute until the program reaches a source line greater than the current\n\ or a specified location (same args as break command) within the current frame.")); set_cmd_completer (c, location_completer); add_com_alias ("u", "until", class_run, 1); c = add_com ("advance", class_run, advance_command, _("\ Continue the program up to the given location (same form as args for break command).\n\ Execution will also stop upon exit from the current stack frame.")); set_cmd_completer (c, location_completer); c = add_com ("jump", class_run, jump_command, _("\ Continue program being debugged at specified line or address.\n\ Give as argument either LINENUM or *ADDR, where ADDR is an expression\n\ for an address to start at.")); set_cmd_completer (c, location_completer); if (xdb_commands) { c = add_com ("go", class_run, go_command, _("\ Usage: go \n\ Continue program being debugged, stopping at specified line or \n\ address.\n\ Give as argument either LINENUM or *ADDR, where ADDR is an \n\ expression for an address to start at.\n\ This command is a combination of tbreak and jump.")); set_cmd_completer (c, location_completer); } if (xdb_commands) add_com_alias ("g", "go", class_run, 1); c = add_com ("continue", class_run, continue_command, _("\ Continue program being debugged, after signal or breakpoint.\n\ If proceeding from breakpoint, a number N may be used as an argument,\n\ which means to set the ignore count of that breakpoint to N - 1 (so that\n\ the breakpoint won't break until the Nth time it is reached).\n\ \n\ If non-stop mode is enabled, continue only the current thread,\n\ otherwise all the threads in the program are continued. To \n\ continue all stopped threads in non-stop mode, use the -a option.\n\ Specifying -a and an ignore count simultaneously is an error.")); add_com_alias ("c", "cont", class_run, 1); add_com_alias ("fg", "cont", class_run, 1); c = add_com ("run", class_run, run_command, _("\ Start debugged program. You may specify arguments to give it.\n\ Args may include \"*\", or \"[...]\"; they are expanded using \"sh\".\n\ Input and output redirection with \">\", \"<\", or \">>\" are also allowed.\n\n\ With no arguments, uses arguments last specified (with \"run\" or \"set args\").\n\ To cancel previous arguments and run with no arguments,\n\ use \"set args\" without arguments.")); set_cmd_completer (c, filename_completer); add_com_alias ("r", "run", class_run, 1); if (xdb_commands) add_com ("R", class_run, run_no_args_command, _("Start debugged program with no arguments.")); c = add_com ("start", class_run, start_command, _("\ Run the debugged program until the beginning of the main procedure.\n\ You may specify arguments to give to your program, just as with the\n\ \"run\" command.")); set_cmd_completer (c, filename_completer); c = add_com ("interrupt", class_run, interrupt_target_command, _("Interrupt the execution of the debugged program.\n\ If non-stop mode is enabled, interrupt only the current thread,\n\ otherwise all the threads in the program are stopped. To \n\ interrupt all running threads in non-stop mode, use the -a option.")); add_info ("registers", nofp_registers_info, _("\ List of integer registers and their contents, for selected stack frame.\n\ Register name as argument means describe only that register.")); add_info_alias ("r", "registers", 1); if (xdb_commands) add_com ("lr", class_info, nofp_registers_info, _("\ List of integer registers and their contents, for selected stack frame.\n\ Register name as argument means describe only that register.")); add_info ("all-registers", all_registers_info, _("\ List of all registers and their contents, for selected stack frame.\n\ Register name as argument means describe only that register.")); add_info ("program", program_info, _("Execution status of the program.")); add_info ("float", float_info, _("Print the status of the floating point unit\n")); add_info ("vector", vector_info, _("Print the status of the vector unit\n")); }