/* Functions specific to running gdb native on IA-64 running GNU/Linux. Copyright (C) 1999-2013 Free Software Foundation, Inc. This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #include "defs.h" #include #include "inferior.h" #include "target.h" #include "gdbcore.h" #include "regcache.h" #include "ia64-tdep.h" #include "linux-nat.h" #include #include #include "gdb_wait.h" #ifdef HAVE_SYS_REG_H #include #endif #include #include #include #include /* Prototypes for supply_gregset etc. */ #include "gregset.h" /* These must match the order of the register names. Some sort of lookup table is needed because the offsets associated with the registers are all over the board. */ static int u_offsets[] = { /* general registers */ -1, /* gr0 not available; i.e, it's always zero. */ PT_R1, PT_R2, PT_R3, PT_R4, PT_R5, PT_R6, PT_R7, PT_R8, PT_R9, PT_R10, PT_R11, PT_R12, PT_R13, PT_R14, PT_R15, PT_R16, PT_R17, PT_R18, PT_R19, PT_R20, PT_R21, PT_R22, PT_R23, PT_R24, PT_R25, PT_R26, PT_R27, PT_R28, PT_R29, PT_R30, PT_R31, /* gr32 through gr127 not directly available via the ptrace interface. */ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* Floating point registers */ -1, -1, /* f0 and f1 not available (f0 is +0.0 and f1 is +1.0). */ PT_F2, PT_F3, PT_F4, PT_F5, PT_F6, PT_F7, PT_F8, PT_F9, PT_F10, PT_F11, PT_F12, PT_F13, PT_F14, PT_F15, PT_F16, PT_F17, PT_F18, PT_F19, PT_F20, PT_F21, PT_F22, PT_F23, PT_F24, PT_F25, PT_F26, PT_F27, PT_F28, PT_F29, PT_F30, PT_F31, PT_F32, PT_F33, PT_F34, PT_F35, PT_F36, PT_F37, PT_F38, PT_F39, PT_F40, PT_F41, PT_F42, PT_F43, PT_F44, PT_F45, PT_F46, PT_F47, PT_F48, PT_F49, PT_F50, PT_F51, PT_F52, PT_F53, PT_F54, PT_F55, PT_F56, PT_F57, PT_F58, PT_F59, PT_F60, PT_F61, PT_F62, PT_F63, PT_F64, PT_F65, PT_F66, PT_F67, PT_F68, PT_F69, PT_F70, PT_F71, PT_F72, PT_F73, PT_F74, PT_F75, PT_F76, PT_F77, PT_F78, PT_F79, PT_F80, PT_F81, PT_F82, PT_F83, PT_F84, PT_F85, PT_F86, PT_F87, PT_F88, PT_F89, PT_F90, PT_F91, PT_F92, PT_F93, PT_F94, PT_F95, PT_F96, PT_F97, PT_F98, PT_F99, PT_F100, PT_F101, PT_F102, PT_F103, PT_F104, PT_F105, PT_F106, PT_F107, PT_F108, PT_F109, PT_F110, PT_F111, PT_F112, PT_F113, PT_F114, PT_F115, PT_F116, PT_F117, PT_F118, PT_F119, PT_F120, PT_F121, PT_F122, PT_F123, PT_F124, PT_F125, PT_F126, PT_F127, /* Predicate registers - we don't fetch these individually. */ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* branch registers */ PT_B0, PT_B1, PT_B2, PT_B3, PT_B4, PT_B5, PT_B6, PT_B7, /* Virtual frame pointer and virtual return address pointer. */ -1, -1, /* other registers */ PT_PR, PT_CR_IIP, /* ip */ PT_CR_IPSR, /* psr */ PT_CFM, /* cfm */ /* kernel registers not visible via ptrace interface (?) */ -1, -1, -1, -1, -1, -1, -1, -1, /* hole */ -1, -1, -1, -1, -1, -1, -1, -1, PT_AR_RSC, PT_AR_BSP, PT_AR_BSPSTORE, PT_AR_RNAT, -1, -1, /* Not available: FCR, IA32 floating control register. */ -1, -1, -1, /* Not available: EFLAG */ -1, /* Not available: CSD */ -1, /* Not available: SSD */ -1, /* Not available: CFLG */ -1, /* Not available: FSR */ -1, /* Not available: FIR */ -1, /* Not available: FDR */ -1, PT_AR_CCV, -1, -1, -1, PT_AR_UNAT, -1, -1, -1, PT_AR_FPSR, -1, -1, -1, -1, /* Not available: ITC */ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, PT_AR_PFS, PT_AR_LC, PT_AR_EC, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* nat bits - not fetched directly; instead we obtain these bits from either rnat or unat or from memory. */ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, }; static CORE_ADDR ia64_register_addr (struct gdbarch *gdbarch, int regno) { CORE_ADDR addr; if (regno < 0 || regno >= gdbarch_num_regs (gdbarch)) error (_("Invalid register number %d."), regno); if (u_offsets[regno] == -1) addr = 0; else addr = (CORE_ADDR) u_offsets[regno]; return addr; } static int ia64_cannot_fetch_register (struct gdbarch *gdbarch, int regno) { return regno < 0 || regno >= gdbarch_num_regs (gdbarch) || u_offsets[regno] == -1; } static int ia64_cannot_store_register (struct gdbarch *gdbarch, int regno) { /* Rationale behind not permitting stores to bspstore... The IA-64 architecture provides bspstore and bsp which refer memory locations in the RSE's backing store. bspstore is the next location which will be written when the RSE needs to write to memory. bsp is the address at which r32 in the current frame would be found if it were written to the backing store. The IA-64 architecture provides read-only access to bsp and read/write access to bspstore (but only when the RSE is in the enforced lazy mode). It should be noted that stores to bspstore also affect the value of bsp. Changing bspstore does not affect the number of dirty entries between bspstore and bsp, so changing bspstore by N words will also cause bsp to be changed by (roughly) N as well. (It could be N-1 or N+1 depending upon where the NaT collection bits fall.) OTOH, the Linux kernel provides read/write access to bsp (and currently read/write access to bspstore as well). But it is definitely the case that if you change one, the other will change at the same time. It is more useful to gdb to be able to change bsp. So in order to prevent strange and undesirable things from happening when a dummy stack frame is popped (after calling an inferior function), we allow bspstore to be read, but not written. (Note that popping a (generic) dummy stack frame causes all registers that were previously read from the inferior process to be written back.) */ return regno < 0 || regno >= gdbarch_num_regs (gdbarch) || u_offsets[regno] == -1 || regno == IA64_BSPSTORE_REGNUM; } void supply_gregset (struct regcache *regcache, const gregset_t *gregsetp) { int regi; const greg_t *regp = (const greg_t *) gregsetp; for (regi = IA64_GR0_REGNUM; regi <= IA64_GR31_REGNUM; regi++) { regcache_raw_supply (regcache, regi, regp + (regi - IA64_GR0_REGNUM)); } /* FIXME: NAT collection bits are at index 32; gotta deal with these somehow... */ regcache_raw_supply (regcache, IA64_PR_REGNUM, regp + 33); for (regi = IA64_BR0_REGNUM; regi <= IA64_BR7_REGNUM; regi++) { regcache_raw_supply (regcache, regi, regp + 34 + (regi - IA64_BR0_REGNUM)); } regcache_raw_supply (regcache, IA64_IP_REGNUM, regp + 42); regcache_raw_supply (regcache, IA64_CFM_REGNUM, regp + 43); regcache_raw_supply (regcache, IA64_PSR_REGNUM, regp + 44); regcache_raw_supply (regcache, IA64_RSC_REGNUM, regp + 45); regcache_raw_supply (regcache, IA64_BSP_REGNUM, regp + 46); regcache_raw_supply (regcache, IA64_BSPSTORE_REGNUM, regp + 47); regcache_raw_supply (regcache, IA64_RNAT_REGNUM, regp + 48); regcache_raw_supply (regcache, IA64_CCV_REGNUM, regp + 49); regcache_raw_supply (regcache, IA64_UNAT_REGNUM, regp + 50); regcache_raw_supply (regcache, IA64_FPSR_REGNUM, regp + 51); regcache_raw_supply (regcache, IA64_PFS_REGNUM, regp + 52); regcache_raw_supply (regcache, IA64_LC_REGNUM, regp + 53); regcache_raw_supply (regcache, IA64_EC_REGNUM, regp + 54); } void fill_gregset (const struct regcache *regcache, gregset_t *gregsetp, int regno) { int regi; greg_t *regp = (greg_t *) gregsetp; #define COPY_REG(_idx_,_regi_) \ if ((regno == -1) || regno == _regi_) \ regcache_raw_collect (regcache, _regi_, regp + _idx_) for (regi = IA64_GR0_REGNUM; regi <= IA64_GR31_REGNUM; regi++) { COPY_REG (regi - IA64_GR0_REGNUM, regi); } /* FIXME: NAT collection bits at index 32? */ COPY_REG (33, IA64_PR_REGNUM); for (regi = IA64_BR0_REGNUM; regi <= IA64_BR7_REGNUM; regi++) { COPY_REG (34 + (regi - IA64_BR0_REGNUM), regi); } COPY_REG (42, IA64_IP_REGNUM); COPY_REG (43, IA64_CFM_REGNUM); COPY_REG (44, IA64_PSR_REGNUM); COPY_REG (45, IA64_RSC_REGNUM); COPY_REG (46, IA64_BSP_REGNUM); COPY_REG (47, IA64_BSPSTORE_REGNUM); COPY_REG (48, IA64_RNAT_REGNUM); COPY_REG (49, IA64_CCV_REGNUM); COPY_REG (50, IA64_UNAT_REGNUM); COPY_REG (51, IA64_FPSR_REGNUM); COPY_REG (52, IA64_PFS_REGNUM); COPY_REG (53, IA64_LC_REGNUM); COPY_REG (54, IA64_EC_REGNUM); } /* Given a pointer to a floating point register set in /proc format (fpregset_t *), unpack the register contents and supply them as gdb's idea of the current floating point register values. */ void supply_fpregset (struct regcache *regcache, const fpregset_t *fpregsetp) { int regi; const char *from; const gdb_byte f_zero[16] = { 0 }; const gdb_byte f_one[16] = { 0, 0, 0, 0, 0, 0, 0, 0x80, 0xff, 0xff, 0, 0, 0, 0, 0, 0 }; /* Kernel generated cores have fr1==0 instead of 1.0. Older GDBs did the same. So ignore whatever might be recorded in fpregset_t for fr0/fr1 and always supply their expected values. */ /* fr0 is always read as zero. */ regcache_raw_supply (regcache, IA64_FR0_REGNUM, f_zero); /* fr1 is always read as one (1.0). */ regcache_raw_supply (regcache, IA64_FR1_REGNUM, f_one); for (regi = IA64_FR2_REGNUM; regi <= IA64_FR127_REGNUM; regi++) { from = (const char *) &((*fpregsetp)[regi - IA64_FR0_REGNUM]); regcache_raw_supply (regcache, regi, from); } } /* Given a pointer to a floating point register set in /proc format (fpregset_t *), update the register specified by REGNO from gdb's idea of the current floating point register set. If REGNO is -1, update them all. */ void fill_fpregset (const struct regcache *regcache, fpregset_t *fpregsetp, int regno) { int regi; for (regi = IA64_FR0_REGNUM; regi <= IA64_FR127_REGNUM; regi++) { if ((regno == -1) || (regno == regi)) regcache_raw_collect (regcache, regi, &((*fpregsetp)[regi - IA64_FR0_REGNUM])); } } #define IA64_PSR_DB (1UL << 24) #define IA64_PSR_DD (1UL << 39) static void enable_watchpoints_in_psr (ptid_t ptid) { struct regcache *regcache = get_thread_regcache (ptid); ULONGEST psr; regcache_cooked_read_unsigned (regcache, IA64_PSR_REGNUM, &psr); if (!(psr & IA64_PSR_DB)) { psr |= IA64_PSR_DB; /* Set the db bit - this enables hardware watchpoints and breakpoints. */ regcache_cooked_write_unsigned (regcache, IA64_PSR_REGNUM, psr); } } static long debug_registers[8]; static void store_debug_register (ptid_t ptid, int idx, long val) { int tid; tid = ptid_get_lwp (ptid); if (tid == 0) tid = ptid_get_pid (ptid); (void) ptrace (PT_WRITE_U, tid, (PTRACE_TYPE_ARG3) (PT_DBR + 8 * idx), val); } static void store_debug_register_pair (ptid_t ptid, int idx, long *dbr_addr, long *dbr_mask) { if (dbr_addr) store_debug_register (ptid, 2 * idx, *dbr_addr); if (dbr_mask) store_debug_register (ptid, 2 * idx + 1, *dbr_mask); } static int is_power_of_2 (int val) { int i, onecount; onecount = 0; for (i = 0; i < 8 * sizeof (val); i++) if (val & (1 << i)) onecount++; return onecount <= 1; } static int ia64_linux_insert_watchpoint (CORE_ADDR addr, int len, int rw, struct expression *cond) { struct lwp_info *lp; int idx; long dbr_addr, dbr_mask; int max_watchpoints = 4; if (len <= 0 || !is_power_of_2 (len)) return -1; for (idx = 0; idx < max_watchpoints; idx++) { dbr_mask = debug_registers[idx * 2 + 1]; if ((dbr_mask & (0x3UL << 62)) == 0) { /* Exit loop if both r and w bits clear. */ break; } } if (idx == max_watchpoints) return -1; dbr_addr = (long) addr; dbr_mask = (~(len - 1) & 0x00ffffffffffffffL); /* construct mask to match */ dbr_mask |= 0x0800000000000000L; /* Only match privilege level 3 */ switch (rw) { case hw_write: dbr_mask |= (1L << 62); /* Set w bit */ break; case hw_read: dbr_mask |= (1L << 63); /* Set r bit */ break; case hw_access: dbr_mask |= (3L << 62); /* Set both r and w bits */ break; default: return -1; } debug_registers[2 * idx] = dbr_addr; debug_registers[2 * idx + 1] = dbr_mask; ALL_LWPS (lp) { store_debug_register_pair (lp->ptid, idx, &dbr_addr, &dbr_mask); enable_watchpoints_in_psr (lp->ptid); } return 0; } static int ia64_linux_remove_watchpoint (CORE_ADDR addr, int len, int type, struct expression *cond) { int idx; long dbr_addr, dbr_mask; int max_watchpoints = 4; if (len <= 0 || !is_power_of_2 (len)) return -1; for (idx = 0; idx < max_watchpoints; idx++) { dbr_addr = debug_registers[2 * idx]; dbr_mask = debug_registers[2 * idx + 1]; if ((dbr_mask & (0x3UL << 62)) && addr == (CORE_ADDR) dbr_addr) { struct lwp_info *lp; debug_registers[2 * idx] = 0; debug_registers[2 * idx + 1] = 0; dbr_addr = 0; dbr_mask = 0; ALL_LWPS (lp) store_debug_register_pair (lp->ptid, idx, &dbr_addr, &dbr_mask); return 0; } } return -1; } static void ia64_linux_new_thread (struct lwp_info *lp) { int i, any; any = 0; for (i = 0; i < 8; i++) { if (debug_registers[i] != 0) any = 1; store_debug_register (lp->ptid, i, debug_registers[i]); } if (any) enable_watchpoints_in_psr (lp->ptid); } static int ia64_linux_stopped_data_address (struct target_ops *ops, CORE_ADDR *addr_p) { CORE_ADDR psr; siginfo_t siginfo; struct regcache *regcache = get_current_regcache (); if (!linux_nat_get_siginfo (inferior_ptid, &siginfo)) return 0; if (siginfo.si_signo != SIGTRAP || (siginfo.si_code & 0xffff) != 0x0004 /* TRAP_HWBKPT */) return 0; regcache_cooked_read_unsigned (regcache, IA64_PSR_REGNUM, &psr); psr |= IA64_PSR_DD; /* Set the dd bit - this will disable the watchpoint for the next instruction. */ regcache_cooked_write_unsigned (regcache, IA64_PSR_REGNUM, psr); *addr_p = (CORE_ADDR) siginfo.si_addr; return 1; } static int ia64_linux_stopped_by_watchpoint (void) { CORE_ADDR addr; return ia64_linux_stopped_data_address (¤t_target, &addr); } static int ia64_linux_can_use_hw_breakpoint (int type, int cnt, int othertype) { return 1; } /* Fetch register REGNUM from the inferior. */ static void ia64_linux_fetch_register (struct regcache *regcache, int regnum) { struct gdbarch *gdbarch = get_regcache_arch (regcache); CORE_ADDR addr; size_t size; PTRACE_TYPE_RET *buf; int pid, i; /* r0 cannot be fetched but is always zero. */ if (regnum == IA64_GR0_REGNUM) { const gdb_byte zero[8] = { 0 }; gdb_assert (sizeof (zero) == register_size (gdbarch, regnum)); regcache_raw_supply (regcache, regnum, zero); return; } /* fr0 cannot be fetched but is always zero. */ if (regnum == IA64_FR0_REGNUM) { const gdb_byte f_zero[16] = { 0 }; gdb_assert (sizeof (f_zero) == register_size (gdbarch, regnum)); regcache_raw_supply (regcache, regnum, f_zero); return; } /* fr1 cannot be fetched but is always one (1.0). */ if (regnum == IA64_FR1_REGNUM) { const gdb_byte f_one[16] = { 0, 0, 0, 0, 0, 0, 0, 0x80, 0xff, 0xff, 0, 0, 0, 0, 0, 0 }; gdb_assert (sizeof (f_one) == register_size (gdbarch, regnum)); regcache_raw_supply (regcache, regnum, f_one); return; } if (ia64_cannot_fetch_register (gdbarch, regnum)) { regcache_raw_supply (regcache, regnum, NULL); return; } /* Cater for systems like GNU/Linux, that implement threads as separate processes. */ pid = ptid_get_lwp (inferior_ptid); if (pid == 0) pid = ptid_get_pid (inferior_ptid); /* This isn't really an address, but ptrace thinks of it as one. */ addr = ia64_register_addr (gdbarch, regnum); size = register_size (gdbarch, regnum); gdb_assert ((size % sizeof (PTRACE_TYPE_RET)) == 0); buf = alloca (size); /* Read the register contents from the inferior a chunk at a time. */ for (i = 0; i < size / sizeof (PTRACE_TYPE_RET); i++) { errno = 0; buf[i] = ptrace (PT_READ_U, pid, (PTRACE_TYPE_ARG3)addr, 0); if (errno != 0) error (_("Couldn't read register %s (#%d): %s."), gdbarch_register_name (gdbarch, regnum), regnum, safe_strerror (errno)); addr += sizeof (PTRACE_TYPE_RET); } regcache_raw_supply (regcache, regnum, buf); } /* Fetch register REGNUM from the inferior. If REGNUM is -1, do this for all registers. */ static void ia64_linux_fetch_registers (struct target_ops *ops, struct regcache *regcache, int regnum) { if (regnum == -1) for (regnum = 0; regnum < gdbarch_num_regs (get_regcache_arch (regcache)); regnum++) ia64_linux_fetch_register (regcache, regnum); else ia64_linux_fetch_register (regcache, regnum); } /* Store register REGNUM into the inferior. */ static void ia64_linux_store_register (const struct regcache *regcache, int regnum) { struct gdbarch *gdbarch = get_regcache_arch (regcache); CORE_ADDR addr; size_t size; PTRACE_TYPE_RET *buf; int pid, i; if (ia64_cannot_store_register (gdbarch, regnum)) return; /* Cater for systems like GNU/Linux, that implement threads as separate processes. */ pid = ptid_get_lwp (inferior_ptid); if (pid == 0) pid = ptid_get_pid (inferior_ptid); /* This isn't really an address, but ptrace thinks of it as one. */ addr = ia64_register_addr (gdbarch, regnum); size = register_size (gdbarch, regnum); gdb_assert ((size % sizeof (PTRACE_TYPE_RET)) == 0); buf = alloca (size); /* Write the register contents into the inferior a chunk at a time. */ regcache_raw_collect (regcache, regnum, buf); for (i = 0; i < size / sizeof (PTRACE_TYPE_RET); i++) { errno = 0; ptrace (PT_WRITE_U, pid, (PTRACE_TYPE_ARG3)addr, buf[i]); if (errno != 0) error (_("Couldn't write register %s (#%d): %s."), gdbarch_register_name (gdbarch, regnum), regnum, safe_strerror (errno)); addr += sizeof (PTRACE_TYPE_RET); } } /* Store register REGNUM back into the inferior. If REGNUM is -1, do this for all registers. */ static void ia64_linux_store_registers (struct target_ops *ops, struct regcache *regcache, int regnum) { if (regnum == -1) for (regnum = 0; regnum < gdbarch_num_regs (get_regcache_arch (regcache)); regnum++) ia64_linux_store_register (regcache, regnum); else ia64_linux_store_register (regcache, regnum); } static LONGEST (*super_xfer_partial) (struct target_ops *, enum target_object, const char *, gdb_byte *, const gdb_byte *, ULONGEST, LONGEST); static LONGEST ia64_linux_xfer_partial (struct target_ops *ops, enum target_object object, const char *annex, gdb_byte *readbuf, const gdb_byte *writebuf, ULONGEST offset, LONGEST len) { if (object == TARGET_OBJECT_UNWIND_TABLE && writebuf == NULL && offset == 0) return syscall (__NR_getunwind, readbuf, len); return super_xfer_partial (ops, object, annex, readbuf, writebuf, offset, len); } /* For break.b instruction ia64 CPU forgets the immediate value and generates SIGILL with ILL_ILLOPC instead of more common SIGTRAP with TRAP_BRKPT. ia64 does not use gdbarch_decr_pc_after_break so we do not have to make any difference for the signals here. */ static int ia64_linux_status_is_event (int status) { return WIFSTOPPED (status) && (WSTOPSIG (status) == SIGTRAP || WSTOPSIG (status) == SIGILL); } void _initialize_ia64_linux_nat (void); void _initialize_ia64_linux_nat (void) { struct target_ops *t; /* Fill in the generic GNU/Linux methods. */ t = linux_target (); /* Override the default fetch/store register routines. */ t->to_fetch_registers = ia64_linux_fetch_registers; t->to_store_registers = ia64_linux_store_registers; /* Override the default to_xfer_partial. */ super_xfer_partial = t->to_xfer_partial; t->to_xfer_partial = ia64_linux_xfer_partial; /* Override watchpoint routines. */ /* The IA-64 architecture can step over a watch point (without triggering it again) if the "dd" (data debug fault disable) bit in the processor status word is set. This PSR bit is set in ia64_linux_stopped_by_watchpoint when the code there has determined that a hardware watchpoint has indeed been hit. The CPU will then be able to execute one instruction without triggering a watchpoint. */ t->to_have_steppable_watchpoint = 1; t->to_can_use_hw_breakpoint = ia64_linux_can_use_hw_breakpoint; t->to_stopped_by_watchpoint = ia64_linux_stopped_by_watchpoint; t->to_stopped_data_address = ia64_linux_stopped_data_address; t->to_insert_watchpoint = ia64_linux_insert_watchpoint; t->to_remove_watchpoint = ia64_linux_remove_watchpoint; /* Register the target. */ linux_nat_add_target (t); linux_nat_set_new_thread (t, ia64_linux_new_thread); linux_nat_set_status_is_event (t, ia64_linux_status_is_event); }