/* Target-dependent code for GNU/Linux i386. Copyright 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc. This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include "defs.h" #include "gdbcore.h" #include "frame.h" #include "value.h" #include "regcache.h" #include "inferior.h" #include "osabi.h" #include "reggroups.h" #include "gdb_string.h" #include "i386-tdep.h" #include "i386-linux-tdep.h" #include "glibc-tdep.h" #include "solib-svr4.h" /* Return the name of register REG. */ static const char * i386_linux_register_name (int reg) { /* Deal with the extra "orig_eax" pseudo register. */ if (reg == I386_LINUX_ORIG_EAX_REGNUM) return "orig_eax"; return i386_register_name (reg); } /* Return non-zero, when the register is in the corresponding register group. Put the LINUX_ORIG_EAX register in the system group. */ static int i386_linux_register_reggroup_p (struct gdbarch *gdbarch, int regnum, struct reggroup *group) { if (regnum == I386_LINUX_ORIG_EAX_REGNUM) return (group == system_reggroup || group == save_reggroup || group == restore_reggroup); return i386_register_reggroup_p (gdbarch, regnum, group); } /* Recognizing signal handler frames. */ /* GNU/Linux has two flavors of signals. Normal signal handlers, and "realtime" (RT) signals. The RT signals can provide additional information to the signal handler if the SA_SIGINFO flag is set when establishing a signal handler using `sigaction'. It is not unlikely that future versions of GNU/Linux will support SA_SIGINFO for normal signals too. */ /* When the i386 Linux kernel calls a signal handler and the SA_RESTORER flag isn't set, the return address points to a bit of code on the stack. This function returns whether the PC appears to be within this bit of code. The instruction sequence for normal signals is pop %eax mov $0x77, %eax int $0x80 or 0x58 0xb8 0x77 0x00 0x00 0x00 0xcd 0x80. Checking for the code sequence should be somewhat reliable, because the effect is to call the system call sigreturn. This is unlikely to occur anywhere other than a signal trampoline. It kind of sucks that we have to read memory from the process in order to identify a signal trampoline, but there doesn't seem to be any other way. The DEPRECATED_PC_IN_SIGTRAMP macro in tm-linux.h arranges to only call us if no function name could be identified, which should be the case since the code is on the stack. Detection of signal trampolines for handlers that set the SA_RESTORER flag is in general not possible. Unfortunately this is what the GNU C Library has been doing for quite some time now. However, as of version 2.1.2, the GNU C Library uses signal trampolines (named __restore and __restore_rt) that are identical to the ones used by the kernel. Therefore, these trampolines are supported too. */ #define LINUX_SIGTRAMP_INSN0 0x58 /* pop %eax */ #define LINUX_SIGTRAMP_OFFSET0 0 #define LINUX_SIGTRAMP_INSN1 0xb8 /* mov $NNNN, %eax */ #define LINUX_SIGTRAMP_OFFSET1 1 #define LINUX_SIGTRAMP_INSN2 0xcd /* int */ #define LINUX_SIGTRAMP_OFFSET2 6 static const unsigned char linux_sigtramp_code[] = { LINUX_SIGTRAMP_INSN0, /* pop %eax */ LINUX_SIGTRAMP_INSN1, 0x77, 0x00, 0x00, 0x00, /* mov $0x77, %eax */ LINUX_SIGTRAMP_INSN2, 0x80 /* int $0x80 */ }; #define LINUX_SIGTRAMP_LEN (sizeof linux_sigtramp_code) /* If PC is in a sigtramp routine, return the address of the start of the routine. Otherwise, return 0. */ static CORE_ADDR i386_linux_sigtramp_start (CORE_ADDR pc) { unsigned char buf[LINUX_SIGTRAMP_LEN]; /* We only recognize a signal trampoline if PC is at the start of one of the three instructions. We optimize for finding the PC at the start, as will be the case when the trampoline is not the first frame on the stack. We assume that in the case where the PC is not at the start of the instruction sequence, there will be a few trailing readable bytes on the stack. */ if (read_memory_nobpt (pc, (char *) buf, LINUX_SIGTRAMP_LEN) != 0) return 0; if (buf[0] != LINUX_SIGTRAMP_INSN0) { int adjust; switch (buf[0]) { case LINUX_SIGTRAMP_INSN1: adjust = LINUX_SIGTRAMP_OFFSET1; break; case LINUX_SIGTRAMP_INSN2: adjust = LINUX_SIGTRAMP_OFFSET2; break; default: return 0; } pc -= adjust; if (read_memory_nobpt (pc, (char *) buf, LINUX_SIGTRAMP_LEN) != 0) return 0; } if (memcmp (buf, linux_sigtramp_code, LINUX_SIGTRAMP_LEN) != 0) return 0; return pc; } /* This function does the same for RT signals. Here the instruction sequence is mov $0xad, %eax int $0x80 or 0xb8 0xad 0x00 0x00 0x00 0xcd 0x80. The effect is to call the system call rt_sigreturn. */ #define LINUX_RT_SIGTRAMP_INSN0 0xb8 /* mov $NNNN, %eax */ #define LINUX_RT_SIGTRAMP_OFFSET0 0 #define LINUX_RT_SIGTRAMP_INSN1 0xcd /* int */ #define LINUX_RT_SIGTRAMP_OFFSET1 5 static const unsigned char linux_rt_sigtramp_code[] = { LINUX_RT_SIGTRAMP_INSN0, 0xad, 0x00, 0x00, 0x00, /* mov $0xad, %eax */ LINUX_RT_SIGTRAMP_INSN1, 0x80 /* int $0x80 */ }; #define LINUX_RT_SIGTRAMP_LEN (sizeof linux_rt_sigtramp_code) /* If PC is in a RT sigtramp routine, return the address of the start of the routine. Otherwise, return 0. */ static CORE_ADDR i386_linux_rt_sigtramp_start (CORE_ADDR pc) { unsigned char buf[LINUX_RT_SIGTRAMP_LEN]; /* We only recognize a signal trampoline if PC is at the start of one of the two instructions. We optimize for finding the PC at the start, as will be the case when the trampoline is not the first frame on the stack. We assume that in the case where the PC is not at the start of the instruction sequence, there will be a few trailing readable bytes on the stack. */ if (read_memory_nobpt (pc, (char *) buf, LINUX_RT_SIGTRAMP_LEN) != 0) return 0; if (buf[0] != LINUX_RT_SIGTRAMP_INSN0) { if (buf[0] != LINUX_RT_SIGTRAMP_INSN1) return 0; pc -= LINUX_RT_SIGTRAMP_OFFSET1; if (read_memory_nobpt (pc, (char *) buf, LINUX_RT_SIGTRAMP_LEN) != 0) return 0; } if (memcmp (buf, linux_rt_sigtramp_code, LINUX_RT_SIGTRAMP_LEN) != 0) return 0; return pc; } /* Return whether PC is in a GNU/Linux sigtramp routine. */ static int i386_linux_pc_in_sigtramp (CORE_ADDR pc, char *name) { /* If we have NAME, we can optimize the search. The trampolines are named __restore and __restore_rt. However, they aren't dynamically exported from the shared C library, so the trampoline may appear to be part of the preceding function. This should always be sigaction, __sigaction, or __libc_sigaction (all aliases to the same function). */ if (name == NULL || strstr (name, "sigaction") != NULL) return (i386_linux_sigtramp_start (pc) != 0 || i386_linux_rt_sigtramp_start (pc) != 0); return (strcmp ("__restore", name) == 0 || strcmp ("__restore_rt", name) == 0); } /* Offset to struct sigcontext in ucontext, from . */ #define I386_LINUX_UCONTEXT_SIGCONTEXT_OFFSET 20 /* Assuming NEXT_FRAME is a frame following a GNU/Linux sigtramp routine, return the address of the associated sigcontext structure. */ static CORE_ADDR i386_linux_sigcontext_addr (struct frame_info *next_frame) { CORE_ADDR pc; CORE_ADDR sp; char buf[4]; frame_unwind_register (next_frame, I386_ESP_REGNUM, buf); sp = extract_unsigned_integer (buf, 4); pc = i386_linux_sigtramp_start (frame_pc_unwind (next_frame)); if (pc) { /* The sigcontext structure lives on the stack, right after the signum argument. We determine the address of the sigcontext structure by looking at the frame's stack pointer. Keep in mind that the first instruction of the sigtramp code is "pop %eax". If the PC is after this instruction, adjust the returned value accordingly. */ if (pc == frame_pc_unwind (next_frame)) return sp + 4; return sp; } pc = i386_linux_rt_sigtramp_start (frame_pc_unwind (next_frame)); if (pc) { CORE_ADDR ucontext_addr; /* The sigcontext structure is part of the user context. A pointer to the user context is passed as the third argument to the signal handler. */ read_memory (sp + 8, buf, 4); ucontext_addr = extract_unsigned_integer (buf, 4); return ucontext_addr + I386_LINUX_UCONTEXT_SIGCONTEXT_OFFSET; } error ("Couldn't recognize signal trampoline."); return 0; } /* Set the program counter for process PTID to PC. */ static void i386_linux_write_pc (CORE_ADDR pc, ptid_t ptid) { write_register_pid (I386_EIP_REGNUM, pc, ptid); /* We must be careful with modifying the program counter. If we just interrupted a system call, the kernel might try to restart it when we resume the inferior. On restarting the system call, the kernel will try backing up the program counter even though it no longer points at the system call. This typically results in a SIGSEGV or SIGILL. We can prevent this by writing `-1' in the "orig_eax" pseudo-register. Note that "orig_eax" is saved when setting up a dummy call frame. This means that it is properly restored when that frame is popped, and that the interrupted system call will be restarted when we resume the inferior on return from a function call from within GDB. In all other cases the system call will not be restarted. */ write_register_pid (I386_LINUX_ORIG_EAX_REGNUM, -1, ptid); } /* The register sets used in GNU/Linux ELF core-dumps are identical to the register sets in `struct user' that are used for a.out core-dumps. These are also used by ptrace(2). The corresponding types are `elf_gregset_t' for the general-purpose registers (with `elf_greg_t' the type of a single GP register) and `elf_fpregset_t' for the floating-point registers. Those types used to be available under the names `gregset_t' and `fpregset_t' too, and GDB used those names in the past. But those names are now used for the register sets used in the `mcontext_t' type, which have a different size and layout. */ /* Mapping between the general-purpose registers in `struct user' format and GDB's register cache layout. */ /* From . */ static int i386_linux_gregset_reg_offset[] = { 6 * 4, /* %eax */ 1 * 4, /* %ecx */ 2 * 4, /* %edx */ 0 * 4, /* %ebx */ 15 * 4, /* %esp */ 5 * 4, /* %ebp */ 3 * 4, /* %esi */ 4 * 4, /* %edi */ 12 * 4, /* %eip */ 14 * 4, /* %eflags */ 13 * 4, /* %cs */ 16 * 4, /* %ss */ 7 * 4, /* %ds */ 8 * 4, /* %es */ 9 * 4, /* %fs */ 10 * 4, /* %gs */ -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, 11 * 4 /* "orig_eax" */ }; /* Mapping between the general-purpose registers in `struct sigcontext' format and GDB's register cache layout. */ /* From . */ static int i386_linux_sc_reg_offset[] = { 11 * 4, /* %eax */ 10 * 4, /* %ecx */ 9 * 4, /* %edx */ 8 * 4, /* %ebx */ 7 * 4, /* %esp */ 6 * 4, /* %ebp */ 5 * 4, /* %esi */ 4 * 4, /* %edi */ 14 * 4, /* %eip */ 16 * 4, /* %eflags */ 15 * 4, /* %cs */ 18 * 4, /* %ss */ 3 * 4, /* %ds */ 2 * 4, /* %es */ 1 * 4, /* %fs */ 0 * 4 /* %gs */ }; static void i386_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch) { struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); /* GNU/Linux uses ELF. */ i386_elf_init_abi (info, gdbarch); /* Since we have the extra "orig_eax" register on GNU/Linux, we have to adjust a few things. */ set_gdbarch_write_pc (gdbarch, i386_linux_write_pc); set_gdbarch_num_regs (gdbarch, I386_LINUX_NUM_REGS); set_gdbarch_register_name (gdbarch, i386_linux_register_name); set_gdbarch_register_reggroup_p (gdbarch, i386_linux_register_reggroup_p); tdep->gregset_reg_offset = i386_linux_gregset_reg_offset; tdep->gregset_num_regs = ARRAY_SIZE (i386_linux_gregset_reg_offset); tdep->sizeof_gregset = 17 * 4; tdep->jb_pc_offset = 20; /* From . */ tdep->sigcontext_addr = i386_linux_sigcontext_addr; tdep->sc_reg_offset = i386_linux_sc_reg_offset; tdep->sc_num_regs = ARRAY_SIZE (i386_linux_sc_reg_offset); /* When the i386 Linux kernel calls a signal handler, the return address points to a bit of code on the stack. This function is used to identify this bit of code as a signal trampoline in order to support backtracing through calls to signal handlers. */ set_gdbarch_deprecated_pc_in_sigtramp (gdbarch, i386_linux_pc_in_sigtramp); /* GNU/Linux uses SVR4-style shared libraries. */ set_solib_svr4_fetch_link_map_offsets (gdbarch, svr4_ilp32_fetch_link_map_offsets); /* GNU/Linux uses the dynamic linker included in the GNU C Library. */ set_gdbarch_skip_solib_resolver (gdbarch, glibc_skip_solib_resolver); } /* Provide a prototype to silence -Wmissing-prototypes. */ extern void _initialize_i386_linux_tdep (void); void _initialize_i386_linux_tdep (void) { gdbarch_register_osabi (bfd_arch_i386, 0, GDB_OSABI_LINUX, i386_linux_init_abi); }