/* Read dbx symbol tables and convert to internal format, for GDB. Copyright 1986, 1987, 1988, 1989, 1990, 1991 Free Software Foundation, Inc. This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* This module provides three functions: dbx_symfile_init, which initializes to read a symbol file; dbx_new_init, which discards existing cached information when all symbols are being discarded; and dbx_symfile_read, which reads a symbol table from a file. dbx_symfile_read only does the minimum work necessary for letting the user "name" things symbolically; it does not read the entire symtab. Instead, it reads the external and static symbols and puts them in partial symbol tables. When more extensive information is requested of a file, the corresponding partial symbol table is mutated into a full fledged symbol table by going back and reading the symbols for real. dbx_psymtab_to_symtab() is the function that does this */ #include #include #include "defs.h" #ifdef USG #include #include #define L_SET 0 #define L_INCR 1 #endif #include #include #ifndef NO_SYS_FILE #include #endif #include #include #include "symtab.h" #include "breakpoint.h" #include "command.h" #include "target.h" #include "gdbcore.h" /* for bfd stuff */ #include "libaout.h" /* FIXME Secret internal BFD stuff for a.out */ #include "symfile.h" #include "buildsym.h" #include "aout/aout64.h" #include "aout/stab_gnu.h" /* We always use GNU stabs, not native, now */ /* Information is passed among various dbxread routines for accessing symbol files. A pointer to this structure is kept in the sym_private field of the struct sym_fns passed in by symfile.h. */ struct dbx_symfile_info { asection *text_sect; /* Text section accessor */ int symcount; /* How many symbols are there in the file */ char *stringtab; /* The actual string table */ int stringtab_size; /* Its size */ off_t symtab_offset; /* Offset in file to symbol table */ }; /* Each partial symbol table entry contains a pointer to private data for the read_symtab() function to use when expanding a partial symbol table entry to a full symbol table entry. For dbxread this structure contains the offset within the file symbol table of first local symbol for this file, and length (in bytes) of the section of the symbol table devoted to this file's symbols (actually, the section bracketed may contain more than just this file's symbols). If ldsymlen is 0, the only reason for this thing's existence is the dependency list. Nothing else will happen when it is read in. */ #define LDSYMOFF(p) (((struct symloc *)((p)->read_symtab_private))->ldsymoff) #define LDSYMLEN(p) (((struct symloc *)((p)->read_symtab_private))->ldsymlen) struct symloc { int ldsymoff; int ldsymlen; }; /* Macro to determine which symbols to ignore when reading the first symbol of a file. Some machines override this definition. */ #ifndef IGNORE_SYMBOL /* This code is used on Ultrix systems. Ignore it */ #define IGNORE_SYMBOL(type) (type == (int)N_NSYMS) #endif /* Macro for name of symbol to indicate a file compiled with gcc. */ #ifndef GCC_COMPILED_FLAG_SYMBOL #define GCC_COMPILED_FLAG_SYMBOL "gcc_compiled." #endif /* Macro for name of symbol to indicate a file compiled with gcc2. */ #ifndef GCC2_COMPILED_FLAG_SYMBOL #define GCC2_COMPILED_FLAG_SYMBOL "gcc2_compiled." #endif /* Define this as 1 if a pcc declaration of a char or short argument gives the correct address. Otherwise assume pcc gives the address of the corresponding int, which is not the same on a big-endian machine. */ #ifndef BELIEVE_PCC_PROMOTION #define BELIEVE_PCC_PROMOTION 0 #endif /* Nonzero means give verbose info on gdb action. From main.c. */ extern int info_verbose; /* The BFD for this file -- implicit parameter to next_symbol_text. */ static bfd *symfile_bfd; /* The objfile for this file -- only good in process_one_symbol(). */ static struct objfile *our_objfile; /* String table for the main symbol file. It is kept in memory permanently, to speed up symbol reading. Other files' symbol tables are read in on demand. FIXME, this should be cleaner. */ static char *symfile_string_table; static int symfile_string_table_size; /* The size of each symbol in the symbol file (in external form). This is set by dbx_symfile_read when building psymtabs, and by dbx_psymtab_to_symtab when building symtabs. */ static unsigned symbol_size; /* Complaints about the symbols we have encountered. */ struct complaint lbrac_complaint = {"bad block start address patched", 0, 0}; struct complaint string_table_offset_complaint = {"bad string table offset in symbol %d", 0, 0}; struct complaint unknown_symtype_complaint = {"unknown symbol type %s", 0, 0}; struct complaint lbrac_rbrac_complaint = {"block start larger than block end", 0, 0}; struct complaint lbrac_unmatched_complaint = {"unmatched N_LBRAC before symtab pos %d", 0, 0}; struct complaint lbrac_mismatch_complaint = {"N_LBRAC/N_RBRAC symbol mismatch at symtab pos %d", 0, 0}; /* During initial symbol readin, we need to have a structure to keep track of which psymtabs have which bincls in them. This structure is used during readin to setup the list of dependencies within each partial symbol table. */ struct header_file_location { char *name; /* Name of header file */ int instance; /* See above */ struct partial_symtab *pst; /* Partial symtab that has the BINCL/EINCL defs for this file */ }; /* The actual list and controling variables */ static struct header_file_location *bincl_list, *next_bincl; static int bincls_allocated; /* Local function prototypes */ static void free_and_init_header_files PARAMS ((void)); static struct pending * copy_pending PARAMS ((struct pending *, int, struct pending *)); static struct symtab * read_ofile_symtab PARAMS ((struct objfile *, char *, unsigned int, int, int, CORE_ADDR, int, int)); static void dbx_psymtab_to_symtab PARAMS ((struct partial_symtab *)); static void psymtab_to_symtab_1 PARAMS ((struct partial_symtab *, char *, int, int)); static void read_dbx_symtab PARAMS ((CORE_ADDR, struct objfile *, char *, long, int, CORE_ADDR, int)); static void free_bincl_list PARAMS ((struct objfile *)); static struct partial_symtab * find_corresponding_bincl_psymtab PARAMS ((char *, int)); static void add_bincl_to_list PARAMS ((struct partial_symtab *, char *, int)); static void init_bincl_list PARAMS ((int, struct objfile *)); static void init_psymbol_list PARAMS ((int, struct objfile *)); static char * dbx_next_symbol_text PARAMS ((void)); static void fill_symbuf PARAMS ((bfd *)); static void dbx_symfile_init PARAMS ((struct sym_fns *)); static void dbx_new_init PARAMS ((void)); static void dbx_symfile_read PARAMS ((struct sym_fns *, CORE_ADDR, int)); static void record_minimal_symbol PARAMS ((char *, CORE_ADDR, int, struct objfile *)); static void add_new_header_file PARAMS ((char *, int)); static void add_old_header_file PARAMS ((char *, int)); static void add_this_object_header_file PARAMS ((int)); /* Free up old header file tables, and allocate new ones. We're reading a new symbol file now. */ static void free_and_init_header_files () { register int i; for (i = 0; i < n_header_files; i++) free (header_files[i].name); if (header_files) /* First time null */ free (header_files); if (this_object_header_files) /* First time null */ free (this_object_header_files); n_allocated_header_files = 10; header_files = (struct header_file *) xmalloc (10 * sizeof (struct header_file)); n_header_files = 0; n_allocated_this_object_header_files = 10; this_object_header_files = (int *) xmalloc (10 * sizeof (int)); } /* Add header file number I for this object file at the next successive FILENUM. */ static void add_this_object_header_file (i) int i; { if (n_this_object_header_files == n_allocated_this_object_header_files) { n_allocated_this_object_header_files *= 2; this_object_header_files = (int *) xrealloc ((char *) this_object_header_files, n_allocated_this_object_header_files * sizeof (int)); } this_object_header_files[n_this_object_header_files++] = i; } /* Add to this file an "old" header file, one already seen in a previous object file. NAME is the header file's name. INSTANCE is its instance code, to select among multiple symbol tables for the same header file. */ static void add_old_header_file (name, instance) char *name; int instance; { register struct header_file *p = header_files; register int i; for (i = 0; i < n_header_files; i++) if (!strcmp (p[i].name, name) && instance == p[i].instance) { add_this_object_header_file (i); return; } error ("Invalid symbol data: \"repeated\" header file that hasn't been seen before, at symtab pos %d.", symnum); } /* Add to this file a "new" header file: definitions for its types follow. NAME is the header file's name. Most often this happens only once for each distinct header file, but not necessarily. If it happens more than once, INSTANCE has a different value each time, and references to the header file use INSTANCE values to select among them. dbx output contains "begin" and "end" markers for each new header file, but at this level we just need to know which files there have been; so we record the file when its "begin" is seen and ignore the "end". */ static void add_new_header_file (name, instance) char *name; int instance; { register int i; header_file_prev_index = -1; /* Make sure there is room for one more header file. */ if (n_header_files == n_allocated_header_files) { n_allocated_header_files *= 2; header_files = (struct header_file *) xrealloc ((char *) header_files, (n_allocated_header_files * sizeof (struct header_file))); } /* Create an entry for this header file. */ i = n_header_files++; header_files[i].name = savestring (name, strlen(name)); header_files[i].instance = instance; header_files[i].length = 10; header_files[i].vector = (struct type **) xmalloc (10 * sizeof (struct type *)); bzero (header_files[i].vector, 10 * sizeof (struct type *)); add_this_object_header_file (i); } #if 0 static struct type ** explicit_lookup_type (real_filenum, index) int real_filenum, index; { register struct header_file *f = &header_files[real_filenum]; if (index >= f->length) { f->length *= 2; f->vector = (struct type **) xrealloc (f->vector, f->length * sizeof (struct type *)); bzero (&f->vector[f->length / 2], f->length * sizeof (struct type *) / 2); } return &f->vector[index]; } #endif static void record_minimal_symbol (name, address, type, objfile) char *name; CORE_ADDR address; int type; struct objfile *objfile; { enum minimal_symbol_type ms_type; switch (type &~ N_EXT) { case N_TEXT: ms_type = mst_text; break; case N_DATA: ms_type = mst_data; break; case N_BSS: ms_type = mst_bss; break; case N_ABS: ms_type = mst_abs; break; #ifdef N_SETV case N_SETV: ms_type = mst_data; break; #endif default: ms_type = mst_unknown; break; } prim_record_minimal_symbol (obsavestring (name, strlen (name), &objfile -> symbol_obstack), address, ms_type); } /* Scan and build partial symbols for a symbol file. We have been initialized by a call to dbx_symfile_init, which put all the relevant info into a "struct dbx_symfile_info" hung off the struct sym_fns SF. ADDR is the address relative to which the symbols in it are (e.g. the base address of the text segment). MAINLINE is true if we are reading the main symbol table (as opposed to a shared lib or dynamically loaded file). */ static void dbx_symfile_read (sf, addr, mainline) struct sym_fns *sf; CORE_ADDR addr; int mainline; /* FIXME comments above */ { struct dbx_symfile_info *info = (struct dbx_symfile_info *) (sf->sym_private); bfd *sym_bfd = sf->objfile->obfd; int val; val = bfd_seek (sf->objfile->obfd, info->symtab_offset, L_SET); if (val < 0) perror_with_name (sf->objfile->name); /* If mainline, set global string table pointers, and reinitialize global partial symbol list. */ if (mainline) { symfile_string_table = info->stringtab; symfile_string_table_size = info->stringtab_size; } /* If we are reinitializing, or if we have never loaded syms yet, init */ if (mainline || sf->objfile->global_psymbols.size == 0 || sf->objfile->static_psymbols.size == 0) init_psymbol_list (info->symcount, sf->objfile); /* FIXME POKING INSIDE BFD DATA STRUCTURES */ symbol_size = obj_symbol_entry_size (sym_bfd); pending_blocks = 0; make_cleanup (really_free_pendings, 0); init_minimal_symbol_collection (); make_cleanup (discard_minimal_symbols, 0); /* Now that the symbol table data of the executable file are all in core, process them and define symbols accordingly. */ read_dbx_symtab (addr - bfd_section_vma (sym_bfd, info->text_sect), /*offset*/ sf->objfile, info->stringtab, info->stringtab_size, info->symcount, bfd_section_vma (sym_bfd, info->text_sect), bfd_section_size (sym_bfd, info->text_sect)); /* Install any minimal symbols that have been collected as the current minimal symbols for this objfile. */ install_minimal_symbols (sf -> objfile); /* Free up any memory we allocated for ourselves. */ if (!mainline) { (*sf->objfile->free) (info->stringtab); /* Stringtab is only saved for mainline */ } (*sf->objfile->free) (info); sf->sym_private = NULL; /* Zap pointer to our (now gone) info struct */ if (!have_partial_symbols ()) { wrap_here (""); printf_filtered ("(no debugging symbols found)..."); wrap_here (""); } } /* Initialize anything that needs initializing when a completely new symbol file is specified (not just adding some symbols from another file, e.g. a shared library). */ static void dbx_new_init () { buildsym_new_init (); /* Don't put these on the cleanup chain; they need to stick around until the next call to dbx_new_init. *Then* we'll free them. */ if (symfile_string_table) { free (symfile_string_table); symfile_string_table = 0; symfile_string_table_size = 0; } free_and_init_header_files (); } /* dbx_symfile_init () is the dbx-specific initialization routine for reading symbols. It is passed a struct sym_fns which contains, among other things, the BFD for the file whose symbols are being read, and a slot for a pointer to "private data" which we fill with goodies. We read the string table into malloc'd space and stash a pointer to it. Since BFD doesn't know how to read debug symbols in a format-independent way (and may never do so...), we have to do it ourselves. We will never be called unless this is an a.out (or very similar) file. FIXME, there should be a cleaner peephole into the BFD environment here. */ static void dbx_symfile_init (sf) struct sym_fns *sf; { int val; bfd *sym_bfd = sf->objfile->obfd; char *name = bfd_get_filename (sym_bfd); struct dbx_symfile_info *info; unsigned char size_temp[4]; /* Allocate struct to keep track of the symfile */ sf->sym_private = (*sf->objfile->xmalloc) (sizeof (*info)); info = (struct dbx_symfile_info *)sf->sym_private; /* FIXME POKING INSIDE BFD DATA STRUCTURES */ #define STRING_TABLE_OFFSET (sym_bfd->origin + obj_str_filepos (sym_bfd)) #define SYMBOL_TABLE_OFFSET (sym_bfd->origin + obj_sym_filepos (sym_bfd)) /* FIXME POKING INSIDE BFD DATA STRUCTURES */ info->text_sect = bfd_get_section_by_name (sym_bfd, ".text"); if (!info->text_sect) abort(); info->symcount = bfd_get_symcount (sym_bfd); /* Read the string table size and check it for bogosity. */ val = bfd_seek (sym_bfd, STRING_TABLE_OFFSET, L_SET); if (val < 0) perror_with_name (name); val = bfd_read (size_temp, sizeof (long), 1, sym_bfd); if (val < 0) perror_with_name (name); info->stringtab_size = bfd_h_get_32 (sym_bfd, size_temp); if (info->stringtab_size >= 0) { /* Yes, this should be malloc, not xmalloc. We check its result. */ info->stringtab = (char *) (*sf->objfile->malloc) (info->stringtab_size); /* Caller is responsible for freeing the string table. No cleanup. */ } else info->stringtab = NULL; if (info->stringtab == NULL && info->stringtab_size != 0) error ("ridiculous string table size: %d bytes", info->stringtab_size); /* Now read in the string table in one big gulp. */ val = bfd_seek (sym_bfd, STRING_TABLE_OFFSET, L_SET); if (val < 0) perror_with_name (name); val = bfd_read (info->stringtab, info->stringtab_size, 1, sym_bfd); if (val != info->stringtab_size) perror_with_name (name); /* Record the position of the symbol table for later use. */ info->symtab_offset = SYMBOL_TABLE_OFFSET; } /* Buffer for reading the symbol table entries. */ static struct internal_nlist symbuf[4096]; static int symbuf_idx; static int symbuf_end; /* The address in memory of the string table of the object file we are reading (which might not be the "main" object file, but might be a shared library or some other dynamically loaded thing). This is set by read_dbx_symtab when building psymtabs, and by read_ofile_symtab when building symtabs, and is used only by next_symbol_text. */ static char *stringtab_global; /* Refill the symbol table input buffer and set the variables that control fetching entries from it. Reports an error if no data available. This function can read past the end of the symbol table (into the string table) but this does no harm. */ static void fill_symbuf (sym_bfd) bfd *sym_bfd; { int nbytes = bfd_read (symbuf, sizeof (symbuf), 1, sym_bfd); if (nbytes < 0) perror_with_name (bfd_get_filename (sym_bfd)); else if (nbytes == 0) error ("Premature end of file reading symbol table"); symbuf_end = nbytes / symbol_size; symbuf_idx = 0; } #define SWAP_SYMBOL(symp, abfd) \ { \ (symp)->n_strx = bfd_h_get_32(abfd, \ (unsigned char *)&(symp)->n_strx); \ (symp)->n_desc = bfd_h_get_16 (abfd, \ (unsigned char *)&(symp)->n_desc); \ (symp)->n_value = bfd_h_get_32 (abfd, \ (unsigned char *)&(symp)->n_value); \ } /* Invariant: The symbol pointed to by symbuf_idx is the first one that hasn't been swapped. Swap the symbol at the same time that symbuf_idx is incremented. */ /* dbx allows the text of a symbol name to be continued into the next symbol name! When such a continuation is encountered (a \ at the end of the text of a name) call this function to get the continuation. */ static char * dbx_next_symbol_text () { if (symbuf_idx == symbuf_end) fill_symbuf (symfile_bfd); symnum++; SWAP_SYMBOL(&symbuf[symbuf_idx], symfile_bfd); return symbuf[symbuf_idx++].n_strx + stringtab_global; } /* Initializes storage for all of the partial symbols that will be created by read_dbx_symtab and subsidiaries. */ static void init_psymbol_list (total_symbols, objfile) int total_symbols; struct objfile *objfile; { /* Free any previously allocated psymbol lists. */ if (objfile -> global_psymbols.list) (*objfile -> free) (objfile -> global_psymbols.list); if (objfile -> static_psymbols.list) (*objfile -> free) (objfile -> static_psymbols.list); /* Current best guess is that there are approximately a twentieth of the total symbols (in a debugging file) are global or static oriented symbols */ objfile -> global_psymbols.size = total_symbols / 10; objfile -> static_psymbols.size = total_symbols / 10; objfile -> global_psymbols.next = objfile -> global_psymbols.list = (struct partial_symbol *) (*objfile -> xmalloc) (objfile -> global_psymbols.size * sizeof (struct partial_symbol)); objfile -> static_psymbols.next = objfile -> static_psymbols.list = (struct partial_symbol *) (*objfile -> xmalloc) (objfile -> static_psymbols.size * sizeof (struct partial_symbol)); } /* Initialize the list of bincls to contain none and have some allocated. */ static void init_bincl_list (number, objfile) int number; struct objfile *objfile; { bincls_allocated = number; next_bincl = bincl_list = (struct header_file_location *) (*objfile -> xmalloc) (bincls_allocated * sizeof(struct header_file_location)); } /* Add a bincl to the list. */ static void add_bincl_to_list (pst, name, instance) struct partial_symtab *pst; char *name; int instance; { if (next_bincl >= bincl_list + bincls_allocated) { int offset = next_bincl - bincl_list; bincls_allocated *= 2; bincl_list = (struct header_file_location *) (*pst->objfile->xrealloc) ((char *)bincl_list, bincls_allocated * sizeof (struct header_file_location)); next_bincl = bincl_list + offset; } next_bincl->pst = pst; next_bincl->instance = instance; next_bincl++->name = name; } /* Given a name, value pair, find the corresponding bincl in the list. Return the partial symtab associated with that header_file_location. */ static struct partial_symtab * find_corresponding_bincl_psymtab (name, instance) char *name; int instance; { struct header_file_location *bincl; for (bincl = bincl_list; bincl < next_bincl; bincl++) if (bincl->instance == instance && !strcmp (name, bincl->name)) return bincl->pst; return (struct partial_symtab *) 0; } /* Free the storage allocated for the bincl list. */ static void free_bincl_list (objfile) struct objfile *objfile; { (*objfile -> free) (bincl_list); bincls_allocated = 0; } /* Given pointers to an a.out symbol table in core containing dbx style data, setup partial_symtab's describing each source file for which debugging information is available. NLISTLEN is the number of symbols in the symbol table. All symbol names are given as offsets relative to STRINGTAB. STRINGTAB_SIZE is the size of STRINGTAB. SYMFILE_NAME is the name of the file we are reading from and ADDR is its relocated address (if incremental) or 0 (if not). */ static void read_dbx_symtab (addr, objfile, stringtab, stringtab_size, nlistlen, text_addr, text_size) CORE_ADDR addr; struct objfile *objfile; register char *stringtab; register long stringtab_size; register int nlistlen; CORE_ADDR text_addr; int text_size; { register struct internal_nlist *bufp; register char *namestring; int nsl; int past_first_source_file = 0; CORE_ADDR last_o_file_start = 0; struct cleanup *old_chain; bfd *abfd; /* End of the text segment of the executable file. */ CORE_ADDR end_of_text_addr; /* Current partial symtab */ struct partial_symtab *pst; /* List of current psymtab's include files */ char **psymtab_include_list; int includes_allocated; int includes_used; /* Index within current psymtab dependency list */ struct partial_symtab **dependency_list; int dependencies_used, dependencies_allocated; stringtab_global = stringtab; pst = (struct partial_symtab *) 0; includes_allocated = 30; includes_used = 0; psymtab_include_list = (char **) alloca (includes_allocated * sizeof (char *)); dependencies_allocated = 30; dependencies_used = 0; dependency_list = (struct partial_symtab **) alloca (dependencies_allocated * sizeof (struct partial_symtab *)); old_chain = make_cleanup (free_objfile, objfile); /* Init bincl list */ init_bincl_list (20, objfile); make_cleanup (free_bincl_list, objfile); last_source_file = 0; #ifdef END_OF_TEXT_DEFAULT end_of_text_addr = END_OF_TEXT_DEFAULT; #else end_of_text_addr = text_addr + addr + text_size; /* Relocate */ #endif symfile_bfd = objfile->obfd; /* For next_text_symbol */ abfd = objfile->obfd; symbuf_end = symbuf_idx = 0; next_symbol_text_func = dbx_next_symbol_text; for (symnum = 0; symnum < nlistlen; symnum++) { /* Get the symbol for this run and pull out some info */ QUIT; /* allow this to be interruptable */ if (symbuf_idx == symbuf_end) fill_symbuf (abfd); bufp = &symbuf[symbuf_idx++]; /* * Special case to speed up readin. */ if (bufp->n_type == (unsigned char)N_SLINE) continue; SWAP_SYMBOL (bufp, abfd); /* Ok. There is a lot of code duplicated in the rest of this switch statement (for efficiency reasons). Since I don't like duplicating code, I will do my penance here, and describe the code which is duplicated: *) The assignment to namestring. *) The call to strchr. *) The addition of a partial symbol the the two partial symbol lists. This last is a large section of code, so I've imbedded it in the following macro. */ /* Set namestring based on bufp. If the string table index is invalid, give a fake name, and print a single error message per symbol file read, rather than abort the symbol reading or flood the user with messages. */ #define SET_NAMESTRING()\ if (((unsigned)bufp->n_strx) >= stringtab_size) { \ complain (&string_table_offset_complaint, (char *) symnum); \ namestring = "foo"; \ } else \ namestring = bufp->n_strx + stringtab #define CUR_SYMBOL_TYPE bufp->n_type #define CUR_SYMBOL_VALUE bufp->n_value #define DBXREAD_ONLY #define START_PSYMTAB(ofile,addr,fname,low,symoff,global_syms,static_syms)\ start_psymtab(ofile, addr, fname, low, symoff, global_syms, static_syms) #define END_PSYMTAB(pst,ilist,ninc,c_off,c_text,dep_list,n_deps)\ end_psymtab(pst,ilist,ninc,c_off,c_text,dep_list,n_deps) #include "partial-stab.h" } /* If there's stuff to be cleaned up, clean it up. */ if (nlistlen > 0 /* We have some syms */ && entry_point < bufp->n_value && entry_point >= last_o_file_start) { startup_file_start = last_o_file_start; startup_file_end = bufp->n_value; } if (pst) { end_psymtab (pst, psymtab_include_list, includes_used, symnum * symbol_size, end_of_text_addr, dependency_list, dependencies_used); } free_bincl_list (objfile); discard_cleanups (old_chain); } /* Allocate and partially fill a partial symtab. It will be completely filled at the end of the symbol list. SYMFILE_NAME is the name of the symbol-file we are reading from, and ADDR is the address relative to which its symbols are (incremental) or 0 (normal). */ struct partial_symtab * start_psymtab (objfile, addr, filename, textlow, ldsymoff, global_syms, static_syms) struct objfile *objfile; CORE_ADDR addr; char *filename; CORE_ADDR textlow; int ldsymoff; struct partial_symbol *global_syms; struct partial_symbol *static_syms; { struct partial_symtab *result = start_psymtab_common(objfile, addr, filename, textlow, global_syms, static_syms); result->read_symtab_private = (char *) obstack_alloc (&objfile -> psymbol_obstack, sizeof (struct symloc)); LDSYMOFF(result) = ldsymoff; result->read_symtab = dbx_psymtab_to_symtab; return result; } /* Close off the current usage of a partial_symbol table entry. This involves setting the correct number of includes (with a realloc), setting the high text mark, setting the symbol length in the executable, and setting the length of the global and static lists of psymbols. The global symbols and static symbols are then seperately sorted. Then the partial symtab is put on the global list. *** List variables and peculiarities of same. *** */ void end_psymtab (pst, include_list, num_includes, capping_symbol_offset, capping_text, dependency_list, number_dependencies) struct partial_symtab *pst; char **include_list; int num_includes; int capping_symbol_offset; CORE_ADDR capping_text; struct partial_symtab **dependency_list; int number_dependencies; /* struct partial_symbol *capping_global, *capping_static;*/ { int i; struct objfile *objfile = pst -> objfile; if (capping_symbol_offset != -1) LDSYMLEN(pst) = capping_symbol_offset - LDSYMOFF(pst); pst->texthigh = capping_text; pst->n_global_syms = objfile->global_psymbols.next - (objfile->global_psymbols.list + pst->globals_offset); pst->n_static_syms = objfile->static_psymbols.next - (objfile->static_psymbols.list + pst->statics_offset); pst->number_of_dependencies = number_dependencies; if (number_dependencies) { pst->dependencies = (struct partial_symtab **) obstack_alloc (&objfile->psymbol_obstack, number_dependencies * sizeof (struct partial_symtab *)); memcpy (pst->dependencies, dependency_list, number_dependencies * sizeof (struct partial_symtab *)); } else pst->dependencies = 0; for (i = 0; i < num_includes; i++) { struct partial_symtab *subpst = allocate_psymtab (include_list[i], objfile); subpst->addr = pst->addr; subpst->read_symtab_private = (char *) obstack_alloc (&objfile->psymbol_obstack, sizeof (struct symloc)); LDSYMOFF(subpst) = LDSYMLEN(subpst) = subpst->textlow = subpst->texthigh = 0; /* We could save slight bits of space by only making one of these, shared by the entire set of include files. FIXME-someday. */ subpst->dependencies = (struct partial_symtab **) obstack_alloc (&objfile->psymbol_obstack, sizeof (struct partial_symtab *)); subpst->dependencies[0] = pst; subpst->number_of_dependencies = 1; subpst->globals_offset = subpst->n_global_syms = subpst->statics_offset = subpst->n_static_syms = 0; subpst->readin = 0; subpst->symtab = 0; subpst->read_symtab = dbx_psymtab_to_symtab; } sort_pst_symbols (pst); /* If there is already a psymtab or symtab for a file of this name, remove it. (If there is a symtab, more drastic things also happen.) This happens in VxWorks. */ free_named_symtabs (pst->filename); if (num_includes == 0 && number_dependencies == 0 && pst->n_global_syms == 0 && pst->n_static_syms == 0) { /* Throw away this psymtab, it's empty. We can't deallocate it, since it is on the obstack, but we can forget to chain it on the list. */ ; } } static void psymtab_to_symtab_1 (pst, stringtab, stringtab_size, sym_offset) struct partial_symtab *pst; char *stringtab; int stringtab_size; int sym_offset; { struct cleanup *old_chain; int i; if (!pst) return; if (pst->readin) { fprintf (stderr, "Psymtab for %s already read in. Shouldn't happen.\n", pst->filename); return; } /* Read in all partial symtabs on which this one is dependent */ for (i = 0; i < pst->number_of_dependencies; i++) if (!pst->dependencies[i]->readin) { /* Inform about additional files that need to be read in. */ if (info_verbose) { fputs_filtered (" ", stdout); wrap_here (""); fputs_filtered ("and ", stdout); wrap_here (""); printf_filtered ("%s...", pst->dependencies[i]->filename); wrap_here (""); /* Flush output */ fflush (stdout); } psymtab_to_symtab_1 (pst->dependencies[i], stringtab, stringtab_size, sym_offset); } if (LDSYMLEN(pst)) /* Otherwise it's a dummy */ { /* Init stuff necessary for reading in symbols */ buildsym_init (); old_chain = make_cleanup (really_free_pendings, 0); /* Read in this files symbols */ bfd_seek (pst->objfile->obfd, sym_offset, L_SET); pst->symtab = read_ofile_symtab (pst->objfile, stringtab, stringtab_size, LDSYMOFF(pst), LDSYMLEN(pst), pst->textlow, pst->texthigh - pst->textlow, pst->addr); sort_symtab_syms (pst->symtab); do_cleanups (old_chain); } pst->readin = 1; } /* * Read in all of the symbols for a given psymtab for real. * Be verbose about it if the user wants that. */ static void dbx_psymtab_to_symtab (pst) struct partial_symtab *pst; { char *stringtab; int stsize, val; bfd *sym_bfd; long st_temp; if (!pst) return; if (pst->readin) { fprintf (stderr, "Psymtab for %s already read in. Shouldn't happen.\n", pst->filename); return; } if (LDSYMLEN(pst) || pst->number_of_dependencies) { /* Print the message now, before reading the string table, to avoid disconcerting pauses. */ if (info_verbose) { printf_filtered ("Reading in symbols for %s...", pst->filename); fflush (stdout); } sym_bfd = pst->objfile->obfd; /* We keep the string table for the main symfile resident in memory, but not the string table for any other symbol files. */ if (symfile_objfile != pst->objfile) { /* Read in the string table */ /* FIXME, this uses internal BFD variables. See above in dbx_symbol_file_open where the macro is defined! */ bfd_seek (sym_bfd, STRING_TABLE_OFFSET, L_SET); val = bfd_read (&st_temp, sizeof st_temp, 1, sym_bfd); if (val < 0) perror_with_name (pst->objfile->name); stsize = bfd_h_get_32 (sym_bfd, (unsigned char *)&st_temp); #if 0 /* BFD doesn't provide a way to know the total file size, sigh */ struct stat statbuf; if (fstat (desc, &statbuf) < 0) perror_with_name (pst->objfile->name); if (stsize >= 0 && stsize < statbuf.st_size) #else if (stsize >= 0) #endif { #ifdef BROKEN_LARGE_ALLOCA stringtab = (char *) (*pst->objfile->xmalloc) (stsize); make_cleanup (pst->objfile->free, stringtab); #else stringtab = (char *) alloca (stsize); #endif } else stringtab = NULL; if (stringtab == NULL && stsize != 0) error ("ridiculous string table size: %d bytes", stsize); /* FIXME, this uses internal BFD variables. See above in dbx_symbol_file_open where the macro is defined! */ val = bfd_seek (sym_bfd, STRING_TABLE_OFFSET, L_SET); if (val < 0) perror_with_name (pst->objfile->name); val = bfd_read (stringtab, stsize, 1, sym_bfd); if (val < 0) perror_with_name (pst->objfile->name); } else { stringtab = symfile_string_table; stsize = symfile_string_table_size; } /* FIXME POKING INSIDE BFD DATA STRUCTURES */ symbol_size = obj_symbol_entry_size (sym_bfd); next_symbol_text_func = dbx_next_symbol_text; /* FIXME, this uses internal BFD variables. See above in dbx_symbol_file_open where the macro is defined! */ psymtab_to_symtab_1 (pst, stringtab, stsize, SYMBOL_TABLE_OFFSET); /* Match with global symbols. This only needs to be done once, after all of the symtabs and dependencies have been read in. */ scan_file_globals (pst->objfile); /* Finish up the debug error message. */ if (info_verbose) printf_filtered ("done.\n"); } } /* * Read in a defined section of a specific object file's symbols. * * DESC is the file descriptor for the file, positioned at the * beginning of the symtab * STRINGTAB is a pointer to the files string * table, already read in * SYM_OFFSET is the offset within the file of * the beginning of the symbols we want to read, NUM_SUMBOLS is the * number of symbols to read * TEXT_OFFSET is the beginning of the text segment we are reading symbols for * TEXT_SIZE is the size of the text segment read in. * OFFSET is a relocation offset which gets added to each symbol */ static struct symtab * read_ofile_symtab (objfile, stringtab, stringtab_size, sym_offset, sym_size, text_offset, text_size, offset) struct objfile *objfile; register char *stringtab; unsigned int stringtab_size; int sym_offset; int sym_size; CORE_ADDR text_offset; int text_size; int offset; { register char *namestring; register struct internal_nlist *bufp; unsigned char type; unsigned max_symnum; register bfd *abfd; current_objfile = objfile; subfile_stack = 0; stringtab_global = stringtab; last_source_file = 0; abfd = objfile->obfd; symfile_bfd = objfile->obfd; /* Implicit param to next_text_symbol */ our_objfile = objfile; /* For end_symtab calls in process_one_symbol */ symbuf_end = symbuf_idx = 0; /* It is necessary to actually read one symbol *before* the start of this symtab's symbols, because the GCC_COMPILED_FLAG_SYMBOL occurs before the N_SO symbol. Detecting this in read_dbx_symtab would slow down initial readin, so we look for it here instead. */ if (sym_offset >= (int)symbol_size) { bfd_seek (symfile_bfd, sym_offset - symbol_size, L_INCR); fill_symbuf (abfd); bufp = &symbuf[symbuf_idx++]; SWAP_SYMBOL (bufp, abfd); SET_NAMESTRING (); processing_gcc_compilation = (bufp->n_type == N_TEXT && (strcmp (namestring, GCC_COMPILED_FLAG_SYMBOL) == 0 || strcmp(namestring, GCC2_COMPILED_FLAG_SYMBOL) == 0)); } else { /* The N_SO starting this symtab is the first symbol, so we better not check the symbol before it. I'm not this can happen, but it doesn't hurt to check for it. */ bfd_seek (symfile_bfd, sym_offset, L_INCR); processing_gcc_compilation = 0; } if (symbuf_idx == symbuf_end) fill_symbuf (abfd); bufp = &symbuf[symbuf_idx]; if (bufp->n_type != (unsigned char)N_SO) error("First symbol in segment of executable not a source symbol"); max_symnum = sym_size / symbol_size; for (symnum = 0; symnum < max_symnum; symnum++) { QUIT; /* Allow this to be interruptable */ if (symbuf_idx == symbuf_end) fill_symbuf(abfd); bufp = &symbuf[symbuf_idx++]; SWAP_SYMBOL (bufp, abfd); type = bufp->n_type; if (type == (unsigned char)N_CATCH) { /* N_CATCH is not fixed up by the linker, and unfortunately, there's no other place to put it in the .stab map. */ bufp->n_value += text_offset - offset; } SET_NAMESTRING (); if (type & N_STAB) { process_one_symbol (type, bufp->n_desc, bufp->n_value, namestring, offset); /* our_objfile is an implicit parameter. */ } /* We skip checking for a new .o or -l file; that should never happen in this routine. */ else if (type == N_TEXT && (strcmp (namestring, GCC_COMPILED_FLAG_SYMBOL) == 0 || strcmp (namestring, GCC2_COMPILED_FLAG_SYMBOL) == 0)) /* I don't think this code will ever be executed, because the GCC_COMPILED_FLAG_SYMBOL usually is right before the N_SO symbol which starts this source file. However, there is no reason not to accept the GCC_COMPILED_FLAG_SYMBOL anywhere. */ processing_gcc_compilation = 1; else if (type & N_EXT || type == (unsigned char)N_TEXT || type == (unsigned char)N_NBTEXT ) { /* Global symbol: see if we came across a dbx defintion for a corresponding symbol. If so, store the value. Remove syms from the chain when their values are stored, but search the whole chain, as there may be several syms from different files with the same name. */ /* This is probably not true. Since the files will be read in one at a time, each reference to a global symbol will be satisfied in each file as it appears. So we skip this section. */ ; } } current_objfile = NULL; return (end_symtab (text_offset + text_size, 0, 0, objfile)); } /* This handles a single symbol from the symbol-file, building symbols into a GDB symtab. It takes these arguments and an implicit argument. TYPE is the type field of the ".stab" symbol entry. DESC is the desc field of the ".stab" entry. VALU is the value field of the ".stab" entry. NAME is the symbol name, in our address space. OFFSET is the amount by which this object file was relocated when it was loaded into memory. All symbols that refer to memory locations need to be offset by this amount. The implicit argument is: OUR_OBJFILE is the object file from which we are reading symbols. It is used in end_symtab. */ void process_one_symbol (type, desc, valu, name, offset) int type, desc; CORE_ADDR valu; char *name; int offset; { #ifndef SUN_FIXED_LBRAC_BUG /* This records the last pc address we've seen. We depend on there being an SLINE or FUN or SO before the first LBRAC, since the variable does not get reset in between reads of different symbol files. */ static CORE_ADDR last_pc_address; #endif register struct context_stack *new; char *colon_pos; /* Something is wrong if we see real data before seeing a source file name. */ if (last_source_file == 0 && type != (unsigned char)N_SO) { /* Currently this ignores N_ENTRY on Gould machines, N_NSYM on machines where that code is defined. */ if (IGNORE_SYMBOL (type)) return; /* FIXME, this should not be an error, since it precludes extending the symbol table information in this way... */ error ("Invalid symbol data: does not start by identifying a source file."); } switch (type) { case N_FUN: case N_FNAME: #if 0 /* It seems that the Sun ANSI C compiler (acc) replaces N_FUN with N_GSYM and N_STSYM with a type code of f or F. Can't enable this until we get some stuff straightened out with psymtabs. */ case N_GSYM: case N_STSYM: #endif /* 0 */ valu += offset; /* Relocate for dynamic loading */ /* Either of these types of symbols indicates the start of a new function. We must process its "name" normally for dbx, but also record the start of a new lexical context, and possibly also the end of the lexical context for the previous function. */ /* This is not always true. This type of symbol may indicate a text segment variable. */ colon_pos = strchr (name, ':'); if (!colon_pos++ || (*colon_pos != 'f' && *colon_pos != 'F')) { define_symbol (valu, name, desc, type, our_objfile); break; } #ifndef SUN_FIXED_LBRAC_BUG last_pc_address = valu; /* Save for SunOS bug circumcision */ #endif within_function = 1; if (context_stack_depth > 0) { new = pop_context (); /* Make a block for the local symbols within. */ finish_block (new->name, &local_symbols, new->old_blocks, new->start_addr, valu, our_objfile); } /* Stack must be empty now. */ if (context_stack_depth != 0) complain (&lbrac_unmatched_complaint, (char *) symnum); new = push_context (0, valu); new->name = define_symbol (valu, name, desc, type, our_objfile); break; case N_CATCH: /* Record the address at which this catch takes place. */ define_symbol (valu+offset, name, desc, type, our_objfile); break; case N_LBRAC: /* This "symbol" just indicates the start of an inner lexical context within a function. */ #if defined (BLOCK_ADDRESS_ABSOLUTE) valu += offset; /* Relocate for dynamic loading */ #else /* On most machines, the block addresses are relative to the N_SO, the linker did not relocate them (sigh). */ valu += last_source_start_addr; #endif #ifndef SUN_FIXED_LBRAC_BUG if (valu < last_pc_address) { /* Patch current LBRAC pc value to match last handy pc value */ complain (&lbrac_complaint, 0); valu = last_pc_address; } #endif new = push_context (desc, valu); break; case N_RBRAC: /* This "symbol" just indicates the end of an inner lexical context that was started with N_LBRAC. */ #if defined (BLOCK_ADDRESS_ABSOLUTE) valu += offset; /* Relocate for dynamic loading */ #else /* On most machines, the block addresses are relative to the N_SO, the linker did not relocate them (sigh). */ valu += last_source_start_addr; #endif new = pop_context(); if (desc != new->depth) complain (&lbrac_mismatch_complaint, (char *) symnum); /* Some compilers put the variable decls inside of an LBRAC/RBRAC block. This macro should be nonzero if this is true. DESC is N_DESC from the N_RBRAC symbol. GCC_P is true if we've detected the GCC_COMPILED_SYMBOL or the GCC2_COMPILED_SYMBOL. */ #if !defined (VARIABLES_INSIDE_BLOCK) #define VARIABLES_INSIDE_BLOCK(desc, gcc_p) 0 #endif /* Can only use new->locals as local symbols here if we're in gcc or on a machine that puts them before the lbrack. */ if (!VARIABLES_INSIDE_BLOCK(desc, processing_gcc_compilation)) local_symbols = new->locals; /* If this is not the outermost LBRAC...RBRAC pair in the function, its local symbols preceded it, and are the ones just recovered from the context stack. Defined the block for them. If this is the outermost LBRAC...RBRAC pair, there is no need to do anything; leave the symbols that preceded it to be attached to the function's own block. However, if it is so, we need to indicate that we just moved outside of the function. */ if (local_symbols && (context_stack_depth > !VARIABLES_INSIDE_BLOCK(desc, processing_gcc_compilation))) { /* FIXME Muzzle a compiler bug that makes end < start. */ if (new->start_addr > valu) { complain(&lbrac_rbrac_complaint, 0); new->start_addr = valu; } /* Make a block for the local symbols within. */ finish_block (0, &local_symbols, new->old_blocks, new->start_addr, valu, our_objfile); } else { within_function = 0; } if (VARIABLES_INSIDE_BLOCK(desc, processing_gcc_compilation)) /* Now pop locals of block just finished. */ local_symbols = new->locals; break; case N_FN: case N_FN_SEQ: /* This kind of symbol indicates the start of an object file. */ valu += offset; /* Relocate for dynamic loading */ break; case N_SO: /* This type of symbol indicates the start of data for one source file. Finish the symbol table of the previous source file (if any) and start accumulating a new symbol table. */ valu += offset; /* Relocate for dynamic loading */ #ifndef SUN_FIXED_LBRAC_BUG last_pc_address = valu; /* Save for SunOS bug circumcision */ #endif #ifdef PCC_SOL_BROKEN /* pcc bug, occasionally puts out SO for SOL. */ if (context_stack_depth > 0) { start_subfile (name, NULL); break; } #endif if (last_source_file) { /* Check if previous symbol was also an N_SO (with some sanity checks). If so, that one was actually the directory name, and the current one is the real file name. Patch things up. */ if (previous_stab_code == N_SO && current_subfile && current_subfile->dirname == NULL && current_subfile->name != NULL && current_subfile->name[strlen(current_subfile->name)-1] == '/') { current_subfile->dirname = current_subfile->name; current_subfile->name = obsavestring (name, strlen (name), &our_objfile -> symbol_obstack); break; } (void) end_symtab (valu, 0, 0, our_objfile); } start_symtab (name, NULL, valu); break; case N_SOL: /* This type of symbol indicates the start of data for a sub-source-file, one whose contents were copied or included in the compilation of the main source file (whose name was given in the N_SO symbol.) */ valu += offset; /* Relocate for dynamic loading */ start_subfile (name, NULL); break; case N_BINCL: push_subfile (); add_new_header_file (name, valu); start_subfile (name, NULL); break; case N_EINCL: start_subfile (pop_subfile (), NULL); break; case N_EXCL: add_old_header_file (name, valu); break; case N_SLINE: /* This type of "symbol" really just records one line-number -- core-address correspondence. Enter it in the line list for this symbol table. */ valu += offset; /* Relocate for dynamic loading */ #ifndef SUN_FIXED_LBRAC_BUG last_pc_address = valu; /* Save for SunOS bug circumcision */ #endif record_line (current_subfile, desc, valu); break; case N_BCOMM: if (common_block) error ("Invalid symbol data: common within common at symtab pos %d", symnum); common_block = local_symbols; common_block_i = local_symbols ? local_symbols->nsyms : 0; break; case N_ECOMM: /* Symbols declared since the BCOMM are to have the common block start address added in when we know it. common_block points to the first symbol after the BCOMM in the local_symbols list; copy the list and hang it off the symbol for the common block name for later fixup. */ { int i; struct symbol *sym = (struct symbol *) (*our_objfile -> xmalloc) (sizeof (struct symbol)); bzero (sym, sizeof *sym); SYMBOL_NAME (sym) = savestring (name, strlen (name)); SYMBOL_CLASS (sym) = LOC_BLOCK; SYMBOL_NAMESPACE (sym) = (enum namespace)((long) copy_pending (local_symbols, common_block_i, common_block)); i = hashname (SYMBOL_NAME (sym)); SYMBOL_VALUE_CHAIN (sym) = global_sym_chain[i]; global_sym_chain[i] = sym; common_block = 0; break; } /* The following symbol types need to have the offset added to their value; then we process symbol definitions in the name. */ case N_STSYM: /* Global symbol */ case N_LCSYM: /* Local symbol */ case N_DSLINE: /* Source line number, data seg */ case N_BSLINE: /* Source line number, bss seg */ /* N_BROWS: overlaps with N_BSLINE */ case N_ENTRY: /* Alternate entry point */ valu += offset; /* Relocate for dynamic loading */ /* FALL THROUGH */ /* The following symbol types don't need the address field relocated, since it is either unused, or is absolute. */ case N_GSYM: /* Global variable */ case N_NSYMS: /* Number of symbols (ultrix) */ case N_NOMAP: /* No map? (ultrix) */ case N_RSYM: /* Register variable */ case N_DEFD: /* Modula-2 GNU module dependency */ case N_SSYM: /* Struct or union element */ case N_LSYM: /* Local symbol in stack */ case N_PSYM: /* Parameter variable */ case N_LENG: /* Length of preceding symbol type */ if (name) define_symbol (valu, name, desc, type, our_objfile); break; /* The following symbol types we don't know how to process. Handle them in a "default" way, but complain to people who care. */ default: case N_EHDECL: /* Exception handler name */ case N_MAIN: /* Name of main routine (not used in C) */ case N_PC: /* Global symbol in Pascal */ case N_M2C: /* Modula-2 compilation unit */ /* N_MOD2: overlaps with N_EHDECL */ case N_SCOPE: /* Modula-2 scope information */ case N_ECOML: /* End common (local name) */ case N_NBTEXT: /* Gould Non-Base-Register symbols??? */ case N_NBDATA: case N_NBBSS: case N_NBSTS: case N_NBLCS: complain (&unknown_symtype_complaint, local_hex_string(type)); if (name) define_symbol (valu, name, desc, type, our_objfile); } previous_stab_code = type; } /* Copy a pending list, used to record the contents of a common block for later fixup. */ static struct pending * copy_pending (beg, begi, end) struct pending *beg; int begi; struct pending *end; { struct pending *new = 0; struct pending *next; for (next = beg; next != 0 && (next != end || begi < end->nsyms); next = next->next, begi = 0) { register int j; for (j = begi; j < next->nsyms; j++) add_symbol_to_list (next->symbol[j], &new); } return new; } /* Register our willingness to decode symbols for SunOS and a.out and b.out files handled by BFD... */ static struct sym_fns sunos_sym_fns = {"sunOs", 6, dbx_new_init, dbx_symfile_init, dbx_symfile_read}; static struct sym_fns aout_sym_fns = {"a.out", 5, dbx_new_init, dbx_symfile_init, dbx_symfile_read}; static struct sym_fns bout_sym_fns = {"b.out", 5, dbx_new_init, dbx_symfile_init, dbx_symfile_read}; void _initialize_dbxread () { add_symtab_fns(&sunos_sym_fns); add_symtab_fns(&aout_sym_fns); add_symtab_fns(&bout_sym_fns); }