/* Parameters for execution on any Hewlett-Packard PA-RISC machine. Copyright 1986, 1987, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc. Contributed by the Center for Software Science at the University of Utah (pa-gdb-bugs@cs.utah.edu). This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include "regcache.h" #define GDB_MULTI_ARCH 0 /* NOTE: cagney/2002-11-24: This is a guess. */ #define DEPRECATED_USE_GENERIC_DUMMY_FRAMES 0 #define CALL_DUMMY_LOCATION ON_STACK #define DEPRECATED_PC_IN_CALL_DUMMY(pc, sp, frame_address) deprecated_pc_in_call_dummy_on_stack (pc, sp, frame_address) #define DEPRECATED_INIT_FRAME_PC(l,f) (init_frame_pc_default (l, f)) /* Forward declarations of some types we use in prototypes */ struct frame_info; struct frame_saved_regs; struct value; struct type; struct inferior_status; /* By default assume we don't have to worry about software floating point. */ #ifndef SOFT_FLOAT #define SOFT_FLOAT 0 #endif /* Get at various relevent fields of an instruction word. */ #define MASK_5 0x1f #define MASK_11 0x7ff #define MASK_14 0x3fff #define MASK_21 0x1fffff /* This macro gets bit fields using HP's numbering (MSB = 0) */ #ifndef GET_FIELD #define GET_FIELD(X, FROM, TO) \ ((X) >> (31 - (TO)) & ((1 << ((TO) - (FROM) + 1)) - 1)) #endif #if !GDB_MULTI_ARCH extern int hppa_reg_struct_has_addr (int gcc_p, struct type *type); #define REG_STRUCT_HAS_ADDR(gcc_p,type) hppa_reg_struct_has_addr (gcc_p,type) #endif /* Offset from address of function to start of its code. Zero on most machines. */ #if !GDB_MULTI_ARCH #define FUNCTION_START_OFFSET 0 #endif /* Advance PC across any function entry prologue instructions to reach some "real" code. */ #if !GDB_MULTI_ARCH extern CORE_ADDR hppa_skip_prologue (CORE_ADDR); #define SKIP_PROLOGUE(pc) (hppa_skip_prologue (pc)) #endif /* If PC is in some function-call trampoline code, return the PC where the function itself actually starts. If not, return NULL. */ #if !GDB_MULTI_ARCH #define SKIP_TRAMPOLINE_CODE(pc) hppa_skip_trampoline_code (pc) extern CORE_ADDR hppa_skip_trampoline_code (CORE_ADDR); #endif /* Return non-zero if we are in an appropriate trampoline. */ #if !GDB_MULTI_ARCH #define IN_SOLIB_CALL_TRAMPOLINE(pc, name) \ hppa_in_solib_call_trampoline (pc, name) extern int hppa_in_solib_call_trampoline (CORE_ADDR, char *); #endif #if !GDB_MULTI_ARCH #define IN_SOLIB_RETURN_TRAMPOLINE(pc, name) \ hppa_in_solib_return_trampoline (pc, name) extern int hppa_in_solib_return_trampoline (CORE_ADDR, char *); #endif #if !GDB_MULTI_ARCH #undef SAVED_PC_AFTER_CALL #define SAVED_PC_AFTER_CALL(frame) hppa_saved_pc_after_call (frame) extern CORE_ADDR hppa_saved_pc_after_call (struct frame_info *); #endif #if !GDB_MULTI_ARCH extern int hppa_inner_than (CORE_ADDR lhs, CORE_ADDR rhs); #define INNER_THAN(lhs,rhs) hppa_inner_than(lhs,rhs) #endif #if !GDB_MULTI_ARCH extern CORE_ADDR hppa_stack_align (CORE_ADDR sp); #define STACK_ALIGN(sp) hppa_stack_align (sp) #endif #if !GDB_MULTI_ARCH #define EXTRA_STACK_ALIGNMENT_NEEDED 0 #endif /* Sequence of bytes for breakpoint instruction. */ #define BREAKPOINT {0x00, 0x01, 0x00, 0x04} #define BREAKPOINT32 0x10004 /* Amount PC must be decremented by after a breakpoint. This is often the number of bytes in BREAKPOINT but not always. Not on the PA-RISC */ #if !GDB_MULTI_ARCH #define DECR_PC_AFTER_BREAK 0 #endif extern int hppa_pc_requires_run_before_use (CORE_ADDR pc); #define PC_REQUIRES_RUN_BEFORE_USE(pc) hppa_pc_requires_run_before_use (pc) /* Say how long (ordinary) registers are. This is a piece of bogosity used in push_word and a few other places; REGISTER_RAW_SIZE is the real way to know how big a register is. */ #if !GDB_MULTI_ARCH #define REGISTER_SIZE 4 #endif /* Number of machine registers */ #if !GDB_MULTI_ARCH #define NUM_REGS 128 #endif /* Initializer for an array of names of registers. There should be NUM_REGS strings in this initializer. They are in rows of eight entries */ #define REGISTER_NAMES \ {"flags", "r1", "rp", "r3", "r4", "r5", "r6", "r7", \ "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", \ "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23", \ "r24", "r25", "r26", "dp", "ret0", "ret1", "sp", "r31", \ "sar", "pcoqh", "pcsqh", "pcoqt", "pcsqt", "eiem", "iir", "isr", \ "ior", "ipsw", "goto", "sr4", "sr0", "sr1", "sr2", "sr3", \ "sr5", "sr6", "sr7", "cr0", "cr8", "cr9", "ccr", "cr12", \ "cr13", "cr24", "cr25", "cr26", "mpsfu_high","mpsfu_low","mpsfu_ovflo","pad",\ "fpsr", "fpe1", "fpe2", "fpe3", "fpe4", "fpe5", "fpe6", "fpe7", \ "fr4", "fr4R", "fr5", "fr5R", "fr6", "fr6R", "fr7", "fr7R", \ "fr8", "fr8R", "fr9", "fr9R", "fr10", "fr10R", "fr11", "fr11R", \ "fr12", "fr12R", "fr13", "fr13R", "fr14", "fr14R", "fr15", "fr15R", \ "fr16", "fr16R", "fr17", "fr17R", "fr18", "fr18R", "fr19", "fr19R", \ "fr20", "fr20R", "fr21", "fr21R", "fr22", "fr22R", "fr23", "fr23R", \ "fr24", "fr24R", "fr25", "fr25R", "fr26", "fr26R", "fr27", "fr27R", \ "fr28", "fr28R", "fr29", "fr29R", "fr30", "fr30R", "fr31", "fr31R"} /* Register numbers of various important registers. Note that some of these values are "real" register numbers, and correspond to the general registers of the machine, and some are "phony" register numbers which are too large to be actual register numbers as far as the user is concerned but do serve to get the desired values when passed to read_register. */ #define R0_REGNUM 0 /* Doesn't actually exist, used as base for other r registers. */ #define FLAGS_REGNUM 0 /* Various status flags */ #define RP_REGNUM 2 /* return pointer */ #if !GDB_MULTI_ARCH #define FP_REGNUM 3 /* Contains address of executing stack */ /* frame */ #endif #if !GDB_MULTI_ARCH #define SP_REGNUM 30 /* Contains address of top of stack */ #endif #define SAR_REGNUM 32 /* Shift Amount Register */ #define IPSW_REGNUM 41 /* Interrupt Processor Status Word */ #define PCOQ_HEAD_REGNUM 33 /* instruction offset queue head */ #define PCSQ_HEAD_REGNUM 34 /* instruction space queue head */ #define PCOQ_TAIL_REGNUM 35 /* instruction offset queue tail */ #define PCSQ_TAIL_REGNUM 36 /* instruction space queue tail */ #define EIEM_REGNUM 37 /* External Interrupt Enable Mask */ #define IIR_REGNUM 38 /* Interrupt Instruction Register */ #define IOR_REGNUM 40 /* Interrupt Offset Register */ #define SR4_REGNUM 43 /* space register 4 */ #define RCR_REGNUM 51 /* Recover Counter (also known as cr0) */ #define CCR_REGNUM 54 /* Coprocessor Configuration Register */ #define TR0_REGNUM 57 /* Temporary Registers (cr24 -> cr31) */ #define CR27_REGNUM 60 /* Base register for thread-local storage, cr27 */ #if !GDB_MULTI_ARCH #define FP0_REGNUM 64 /* floating point reg. 0 (fspr) */ #endif #define FP4_REGNUM 72 #define ARG0_REGNUM 26 /* The first argument of a callee. */ #define ARG1_REGNUM 25 /* The second argument of a callee. */ #define ARG2_REGNUM 24 /* The third argument of a callee. */ #define ARG3_REGNUM 23 /* The fourth argument of a callee. */ /* compatibility with the rest of gdb. */ #if !GDB_MULTI_ARCH #define PC_REGNUM PCOQ_HEAD_REGNUM #endif #if !GDB_MULTI_ARCH #define NPC_REGNUM PCOQ_TAIL_REGNUM #endif /* * Processor Status Word Masks */ #define PSW_T 0x01000000 /* Taken Branch Trap Enable */ #define PSW_H 0x00800000 /* Higher-Privilege Transfer Trap Enable */ #define PSW_L 0x00400000 /* Lower-Privilege Transfer Trap Enable */ #define PSW_N 0x00200000 /* PC Queue Front Instruction Nullified */ #define PSW_X 0x00100000 /* Data Memory Break Disable */ #define PSW_B 0x00080000 /* Taken Branch in Previous Cycle */ #define PSW_C 0x00040000 /* Code Address Translation Enable */ #define PSW_V 0x00020000 /* Divide Step Correction */ #define PSW_M 0x00010000 /* High-Priority Machine Check Disable */ #define PSW_CB 0x0000ff00 /* Carry/Borrow Bits */ #define PSW_R 0x00000010 /* Recovery Counter Enable */ #define PSW_Q 0x00000008 /* Interruption State Collection Enable */ #define PSW_P 0x00000004 /* Protection ID Validation Enable */ #define PSW_D 0x00000002 /* Data Address Translation Enable */ #define PSW_I 0x00000001 /* External, Power Failure, Low-Priority */ /* Machine Check Interruption Enable */ /* When fetching register values from an inferior or a core file, clean them up using this macro. BUF is a char pointer to the raw value of the register in the registers[] array. */ #define DEPRECATED_CLEAN_UP_REGISTER_VALUE(regno, buf) \ do { \ if ((regno) == PCOQ_HEAD_REGNUM || (regno) == PCOQ_TAIL_REGNUM) \ (buf)[sizeof(CORE_ADDR) -1] &= ~0x3; \ } while (0) /* Define DEPRECATED_DO_REGISTERS_INFO() to do machine-specific formatting of register dumps. */ #define DEPRECATED_DO_REGISTERS_INFO(_regnum, fp) pa_do_registers_info (_regnum, fp) extern void pa_do_registers_info (int, int); #if 0 #define STRCAT_REGISTER(regnum, fpregs, stream, precision) pa_do_strcat_registers_info (regnum, fpregs, stream, precision) extern void pa_do_strcat_registers_info (int, int, struct ui_file *, enum precision_type); #endif /* PA specific macro to see if the current instruction is nullified. */ #ifndef INSTRUCTION_NULLIFIED extern int hppa_instruction_nullified (void); #define INSTRUCTION_NULLIFIED hppa_instruction_nullified () #endif /* Number of bytes of storage in the actual machine representation for register N. On the PA-RISC, all regs are 4 bytes, including the FP registers (they're accessed as two 4 byte halves). */ #if !GDB_MULTI_ARCH extern int hppa_register_raw_size (int reg_nr); #define REGISTER_RAW_SIZE(N) hppa_register_raw_size (N) #endif /* Total amount of space needed to store our copies of the machine's register state, the array `registers'. */ #if !GDB_MULTI_ARCH #define REGISTER_BYTES (NUM_REGS * 4) #endif #if !GDB_MULTI_ARCH extern int hppa_register_byte (int reg_nr); #define REGISTER_BYTE(N) hppa_register_byte (N) #endif /* Number of bytes of storage in the program's representation for register N. */ #if !GDB_MULTI_ARCH #define REGISTER_VIRTUAL_SIZE(N) REGISTER_RAW_SIZE(N) #endif /* Largest value REGISTER_RAW_SIZE can have. */ #if !GDB_MULTI_ARCH #define MAX_REGISTER_RAW_SIZE 4 #endif /* Largest value REGISTER_VIRTUAL_SIZE can have. */ #if !GDB_MULTI_ARCH #define MAX_REGISTER_VIRTUAL_SIZE 8 #endif #if !GDB_MULTI_ARCH extern struct type * hppa_register_virtual_type (int reg_nr); #define REGISTER_VIRTUAL_TYPE(N) hppa_register_virtual_type (N) #endif #if !GDB_MULTI_ARCH extern void hppa_store_struct_return (CORE_ADDR addr, CORE_ADDR sp); #define STORE_STRUCT_RETURN(ADDR, SP) hppa_store_struct_return (ADDR, SP) #endif /* Extract from an array REGBUF containing the (raw) register state a function return value of type TYPE, and copy that, in virtual format, into VALBUF. */ #if !GDB_MULTI_ARCH void hppa_extract_return_value (struct type *type, char *regbuf, char *valbuf); #define DEPRECATED_EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ hppa_extract_return_value (TYPE, REGBUF, VALBUF); #endif /* elz: decide whether the function returning a value of type type will put it on the stack or in the registers. The pa calling convention says that: register 28 (called ret0 by gdb) contains any ASCII char, and any non_floating point value up to 32-bits. reg 28 and 29 contain non-floating point up tp 64 bits and larger than 32 bits. (higer order word in reg 28). fr4: floating point up to 64 bits sr1: space identifier (32-bit) stack: any lager than 64-bit, with the address in r28 */ #if !GDB_MULTI_ARCH extern use_struct_convention_fn hppa_use_struct_convention; #define USE_STRUCT_CONVENTION(gcc_p,type) hppa_use_struct_convention (gcc_p,type) #endif /* Write into appropriate registers a function return value of type TYPE, given in virtual format. */ #if !GDB_MULTI_ARCH extern void hppa_store_return_value (struct type *type, char *valbuf); #define DEPRECATED_STORE_RETURN_VALUE(TYPE,VALBUF) \ hppa_store_return_value (TYPE, VALBUF); #endif #if !GDB_MULTI_ARCH extern CORE_ADDR hppa_extract_struct_value_address (char *regbuf); #define DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \ hppa_extract_struct_value_address (REGBUF) #endif /* elz: Return a large value, which is stored on the stack at addr. This is defined only for the hppa, at this moment. The above macro DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS is not called anymore, because it assumes that on exit from a called function which returns a large structure on the stack, the address of the ret structure is still in register 28. Unfortunately this register is usually overwritten by the called function itself, on hppa. This is specified in the calling convention doc. As far as I know, the only way to get the return value is to have the caller tell us where it told the callee to put it, rather than have the callee tell us. */ struct value *hppa_value_returned_from_stack (register struct type *valtype, CORE_ADDR addr); #define VALUE_RETURNED_FROM_STACK(valtype,addr) \ hppa_value_returned_from_stack (valtype, addr) #if !GDB_MULTI_ARCH extern int hppa_cannot_store_register (int regnum); #define CANNOT_STORE_REGISTER(regno) hppa_cannot_store_register (regno) #endif #if !GDB_MULTI_ARCH #define INIT_EXTRA_FRAME_INFO(fromleaf, frame) hppa_init_extra_frame_info (fromleaf, frame) extern void hppa_init_extra_frame_info (int, struct frame_info *); #endif /* Describe the pointer in each stack frame to the previous stack frame (its caller). */ /* FRAME_CHAIN takes a frame's nominal address and produces the frame's chain-pointer. */ /* In the case of the PA-RISC, the frame's nominal address is the address of a 4-byte word containing the calling frame's address (previous FP). */ #if !GDB_MULTI_ARCH #define FRAME_CHAIN(thisframe) hppa_frame_chain (thisframe) extern CORE_ADDR hppa_frame_chain (struct frame_info *); #endif #if !GDB_MULTI_ARCH extern int hppa_frame_chain_valid (CORE_ADDR, struct frame_info *); #define FRAME_CHAIN_VALID(chain, thisframe) hppa_frame_chain_valid (chain, thisframe) #endif /* Define other aspects of the stack frame. */ /* A macro that tells us whether the function invocation represented by FI does not have a frame on the stack associated with it. If it does not, FRAMELESS is set to 1, else 0. */ #if !GDB_MULTI_ARCH #define FRAMELESS_FUNCTION_INVOCATION(FI) \ (hppa_frameless_function_invocation (FI)) extern int hppa_frameless_function_invocation (struct frame_info *); #endif #if !GDB_MULTI_ARCH extern CORE_ADDR hppa_frame_saved_pc (struct frame_info *frame); #define FRAME_SAVED_PC(FRAME) hppa_frame_saved_pc (FRAME) #endif #if !GDB_MULTI_ARCH extern CORE_ADDR hppa_frame_args_address (struct frame_info *fi); #define FRAME_ARGS_ADDRESS(fi) hppa_frame_args_address (fi) #endif #if !GDB_MULTI_ARCH extern CORE_ADDR hppa_frame_locals_address (struct frame_info *fi); #define FRAME_LOCALS_ADDRESS(fi) hppa_frame_locals_address (fi) #endif #if !GDB_MULTI_ARCH extern int hppa_frame_num_args (struct frame_info *frame); #define FRAME_NUM_ARGS(fi) hppa_frame_num_args (fi) #endif #if !GDB_MULTI_ARCH #define FRAME_ARGS_SKIP 0 #endif #define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \ hppa_frame_find_saved_regs (frame_info, &frame_saved_regs) extern void hppa_frame_find_saved_regs (struct frame_info *, struct frame_saved_regs *); /* Things needed for making the inferior call functions. */ /* Push an empty stack frame, to record the current PC, etc. */ /* FIXME: brobecker 2002-12-26. This macro definition takes advantage of the fact that PUSH_DUMMY_FRAME is called within a function where a variable inf_status of type struct inferior_status * is defined. Ugh! Until this is fixed, we will not be able to move to multiarch partial. */ #define PUSH_DUMMY_FRAME hppa_push_dummy_frame (inf_status) extern void hppa_push_dummy_frame (struct inferior_status *); /* Discard from the stack the innermost frame, restoring all saved registers. */ #if !GDB_MULTI_ARCH #define POP_FRAME hppa_pop_frame () extern void hppa_pop_frame (void); #endif #define INSTRUCTION_SIZE 4 #ifndef PA_LEVEL_0 /* Non-level zero PA's have space registers (but they don't always have floating-point, do they???? */ /* This sequence of words is the instructions ; Call stack frame has already been built by gdb. Since we could be calling ; a varargs function, and we do not have the benefit of a stub to put things in ; the right place, we load the first 4 word of arguments into both the general ; and fp registers. call_dummy ldw -36(sp), arg0 ldw -40(sp), arg1 ldw -44(sp), arg2 ldw -48(sp), arg3 ldo -36(sp), r1 fldws 0(0, r1), fr4 fldds -4(0, r1), fr5 fldws -8(0, r1), fr6 fldds -12(0, r1), fr7 ldil 0, r22 ; FUNC_LDIL_OFFSET must point here ldo 0(r22), r22 ; FUNC_LDO_OFFSET must point here ldsid (0,r22), r4 ldil 0, r1 ; SR4EXPORT_LDIL_OFFSET must point here ldo 0(r1), r1 ; SR4EXPORT_LDO_OFFSET must point here ldsid (0,r1), r20 combt,=,n r4, r20, text_space ; If target is in data space, do a ble 0(sr5, r22) ; "normal" procedure call copy r31, r2 break 4, 8 mtsp r21, sr0 ble,n 0(sr0, r22) text_space ; Otherwise, go through _sr4export, ble (sr4, r1) ; which will return back here. stw r31,-24(r30) break 4, 8 mtsp r21, sr0 ble,n 0(sr0, r22) nop ; To avoid kernel bugs nop ; and keep the dummy 8 byte aligned The dummy decides if the target is in text space or data space. If it's in data space, there's no problem because the target can return back to the dummy. However, if the target is in text space, the dummy calls the secret, undocumented routine _sr4export, which calls a function in text space and can return to any space. Instead of including fake instructions to represent saved registers, we know that the frame is associated with the call dummy and treat it specially. The trailing NOPs are needed to avoid a bug in HPUX, BSD and OSF1 kernels. If the memory at the location pointed to by the PC is 0xffffffff then a ptrace step call will fail (even if the instruction is nullified). The code to pop a dummy frame single steps three instructions starting with the last mtsp. This includes the nullified "instruction" following the ble (which is uninitialized junk). If the "instruction" following the last BLE is 0xffffffff, then the ptrace will fail and the dummy frame is not correctly popped. By placing a NOP in the delay slot of the BLE instruction we can be sure that we never try to execute a 0xffffffff instruction and avoid the kernel bug. The second NOP is needed to keep the call dummy 8 byte aligned. */ /* Define offsets into the call dummy for the target function address */ #define FUNC_LDIL_OFFSET (INSTRUCTION_SIZE * 9) #define FUNC_LDO_OFFSET (INSTRUCTION_SIZE * 10) /* Define offsets into the call dummy for the _sr4export address */ #define SR4EXPORT_LDIL_OFFSET (INSTRUCTION_SIZE * 12) #define SR4EXPORT_LDO_OFFSET (INSTRUCTION_SIZE * 13) #define CALL_DUMMY {0x4BDA3FB9, 0x4BD93FB1, 0x4BD83FA9, 0x4BD73FA1,\ 0x37C13FB9, 0x24201004, 0x2C391005, 0x24311006,\ 0x2C291007, 0x22C00000, 0x36D60000, 0x02C010A4,\ 0x20200000, 0x34210000, 0x002010b4, 0x82842022,\ 0xe6c06000, 0x081f0242, 0x00010004, 0x00151820,\ 0xe6c00002, 0xe4202000, 0x6bdf3fd1, 0x00010004,\ 0x00151820, 0xe6c00002, 0x08000240, 0x08000240} #if !GDB_MULTI_ARCH #define CALL_DUMMY_LENGTH (INSTRUCTION_SIZE * 28) #endif #define REG_PARM_STACK_SPACE 16 #else /* defined PA_LEVEL_0 */ /* FIXME: brobecker 2002-12-26. PA_LEVEL_0 is only defined for the hppa-pro target, which should be obsoleted soon. The following section will therefore not be included in the multiarch conversion. */ /* This is the call dummy for a level 0 PA. Level 0's don't have space registers (or floating point?), so we skip all that inter-space call stuff, and avoid touching the fp regs. call_dummy ldw -36(%sp), %arg0 ldw -40(%sp), %arg1 ldw -44(%sp), %arg2 ldw -48(%sp), %arg3 ldil 0, %r31 ; FUNC_LDIL_OFFSET must point here ldo 0(%r31), %r31 ; FUNC_LDO_OFFSET must point here ble 0(%sr0, %r31) copy %r31, %r2 break 4, 8 nop ; restore_pc_queue expects these bv,n 0(%r22) ; instructions to be here... nop */ /* Define offsets into the call dummy for the target function address */ #define FUNC_LDIL_OFFSET (INSTRUCTION_SIZE * 4) #define FUNC_LDO_OFFSET (INSTRUCTION_SIZE * 5) #define CALL_DUMMY {0x4bda3fb9, 0x4bd93fb1, 0x4bd83fa9, 0x4bd73fa1,\ 0x23e00000, 0x37ff0000, 0xe7e00000, 0x081f0242,\ 0x00010004, 0x08000240, 0xeac0c002, 0x08000240} #define CALL_DUMMY_LENGTH (INSTRUCTION_SIZE * 12) #endif /* defined PA_LEVEL_0 */ #if !GDB_MULTI_ARCH #define CALL_DUMMY_START_OFFSET 0 #endif /* If we've reached a trap instruction within the call dummy, then we'll consider that to mean that we've reached the call dummy's end after its successful completion. */ #define CALL_DUMMY_HAS_COMPLETED(pc, sp, frame_address) \ (DEPRECATED_PC_IN_CALL_DUMMY((pc), (sp), (frame_address)) && \ (read_memory_integer((pc), 4) == BREAKPOINT32)) /* * Insert the specified number of args and function address * into a call sequence of the above form stored at DUMMYNAME. * * On the hppa we need to call the stack dummy through $$dyncall. * Therefore our version of FIX_CALL_DUMMY takes an extra argument, * real_pc, which is the location where gdb should start up the * inferior to do the function call. */ /* FIXME: brobecker 2002-12-26. This macro is going to cause us some problems before we can go to multiarch partial as it has been diverted on HPUX to return the value of the PC! */ #define FIX_CALL_DUMMY hppa_fix_call_dummy extern CORE_ADDR hppa_fix_call_dummy (char *, CORE_ADDR, CORE_ADDR, int, struct value **, struct type *, int); #if !GDB_MULTI_ARCH #define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \ (hppa_push_arguments((nargs), (args), (sp), (struct_return), (struct_addr))) extern CORE_ADDR hppa_push_arguments (int, struct value **, CORE_ADDR, int, CORE_ADDR); #endif #if !GDB_MULTI_ARCH extern CORE_ADDR hppa_smash_text_address (CORE_ADDR addr); #define SMASH_TEXT_ADDRESS(addr) hppa_smash_text_address (addr) #endif #define GDB_TARGET_IS_HPPA #if !GDB_MULTI_ARCH #define BELIEVE_PCC_PROMOTION 1 #endif /* * Unwind table and descriptor. */ struct unwind_table_entry { CORE_ADDR region_start; CORE_ADDR region_end; unsigned int Cannot_unwind:1; /* 0 */ unsigned int Millicode:1; /* 1 */ unsigned int Millicode_save_sr0:1; /* 2 */ unsigned int Region_description:2; /* 3..4 */ unsigned int reserved1:1; /* 5 */ unsigned int Entry_SR:1; /* 6 */ unsigned int Entry_FR:4; /* number saved *//* 7..10 */ unsigned int Entry_GR:5; /* number saved *//* 11..15 */ unsigned int Args_stored:1; /* 16 */ unsigned int Variable_Frame:1; /* 17 */ unsigned int Separate_Package_Body:1; /* 18 */ unsigned int Frame_Extension_Millicode:1; /* 19 */ unsigned int Stack_Overflow_Check:1; /* 20 */ unsigned int Two_Instruction_SP_Increment:1; /* 21 */ unsigned int Ada_Region:1; /* 22 */ unsigned int cxx_info:1; /* 23 */ unsigned int cxx_try_catch:1; /* 24 */ unsigned int sched_entry_seq:1; /* 25 */ unsigned int reserved2:1; /* 26 */ unsigned int Save_SP:1; /* 27 */ unsigned int Save_RP:1; /* 28 */ unsigned int Save_MRP_in_frame:1; /* 29 */ unsigned int extn_ptr_defined:1; /* 30 */ unsigned int Cleanup_defined:1; /* 31 */ unsigned int MPE_XL_interrupt_marker:1; /* 0 */ unsigned int HP_UX_interrupt_marker:1; /* 1 */ unsigned int Large_frame:1; /* 2 */ unsigned int Pseudo_SP_Set:1; /* 3 */ unsigned int reserved4:1; /* 4 */ unsigned int Total_frame_size:27; /* 5..31 */ /* This is *NOT* part of an actual unwind_descriptor in an object file. It is *ONLY* part of the "internalized" descriptors that we create from those in a file. */ struct { unsigned int stub_type:4; /* 0..3 */ unsigned int padding:28; /* 4..31 */ } stub_unwind; }; /* HP linkers also generate unwinds for various linker-generated stubs. GDB reads in the stubs from the $UNWIND_END$ subspace, then "converts" them into normal unwind entries using some of the reserved fields to store the stub type. */ struct stub_unwind_entry { /* The offset within the executable for the associated stub. */ unsigned stub_offset; /* The type of stub this unwind entry describes. */ char type; /* Unknown. Not needed by GDB at this time. */ char prs_info; /* Length (in instructions) of the associated stub. */ short stub_length; }; /* Sizes (in bytes) of the native unwind entries. */ #define UNWIND_ENTRY_SIZE 16 #define STUB_UNWIND_ENTRY_SIZE 8 /* The gaps represent linker stubs used in MPE and space for future expansion. */ enum unwind_stub_types { LONG_BRANCH = 1, PARAMETER_RELOCATION = 2, EXPORT = 10, IMPORT = 11, IMPORT_SHLIB = 12, }; /* We use the objfile->obj_private pointer for two things: * 1. An unwind table; * * 2. A pointer to any associated shared library object. * * #defines are used to help refer to these objects. */ /* Info about the unwind table associated with an object file. * This is hung off of the "objfile->obj_private" pointer, and * is allocated in the objfile's psymbol obstack. This allows * us to have unique unwind info for each executable and shared * library that we are debugging. */ struct obj_unwind_info { struct unwind_table_entry *table; /* Pointer to unwind info */ struct unwind_table_entry *cache; /* Pointer to last entry we found */ int last; /* Index of last entry */ }; typedef struct obj_private_struct { struct obj_unwind_info *unwind_info; /* a pointer */ struct so_list *so_info; /* a pointer */ CORE_ADDR dp; } obj_private_data_t; #if 0 extern void target_write_pc (CORE_ADDR, int); extern CORE_ADDR target_read_pc (int); extern CORE_ADDR skip_trampoline_code (CORE_ADDR, char *); #endif #if !GDB_MULTI_ARCH #define TARGET_READ_PC(pid) hppa_target_read_pc (pid) extern CORE_ADDR hppa_target_read_pc (ptid_t); #endif #if !GDB_MULTI_ARCH #define TARGET_WRITE_PC(v,pid) hppa_target_write_pc (v,pid) extern void hppa_target_write_pc (CORE_ADDR, ptid_t); #endif #if !GDB_MULTI_ARCH #define TARGET_READ_FP() hppa_target_read_fp () extern CORE_ADDR hppa_target_read_fp (void); #endif /* For a number of horrible reasons we may have to adjust the location of variables on the stack. Ugh. */ #define HPREAD_ADJUST_STACK_ADDRESS(ADDR) hpread_adjust_stack_address(ADDR) extern int hpread_adjust_stack_address (CORE_ADDR); /* Here's how to step off a permanent breakpoint. */ #define SKIP_PERMANENT_BREAKPOINT (hppa_skip_permanent_breakpoint) extern void hppa_skip_permanent_breakpoint (void); /* On HP-UX, certain system routines (millicode) have names beginning with $ or $$, e.g. $$dyncall, which handles inter-space procedure calls on PA-RISC. Tell the expression parser to check for those when parsing tokens that begin with "$". */ #define SYMBOLS_CAN_START_WITH_DOLLAR (1)