/* Parameters for execution on any Hewlett-Packard PA-RISC machine. Copyright 1986, 1987, 1989, 1990, 1991, 1992, 1993, 1995 Free Software Foundation, Inc. Contributed by the Center for Software Science at the University of Utah (pa-gdb-bugs@cs.utah.edu). This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* Forward declarations of some types we use in prototypes */ #ifdef __STDC__ struct frame_info; struct frame_saved_regs; struct value; struct type; struct inferior_status; #endif /* Target system byte order. */ #define TARGET_BYTE_ORDER BIG_ENDIAN /* By default assume we don't have to worry about software floating point. */ #ifndef SOFT_FLOAT #define SOFT_FLOAT 0 #endif /* Get at various relevent fields of an instruction word. */ #define MASK_5 0x1f #define MASK_11 0x7ff #define MASK_14 0x3fff #define MASK_21 0x1fffff /* This macro gets bit fields using HP's numbering (MSB = 0) */ #define GET_FIELD(X, FROM, TO) \ ((X) >> (31 - (TO)) & ((1 << ((TO) - (FROM) + 1)) - 1)) /* Watch out for NaNs */ #define IEEE_FLOAT /* On the PA, any pass-by-value structure > 8 bytes is actually passed via a pointer regardless of its type or the compiler used. */ #define REG_STRUCT_HAS_ADDR(gcc_p,type) \ (TYPE_LENGTH (type) > 8) #define USE_STRUCT_CONVENTION(gcc_p,type) (TYPE_LENGTH (type) > 8) /* Offset from address of function to start of its code. Zero on most machines. */ #define FUNCTION_START_OFFSET 0 /* Advance PC across any function entry prologue instructions to reach some "real" code. */ #define SKIP_PROLOGUE(pc) pc = skip_prologue (pc) extern CORE_ADDR skip_prologue PARAMS ((CORE_ADDR)); /* If PC is in some function-call trampoline code, return the PC where the function itself actually starts. If not, return NULL. */ #define SKIP_TRAMPOLINE_CODE(pc) skip_trampoline_code (pc, NULL) /* Return non-zero if we are in an appropriate trampoline. */ #define IN_SOLIB_CALL_TRAMPOLINE(pc, name) \ in_solib_call_trampoline (pc, name) extern int in_solib_call_trampoline PARAMS ((CORE_ADDR, char *)); #define IN_SOLIB_RETURN_TRAMPOLINE(pc, name) \ in_solib_return_trampoline (pc, name) extern int in_solib_return_trampoline PARAMS ((CORE_ADDR, char *)); /* Immediately after a function call, return the saved pc. Can't go through the frames for this because on some machines the new frame is not set up until the new function executes some instructions. */ #undef SAVED_PC_AFTER_CALL #define SAVED_PC_AFTER_CALL(frame) saved_pc_after_call (frame) extern CORE_ADDR saved_pc_after_call PARAMS ((struct frame_info *)); /* Stack grows upward */ #define INNER_THAN > /* Sequence of bytes for breakpoint instruction. */ #define BREAKPOINT {0x00, 0x01, 0x00, 0x04} /* Amount PC must be decremented by after a breakpoint. This is often the number of bytes in BREAKPOINT but not always. Not on the PA-RISC */ #define DECR_PC_AFTER_BREAK 0 /* return instruction is bv r0(rp) or bv,n r0(rp)*/ #define ABOUT_TO_RETURN(pc) ((read_memory_integer (pc, 4) | 0x2) == 0xE840C002) /* Say how long (ordinary) registers are. This is a piece of bogosity used in push_word and a few other places; REGISTER_RAW_SIZE is the real way to know how big a register is. */ #define REGISTER_SIZE 4 /* Number of machine registers */ #define NUM_REGS 128 /* Initializer for an array of names of registers. There should be NUM_REGS strings in this initializer. */ #define REGISTER_NAMES \ {"flags", "r1", "rp", "r3", "r4", "r5", "r6", "r7", "r8", "r9", \ "r10", "r11", "r12", "r13", "r14", "r15", "r16", "r17", "r18", "r19", \ "r20", "r21", "r22", "r23", "r24", "r25", "r26", "dp", "ret0", "ret1", \ "sp", "r31", "sar", "pcoqh", "pcsqh", "pcoqt", "pcsqt", \ "eiem", "iir", "isr", "ior", "ipsw", "goto", "sr4", "sr0", "sr1", "sr2", \ "sr3", "sr5", "sr6", "sr7", "cr0", "cr8", "cr9", "ccr", "cr12", "cr13", \ "cr24", "cr25", "cr26", "mpsfu_high", "mpsfu_low", "mpsfu_ovflo", "pad", \ "fpsr", "fpe1", "fpe2", "fpe3", "fpe4", "fpe5", "fpe6", "fpe7", \ "fr4", "fr4R", "fr5", "fr5R", "fr6", "fr6R", "fr7", "fr7R", \ "fr8", "fr8R", "fr9", "fr9R", "fr10", "fr10R", "fr11", "fr11R", \ "fr12", "fr12R", "fr13", "fr13R", "fr14", "fr14R", "fr15", "fr15R", \ "fr16", "fr16R", "fr17", "fr17R", "fr18", "fr18R", "fr19", "fr19R", \ "fr20", "fr20R", "fr21", "fr21R", "fr22", "fr22R", "fr23", "fr23R", \ "fr24", "fr24R", "fr25", "fr25R", "fr26", "fr26R", "fr27", "fr27R", \ "fr28", "fr28R", "fr29", "fr29R", "fr30", "fr30R", "fr31", "fr31R"} /* Register numbers of various important registers. Note that some of these values are "real" register numbers, and correspond to the general registers of the machine, and some are "phony" register numbers which are too large to be actual register numbers as far as the user is concerned but do serve to get the desired values when passed to read_register. */ #define R0_REGNUM 0 /* Doesn't actually exist, used as base for other r registers. */ #define FLAGS_REGNUM 0 /* Various status flags */ #define RP_REGNUM 2 /* return pointer */ #define FP_REGNUM 3 /* Contains address of executing stack */ /* frame */ #define SP_REGNUM 30 /* Contains address of top of stack */ #define SAR_REGNUM 32 /* Shift Amount Register */ #define IPSW_REGNUM 41 /* Interrupt Processor Status Word */ #define PCOQ_HEAD_REGNUM 33 /* instruction offset queue head */ #define PCSQ_HEAD_REGNUM 34 /* instruction space queue head */ #define PCOQ_TAIL_REGNUM 35 /* instruction offset queue tail */ #define PCSQ_TAIL_REGNUM 36 /* instruction space queue tail */ #define EIEM_REGNUM 37 /* External Interrupt Enable Mask */ #define IIR_REGNUM 38 /* Interrupt Instruction Register */ #define IOR_REGNUM 40 /* Interrupt Offset Register */ #define SR4_REGNUM 43 /* space register 4 */ #define RCR_REGNUM 51 /* Recover Counter (also known as cr0) */ #define CCR_REGNUM 54 /* Coprocessor Configuration Register */ #define TR0_REGNUM 57 /* Temporary Registers (cr24 -> cr31) */ #define FP0_REGNUM 64 /* floating point reg. 0 */ #define FP4_REGNUM 72 /* compatibility with the rest of gdb. */ #define PC_REGNUM PCOQ_HEAD_REGNUM #define NPC_REGNUM PCOQ_TAIL_REGNUM /* * Processor Status Word Masks */ #define PSW_T 0x01000000 /* Taken Branch Trap Enable */ #define PSW_H 0x00800000 /* Higher-Privilege Transfer Trap Enable */ #define PSW_L 0x00400000 /* Lower-Privilege Transfer Trap Enable */ #define PSW_N 0x00200000 /* PC Queue Front Instruction Nullified */ #define PSW_X 0x00100000 /* Data Memory Break Disable */ #define PSW_B 0x00080000 /* Taken Branch in Previous Cycle */ #define PSW_C 0x00040000 /* Code Address Translation Enable */ #define PSW_V 0x00020000 /* Divide Step Correction */ #define PSW_M 0x00010000 /* High-Priority Machine Check Disable */ #define PSW_CB 0x0000ff00 /* Carry/Borrow Bits */ #define PSW_R 0x00000010 /* Recovery Counter Enable */ #define PSW_Q 0x00000008 /* Interruption State Collection Enable */ #define PSW_P 0x00000004 /* Protection ID Validation Enable */ #define PSW_D 0x00000002 /* Data Address Translation Enable */ #define PSW_I 0x00000001 /* External, Power Failure, Low-Priority */ /* Machine Check Interruption Enable */ /* When fetching register values from an inferior or a core file, clean them up using this macro. BUF is a char pointer to the raw value of the register in the registers[] array. */ #define CLEAN_UP_REGISTER_VALUE(regno, buf) \ do { \ if ((regno) == PCOQ_HEAD_REGNUM || (regno) == PCOQ_TAIL_REGNUM) \ (buf)[3] &= ~0x3; \ } while (0) /* Define DO_REGISTERS_INFO() to do machine-specific formatting of register dumps. */ #define DO_REGISTERS_INFO(_regnum, fp) pa_do_registers_info (_regnum, fp) extern void pa_do_registers_info PARAMS ((int, int)); /* PA specific macro to see if the current instruction is nullified. */ #ifndef INSTRUCTION_NULLIFIED #define INSTRUCTION_NULLIFIED ((int)read_register (IPSW_REGNUM) & 0x00200000) #endif /* Number of bytes of storage in the actual machine representation for register N. On the PA-RISC, all regs are 4 bytes, including the FP registers (they're accessed as two 4 byte halves). */ #define REGISTER_RAW_SIZE(N) 4 /* Total amount of space needed to store our copies of the machine's register state, the array `registers'. */ #define REGISTER_BYTES (NUM_REGS * 4) /* Index within `registers' of the first byte of the space for register N. */ #define REGISTER_BYTE(N) (N) * 4 /* Number of bytes of storage in the program's representation for register N. */ #define REGISTER_VIRTUAL_SIZE(N) REGISTER_RAW_SIZE(N) /* Largest value REGISTER_RAW_SIZE can have. */ #define MAX_REGISTER_RAW_SIZE 4 /* Largest value REGISTER_VIRTUAL_SIZE can have. */ #define MAX_REGISTER_VIRTUAL_SIZE 8 /* Return the GDB type object for the "standard" data type of data in register N. */ #define REGISTER_VIRTUAL_TYPE(N) \ ((N) < FP4_REGNUM ? builtin_type_int : builtin_type_float) /* Store the address of the place in which to copy the structure the subroutine will return. This is called from call_function. */ #define STORE_STRUCT_RETURN(ADDR, SP) {write_register (28, (ADDR)); } /* Extract from an array REGBUF containing the (raw) register state a function return value of type TYPE, and copy that, in virtual format, into VALBUF. FIXME: Not sure what to do for soft float here. */ #define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ { \ if (TYPE_CODE (TYPE) == TYPE_CODE_FLT && !SOFT_FLOAT) \ memcpy ((VALBUF), \ ((char *)(REGBUF)) + REGISTER_BYTE (FP4_REGNUM), \ TYPE_LENGTH (TYPE)); \ else \ memcpy ((VALBUF), \ (char *)(REGBUF) + REGISTER_BYTE (28) + \ ((TYPE_LENGTH (TYPE) > 4 ? 8 : 4) - TYPE_LENGTH (TYPE)), \ TYPE_LENGTH (TYPE)); \ } /* Write into appropriate registers a function return value of type TYPE, given in virtual format. For software floating point the return value goes into the integer registers. But we don't have any flag to key this on, so we always store the value into the integer registers, and if it's a float value, then we put it in the float registers too. */ #define STORE_RETURN_VALUE(TYPE,VALBUF) \ write_register_bytes (REGISTER_BYTE (28),(VALBUF), TYPE_LENGTH (TYPE)) ; \ if (!SOFT_FLOAT) \ write_register_bytes ((TYPE_CODE(TYPE) == TYPE_CODE_FLT \ ? REGISTER_BYTE (FP4_REGNUM) \ : REGISTER_BYTE (28)), \ (VALBUF), TYPE_LENGTH (TYPE)) /* Extract from an array REGBUF containing the (raw) register state the address in which a function should return its structure value, as a CORE_ADDR (or an expression that can be used as one). */ #define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \ (*(int *)((REGBUF) + REGISTER_BYTE (28))) /* * This macro defines the register numbers (from REGISTER_NAMES) that * are effectively unavailable to the user through ptrace(). It allows * us to include the whole register set in REGISTER_NAMES (inorder to * better support remote debugging). If it is used in * fetch/store_inferior_registers() gdb will not complain about I/O errors * on fetching these registers. If all registers in REGISTER_NAMES * are available, then return false (0). */ #define CANNOT_STORE_REGISTER(regno) \ ((regno) == 0) || \ ((regno) == PCSQ_HEAD_REGNUM) || \ ((regno) >= PCSQ_TAIL_REGNUM && (regno) < IPSW_REGNUM) || \ ((regno) > IPSW_REGNUM && (regno) < FP4_REGNUM) #define INIT_EXTRA_FRAME_INFO(fromleaf, frame) init_extra_frame_info (fromleaf, frame) extern void init_extra_frame_info PARAMS ((int, struct frame_info *)); /* Describe the pointer in each stack frame to the previous stack frame (its caller). */ /* FRAME_CHAIN takes a frame's nominal address and produces the frame's chain-pointer. FRAME_CHAIN_COMBINE takes the chain pointer and the frame's nominal address and produces the nominal address of the caller frame. However, if FRAME_CHAIN_VALID returns zero, it means the given frame is the outermost one and has no caller. In that case, FRAME_CHAIN_COMBINE is not used. */ /* In the case of the PA-RISC, the frame's nominal address is the address of a 4-byte word containing the calling frame's address (previous FP). */ #define FRAME_CHAIN(thisframe) frame_chain (thisframe) extern CORE_ADDR frame_chain PARAMS ((struct frame_info *)); #define FRAME_CHAIN_VALID(chain, thisframe) \ frame_chain_valid (chain, thisframe) extern int frame_chain_valid PARAMS ((CORE_ADDR, struct frame_info *)); #define FRAME_CHAIN_COMBINE(chain, thisframe) (chain) /* Define other aspects of the stack frame. */ /* A macro that tells us whether the function invocation represented by FI does not have a frame on the stack associated with it. If it does not, FRAMELESS is set to 1, else 0. */ #define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \ (FRAMELESS) = frameless_function_invocation(FI) extern int frameless_function_invocation PARAMS ((struct frame_info *)); #define FRAME_SAVED_PC(FRAME) frame_saved_pc (FRAME) #define FRAME_ARGS_ADDRESS(fi) ((fi)->frame) #define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame) /* Set VAL to the number of args passed to frame described by FI. Can set VAL to -1, meaning no way to tell. */ /* We can't tell how many args there are now that the C compiler delays popping them. */ #define FRAME_NUM_ARGS(val,fi) (val = -1) /* Return number of bytes at start of arglist that are not really args. */ #define FRAME_ARGS_SKIP 0 #define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \ hppa_frame_find_saved_regs (frame_info, &frame_saved_regs) extern void hppa_frame_find_saved_regs PARAMS ((struct frame_info *, struct frame_saved_regs *)); /* Things needed for making the inferior call functions. */ /* Push an empty stack frame, to record the current PC, etc. */ #define PUSH_DUMMY_FRAME push_dummy_frame (&inf_status) extern void push_dummy_frame PARAMS ((struct inferior_status *)); /* Discard from the stack the innermost frame, restoring all saved registers. */ #define POP_FRAME hppa_pop_frame () extern void hppa_pop_frame PARAMS ((void)); #define INSTRUCTION_SIZE 4 #ifndef PA_LEVEL_0 /* Non-level zero PA's have space registers (but they don't always have floating-point, do they???? */ /* This sequence of words is the instructions ; Call stack frame has already been built by gdb. Since we could be calling ; a varargs function, and we do not have the benefit of a stub to put things in ; the right place, we load the first 4 word of arguments into both the general ; and fp registers. call_dummy ldw -36(sp), arg0 ldw -40(sp), arg1 ldw -44(sp), arg2 ldw -48(sp), arg3 ldo -36(sp), r1 fldws 0(0, r1), fr4 fldds -4(0, r1), fr5 fldws -8(0, r1), fr6 fldds -12(0, r1), fr7 ldil 0, r22 ; FUNC_LDIL_OFFSET must point here ldo 0(r22), r22 ; FUNC_LDO_OFFSET must point here ldsid (0,r22), r4 ldil 0, r1 ; SR4EXPORT_LDIL_OFFSET must point here ldo 0(r1), r1 ; SR4EXPORT_LDO_OFFSET must point here ldsid (0,r1), r20 combt,=,n r4, r20, text_space ; If target is in data space, do a ble 0(sr5, r22) ; "normal" procedure call copy r31, r2 break 4, 8 mtsp r21, sr0 ble,n 0(sr0, r22) text_space ; Otherwise, go through _sr4export, ble (sr4, r1) ; which will return back here. stw r31,-24(r30) break 4, 8 mtsp r21, sr0 ble,n 0(sr0, r22) nop ; To avoid kernel bugs nop ; and keep the dummy 8 byte aligned The dummy decides if the target is in text space or data space. If it's in data space, there's no problem because the target can return back to the dummy. However, if the target is in text space, the dummy calls the secret, undocumented routine _sr4export, which calls a function in text space and can return to any space. Instead of including fake instructions to represent saved registers, we know that the frame is associated with the call dummy and treat it specially. The trailing NOPs are needed to avoid a bug in HPUX, BSD and OSF1 kernels. If the memory at the location pointed to by the PC is 0xffffffff then a ptrace step call will fail (even if the instruction is nullified). The code to pop a dummy frame single steps three instructions starting with the last mtsp. This includes the nullified "instruction" following the ble (which is uninitialized junk). If the "instruction" following the last BLE is 0xffffffff, then the ptrace will fail and the dummy frame is not correctly popped. By placing a NOP in the delay slot of the BLE instruction we can be sure that we never try to execute a 0xffffffff instruction and avoid the kernel bug. The second NOP is needed to keep the call dummy 8 byte aligned. */ /* Define offsets into the call dummy for the target function address */ #define FUNC_LDIL_OFFSET (INSTRUCTION_SIZE * 9) #define FUNC_LDO_OFFSET (INSTRUCTION_SIZE * 10) /* Define offsets into the call dummy for the _sr4export address */ #define SR4EXPORT_LDIL_OFFSET (INSTRUCTION_SIZE * 12) #define SR4EXPORT_LDO_OFFSET (INSTRUCTION_SIZE * 13) #define CALL_DUMMY {0x4BDA3FB9, 0x4BD93FB1, 0x4BD83FA9, 0x4BD73FA1,\ 0x37C13FB9, 0x24201004, 0x2C391005, 0x24311006,\ 0x2C291007, 0x22C00000, 0x36D60000, 0x02C010A4,\ 0x20200000, 0x34210000, 0x002010b4, 0x82842022,\ 0xe6c06000, 0x081f0242, 0x00010004, 0x00151820,\ 0xe6c00002, 0xe4202000, 0x6bdf3fd1, 0x00010004,\ 0x00151820, 0xe6c00002, 0x08000240, 0x08000240} #define CALL_DUMMY_LENGTH (INSTRUCTION_SIZE * 28) #else /* defined PA_LEVEL_0 */ /* This is the call dummy for a level 0 PA. Level 0's don't have space registers (or floating point??), so we skip all that inter-space call stuff, and avoid touching the fp regs. call_dummy ldw -36(%sp), %arg0 ldw -40(%sp), %arg1 ldw -44(%sp), %arg2 ldw -48(%sp), %arg3 ldil 0, %r31 ; FUNC_LDIL_OFFSET must point here ldo 0(%r31), %r31 ; FUNC_LDO_OFFSET must point here ble 0(%sr0, %r31) copy %r31, %r2 break 4, 8 nop ; restore_pc_queue expects these bv,n 0(%r22) ; instructions to be here... nop */ /* Define offsets into the call dummy for the target function address */ #define FUNC_LDIL_OFFSET (INSTRUCTION_SIZE * 4) #define FUNC_LDO_OFFSET (INSTRUCTION_SIZE * 5) #define CALL_DUMMY {0x4bda3fb9, 0x4bd93fb1, 0x4bd83fa9, 0x4bd73fa1,\ 0x23e00000, 0x37ff0000, 0xe7e00000, 0x081f0242,\ 0x00010004, 0x08000240, 0xeac0c002, 0x08000240} #define CALL_DUMMY_LENGTH (INSTRUCTION_SIZE * 12) #endif #define CALL_DUMMY_START_OFFSET 0 /* * Insert the specified number of args and function address * into a call sequence of the above form stored at DUMMYNAME. * * On the hppa we need to call the stack dummy through $$dyncall. * Therefore our version of FIX_CALL_DUMMY takes an extra argument, * real_pc, which is the location where gdb should start up the * inferior to do the function call. */ #define FIX_CALL_DUMMY hppa_fix_call_dummy extern CORE_ADDR hppa_fix_call_dummy PARAMS ((char *, CORE_ADDR, CORE_ADDR, int, struct value **, struct type *, int)); #define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \ sp = hppa_push_arguments(nargs, args, sp, struct_return, struct_addr) extern CORE_ADDR hppa_push_arguments PARAMS ((int, struct value **, CORE_ADDR, int, CORE_ADDR)); /* The low two bits of the PC on the PA contain the privilege level. Some genius implementing a (non-GCC) compiler apparently decided this means that "addresses" in a text section therefore include a privilege level, and thus symbol tables should contain these bits. This seems like a bonehead thing to do--anyway, it seems to work for our purposes to just ignore those bits. */ #define SMASH_TEXT_ADDRESS(addr) ((addr) &= ~0x3) #define GDB_TARGET_IS_HPPA #define BELIEVE_PCC_PROMOTION 1 /* * Unwind table and descriptor. */ struct unwind_table_entry { unsigned int region_start; unsigned int region_end; unsigned int Cannot_unwind : 1; unsigned int Millicode : 1; unsigned int Millicode_save_sr0 : 1; unsigned int Region_description : 2; unsigned int reserved1 : 1; unsigned int Entry_SR : 1; unsigned int Entry_FR : 4; /* number saved */ unsigned int Entry_GR : 5; /* number saved */ unsigned int Args_stored : 1; unsigned int Variable_Frame : 1; unsigned int Separate_Package_Body : 1; unsigned int Frame_Extension_Millicode:1; unsigned int Stack_Overflow_Check : 1; unsigned int Two_Instruction_SP_Increment:1; unsigned int Ada_Region : 1; /* Use this field to store a stub unwind type. */ #define stub_type reserved2 unsigned int reserved2 : 4; unsigned int Save_SP : 1; unsigned int Save_RP : 1; unsigned int Save_MRP_in_frame : 1; unsigned int extn_ptr_defined : 1; unsigned int Cleanup_defined : 1; unsigned int MPE_XL_interrupt_marker: 1; unsigned int HP_UX_interrupt_marker: 1; unsigned int Large_frame : 1; unsigned int reserved4 : 2; unsigned int Total_frame_size : 27; }; /* HP linkers also generate unwinds for various linker-generated stubs. GDB reads in the stubs from the $UNWIND_END$ subspace, then "converts" them into normal unwind entries using some of the reserved fields to store the stub type. */ struct stub_unwind_entry { /* The offset within the executable for the associated stub. */ unsigned stub_offset; /* The type of stub this unwind entry describes. */ char type; /* Unknown. Not needed by GDB at this time. */ char prs_info; /* Length (in instructions) of the associated stub. */ short stub_length; }; /* Sizes (in bytes) of the native unwind entries. */ #define UNWIND_ENTRY_SIZE 16 #define STUB_UNWIND_ENTRY_SIZE 8 /* The gaps represent linker stubs used in MPE and space for future expansion. */ enum unwind_stub_types { LONG_BRANCH = 1, PARAMETER_RELOCATION = 2, EXPORT = 10, IMPORT = 11, }; /* Info about the unwind table associated with an object file. This is hung off of the objfile->obj_private pointer, and is allocated in the objfile's psymbol obstack. This allows us to have unique unwind info for each executable and shared library that we are debugging. */ struct obj_unwind_info { struct unwind_table_entry *table; /* Pointer to unwind info */ struct unwind_table_entry *cache; /* Pointer to last entry we found */ int last; /* Index of last entry */ }; #define OBJ_UNWIND_INFO(obj) ((struct obj_unwind_info *)obj->obj_private) extern CORE_ADDR target_read_pc PARAMS ((int)); extern void target_write_pc PARAMS ((CORE_ADDR, int)); extern CORE_ADDR skip_trampoline_code PARAMS ((CORE_ADDR, char *)); #define TARGET_READ_PC(pid) target_read_pc (pid) #define TARGET_WRITE_PC(v,pid) target_write_pc (v,pid) /* For a number of horrible reasons we may have to adjust the location of variables on the stack. Ugh. */ #define HPREAD_ADJUST_STACK_ADDRESS(ADDR) hpread_adjust_stack_address(ADDR) extern int hpread_adjust_stack_address PARAMS ((CORE_ADDR)); /* If the current gcc for for this target does not produce correct debugging information for float parameters, both prototyped and unprototyped, then define this macro. This forces gdb to always assume that floats are passed as doubles and then converted in the callee. For the pa, it appears that the debug info marks the parameters as floats regardless of whether the function is prototyped, but the actual values are passed as doubles for the non-prototyped case and floats for the prototyped case. Thus we choose to make the non-prototyped case work for C and break the prototyped case, since the non-prototyped case is probably much more common. (FIXME). */ #define COERCE_FLOAT_TO_DOUBLE (current_language -> la_language == language_c) #define STACK_ALIGN(ADDR) (((ADDR) + 7) & -8)