/* Data structures associated with breakpoints in GDB. Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2007, 2008, 2009 Free Software Foundation, Inc. This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #if !defined (BREAKPOINT_H) #define BREAKPOINT_H 1 #include "frame.h" #include "value.h" #include "vec.h" struct value; struct block; /* This is the maximum number of bytes a breakpoint instruction can take. Feel free to increase it. It's just used in a few places to size arrays that should be independent of the target architecture. */ #define BREAKPOINT_MAX 16 /* Type of breakpoint. */ /* FIXME In the future, we should fold all other breakpoint-like things into here. This includes: * single-step (for machines where we have to simulate single stepping) (probably, though perhaps it is better for it to look as much as possible like a single-step to wait_for_inferior). */ enum bptype { bp_none = 0, /* Eventpoint has been deleted. */ bp_breakpoint, /* Normal breakpoint */ bp_hardware_breakpoint, /* Hardware assisted breakpoint */ bp_until, /* used by until command */ bp_finish, /* used by finish command */ bp_watchpoint, /* Watchpoint */ bp_hardware_watchpoint, /* Hardware assisted watchpoint */ bp_read_watchpoint, /* read watchpoint, (hardware assisted) */ bp_access_watchpoint, /* access watchpoint, (hardware assisted) */ bp_longjmp, /* secret breakpoint to find longjmp() */ bp_longjmp_resume, /* secret breakpoint to escape longjmp() */ /* Used by wait_for_inferior for stepping over subroutine calls, for stepping over signal handlers, and for skipping prologues. */ bp_step_resume, /* Used to detect when a watchpoint expression has gone out of scope. These breakpoints are usually not visible to the user. This breakpoint has some interesting properties: 1) There's always a 1:1 mapping between watchpoints on local variables and watchpoint_scope breakpoints. 2) It automatically deletes itself and the watchpoint it's associated with when hit. 3) It can never be disabled. */ bp_watchpoint_scope, /* The breakpoint at the end of a call dummy. */ /* FIXME: What if the function we are calling longjmp()s out of the call, or the user gets out with the "return" command? We currently have no way of cleaning up the breakpoint in these (obscure) situations. (Probably can solve this by noticing longjmp, "return", etc., it's similar to noticing when a watchpoint on a local variable goes out of scope (with hardware support for watchpoints)). */ bp_call_dummy, /* Some dynamic linkers (HP, maybe Solaris) can arrange for special code in the inferior to run when significant events occur in the dynamic linker (for example a library is loaded or unloaded). By placing a breakpoint in this magic code GDB will get control when these significant events occur. GDB can then re-examine the dynamic linker's data structures to discover any newly loaded dynamic libraries. */ bp_shlib_event, /* Some multi-threaded systems can arrange for a location in the inferior to be executed when certain thread-related events occur (such as thread creation or thread death). By placing a breakpoint at one of these locations, GDB will get control when these events occur. GDB can then update its thread lists etc. */ bp_thread_event, /* On the same principal, an overlay manager can arrange to call a magic location in the inferior whenever there is an interesting change in overlay status. GDB can update its overlay tables and fiddle with breakpoints in overlays when this breakpoint is hit. */ bp_overlay_event, bp_catchpoint, bp_tracepoint, }; /* States of enablement of breakpoint. */ enum enable_state { bp_disabled, /* The eventpoint is inactive, and cannot trigger. */ bp_enabled, /* The eventpoint is active, and can trigger. */ bp_call_disabled, /* The eventpoint has been disabled while a call into the inferior is "in flight", because some eventpoints interfere with the implementation of a call on some targets. The eventpoint will be automatically enabled and reset when the call "lands" (either completes, or stops at another eventpoint). */ bp_permanent /* There is a breakpoint instruction hard-wired into the target's code. Don't try to write another breakpoint instruction on top of it, or restore its value. Step over it using the architecture's SKIP_INSN macro. */ }; /* Disposition of breakpoint. Ie: what to do after hitting it. */ enum bpdisp { disp_del, /* Delete it */ disp_del_at_next_stop, /* Delete at next stop, whether hit or not */ disp_disable, /* Disable it */ disp_donttouch /* Leave it alone */ }; enum target_hw_bp_type { hw_write = 0, /* Common HW watchpoint */ hw_read = 1, /* Read HW watchpoint */ hw_access = 2, /* Access HW watchpoint */ hw_execute = 3 /* Execute HW breakpoint */ }; /* Information used by targets to insert and remove breakpoints. */ struct bp_target_info { /* Address at which the breakpoint was placed. This is normally the same as ADDRESS from the bp_location, except when adjustment happens in gdbarch_breakpoint_from_pc. The most common form of adjustment is stripping an alternate ISA marker from the PC which is used to determine the type of breakpoint to insert. */ CORE_ADDR placed_address; /* If the breakpoint lives in memory and reading that memory would give back the breakpoint, instead of the original contents, then the original contents are cached here. Only SHADOW_LEN bytes of this buffer are valid, and only when the breakpoint is inserted. */ gdb_byte shadow_contents[BREAKPOINT_MAX]; /* The length of the data cached in SHADOW_CONTENTS. */ int shadow_len; /* The size of the placed breakpoint, according to gdbarch_breakpoint_from_pc, when the breakpoint was inserted. This is generally the same as SHADOW_LEN, unless we did not need to read from the target to implement the memory breakpoint (e.g. if a remote stub handled the details). We may still need the size to remove the breakpoint safely. */ int placed_size; }; /* GDB maintains two types of information about each breakpoint (or watchpoint, or other related event). The first type corresponds to struct breakpoint; this is a relatively high-level structure which contains the source location(s), stopping conditions, user commands to execute when the breakpoint is hit, and so forth. The second type of information corresponds to struct bp_location. Each breakpoint has one or (eventually) more locations associated with it, which represent target-specific and machine-specific mechanisms for stopping the program. For instance, a watchpoint expression may require multiple hardware watchpoints in order to catch all changes in the value of the expression being watched. */ enum bp_loc_type { bp_loc_software_breakpoint, bp_loc_hardware_breakpoint, bp_loc_hardware_watchpoint, bp_loc_other /* Miscellaneous... */ }; struct bp_location { /* Chain pointer to the next breakpoint location for the same parent breakpoint. */ struct bp_location *next; /* Pointer to the next breakpoint location, in a global list of all breakpoint locations. */ struct bp_location *global_next; /* Type of this breakpoint location. */ enum bp_loc_type loc_type; /* Each breakpoint location must belong to exactly one higher-level breakpoint. This and the DUPLICATE flag are more straightforward than reference counting. */ struct breakpoint *owner; /* Conditional. Break only if this expression's value is nonzero. Unlike string form of condition, which is associated with breakpoint, this is associated with location, since if breakpoint has several locations, the evaluation of expression can be different for different locations. */ struct expression *cond; /* This location's address is in an unloaded solib, and so this location should not be inserted. It will be automatically enabled when that solib is loaded. */ char shlib_disabled; /* Is this particular location enabled. */ char enabled; /* Nonzero if this breakpoint is now inserted. */ char inserted; /* Nonzero if this is not the first breakpoint in the list for the given address. */ char duplicate; /* If we someday support real thread-specific breakpoints, then the breakpoint location will need a thread identifier. */ /* Data for specific breakpoint types. These could be a union, but simplicity is more important than memory usage for breakpoints. */ /* Note that zero is a perfectly valid code address on some platforms (for example, the mn10200 (OBSOLETE) and mn10300 simulators). NULL is not a special value for this field. Valid for all types except bp_loc_other. */ CORE_ADDR address; /* For hardware watchpoints, the size of data ad ADDRESS being watches. */ int length; /* Type of hardware watchpoint. */ enum target_hw_bp_type watchpoint_type; /* For any breakpoint type with an address, this is the section associated with the address. Used primarily for overlay debugging. */ struct obj_section *section; /* Address at which breakpoint was requested, either by the user or by GDB for internal breakpoints. This will usually be the same as ``address'' (above) except for cases in which ADJUST_BREAKPOINT_ADDRESS has computed a different address at which to place the breakpoint in order to comply with a processor's architectual constraints. */ CORE_ADDR requested_address; char *function_name; /* Details of the placed breakpoint, when inserted. */ struct bp_target_info target_info; /* Similarly, for the breakpoint at an overlay's LMA, if necessary. */ struct bp_target_info overlay_target_info; /* In a non-stop mode, it's possible that we delete a breakpoint, but as we do that, some still running thread hits that breakpoint. For that reason, we need to keep locations belonging to deleted breakpoints for a bit, so that don't report unexpected SIGTRAP. We can't keep such locations forever, so we use a heuristic -- after we process certain number of inferior events since breakpoint was deleted, we retire all locations of that breakpoint. This variable keeps a number of events still to go, when it becomes 0 this location is retired. */ int events_till_retirement; }; /* This structure is a collection of function pointers that, if available, will be called instead of the performing the default action for this bptype. */ struct breakpoint_ops { /* Insert the breakpoint or activate the catchpoint. Should raise an exception if the operation failed. */ void (*insert) (struct breakpoint *); /* Remove the breakpoint/catchpoint that was previously inserted with the "insert" method above. Return non-zero if the operation succeeded. */ int (*remove) (struct breakpoint *); /* Return non-zero if the debugger should tell the user that this breakpoint was hit. */ int (*breakpoint_hit) (struct breakpoint *); /* The normal print routine for this breakpoint, called when we hit it. */ enum print_stop_action (*print_it) (struct breakpoint *); /* Display information about this breakpoint, for "info breakpoints". */ void (*print_one) (struct breakpoint *, CORE_ADDR *); /* Display information about this breakpoint after setting it (roughly speaking; this is called from "mention"). */ void (*print_mention) (struct breakpoint *); }; enum watchpoint_triggered { /* This watchpoint definitely did not trigger. */ watch_triggered_no = 0, /* Some hardware watchpoint triggered, and it might have been this one, but we do not know which it was. */ watch_triggered_unknown, /* This hardware watchpoint definitely did trigger. */ watch_triggered_yes }; typedef struct bp_location *bp_location_p; DEF_VEC_P(bp_location_p); /* Note that the ->silent field is not currently used by any commands (though the code is in there if it was to be, and set_raw_breakpoint does set it to 0). I implemented it because I thought it would be useful for a hack I had to put in; I'm going to leave it in because I can see how there might be times when it would indeed be useful */ /* This is for a breakpoint or a watchpoint. */ struct breakpoint { struct breakpoint *next; /* Type of breakpoint. */ enum bptype type; /* Zero means disabled; remember the info but don't break here. */ enum enable_state enable_state; /* What to do with this breakpoint after we hit it. */ enum bpdisp disposition; /* Number assigned to distinguish breakpoints. */ int number; /* Location(s) associated with this high-level breakpoint. */ struct bp_location *loc; /* Line number of this address. */ int line_number; /* Source file name of this address. */ char *source_file; /* Non-zero means a silent breakpoint (don't print frame info if we stop here). */ unsigned char silent; /* Number of stops at this breakpoint that should be continued automatically before really stopping. */ int ignore_count; /* Chain of command lines to execute when this breakpoint is hit. */ struct command_line *commands; /* Stack depth (address of frame). If nonzero, break only if fp equals this. */ struct frame_id frame_id; /* String we used to set the breakpoint (malloc'd). */ char *addr_string; /* Language we used to set the breakpoint. */ enum language language; /* Input radix we used to set the breakpoint. */ int input_radix; /* String form of the breakpoint condition (malloc'd), or NULL if there is no condition. */ char *cond_string; /* String form of exp (malloc'd), or NULL if none. */ char *exp_string; /* The expression we are watching, or NULL if not a watchpoint. */ struct expression *exp; /* The largest block within which it is valid, or NULL if it is valid anywhere (e.g. consists just of global symbols). */ struct block *exp_valid_block; /* Value of the watchpoint the last time we checked it, or NULL when we do not know the value yet or the value was not readable. VAL is never lazy. */ struct value *val; /* Nonzero if VAL is valid. If VAL_VALID is set but VAL is NULL, then an error occurred reading the value. */ int val_valid; /* Holds the address of the related watchpoint_scope breakpoint when using watchpoints on local variables (might the concept of a related breakpoint be useful elsewhere, if not just call it the watchpoint_scope breakpoint or something like that. FIXME). */ struct breakpoint *related_breakpoint; /* Holds the frame address which identifies the frame this watchpoint should be evaluated in, or `null' if the watchpoint should be evaluated on the outermost frame. */ struct frame_id watchpoint_frame; /* For hardware watchpoints, the triggered status according to the hardware. */ enum watchpoint_triggered watchpoint_triggered; /* Thread number for thread-specific breakpoint, or -1 if don't care. */ int thread; /* Ada task number for task-specific breakpoint, or 0 if don't care. */ int task; /* Count of the number of times this breakpoint was taken, dumped with the info, but not used for anything else. Useful for seeing how many times you hit a break prior to the program aborting, so you can back up to just before the abort. */ int hit_count; /* Process id of a child process whose forking triggered this catchpoint. This field is only valid immediately after this catchpoint has triggered. */ ptid_t forked_inferior_pid; /* Filename of a program whose exec triggered this catchpoint. This field is only valid immediately after this catchpoint has triggered. */ char *exec_pathname; /* Methods associated with this breakpoint. */ struct breakpoint_ops *ops; /* Is breakpoint's condition not yet parsed because we found no location initially so had no context to parse the condition in. */ int condition_not_parsed; /* Number of times this tracepoint should single-step and collect additional data. */ long step_count; /* Number of times this tracepoint should be hit before disabling/ending. */ int pass_count; /* Chain of action lines to execute when this tracepoint is hit. */ struct action_line *actions; }; typedef struct breakpoint *breakpoint_p; DEF_VEC_P(breakpoint_p); /* The following stuff is an abstract data type "bpstat" ("breakpoint status"). This provides the ability to determine whether we have stopped at a breakpoint, and what we should do about it. */ typedef struct bpstats *bpstat; /* Frees any storage that is part of a bpstat. Does not walk the 'next' chain. */ extern void bpstat_free (bpstat); /* Clears a chain of bpstat, freeing storage of each. */ extern void bpstat_clear (bpstat *); /* Return a copy of a bpstat. Like "bs1 = bs2" but all storage that is part of the bpstat is copied as well. */ extern bpstat bpstat_copy (bpstat); extern bpstat bpstat_stop_status (CORE_ADDR pc, ptid_t ptid); /* This bpstat_what stuff tells wait_for_inferior what to do with a breakpoint (a challenging task). */ enum bpstat_what_main_action { /* Perform various other tests; that is, this bpstat does not say to perform any action (e.g. failed watchpoint and nothing else). */ BPSTAT_WHAT_KEEP_CHECKING, /* Rather than distinguish between noisy and silent stops here, it might be cleaner to have bpstat_print make that decision (also taking into account stop_print_frame and source_only). But the implications are a bit scary (interaction with auto-displays, etc.), so I won't try it. */ /* Stop silently. */ BPSTAT_WHAT_STOP_SILENT, /* Stop and print. */ BPSTAT_WHAT_STOP_NOISY, /* Remove breakpoints, single step once, then put them back in and go back to what we were doing. It's possible that this should be removed from the main_action and put into a separate field, to more cleanly handle BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE. */ BPSTAT_WHAT_SINGLE, /* Set longjmp_resume breakpoint, remove all other breakpoints, and continue. The "remove all other breakpoints" part is required if we are also stepping over another breakpoint as well as doing the longjmp handling. */ BPSTAT_WHAT_SET_LONGJMP_RESUME, /* Clear longjmp_resume breakpoint, then handle as BPSTAT_WHAT_KEEP_CHECKING. */ BPSTAT_WHAT_CLEAR_LONGJMP_RESUME, /* Clear step resume breakpoint, and keep checking. */ BPSTAT_WHAT_STEP_RESUME, /* Check the dynamic linker's data structures for new libraries, then keep checking. */ BPSTAT_WHAT_CHECK_SHLIBS, /* This is just used to keep track of how many enums there are. */ BPSTAT_WHAT_LAST }; struct bpstat_what { enum bpstat_what_main_action main_action; /* Did we hit a call dummy breakpoint? This only goes with a main_action of BPSTAT_WHAT_STOP_SILENT or BPSTAT_WHAT_STOP_NOISY (the concept of continuing from a call dummy without popping the frame is not a useful one). */ int call_dummy; }; /* The possible return values for print_bpstat, print_it_normal, print_it_done, print_it_noop. */ enum print_stop_action { PRINT_UNKNOWN = -1, PRINT_SRC_AND_LOC, PRINT_SRC_ONLY, PRINT_NOTHING }; /* Tell what to do about this bpstat. */ struct bpstat_what bpstat_what (bpstat); /* Find the bpstat associated with a breakpoint. NULL otherwise. */ bpstat bpstat_find_breakpoint (bpstat, struct breakpoint *); /* Find a step_resume breakpoint associated with this bpstat. (If there are multiple step_resume bp's on the list, this function will arbitrarily pick one.) It is an error to use this function if BPSTAT doesn't contain a step_resume breakpoint. See wait_for_inferior's use of this function. */ extern struct breakpoint *bpstat_find_step_resume_breakpoint (bpstat); /* Nonzero if a signal that we got in wait() was due to circumstances explained by the BS. */ /* Currently that is true if we have hit a breakpoint, or if there is a watchpoint enabled. */ #define bpstat_explains_signal(bs) ((bs) != NULL) /* Nonzero if we should step constantly (e.g. watchpoints on machines without hardware support). This isn't related to a specific bpstat, just to things like whether watchpoints are set. */ extern int bpstat_should_step (void); /* Print a message indicating what happened. Returns nonzero to say that only the source line should be printed after this (zero return means print the frame as well as the source line). */ extern enum print_stop_action bpstat_print (bpstat); /* Put in *NUM the breakpoint number of the first breakpoint we are stopped at. *BSP upon return is a bpstat which points to the remaining breakpoints stopped at (but which is not guaranteed to be good for anything but further calls to bpstat_num). Return 0 if passed a bpstat which does not indicate any breakpoints. Return -1 if stopped at a breakpoint that has been deleted since we set it. Return 1 otherwise. */ extern int bpstat_num (bpstat *, int *); /* Perform actions associated with the stopped inferior. Actually, we just use this for breakpoint commands. Perhaps other actions will go here later, but this is executed at a late time (from the command loop). */ extern void bpstat_do_actions (void); /* Modify BS so that the actions will not be performed. */ extern void bpstat_clear_actions (bpstat); /* Implementation: */ /* Values used to tell the printing routine how to behave for this bpstat. */ enum bp_print_how { /* This is used when we want to do a normal printing of the reason for stopping. The output will depend on the type of eventpoint we are dealing with. This is the default value, most commonly used. */ print_it_normal, /* This is used when nothing should be printed for this bpstat entry. */ print_it_noop, /* This is used when everything which needs to be printed has already been printed. But we still want to print the frame. */ print_it_done }; struct bpstats { /* Linked list because there can be two breakpoints at the same place, and a bpstat reflects the fact that both have been hit. */ bpstat next; /* Breakpoint that we are at. */ const struct bp_location *breakpoint_at; /* Commands left to be done. */ struct command_line *commands; /* Old value associated with a watchpoint. */ struct value *old_val; /* Nonzero if this breakpoint tells us to print the frame. */ char print; /* Nonzero if this breakpoint tells us to stop. */ char stop; /* Tell bpstat_print and print_bp_stop_message how to print stuff associated with this element of the bpstat chain. */ enum bp_print_how print_it; }; enum inf_context { inf_starting, inf_running, inf_exited, inf_execd }; /* The possible return values for breakpoint_here_p. We guarantee that zero always means "no breakpoint here". */ enum breakpoint_here { no_breakpoint_here = 0, ordinary_breakpoint_here, permanent_breakpoint_here }; /* Prototypes for breakpoint-related functions. */ extern enum breakpoint_here breakpoint_here_p (CORE_ADDR); extern int moribund_breakpoint_here_p (CORE_ADDR); extern int breakpoint_inserted_here_p (CORE_ADDR); extern int regular_breakpoint_inserted_here_p (CORE_ADDR); extern int software_breakpoint_inserted_here_p (CORE_ADDR); extern int breakpoint_thread_match (CORE_ADDR, ptid_t); extern void until_break_command (char *, int, int); extern void breakpoint_re_set (void); extern void breakpoint_re_set_thread (struct breakpoint *); extern struct breakpoint *set_momentary_breakpoint (struct symtab_and_line, struct frame_id, enum bptype); extern struct breakpoint *set_momentary_breakpoint_at_pc (CORE_ADDR pc, enum bptype type); extern struct breakpoint *clone_momentary_breakpoint (struct breakpoint *bpkt); extern void set_ignore_count (int, int, int); extern void set_default_breakpoint (int, CORE_ADDR, struct symtab *, int); extern void breakpoint_init_inferior (enum inf_context); extern struct cleanup *make_cleanup_delete_breakpoint (struct breakpoint *); extern void delete_breakpoint (struct breakpoint *); extern void breakpoint_auto_delete (bpstat); extern void break_command (char *, int); extern void hbreak_command_wrapper (char *, int); extern void thbreak_command_wrapper (char *, int); extern void rbreak_command_wrapper (char *, int); extern void watch_command_wrapper (char *, int); extern void awatch_command_wrapper (char *, int); extern void rwatch_command_wrapper (char *, int); extern void tbreak_command (char *, int); extern void set_breakpoint (char *address, char *condition, int hardwareflag, int tempflag, int thread, int ignore_count, int pending, int enabled); extern void insert_breakpoints (void); extern int remove_breakpoints (void); /* This function can be used to physically insert eventpoints from the specified traced inferior process, without modifying the breakpoint package's state. This can be useful for those targets which support following the processes of a fork() or vfork() system call, when both of the resulting two processes are to be followed. */ extern int reattach_breakpoints (int); /* This function can be used to update the breakpoint package's state after an exec() system call has been executed. This function causes the following: - All eventpoints are marked "not inserted". - All eventpoints with a symbolic address are reset such that the symbolic address must be reevaluated before the eventpoints can be reinserted. - The solib breakpoints are explicitly removed from the breakpoint list. - A step-resume breakpoint, if any, is explicitly removed from the breakpoint list. - All eventpoints without a symbolic address are removed from the breakpoint list. */ extern void update_breakpoints_after_exec (void); /* This function can be used to physically remove hardware breakpoints and watchpoints from the specified traced inferior process, without modifying the breakpoint package's state. This can be useful for those targets which support following the processes of a fork() or vfork() system call, when one of the resulting two processes is to be detached and allowed to run free. It is an error to use this function on the process whose id is inferior_ptid. */ extern int detach_breakpoints (int); extern void set_longjmp_breakpoint (void); extern void delete_longjmp_breakpoint (int thread); extern void enable_overlay_breakpoints (void); extern void disable_overlay_breakpoints (void); /* These functions respectively disable or reenable all currently enabled watchpoints. When disabled, the watchpoints are marked call_disabled. When reenabled, they are marked enabled. The intended client of these functions is call_function_by_hand. The inferior must be stopped, and all breakpoints removed, when these functions are used. The need for these functions is that on some targets (e.g., HP-UX), gdb is unable to unwind through the dummy frame that is pushed as part of the implementation of a call command. Watchpoints can cause the inferior to stop in places where this frame is visible, and that can cause execution control to become very confused. Note that if a user sets breakpoints in an interactively called function, the call_disabled watchpoints will have been reenabled when the first such breakpoint is reached. However, on targets that are unable to unwind through the call dummy frame, watches of stack-based storage may then be deleted, because gdb will believe that their watched storage is out of scope. (Sigh.) */ extern void disable_watchpoints_before_interactive_call_start (void); extern void enable_watchpoints_after_interactive_call_stop (void); /* For script interpreters that need to define breakpoint commands after they've already read the commands into a struct command_line. */ extern enum command_control_type commands_from_control_command (char *arg, struct command_line *cmd); extern void clear_breakpoint_hit_counts (void); extern int get_number (char **); extern int get_number_or_range (char **); /* The following are for displays, which aren't really breakpoints, but here is as good a place as any for them. */ extern void disable_current_display (void); extern void do_displays (void); extern void disable_display (int); extern void clear_displays (void); extern void disable_breakpoint (struct breakpoint *); extern void enable_breakpoint (struct breakpoint *); /* Clear the "inserted" flag in all breakpoints. */ extern void mark_breakpoints_out (void); extern void make_breakpoint_permanent (struct breakpoint *); extern struct breakpoint *create_solib_event_breakpoint (CORE_ADDR); extern struct breakpoint *create_thread_event_breakpoint (CORE_ADDR); extern void remove_solib_event_breakpoints (void); extern void remove_thread_event_breakpoints (void); extern void disable_breakpoints_in_shlibs (void); /* This function returns TRUE if ep is a catchpoint. */ extern int ep_is_catchpoint (struct breakpoint *); /* Enable breakpoints and delete when hit. Called with ARG == NULL deletes all breakpoints. */ extern void delete_command (char *arg, int from_tty); /* Pull all H/W watchpoints from the target. Return non-zero if the remove fails. */ extern int remove_hw_watchpoints (void); /* Manage a software single step breakpoint (or two). Insert may be called twice before remove is called. */ extern void insert_single_step_breakpoint (CORE_ADDR); extern void remove_single_step_breakpoints (void); /* Manage manual breakpoints, separate from the normal chain of breakpoints. These functions are used in murky target-specific ways. Please do not add more uses! */ extern void *deprecated_insert_raw_breakpoint (CORE_ADDR); extern int deprecated_remove_raw_breakpoint (void *); /* Check if any hardware watchpoints have triggered, according to the target. */ int watchpoints_triggered (struct target_waitstatus *); /* Update BUF, which is LEN bytes read from the target address MEMADDR, by replacing any memory breakpoints with their shadowed contents. */ void breakpoint_restore_shadows (gdb_byte *buf, ULONGEST memaddr, LONGEST len); extern int breakpoints_always_inserted_mode (void); /* Called each time new event from target is processed. Retires previously deleted breakpoint locations that in our opinion won't ever trigger. */ extern void breakpoint_retire_moribund (void); /* Tell a breakpoint to be quiet. */ extern void make_breakpoint_silent (struct breakpoint *); /* Return a tracepoint with the given number if found. */ extern struct breakpoint *get_tracepoint (int num); /* Find a tracepoint by parsing a number in the supplied string. */ extern struct breakpoint *get_tracepoint_by_number (char **arg, int multi_p, int optional_p); /* Return a vector of all tracepoints currently defined. The vector is newly allocated; the caller should free when done with it. */ extern VEC(breakpoint_p) *all_tracepoints (void); #endif /* !defined (BREAKPOINT_H) */