/* Low level interface to ptrace, for GDB when running under m68k SVR2 Unix
   on Altos 3068.  Report bugs to Jyrki Kuoppala <jkp@cs.hut.fi>
   Copyright (C) 1989 Free Software Foundation, Inc.

This file is part of GDB.

GDB is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 1, or (at your option)
any later version.

GDB is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with GDB; see the file COPYING.  If not, write to
the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */

#include "defs.h"
#include "param.h"
#include "frame.h"
#include "inferior.h"

#ifdef USG
#include <sys/types.h>
#endif

#include <stdio.h>
#include <sys/param.h>
#include <sys/dir.h>
#include <signal.h>
#include <sys/ioctl.h>
#include <fcntl.h>
#ifdef USG
#include <sys/page.h>
#ifdef ALTOS
#include <sys/net.h>
#include <errno.h>
#endif
#endif

#ifdef COFF_ENCAPSULATE
#include "a.out.encap.h"
#else
#include <a.out.h>
#endif
#ifndef N_SET_MAGIC
#define N_SET_MAGIC(exec, val) ((exec).a_magic = (val))
#endif

#include <sys/user.h>		/* After a.out.h  */
#include <sys/file.h>
#include <sys/stat.h>

extern int errno;

/* This function simply calls ptrace with the given arguments.  
   It exists so that all calls to ptrace are isolated in this 
   machine-dependent file. */
int
call_ptrace (request, pid, arg3, arg4)
     int request, pid, arg3, arg4;
{
  return ptrace (request, pid, arg3, arg4);
}

kill_inferior ()
{
  if (remote_debugging)
    return;
  if (inferior_pid == 0)
    return;
  ptrace (8, inferior_pid, 0, 0);
  wait (0);
  inferior_died ();
}

/* This is used when GDB is exiting.  It gives less chance of error.*/

kill_inferior_fast ()
{
  if (remote_debugging)
    return;
  if (inferior_pid == 0)
    return;
  ptrace (8, inferior_pid, 0, 0);
  wait (0);
}

/* Resume execution of the inferior process.
   If STEP is nonzero, single-step it.
   If SIGNAL is nonzero, give it that signal.  */

void
resume (step, signal)
     int step;
     int signal;
{
  errno = 0;
  if (remote_debugging)
    remote_resume (step, signal);
  else
    {
      ptrace (step ? 9 : 7, inferior_pid, 1, signal);
      if (errno)
	perror_with_name ("ptrace");
    }
}

void
fetch_inferior_registers ()
{
  register int regno;
  register unsigned int regaddr;
  char buf[MAX_REGISTER_RAW_SIZE];
  register int i;

  struct user u;
  unsigned int offset = (char *) &u.u_state - (char *) &u;
  offset = ptrace (3, inferior_pid, offset, 0) - KERNEL_U_ADDR;

  for (regno = 0; regno < NUM_REGS; regno++)
    {
      regaddr = register_addr (regno, offset);
      for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof (int))
 	{
 	  *(int *) &buf[i] = ptrace (3, inferior_pid, regaddr, 0);
 	  regaddr += sizeof (int);
 	}
      supply_register (regno, buf);
    }
}

/* Store our register values back into the inferior.
   If REGNO is -1, do this for all registers.
   Otherwise, REGNO specifies which register (so we can save time).  */

store_inferior_registers (regno)
     int regno;
{
  register unsigned int regaddr;
  char buf[80];

  struct user u;
  unsigned int offset = (char *) &u.u_state - (char *) &u;
  offset = ptrace (3, inferior_pid, offset, 0) - KERNEL_U_ADDR;

  if (regno >= 0)
    {
      regaddr = register_addr (regno, offset);
      errno = 0;
      ptrace (6, inferior_pid, regaddr, read_register (regno));
      if (errno != 0)
	{
	  sprintf (buf, "writing register number %d", regno);
	  perror_with_name (buf);
	}
    }
  else for (regno = 0; regno < NUM_REGS; regno++)
    {
      regaddr = register_addr (regno, offset);
      errno = 0;
      ptrace (6, inferior_pid, regaddr, read_register (regno));
      if (errno != 0)
	{
	  sprintf (buf, "writing all regs, number %d", regno);
	  perror_with_name (buf);
	}
    }
}

/* Copy LEN bytes from inferior's memory starting at MEMADDR
   to debugger memory starting at MYADDR. 
   On failure (cannot read from inferior, usually because address is out
   of bounds) returns the value of errno. */

int
read_inferior_memory (memaddr, myaddr, len)
     CORE_ADDR memaddr;
     char *myaddr;
     int len;
{
  register int i;
  /* Round starting address down to longword boundary.  */
  register CORE_ADDR addr = memaddr & - sizeof (int);
  /* Round ending address up; get number of longwords that makes.  */
  register int count
    = (((memaddr + len) - addr) + sizeof (int) - 1) / sizeof (int);
  /* Allocate buffer of that many longwords.  */
  register int *buffer = (int *) alloca (count * sizeof (int));
  extern int errno;

  /* Read all the longwords */
  for (i = 0; i < count; i++, addr += sizeof (int))
    {
      errno = 0;
      if (remote_debugging)
	buffer[i] = remote_fetch_word (addr);
      else
	buffer[i] = ptrace (1, inferior_pid, addr, 0);
      if (errno)
	return errno;
    }

  /* Copy appropriate bytes out of the buffer.  */
  bcopy ((char *) buffer + (memaddr & (sizeof (int) - 1)), myaddr, len);
  return 0;
}

/* Copy LEN bytes of data from debugger memory at MYADDR
   to inferior's memory at MEMADDR.
   On failure (cannot write the inferior)
   returns the value of errno.  */

int
write_inferior_memory (memaddr, myaddr, len)
     CORE_ADDR memaddr;
     char *myaddr;
     int len;
{
  register int i;
  /* Round starting address down to longword boundary.  */
  register CORE_ADDR addr = memaddr & - sizeof (int);
  /* Round ending address up; get number of longwords that makes.  */
  register int count
    = (((memaddr + len) - addr) + sizeof (int) - 1) / sizeof (int);
  /* Allocate buffer of that many longwords.  */
  register int *buffer = (int *) alloca (count * sizeof (int));
  extern int errno;

  /* Fill start and end extra bytes of buffer with existing memory data.  */

  if (remote_debugging)
    buffer[0] = remote_fetch_word (addr);
  else
    buffer[0] = ptrace (1, inferior_pid, addr, 0);

  if (count > 1)
    {
      if (remote_debugging)
	buffer[count - 1]
	  = remote_fetch_word (addr + (count - 1) * sizeof (int));
      else
	buffer[count - 1]
	  = ptrace (1, inferior_pid,
		    addr + (count - 1) * sizeof (int), 0);
    }

  /* Copy data to be written over corresponding part of buffer */

  bcopy (myaddr, (char *) buffer + (memaddr & (sizeof (int) - 1)), len);

  /* Write the entire buffer.  */

  for (i = 0; i < count; i++, addr += sizeof (int))
    {
      errno = 0;
      if (remote_debugging)
	remote_store_word (addr, buffer[i]);
      else
	ptrace (4, inferior_pid, addr, buffer[i]);
      if (errno)
	return errno;
    }

  return 0;
}

/* Work with core dump and executable files, for GDB. 
   This code would be in core.c if it weren't machine-dependent. */

#ifndef N_TXTADDR
#define N_TXTADDR(hdr) 0
#endif /* no N_TXTADDR */

#ifndef N_DATADDR
#define N_DATADDR(hdr) hdr.a_text
#endif /* no N_DATADDR */

/* Make COFF and non-COFF names for things a little more compatible
   to reduce conditionals later.  */

#ifdef COFF_FORMAT
#define a_magic magic
#endif

#ifndef COFF_FORMAT
#ifndef AOUTHDR
#define AOUTHDR struct exec
#endif
#endif

extern char *sys_siglist[];


/* Hook for `exec_file_command' command to call.  */

extern void (*exec_file_display_hook) ();
   
/* File names of core file and executable file.  */

extern char *corefile;
extern char *execfile;

/* Descriptors on which core file and executable file are open.
   Note that the execchan is closed when an inferior is created
   and reopened if the inferior dies or is killed.  */

extern int corechan;
extern int execchan;

/* Last modification time of executable file.
   Also used in source.c to compare against mtime of a source file.  */

extern int exec_mtime;

/* Virtual addresses of bounds of the two areas of memory in the core file.  */

extern CORE_ADDR data_start;
extern CORE_ADDR data_end;
extern CORE_ADDR stack_start;
extern CORE_ADDR stack_end;

/* Virtual addresses of bounds of two areas of memory in the exec file.
   Note that the data area in the exec file is used only when there is no core file.  */

extern CORE_ADDR text_start;
extern CORE_ADDR text_end;

extern CORE_ADDR exec_data_start;
extern CORE_ADDR exec_data_end;

/* Address in executable file of start of text area data.  */

extern int text_offset;

/* Address in executable file of start of data area data.  */

extern int exec_data_offset;

/* Address in core file of start of data area data.  */

extern int data_offset;

/* Address in core file of start of stack area data.  */

extern int stack_offset;

#ifdef COFF_FORMAT
/* various coff data structures */

extern FILHDR file_hdr;
extern SCNHDR text_hdr;
extern SCNHDR data_hdr;

#endif /* not COFF_FORMAT */

/* a.out header saved in core file.  */
  
extern AOUTHDR core_aouthdr;

/* a.out header of exec file.  */

extern AOUTHDR exec_aouthdr;

extern void validate_files ();

core_file_command (filename, from_tty)
     char *filename;
     int from_tty;
{
  int val;
  extern char registers[];

  /* Discard all vestiges of any previous core file
     and mark data and stack spaces as empty.  */

  if (corefile)
    free (corefile);
  corefile = 0;

  if (corechan >= 0)
    close (corechan);
  corechan = -1;

  data_start = 0;
  data_end = 0;
  stack_start = STACK_END_ADDR;
  stack_end = STACK_END_ADDR;

  /* Now, if a new core file was specified, open it and digest it.  */

  if (filename)
    {
      filename = tilde_expand (filename);
      make_cleanup (free, filename);
      
      if (have_inferior_p ())
	error ("To look at a core file, you must kill the inferior with \"kill\".");
      corechan = open (filename, O_RDONLY, 0);
      if (corechan < 0)
	perror_with_name (filename);
      /* 4.2-style (and perhaps also sysV-style) core dump file.  */
      {
	struct user u;

	unsigned int reg_offset;

	val = myread (corechan, &u, sizeof u);
	if (val < 0)
	  perror_with_name ("Not a core file: reading upage");
	if (val != sizeof u)
	  error ("Not a core file: could only read %d bytes", val);
	data_start = exec_data_start;

#define NBPG NBPP
#define UPAGES USIZE

	data_end = data_start + NBPG * u.u_dsize;
	stack_start = stack_end - NBPG * u.u_ssize;
	data_offset = NBPG * UPAGES + exec_data_start % NBPG /* Not sure about this //jkp */;
	stack_offset = NBPG * (UPAGES + u.u_dsize);

	/* Some machines put an absolute address in here and some put
	   the offset in the upage of the regs.  */
	reg_offset = (int) u.u_state;
	if (reg_offset > NBPG * UPAGES)
	  reg_offset -= KERNEL_U_ADDR;

	bcopy (&u.u_exdata, &core_aouthdr, sizeof (AOUTHDR));
	printf ("Core file is from \"%s\".\n", u.u_comm);

	/* I don't know where to find this info.
	   So, for now, mark it as not available.  */
	N_SET_MAGIC (core_aouthdr, 0);

	/* Read the register values out of the core file and store
	   them where `read_register' will find them.  */

	{
	  register int regno;

	  for (regno = 0; regno < NUM_REGS; regno++)
	    {
	      char buf[MAX_REGISTER_RAW_SIZE];

	      val = lseek (corechan, register_addr (regno, reg_offset), 0);
	      if (val < 0
		  || (val = myread (corechan, buf, sizeof buf)) < 0)
		{
		  char * buffer = (char *) alloca (strlen (reg_names[regno])
						   + 30);
		  strcpy (buffer, "Reading register ");
		  strcat (buffer, reg_names[regno]);
						   
		  perror_with_name (buffer);
		}

	      supply_register (regno, buf);
	    }
	}
      }
      if (filename[0] == '/')
	corefile = savestring (filename, strlen (filename));
      else
	{
	  corefile = concat (current_directory, "/", filename);
	}

      set_current_frame ( create_new_frame (read_register (FP_REGNUM),
					    read_pc ()));
      select_frame (get_current_frame (), 0);
      validate_files ();
    }
  else if (from_tty)
    printf ("No core file now.\n");
}

exec_file_command (filename, from_tty)
     char *filename;
     int from_tty;
{
  int val;

  /* Eliminate all traces of old exec file.
     Mark text segment as empty.  */

  if (execfile)
    free (execfile);
  execfile = 0;
  data_start = 0;
  data_end -= exec_data_start;
  text_start = 0;
  text_end = 0;
  exec_data_start = 0;
  exec_data_end = 0;
  if (execchan >= 0)
    close (execchan);
  execchan = -1;

  /* Now open and digest the file the user requested, if any.  */

  if (filename)
    {
      filename = tilde_expand (filename);
      make_cleanup (free, filename);
      
      execchan = openp (getenv ("PATH"), 1, filename, O_RDONLY, 0,
			&execfile);
      if (execchan < 0)
	perror_with_name (filename);

#ifdef COFF_FORMAT
      {
	int aout_hdrsize;
	int num_sections;

	if (read_file_hdr (execchan, &file_hdr) < 0)
	  error ("\"%s\": not in executable format.", execfile);

	aout_hdrsize = file_hdr.f_opthdr;
	num_sections = file_hdr.f_nscns;

	if (read_aout_hdr (execchan, &exec_aouthdr, aout_hdrsize) < 0)
	  error ("\"%s\": can't read optional aouthdr", execfile);

	if (read_section_hdr (execchan, _TEXT, &text_hdr, num_sections) < 0)
	  error ("\"%s\": can't read text section header", execfile);

	if (read_section_hdr (execchan, _DATA, &data_hdr, num_sections) < 0)
	  error ("\"%s\": can't read data section header", execfile);

	text_start = exec_aouthdr.text_start;
	text_end = text_start + exec_aouthdr.tsize;
	text_offset = text_hdr.s_scnptr;
	exec_data_start = exec_aouthdr.data_start;
	exec_data_end = exec_data_start + exec_aouthdr.dsize;
	exec_data_offset = data_hdr.s_scnptr;
	data_start = exec_data_start;
	data_end += exec_data_start;
	exec_mtime = file_hdr.f_timdat;
      }
#else /* not COFF_FORMAT */
      {
	struct stat st_exec;

#ifdef HEADER_SEEK_FD
	HEADER_SEEK_FD (execchan);
#endif
	
	val = myread (execchan, &exec_aouthdr, sizeof (AOUTHDR));

	if (val < 0)
	  perror_with_name (filename);

        text_start = N_TXTADDR (exec_aouthdr);
        exec_data_start = N_DATADDR (exec_aouthdr);

	text_offset = N_TXTOFF (exec_aouthdr);
	exec_data_offset = N_TXTOFF (exec_aouthdr) + exec_aouthdr.a_text;

	text_end = text_start + exec_aouthdr.a_text;
        exec_data_end = exec_data_start + exec_aouthdr.a_data;
	data_start = exec_data_start;
	data_end += exec_data_start;

	fstat (execchan, &st_exec);
	exec_mtime = st_exec.st_mtime;
      }
#endif /* not COFF_FORMAT */

      validate_files ();
    }
  else if (from_tty)
    printf ("No exec file now.\n");

  /* Tell display code (if any) about the changed file name.  */
  if (exec_file_display_hook)
    (*exec_file_display_hook) (filename);
}