##Copyright (C) 1989-1991 Free Software Foundation, Inc. # This file is part of GDB. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. prefix = /usr/local bindir = $(prefix)/bin datadir = $(prefix)/lib libdir = $(prefix)/lib mandir = $(datadir)/man man1dir = $(mandir)/man1 man2dir = $(mandir)/man2 man3dir = $(mandir)/man3 man4dir = $(mandir)/man4 man5dir = $(mandir)/man5 man6dir = $(mandir)/man6 man7dir = $(mandir)/man7 man8dir = $(mandir)/man8 man9dir = $(mandir)/man9 infodir = $(datadir)/info includedir = $(prefix)/include docdir = $(datadir)/doc SHELL = /bin/sh INSTALL = install -c INSTALL_PROGRAM = $(INSTALL) INSTALL_DATA = $(INSTALL) AR = ar AR_FLAGS = qv RANLIB = ranlib # Flags that describe where you can find the termcap library. # This can be overridden in the host Makefile fragment file. TERMCAP = -ltermcap #### Host, target, and site specific Makefile fragments come in here. ### # Host and target-dependent makefile fragments come in here. #### # End of host and target-dependent makefile fragments # System V: If you compile gdb with a compiler which uses the coff # encapsulation feature (this is a function of the compiler used, NOT # of the m-?.h file selected by config.gdb), you must make sure that # the GNU nm is the one that is used by munch. # If you are compiling with GCC, make sure that either 1) You use the # -traditional flag, or 2) You have the fixed include files where GCC # can reach them. Otherwise the ioctl calls in inflow.c # will be incorrectly compiled. The "fixincludes" script in the gcc # distribution will fix your include files up. #CC=cc #CC=gcc -traditional GCC=gcc # Directory containing source files. Don't clean up the spacing, # this exact string is matched for by the "configure" script. srcdir = . # It is also possible that you will need to add -I/usr/include/sys to the # CFLAGS section if your system doesn't have fcntl.h in /usr/include (which # is where it should be according to Posix). BISON=bison -y BISONFLAGS= YACC=$(BISON) $(BISONFLAGS) # YACC=yacc MAKE=make # Documentation (gdb.dvi) needs either GNU m4 or SysV m4; # Berkeley/Sun don't have quite enough. #M4=/usr/5bin/m4 M4=gm4 # where to find texinfo; GDB dist should include a recent one TEXIDIR=${srcdir}/../texinfo/fsf # where to find makeinfo, preferably one designed for texinfo-2 MAKEINFO=makeinfo # Set this up with gcc if you have gnu ld and the loader will print out # line numbers for undefinded refs. #CC-LD=gcc -static CC-LD=${CC} # define this to be "gmalloc.o" if you want to use the gnu malloc routine # (useful for debugging memory allocation problems in gdb). To use your # system malloc, uncomment the following two lines. #GNU_MALLOC = #MALLOC_CFLAGS = -DNO_MALLOC_CHECK GNU_MALLOC = gmalloc.o mcheck.o mtrace.o MALLOC_CFLAGS = # Where is the "include" directory? Traditionally ../include or ./include INCLUDE_DIR = ${srcdir}/../include INCLUDE_DEP = $$(INCLUDE_DIR) # Where is the source dir for the BFD library? Traditionally ../bfd or ./bfd # (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.) BFD_DIR = ${srcdir}/../bfd BFD_DEP = $$(BFD_DIR) BFD_LIB = $(unsubdir)/../bfd${subdir}/libbfd.a # Where is the source dir for the READLINE library? Traditionally in .. or . # (For the binary library built from it, we use ${READLINE_DIR}${subdir}.) READLINE_DIR = ${srcdir}/../readline READLINE_DEP = $$(READLINE_DIR) RL_LIB = $(unsubdir)/../readline${subdir}/libreadline.a # All the includes used for CFLAGS and for lint. # -I. for config files. # -I${srcdir} possibly for regex.h also. INCLUDE_CFLAGS = -I. -I${srcdir} -I$(INCLUDE_DIR) -I$(READLINE_DIR) -I${srcdir}/vx-share # {X,T}M_CFLAGS, if defined, has system-dependent CFLAGS. # CFLAGS for GDB MINUS_G=-g GLOBAL_CFLAGS = ${MINUS_G} ${TM_CFLAGS} ${XM_CFLAGS} #PROFILE_CFLAGS = -pg # CFLAGS is the aggregate of several individual *_CFLAGS macros. # USER_CFLAGS is specifically reserved for setting from the command line # when running make. I.E. "make USER_CFLAGS=-Wmissing-prototypes". CFLAGS = ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MALLOC_CFLAGS} ${INCLUDE_CFLAGS} ${USER_CFLAGS} # None of the things in CFLAGS will do any harm, and on some systems # (e.g. SunOS4) it is important to use the M_CFLAGS. LDFLAGS = $(CFLAGS) # Where is the "-liberty" library, containing getopt and obstack? LIBIBERTY_DIR = ${srcdir}/../libiberty LIBIBERTY = $(unsubdir)/../libiberty${subdir}/libiberty.a # The config/mh-* file must define REGEX and REGEX1 on USG machines. # If your sysyem is missing alloca(), or, more likely, it's there but # it doesn't work, define ALLOCA & ALLOCA1 too. # If your system is missing putenv(), add putenv.c to XM_ADD_FILES. # Libraries and corresponding dependencies for compiling gdb. # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs. # TERMCAP comes after readline, since readline depends on it. CLIBS = ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${LIBIBERTY} ${XM_CLIBS} ${TM_CLIBS} CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${BFD_LIB} ${LIBIBERTY} ${RL_LIB} ADD_FILES = ${REGEX} ${ALLOCA} ${GNU_MALLOC} ${XM_ADD_FILES} ${TM_ADD_FILES} ADD_DEPS = ${REGEX1} ${ALLOCA1} ${GNU_MALLOC} ${XM_ADD_FILES} ${TM_ADD_FILES} VERSION = 4.3.2 DIST=gdb LINT=/usr/5bin/lint LINTFLAGS= -I${BFD_DIR} # Source files in the main directory. # Files which are included via a config/* Makefile fragment # should *not* be specified here; they're in "ALLDEPFILES". SFILES_MAINDIR = \ blockframe.c breakpoint.c command.c core.c \ environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \ main.c printcmd.c \ remote.c source.c stack.c symmisc.c symtab.c symfile.c \ utils.c valarith.c valops.c valprint.c values.c c-exp.y m2-exp.y \ signame.c cplus-dem.c mem-break.c target.c inftarg.c \ dbxread.c coffread.c elfread.c dwarfread.c xcoffread.c \ ieee-float.c language.c parse.c buildsym.c # Source files in subdirectories (which will be handled separately by # 'make gdb.tar.Z'). # Files which are included via a config/* Makefile fragment # should *not* be specified here; they're in "ALLDEPFILES". SFILES_SUBDIR = \ ${srcdir}/vx-share/dbgRpcLib.h \ ${srcdir}/vx-share/ptrace.h \ ${srcdir}/vx-share/reg.h \ ${srcdir}/vx-share/vxTypes.h \ ${srcdir}/vx-share/vxWorks.h \ ${srcdir}/vx-share/wait.h \ ${srcdir}/vx-share/xdr_ld.h \ ${srcdir}/vx-share/xdr_ptrace.h \ ${srcdir}/vx-share/xdr_rdb.h \ ${srcdir}/vx-share/xdr_regs.h \ ${srcdir}/nindy-share/b.out.h \ ${srcdir}/nindy-share/block_io.h \ ${srcdir}/nindy-share/coff.h \ ${srcdir}/nindy-share/demux.h \ ${srcdir}/nindy-share/env.h \ ${srcdir}/nindy-share/stop.h \ ${srcdir}/nindy-share/ttycntl.h # Non-source files in subdirs, that should go into gdb.tar.Z. NONSRC_SUBDIR = \ ${srcdir}/nindy-share/Makefile \ ${srcdir}/nindy-share/VERSION # All source files that go into linking GDB, except config-specified files. SFILES = $(SFILES_MAINDIR) $(SFILES_SUBDIR) # All source files that lint should look at LINTFILES = $(SFILES) $(YYFILES) init.c # Any additional files specified on these lines should also be added to # the OTHERS = definition below, so they go in the tar files. SFILES_STAND = $(SFILES) standalone.c SFILES_KGDB = $(SFILES) stuff.c kdb-start.c # Header files that are not named in config/* Makefile fragments go here. HFILES= breakpoint.h buildsym.h command.h defs.h environ.h \ expression.h frame.h gdbcmd.h gdbcore.h \ ieee-float.h inferior.h minimon.h \ signals.h signame.h symfile.h symtab.h \ target.h terminal.h tm-68k.h tm-i960.h tm-sunos.h tm-sysv4.h \ xm-m68k.h xm-sysv4.h language.h parser-defs.h value.h # Header files for machine opcode tables. # when OPCODE_DIR changes to ../include, remove the whole $(OPCODES) # business, since they will be put into the GDB release files by somebody else. OPCODE_DIR1 = ../include/opcode/ OPCODE_DIR2 = ./ OPCODES = $(OPCODE_DIR1)pn.h $(OPCODE_DIR1)np1.h \ $(OPCODE_DIR1)sparc.h $(OPCODE_DIR1)vax.h \ $(OPCODE_DIR1)m68k.h $(OPCODE_DIR2)ns32k-opcode.h \ $(OPCODE_DIR2)convx-opcode.h $(OPCODE_DIR1)pyr.h \ $(OPCODE_DIR1)mips.h $(OPCODE_DIR2)am29k-opcode.h \ $(OPCODE_DIR1)arm.h $(OPCODE_DIR1)m88k.h \ $(OPCODE_DIR1)tahoe.h $(OPCODE_DIR2)rs6k-opcode.h \ $(OPCODE_DIR1)h8300.h $(OPCODE_DIR1)i960.h \ $(OPCODE_DIR1)i386.h $(OPCODE_DIR1)i860.h REMOTE_EXAMPLES = m68k-stub.c i386-stub.c rem-multi.shar MALLOCSRC = gmalloc.c mcheck.c mtrace.c mtrace.awk \ ansidecl.h gmalloc.h POSSLIBS_MAINDIR = regex.c regex.h alloca.c $(MALLOCSRC) POSSLIBS = $(POSSLIBS_MAINDIR) TESTS = testbpt.c testfun.c testrec.c testreg.c testregs.c OTHERS = Makefile.in depend alldeps.mak createtags munch configure.in \ ChangeLog ChangeLog-3.x gdb.1 refcard.ps \ README TODO TAGS WHATS.NEW Projects \ .gdbinit COPYING $(YYFILES) \ copying.c Convex.notes copying.awk \ saber.suppress standalone.c stuff.c kdb-start.c \ putenv.c # Subdirectories of gdb, which should be included in their entirety in # gdb-xxx.tar.Z: TARDIRS = doc # tests # GDB "info" files, which should be included in their entirety INFOFILES = gdb.info* DEPFILES= ${TDEPFILES} ${XDEPFILES} SOURCES=$(SFILES) $(ALLDEPFILES) $(YYFILES) TAGFILES = $(SOURCES) ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS} TAGFILES_MAINDIR = $(SFILES_MAINDIR) $(ALLDEPFILES_MAINDIR) \ ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS_MAINDIR} TARFILES = ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES} OBS = main.o blockframe.o breakpoint.o findvar.o stack.o source.o \ values.o eval.o valops.o valarith.o valprint.o printcmd.o \ symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \ command.o utils.o expprint.o environ.o version.o \ copying.o $(DEPFILES) signame.o cplus-dem.o mem-break.o target.o \ inftarg.o ieee-float.o putenv.o parse.o language.o $(YYOBJ) \ buildsym.o \ dbxread.o coffread.o elfread.o dwarfread.o xcoffread.o # mipsread.o RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES) TSOBS = core.o inflow.o NTSOBS = standalone.o TSSTART = /lib/crt0.o NTSSTART = kdb-start.o SUBDIRS = doc # For now, shortcut the "configure GDB for fewer languages" stuff. YYFILES = c-exp.tab.c m2-exp.tab.c YYOBJ = c-exp.tab.o m2-exp.tab.o # Prevent Sun make from putting in the machine type. Setting # TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1. .c.o: ${CC} -c ${CFLAGS} $< all: gdb $(MAKE) subdir_do DO=all "DODIRS=$(SUBDIRS)" info: force $(MAKE) subdir_do DO=info "DODIRS=$(SUBDIRS)" install-info: force $(MAKE) subdir_do DO=install-info "DODIRS=$(SUBDIRS)" clean-info: force $(MAKE) subdir_do DO=clean-info "DODIRS=$(SUBDIRS)" gdb.z:gdb.1 nroff -man $(srcdir)/gdb.1 | col -b > gdb.t pack gdb.t ; rm -f gdb.t mv gdb.t.z gdb.z install: gdb $(INSTALL_PROGRAM) gdb $(bindir)/gdb $(M_INSTALL) $(MAKE) subdir_do DO=install "DODIRS=$(SUBDIRS)" init.c: $(srcdir)/munch $(OBS) $(TSOBS) $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) > init.c gdb: $(OBS) $(TSOBS) ${ADD_DEPS} ${CDEPS} init.o ${CC-LD} $(LDFLAGS) -o gdb init.o $(OBS) $(TSOBS) $(ADD_FILES) \ $(CLIBS) $(LOADLIBES) saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS #load ./init.c $(SFILES) #unload ${srcdir}/c-exp.y ${srcdir}/m2-exp.y ${srcdir}/vx-share/*.h #unload ${srcdir}/nindy-share/[A-Z]* #load c-exp.tab.c m2-exp.tab.c #load copying.c version.c #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'` #load ${LIBIBERTY_DIR}/*.c #load ${BFD_DIR}/*.c #load ${READLINE_DIR}/*.c #load -ltermcap ##void mcheck(a) void (*a)(); { } ##void mtrace() { } # This is useful when debugging GDB, because some Unix's don't let you run GDB # on itself without copying the executable. So "make gdb1" will make # gdb and put a copy in gdb1, and you can run it with "gdb gdb1". # Removing gdb1 before the copy is the right thing if gdb1 is open # in another process. gdb1: gdb rm -f gdb1 cp gdb gdb1 # This is a remote stub which runs under unix and starts up an # inferior process. This is at least useful for debugging GDB's # remote support. rapp: $(RAPP_OBS) rm -f rapp_init.c ${srcdir}/munch ${MUNCH_DEFINE} ${RAPP_OBS} > rapp_init.c ${CC-LD} $(LDFLAGS) -o $@ rapp_init.c $(RAPP_OBS) # Support for building Makefile out of configured pieces, automatically # generated dependencies, etc. alldeps.mak is a file that contains # "make" variable definitions for all ALLDEPFILES, ALLDEPFILES_MAINDIR, # ALLDEPFILES_SUBDIR, ALLPARAM, and ALLCONFIG, all cadged from the current # contents of the config subdirectory. alldeps.mak: ${srcdir}/config rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp for i in `ls -d ${srcdir}/config/m[ht]-*` ; do \ echo $$i >>allconfig.tmp; \ awk <$$i ' \ $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" { \ for (i = 2; i <= NF; i++) \ print $$i >> "alldeps.tmp" ; \ } \ $$1 == "TM_FILE=" || $$1 == "XM_FILE=" { \ print $$2 >> "allparam.tmp" }' ; \ done sort alldeps2.tmp echo '# Start of "alldeps.mak" definitions' \ >>alldeps.mak; echo 'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR)' \ >>alldeps.mak; grep -v / alldeps2.tmp | \ awk 'BEGIN {printf "ALLDEPFILES_MAINDIR="} \ NR == 0 {printf $$0;} \ NR != 0 {printf "\\\n" $$0} \ END {printf "\n\n"}' >>alldeps.mak; grep / alldeps2.tmp | \ awk 'BEGIN {printf "ALLDEPFILES_SUBDIR="} \ NR == 0 {printf $$0;} \ NR != 0 {printf "\\\n" $$0} \ END {printf "\n\n"}' >>alldeps.mak; sort >alldeps.mak; sort >alldeps.mak; echo '# End of "alldeps.mak" definitions' \ >>alldeps.mak; rm -f alldeps.tmp alldeps2.tmp allparam.tmp allconfig.tmp # The sed script makes everything which depends on {x,t}m.h depend on # config.status as well, in case someone reconfigures gdb out from # under an already compiled gdb. depend: $(SOURCES) Makefile.in @echo Ignore errors about non-existent system-supplied include files @echo for systems other than the one you are using. @echo "If xm.h and tm.h don't exist, the error messages saying so" @echo can safely be ignored. @echo Also ignore parse errors in valops.c, and any errors in @echo arm-convert.s. -$(GCC) -MM $(CFLAGS) -I$(BFD_DIR) \ `ls $(SOURCES) | grep -v '\.[hy]$$' |sort -u` >depend.tmp # If running in srcdir, translate "./foo.c" into "$srcdir/foo.c" except # for xm.h and tm.h. This allows the same "depend" file to be used # by the various subdirectories. if [ "${srcdir}" = "." ] ; then \ depend.tm2; \ rm depend.tmp; \ mv depend.tm2 depend.tmp; \ fi depend rm depend.tmp config.status: @echo "You must configure gdb. Look at the README file for details." @false # These are not generated by "make depend" because they only are there # for some machines. # But these rules don't do what we want; we want to hack the foo.o: tm.h # dependency to do the right thing. tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h: tm-68k.h tm-hp300hpux.h tm-sun2.h tm-3b1.h: tm-68k.h xm-news1000.h: xm-news.h xm-i386-sv32.h: xm-i386.h tm-i386gas.h: tm-i386.h xm-sun4os4.h: xm-sparc.h tm-sun4os4.h: tm-sparc.h kdb: $(NTSSTART) $(OBS) $(NTSOBS) ${ADD_DEPS} ${CDEPS} rm -f init.c $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(NTSOBS) > init.c $(CC) $(LDFLAGS) -c init.c $(CLIBS) ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o $(ADD_FILES) \ -lc $(CLIBS) # Put the proper machine-specific files first. # createtags will edit the .o in DEPFILES into .c TAGS: ${TAGFILES} $(srcdir)/createtags $(TM_FILE) ${XM_FILE} $(DEPFILES) ${TAGFILES} tags: TAGS # Making distributions of GDB and friends. # Make a directory `proto-gdb.dir' that contains an image of the GDB # directory of the distribution, built up with symlinks. make-proto-gdb.dir: force_update $(MAKE) $(MFLAGS) -f Makefile.in setup-to-dist $(MAKE) $(MFLAGS) -f Makefile make-proto-gdb-1 # Make a tar file containing the GDB directory of the distribution. gdb.tar.Z: force_update $(MAKE) $(MFLAGS) -f Makefile.in setup-to-dist $(MAKE) $(MFLAGS) -f Makefile.in gdb-$(VERSION).tar.Z # Set up the GDB directory for distribution, by building all files that # are products of other files. setup-to-dist: force_update ../configure none rm -f alldeps.mak $(MAKE) $(MFLAGS) alldeps.mak ../configure none rm -f depend $(MAKE) $(MFLAGS) depend ../configure none (cd doc; $(MAKE) $(MFLAGS) gdbVN.m4) $(MAKE) $(MFLAGS) gdb.info $(MAKE) $(MFLAGS) refcard.ps # Build a tar file from a proto-gdb.dir. gdb-$(VERSION).tar.Z: force_update rm -f gdb.tar gdb-$(VERSION).tar.Z $(MAKE) $(MFLAGS) -f Makefile make-proto-gdb-1 ln -s proto-gdb.dir $(DIST) tar chf - $(DIST) | compress >gdb-$(VERSION).tar.Z rm -rf $(DIST) proto-gdb.dir # Build a proto-gdb.dir after GDB has been set up for distribution. # This stuff must be run in `Makefile', not `Makefile.in`; we use the makefile # built in the setup-to-dist process, since it defines things like ALLCONFIG # and ALLDEPFILES, that we need. make-proto-gdb-1: ${TARFILES} ${TARDIRS} gdb.info rm -rf proto-gdb.dir mkdir proto-gdb.dir cd proto-gdb.dir ; for i in ${TARFILES} ; do ln -s ../$$i . ; done cd proto-gdb.dir ; ln -s ../${INFOFILES} . cd proto-gdb.dir ; for i in ${TARDIRS}; do \ (mkdir $$i; cd $$i; \ ln -s ../../$$i/* .; \ rm -rf SCCS CVS.adm RCS config.status); done mkdir proto-gdb.dir/config cd proto-gdb.dir/config ; \ for i in $(ALLCONFIG) ; do ln -s ../../$$i ../$$i ; done mkdir proto-gdb.dir/vx-share proto-gdb.dir/nindy-share cd proto-gdb.dir/config ; \ for i in $(SFILES_SUBDIR) $(NONSRC_SUBDIR) $(ALLDEPFILES_SUBDIR); \ do ln -s ../../$$i ../$$i ; done chmod og=u `find . -print` clean: rm -f ${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} rm -f init.c init.o version.c rm -f gdb core gdb.tar gdb.tar.Z make.log rm -f gdb[0-9] $(MAKE) subdir_do DO=clean "DODIRS=$(SUBDIRS)" distclean: clean c-exp.tab.c m2-exp.tab.c TAGS rm -f tm.h xm.h config.status rm -f y.output yacc.acts yacc.tmp rm -f ${TESTS} Makefile depend $(MAKE) subdir_do DO=distclean "DODIRS=$(SUBDIRS)" realclean: clean rm -f c-exp.tab.c m2-exp.tab.c TAGS rm -f tm.h xm.h config.status rm -f Makefile depend $(MAKE) subdir_do DO=realclean "DODIRS=$(SUBDIRS)" STAGESTUFF=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb subdir_do: force for i in $(DODIRS); do \ if [ -d $(unsubdir)/$$i ] ; then \ if (cd $(unsubdir)/$$i$(subdir); \ $(MAKE) \ "against=$(against)" \ "AR=$(AR)" \ "AR_FLAGS=$(AR_FLAGS)" \ "CC=$(CC)" \ "RANLIB=$(RANLIB)" \ "BISON=$(BISON)" $(DO)) ; then true ; \ else exit 1 ; fi ; \ else true ; fi ; \ done # Copy the object files from a particular stage into a subdirectory. stage1: force -mkdir stage1 -mv -f $(STAGESTUFF) stage1 $(MAKE) subdir_do DO=stage1 "DODIRS=$(SUBDIRS)" stage2: force -mkdir stage2 -mv -f $(STAGESTUFF) stage2 $(MAKE) subdir_do DO=stage2 "DODIRS=$(SUBDIRS)" stage3: force -mkdir stage3 -mv -f $(STAGESTUFF) stage3 $(MAKE) subdir_do DO=stage3 "DODIRS=$(SUBDIRS)" against=stage2 comparison: force for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done $(MAKE) subdir_do DO=comparison "DODIRS=$(SUBDIRS)" de-stage1: force -(cd stage1 ; mv -f * ..) -rmdir stage1 $(MAKE) subdir_do DO=de-stage1 "DODIRS=$(SUBDIRS)" de-stage2: force -(cd stage2 ; mv -f * ..) -rmdir stage2 $(MAKE) subdir_do DO=de-stage2 "DODIRS=$(SUBDIRS)" de-stage3: force -(cd stage3 ; mv -f * ..) -rmdir stage3 $(MAKE) subdir_do DO=de-stage3 "DODIRS=$(SUBDIRS)" Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag) $(SHELL) ./config.status force: # Documentation! # GDB QUICK REFERENCE (TeX dvi file, CM fonts) refcard.dvi: $(srcdir)/doc/refcard.tex ( cd $(unsubdir)/doc; $(MAKE) refcard.dvi ) mv $(unsubdir)/doc/refcard.dvi . # GDB QUICK REFERENCE (PostScript output, common PS fonts) refcard.ps: $(srcdir)/doc/refcard.tex ( cd $(unsubdir)/doc; $(MAKE) refcard.ps ) mv $(unsubdir)/doc/refcard.ps . # GDB MANUAL: TeX dvi file gdb.dvi: $(unsubdir)/doc/gdb-all.texi ( cd $(unsubdir)/doc; $(MAKE) M4=$(M4) gdb.dvi ) mv $(unsubdir)/doc/gdb.dvi . # GDB MANUAL: info file gdb.info: $(unsubdir)/doc/gdb-all.texi ( cd $(unsubdir)/doc; $(MAKE) M4=$(M4) gdb.info ) mv $(unsubdir)/doc/gdb.info* . $(unsubdir)/doc/gdb-all.texi: (cd $(srcdir)/doc; $(MAKE) M4=$(M4) gdb-all.texi) # Make copying.c from COPYING copying.c: ${srcdir}/COPYING ${srcdir}/copying.awk awk -f ${srcdir}/copying.awk < ${srcdir}/COPYING > copying.c version.c: Makefile.in echo 'char *version = "$(VERSION)";' >version.c # c-exp.tab.c is generated in target dir from c-exp.y if it doesn't exist # in srcdir, then compiled in target dir to c-exp.tab.o. c-exp.tab.o: c-exp.tab.c c-exp.tab.c: $(srcdir)/c-exp.y @echo 'Expect 4 shift/reduce conflicts.' ${YACC} $(srcdir)/c-exp.y -mv y.tab.c c-exp.tab.c # m2-exp.tab.c is generated in target dir from m2-exp.y if it doesn't exist # in srcdir, then compiled in target dir to m2-exp.tab.o. m2-exp.tab.o: m2-exp.tab.c m2-exp.tab.c: $(srcdir)/m2-exp.y ${YACC} $(srcdir)/m2-exp.y -mv y.tab.c m2-exp.tab.c # The symbol-file readers have dependencies on BFD header files. dbxread.o: ${srcdir}/dbxread.c ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/dbxread.c coffread.o: ${srcdir}/coffread.c ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/coffread.c mipsread.o: ${srcdir}/mipsread.c ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/mipsread.c elfread.o: ${srcdir}/elfread.c ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/elfread.c xcoffread.o: ${srcdir}/xcoffread.c ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/xcoffread.c xcoffexec.o: ${srcdir}/xcoffexec.c ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/xcoffexec.c # Drag in the files that are in another directory. xdr_ld.o: ${srcdir}/vx-share/xdr_ld.c ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_ld.c xdr_ptrace.o: ${srcdir}/vx-share/xdr_ptrace.c ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_ptrace.c xdr_rdb.o: ${srcdir}/vx-share/xdr_rdb.c ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_rdb.c xdr_regs.o: ${srcdir}/vx-share/xdr_regs.c ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_regs.c nindy.o: ${srcdir}/nindy-share/nindy.c ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/nindy.c Onindy.o: ${srcdir}/nindy-share/Onindy.c ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/Onindy.c ttybreak.o: ${srcdir}/nindy-share/ttybreak.c ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/ttybreak.c ttyflush.o: ${srcdir}/nindy-share/ttyflush.c ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/ttyflush.c lint: $(LINTFILES) $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \ `echo ${DEPFILES} | sed 's/\.o /\.c /g' gdb.cxref: $(SFILES) cxref -I. $(SFILES) >gdb.cxref force_update: # When used with GDB, the demangler should never look for leading # underscores because GDB strips them off during symbol read-in. Thus # -Dnounderscore. cplus-dem.o: cplus-dem.c ${CC} -c ${CFLAGS} -Dnounderscore \ `echo ${srcdir}/cplus-dem.c | sed 's,^\./,,'` # GNU Make has an annoying habit of putting *all* the Makefile variables # into the environment, unless you include this target as a circumvention. # Rumor is that this will be fixed (and this target can be removed) # in GNU Make 4.0. .NOEXPORT: # This is the end of "Makefile.in". When built into "Makefile" # by the configure script, two things are added below this point: # alldeps.mak -- defintions of all files that are used in # host- or target-dependent configurations # depend -- what .o files depend on what .c and .h files, # for all configurations.