2014-03-20 Pedro Alves PR breakpoints/7143 * breakpoint.c (should_be_inserted): Don't insert breakpoints that are being stepped over. (breakpoint_address_match): Make extern. * breakpoint.h (breakpoint_address_match): New declaration. * inferior.h (stepping_past_instruction_at): New declaration. * infrun.c (struct step_over_info): New type. (step_over_info): New global. (set_step_over_info, clear_step_over_info) (stepping_past_instruction_at): New functions. (handle_inferior_event): Clear the step-over info when trap_expected is cleared. (resume): Remove now stale comment. (clear_proceed_status): Clear step-over info. (proceed): Adjust step-over handling to set or clear the step-over info instead of removing all breakpoints. (handle_signal_stop): When setting up a thread-hop, don't remove breakpoints here. (stop_stepping): Clear step-over info. (keep_going): Adjust step-over handling to set or clear step-over info and then always inserting breakpoints, instead of removing all breakpoints when stepping over one. 2014-03-20 Pedro Alves * infrun.c (previous_inferior_ptid): Adjust comment. (deferred_step_ptid): Delete. (infrun_thread_ptid_changed, prepare_to_proceed) (init_wait_for_inferior): Adjust. (handle_signal_stop): Delete deferred_step_ptid handling. 2014-03-18 Jan Kratochvil PR gdb/15358 * defs.h (sync_quit_force_run): New declaration. (QUIT): Check also SYNC_QUIT_FORCE_RUN. * event-top.c (async_sigterm_handler): New declaration. (async_sigterm_token): New variable. (async_init_signals): Create also async_sigterm_token. (async_sigterm_handler): New function. (sync_quit_force_run): New variable. (handle_sigterm): Replace quit_force call by other calls. * utils.c (quit): Call quit_force if SYNC_QUIT_FORCE_RUN. 2014-03-18 Maciej W. Rozycki * rs6000-tdep.c (rs6000_frame_cache): Correct little-endian GPR offset into SPE pseudo registers. 2014-03-18 Pedro Alves PR gdb/13860 * inferior.h (print_stop_event): Declare. * infrun.c (print_stop_event): New, factored out from ... (normal_stop): ... this. * mi/mi-interp.c (mi_on_normal_stop): Use print_stop_event instead of bpstat_print/print_stack_frame. 2014-03-17 Tom Tromey * ui-out.c (clear_table, ui_out_new): Clear uiout->table.id. 2014-03-17 Pierre-Marie de Rodat * ada-lang.c (decode_constrained_packed_array): Perform a minimal coercion for reference with coerce_ref instead of ada_coerce_ref. 2014-03-17 Tristan Gingold * solib-darwin.c (DYLD_VERSION_MAX): Increase value. (darwin_solib_create_inferior_hook): Emit a warning if version is unhandled. 2014-03-16 Ulrich Weigand  * python/py-value.c (get_field_flag): Cast flag_name argument to PyObject_GetAttrString to support Python 2.4. 2014-03-14 Jan Kratochvil * MAINTAINERS (The Official FSF-appointed GDB Maintainers) (Global Maintainers): Remove Jan Kratochvil. 2014-03-14 Pedro Alves * inferior.h (terminal_ours_for_output): Rename to ... (child_terminal_ours_for_output): ... this. (terminal_save_ours): Rename to ... (child_terminal_save_ours): ... this. (terminal_ours): Rename to ... (child_terminal_ours): ... this. (terminal_inferior): Rename to ... (child_terminal_inferior): ... this. (terminal_init_inferior): Rename to ... (child_terminal_init_inferior): ... this. (terminal_init_inferior_with_pgrp): Rename to ... (child_terminal_init_inferior_with_pgrp): ... this. * inflow.c (terminal_init_inferior_with_pgrp): Rename to ... (child_terminal_init_with_pgrp): ... this. (terminal_save_ours): Rename to ... (child_terminal_save_ours): ... this. (terminal_init_inferior): Rename to ... (child_terminal_init): ... this. Adjust. (terminal_inferior): Rename to ... (child_terminal_inferior): ... this. (terminal_ours_for_output): Rename to ... (child_terminal_ours_for_output): ... this. Adjust. (terminal_ours): Rename to ... (child_terminal_ours): ... this. (terminal_ours_1): Rename to ... (child_terminal_ours_1): ... this. Adjust. * linux-nat.c (linux_nat_terminal_inferior): Adjust. * windows-nat.c (do_initial_windows_stuff): Adjust. * gnu-nat.c (gnu_terminal_init_inferior): Rename to ... (gnu_terminal_init): ... this. Adjust. (gnu_target): Adjust. * inf-child.c (inf_child_target): Adjust. 2014-03-13 Doug Evans PR guile/16612 * guile/scm-type.c (tyscm_copy_type_recursive): Move type to its new eq?-hashtab. 2014-03-13 Doug Evans * value.c (record_latest_value): Call release_value_or_incref instead of release_value. 2014-03-13 Pedro Alves * procfs.c (procfs_target): Don't override to_shortname, to_longname or to_doc. 2014-03-13 Pedro Alves * inf-child.c (inf_child_open, inf_child_target): Don't mention Unix in user visible strings. 2014-03-12 Stan Shebs * gdbtypes.h: Annotate comments for Doxygen, add a page block comment with some general info. 2014-03-12 Pedro Alves * infcmd.c (prepare_execution_command): New function, factored out from several execution commands. (run_command_1, continue_command, step_1, jump_command) (signal_command, until_command, advance_command, finish_command) (attach_command): Use prepare_execution_command. 2014-03-12 Omair Javaid * arm-linux-nat.c (arm_linux_get_hwbp_cap): Updated. (MAX_BPTS): Define. (MAX_WPTS): Define. (struct arm_linux_thread_points): Removed. (struct arm_linux_process_info): New. (DEF_VEC_P (arm_linux_thread_points_p)): Removed. (VEC(arm_linux_thread_points_p) *arm_threads): Removed. (arm_linux_find_breakpoints_by_tid): Removed. (struct arch_lwp_info): New. (arm_linux_find_process_pid): New functions. (arm_linux_add_process): New functions. (arm_linux_process_info_get): New functions. (arm_linux_forget_process): New function. (arm_linux_get_debug_reg_state): New function. (struct update_registers_data): New. (update_registers_callback): New function. (arm_linux_insert_hw_breakpoint1): Updated. (arm_linux_remove_hw_breakpoint1): Updated. (arm_linux_insert_hw_breakpoint): Updated. (arm_linux_remove_hw_breakpoint): Updated. (arm_linux_insert_watchpoint): Updated. (arm_linux_remove_watchpoint): Updated. (arm_linux_new_thread): Updated. (arm_linux_prepare_to_resume): New function. (arm_linux_new_fork): New function. (_initialize_arm_linux_nat): Updated. 2014-03-12 Pedro Alves * Makefile.in (TARGET_FLAGS_TO_PASS): Add TESTS. 2014-03-12 Tom Tromey * inf-child.c (return_zero): New function. (inf_child_target): Set to_can_async_p, to_supports_non_stop. * aix-thread.c (aix_thread_inferior_created): New function. (aix_thread_attach): Remove. (init_aix_thread_ops): Don't set to_attach. (_initialize_aix_thread): Register inferior_created observer. * corelow.c (init_core_ops): Don't set to_attach or to_create_inferior. * exec.c (init_exec_ops): Don't set to_attach or to_create_inferior. * infcmd.c (run_command_1): Use find_run_target. Make direct target calls. (attach_command): Use find_attach_target. Make direct target calls. * record-btrace.c (init_record_btrace_ops): Don't set to_create_inferior. * record-full.c (record_full_can_async_p, record_full_is_async_p): Remove. (init_record_full_ops, init_record_full_core_ops): Update. Don't set to_create_inferior. * target.c (complete_target_initialization): Add assertion. (target_create_inferior): Remove. (find_default_attach, find_default_create_inferior): Remove. (find_attach_target, find_run_target): New functions. (find_default_is_async_p, find_default_can_async_p) (target_supports_non_stop, target_attach): Remove. (init_dummy_target): Don't set to_create_inferior or to_supports_non_stop. * target.h (struct target_ops) : Add comment. Remove TARGET_DEFAULT_FUNC. : Add comment. : Use TARGET_DEFAULT_RETURN. : Add comments. (find_attach_target, find_run_target): Declare. (target_create_inferior): Remove. (target_has_execution_1): Update comment. (target_supports_non_stop): Remove. * target-delegates.c: Rebuild. 2014-03-12 Pedro Alves * inf-child.h: Update comment to not mention Unix. 2014-03-12 Pedro Alves * inf-child.c: Update top comment to not mention Unix. Add generic comment describing how this target is meant to be used. (inf_child_post_attach, inf_child_post_startup_inferior) (inf_child_follow_fork, inf_child_pid_to_exec_file): Don't mention Unix in comment. 2014-03-12 Pedro Alves * nto-procfs.c: Include inf-child.h. (procfs_ops): Delete global. (procfs_can_run): Delete method. (procfs_detach, procfs_mourn_inferior): Unpush the passed in target pointer instead of referencing procfs_ops. (procfs_prepare_to_store): Delete. (init_procfs_ops): Delete function. (procfs_target): New function, based on init_procfs_ops, but inherit inf_child_target. (_initialize_procfs): Use procfs_target. 2014-03-12 Pedro Alves * windows-nat.c: Include inf-child.h. (windows_ops): Delete global. (windows_open, windows_prepare_to_store, windows_can_run): Delete methods. (init_windows_ops): Delete function. (windows_target): New function, based on init_windows_ops, but inherit inf_child_target. (_initialize_windows_nat): Use windows_target. Install x86 specific target methods here. 2014-03-10 Doug Evans * guile/guile.c (call_initialize_gdb_module): New function. (initialize_guile): Replace call to scm_init_guile with call to scm_with_guile. 2014-03-10 Joel Brobecker * ada-lang.c (ada_evaluate_subexp): Add missing space before '(' in call to TYPE_CODE macro. 2014-03-10 Jerome Guitton * ada-lang.c (ada_evaluate_subexp) : Resolve tagged types to full view. 2014-03-10 Hui Zhu * target.h (target_insert_breakpoint): Remove "hardware" from its comments. 2014-03-07 Doug Evans * dwarf2read.c (read_str_index): Rename local dwo_name to objf_name. 2014-03-07 Doug Evans * dwarf2read.c (read_cutu_die_from_dwo): Fix function comment. Remove unused local comp_dir_attr. Assert exactly one of stub_comp_unit_die, stub_comp_dir is non-NULL. 2014-03-07 Joel Brobecker * target.h (complete_target_initialization, add_target): Add comment. 2014-03-07 Pedro Alves * go32-nat.c: Include inf-child.h. (go32_ops): Delete global. (go32_close, go32_detach, go32_prepare_to_store, go32_can_run): Delete methods. (go32_create_inferior): Push the passed in target pointer instead of referencing go32_ops. (init_go32_ops): Delete function. Moved parts to _initialize_go32_nat. (go32_target): New function, based on init_go32_ops, but inherit inf_child_target. (_initialize_go32_nat): Use go32_target. Move parts of init_go32_ops here. 2014-03-06 Joel Brobecker * sol-thread.c: #include "symtab.h", "minsym.h" and "objfiles.h". (ps_pglobal_lookup): Use BMSYMBOL_VALUE_ADDRESS instead of SYMBOL_VALUE_ADDRESS. (info_cb): MSYMBOL_PRINT_NAME instead of SYMBOL_PRINT_NAME. 2014-03-06 Yao Qi * breakpoint.c (get_tracepoint_by_number): Remove argument optional_p. All callers updated. Adjust comments. Update output message. * breakpoint.h (get_tracepoint_by_number): Update declaration. 2014-03-06 Yao Qi * reverse.c (goto_bookmark_command): Add local 'p'. Emit error early if get_number returns zero. Use 'p' instead of 'args'. 2014-03-06 Yao Qi * cli/cli-utils.c (get_number_trailer): Add '\n' at the end of message. 2014-03-06 Yao Qi PR breakpoints/16508 * tracepoint.c (check_trace_running): New function. (trace_find_command): Move code to check_trace_running and call check_trace_running. (trace_find_pc_command): Likewise. (trace_find_tracepoint_command): Likewise. (trace_find_line_command): Likewise. (trace_find_range_command): Likewise. * tracepoint.h (check_trace_running): Likewise. * mi/mi-main.c (mi_cmd_trace_find): Call check_trace_running. 2014-03-06 Yao Qi * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN (tcomplain ()). * target-delegates.c: Regenerated. 2014-03-05 Pedro Alves PR gdb/16575 * dcache.c (dcache_poke_byte): Constify ptr parameter. Return void. Update comment. (dcache_xfer_memory): Delete. (dcache_read_memory_partial): New, based on the read bits of dcache_xfer_memory. (dcache_update): Add status parameter. Use ULONGEST for len, and adjust. Discard cache lines if the reason for the update was error. * dcache.h (dcache_xfer_memory): Delete declaration. (dcache_read_memory_partial): New declaration. (dcache_update): Update prototype. * target.c (raw_memory_xfer_partial): Update the dcache here. (memory_xfer_partial_1): Don't handle dcache writes here. 2014-03-05 Mike Frysinger * remote-sim.c (gdbsim_load): Add const to prog. 2014-03-03 Tom Tromey * elfread.c (probe_key): Change to bfd_data. (elf_get_probes, probe_key_free, _initialize_elfread): Probes are now per-BFD, not per-objfile. * stap-probe.c (stap_probe_destroy): Update comment. (handle_stap_probe): Allocate on the per-BFD obstack. 2014-03-03 Tom Tromey * break-catch-throw.c (fetch_probe_arguments): Use bound probes. * breakpoint.c (create_longjmp_master_breakpoint): Use get_probe_address. (add_location_to_breakpoint, bkpt_probe_insert_location) (bkpt_probe_remove_location): Update. * breakpoint.h (struct bp_location) : Now a bound_probe. * elfread.c (elf_symfile_relocate_probe): Remove. (elf_probe_fns): Update. (insert_exception_resume_breakpoint): Change type of "probe" parameter to bound_probe. (check_exception_resume): Update. * objfiles.c (objfile_relocate1): Don't relocate probes. * probe.c (bound_probe_s): New typedef. (parse_probes): Use get_probe_address. Set sal's objfile. (find_probe_by_pc): Return a bound_probe. (collect_probes): Return a VEC(bound_probe_s). (compare_probes): Update. (gen_ui_out_table_header_info): Change type of "probes" parameter. Update. (info_probes_for_ops): Update. (get_probe_address): New function. (probe_safe_evaluate_at_pc): Update. * probe.h (struct probe_ops) : New field. : Add objfile parameter. (struct probe) : Remove field. : New field.
: Update comment. (struct bound_probe): New. (find_probe_by_pc): Return a bound_probe. (get_probe_address): Declare. * solib-svr4.c (struct probe_and_action)
: New field. (hash_probe_and_action, equal_probe_and_action): Update. (register_solib_event_probe): Add address parameter. (solib_event_probe_at): Update. (svr4_create_probe_breakpoints): Add objfile parameter. Use get_probe_address. * stap-probe.c (struct stap_probe) : Update comment. (stap_get_probe_address): New function. (stap_can_evaluate_probe_arguments, compute_probe_arg) (compile_probe_arg): Update. (stap_set_semaphore, stap_clear_semaphore): Compute semaphore's address. (handle_stap_probe): Don't relocate the probe. (stap_relocate): Remove. (stap_gen_info_probes_table_values): Update. (stap_probe_ops): Remove stap_relocate. * symfile-debug.c (debug_sym_relocate_probe): Remove. (debug_sym_probe_fns): Update. * symfile.h (struct sym_probe_fns) : Remove. * symtab.c (init_sal): Use memset. * symtab.h (struct symtab_and_line) : New field. * tracepoint.c (start_tracing, stop_tracing): Update. 2014-03-03 Tom Tromey * probe.h (parse_probes, find_probe_by_pc) (find_probes_in_objfile): Fix comments. 2014-03-02 Doug Evans * infrun.c (handle_signal_stop): Replace test for TARGET_WAITKIND_STOPPED with an assert. 2014-03-02 Doug Evans * guile/scm-objfile.c (ofscm_mark_objfile_smob): Fix typo in comment. 2014-03-02 Doug Evans * guile/lib/gdb/printing.scm (append-pretty-printer!): Fix thinko. 2014-03-01 Mark Kettenis * obsd-nat.c: Include "gdb_wait.h" instead of . 2014-03-01 Mark Kettenis * i386obsd-nat.c: Include "obsd-nat.h". (_initialize_i386obsd_nat): Call obsd_add_target instead of add_target. * config/i386/obsd.mh (NATDEPFILES): Add obsd-nat.o. 2014-03-01 Mark Kettenis * i386obsd-nat.c (i386obsd_supply_pcb): Cast 'sf' to 'gdb_byte *'. 2014-03-01 Mark Kettenis * mips64obsd-nat.c: Include "obsd-nath". (_initialize_mips64obsd_nat): Call obsd_add_target instead of add_target * config/mips/obsd64.mh (NATDEPFILES): Add obsd-nat.o. 2014-03-01 Mark Kettenis * amd64obsd-nat.c: Include "obsd-nat,h. (_initialize_amd64obsd_nat): Call obsd_add_target instead of add_target. * config/i386/obsd64.mh (NATDEPFILES): Add obsd-nat.o. 2014-02-28 Siva Chandra Reddy * valops.c (find_oload_champ): Remove unneccesary argument METHOD. (find_overload_match): Update call to find_oload_champ. (find_oload_champ_namespace_loop): Likewise 2014-02-28 Mark Kettenis * Makefile.in (ALLDEPFILES): Add sparc64obsd-nat.c. * configure.host (sparc64-*-openbsd*): Set gdb_host to obsd64. * config/sparc/obsd64.mh: New file. * sparc64obsd-nat.c: New file. * obsd-nat.h: New file. * obsd-nat.c: New file. * Makefile.in (HFILES_NO_SRCDIR): Add obsd-nat.h. (ALLDEPFILES): Add obsd-nat.c. 2014-02-28 Tom Tromey * cli-out.c (cli_ui_out_impl): Now const. Remove comment. * cli-out.h (cli_ui_out_impl): Now const. * mi/mi-out.c (mi_ui_out_impl): Now const. Remove comment. * ui-out.c (struct ui_out) : Now const. (default_ui_out_impl): Now const. (ui_out_new): Make 'impl' parameter const. * ui-out.h (ui_out_new): Update. 2014-02-27 Mark Kettenis * solib-svr4.c (svr4_read_so_list): Initialize first_l_name to 0. 2014-02-27 Mark Kettenis * sparc-nat.c (sparc_xfer_wcookie): Always use process ID. 2014-02-27 Jan Kratochvil Additional PR 8882 fix. * solib-svr4.c (svr4_read_so_list): Change first to first_l_name. 2014-02-27 Pedro Alves * nat/linux-waitpid.c (my_waitpid): Only block signals if WNOHANG isn't set. 2014-02-27 Pedro Alves PR 12702 * linux-nat.c (status_to_str): Moved to nat/linux-waitpid.c. * nat/linux-waitpid.c: Include string.h. (status_to_str): Moved here and made extern. * nat/linux-waitpid.h (status_to_str): New declaration. 2014-02-27 Hui Zhu PR 12702 * infrun.c (ptid_match): Move ... * common/ptid.c (ptid_match): ... here. * inferior.h (ptid_match): Move ... * common/ptid.h (ptid_match): ... here. 2014-02-27 Mark Kettenis * mips64obsd-tdep.c (mips64obsd_init_abi): Call obsd_init_abi. * configure.tgt (mips64*-*-openbsd*): Add obsd-tdep.c to gdb_target_obs. 2014-02-27 Mark Kettenis * obsd-tdep.c (obsd_auxv_parse): New function. (obsd_init_abi): Set auxv_parse. * gdbarch.sh (auxv_parse): New. * gdbarch.h: Regenerated. * gdbarch.c: Regenerated. * auxv.c (target_auxv_parse): Call gdbarch_parse_auxv if provided. 2014-02-26 Ludovic Courtès * guile/scm-value.c (gdbscm_history_append_x): New function. (value_functions): Add it. 2014-02-27 Joel Brobecker * dwarf2read.c (attr_value_as_address): New function. (dwarf2_find_base_address, read_call_site_scope): Use attr_value_as_address in place of DW_ADDR. (dwarf2_get_pc_bounds): Use attr_value_as_address to get the low and high addresses. Slight rework of the handling of the high pc being a constant form, and limit it to DWARF verson 4 or higher. (dwarf2_record_block_ranges): Likewise. (read_partial_die): Likewise. (new_symbol_full): Use attr_value_as_address in place of DW_ADDR. 2014-02-26 Tom Tromey * exec.c (exec_file_attach): Hold a reference to exec_bfd. 2014-02-26 Tom Tromey * elfread.c (elf_read_minimal_symbols): Return early if minimal symbols have already been read. Add "ei" parameter. (elf_symfile_read): Call elf_read_minimal_symbols earlier. * minsyms.c (prim_record_minimal_symbol_full): Update. * objfiles.h (struct objstats) : Move... (struct objfile_per_bfd_storage) : ... here. * symmisc.c (print_objfile_statistics): Update. 2014-02-26 Tom Tromey * elfread.c (elf_read_minimal_symbols): New function, from elf_symfile_read. (elf_symfile_read): Call it. 2014-02-26 Tom Tromey * minsyms.c (lookup_minimal_symbol, iterate_over_minimal_symbols) (lookup_minimal_symbol_text, lookup_minimal_symbol_by_pc_name) (lookup_minimal_symbol_solib_trampoline) (lookup_minimal_symbol_by_pc_section_1) (lookup_minimal_symbol_and_objfile): Update. (prim_record_minimal_symbol_full): Use the per-BFD obstack. Don't allocate a minimal symbol if minsyms have already been read. (build_minimal_symbol_hash_tables): Update. (install_minimal_symbols): Do nothing if minsyms already read. Use the per-BFD obstack. (terminate_minimal_symbol_table): Use the per-BFD obstack. * objfiles.c (allocate_objfile): Call terminate_minimal_symbol_table later. (have_minimal_symbols): Update. * objfiles.h (struct objfile_per_bfd_storage) : Move from struct objfile. : New field. (struct objfile) : Move. (ALL_OBJFILE_MSYMBOLS): Update. * symfile.c (read_symbols): Set minsyms_read. (reread_symbols): Update. * symmisc.c (dump_objfile, dump_msymbols): Update. 2014-02-26 Tom Tromey * minsyms.c (msymbols_sort): Remove. * minsyms.h (msymbols_sort): Remove. * objfiles.c (objfile_relocate1): Don't relocate minsyms. * symtab.h (MSYMBOL_VALUE_ADDRESS): Use objfile offsets. * elfread.c (elf_symtab_read): Don't add section offsets. * xcoffread.c (record_minimal_symbol): Don't add section offset to minimal symbol address. * somread.c (text_offset, data_offset): Remove. (som_symtab_read): Don't add section offsets to minimal symbol addresses. * coff-pe-read.c (add_pe_forwarded_sym, read_pe_exported_syms): Don't add section offsets to minimal symbols. * coffread.c (coff_symtab_read): Don't add section offsets to minimal symbol addresses. * machoread.c (macho_symtab_add_minsym): Don't add section offset to minimal symbol addresses. * mipsread.c (read_alphacoff_dynamic_symtab): Don't add section offset to minimal symbol addresses. * mdebugread.c (parse_partial_symbols): Don't add section offset to minimal symbol addresses. * dbxread.c (read_dbx_dynamic_symtab): Don't add section offset to minimal symbol addresses. 2014-02-26 Tom Tromey * ada-lang.c (ada_main_name): Update. (ada_add_standard_exceptions): Update. * ada-tasks.c (ada_tasks_inferior_data_sniffer): Update. * aix-thread.c (pdc_symbol_addrs, pd_enable): Update. * arm-tdep.c (skip_prologue_function, arm_skip_stub): Update. * auxv.c (ld_so_xfer_auxv): Update. * avr-tdep.c (avr_scan_prologue): Update. * ax-gdb.c (gen_var_ref): Update. * blockframe.c (get_pc_function_start) (find_pc_partial_function_gnu_ifunc): Update. * breakpoint.c (create_overlay_event_breakpoint) (create_longjmp_master_breakpoint) (create_std_terminate_master_breakpoint) (create_exception_master_breakpoint): Update. * bsd-uthread.c (bsd_uthread_lookup_address): Update. * c-valprint.c (c_val_print): Update. * coff-pe-read.c (add_pe_forwarded_sym): Update. * common/agent.c (agent_look_up_symbols): Update. * dbxread.c (find_stab_function_addr, end_psymtab): Update. * dwarf2loc.c (call_site_to_target_addr): Update. * dwarf2read.c (dw2_find_pc_sect_symtab): Update. * elfread.c (elf_gnu_ifunc_record_cache) (elf_gnu_ifunc_resolve_by_got): Update. * findvar.c (default_read_var_value): Update. * frame.c (inside_main_func): Update. * frv-tdep.c (frv_frame_this_id): Update. * glibc-tdep.c (glibc_skip_solib_resolver): Update. * gnu-v3-abi.c (gnuv3_get_typeid, gnuv3_skip_trampoline): Update. * hppa-hpux-tdep.c (hppa64_hpux_search_dummy_call_sequence) (hppa_hpux_find_dummy_bpaddr): Update. * hppa-tdep.c (hppa_symbol_address): Update. * infcmd.c (until_next_command): Update. * jit.c (jit_read_descriptor, jit_breakpoint_re_set_internal): Update. * linespec.c (minsym_found, add_minsym): Update. * linux-nat.c (get_signo): Update. * linux-thread-db.c (inferior_has_bug): Update. * m32c-tdep.c (m32c_return_value) (m32c_m16c_address_to_pointer): Update. * m32r-tdep.c (m32r_frame_this_id): Update. * m68hc11-tdep.c (m68hc11_get_register_info): Update. * machoread.c (macho_resolve_oso_sym_with_minsym): Update. * maint.c (maintenance_translate_address): Update. * minsyms.c (lookup_minimal_symbol_by_pc_name): Update. (frob_address): New function. (lookup_minimal_symbol_by_pc_section_1): Use raw addresses, frob_address. Rename parameter to "pc_in". (compare_minimal_symbols, compact_minimal_symbols): Use raw addresses. (find_solib_trampoline_target, minimal_symbol_upper_bound): Update. * mips-linux-tdep.c (mips_linux_skip_resolver): Update. * mips-tdep.c (mips_skip_pic_trampoline_code): Update. * objc-lang.c (find_objc_msgsend): Update. * objfiles.c (objfile_relocate1): Update. * obsd-tdep.c (obsd_skip_solib_resolver): Update. * p-valprint.c (pascal_val_print): Update. * parse.c (write_exp_msymbol): Update. * ppc-linux-tdep.c (ppc_linux_spe_context_lookup) (ppc_elfv2_skip_entrypoint): Update. * ppc-sysv-tdep.c (convert_code_addr_to_desc_addr): Update. * printcmd.c (build_address_symbolic, msym_info) (address_info): Update. * proc-service.c (ps_pglobal_lookup): Update. * psymtab.c (find_pc_sect_psymtab_closer) (find_pc_sect_psymtab, find_pc_sect_symtab_from_partial): Change msymbol parameter to bound_minimal_symbol. * ravenscar-thread.c (get_running_thread_id): Update. * remote.c (remote_check_symbols): Update. * sh64-tdep.c (sh64_elf_make_msymbol_special): Use raw address. * sol2-tdep.c (sol2_skip_solib_resolver): Update. * solib-dsbt.c (lm_base): Update. * solib-frv.c (lm_base, main_got): Update. * solib-irix.c (locate_base): Update. * solib-som.c (som_solib_create_inferior_hook) (link_map_start): Update. * solib-spu.c (spu_enable_break, ocl_enable_break): Update. * solib-svr4.c (elf_locate_base, enable_break): Update. * spu-tdep.c (spu_get_overlay_table, spu_catch_start) (flush_ea_cache): Update. * stabsread.c (define_symbol, scan_file_globals): Update. * stack.c (find_frame_funname): Update. * symfile-debug.c (debug_qf_expand_symtabs_matching) (debug_qf_find_pc_sect_symtab): Update. * symfile.c (simple_read_overlay_table) (simple_overlay_update): Update. * symfile.h (struct quick_symbol_functions) : Change type of msymbol to bound_minimal_symbol. * symmisc.c (dump_msymbols): Update. * symtab.c (find_pc_sect_symtab_via_partial) (find_pc_sect_psymtab, find_pc_sect_line, skip_prologue_sal) (search_symbols, print_msymbol_info): Update. * symtab.h (MSYMBOL_VALUE_RAW_ADDRESS): New macro. (MSYMBOL_VALUE_ADDRESS): Redefine. (BMSYMBOL_VALUE_ADDRESS): New macro. * tracepoint.c (scope_info): Update. * tui/tui-disasm.c (tui_find_disassembly_address) (tui_get_begin_asm_address): Update. * valops.c (find_function_in_inferior): Update. * value.c (value_static_field, value_fn_field): Update. 2014-02-26 Tom Tromey * ada-lang.c (ada_update_initial_language): Update. (ada_main_name, ada_has_this_exception_support): Update. * ada-tasks.c (ada_tasks_inferior_data_sniffer): Update. * aix-thread.c (pdc_symbol_addrs, pd_enable): Update. * arm-tdep.c (arm_skip_stub): Update. * auxv.c (ld_so_xfer_auxv): Update. * avr-tdep.c (avr_scan_prologue): Update. * ax-gdb.c (gen_var_ref): Update. * breakpoint.c (struct breakpoint_objfile_data) : Change type to bound_minimal_symbol. (create_overlay_event_breakpoint) (create_longjmp_master_breakpoint) (create_std_terminate_master_breakpoint) (create_exception_master_breakpoint): Update. * bsd-uthread.c (bsd_uthread_lookup_address): Update. * c-exp.y (classify_name): Update. * coffread.c (coff_symfile_read): Update. * common/agent.c (agent_look_up_symbols): Update. * d-lang.c (d_main_name): Update. * dbxread.c (find_stab_function_addr, end_psymtab): Update. * dec-thread.c (enable_dec_thread): Update. * dwarf2loc.c (call_site_to_target_addr): Update. * elfread.c (elf_gnu_ifunc_resolve_by_got): Update. * eval.c (evaluate_subexp_standard): Update. * findvar.c (struct minsym_lookup_data) : Change type to bound_minimal_symbol. : Remove. (minsym_lookup_iterator_cb, default_read_var_value): Update. * frame.c (inside_main_func): Update. * frv-tdep.c (frv_frame_this_id): Update. * gcore.c (call_target_sbrk): Update. * glibc-tdep.c (glibc_skip_solib_resolver): Update. * gnu-v3-abi.c (gnuv3_get_typeid, gnuv3_skip_trampoline): Update. * go-lang.c (go_main_name): Update. * hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code) (hppa_hpux_find_import_stub_for_addr): Update. * hppa-tdep.c (hppa_extract_17, hppa_lookup_stub_minimal_symbol): Update. Change return type. * hppa-tdep.h (hppa_lookup_stub_minimal_symbol): Change return type. * jit.c (jit_breakpoint_re_set_internal): Update. * linux-fork.c (inferior_call_waitpid, checkpoint_command): Update. * linux-nat.c (get_signo): Update. * linux-thread-db.c (inferior_has_bug): Update * m32c-tdep.c (m32c_return_value) (m32c_m16c_address_to_pointer): Update. * m32r-tdep.c (m32r_frame_this_id): Update. * m68hc11-tdep.c (m68hc11_get_register_info): Update. * machoread.c (macho_resolve_oso_sym_with_minsym): Update. * minsyms.c (lookup_minimal_symbol_internal): Rename to lookup_minimal_symbol. Change return type. (lookup_minimal_symbol): Remove. (lookup_bound_minimal_symbol): Update. (lookup_minimal_symbol_text): Change return type. (lookup_minimal_symbol_solib_trampoline): Change return type. * minsyms.h (lookup_minimal_symbol, lookup_minimal_symbol_text) (lookup_minimal_symbol_solib_trampoline): Change return type. * mips-linux-tdep.c (mips_linux_skip_resolver): Update. * objc-lang.c (lookup_objc_class, lookup_child_selector) (value_nsstring, find_imps): Update. * obsd-tdep.c (obsd_skip_solib_resolver): Update. * p-lang.c (pascal_main_name): Update. * ppc-linux-tdep.c (ppc_linux_spe_context_lookup): Update. * ppc-sysv-tdep.c (convert_code_addr_to_desc_addr): Update. * proc-service.c (ps_pglobal_lookup): Update. * ravenscar-thread.c (get_running_thread_msymbol): Change return type. (has_ravenscar_runtime, get_running_thread_id): Update. * remote.c (remote_check_symbols): Update. * sol-thread.c (ps_pglobal_lookup): Update. * sol2-tdep.c (sol2_skip_solib_resolver): Update. * solib-dsbt.c (lm_base): Update. * solib-frv.c (lm_base, frv_relocate_section_addresses): Update. * solib-irix.c (locate_base): Update. * solib-som.c (som_solib_create_inferior_hook) (som_solib_desire_dynamic_linker_symbols, link_map_start): Update. * solib-spu.c (spu_enable_break): Update. * solib-svr4.c (elf_locate_base, enable_break): Update. * spu-tdep.c (spu_get_overlay_table, spu_catch_start) (flush_ea_cache): Update. * stabsread.c (define_symbol): Update. * symfile.c (simple_read_overlay_table): Update. * symtab.c (find_pc_sect_line): Update. * tracepoint.c (scope_info): Update. * tui-disasm.c (tui_get_begin_asm_address): Update. * value.c (value_static_field): Update. 2014-02-26 Tom Tromey * minsyms.c (prim_record_minimal_symbol_full): Use SET_MSYMBOL_VALUE_ADDRESS. * objfiles.c (objfile_relocate1): Use SET_MSYMBOL_VALUE_ADDRESS. * sh64-tdep.c (sh64_elf_make_msymbol_special): Use SET_MSYMBOL_VALUE_ADDRESS. * symtab.h (MSYMBOL_VALUE_ADDRESS): Expand to an rvalue. (SET_MSYMBOL_VALUE_ADDRESS): New macro. 2014-02-26 Tom Tromey * symtab.h (struct minimal_symbol) : Rename from ginfo. (MSYMBOL_VALUE, MSYMBOL_VALUE_ADDRESS, MSYMBOL_VALUE_BYTES) (MSYMBOL_BLOCK_VALUE, MSYMBOL_VALUE_CHAIN, MSYMBOL_LANGUAGE) (MSYMBOL_SECTION, MSYMBOL_OBJ_SECTION, MSYMBOL_NATURAL_NAME) (MSYMBOL_LINKAGE_NAME, MSYMBOL_PRINT_NAME, MSYMBOL_DEMANGLED_NAME) (MSYMBOL_SET_LANGUAGE, MSYMBOL_SEARCH_NAME) (MSYMBOL_MATCHES_SEARCH_NAME, MSYMBOL_SET_NAMES): New macros. * ada-lang.c (ada_main_name): Update. (ada_lookup_simple_minsym): Update. (ada_make_symbol_completion_list): Update. (ada_add_standard_exceptions): Update. * ada-tasks.c (read_atcb, ada_tasks_inferior_data_sniffer): Update. * aix-thread.c (pdc_symbol_addrs, pd_enable): Update. * amd64-windows-tdep.c (amd64_skip_main_prologue): Update. * arm-tdep.c (skip_prologue_function): Update. (arm_skip_stack_protector, arm_skip_stub): Update. * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update. (arm_wince_skip_main_prologue): Update. * auxv.c (ld_so_xfer_auxv): Update. * avr-tdep.c (avr_scan_prologue): Update. * ax-gdb.c (gen_var_ref): Update. * block.c (call_site_for_pc): Update. * blockframe.c (get_pc_function_start): Update. (find_pc_partial_function_gnu_ifunc): Update. * breakpoint.c (create_overlay_event_breakpoint): Update. (create_longjmp_master_breakpoint): Update. (create_std_terminate_master_breakpoint): Update. (create_exception_master_breakpoint): Update. (resolve_sal_pc): Update. * bsd-uthread.c (bsd_uthread_lookup_address): Update. * btrace.c (ftrace_print_function_name, ftrace_function_switched): Update. * c-valprint.c (c_val_print): Update. * coff-pe-read.c (add_pe_forwarded_sym): Update. * coffread.c (coff_symfile_read): Update. * common/agent.c (agent_look_up_symbols): Update. * dbxread.c (find_stab_function_addr): Update. (end_psymtab): Update. * dwarf2loc.c (call_site_to_target_addr): Update. (func_verify_no_selftailcall): Update. (tailcall_dump): Update. (call_site_find_chain_1): Update. (dwarf_expr_reg_to_entry_parameter): Update. * elfread.c (elf_gnu_ifunc_record_cache): Update. (elf_gnu_ifunc_resolve_by_got): Update. * f-valprint.c (info_common_command): Update. * findvar.c (read_var_value): Update. * frame.c (get_prev_frame_1): Update. (inside_main_func): Update. * frv-tdep.c (frv_skip_main_prologue): Update. (frv_frame_this_id): Update. * glibc-tdep.c (glibc_skip_solib_resolver): Update. * gnu-v2-abi.c (gnuv2_value_rtti_type): Update. * gnu-v3-abi.c (gnuv3_rtti_type): Update. (gnuv3_skip_trampoline): Update. * hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline): Update. (hppa64_hpux_in_solib_call_trampoline): Update. (hppa_hpux_skip_trampoline_code): Update. (hppa64_hpux_search_dummy_call_sequence): Update. (hppa_hpux_find_import_stub_for_addr): Update. (hppa_hpux_find_dummy_bpaddr): Update. * hppa-tdep.c (hppa_symbol_address) (hppa_lookup_stub_minimal_symbol): Update. * i386-tdep.c (i386_skip_main_prologue): Update. (i386_pe_skip_trampoline_code): Update. * ia64-tdep.c (ia64_convert_from_func_ptr_addr): Update. * infcall.c (get_function_name): Update. * infcmd.c (until_next_command): Update. * jit.c (jit_breakpoint_re_set_internal): Update. (jit_inferior_init): Update. * linespec.c (minsym_found): Update. (add_minsym): Update. * linux-fork.c (info_checkpoints_command): Update. * linux-nat.c (get_signo): Update. * linux-thread-db.c (inferior_has_bug): Update. * m32c-tdep.c (m32c_return_value): Update. (m32c_m16c_address_to_pointer): Update. (m32c_m16c_pointer_to_address): Update. * m32r-tdep.c (m32r_frame_this_id): Update. * m68hc11-tdep.c (m68hc11_get_register_info): Update. * machoread.c (macho_resolve_oso_sym_with_minsym): Update. * maint.c (maintenance_translate_address): Update. * minsyms.c (add_minsym_to_hash_table): Update. (add_minsym_to_demangled_hash_table): Update. (msymbol_objfile): Update. (lookup_minimal_symbol): Update. (iterate_over_minimal_symbols): Update. (lookup_minimal_symbol_text): Update. (lookup_minimal_symbol_by_pc_name): Update. (lookup_minimal_symbol_solib_trampoline): Update. (lookup_minimal_symbol_by_pc_section_1): Update. (lookup_minimal_symbol_and_objfile): Update. (prim_record_minimal_symbol_full): Update. (compare_minimal_symbols): Update. (compact_minimal_symbols): Update. (build_minimal_symbol_hash_tables): Update. (install_minimal_symbols): Update. (terminate_minimal_symbol_table): Update. (find_solib_trampoline_target): Update. (minimal_symbol_upper_bound): Update. * mips-linux-tdep.c (mips_linux_skip_resolver): Update. * mips-tdep.c (mips_stub_frame_sniffer): Update. (mips_skip_pic_trampoline_code): Update. * msp430-tdep.c (msp430_skip_trampoline_code): Update. * objc-lang.c (selectors_info): Update. (classes_info): Update. (find_methods): Update. (find_imps): Update. (find_objc_msgsend): Update. * objfiles.c (objfile_relocate1): Update. * objfiles.h (ALL_OBJFILE_MSYMBOLS): Update. * obsd-tdep.c (obsd_skip_solib_resolver): Update. * p-valprint.c (pascal_val_print): Update. * parse.c (write_exp_msymbol): Update. * ppc-linux-tdep.c (powerpc_linux_in_dynsym_resolve_code) (ppc_linux_spe_context_lookup, ppc_elfv2_skip_entrypoint): Update. * ppc-sysv-tdep.c (convert_code_addr_to_desc_addr): Update. * printcmd.c (build_address_symbolic): Update. (sym_info): Update. (address_info): Update. * proc-service.c (ps_pglobal_lookup): Update. * psymtab.c (find_pc_sect_psymtab_closer): Update. (find_pc_sect_psymtab): Update. * python/py-framefilter.c (py_print_frame): Update. * ravenscar-thread.c (get_running_thread_id): Update. * record-btrace.c (btrace_call_history, btrace_get_bfun_name): Update. * remote.c (remote_check_symbols): Update. * rs6000-tdep.c (rs6000_skip_main_prologue): Update. (rs6000_skip_trampoline_code): Update. * sh64-tdep.c (sh64_elf_make_msymbol_special): Update. * sol2-tdep.c (sol2_skip_solib_resolver): Update. * solib-dsbt.c (lm_base): Update. * solib-frv.c (lm_base): Update. (main_got): Update. * solib-irix.c (locate_base): Update. * solib-som.c (som_solib_create_inferior_hook): Update. (som_solib_desire_dynamic_linker_symbols): Update. (link_map_start): Update. * solib-spu.c (spu_enable_break): Update. (ocl_enable_break): Update. * solib-svr4.c (elf_locate_base): Update. (enable_break): Update. * spu-tdep.c (spu_get_overlay_table): Update. (spu_catch_start): Update. (flush_ea_cache): Update. * stabsread.c (define_symbol): Update. (scan_file_globals): Update. * stack.c (find_frame_funname): Update. (frame_info): Update. * symfile.c (simple_read_overlay_table): Update. (simple_overlay_update): Update. * symmisc.c (dump_msymbols): Update. * symtab.c (fixup_section): Update. (find_pc_sect_line): Update. (skip_prologue_sal): Update. (search_symbols): Update. (print_msymbol_info): Update. (rbreak_command): Update. (MCOMPLETION_LIST_ADD_SYMBOL): New macro. (completion_list_objc_symbol): Update. (default_make_symbol_completion_list_break_on): Update. * tracepoint.c (scope_info): Update. * tui/tui-disasm.c (tui_find_disassembly_address): Update. (tui_get_begin_asm_address): Update. * valops.c (find_function_in_inferior): Update. * value.c (value_static_field): Update. (value_fn_field): Update. 2014-02-26 Tom Tromey * blockframe.c (find_pc_partial_function_gnu_ifunc): Use bound minimal symbols. Move code that knows about minsym table layout... * minsyms.c (minimal_symbol_upper_bound): ... here. New function. * minsyms.h (minimal_symbol_upper_bound): Declare. * objc-lang.c (find_objc_msgsend): Use bound minimal symbols, minimal_symbol_upper_bound. 2014-02-27 Joel Brobecker * python/lib/gdb/printing.py (RegexpCollectionPrettyPrinter): Use the type's name if its basic type does not have a tag. 2014-02-27 Joel Brobecker * dwarf2read.c (read_subrange_type): Add comment. 2014-02-27 Joel Brobecker * dwarf2read.c (update_enumeration_type_from_children): New function, mostly extracted from process_structure_scope. (read_enumeration_type): Call update_enumeration_type_from_children. (process_enumeration_scope): Do not set THIS_TYPE's flag_unsigned and flag_flag_enum fields. 2014-02-26 Pedro Alves * bsd-uthread.c (bsd_uthread_xfer_partial): Delete function. (bsd_uthread_target): Don't install bsd_uthread_xfer_partial as to_xfer_partial method. 2014-02-26 Pedro Alves * target.c (complete_target_initialization): Don't install default_xfer_partial as to_xfer_partial hook. (nomemory): Delete. (update_current_target): Don't INHERIT nor de_fault deprecated_xfer_memory. Delete de_fault macro. (default_xfer_partial, deprecated_debug_xfer_memory): Delete. (setup_target_debug): Don't install a deprecated_xfer_memory hook. * target.h (struct target_ops) : Delete field. 2014-02-26 Pedro Alves * go32-nat.c (my_write_child): New function. (go32_xfer_memory): Rewrite as to_xfer_partial helper. (go32_xfer_partial): New function. (init_go32_ops): Don't install a deprecated_xfer_memory hook. Instead install a to_xfer_partial hook. 2014-02-26 Pedro Alves * nto-procfs.c (procfs_xfer_memory): Adjust interface as a to_xfer_partial helper. Rewrite. (procfs_xfer_partial): New function. (init_procfs_ops): Don't install a deprecated_xfer_memory hook. Install a to_xfer_partial hook. 2014-02-26 Pedro Alves * remote-m32r-sdi.c (send_data): Constify 'buf' parameter. (m32r_xfer_memory): Adjust as a to_xfer_partial helper. (m32r_xfer_partial): New function. (init_m32r_ops): Don't install a deprecated_xfer_memory hook. Install a to_xfer_partial hook. 2014-02-26 Pedro Alves * remote-mips.c (mips_xfer_memory): Adjust as to_xfer_partial helper. (mips_xfer_partial): New function. (_initialize_remote_mips): Don't install a deprecated_xfer_memory hook. Install a to_xfer_partial hook. 2014-02-26 Joel Brobecker * gdbtypes.h (create_array_type_with_stride): Add declaration. * gdbtypes.c (create_array_type_with_stride): New function, renaming create_array_type, but with an added parameter called "bit_stride". (create_array_type): Re-implement using create_array_type_with_stride. * dwarf2read.c (read_array_type): Add support for DW_AT_byte_stride and DW_AT_bit_stride attributes. 2014-02-26 Pedro Alves * breakpoint.c (bpstat_check_breakpoint_conditions): Handle task-specific breakpoints. 2014-02-25 Pedro Alves * ia64-linux-nat.c (ia64_linux_xfer_partial): Reimplement handling of object == TARGET_OBJECT_UNWIND_TABLE. 2014-02-25 Stan Shebs * defs.h: Annotate comments for Doxygen. 2014-02-25 Tom Tromey * target.h (target_ignore): Don't declare. * target.c (target_ignore): Remove. 2014-02-25 Jan Kratochvil PR gdb/16626 * auto-load.c (auto_load_objfile_script_1): Change filename to debugfile. 2014-02-25 Joel Brobecker * ia64-linux-nat.c (ia64_linux_xfer_partial): Add function documentation. Adjust prototype to match the target_ops to_xfer_partial method. Adjust implementation accordingly. 2014-02-25 Hui Zhu * target.h (target_ops): Fix TARGET_DEFAULT_RETURN of to_traceframe_info. 2014-02-25 Kevin Buettner * rl78-tdep.c (RL78_BANK0_RP0_PTR_REGNUM, RL78_BANK0_RP1_PTR_REGNUM) (RL78_BANK0_RP2_PTR_REGNUM, RL78_BANK0_RP3_PTR_REGNUM) (RL78_BANK1_RP0_PTR_REGNUM, RL78_BANK1_RP1_PTR_REGNUM) (RL78_BANK1_RP2_PTR_REGNUM, RL78_BANK1_RP3_PTR_REGNUM) (RL78_BANK2_RP0_PTR_REGNUM, RL78_BANK2_RP1_PTR_REGNUM) (RL78_BANK2_RP2_PTR_REGNUM, RL78_BANK2_RP3_PTR_REGNUM) (RL78_BANK3_RP0_PTR_REGNUM, RL78_BANK3_RP1_PTR_REGNUM) (RL78_BANK3_RP2_PTR_REGNUM, RL78_BANK3_RP3_PTR_REGNUM): New constants. (rl78_register_type): Use a data pointer type for SP and new pseudo registers mentioned above. Use a 16 bit integer type for all other register pairs. (rl78_register_name, rl78_g10_register_name): Update for new pseudo registers. (rl78_pseudo_register_read): Likewise. (rl78_pseudo_register_write): Likewise. (rl78_dwarf_reg_to_regnum): Return register numbers representing to the newly added pseudo registers. 2014-02-24 Doug Evans * value.c (record_latest_value): Fix comment. * printcmd.c (print_command_1): Remove code to handle -1 return from record_latest_value. 2014-02-24 Pedro Alves * procfs.c (procfs_target): Don't install procfs_xfer_memory as deprecated_xfer_memory hook. (procfs_xfer_partial): Call procfs_xfer_memory instead of the deprecated_xfer_memory target hook. (procfs_xfer_memory): Adjust interface as a to_xfer_partial helper. 2014-02-24 Yuanhui Zhang * windows-nat.c (windows_xfer_shared_libraries): Return TARGET_XFER_EOF if LEN is zero to fix an assert failure when requested object is TARGET_OBJECT_LIBRARIES. 2014-02-24 Yao Qi * target.h (enum target_xfer_status) : Rename it to ... : ... it with setting value 2 explicitly. New. * corefile.c (memory_error_message): User updated. * exec.c (section_table_read_available_memory): Likewise. * record-btrace.c (record_btrace_xfer_partial): Likewise. * target.c (target_xfer_status_to_string): Likewise. (raw_memory_xfer_partial): Likewise. (memory_xfer_partial_1, target_xfer_partial): Likewise. * valops.c (read_value_memory): Likewise. * exec.h: Update comments. 2014-02-24 Yao Qi * target.c (target_xfer_status_to_string): Rename argument err to status. * target.h (target_xfer_status_to_string): Update declaration. Replace target_xfer_error_to_string with target_xfer_status_to_string in comment. 2014-02-24 Yao Qi * mips-linux-nat.c (super_close): Update its type. (mips_linux_close): Pass 'self' to super_close. 2014-02-24 Yao Qi * target.h (TARGET_XFER_STATUS_ERROR_P): Remove. * corefile.c (read_memory): Adjusted. * target.c (target_write_with_progress): Adjusted. 2014-02-23 Yao Qi Revert two patches: 2013-10-25 Yao Qi * remote.c (remote_traceframe_info): Return early if traceframe is not selected. 2013-07-19 Yao Qi * target.c (update_current_target): Change the default action of 'to_traceframe_info' from tcomplain to return_zero. * target.h (struct target_ops) : Add more comments. 2014-02-23 Yao Qi * valops.c (read_value_memory): Rewrite it. Call target_xfer_partial in a loop. * exec.h (section_table_available_memory): Remove declaration. Move comments to ... * exec.c (section_table_available_memory): ... here. Make it static. 2014-02-23 Yao Qi * exec.c (section_table_read_available_memory): New function. * exec.h (section_table_read_available_memory): Declare. * ctf.c (ctf_xfer_partial): Call section_table_read_available_memory. * tracefile-tfile.c (tfile_xfer_partial): Likewise. 2014-02-23 Yao Qi * ctf.c (ctf_xfer_partial): Move code to ... * exec.c (exec_read_partial_read_only): ... it. New function. * tracefile-tfile.c (tfile_xfer_partial): Likewise. * tracefile.c: Include "exec.h". * exec.h (exec_read_partial_read_only): Declare. 2014-02-23 Yao Qi * tracefile-tfile.c (tfile_has_all_memory): Remove. (tfile_has_memory): Remove. (init_tfile_ops): Don't set fields to_has_all_memory and to_has_memory of tfile_ops. * tracefile.c (tracefile_has_all_memory): New function. (tracefile_has_memory): New function. (init_tracefile_ops): Initialize fields to_has_all_memory and to_has_memory of 'ops'. 2014-02-23 Yao Qi * ctf.c (ctf_has_stack, ctf_has_registers): Remove. (ctf_thread_alive, ctf_get_trace_status): Remove. (init_ctf_ops): Don't set some fields of ctf_ops. Call init_tracefile_ops. * tracefile-tfile.c (tfile_get_trace_status): Remove. (tfile_has_stack, tfile_has_registers): Remove. (tfile_thread_alive): Remove. (init_tfile_ops): Don't set some fields of tfile_ops. Call init_tracefile_ops. * tracefile.c (tracefile_has_stack): New function. (tracefile_has_registers): New function. (tracefile_thread_alive): New function. (tracefile_get_trace_status): New function. (init_tracefile_ops): New function. * tracefile.h (init_tracefile_ops): Declare. 2014-02-23 Yao Qi * tracepoint.c (TFILE_PID): Move it to tracefile-tfile.c. (O_LARGEFILE): Likewise. (tfile_ops): Likewise. (TRACE_HEADER_SIZE): Likewise. (trace_fd, trace_frames_offset, cur_offset): Likewise. (cur_data_size): Likewise. (tfile_read, tfile_open, tfile_interp_line): Likewise. (tfile_close, tfile_files_info): Likewise. (tfile_get_trace_status): Likewise. (tfile_get_tracepoint_status): Likewise. (tfile_get_traceframe_address): Likewise. (tfile_trace_find, match_blocktype): Likewise. (traceframe_walk_blocks, traceframe_find_block_type): Likewise. (tfile_fetch_registers, tfile_xfer_partial): Likewise. (tfile_get_trace_state_variable_value): Likewise. (tfile_has_all_memory, tfile_has_memory): Likewise. (tfile_has_stack, tfile_has_registers): Likewise. (tfile_thread_alive, build_traceframe_info): Likewise. (tfile_traceframe_info, init_tfile_ops): Likewise. (_initialize_tracepoint): Don't call init_tfile_ops and add_target_with_completer. * tracefile-tfile.c: Include regcache.h, inferior.h, gdbthread.h, exec.h, completer.h and filenames.h. (_initialize_tracefile_tfile): New function. 2014-02-23 Yao Qi * Makefile.in (REMOTE_OBS): Append tracefile.o and tracefile-tfile.o. (HFILES_NO_SRCDIR): Add tracefile.h. * ctf.c: Include "tracefile.h". * tracefile.h: New file. * tracefile.c: New file * tracefile-tfile.c: New file. * tracepoint.c: Include "tracefile.h". (free_uploaded_tps, free_uploaded_tsvs): Remove declarations. (stop_reason_names): Add const. (trace_file_writer_xfree): Move it to tracefile.c. (trace_save, trace_save_command, trace_save_tfile): Likewise. (trace_save_ctf): Likewise. (struct tfile_trace_file_writer): Move it to tracefile-tfile.c. (tfile_target_save, tfile_dtor, tfile_start): Likewise. (tfile_write_header, tfile_write_regblock_type): Likewise. (tfile_write_status, tfile_write_uploaded_tsv): Likewise. (tfile_write_uploaded_tp, tfile_write_definition_end): Likewise. (tfile_write_raw_data, tfile_end): Likewise. (tfile_trace_file_writer_new): Likewise. (free_uploaded_tp): Make it extern. (free_uploaded_tsv): Make it extern. (_initialize_tracepoint): Move code to register command 'tsave' to tracefile.c. * tracepoint.h (stop_reason_names): Declare. (struct trace_frame_write_ops): Move it to tracefile.h. (struct trace_file_write_ops): Likewise. (struct trace_file_writer): Likewise. (free_uploaded_tsvs, free_uploaded_tps): Declare. 2014-02-21 Jan Kratochvil PR gdb/16594 * common/linux-osdata.c (linux_common_core_of_thread): Find the end of process name. (get_cores_used_by_process): New parameter num_cores, use it. (linux_xfer_osdata_processes): Pass num_cores to it. * linux-tdep.c (linux_info_proc, linux_fill_prpsinfo): Find the end of process name. 2014-02-21 Andreas Arnez * target.c (memory_xfer_partial): Fix length arg in call to breakpoint_xfer_memory. 2014-02-20 Sergio Durigan Junior PR tdep/16397 * i386-tdep.c (i386_stap_parse_special_token_triplet): Check if a number comes after the + or - signs. Adjust length of register name to be extracted. 2014-02-20 Tom Tromey * varobj.h (c_varobj_ops, cplus_varobj_ops, java_varobj_ops) (ada_varobj_ops): Mark "extern". 2014-02-20 Tom Tromey * dbxread.c (read_dbx_symtab): Remove last_o_file_start. 2014-02-20 Doug Evans * guile/scm-gsmob.c (gdbscm_init_eqable_gsmob): New arg containing_scm. All callers updated. (gdbscm_fill_eqable_gsmob_ptr_slot): Delete arg containing_scm. All callers updated. * guile/guile-internal.h (gdbscm_init_eqable_gsmob): Update. (gdbscm_fill_eqable_gsmob_ptr_slot): Update. 2014-02-20 lin zuojian Joel Brobecker Doug Evans PR symtab/16581 * dwarf2read.c (struct die_info): New member in_process. (reset_die_in_process): New function. (process_die): Set it at the start, reset when returning. (inherit_abstract_dies): Only call process_die if origin_child_die not already being processed. 2014-02-20 Joel Brobecker * windows-nat.c (handle_unload_dll): Add function documentation. (do_initial_windows_stuff): Add comment explaining why we wait until after inferior initialization has finished before processing all DLLs. 2014-02-20 Joel Brobecker * windows-nat.c (get_module_name): Delete. (windows_get_exec_module_filename): New function, mostly inspired from get_module_name. (windows_pid_to_exec_file): Replace call to get_module_name by call to windows_get_exec_module_filename. 2014-02-20 Joel Brobecker * windows-nat.c (handle_load_dll): Rewrite this function's introductory comment. Remove code using get_module_name to get the DLL's name. 2014-02-20 Joel Brobecker * windows-nat.c (get_windows_debug_event): Ignore LOAD_DLL_DEBUG_EVENT and UNLOAD_DLL_DEBUG_EVENT if windows_initialization_done == 0. (windows_add_all_dlls): Renames windows_ensure_ntdll_loaded. Adjust implementation to always load all DLLs. (do_initial_windows_stuff): Replace call to windows_ensure_ntdll_loaded by call to windows_add_all_dlls. 2014-02-20 Joel Brobecker * windows-nat.c (_initialize_windows_nat): Deprecate the "dll-symbols" command. Turn the "add-shared-symbol-files" and "assf" aliases into commands, and deprecate them as well. * NEWS: Add entry explaining that "dll-symbols" and its two aliases are now deprecated. 2014-02-20 Joel Brobecker * dec-thread.c (dec_thread_get_ada_task_ptid): Avoid unescaped new-line in debug string. Remove trailing spaces. 2014-02-19 Stan Shebs * darwin-nat.c (darwin_xfer_partial): Fix return type. 2014-02-19 Siva Chandra Reddy * NEWS: Add entry for the new feature * python/py-value.c (valpy_binop): Call value_x_binop for struct and class values. 2014-02-19 Stan Shebs * MAINTAINERS: List Yao Qi as nios2 maintainer. 2014-02-19 Pedro Alves * common/ptid.h (struct ptid): Mention that process_stratum targets should prefer ptid.lwp. 2014-02-19 Pedro Alves * remote.c (remote_thread_alive, write_ptid, read_ptid) (read_ptid, remote_newthread_step, remote_threads_extra_info) (remote_get_ada_task_ptid, append_resumption, remote_stop_ns) (threadalive_test, remote_pid_to_str): Use the ptid.lwp field to store remote thread ids rather than ptid.tid. (_initialize_remote): Adjust. 2014-02-19 Tom Tromey * target.c (target_get_unwinder): Rewrite. (target_get_tailcall_unwinder): Rewrite. * record-btrace.c (record_btrace_to_get_unwinder): New function. (record_btrace_to_get_tailcall_unwinder): New function. (init_record_btrace_ops): Update. * target.h (struct target_ops) : Now function pointers. Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * nto-procfs.c (procfs_remove_hw_breakpoint): Add 'self' argument. (init_procfs_ops): Correctly set to_remove_hw_breakpoint. 2014-02-19 Tom Tromey * record-btrace.c (record_btrace_decr_pc_after_break): Delegate directly. * target-delegates.c: Rebuild. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. * target.c (default_target_decr_pc_after_break): Rename from forward_target_decr_pc_after_break. Simplify. (target_decr_pc_after_break): Rely on delegation. 2014-02-19 Tom Tromey * target.c (update_current_target): Do not INHERIT to_doc or to_magic. Do not de_fault to_open or to_close. 2014-02-19 Tom Tromey * gcore.h (objfile_find_memory_regions): Declare. * gcore.c (objfile_find_memory_regions): No longer static. Add "self" argument. (_initialize_gcore): Don't call exec_set_find_memory_regions. * exec.c: Include gcore.h. (exec_set_find_memory_regions): Remove. (exec_find_memory_regions): Remove. (exec_do_find_memory_regions): Remove. (init_exec_ops): Update. * defs.h (exec_set_find_memory_regions): Remove. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.h (struct target_ops) : Use NULL, not 0, in TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target.c (complete_target_initialization): Remove casts. Use return_zero_has_execution. (return_zero): Add "ignore" argument. (return_zero_has_execution): New function. (init_dummy_target): Remove casts. Use return_zero_has_execution. 2014-02-19 Tom Tromey * target.c (update_current_target): Update comments. Do not INHERIT to_stratum. 2014-02-19 Tom Tromey * arm-linux-nat.c (arm_linux_read_description): Delegate when needed. * corelow.c (core_read_description): Delegate when needed. * remote.c (remote_read_description): Delegate when needed. * target-delegates.c: Rebuild. * target.c (target_read_description): Rewrite. * target.h (struct target_ops) : Update comment. Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_can_run. (find_default_run_target): Check against delegate_can_run. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_disconnect): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * record.c (record_stop): Unconditionally delegate. * target-delegates.c: Rebuild. * target.c (target_stop_recording): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_enable_btrace): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_read_btrace): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_teardown_btrace): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_disable_btrace): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (default_search_memory): New function. (simple_search_memory): Update comment. (target_search_memory): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. 2014-02-19 Tom Tromey * auxv.c (default_auxv_parse): No longer static. (target_auxv_parse): Unconditionally delegate. * auxv.h (default_auxv_parse): Declare. * target-delegates.c: Rebuild. * target.c: Include auxv.h. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_memory_map): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_thread_alive): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_save_record): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_delete_record): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_record_is_replaying): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_goto_record_begin): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_goto_record_end): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_goto_record): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_insn_history): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_insn_history_from): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_insn_history_range): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_call_history): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_call_history_from): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_call_history_range): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_verify_memory): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_core_of_thread): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_flash_done): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_flash_erase): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_get_section_table): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_pid_to_str): Unconditionally delegate. (init_dummy_target): Don't initialize to_pid_to_str. (default_pid_to_str): Rename from dummy_pid_to_str. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_find_new_threads): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_program_signals): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_pass_signals): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (default_mourn_inferior): New function. (target_mourn_inferior): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (default_follow_fork): New function. (target_follow_fork): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_kill): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_masked_watch_num_registers): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_remove_mask_watchpoint): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_insert_mask_watchpoint): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_ranged_break_num_registers): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_fetch_registers): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_stop. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_can_run_breakpoint_commands. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_supports_evaluation_of_breakpoint_conditions. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_augmented_libraries_svr4_read. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_can_use_agent. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_use_agent. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_traceframe_info. (return_null): Remove. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_static_tracepoint_markers_by_strid. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_static_tracepoint_marker_at. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_set_permissions. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_get_tib_address. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_set_trace_notes. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't initialize to_set_trace_buffer_size. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_set_circular_trace_buffer. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_set_disconnected_tracing. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_get_min_fast_tracepoint_insn_len. (return_minus_one): Remove. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_get_raw_trace_data. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_upload_trace_state_variables. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_upload_tracepoints. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_save_trace_data. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_get_trace_state_variable_value. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_trace_find. * target.h (struct target_ops): Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_trace_stop. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_get_tracepoint_status. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_get_trace_status. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_trace_start. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_trace_set_readonly_regions. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_disable_tracepoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_enable_tracepoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_download_trace_state_variable. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_can_download_tracepoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_download_tracepoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_trace_init. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_supports_string_tracing. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_supports_enable_disable_tracepoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_supports_multi_process. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_get_ada_task_ptid. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_thread_architecture. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_execution_direction. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_can_execute_reverse. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. (target_can_execute_reverse): Unconditionally delegate. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_goto_bookmark. (dummy_goto_bookmark): Remove. (init_dummy_target): Don't inherit or default to_goto_bookmark. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_get_bookmark. (dummy_get_bookmark): Remove. (init_dummy_target): Don't inherit or default to_get_bookmark. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_make_corefile_notes. (init_dummy_target): Don't initialize to_make_corefile_notes. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_find_memory_regions. (init_dummy_target): Don't initialize to_find_memory_regions. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_log_command. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. (target_log_command): Unconditionally delegate. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_pid_to_exec_file. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_thread_name. (target_thread_name): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_extra_thread_info. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_has_exited. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN.. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_set_syscall_catchpoint. (return_one): Remove. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_insert_exec_catchpoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-01-08 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_insert_exec_catchpoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_remove_vfork_catchpoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_insert_vfork_catchpoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_remove_fork_catchpoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_insert_fork_catchpoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_post_startup_inferior. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_load. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_terminal_info. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_terminal_save_ours. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_terminal_ours. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_terminal_ours_for_output. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_terminal_inferior. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_terminal_init. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_can_accel_watchpoint_condition. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_region_ok_for_hw_watchpoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_watchpoint_addr_within_range. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_remove_watchpoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_insert_watchpoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_remove_hw_breakpoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_insert_hw_breakpoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_can_use_hw_breakpoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_files_info. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_store. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_post_attach. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_rcmd. (default_rcmd): New function. (do_monitor_command): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (init_dummy_target): Don't initialize to_attach. (target_attach): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_detach): Unconditionally delegate. (init_dummy_target): Don't initialize to_detach. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_augmented_libraries_svr4_read): Add argument. * target.c (update_current_target): Update. * remote.c (remote_augmented_libraries_svr4_read): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_call_history_range): Add argument. * record-btrace.c (record_btrace_call_history_range): Add 'self' argument. (record_btrace_call_history_from): Update. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_call_history_from): Add argument. * record-btrace.c (record_btrace_call_history_from): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_call_history): Add argument. * record-btrace.c (record_btrace_call_history): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_insn_history_range): Add argument. * record-btrace.c (record_btrace_insn_history_range): Add 'self' argument. (record_btrace_insn_history_from): Update. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_insn_history_from): Add argument. * record-btrace.c (record_btrace_insn_history_from): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_insn_history): Add argument. * record-btrace.c (record_btrace_insn_history): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_goto_record): Add argument. * record-full.c (record_full_goto): Add 'self' argument. * record-btrace.c (record_btrace_goto): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_goto_record_end): Add argument. * record-full.c (record_full_goto_end): Add 'self' argument. * record-btrace.c (record_btrace_goto_end): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_goto_record_begin): Add argument. * record-full.c (record_full_goto_begin): Add 'self' argument. * record-btrace.c (record_btrace_goto_begin): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_record_is_replaying): Add argument. * record-full.c (record_full_is_replaying): Add 'self' argument. * record-btrace.c (record_btrace_is_replaying): Add 'self' argument. (record_btrace_xfer_partial, record_btrace_store_registers) (record_btrace_prepare_to_store, record_btrace_resume) (record_btrace_wait, record_btrace_decr_pc_after_break) (record_btrace_find_new_threads, record_btrace_thread_alive): Update. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_delete_record): Add argument. * record-full.c (record_full_delete): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_save_record): Add argument. * record-full.c (record_full_save): Add 'self' argument. (record_full_save): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_info_record): Add argument. * record.c (info_record_command): Add argument. * record-full.c (record_full_info): Add 'self' argument. * record-btrace.c (record_btrace_info): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_stop_recording): Add argument. * record.c (record_stop): Add argument. * record-btrace.c (record_btrace_stop_recording): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (struct target_ops) : Add argument. * remote.c (struct target_ops) : Add 'self' argument. * amd64-linux-nat.c (amd64_linux_read_btrace): New function. (_initialize_amd64_linux_nat): Use it. * i386-linux-nat.c (i386_linux_read_btrace): New function. (_initialize_i386_linux_nat): Use it. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_teardown_btrace): Add argument. * remote.c (remote_teardown_btrace): Add 'self' argument. * i386-linux-nat.c (i386_linux_teardown_btrace): Add 'self' argument. * amd64-linux-nat.c (amd64_linux_teardown_btrace): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_disable_btrace): Add argument. * remote.c (remote_disable_btrace): Add 'self' argument. * i386-linux-nat.c (i386_linux_disable_btrace): Add 'self' argument. * amd64-linux-nat.c (amd64_linux_disable_btrace): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_enable_btrace): Add argument. * remote.c (remote_enable_btrace): Add 'self' argument. * i386-linux-nat.c (i386_linux_enable_btrace): Add 'self' argument. * amd64-linux-nat.c (amd64_linux_enable_btrace): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_can_use_agent): Add argument. * target.c (update_current_target): Update. * remote.c (remote_can_use_agent): Add 'self' argument. * inf-child.c (inf_child_can_use_agent): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_use_agent): Add argument. * target.c (update_current_target): Update. * remote.c (remote_use_agent): Add 'self' argument. * inf-child.c (inf_child_use_agent): Add 'self' argument. 2014-02-19 Tom Tromey * tracepoint.c (tfile_traceframe_info): Add 'self' argument. * target.h (struct target_ops) : Add argument. (target_traceframe_info): Add argument. * target.c (update_current_target): Update. * remote.c (remote_traceframe_info): Add 'self' argument. * ctf.c (ctf_traceframe_info): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (target_static_tracepoint_markers_by_strid): Add argument. (struct target_ops) : Add 'self' argument. * target.c (update_current_target): Update. * remote.c (struct target_ops) : Add 'self' argument. * linux-nat.c (struct target_ops) : Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_static_tracepoint_marker_at): Add argument. * target.c (update_current_target): Update. * remote.c (remote_static_tracepoint_marker_at): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_set_permissions): Add argument. * target.c (update_current_target): Update. * remote.c (remote_set_permissions): Add 'self' argument. (remote_start_remote): Update. 2014-02-19 Tom Tromey * windows-nat.c (windows_get_tib_address): Add 'self' argument. * target.h (struct target_ops) : Add argument. (target_get_tib_address): Add argument. * target.c (update_current_target): Update. * remote.c (remote_get_tib_address): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_set_trace_notes): Add argument. * target.c (update_current_target): Update. * remote.c (remote_set_trace_notes): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_set_trace_buffer_size): Add argument. * target.c (update_current_target): Update. * remote.c (remote_set_trace_buffer_size): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_set_circular_trace_buffer): Add argument. * target.c (update_current_target): Update. * remote.c (remote_set_circular_trace_buffer): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_set_disconnected_tracing): Add argument. * target.c (update_current_target): Update. * remote.c (remote_set_disconnected_tracing): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_get_min_fast_tracepoint_insn_len): Add argument. * target.c (update_current_target): Update. * remote.c (remote_get_min_fast_tracepoint_insn_len): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_get_raw_trace_data): Add argument. * target.c (update_current_target): Update. * remote.c (remote_get_raw_trace_data): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_upload_trace_state_variables): Add argument. * target.c (update_current_target): Update. * remote.c (remote_upload_trace_state_variables): Add 'self' argument. (remote_start_remote): Update. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_upload_tracepoints): Add argument. * target.c (update_current_target): Update. * remote.c (remote_upload_tracepoints): Add 'self' argument. (remote_start_remote): Update. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_save_trace_data): Add argument. * target.c (update_current_target): Update. * remote.c (remote_save_trace_data): Add 'self' argument. 2014-02-19 Tom Tromey * tracepoint.c (tfile_get_trace_state_variable_value): Add 'self' argument. * target.h (struct target_ops) : Add argument. (target_get_trace_state_variable_value): Add argument. * target.c (update_current_target): Update. * remote.c (remote_get_trace_state_variable_value): Add 'self' argument. * ctf.c (ctf_get_trace_state_variable_value): Add 'self' argument. 2014-02-19 Tom Tromey * tracepoint.c (tfile_trace_find): Add 'self' argument. * target.h (struct target_ops) : Add argument. (target_trace_find): Add argument. * target.c (update_current_target): Update. * remote.c (remote_trace_find): Add 'self' argument. * ctf.c (ctf_trace_find): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_trace_stop): Add argument. * target.c (update_current_target): Update. * remote.c (remote_trace_stop): Add 'self' argument. 2014-02-19 Tom Tromey * tracepoint.c (tfile_get_tracepoint_status): Add 'self' argument. * target.h (struct target_ops) : Add argument. (target_get_tracepoint_status): Add argument. * target.c (update_current_target): Update. * remote.c (remote_get_tracepoint_status): Add 'self' argument. 2014-02-19 Tom Tromey * tracepoint.c (tfile_get_trace_status): Add 'self' argument. * target.h (struct target_ops) : Add argument. (target_get_trace_status): Add argument. * target.c (update_current_target): Update. * remote.c (remote_get_trace_status): Add 'self' argument. (remote_start_remote, remote_can_download_tracepoint): Update. * ctf.c (ctf_get_trace_status): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_trace_start): Add argument. * target.c (update_current_target): Update. * remote.c (remote_trace_start): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_trace_set_readonly_regions): Add argument. * target.c (update_current_target): Update. * remote.c (remote_trace_set_readonly_regions): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_disable_tracepoint): Add argument. * target.c (update_current_target): Update. * remote.c (remote_disable_tracepoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_enable_tracepoint): Add argument. * target.c (update_current_target): Update. * remote.c (remote_enable_tracepoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_download_trace_state_variable): Add argument. * target.c (update_current_target): Update. * remote.c (remote_download_trace_state_variable): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_can_download_tracepoint): Add argument. * target.c (update_current_target): Update. * remote.c (remote_can_download_tracepoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_download_tracepoint): Add argument. * target.c (update_current_target): Update. * remote.c (remote_download_tracepoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_trace_init): Add argument. * target.c (update_current_target): Update. * remote.c (remote_trace_init): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_fileio_readlink): Add argument. * remote.c (remote_hostio_readlink): Add 'self' argument. * inf-child.c (inf_child_fileio_readlink): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_fileio_unlink): Add argument. * remote.c (remote_hostio_unlink): Add 'self' argument. (remote_file_delete): Update. * inf-child.c (inf_child_fileio_unlink): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_fileio_close): Add argument. * remote.c (remote_hostio_close): Add 'self' argument. (remote_hostio_close_cleanup): Update. (remote_bfd_iovec_close, remote_file_put, remote_file_get): Update. * inf-child.c (inf_child_fileio_close): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_fileio_pread): Add argument. * remote.c (remote_hostio_pread): Add 'self' argument. (remote_bfd_iovec_pread, remote_file_get): Update. * inf-child.c (inf_child_fileio_pread): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_fileio_pwrite): Add argument. * remote.c (remote_hostio_pwrite): Add 'self' argument. (remote_file_put): Update. * inf-child.c (inf_child_fileio_pwrite): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_fileio_open): Add argument. * remote.c (remote_hostio_open): Add 'self' argument. (remote_bfd_iovec_open): Add 'self' argument. (remote_file_put): Add 'self' argument. (remote_file_get): Add 'self' argument. * inf-child.c (inf_child_fileio_open): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_can_run_breakpoint_commands): Add argument. * target.c (update_current_target): Update. * remote.c (remote_can_run_breakpoint_commands): Add 'self' argument. (remote_insert_breakpoint): Add 'self' argument. (remote_insert_hw_breakpoint): Add 'self' argument. (remote_can_run_breakpoint_commands): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_supports_evaluation_of_breakpoint_conditions): Add argument. * target.c (update_current_target): Update. * remote.c (remote_supports_cond_breakpoints): Add 'self' argument. (remote_insert_breakpoint): Add 'self' argument. (remote_insert_hw_breakpoint): Add 'self' argument. (remote_supports_cond_breakpoints): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_supports_string_tracing): Add argument. * target.c (update_current_target): Update. * remote.c (remote_supports_string_tracing): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (find_default_supports_disable_randomization): Add argument. (target_supports_disable_randomization): Add argument. (find_default_supports_disable_randomization): Add 'self' argument. * remote.c (extended_remote_supports_disable_randomization): Add 'self' argument. (remote_supports_disable_randomization): Add 'self' argument. (extended_remote_create_inferior): Update. * linux-nat.c (linux_nat_supports_disable_randomization): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_supports_enable_disable_tracepoint): Add argument. * target.c (update_current_target): Update. * remote.c (remote_supports_enable_disable_tracepoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_supports_multi_process): Add argument. * target.c (update_current_target): Update. * remote.c (remote_supports_multi_process): Add 'self' argument. * linux-nat.c (linux_nat_supports_multi_process): Add 'self' argument. * darwin-nat.c (darwin_supports_multi_process): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_execution_direction): Add argument. * target.c (default_execution_direction): Add 'self' argument. * record-full.c (record_full_execution_direction): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_can_execute_reverse): Add argument. * remote.c (remote_can_execute_reverse): Add 'self' argument. * record-full.c (record_full_can_execute_reverse): Add 'self' argument. * record-btrace.c (record_btrace_can_execute_reverse): Add 'self' argument. 2014-02-19 Tom Tromey * windows-nat.c (windows_get_ada_task_ptid): Add 'self' argument. * target.h (struct target_ops) : Add argument. (target_get_ada_task_ptid): Add argument. * target.c (update_current_target): Update. (default_get_ada_task_ptid): Add 'self' argument. * sol-thread.c (sol_get_ada_task_ptid): Add 'self' argument. * remote.c (remote_get_ada_task_ptid): Add 'self' argument. * ravenscar-thread.c (ravenscar_get_ada_task_ptid): Add 'self' argument. * linux-thread-db.c (thread_db_get_ada_task_ptid): Add 'self' argument. * inf-ttrace.c (inf_ttrace_get_ada_task_ptid): Add 'self' argument. * dec-thread.c (dec_thread_get_ada_task_ptid): Add 'self' argument. * darwin-nat.c (darwin_get_ada_task_ptid): Add 'self' argument. * aix-thread.c (aix_thread_get_ada_task_ptid): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_goto_bookmark): Add argument. * target.c (dummy_goto_bookmark): Add 'self' argument. * record-full.c (record_full_goto_bookmark): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_get_bookmark): Add argument. * target.c (dummy_get_bookmark): Add 'self' argument. * record-full.c (record_full_get_bookmark): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_make_corefile_notes): Add argument. * target.c (dummy_make_corefile_notes): Add 'self' argument. * procfs.c (procfs_make_note_section): Add 'self' argument. (procfs_make_note_section): Add 'self' argument. (procfs_make_note_section): Add 'self' argument. * linux-nat.c (linux_nat_make_corefile_notes): Add 'self' argument. * fbsd-nat.h (fbsd_make_corefile_notes): Add 'self' argument. * fbsd-nat.c (fbsd_make_corefile_notes): Add 'self' argument. * exec.c (exec_make_note_section): Add 'self' argument. (exec_make_note_section): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_find_memory_regions): Add argument. * target.c (dummy_find_memory_regions): Add 'self' argument. * procfs.c (proc_find_memory_regions): Add 'self' argument. * gnu-nat.c (gnu_find_memory_regions): Add 'self' argument. * fbsd-nat.h (fbsd_find_memory_regions): Add 'self' argument. * fbsd-nat.c (fbsd_find_memory_regions): Add 'self' argument. * exec. (exec_do_find_memory_regions): New global. (exec_set_find_memory_regions): Rewrite. (exec_find_memory_regions): New function. (init_exec_ops): Use exec_find_memory_regions. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (find_default_supports_non_stop): Add argument. (target_supports_non_stop): Add argument. (find_default_supports_non_stop): Add 'self' argument. * remote.c (remote_supports_non_stop): Add 'self' argument. * linux-nat.c (linux_nat_supports_non_stop): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_log_command): Add argument. * serial.h (serial_log_command): Add 'self' argument. * serial.c (serial_log_command): Add 'self' argument. 2014-02-19 Tom Tromey * windows-nat.c (windows_pid_to_exec_file): Add 'self' argument. * target.h (struct target_ops) : Add argument. (target_pid_to_exec_file): Add argument. * target.c (debug_to_pid_to_exec_file): Add argument. (update_current_target): Update. * nbsd-nat.h (nbsd_pid_to_exec_file): Add 'self' argument. * nbsd-nat.c (nbsd_pid_to_exec_file): Add 'self' argument. * linux-nat.c (linux_child_pid_to_exec_file): Add 'self' argument. (linux_handle_extended_wait): Update. * inf-child.c (inf_child_pid_to_exec_file): Add 'self' argument. * fbsd-nat.h (fbsd_pid_to_exec_file): Add 'self' argument. * fbsd-nat.c (fbsd_pid_to_exec_file): Add 'self' argument. * darwin-nat.c (darwin_pid_to_exec_file): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_rcmd): Add argument. * target.c (debug_to_rcmd): Add argument. (update_current_target, do_monitor_command): Update. * remote.c (remote_rcmd): Add 'self' argument. * monitor.c (monitor_rcmd): Add 'self' argument. 2014-02-19 Tom Tromey * windows-nat.c (windows_stop): Add 'self' argument. * target.h (struct target_ops) : Add argument. * target.c (target_stop): Add argument. (debug_to_stop): Add argument. (update_current_target): Update. * remote.c (remote_stop): Add 'self' argument. * remote-sim.c (gdbsim_stop): Add 'self' argument. (gdbsim_cntrl_c): Update. * remote-m32r-sdi.c (m32r_stop): Add 'self' argument. * procfs.c (procfs_stop): Add 'self' argument. * nto-procfs.c (procfs_stop): Add 'self' argument. * monitor.c (monitor_stop): Add 'self' argument. (monitor_open): Update. * linux-nat.c (linux_nat_stop): Add argument. * inf-ptrace.c (inf_ptrace_stop): Add 'self' argument. * gnu-nat.c (gnu_stop): Add 'self' argument. * darwin-nat.c (darwin_stop): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_thread_name): Add argument. (update_current_target): Update. * linux-nat.c (linux_nat_thread_name): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_extra_thread_info): Add argument. * target.c (update_current_target): Update. * remote.c (remote_threads_extra_info): Add 'self' argument. * ravenscar-thread.c (ravenscar_extra_thread_info): Add 'self' argument. * nto-tdep.h (nto_extra_thread_info): Add 'self' argument. * nto-tdep.c (nto_extra_thread_info): Add 'self' argument. * linux-thread-db.c (thread_db_extra_thread_info): Add 'self' argument. * inf-ttrace.c (inf_ttrace_extra_thread_info): Add 'self' argument. * bsd-uthread.c (bsd_uthread_extra_thread_info): Add 'self' argument. * aix-thread.c (aix_thread_extra_thread_info): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_program_signals): Add argument. * remote.c (remote_program_signals): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_pass_signals): Add argument. * remote.c (remote_pass_signals): Add 'self' argument. (remote_start_remote): Update. * procfs.c (procfs_pass_signals): Add 'self' argument. * nto-procfs.c (procfs_pass_signals): Add 'self' argument. * linux-nat.c (linux_nat_pass_signals): Add 'self' argument. (linux_nat_create_inferior, linux_nat_attach): Update. 2014-02-19 Tom Tromey * windows-nat.c (windows_can_run): Add 'self' argument. * target.h (struct target_ops) : Add argument. (target_can_run): Add argument. * target.c (debug_to_can_run): Add argument. (update_current_target): Update. * nto-procfs.c (procfs_can_run): Add 'self' argument. * inf-child.c (inf_child_can_run): Add 'self' argument. * go32-nat.c (go32_can_run): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_has_exited): Add argument. * target.c (debug_to_has_exited): Add argument. (update_current_target): Update. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_set_syscall_catchpoint): Add argument. * linux-nat.c (linux_child_set_syscall_catchpoint): Add 'self' argument. * target.c (update_current_target): Update. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_remove_exec_catchpoint): Add argument. * target.c (debug_to_remove_exec_catchpoint): Add argument. (update_current_target): Update. * linux-nat.c (linux_child_remove_exec_catchpoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_insert_exec_catchpoint): Add argument. * target.c (debug_to_insert_exec_catchpoint): Add argument. (update_current_target): Update. * linux-nat.c (linux_child_insert_exec_catchpoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_remove_vfork_catchpoint): Add argument. * target.c (debug_to_remove_vfork_catchpoint): Add argument. (update_current_target): Update. * linux-nat.c (linux_child_remove_vfork_catchpoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_insert_vfork_catchpoint): Add argument. * target.c (debug_to_insert_vfork_catchpoint): Add argument. (update_current_target): Update. * linux-nat.c (linux_child_insert_vfork_catchpoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_remove_fork_catchpoint): Add argument. * target.c (debug_to_remove_fork_catchpoint): Add argument. (update_current_target): Update. * linux-nat.c (linux_child_remove_fork_catchpoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_insert_fork_catchpoint): Add argument. * target.c (debug_to_insert_fork_catchpoint): Add argument. (update_current_target): Update. * linux-nat.c (linux_child_insert_fork_catchpoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_post_startup_inferior): Add argument. * target.c (debug_to_post_startup_inferior): Add argument. (update_current_target): Update. * spu-linux-nat.c (spu_child_post_startup_inferior): Add 'self' argument. * linux-nat.c (linux_child_post_startup_inferior): Add 'self' argument. * inf-ptrace.c (inf_ptrace_post_startup_inferior): Add 'self' argument. * inf-child.c (inf_child_post_startup_inferior): Add 'self' argument. * i386-linux-nat.c (i386_linux_child_post_startup_inferior): Add 'self' argument. (super_post_startup_inferior): Likewise. * amd64-linux-nat.c (amd64_linux_child_post_startup_inferior): Add 'self' argument. (super_post_startup_inferior): Likewise. * aarch64-linux-nat.c (aarch64_linux_child_post_startup_inferior): Add 'self' argument. (super_post_startup_inferior): Likewise. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_load): Add argument. (debug_to_load): Add argument. (update_current_target): Update. * remote.c (remote_load): Add 'self' argument. * remote-sim.c (gdbsim_load): Add 'self' argument. * remote-mips.c (mips_load): Add 'self' argument. * remote-m32r-sdi.c (m32r_load): Add 'self' argument. * monitor.c (monitor_load): Add 'self' argument. * m32r-rom.c (m32r_load_gen): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_terminal_info): Add argument. * target.c (debug_to_terminal_info): Add argument. (default_terminal_info): Likewise. * inflow.c (child_terminal_info): Add 'self' argument. * inferior.h (child_terminal_info): Add 'self' argument. * go32-nat.c (go32_terminal_info): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_terminal_save_ours): Add argument. * target.c (debug_to_terminal_save_ours): Add argument. (update_current_target): Update. * inflow.c (terminal_save_ours): Add 'self' argument. * inferior.h (terminal_save_ours): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_terminal_ours): Add argument. * target.c (debug_to_terminal_ours): Add argument. (update_current_target): Update. * remote.c (remote_terminal_ours): Add 'self' argument. (remote_close): Update. * linux-nat.c (linux_nat_terminal_ours): Add 'self' argument. * inflow.c (terminal_ours): Add 'self' argument. * inferior.h (terminal_ours): Add 'self' argument. * go32-nat.c (go32_terminal_ours): Add 'self' argument. 2014-02-19 Pedro Alves Tom Tromey * target.h (struct target_ops) : Add argument. (target_terminal_ours_for_output): Add argument. * target.c (debug_to_terminal_ours_for_output): Add argument. (update_current_target): Update. * inflow.c (terminal_ours_for_output): Add 'self' argument. * inferior.h (terminal_ours_for_output): Add 'self' argument. * go32-nat.c (go32_terminal_ours): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_terminal_inferior): Add argument. (update_current_target): Update. * remote.c (remote_terminal_inferior): Add 'self' argument. * linux-nat.c (linux_nat_terminal_inferior): Add 'self' argument. * inflow.c (terminal_inferior): Add 'self' argument. * inferior.h (terminal_inferior): Add 'self' argument. * go32-nat.c (go32_terminal_inferior): Add 'self' argument. (go32_terminal_inferior): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_terminal_init): Add argument. * target.c (debug_to_terminal_init): Add argument. (update_current_target): Update. * inflow.c (terminal_init_inferior): Add 'self' argument. * inferior.h (terminal_init_inferior): Add 'self' argument. * go32-nat.c (go32_terminal_init): Add 'self' argument. * gnu-nat.c (gnu_terminal_init_inferior): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_can_accel_watchpoint_condition): Add argument. * target.c (debug_to_can_accel_watchpoint_condition): Add argument. (update_current_target): Update. * ppc-linux-nat.c (ppc_linux_can_accel_watchpoint_condition): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_region_ok_for_hw_watchpoint): Add argument. * target.c (debug_to_region_ok_for_hw_watchpoint): Add argument. (default_region_ok_for_hw_watchpoint): Add argument. * spu-multiarch.c (spu_region_ok_for_hw_watchpoint): Add argument. * s390-linux-nat.c (s390_region_ok_for_hw_watchpoint): Add 'self' argument. * remote.c (remote_region_ok_for_hw_watchpoint): Add 'self' argument. * procfs.c (procfs_region_ok_for_hw_watchpoint): Add 'self' argument. * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Add 'self' argument. * mips-linux-nat.c (mips_linux_region_ok_for_hw_watchpoint): Add 'self' argument. * inf-ttrace.c (inf_ttrace_region_ok_for_hw_watchpoint): Add 'self' argument. * i386-nat.c (i386_region_ok_for_watchpoint): Add 'self' argument. * arm-linux-nat.c (arm_linux_region_ok_for_hw_watchpoint): Add 'self' argument. * aarch64-linux-nat.c (aarch64_linux_region_ok_for_hw_watchpoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_insert_watchpoint): Add argument. * target.c (debug_to_insert_watchpoint): Add argument. (update_current_target): Update. * s390-linux-nat.c (s390_insert_watchpoint): Add 'self' argument. * remote.c (remote_insert_watchpoint): Add 'self' argument. * remote-mips.c (mips_insert_watchpoint): Add 'self' argument. * remote-m32r-sdi.c (m32r_insert_watchpoint): Add 'self' argument. * procfs.c (procfs_insert_watchpoint): Add 'self' argument. * ppc-linux-nat.c (ppc_linux_insert_watchpoint): Add 'self' argument. * nto-procfs.c (procfs_insert_hw_watchpoint): Add 'self' argument. (procfs_insert_hw_watchpoint): Add 'self' argument. * mips-linux-nat.c (mips_linux_insert_watchpoint): Add 'self' argument. * inf-ttrace.c (inf_ttrace_insert_watchpoint): Add 'self' argument. * ia64-linux-nat.c (ia64_linux_insert_watchpoint): Add 'self' argument. * i386-nat.c (i386_insert_watchpoint): Add 'self' argument. * arm-linux-nat.c (arm_linux_insert_watchpoint): Add 'self' argument. * aarch64-linux-nat.c (aarch64_linux_insert_watchpoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_remove_watchpoint): Add argument. * target.c (debug_to_remove_watchpoint): Add argument. (update_current_target): Update. * s390-linux-nat.c (s390_remove_watchpoint): Add 'self' argument. * remote.c (remote_remove_watchpoint): Add 'self' argument. * remote-mips.c (mips_remove_watchpoint): Add 'self' argument. * remote-m32r-sdi.c (m32r_remove_watchpoint): Add 'self' argument. * procfs.c (procfs_remove_watchpoint): Add 'self' argument. * ppc-linux-nat.c (ppc_linux_remove_watchpoint): Add 'self' argument. * nto-procfs.c (procfs_remove_hw_watchpoint): Add 'self' argument. * mips-linux-nat.c (mips_linux_remove_watchpoint): Add 'self' argument. * inf-ttrace.c (inf_ttrace_remove_watchpoint): Add 'self' argument. * ia64-linux-nat.c (ia64_linux_remove_watchpoint): Add 'self' argument. * i386-nat.c (i386_remove_watchpoint): Add 'self' argument. * arm-linux-nat.c (arm_linux_remove_watchpoint): Add 'self' argument. * aarch64-linux-nat.c (aarch64_linux_remove_watchpoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_remove_hw_breakpoint): Add argument. * target.c (debug_to_remove_hw_breakpoint): Add argument. (update_current_target): Update. * remote.c (remote_remove_hw_breakpoint): Add 'self' argument. * ppc-linux-nat.c (ppc_linux_remove_hw_breakpoint): Add 'self' argument. * i386-nat.c (i386_remove_hw_breakpoint): Add 'self' argument. * arm-linux-nat.c (arm_linux_remove_hw_breakpoint): Add 'self' argument. * aarch64-linux-nat.c (aarch64_linux_remove_hw_breakpoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_insert_hw_breakpoint): Add argument. * target.c (debug_to_insert_hw_breakpoint): Add argument. (update_current_target): Update. * remote.c (remote_insert_hw_breakpoint): Add 'self' argument. * ppc-linux-nat.c (ppc_linux_insert_hw_breakpoint): Add 'self' argument. * nto-procfs.c (procfs_insert_hw_breakpoint): Add 'self' argument. * i386-nat.c (i386_insert_hw_breakpoint): Add 'self' argument. * arm-linux-nat.c (arm_linux_insert_hw_breakpoint): Add 'self' argument. * aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_can_use_hardware_watchpoint): Add argument. * target.c (debug_to_can_use_hw_breakpoint): Add argument. (update_current_target): Update. * spu-linux-nat.c (spu_can_use_hw_breakpoint): Add 'self' argument. * s390-linux-nat.c (s390_can_use_hw_breakpoint): Add 'self' argument. * remote.c (remote_check_watch_resources): Add 'self' argument. * remote-mips.c (mips_can_use_watchpoint): Add 'self' argument. * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint): Add 'self' argument. * procfs.c (procfs_can_use_hw_breakpoint): Add 'self' argument. * ppc-linux-nat.c (ppc_linux_can_use_hw_breakpoint): Add 'self' argument. * nto-procfs.c (procfs_can_use_hw_breakpoint): Add 'self' argument. * mips-linux-nat.c (mips_linux_can_use_hw_breakpoint): Add 'self' argument. * inf-ttrace.c (inf_ttrace_can_use_hw_breakpoint): Add 'self' argument. * ia64-linux-nat.c (ia64_linux_can_use_hw_breakpoint): Add 'self' argument. * ia64-hpux-nat.c (ia64_hpux_can_use_hw_breakpoint): Add 'self' argument. * i386-nat.c (i386_can_use_hw_breakpoint): Add 'self' argument. * arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Add 'self' argument. * aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_post_attach): Add argument. * target.c (debug_to_post_attach): Add argument. (update_current_target): Update. * spu-linux-nat.c (spu_child_post_attach): Add 'self' argument. * nto-procfs.c (procfs_post_attach): Add 'self' argument. * linux-nat.c (linux_child_post_attach): Add 'self' argument. * inf-ptrace.c (inf_ptrace_post_attach): Add 'self' argument. * inf-child.c (inf_child_post_attach): Add 'self' argument. 2014-02-19 Tom Tromey * windows-nat.c (windows_close): Add 'self' argument. * tracepoint.c (tfile_close): Add 'self' argument. * target.h (struct target_ops) : Add argument. * target.c (target_close): Add argument. (update_current_target): Update. * remote.c (remote_close): Add 'self' argument. * remote-sim.c (gdbsim_close): Add 'self' argument. * remote-mips.c (mips_close): Add 'self' argument. * remote-m32r-sdi.c (m32r_close): Add 'self' argument. * record-full.c (record_full_close): Add 'self' argument. * record-btrace.c (record_btrace_close): Add 'self' argument. * monitor.h (monitor_close): Add 'self' argument. * monitor.c (monitor_close): Add 'self' argument. * mips-linux-nat.c (mips_linux_close): Add 'self' argument. * linux-nat.c (linux_nat_close): Add argument. * go32-nat.c (go32_close): Add 'self' argument. * exec.c (exec_close_1): Add 'self' argument. * ctf.c (ctf_close): Add 'self' argument. * corelow.c (core_close): Add 'self' argument. (core_close_cleanup): Update. * bsd-uthread.c (bsd_uthread_close): Add 'self' argument. * bsd-kvm.c (bsd_kvm_close): Add 'self' argument. 2014-02-19 Tom Tromey * remote.c (remote_load): New function. (init_remote_ops): Use it. 2014-02-19 Tom Tromey * common/linux-btrace.c (linux_supports_btrace): Add "ops" argument. * common/linux-btrace.h (linux_supports_btrace): Update. * remote.c (remote_supports_btrace): Add "self" argument. * target-delegates.c: Rebuild. * target.c (target_supports_btrace): Remove. * target.h (struct target_ops) : Add target_ops argument. (target_supports_btrace): New define. 2014-02-19 Tom Tromey * record-full.c (record_full_beneath_to_resume_ops) (record_full_beneath_to_resume, record_full_beneath_to_wait_ops) (record_full_beneath_to_wait) (record_full_beneath_to_store_registers_ops) (record_full_beneath_to_store_registers) (record_full_beneath_to_xfer_partial_ops) (record_full_beneath_to_xfer_partial) (record_full_beneath_to_insert_breakpoint_ops) (record_full_beneath_to_insert_breakpoint) (record_full_beneath_to_remove_breakpoint_ops) (record_full_beneath_to_remove_breakpoint) (record_full_beneath_to_stopped_by_watchpoint) (record_full_beneath_to_stopped_data_address) (record_full_beneath_to_async, tmp_to_resume_ops, tmp_to_resume) (tmp_to_wait_ops, tmp_to_wait, tmp_to_store_registers_ops) (tmp_to_store_registers, tmp_to_xfer_partial_ops) (tmp_to_xfer_partial, tmp_to_instmp_to_insert_breakpoint_ops) (tmp_to_insert_breakpoint, tmp_to_remove_breakpoint_ops) (tmp_to_remove_breakpoint, tmp_to_stopped_by_watchpoint) (tmp_to_stopped_data_address, tmp_to_async): Remove. (record_full_open_1, record_full_open): Update. Use RECORD_IS_USED. (record_full_resume, record_full_wait_1) (record_full_stopped_by_watchpoint, record_full_stopped_data_address) (record_full_store_registers, record_full_xfer_partial) (record_full_insert_breakpoint, record_full_remove_breakpoint) (record_full_async, record_full_core_xfer_partial): Use target delegation. * target-delegates.c: Rebuild. * target.c (current_xfer_partial): Remove. (update_current_target): Do not INHERIT or de_fault to_insert_breakpoint, to_remove_breakpoint, to_stopped_data_address, to_stopped_by_watchpoint, to_can_async_p, to_is_async_p, to_async. Do not set to_xfer_partial field. (default_xfer_partial): Simplify. (current_xfer_partial): Remove. (target_wait, target_resume): Simplify. (find_default_can_async_p, find_default_is_async_p): Update. (init_dummy_target): Don't set to_can_async_p, to_is_async_p, to_xfer_partial, to_stopped_by_watchpoint, to_stopped_data_address. (target_store_registers): Simplify. (forward_target_remove_breakpoint) (forward_target_insert_breakpoint): Remove. (target_remove_breakpoint, target_insert_breakpoint) (debug_to_insert_breakpoint, debug_to_remove_breakpoint): Update. * target.h (struct target_ops) : Add TARGET_DEFAULT markup. (forward_target_remove_breakpoint) (forward_target_insert_breakpoint): Remove. * record-btrace.c (record_btrace_remove_breakpoint): Delegate directly. (record_btrace_insert_breakpoint): Delegate directly. 2014-02-19 Tom Tromey PR build/7701: * target-delegates.c: New file. * target.c: Include target-delegates.c. (init_dummy_target): Call install_dummy_methods. (complete_target_initialization): Call install_delegators. * target.h (TARGET_DEFAULT_IGNORE, TARGET_DEFAULT_NORETURN) (TARGET_DEFAULT_RETURN, TARGET_DEFAULT_FUNC): New defines. * make-target-delegates: New file. 2014-02-19 Tom Tromey * record.c (find_record_target): Use find_target_at. * target.c (find_target_at): New function. * target.h (find_target_at): Declare. 2014-02-19 Tom Tromey * aarch64-linux-nat.c (aarch64_linux_stopped_by_watchpoint): Add 'ops' argument. * arm-linux-nat.c (arm_linux_stopped_by_watchpoint): Add 'ops' argument. * i386-nat.c (i386_stopped_by_watchpoint): Add 'ops' argument. * ia64-linux-nat.c (ia64_linux_stopped_by_watchpoint): Add 'ops' argument. * inf-ttrace.c (inf_ttrace_stopped_by_watchpoint): Add 'ops' argument. * linux-nat.c (save_sigtrap): Update. (linux_nat_stopped_by_watchpoint, linux_nat_is_async_p) (linux_nat_can_async_p, linux_nat_async): Add 'ops' argument. (linux_nat_close): Update. * mips-linux-nat.c (mips_linux_stopped_by_watchpoint): Add 'ops' argument. * ppc-linux-nat.c (ppc_linux_stopped_by_watchpoint): Add 'ops' argument. * procfs.c (procfs_stopped_by_watchpoint): Add 'ops' argument. * record-full.c (record_full_beneath_to_stopped_by_watchpoint) (record_full_beneath_to_async, tmp_to_stopped_by_watchpoint) (tmp_to_async): Add 'ops' argument. (record_full_stopped_by_watchpoint, record_full_async) (record_full_can_async_p, record_full_is_async_p): Add 'ops' argument. * remote-m32r-sdi.c (m32r_insert_breakpoint, m32r_remove_breakpoint) (m32r_stopped_by_watchpoint): Add 'ops' argument. * remote-mips.c (mips_stopped_by_watchpoint): Add 'ops' argument. * remote.c (remote_stopped_by_watchpoint_p, remote_can_async_p) (remote_is_async_p, remote_async): Add 'ops' argument. (remote_stopped_data_address): Update. * s390-nat.c (s390_stopped_by_watchpoint): Add 'ops' argument. * target.c (update_current_target) (find_default_can_async_p, find_default_is_async_p): Update. (init_dummy_target): Update. (debug_to_stopped_by_watchpoint): Add 'ops' argument. * target.h (struct target_ops) : Add 'ops' argument. (target_can_async_p, target_is_async_p, target_async) (target_stopped_by_watchpoint): Update. 2014-02-19 Yao Qi PR gdb/16220 * gdbarch.sh: Remove startup_gdbarch. * gdbarch.c: Regenerated. * gdbarch.h: Likewise. 2014-02-17 Kevin Buettner * rl78-tdep.c (rl78_g10_register_name): New function. (rl78_return_value): Add g10 support. (rl78_gdbarch_init): Register rl78_g10_register_name for the g10. 2014-02-17 Doug Evans * Makefile.in (SUBDIR_GUILE_OBS): Resort alphabetically. (SUBDIR_GUILE_SRCS): Ditto. (scm-gsmob.o): Ditto. 2014-02-17 Yao Qi * gnu-nat.c (ILL_RPC): Declare defined function. 2014-02-17 Yao Qi * gnu-nat.c (gnu_read_inferior): Change 'copy_count' type to mach_msg_type_number_t. (gnu_write_inferior): Likewise. 2014-02-17 Yao Qi * gnu-nat.c (proc_get_exception_port): Use 'lu' insetad of 'd' in format string. (proc_steal_exc_port, make_proc, inf_set_pid): Likewise. (inf_validate_procs, inf_signal): Likewise. (S_exception_raise_request): Likewise. (do_mach_notify_dead_name): Likewise. (steal_exc_port): Likewise. (gnu_read_inferior): Change 'copy_count''s type to mach_msg_type_number_t. (gnu_write_inferior): Likewise. Use 'lx' instead of 'x' in format string. 2014-02-16 Thomas Schwinge * gnu-nat.c (struct inf): Change pending_execs member to a 1-bit flag. Adjust all users; in particular... (gnu_wait): ..., don't decrement its value in here... (gnu_create_inferior): ..., and instead set the flag in here, around the startup_inferior call, and call that one with START_INFERIOR_TRAPS_EXPECTED. * gnu-nat.c (ill_rpc): Remove function; replaced with this... (ILL_RPC): ... new macro. (do_mach_notify_no_senders, do_mach_notify_port_deleted) (do_mach_notify_msg_accepted, do_mach_notify_port_destroyed) (do_mach_notify_send_once, S_proc_setmsgport_reply) (S_proc_getmsgport_reply, S_msg_sig_post_reply): Generate stub functions with ILL_RPC macro. (S_proc_pid2task_reply, S_proc_task2pid_reply) (S_proc_task2proc_reply, S_proc_proc2task_reply) (S_proc_pid2proc_reply, S_proc_getprocinfo_reply) (S_proc_getprocargs_reply, S_proc_getprocenv_reply) (S_proc_getloginid_reply, S_proc_getloginpids_reply) (S_proc_getlogin_reply, S_proc_getsid_reply) (S_proc_getsessionpgids_reply, S_proc_getsessionpids_reply) (S_proc_getsidport_reply, S_proc_getpgrp_reply) (S_proc_getpgrppids_reply, S_proc_get_tty_reply) (S_proc_getnports_reply, S_proc_is_important_reply) (S_proc_get_code_reply): New stub functions, generated with ILL_RPC macro. * reply_mig_hack.awk: In phase 5, keep going if we have not yet collected the type check structures. * reply_mig_hack.awk: Don't expect to see the auto keyword. 2014-02-14 Doug Evans * target.c (target_write_partial): Fix result type. 2014-02-14 Jose E. Marchesi * sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Register the proper offsets to access fpregset_t. 2014-02-13 Sanimir Agovic * cris-tdep.c (cris_supply_gregset): Remove zerobuf. (_initialize_cris_tdep): Remove cris_set_cmdlist, cris_show_cmdlist. * h8300-tdep.c (setmachinelist): Remove global. * hppa-tdep.c (hppa_sigtramp): Remove global. * mipsnbsd-tdep.c (sigtramp_retcode_mipsel, sigtramp_retcode_mipseb RETCODE_NWORDS, RETCODE_SIZE): Wrap code with #if 0. * ravenscar-thread.c (update_target_observer): Remove global. * rs6000-tdep.c (rs6000_gdbarch_init): Remove segment_regs. 2014-02-12 Tom Tromey * common/rsp-low.c: Update comments. * common/rsp-low.h: Update comments. 2014-02-12 Tom Tromey * common/rsp-low.c (convert_ascii_to_int): Remove. * common/rsp-low.h (convert_ascii_to_int): Don't declare. 2014-02-12 Tom Tromey * common/rsp-low.h (unhexify): Don't declare. * common/rsp-low.c (unhexify): Remove. 2014-02-12 Tom Tromey * common/rsp-low.h (convert_int_to_ascii): Don't declare. * common/rsp-low.c (convert_int_to_ascii): Remove. 2014-02-12 Tom Tromey * common/rsp-low.h (hexify): Don't declare. * common/rsp-low.c (hexify): Remove. 2014-02-12 Tom Tromey * common/rsp-low.c (hexify): Never take strlen of argument. 2014-02-12 Tom Tromey * common/rsp-low.c (bin2hex): Never take strlen of argument. * remote.c (extended_remote_run, remote_rcmd) (remote_download_trace_state_variable, remote_save_trace_data) (remote_set_trace_notes): Update. * tracepoint.c (encode_source_string, tfile_write_status) (tfile_write_uploaded_tsv): Update. 2014-02-12 Tom Tromey * tracepoint.c: Include rsp-low.h. * remote.h (hex2bin, bin2hex, unpack_varlen_hex): Don't declare. * remote.c: Include rsp-low.h. (hexchars, ishex, unpack_varlen_hex, pack_nibble, pack_hex_byte) (fromhex, hex2bin, tohex, bin2hex, remote_escape_output) (remote_unescape_input): Move to common/rsp-low.c. * common/rsp-low.h: New file. * common/rsp-low.c: New file. * Makefile.in (SFILES): Add common/rsp-low.c. (HFILES_NO_SRCDIR): Add common/rsp-low.h. (COMMON_OBS): Add rsp-low.o. (rsp-low.o): New target. 2014-02-12 Tom Tromey * utils.h: Include print-utils.h. (host_address_to_string, plongest, pulongest, phex, phex_nz) (int_string, core_addr_to_string, core_addr_to_string_nz) (hex_string, hex_string_custom): Don't declare. * utils.c (NUMCELLS, CELLSIZE, get_cell, decimal2str, pulongest) (plongest, thirty_two, phex, phex_nz, octal2str, hex_string) (hex_string_custom, int_string, core_addr_to_string) (core_addr_to_string_nz, host_address_to_string): Move to common/print-utils.c. * common/print-utils.h: New file. * common/print-utils.c: New file * Makefile.in (SFILES): Add common/print-utils.c. (HFILES_NO_SRCDIR): Add common/print-utils.h. (COMMON_OBS): Add print-utils.o. (print-utils.o): New target. 2014-02-12 Tom Tromey * nios2-tdep.c (nios2_stub_frame_base_address): Remove. 2014-02-12 Mark Kettenis * sparc64obsd-tdep.c (sparc64obsd_init_abi): Call obsd_init_abi. 2014-02-12 Mark Kettenis * inf-ptrace.c (inf_ptrace_xfer_partial): Return TARGET_XFER_EOF if a PT_IO ptrace request returns sucessfully but indicates that 0 bytes were transferred. 2014-02-12 Pedro Alves Kevin Buettner * gnu-v3-abi.c (build_gdb_vtable_type): Return a type marked with TYPE_INSTANCE_FLAG_CODE_SPACE. 2014-02-12 Pedro Alves * h8300-tdep.c (pseudo_from_raw_register) (raw_from_pseudo_register): New functions. (h8300_pseudo_register_read, h8300_pseudo_register_write): Use them. 2014-02-12 Pedro Alves * h8300-tdep.c (h8300_register_sim_regno): New function. (h8300_gdbarch_init): Install h8300_register_sim_regno as gdbarch_register_sim_regno hook. 2014-02-12 Sanimir Agovic * nios2-tdep.c (nios2_stub_frame_base): Remove global. 2014-02-12 Sanimir Agovic * tic6x-tdep.c (tic6x_gdbarch_init): Call frame_base_set_default. 2014-02-12 Mark Kettenis * obsd-tdep.h (obsd_init_abi): New prototype. * obsd-tdep.c: Define enum with OpenBSD signal numbers. (obsd_gdb_signal_from_target, obsd_gdb_signal_to_target) (obsd_init_abi): New functions. * i386obsd-tdep.c: Include "obsd-tdep.h". (i386obsd_init_abi): Call obsd_init_abi. * amd64obsd-tdep.c: Include "obsd-tdep.h". (amd64obsd_init_abi): Call obsd_init_abi. * configure.tgt (i[34567]86-*-openbsd*, x86_64-*-openbsd*): Add obsd-tdep.c to gdb_target_obs. 2014-02-11 Jose E. Marchesi * sparc64-tdep.c (sparc64_store_arguments): Do not align complex double float arguments to 16-byte in the argument slots. 2014-02-11 Doug Evans * configure.ac: Don't crash if pkg-config is not found and guile wasn't explicitly requested. Use AC_MSG_ERROR instead of AC_ERROR in guile checks. * configure: Regenerate. 2014-02-11 Yao Qi * aix-thread.c (aix_thread_xfer_partial): Update comments. * auxv.c (procfs_xfer_auxv, memory_xfer_auxv): Likewise. * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise. * gnu-nat.c (gnu_xfer_memory): Likewise. * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise. * rs6000-nat.c (rs6000_xfer_partial): Likewise. * sparc-nat.c (sparc_xfer_wcookie): Likewise. * spu-linux-nat.c (spu_proc_xfer_spu): Likewise. 2014-02-11 Yao Qi * target.h (enum target_xfer_error): Rename to ... (enum target_xfer_status): ... it. New. All users updated. (enum target_xfer_status) , : New. (TARGET_XFER_STATUS_ERROR_P): New macro. (target_xfer_error_to_string): Remove declaration. (target_xfer_status_to_string): Declare. (target_xfer_partial_ftype): Adjust it. (struct target_ops) : Return target_xfer_status. Add argument xfered_len. Update comments. * target.c (target_xfer_error_to_string): Rename to ... (target_xfer_status_to_string): ... it. New. All callers updated. (target_read_live_memory): Likewise. Call target_xfer_partial instead of target_read. (memory_xfer_live_readonly_partial): Return target_xfer_status. Add argument xfered_len. (raw_memory_xfer_partial): Likewise. (memory_xfer_partial_1): Likewise. (memory_xfer_partial): Likewise. (target_xfer_partial): Likewise. Check *XFERED_LEN is set properly. Update debug message. (default_xfer_partial, current_xfer_partial): Likewise. (target_write_partial): Likewise. (target_read_partial): Likewise. All callers updated. (read_whatever_is_readable): Likewise. (target_write_with_progress): Likewise. (target_read_alloc_1): Likewise. * aix-thread.c (aix_thread_xfer_partial): Likewise. * auxv.c (procfs_xfer_auxv): Likewise. (ld_so_xfer_auxv, memory_xfer_auxv): Likewise. * bfd-target.c (target_bfd_xfer_partial): Likewise. * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise. * bsd-uthread.c (bsd_uthread_xfer_partia): Likewise. * corefile.c (read_memory): Adjust. * corelow.c (core_xfer_partial): Likewise. * ctf.c (ctf_xfer_partial): Likewise. * darwin-nat.c (darwin_read_dyld_info): Likewise. All callers updated. (darwin_xfer_partial): Likewise. * exec.c (section_table_xfer_memory_partial): Likewise. All callers updated. (exec_xfer_partial): Likewise. * exec.h (section_table_xfer_memory_partial): Update declaration. * gnu-nat.c (gnu_xfer_memory): Likewise. Assert 'res' is not negative. (gnu_xfer_partial): Likewise. * ia64-hpux-nat.c (ia64_hpux_xfer_memory_no_bs): Likewise. (ia64_hpux_xfer_memory, ia64_hpux_xfer_uregs): Likewise. (ia64_hpux_xfer_solib_got): Likewise. * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise. Change type of 'partial_len' to ULONGEST. * inf-ttrace.c (inf_ttrace_xfer_partial): Likewise. * linux-nat.c (linux_xfer_siginfo ): Likewise. (linux_nat_xfer_partial): Likewise. (linux_proc_xfer_partial, linux_xfer_partial): Likewise. (linux_proc_xfer_spu, linux_nat_xfer_osdata): Likewise. * monitor.c (monitor_xfer_memory): Likewise. (monitor_xfer_partial): Likewise. * procfs.c (procfs_xfer_partial): Likewise. * record-btrace.c (record_btrace_xfer_partial): Likewise. * record-full.c (record_full_xfer_partial): Likewise. (record_full_core_xfer_partial): Likewise. * remote-sim.c (gdbsim_xfer_memory): Likewise. (gdbsim_xfer_partial): Likewise. * remote.c (remote_write_bytes_aux): Likewise. All callers updated. (remote_write_bytes, remote_read_bytes): Likewise. All callers updated. (remote_flash_erase): Likewise. All callers updated. (remote_write_qxfer): Likewise. All callers updated. (remote_read_qxfer): Likewise. All callers updated. (remote_xfer_partial): Likewise. * rs6000-nat.c (rs6000_xfer_partial): Likewise. (rs6000_xfer_shared_libraries): Likewise. * sol-thread.c (sol_thread_xfer_partial): Likewise. (sol_thread_xfer_partial): Likewise. * sparc-nat.c (sparc_xfer_wcookie): Likewise. (sparc_xfer_partial): Likewise. * spu-linux-nat.c (spu_proc_xfer_spu): Likewise. All callers updated. (spu_xfer_partial): Likewise. * spu-multiarch.c (spu_xfer_partial): Likewise. * tracepoint.c (tfile_xfer_partial): Likewise. * windows-nat.c (windows_xfer_memory): Likewise. (windows_xfer_shared_libraries): Likewise. (windows_xfer_partial): Likewise. * valprint.c: Replace 'target_xfer_error' with 'target_xfer_status' in comments. 2014-02-11 Simon Marchi (tiny patch) Checked in by Joel Brobecker . * mi/mi-main.c (mi_cmd_data_write_memory_bytes): Fix comment. 2014-02-11 Joel Brobecker * symfile-debug.c (debug_qf_expand_symtabs_matching): Reformat function parameters. 2014-02-10 Will Newton * elfread.c (elf_rel_plt_read): Look for a .got section if looking up .got.plt fails. (elf_gnu_ifunc_resolve_by_got): Call gdbarch_addr_bits_remove on address passed to elf_gnu_ifunc_record_cache. (elf_gnu_ifunc_resolve_addr): Likewise. (elf_gnu_ifunc_resolver_return_stop): Likewise. 2014-02-10 Jose E. Marchesi * sparc-tdep.c (sparc_in_function_epilogue_p): New function. (X_RETTURN): New macro. * sparc-tdep.h: sparc_in_function_epilogue_p prototype. * sparc64-tdep.c (sparc64_init_abi): Hook sparc_in_function_epilogue_p. 2014-02-10 Gary Benson * symfile-debug.c (debug_qf_expand_symtabs_matching): Rename name_matcher to symbol_matcher. 2014-02-10 Gary Benson * symfile-debug.c (debug_qf_expand_symtabs_matching): Use expand_symtabs_file_matcher_ftype and expand_symtabs_symbol_matcher_ftype. 2014-02-10 Joel Brobecker * ada-lang.c (struct cache_entry, HASH_SIZE): Move definition up. (struct ada_symbol_cache): New. (ada_free_symbol_cache): Forward declare. (struct ada_pspace_data): New. (ada_pspace_data_handle): New static global. (get_ada_pspace_data, ada_pspace_data_cleanup) (ada_init_symbol_cache, ada_free_symbol_cache): New functions. (cache_space, cache): Delete, now folded inside struct ada_pspace_data. (ada_get_symbol_cache): New function. (ada_clear_symbol_cache, find_entry, cache_symbol): Adjust implementation. (_initialize_ada_language): Remove initialization of cache_space. Move call to observer_attach_inferior_exit up, grouping it with the other observer registrations inside this function. Rename command to be more general. Add call to register_program_space_data_with_cleanup. 2014-02-10 Joel Brobecker * ada-tasks.c (ada_tasks_new_objfile_observer): Renames ada_new_objfile_observer. (ada_tasks_normal_stop_observer): Renames ada_normal_stop_observer. (_initialize_tasks): Update uses of ada_new_objfile_observer and ada_tasks_normal_stop_observer. 2014-02-10 Joel Brobecker * ada-lang.c (ada_evaluate_subexp): Set the type of the value returned by the 'Length attribute to integer. 2014-02-10 Joel Brobecker * ada-lang.c (_initialize_ada_language): Initialize cache_space obstack. 2014-02-10 Joel Brobecker * ada-lang.c (HASH_SIZE): New macro. (struct cache_entry): New type. (cache_space, cache): New static globals. (ada_clear_symbol_cache, find_entry): New functions. (lookup_cached_symbol, cache_symbol): Implement. (ada_new_objfile_observer, ada_free_objfile_observer): New. (_initialize_ada_language): Attach ada_new_objfile_observer and ada_free_objfile_observer. 2014-02-10 Joel Brobecker * ada-lang.c (ada_add_block_symbols, add_defn_to_vec) (lookup_cached_symbol, ada_add_local_symbols): Add "const" to struct block * parameter. (ada_lookup_symbol_list_worker): Constify local variable "block". Remove cast which is no longer necessary. 2014-02-10 Doug Evans Add Guile as an extension language. * NEWS: Mention Guile scripting. * Makefile.in (SUBDIR_GUILE_OBS): New variable. (SUBDIR_GUILE_SRCS, SUBDIR_GUILE_DEPS): New variables (SUBDIR_GUILE_LDFLAGS, SUBDIR_GUILE_CFLAGS): New variables. (INTERNAL_CPPFLAGS): Add GUILE_CPPFLAGS. (CLIBS): Add GUILE_LIBS. (install-guile): New rule. (guile.o): New rule. (scm-arch.o, scm-auto-load.o, scm-block.o): New rules. (scm-breakpoint.o, scm-disasm.o, scm-exception.o): New rules. (scm-frame.o, scm-iterator.o, scm-lazy-string.o): New rules. (scm-math.o, scm-objfile.o, scm-ports.o): New rules. (scm-pretty-print.o, scm-safe-call.o, scm-gsmob.o): New rules. (scm-string.o, scm-symbol.o, scm-symtab.o): New rules. (scm-type.o, scm-utils.o, scm-value.o): New rules. * configure.ac: New option --with-guile. * configure: Regenerate. * config.in: Regenerate. * auto-load.c: Remove #include "python/python.h". Add #include "gdb/section-scripts.h". (source_section_scripts): Handle Guile scripts. (_initialize_auto_load): Add name of Guile objfile script to scripts-directory help text. * breakpoint.c (condition_command): Tweak comment to include Scheme. * breakpoint.h (gdbscm_breakpoint_object): Add forward decl. (struct breakpoint): New member scm_bp_object. * defs.h (enum command_control_type): New value guile_control. * cli/cli-cmds.c: Remove #include "python/python.h". Add #include "extension.h". (show_user): Update comment. (_initialize_cli_cmds): Update help text for "show user". Update help text for max-user-call-depth. * cli/cli-script.c: Remove #include "python/python.h". Add #include "extension.h". (multi_line_command_p): Add guile_control. (print_command_lines): Handle guile_control. (execute_control_command, recurse_read_control_structure): Ditto. (process_next_line): Recognize "guile" commands. * disasm.c (gdb_disassemble_info): Make non-static. * disasm.h: #include "dis-asm.h". (struct gdbarch): Add forward decl. (gdb_disassemble_info): Declare. * extension.c: #include "guile/guile.h". (extension_languages): Add guile. (get_ext_lang_defn): Handle EXT_LANG_GDB. * extension.h (enum extension_language): New value EXT_LANG_GUILE. * gdbtypes.c (get_unsigned_type_max): New function. (get_signed_type_minmax): New function. * gdbtypes.h (get_unsigned_type_max): Declare. (get_signed_type_minmax): Declare. * guile/README: New file. * guile/guile-internal.h: New file. * guile/guile.c: New file. * guile/guile.h: New file. * guile/scm-arch.c: New file. * guile/scm-auto-load.c: New file. * guile/scm-block.c: New file. * guile/scm-breakpoint.c: New file. * guile/scm-disasm.c: New file. * guile/scm-exception.c: New file. * guile/scm-frame.c: New file. * guile/scm-gsmob.c: New file. * guile/scm-iterator.c: New file. * guile/scm-lazy-string.c: New file. * guile/scm-math.c: New file. * guile/scm-objfile.c: New file. * guile/scm-ports.c: New file. * guile/scm-pretty-print.c: New file. * guile/scm-safe-call.c: New file. * guile/scm-string.c: New file. * guile/scm-symbol.c: New file. * guile/scm-symtab.c: New file. * guile/scm-type.c: New file. * guile/scm-utils.c: New file. * guile/scm-value.c: New file. * guile/lib/gdb.scm: New file. * guile/lib/gdb/boot.scm: New file. * guile/lib/gdb/experimental.scm: New file. * guile/lib/gdb/init.scm: New file. * guile/lib/gdb/iterator.scm: New file. * guile/lib/gdb/printing.scm: New file. * guile/lib/gdb/types.scm: New file. * data-directory/Makefile.in (GUILE_SRCDIR): New variable. (VPATH): Add $(GUILE_SRCDIR). (GUILE_DIR): New variable. (GUILE_INSTALL_DIR, GUILE_FILES): New variables. (all): Add stamp-guile dependency. (stamp-guile): New rule. (clean-guile, install-guile, uninstall-guile): New rules. (install-only): Add install-guile dependency. (uninstall): Add uninstall-guile dependency. (clean): Add clean-guile dependency. 2014-02-09 Doug Evans Revert this patch (which I approved, mea culpa). 2014-02-08 Mark Kettenis * Makefile.in (all-lib): Remove. ($(LIBGNU) $(GNULIB_H)): Replace with gits of remove all-lib target. 2014-02-09 Jan Kratochvil Fix Python stack corruption. * python/py-linetable.c (ltpy_get_pcs_for_line, ltpy_has_line): Use gdb_py_longest. 2014-02-08 Mark Kettenis * Makefile.in (all-lib): Remove. ($(LIBGNU) $(GNULIB_H)): Replace with gits of remove all-lib target. 2014-02-07 Doug Evans * extension-priv.h (extension_language_script_ops): Add comment. (extension_language_ops): Add comment. (active_ext_lang_state): Fix typo in comment. 2014-02-07 Pedro Alves PR breakpoints/16292 * infrun.c (handle_signal_stop) : Switch back to the stepping thread. 2014-02-07 Yao Qi * target.c (target_xfer_partial): Return zero if LEN is zero. 2014-02-07 Yao Qi * auxv.c (procfs_xfer_auxv): Replace -1 with TARGET_XFER_E_IO. (ld_so_xfer_auxv): Likewise. * bfd-target.c (target_bfd_xfer_partial): Likewise. * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise. * corelow.c (core_xfer_partial): Likewise. * ctf.c (ctf_xfer_partial): Likewise. * darwin-nat.c (darwin_read_dyld_info): Likewise. (darwin_xfer_partial): Likewise. * exec.c (exec_xfer_partial): Likewise. * gnu-nat.c (gnu_xfer_partial): Likewise. * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): Likewise. * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise. * inf-ttrace.c (inf_ttrace_xfer_partial): Likewise. * linux-nat.c (linux_xfer_siginfo): Likewise. (linux_proc_xfer_spu): Likewise. * procfs.c (procfs_xfer_partial): Likewise. * record-full.c (record_full_xfer_partial): Likewise. (record_full_core_xfer_partial): Likewise. * remote-sim.c (gdbsim_xfer_partial): Likewise. * remote.c (remote_write_qxfer): Likewise. (remote_write_qxfer, remote_read_qxfer): Likewise. (remote_xfer_partial): Likewise. * rs6000-nat.c (rs6000_xfer_partial): Likewise. (rs6000_xfer_shared_libraries): Likewise. * sparc-nat.c (sparc_xfer_wcookie): Likewise. * spu-linux-nat.c (spu_proc_xfer_spu): Likewise. (spu_xfer_partial): Likewise. * target.c (memory_xfer_partial_1): Likewise. * tracepoint.c (tfile_xfer_partial): Likewise. * windows-nat.c (windows_xfer_shared_libraries): Likewise. (windows_xfer_partial): Likewise. 2014-02-07 Yao Qi * gdbarch.sh (core_xfer_shared_libraries): Returns ULONGEST. Add comments. (core_xfer_shared_libraries_aix): Likewise. * gdbarch.c, gdbarch.h: Regenerated. * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries): Return ULONGEST. Change 'len_avail' type to ULONGEST. * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise. * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update declaration. (rs6000_aix_core_xfer_shared_libraries_aix): Return ULONGEST. 2014-02-07 Yao Qi * corefile.c (memory_error): Get 'exception' from ERR and pass 'exception' to throw_error. 2014-02-06 Doug Evans * configure.ac (libpython checking): Remove all but python.o from CONFIG_OBS. Remove all but python.c from CONFIG_SRCS. * configure: Regenerate. * Makefile.in (SFILES): Add extension.c. (HFILES_NO_SRCDIR): Add extension.h, extension-priv.h (COMMON_OBS): Add extension.o. * extension.h: New file. * extension-priv.h: New file. * extension.c: New file. * python/python-internal.h: #include "extension.h". (gdbpy_auto_load_enabled): Declare. (gdbpy_apply_val_pretty_printer): Declare. (gdbpy_apply_frame_filter): Declare. (gdbpy_preserve_values): Declare. (gdbpy_breakpoint_cond_says_stop): Declare. (gdbpy_breakpoint_has_cond): Declare. (void source_python_script_for_objfile): Delete. * python/python.c: #include "extension-priv.h". Delete inclusion of "observer.h". (extension_language_python): Moved here and renamed from script_language_python in py-auto-load.c. Redefined to be of type extension_language_defn. (python_extension_script_ops): New global. (python_extension_ops): New global. (struct python_env): New member previous_active. (restore_python_env): Call restore_active_ext_lang. (ensure_python_env): Call set_active_ext_lang. (gdbpy_clear_quit_flag): Renamed from clear_quit_flag, made static. New arg extlang. (gdbpy_set_quit_flag): Renamed from set_quit_flag, made static. New arg extlang. (gdbpy_check_quit_flag): Renamed from check_quit_flag, made static. New arg extlang. (gdbpy_eval_from_control_command): Renamed from eval_python_from_control_command, made static. New arg extlang. (gdbpy_source_script) Renamed from source_python_script, made static. New arg extlang. (gdbpy_before_prompt_hook): Renamed from before_prompt_hook. Change result to int. New arg extlang. (gdbpy_source_objfile_script): Renamed from source_python_script_for_objfile, made static. New arg extlang. (gdbpy_start_type_printers): Renamed from start_type_printers, made static. New args extlang, extlang_printers. Change result type to "void". (gdbpy_apply_type_printers): Renamed from apply_type_printers, made static. New arg extlang. Rename arg printers to extlang_printers and change type to ext_lang_type_printers *. (gdbpy_free_type_printers): Renamed from free_type_printers, made static. Replace argument arg with extlang, extlang_printers. (!HAVE_PYTHON, eval_python_from_control_command): Delete. (!HAVE_PYTHON, source_python_script): Delete. (!HAVE_PYTHON, gdbpy_should_stop): Delete. (!HAVE_PYTHON, gdbpy_breakpoint_has_py_cond): Delete. (!HAVE_PYTHON, start_type_printers): Delete. (!HAVE_PYTHON, apply_type_printers): Delete. (!HAVE_PYTHON, free_type_printers): Delete. (_initialize_python): Delete call to observer_attach_before_prompt. (finalize_python): Set/restore active extension language. (gdbpy_finish_initialization) Renamed from finish_python_initialization, made static. New arg extlang. (gdbpy_initialized): New function. * python/python.h: #include "extension.h". Delete #include "value.h", "mi/mi-cmds.h". (extension_language_python): Declare. (GDBPY_AUTO_FILE_NAME): Delete. (enum py_bt_status): Moved to extension.h and renamed to ext_lang_bt_status. (enum frame_filter_flags): Moved to extension.h. (enum py_frame_args): Moved to extension.h and renamed to ext_lang_frame_args. (finish_python_initialization): Delete. (eval_python_from_control_command): Delete. (source_python_script): Delete. (apply_val_pretty_printer): Delete. (apply_frame_filter): Delete. (preserve_python_values): Delete. (gdbpy_script_language_defn): Delete. (gdbpy_should_stop, gdbpy_breakpoint_has_py_cond): Delete. (start_type_printers, apply_type_printers, free_type_printers): Delete. * auto-load.c: #include "extension.h". (GDB_AUTO_FILE_NAME): Delete. (auto_load_gdb_scripts_enabled): Make public. New arg extlang. (script_language_gdb): Delete, moved to extension.c and renamed to extension_language_gdb. (source_gdb_script_for_objfile): Delete. (auto_load_pspace_info): New member unsupported_script_warning_printed. (loaded_script): Change type of language member to struct extension_language_defn *. (init_loaded_scripts_info): Initialize unsupported_script_warning_printed. (maybe_add_script): Make static. Change type of language arg to struct extension_language_defn *. (clear_section_scripts): Reset unsupported_script_warning_printed. (auto_load_objfile_script_1): Rewrite to use extension language API. (auto_load_objfile_script): Make public. Remove support-compiled-in and auto-load-enabled checks, moved to auto_load_scripts_for_objfile. (source_section_scripts): Rewrite to use extension language API. (load_auto_scripts_for_objfile): Rewrite to use auto_load_scripts_for_objfile. (collect_matching_scripts_data): Change type of language member to struct extension_language_defn *. (auto_load_info_scripts): Change type of language arg to struct extension_language_defn *. (unsupported_script_warning_print): New function. (script_not_found_warning_print): Make static. (_initialize_auto_load): Rewrite construction of scripts-directory help. * auto-load.h (struct objfile): Add forward decl. (struct script_language): Delete. (struct auto_load_pspace_info): Add forward decl. (struct extension_language_defn): Add forward decl. (maybe_add_script): Delete. (auto_load_objfile_script): Declare. (script_not_found_warning_print): Delete. (auto_load_info_scripts): Update prototype. (auto_load_gdb_scripts_enabled): Declare. * python/py-auto-load.c (gdbpy_auto_load_enabled): Renamed from auto_load_python_scripts_enabled and made public. (script_language_python): Delete, moved to python.c. (gdbpy_script_language_defn): Delete. (info_auto_load_python_scripts): Update to use extension_language_python. * breakpoint.c (condition_command): Replace call to gdbpy_breakpoint_has_py_cond with call to get_breakpoint_cond_ext_lang. (bpstat_check_breakpoint_conditions): Replace call to gdbpy_should_stop with call to breakpoint_ext_lang_cond_says_stop. * python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed from gdbpy_should_stop. Change result type to enum scr_bp_stop. New arg slang. Return SCR_BP_STOP_UNSET if py_bp_object is NULL. (gdbpy_breakpoint_has_cond): Renamed from gdbpy_breakpoint_has_py_cond. New arg slang. (local_setattro): Print name of extension language with existing stop condition. * valprint.c (val_print, value_print): Update to call apply_ext_lang_val_pretty_printer. * cp-valprint.c (cp_print_value): Update call to apply_ext_lang_val_pretty_printer. * python/py-prettyprint.c: Remove #ifdef HAVE_PYTHON. (gdbpy_apply_val_pretty_printer): Renamed from apply_val_pretty_printer. New arg extlang. (!HAVE_PYTHON, apply_val_pretty_printer): Delete. * cli/cli-cmds.c (source_script_from_stream): Rewrite to use extension language API. * cli/cli-script.c (execute_control_command): Update to call eval_ext_lang_from_control_command. * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Update to use enum ext_lang_bt_status values. Update call to apply_ext_lang_frame_filter. (mi_cmd_stack_list_locals): Ditto. (mi_cmd_stack_list_args): Ditto. (mi_cmd_stack_list_variables): Ditto. * mi/mi-main.c: Delete #include "python/python-internal.h". Add #include "extension.h". (mi_cmd_list_features): Replace reference to python internal variable gdb_python_initialized with call to ext_lang_initialized_p. * stack.c (backtrace_command_1): Update to use enum ext_lang_bt_status. Update to use enum ext_lang_frame_args. Update to call apply_ext_lang_frame_filter. * python/py-framefilter.c (extract_sym): Update to use enum ext_lang_bt_status. (extract_value, py_print_type, py_print_value): Ditto. (py_print_single_arg, enumerate_args, enumerate_locals): Ditto. (py_mi_print_variables, py_print_locals, py_print_args): Ditto. (py_print_frame): Ditto. (gdbpy_apply_frame_filter): Renamed from apply_frame_filter. New arg extlang. Update to use enum ext_lang_bt_status. * top.c (gdb_init): Delete #ifdef HAVE_PYTHON call to finish_python_initialization. Replace with call to finish_ext_lang_initialization. * typeprint.c (do_free_global_table): Update to call free_ext_lang_type_printers. (create_global_typedef_table): Update to call start_ext_lang_type_printers. (find_global_typedef): Update to call apply_ext_lang_type_printers. * typeprint.h (struct ext_lang_type_printers): Add forward decl. (type_print_options): Change type of global_printers from "void *" to "struct ext_lang_type_printers *". * value.c (preserve_values): Update to call preserve_ext_lang_values. * python/py-value.c: Remove #ifdef HAVE_PYTHON. (gdbpy_preserve_values): Renamed from preserve_python_values. New arg extlang. (!HAVE_PYTHON, preserve_python_values): Delete. * utils.c (quit_flag): Delete, moved to extension.c. (clear_quit_flag, set_quit_flag, check_quit_flag): Delete, moved to extension.c. * eval.c: Delete #include "python/python.h". * main.c: Delete #include "python/python.h". * defs.h: Update comment. 2014-02-06 Joel Brobecker GDB 7.7 released. 2014-02-05 Mark Kettenis * c-exp.y (YYPRINT, c_print_token): Only define if YYBISON is defined. 2014-02-05 Yao Qi * remote.c (remote_pass_signals): Remove local 'buf' and use rs->buf. (remote_program_signals): Likewise. 2014-02-05 Yao Qi * ctf.c: Include "inferior.h" and "gdbthread.h". (CTF_PID): A new macro. (ctf_open): Call inferior_appeared and add_thread_silent. (ctf_close): Call exit_inferior_silent and set inferior_ptid. (ctf_thread_alive): New function. (init_ctf_ops): Install ctf_thread_alive to to_thread_alive. 2014-02-05 Yao Qi Revert this patch: 2013-05-24 Yao Qi * tracepoint.c (TFILE_PID): Remove. (tfile_open): Don't add thread and inferior. (tfile_close): Don't set 'inferior_ptid'. Don't call exit_inferior_silent. (tfile_thread_alive): Remove. (init_tfile_ops): Don't set field 'to_thread_alive' of tfile_ops. 2014-02-04 Christian Eggers (tiny change) * remote.c (remote_start_remote): Call remote_check_symbols even if only symbol-file (not file) has been given. 2014-02-04 Ulrich Weigand  * gdbarch.sh (skip_entrypoint): New callback. * gdbarch.c, gdbarch.h: Regenerate. * symtab.c (skip_prologue_sal): Call gdbarch_skip_entrypoint. * infrun.c (fill_in_stop_func): Likewise. * ppc-linux-tdep.c: Include "elf/ppc64.h". (ppc_elfv2_elf_make_msymbol_special): New function. (ppc_elfv2_skip_entrypoint): Likewise. (ppc_linux_init_abi): Install them for ELFv2. 2014-02-04 Ulrich Weigand  * ppc-sysv-tdep.c (ppc64_aggregate_candidate): New routine. (ppc64_elfv2_abi_homogeneous_aggregate): Likewise. (ppc64_sysv_abi_push_param): Handle ELFv2 homogeneous structs. (ppc64_sysv_abi_return_value): Likewise. Also, handle small structures returned in GPRs. 2014-02-04 Ulrich Weigand  * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Use correct offset to the stack parameter list for the ELFv2 ABI. 2014-02-04 Ulrich Weigand  * ppc-linux-tdep.c (ppc_linux_init_abi): Only call set_gdbarch_convert_from_func_ptr_addr and set_gdbarch_elf_make_msymbol_special for ELFv1. * ppc-sysv-tdep.c (ppc64_sysv_abi_push_param): Only handle function descriptors on ELFv1. (ppc64_sysv_abi_push_dummy_call): Likewise. On ELFv2, set up r12 at function entry. 2014-02-04 Ulrich Weigand  * ppc-tdep.h (enum powerpc_elf_abi): New data type. (struct gdbarch_tdep): New member elf_abi. * rs6000-tdep.c: Include "elf/ppc64.h". (rs6000_gdbarch_init): Detect ELF ABI version. 2014-02-04 Ulrich Weigand  * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct order within a register pair holding a DFP 128-bit value on little-endian. (ppc64_sysv_abi_return_value_base): Likewise. * rs6000-tdep.c (dfp_pseudo_register_read): Likewise. (dfp_pseudo_register_write): Likewise. 2014-02-04 Ulrich Weigand  * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct offset on little-endian when passing _Decimal32. (ppc64_sysv_abi_return_value_base): Likewise for return values. 2014-02-04 Ulrich Weigand  * rs6000-tdep.c (efpr_pseudo_register_read): Use correct offset of the overlapped FP register within the VSX register on little- endian platforms. (efpr_pseudo_register_write): Likewise. 2014-02-04 Ulrich Weigand  * ppc-sysv-tdep.c (ppc64_sysv_abi_push_val): Use correct offset on little-endian when passing small structures. 2014-02-04 Ulrich Weigand  * ppc-sysv-tdep.c (get_decimal_float_return_value): Update comment. (struct ppc64_sysv_argpos): New data structure. (ppc64_sysv_abi_push_float): Remove. (ppc64_sysv_abi_push_val): New function. (ppc64_sysv_abi_push_integer): Likewise. (ppc64_sysv_abi_push_freg): Likewise. (ppc64_sysv_abi_push_vreg): Likewise. (ppc64_sysv_abi_push_param): Likewise. (ppc64_sysv_abi_push_dummy_call): Refactor to use those new routines. (ppc64_sysv_abi_return_value_base): New function. (ppc64_sysv_abi_return_value): Refactor to use it. 2014-02-04 Ulrich Weigand  * NEWS: Document new target powerpc64le-*-linux*. 2014-02-04 Mark Kettenis * sparc64obsd-tdep.c (sparc64obsd_gregset): New variable. (sparc64obsd_supply_gregset): Handle registers sets used in ELF core dumps. (sparc64obsd_init_abi): Adjust minimum size of the general purpose register set used in ELF core dumps. Add floating-point register set. 2014-02-03 Kevin Buettner * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Rewrite dwarf2_to_gdb[] table using symbolic constants. Adjust penultimate entry from number representing the PC register to symbolic constant representing the MDR register. Add constant for the PC register to the end of the table. 2014-02-03 Mark Kettenis * bsd-kvm.c: Include 2014-02-03 Mark Kettenis * sparc64nbsd-nat.c (sparc64nbsd_supply_fpregset): Fix prototype. 2014-01-31 Joel Brobecker * ada-lang.h (clear_ada_sym_cache): Delete. 2014-01-30 Ulrich Weigand  * auxv.c (fprint_target_auxv): Handle AT_HWCAP2. 2014-01-29 Jose E. Marchesi * sparc64-linux-tdep.c (sparc64_linux_step_trap): Get PC from the sigreturn register save area only if the syscall is sigreturn. 2014-01-29 Joel Brobecker * valops.c (value_slice): Minor reformatting. 2014-01-28 Ulrich Weigand  * ppc64-tdep.c (ppc64_standard_linkage7): Fix typo. 2014-01-28 Joel Brobecker * ada-lang.c (maint_set_ada_cmdlist, maint_show_ada_cmdlist): New static globals. (maint_set_ada_cmd, maint_show_ada_cmd): New functions. (ada_ignore_descriptive_types_p): New static global. (find_parallel_type_by_descriptive_type): Return immediately if ada_ignore_descriptive_types_p is set. (_initialize_ada_language): Register new commands "maintenance set ada", "maintenance show ada", "maintenance set ada ignore-descriptive-types" and "maintenance show ada ignore-descriptive-types". * NEWS: Add entry for new "maint ada set/show ignore-descriptive-types" commands. 2014-01-27 Markus Metzger * record-btrace.c (record_btrace_close): Call btrace_teardown for all threads. 2014-01-27 Joel Brobecker * ada-lang.c: Remove "#ifdef UI_OUT" condition for including "ui-out.h". 2014-01-27 Joel Brobecker * ada-typeprint (type_is_full_subrange_of_target_type): New function. (print_range): Add parameter bounds_prefered_p. If not set, try printing range types using the name of their base type. (print_range_type): Add parameter bounds_prefered_p. Use it in call to print_range. (print_array_type, ada_print_type): Update calls to print_range and print_range_type. 2014-01-27 Joel Brobecker * ada-typeprint.c (print_array_type, print_choices, print_range) (print_range_bound, print_dynamic_range_bound, print_range_type): Remove declaration. 2014-01-27 Joel Brobecker * ada-typeprint.c (print_range): Add missing empty line after local declaration. 2014-01-27 Joel Brobecker * ada-valprint.c (print_optional_low_bound): Get index_type's target type for as long as it is a TYPE_CODE_RANGE. 2014-01-27 Joel Brobecker * procfs.c (procfs_make_note_section): Remove assertion and associated comment. 2014-01-24 Yao Qi * remote.c (remote_read_bytes): Change type of len to ULONGEST. * corelow.c (get_core_siginfo): Likewise. 2014-01-24 Yao Qi * remote.c (remote_write_bytes_aux): Change type of 'len' to ULONGEST. Don't check 'len' is negative. (remote_write_bytes): Change type of 'len' to ULONGEST. 2014-01-23 Tom Tromey PR python/16485: * python/lib/gdb/FrameDecorator.py: (FrameVars.fetch_frame_args): Handle exception from frame.block. (FrameVars.fetch_frame_locals): Likewise. 2014-01-23 Tom Tromey PR python/16487: * python/py-framefilter.c (py_print_frame): Don't call Py_DECREF on a NULL pointer. Move "goto error" to correct place. 2014-01-23 Tom Tromey PR python/16491: * python/py-framefilter.c (apply_frame_filter): Call ensure_python_env after computing gdbarch. 2014-01-23 Yao Qi * target.c (raw_memory_xfer_partial): Change argument type from void * to gdb_byte *. (memory_xfer_partial_1, memory_xfer_partial): Likewise. 2014-01-22 Doug Evans New gdbserver option --debug-format=timestamp. * NEWS: Mention it. 2014-01-22 Andreas Arnez * syscalls/s390x-linux.xml: New file. * syscalls/s390-linux.xml: New file. * s390-linux-tdep.c (XML_SYSCALL_FILENAME_S390): New macro. (XML_SYSCALL_FILENAME_S390X): Likewise. (op_svc): New enum value for SVC opcode. (s390_sigtramp_frame_sniffer): Replace literal by 'op_svc'. (s390_linux_get_syscall_number): New function. (s390_gdbarch_init): Register '*get_syscall_number' and the syscall xml file name. * data-directory/Makefile.in (SYSCALLS_FILES): Add "s390-linux.xml" and "s390x-linux.xml". * NEWS: Announce new feature. 2014-01-22 Baruch Siach * xtensa-tdep.h (xtensa_elf_greg_t): Change type to uint32_t. 2014-01-22 Pedro Alves * xtensa-config.c: Include defs.h. 2014-01-22 Joel Brobecker * common/common-utils.h: Add "ARI:" comment beside __func__ reference. 2014-01-22 Joel Brobecker * common/common-utils.h (FUNCTION_NAME): Expand the macro's documentation a bit. 2014-01-21 Roland McGrath * configure.ac: Call AM_PROG_INSTALL_STRIP. * configure: Regenerate. * aclocal.m4: Regenerate. * Makefile.in (install_sh, INSTALL_STRIP_PROGRAM, STRIP): New substituted variables. (install-strip): New target. (INSTALL_SCRIPT): New substituted variable. (FLAGS_TO_PASS): Add it. (install-only): Use $(INSTALL_SCRIPT) rather than $(INSTALL_PROGRAM) for gcore. 2014-01-20 Tom Tromey * cli/cli-decode.h (struct cmd_list_element): Move all bitfields together. 2014-01-20 Tom Tromey * cli/cli-decode.c (add_cmd, deprecate_cmd, add_alias_cmd) (add_setshow_cmd_full, delete_cmd, lookup_cmd_1) (deprecated_cmd_warning, complete_on_cmdlist): Update. * cli/cli-decode.h (CMD_DEPRECATED, DEPRECATED_WARN_USER) (MALLOCED_REPLACEMENT, DOC_ALLOCATED): Remove. (struct cmd_list_element) : Remove. : New fields. : Now bitfields. * maint.c (maintenance_do_deprecate): Update. * top.c (execute_command): Update. 2014-01-20 Baruch Siach * xtensa-linux-nat.c: Include asm/ptrace.h. 2014-01-17 Iain Buclaw * Makefile.in (SFILES): Add d-support.c. (COMMON_OBS): Add d-support.o. * d-lang.h (d_parse_symbol): Add comment, now defined in d-support.c. * d-lang.c (parse_call_convention) (parse_attributes, parse_function_types) (parse_function_args, parse_type, parse_identifier) (call_convention_p, d_parse_symbol): Move functions to ... * d-support.c: ... New file. 2014-01-17 Iain Buclaw * d-lang.h (d_parse_symbol): Add declaration. * d-lang.c (extract_identifiers) (extract_type_info): Remove functions. (parse_call_convention, parse_attributes) (parse_function_types, parse_function_args) (parse_type, parse_identifier, call_convention_p) (d_parse_symbol): New functions. (d_demangle): Use d_parse_symbol to demangle D symbols. 2014-01-17 Iain Buclaw * d-lang.h (struct builtin_d_type): New data type. (builtin_d_type): Add declaration. * d-lang.c (d_language_arch_info, build_d_types) (builtin_d_type): New functions. (enum d_primitive_types): New data type. (d_language_defn): Change c_language_arch_info to d_language_arch_info. (d_type_data): New static variable. (_initialize_d_language): Initialize d_type_data. 2014-01-17 Iain Buclaw * d-lang.h (d_main_name): Add declaration. * d-lang.c (d_main_name): New function. * symtab.c (find_main_name): Add call to d_main_name. 2014-01-17 Iain Buclaw * d-lang.c (d_language_defn): Change macro_expansion_c to macro_expansion_no. 2014-01-17 Iain Buclaw * MAINTAINERS: Add myself as a write-after-approval maintainer. 2014-01-17 Sergio Durigan Junior * breakpoint.c (insert_bp_location): Add "volatile" keyword to "struct gdb_exception" declaration. * remote.c (getpkt_or_notif_sane): Likewise. 2014-01-17 Doug Evans * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): New function, contents of dirnames_to_char_ptr_vec_append moved here. (delim_string_to_char_ptr_vec): New function. (dirnames_to_char_ptr_vec_append): Rewrite. * common/gdb_vecs.h (delim_string_to_char_ptr_vec): Declare. 2014-01-17 Doug Evans * common/common-utils.h (FUNCTION_NAME): Renamed from ASSERT_FUNCTION, and moved here ... * common/gdb_assert.h (ASSERT_FUNCTION): ... from here. #include "common-utils.h". (gdb_assert, gdb_assert_fail, gdb_assert_not_reached): Update. * common/vec.h (VEC_ASSERT_PASS): Update. * darwin-nat.h: Replace #include of gdb_assert.h with common-utils.h. (MACH_CHECK_ERROR): Update. 2014-01-17 Simon Marchi * gdbarch.sh (gdbarch_address_class_name_to_type_flags): Add comments. * gdbarch.h: Regenerate. 2014-01-16 Tom Tromey * value.c (struct value) : Move earlier. 2014-01-16 Tom Tromey * remote.c (extended_remote_create_inferior): Rename from extended_remote_create_inferior_1. Add "ops" argument. Remove old implementation. 2014-01-16 Pedro Alves * s390-linux-tdep.c (s390_frame_unwind_cache): Swallow NOT_AVAILABLE_ERROR errors while parsing the prologue or reading the backchain. 2014-01-16 Doug Evans * dwarf2read.c (open_and_init_dwp_file): Fix typo in comment. 2014-01-16 Markus Metzger * btrace.h (btrace_thread_flag): New. (struct btrace_thread_info) : New. * record-btrace.c (record_btrace_resume_thread) (record_btrace_find_thread_to_move, btrace_step_no_history) (btrace_step_stopped, record_btrace_start_replaying) (record_btrace_step_thread, record_btrace_decr_pc_after_break) (record_btrace_find_resume_thread): New. (record_btrace_resume, record_btrace_wait): Extend. (record_btrace_can_execute_reverse): New. (record_btrace_open): Fail in non-stop mode. (record_btrace_set_replay): Split into this, ... (record_btrace_stop_replaying): ... this, ... (record_btrace_clear_histories): ... and this. (init_record_btrace_ops): Init to_can_execute_reverse. * NEWS: Announce it. 2014-01-16 Markus Metzger * target.h (struct target_ops) : New. (forward_target_decr_pc_after_break) (target_decr_pc_after_break): New. * target.c (forward_target_decr_pc_after_break) (target_decr_pc_after_break): New. * aix-thread.c (aix_thread_wait): Call target_decr_pc_after_break instead of gdbarch_decr_pc_after_break. * darwin-nat.c (cancel_breakpoint): Call target_decr_pc_after_break instead of gdbarch_decr_pc_after_break. * infrun.c (adjust_pc_after_break): Call target_decr_pc_after_break instead of gdbarch_decr_pc_after_break. * linux-nat.c (cancel_breakpoint): Call target_decr_pc_after_break instead of gdbarch_decr_pc_after_break. * linux-thread-db.c (check_event): Call target_decr_pc_after_break instead of gdbarch_decr_pc_after_break. * record-full.c (record_full_wait_1): Call target_decr_pc_after_break instead of gdbarch_decr_pc_after_break. 2014-01-16 Markus Metzger * btrace.c: Include regcache.h. (btrace_add_pc): New. (btrace_enable): Call btrace_add_pc. (btrace_is_empty): New. * btrace.h (btrace_is_empty): New. * record-btrace.c (require_btrace, record_btrace_info): Call btrace_is_empty. 2014-01-16 Markus Metzger * common/linux-btrace.c (perf_event_read_bts, linux_read_btrace): Support delta reads. (linux_disable_btrace): Change return type. * common/linux-btrace.h (linux_read_btrace): Change parameters and return type to allow error reporting. Update users. (linux_disable_btrace): Change return type. Update users. * common/btrace-common.h (btrace_read_type) : New. (btrace_error): New. (btrace_block) : Comment on BEGIN == 0. * btrace.c (btrace_compute_ftrace): Start from the end of the current trace. (btrace_stitch_trace, btrace_clear_history): New. (btrace_fetch): Read delta trace, return if replaying. (btrace_clear): Move clear history code to btrace_clear_history. (parse_xml_btrace): Throw an error if parsing failed. * target.h (struct target_ops) : Change parameters and return type to allow error reporting. (target_read_btrace): Change parameters and return type to allow error reporting. * target.c (target_read_btrace): Update. * remote.c (remote_read_btrace): Support delta reads. Pass errors on. * NEWS: Announce it. 2014-01-16 Markus Metzger * record.h (record_btrace_frame_unwind) (record_btrace_tailcall_frame_unwind): New declarations. * dwarf2-frame: Include record.h (dwarf2_frame_cfa): Throw an error for btrace frames. * record-btrace.c: Include hashtab.h. (btrace_get_bfun_name): New. (btrace_call_history): Call btrace_get_bfun_name. (struct btrace_frame_cache): New. (bfcache): New. (bfcache_hash, bfcache_eq, bfcache_new): New. (btrace_get_frame_function): New. (record_btrace_frame_unwind_stop_reason): Allow unwinding. (record_btrace_frame_this_id): Compute own id. (record_btrace_frame_prev_register): Provide PC, throw_error for all other registers. (record_btrace_frame_sniffer): Detect btrace frames. (record_btrace_tailcall_frame_sniffer): New. (record_btrace_frame_dealloc_cache): New. (record_btrace_frame_unwind): Add new functions. (record_btrace_tailcall_frame_unwind): New. (_initialize_record_btrace): Allocate cache. * btrace.c (btrace_clear): Call reinit_frame_cache. * NEWS: Announce it. 2014-01-16 Markus Metzger * record-btrace.c (record_btrace_set_replay) (record_btrace_goto_begin, record_btrace_goto_end) (record_btrace_goto): New. (init_record_btrace_ops): Initialize them. * NEWS: Announce it. 2014-01-16 Markus Metzger * record-btrace.c (record_btrace_find_new_threads) (record_btrace_thread_alive): New. (init_record_btrace_ops): Initialize to_find_new_threads and to_thread_alive. 2014-01-16 Markus Metzger * record-btrace.c (record_btrace_resume): New. (record_btrace_wait): New. (init_record_btrace_ops): Initialize to_wait and to_resume. 2014-01-16 Markus Metzger * record-btrace.c (record_btrace_xfer_partial) (record_btrace_insert_breakpoint, record_btrace_remove_breakpoint) (record_btrace_allow_memory_access): New. (init_record_btrace_ops): Initialize new methods. * target.c (raw_memory_xfer_partial): Bail out if target reports that this memory is not available. 2014-01-16 Markus Metzger * target.h (target_ops) : Add target_ops parameter. (forward_target_insert_breakpoint): New. (forward_target_remove_breakpoint): New. (memory_remove_breakpoint, memory_insert_breakpoint): Add target_ops parameter. * target.c (target_insert_breakpoint): Split into this and ... (forward_target_insert_breakpoint): ... this. (target_remove_breakpoint): Split into this and ... (forward_target_remove_breakpoint): ... this. (debug_to_insert_breakpoint): Add target_ops parameter. Call forward_target_insert_breakpoint. (debug_to_remove_breakpoint): Add target_ops parameter. Call forward_target_remove_breakpoint. (update_current_target): Do not inherit or default to_insert_breakpoint and to_remove_breakpoint. * corelow.c (ignore): Add target_ops parameter. * exec.c (ignore): Add target_ops parameter. * mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint): Add target_ops parameter. * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint): Add target_ops parameter. * nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint): Add target_ops parameter. * record-full.c (record_full_beneath_to_insert_breakpoint) (record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint) (tmp_to_remove_breakpoint, record_full_insert_breakpoint) (record_full_remove_breakpoint, record_full_core_insert_breakpoint) (record_full_core_remove_breakpoint): Add target_ops parameter. Update users. (record_full_beneath_to_insert_breakpoint_ops) (record_full_beneath_to_remove_breakpoint_ops) (tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New. (record_full_open): Initialize tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops, record_full_beneath_to_insert_breakpoint_ops, and record_full_beneath_to_remove_breakpoint_ops. * remote-m32r-sdi.c (m32r_insert_breakpoint) (m32r_remove_breakpoint): Add target_ops parameter. * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint): Add target_ops parameter. * remote.c (remote_insert_breakpoint, remote_remove_breakpoint): Add target_ops parameter. 2014-01-16 Jan Kratochvil Markus Metzger * record-btrace.c: Include frame-unwind.h. (record_btrace_frame_unwind_stop_reason) (record_btrace_frame_this_id, record_btrace_frame_prev_register) (record_btrace_frame_sniffer, record_btrace_frame_unwind): New. (init_record_btrace_ops): Install it. 2014-01-16 Jan Kratochvil * frame.c (get_frame_unwind_stop_reason): Unconditionally call get_prev_frame_1. 2014-01-16 Jan Kratochvil * dwarf2-frame.c (dwarf2_frame_cfa): Move UNWIND_UNAVAILABLE check earlier. 2014-01-16 Jan Kratochvil * frame-unwind.c: Include target.h. (frame_unwind_try_unwinder): New function with code from ... (frame_unwind_find_by_frame): ... here. New variable unwinder_from_target, call also target_get_unwinder) (target_get_tailcall_unwinder, and frame_unwind_try_unwinder for it. * target.c (target_get_unwinder, target_get_tailcall_unwinder): New. * target.h (struct target_ops): New fields to_get_unwinder and to_get_tailcall_unwinder. (target_get_unwinder, target_get_tailcall_unwinder): New declarations. 2014-01-16 Markus Metzger * record-btrace.c (record_btrace_fetch_registers) (record_btrace_store_registers) (record_btrace_to_prepare_to_store): New. (init_record_btrace_ops): Add the above. 2014-01-16 Tom Tromey * windows-nat.c (windows_prepare_to_store): Add 'self' argument. * target.h (struct target_ops) : Add argument. (target_prepare_to_store): Add argument. * target.c (debug_to_prepare_to_store): Add argument. (update_current_target): Update. * remote.c (remote_prepare_to_store): Add 'self' argument. * remote-sim.c (gdbsim_prepare_to_store): Add 'self' argument. * remote-mips.c (mips_prepare_to_store): Add 'self' argument. * remote-m32r-sdi.c (m32r_prepare_to_store): Add 'self' argument. * record-full.c (record_full_core_prepare_to_store): Add 'self' argument. * ravenscar-thread.c (ravenscar_prepare_to_store): Add argument. * nto-procfs.c (procfs_prepare_to_store): Add 'self' argument. * monitor.c (monitor_prepare_to_store): Add 'self' argument. * inf-child.c (inf_child_prepare_to_store): Add 'self' argument. * go32-nat.c (go32_prepare_to_store): Add 'self' argument. 2014-01-16 Markus Metzger * btrace.h (replay) : New. (btrace_is_replaying): New. * btrace.c (btrace_clear): Free replay iterator. (btrace_is_replaying): New. * record-btrace.c (record_btrace_is_replaying): New. (record_btrace_info): Print insn number if replaying. (record_btrace_insn_history): Start at replay position. (record_btrace_call_history): Start at replay position. (init_record_btrace_ops): Init to_record_is_replaying. 2014-01-16 Markus Metzger * record-btrace.c (record_btrace_insn_history_range): Include end. (record_btrace_insn_history_from): Adjust range. (record_btrace_call_history_range): Include end. (record_btrace_call_history_from): Adjust range. * NEWS: Announce changes. 2014-01-16 Markus Metzger * record.h (enum record_print_flag) : New. * record.c (get_call_history_modifiers): Recognize /c modifier. (_initialize_record): Document /c modifier. * record-btrace.c (btrace_call_history): Add btinfo parameter. Reorder fields. Optionally indent the function name. Update all users. * NEWS: Announce changes. 2014-01-16 Markus Metzger * common/linux-btrace.c (linux_enable_btrace): Enlarge buffer. 2014-01-16 Markus Metzger * btrace.c (ftrace_new_function): Start counting at one. * record-btrace.c (record_btrace_info): Adjust number of calls and insns. * NEWS: Announce it. 2014-01-16 Markus Metzger * record-btrace.c (btrace_call_history_insn_range): Print insn range as [begin, end]. 2014-01-16 Markus Metzger * btrace.h (struct btrace_func_link): New. (enum btrace_function_flag): New. (struct btrace_inst): Rename to ... (struct btrace_insn): ...this. Update all users. (struct btrace_func) : Remove. (struct btrace_func_link): New. (struct btrace_func): Rename to ... (struct btrace_function): ...this. Update all users. (struct btrace_function) : New. (struct btrace_insn_iterator): Rename to ... (struct btrace_insn_history): ...this. Update all users. (struct btrace_insn_iterator, btrace_call_iterator): New. (struct btrace_target_info) : Remove. (struct btrace_target_info) : New. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * btrace.c (btrace_init_insn_iterator) (btrace_init_func_iterator, compute_itrace): Remove. (ftrace_print_function_name, ftrace_print_filename) (ftrace_skip_file): Change parameter to const. (ftrace_init_func): Remove. (ftrace_debug): Use new btrace_function fields. (ftrace_function_switched): Also consider gaining and losing symbol information). (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return) (ftrace_new_switch, ftrace_find_caller, ftrace_new_function) (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall): New. (ftrace_new_function): Move. Remove debug print. (ftrace_update_lines, ftrace_update_insns): New. (ftrace_update_function): Check for call, ret, and jump. (compute_ftrace): Renamed to ... (btrace_compute_ftrace): ...this. Rewritten to compute call stack. (btrace_fetch, btrace_clear): Updated. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * record-btrace.c (require_btrace): Use new btrace thread info fields. (record_btrace_info, btrace_insn_history) (record_btrace_insn_history, record_btrace_insn_history_range): Use new btrace thread info fields and new iterator. (btrace_func_history_src_line): Rename to ... (btrace_call_history_src_line): ...this. Use new btrace thread info fields. (btrace_func_history): Rename to ... (btrace_call_history): ...this. Use new btrace thread info fields and new iterator. (record_btrace_call_history, record_btrace_call_history_range): Use new btrace thread info fields and new iterator. 2014-01-16 Markus Metzger * frame.h (frame_id_build_unavailable_stack_special): New. * frame.c (frame_id_build_unavailable_stack_special): New. 2014-01-16 Markus Metzger * amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call) (amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New. (amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump to gdbarch. * i386-tdep.c (i386_insn_is_call, i386_insn_is_ret) (i386_insn_is_jump, i386_jmp_p): New. (i386_gdbarch_init): Add insn_is_call, insn_is_ret, and insn_is_jump to gdbarch. * gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New. * gdbarch.h: Regenerated. * gdbarch.c: Regenerated. * arch-utils.h (default_insn_is_call, default_insn_is_ret) (default_insn_is_jump): New. * arch-utils.c (default_insn_is_call, default_insn_is_ret) (default_insn_is_jump): New. 2014-01-16 Markus Metzger * common/btrace-common.h (btrace_read_type) : Change to ... (btrace_read_type) : ... this. Update users. (btrace_read_type) : Change to ... (btrace_read_type) : ... this. Update users. 2014-01-16 Markus Metzger * common/linux-btrace.c (linux_read_btrace): Free trace from previous iteration. 2014-01-15 Doug Evans * dwarf2read.c (open_and_init_dwp_file): Use pulongest to print uint32_t. 2014-01-15 Tom Tromey * dbxread.c (process_one_symbol): Use set_objfile_main_name. * dwarf2read.c (read_partial_die): Use set_objfile_main_name. * objfiles.c (get_objfile_bfd_data): Initialize language_of_main. (set_objfile_main_name): New function. * objfiles.h (struct objfile_per_bfd_storage) : New fields. (set_objfile_main_name): Declare. * symtab.c (find_main_name): Loop over objfiles to find the main name and language. (set_main_name): Now static. (get_main_info): Add comment. * symtab.h (set_main_name): Don't declare. 2014-01-15 Tom Tromey * symtab.c (main_progspace_key): New global. (struct main_info): New. (name_of_main, language_of_main): Remove. (get_main_info, main_info_cleanup): New function. (set_main_name, main_name, main_language): Use get_main_info. (_initialize_symtab): Initialize main_progspace_key. 2014-01-15 Tom Tromey * dbxread.c (process_one_symbol): Update. * dwarf2read.c (read_partial_die): Update. * symfile.c (set_initial_language): Call main_language. * symtab.c (language_of_main): Now static. (set_main_name): Add 'lang' parameter. (find_main_name): Update. (main_language): New function. (symtab_observer_executable_changed): Update. * symtab.h (set_main_name): Update. (language_of_main): Remove. (main_language): Declare. 2014-01-15 Tom Tromey * symfile.c (init_entry_point_info): Use new "initialized" field. Update. * objfiles.h (struct entry_point) : New field. (struct objfile_per_bfd_storage) : New field, moved from... (struct objfile) : ...here. Remove. * objfiles.c (entry_point_address_query): Update. 2014-01-15 Tom Tromey * objfiles.c (entry_point_address_query): Relocate entry point address. (objfile_relocate1): Do not relocate entry point address. * objfiles.h (struct entry_info) : Update comment. : New field. * symfile.c (init_entry_point_info): Find the entry point's section. 2014-01-15 Tom Tromey * solib-frv.c (enable_break): Use entry_point_address_query. 2014-01-15 Omair Javaid * NEWS: Add note on improved process record-replay on arm*-linux* targets. 2014-01-15 Omair Javaid * arm-tdep.c (enum arm_record_result): New enum. (arm_record_unsupported_insn): New function. (arm_record_coproc_data_proc): Removed. (thumb2_record_ld_st_multiple): New function. (thumb2_record_ld_st_dual_ex_tbb): New function. (thumb2_record_data_proc_sreg_mimm): New function. (thumb2_record_ps_dest_generic): New function. (thumb2_record_branch_misc_cntrl): New function. (thumb2_record_str_single_data): New function. (thumb2_record_ld_mem_hints): New function. (thumb2_record_ld_word): New function. (thumb2_record_lmul_lmla_div): New function. (thumb2_record_decode_insn_handler): New function. (decode_insn): Add thumb32 instruction handlers. 2014-01-15 Omair Javaid * arm-linux-tdep.c: Include "record-full.h" and "linux-record.h". (struct arm_linux_record_tdep): Declare. (arm_canonicalize_syscall): New function. (arm_all_but_pc_registers_record): New function. (arm_linux_syscall_record): New function. (arm_linux_init_abi): Add syscall recording constructs. * arm-tdep.c (thumb_record_ldm_stm_swi): Update thumb syscall decoding. (arm_record_coproc_data_proc): Update arm syscall decoding. * arm-tdep.h (struct gdbarch_tdep) : Remove. : New field. * configure.tgt (arm*-*-linux*): Add linux-record.o to gdb_target_obs. 2014-01-15 Omair Javaid * arm-tdep.c (thumb_record_misc): Update to use sp as base register for push instruction recording. 2014-01-15 Omair Javaid * arm-tdep.c (thumb_record_misc): Update to correct logical error while recording ldm, ldmia and pop instructions. 2014-01-15 Omair Javaid * arm-tdep.c (struct arm_mem_r) : Change type to uint32_t. 2014-01-15 Pedro Alves * go32-nat.c (go32_open, go32_close, go32_attach, go32_detach) (go32_resume, go32_fetch_registers, store_register) (go32_store_registers, go32_prepare_to_store) (go32_xfer_memory, go32_files_info, go32_kill_inferior) (go32_create_inferior, go32_can_run, go32_terminal_init) (go32_terminal_inferior, go32_terminal_ours): Delete forward declarations. 2014-01-15 Tom Tromey * target.h (async_callback_ftype): New typedef. (struct target_ops) : Use it. 2014-01-15 Joel Brobecker * python/py-value.c (get_field_type): Remove unnecessary curly braces for single-statement if block. 2014-01-15 Joel Brobecker * python/py-type.c (convert_field): Add missing empty line after declarations. 2014-01-14 Doug Evans * symfile.h (expand_symtabs_matching): Renamed from expand_partial_symbol_names. Update prototype. (map_symbol_filenames): Renamed from map_partial_symbol_filenames. * symfile.c (expand_symtabs_matching): Renamed from expand_partial_symbol_names. New args file_matcher, kind. Rename arg fun to symbol_matcher. (map_symbol_filenames): Renamed from map_partial_symbol_filenames. * ada-lang.c (ada_complete_symbol_matcher): Renamed from ada_expand_partial_symbol_name. (ada_make_symbol_completion_list): Update to call expand_symtabs_matching. (ada_add_global_exceptions): Call expand_symtabs_matching. * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update to call map_symbol_filenames. * symtab.c (sources_info): Update to call map_symbol_filenames. (search_symbols): Call expand_symtabs_matching. (symbol_completion_matcher): Renamed from expand_partial_symbol_name. (default_make_symbol_completion_list_break_on): Update to call expand_symtabs_matching. (make_source_files_completion_list): Update to call map_symbol_filenames. 2014-01-14 Doug Evans * symfile.h (expand_symtabs_file_matcher_ftype): New typedef. (expand_symtabs_symbol_matcher_ftype): New typedef. (quick_symbol_functions.expand_symtabs_matching): Update to use. expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype. * symfile.c (expand_partial_symbol_names): Update to use expand_symtabs_symbol_matcher_ftype. * dwarf2read.c (dw2_expand_symtabs_matching): Update to use expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype. Arg name_matcher renamed to symbol_matcher. * psymtab.c (recursively_search_psymtabs): Update to use expand_symtabs_symbol_matcher_ftype. Arg name_matcher renamed to sym_matcher. (expand_symtabs_matching_via_partial): Update to use expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype. Arg name_matcher renamed to symbol_matcher. 2014-01-14 Doug Evans * psymtab.c (expand_partial_symbol_names): Delete, moved to symfile.c. (map_partial_symbol_filenames): Ditto. * psymtab.h (expand_partial_symbol_names): Delete, moved to symfile.h. (map_partial_symbol_filenames): Ditto. * symfile.c (expand_partial_symbol_names): Moved here from psymtab.c. (map_partial_symbol_filenames): Ditto. * symfile.h (expand_partial_symbol_names): Moved here from psymtab.h. (map_partial_symbol_filenames): Ditto. * symtab.c: Delete #include "psymtab.h". 2014-01-14 Pedro Alves Tom Tromey * infrun.c (use_displaced_stepping): Use find_record_target instead of RECORD_IS_USED. (adjust_pc_after_break): Use record_full_is_used instead of RECORD_IS_USED. * record-btrace.c (record_btrace_open): Call record_preopen instead of checking RECORD_IS_USED. * record-full.c (record_full_shortname) (record_full_core_shortname): New globals. (record_full_is_used): New function. (find_full_open): Call record_preopen instead of checking RECORD_IS_USED. (init_record_full_ops): Set the target's shortname to record_full_shortname. (init_record_full_core_ops): Set the target's shortname to record_full_core_shortname. * record-full.h (record_full_is_used): Declare. * record.c (find_record_target): Make extern. (record_preopen): New function. * record.h (RECORD_IS_USED): Delete macro. (find_record_target, record_preopen): Declare functions. 2014-01-14 Yao Qi * gdbarch.sh (core_xfer_shared_libraries): Change its argument 'len''s type to ULONGEST. (core_xfer_shared_libraries_aix): Likewise. * gdbarch.c, gdbarch.h: Regenerated. * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries): Change type of 'len' to ULONGEST. * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise. (rs6000_aix_core_xfer_shared_libraries_aix): Likewise. 2014-01-14 Yao Qi * common/linux-osdata.c (linux_xfer_osdata_processes): Change type of 'len' to ULONGEST. (linux_xfer_osdata_processgroups): Likewise. (linux_xfer_osdata_threads): Likewise. (linux_xfer_osdata_fds): Likewise. (linux_xfer_osdata_isockets): Likewise. (linux_xfer_osdata_shm): Likewise. (linux_xfer_osdata_sem): Likewise. (linux_xfer_osdata_msg): Likewise. (linux_common_xfer_osdata): Likewise. (struct osdata_type) : Likewise. * common/linux-osdata.h (linux_common_xfer_osdata): Update the declaration. 2014-01-14 Yao Qi * target.h (target_xfer_partial_ftype): Update. (struct target_ops) : Change 'len' type to ULONGEST. * aix-thread.c (aix_thread_xfer_partial): Change type of argument 'len' to ULONGEST. * auxv.c (procfs_xfer_auxv): Likewise. (ld_so_xfer_auxv): Likewise. (memory_xfer_auxv): Likewise. * bfd-target.c (target_bfd_xfer_partial): Likewise. * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise. * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise. * corelow.c (core_xfer_partial): Likewise. * ctf.c (ctf_xfer_partial): Likewise. * darwin-nat.c (darwin_read_write_inferior): Likewise. Use '%u'. (darwin_read_dyld_info): Likewise. (darwin_xfer_partial): Likewise. * exec.c (section_table_xfer_memory_partial): Likewise. (exec_xfer_partial): Likewise. * exec.h (section_table_xfer_memory_partial): Update declaration. * gnu-nat.c (gnu_xfer_memory): Likewise. Call pulongest instead of plongest. (gnu_xfer_partial): Likewise. * ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise. (ia64_hpux_xfer_solib_got): Likewise. (ia64_hpux_xfer_partial): Likewise. * ia64-linux-nat.c (ia64_linux_xfer_partial): * inf-ptrace.c (inf_ptrace_xfer_partial): * inf-ttrace.c (inf_ttrace_xfer_partial): * linux-nat.c (linux_xfer_siginfo): Likewise. (linux_nat_xfer_partial): Likewise. (spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise. (linux_nat_xfer_osdata, linux_xfer_partial): Likewise. * monitor.c (monitor_xfer_memory): Likewise. (monitor_xfer_partial): Likewise. * procfs.c (procfs_xfer_partial): Likewise. * record-full.c (record_full_xfer_partial): Likewise. (record_full_core_xfer_partial): Likewise. * remote-sim.c (gdbsim_xfer_memory): Likewise. Call pulongest instead of plongest. (gdbsim_xfer_partial): Likewise. * remote.c (remote_xfer_partial): Likewise. * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise. * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update declaration. * rs6000-nat.c (rs6000_xfer_partial): Likewise. (rs6000_xfer_shared_libraries): Likewise. * sol-thread.c (sol_thread_xfer_partial): Likewise. * sparc-nat.c (sparc_xfer_wcookie): Likewise. (sparc_xfer_partial): Likewise. * spu-linux-nat.c (spu_proc_xfer_spu): Likewise. (spu_xfer_partial): Likewise. * spu-multiarch.c (spu_xfer_partial): Likewise. * target.c (target_read_live_memory): Likewise. (memory_xfer_live_readonly_partial): Likewise. (memory_xfer_partial, memory_xfer_partial_1): Likewise. (target_xfer_partial, default_xfer_partial): Likewise. (current_xfer_partial): Likewise. * tracepoint.c (tfile_xfer_partial): Likewise. * windows-nat.c (windows_xfer_memory): Likewise. Call pulongest instead of plongest. (windows_xfer_partial): Likewise. (windows_xfer_shared_libraries): Likewise. 2014-01-14 Yao Qi * rs6000-nat.c (rs6000_xfer_shared_libraries): Use target_xfer_partial_ftype. 2014-01-13 Siva Chandra Reddy PR python/15464 PR python/16113 * valops.c (value_struct_elt_bitpos): New function * py-type.c (convert_field): Set 'name' attribute of a gdb.Field object to 'None' if the field name is an empty string (""). * python/py-value.c (valpy_getitem): Use 'bitpos' and 'type' attribute to look for a field when 'name' is 'None'. (get_field_type): New function 2014-01-13 Doug Evans PR symtab/16426 * dwarf2read.c (dwarf2_get_dwz_file): Call gdb_bfd_record_inclusion. (try_open_dwop_file): Ditto. * gdb_bfd.c: #include "vec.h". (bfdp): New typedef. (struct gdb_bfd_data): New member included_bfds. (gdb_bfd_unref): Unref all included bfds. (gdb_bfd_record_inclusion): New function. * gdb_bfd.h (gdb_bfd_record_inclusion): Declare. 2014-01-13 Tom Tromey * gdbcore.h (deprecated_core_resize_section_table): Remove. 2014-01-13 Tom Tromey * defs.h (use_windows): Remove. * gdb.c (main): Update. * main.c (captured_main, gdb_main): Update. * main.h (struct captured_main_args) : Remove. * top.c (use_windows): Remove. 2014-01-13 Tom Tromey * defs.h (deprecated_flush_hook): Remove. 2014-01-13 Jan Kratochvil PR threads/16216 * linux-thread-db.c (try_thread_db_load): Add parameter check_auto_load_safe. Move here the file_is_auto_load_safe call. (try_thread_db_load_from_pdir_1): Move it there from here. (try_thread_db_load_from_sdir): Update caller. (try_thread_db_load_from_dir): Move it there from here. 2014-01-13 Patrick Palka * regformats/regdat.sh: Always rewrite the register file. 2014-01-13 Pedro Alves * Makefile.in (CHECK_HEADERS): New variable. (check-headers:): New rule. 2014-01-13 Tom Tromey * cli/cli-setshow.c (do_set_command): Update. * defs.h (deprecated_set_hook): Remove. * top.c (deprecated_set_hook): Remove. 2014-01-13 Pedro Alves * tracepoint.c (tfile_fetch_registers): Don't infer the PC from the tracepoint if the PC is a pseudo-register. 2014-01-13 Tom Tromey * defs.h (XCALLOC): Remove. * bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC. (print_bcache_statistics): Use XCNEWVEC, not XCALLOC. * dwarf2loc.c (allocate_piece_closure): Likewise. * elfread.c (elf_symfile_segments): Likewise. (elf_symfile_segments): Likewise. * gdbtypes.c (copy_type_recursive): Likewise. * i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC. * jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC. * minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not XCALLOC. * mt-tdep.c (mt_gdbarch_init): Likewise. * opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not XCALLOC. * psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC. * regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC. * registry.c (registry_alloc_data): Likewise. * rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * serial.c (serial_fdopen_ops): Likewise. * solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not XCALLOC. * spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC. * symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC, not XCALLOC. 2014-01-13 Tom Tromey * defs.h (XMALLOC): Remove. * avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC. * bfin-tdep.c (bfin_gdbarch_init): Likewise. * cli-out.c (struct ui_out *): Likewise. * cli/cli-dump.c (add_dump_command): Likewise. (add_dump_command): Likewise. * complaints.c (get_complaints): Likewise. (find_complaint): Likewise. * dwarf2-frame.c (execute_cfa_program): Likewise. * dwarf2read.c (abbrev_table_read_table): Likewise. * gdbarch.sh: Likewise. * gdbarch.c: Rebuild. * inf-ttrace.c (inf_ttrace_add_page): Likewise. * interps.c (interp_new): Likewise. * lm32-tdep.c (lm32_gdbarch_init): Likewise. * m32r-tdep.c (m32r_gdbarch_init): Likewise. * mi/mi-console.c (mi_console_file_new): Likewise. * mi/mi-interp.c (mi_interpreter_init): Likewise. * mi/mi-out.c (mi_out_new): Likewise. * mi/mi-parse.c (mi_parse): Likewise. * microblaze-tdep.c (microblaze_gdbarch_init): Likewise. * moxie-tdep.c (moxie_gdbarch_init): Likewise. * observer.c (xalloc_observer_list_node): Likewise. * regcache.c (regcache_xmalloc_1): Likewise. * reggroups.c (reggroup_new): Likewise. (_initialize_reggroup): Likewise. * registry.c (register_data_with_cleanup): Likewise. * remote.c (remote_notif_stop_alloc_reply): Likewise. * ser-base.c (serial_ttystate): Likewise. * ser-mingw.c (make_pipe_state): Likewise. * ser-pipe.c (pipe_open): Likewise. * serial.c (serial_open): Likewise. * sh64-tdep.c (sh64_gdbarch_init): Likewise. * tui/tui-data.c (tui_alloc_generic_win_info): Likewise. (tui_alloc_win_info): Likewise. (tui_add_content_elements): Likewise. * tui/tui-file.c (tui_file_new): Likewise. * tui/tui-out.c (tui_out_new): Likewise. * ui-file.c (mem_file_new): Likewise. * ui-out.c (push_level): Likewise. (make_cleanup_ui_out_end): Likewise. (append_header_to_list): Likewise. (ui_out_new): Likewise. * user-regs.c (user_reg_add_builtin): Likewise. 2014-01-13 Tom Tromey * defs.h (XZALLOC): Remove. * ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC. * ada-tasks.c (get_ada_tasks_pspace_data): Likewise. (get_ada_tasks_inferior_data): Likewise. * auto-load.c (get_auto_load_pspace_data): Likewise. * auxv.c (get_auxv_inferior_data): Likewise. * bfd-target.c (target_bfd_reopen): Likewise. * breakpoint.c (get_catch_syscall_inferior_data): Likewise. (deprecated_insert_raw_breakpoint): Likewise. * bsd-uthread.c (bsd_uthread_pid_to_str): Likewise. * corelow.c (core_open): Likewise. * darwin-nat.c (darwin_check_new_threads): Likewise. (darwin_attach_pid): Likewise. * dummy-frame.c (dummy_frame_push): Likewise. * dwarf2-frame.c (dwarf2_frame_cache): Likewise. * dwarf2loc.c (allocate_piece_closure): Likewise. * elfread.c (elf_symfile_segments): Likewise. * eval.c (ptrmath_type_p): Likewise. * exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise. * gdbtypes.c (alloc_type_arch): Likewise. (alloc_type_instance): Likewise. * hppa-tdep.c (hppa_gdbarch_init): Likewise. * inf-child.c (inf_child_can_use_agent): Likewise. * inflow.c (get_inflow_inferior_data): Likewise. * infrun.c (save_infcall_suspend_state): Likewise. * jit.c (jit_reader_load): Likewise. (get_jit_objfile_data): Likewise. (get_jit_program_space_data): Likewise. (jit_object_open_impl): Likewise. (jit_symtab_open_impl): Likewise. (jit_block_open_impl): Likewise. (jit_frame_sniffer): Likewise. * linux-fork.c (add_fork): Likewise. * maint.c (make_command_stats_cleanup): Likewise. * objfiles.c (get_objfile_pspace_data): Likewise. * opencl-lang.c (struct lval_closure): Likewise. * osdata.c (osdata_start_osdata): Likewise. * progspace.c (new_address_space): Likewise. (add_program_space): Likewise. * remote-sim.c (get_sim_inferior_data): Likewise. * sh-tdep.c (sh_gdbarch_init): Likewise. * skip.c (Ignore): Likewise. (skip_delete_command): Likewise. * solib-aix.c (get_solib_aix_inferior_data): Likewise. (library_list_start_library): Likewise. (solib_aix_current_sos): Likewise. * solib-darwin.c (get_darwin_info): Likewise. (darwin_current_sos): Likewise. * solib-dsbt.c (get_dsbt_info): Likewise. * solib-ia64-hpux.c (new_so_list): Likewise. (ia64_hpux_get_solib_linkage_addr): Likewise. * solib-spu.c (append_ocl_sos): Likewise. (spu_current_sos): Likewise. * solib-svr4.c (get_svr4_info): Likewise. (svr4_keep_data_in_core): Likewise. (library_list_start_library): Likewise. (svr4_default_sos): Likewise. (svr4_read_so_list): Likewise. * solib-target.c (library_list_start_library): Likewise. (solib_target_current_sos): Likewise. * sparc-tdep.c (sparc32_gdbarch_init): Likewise. * symfile-debug.c (install_symfile_debug_logging): Likewise. * symfile.c (default_symfile_segments): Likewise. * target-descriptions.c (tdesc_data_init): Likewise. (tdesc_create_reg): Likewise. (struct tdesc_type *): Likewise. (tdesc_create_vector): Likewise. (tdesc_set_struct_size): Likewise. (struct tdesc_type *): Likewise. (tdesc_free_feature): Likewise. (tdesc_create_feature): Likewise. * windows-nat.c (windows_add_thread): Likewise. (windows_make_so): Likewise. * xml-support.c (gdb_xml_body_text): Likewise. (gdb_xml_create_parser_and_cleanup): Likewise. (xml_process_xincludes): Likewise. * xml-syscall.c (allocate_syscalls_info): Likewise. (syscall_create_syscall_desc): Likewise. 2014-01-12 Sergio Durigan Junior * i386-tdep.c (i386_stap_parse_special_token_triplet): New function, with code from i386_stap_parse_special_token. (i386_stap_parse_special_token_three_arg_disp): Likewise. (i386_stap_parse_special_token): Move code to the two functions above; simplify it. 2014-01-09 Pedro Alves Hui Zhu PR gdb/16101 * breakpoint.c (insert_bp_location): Rename hw_bp_err_string to bp_err_string. Don't mark the location shlib_disabled if the error thrown wasn't a generic or memory error. Catch errors thrown while inserting breakpoints in overlayed code. Output error message of software breakpoints. * remote.c (remote_insert_breakpoint): If this breakpoint has target-side commands but this stub doesn't support Z0 packets, throw NOT_SUPPORTED_ERROR error. * exceptions.h (enum errors) : New error. * target.h (target_insert_breakpoint): Extend comment. (target_insert_hw_breakpoint): Add comment. 2014-01-08 Pedro Alves * remote.c (remote_add_thread): Add threads silently if starting up. (remote_notice_new_inferior): If in all-stop, and starting up, don't call notice_new_inferior. (get_current_thread): New function, factored out from ... (add_current_inferior_and_thread): ... this. Adjust. (remote_start_remote) : Fetch the thread list. If we found any thread, then select the remote's current thread as GDB's current thread too. 2014-01-08 Joel Brobecker * NEWS: Create a new section for the next release branch. Rename the section of the current branch, now that it has been cut. 2014-01-08 Joel Brobecker GDB 7.7 branch created (79301218fa0f074c5656db0ec8972a5ddcf91fb5): * version.in: Bump version to 7.7.50.DATE-cvs. 2014-01-08 Yao Qi * spu-linux-nat.c (spu_symbol_file_add_from_memory): Change type of 'id' to gdb_byte. Cast 'id' to 'const char *'. (spu_xfer_partial): Cast 'buf' to 'const char *'. 2014-01-08 Yao Qi * spu-linux-nat.c (spu_symbol_file_add_from_memory): Pass return value of bfd_get_filename to symbol_file_add_from_bfd. 2014-01-08 Pierre Muller Fix PR16201. * coff-pe-read.c (struct read_pe_section_data): Add index field. (add_pe_exported_sym): Use SECTION_DATA->INDEX for call to prim_record_mininal_symbol_and_info. (add_pe_forwarded_sym): Use known section number of forwarded symbol in call to prim_record_minimal_symbol_and_info. (read_pe_exported_syms): Set index field of section_data. 2014-01-07 Andrew Pinski * features/aarch64-core.xml (cpsr): Change to be 64bit. * features/aarch64.c: Regenerate. 2014-01-07 Andreas Schwab * target.c (return_null): Define. (update_current_target): Use it instead of return_zero for functions that return a pointer. 2014-01-07 Edjunior Barbosa Machado * source.c (add_path): Fix check for duplicated paths in the previously included paths. 2014-01-07 Honggyu Kim * ada-lang.c: Remove duplicated include statements. * alphabsd-nat.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64fbsd-nat.c: Ditto. * auto-load.c: Ditto. * ax-gdb.c: Ditto. * breakpoint.c: Ditto. * dbxread.c: Ditto. * fork-child.c: Ditto. * gdb_usleep.c: Ditto. * i386-darwin-tdep.c: Ditto. * i386fbsd-nat.c: Ditto. * infcmd.c: Ditto. * inferior.c: Ditto. * jv-lang.c: Ditto. * linux-nat.c: Ditto. * linux-tdep.c: Ditto. * m68kbsd-nat.c: Ditto. * m68klinux-nat.c: Ditto. * microblaze-tdep.c: Ditto. * mips-linux-tdep.c: Ditto. * mn10300-tdep.c: Ditto. * nto-tdep.c: Ditto. * opencl-lang.c: Ditto. * osdata.c: Ditto. * printcmd.c: Ditto. * regcache.c: Ditto. * remote-m32r-sdi.c: Ditto. * remote.c: Ditto. * symfile.c: Ditto. * symtab.c: Ditto. * tilegx-linux-nat.c: Ditto. * tilegx-tdep.c: Ditto. * tracepoint.c: Ditto. * valops.c: Ditto. * vaxbsd-nat.c: Ditto. * windows-nat.c: Ditto. * xtensa-tdep.c: Ditto. 2014-01-07 Yao Qi * spu-linux-nat.c (_initialize_spu_nat): Declare. 2014-01-07 Yao Qi Joel Brobecker * aix-thread.c (pdc_read_regs): Cast parameter to uintptr_t. (pdc_write_regs): Likewise. (fetch_regs_kernel_thread): Likewise. (store_regs_kernel_thread): Likewise. 2014-01-07 Joel Brobecker * ada-varobj.c (ada_varobj_adjust_for_child_access): Convert tagged type objects to their actual type. 2014-01-07 Joel Brobecker * ada-valprint.c (print_field_values): Add "language" parameter. Update calls to print_field_values and print_variant_part. Pass new parameter "language" in call to val_print instead of "current_language". Replace call to ada_val_print by call to val_print. (print_variant_part): Add "language" parameter. (ada_val_print_struct_union): Update call to print_field_values. 2014-01-07 Joel Brobecker * ada-valprint.c (ui_memcpy): Delete. (ada_print_floating): Update documentation. Add empty line between between function documentation and implementation. Delete variable "buffer". Use ui_file_xstrdup in place of ui_file_put. Minor adjustments following this change. 2014-01-07 Joel Brobecker * ada-valprint.c (ada_val_print_string): New function, extracted from ada_val_print_array. (ada_val_print_array): Replace extracted code by call to ada_val_print_string followed by a return. Move "else" branch to the function's top block. 2014-01-07 Joel Brobecker * ada-valprint.c (ada_val_print_array): Move implementation down. Rename parameter "offset" and "val" into "offset_aligned" and "original_value" respectively. Add parameter "offset". 2014-01-07 Joel Brobecker * ada-valprint.c (ada_val_print_ref): Rewrite by mostly re-organizing the code. Change the "???" message printed when target type is a TYPE_CODE_UNDEF into "". 2014-01-07 Joel Brobecker * ada-valprint.c (print_record): Delete, implementation inlined... (ada_val_print_struct_union): ... here. Remove call to ada_check_typedef in inlined implementation. 2014-01-07 Joel Brobecker * ada-valprint.c (ada_val_print_gnat_array): New function, extracted from ada_val_print_1; (ada_val_print_ptr, ada_val_print_num, ada_val_print_enum) (ada_val_print_flt, ada_val_print_struct_union) (ada_val_print_ref): Likewise. (ada_val_print_1): Delete variables i and elttype. Replace extracted-out code by call to corresponding new functions. 2014-01-07 Joel Brobecker * ada-valprint.c (ada_val_print_1): Remove call to gdb_flush. 2014-01-07 Joel Brobecker * ada-valprint.c (ada_val_print_1): Replace calls to ada_val_print_1 by calls to val_print. 2014-01-07 Joel Brobecker * ada-valprint.c (ada_val_print_1): Add parameter "language". Update calls to self accordingly. Replace calls to c_val_print by calls to val_print. 2014-01-07 Joel Brobecker * ada-valprint.c (print_record): Delete declaration. (adjust_type_signedness, ada_val_print_1): Likewise. (ada_val_print): Move function implementation down. (print_variant_part, print_field_values, print_record): Move function implementation up. 2014-01-07 Joel Brobecker * python/py-type.c (typy_get_name): New function. (type_object_getset): Add entry for attribute "name". * NEWS: Add entry mentioning this new attribute. 2014-01-07 Yao Qi * gnu-nat.c (set_exceptions_cmd): Remove an empty body 'if' statement. 2014-01-07 Yao Qi * gnu-nat.c (info_port_rights): Add qualifier const to argument args. 2014-01-07 Yao Qi * gnu-nat.c (trace_me): Use 'void' for empty argument list. 2014-01-07 Yao Qi * gnu-nat.c (make_inf) Update declaration. (make_inf): Make it static. (inf_set_traced): Likewise. (inf_port_to_thread, inf_task_died_status): Likewise. 2014-01-07 Yao Qi * gnu-nat.c (inf_tid_to_proc): Remove declaration. 2014-01-07 Yao Qi * gnu-nat.c (_initialize_gnu_nat): Declare. 2014-01-07 Yao Qi * gdbarch.sh (byte_order, byte_order_for_code): Change type to 'enum bfd_endian'. (struct gdbarch_info) : Change type to 'enum bfd_endian'. : Likewise. * gdbarch.c, gdbarch.h: Regenerated. 2014-01-06 Sasha Smundak * jit.c: (jit_reader_load_command): Fix JIT reader path creation. 2014-01-06 Tom Tromey * doublest.c (convert_doublest_to_floatformat): Use const, not CONST. * somread.c (som_symtab_read): Likewise. 2014-01-07 Hui Zhu * gdb_bfd.c (gdb_bfd_stash_filename): Removed. (gdb_bfd_open): Removed gdb_bfd_stash_filename. (gdb_bfd_fopen): Ditto. (gdb_bfd_openr): Ditto. (gdb_bfd_openw): Ditto. (gdb_bfd_openr_iovec): Ditto. (gdb_bfd_fdopenr): Ditto. * gdb_bfd.h (gdb_bfd_stash_filename): Removed. * solib-aix.c (solib_aix_bfd_open): Alloc object_bfd->filename with xstrdup. * solib-darwin.c (darwin_bfd_open): Alloc res->filename with xstrdup. * symfile-mem.c (symbol_file_add_from_memory): Removed gdb_bfd_stash_filename. 2014-01-03 Doug Evans * nat/linux-waitpid.c (linux_debug): Remove extraneous \n from output. 2014-01-01 Joel Brobecker Update year range in copyright notice of all files. 2014-01-01 Joel Brobecker * top.c (print_gdb_version): Set copyright year to 2014. 2014-01-01 Joel Brobecker * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2013. For older changes see ChangeLog-2013. Local Variables: mode: change-log left-margin: 8 fill-column: 74 version-control: never coding: utf-8 End: