2014-08-22 Yao Qi * ctf.c (CTF_FILE_MIN_SIZE): Remove. (ctf_end): Remove code. 2014-08-21 Jan Kratochvil * linux-tdep.c (linux_corefile_thread_callback): Ignore THREAD_EXITED. (linux_make_corefile_notes): call update_thread_list, protected against exceptions. 2014-08-21 Pedro Alves * infcmd.c (attach_command): Remove comment. 2014-08-21 Bin Cheng * aarch64-linux-nat.c (dr_changed_t): Change the type from unsigned LONGEST to ULONGEST. 2014-08-20 Pedro Alves * Makefile.in (check-read1): New rule. 2014-08-20 Joel Brobecker * value.c (value_from_contents_and_address): Strip resolved_type's typedef layers before checking its TYPE_DATA_LOCATION. 2014-08-20 Pedro Alves * value.c (value_contents_bits_eq): Initialize l,h for gcc -Wall. 2014-08-20 Yao Qi * amd64-tdep.c (amd64_classify): Add a blank line after the example. Move "*/" to a new line. * arm-tdep.c (arm_vfp_cprc_sub_candidate): Likewise. * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Likewise. * dwarf2read.c (psymtab_include_file_name): Likewise. 2014-08-19 Andrew Burgess Pedro Alves PR symtab/14604 PR symtab/14605 * ada-lang.c (coerce_unspec_val_to_type): Use value_contents_copy_raw. * ada-valprint.c (val_print_packed_array_elements): Adjust. * c-valprint.c (c_val_print): Use value_bits_any_optimized_out. * cp-valprint.c (cp_print_value_fields): Let the common printing code handle optimized out values. (cp_print_value_fields_rtti): Use value_bits_any_optimized_out. * d-valprint.c (dynamic_array_type): Use value_bits_any_optimized_out. * dwarf2loc.c (entry_data_value_funcs): Remove check_validity and check_any_valid fields. (check_pieced_value_bits): Delete and inline ... (check_pieced_synthetic_pointer): ... here. (check_pieced_value_validity): Delete. (check_pieced_value_invalid): Delete. (pieced_value_funcs): Remove check_validity and check_any_valid fields. (read_pieced_value): Use mark_value_bits_optimized_out. (write_pieced_value): Switch to use mark_value_bytes_optimized_out. (dwarf2_evaluate_loc_desc_full): Copy the value contents instead of assuming the whole value is optimized out. * findvar.c (read_frame_register_value): Remove special handling of optimized out registers. (value_from_register): Use mark_value_bytes_optimized_out. * frame-unwind.c (frame_unwind_got_optimized): Use mark_value_bytes_optimized_out. * jv-valprint.c (java_value_print): Adjust. (java_print_value_fields): Let the common printing code handle optimized out values. * mips-tdep.c (mips_print_register): Remove special handling of optimized out registers. * opencl-lang.c (lval_func_check_validity): Delete. (lval_func_check_any_valid): Delete. (opencl_value_funcs): Remove check_validity and check_any_valid fields. * p-valprint.c (pascal_object_print_value_fields): Let the common printing code handle optimized out values. * stack.c (read_frame_arg): Remove special handling of optimized out values. Fetch both VAL and ENTRYVAL before comparing contents. Adjust to value_available_contents_eq rename. * valprint.c (valprint_check_validity) (val_print_scalar_formatted): Use value_bits_any_optimized_out. (val_print_array_elements): Adjust. * value.c (struct value) : Now a VEC(range_s). (value_bits_any_optimized_out): New function. (value_entirely_covered_by_range_vector): New function, factored out from value_entirely_unavailable. (value_entirely_unavailable): Reimplement. (value_entirely_optimized_out): New function. (insert_into_bit_range_vector): New function, factored out from mark_value_bits_unavailable. (mark_value_bits_unavailable): Reimplement. (struct ranges_and_idx): New struct. (find_first_range_overlap_and_match): New function, factored out from value_available_contents_bits_eq. (value_available_contents_bits_eq): Rename to ... (value_contents_bits_eq): ... this. Check both unavailable contents and optimized out contents. (value_available_contents_eq): Rename to ... (value_contents_eq): ... this. (allocate_value_lazy): Remove reference to the old optimized_out boolean. (allocate_optimized_out_value): Use mark_value_bytes_optimized_out. (require_not_optimized_out): Adjust to check whether the optimized_out vec is empty. (ranges_copy_adjusted): New function, factored out from value_contents_copy_raw. (value_contents_copy_raw): Also copy the optimized out ranges. Assert the destination ranges aren't optimized out. (value_contents_copy): Update comment, remove call to require_not_optimized_out. (value_contents_equal): Adjust to check whether the optimized_out vec is empty. (set_value_optimized_out, value_optimized_out_const): Delete. (mark_value_bytes_optimized_out, mark_value_bits_optimized_out): New functions. (value_entirely_optimized_out, value_bits_valid): Delete. (value_copy): Take a VEC copy of the 'optimized_out' field. (value_primitive_field): Remove special handling of optimized out. (value_fetch_lazy): Assert that lazy values have no unavailable regions. Use value_bits_any_optimized_out. Remove some special handling for optimized out values. * value.h: Add intro comment about and . (struct lval_funcs): Remove check_validity and check_any_valid fields. (set_value_optimized_out, value_optimized_out_const): Remove. (mark_value_bytes_optimized_out, mark_value_bits_optimized_out): New declarations. (value_bits_any_optimized_out): New declaration. (value_bits_valid): Delete declaration. (value_available_contents_eq): Rename to ... (value_contents_eq): ... this, and extend comments. 2014-08-19 Jan Kratochvil Fix -fsanitize=address on unreadable inferior strings. * valprint.c (val_print_string): Fix access before BUFFER. 2014-08-19 Simon Marchi * target.c (target_struct_size): Remove. (target_struct_allocsize): Remove. (DEFAULT_ALLOCSIZE): Remove. (target_ops_p): New typedef. (DEF_VEC_P (target_ops_p)): New vector type. (target_structs): Change type to VEC (target_ops_p). (add_target_with_completer): Replace "push" code by VEC_safe_push. (find_default_run_target): Rewrite for loop following changes to target_structs. 2014-08-19 Joel Brobecker * value.c (value_from_pointer): Remove use of resolve_dynamic_type. Adjust code accordingly. Adjust function description comment. 2014-08-19 Yao Qi * arm-tdep.c (arm_vfp_cprc_sub_candidate): Handle _Complex types. 2014-08-19 Alan Modra * acinclude.m4 (GDB_AC_CHECK_BFD): Don't add -ldl. * config.in: Regenerate. * configure: Regenerate. 2014-08-19 Tom Tromey Gary Benson * common/common-debug.h: New file. * common/common-debug.c: Likewise. * debug.c: Likewise. * Makefile.in (SFILES): Add common/common-debug.c. (HFILES_NO_SRCDIR): Add common/common-debug.h. (COMMON_OBS): Add common-debug.o and debug.o. (common-debug.o): New rule. * common/common-defs.h: Include common-debug.h. * common/agent.c (debug_agent_printf): New function. (DEBUG_AGENT): Redefine. * nat/i386-dregs.c (debug_printf): Undefine. 2014-08-19 Gary Benson * common/common-defs.h: Include print-utils.h. * utils.h: Do not include print-utils.h. 2014-08-19 Tom Tromey Gary Benson * common/common-types.h: New file. * Makefile.in (HFILES_NO_SRCDIR): Add common/common-types.h. * common/common-defs.h: Include common-types.h. * defs.h (gdb_byte, CORE_ADDR, CORE_ADDR_MAX, LONGEST) (ULONGEST): Remove. 2014-08-19 Tom Tromey Gary Benson * common/errors.h: New file. * common/errors.c: Likewise. * Makefile.in (SFILES): Add common/errors.c. (HFILES_NO_SRCDIR): Add common/errors.h. (COMMON_OBS): Add errors.o. (errors.o): New rule. * common/common-defs.h: Include errors.h. * utils.h (perror_with_name, error, verror, warning, vwarning): Don't declare. * common/common-utils.h: (malloc_failure, internal_error): Likewise. 2014-08-19 Gary Benson * utils.c (internal_vproblem): Always print the message. 2014-08-18 Doug Evans * ada-typeprint.c (print_range): Initialize lo,hi for gcc -Wall. 2014-08-18 Joel Brobecker * ada-typeprint.c (type_is_full_subrange_of_target_type): Return 0 if TYPE is dynamic. (print_range): Add handling of dynamic ranges. 2014-08-18 Keven Boell Joel Brobecker * gdbtypes.h (struct main_type): Add field "data_location". (TYPE_DATA_LOCATION, TYPE_DATA_LOCATION_BATON) (TYPE_DATA_LOCATION_ADDR, TYPE_DATA_LOCATION_KIND): New macros. * gdbtypes.c (is_dynamic_type): Return 1 if the type has a dynamic data location. (resolve_dynamic_type): Add DW_AT_data_location handling. (copy_recursive, copy_type): Copy the data_location information when present. * dwarf2read.c (set_die_type): Add DW_AT_data_location handling. * value.c (value_from_contents_and_address): Add DW_AT_data_location handling. 2014-08-18 Keven Boell Joel Brobecker * dwarf2expr.h (struct dwarf_expr_context_funcs): Uncomment field "get_object_address". * dwarf2expr.c (execute_stack_op): Add handling for DW_OP_push_object_address. * dwarf2loc.h (dwarf2_evaluate_property): Add "address" field. * dwarf2loc.c (struct dwarf_expr_baton): Add field "obj_address". (dwarf_expr_push_dwarf_reg_entry_value): Set baton_local.obj_address. (dwarf_expr_get_obj_addr): New function. (dwarf_expr_ctx_funcs): Add get_object_address field. (dwarf2_evaluate_loc_desc_full): Set baton.obj_address. (dwarf2_locexpr_baton_eval): Add parameter "addr". Use it. (dwarf2_evaluate_property): Add parameter "address". Use it. (needs_get_obj_addr): New function. (needs_frame_ctx_funcs): Add get_object_address field. (dwarf2_compile_expr_to_ax): Add DW_OP_push_object_address handling. * gdbtypes.c (resolve_dynamic_range): Add "addr" field. Use it. (resolve_dynamic_array): Likewise. 2014-08-18 Joel Brobecker * ada-lang.c (ada_evaluate_subexp) : When noside is EVAL_AVOID_SIDE_EFFECTS, only return a statically fixed value for records and unions for which some GNAT encodings are present. 2014-08-18 Joel Brobecker * ada-lang.c (ada_evaluate_subexp) : Slight code rewrite to avoid "else if" and "else" constructs. Should be a no-op in practice. 2014-08-18 Joel Brobecker * ada-lang.c (ada_evaluate_subexp) : Fix identation of lexical block. 2014-08-15 Siva Chandra Reddy PR c++/17132 * eval.c: Update all calls to find_overload_match. * valarith.c: Likewise. (value_user_defined_cpp_op, value_user_defined_op): New argument NOSIDE. Update all callers. * valops.c (find_overload_match): New argument NOSIDE. * value.h (find_overload_match): Update signature. 2014-08-15 Siva Chandra Reddy * python/lib/gdb/command/xmethods.py (set_xm_status1): Use the 'items' methods instead of 'iteritems' method on dictionaries. 2014-08-15 Doug Evans * dwarf2read.c (dwarf_decode_lines_1): Move definition of adj_opcode closer to use. 2014-08-15 Doug Evans * dwarf2read.c (dwarf_decode_lines_1): Add comment. 2014-08-15 Doug Evans * dwarf2read.c (dwarf_decode_lines_1): Delete local "column", unused. 2014-08-15 Doug Evans * dwarf2read.c (dwarf_decode_lines_1): Delete local basic_block, unused. 2014-08-15 Eli Zaretskii * dcache.h: Include target.h, to avoid compile time warnings. 2014-08-15 Joel Brobecker * gdbarch.sh: #include "frame.h" in gdbarch.h. Delete "struct frame_info" partial declaration. * gdbarch.h: Regenerate. 2014-08-15 Yao Qi * dwarf2read.c (dwarf_decode_lines_1): Remove parameter 'pst'. Add parameter 'decode_for_pst_p'. Callers update. 2014-08-13 Yao Qi PR build/17104 * configure.ac: Use local variable 'pos'. * configure: Regenerated. 2014-08-11 Doug Evans * solib.c (solib_read_symbols): Delete "Loaded symbols for ..." message, it is redundant with "Reading symbols from ..." message. 2014-08-10 Doug Evans * linux-nat.c (linux_nat_thread_address_space): Delete dead code. 2014-08-09 Yao Qi PR remote/9053 * remote.c (remote_xfer_partial): Remove dead code. 2014-08-07 Andreas Arnez * ia64-linux-tdep.c: Include "regset.h". (ia64_linux_gregmap, ia64_linux_fpregmap): New register maps. (IA64_LINUX_GREGS_SIZE, IA64_LINUX_FPREGS_SIZE): New macros. (ia64_linux_supply_fpregset): New function. (ia64_linux_gregset, ia64_linux_fpregset): New regsets. (ia64_linux_regset_from_core_section): New function. (ia64_linux_init_abi): Set regset_from_core_section gdbarch method. 2014-08-07 Andreas Arnez * m68klinux-tdep.c: Include "regset.h". (m68k_linux_gregmap, m68k_linux_fpregmap): New register maps. (M68K_LINUX_GREGS_SIZE, M68K_LINUX_FPREGS_SIZE): New macros. (m68k_linux_gregset, m68k_linux_fpregset): New regsets. (m68k_linux_regset_from_core_section): New function. (m68k_linux_init_abi): Set regset_from_core_section gdbarch method. 2014-08-07 Andreas Arnez * tilegx-linux-tdep.c (tilegx_linux_supply_regset): Delete function. Move logic to... (tilegx_linux_regmap): ... this new register map. (tilegx_linux_regset): Refer to register map, replace supply method by regcache_supply_regset, and add collect method. * tilegx-tdep.h (enum tilegx_regnum): New enum value TILEGX_FIRST_EASY_REGNUM. 2014-08-07 Andreas Arnez * score-tdep.c (score7_linux_supply_gregset): Reduce to small stub that calls regcache_supply_regset and handles the EPC register separately. Move main logic to... (score7_linux_gregmap): ... this new register map. (SCORE7_LINUX_SIZEOF_GREGSET, SCORE7_LINUX_EPC_OFFSET): New macros. (score7_linux_gregset): Refer to register map. Add collect method. (score7_linux_regset_from_core_section): Replace sizeof elf_gregset_t by SCORE7_LINUX_SIZEOF_GREGSET. * score-tdep.h (enum gdb_regnum): New enum value SCORE_EPC_REGNUM. (struct regset): Delete unused forward declaraction. (struct pt_regs): Delete structure definition. (elf_gregset_t): Delete typedef. 2014-08-07 Andreas Arnez * nios2-linux-tdep.c (nios2_collect_gregset): New function. (nios2_core_regset): Add collect method. 2014-08-07 Andreas Arnez * m32r-linux-tdep.c (m32r_linux_supply_gregset): Make platform-independent and don't write to read-only input buffer. (m32r_linux_collect_gregset): New function. (m32r_linux_gregset): Add collect method. 2014-08-07 Andreas Arnez * hppa-linux-tdep.c (greg_map): Rename to... (hppa_linux_gregmap): ... this. Also convert to regcache_map_entry format. (hppa_linux_supply_regset): Delete function. (hppa_linux_supply_fpregset): Delete function. Move logic to... (hppa_linux_fpregmap): ... this new register map. (hppa_linux_regset, hppa_linux_fpregset): Refer to appropriate register map, replace supply method by regcache_supply_regset, and add collect method regcache_collect_regset. 2014-08-07 Andreas Arnez * frv-linux-tdep.c (FRV_PT_PSR, FRV_PT_ISR, FRV_PT_CCR) (FRV_PT_CCCR, FRV_PT_LR, FRV_PT_LCR, FRV_PT_PC, FRV_PT_GNER0) (FRV_PT_GNER1, FRV_PT_IACC0H, FRV_PT_IACC0L, FRV_PT_GR) (FRV_PT_TBR, FRV_PT_GR, FRV_PT_EXEC_FDPIC_LOADMAP) (FRV_PT_INTERP_FDPIC_LOADMAP): Delete macros. (frv_linux_gregmap, frv_linux_fpregmap): New register maps. (frv_linux_supply_gregset): Replace main logic by call to regcache_supply_regset, but keep clearing gr32-gr63. (frv_linux_supply_fpregset): Delete function. (frv_linux_gregset): Refer to appropriate register map and add regcache_collect_regset as the collect method. (frv_linux_fpregset): Likewise. Also exchange the supply method by regcache_supply_regset. 2014-08-07 Andreas Arnez * alpha-linux-tdep.c (alpha_linux_supply_gregset): Replace logic by call to alpha_supply_int_regs. (alpha_linux_collect_gregset): New function. (alpha_linux_supply_fpregset): Replace logic by call to alpha_supply_fp_regs. (alpha_linux_collect_fpregset): New function. (alpha_linux_gregset, alpha_linux_fpregset): Add collect method. 2014-08-07 Andreas Arnez * aarch64-linux-nat.c (fill_gregset, fill_fpregset): Replace logic by call to regcache_collect_regset. (supply_gregset, supply_fpregset): Call regcache_supply_regset instead of aarch64_linux_supply_gregset/_fpregset. * aarch64-linux-tdep.c (AARCH64_LINUX_SIZEOF_GREGSET) (AARCH64_LINUX_SIZEOF_FPREGSET): Delete macros here, move to header file instead. (aarch64_linux_supply_gregset, supply_gregset_from_core) (aarch64_linux_suply_fpregset, supply_fpregset_from_core): Delete functions. Move logic to ... (aarch64_linux_gregmap, aarch64_linux_fpregmap): ... these new register maps. (aarch64_linux_gregset, aarch64_linux_fpregset): Make global, refer to new register maps, replace *_regset_from_core by regcache_supply_regset, and also use regcache_collect_regset. * aarch64-linux-tdep.h: Include "regset.h". (aarch64_linux_supply_gregset, aarch64_linux_supply_fpregset): Delete prototypes. (AARCH64_LINUX_SIZEOF_GREGSET, AARCH64_LINUX_SIZEOF_FPREGSET): New macros, moved from C source file. (aarch64_linux_gregset, aarch64_linux_fpregset): New global variable declarations. 2014-08-07 Andreas Arnez * s390-linux-nat.c: Include "regset.h". (regmap_gregset): Delete macro. (s390_64_regmap_gregset): New register map for regcache_supply/_collect_regset. (s390_64_gregset): New regset. (S390_PSWM_OFFSET, S390_PSWA_OFFSET): New macros. (regmap_fpregset): Delete macro. (s390_native_supply, s390_native_collect): Delete functions. (supply_gregset, fill_gregset): Replace s390-specific regmap handling by a call to regcache_supply/_collect_regset. (supply_fpregset, fill_fpregset): Call regcache_supply/ _collect_regset instead of s390_native_supply/_collect. (fetch_regset, store_regset): Likewise. Also change the last parameter to a regset instead of a regmap. (s390_linux_fetch_inferior_registers) (390_linux_store_inferior_registers): Adjust last parameter in calls to fetch_regset and store_regset. * s390-linux-tdep.c (s390_regmap_gregset): Rename to... (s390_gregmap): ... this. Also make static const and convert to regcache_map_entry format. (s390x_regmap_gregset): Delete. (s390_regmap_fpregset): Rename to... (s390_fpregmap): ... this. Make static const and convert to regcache_map_entry format. (s390_regmap_upper, s390_regmap_last_break) (s390x_regmap_last_break, s390_regmap_system_call) (s390_regmap_tdb): Likewise. (s390_supply_regset, s390_collect_regset): Remove functions. (s390_supply_tdb_regset): Call regcache_supply_regset instead of s390_supply_regset. (s390_gregset, s390_fpregset, s390_upper_regset) (s390_last_break_regset, s390x_last_break_regset) (s390_system_call_regset, s390_tdb_regset): Make global and replace s390_supply/_collect_regset by regcache_supply/ _collect_regset. (s390x_gregset): Delete. (s390_gdbarch_init): Replace s390x_gregset by s390_gregset. * s390-linux-tdep.h (s390_regmap_gregset, s390x_regmap_gregset) (s390_regmap_fpregset, s390_regmap_last_break) (s390x_regmap_last_break, s390_regmap_system_call) (s390_regmap_tdb): Delete global variable declarations. (s390_gregset, s390_fpregset, s390_last_break_regset) (s390x_last_break_regset, s390_system_call_regset) (s390_tdb_regset): New global variable declarations. 2014-08-07 Andreas Arnez * regcache.c: Include "regset.h". (regcache_transfer_regset): New local function. (regcache_supply_regset, regcache_collect_regset): New functions. * regcache.h (struct regcache_map_entry): New structure. (REGCACHE_MAP_SKIP): New enum value. (regcache_supply_regset, regcache_collect_regset): New prototypes. 2014-08-07 Andreas Arnez * regset.h (struct regset): Rename 'descr' field to 'regmap'. * ppc-linux-tdep.c (ppc_linux_supply_gregset) (ppc_linux_collect_gregset ): Likewise. * rs6000-tdep.c (ppc_supply_gregset, ppc_supply_fpregset) (ppc_supply_vrregset, ppc_collect_gregset, ppc_collect_fpregset) (ppc_collect_vrregset): Likewise. * s390-linux-tdep.c (s390_supply_regset, s390_collect_regset): Likewise. 2014-08-07 Yao Qi * corelow.c (core_xfer_partial): Replace 0 with TARGET_XFER_EOF. * remote-m32r-sdi.c (m32r_xfer_memory): Likewise. * remote.c (remote_read_bytes): Likewise. 2014-08-07 Yao Qi * dwarf2read.c (struct dwarf2_per_cu_data) : Tweak comments. 2014-08-07 Yao Qi PR remote/17230 * remote-mips.c (mips_xfer_memory): Set *xfered_len and return TARGET_XFER_OK instead of 0. 2014-08-07 Gary Benson * common/common-defs.h: Include errno.h. * defs.h: Do not include errno.h. * ada-typeprint.c: Likewise. * c-typeprint.c: Likewise. * core-regset.c: Likewise. * corefile.c: Likewise. * corelow.c: Likewise. * event-loop.c: Likewise. * f-typeprint.c: Likewise. * gnu-nat.c: Likewise. * go32-nat.c: Likewise. * i386gnu-nat.c: Likewise. * m2-typeprint.c: Likewise. * nat/linux-btrace.c: Likewise. * p-typeprint.c: Likewise. * procfs.c: Likewise. * remote-sim.c: Likewise. * rs6000-nat.c: Likewise. * target.c: Likewise. * typeprint.c: Likewise. * ui-file.c: Likewise. * valops.c: Likewise. * valprint.c: Likewise. 2014-08-07 Gary Benson * common/common-defs.h: Include string.h. * aarch64-tdep.c: Do not include string.h. * ada-exp.y: Likewise. * ada-lang.c: Likewise. * ada-lex.l: Likewise. * ada-typeprint.c: Likewise. * ada-valprint.c: Likewise. * aix-thread.c: Likewise. * alpha-linux-tdep.c: Likewise. * alpha-mdebug-tdep.c: Likewise. * alpha-nat.c: Likewise. * alpha-osf1-tdep.c: Likewise. * alpha-tdep.c: Likewise. * alphanbsd-tdep.c: Likewise. * amd64-dicos-tdep.c: Likewise. * amd64-linux-tdep.c: Likewise. * amd64-nat.c: Likewise. * amd64-sol2-tdep.c: Likewise. * amd64fbsd-tdep.c: Likewise. * amd64obsd-tdep.c: Likewise. * arch-utils.c: Likewise. * arm-linux-nat.c: Likewise. * arm-linux-tdep.c: Likewise. * arm-tdep.c: Likewise. * arm-wince-tdep.c: Likewise. * armbsd-tdep.c: Likewise. * armnbsd-nat.c: Likewise. * armnbsd-tdep.c: Likewise. * armobsd-tdep.c: Likewise. * avr-tdep.c: Likewise. * ax-gdb.c: Likewise. * ax-general.c: Likewise. * bcache.c: Likewise. * bfin-tdep.c: Likewise. * breakpoint.c: Likewise. * build-id.c: Likewise. * buildsym.c: Likewise. * c-exp.y: Likewise. * c-lang.c: Likewise. * c-typeprint.c: Likewise. * c-valprint.c: Likewise. * charset.c: Likewise. * cli-out.c: Likewise. * cli/cli-cmds.c: Likewise. * cli/cli-decode.c: Likewise. * cli/cli-dump.c: Likewise. * cli/cli-interp.c: Likewise. * cli/cli-logging.c: Likewise. * cli/cli-script.c: Likewise. * cli/cli-setshow.c: Likewise. * cli/cli-utils.c: Likewise. * coffread.c: Likewise. * common/agent.c: Likewise. * common/buffer.c: Likewise. * common/buffer.h: Likewise. * common/common-utils.c: Likewise. * common/filestuff.c: Likewise. * common/filestuff.c: Likewise. * common/format.c: Likewise. * common/print-utils.c: Likewise. * common/rsp-low.c: Likewise. * common/signals.c: Likewise. * common/vec.h: Likewise. * common/xml-utils.c: Likewise. * core-regset.c: Likewise. * corefile.c: Likewise. * corelow.c: Likewise. * cp-abi.c: Likewise. * cp-name-parser.y: Likewise. * cp-support.c: Likewise. * cp-valprint.c: Likewise. * cris-tdep.c: Likewise. * d-exp.y: Likewise. * darwin-nat.c: Likewise. * dbxread.c: Likewise. * dcache.c: Likewise. * demangle.c: Likewise. * dicos-tdep.c: Likewise. * disasm.c: Likewise. * doublest.c: Likewise. * dsrec.c: Likewise. * dummy-frame.c: Likewise. * dwarf2-frame.c: Likewise. * dwarf2loc.c: Likewise. * dwarf2read.c: Likewise. * elfread.c: Likewise. * environ.c: Likewise. * eval.c: Likewise. * event-loop.c: Likewise. * exceptions.c: Likewise. * exec.c: Likewise. * expprint.c: Likewise. * f-exp.y: Likewise. * f-lang.c: Likewise. * f-typeprint.c: Likewise. * f-valprint.c: Likewise. * fbsd-nat.c: Likewise. * findcmd.c: Likewise. * findvar.c: Likewise. * fork-child.c: Likewise. * frame.c: Likewise. * frv-linux-tdep.c: Likewise. * frv-tdep.c: Likewise. * gdb.c: Likewise. * gdb_bfd.c: Likewise. * gdbarch.c: Likewise. * gdbarch.sh: Likewise. * gdbtypes.c: Likewise. * gnu-nat.c: Likewise. * gnu-v2-abi.c: Likewise. * gnu-v3-abi.c: Likewise. * go-exp.y: Likewise. * go-lang.c: Likewise. * go32-nat.c: Likewise. * guile/guile.c: Likewise. * guile/scm-auto-load.c: Likewise. * hppa-hpux-tdep.c: Likewise. * hppa-linux-nat.c: Likewise. * hppanbsd-tdep.c: Likewise. * hppaobsd-tdep.c: Likewise. * i386-cygwin-tdep.c: Likewise. * i386-dicos-tdep.c: Likewise. * i386-linux-tdep.c: Likewise. * i386-nto-tdep.c: Likewise. * i386-sol2-tdep.c: Likewise. * i386-tdep.c: Likewise. * i386bsd-tdep.c: Likewise. * i386gnu-nat.c: Likewise. * i386nbsd-tdep.c: Likewise. * i386obsd-tdep.c: Likewise. * i387-tdep.c: Likewise. * ia64-libunwind-tdep.c: Likewise. * ia64-linux-nat.c: Likewise. * inf-child.c: Likewise. * inf-ptrace.c: Likewise. * inf-ttrace.c: Likewise. * infcall.c: Likewise. * infcmd.c: Likewise. * inflow.c: Likewise. * infrun.c: Likewise. * interps.c: Likewise. * iq2000-tdep.c: Likewise. * irix5-nat.c: Likewise. * jv-exp.y: Likewise. * jv-lang.c: Likewise. * jv-typeprint.c: Likewise. * jv-valprint.c: Likewise. * language.c: Likewise. * linux-fork.c: Likewise. * linux-nat.c: Likewise. * lm32-tdep.c: Likewise. * m2-exp.y: Likewise. * m2-typeprint.c: Likewise. * m32c-tdep.c: Likewise. * m32r-linux-nat.c: Likewise. * m32r-linux-tdep.c: Likewise. * m32r-rom.c: Likewise. * m32r-tdep.c: Likewise. * m68hc11-tdep.c: Likewise. * m68k-tdep.c: Likewise. * m68kbsd-tdep.c: Likewise. * m68klinux-nat.c: Likewise. * m68klinux-tdep.c: Likewise. * m88k-tdep.c: Likewise. * machoread.c: Likewise. * macrocmd.c: Likewise. * main.c: Likewise. * mdebugread.c: Likewise. * mem-break.c: Likewise. * memattr.c: Likewise. * memory-map.c: Likewise. * mep-tdep.c: Likewise. * mi/mi-cmd-break.c: Likewise. * mi/mi-cmd-disas.c: Likewise. * mi/mi-cmd-env.c: Likewise. * mi/mi-cmd-stack.c: Likewise. * mi/mi-cmd-var.c: Likewise. * mi/mi-cmds.c: Likewise. * mi/mi-console.c: Likewise. * mi/mi-getopt.c: Likewise. * mi/mi-interp.c: Likewise. * mi/mi-main.c: Likewise. * mi/mi-parse.c: Likewise. * microblaze-rom.c: Likewise. * microblaze-tdep.c: Likewise. * mingw-hdep.c: Likewise. * minidebug.c: Likewise. * minsyms.c: Likewise. * mips-irix-tdep.c: Likewise. * mips-linux-tdep.c: Likewise. * mips-tdep.c: Likewise. * mips64obsd-tdep.c: Likewise. * mipsnbsd-tdep.c: Likewise. * mipsread.c: Likewise. * mn10300-linux-tdep.c: Likewise. * mn10300-tdep.c: Likewise. * monitor.c: Likewise. * moxie-tdep.c: Likewise. * mt-tdep.c: Likewise. * nat/linux-btrace.c: Likewise. * nat/linux-osdata.c: Likewise. * nat/linux-procfs.c: Likewise. * nat/linux-ptrace.c: Likewise. * nat/linux-waitpid.c: Likewise. * nbsd-tdep.c: Likewise. * nios2-linux-tdep.c: Likewise. * nto-procfs.c: Likewise. * nto-tdep.c: Likewise. * objc-lang.c: Likewise. * objfiles.c: Likewise. * opencl-lang.c: Likewise. * osabi.c: Likewise. * osdata.c: Likewise. * p-exp.y: Likewise. * p-lang.c: Likewise. * p-typeprint.c: Likewise. * parse.c: Likewise. * posix-hdep.c: Likewise. * ppc-linux-nat.c: Likewise. * ppc-sysv-tdep.c: Likewise. * ppcfbsd-tdep.c: Likewise. * ppcnbsd-tdep.c: Likewise. * ppcobsd-tdep.c: Likewise. * printcmd.c: Likewise. * procfs.c: Likewise. * prologue-value.c: Likewise. * python/py-auto-load.c: Likewise. * python/py-gdb-readline.c: Likewise. * ravenscar-thread.c: Likewise. * regcache.c: Likewise. * registry.c: Likewise. * remote-fileio.c: Likewise. * remote-m32r-sdi.c: Likewise. * remote-mips.c: Likewise. * remote-notif.c: Likewise. * remote-sim.c: Likewise. * remote.c: Likewise. * reverse.c: Likewise. * rs6000-aix-tdep.c: Likewise. * ser-base.c: Likewise. * ser-go32.c: Likewise. * ser-mingw.c: Likewise. * ser-pipe.c: Likewise. * ser-tcp.c: Likewise. * ser-unix.c: Likewise. * serial.c: Likewise. * sh-tdep.c: Likewise. * sh64-tdep.c: Likewise. * shnbsd-tdep.c: Likewise. * skip.c: Likewise. * sol-thread.c: Likewise. * solib-dsbt.c: Likewise. * solib-frv.c: Likewise. * solib-osf.c: Likewise. * solib-som.c: Likewise. * solib-spu.c: Likewise. * solib-target.c: Likewise. * solib.c: Likewise. * somread.c: Likewise. * source.c: Likewise. * sparc-nat.c: Likewise. * sparc-sol2-tdep.c: Likewise. * sparc-tdep.c: Likewise. * sparc64-tdep.c: Likewise. * sparc64fbsd-tdep.c: Likewise. * sparc64nbsd-tdep.c: Likewise. * sparcnbsd-tdep.c: Likewise. * spu-linux-nat.c: Likewise. * spu-multiarch.c: Likewise. * spu-tdep.c: Likewise. * stabsread.c: Likewise. * stack.c: Likewise. * std-regs.c: Likewise. * symfile.c: Likewise. * symmisc.c: Likewise. * symtab.c: Likewise. * target.c: Likewise. * thread.c: Likewise. * tilegx-linux-nat.c: Likewise. * tilegx-tdep.c: Likewise. * top.c: Likewise. * tracepoint.c: Likewise. * tui/tui-command.c: Likewise. * tui/tui-data.c: Likewise. * tui/tui-disasm.c: Likewise. * tui/tui-file.c: Likewise. * tui/tui-layout.c: Likewise. * tui/tui-out.c: Likewise. * tui/tui-regs.c: Likewise. * tui/tui-source.c: Likewise. * tui/tui-stack.c: Likewise. * tui/tui-win.c: Likewise. * tui/tui-windata.c: Likewise. * tui/tui-winsource.c: Likewise. * typeprint.c: Likewise. * ui-file.c: Likewise. * ui-out.c: Likewise. * user-regs.c: Likewise. * utils.c: Likewise. * v850-tdep.c: Likewise. * valarith.c: Likewise. * valops.c: Likewise. * valprint.c: Likewise. * value.c: Likewise. * varobj.c: Likewise. * vax-tdep.c: Likewise. * vaxnbsd-tdep.c: Likewise. * vaxobsd-tdep.c: Likewise. * windows-nat.c: Likewise. * xcoffread.c: Likewise. * xml-support.c: Likewise. * xstormy16-tdep.c: Likewise. * xtensa-linux-nat.c: Likewise. 2014-08-07 Gary Benson * common/common-defs.h: Include gdb_assert.h. * aarch64-tdep.c: Do not include gdb_assert.h. * addrmap.c: Likewise. * aix-thread.c: Likewise. * alpha-linux-tdep.c: Likewise. * alpha-mdebug-tdep.c: Likewise. * alphanbsd-tdep.c: Likewise. * amd64-nat.c: Likewise. * amd64-tdep.c: Likewise. * amd64bsd-nat.c: Likewise. * amd64fbsd-nat.c: Likewise. * amd64fbsd-tdep.c: Likewise. * amd64nbsd-nat.c: Likewise. * amd64nbsd-tdep.c: Likewise. * amd64obsd-nat.c: Likewise. * amd64obsd-tdep.c: Likewise. * arch-utils.c: Likewise. * arm-tdep.c: Likewise. * armbsd-tdep.c: Likewise. * auxv.c: Likewise. * bcache.c: Likewise. * bfin-tdep.c: Likewise. * blockframe.c: Likewise. * breakpoint.c: Likewise. * bsd-kvm.c: Likewise. * bsd-uthread.c: Likewise. * buildsym.c: Likewise. * c-exp.y: Likewise. * c-lang.c: Likewise. * charset.c: Likewise. * cleanups.c: Likewise. * cli-out.c: Likewise. * cli/cli-decode.c: Likewise. * cli/cli-dump.c: Likewise. * cli/cli-logging.c: Likewise. * cli/cli-script.c: Likewise. * cli/cli-utils.c: Likewise. * coffread.c: Likewise. * common/common-utils.c: Likewise. * common/queue.h: Likewise. * common/signals.c: Likewise. * common/vec.h: Likewise. * complaints.c: Likewise. * completer.c: Likewise. * corelow.c: Likewise. * cp-abi.c: Likewise. * cp-name-parser.y: Likewise. * cp-namespace.c: Likewise. * cp-support.c: Likewise. * cris-tdep.c: Likewise. * dbxread.c: Likewise. * dictionary.c: Likewise. * doublest.c: Likewise. * dsrec.c: Likewise. * dummy-frame.c: Likewise. * dwarf2-frame-tailcall.c: Likewise. * dwarf2-frame.c: Likewise. * dwarf2expr.c: Likewise. * dwarf2loc.c: Likewise. * dwarf2read.c: Likewise. * eval.c: Likewise. * event-loop.c: Likewise. * exceptions.c: Likewise. * expprint.c: Likewise. * f-valprint.c: Likewise. * fbsd-nat.c: Likewise. * findvar.c: Likewise. * frame-unwind.c: Likewise. * frame.c: Likewise. * frv-tdep.c: Likewise. * gcore.c: Likewise. * gdb-dlfcn.c: Likewise. * gdb_bfd.c: Likewise. * gdbarch.c: Likewise. * gdbarch.sh: Likewise. * gdbtypes.c: Likewise. * gnu-nat.c: Likewise. * gnu-v3-abi.c: Likewise. * go-lang.c: Likewise. * guile/scm-exception.c: Likewise. * guile/scm-gsmob.c: Likewise. * guile/scm-lazy-string.c: Likewise. * guile/scm-math.c: Likewise. * guile/scm-pretty-print.c: Likewise. * guile/scm-safe-call.c: Likewise. * guile/scm-utils.c: Likewise. * guile/scm-value.c: Likewise. * h8300-tdep.c: Likewise. * hppa-hpux-nat.c: Likewise. * hppa-tdep.c: Likewise. * hppanbsd-tdep.c: Likewise. * hppaobsd-tdep.c: Likewise. * i386-darwin-nat.c: Likewise. * i386-darwin-tdep.c: Likewise. * i386-nto-tdep.c: Likewise. * i386-tdep.c: Likewise. * i386bsd-nat.c: Likewise. * i386fbsd-tdep.c: Likewise. * i386gnu-nat.c: Likewise. * i386nbsd-tdep.c: Likewise. * i386obsd-tdep.c: Likewise. * i387-tdep.c: Likewise. * ia64-libunwind-tdep.c: Likewise. * ia64-tdep.c: Likewise. * inf-ptrace.c: Likewise. * inf-ttrace.c: Likewise. * infcall.c: Likewise. * infcmd.c: Likewise. * infrun.c: Likewise. * inline-frame.c: Likewise. * interps.c: Likewise. * jv-lang.c: Likewise. * jv-typeprint.c: Likewise. * linux-fork.c: Likewise. * linux-nat.c: Likewise. * linux-thread-db.c: Likewise. * m32c-tdep.c: Likewise. * m32r-linux-nat.c: Likewise. * m32r-tdep.c: Likewise. * m68k-tdep.c: Likewise. * m68kbsd-nat.c: Likewise. * m68kbsd-tdep.c: Likewise. * m88k-tdep.c: Likewise. * machoread.c: Likewise. * macroexp.c: Likewise. * macrotab.c: Likewise. * maint.c: Likewise. * mdebugread.c: Likewise. * memory-map.c: Likewise. * mep-tdep.c: Likewise. * mi/mi-common.c: Likewise. * microblaze-tdep.c: Likewise. * mingw-hdep.c: Likewise. * mips-linux-nat.c: Likewise. * mips-linux-tdep.c: Likewise. * mips-tdep.c: Likewise. * mips64obsd-tdep.c: Likewise. * mipsnbsd-tdep.c: Likewise. * mn10300-linux-tdep.c: Likewise. * mn10300-tdep.c: Likewise. * moxie-tdep.c: Likewise. * mt-tdep.c: Likewise. * nat/linux-btrace.c: Likewise. * nat/linux-osdata.c: Likewise. * nat/linux-ptrace.c: Likewise. * nat/mips-linux-watch.c: Likewise. * nios2-linux-tdep.c: Likewise. * nios2-tdep.c: Likewise. * objc-lang.c: Likewise. * objfiles.c: Likewise. * obsd-nat.c: Likewise. * opencl-lang.c: Likewise. * osabi.c: Likewise. * parse.c: Likewise. * ppc-linux-nat.c: Likewise. * ppc-sysv-tdep.c: Likewise. * ppcfbsd-nat.c: Likewise. * ppcfbsd-tdep.c: Likewise. * ppcnbsd-nat.c: Likewise. * ppcnbsd-tdep.c: Likewise. * ppcobsd-nat.c: Likewise. * ppcobsd-tdep.c: Likewise. * printcmd.c: Likewise. * procfs.c: Likewise. * prologue-value.c: Likewise. * psymtab.c: Likewise. * python/py-lazy-string.c: Likewise. * python/py-value.c: Likewise. * regcache.c: Likewise. * reggroups.c: Likewise. * registry.c: Likewise. * remote-sim.c: Likewise. * remote.c: Likewise. * rs6000-aix-tdep.c: Likewise. * rs6000-tdep.c: Likewise. * s390-linux-tdep.c: Likewise. * score-tdep.c: Likewise. * ser-base.c: Likewise. * ser-mingw.c: Likewise. * sh-tdep.c: Likewise. * sh64-tdep.c: Likewise. * solib-darwin.c: Likewise. * solib-spu.c: Likewise. * solib-svr4.c: Likewise. * source.c: Likewise. * sparc-nat.c: Likewise. * sparc-sol2-tdep.c: Likewise. * sparc-tdep.c: Likewise. * sparc64-sol2-tdep.c: Likewise. * sparc64-tdep.c: Likewise. * sparc64fbsd-tdep.c: Likewise. * sparc64nbsd-tdep.c: Likewise. * sparc64obsd-tdep.c: Likewise. * sparcnbsd-tdep.c: Likewise. * sparcobsd-tdep.c: Likewise. * spu-multiarch.c: Likewise. * spu-tdep.c: Likewise. * stabsread.c: Likewise. * stack.c: Likewise. * symfile.c: Likewise. * symtab.c: Likewise. * target-descriptions.c: Likewise. * target-memory.c: Likewise. * target.c: Likewise. * tic6x-linux-tdep.c: Likewise. * tic6x-tdep.c: Likewise. * tilegx-linux-nat.c: Likewise. * tilegx-tdep.c: Likewise. * top.c: Likewise. * tramp-frame.c: Likewise. * tui/tui-out.c: Likewise. * tui/tui-winsource.c: Likewise. * ui-out.c: Likewise. * user-regs.c: Likewise. * utils.c: Likewise. * v850-tdep.c: Likewise. * valops.c: Likewise. * value.c: Likewise. * varobj.c: Likewise. * vax-nat.c: Likewise. * xml-syscall.c: Likewise. * xml-tdesc.c: Likewise. * xstormy16-tdep.c: Likewise. * xtensa-linux-nat.c: Likewise. * xtensa-tdep.c: Likewise. 2014-08-07 Gary Benson * common/common-defs.h: Include common-utils.h. * defs.h: Do not include common-utils.h. * common/gdb_assert.h: Likewise. * darwin-nat.h: Likewise. * nat/linux-btrace.c: Likewise. * target/waitstatus.h: Likewise. 2014-08-07 Gary Benson * common/common-defs.h: Include ptid.h. * defs.h: Do not include ptid.h. * inferior.h: Likewise. * infrun.h: Likewise. * nat/linux-btrace.h: Likewise. * nat/linux-osdata.h: Likewise. * target/waitstatus.h: Likewise. 2014-08-07 Gary Benson * common/common-defs.h: Include gdb_locale.h. * defs.h: Do not include gdb_locale.h. 2014-08-07 Gary Benson * common/common-defs.h: Include gdb/signals.h. * defs.h: Do not include gdb/signals.h. 2014-08-07 Gary Benson * common/common-defs.h: Include pathmax.h. * defs.h: Do not include pathmax.h. 2014-08-07 Gary Benson * common/common-defs.h: Include libiberty.h. * defs.h: Do not include libiberty.h. * common/queue.h: Likewise. * cp-name-parser.y: Likewise. * mi/mi-cmd-catch.c: Likewise. * python/python.c: Likewise. 2014-08-07 Gary Benson * common/common-defs.h: Include ansidecl.h. * defs.h: Do not include ansidecl.h. * common/buffer.h: Likewise. * common/common-utils.h: Likewise. 2014-08-07 Gary Benson * common/common-defs.h: Include stddef.h. * defs.h: Do not include stddef.h. * common/common-utils.h: Likewise. * amd64fbsd-nat.c: Likewise. * bcache.c: Likewise. * charset.c: Likewise. * common/buffer.h: Likewise. * common/vec.h: Likewise. * i386bsd-nat.c: Likewise. * nat/linux-btrace.h: Likewise. * ppcfbsd-nat.c: Likewise. * ppcnbsd-tdep.h: Likewise. * ppcobsd-nat.c: Likewise. * ppcobsd-tdep.h: Likewise. * python/py-gdb-readline.c: Likewise. 2014-08-07 Gary Benson * common/common-defs.h: Include stdarg.h. * defs.h: Do not include stdarg.h. * ada-lang.c: Likewise. * common/common-utils.h: Likewise. * guile/scm-string.c: Likewise. * guile/scm-utils.c: Likewise. * m32c-tdep.c: Likewise. 2014-08-07 Gary Benson * common/common-defs.h: Include stdlib.h. * defs.h: Do not include stdlib.h. * addrmap.c: Likewise. * bcache.c: Likewise. * common/buffer.c: Likewise. * common/common-utils.c: Likewise. * cp-name-parser.y: Likewise. * go32-nat.c: Likewise. * mn10300-linux-tdep.c: Likewise. * nat/linux-osdata.c: Likewise. * tui/tui.c: Likewise. * windows-nat.c: Likewise. 2014-08-07 Gary Benson * common/common-defs.h: Include stdio.h. * defs.h: Do not include stdio.h. * ada-lang.c: Likewise. * common/buffer.c: Likewise. * common/common-utils.c: Likewise. * cp-name-parser.y: Likewise. * gnu-nat.c: Likewise. * go32-nat.c: Likewise. * i386gnu-nat.c: Likewise. * proc-api.c: Likewise. * proc-events.c: Likewise. * proc-flags.c: Likewise. * proc-why.c: Likewise. * python/python-internal.h: Likewise. * target-memory.c: Likewise. * tui/tui-io.c: Likewise. * tui/tui.c: Likewise. 2014-08-06 Simon Marchi * solib-svr4.c (scan_dyntag): Rename dyntag and dyn_tag variables. (scan_dyntag_auxv): Same. 2014-08-06 Yao Qi * amd64-linux-nat.c: Remove duplicated include "x86-linux-nat.h". * i386-linux-nat.c: Likewise. 2014-08-06 Yao Qi * dwarf2read.c (dwarf_decode_lines_1): Replace "Special operand" with "Special opcode" in comments. 2014-08-05 Gary Benson * interps.c (initialize_interps): Remove prototype. (interpreter_initialized): Remove static global. (interp_add): Do not call initialize_interps. (initialize_interps): Remove function. 2014-08-05 Gary Benson * utils.c (vwarning): Remove spurious va_end. 2014-08-05 Alan Modra * charset.c (convert_between_encodings): Cast result of obstack_base. * cp-valprint.c (cp_print_value_fields): Use size_t locals. * hppa-tdep.c (internalize_unwinds): Change "size" parm to size_t. (read_unwind_info): Use size_t for some locals. * jit.c (finalize_symtab): Likewise. * utils.c (hashtab_obstack_allocate): Likewise. * symmisc.c (print_objfile_statistics): Update format strings. 2014-08-04 Jan Kratochvil * NEWS (Changes in GDB-4.0): Move Intel MPX and Intel AVX-512 items ... (Changes in GDB 7.8): ... here. 2014-08-04 Tom Tromey * target.c (set_targetdebug): New function. (initialize_targets): Pass set_targetdebug when creating "set debug target". 2014-08-01 Joel Brobecker * gdbtypes.c (resolve_dynamic_struct): Do not generate an error if detecting a variable-sized field that is not the last field. Fix struct type length computation. 2014-08-01 Joel Brobecker * amd64-windows-tdep.c (amd64_windows_frame_decode_insns): Add debug trace. 2014-08-01 Joel Brobecker * amd64-windows-tdep.c (amd64_windows_frame_decode_insns): Remove "+ 8" offset in computation of CHAIN_VMA. 2014-07-31 Doug Evans * inflow.c (child_terminal_inferior): Add comment. (child_terminal_ours_for_output): Add comment. (child_terminal_ours): Add comment. * linux-nat.c (linux_nat_terminal_inferior): Add comment. (linux_nat_terminal_ours): Add comment. 2014-07-31 Gary Benson * common/btrace-common.h: Do not include defs.h or server.h. * nat/mips-linux-watch.h: Likewise. * gdb-dlfcn.h: Do not include defs.h. * tracefile.h: Likewise. 2014-07-30 Roland McGrath * remote-sim.c (gdbsim_open): Apply constification to forward decl. 2014-07-30 Tom Tromey * bsd-kvm.c (bsd_kvm_open): Constify. * corelow.c (core_open): Constify. * ctf.c (ctf_open): Constify. * dbug-rom.c (dbug_open): Constify. * exec.c (exec_open): Constify. * m32r-rom.c (m32r_open, mon2000_open): Constify. * microblaze-rom.c (picobug_open): Constify. * nto-procfs.c (procfs_open_1, procfs_open, procfs_native_open): Constify. * ppcbug-rom.c (ppcbug_open0, ppcbug_open1): Constify. * record-btrace.c (record_btrace_open): Constify. * record-full.c (record_full_core_open_1, record_full_open_1) (record_full_open): Constify. * remote-m32r-sdi.c (m32r_open): Constify. * remote-mips.c (common_open, mips_open, pmon_open, ddb_open) (rockhopper_open, lsi_open): Constify. * remote-sim.c (gdbsim_open): Constify. * remote.c (remote_open, extended_remote_open, remote_open_1): Constify. * target.h (struct target_ops) : Make "arg" const. * tracefile-tfile.c (tfile_open): Constify. 2014-07-30 Tom Tromey * breakpoint.c (map_breakpoint_numbers): Update. * cli/cli-utils.c (get_number_trailer): Make "pp" const. Update. (get_number_const): New function. (get_number): Rewrite using get_number_const. (init_number_or_range): Make "string" const. (number_is_in_list): Make "list" const. * cli/cli-utils.h (get_number_const): Declare. (struct get_number_or_range_state) : Now const. (init_number_or_range, number_is_in_list): Update. * printcmd.c (map_display_numbers): Update. * value.c (value_from_history_ref): Constify. * value.h (value_from_history_ref): Update. 2014-07-30 Tom Tromey * corefile.c (hook_type, call_extra_exec_file_hooks) (specify_exec_file_hook): Constify. * exec.c (exec_file_attach): Make "filename" const. * gdbcore.h (deprecated_exec_file_display_hook) (specify_exec_file_hook, exec_file_attach): Constify. * main.c (captured_main): Use catch_command_errors_const. 2014-07-30 Tom Tromey * target.c (open_target): New function. (add_target_with_completer, add_deprecated_target_alias): Use set_cmd_sfunc, set_cmd_context. (debug_to_open): Remove. (setup_target_debug): Update. 2014-07-30 Yao Qi * parser-defs.h (struct exp_descriptor) : Update comments. * parse.c (exp_iterate): Update comments. 2014-07-30 Gary Benson * common/common-defs.h: New file. * Makefile.in (HFILES_NO_SRCDIR): Add common/common-defs.h. * defs.h: Include common-defs.h. Do not include config.h or build-gnulib/config.h. 2014-07-30 Gary Benson * common/common-utils.h: Do not include config.h. * nat/linux-btrace.h: Likewise. 2014-07-30 Gary Benson * btrace.c: Include defs.h. * common/ptid.c: Include defs.h or server.h as appropriate. * nat/mips-linux-watch.c: Likewise. 2014-07-29 Tom Tromey * target.c (target_is_pushed): Simplify. 2014-07-29 Joel Brobecker GDB 7.8 released. 2014-07-29 Yao Qi PR gdb/17206 * infcmd.c (until_next_command): Set step_range_end to PC + 1. 2014-07-28 Doug Evans PR guile/17203 * guile/scm-param.c (pascm_parameter_defined_p): New function. (gdbscm_register_parameter_x): Call it. Raise error for pre-existing parameters. 2014-07-28 Will Newton * arm-linux-tdep.c (THUMB2_SET_R7_SIGRETURN1): New define. (THUMB2_SET_R7_SIGRETURN2): Likewise. (THUMB2_SET_R7_RT_SIGRETURN1): Likewise. (THUMB2_SET_R7_RT_SIGRETURN2): Likewise. (THUMB2_EABI_SYSCALL): Likewise. (thumb2_eabi_linux_sigreturn_tramp_frame): Create new struct tramp_frame. (thumb2_eabi_linux_rt_sigreturn_tramp_frame): Likewise. (arm_linux_init_abi): Add Thumb2 tramp frame unwinders. 2014-07-27 Doug Evans * guile/scm-param.c (pascm_print_param_smob): Fix output. 2014-07-27 Doug Evans * guile/guile.c (gdbscm_execute_gdb_command): Fix typo in comment. 2014-07-26 Ludovic Courtès Doug Evans PR guile/17146 * acinclude.m4 (GDB_GUILE_PROGRAM_NAMES): New macro. (GDB_GUILD_TARGET_FLAG, GDB_TRY_GUILD): New macros. * configure.ac: Try to use guild to compile an scm file, if it fails then disable guile support. * configure: Regenerate. * data-directory/Makefile.in (GUILE_SOURCE_FILES): Renamed from GUILE_FILE_LIST. (GUILE_COMPILED_FILES): New variable. (GUILE_FILES) Update. (GUILD, GUILD_TARGET_FLAG, GUILD_COMPILE_FLAGS): New variables. (stamp-guile): Compile scm files. * guile/guile.c (boot_guile_support): New function. (standard_throw_args_p): New function. (print_standard_throw_error, print_throw_error): New functions. (handle_boot_error): New function. (initialize_scheme_side): Rewrite to call boot_guile_support. * guile/lib/gdb/boot.scm: Update %load-compiled-path. Load gdb.go. * guile/lib/gdb/init.scm (%silence-compiler-warnings%): New function. 2014-07-26 Ludovic Courtès Doug Evans PR guile/17146 * data-directory/Makefile.in (GUILE_FILES): Add support.scm. * guile/lib/gdb/support.scm: New file. * guile/guile.c (gdbscm_init_module_name): Change to "gdb". * guile/lib/gdb.scm: Load gdb/init.scm as an include file. All uses updated. * guile/lib/gdb/init.scm (SCM_ARG1, SCM_ARG2): Moved to support.scm. All uses updated. (%assert-type): Ditto, and renamed to assert-type. (%exception-print-style): Delete. 2014-07-26 Doug Evans PR build/17105 * configure.ac: Add AM_CONDITIONALs for HAVE_PYTHON, HAVE_GUILE. * configure: Regenerate. * data-directory/Makefile.in (PYTHON_FILE_LIST): Renamed from PYTHON_FILES. (PYTHON_FILES): New variable. (GUILE_FILE_LIST): Renamed from GUILE_FILES. (GUILE_FILES): New variable. (stamp-python, install-python, uninstall-python): Handle empty file list. (stamp-guile, install-guile, uninstall-guile): Ditto. 2014-07-26 Doug Evans PR guile/17177 * guile/lib/gdb.scm (pretty-printers): Export. (set-pretty-printers!): Export. * guile/lib/gdb/printing.scm (gdb module): Update. (prepend-pretty-printer!, append-pretty-printer!): Update. * guile/scm-pretty-print.c (pretty_printer_list_name): Delete. (pretty_printer_list_var): Delete. (pretty_printer_list): New static global. (gdbscm_pretty_printers): New function. (gdbscm_set_pretty_printers_x): New function. (ppscm_find_pretty_printer_from_gdb): Update. (pretty_printer_functions): Add pretty-printers, set-pretty-printers!. (gdbscm_initialize_pretty_printers): Update. 2014-07-26 Doug Evans PR 17185 * configure.ac: Add check for header gc/gc.h. Add check for function setenv. * configure: Regenerate. * config.in: Regenerate. * guile/guile.c (_initialize_guile): Add workaround for libgc 7.4.0. 2014-07-25 Maciej W. Rozycki * mips-tdep.c (mips_gdbarch_init): Also check the compressed ISA variation in gdbarch matching. 2014-07-25 Tom Tromey * exec.c (using_exec_ops): Remove. (exec_close_1): Update. Remove extraneous block, reindent. (add_target_sections): Use target_is_pushed. 2014-07-25 Pedro Alves * go32-nat.c (go32_create_inferior): Pass 0 to clear_proceed_status. * monitor.c (monitor_create_inferior): Likewise. * remote-m32r-sdi.c (m32r_create_inferior): Likewise. * remote-sim.c (gdbsim_create_inferior): Likewise. * solib-irix.c (irix_solib_create_inferior_hook): Likewise. * solib-osf.c (osf_solib_create_inferior_hook): Likewise. * windows-nat.c (do_initial_windows_stuff): Likewise. 2014-07-25 Pedro Alves * NEWS: Mention signal passing and "signal" command changes. * gdbthread.h (struct thread_suspend_state) : Extend comment. * breakpoint.c (until_break_command): Adjust clear_proceed_status call. * infcall.c (run_inferior_call): Adjust clear_proceed_status call. * infcmd.c (proceed_thread_callback, continue_1, step_once) (jump_command): Adjust clear_proceed_status call. (signal_command): Warn if other thread that are resumed have signals that will be delivered. Adjust clear_proceed_status call. (until_next_command, finish_command) (proceed_after_attach_callback, attach_command_post_wait) (attach_command): Adjust clear_proceed_status call. * infrun.c (proceed_after_vfork_done): Likewise. (proceed_after_attach_callback): Adjust comment. (clear_proceed_status_thread): Clear stop_signal if not in pass state. (clear_proceed_status_callback): Delete. (clear_proceed_status): New 'step' parameter. Only clear the proceed status of threads the command being prepared is about to resume. (proceed): If passed in an explicit signal, override stop_signal with it. Don't pass the last stop signal to the thread we're resuming. (init_wait_for_inferior): Adjust clear_proceed_status call. (switch_back_to_stepped_thread): Clear the signal if it should not be passed. * infrun.h (clear_proceed_status): New 'step' parameter. (user_visible_resume_ptid): Add comment. * linux-nat.c (linux_nat_resume_callback): Don't check whether the signal is in pass state. * remote.c (append_pending_thread_resumptions): Likewise. * mi/mi-main.c (proceed_thread): Adjust clear_proceed_status call. 2014-07-25 Tom Tromey * target.h (target_stopped_data_address) (target_watchpoint_addr_within_range): Use "->", not ".". Fix parentheses. 2014-07-25 Pierre Langlois * avr-tdep.c (avr_address_to_pointer): Clarify the conversion in the comments. (avr_pointer_to_address): Likewise. 2014-07-24 Tom Tromey * monitor.c (compile_pattern): Update. * target.h (struct target_ops) : Now const. 2014-07-24 Tom Tromey * cli/cli-decode.c (add_cmd, add_prefix_cmd) (add_abbrev_prefix_cmd, add_set_or_show_cmd, add_info) (add_info_alias, add_com): Make "doc" const. (print_doc_line): Make "str" const. (delete_cmd): Update. * cli/cli-decode.h (struct cmd_list_element) : Now const. (print_doc_line): Update. * cli/cli-script.c (document_command): Update. * command.h (add_cmd, add_prefix_cmd, add_abbrev_prefix_cmd) (add_com, add_info, add_info_alias): Update. * guile/scm-cmd.c (cmdscm_destroyer): Update. * python/py-cmd.c (cmdpy_destroyer): Update. 2014-07-24 Tom Tromey * cli/cli-decode.c (print_help_for_command): Make "prefix" const. (add_prefix_cmd, add_abbrev_prefix_cmd, apropos_cmd, help_list) (help_cmd_list): Constify. (lookup_cmd): Update. * cli/cli-decode.h (struct cmd_list_element) : Now const. (help_cmd_list, apropos_cmd): Update. * cli/cli-script.c (show_user): Update. * cli/cli-setshow.c (cmd_show_list): Make "prefix" const. * cli/cli-setshow.h (cmd_show_list): Update. * command.h (add_prefix_cmd, add_abbrev_prefix_cmd, help_list) (cmd_show_list): Update. * guile/scm-cmd.c (cmdscm_destroyer): Update. * python/py-cmd.c (cmdpy_destroyer): Update. 2014-07-24 Tom Tromey * cli/cli-decode.c (deprecate_cmd): Make "replacement" const. * cli/cli-decode.h (struct cmd_list_element) : Now const. * command.h (deprecate_cmd): Update. * maint.c (maintenance_do_deprecate): Add casts. 2014-07-24 Tom Tromey * cli/cli-decode.c (help_cmd): Make parameter "const". * cli/cli-decode.h (help_cmd): Update. 2014-07-24 Tom Tromey * stack.c (up_silently_base, down_silently_base): Make argument const. 2014-07-24 Tom Tromey * solib.c (solib_add): Make "pattern" const. * solib.h (solib_add): Update. 2014-07-24 Tom Tromey * remote.c (remote_serial_open, print_packet, putpkt) (putpkt_binary): Constify. * remote.h (putpkt): Update. 2014-07-24 Tom Tromey * monitor.c (monitor_open): Make "args" const. * monitor.h (monitor_open): Update. 2014-07-24 Tom Tromey * maint.c (match_bfd_flags): Make "string" const. (print_bfd_section_info): Remove casts. (print_objfile_section_info): Make "string" const. 2014-07-24 Tom Tromey * inf-child.c (inf_child_open_target): Make "arg" const. * inf-child.h (inf_child_open_target): Update. 2014-07-24 Tom Tromey * environ.c (unset_in_environ): Make "var" const. * environ.h (unset_in_environ): Update. 2014-07-24 Tom Tromey * cli/cli-dump.c (scan_expression_with_cleanup): Return const. Make "cmd" const. (scan_filename_with_cleanup): Likewise. (dump_memory_to_file, dump_value_to_file, restore_binary_file): Make arguments const. (restore_command): Update. 2014-07-24 Pedro Alves * tui/tui-io.c (tui_prep_terminal): Handle NULL rl_prompt. 2014-07-24 Tom Tromey Gary Benson * nat/linux-ptrace.c (additional_flags): New global. (linux_test_for_tracesysgood, linux_test_for_tracefork): Use additional_flags; don't check GDBSERVER. (linux_ptrace_set_additional_flags): New function. * nat/linux-ptrace.h (linux_ptrace_set_additional_flags): Declare. * linux-nat.c (_initialize_linux_nat): Call linux_ptrace_set_additional_flags. 2014-07-24 Tom Tromey * make-target-delegates (munge_type, write_debugmethod): New functions. (debug_names): New global. ($TARGET_DEBUG_PRINTER): New global. (write_function_header): Strip TARGET_DEBUG_PRINTER from the type name. Write debug methods. Generate init_debug_target. * target-debug.h: New file. * target-delegates.c: Rebuild. * target.c: Include target-debug.h. (debug_target): Hoist definition. (target_kill, target_get_section_table, target_memory_map) (target_flash_erase, target_flash_done, target_detach) (target_disconnect, target_wait, target_resume) (target_pass_signals, target_program_signals, target_follow_fork) (target_mourn_inferior, target_search_memory) (target_thread_address_space, target_close) (target_find_new_threads, target_core_of_thread) (target_verify_memory, target_insert_mask_watchpoint) (target_remove_mask_watchpoint): Remove targetdebug code. (debug_to_post_attach, debug_to_prepare_to_store) (debug_to_files_info, debug_to_insert_breakpoint) (debug_to_remove_breakpoint, debug_to_can_use_hw_breakpoint) (debug_to_region_ok_for_hw_watchpoint) (debug_to_can_accel_watchpoint_condition) (debug_to_stopped_by_watchpoint, debug_to_stopped_data_address) (debug_to_watchpoint_addr_within_range) (debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint) (debug_to_insert_watchpoint, debug_to_remove_watchpoint) (debug_to_terminal_init, debug_to_terminal_inferior) (debug_to_terminal_ours_for_output, debug_to_terminal_ours) (debug_to_terminal_save_ours, debug_to_terminal_info) (debug_to_load, debug_to_post_startup_inferior) (debug_to_insert_fork_catchpoint) (debug_to_remove_fork_catchpoint) (debug_to_insert_vfork_catchpoint) (debug_to_remove_vfork_catchpoint) (debug_to_insert_exec_catchpoint) (debug_to_remove_exec_catchpoint, debug_to_has_exited) (debug_to_can_run, debug_to_thread_architecture, debug_to_stop) (debug_to_rcmd, debug_to_pid_to_exec_file): Remove. (setup_target_debug): Call init_debug_target. * target.h (TARGET_DEBUG_PRINTER): New macro. (struct target_ops) : Use TARGET_DEBUG_PRINTER. 2014-07-24 Gary Benson * exceptions.h (throw_vfatal): Renamed to... (throw_vquit): New declaration. (throw_quit): Likewise. * exceptions.c (throw_vfatal): Renamed to... (throw_vquit): New function. (throw_quit): Likewise. (throw_error): Call throw_verror rather than throw_it. * utils.h (vfatal): Removed. (fatal): Likewise. * utils.c (vfatal): Removed. (fatal): Likewise. (internal_verror): Replaced call to fatal with call to throw_quit. (quit): Replaced calls to fatal with calls to throw_quit. 2014-07-23 Ajit Agarwal * microblaze-tdep.c (microblaze_fetch_instruction): Use of target_read_code. 2014-07-23 Chen Gang * microblaze-tdep.c (microblaze_dwarf2_reg_to_regnum): Check whether less than zero in conditional expression. 2014-07-23 Tom Tromey * make-target-delegates ($ARGS_PART): Match trailing close paren. ($INTRO_PART): Don't match whitespace. ($METHOD_TRAILER): Move earlier. Remove trailing semicolon and argument matching. ($METHOD): Add $METHOD_TRAILER. (trim): Rewrite. (scan_target_h): New sub. Change main loop not to collect state. * target-delegates.c: Rebuild. 2014-07-23 Gary Benson * cp-support.c (gdb_demangle): Fix build on systems without sigaltstack. 2014-07-22 Jan Kratochvil * dwarf2loc.c (value_of_dwarf_reg_entry): Remove setting value address for reference entry value target data value. 2014-07-22 Jan Kratochvil * stack.c (read_frame_arg): Verify value_optimized_out before calling value_available_contents_eq. 2014-07-22 Pedro Alves * value.c (allocate_optimized_out_value): Don't mark value as non-lazy. 2014-07-22 Jiong Wang * MAINTAINERS (Write After Approval): Update my email address. 2014-07-20 Doug Evans PR server/17147 * remote.c (putpkt_binary): Add text to error message. 2014-07-20 Yao Qi * eval.c: Remove "Chill" from comments. * gdbtypes.h: Likewise. * symtab.h: Likewise. 2014-07-20 Yao Qi * std-operator.def: Update comments to TERNOP_SLICE. 2014-07-20 Yao Qi * std-operator.def: Remove BINOP_RANGE. * breakpoint.c (watchpoint_exp_is_const): Update. * expprint.c (dump_subexp_body_standard): Likewise. * eval.c (init_array_element): Remove dead code. (evaluate_subexp_standard): Likewise. 2014-07-20 Yao Qi * std-operator.def: Remove BINOP_IN. * breakpoint.c (watchpoint_exp_is_const): Update. * eval.c (evaluate_subexp_standard): Likewise. * expprint.c (dump_subexp_body_standard): Likewise. 2014-07-19 Ajit Agarwal * microblaze-tdep.c (microblaze_register_names): Add the rshr and rslr register names. (microblaze_gdbarch_init): Use of tdesc_has_registers. Use of tdesc_find_feature. Use of tdesc_data_alloc. Use of tdesc_numbered_register. Use of microblaze_register_g_packet_guesses. Use of tdesc_use_registers. Use of set_gdbarch_register_type. (microblaze_register_g_packet_guesses): New. * microblaze-tdep.h (microblaze_reg_num): Add field MICROBLAZE_SLR_REGNUM MICROBLAZE_SHR_REGNUM MICROBLAZE_NUM_REGS and MICROBLAZE_NUM_CORE_REGS. (microblaze_frame_cache): Use of MICROBLAZE_NUM_REGS. * features/microblaze-core.xml: New file. * features/microblaze-stack-protect.xml: New file. * features/microblaze-with-stack-protect.c: New file. * features/microblaze-with-stack-protect.xml: New file. * features/microblaze.xml: New file. * features/microblaze.c: New file. * features/Makefile (microblaze-with-stack-protect): Add microblaze-with-stack-protect microblaze and microblaze-expedite. * regformats/microblaze-with-stack-protect.dat: New file. * regformats/microblaze.dat: New file. * doc/gdb.texinfo (MicroBlaze Features): Added. 2014-07-18 Tom Tromey * exec.c (exec_ops): Now static. * exec.h (exec_ops): Don't declare. 2014-07-18 Tom Tromey * spu-multiarch.c (spu_region_ok_for_hw_watchpoint): Pass "self" to find_target_beneath. * ravenscar-thread.c (ravenscar_prepare_to_store): Pass "ops" to find_target_beneath. (ravenscar_mourn_inferior): Pass "self" to find_target_beneath. 2014-07-18 Tom Tromey PR gdb/17130: * utils.c (quit): Use target_supports_terminal_ours. * target.h (target_supports_terminal_ours): Declare. * target.c (target_supports_delete_record): Don't check to_delete_record against NULL. (target_supports_terminal_ours): New function. 2014-07-18 Tom Tromey PR gdb/17130: * spu-multiarch.c (spu_region_ok_for_hw_watchpoint) (spu_fetch_registers, spu_store_registers, spu_xfer_partial) (spu_search_memory, spu_mourn_inferior): Simplify delegation. * linux-thread-db.c (thread_db_pid_to_str): Always delegate. * windows-nat.c (windows_xfer_partial): Always delegate. * record-btrace.c (record_btrace_xfer_partial): Simplify delegation. (record_btrace_fetch_registers, record_btrace_store_registers) (record_btrace_prepare_to_store, record_btrace_resume) (record_btrace_wait, record_btrace_find_new_threads) (record_btrace_thread_alive): Likewise. * procfs.c (procfs_xfer_partial): Always delegate. * corelow.c (core_xfer_partial): Always delegate. * sol-thread.c (sol_find_new_threads): Simplify delegation. 2014-07-18 Tom Tromey * exec.c (exec_make_note_section): Move earlier. 2014-07-17 Doug Evans PR gdb/17170 * maint.c (count_symtabs_and_blocks): Handle NULL current_program_space. (report_command_stats): Check global enabled flag in addition to recorded enabled flag. (make_command_stats_cleanup): Handle msg_type == 0, startup. 2014-07-16 Pedro Alves * linux-nat.c (kill_callback): Use kill_lwp, not kill. 2014-07-16 Tom Tromey * target.h (struct target_ops) : Reformat comment. 2014-07-16 Tom Tromey * target-delegates.c: Rebuild. 2014-07-15 Pierre Langlois * avr-tdep.c (AVR_TYPE_ADDRESS_CLASS_FLASH): New macro. (AVR_TYPE_INSTANCE_FLAG_ADDRESS_CLASS_FLASH): Likewise. (avr_address_to_pointer): Check for AVR_TYPE_ADDRESS_CLASS_FLASH. (avr_pointer_to_address): Likewise. (avr_address_class_type_flags): New function. (avr_address_class_type_flags_to_name): Likewise. (avr_address_class_name_to_type_flags): Likewise. (avr_gdbarch_init): Set address_class_type_flags, address_class_type_flags_to_name and address_class_name_to_type_flags. 2014-07-15 Pedro Alves * linux-nat.c (kill_callback): Save errno and work with saved copy. 2014-07-15 Simon Marchi * expprint.c (dump_subexp_body_standard): Handle OP_STRING. 2014-07-14 Edjunior Barbosa Machado * ppc-linux-nat.c (ppc_linux_can_use_hw_breakpoint): Report no hardware breakpoint support correctly. 2014-07-14 Pedro Alves * utils.c (prompt_for_continue): Call target_terminal_ours. 2014-07-14 Pedro Alves * inf-loop.c (inferior_event_handler): Use TRY_CATCH instead of catch_errors. Don't re-enable stdin or notify observers where, and rethrow error. (fetch_inferior_event_wrapper): Delete. 2014-07-14 Pedro Alves PR gdb/17072 * top.c: Include "inf-loop.h". (struct gdb_readline_wrapper_cleanup) : New field. (gdb_readline_wrapper_cleanup): Make the target async again, if it was async before. (gdb_readline_wrapper): Store whether the target is async, and make it sync. 2014-07-14 Pedro Alves PR gdb/17072 * top.c (gdb_readline_wrapper_line): Tweak comment. (gdb_readline_wrapper_cleanup): If readline is enabled, reinstall the input handler callback. 2014-07-14 Pedro Alves PR gdb/17072 * main.c: Include event-top.h. (handle_command_errors): New function. (catch_command_errors, catch_command_errors_const): Use it. 2014-07-14 Pedro Alves * exceptions.c (catch_command_errors, catch_command_errors_const): Moved to main.c. * exceptions.h (catch_command_errors_ftype) (catch_command_errors_const_ftype): Moved to main.c. (catch_command_errors, catch_command_errors_const): Delete declarations. * main.c (catch_command_errors_ftype) (catch_command_errors_const_ftype): Moved here from exceptions.h. (catch_command_errors, catch_command_errors_const)): Moved here from exceptions.c and make static. 2014-07-14 Pedro Alves * exceptions.c (print_any_exception): Delete. (catch_exceptions_with_msg): Use exception_print instead of print_any_exception. (catch_errors): Use exception_fprintf instead of print_any_exception. (catch_command_errors, catch_command_errors_const): Use exception_print instead of print_any_exception. 2014-07-14 Pedro Alves * infcall.c (run_inferior_call): Set 'sync_execution' while running the inferior call. 2014-07-14 Pedro Alves * value.c (value_contents_equal): Delete function. * value.h (value_contents_equal): Delete declaration. 2014-07-14 Tom Tromey PR exp/17106: * gdbtypes.c (is_dynamic_type_internal): New function, from is_dynamic_type. (is_dynamic_type): Rewrite. (resolve_dynamic_union): Use resolve_dynamic_type_internal. (resolve_dynamic_struct): Likewise. (resolve_dynamic_type_internal): New function, from resolve_dynamic_type. (resolve_dynamic_type): Rewrite. 2014-07-14 Tom Tromey * target.c (target_require_runnable): Also check record_stratum. Update comment. 2014-07-11 Yao Qi * arm-tdep.c (thumb_analyze_prologue): Break the loop if thumb_instruction_restores_sp return true. 2014-07-11 Yao Qi * arm-tdep.c (thumb_instruction_restores_sp): New function. (thumb_in_function_epilogue_p): Call thumb_instruction_restores_sp. 2014-07-11 Yao Qi * arm-tdep.c (thumb_analyze_prologue): Don't match instruction 'add sp, #imm'. (thumb_in_function_epilogue_p): Don't match 'sub sp, #imm'. 2014-07-11 Gary Benson * amd64-linux-nat.c (gdbcore.h): Remove include. (regset.h): Likewise. (nat/linux-btrace.h): Likewise. (btrace.h): Likewise. (gdb_assert.h): Likewise. (string.h): Likewise. (sys/uio.h): Likewise. (sys/debugreg.h): Likewise. (sys/syscall.h): Likewise. (sys/procfs.h): Likewise. (sys/user.h): Likewise. (asm/ptrace.h): Likewise. (i386-nat.h): Likewise. * i386-linux-nat.c (i386-nat.h): Likewise. (regset.h): Likewise. (target.h): Likewise. (linux-nat.h): Likewise. (nat/linux-btrace.h): Likewise. (btrace.h): Likewise. (gdb_assert.h): Likewise. (string.h): Likewise. (sys/uio.h): Likewise. (sys/user.h): Likewise. (sys/procfs.h): Likewise. (sys/reg.h): Likewise. (sys/debugreg.h): Likewise. (ORIG_EAX): Remove definition. 2014-07-11 Gary Benson * i386-linux-nat.h: New file. * x86-linux-nat.h: Likewise. * x86-linux-nat.c: Likewise. * Makefile.in (HFILES_NO_SRCDIR): Add the above new headers. * config/i386/linux.mh (NATDEPFILES): Add x86-linux-nat.o. * config/i386/linux64.mh (NATDEPFILES): Likewise. * amd64-linux-nat.c (x86-linux-nat.h): New include. (PTRACE_GETREGSET): Now in x86-linux-nat.h. (PTRACE_SETREGSET): Likewise. (arch_lwp_info): Now in x86-linux-nat.c. (have_ptrace_getregset): Now in x86-linux-nat.h. (x86_linux_dr_get): Now in x86-linux-nat.c. (x86_linux_dr_set): Likewise. (x86_linux_dr_get_addr): Likewise. (x86_linux_dr_get_control): Likewise. (x86_linux_dr_get_status): Likewise. (update_debug_registers_callback): Likewise. (x86_linux_dr_set_control): Likewise. (x86_linux_dr_set_addr): Likewise. (x86_linux_prepare_to_resume): Likewise. (x86_linux_new_thread): Likewise. (x86_linux_new_fork): Likewise. (x86_linux_get_thread_area): Likewise. (super_post_startup_inferior): Likewise. (x86_linux_child_post_startup_inferior): Likewise. (AMD64_LINUX_USER64_CS): Likewise. (AMD64_LINUX_X32_DS): Likewise. (x86_linux_read_description): Likewise. (x86_linux_enable_btrace): Likewise. (x86_linux_disable_btrace): Likewise. (x86_linux_teardown_btrace): Likewise. (x86_linux_read_btrace): Likewise. (x86_linux_create_target): Likewise. (x86_linux_add_target): Likewise. * i386-linux-nat.c (x86-linux-nat.h): New include. (PTRACE_GETREGSET): Now in x86-linux-nat.h. (PTRACE_SETREGSET): Likewise. (arch_lwp_info): Now in x86-linux-nat.c. (have_ptrace_getregset): Now in x86-linux-nat.h. (x86_linux_dr_get): Now in x86-linux-nat.c. (x86_linux_dr_set): Likewise. (x86_linux_dr_get_addr): Likewise. (x86_linux_dr_get_control): Likewise. (x86_linux_dr_get_status): Likewise. (update_debug_registers_callback): Likewise. (x86_linux_dr_set_control): Likewise. (x86_linux_dr_set_addr): Likewise. (x86_linux_prepare_to_resume): Likewise. (x86_linux_new_thread): Likewise. (x86_linux_new_fork): Likewise. (x86_linux_get_thread_area): Likewise. (super_post_startup_inferior): Likewise. (x86_linux_child_post_startup_inferior): Likewise. (AMD64_LINUX_USER64_CS): Likewise. (AMD64_LINUX_X32_DS): Likewise. (x86_linux_read_description): Likewise. (x86_linux_enable_btrace): Likewise. (x86_linux_disable_btrace): Likewise. (x86_linux_teardown_btrace): Likewise. (x86_linux_read_btrace): Likewise. (x86_linux_create_target): Likewise. (x86_linux_add_target): Likewise. 2014-07-11 Gary Benson * amd64-linux-nat.c: Comment and whitespace changes. * i386-linux-nat.c: Comment and whitespace changes. 2014-07-11 Gary Benson * amd64-linux-nat.c (x86_linux_create_target): New function. (x86_linux_add_target): Likewise. (_initialize_amd64_linux_nat): Delegate to the above new functions. * i386-linux-nat.c (x86_linux_create_target): New function. (x86_linux_add_target): Likewise. (_initialize_i386_linux_nat): Delegate to the above new functions. 2014-07-11 Gary Benson * amd64-linux-nat.c (x86_linux_get_thread_area): New function. (ps_get_thread_area): Delegate to the above in 32-bit mode. * i386-linux-nat.c (x86_linux_get_thread_area): New function. (ps_get_thread_area): Delegate to the above. 2014-07-11 Gary Benson * amd64-linux-nat.c (amd64_linux_read_description): Renamed to x86_linux_read_description. All uses updated. amd64-specific code conditionalized. Conditionalized i386-specific code added. Redundant cast removed. * i386-linux-nat.c (i386_linux_read_description): Renamed to x86_linux_read_description. All uses updated. i386-specific code conditionalized. Conditionalized amd64-specific code added. One sizeof replaced with the actual type it is describing. 2014-07-11 Gary Benson * amd64-linux-nat.c (amd64_linux_dr_get): Renamed to x86_linux_dr_get. All uses updated. (amd64_linux_dr_set): Renamed to x86_linux_dr_set. All uses updated. (amd64_linux_dr_get_addr): Renamed to x86_linux_dr_get_addr. All uses updated. (amd64_linux_dr_get_control): Renamed to x86_linux_dr_get_control. All uses updated. (amd64_linux_dr_get_status): Renamed to x86_linux_dr_get_status. All uses updated. (amd64_linux_dr_set_control): Renamed to x86_linux_dr_set_control. All uses updated. (amd64_linux_dr_set_addr): Renamed to x86_linux_dr_set_addr. All uses updated. (amd64_linux_prepare_to_resume): Renamed to x86_linux_prepare_to_resume. All uses updated. (amd64_linux_new_thread): Renamed to x86_linux_new_thread. All uses updated. (amd64_linux_new_fork): Renamed to x86_linux_new_fork. All uses updated. (amd64_linux_child_post_startup_inferior): Renamed to x86_linux_child_post_startup_inferior. All uses updated. (amd64_linux_enable_btrace): Renamed to x86_linux_enable_btrace. All uses updated. (amd64_linux_disable_btrace): Renamed to x86_linux_disable_btrace. All uses updated. (amd64_linux_teardown_btrace): Renamed to x86_linux_teardown_btrace. All uses updated. (amd64_linux_read_btrace): Renamed to x86_linux_read_btrace. All uses updated. * i386-linux-nat.c (i386_linux_dr_get): Renamed to x86_linux_dr_get. All uses updated. (i386_linux_dr_set): Renamed to x86_linux_dr_set. All uses updated. (i386_linux_dr_get_addr): Renamed to x86_linux_dr_get_addr. All uses updated. (i386_linux_dr_get_control): Renamed to x86_linux_dr_get_control. All uses updated. (i386_linux_dr_get_status): Renamed to x86_linux_dr_get_status. All uses updated. (i386_linux_dr_set_control): Renamed to x86_linux_dr_set_control. All uses updated. (i386_linux_dr_set_addr): Renamed to x86_linux_dr_set_addr. All uses updated. (i386_linux_prepare_to_resume): Renamed to x86_linux_prepare_to_resume. All uses updated. (i386_linux_new_thread): Renamed to x86_linux_new_thread. All uses updated. (i386_linux_new_fork): Renamed to x86_linux_new_fork. All uses updated. (i386_linux_child_post_startup_inferior): Renamed to x86_linux_child_post_startup_inferior. All uses updated. (i386_linux_enable_btrace): Renamed to x86_linux_enable_btrace. All uses updated. (i386_linux_disable_btrace): Renamed to x86_linux_disable_btrace. All uses updated. (i386_linux_teardown_btrace): Renamed to x86_linux_teardown_btrace. All uses updated. (i386_linux_read_btrace): Renamed to x86_linux_read_btrace. All uses updated. 2014-07-11 Adrian Sendroiu * remote.c (extended_remote_post_attach): New function. (init_extended_remote_ops): Install it as to_post_attach method. 2014-07-09 Pedro Alves * infcmd.c (attach_command_post_wait): Don't call target_terminal_inferior here. (attach_command): Call it here instead. 2014-07-09 Andrew Burgess * ada-varobj.c (ada_varobj_ops): Fill in is_path_expr_parent field. * c-varobj.c (c_is_path_expr_parent): New function, moved core from varobj.c, with additional checks. (c_varobj_ops): Fill in is_path_expr_parent field. (cplus_varobj_ops): Fill in is_path_expr_parent field. * jv-varobj.c (java_varobj_ops): Fill in is_path_expr_parent field. * varobj.c (is_path_expr_parent): Call is_path_expr_parent varobj ops method. (varobj_default_is_path_expr_parent): New function. * varobj.h (lang_varobj_ops): Add is_path_expr_parent field. (varobj_default_is_path_expr_parent): Declare new function. 2014-07-08 Markus Metzger * infcmd.c (finish_backward): Turn internal error into normal error. 2014-07-07 Pedro Alves PR gdb/17096 * remote.c (async_handle_remote_sigint) (async_handle_remote_sigint_twice): Call gdb_call_async_signal_handler instead of mark_async_signal_handler. 2014-07-07 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_info_record): Remove. * record.c (info_record_command): Unconditionally call to_info_record. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. (target_info_record): Remove. 2014-07-07 Tom Tromey * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. * target.c (generic_tls_error): New function. (target_translate_tls_address): Don't search target stack. * target-delegates.c: Rebuild. * ppc-linux-tdep.c (ppc_linux_spe_context): Don't search target stack. * linux-thread-db.c (thread_db_get_thread_local_address): Unconditionally call beneath target. 2014-07-03 Marc Khouzam * cli/cli-logging.c (pop_output_files): Assign targerr to gdb_stdtargerr. 2014-07-03 Andrew Burgess * MAINTAINERS (Write After Approval): Update my email address. 2014-07-02 Gary Benson * proc-service.c (ps_xfer_memory): Update comment. (ps_pstop): Remove unused function. (ps_pcontinue): Likewise. (ps_lstop): Likewise. (ps_lcontinue): Likewise. (ps_lgetxregsize): Likewise. (ps_lgetxregs): Likewise. (ps_lsetxregs): Likewise. (ps_plog): Likewise. (ps_ptread): Likewise. (ps_ptwrite): Likewise. 2014-07-01 Mark Wielaard * dwarf2read.c (add_array_cv_type): New function. (read_tag_const_type): Call add_array_cv_type for TYPE_CODE_ARRAY. (read_tag_volatile_type): Likewise. 2014-07-01 Tom Tromey * breakpoint.c (add_catch_command): Use cmd_sfunc_ftype. * breakpoint.h (add_catch_command): Use cmd_sfunc_ftype. * cli/cli-decode.c (cmd_cfunc_eq, add_cmd, add_prefix_cmd) (add_abbrev_prefix_cmd, add_info, add_com): Use cmd_cfunc_ftype. * command.h (cmd_cfunc_ftype): Move earlier. (add_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, cmd_cfunc_eq) (add_com, add_info): Use cmd_cfunc_ftype. 2014-06-30 Tom Tromey * symtab.c (operator_chars): Make parameters and return type const. (file_matches): Make "files" const. (struct search_symbols_data) : Now const. (search_symbols): Make "regexp" and "files" parameters const. Update. (symtab_symbol_info): Remove cast. (rbreak_command): Update. * symtab.h (search_symbols): Update. 2014-06-27 Yao Qi * breakpoint.c (check_longjmp_breakpoint_for_call_dummy): Change parameter type to 'struct thread_info *'. Caller updated. * breakpoint.h (check_longjmp_breakpoint_for_call_dummy): Update declaration. * dummy-frame.c (struct dummy_frame_id): New. (dummy_frame_id_eq): New function. (struct dummy_frame) : Change its type to 'struct dummy_frame_id'. (dummy_frame_push): Add parameter ptid and save it in dummy_frame_id. (pop_dummy_frame_bpt): Use ptid of dummy_frame instead of inferior_ptid. (pop_dummy_frame): Assert that the ptid of dummy_frame equals to inferior_ptid. (lookup_dummy_frame): Change parameter type to 'struct dummy_frame_id *'. Callers updated. Call dummy_frame_id_eq instead of frame_id_eq. (dummy_frame_pop): Add parameter ptid. Callers updated. Update comments. Compose dummy_frame_id and pass it to lookup_dummy_frame. (dummy_frame_discard): Add parameter ptid. (dummy_frame_sniffer): Compose dummy_frame_id and call dummy_frame_id_eq instead of frame_id_eq. (fprint_dummy_frames): Print ptid. * dummy-frame.h: Remove comments. (dummy_frame_push): Add ptid in declaration. (dummy_frame_pop, dummy_frame_discard): Likewise. 2014-06-26 Tom Tromey * cli/cli-cmds.c (error_no_arg): Make "why" const. * command.h (error_no_arg): Update. 2014-06-26 Tom Tromey * cli/cli-setshow.c (do_set_command): Make "arg" const. (do_show_command): Make "arg" const. * cli/cli-setshow.h (do_set_command, do_show_command): Update. 2014-06-26 Tom Tromey * record-full.c (record_full_get_bookmark): Make "args" const. (record_full_goto_bookmark): Make "raw_bookmark" const. * record.c (record_goto): New function. (cmd_record_goto): Use it. Now static. * record.h (record_goto): Declare. (cmd_record_goto): Remove declaration. * target-delegates.c: Rebuild. * target.h (struct target_ops) : Make parameter const. 2014-06-26 Tom Tromey * defs.h (generic_load): Update. * m32r-rom.c (m32r_load_gen): Make "filename" const. * monitor.c (monitor_load): Make "args" const. * remote-m32r-sdi.c (m32r_load): Make "args" const. * remote-mips.c (mips_load_srec, pmon_load_fast): Make "args" const. (mips_load): Make "file" const. * remote-sim.c (gdbsim_load): Make "args" const. * remote.c (remote_load): Make "name" const. * symfile.c (generic_load): Make "args" const. * target-delegates.c: Rebuild. * target.c (target_load): Make "arg" const. (debug_to_load): Make "args" const. * target.h (struct target_ops) : Make parameter const. (target_load): Update. 2014-06-26 Tom Tromey PR symtab/16902: * dwarf2read.c (fixup_go_packaging, dwarf2_compute_name) (dwarf2_physname, read_partial_die) (guess_partial_die_structure_name, fixup_partial_die) (guess_full_die_structure_name, anonymous_struct_prefix) (dwarf2_name): Use per-BFD obstack. 2014-06-26 Yao Qi * dummy-frame.c (dummy_frame_sniffer): Move local variables dummyframe and this_id into inner block below. 2014-06-26 Yao Qi * infrun.c (_initialize_infrun): Replace "signal_program[0]" with "signal_pass[0]" in the initialization of signal_pass. 2014-06-25 Markus Metzger * record-btrace.c (record_btrace_generating_corefile) (record_btrace_prepare_to_generate_core) (record_btrace_done_generating_core): New. (record_btrace_xfer_partial, record_btrace_fetch_registers) (record_btrace_store_registers, record_btrace_prepare_to_store): Forward request when generating a core file. (record_btrace_open): Set record_btrace_generating_corefile to zero. (init_record_btrace_ops): Set to_prepare_to_generate_core and to_done_generating_core. 2014-06-25 Markus Metzger * target.h (target_ops) : New. (target_prepare_to_generate_core, target_done_generating_core): New. * target.c (target_prepare_to_generate_core) (target_done_generating_core): New. * target-delegates.c: Regenerate. * gcore.c: (write_gcore_file): Rename to ... (write_gcore_file_1): ...this. (write_gcore_file): Call target_prepare_to_generate_core and target_done_generating_core. 2014-06-25 Markus Metzger * fbsd-nat.c (fbsd_make_corefile_notes): Remove make_cleanup call. * gcore.c (write_gcore_file): Free memory returned from make_corefile_notes. * linux-tdep.c (linux_make_corefile_notes): Remove make_cleanup call. * procfs.c (procfs_make_note_section): Remove make_cleanup call. 2014-06-24 Yao Qi * arm-linux-tdep.c (arm_linux_skip_trampoline_code): New. (arm_linux_init_abi): Set skip_trampoline_code with gdbarch_skip_trampoline_code instead of find_solib_trampoline_target. 2014-06-24 Yao Qi * arm-tdep.c (arm_stub_unwind_sniffer): Return 1 if arm_skip_bx_reg returns non-zero. 2014-06-24 Yao Qi * arm-tdep.c (arm_skip_bx_reg): New function. (arm_skip_stub): Call arm_skip_bx_reg. 2014-06-23 Don Breazeal * MAINTAINERS: Add myself as write-after-approval maintainer. 2014-06-23 Pedro Alves * amd64-linux-nat.c (amd64_linux_prepare_to_resume): Clear DR_CONTROL before setting DR0..DR3. * i386-linux-nat.c (i386_linux_prepare_to_resume): Likewise. * nat/i386-dregs.c (i386_remove_aligned_watchpoint): Clear all bits of DR_CONTROL related to the debug register slot being disabled. If all slots are vacant, clear local slowdown as well, and assert DR_CONTROL is 0. 2014-06-23 Siva Chandra Reddy * python/lib/gdb/command/xmethods.py (get_method_matchers_in_loci): Lookup xmethod matchers in the current progspace only if the string "progspace" matches LOCUS_RE. 2014-06-20 Jan Kratochvil Fix --with-system-readline with readline-6.3 patch 5. * tui/tui-io.c (tui_old_rl_getc_function, tui_old_rl_redisplay_function) (tui_old_rl_prep_terminal, tui_old_rl_deprep_terminal): Use rl_*_t types. 2014-06-20 Tom Tromey * dwarf2read.c (dw2_get_real_path): Use correct type in OBSTACK_CALLOC. * gdb_obstack.h (OBSTACK_ZALLOC, OBSTACK_CALLOC): Cast result. 2014-06-20 Gary Benson * common/gdb_thread_db.h: Moved to nat. All includes updated. * common/glibc_thread_db.h: Likewise. * common/i386-cpuid.h: Likewise. * common/i386-gcc-cpuid.h: Likewise. * common/linux-btrace.h: Likewise. * common/linux-osdata.h: Likewise. * common/linux-procfs.h: Likewise. * common/linux-ptrace.h: Likewise. * common/mips-linux-watch.h: Likewise. * common/linux-btrace.c: Moved to nat. * common/linux-osdata.c: Likewise. * common/linux-procfs.c: Likewise. * common/linux-ptrace.c: Likewise. * common/mips-linux-watch.c: Likewise. * nat/gdb_thread_db.h: Moved from common. * nat/glibc_thread_db.h: Likewise. * nat/i386-cpuid.h: Likewise. * nat/i386-gcc-cpuid.h: Likewise. * nat/linux-btrace.c: Likewise. * nat/linux-btrace.h: Likewise. * nat/linux-osdata.c: Likewise. * nat/linux-osdata.h: Likewise. * nat/linux-procfs.c: Likewise. * nat/linux-procfs.h: Likewise. * nat/linux-ptrace.c: Likewise. * nat/linux-ptrace.h: Likewise. * nat/mips-linux-watch.c: Likewise. * nat/mips-linux-watch.h: Likewise. * Makefile.in (HFILES_NO_SRCDIR): Reflect new locations. (object file files): Reordered. * gdb/copyright.py (EXCLUDE_LIST): Reflect new location of glibc_thread_db.h. 2014-06-20 Gary Benson * i386-nat.h (debug_hw_points): Moved to nat/i386-dregs.c. (i386_dr_low_type): Moved to nat/i386-dregs.h. (i386_dr_low): Likewise. (i386_dr_low_can_set_addr): Moved to nat/i386-dregs.c. (i386_dr_low_set_addr): Likewise. (i386_dr_low_get_addr): Likewise. (i386_dr_low_can_set_control): Likewise. (i386_dr_low_set_control): Likewise. (i386_dr_low_get_control): Likewise. (i386_dr_low_get_status): Likewise. (i386_get_debug_register_length): Likewise. * nat/i386-dregs.h (i386_dr_low_type): Moved from i386-nat.h. (i386_dr_low): Likewise. * nat/i386-dregs.c (i386-low.h): Remove include. (i386-nat.h): Likewise. (nat/i386-dregs.h): New include. (i386_dr_low_can_set_addr): Moved from i386-nat.h. (i386_dr_low_set_addr): Likewise. (i386_dr_low_get_addr): Likewise. (i386_dr_low_can_set_control): Likewise. (i386_dr_low_set_control): Likewise. (i386_dr_low_get_control): Likewise. (i386_dr_low_get_status): Likewise. (i386_get_debug_register_length): Likewise. (debug_hw_points): Likewise. 2014-06-19 Iain Buclaw * Makefile.in (SFILES): Add d-exp.y. (YYFILES): Add d-exp.c. (YYOBJ): Add d-exp.o. (local-maintainer-clean): Delete d-exp.c. * d-exp.y: New file. * d-lang.h (d_parse): New declaration. (d_error): New declaration. * d-lang.c (d_op_print_tab): Add entry for BINOP_CONCAT and BINOP_EXP. Set BINOP_EQUAL and BINOP_NOTEQUAL to same precedence as other PREC_ORDER operators. (d_language_defn): Use d_parse, d_error instead of c_parse, c_error. 2014-06-19 Yao Qi * gdbthread.h (any_running): Remove the declaration. * thread.c (any_running): Remove. 2014-06-19 Yao Qi * gdbthread.h (struct thread_info) : Change its type to 'enum thread_state'. Update comments. 2014-06-19 Pedro Alves * gdbthread.h (ALL_THREADS): Delete. (ALL_NON_EXITED_THREADS): New macro. * btrace.c (btrace_free_objfile): Use ALL_NON_EXITED_THREADS instead of ALL_THREADS. * infrun.c (find_thread_needs_step_over) (switch_back_to_stepped_thread): Use ALL_NON_EXITED_THREADS instead of ALL_THREADS. * record-btrace.c (record_btrace_open) (record_btrace_stop_recording, record_btrace_close) (record_btrace_is_replaying, record_btrace_resume) (record_btrace_find_thread_to_move, record_btrace_wait): Likewise. * remote.c (append_pending_thread_resumptions): Likewise. * thread.c (thread_apply_all_command): Likewise. 2014-06-19 Gary Benson * i386-nat.c (i386_stopped_by_watchpoint): Use i386_dr_stopped_by_watchpoint. (i386_insert_hw_breakpoint): Use i386_dr_insert_watchpoint. (i386_remove_hw_breakpoint): Use i386_dr_remove_watchpoint. 2014-06-19 Gary Benson * nat/i386-dregs.c: New file. * Makefile.in (i386-dregs.o): New rule. * config/i386/cygwin.mh (NATDEPFILES): Add i386-dregs.o. * config/i386/cygwin64.mh (NATDEPFILES): Likewise. * config/i386/darwin.mh (NATDEPFILES): Likewise. * config/i386/fbsd.mh (NATDEPFILES): Likewise. * config/i386/fbsd64.mh (NATDEPFILES): Likewise. * config/i386/go32.mh (NATDEPFILES): Likewise. * config/i386/linux.mh (NATDEPFILES): Likewise. * config/i386/linux64.mh (NATDEPFILES): Likewise. * config/i386/mingw.mh (NATDEPFILES): Likewise. * config/i386/mingw64.mh (NATDEPFILES): Likewise. * i386-nat.h (debug_hw_points): New declaration. * i386-nat.c (breakpoint.h): Remove include. (command.h): Likewise. (target.h): Likewise. (gdb_assert.h): Likewise. (debug_hw_points): Made nonstatic. (debug_printf): Now in i386-dregs.c. (TARGET_HAS_DR_LEN_8): Likewise. (DR_CONTROL_SHIFT): Likewise. (DR_CONTROL_SIZE): Likewise. (DR_RW_EXECUTE): Likewise. (DR_RW_WRITE): Likewise. (DR_RW_READ): Likewise. (DR_RW_IORW): Likewise. (DR_LEN_1): Likewise. (DR_LEN_2): Likewise. (DR_LEN_4): Likewise. (DR_LEN_8): Likewise. (DR_LOCAL_ENABLE_SHIFT): Likewise. (DR_GLOBAL_ENABLE_SHIFT): Likewise. (DR_ENABLE_SIZE): Likewise. (DR_LOCAL_SLOWDOWN): Likewise. (DR_GLOBAL_SLOWDOWN): Likewise. (DR_CONTROL_RESERVED): Likewise. (I386_DR_CONTROL_MASK): Likewise. (I386_DR_VACANT): Likewise. (I386_DR_LOCAL_ENABLE): Likewise. (I386_DR_GLOBAL_ENABLE): Likewise. (I386_DR_DISABLE): Likewise. (I386_DR_SET_RW_LEN): Likewise. (I386_DR_GET_RW_LEN): Likewise. (I386_DR_WATCH_HIT): Likewise. (i386_wp_op_t): Likewise. (i386_show_dr): Likewise. (i386_length_and_rw_bits): Likewise. (i386_insert_aligned_watchpoint): Likewise. (i386_remove_aligned_watchpoint): Likewise. (i386_handle_nonaligned_watchpoint): Likewise. (i386_update_inferior_debug_regs): Likewise. (i386_insert_watchpoint): Use i386_dr_insert_watchpoint. (i386_remove_watchpoint): Use i386_dr_remove_watchpoint. (i386_region_ok_for_watchpoint): Use i386_dr_region_ok_for_watchpoint. (i386_stopped_data_address): Use i386_dr_stopped_data_address. 2014-06-19 Gary Benson * i386-nat.c (i386_insert_hw_breakpoint): Use i386_insert_watchpoint. (i386_remove_hw_breakpoint): Use i386_remove_watchpoint. 2014-06-19 Gary Benson * i386-nat.c (i386_dr_show): Renamed to i386_show_dr and made static. All uses updated. (i386_dr_length_and_rw_bits): Renamed to i386_length_and_rw_bits and made static. All uses updated. (i386_dr_insert_aligned_watchpoint): Renamed to i386_insert_aligned_watchpoint and made static. All uses updated. (i386_dr_remove_aligned_watchpoint): Renamed to i386_remove_aligned_watchpoint and made static. All uses updated. (i386_dr_update_inferior_debug_regs): Renamed to i386_update_inferior_debug_regs and made static. All uses updated. * nat/i386-dregs.h (i386_dr_show): Removed. (i386_dr_length_and_rw_bits): Likewise. (i386_dr_insert_aligned_watchpoint): Likewise. (i386_dr_remove_aligned_watchpoint): Likewise. (i386_dr_update_inferior_debug_regs): Likewise. 2014-06-19 Gary Benson * configure.ac [AC_CHECK_FUNCS] : New check. * configure: Regenerate. * config.in: Likewise. * main.c (signal.h): New include. (setup_alternate_signal_stack): New function. (captured_main): Call the above. * cp-support.c (signal.h): New include. (catch_demangler_crashes): New flag. (SIGJMP_BUF): New define. (SIGSETJMP): Likewise. (SIGLONGJMP): Likewise. (gdb_demangle_jmp_buf): New static global. (gdb_demangle_attempt_core_dump): Likewise. (gdb_demangle_signal_handler): New function. (gdb_demangle): If catch_demangler_crashes is set, install the above signal handler before calling bfd_demangle, and restore the original signal handler afterwards. Display the offending symbol and call demangler_warning the first time a segmentation fault is caught. (_initialize_cp_support): New maint set/show command. 2014-06-19 Gary Benson * utils.h (resource_limit_kind): New enum. (can_dump_core): New declaration. (warn_cant_dump_core): Likewise. (dump_core): Likewise. * utils.c (dump_core): Made nonstatic. Added new parameter "limit_kind". (can_dump_core): Made nonstatic. Moved printing code to... (warn_cant_dump_core): New function. (can_dump_core_warn): Likewise. (internal_vproblem): Replace calls to can_dump_core with calls to can_dump_core_warn. Supply new argument to each. 2014-06-19 Gary Benson * utils.h (demangler_vwarning): New declaration. (demangler_warning): Likewise. * utils.c (struct internal_problem) : New field. : Likewise (internal_error_problem): Add values for above new fields. (internal_warning_problem): Likewise. (demangler_warning_problem): New static global. (demangler_vwarning): New function. (demangler_warning): Likewise. (add_internal_problem_command): Selectively add commands. (_initialize_utils): New internal problem command. * maint.c (maintenance_demangler_warning): New function. (_initialize_maint_cmds): New command. 2014-06-18 Tom Tromey * f-valprint.c (info_common_command_for_block): Update. * symtab.h (struct general_symbol_info) : Now const. 2014-06-18 Tom Tromey * symtab.h (struct symtab) : Now const. * ada-lang.c (ada_add_global_exceptions): Update. * buildsym.c (augment_type_symtab): Update. * dwarf2read.c (dw2_lookup_symbol): Update. * jit.c (finalize_symtab): Update. * jv-lang.c (add_class_symtab_symbol): Update. * mdebugread.c (parse_symbol, add_block, sort_blocks, new_symtab): Update. * objfiles.c (objfile_relocate1): Update. * psymtab.c (lookup_symbol_aux_psymtabs) (maintenance_check_psymtabs): Update. * python/py-symtab.c (stpy_global_block, stpy_static_block): Update. * spu-tdep.c (spu_catch_start): Update. * symmisc.c (dump_symtab_1): Update. * symtab.c (lookup_global_symbol_from_objfile) (lookup_symbol_aux_objfile, lookup_symbol_aux_quick) (basic_lookup_transparent_type_quick) (basic_lookup_transparent_type, find_pc_sect_symtab) (find_pc_sect_line, search_symbols): Update. * block.c (find_block_in_blockvector): Make "bl" const. (blockvector_for_pc_sect, blockvector_for_pc): Make return type const. (blockvector_contains_pc): Make "bv" const. (block_for_pc_sect): Update. * block.h (blockvector_for_pc, blockvector_for_pc_sect) (blockvector_contains_pc): Update. * breakpoint.c (resolve_sal_pc): Update. * inline-frame.c (block_starting_point_at): Update. 2014-06-18 Tom Tromey * completer.c (complete_line): Make "line_buffer" const. * completer.h (complete_line): Update. 2014-06-18 Tom Tromey * symtab.c (add_macro_name): Remove unneeded cast. 2014-06-18 Tom Tromey * cli/cli-setshow.h (parse_cli_boolean_value): Update. * cli/cli-setshow.c (parse_cli_boolean_value): Make "arg" const. 2014-06-18 Tom Tromey * probe.c (info_probes_for_ops): Make "arg" const. * probe.h (info_probes_for_ops): Update. 2014-06-18 Tom Tromey * varobj.c (varobj_create): Update. * valops.c (value_of_this): Update. * tracepoint.c (add_local_symbols, scope_info): Update. * symtab.h (struct general_symbol_info) : Now const. * symtab.c (skip_prologue_sal) (default_make_symbol_completion_list_break_on) (skip_prologue_using_sal): Update. * stack.h (iterate_over_block_locals) (iterate_over_block_local_vars): Update. * stack.c (print_frame_args): Update. (iterate_over_block_locals, iterate_over_block_local_vars): Make parameter const. (get_selected_block): Make return type const. * python/py-frame.c (frapy_block): Update. * python/py-block.c (gdbpy_block_for_pc): Update. * p-exp.y (%union) : Now const. * mi/mi-cmd-stack.c (list_args_or_locals): Update. * mdebugread.c (mylookup_symbol, parse_procedure): Update. * m2-exp.y (%union) : Now const. * linespec.c (get_current_search_block): Make return type const. (create_sals_line_offset, find_label_symbols): Update. * inline-frame.c (inline_frame_sniffer, skip_inline_frames): Update. (block_starting_point_at): Make "block" const. * infrun.c (insert_exception_resume_breakpoint): Make "b" const. (check_exception_resume): Update. * guile/scm-frame.c (gdbscm_frame_block): Update. * guile/scm-block.c (gdbscm_lookup_block): Update. * frame.h (get_frame_block): Update. (get_selected_block): Make return type const. * frame.c (frame_id_inner): Update. * f-valprint.c (info_common_command_for_block) (info_common_command): Update. * dwarf2loc.c (dwarf2_find_location_expression) (dwarf_expr_frame_base, dwarf2_compile_expr_to_ax) (locexpr_describe_location_piece): Update. * c-exp.y (%union) : Now const. * breakpoint.c (resolve_sal_pc): Update. * blockframe.c (get_frame_block):Make return type const. (get_pc_function_start, get_frame_function, find_pc_sect_function) (block_innermost_frame): Update. * block.h (blockvector_for_pc, blockvector_for_pc_sect) (block_for_pc, block_for_pc_sect): Update. * block.c (blockvector_for_pc_sect, blockvector_for_pc): Make 'pblock' const. (block_for_pc_sect, block_for_pc): Make return type const. * ax-gdb.c (gen_expr): Update. * alpha-mdebug-tdep.c (find_proc_desc): Update. * ada-lang.c (ada_read_renaming_var_value): Make 'block' const. (ada_make_symbol_completion_list, ada_add_exceptions_from_frame) (ada_read_var_value): Update. * ada-exp.y (struct name_info) : Now const. (%union): Likewise. (block_lookup): Constify. 2014-06-18 Gary Benson * nat/i386-dregs.h: New file. * Makefile.in (HFILES_NO_SRCDIR): Add the above. * i386-nat.h (i386-dregs.h): New include. (DR_FIRSTADDR): Now in i386-dregs.h. (DR_LASTADDR): Likewise. (DR_NADDR): Likewise. (DR_STATUS): Likewise. (DR_CONTROL): Likewise. (i386_debug_reg_state): Likewise. * i386-nat.c (ALL_DEBUG_REGISTERS): Likewise. 2014-06-18 Don Breazeal * breakpoint.c (set_longjmp_breakpoint): Call momentary_breakpoint_from_master with additional argument. (set_longjmp_breakpoint_for_call_dummy): Call momentary_breakpoint_from_master with additional argument. (set_std_terminate_breakpoint): Call momentary_breakpoint_from_master with additional argument. (momentary_breakpoint_from_master): Add argument to function definition and use it to initialize structure member flag. (clone_momentary_breakpoint): Call momentary_breakpoint_from_master with additional argument. * infrun.c (follow_inferior_reset_breakpoints): Clear structure member flags set in momentary_breakpoint_from_master. 2014-06-18 Gary Benson * i386-nat.c (i386_show_dr): Renamed to i386_dr_show and made nonstatic. All uses updated. (i386_length_and_rw_bits): Renamed to i386_dr_length_and_rw_bits and made nonstatic. All uses updated. (i386_insert_aligned_watchpoint): Renamed to i386_dr_insert_aligned_watchpoint and made nonstatic. All uses updated. (i386_remove_aligned_watchpoint): Renamed to i386_dr_remove_aligned_watchpoint and made nonstatic. All uses updated. (i386_update_inferior_debug_regs): Renamed to i386_dr_update_inferior_debug_regs and made nonstatic. All uses updated. 2014-06-18 Gary Benson * i386-nat.c (i386_dr_low_can_set_addr): New macro. (i386_dr_low_can_set_control): Likewise. (i386_dr_low_set_addr): Likewise. (i386_dr_low_set_control): Likewise. (i386_dr_low_get_addr): Likewise. (i386_dr_low_get_status): Likewise. (i386_dr_low_get_control): Likewise. (i386_insert_aligned_watchpoint): Use new macros. (i386_update_inferior_debug_regs): Likewise. (i386_stopped_data_address): Likewise. 2014-06-18 Gary Benson * i386-nat.c (i386_update_inferior_debug_regs) : New parameter. All uses updated. 2014-06-18 Gary Benson * i386-nat.c (maint_show_dr): Renamed to debug_hw_points. All uses updated. 2014-06-18 Gary Benson * i386-nat.c (debug_printf): New macro. (i386_get_debug_register_length): Likewise. (TARGET_HAS_DR_LEN_8): Use above macro. (i386_show_dr): Use debug_printf instead of puts_unfiltered and printf_unfiltered. Use phex to format values. 2014-06-18 Gary Benson * i386-nat.c (i386_handle_nonaligned_watchpoint) : Make const. 2014-06-18 Gary Benson * i386-nat.c: Comment changes. 2014-06-18 Gary Benson * i386-nat.c (I386_DR_WATCH_MASK): Remove macro. 2014-06-18 Gary Benson * i386-nat.c (i386_length_and_rw_bits): Remove prototype. (i386_insert_aligned_watchpoint): Likewise. (i386_remove_aligned_watchpoint): Likewise. (i386_handle_nonaligned_watchpoint): Likewise. 2014-06-18 Gary Benson * i386-nat.c: Whitespace changes. 2014-06-17 Samuel Bronson * MAINTAINERS: Update Roland McGrath's email address. Thanks to Sergio Durigan Junior for pointing out that he left Red Hat a while ago, and giving me a current address. 2014-06-17 Tom Tromey * utils.h (savestring): Remove declaration. 2014-06-17 Tom Tromey * remote.c (extended_remote_run): Use make_cleanup_freeargv. 2014-06-16 Keith Seitz PR mi/15863 * mi/mi-cmd-var.c (mi_cmd_var_update_iter): Do not attempt to update the varobj if inferior_ptid is null_ptid. 2014-06-16 Tom Tromey * target.h (struct target_ops) : Make parameter const. (target_info_proc): Update. * target.c (target_info_proc): Make "args" const. * procfs.c (procfs_info_proc): Update. * linux-tdep.c (linux_info_proc): Update. (linux_core_info_proc_mappings): Make "args" const. (linux_core_info_proc): Update. * gdbarch.sh (info_proc, core_info_proc): Make "args" const. * gdbarch.c: Rebuild. * gdbarch.h: Rebuild. * corelow.c (core_info_proc): Update. 2014-06-16 Tom Tromey * target.h (struct target_ops) : Make parameter const. (target_disconnect): Update. * target.c (target_disconnect): Make "args" const. * target-delegates.c: Rebuild. * remote.c (remote_disconnect): Update. * record.h (record_disconnect): Update. * record.c (record_disconnect): Update. * inf-child.c (inf_child_disconnect): Update. 2014-06-16 Tom Tromey * target.h (struct target_ops) : Make "command" const. * target.c (debug_to_rcmd, default_rcmd): Update. * target-delegates.c: Rebuild. * remote.c (remote_rcmd): Update. * monitor.c (monitor_rcmd): Update. 2014-06-16 Pedro Alves * breakpoint.c (insert_bp_location, remove_breakpoint_1): Adjust. (disable_breakpoints_in_freed_objfile): Skip objfiles that don't have OBJF_SHARED set. * objfiles.c (userloaded_objfile_contains_address_p): Rename to... (shared_objfile_contains_address_p): ... this. Check OBJF_SHARED instead of OBJF_USERLOADED. * objfiles.h (OBJF_SHARED): Update comment. (userloaded_objfile_contains_address_p): Rename to ... (shared_objfile_contains_address_p): ... this, and update comments. * symfile.c (add_symbol_file_command): Also set OBJF_SHARED in the new objfile. (remove_symbol_file_command): Skip objfiles that don't have OBJF_SHARED set. 2014-06-16 Tom Tromey * minsyms.h (prim_record_minimal_symbol) (prim_record_minimal_symbol_and_info): Update comments. 2014-06-14 Eli Zaretskii * top.c (print_gdb_configuration) [HAVE_GUILE]: Print --with-guile or --without-guile, according to how GDB was built. 2014-06-13 Tom Tromey * cp-support.c (maint_cplus_command): Pass all_commands, not -1, to help_list. * guile/guile.c (info_guile_command): Pass all_commands, not -1, to help_list. * tui/tui-win.c (tui_command): Pass all_commands, not -1, to help_list. * tui/tui-regs.c (tui_reg_command): Pass all_commands, not -1, to help_list.Pass all_commands, not -1, to help_list. * cli/cli-dump.c (dump_command, append_command) (srec_dump_command, ihex_dump_command, tekhex_dump_command) (binary_dump_command, binary_append_command): Pass all_commands, not -1, to help_list. * cli/cli-cmds.c (info_command, set_debug): Pass all_commands, not -1, to help_list. * valprint.c (set_print, set_print_raw): Pass all_commands, not -1, to help_list. * typeprint.c (set_print_type): Pass all_commands, not -1, to help_list. * top.c (set_history): Pass all_commands, not -1, to help_list. * target-descriptions.c (set_tdesc_cmd, unset_tdesc_cmd): Pass all_commands, not -1, to help_list. * symfile.c (overlay_command): Pass all_commands, not -1, to help_list. * spu-tdep.c (info_spu_command): Pass all_commands, not -1, to help_list. * serial.c (serial_set_cmd): Pass all_commands, not -1, to help_list. * ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Pass all_commands, not -1, to help_list. * remote.c (remote_command, set_remote_cmd): Pass all_commands, not -1, to help_list. * ravenscar-thread.c (set_ravenscar_command): Pass all_commands, not -1, to help_list. * maint.c (maintenance_command, maintenance_info_command) (maintenance_print_command, maintenance_set_cmd): Pass all_commands, not -1, to help_list. * macrocmd.c (macro_command): Pass all_commands, not -1, to help_list. * language.c (set_check): Pass all_commands, not -1, to help_list. * infcmd.c (unset_command): Pass all_commands, not -1, to help_list. * frame.c (set_backtrace_cmd): Pass all_commands, not -1, to help_list. * dwarf2read.c (set_dwarf2_cmd): Pass all_commands, not -1, to help_list. * dcache.c (set_dcache_command): Pass all_commands, not -1, to help_list. * breakpoint.c (save_command): Pass all_commands, not -1, to help_list. * ada-lang.c (maint_set_ada_cmd, set_ada_command): Pass all_commands, not -1, to help_list. 2014-06-12 Pierre Langlois * regcache.c (struct register_to_invalidate): New structure. (do_register_invalidate, make_cleanup_regcache_invalidate): New functions. (regcache_raw_write): Call make_cleanup_regcache_invalidate. 2014-06-12 Yao Qi * varobj.c (varobj_get_num_children): Call varobj_is_dynamic_p. (varobj_list_children): Likewise. (varobj_update): Likewise. Update comments. 2014-06-12 Yao Qi * varobj.c (varobj_pretty_printed_p): Rename to ... (varobj_is_dynamic_p): ... this. New function. * varobj.h (varobj_pretty_printed_p): Remove declaration. (varobj_is_dynamic_p): Declare. * mi/mi-cmd-var.c (print_varobj): All callers updated. (mi_print_value_p, varobj_update_one): Likewise. 2014-06-12 Pedro Alves Yao Qi * varobj.c: Remove "#if HAVE_PYTHON" and "#endif". (varobj_get_iterator): Wrap up code for pretty-printer by "#if HAVE_PYTHON" and "#endif". (update_dynamic_varobj_children): Likewise. 2014-06-12 Pedro Alves Yao Qi * python/py-varobj.c (py_varobj_iter_next): Return NULL if gdb_python_initialized is false. Move some code from varobj.c. * varobj-iter.h (struct varobj_item): Moved from varobj.c. * varobj.c: Move "varobj-iter.h" inclusion earlier. (struct varobj_item): Moved to varobj-iter.h". (varobj_clear_saved_item): New function. (update_dynamic_varobj_children): Move python-related code to py-varobj.c. (free_variable): Call varobj_clear_saved_item and varobj_iter_delete. 2014-06-12 Pedro Alves Yao Qi * Makefile.in (SUBDIR_PYTHON_OBS): Add "py-varobj.o". (SUBDIR_PYTHON_SRCS): Add "python/py-varobj.c". (HFILES_NO_SRCDIR): Add "varobj-iter.h". (py-varobj.o): New rule. * python/py-varobj.c: New file. * python/python-internal.h (py_varobj_get_iterator): Declare. * varobj-iter.h: New file. * varobj.c: Include "varobj-iter.h" (struct varobj) : Change its type from "PyObject *" to "struct varobj_iter *". : Likewise. [HAVE_PYTHON] (varobj_ensure_python_env): Make it extern. [HAVE_PYTHON] (varobj_get_iterator): New function. (update_dynamic_varobj_children) [HAVE_PYTHON]: Move python-specific code to python/py-varobj.c. (install_visualizer): Call varobj_iter_delete instead of Py_XDECREF. * varobj.h (varobj_ensure_python_env): Declare. 2014-06-12 Yao Qi * varobj.c (struct varobj_item): New structure. (create_child_with_value): Update declaration. (varobj_add_child): Replace arguments 'name' and 'value' with 'item'. All callers updated. (install_dynamic_child): Likewise. (update_dynamic_varobj_children): Likewise. (varobj_add_child): Likewise. (create_child_with_value): Likewise. 2014-06-11 Joel Brobecker * NEWS: Create a new section for the next release branch. Rename the section of the current branch, now that it has been cut. 2014-06-11 Joel Brobecker GDB 7.8 branch created (173373c6f6388171d1d62a217fae90a052395be2): * version.in: Bump version to 7.8.50.DATE-cvs. 2014-06-11 Pedro Alves PR remote/17028 * ser-mingw.c (net_windows_socket_check_pending): New function. (net_windows_select_thread): Ignore spurious wakeups. Use net_windows_socket_check_pending. (net_windows_wait_handle): Check for pending events with ioctlsocket, through net_windows_socket_check_pending, instead of checking the socket's event. 2014-06-10 Siva Chandra Reddy * python/python-internal.h (gdb_PyObject_GetAttrString) (gdb_PyObject_HasAttrString): New inline function definitions. * py-value.c (get_field_flag): Remove the now unnecessary cast to char * of the second argument to PyObject_GetAttrString. 2014-06-10 Joel Brobecker * serial.c (serial_write): Fix index of character to be printed in call to serial_logchar when serial debug traces are enabled. 2014-06-10 Joel Brobecker * gdbtypes (resolve_dynamic_range): Add function description. 2014-06-09 Pedro Alves * linux-nat.c (linux_child_follow_fork): Initialize status with W_STOPCODE (0) instead of 0. Remove shodowing 'status' local from inner block. Only pass the signal to PTRACE_DETACH if in pass state. 2014-06-09 Gary Benson * common/signals.c (gdb_signal_from_host): Reorder to separate the always-available ANSI-standard signals from the signals that require checking. (do_gdb_signal_to_host): Likewise. * proc-events.c (signal_table): Likewise. 2014-06-08 Hui Zhu * common/linux-ptrace.c (linux_disable_event_reporting): New function. * common/linux-ptrace.h (linux_disable_event_reporting): New declaration. * linux-nat.c (linux_child_follow_fork): Do a single step before detach. 2014-06-07 Keith Seitz Revert: PR c++/16253 * ada-lang.c (ada_symbol_matches_domain): Moved here and renamed from symbol_matches_domain in symtab.c. All local callers of symbol_matches_domain updated. (standard_lookup): If DOMAIN is VAR_DOMAIN and no symbol is found, search STRUCT_DOMAIN. (ada_find_any_type_symbol): Do not search STRUCT_DOMAIN independently. standard_lookup will do that automatically. * cp-namespace.c (cp_lookup_symbol_nonlocal): Explain when/why VAR_DOMAIN searches may return a STRUCT_DOMAIN match. (cp_lookup_symbol_in_namespace): Likewise. If no VAR_DOMAIN symbol is found, search STRUCT_DOMAIN. (cp_lookup_symbol_exports): Explain when/why VAR_DOMAIN searches may return a STRUCT_DOMAIN match. (lookup_symbol_file): Search for the class name in STRUCT_DOMAIN. * cp-support.c: Include language.h. (inspect_type): Explicitly search STRUCT_DOMAIN before searching VAR_DOMAIN. * psymtab.c (match_partial_symbol): Compare the requested domain with the symbol's domain directly. (lookup_partial_symbol): Likewise. * symtab.c (lookup_symbol_in_language): Explain when/why VAR_DOMAIN searches may return a STRUCT_DOMAIN match. If no VAR_DOMAIN symbol is found, search STRUCT_DOMAIN for appropriate languages. (symbol_matches_domain): Renamed `ada_symbol_matches_domain' and moved to ada-lang.c (lookup_block_symbol): Explain that this function only returns symbol matching the requested DOMAIN. Compare the requested domain with the symbol's domain directly. (iterate_over_symbols): Compare the requested domain with the symbol's domain directly. * symtab.h (symbol_matches_domain): Remove. 2014-06-06 Doug Evans * guile/guile-internal.h (gdbscm_guile_major_version): Declare. (gdbscm_guile_minor_version, gdbscm_guile_micro_version): Declare. (gdbscm_guile_version_is_at_least): Declare. (gdbscm_scm_string_to_int): Declare. * guile/guile.c (gdbscm_guile_major_version): New global. (gdbscm_guile_minor_version, gdbscm_guile_micro_version): New globals. (guile_datadir): New static global. (gdbscm_guile_data_directory): New function. (initialize_scheme_side): Update. (misc_guile_functions): Add guile-data-directory. (initialize_gdb_module): Fetch guile version number. * guile/lib/gdb.scm: Remove call to add-to-load-path. * guile/lib/gdb/init.scm (%initialize!): Ditto. * guile/lib/gdb/boot.scm: Use guile-data-directory. * guile/scm-exception.c (gdbscm_print_exception_with_stack): Fix comments. * guile/scm-string.c (gdbscm_scm_string_to_int): New function. * guile/scm-utils.c (gdbscm_guile_version_is_at_least): New function. * guile/scm-value.c (gdbscm_value_to_string): Only call scm_port_conversion_strategy if Guile version >= 2.0.6. 2014-06-06 Mingjie Xing * main.c (print_gdb_help): Add -q and --silent. 2014-06-06 Gary Benson * common/signals.c: Remove preprocessor conditionals for always-defined signals SIGINT, SIGILL, SIGABRT, SIGFPE, SIGSEGV and SIGTERM. * proc-events.c: Likewise. 2014-06-06 Markus Metzger * symfile.c (symfile_free_objfile): Remove restriction to OBJF_USERLOADED. * symfile-mem.c (symbol_file_add_from_memory): Call add_target_sections_of_objfile. 2014-06-05 Ludovic Courtès * guile/scm-value.c (gdbscm_history_append_x): Use 'vlscm_get_value_smob_arg_unsafe' instead of 'vlscm_scm_to_value'. 2014-06-05 Simon Marchi PR mi/15806 * utils.c (printchar): Don't escape at all if quoter is NUL. Update function documentation to clarify effect of parameter QUOTER. * remote.c (escape_buffer): Pass '\\' as the quoter to fputstrn_unfiltered. * mi/mi-interp.c (mi_solib_loaded): Use ui_out_field_* functions to generate the output. (mi_solib_unloaded): Same. 2014-06-05 Joel Brobecker * development.sh: Delete. * Makefile.in (config.status): Adjust dependency on development.sh. * configure.ac: Adjust development.sh source call. * configure: Regenerate. 2014-06-04 Doug Evans * guile/scm-breakpoint.c (struct gdbscm_breakpoint_object): New members is_scheme_bkpt, spec. (bpscm_make_breakpoint_smob): Initialize new members. (gdbscm_create_breakpoint_x): Split into two ... (gdbscm_make_breakpoint, gdbscm_register_breakpoint_x): New functions. (bpscm_breakpoint_deleted): Reset breakpoint number and stop function. (scheme_function breakpoint_functions): Update. * guile/lib/gdb.scm: Delete create-breakpoint!. Rename breakpoint-delete! to delete-breakpoint!. Add make-breakpoint, register-breakpoint!. 2014-06-04 Joel Brobecker PR server/17023 * mem-break.c (z_type_supported): Return zero if THE_TARGET->SUPPORTS_Z_POINT_TYPE is NULL. 2014-06-04 Tom Tromey * ada-lang.c (ada_template_to_fixed_record_type_1): Use value_from_contents_and_address_unresolved. (ada_template_to_fixed_record_type_1): Likewise. (ada_which_variant_applies): Likewise. * value.h (value_from_contents_and_address_unresolved): Declare. * value.c (value_from_contents_and_address_unresolved): New function. * gdbtypes.c (is_dynamic_type, resolve_dynamic_type) : New cases. (resolve_dynamic_struct, resolve_dynamic_union): New functions. 2014-06-04 Tom Tromey * gdbtypes.c (is_dynamic_type): Remove unneeded "break"s. 2014-06-04 Tom Tromey * procfs.c (procfs_attach): Make "args" const. * windows-nat.c (windows_attach): Make "args" const. * nto-procfs.c (procfs_attach): Make "args" const. * inf-ttrace.c (inf_ttrace_attach): Make "args" const. * go32-nat.c (go32_attach): Make "args" const. * gnu-nat.c (gnu_attach): Make "args" const. * darwin-nat.c (darwin_attach): Make "args" const. * inf-ptrace.c (inf_ptrace_attach): Make "args" const. * linux-nat.c (linux_nat_attach): Make "args" const. * remote.c (extended_remote_attach_1, extended_remote_attach): Make "args" const. * target.h (struct target_ops) : Make "args" const. (find_default_attach): Likewise. * utils.c (parse_pid_to_attach): Make "args" const. * utils.h (parse_pid_to_attach): Update. 2014-06-04 Tom Tromey * target-delegates.c: Rebuild. * target.c (default_thread_address_space): New function. (target_thread_address_space): Simplify. * target.h (struct target_ops) : Add TARGET_DEFAULT_FUNC. 2014-06-04 Doug Evans * guile/scm-type.c (type_smob): Remove duplicate typedef. 2014-06-04 Markus Metzger * record-btrace.c: Include event-loop.h and inf-loop.h. (record_btrace_resume_exec_dir) (record_btrace_async_inferior_event_handler) (record_btrace_handle_async_inferior_event): New. (record_btrace_open): Create async event handler. (record_btrace_close): Delete async event handler. (record_btrace_resume): Set record_btrace_resume_exec_dir, Mark async event handler. (record_btrace_execution_direction): New. (init_record_btrace_ops): Initialize to_execution_direction. 2014-06-03 Doug Evans * guile/scm-param.c (pascm_make_param_smob): Add ARI comment. (gdbscm_make_parameter): Ditto. 2014-06-03 Doug Evans * exec.c (exec_close_1): Call clear_section_table instead of resize_section_table. (clear_section_table): New function. (resize_section_table): Make static. Rename arg num_added to adjustment. * exec.h (clear_section_table): Declare. (resize_section_table): Delete. * progspace.c (release_program_space): Call clear_section_table instead of resize_section_table. 2014-06-03 Siva Chandra Reddy * NEWS (Python Scripting): Add entry about the new xmethods feature. 2014-06-03 Siva Chandra Reddy * python/py-xmethods.c: New file. * python/py-objfile.c (objfile_object): New field 'xmethods'. (objfpy_dealloc): XDECREF on the new xmethods field. (objfpy_new, objfile_to_objfile_object): Initialize xmethods field. (objfpy_get_xmethods): New function. (objfile_getset): New entry 'xmethods'. * python/py-progspace.c (pspace_object): New field 'xmethods'. (pspy_dealloc): XDECREF on the new xmethods field. (pspy_new, pspace_to_pspace_object): Initialize xmethods field. (pspy_get_xmethods): New function. (pspace_getset): New entry 'xmethods'. * python/python-internal.h: Add declarations for new functions. * python/python.c (_initialize_python): Invoke gdbpy_initialize_xmethods. * python/lib/gdb/__init__.py (xmethods): New attribute. * python/lib/gdb/xmethod.py: New file. * python/lib/gdb/command/xmethods.py: New file. 2014-06-03 Siva Chandra Reddy * eval.c (evaluate_subexp_standard): Call the xmethod if the best match method returned by find_overload_match is an xmethod. * valarith.c (value_x_binop, value_x_unop): Call the xmethod if the best matching operator returned by find_overload_match is an xmethod. * valops.c: #include "extension.h". (find_method_list): Add "fn_list" and "xm_worker_vec" arguments. Return void. The list of matching source methods is returned in "fn_list" and a vector of matching debug method workers is returned in "xm_worker_vec". Update all callers. (value_find_oload_method_list): Likewise. (find_oload_champ): Add "xm_worker_vec" parameter. If it is non-NULL, then the index of the best matching method in this vector is returned. Update all callers. (find_overload_match): Include xmethods while performing overload resolution. 2014-06-03 Siva Chandra Reddy * defs.h (enum lval_type): New enumerator "lval_xcallable". * extension-priv.h (struct extension_language_ops): Add the xmethod interface. * extension.c (new_xmethod_worker, clone_xmethod_worker, get_matching_xmethod_workers, get_xmethod_argtypes, invoke_xmethod, free_xmethod_worker, free_xmethod_worker_vec): New functions. * extension.h: #include "common/vec.h". New function declarations. (struct xmethod_worker): New struct. (VEC (xmethod_worker_ptr)): New vector type. (xmethod_worker_ptr): New typedef. (xmethod_worker_vec): Likewise. * gdbtypes.c (gdbtypes_post_init): Initialize "xmethod" field of builtin_type. * gdbtypes.h (enum type_code): New enumerator TYPE_CODE_XMETHOD. (struct builtin_type): New field "xmethod". * valarith.c (value_ptradd): Assert that the value argument is not lval_xcallable. * valops.c (value_must_coerce_to_target): Return 0 for lval_xcallable values. * value.c (struct value): New field XM_WORKER in the field LOCATION. (value_address, value_raw_address): Return 0 for lval_xcallable values. (set_value_address): Assert that the value is not an lval_xcallable. (value_free): Free the associated xmethod worker when freeing lval_xcallable values. (set_value_component_location): Assert that the WHOLE value is not lval_xcallable. (value_of_xmethod, call_xmethod): New functions. * value.h: Declare "struct xmethod_worker". Declare new functions value_of_xmethod, call_xmethod. 2014-06-03 Joel Brobecker Pedro Alves PR breakpoints/17000 * breakpoint.c (find_non_raw_software_breakpoint_inserted_here): New function, extracted from software_breakpoint_inserted_here_p. (software_breakpoint_inserted_here_p): Replace factored out code by call to find_non_raw_software_breakpoint_inserted_here. (bp_target_info_copy_insertion_state): New function. (bkpt_insert_location): Handle the case of a single-step breakpoint already inserted at the same address. (bkpt_remove_location): Handle the case of a single-step breakpoint still inserted at the same address. (deprecated_insert_raw_breakpoint): Handle the case of non-raw breakpoint already inserted at the same address. (deprecated_remove_raw_breakpoint): Handle the case of a non-raw breakpoint still inserted at the same address. (find_single_step_breakpoint): New function, extracted from single_step_breakpoint_inserted_here_p. (find_single_step_breakpoint): New function, factored out from single_step_breakpoint_inserted_here_p. (single_step_breakpoint_inserted_here_p): Reimplement. 2014-06-03 Brad Mouring (tiny patch) Pushed by Joel Brobecker * source.c (show_substitute_path_command): Fix display of matching substitution rules. 2014-06-03 Gary Benson * gnu-v2-abi.c (gnuv2_value_rtti_type): Use gdb_demangle. 2014-06-02 Doug Evans Add parameter support for Guile. * Makefile.in (SUBDIR_GUILE_OBS): Add scm-param.o. (SUBDIR_GUILE_SRCS): Add scm-param.c. (scm-param.o): New rule. * guile/guile-internal.h (gdbscm_gc_dup_argv): Declare. (gdbscm_misc_error): Declare. (gdbscm_canonicalize_command_name): Declare. (gdbscm_scm_to_host_string): Declare. (gdbscm_scm_from_host_string): Declare. (gdbscm_initialize_parameters): Declare. * guile/guile.c (initialize_gdb_module): Call gdbscm_initialize_parameters. * guile/lib/gdb.scm: Export parameter symbols. * guile/scm-cmd.c (gdbscm_canonicalize_command_name): Renamed from cmdscm_canonicalize_name and made public. All callers updated. * guile/scm-exception.c (gdbscm_misc_error): New function. * guile/scm-param.c: New file. * guile/scm-string.c (gdbscm_scm_to_string): Add comments. (gdbscm_scm_to_host_string): New function. (gdbscm_scm_from_host_string): New function. * scm-utils.c (gdbscm_gc_dup_argv): New function. 2014-06-02 Doug Evans Add command support for Guile. * Makefile.in (SUBDIR_GUILE_OBS): Add scm-cmd.o. (SUBDIR_GUILE_SRCS): Add scm-cmd.c. (scm-cmd.o): New rule. * guile/guile-internal.h (gdbscm_gc_xstrdup): Declare. (gdbscm_user_error_p): Declare. (gdbscm_parse_command_name): Declare. (gdbscm_valid_command_class_p): Declare. (gdbscm_initialize_commands): Declare. * guile/guile.c (initialize_gdb_module): Call gdbscm_initialize_commands. * guile/lib/gdb.scm: Export command symbols. * guile/lib/gdb/init.scm (%exception-keys): Add gdb:user-error. (throw-user-error): New function. * guile/scm-cmd.c: New file. * guile/scm-exception.c (user_error_symbol): New static global. (gdbscm_user_error_p): New function. (gdbscm_initialize_exceptions): Set user_error_symbol. * scm-utils.c (gdbscm_gc_xstrdup): New function. 2014-06-02 Phil Muldoon * top.c (command_loop): Handle comments here... (command_line_input): ... not here. 2014-06-02 Doug Evans Add progspace support for Guile. * Makefile.in (SUBDIR_GUILE_OBS): Add scm-progspace.o. (SUBDIR_GUILE_SRCS): Add scm-progspace.c. (scm-progspace.o): New rule. * guile/guile-internal.h (pspace_smob): New typedef. (psscm_pspace_smob_pretty_printers): Declare. (psscm_pspace_smob_from_pspace): Declare. (psscm_scm_from_pspace): Declare. * guile/guile.c (initialize_gdb_module): Call gdbscm_initialize_pspaces. * guile/lib/gdb.scm: Export progspace symbols. * guile/lib/gdb/printing.scm (prepend-pretty-printer!): Add progspace support. (append-pretty-printer!): Ditto. * guile/scm-pretty-print.c (ppscm_find_pretty_printer_from_progspace): Implement. * guile/scm-progspace.c: New file. 2014-06-03 Alan Modra * ppc64-tdep.c (ppc64_standard_linkage8): New. (ppc64_skip_trampoline_code): Recognise ELFv2 stub supporting fusion. 2014-06-02 Doug Evans Add support for skeletonless type units. * dwarf2read.c (struct dwarf2_per_objfile): New member n_allocated_type_units. (struct dwarf2_per_objfile) : New member nr_all_type_units_reallocs. (create_signatured_type_table_from_index): Initialize n_allocated_type_units (create_all_type_units): Ditto. (add_type_unit): Move up in file. New arg slot. All callers updated. Increase space for all_type_units more efficiently. (fill_in_sig_entry_from_dwo_entry): Handle psymtabs. (lookup_dwo_signatured_type): Handle skeletonless TUs. (lookup_dwp_signatured_type): Ditto. (init_tu_and_read_dwo_dies): New arg use_existing_cu. All callers updated. (build_type_psymtabs_1): Leave type_unit_groups as NULL if no TUs present. (print_tu_stats): New function. (process_skeletonless_type_unit): New function. (process_dwo_file_for_skeletonless_type_units): New function. (process_skeletonless_type_units): New function. (dwarf2_build_psymtabs_hard): Handle skeletonless TUs. Call print tu_stats if debugging enabled. 2014-06-02 Pedro Alves * breakpoint.c (build_target_command_list): Don't build a command list if we have any duplicate location that isn't a dprintf. 2014-06-02 Pedro Alves * breakpoint.c (dprintf_breakpoint_hit): New function. (initialize_breakpoint_ops): Install it as dprintf's breakpoint_hit method. 2014-06-02 Joel Brobecker * source.c (substitute_path_rule_matches): Simplify using filename_ncmp instead of FILENAME_CMP. 2014-06-02 Joel Brobecker * source.c (substitute_path_rule_matches): Remove trailing spaces. 2014-06-01 Ludovic Courtès * configure.ac: When Guile is available, check for the availability of 'scm_new_smob'. * configure, config.h.in: Regenerate. * guile/guile-internal.h (scm_new_smob) [!HAVE_SCM_NEW_SMOB]: New function. 2014-05-30 Andrew Burgess * frame.c (struct frame_info): Add stop_string field. (get_prev_frame_always_1): Renamed from get_prev_frame_always. (get_prev_frame_always): Old content moved into get_prev_frame_always_1. Call get_prev_frame_always_1 inside TRY_CATCH, handle MEMORY_ERROR exceptions. (frame_stop_reason_string): New function definition. * frame.h (unwind_stop_reason_to_string): Extend comment to mention frame_stop_reason_string. (frame_stop_reason_string): New function declaration. * stack.c (frame_info): Switch to frame_stop_reason_string. (backtrace_command_1): Switch to frame_stop_reason_string. * unwind_stop_reason.def: Add UNWIND_MEMORY_ERROR. (LAST_ENTRY): Changed to UNWIND_MEMORY_ERROR. * guile/lib/gdb.scm: Add FRAME_UNWIND_MEMORY_ERROR to export list. 2014-05-30 Andrew Burgess * frame.c (frame_stop_reason_string): Rename to ... (unwind_stop_reason_to_string): this. * frame.h (frame_stop_reason_string): Rename to ... (unwind_stop_reason_to_string): this. * stack.c (frame_info): Update call to frame_stop_reason_string. (backtrace_command_1): Likewise. * guile/scm-frame.c (gdbscm_unwind_stop_reason_string): Likewise. * python/py-frame.c (gdbpy_frame_stop_reason_string): Likewise. 2014-05-30 Andrew Burgess * frame.c (remove_prev_frame): New function. (get_prev_frame_if_no_cycle): Create / discard cleanup using remove_prev_frame. 2014-05-29 Pedro Alves * infrun.c (resume): Rename local 'hw_step' to 'entry_step' and make it const. When a single-step decays to a continue, clear 'step', not 'hw_step'. Pass whether the caller wanted to step to user_visible_resume_ptid, not what we ask the target to do. 2014-05-29 Pedro Alves * infrun.c (process_event_stop_test, handle_step_into_function) (handle_step_into_function_backward): Adjust. Don't set the even thread's stop_step and call stop_waiting before calling end_stepping_range. Instead do that ... (end_stepping_range): ... here. Take an ecs pointer parameter. 2014-05-29 Pedro Alves * infrun.c (stop_stepping): Rename to ... (stop_waiting): ... this. (proceed): Update comment. (process_event_stop_test, handle_inferior_event) (handle_signal_stop, handle_step_into_function) (handle_step_into_function_backward): Update. 2014-05-29 Pedro Alves * infcall.c (run_inferior_call): Don't check whether the current thread is running after the proceed call. 2014-05-29 Pedro Alves Tom Tromey * NEWS: Mention "maint set target-async", "set mi-async", and that background execution commands are now always available. * target.h (target_async_permitted): Update comment. * target.c (target_async_permitted, target_async_permitted_1): Default to 1. (set_target_async_command): Rename to ... (maint_set_target_async_command): ... this. (show_target_async_command): Rename to ... (maint_show_target_async_command): ... this. (_initialize_target): Adjust. * infcmd.c (prepare_execution_command): Make extern. * inferior.h (prepare_execution_command): Declare. * infrun.c (set_observer_mode): Leave target async alone. * mi/mi-interp.c (mi_interpreter_init): Install mi_on_sync_execution_done as sync_execution_done observer. (mi_on_sync_execution_done): New function. (mi_execute_command_input_handler): Don't print the prompt if we just started a synchronous command with an async target. (mi_on_resume): Check sync_execution before printing prompt. * mi/mi-main.h (mi_async_p): Declare. * mi/mi-main.c: Include gdbcmd.h. (mi_async_p): New function. (mi_async, mi_async_1): New globals. (set_mi_async_command, show_mi_async_command, mi_async): New functions. (exec_continue): Call prepare_execution_command. (run_one_inferior, mi_cmd_exec_run, mi_cmd_list_target_features) (mi_execute_async_cli_command): Use mi_async_p. (_initialize_mi_main): Install "set mi-async". Make "target-async" a deprecated alias. 2014-05-29 Pedro Alves * cli/cli-interp.c (cli_interpreter_display_prompt_p): Delete. (_initialize_cli_interp): Adjust. * event-loop.c: Include "observer.h". (start_event_loop): Notify 'command_error' observers instead of calling display_gdb_prompt. Remove FIXME comment. * event-top.c (display_gdb_prompt): Remove call into the interpreters. * inf-loop.c: Include "observer.h". (inferior_event_handler): Notify 'command_error' observers instead of calling display_gdb_prompt. * infrun.c (fetch_inferior_event): Notify 'sync_execution_done' observers instead of calling display_gdb_prompt. * interps.c (interp_set): Don't call display_gdb_prompt. (current_interp_display_prompt_p): Delete. * interps.h (interp_prompt_p): Delete declaration. (interp_prompt_p_ftype): Delete. (struct interp_procs) : Delete field. (current_interp_display_prompt_p): Delete declaration. * mi-interp.c (mi_interpreter_prompt_p): Delete. (_initialize_mi_interp): Adjust. * tui-interp.c (tui_init): Install 'sync_execution_done' and 'command_error' observers. (tui_on_sync_execution_done, tui_on_command_error): New functions. (tui_display_prompt_p): Delete. (_initialize_tui_interp): Adjust. 2014-05-29 Pedro Alves PR gdb/13860 * cli/cli-interp.c: Include infrun.h and observer.h. (cli_uiout, cli_interp): New globals. (cli_on_signal_received, cli_on_end_stepping_range) (cli_on_signal_exited, cli_on_exited, cli_on_no_history): New functions. (cli_interpreter_init): Install them as 'end_stepping_range', 'signal_received' 'signal_exited', 'exited' and 'no_history' observers. (_initialize_cli_interp): Remove cli_interp local. * infrun.c (handle_inferior_event): Call the several stop reason observers instead of printing the stop reason directly. (end_stepping_range): New function. (print_end_stepping_range_reason, print_signal_exited_reason) (print_exited_reason, print_signal_received_reason) (print_no_history_reason): Make static, and add an uiout parameter. Print to that instead of to CURRENT_UIOUT. * infrun.h (print_end_stepping_range_reason) (print_signal_exited_reason, print_exited_reason) (print_signal_received_reason print_no_history_reason): New declarations. * mi/mi-common.h (struct mi_interp): Rename 'uiout' field to 'mi_uiout'. : New field. * mi/mi-interp.c (mi_interpreter_init): Adjust. Create the new uiout for CLI output. Install 'signal_received', 'end_stepping_range', 'signal_exited', 'exited' and 'no_history' observers. (find_mi_interpreter, mi_interp_data, mi_on_signal_received) (mi_on_end_stepping_range, mi_on_signal_exited, mi_on_exited) (mi_on_no_history): New functions. (ui_out_free_cleanup): Delete function. (mi_on_normal_stop): Don't allocate a new uiout for CLI output, instead use the one already stored in the MI interpreter data. (mi_ui_out): Adjust. * tui/tui-interp.c: Include infrun.h and observer.h. (tui_interp): New global. (tui_on_signal_received, tui_on_end_stepping_range) (tui_on_signal_exited, tui_on_exited) (tui_on_no_history): New functions. (tui_init): Install them as 'end_stepping_range', 'signal_received' 'signal_exited', 'exited' and 'no_history' observers. (_initialize_tui_interp): Delete tui_interp local. 2014-05-29 Pedro Alves PR gdb/15713 * linux-nat.c (linux_nat_resume_callback): Rename the second parameter to 'except'. Skip LP if it points to EXCEPT. (linux_nat_resume): Don't mark the event lwp as not stopped before resuming sibling lwps. Instead ask linux_nat_resume_callback to skip the event lwp. Mark it as not stopped after actually resuming it. (linux_handle_syscall_trap): Mark the lwp as not stopped after resuming it. (wait_lwp): Mark the lwp as stopped here. (stop_wait_callback): Mark the lwp as not stopped right after resuming it. Don't mark lwps as stopped here. (linux_nat_filter_event): Mark the lwp as stopped earlier. (linux_nat_wait_1): Don't mark dead lwps as stopped here. 2014-05-29 Pedro Alves PR PR15693 * infrun.c (resume): Determine how much to resume depending on whether the caller wanted a step, not whether we can hardware step the target. Mark all threads that we intend to run as running, unless we're calling an inferior function. (normal_stop): If the thread is running an infcall, don't finish thread state. * target.c (target_resume): Don't mark threads as running here. 2014-05-28 Joel Brobecker * serial.c (_initialize_serial): Remove support for the "set remotebaud" and "show remotebaud" commands. * NEWS: Add entry documenting the removal of that command. 2014-05-28 Yao Qi * charset.c: Fix typo in comments. 2014-05-27 Gary Benson * utils.c (internal_vproblem): Prompt for a bug report. 2014-05-26 Andy Wingo * guile/scm-arch.c (arscm_mark_arch_smob): * guile/scm-block.c (bkscm_mark_block_smob) (bkscm_mark_block_syms_progress_smob): * guile/scm-breakpoint.c (bpscm_mark_breakpoint_smob): * guile/scm-exception.c (exscm_mark_exception_smob): * guile/scm-frame.c (frscm_mark_frame_smob): * guile/scm-iterator.c (itscm_mark_iterator_smob): * guile/scm-lazy-string.c (lsscm_mark_lazy_string_smob): * guile/scm-objfile.c (ofscm_mark_objfile_smob): * guile/scm-pretty-print.c (ppscm_mark_pretty_printer_smob) (ppscm_mark_pretty_printer_worker_smob): * guile/scm-symbol.c (syscm_mark_symbol_smob): * guile/scm-symtab.c (stscm_mark_symtab_smob, stscm_mark_sal_smob): * guile/scm-type.c (tyscm_mark_type_smob, tyscm_mark_field_smob): * guile/scm-value.c (vlscm_mark_value_smob): Remove unnecessary mark functions. * guile/scm-symtab.c (stscm_free_sal_smob): Remove unnecessary free function. 2014-05-26 Andy Wingo Doug Evans * guile/guile-internal.h (GDB_SMOB_HEAD): Replace properties with empty_base_class. All uses updated. (gdbscm_mark_gsmob, gdbscm_mark_chained_gsmob) (gdbscm_mark_eqable_gsmob): Remove these now-unneeded functions. Adapt all callers. * guile/scm-gsmob.c (gdbscm_mark_gsmob) (gdbscm_mark_chained_gsmob, gdbscm_mark_eqable_gsmob): Remove. (gdbscm_gsmob_property, gdbscm_set_gsmob_property_x) (gdbscm_gsmob_has_property_p, add_property_name) (gdbscm_gsmob_properties): Remove, and remove them from gsmob_functions. * guile/lib/gdb.scm (gdb-object-property, set-gdb-object-property) (gdb-object-has-property?, gdb-object-properties): Remove. (gdb-object-kind): Renamed from gsmob-kind. 2014-05-26 Andy Wingo * configure.ac (try_guile_versions): Allow building with guile 2.2. * configure: Regenerate. 2014-05-23 Markus Metzger * symfile-mem.c (symbol_file_add_from_memory): Add BFD sections. 2014-05-23 Markus Metzger * record-btrace.c (record_btrace_allow_memory_access): Remove. (replay_memory_access_read_only, replay_memory_access_read_write) (replay_memory_access_types, replay_memory_access) (set_record_btrace_cmdlist, show_record_btrace_cmdlist) (cmd_set_record_btrace, cmd_show_record_btrace) (cmd_show_replay_memory_access): New. (record_btrace_xfer_partial, record_btrace_insert_breakpoint) (record_btrace_remove_breakpoint): Replace record_btrace_allow_memory_access with replay_memory_access. (_initialize_record_btrace): Add commands. * NEWS: Announce it. 2014-05-22 Ramana Radhakrishnan * aarch64-linux-nat.c (asm/ptrace.h): Include. 2014-05-22 Ramana Radhakrishnan * MAINTAINERS (Write After Approval): Move self back from paper trail. 2014-05-22 Pedro Alves * inferior.h (debug_infrun, debug_displaced, stop_on_solib_events) (sync_execution, sched_multi, step_stop_if_no_debug, non_stop) (disable_randomization, enum exec_direction_kind) (execution_direction, stop_registers, start_remote) (clear_proceed_status, proceed, resume, user_visible_resume_ptid) (wait_for_inferior, normal_stop, get_last_target_status) (prepare_for_detach, fetch_inferior_event, init_wait_for_inferior) (insert_step_resume_breakpoint_at_sal) (follow_inferior_reset_breakpoints, stepping_past_instruction_at) (set_step_info, print_stop_event, signal_stop_state) (signal_print_state, signal_pass_state, signal_stop_update) (signal_print_update, signal_pass_update) (update_signals_program_target, clear_exit_convenience_vars) (displaced_step_dump_bytes, update_observer_mode) (signal_catch_update, gdb_signal_from_command): Move declarations ... * infrun.h: ... to this new file. * amd64-tdep.c: Include infrun.h. * annotate.c: Include infrun.h. * arch-utils.c: Include infrun.h. * arm-linux-tdep.c: Include infrun.h. * arm-tdep.c: Include infrun.h. * break-catch-sig.c: Include infrun.h. * breakpoint.c: Include infrun.h. * common/agent.c: Include infrun.h instead of inferior.h. * corelow.c: Include infrun.h. * event-top.c: Include infrun.h. * go32-nat.c: Include infrun.h. * i386-tdep.c: Include infrun.h. * inf-loop.c: Include infrun.h. * infcall.c: Include infrun.h. * infcmd.c: Include infrun.h. * infrun.c: Include infrun.h. * linux-fork.c: Include infrun.h. * linux-nat.c: Include infrun.h. * linux-thread-db.c: Include infrun.h. * monitor.c: Include infrun.h. * nto-tdep.c: Include infrun.h. * procfs.c: Include infrun.h. * record-btrace.c: Include infrun.h. * record-full.c: Include infrun.h. * remote-m32r-sdi.c: Include infrun.h. * remote-mips.c: Include infrun.h. * remote-notif.c: Include infrun.h. * remote-sim.c: Include infrun.h. * remote.c: Include infrun.h. * reverse.c: Include infrun.h. * rs6000-tdep.c: Include infrun.h. * s390-linux-tdep.c: Include infrun.h. * solib-irix.c: Include infrun.h. * solib-osf.c: Include infrun.h. * solib-svr4.c: Include infrun.h. * target.c: Include infrun.h. * top.c: Include infrun.h. * windows-nat.c: Include infrun.h. * mi/mi-interp.c: Include infrun.h. * mi/mi-main.c: Include infrun.h. * python/py-threadevent.c: Include infrun.h. 2014-05-22 Pedro Alves * infrun.c (handle_inferior_event): Store the exit code for --return-child-result here, instead of ... (print_exited_reason): ... here. 2014-05-21 Pedro Alves PR gdb/13860 * gdbthread.h (struct thread_control_state): New field `command_interp'. * infrun.c (follow_fork): Copy the new thread control field to the child fork thread. (clear_proceed_status_thread): Clear the new thread control field. (proceed): Set the new thread control field. * interps.h (command_interp): Declare. * interps.c (command_interpreter): New global. (command_interp): New function. (interp_exec): Set `command_interpreter' while here. * cli-out.c (cli_uiout_dtor): New function. (cli_ui_out_impl): Install it. * mi/mi-interp.c: Include cli-out.h. (mi_cmd_interpreter_exec): Add comment. (restore_current_uiout_cleanup): New function. (ui_out_free_cleanup): New function. (mi_on_normal_stop): If finishing an execution command started by a CLI command, or any kind of breakpoint-like event triggered, print the stop event to the output (CLI) stream. * mi/mi-out.c (mi_ui_out_impl): Install NULL `dtor' handler. 2014-05-21 Pedro Alves * cli/cli-cmds.c (list_command): Handle the first "list" after the current source line having changed. * frame.h (set_current_sal_from_frame): Remove 'center' parameter. * infrun.c (normal_stop): Adjust call to set_current_sal_from_frame. * source.c (clear_lines_listed_range): New function. (set_current_source_symtab_and_line, identify_source_line): Clear the lines listed range. (line_info): Handle the first "info line" after the current source line having changed. * stack.c (print_stack_frame): Remove center handling. (set_current_sal_from_frame): Remove 'center' parameter. Don't center sal.line. 2014-05-21 Pedro Alves * inf-child.c (inf_child_mourn_inferior): New function. * inf-child.h (inf_child_mourn_inferior): New declaration. * darwin-nat.c (darwin_mourn_inferior): Use inf_child_mourn_inferior. * gnu-nat.c (gnu_mourn_inferior): Likewise. * inf-ptrace.c (inf_ptrace_mourn_inferior): Likewise. * inf-ttrace.c (inf_ttrace_mourn_inferior): Likewise. * nto-procfs.c (procfs_mourn_inferior): Likewise. * windows-nat.c (windows_mourn_inferior): Likewise. 2014-05-21 Doug Evans * guile/scm-breakpoint.c (breakpoint_functions): Fix typo. 2014-05-21 Doug Evans * guile/scm-exception.c (gdbscm_invalid_object_error): Make result void. (gdbscm_out_of_range_error): Ditto. (gdbscm_memory_error): Ditto. * guile/scm-string.c (gdbscm_scm_to_target_string_unsafe): Delete. * guile/guile-internal.h (gdbscm_invalid_object_error): Update. (gdbscm_out_of_range_error): Update. (gdbscm_memory_error): Update. (gdbscm_scm_to_target_string_unsafe): Delete. 2014-05-21 Pedro Alves * inf-child.c (inf_child_ops, inf_child_explicitly_opened): New globals. (inf_child_open_target): New function. (inf_child_open): Use inf_child_open_target to push the target instead of erroring out. (inf_child_disconnect, inf_child_close) (inf_child_maybe_unpush_target): New functions. (inf_child_target): Install inf_child_disconnect and inf_child_close. Store a pointer to the returned object. * inf-child.h (inf_child_open_target, inf_child_maybe_unpush): New declarations. * target.c (auto_connect_native_target): New global. (show_default_run_target): New function. (find_default_run_target): Return NULL if automatically connecting to the native target is disabled. (_initialize_target): Install set/show auto-connect-native-target. * NEWS: Mention "set auto-connect-native-target", and "target native". * linux-nat.c (super_close): New global. (linux_nat_close): Call super_close. (linux_nat_add_target): Store a pointer to the base class's to_close method. * inf-ptrace.c (inf_ptrace_mourn_inferior, inf_ptrace_detach): Use inf_child_maybe_unpush. * inf-ttrace.c (inf_ttrace_him): Don't push the target if it is already pushed. (inf_ttrace_mourn_inferior): Only unpush the target after mourning the inferior. Use inf_child_maybe_unpush_target. (inf_ttrace_attach): Don't push the target if it is already pushed. (inf_ttrace_detach): Use inf_child_maybe_unpush_target. * darwin-nat.c (darwin_mourn_inferior): Only unpush the target after mourning the inferior. Use inf_child_maybe_unpush_target. (darwin_attach_pid): Don't push the target if it is already pushed. * gnu-nat.c (gnu_mourn_inferior): Only unpush the target after mourning the inferior. Use inf_child_maybe_unpush_target. (gnu_detach): Use inf_child_maybe_unpush_target. * go32-nat.c (go32_create_inferior): Don't push the target if it is already pushed. (go32_mourn_inferior): Use inf_child_maybe_unpush_target. * nto-procfs.c (procfs_is_nto_target): Adjust comment. (procfs_open): Rename to ... (procfs_open_1): ... this. Add target_ops parameter. Adjust comments. Can target_preopen before changing node. Call inf_child_open_target to push the target explicitly. (procfs_attach): Don't push the target if it is already pushed. (procfs_detach): Use inf_child_maybe_unpush_target. (procfs_create_inferior): Don't push the target if it is already pushed. (nto_native_ops): New global. (procfs_open): Reimplement. (procfs_native_open): New function. (init_procfs_targets): Install procfs_native_open as to_open of "target native". Store a pointer to the "native" target in nto_native_ops. * procfs.c (procfs_attach): Don't push the target if it is already pushed. (procfs_detach): Use inf_child_maybe_unpush_target. (procfs_mourn_inferior): Only unpush the target after mourning the inferior. Use inf_child_maybe_unpush_target. (procfs_init_inferior): Don't push the target if it is already pushed. * windows-nat.c (do_initial_windows_stuff): Don't push the target if it is already pushed. 2014-05-21 Pedro Alves * NEWS: Mention that the "child", "GNU, "djgpp", "darwin-child" and "procfs" targets are now called "native" instead. 2014-05-21 Pedro Alves * go32-nat.c (go32_open): Delete. (go32_target): Don't override the to_open method. 2014-05-21 Pedro Alves * nto-procfs.c (procfs_can_run): New function. (nto_procfs_ops): New global. (init_procfs_targets): New, based on procfs_target. Install "target native" in addition to "target procfs". (_initialize_procfs): Call init_procfs_targets instead of adding the target here. 2014-05-21 Pedro Alves * windows-nat.c (windows_target): Don't override to_shortname, to_longname or to_doc. 2014-05-21 Pedro Alves * gnu-nat.c (gnu): Don't override to_shortname, to_longname or to_doc. 2014-05-21 Pedro Alves * darwin-nat.c (_initialize_darwin_inferior): Don't override to_shortname, to_longname or to_doc. 2014-05-21 Pedro Alves * go32-nat.c (go32_target): Don't override to_shortname, to_longname or to_doc. 2014-05-21 Pedro Alves * inf-child.c (inf_child_open): Remove mention of "child". (inf_child_target): Rename target to "native" instead of "child". 2014-05-21 Andreas Arnez * Makefile.in (SFILES): Delete "regset.c". (COMMON_OBS): Delete "regset.o". * regset.c: Remove. * regset.h (regset_alloc): Delete prototype. 2014-05-21 Andreas Arnez * sparc-linux-tdep.c (sparc32_linux_gregset) (sparc32_linux_fpregset): New static regset structures. (sparc32_linux_init_abi): Drop dynamic regset allocations. * sparc-tdep.h (struct gdbarch_tdep): Constify 'gregset' and 'fpregset' fields. * sparc64-linux-tdep.c: (sparc64_linux_gregset) (sparc64_linux_fpregset): New static regset structures. (sparc64_linux_init_abi): Drop dynamic regset allocations. * sparc64fbsd-tdep.c (sparc64fbsd_gregset, sparc64fbsd_fpregset): New static regset structures. (sparc64fbsd_init_abi): Drop dynamic regset allocations. * sparc64nbsd-tdep.c (sparc64nbsd_gregset, sparc64nbsd_fpregset): New static regset structures. (sparc64nbsd_init_abi): Drop dynamic regset allocations. * sparc64obsd-tdep.c (sparc64obsd_gregset, sparc64obsd_fpregset): New static regset structures. (sparc64obsd_init_abi): Drop dynamic regset allocations. * sparcnbsd-tdep.c (sparc32nbsd_gregset, sparc32nbsd_fpregset): New static regset structures. (sparc32nbsd_init_abi): Drop dynamic regset allocations. 2014-05-21 Andreas Arnez * sparc-linux-nat.c (supply_gregset, supply_fpregset) (fill_gregset, fill_fpregset, _initialize_sparc_linux_nat): Rename register maps ("regmaps") from "*regset" to "*regmap". Do this for all regmap types and variables. * sparc-linux-tdep.c (sparc32_linux_step_trap) (sparc32_linux_supply_core_gregset) (sparc32_linux_collect_core_gregset) (sparc32_linux_supply_core_fpregset) (sparc32_linux_collect_core_fpregset): Likewise. * sparc-nat.c (sparc_gregset, sparc_fpregset): Rename to... (sparc_gregmap, sparc_fpregmap): ... these. (sparc_supply_gregset, sparc_collect_gregset) (sparc_supply_fpregset, sparc_collect_fpregset): Likewise. (sparc_fetch_inferior_registers, sparc_store_inferior_registers) (_initialize_sparc_nat): Rename regmaps. * sparc-nat.h (sparc_gregset, sparc_fpregset): Rename to... (sparc_gregmap, sparc_fpregmap): ... these. (sparc_supply_gregset, sparc_collect_gregset) (sparc_supply_fpregset, sparc_collect_fpregset): Likewise. * sparc-sol2-nat.c (sparc_sol2_gregset, sparc_sol2_fpregset): Rename macros to... (sparc_sol2_gregmap, sparc_sol2_fpregmap): ... these. (supply_gregset, supply_fpregset, fill_gregset, fill_fpregset): Likewise. * sparc-sol2-tdep.c (sparc32_sol2_gregset, sparc32_sol2_fpregset): Rename to... (sparc32_sol2_gregmap, sparc32_sol2_fpregmap): ... these. * sparc-tdep.c (sparc32_supply_gregset, sparc32_collect_gregset) (sparc32_supply_fpregset, sparc32_collect_fpregset): Rename regmaps. (sparc32_sunos4_gregset, sparc32_sunos4_fpregset) (sparc32_bsd_fpregset): Rename to... (sparc32_sunos4_gregmap, sparc32_sunos4_fpregmap) (sparc32_bsd_fpregmap): ... these. * sparc-tdep.h (struct sparc_gregset, struct sparc_fpregset) (sparc32_sunos4_gregset, sparc32_sunos4_fpregset) (sparc32_bsd_fpregset, sparc32_sol2_gregset) (sparc32_sol2_fpregset, sparc32nbsd_gregset): Rename to... (struct sparc_gregmap, struct sparc_fpregmap) (sparc32_sunos4_gregmap, sparc32_sunos4_fpregmap) (sparc32_bsd_fpregmap, sparc32_sol2_gregmap) (sparc32_sol2_fpregmap, sparc32nbsd_gregmap): ... these. (sparc32_supply_regset, sparc32_collect_gregset) (sparc32_supply_fpregset, sparc32_collect_fpregset): Adjust prototypes. * sparc64-linux-nat.c (sparc64_linux_ptrace_gregset): Rename to... (sparc64_linux_ptrace_gregmap): ... this. (supply_gregset, supply_fpregset, fill_gregset, fill_fpregset) (_initialize_sparc64_linux_nat): Rename regmaps. * sparc64-linux-tdep.c (sparc64_linux_core_gregset): Rename to... (sparc64_linux_core_gregmap): ... this. (sparc64_linux_supply_core_gregset) (sparc64_linux_collect_core_gregset) (sparc64_linux_supply_core_fpregset) (sparc64_linux_collect_core_fpregset): Rename regmaps. * sparc64-sol2-tdep.c (sparc64_sol2_gregset) (sparc64_sol2_fpregset): Rename to... (sparc64_sol2_gregmap, sparc64_sol2_fpregmap): ... these. * sparc64-tdep.c (sparc64_supply_gregset, sparc64_collect_gregset) (sparc64_supply_fpregset, sparc64_collect_fpregset): Rename regmaps. * sparc64-tdep.h (struct sparc_gregset, sparc64_sol2_gregset) (sparc64_sol2_fpregset, sparc64fbsd_gregset, sparc64nbsd_gregset) (sparc64_bsd_fpregset): Rename to... (struct sparc_gregmap, sparc64_sol2_gregmap) (sparc64_sol2_fpregmap, sparc64fbsd_gregmap, sparc64nbsd_gregmap) (sparc64_bsd_fpregmap): ... these. (sparc64_supply_gregset, sparc64_collect_gregset) (sparc64_supply_fpregset, sparc64_collect_fpregset): Adjust prototypes. * sparc64fbsd-nat.c (_initialize_sparc64fbsd_nat): Rename regmaps. * sparc64fbsd-tdep.c (sparc64fbsd_gregset): Rename to... (sparc64fbsd_gregmap): ... this. (sparc64fbsd_supply_gregset, sparc64fbsd_collect_gregset) (sparc64fbsd_supply_fpregset, sparc64fbsd_collect_fpregset): Rename regmaps. * sparc64nbsd-nat.c (sparc64nbsd_supply_gregset) (sparc64nbsd_collect_gregset, sparc64nbsd_supply_fpregset) (sparc64nbsd_collect_fpregset): Likewise. * sparc64nbsd-tdep.c (sparc64nbsd_gregset): Rename to... (sparc64nbsd_gregmap): ... this. (sparc64nbsd_supply_gregset, sparc64nbsd_supply_fpregset): Rename regmaps. * sparc64obsd-nat.c (_initialize_sparc64obsd_nat): Likewise. * sparc64obsd-tdep.c (sparc64obsd_gregset): Rename to... (sparc64obsd_gregmap): ... this. (sparc64obsd_supply_gregset, sparc64obsd_supply_fpregset): Rename regmaps. * sparcnbsd-nat.c (_initialize_sparcnbsd_nat): Likewise. * sparcnbsd-tdep.c (sparc32nbsd_gregset): Rename to... (sparc32nbsd_gregmap): ... this. (sparc32nbsd_supply_gregset, sparc32nbsd_supply_fpregset): Rename regmaps. 2014-05-21 Andreas Arnez * score-tdep.c (score7_linux_gregset): New static regset structure. (score7_linux_regset_from_core_section): Remove dynamic regset allocation. (score_gdbarch_init): Drop allocation of tdep structure. * score-tdep.h (struct gdbarch_tdep): Remove declaration. 2014-05-21 Andreas Arnez * mn10300-linux-tdep.c (am33_gregset, am33_fpregset): New static regset structures. (am33_regset_from_core_section): Remove dynamic regset allocations. 2014-05-21 Andreas Arnez * mips-linux-tdep.c (mips_linux_gregset, mips64_linux_gregset) (mips_linux_fpregset, mips64_linux_fpregset): New static regset structures. (mips_linux_regset_from_core_section): Remove dynamic regset allocations. * mips-tdep.h (struct gdbarch_tdep): Remove fields 'gregset', 'gregset64', 'fpregset', and 'fpregset64'. * mips-tdep.c (mips_gdbarch_init): Remove initialization of deleted tdep fields. 2014-05-21 Andreas Arnez * amd64-tdep.c (amd64_fpregset, amd64_xstateregset): New static regset structures. (amd64_regset_from_core_section): Remove dynamic regset allocations. * amd64obsd-tdep.c (amd64obsd_combined_regset): New static regset structure. (amd64obsd_regset_from_core_section): Remove dynamic regset allocation. * i386-cygwin-tdep.c (i386_windows_regset_from_core_section): Likewise. * i386-nto-tdep.c (i386nto_supply_gregset): Adjust call to x86-common regset supply function. * i386-tdep.c (i386_collect_gregset): Make static. (i386_gregset): New global regset structure. (i386_fpregset, i386_xstateregset): New static regset structures. (i386_regset_from_core_section): Remove dynamic regset allocations. (i386_gdbarch_init): Remove initialization of tdep fields 'gregset', 'fpregset', and 'xstateregset'. * i386-tdep.h (struct gdbarch_tdep): Remove fields 'gregset', 'fpregset', and 'xstateregset'. (i386_collect_gregset): Remove prototype. (i386_gregset): New declaration. * i386obsd-tdep.c (i386obsd_aout_gregset): New static regset structure. (i386obsd_aout_regset_from_core_section): Remove dynamic regset allocation. 2014-05-21 Andreas Arnez * arm-linux-tdep.c (arm_linux_gregset, arm_linux_fpregset) (arm_linux_vfpregset): New static regset structures. (arm_linux_regset_from_core_section): Remove dynamic allocation of regset structures. * arm-tdep.h (struct gdbarch_tdep): Remove 'gregset', 'fpregset', and 'vfpregset' fields. 2014-05-21 Andreas Arnez * aarch64-linux-tdep.c (aarch64_linux_gregset) (aarch64_linux_fpregset): New static regset structures. (aarch64_linux_regset_from_core_section): Drop dynamic allocation of regset structures. * aarch64-tdep.h (struct gdbarch_tdep): Remove 'gregset' and 'fpregset' fields. 2014-05-21 Andreas Arnez * regset.h (struct regset): Remove gdbarch field. * regset.c (regset_alloc): Drop initialization of gdbarch field. * nios2-linux-tdep.c (nios2_core_regset): Likewise. * ppcfbsd-tdep.c (ppc32_fbsd_gregset, ppc64_fbsd_gregset): Likewise. * ppc-linux-tdep.c (ppc32_linux_gregset, ppc64_linux_gregset) (ppc32_linux_fpregset, ppc32_linux_vrregset) (ppc32_linux_vsxregset): Likewise. * i386obsd-tdep.c (i386obsd_aout_supply_regset): Get the gdbarch via the regcache instead of the regset. * i386-tdep.c (i386_supply_gregset, i386_collect_gregset) (i386_supply_fpregset, i386_collect_fpregset): Likewise. * amd64obsd-tdep.c (amd64obsd_supply_regset): Likewise. * amd64-tdep.c (amd64_supply_fpregset, amd64_collect_fpregset): Likewise. 2014-05-21 Andreas Arnez * alpha-linux-tdep.c (alpha_linux_gregset, alpha_linux_fpregset): Constify structures. * alphanbsd-tdep.c (alphanbsd_gregset, alphanbsd_fpregset) (alphanbsd_aout_gregset): Likewise. * armbsd-tdep.c (armbsd_gregset, armbsd_fpregset): Likewise. * frv-linux-tdep.c (frv_linux_gregset, frv_linux_fpregset): Likewise. * hppa-hpux-tdep.c (hppa_hpux_regset): Likewise. * hppa-linux-tdep.c (hppa_linux_regset, hppa_linux_fpregset): Likewise. * hppanbsd-tdep.c (hppanbsd_gregset): Likewise. * hppaobsd-tdep.c (hppaobsd_gregset, hppaobsd_fpregset): Likewise. * m32r-linux-tdep.c (m32r_linux_gregset): Likewise. * m68kbsd-tdep.c (m68kbsd_gregset, m68kbsd_fpregset): Likewise. * m88k-tdep.c (m88k_gregset): Likewise. * mips64obsd-tdep.c (mips64obsd_gregset): Likewise. * mipsnbsd-tdep.c (mipsnbsd_gregset, mipsnbsd_fpregset): Likewise. * nios2-linux-tdep.c (nios2_core_regset): Likewise. * ppcfbsd-tdep.c (ppc32_fbsd_fpregset): Likewise. * ppcnbsd-tdep.c (ppcnbsd_gregset, ppcnbsd_fpregset): Likewise. * ppcnbsd-tdep.h (ppcnbsd_gregset, ppcnbsd_fpregset): Likewise. * ppcobsd-tdep.c (ppcobsd_gregset, ppcobsd_fpregset): Likewise. * ppcobsd-tdep.h (ppcobsd_gregset, ppcobsd_fpregset): Likewise. * rs6000-aix-tdep.c (rs6000_aix32_regset, rs6000_aix64_regset): Likewise. * sh-tdep.c (sh_corefile_gregset, sh_corefile_fpregset): Likewise. * sh-tdep.h (sh_corefile_gregset): Likewise. * tilegx-linux-tdep.c (tilegx_linux_regset): Likewise. * vax-tdep.c (vax_gregset): Likewise. 2014-05-21 Jan Kratochvil Fix TLS access for -static -pthread. * linux-thread-db.c (struct thread_db_info): Add td_thr_tlsbase_p. (try_thread_db_load_1): Initialize it. (thread_db_get_thread_local_address): Call it if LM is zero. * target.c (target_translate_tls_address): Remove LM_ADDR zero check. * target.h (struct target_ops) (to_get_thread_local_address): Add load_module_addr comment. 2014-05-21 Pedro Alves * dcache.c (dcache_read_memory_partial): If reading the cache line fails, fallback to reading just the memory the caller wanted. 2014-05-20 Doug Evans * python/py-progspace.c (py_free_pspace): Call target_gdbarch instead of get_current_arch. 2014-05-20 Pedro Alves * NEWS: Mention that compare-sections now works with all targets. * remote.c (PACKET_qCRC): New enum value. (remote_verify_memory): Don't send qCRC if the target has no execution. Use packet_support/packet_ok. If the target doesn't support the qCRC packet, fallback to a deep memory copy. (compare_sections_command): Say "target image" instead of "remote executable". (_initialize_remote): Add PACKET_qCRC to the list of config packets that have no associated command. Extend comment. * target.c (simple_verify_memory, default_verify_memory): New function. * target.h (struct target_ops) : Default to default_verify_memory. (simple_verify_memory): New declaration. * target-delegates.c: Regenerate. 2014-05-20 Markus Metzger * record-btrace.c (record_btrace_step_thread): Check for empty history. 2014-05-20 Hui Zhu Yao Qi PR backtrace/16558 * aarch64-linux-tdep.c (aarch64_linux_sigframe_init): Update comments and change address of sp and pc. 2014-05-19 Tom Tromey * gdbtypes.c (rank_function): Use XNEWVEC. * mi/mi-cmds.c (build_table): Use XCNEWVEC. 2014-05-19 Doug Evans * dwarf2read.c (build_type_psymtabs_1): Renamed from build_type_unit_groups and moved closer to only caller. Remove arguments. All references updated. Remove outdated .gdb_index comment. (struct tu_abbrev_offset, sort_tu_by_abbrev_offset): Move with build_type_psymtabs_1. 2014-05-19 Doug Evans * dwarf2read.c (struct dwarf2_per_objfile): Delete unused members n_type_unit_groups, all_type_unit_groups. All uses removed. (get_type_unit_group, build_type_unit_groups): Delete forward decls. (dw2_get_cutu): Renamed from dw2_get_cu. All callers updated. (dw2_get_cu): Renamed from dw2_get_primary_cu. All callers updated. (add_type_unit_group_to_table): Delete. 2014-05-19 Doug Evans * eval.c (evaluate_subexp_standard): Add some comments. 2014-05-17 Doug Evans * progspace.c (remove_program_space): Delete, unused. * progspace.h (remove_program_space): Ditto. 2014-05-17 Doug Evans * inferior.c (prune_inferiors): Fix comment. (remove_inferior_command): Call prune_program_spaces. 2014-05-16 Doug Evans New command line option -D. * NEWS: Mention it. * main.c (set_gdb_data_directory): New function. (captured_main): Recognize -D. Flag error for --data-directory "". Call set_gdb_data_directory. (print_gdb_help): Print --data-directory, -D. * main.h (set_gdb_data_directory): Declare. * top.c (staged_gdb_datadir): New static global. (set_gdb_datadir): Call set_gdb_data_directory (show_gdb_datadir): New function. (init_main): Update init of data-directory parameter. 2014-05-16 Gregory Fong Import the "dirfd" gnulib module. * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add dirfd. * gnulib/aclocal.m4: Update. * gnulib/config.in: Update. * gnulib/configure: Update. * gnulib/import/Makefile.am: Update. * gnulib/import/Makefile.in: Update. * gnulib/import/dirfd.c: New. * gnulib/import/m4/dirfd.m4: New. * gnulib/import/m4/gnulib-cache.m4: Update. * gnulib/import/m4/gnulib-comp.m4: Update. 2014-05-16 Pierre Muller Yao Qi * valprint.c (print_wchar): Move the code on checking whether W is a printable wide char to the default branch of switch statement below. Call wchar_printable instead of gdb_iswprint. 2014-05-16 Taimoor Mirza * arm-tdep.c (thumb_analyze_prologue): Fix offset calculation for ldr.w and ldrd instructions. 2014-05-15 Doug Evans * dwarf2read.c (read_structure_type): Delete outdated comments. 2014-05-14 Tom Tromey * macrocmd.c (print_macro_definition): Reindent. 2014-05-13 Doug Evans * python/py-cmd.c (cmdpy_completer): Add comment. (completers): Make const. 2014-05-13 Simon Marchi * infrun.c (resume): Remove should_resume (unused). Move up declaration of resume_ptid. 2014-05-13 Tom Tromey * language.h (unop_type_check): Remove. (binop_type_check): Don't declare. 2014-05-13 Andreas Arnez * s390-linux-nat.c (fill_gregset): Remove erroneous offset 4 in call to regcache_raw_collect. 2014-05-12 Simon Marchi * mi/mi-console.c (mi_console_raw_packet): Use the value from mi_console->quote as the quoting character. 2014-05-12 Simon Marchi * MAINTAINERS (Write After Approval): Add "Simon Marchi". 2014-04-29 Tom Tromey * varobj.c (_initialize_varobj): Rename to "set debug varobj" and "show debug varobj". 2014-05-07 Kyle McMartin Pushed by Joel Brobecker . * aarch64-tdep.c (aarch64_software_single_step): New function. (aarch64_gdbarch_init): Handle single stepping of atomic sequences with aarch64_software_single_step. 2014-05-05 Joel Brobecker GDB 7.7.1 released. 2014-05-05 Keith Seitz * linespec.c (linespec_parse_basic): Run cleanups if a convenience variable or history value is successfully parsed. 2014-05-05 Yao Qi Pedro Alves * tracefile-tfile.c (tfile_xfer_partial): Record the lowest address of blocks that intersects the requested range. Trim LEN up to LOW_ADDR_AVAILABLE if read from executable read-only sections. * ctf.c (ctf_xfer_partial): Likewise. 2014-05-05 Yao Qi * printcmd.c (display_command): Remove the check to target_has_execution. 2014-05-03 Mark Kettenis * ppcobsd-nat.c: Include "obsd-nat.h". (_initialize_ppcobsd_nat): Call obsd_add_target instead of add_target. * config/powerpc/obsd.mh (NATDEPFILES): Add obsd-nat.o. 2014-05-02 Sergio Durigan Junior * stap-probe.c (enum stap_arg_bitness): New enums to represent 8 and 16-bit signed and unsigned arguments. Update comment. (stap_parse_probe_arguments): Extend code to handle such arguments. Use warning instead of complaint to notify about unrecognized bitness. 2014-05-02 Sergio Durigan Junior PR breakpoints/16889 * stap-probe.c (stap_parse_probe_arguments): Simplify check for non-prefixed probes (i.e., probes whose arguments do not start with "N@"). Always set the argument type to a sane value. 2014-05-01 David Taylor * remote.c (compare_sections_command): Add -r option to compare all loadable read-only sections. 2014-04-30 Siva Chandra Reddy * dwarf2loc.c (dwarf2_locexpr_baton_eval, dwarf2_evaluate_property): Remove unused CORE_ADDR argument. Update all callers. * dwarf2loc.h (dwarf2_evaluate_property): Update signature. * gdbtypes.c (resolve_dynamic_range, resolve_dynamic_array): Remove unused CORE_ADDR argument. Update all callers. 2014-04-29 Pedro Alves * remote.c (struct packet_config) : Extend comment. (add_packet_config_cmd): Don't set the config's detect or support fields here. (init_all_packet_configs): Also initialize the config's 'detect' field. (reset_all_packet_configs_support): New function. (remote_open_1): Call reset_all_packet_configs_support instead of init_all_packet_configs. (_initialize_remote): Initialize all packet configs. Assert that all packets have an associated command, except a few known outliers. 2014-04-28 Joel Brobecker * dwarf2read.c (read_subrange_type): Handle dynamic DW_AT_lower_bound attributes. 2014-04-28 Joel Brobecker * ada-lang.c (ada_discrete_type_high_bound): Resolve the type's dynamic bounds before computing its upper bound. (ada_discrete_type_low_bound): Same as above with the lower bound. 2014-04-28 Joel Brobecker * dwarf2read.c (is_dynamic_type): Return true for dynamic range types. Adjust the array handling implementation to take advantage of this change. (resolve_dynamic_range): New function, mostly extracted from resolve_dynamic_bounds. (resolve_dynamic_array): New function, mostly extracted from resolve_dynamic_bounds. (resolve_dynamic_bounds): Delete. (resolve_dynamic_type): Reimplement. Add handling of TYPE_CODE_RANGE types. 2014-04-28 Joel Brobecker * ada-varobj.c (ada_varobj_describe_simple_array_child): Remove handling of parallel ___XA types. 2014-04-28 Joel Brobecker * ada-lang.c (ada_evaluate_subexp) : Remove unnecessary second call to static_unwrap_type. 2014-04-27 Hui Zhu * stack.c (print_frame_info): Call do_gdb_disassembly with DUMMY_FRAME, SIGTRAMP_FRAME and ARCH_FRAME. 2014-04-26 Doug Evans * guile/scm-safe-call.c (scscm_eval_scheme_string): Fix comment. 2014-04-25 Pedro Alves PR server/16255 * common/linux-ptrace.c (linux_ptrace_attach_warnings): Rename to ... (linux_ptrace_attach_fail_reason): ... this. Remove "warning: " and newline from built string. * common/linux-ptrace.h (linux_ptrace_attach_warnings): Rename to ... (linux_ptrace_attach_fail_reason): ... this. * linux-nat.c (linux_nat_attach): Adjust to use linux_ptrace_attach_fail_reason. 2014-04-25 Pedro Alves * remote.c (struct remote_state): Remove multi_process_aware, non_stop_aware, cond_tracepoints, cond_breakpoints, breakpoint_commands, fast_tracepoints, static_tracepoints, install_in_trace, disconnected_tracing, enable_disable_tracepoints, string_tracing, and augmented_libraries_svr4_read fields. (remote_multi_process_p): Move further below in the file. (struct packet_config): Add comments. (update_packet_config): Delete function. (show_packet_config_cmd): Use packet_config_support. (add_packet_config_cmd): Use NULL as set callback. (packet_ok): "set remote foo-packet"-style commands no longer change config->supported -- adjust. (PACKET_ConditionalTracepoints, PACKET_ConditionalBreakpoints) (PACKET_BreakpointCommands, PACKET_FastTracepoints) (PACKET_StaticTracepoints, PACKET_InstallInTrace): Add comments. (PACKET_QNonStop, PACKET_multiprocess_feature) (PACKET_EnableDisableTracepoints_feature, PACKET_tracenz_feature) (PACKET_DisconnectedTracing_feature) (PACKET_augmented_libraries_svr4_read_feature): New enum values. (set_remote_protocol_packet_cmd): Delete function. (packet_config_support, packet_support): New functions. (set_remote_protocol_Z_packet_cmd): Don't call update_packet_config. (remote_query_attached, remote_pass_signals) (remote_program_signals, remote_threads_info) (remote_threads_extra_info, remote_start_remote): Use packet_support. (remote_start_remote): Use packet_config_support and packet_support. (init_all_packet_configs): Set all packets to unknown support, instead of calling update_packet_config. (remote_check_symbols): Use packet_support. (remote_supported_packet): Unconditionally set the packet config's support status. (remote_multi_process_feature, remote_non_stop_feature) (remote_cond_tracepoint_feature, remote_cond_breakpoint_feature) (remote_breakpoint_commands_feature) (remote_fast_tracepoint_feature, remote_static_tracepoint_feature) (remote_install_in_trace_feature) (remote_disconnected_tracing_feature) (remote_enable_disable_tracepoint_feature) (remote_string_tracing_feature) (remote_augmented_libraries_svr4_read_feature): Delete functions. (remote_protocol_features): Adjust to use remote_supported_packet for "augmented-libraries-svr4-read", "multiprocess", "QNonStop", "ConditionalTracepoints", "ConditionalBreakpoints", "BreakpointCommands", "FastTracepoints", "StaticTracepoints", "InstallInTrace", "DisconnectedTracing", "DisconnectedTracing", "EnableDisableTracepoints", and "tracenz". (remote_query_supported): Use packet_support. (remote_open_1): Adjust. (extended_remote_attach_1): Use packet_support. Switch on the result of packet_ok instead of checking whether the packet ended up disabled. (remote_vcont_resume): Use packet_support. (remote_resume, remote_stop_ns, fetch_register_using_p) (remote_prepare_to_store, store_register_using_P) (check_binary_download, remote_write_bytes): Use packet_support. (remote_vkill): Use packet_support. Switch on the result of packet_ok instead of checking whether the packet ended up disabled. (extended_remote_supports_disable_randomization): Use packet_support. (extended_remote_run): Switch on the result of packet_ok instead of checking whether the packet ended up disabled. (remote_insert_breakpoint, remote_remove_breakpoint) (remote_insert_watchpoint, remote_remove_watchpoint) (remote_insert_hw_breakpoint, remote_remove_hw_breakpoint): Use packet_support. (remote_search_memory): Use packet_config_support. (remote_get_thread_local_address, remote_get_tib_address) (remote_hostio_send_command, remote_can_execute_reverse): Use packet_support. (remote_supports_cond_tracepoints) (remote_supports_cond_breakpoints) (remote_supports_fast_tracepoints) (remote_supports_static_tracepoints) (remote_supports_install_in_trace) (remote_supports_enable_disable_tracepoint) (remote_supports_string_tracing) (remote_can_run_breakpoint_commands): Rewrite, checking whether the packet config says the feature is enabled or disabled. (remote_download_tracepoint, remote_trace_set_readonly_regions) (remote_get_trace_status): Use packet_support. (remote_set_disconnected_tracing): Adjust to check whether the feature is enabled with packet_support. (remote_set_trace_buffer_size, remote_use_agent) (remote_can_use_agent, remote_supports_btrace): Use packet_support. (remote_enable_btrace, remote_disable_btrace, remote_read_btrace): Use packet_config_support. (remote_augmented_libraries_svr4_read): Rewrite, checking whether the packet config says the feature is enabled or disabled. (set_range_stepping): Use packet_support. 2014-04-25 Tom Tromey * cli/cli-cmds.c (_initialize_cli_cmds): Document "quit" command's argument. 2014-04-24 Sanimir Agovic * NEWS: Mention support for C99 variable length arrays. 2014-04-24 Joel Brobecker * ada-lang.c (standard_exc): Expand introductory comment. 2014-04-24 Michael Sturm Walfred Tedeschi * amd64-linux-nat.c (amd64_linux_gregset32_reg_offset): Add AVX512 registers. (amd64_linux_read_description): Add code to handle AVX512 xstate mask and return respective tdesc. * amd64-linux-tdep.c: Include features/i386/amd64-avx512-linux.c and features/i386/x32-avx512-linux.c. (amd64_linux_gregset_reg_offset): Add AVX512 registers. (amd64_linux_core_read_description): Add code to handle AVX512 xstate mask and return respective tdesc. (_initialize_amd64_linux_tdep): Initialize AVX512 tdesc. * amd64-linux-tdep.h (AMD64_LINUX_ORIG_RAX_REGNUM): Adjust regnum calculation. (AMD64_LINUX_NUM_REGS): Adjust to new number of registers. (tdesc_amd64_avx512_linux): New prototype. (tdesc_x32_avx512_linux): Likewise. * amd64-tdep.c: Include features/i386/amd64-avx512.c and features/i386/x32-avx512.c. (amd64_ymm_avx512_names): New register names for pseudo registers YMM16-31. (amd64_ymmh_avx512_names): New register names for raw registers YMMH16-31. (amd64_k_names): New register names for K registers. (amd64_zmmh_names): New register names for ZMM raw registers. (amd64_zmm_names): New registers names for ZMM pseudo registers. (amd64_xmm_avx512_names): New register names for XMM16-31 registers. (amd64_pseudo_register_name): Add code to return AVX512 pseudo registers. (amd64_init_abi): Add code to intitialize AVX512 tdep variables if feature is present. (_initialize_amd64_tdep): Call AVX512 tdesc initializers. * amd64-tdep.h (enum amd64_regnum): Add AVX512 registers. (AMD64_NUM_REGS): Adjust to new number of registers. * i386-linux-nat.c (GETXSTATEREGS_SUPPLIES): Extend range of registers supplied via XSTATE by AVX512 registers. (i386_linux_read_description): Add case for AVX512. * i386-linux-tdep.c: Include i386-avx512-linux.c. (i386_linux_gregset_reg_offset): Add AVX512 registers. (i386_linux_core_read_description): Add case for AVX512. (i386_linux_init_abi): Install supported register note section for AVX512. (_initialize_i386_linux_tdep): Add call to tdesc init function for AVX512. * i386-linux-tdep.h (I386_LINUX_NUM_REGS): Set number of registers to be number of zmm7h + 1. (tdesc_i386_avx512_linux): Add tdesc for AVX512 registers. * i386-tdep.c: Include features/i386/i386-avx512.c. (i386_zmm_names): Add ZMM pseudo register names array. (i386_zmmh_names): Add ZMM raw register names array. (i386_k_names): Add K raw register names array. (num_lower_zmm_regs): Add constant for the number of lower ZMM registers. AVX512 has 16 more ZMM registers than there are YMM registers. (i386_zmmh_regnum_p): Add function to look up register number of ZMM raw registers. (i386_zmm_regnum_p): Likewise for ZMM pseudo registers. (i386_k_regnum_p): Likewise for K raw registers. (i386_ymmh_avx512_regnum_p): Likewise for additional YMM raw registers added by AVX512. (i386_ymm_avx512_regnum_p): Likewise for additional YMM pseudo registers added by AVX512. (i386_xmm_avx512_regnum_p): Likewise for additional XMM registers added by AVX512. (i386_register_name): Add code to hide YMMH16-31 and ZMMH0-31. (i386_pseudo_register_name): Add ZMM pseudo registers. (i386_zmm_type): Construct and return vector registers type for ZMM registers. (i386_pseudo_register_type): Return appropriate type for YMM16-31, ZMM0-31 pseudo registers and K registers. (i386_pseudo_register_read_into_value): Add code to read K, ZMM and YMM16-31 registers from register cache. (i386_pseudo_register_write): Add code to write K, ZMM and YMM16-31 registers. (i386_register_reggroup_p): Add code to include/exclude AVX512 registers in/from respective register groups. (i386_validate_tdesc_p): Handle AVX512 feature, add AVX512 registers if feature is present in xcr0. (i386_gdbarch_init): Add code to initialize AVX512 feature variables in tdep structure, wire in pseudo registers and call initialize_tdesc_i386_avx512. * i386-tdep.h (struct gdbarch_tdep): Add AVX512 related variables. (i386_regnum): Add AVX512 registers. (I386_SSE_NUM_REGS): New define for number of SSE registers. (I386_AVX_NUM_REGS): Likewise for AVX registers. (I386_AVX512_NUM_REGS): Likewise for AVX512 registers. (I386_MAX_REGISTER_SIZE): Change to 64 bytes, ZMM registers are 512 bits wide. (i386_xmm_avx512_regnum_p): New prototype for register look up. (i386_ymm_avx512_regnum_p): Likewise. (i386_k_regnum_p): Likewise. (i386_zmm_regnum_p): Likewise. (i386_zmmh_regnum_p): Likewise. * i387-tdep.c : Update year in copyright notice. (xsave_ymm_avx512_offset): New table for YMM16-31 offsets in XSAVE buffer. (XSAVE_YMM_AVX512_ADDR): New macro. (xsave_xmm_avx512_offset): New table for XMM16-31 offsets in XSAVE buffer. (XSAVE_XMM_AVX512_ADDR): New macro. (xsave_avx512_k_offset): New table for K register offsets in XSAVE buffer. (XSAVE_AVX512_K_ADDR): New macro. (xsave_avx512_zmm_h_offset): New table for ZMM register offsets in XSAVE buffer. (XSAVE_AVX512_ZMM_H_ADDR): New macro. (i387_supply_xsave): Add code to supply AVX512 registers to XSAVE buffer. (i387_collect_xsave): Add code to collect AVX512 registers from XSAVE buffer. * i387-tdep.h (I387_NUM_XMM_AVX512_REGS): New define for number of XMM16-31 registers. (I387_NUM_K_REGS): New define for number of K registers. (I387_K0_REGNUM): New define for K0 register number. (I387_NUM_ZMMH_REGS): New define for number of ZMMH registers. (I387_ZMM0H_REGNUM): New define for ZMM0H register number. (I387_NUM_YMM_AVX512_REGS): New define for number of YMM16-31 registers. (I387_YMM16H_REGNUM): New define for YMM16H register number. (I387_XMM16_REGNUM): New define for XMM16 register number. (I387_YMM0_REGNUM): New define for YMM0 register number. (I387_KEND_REGNUM): New define for last K register number. (I387_ZMMENDH_REGNUM): New define for last ZMMH register number. (I387_YMMH_AVX512_END_REGNUM): New define for YMM31 register number. (I387_XMM_AVX512_END_REGNUM): New define for XMM31 register number. * common/i386-xstate.h: Add AVX 3.1 feature bits, mask and XSTATE size. * features/Makefile: Add AVX512 related files. * features/i386/32bit-avx512.xml: New file. * features/i386/64bit-avx512.xml: Likewise. * features/i386/amd64-avx512-linux.c: Likewise. * features/i386/amd64-avx512-linux.xml: Likewise. * features/i386/amd64-avx512.c: Likewise. * features/i386/amd64-avx512.xml: Likewise. * features/i386/i386-avx512-linux.c: Likewise. * features/i386/i386-avx512-linux.xml: Likewise. * features/i386/i386-avx512.c: Likewise. * features/i386/i386-avx512.xml: Likewise. * features/i386/x32-avx512-linux.c: Likewise. * features/i386/x32-avx512-linux.xml: Likewise. * features/i386/x32-avx512.c: Likewise. * features/i386/x32-avx512.xml: Likewise. * regformats/i386/amd64-avx512-linux.dat: New file. * regformats/i386/amd64-avx512.dat: Likewise. * regformats/i386/i386-avx512-linux.dat: Likewise. * regformats/i386/i386-avx512.dat: Likewise. * regformats/i386/x32-avx512-linux.dat: Likewise. * regformats/i386/x32-avx512.dat: Likewise. * NEWS: Add note about new support for AVX512. 2014-04-23 Pedro Alves * breakpoint.c (insert_bp_location): Tolerate errors if the breakpoint is set in a user-loaded objfile. (remove_breakpoint_1): Likewise. Also tolerate errors if the location is marked shlib_disabled. If the breakpoint is set in a user-loaded objfile is a GDB-side memory breakpoint, validate it before uninsertion. (disable_breakpoints_in_freed_objfile): Skip non-OBJF_USERLOADED objfiles. Don't clear the location's inserted flag. * mem-break.c (memory_validate_breakpoint): New function. * objfiles.c (userloaded_objfile_contains_address_p): New function. * objfiles.h (userloaded_objfile_contains_address_p): Declare. * target.h (memory_validate_breakpoint): New declaration. 2014-04-23 Pedro Alves * breakpoint.c (insert_bp_location, remove_breakpoint_1): If the breakpoint is set in a shared library, only suppress errors for software breakpoints, not hardware breakpoints. 2014-04-22 Pedro Alves * infrun.c (schedlock_applies): New function, factored out from find_thread_needs_step_over. (find_thread_needs_step_over): Use it. (switch_back_to_stepped_thread): Always clear trap_expected if the step over is finished. Return early if scheduler locking applies. Look for the stepping thread and a potential step-over thread with a single loop. (currently_stepping_or_nexting_callback): Delete. 2014-04-22 Nick Clifton * NEWS: Mention that ARM sim now supports tracing. 2014-04-22 Yao Qi * tracefile-tfile.c (tfile_fetch_registers): Move the bottom to ... * tracefile.c (tracefile_fetch_registers): ... it. New function. * tracefile.h (tracefile_fetch_registers): Declare. * ctf.c (ctf_fetch_registers): Remove the bottom. Call tracefile_fetch_registers. 2014-04-19 Eli Zaretskii PR gdb/14018 * windows-nat.c (thread_rec): Don't display a warning when SuspendThread fails with ERROR_ACCESS_DENIED. If SuspendThread fails for any reason, set th->suspended to -1, so that we don't try to resume such a thread. Also, don't return NULL in these cases, to avoid completely ruin the session due to "PC register is not available" error. (do_windows_fetch_inferior_registers): Check errors in GetThreadContext call. (windows_continue): Accept an additional argument KILLED; if not zero, ignore errors in the SetThreadContext call, since the inferior was killed and is shutting down. (windows_resume, get_windows_debug_event) (windows_create_inferior, windows_mourn_inferior) (windows_kill_inferior): All callers of windows_continue changed to adjust to its new calling sequence. 2014-04-19 Yao Qi * ctf.c (ctf_open): Call post_create_inferior. 2014-04-19 Yao Qi * ctf.c (handle_id): New static variable. (ctf_open_dir): Get handle_id from bt_context_add_trace return value. Get the declaration of event "register" and get length of field "contents". 2014-04-19 Yao Qi * ctf.c (ctf_xfer_partial): Check 'name' is NULL before strcmp. 2014-04-18 Siva Chandra Reddy * valops.c (oload_method_static): Remove unnecessary argument METHOD. Update all callers. 2014-04-18 Pedro alves Tom Tromey PR backtrace/15558 * frame.c (get_prev_frame_1): Rename to ... (get_prev_frame_always): ... this, and make extern. Adjust. (skip_artificial_frames): Use get_prev_frame_always. (frame_unwind_caller_id, frame_pop, get_prev_frame) (get_frame_unwind_stop_reason): Adjust to rename. * frame.h (get_prev_frame_always): Declare. * inline-frame.c: Include frame.h. (inline_frame_this_id): Use get_prev_frame_always. 2014-04-18 Tristan Gingold * solib-darwin.c (darwin_solib_create_inferior_hook): Simplify code by using bfd_mach_o_get_base_address. 2014-04-17 Ulrich Weigand  * spu-tdep.c: Include "dwarf2-frame.h" and "ax.h". (spu_ax_pseudo_register_collect): New function. (spu_ax_pseudo_register_push_stack): Likewise. (spu_dwarf_reg_to_regnum): Likewise. (spu_gdbarch_init): Install them. Append DWARF unwinders. 2014-04-17 Ulrich Weigand  * gdbarch.sh (value_from_register): Make class "m" instead of "f". Replace FRAME argument with FRAME_ID. * gdbarch.c, gdbarch.h: Regenerate. * findvar.c (default_value_from_register): Add GDBARCH argument; replace FRAME by FRAME_ID. No longer call get_frame_id. (value_from_register): Update call to gdbarch_value_from_register. * value.h (default_value_from_register): Update prototype. * s390-linux-tdep.c (s390_value_from_register): Update interface and call to default_value_from_register. * spu-tdep.c (spu_value_from_register): Likewise. * findvar.c (address_from_register): Remove TYPE argument. Do not call value_from_register; use gdbarch_value_from_register with null_frame_id instead. * value.h (address_from_register): Update prototype. * dwarf2-frame.c (read_addr_from_reg): Use address_from_register. * dwarf2loc.c (dwarf_expr_read_addr_from_reg): Update for address_from_register interface change. 2014-04-17 Yao Qi * gdbtypes.h: Update comments to link to types and macros' definitions. 2014-04-16 Siva Chandra Reddy * gdbtypes.h: Remove definition of the macro TYPE_FN_FIELDS. 2014-04-16 Keith Seitz PR gdb/15827 * dwarf2read.c (skip_one_die): Check that all relative-offset sibling DIEs fall within range of the current reader's buffer. (read_partial_die): Likewise. 2014-04-16 Keith Seitz PR c++/16597 * cp-namespace.c (lookup_symbol_file): If the type name of `this' is NULL, return immediately. 2014-04-14 Keith Seitz PR c++/16253 * ada-lang.c (ada_symbol_matches_domain): Moved here and renamed from symbol_matches_domain in symtab.c. All local callers of symbol_matches_domain updated. (standard_lookup): If DOMAIN is VAR_DOMAIN and no symbol is found, search STRUCT_DOMAIN. (ada_find_any_type_symbol): Do not search STRUCT_DOMAIN independently. standard_lookup will do that automatically. * cp-namespace.c (cp_lookup_symbol_nonlocal): Explain when/why VAR_DOMAIN searches may return a STRUCT_DOMAIN match. (cp_lookup_symbol_in_namespace): Likewise. If no VAR_DOMAIN symbol is found, search STRUCT_DOMAIN. (cp_lookup_symbol_exports): Explain when/why VAR_DOMAIN searches may return a STRUCT_DOMAIN match. (lookup_symbol_file): Search for the class name in STRUCT_DOMAIN. * cp-support.c: Include language.h. (inspect_type): Explicitly search STRUCT_DOMAIN before searching VAR_DOMAIN. * psymtab.c (match_partial_symbol): Compare the requested domain with the symbol's domain directly. (lookup_partial_symbol): Likewise. * symtab.c (lookup_symbol_in_language): Explain when/why VAR_DOMAIN searches may return a STRUCT_DOMAIN match. If no VAR_DOMAIN symbol is found, search STRUCT_DOMAIN for appropriate languages. (symbol_matches_domain): Renamed `ada_symbol_matches_domain' and moved to ada-lang.c (lookup_block_symbol): Explain that this function only returns symbol matching the requested DOMAIN. Compare the requested domain with the symbol's domain directly. (iterate_over_symbols): Compare the requested domain with the symbol's domain directly. * symtab.h (symbol_matches_domain): Remove. 2014-04-14 Tom Tromey PR c++/15246: * c-exp.y (type_aggregate_p): New function. (qualified_name, classify_inner_name): Use it. * c-typeprint.c (c_type_print_base): Handle TYPE_DECLARED_CLASS and TYPE_TARGET_TYPE of an enum type. * dwarf2read.c (read_enumeration_type): Set TYPE_DECLARED_CLASS on an enum type. (determine_prefix) : New case; handle TYPE_DECLARED_CLASS. * gdbtypes.c (rank_one_type): Handle TYPE_DECLARED_CLASS on enum types. * gdbtypes.h (TYPE_DECLARED_CLASS): Update comment. * valops.c (enum_constant_from_type): New function. (value_aggregate_elt): Use it. * cp-namespace.c (cp_lookup_nested_symbol): Handle TYPE_CODE_ENUM. 2014-04-14 Tom Tromey * valops.c (value_aggregate_elt, value_struct_elt_for_reference) (value_namespace_elt, value_maybe_namespace_elt): Make "name" const. * value.h (value_aggregate_elt): Update. 2014-04-14 Tom Tromey * dwarf2read.c (read_enumeration_type): Handle DW_AT_type. 2014-04-14 Sanimir Agovic * eval.c (evaluate_subexp_for_sizeof): Add enum noside argument. (evaluate_subexp_standard): Pass noside argument. (evaluate_subexp_for_sizeof) : Handle subscript case if noside equals EVAL_NORMAL. If the subscript yields a vla type re-evaluate subscript operation with EVAL_NORMAL to enable sideffects. * gdbtypes.c (resolve_dynamic_bounds): Mark bound as evaluated. * gdbtypes.h (enum range_flags): Add RANGE_EVALUATED case. 2014-04-14 Sanimir Agovic * findvar.c (default_read_var_value): Resolve dynamic bounds if location points to a constant blob. 2014-04-14 Sanimir Agovic * dwarf2read.c (read_subrange_type): Convert DW_AT_count to a dynamic property and store it as the high bound and flag the range accordingly. * gdbtypes.c (resolve_dynamic_bounds): If range is flagged as RANGE_UPPER_BOUND_IS_COUNT assign low + high - 1 as the new high bound. * gdbtypes.h (enum range_flags): New enum. (struct range_bounds): Add flags member. 2014-04-14 Sanimir Agovic * c-typeprint.c (c_type_print_varspec_suffix): Added check for not yet resolved high bound. If unresolved, print "variable length" string to the console instead of random length. 2014-04-14 Sanimir Agovic * ada-lang.c (ada_value_primitive_packed_val): Re-fetch type from value. (ada_template_to_fixed_record_type_1): Likewise. (ada_to_fixed_type_1): Likewise. * cp-valprint.c (cp_print_value_fields_rtti): Likewise. (cp_print_value): Likewise. * d-valprint.c (dynamic_array_type): Likewise. * findvar.c (address_of_variable): Likewise. * jv-valprint.c (java_value_print): Likewise. * valops.c (value_ind): Likewise. * value.c (coerce_ref): Likewise. 2014-04-14 Sanimir Agovic * eval.c (evaluate_subexp_for_sizeof) : Create an indirect value and retrieve the dynamic type size. 2014-04-14 Sanimir Agovic * eval.c (evaluate_subexp_for_sizeof) : If the type passed to sizeof is dynamic evaluate the argument to compute the length. 2014-04-14 Sanimir Agovic Joel Brobecker * dwarf2loc.c (dwarf2_locexpr_baton_eval): New function. (dwarf2_evaluate_property): New function. * dwarf2loc.h (dwarf2_evaluate_property): New function prototype. * dwarf2read.c (attr_to_dynamic_prop): New function. (read_subrange_type): Use attr_to_dynamic_prop to read high bound attribute. * gdbtypes.c: Include dwarf2loc.h. (is_dynamic_type): New function. (resolve_dynamic_type): New function. (resolve_dynamic_bounds): New function. (get_type_length): New function. (check_typedef): Use get_type_length to compute type length. * gdbtypes.h (TYPE_HIGH_BOUND_KIND): New macro. (TYPE_LOW_BOUND_KIND): New macro. (is_dynamic_type): New function prototype. * value.c (value_from_contents_and_address): Call resolve_dynamic_type to resolve dynamic properties of the type. Update comment. * valops.c (get_value_at, value_at, value_at_lazy): Update comment. 2014-04-14 Richard Henderson * alpha-linux-nat.c (_initialize_alpha_linux_nat): Fix prototype. 2014-04-12 Siva Chandra Reddy Doug Evans * guile/scm-value.c (gdbscm_value_dynamic_type): Use coerce_ref to dereference TYPE_CODE_REF values. 2014-04-11 Joel Brobecker Revert the following changes due to regressions: * dwarf2loc.c (dwarf2_locexpr_baton_eval): New function. (dwarf2_evaluate_property): New function. * dwarf2loc.h (dwarf2_evaluate_property): New function prototype. * dwarf2read.c (attr_to_dynamic_prop): New function. (read_subrange_type): Use attr_to_dynamic_prop to read high bound attribute. * gdbtypes.c: Include dwarf2loc.h. (is_dynamic_type): New function. (resolve_dynamic_type): New function. (resolve_dynamic_bounds): New function. (get_type_length): New function. (check_typedef): Use get_type_length to compute type length. * gdbtypes.h (TYPE_HIGH_BOUND_KIND): New macro. (TYPE_LOW_BOUND_KIND): New macro. (is_dynamic_type): New function prototype. * value.c (value_from_contents_and_address): Call resolve_dynamic_type to resolve dynamic properties of the type. Update comment. * valops.c (get_value_at, value_at, value_at_lazy): Update comment. * eval.c (evaluate_subexp_for_sizeof) : If the type passed to sizeof is dynamic evaluate the argument to compute the length. * eval.c (evaluate_subexp_for_sizeof) : Create an indirect value and retrieve the dynamic type size. * ada-lang.c (ada_value_primitive_packed_val): Re-fetch type from value. (ada_template_to_fixed_record_type_1): Likewise. (ada_to_fixed_type_1): Likewise. * cp-valprint.c (cp_print_value_fields_rtti): Likewise. (cp_print_value): Likewise. * d-valprint.c (dynamic_array_type): Likewise. * eval.c (evaluate_subexp_with_coercion): Likewise. * findvar.c (address_of_variable): Likewise. * jv-valprint.c (java_value_print): Likewise. * valops.c (value_ind): Likewise. * value.c (coerce_ref): Likewise. * c-typeprint.c (c_type_print_varspec_suffix): Added check for not yet resolved high bound. If unresolved, print "variable length" string to the console instead of random length. * dwarf2read.c (read_subrange_type): Convert DW_AT_count to a dynamic property and store it as the high bound and flag the range accordingly. * gdbtypes.c (resolve_dynamic_bounds): If range is flagged as RANGE_UPPER_BOUND_IS_COUNT assign low + high - 1 as the new high bound. * gdbtypes.h (enum range_flags): New enum. (struct range_bounds): Add flags member. * findvar.c (default_read_var_value): Resolve dynamic bounds if location points to a constant blob. * eval.c (evaluate_subexp_for_sizeof): Add enum noside argument. (evaluate_subexp_standard): Pass noside argument. (evaluate_subexp_for_sizeof) : Handle subscript case if noside equals EVAL_NORMAL. If the subscript yields a vla type re-evaluate subscript operation with EVAL_NORMAL to enable sideffects. * gdbtypes.c (resolve_dynamic_bounds): Mark bound as evaluated. * gdbtypes.h (enum range_flags): Add RANGE_EVALUATED case. 2014-04-11 Keith Seitz PR c++/16675 * c-exp.y (exp : SIZEOF '(' type ')'): Handle reference types. * eval.c (evaluate_subexp_for_sizeof): Refactor and handle reference types. 2014-04-11 Sanimir Agovic * eval.c (evaluate_subexp_for_sizeof): Add enum noside argument. (evaluate_subexp_standard): Pass noside argument. (evaluate_subexp_for_sizeof) : Handle subscript case if noside equals EVAL_NORMAL. If the subscript yields a vla type re-evaluate subscript operation with EVAL_NORMAL to enable sideffects. * gdbtypes.c (resolve_dynamic_bounds): Mark bound as evaluated. * gdbtypes.h (enum range_flags): Add RANGE_EVALUATED case. 2014-04-11 Sanimir Agovic * findvar.c (default_read_var_value): Resolve dynamic bounds if location points to a constant blob. 2014-04-11 Sanimir Agovic * dwarf2read.c (read_subrange_type): Convert DW_AT_count to a dynamic property and store it as the high bound and flag the range accordingly. * gdbtypes.c (resolve_dynamic_bounds): If range is flagged as RANGE_UPPER_BOUND_IS_COUNT assign low + high - 1 as the new high bound. * gdbtypes.h (enum range_flags): New enum. (struct range_bounds): Add flags member. 2014-04-11 Sanimir Agovic * c-typeprint.c (c_type_print_varspec_suffix): Added check for not yet resolved high bound. If unresolved, print "variable length" string to the console instead of random length. 2014-04-11 Sanimir Agovic * ada-lang.c (ada_value_primitive_packed_val): Re-fetch type from value. (ada_template_to_fixed_record_type_1): Likewise. (ada_to_fixed_type_1): Likewise. * cp-valprint.c (cp_print_value_fields_rtti): Likewise. (cp_print_value): Likewise. * d-valprint.c (dynamic_array_type): Likewise. * eval.c (evaluate_subexp_with_coercion): Likewise. * findvar.c (address_of_variable): Likewise. * jv-valprint.c (java_value_print): Likewise. * valops.c (value_ind): Likewise. * value.c (coerce_ref): Likewise. 2014-04-11 Sanimir Agovic * eval.c (evaluate_subexp_for_sizeof) : Create an indirect value and retrieve the dynamic type size. 2014-04-11 Sanimir Agovic * eval.c (evaluate_subexp_for_sizeof) : If the type passed to sizeof is dynamic evaluate the argument to compute the length. 2014-04-11 Sanimir Agovic * dwarf2loc.c (dwarf2_locexpr_baton_eval): New function. (dwarf2_evaluate_property): New function. * dwarf2loc.h (dwarf2_evaluate_property): New function prototype. * dwarf2read.c (attr_to_dynamic_prop): New function. (read_subrange_type): Use attr_to_dynamic_prop to read high bound attribute. * gdbtypes.c: Include dwarf2loc.h. (is_dynamic_type): New function. (resolve_dynamic_type): New function. (resolve_dynamic_bounds): New function. (get_type_length): New function. (check_typedef): Use get_type_length to compute type length. * gdbtypes.h (TYPE_HIGH_BOUND_KIND): New macro. (TYPE_LOW_BOUND_KIND): New macro. (is_dynamic_type): New function prototype. * value.c (value_from_contents_and_address): Call resolve_dynamic_type to resolve dynamic properties of the type. Update comment. * valops.c (get_value_at, value_at, value_at_lazy): Update comment. 2014-04-11 Sanimir Agovic * dwarf2read.c (read_subrange_type): Use struct bound_prop for declaring high/low bounds and change uses accordingly. Call create_range_type instead of create_static_range_type. * gdbtypes.c (create_range_type): New function. (create_range_type): Convert bounds into struct bound_prop and pass them to create_range_type. * gdbtypes.h (struct bound_prop): New struct. (create_range_type): New function prototype. (struct range_bounds): Use struct bound_prop instead of LONGEST for high/low bounds. Remove low_undefined/high_undefined and adapt all uses. (TYPE_LOW_BOUND,TYPE_HIGH_BOUND): Adapt macros to refer to the static part of the bound. * parse.c (follow_types): Set high bound kind to BOUND_UNDEFINED. 2014-04-11 Sanimir Agovic * gdbtypes.c (create_static_range_type): Renamed from create_range_type. * gdbtypes.h (create_static_range_type): Renamed from create_range_type. * ada-lang.c: All uses of create_range_type updated. * coffread.c: All uses of create_range_type updated. * dwarf2read.c: All uses of create_range_type updated. * f-exp.y: All uses of create_range_type updated. * m2-valprint.c: All uses of create_range_type updated. * mdebugread.c: All uses of create_range_type updated. * stabsread.c: All uses of create_range_type updated. * valops.c: All uses of create_range_type updated. * valprint.c: All uses of create_range_type updated. 2014-04-10 Pedro Alves * breakpoint.c (single_step_breakpoints) (single_step_gdbarch): Move up in the file. (one_breakpoint_xfer_memory): New function, factored out from ... (breakpoint_xfer_memory): ... here. Also process single-step breakpoints. 2014-04-09 Tristan Gingold * darwin-nat.c (darwin_check_new_threads): Fix port leak, add comments. (darwin_decode_exception_message): Free port only after use. 2014-04-08 Pierre Langlois * avr-tdep.c (struct gdbarch_tdep): Mention avrxmega in the comment. (avr_gdbarch_init): Add xmega architectures given by bfd_architecture when setting the size of call_length. 2014-04-07 Siva Chandra Reddy * python/py-value.c (valpy_get_dynamic_type): Use coerce_ref to dereference TYPE_CODE_REF values. 2014-04-07 Joel Brobecker * darwin-nat.c (darwin_decode_message): Remove trailing '\n' at end of warning message. 2014-04-03 Doug Evans * dwarf2read.c (read_cutu_die_from_dwo): Fix assertion, at most one of stub_comp_unit_die, stub_comp_dir is non-NULL. 2014-04-02 Alan Modra * symfile-mem.c (symbol_file_add_from_memory): Add size parameter. Pass to bfd_elf_bfd_from_remote_memory. Adjust all callers. (struct symbol_file_add_from_memory_args): Add size field. (find_vdso_size): New function. (add_vsyscall_page): Attempt to find vdso size. 2014-04-01 Doug Evans * dwarf2read.c (read_cutu_die_from_dwo): Improve comment. 2014-04-01 Tristan Gingold * darwin-nat.c (darwin_encode_reply): Add prototype. (darwin_decode_exception_message): Reply to unknown inferiors. (darwin_decode_message): Handle message by id. Ignore message to unknown inferior. (darwin_wait): Discard unknown messages, add debug trace. 2014-03-31 Doug Evans * dwarf2read.c (read_cutu_die_from_dwo): Delete unused local comp_dir_string. 2014-03-31 Doug Evans New option "set print symbol-loading". * NEWS: Mention it. * solib.c (solib_read_symbols): Only print symbol loading messages if requested. (solib_add): If symbol loading is in "brief" mode, notify user symbols are being loaded. (reload_shared_libraries_1): Ditto. * symfile.c (print_symbol_loading_off): New static global. (print_symbol_loading_brief): New static global. (print_symbol_loading_full): New static global. (print_symbol_loading_enums): New static global. (print_symbol_loading): New static global. (print_symbol_loading_p): New function. (symbol_file_add_with_addrs): Only print symbol loading messages if requested. (_initialize_symfile): Register "print symbol-loading" set/show command. * symfile.h (print_symbol_loading_p): Declare. 2014-03-30 Doug Evans * infrun.c (set_last_target_status): New function. (handle_inferior_event): Call it. 2014-03-30 Doug Evans * inferior.h (enum stop_kind): Improve comment. 2014-03-28 Joel Brobecker * varobj.c (varobj_value_has_mutated): If NEW_VALUE is a reference, strip the reference layer before calling the lang_ops value_has_mutated callback. 2014-03-27 Sergio Durigan Junior Remove some globals from our parser. * language.c (unk_lang_parser): Add "struct parser_state" argument. * language.h (struct language_defn) : Likewise. * parse.c (expout, expout_size, expout_ptr): Remove variables. (initialize_expout): Add "struct parser_state" argument. Rewrite function to use the parser state. (reallocate_expout, write_exp_elt, write_exp_elt_opcode, write_exp_elt_sym, write_exp_elt_block, write_exp_elt_objfile, write_exp_elt_longcst, write_exp_elt_dblcst, write_exp_elt_decfloatcst, write_exp_elt_type, write_exp_elt_intern, write_exp_string, write_exp_string_vector, write_exp_bitstring, write_exp_msymbol, mark_struct_expression, write_dollar_variable): Likewise. (parse_exp_in_context_1): Use parser state. (insert_type_address_space): Add "struct parser_state" argument. Use parser state. (increase_expout_size): New function. * parser-defs.h: Forward declare "struct language_defn" and "struct parser_state". (expout, expout_size, expout_ptr): Remove extern declarations. (parse_gdbarch, parse_language): Rewrite macro declarations to accept the parser state. (struct parser_state): New struct. (initialize_expout, reallocate_expout, write_exp_elt_opcode, write_exp_elt_sym, write_exp_elt_longcst, write_exp_elt_dblcst, write_exp_elt_decfloatcst, write_exp_elt_type, write_exp_elt_intern, write_exp_string, write_exp_string_vector, write_exp_bitstring, write_exp_elt_block, write_exp_elt_objfile, write_exp_msymbol, write_dollar_variable, mark_struct_expression, insert_type_address_space): Add "struct parser_state" argument. (increase_expout_size): New function. * utils.c (do_clear_parser_state): New function. (make_cleanup_clear_parser_state): Likewise. * utils.h (make_cleanup_clear_parser_state): New function prototype. * aarch64-linux-tdep.c (aarch64_stap_parse_special_token): Update calls to write_exp* in order to pass the parser state. * arm-linux-tdep.c (arm_stap_parse_special_token): Likewise. * i386-tdep.c (i386_stap_parse_special_token_triplet): Likewise. (i386_stap_parse_special_token_three_arg_disp): Likewise. * ppc-linux-tdep.c (ppc_stap_parse_special_token): Likewise. * stap-probe.c (stap_parse_register_operand): Likewise. (stap_parse_single_operand): Likewise. (stap_parse_argument_1): Likewise. (stap_parse_argument): Use parser state. * stap-probe.h: Include "parser-defs.h". (struct stap_parse_info) : New field. * c-exp.y (parse_type): Rewrite to use parser state. (yyparse): Redefine to c_parse_internal. (pstate): New global variable. (parse_number): Add "struct parser_state" argument. (write_destructor_name): Likewise. (type_exp): Update calls to write_exp* and similars in order to use parser state. (exp1, exp, variable, qualified_name, space_identifier, typename, typebase): Likewise. (write_destructor_name, parse_number, lex_one_token, classify_name, classify_inner_name, c_parse): Add "struct parser_state" argument. Update function to use parser state. * c-lang.h: Forward declare "struct parser_state". (c_parse): Add "struct parser_state" argument. * ada-exp.y (parse_type): Rewrite macro to use parser state. (yyparse): Redefine macro to ada_parse_internal. (pstate): New variable. (write_int, write_object_renaming, write_var_or_type, write_name_assoc, write_exp_op_with_string, write_ambiguous_var, type_int, type_long, type_long_long, type_float, type_double, type_long_double, type_char, type_boolean, type_system_address): Add "struct parser_state" argument. (exp1, primary, simple_exp, relation, and_exp, and_then_exp, or_exp, or_else_exp, xor_exp, type_prefix, opt_type_prefix, var_or_type, aggregate, aggregate_component_list, positional_list, others, component_group, component_associations): Update calls to write_exp* and similar functions in order to use parser state. (ada_parse, write_var_from_sym, write_int, write_exp_op_with_string, write_object_renaming, find_primitive_type, write_selectors, write_ambiguous_var, write_var_or_type, write_name_assoc, type_int, type_long, type_long_long, type_float, type_double, type_long_double, type_char, type_boolean, type_system_address): Add "struct parser_state" argument. Adjust function to use parser state. * ada-lang.c (parse): Likewise. * ada-lang.h: Forward declare "struct parser_state". (ada_parse): Add "struct parser_state" argument. * ada-lex.l (processInt, processReal): Likewise. Adjust all calls to both functions. * f-exp.y (parse_type, parse_f_type): Rewrite macros to use parser state. (yyparse): Redefine macro to f_parse_internal. (pstate): New variable. (parse_number): Add "struct parser_state" argument. (type_exp, exp, subrange, typebase): Update calls to write_exp* and similars in order to use parser state. (parse_number): Adjust code to use parser state. (yylex): Likewise. (f_parse): New function. * f-lang.h: Forward declare "struct parser_state". (f_parse): Add "struct parser_state" argument. * jv-exp.y (parse_type, parse_java_type): Rewrite macros to use parser state. (yyparse): Redefine macro for java_parse_internal. (pstate): New variable. (push_expression_name, push_expression_name, insert_exp): Add "struct parser_state" argument. (type_exp, StringLiteral, Literal, PrimitiveType, IntegralType, FloatingPointType, exp1, PrimaryNoNewArray, FieldAccess, FuncStart, MethodInvocation, ArrayAccess, PostfixExpression, PostIncrementExpression, PostDecrementExpression, UnaryExpression, PreIncrementExpression, PreDecrementExpression, UnaryExpressionNotPlusMinus, CastExpression, MultiplicativeExpression, AdditiveExpression, ShiftExpression, RelationalExpression, EqualityExpression, AndExpression, ExclusiveOrExpression, InclusiveOrExpression, ConditionalAndExpression, ConditionalOrExpression, ConditionalExpression, Assignment, LeftHandSide): Update calls to write_exp* and similars in order to use parser state. (parse_number): Ajust code to use parser state. (yylex): Likewise. (java_parse): New function. (push_variable): Add "struct parser_state" argument. Adjust code to user parser state. (push_fieldnames, push_qualified_expression_name, push_expression_name, insert_exp): Likewise. * jv-lang.h: Forward declare "struct parser_state". (java_parse): Add "struct parser_state" argument. * m2-exp.y (parse_type, parse_m2_type): Rewrite macros to use parser state. (yyparse): Redefine macro to m2_parse_internal. (pstate): New variable. (type_exp, exp, fblock, variable, type): Update calls to write_exp* and similars to use parser state. (yylex): Likewise. (m2_parse): New function. * m2-lang.h: Forward declare "struct parser_state". (m2_parse): Add "struct parser_state" argument. * objc-lang.c (end_msglist): Add "struct parser_state" argument. * objc-lang.h: Forward declare "struct parser_state". (end_msglist): Add "struct parser_state" argument. * p-exp.y (parse_type): Rewrite macro to use parser state. (yyparse): Redefine macro to pascal_parse_internal. (pstate): New variable. (parse_number): Add "struct parser_state" argument. (type_exp, exp1, exp, qualified_name, variable): Update calls to write_exp* and similars in order to use parser state. (parse_number, yylex): Adjust code to use parser state. (pascal_parse): New function. * p-lang.h: Forward declare "struct parser_state". (pascal_parse): Add "struct parser_state" argument. * go-exp.y (parse_type): Rewrite macro to use parser state. (yyparse): Redefine macro to go_parse_internal. (pstate): New variable. (parse_number): Add "struct parser_state" argument. (type_exp, exp1, exp, variable, type): Update calls to write_exp* and similars in order to use parser state. (parse_number, lex_one_token, classify_name, yylex): Adjust code to use parser state. (go_parse): Likewise. * go-lang.h: Forward declare "struct parser_state". (go_parse): Add "struct parser_state" argument. 2014-03-27 Doug Evans * dwarf2read.c (read_str_index): Delete arg cu. All callers updated. 2014-03-27 Doug Evans * dwarf2read.c (init_cutu_and_read_dies_no_follow): Fix comments. Remove argument abbrev_section. All callers updated. 2014-03-27 Doug Evans * dwarf2read.c (struct dwarf2_cu): Improve comments for members addr_base, ranges_base. 2014-03-26 Keith Seitz * ada-tasks.c (get_tcb_types_info): Search STRUCT_DOMAIN for types, not VAR_DOMAIN. 2014-03-25 Sandra Loosemore * features/nios2-cpu.xml: Correct types of "gp", "fp", "ea", and "ra" registers. * features/nios2-linux.c: Regenerated. * features/nios2.c: Regenerated. 2014-03-25 Pedro Alves * cli/cli-script.c (script_from_file): Force the interpreter to sync mode. 2014-03-24 Pierre Langlois * avr-tdep.c (avr_scan_prologue): Accept push r1 instruction for small stack allocation. 2014-03-24 Tristan Gingold * darwin-nat.c (exc_server): Remove unused prototype. (darwin_dump_message): Correctly display data on x86_64. (darwin_encode_reply): Fix style. Add comments and fix indentation. 2014-03-24 Pierre Langlois * MAINTAINERS (Write After Approval): Add "Pierre Langlois". 2014-03-22 Doug Evans * infcmd.c: Whitespace fixes. (interrupt_command): Merge two function comments into one. 2014-03-22 Doug Evans * infcmd.c (interrupt_command): Renamed from interrupt_target_command. All uses updated. 2014-03-22 Yao Qi * remote.c (target_read_live_memory): Remove. (memory_xfer_live_readonly_partial): Rename it to remote_xfer_live_readonly_partial. Remove argument 'object'. All callers updated. Call remote_read_bytes_1 instead of target_read_live_memory. * tracepoint.c (set_traceframe_number): Remove. (make_cleanup_restore_traceframe_number): Likewise . * tracepoint.h (set_traceframe_number): Remove declaration. (make_cleanup_restore_traceframe_number): Likewise. 2014-03-22 Yao Qi * remote.c (remote_read_bytes): Move code on reading from the remote stub to ... (remote_read_bytes_1): ... here. New function. 2014-03-22 Yao Qi * ctf.c (ctf_xfer_partial): Check the return value of exec_read_partial_read_only, if it is not TARGET_XFER_OK, return TARGET_XFER_UNAVAILABLE. * tracefile-tfile.c (tfile_xfer_partial): Likewise. * target.c (target_read_live_memory): Move it to remote.c. (memory_xfer_live_readonly_partial): Likewise. (memory_xfer_partial_1): Move some code to remote_read_bytes. * remote.c (target_read_live_memory): Moved from target.c. (memory_xfer_live_readonly_partial): Likewise. (remote_read_bytes): Factored out from memory_xfer_partial_1. 2014-03-21 Daniel Gutson * extension.c (eval_ext_lang_from_control_command): Avoid dereferencing NULL pointer. 2014-03-21 Pedro Alves * infrun.c (normal_stop): Extend comment. 2014-03-21 Hui Zhu Pedro Alves * darwin-nat.c (darwin_pid_to_exec_file): Change xmalloc to static buffer. * fbsd-nat.c (fbsd_pid_to_exec_file): Ditto. * linux-nat.c (linux_child_pid_to_exec_file): Ditto. * nbsd-nat.c (nbsd_pid_to_exec_file): Ditto. 2014-03-20 Maciej W. Rozycki * mi/mi-interp.c (mi_memory_changed): Avoid using the ISO C99 `z' formatted output modifier. 2014-03-20 Tom Tromey Sergio Durigan Junior * probe.c (parse_probes): Turn assert into an ordinary error. * break-catch-throw.c (re_set_exception_catchpoint): Ignore exceptions when parsing probes. Rearrange the code for clarity. 2014-03-20 Tom Tromey PR gdb/14135 * top.c (execute_command): Only dispatch events if the command started the target. 2014-03-20 Tom Tromey PR cli/15718 * infcall.c: Include event-top.h. (run_inferior_call): Call async_disable_stdin if needed. 2014-03-20 Pedro Alves * infrun.c (prepare_to_proceed): Delete. (thread_still_needs_step_over): New function. (find_thread_needs_step_over): New function. (proceed): If the current thread needs a step-over, set its steping_over_breakpoint flag. Adjust to use find_thread_needs_step_over instead of prepare_to_proceed. (process_event_stop_test): For BPSTAT_WHAT_STOP_NOISY and BPSTAT_WHAT_STOP_SILENT, assume the thread stopped for a breakpoint. (switch_back_to_stepped_thread): Step over breakpoints of all threads not the stepping thread, before switching back to the stepping thread. 2014-03-20 Pedro Alves * breakpoint.c (single_step_breakpoint_inserted_here_p): Make extern. * breakpoint.h (single_step_breakpoint_inserted_here_p): Declare. * infrun.c (saved_singlestep_ptid) (stepping_past_singlestep_breakpoint): Delete. (resume): Remove stepping_past_singlestep_breakpoint handling. (proceed): Store the prev_pc of the stepping thread too. (init_wait_for_inferior): Adjust. Clear singlestep_ptid and singlestep_pc. (enum infwait_states): Delete infwait_thread_hop_state. (struct execution_control_state) : New field. (handle_inferior_event): Adjust. (handle_signal_stop): Delete stepping_past_singlestep_breakpoint handling and the thread-hop code. Before removing single-step breakpoints, check whether the thread hit a single-step breakpoint of another thread. If it did, the trap is not a random signal. (switch_back_to_stepped_thread): If the event thread hit a single-step breakpoint, unblock it before switching to the stepping thread. Handle the case of the stepped thread having advanced already. (keep_going): Handle the case of the current thread moving past a single-step breakpoint. 2014-03-20 Pedro Alves PR breakpoints/7143 * breakpoint.c (should_be_inserted): Don't insert breakpoints that are being stepped over. (breakpoint_address_match): Make extern. * breakpoint.h (breakpoint_address_match): New declaration. * inferior.h (stepping_past_instruction_at): New declaration. * infrun.c (struct step_over_info): New type. (step_over_info): New global. (set_step_over_info, clear_step_over_info) (stepping_past_instruction_at): New functions. (handle_inferior_event): Clear the step-over info when trap_expected is cleared. (resume): Remove now stale comment. (clear_proceed_status): Clear step-over info. (proceed): Adjust step-over handling to set or clear the step-over info instead of removing all breakpoints. (handle_signal_stop): When setting up a thread-hop, don't remove breakpoints here. (stop_stepping): Clear step-over info. (keep_going): Adjust step-over handling to set or clear step-over info and then always inserting breakpoints, instead of removing all breakpoints when stepping over one. 2014-03-20 Pedro Alves * infrun.c (previous_inferior_ptid): Adjust comment. (deferred_step_ptid): Delete. (infrun_thread_ptid_changed, prepare_to_proceed) (init_wait_for_inferior): Adjust. (handle_signal_stop): Delete deferred_step_ptid handling. 2014-03-18 Jan Kratochvil PR gdb/15358 * defs.h (sync_quit_force_run): New declaration. (QUIT): Check also SYNC_QUIT_FORCE_RUN. * event-top.c (async_sigterm_handler): New declaration. (async_sigterm_token): New variable. (async_init_signals): Create also async_sigterm_token. (async_sigterm_handler): New function. (sync_quit_force_run): New variable. (handle_sigterm): Replace quit_force call by other calls. * utils.c (quit): Call quit_force if SYNC_QUIT_FORCE_RUN. 2014-03-18 Maciej W. Rozycki * rs6000-tdep.c (rs6000_frame_cache): Correct little-endian GPR offset into SPE pseudo registers. 2014-03-18 Pedro Alves PR gdb/13860 * inferior.h (print_stop_event): Declare. * infrun.c (print_stop_event): New, factored out from ... (normal_stop): ... this. * mi/mi-interp.c (mi_on_normal_stop): Use print_stop_event instead of bpstat_print/print_stack_frame. 2014-03-17 Tom Tromey * ui-out.c (clear_table, ui_out_new): Clear uiout->table.id. 2014-03-17 Pierre-Marie de Rodat * ada-lang.c (decode_constrained_packed_array): Perform a minimal coercion for reference with coerce_ref instead of ada_coerce_ref. 2014-03-17 Tristan Gingold * solib-darwin.c (DYLD_VERSION_MAX): Increase value. (darwin_solib_create_inferior_hook): Emit a warning if version is unhandled. 2014-03-16 Ulrich Weigand  * python/py-value.c (get_field_flag): Cast flag_name argument to PyObject_GetAttrString to support Python 2.4. 2014-03-14 Jan Kratochvil * MAINTAINERS (The Official FSF-appointed GDB Maintainers) (Global Maintainers): Remove Jan Kratochvil. 2014-03-14 Pedro Alves * inferior.h (terminal_ours_for_output): Rename to ... (child_terminal_ours_for_output): ... this. (terminal_save_ours): Rename to ... (child_terminal_save_ours): ... this. (terminal_ours): Rename to ... (child_terminal_ours): ... this. (terminal_inferior): Rename to ... (child_terminal_inferior): ... this. (terminal_init_inferior): Rename to ... (child_terminal_init_inferior): ... this. (terminal_init_inferior_with_pgrp): Rename to ... (child_terminal_init_inferior_with_pgrp): ... this. * inflow.c (terminal_init_inferior_with_pgrp): Rename to ... (child_terminal_init_with_pgrp): ... this. (terminal_save_ours): Rename to ... (child_terminal_save_ours): ... this. (terminal_init_inferior): Rename to ... (child_terminal_init): ... this. Adjust. (terminal_inferior): Rename to ... (child_terminal_inferior): ... this. (terminal_ours_for_output): Rename to ... (child_terminal_ours_for_output): ... this. Adjust. (terminal_ours): Rename to ... (child_terminal_ours): ... this. (terminal_ours_1): Rename to ... (child_terminal_ours_1): ... this. Adjust. * linux-nat.c (linux_nat_terminal_inferior): Adjust. * windows-nat.c (do_initial_windows_stuff): Adjust. * gnu-nat.c (gnu_terminal_init_inferior): Rename to ... (gnu_terminal_init): ... this. Adjust. (gnu_target): Adjust. * inf-child.c (inf_child_target): Adjust. 2014-03-13 Doug Evans PR guile/16612 * guile/scm-type.c (tyscm_copy_type_recursive): Move type to its new eq?-hashtab. 2014-03-13 Doug Evans * value.c (record_latest_value): Call release_value_or_incref instead of release_value. 2014-03-13 Pedro Alves * procfs.c (procfs_target): Don't override to_shortname, to_longname or to_doc. 2014-03-13 Pedro Alves * inf-child.c (inf_child_open, inf_child_target): Don't mention Unix in user visible strings. 2014-03-12 Stan Shebs * gdbtypes.h: Annotate comments for Doxygen, add a page block comment with some general info. 2014-03-12 Pedro Alves * infcmd.c (prepare_execution_command): New function, factored out from several execution commands. (run_command_1, continue_command, step_1, jump_command) (signal_command, until_command, advance_command, finish_command) (attach_command): Use prepare_execution_command. 2014-03-12 Omair Javaid * arm-linux-nat.c (arm_linux_get_hwbp_cap): Updated. (MAX_BPTS): Define. (MAX_WPTS): Define. (struct arm_linux_thread_points): Removed. (struct arm_linux_process_info): New. (DEF_VEC_P (arm_linux_thread_points_p)): Removed. (VEC(arm_linux_thread_points_p) *arm_threads): Removed. (arm_linux_find_breakpoints_by_tid): Removed. (struct arch_lwp_info): New. (arm_linux_find_process_pid): New functions. (arm_linux_add_process): New functions. (arm_linux_process_info_get): New functions. (arm_linux_forget_process): New function. (arm_linux_get_debug_reg_state): New function. (struct update_registers_data): New. (update_registers_callback): New function. (arm_linux_insert_hw_breakpoint1): Updated. (arm_linux_remove_hw_breakpoint1): Updated. (arm_linux_insert_hw_breakpoint): Updated. (arm_linux_remove_hw_breakpoint): Updated. (arm_linux_insert_watchpoint): Updated. (arm_linux_remove_watchpoint): Updated. (arm_linux_new_thread): Updated. (arm_linux_prepare_to_resume): New function. (arm_linux_new_fork): New function. (_initialize_arm_linux_nat): Updated. 2014-03-12 Pedro Alves * Makefile.in (TARGET_FLAGS_TO_PASS): Add TESTS. 2014-03-12 Tom Tromey * inf-child.c (return_zero): New function. (inf_child_target): Set to_can_async_p, to_supports_non_stop. * aix-thread.c (aix_thread_inferior_created): New function. (aix_thread_attach): Remove. (init_aix_thread_ops): Don't set to_attach. (_initialize_aix_thread): Register inferior_created observer. * corelow.c (init_core_ops): Don't set to_attach or to_create_inferior. * exec.c (init_exec_ops): Don't set to_attach or to_create_inferior. * infcmd.c (run_command_1): Use find_run_target. Make direct target calls. (attach_command): Use find_attach_target. Make direct target calls. * record-btrace.c (init_record_btrace_ops): Don't set to_create_inferior. * record-full.c (record_full_can_async_p, record_full_is_async_p): Remove. (init_record_full_ops, init_record_full_core_ops): Update. Don't set to_create_inferior. * target.c (complete_target_initialization): Add assertion. (target_create_inferior): Remove. (find_default_attach, find_default_create_inferior): Remove. (find_attach_target, find_run_target): New functions. (find_default_is_async_p, find_default_can_async_p) (target_supports_non_stop, target_attach): Remove. (init_dummy_target): Don't set to_create_inferior or to_supports_non_stop. * target.h (struct target_ops) : Add comment. Remove TARGET_DEFAULT_FUNC. : Add comment. : Use TARGET_DEFAULT_RETURN. : Add comments. (find_attach_target, find_run_target): Declare. (target_create_inferior): Remove. (target_has_execution_1): Update comment. (target_supports_non_stop): Remove. * target-delegates.c: Rebuild. 2014-03-12 Pedro Alves * inf-child.h: Update comment to not mention Unix. 2014-03-12 Pedro Alves * inf-child.c: Update top comment to not mention Unix. Add generic comment describing how this target is meant to be used. (inf_child_post_attach, inf_child_post_startup_inferior) (inf_child_follow_fork, inf_child_pid_to_exec_file): Don't mention Unix in comment. 2014-03-12 Pedro Alves * nto-procfs.c: Include inf-child.h. (procfs_ops): Delete global. (procfs_can_run): Delete method. (procfs_detach, procfs_mourn_inferior): Unpush the passed in target pointer instead of referencing procfs_ops. (procfs_prepare_to_store): Delete. (init_procfs_ops): Delete function. (procfs_target): New function, based on init_procfs_ops, but inherit inf_child_target. (_initialize_procfs): Use procfs_target. 2014-03-12 Pedro Alves * windows-nat.c: Include inf-child.h. (windows_ops): Delete global. (windows_open, windows_prepare_to_store, windows_can_run): Delete methods. (init_windows_ops): Delete function. (windows_target): New function, based on init_windows_ops, but inherit inf_child_target. (_initialize_windows_nat): Use windows_target. Install x86 specific target methods here. 2014-03-10 Doug Evans * guile/guile.c (call_initialize_gdb_module): New function. (initialize_guile): Replace call to scm_init_guile with call to scm_with_guile. 2014-03-10 Joel Brobecker * ada-lang.c (ada_evaluate_subexp): Add missing space before '(' in call to TYPE_CODE macro. 2014-03-10 Jerome Guitton * ada-lang.c (ada_evaluate_subexp) : Resolve tagged types to full view. 2014-03-10 Hui Zhu * target.h (target_insert_breakpoint): Remove "hardware" from its comments. 2014-03-07 Doug Evans * dwarf2read.c (read_str_index): Rename local dwo_name to objf_name. 2014-03-07 Doug Evans * dwarf2read.c (read_cutu_die_from_dwo): Fix function comment. Remove unused local comp_dir_attr. Assert exactly one of stub_comp_unit_die, stub_comp_dir is non-NULL. 2014-03-07 Joel Brobecker * target.h (complete_target_initialization, add_target): Add comment. 2014-03-07 Pedro Alves * go32-nat.c: Include inf-child.h. (go32_ops): Delete global. (go32_close, go32_detach, go32_prepare_to_store, go32_can_run): Delete methods. (go32_create_inferior): Push the passed in target pointer instead of referencing go32_ops. (init_go32_ops): Delete function. Moved parts to _initialize_go32_nat. (go32_target): New function, based on init_go32_ops, but inherit inf_child_target. (_initialize_go32_nat): Use go32_target. Move parts of init_go32_ops here. 2014-03-06 Joel Brobecker * sol-thread.c: #include "symtab.h", "minsym.h" and "objfiles.h". (ps_pglobal_lookup): Use BMSYMBOL_VALUE_ADDRESS instead of SYMBOL_VALUE_ADDRESS. (info_cb): MSYMBOL_PRINT_NAME instead of SYMBOL_PRINT_NAME. 2014-03-06 Yao Qi * breakpoint.c (get_tracepoint_by_number): Remove argument optional_p. All callers updated. Adjust comments. Update output message. * breakpoint.h (get_tracepoint_by_number): Update declaration. 2014-03-06 Yao Qi * reverse.c (goto_bookmark_command): Add local 'p'. Emit error early if get_number returns zero. Use 'p' instead of 'args'. 2014-03-06 Yao Qi * cli/cli-utils.c (get_number_trailer): Add '\n' at the end of message. 2014-03-06 Yao Qi PR breakpoints/16508 * tracepoint.c (check_trace_running): New function. (trace_find_command): Move code to check_trace_running and call check_trace_running. (trace_find_pc_command): Likewise. (trace_find_tracepoint_command): Likewise. (trace_find_line_command): Likewise. (trace_find_range_command): Likewise. * tracepoint.h (check_trace_running): Likewise. * mi/mi-main.c (mi_cmd_trace_find): Call check_trace_running. 2014-03-06 Yao Qi * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN (tcomplain ()). * target-delegates.c: Regenerated. 2014-03-05 Pedro Alves PR gdb/16575 * dcache.c (dcache_poke_byte): Constify ptr parameter. Return void. Update comment. (dcache_xfer_memory): Delete. (dcache_read_memory_partial): New, based on the read bits of dcache_xfer_memory. (dcache_update): Add status parameter. Use ULONGEST for len, and adjust. Discard cache lines if the reason for the update was error. * dcache.h (dcache_xfer_memory): Delete declaration. (dcache_read_memory_partial): New declaration. (dcache_update): Update prototype. * target.c (raw_memory_xfer_partial): Update the dcache here. (memory_xfer_partial_1): Don't handle dcache writes here. 2014-03-05 Mike Frysinger * remote-sim.c (gdbsim_load): Add const to prog. 2014-03-03 Tom Tromey * elfread.c (probe_key): Change to bfd_data. (elf_get_probes, probe_key_free, _initialize_elfread): Probes are now per-BFD, not per-objfile. * stap-probe.c (stap_probe_destroy): Update comment. (handle_stap_probe): Allocate on the per-BFD obstack. 2014-03-03 Tom Tromey * break-catch-throw.c (fetch_probe_arguments): Use bound probes. * breakpoint.c (create_longjmp_master_breakpoint): Use get_probe_address. (add_location_to_breakpoint, bkpt_probe_insert_location) (bkpt_probe_remove_location): Update. * breakpoint.h (struct bp_location) : Now a bound_probe. * elfread.c (elf_symfile_relocate_probe): Remove. (elf_probe_fns): Update. (insert_exception_resume_breakpoint): Change type of "probe" parameter to bound_probe. (check_exception_resume): Update. * objfiles.c (objfile_relocate1): Don't relocate probes. * probe.c (bound_probe_s): New typedef. (parse_probes): Use get_probe_address. Set sal's objfile. (find_probe_by_pc): Return a bound_probe. (collect_probes): Return a VEC(bound_probe_s). (compare_probes): Update. (gen_ui_out_table_header_info): Change type of "probes" parameter. Update. (info_probes_for_ops): Update. (get_probe_address): New function. (probe_safe_evaluate_at_pc): Update. * probe.h (struct probe_ops) : New field. : Add objfile parameter. (struct probe) : Remove field. : New field.
: Update comment. (struct bound_probe): New. (find_probe_by_pc): Return a bound_probe. (get_probe_address): Declare. * solib-svr4.c (struct probe_and_action)
: New field. (hash_probe_and_action, equal_probe_and_action): Update. (register_solib_event_probe): Add address parameter. (solib_event_probe_at): Update. (svr4_create_probe_breakpoints): Add objfile parameter. Use get_probe_address. * stap-probe.c (struct stap_probe) : Update comment. (stap_get_probe_address): New function. (stap_can_evaluate_probe_arguments, compute_probe_arg) (compile_probe_arg): Update. (stap_set_semaphore, stap_clear_semaphore): Compute semaphore's address. (handle_stap_probe): Don't relocate the probe. (stap_relocate): Remove. (stap_gen_info_probes_table_values): Update. (stap_probe_ops): Remove stap_relocate. * symfile-debug.c (debug_sym_relocate_probe): Remove. (debug_sym_probe_fns): Update. * symfile.h (struct sym_probe_fns) : Remove. * symtab.c (init_sal): Use memset. * symtab.h (struct symtab_and_line) : New field. * tracepoint.c (start_tracing, stop_tracing): Update. 2014-03-03 Tom Tromey * probe.h (parse_probes, find_probe_by_pc) (find_probes_in_objfile): Fix comments. 2014-03-02 Doug Evans * infrun.c (handle_signal_stop): Replace test for TARGET_WAITKIND_STOPPED with an assert. 2014-03-02 Doug Evans * guile/scm-objfile.c (ofscm_mark_objfile_smob): Fix typo in comment. 2014-03-02 Doug Evans * guile/lib/gdb/printing.scm (append-pretty-printer!): Fix thinko. 2014-03-01 Mark Kettenis * obsd-nat.c: Include "gdb_wait.h" instead of . 2014-03-01 Mark Kettenis * i386obsd-nat.c: Include "obsd-nat.h". (_initialize_i386obsd_nat): Call obsd_add_target instead of add_target. * config/i386/obsd.mh (NATDEPFILES): Add obsd-nat.o. 2014-03-01 Mark Kettenis * i386obsd-nat.c (i386obsd_supply_pcb): Cast 'sf' to 'gdb_byte *'. 2014-03-01 Mark Kettenis * mips64obsd-nat.c: Include "obsd-nath". (_initialize_mips64obsd_nat): Call obsd_add_target instead of add_target * config/mips/obsd64.mh (NATDEPFILES): Add obsd-nat.o. 2014-03-01 Mark Kettenis * amd64obsd-nat.c: Include "obsd-nat,h. (_initialize_amd64obsd_nat): Call obsd_add_target instead of add_target. * config/i386/obsd64.mh (NATDEPFILES): Add obsd-nat.o. 2014-02-28 Siva Chandra Reddy * valops.c (find_oload_champ): Remove unneccesary argument METHOD. (find_overload_match): Update call to find_oload_champ. (find_oload_champ_namespace_loop): Likewise 2014-02-28 Mark Kettenis * Makefile.in (ALLDEPFILES): Add sparc64obsd-nat.c. * configure.host (sparc64-*-openbsd*): Set gdb_host to obsd64. * config/sparc/obsd64.mh: New file. * sparc64obsd-nat.c: New file. * obsd-nat.h: New file. * obsd-nat.c: New file. * Makefile.in (HFILES_NO_SRCDIR): Add obsd-nat.h. (ALLDEPFILES): Add obsd-nat.c. 2014-02-28 Tom Tromey * cli-out.c (cli_ui_out_impl): Now const. Remove comment. * cli-out.h (cli_ui_out_impl): Now const. * mi/mi-out.c (mi_ui_out_impl): Now const. Remove comment. * ui-out.c (struct ui_out) : Now const. (default_ui_out_impl): Now const. (ui_out_new): Make 'impl' parameter const. * ui-out.h (ui_out_new): Update. 2014-02-27 Mark Kettenis * solib-svr4.c (svr4_read_so_list): Initialize first_l_name to 0. 2014-02-27 Mark Kettenis * sparc-nat.c (sparc_xfer_wcookie): Always use process ID. 2014-02-27 Jan Kratochvil Additional PR 8882 fix. * solib-svr4.c (svr4_read_so_list): Change first to first_l_name. 2014-02-27 Pedro Alves * nat/linux-waitpid.c (my_waitpid): Only block signals if WNOHANG isn't set. 2014-02-27 Pedro Alves PR 12702 * linux-nat.c (status_to_str): Moved to nat/linux-waitpid.c. * nat/linux-waitpid.c: Include string.h. (status_to_str): Moved here and made extern. * nat/linux-waitpid.h (status_to_str): New declaration. 2014-02-27 Hui Zhu PR 12702 * infrun.c (ptid_match): Move ... * common/ptid.c (ptid_match): ... here. * inferior.h (ptid_match): Move ... * common/ptid.h (ptid_match): ... here. 2014-02-27 Mark Kettenis * mips64obsd-tdep.c (mips64obsd_init_abi): Call obsd_init_abi. * configure.tgt (mips64*-*-openbsd*): Add obsd-tdep.c to gdb_target_obs. 2014-02-27 Mark Kettenis * obsd-tdep.c (obsd_auxv_parse): New function. (obsd_init_abi): Set auxv_parse. * gdbarch.sh (auxv_parse): New. * gdbarch.h: Regenerated. * gdbarch.c: Regenerated. * auxv.c (target_auxv_parse): Call gdbarch_parse_auxv if provided. 2014-02-26 Ludovic Courtès * guile/scm-value.c (gdbscm_history_append_x): New function. (value_functions): Add it. 2014-02-27 Joel Brobecker * dwarf2read.c (attr_value_as_address): New function. (dwarf2_find_base_address, read_call_site_scope): Use attr_value_as_address in place of DW_ADDR. (dwarf2_get_pc_bounds): Use attr_value_as_address to get the low and high addresses. Slight rework of the handling of the high pc being a constant form, and limit it to DWARF verson 4 or higher. (dwarf2_record_block_ranges): Likewise. (read_partial_die): Likewise. (new_symbol_full): Use attr_value_as_address in place of DW_ADDR. 2014-02-26 Tom Tromey * exec.c (exec_file_attach): Hold a reference to exec_bfd. 2014-02-26 Tom Tromey * elfread.c (elf_read_minimal_symbols): Return early if minimal symbols have already been read. Add "ei" parameter. (elf_symfile_read): Call elf_read_minimal_symbols earlier. * minsyms.c (prim_record_minimal_symbol_full): Update. * objfiles.h (struct objstats) : Move... (struct objfile_per_bfd_storage) : ... here. * symmisc.c (print_objfile_statistics): Update. 2014-02-26 Tom Tromey * elfread.c (elf_read_minimal_symbols): New function, from elf_symfile_read. (elf_symfile_read): Call it. 2014-02-26 Tom Tromey * minsyms.c (lookup_minimal_symbol, iterate_over_minimal_symbols) (lookup_minimal_symbol_text, lookup_minimal_symbol_by_pc_name) (lookup_minimal_symbol_solib_trampoline) (lookup_minimal_symbol_by_pc_section_1) (lookup_minimal_symbol_and_objfile): Update. (prim_record_minimal_symbol_full): Use the per-BFD obstack. Don't allocate a minimal symbol if minsyms have already been read. (build_minimal_symbol_hash_tables): Update. (install_minimal_symbols): Do nothing if minsyms already read. Use the per-BFD obstack. (terminate_minimal_symbol_table): Use the per-BFD obstack. * objfiles.c (allocate_objfile): Call terminate_minimal_symbol_table later. (have_minimal_symbols): Update. * objfiles.h (struct objfile_per_bfd_storage) : Move from struct objfile. : New field. (struct objfile) : Move. (ALL_OBJFILE_MSYMBOLS): Update. * symfile.c (read_symbols): Set minsyms_read. (reread_symbols): Update. * symmisc.c (dump_objfile, dump_msymbols): Update. 2014-02-26 Tom Tromey * minsyms.c (msymbols_sort): Remove. * minsyms.h (msymbols_sort): Remove. * objfiles.c (objfile_relocate1): Don't relocate minsyms. * symtab.h (MSYMBOL_VALUE_ADDRESS): Use objfile offsets. * elfread.c (elf_symtab_read): Don't add section offsets. * xcoffread.c (record_minimal_symbol): Don't add section offset to minimal symbol address. * somread.c (text_offset, data_offset): Remove. (som_symtab_read): Don't add section offsets to minimal symbol addresses. * coff-pe-read.c (add_pe_forwarded_sym, read_pe_exported_syms): Don't add section offsets to minimal symbols. * coffread.c (coff_symtab_read): Don't add section offsets to minimal symbol addresses. * machoread.c (macho_symtab_add_minsym): Don't add section offset to minimal symbol addresses. * mipsread.c (read_alphacoff_dynamic_symtab): Don't add section offset to minimal symbol addresses. * mdebugread.c (parse_partial_symbols): Don't add section offset to minimal symbol addresses. * dbxread.c (read_dbx_dynamic_symtab): Don't add section offset to minimal symbol addresses. 2014-02-26 Tom Tromey * ada-lang.c (ada_main_name): Update. (ada_add_standard_exceptions): Update. * ada-tasks.c (ada_tasks_inferior_data_sniffer): Update. * aix-thread.c (pdc_symbol_addrs, pd_enable): Update. * arm-tdep.c (skip_prologue_function, arm_skip_stub): Update. * auxv.c (ld_so_xfer_auxv): Update. * avr-tdep.c (avr_scan_prologue): Update. * ax-gdb.c (gen_var_ref): Update. * blockframe.c (get_pc_function_start) (find_pc_partial_function_gnu_ifunc): Update. * breakpoint.c (create_overlay_event_breakpoint) (create_longjmp_master_breakpoint) (create_std_terminate_master_breakpoint) (create_exception_master_breakpoint): Update. * bsd-uthread.c (bsd_uthread_lookup_address): Update. * c-valprint.c (c_val_print): Update. * coff-pe-read.c (add_pe_forwarded_sym): Update. * common/agent.c (agent_look_up_symbols): Update. * dbxread.c (find_stab_function_addr, end_psymtab): Update. * dwarf2loc.c (call_site_to_target_addr): Update. * dwarf2read.c (dw2_find_pc_sect_symtab): Update. * elfread.c (elf_gnu_ifunc_record_cache) (elf_gnu_ifunc_resolve_by_got): Update. * findvar.c (default_read_var_value): Update. * frame.c (inside_main_func): Update. * frv-tdep.c (frv_frame_this_id): Update. * glibc-tdep.c (glibc_skip_solib_resolver): Update. * gnu-v3-abi.c (gnuv3_get_typeid, gnuv3_skip_trampoline): Update. * hppa-hpux-tdep.c (hppa64_hpux_search_dummy_call_sequence) (hppa_hpux_find_dummy_bpaddr): Update. * hppa-tdep.c (hppa_symbol_address): Update. * infcmd.c (until_next_command): Update. * jit.c (jit_read_descriptor, jit_breakpoint_re_set_internal): Update. * linespec.c (minsym_found, add_minsym): Update. * linux-nat.c (get_signo): Update. * linux-thread-db.c (inferior_has_bug): Update. * m32c-tdep.c (m32c_return_value) (m32c_m16c_address_to_pointer): Update. * m32r-tdep.c (m32r_frame_this_id): Update. * m68hc11-tdep.c (m68hc11_get_register_info): Update. * machoread.c (macho_resolve_oso_sym_with_minsym): Update. * maint.c (maintenance_translate_address): Update. * minsyms.c (lookup_minimal_symbol_by_pc_name): Update. (frob_address): New function. (lookup_minimal_symbol_by_pc_section_1): Use raw addresses, frob_address. Rename parameter to "pc_in". (compare_minimal_symbols, compact_minimal_symbols): Use raw addresses. (find_solib_trampoline_target, minimal_symbol_upper_bound): Update. * mips-linux-tdep.c (mips_linux_skip_resolver): Update. * mips-tdep.c (mips_skip_pic_trampoline_code): Update. * objc-lang.c (find_objc_msgsend): Update. * objfiles.c (objfile_relocate1): Update. * obsd-tdep.c (obsd_skip_solib_resolver): Update. * p-valprint.c (pascal_val_print): Update. * parse.c (write_exp_msymbol): Update. * ppc-linux-tdep.c (ppc_linux_spe_context_lookup) (ppc_elfv2_skip_entrypoint): Update. * ppc-sysv-tdep.c (convert_code_addr_to_desc_addr): Update. * printcmd.c (build_address_symbolic, msym_info) (address_info): Update. * proc-service.c (ps_pglobal_lookup): Update. * psymtab.c (find_pc_sect_psymtab_closer) (find_pc_sect_psymtab, find_pc_sect_symtab_from_partial): Change msymbol parameter to bound_minimal_symbol. * ravenscar-thread.c (get_running_thread_id): Update. * remote.c (remote_check_symbols): Update. * sh64-tdep.c (sh64_elf_make_msymbol_special): Use raw address. * sol2-tdep.c (sol2_skip_solib_resolver): Update. * solib-dsbt.c (lm_base): Update. * solib-frv.c (lm_base, main_got): Update. * solib-irix.c (locate_base): Update. * solib-som.c (som_solib_create_inferior_hook) (link_map_start): Update. * solib-spu.c (spu_enable_break, ocl_enable_break): Update. * solib-svr4.c (elf_locate_base, enable_break): Update. * spu-tdep.c (spu_get_overlay_table, spu_catch_start) (flush_ea_cache): Update. * stabsread.c (define_symbol, scan_file_globals): Update. * stack.c (find_frame_funname): Update. * symfile-debug.c (debug_qf_expand_symtabs_matching) (debug_qf_find_pc_sect_symtab): Update. * symfile.c (simple_read_overlay_table) (simple_overlay_update): Update. * symfile.h (struct quick_symbol_functions) : Change type of msymbol to bound_minimal_symbol. * symmisc.c (dump_msymbols): Update. * symtab.c (find_pc_sect_symtab_via_partial) (find_pc_sect_psymtab, find_pc_sect_line, skip_prologue_sal) (search_symbols, print_msymbol_info): Update. * symtab.h (MSYMBOL_VALUE_RAW_ADDRESS): New macro. (MSYMBOL_VALUE_ADDRESS): Redefine. (BMSYMBOL_VALUE_ADDRESS): New macro. * tracepoint.c (scope_info): Update. * tui/tui-disasm.c (tui_find_disassembly_address) (tui_get_begin_asm_address): Update. * valops.c (find_function_in_inferior): Update. * value.c (value_static_field, value_fn_field): Update. 2014-02-26 Tom Tromey * ada-lang.c (ada_update_initial_language): Update. (ada_main_name, ada_has_this_exception_support): Update. * ada-tasks.c (ada_tasks_inferior_data_sniffer): Update. * aix-thread.c (pdc_symbol_addrs, pd_enable): Update. * arm-tdep.c (arm_skip_stub): Update. * auxv.c (ld_so_xfer_auxv): Update. * avr-tdep.c (avr_scan_prologue): Update. * ax-gdb.c (gen_var_ref): Update. * breakpoint.c (struct breakpoint_objfile_data) : Change type to bound_minimal_symbol. (create_overlay_event_breakpoint) (create_longjmp_master_breakpoint) (create_std_terminate_master_breakpoint) (create_exception_master_breakpoint): Update. * bsd-uthread.c (bsd_uthread_lookup_address): Update. * c-exp.y (classify_name): Update. * coffread.c (coff_symfile_read): Update. * common/agent.c (agent_look_up_symbols): Update. * d-lang.c (d_main_name): Update. * dbxread.c (find_stab_function_addr, end_psymtab): Update. * dec-thread.c (enable_dec_thread): Update. * dwarf2loc.c (call_site_to_target_addr): Update. * elfread.c (elf_gnu_ifunc_resolve_by_got): Update. * eval.c (evaluate_subexp_standard): Update. * findvar.c (struct minsym_lookup_data) : Change type to bound_minimal_symbol. : Remove. (minsym_lookup_iterator_cb, default_read_var_value): Update. * frame.c (inside_main_func): Update. * frv-tdep.c (frv_frame_this_id): Update. * gcore.c (call_target_sbrk): Update. * glibc-tdep.c (glibc_skip_solib_resolver): Update. * gnu-v3-abi.c (gnuv3_get_typeid, gnuv3_skip_trampoline): Update. * go-lang.c (go_main_name): Update. * hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code) (hppa_hpux_find_import_stub_for_addr): Update. * hppa-tdep.c (hppa_extract_17, hppa_lookup_stub_minimal_symbol): Update. Change return type. * hppa-tdep.h (hppa_lookup_stub_minimal_symbol): Change return type. * jit.c (jit_breakpoint_re_set_internal): Update. * linux-fork.c (inferior_call_waitpid, checkpoint_command): Update. * linux-nat.c (get_signo): Update. * linux-thread-db.c (inferior_has_bug): Update * m32c-tdep.c (m32c_return_value) (m32c_m16c_address_to_pointer): Update. * m32r-tdep.c (m32r_frame_this_id): Update. * m68hc11-tdep.c (m68hc11_get_register_info): Update. * machoread.c (macho_resolve_oso_sym_with_minsym): Update. * minsyms.c (lookup_minimal_symbol_internal): Rename to lookup_minimal_symbol. Change return type. (lookup_minimal_symbol): Remove. (lookup_bound_minimal_symbol): Update. (lookup_minimal_symbol_text): Change return type. (lookup_minimal_symbol_solib_trampoline): Change return type. * minsyms.h (lookup_minimal_symbol, lookup_minimal_symbol_text) (lookup_minimal_symbol_solib_trampoline): Change return type. * mips-linux-tdep.c (mips_linux_skip_resolver): Update. * objc-lang.c (lookup_objc_class, lookup_child_selector) (value_nsstring, find_imps): Update. * obsd-tdep.c (obsd_skip_solib_resolver): Update. * p-lang.c (pascal_main_name): Update. * ppc-linux-tdep.c (ppc_linux_spe_context_lookup): Update. * ppc-sysv-tdep.c (convert_code_addr_to_desc_addr): Update. * proc-service.c (ps_pglobal_lookup): Update. * ravenscar-thread.c (get_running_thread_msymbol): Change return type. (has_ravenscar_runtime, get_running_thread_id): Update. * remote.c (remote_check_symbols): Update. * sol-thread.c (ps_pglobal_lookup): Update. * sol2-tdep.c (sol2_skip_solib_resolver): Update. * solib-dsbt.c (lm_base): Update. * solib-frv.c (lm_base, frv_relocate_section_addresses): Update. * solib-irix.c (locate_base): Update. * solib-som.c (som_solib_create_inferior_hook) (som_solib_desire_dynamic_linker_symbols, link_map_start): Update. * solib-spu.c (spu_enable_break): Update. * solib-svr4.c (elf_locate_base, enable_break): Update. * spu-tdep.c (spu_get_overlay_table, spu_catch_start) (flush_ea_cache): Update. * stabsread.c (define_symbol): Update. * symfile.c (simple_read_overlay_table): Update. * symtab.c (find_pc_sect_line): Update. * tracepoint.c (scope_info): Update. * tui-disasm.c (tui_get_begin_asm_address): Update. * value.c (value_static_field): Update. 2014-02-26 Tom Tromey * minsyms.c (prim_record_minimal_symbol_full): Use SET_MSYMBOL_VALUE_ADDRESS. * objfiles.c (objfile_relocate1): Use SET_MSYMBOL_VALUE_ADDRESS. * sh64-tdep.c (sh64_elf_make_msymbol_special): Use SET_MSYMBOL_VALUE_ADDRESS. * symtab.h (MSYMBOL_VALUE_ADDRESS): Expand to an rvalue. (SET_MSYMBOL_VALUE_ADDRESS): New macro. 2014-02-26 Tom Tromey * symtab.h (struct minimal_symbol) : Rename from ginfo. (MSYMBOL_VALUE, MSYMBOL_VALUE_ADDRESS, MSYMBOL_VALUE_BYTES) (MSYMBOL_BLOCK_VALUE, MSYMBOL_VALUE_CHAIN, MSYMBOL_LANGUAGE) (MSYMBOL_SECTION, MSYMBOL_OBJ_SECTION, MSYMBOL_NATURAL_NAME) (MSYMBOL_LINKAGE_NAME, MSYMBOL_PRINT_NAME, MSYMBOL_DEMANGLED_NAME) (MSYMBOL_SET_LANGUAGE, MSYMBOL_SEARCH_NAME) (MSYMBOL_MATCHES_SEARCH_NAME, MSYMBOL_SET_NAMES): New macros. * ada-lang.c (ada_main_name): Update. (ada_lookup_simple_minsym): Update. (ada_make_symbol_completion_list): Update. (ada_add_standard_exceptions): Update. * ada-tasks.c (read_atcb, ada_tasks_inferior_data_sniffer): Update. * aix-thread.c (pdc_symbol_addrs, pd_enable): Update. * amd64-windows-tdep.c (amd64_skip_main_prologue): Update. * arm-tdep.c (skip_prologue_function): Update. (arm_skip_stack_protector, arm_skip_stub): Update. * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update. (arm_wince_skip_main_prologue): Update. * auxv.c (ld_so_xfer_auxv): Update. * avr-tdep.c (avr_scan_prologue): Update. * ax-gdb.c (gen_var_ref): Update. * block.c (call_site_for_pc): Update. * blockframe.c (get_pc_function_start): Update. (find_pc_partial_function_gnu_ifunc): Update. * breakpoint.c (create_overlay_event_breakpoint): Update. (create_longjmp_master_breakpoint): Update. (create_std_terminate_master_breakpoint): Update. (create_exception_master_breakpoint): Update. (resolve_sal_pc): Update. * bsd-uthread.c (bsd_uthread_lookup_address): Update. * btrace.c (ftrace_print_function_name, ftrace_function_switched): Update. * c-valprint.c (c_val_print): Update. * coff-pe-read.c (add_pe_forwarded_sym): Update. * coffread.c (coff_symfile_read): Update. * common/agent.c (agent_look_up_symbols): Update. * dbxread.c (find_stab_function_addr): Update. (end_psymtab): Update. * dwarf2loc.c (call_site_to_target_addr): Update. (func_verify_no_selftailcall): Update. (tailcall_dump): Update. (call_site_find_chain_1): Update. (dwarf_expr_reg_to_entry_parameter): Update. * elfread.c (elf_gnu_ifunc_record_cache): Update. (elf_gnu_ifunc_resolve_by_got): Update. * f-valprint.c (info_common_command): Update. * findvar.c (read_var_value): Update. * frame.c (get_prev_frame_1): Update. (inside_main_func): Update. * frv-tdep.c (frv_skip_main_prologue): Update. (frv_frame_this_id): Update. * glibc-tdep.c (glibc_skip_solib_resolver): Update. * gnu-v2-abi.c (gnuv2_value_rtti_type): Update. * gnu-v3-abi.c (gnuv3_rtti_type): Update. (gnuv3_skip_trampoline): Update. * hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline): Update. (hppa64_hpux_in_solib_call_trampoline): Update. (hppa_hpux_skip_trampoline_code): Update. (hppa64_hpux_search_dummy_call_sequence): Update. (hppa_hpux_find_import_stub_for_addr): Update. (hppa_hpux_find_dummy_bpaddr): Update. * hppa-tdep.c (hppa_symbol_address) (hppa_lookup_stub_minimal_symbol): Update. * i386-tdep.c (i386_skip_main_prologue): Update. (i386_pe_skip_trampoline_code): Update. * ia64-tdep.c (ia64_convert_from_func_ptr_addr): Update. * infcall.c (get_function_name): Update. * infcmd.c (until_next_command): Update. * jit.c (jit_breakpoint_re_set_internal): Update. (jit_inferior_init): Update. * linespec.c (minsym_found): Update. (add_minsym): Update. * linux-fork.c (info_checkpoints_command): Update. * linux-nat.c (get_signo): Update. * linux-thread-db.c (inferior_has_bug): Update. * m32c-tdep.c (m32c_return_value): Update. (m32c_m16c_address_to_pointer): Update. (m32c_m16c_pointer_to_address): Update. * m32r-tdep.c (m32r_frame_this_id): Update. * m68hc11-tdep.c (m68hc11_get_register_info): Update. * machoread.c (macho_resolve_oso_sym_with_minsym): Update. * maint.c (maintenance_translate_address): Update. * minsyms.c (add_minsym_to_hash_table): Update. (add_minsym_to_demangled_hash_table): Update. (msymbol_objfile): Update. (lookup_minimal_symbol): Update. (iterate_over_minimal_symbols): Update. (lookup_minimal_symbol_text): Update. (lookup_minimal_symbol_by_pc_name): Update. (lookup_minimal_symbol_solib_trampoline): Update. (lookup_minimal_symbol_by_pc_section_1): Update. (lookup_minimal_symbol_and_objfile): Update. (prim_record_minimal_symbol_full): Update. (compare_minimal_symbols): Update. (compact_minimal_symbols): Update. (build_minimal_symbol_hash_tables): Update. (install_minimal_symbols): Update. (terminate_minimal_symbol_table): Update. (find_solib_trampoline_target): Update. (minimal_symbol_upper_bound): Update. * mips-linux-tdep.c (mips_linux_skip_resolver): Update. * mips-tdep.c (mips_stub_frame_sniffer): Update. (mips_skip_pic_trampoline_code): Update. * msp430-tdep.c (msp430_skip_trampoline_code): Update. * objc-lang.c (selectors_info): Update. (classes_info): Update. (find_methods): Update. (find_imps): Update. (find_objc_msgsend): Update. * objfiles.c (objfile_relocate1): Update. * objfiles.h (ALL_OBJFILE_MSYMBOLS): Update. * obsd-tdep.c (obsd_skip_solib_resolver): Update. * p-valprint.c (pascal_val_print): Update. * parse.c (write_exp_msymbol): Update. * ppc-linux-tdep.c (powerpc_linux_in_dynsym_resolve_code) (ppc_linux_spe_context_lookup, ppc_elfv2_skip_entrypoint): Update. * ppc-sysv-tdep.c (convert_code_addr_to_desc_addr): Update. * printcmd.c (build_address_symbolic): Update. (sym_info): Update. (address_info): Update. * proc-service.c (ps_pglobal_lookup): Update. * psymtab.c (find_pc_sect_psymtab_closer): Update. (find_pc_sect_psymtab): Update. * python/py-framefilter.c (py_print_frame): Update. * ravenscar-thread.c (get_running_thread_id): Update. * record-btrace.c (btrace_call_history, btrace_get_bfun_name): Update. * remote.c (remote_check_symbols): Update. * rs6000-tdep.c (rs6000_skip_main_prologue): Update. (rs6000_skip_trampoline_code): Update. * sh64-tdep.c (sh64_elf_make_msymbol_special): Update. * sol2-tdep.c (sol2_skip_solib_resolver): Update. * solib-dsbt.c (lm_base): Update. * solib-frv.c (lm_base): Update. (main_got): Update. * solib-irix.c (locate_base): Update. * solib-som.c (som_solib_create_inferior_hook): Update. (som_solib_desire_dynamic_linker_symbols): Update. (link_map_start): Update. * solib-spu.c (spu_enable_break): Update. (ocl_enable_break): Update. * solib-svr4.c (elf_locate_base): Update. (enable_break): Update. * spu-tdep.c (spu_get_overlay_table): Update. (spu_catch_start): Update. (flush_ea_cache): Update. * stabsread.c (define_symbol): Update. (scan_file_globals): Update. * stack.c (find_frame_funname): Update. (frame_info): Update. * symfile.c (simple_read_overlay_table): Update. (simple_overlay_update): Update. * symmisc.c (dump_msymbols): Update. * symtab.c (fixup_section): Update. (find_pc_sect_line): Update. (skip_prologue_sal): Update. (search_symbols): Update. (print_msymbol_info): Update. (rbreak_command): Update. (MCOMPLETION_LIST_ADD_SYMBOL): New macro. (completion_list_objc_symbol): Update. (default_make_symbol_completion_list_break_on): Update. * tracepoint.c (scope_info): Update. * tui/tui-disasm.c (tui_find_disassembly_address): Update. (tui_get_begin_asm_address): Update. * valops.c (find_function_in_inferior): Update. * value.c (value_static_field): Update. (value_fn_field): Update. 2014-02-26 Tom Tromey * blockframe.c (find_pc_partial_function_gnu_ifunc): Use bound minimal symbols. Move code that knows about minsym table layout... * minsyms.c (minimal_symbol_upper_bound): ... here. New function. * minsyms.h (minimal_symbol_upper_bound): Declare. * objc-lang.c (find_objc_msgsend): Use bound minimal symbols, minimal_symbol_upper_bound. 2014-02-27 Joel Brobecker * python/lib/gdb/printing.py (RegexpCollectionPrettyPrinter): Use the type's name if its basic type does not have a tag. 2014-02-27 Joel Brobecker * dwarf2read.c (read_subrange_type): Add comment. 2014-02-27 Joel Brobecker * dwarf2read.c (update_enumeration_type_from_children): New function, mostly extracted from process_structure_scope. (read_enumeration_type): Call update_enumeration_type_from_children. (process_enumeration_scope): Do not set THIS_TYPE's flag_unsigned and flag_flag_enum fields. 2014-02-26 Pedro Alves * bsd-uthread.c (bsd_uthread_xfer_partial): Delete function. (bsd_uthread_target): Don't install bsd_uthread_xfer_partial as to_xfer_partial method. 2014-02-26 Pedro Alves * target.c (complete_target_initialization): Don't install default_xfer_partial as to_xfer_partial hook. (nomemory): Delete. (update_current_target): Don't INHERIT nor de_fault deprecated_xfer_memory. Delete de_fault macro. (default_xfer_partial, deprecated_debug_xfer_memory): Delete. (setup_target_debug): Don't install a deprecated_xfer_memory hook. * target.h (struct target_ops) : Delete field. 2014-02-26 Pedro Alves * go32-nat.c (my_write_child): New function. (go32_xfer_memory): Rewrite as to_xfer_partial helper. (go32_xfer_partial): New function. (init_go32_ops): Don't install a deprecated_xfer_memory hook. Instead install a to_xfer_partial hook. 2014-02-26 Pedro Alves * nto-procfs.c (procfs_xfer_memory): Adjust interface as a to_xfer_partial helper. Rewrite. (procfs_xfer_partial): New function. (init_procfs_ops): Don't install a deprecated_xfer_memory hook. Install a to_xfer_partial hook. 2014-02-26 Pedro Alves * remote-m32r-sdi.c (send_data): Constify 'buf' parameter. (m32r_xfer_memory): Adjust as a to_xfer_partial helper. (m32r_xfer_partial): New function. (init_m32r_ops): Don't install a deprecated_xfer_memory hook. Install a to_xfer_partial hook. 2014-02-26 Pedro Alves * remote-mips.c (mips_xfer_memory): Adjust as to_xfer_partial helper. (mips_xfer_partial): New function. (_initialize_remote_mips): Don't install a deprecated_xfer_memory hook. Install a to_xfer_partial hook. 2014-02-26 Joel Brobecker * gdbtypes.h (create_array_type_with_stride): Add declaration. * gdbtypes.c (create_array_type_with_stride): New function, renaming create_array_type, but with an added parameter called "bit_stride". (create_array_type): Re-implement using create_array_type_with_stride. * dwarf2read.c (read_array_type): Add support for DW_AT_byte_stride and DW_AT_bit_stride attributes. 2014-02-26 Pedro Alves * breakpoint.c (bpstat_check_breakpoint_conditions): Handle task-specific breakpoints. 2014-02-25 Pedro Alves * ia64-linux-nat.c (ia64_linux_xfer_partial): Reimplement handling of object == TARGET_OBJECT_UNWIND_TABLE. 2014-02-25 Stan Shebs * defs.h: Annotate comments for Doxygen. 2014-02-25 Tom Tromey * target.h (target_ignore): Don't declare. * target.c (target_ignore): Remove. 2014-02-25 Jan Kratochvil PR gdb/16626 * auto-load.c (auto_load_objfile_script_1): Change filename to debugfile. 2014-02-25 Joel Brobecker * ia64-linux-nat.c (ia64_linux_xfer_partial): Add function documentation. Adjust prototype to match the target_ops to_xfer_partial method. Adjust implementation accordingly. 2014-02-25 Hui Zhu * target.h (target_ops): Fix TARGET_DEFAULT_RETURN of to_traceframe_info. 2014-02-25 Kevin Buettner * rl78-tdep.c (RL78_BANK0_RP0_PTR_REGNUM, RL78_BANK0_RP1_PTR_REGNUM) (RL78_BANK0_RP2_PTR_REGNUM, RL78_BANK0_RP3_PTR_REGNUM) (RL78_BANK1_RP0_PTR_REGNUM, RL78_BANK1_RP1_PTR_REGNUM) (RL78_BANK1_RP2_PTR_REGNUM, RL78_BANK1_RP3_PTR_REGNUM) (RL78_BANK2_RP0_PTR_REGNUM, RL78_BANK2_RP1_PTR_REGNUM) (RL78_BANK2_RP2_PTR_REGNUM, RL78_BANK2_RP3_PTR_REGNUM) (RL78_BANK3_RP0_PTR_REGNUM, RL78_BANK3_RP1_PTR_REGNUM) (RL78_BANK3_RP2_PTR_REGNUM, RL78_BANK3_RP3_PTR_REGNUM): New constants. (rl78_register_type): Use a data pointer type for SP and new pseudo registers mentioned above. Use a 16 bit integer type for all other register pairs. (rl78_register_name, rl78_g10_register_name): Update for new pseudo registers. (rl78_pseudo_register_read): Likewise. (rl78_pseudo_register_write): Likewise. (rl78_dwarf_reg_to_regnum): Return register numbers representing to the newly added pseudo registers. 2014-02-24 Doug Evans * value.c (record_latest_value): Fix comment. * printcmd.c (print_command_1): Remove code to handle -1 return from record_latest_value. 2014-02-24 Pedro Alves * procfs.c (procfs_target): Don't install procfs_xfer_memory as deprecated_xfer_memory hook. (procfs_xfer_partial): Call procfs_xfer_memory instead of the deprecated_xfer_memory target hook. (procfs_xfer_memory): Adjust interface as a to_xfer_partial helper. 2014-02-24 Yuanhui Zhang * windows-nat.c (windows_xfer_shared_libraries): Return TARGET_XFER_EOF if LEN is zero to fix an assert failure when requested object is TARGET_OBJECT_LIBRARIES. 2014-02-24 Yao Qi * target.h (enum target_xfer_status) : Rename it to ... : ... it with setting value 2 explicitly. New. * corefile.c (memory_error_message): User updated. * exec.c (section_table_read_available_memory): Likewise. * record-btrace.c (record_btrace_xfer_partial): Likewise. * target.c (target_xfer_status_to_string): Likewise. (raw_memory_xfer_partial): Likewise. (memory_xfer_partial_1, target_xfer_partial): Likewise. * valops.c (read_value_memory): Likewise. * exec.h: Update comments. 2014-02-24 Yao Qi * target.c (target_xfer_status_to_string): Rename argument err to status. * target.h (target_xfer_status_to_string): Update declaration. Replace target_xfer_error_to_string with target_xfer_status_to_string in comment. 2014-02-24 Yao Qi * mips-linux-nat.c (super_close): Update its type. (mips_linux_close): Pass 'self' to super_close. 2014-02-24 Yao Qi * target.h (TARGET_XFER_STATUS_ERROR_P): Remove. * corefile.c (read_memory): Adjusted. * target.c (target_write_with_progress): Adjusted. 2014-02-23 Yao Qi Revert two patches: 2013-10-25 Yao Qi * remote.c (remote_traceframe_info): Return early if traceframe is not selected. 2013-07-19 Yao Qi * target.c (update_current_target): Change the default action of 'to_traceframe_info' from tcomplain to return_zero. * target.h (struct target_ops) : Add more comments. 2014-02-23 Yao Qi * valops.c (read_value_memory): Rewrite it. Call target_xfer_partial in a loop. * exec.h (section_table_available_memory): Remove declaration. Move comments to ... * exec.c (section_table_available_memory): ... here. Make it static. 2014-02-23 Yao Qi * exec.c (section_table_read_available_memory): New function. * exec.h (section_table_read_available_memory): Declare. * ctf.c (ctf_xfer_partial): Call section_table_read_available_memory. * tracefile-tfile.c (tfile_xfer_partial): Likewise. 2014-02-23 Yao Qi * ctf.c (ctf_xfer_partial): Move code to ... * exec.c (exec_read_partial_read_only): ... it. New function. * tracefile-tfile.c (tfile_xfer_partial): Likewise. * tracefile.c: Include "exec.h". * exec.h (exec_read_partial_read_only): Declare. 2014-02-23 Yao Qi * tracefile-tfile.c (tfile_has_all_memory): Remove. (tfile_has_memory): Remove. (init_tfile_ops): Don't set fields to_has_all_memory and to_has_memory of tfile_ops. * tracefile.c (tracefile_has_all_memory): New function. (tracefile_has_memory): New function. (init_tracefile_ops): Initialize fields to_has_all_memory and to_has_memory of 'ops'. 2014-02-23 Yao Qi * ctf.c (ctf_has_stack, ctf_has_registers): Remove. (ctf_thread_alive, ctf_get_trace_status): Remove. (init_ctf_ops): Don't set some fields of ctf_ops. Call init_tracefile_ops. * tracefile-tfile.c (tfile_get_trace_status): Remove. (tfile_has_stack, tfile_has_registers): Remove. (tfile_thread_alive): Remove. (init_tfile_ops): Don't set some fields of tfile_ops. Call init_tracefile_ops. * tracefile.c (tracefile_has_stack): New function. (tracefile_has_registers): New function. (tracefile_thread_alive): New function. (tracefile_get_trace_status): New function. (init_tracefile_ops): New function. * tracefile.h (init_tracefile_ops): Declare. 2014-02-23 Yao Qi * tracepoint.c (TFILE_PID): Move it to tracefile-tfile.c. (O_LARGEFILE): Likewise. (tfile_ops): Likewise. (TRACE_HEADER_SIZE): Likewise. (trace_fd, trace_frames_offset, cur_offset): Likewise. (cur_data_size): Likewise. (tfile_read, tfile_open, tfile_interp_line): Likewise. (tfile_close, tfile_files_info): Likewise. (tfile_get_trace_status): Likewise. (tfile_get_tracepoint_status): Likewise. (tfile_get_traceframe_address): Likewise. (tfile_trace_find, match_blocktype): Likewise. (traceframe_walk_blocks, traceframe_find_block_type): Likewise. (tfile_fetch_registers, tfile_xfer_partial): Likewise. (tfile_get_trace_state_variable_value): Likewise. (tfile_has_all_memory, tfile_has_memory): Likewise. (tfile_has_stack, tfile_has_registers): Likewise. (tfile_thread_alive, build_traceframe_info): Likewise. (tfile_traceframe_info, init_tfile_ops): Likewise. (_initialize_tracepoint): Don't call init_tfile_ops and add_target_with_completer. * tracefile-tfile.c: Include regcache.h, inferior.h, gdbthread.h, exec.h, completer.h and filenames.h. (_initialize_tracefile_tfile): New function. 2014-02-23 Yao Qi * Makefile.in (REMOTE_OBS): Append tracefile.o and tracefile-tfile.o. (HFILES_NO_SRCDIR): Add tracefile.h. * ctf.c: Include "tracefile.h". * tracefile.h: New file. * tracefile.c: New file * tracefile-tfile.c: New file. * tracepoint.c: Include "tracefile.h". (free_uploaded_tps, free_uploaded_tsvs): Remove declarations. (stop_reason_names): Add const. (trace_file_writer_xfree): Move it to tracefile.c. (trace_save, trace_save_command, trace_save_tfile): Likewise. (trace_save_ctf): Likewise. (struct tfile_trace_file_writer): Move it to tracefile-tfile.c. (tfile_target_save, tfile_dtor, tfile_start): Likewise. (tfile_write_header, tfile_write_regblock_type): Likewise. (tfile_write_status, tfile_write_uploaded_tsv): Likewise. (tfile_write_uploaded_tp, tfile_write_definition_end): Likewise. (tfile_write_raw_data, tfile_end): Likewise. (tfile_trace_file_writer_new): Likewise. (free_uploaded_tp): Make it extern. (free_uploaded_tsv): Make it extern. (_initialize_tracepoint): Move code to register command 'tsave' to tracefile.c. * tracepoint.h (stop_reason_names): Declare. (struct trace_frame_write_ops): Move it to tracefile.h. (struct trace_file_write_ops): Likewise. (struct trace_file_writer): Likewise. (free_uploaded_tsvs, free_uploaded_tps): Declare. 2014-02-21 Jan Kratochvil PR gdb/16594 * common/linux-osdata.c (linux_common_core_of_thread): Find the end of process name. (get_cores_used_by_process): New parameter num_cores, use it. (linux_xfer_osdata_processes): Pass num_cores to it. * linux-tdep.c (linux_info_proc, linux_fill_prpsinfo): Find the end of process name. 2014-02-21 Andreas Arnez * target.c (memory_xfer_partial): Fix length arg in call to breakpoint_xfer_memory. 2014-02-20 Sergio Durigan Junior PR tdep/16397 * i386-tdep.c (i386_stap_parse_special_token_triplet): Check if a number comes after the + or - signs. Adjust length of register name to be extracted. 2014-02-20 Tom Tromey * varobj.h (c_varobj_ops, cplus_varobj_ops, java_varobj_ops) (ada_varobj_ops): Mark "extern". 2014-02-20 Tom Tromey * dbxread.c (read_dbx_symtab): Remove last_o_file_start. 2014-02-20 Doug Evans * guile/scm-gsmob.c (gdbscm_init_eqable_gsmob): New arg containing_scm. All callers updated. (gdbscm_fill_eqable_gsmob_ptr_slot): Delete arg containing_scm. All callers updated. * guile/guile-internal.h (gdbscm_init_eqable_gsmob): Update. (gdbscm_fill_eqable_gsmob_ptr_slot): Update. 2014-02-20 lin zuojian Joel Brobecker Doug Evans PR symtab/16581 * dwarf2read.c (struct die_info): New member in_process. (reset_die_in_process): New function. (process_die): Set it at the start, reset when returning. (inherit_abstract_dies): Only call process_die if origin_child_die not already being processed. 2014-02-20 Joel Brobecker * windows-nat.c (handle_unload_dll): Add function documentation. (do_initial_windows_stuff): Add comment explaining why we wait until after inferior initialization has finished before processing all DLLs. 2014-02-20 Joel Brobecker * windows-nat.c (get_module_name): Delete. (windows_get_exec_module_filename): New function, mostly inspired from get_module_name. (windows_pid_to_exec_file): Replace call to get_module_name by call to windows_get_exec_module_filename. 2014-02-20 Joel Brobecker * windows-nat.c (handle_load_dll): Rewrite this function's introductory comment. Remove code using get_module_name to get the DLL's name. 2014-02-20 Joel Brobecker * windows-nat.c (get_windows_debug_event): Ignore LOAD_DLL_DEBUG_EVENT and UNLOAD_DLL_DEBUG_EVENT if windows_initialization_done == 0. (windows_add_all_dlls): Renames windows_ensure_ntdll_loaded. Adjust implementation to always load all DLLs. (do_initial_windows_stuff): Replace call to windows_ensure_ntdll_loaded by call to windows_add_all_dlls. 2014-02-20 Joel Brobecker * windows-nat.c (_initialize_windows_nat): Deprecate the "dll-symbols" command. Turn the "add-shared-symbol-files" and "assf" aliases into commands, and deprecate them as well. * NEWS: Add entry explaining that "dll-symbols" and its two aliases are now deprecated. 2014-02-20 Joel Brobecker * dec-thread.c (dec_thread_get_ada_task_ptid): Avoid unescaped new-line in debug string. Remove trailing spaces. 2014-02-19 Stan Shebs * darwin-nat.c (darwin_xfer_partial): Fix return type. 2014-02-19 Siva Chandra Reddy * NEWS: Add entry for the new feature * python/py-value.c (valpy_binop): Call value_x_binop for struct and class values. 2014-02-19 Stan Shebs * MAINTAINERS: List Yao Qi as nios2 maintainer. 2014-02-19 Pedro Alves * common/ptid.h (struct ptid): Mention that process_stratum targets should prefer ptid.lwp. 2014-02-19 Pedro Alves * remote.c (remote_thread_alive, write_ptid, read_ptid) (read_ptid, remote_newthread_step, remote_threads_extra_info) (remote_get_ada_task_ptid, append_resumption, remote_stop_ns) (threadalive_test, remote_pid_to_str): Use the ptid.lwp field to store remote thread ids rather than ptid.tid. (_initialize_remote): Adjust. 2014-02-19 Tom Tromey * target.c (target_get_unwinder): Rewrite. (target_get_tailcall_unwinder): Rewrite. * record-btrace.c (record_btrace_to_get_unwinder): New function. (record_btrace_to_get_tailcall_unwinder): New function. (init_record_btrace_ops): Update. * target.h (struct target_ops) : Now function pointers. Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * nto-procfs.c (procfs_remove_hw_breakpoint): Add 'self' argument. (init_procfs_ops): Correctly set to_remove_hw_breakpoint. 2014-02-19 Tom Tromey * record-btrace.c (record_btrace_decr_pc_after_break): Delegate directly. * target-delegates.c: Rebuild. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. * target.c (default_target_decr_pc_after_break): Rename from forward_target_decr_pc_after_break. Simplify. (target_decr_pc_after_break): Rely on delegation. 2014-02-19 Tom Tromey * target.c (update_current_target): Do not INHERIT to_doc or to_magic. Do not de_fault to_open or to_close. 2014-02-19 Tom Tromey * gcore.h (objfile_find_memory_regions): Declare. * gcore.c (objfile_find_memory_regions): No longer static. Add "self" argument. (_initialize_gcore): Don't call exec_set_find_memory_regions. * exec.c: Include gcore.h. (exec_set_find_memory_regions): Remove. (exec_find_memory_regions): Remove. (exec_do_find_memory_regions): Remove. (init_exec_ops): Update. * defs.h (exec_set_find_memory_regions): Remove. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.h (struct target_ops) : Use NULL, not 0, in TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target.c (complete_target_initialization): Remove casts. Use return_zero_has_execution. (return_zero): Add "ignore" argument. (return_zero_has_execution): New function. (init_dummy_target): Remove casts. Use return_zero_has_execution. 2014-02-19 Tom Tromey * target.c (update_current_target): Update comments. Do not INHERIT to_stratum. 2014-02-19 Tom Tromey * arm-linux-nat.c (arm_linux_read_description): Delegate when needed. * corelow.c (core_read_description): Delegate when needed. * remote.c (remote_read_description): Delegate when needed. * target-delegates.c: Rebuild. * target.c (target_read_description): Rewrite. * target.h (struct target_ops) : Update comment. Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_can_run. (find_default_run_target): Check against delegate_can_run. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_disconnect): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * record.c (record_stop): Unconditionally delegate. * target-delegates.c: Rebuild. * target.c (target_stop_recording): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_enable_btrace): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_read_btrace): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_teardown_btrace): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_disable_btrace): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (default_search_memory): New function. (simple_search_memory): Update comment. (target_search_memory): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. 2014-02-19 Tom Tromey * auxv.c (default_auxv_parse): No longer static. (target_auxv_parse): Unconditionally delegate. * auxv.h (default_auxv_parse): Declare. * target-delegates.c: Rebuild. * target.c: Include auxv.h. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_memory_map): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_thread_alive): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_save_record): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_delete_record): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_record_is_replaying): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_goto_record_begin): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_goto_record_end): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_goto_record): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_insn_history): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_insn_history_from): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_insn_history_range): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_call_history): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_call_history_from): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_call_history_range): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_verify_memory): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_core_of_thread): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_flash_done): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_flash_erase): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_get_section_table): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_pid_to_str): Unconditionally delegate. (init_dummy_target): Don't initialize to_pid_to_str. (default_pid_to_str): Rename from dummy_pid_to_str. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_find_new_threads): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_program_signals): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_pass_signals): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (default_mourn_inferior): New function. (target_mourn_inferior): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (default_follow_fork): New function. (target_follow_fork): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_kill): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_masked_watch_num_registers): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_remove_mask_watchpoint): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_insert_mask_watchpoint): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_ranged_break_num_registers): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_fetch_registers): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_stop. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_can_run_breakpoint_commands. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_supports_evaluation_of_breakpoint_conditions. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_augmented_libraries_svr4_read. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_can_use_agent. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_use_agent. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_traceframe_info. (return_null): Remove. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_static_tracepoint_markers_by_strid. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_static_tracepoint_marker_at. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_set_permissions. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_get_tib_address. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_set_trace_notes. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't initialize to_set_trace_buffer_size. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_set_circular_trace_buffer. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_set_disconnected_tracing. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_get_min_fast_tracepoint_insn_len. (return_minus_one): Remove. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_get_raw_trace_data. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_upload_trace_state_variables. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_upload_tracepoints. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_save_trace_data. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_get_trace_state_variable_value. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_trace_find. * target.h (struct target_ops): Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_trace_stop. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_get_tracepoint_status. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_get_trace_status. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_trace_start. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_trace_set_readonly_regions. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_disable_tracepoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_enable_tracepoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_download_trace_state_variable. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_can_download_tracepoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_download_tracepoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_trace_init. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_supports_string_tracing. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_supports_enable_disable_tracepoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_supports_multi_process. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_get_ada_task_ptid. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_thread_architecture. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_execution_direction. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_can_execute_reverse. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. (target_can_execute_reverse): Unconditionally delegate. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_goto_bookmark. (dummy_goto_bookmark): Remove. (init_dummy_target): Don't inherit or default to_goto_bookmark. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_get_bookmark. (dummy_get_bookmark): Remove. (init_dummy_target): Don't inherit or default to_get_bookmark. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_make_corefile_notes. (init_dummy_target): Don't initialize to_make_corefile_notes. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_find_memory_regions. (init_dummy_target): Don't initialize to_find_memory_regions. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_log_command. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. (target_log_command): Unconditionally delegate. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_pid_to_exec_file. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_thread_name. (target_thread_name): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_extra_thread_info. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_has_exited. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN.. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_set_syscall_catchpoint. (return_one): Remove. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_insert_exec_catchpoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-01-08 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_insert_exec_catchpoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_remove_vfork_catchpoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_insert_vfork_catchpoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_remove_fork_catchpoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_insert_fork_catchpoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_post_startup_inferior. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_load. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_terminal_info. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_terminal_save_ours. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_terminal_ours. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_terminal_ours_for_output. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_terminal_inferior. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_terminal_init. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_can_accel_watchpoint_condition. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_region_ok_for_hw_watchpoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_watchpoint_addr_within_range. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_remove_watchpoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_insert_watchpoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_remove_hw_breakpoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_insert_hw_breakpoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_can_use_hw_breakpoint. * target.h (struct target_ops) : Use TARGET_DEFAULT_RETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_files_info. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_store. * target.h (struct target_ops) : Use TARGET_DEFAULT_NORETURN. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_post_attach. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (update_current_target): Don't inherit or default to_rcmd. (default_rcmd): New function. (do_monitor_command): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (init_dummy_target): Don't initialize to_attach. (target_attach): Unconditionally delegate. * target.h (struct target_ops) : Use TARGET_DEFAULT_FUNC. 2014-02-19 Tom Tromey * target-delegates.c: Rebuild. * target.c (target_detach): Unconditionally delegate. (init_dummy_target): Don't initialize to_detach. * target.h (struct target_ops) : Use TARGET_DEFAULT_IGNORE. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_augmented_libraries_svr4_read): Add argument. * target.c (update_current_target): Update. * remote.c (remote_augmented_libraries_svr4_read): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_call_history_range): Add argument. * record-btrace.c (record_btrace_call_history_range): Add 'self' argument. (record_btrace_call_history_from): Update. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_call_history_from): Add argument. * record-btrace.c (record_btrace_call_history_from): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_call_history): Add argument. * record-btrace.c (record_btrace_call_history): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_insn_history_range): Add argument. * record-btrace.c (record_btrace_insn_history_range): Add 'self' argument. (record_btrace_insn_history_from): Update. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_insn_history_from): Add argument. * record-btrace.c (record_btrace_insn_history_from): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_insn_history): Add argument. * record-btrace.c (record_btrace_insn_history): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_goto_record): Add argument. * record-full.c (record_full_goto): Add 'self' argument. * record-btrace.c (record_btrace_goto): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_goto_record_end): Add argument. * record-full.c (record_full_goto_end): Add 'self' argument. * record-btrace.c (record_btrace_goto_end): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_goto_record_begin): Add argument. * record-full.c (record_full_goto_begin): Add 'self' argument. * record-btrace.c (record_btrace_goto_begin): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_record_is_replaying): Add argument. * record-full.c (record_full_is_replaying): Add 'self' argument. * record-btrace.c (record_btrace_is_replaying): Add 'self' argument. (record_btrace_xfer_partial, record_btrace_store_registers) (record_btrace_prepare_to_store, record_btrace_resume) (record_btrace_wait, record_btrace_decr_pc_after_break) (record_btrace_find_new_threads, record_btrace_thread_alive): Update. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_delete_record): Add argument. * record-full.c (record_full_delete): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_save_record): Add argument. * record-full.c (record_full_save): Add 'self' argument. (record_full_save): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_info_record): Add argument. * record.c (info_record_command): Add argument. * record-full.c (record_full_info): Add 'self' argument. * record-btrace.c (record_btrace_info): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_stop_recording): Add argument. * record.c (record_stop): Add argument. * record-btrace.c (record_btrace_stop_recording): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (struct target_ops) : Add argument. * remote.c (struct target_ops) : Add 'self' argument. * amd64-linux-nat.c (amd64_linux_read_btrace): New function. (_initialize_amd64_linux_nat): Use it. * i386-linux-nat.c (i386_linux_read_btrace): New function. (_initialize_i386_linux_nat): Use it. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_teardown_btrace): Add argument. * remote.c (remote_teardown_btrace): Add 'self' argument. * i386-linux-nat.c (i386_linux_teardown_btrace): Add 'self' argument. * amd64-linux-nat.c (amd64_linux_teardown_btrace): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_disable_btrace): Add argument. * remote.c (remote_disable_btrace): Add 'self' argument. * i386-linux-nat.c (i386_linux_disable_btrace): Add 'self' argument. * amd64-linux-nat.c (amd64_linux_disable_btrace): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_enable_btrace): Add argument. * remote.c (remote_enable_btrace): Add 'self' argument. * i386-linux-nat.c (i386_linux_enable_btrace): Add 'self' argument. * amd64-linux-nat.c (amd64_linux_enable_btrace): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_can_use_agent): Add argument. * target.c (update_current_target): Update. * remote.c (remote_can_use_agent): Add 'self' argument. * inf-child.c (inf_child_can_use_agent): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_use_agent): Add argument. * target.c (update_current_target): Update. * remote.c (remote_use_agent): Add 'self' argument. * inf-child.c (inf_child_use_agent): Add 'self' argument. 2014-02-19 Tom Tromey * tracepoint.c (tfile_traceframe_info): Add 'self' argument. * target.h (struct target_ops) : Add argument. (target_traceframe_info): Add argument. * target.c (update_current_target): Update. * remote.c (remote_traceframe_info): Add 'self' argument. * ctf.c (ctf_traceframe_info): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (target_static_tracepoint_markers_by_strid): Add argument. (struct target_ops) : Add 'self' argument. * target.c (update_current_target): Update. * remote.c (struct target_ops) : Add 'self' argument. * linux-nat.c (struct target_ops) : Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_static_tracepoint_marker_at): Add argument. * target.c (update_current_target): Update. * remote.c (remote_static_tracepoint_marker_at): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_set_permissions): Add argument. * target.c (update_current_target): Update. * remote.c (remote_set_permissions): Add 'self' argument. (remote_start_remote): Update. 2014-02-19 Tom Tromey * windows-nat.c (windows_get_tib_address): Add 'self' argument. * target.h (struct target_ops) : Add argument. (target_get_tib_address): Add argument. * target.c (update_current_target): Update. * remote.c (remote_get_tib_address): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_set_trace_notes): Add argument. * target.c (update_current_target): Update. * remote.c (remote_set_trace_notes): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_set_trace_buffer_size): Add argument. * target.c (update_current_target): Update. * remote.c (remote_set_trace_buffer_size): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_set_circular_trace_buffer): Add argument. * target.c (update_current_target): Update. * remote.c (remote_set_circular_trace_buffer): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_set_disconnected_tracing): Add argument. * target.c (update_current_target): Update. * remote.c (remote_set_disconnected_tracing): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_get_min_fast_tracepoint_insn_len): Add argument. * target.c (update_current_target): Update. * remote.c (remote_get_min_fast_tracepoint_insn_len): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_get_raw_trace_data): Add argument. * target.c (update_current_target): Update. * remote.c (remote_get_raw_trace_data): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_upload_trace_state_variables): Add argument. * target.c (update_current_target): Update. * remote.c (remote_upload_trace_state_variables): Add 'self' argument. (remote_start_remote): Update. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_upload_tracepoints): Add argument. * target.c (update_current_target): Update. * remote.c (remote_upload_tracepoints): Add 'self' argument. (remote_start_remote): Update. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_save_trace_data): Add argument. * target.c (update_current_target): Update. * remote.c (remote_save_trace_data): Add 'self' argument. 2014-02-19 Tom Tromey * tracepoint.c (tfile_get_trace_state_variable_value): Add 'self' argument. * target.h (struct target_ops) : Add argument. (target_get_trace_state_variable_value): Add argument. * target.c (update_current_target): Update. * remote.c (remote_get_trace_state_variable_value): Add 'self' argument. * ctf.c (ctf_get_trace_state_variable_value): Add 'self' argument. 2014-02-19 Tom Tromey * tracepoint.c (tfile_trace_find): Add 'self' argument. * target.h (struct target_ops) : Add argument. (target_trace_find): Add argument. * target.c (update_current_target): Update. * remote.c (remote_trace_find): Add 'self' argument. * ctf.c (ctf_trace_find): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_trace_stop): Add argument. * target.c (update_current_target): Update. * remote.c (remote_trace_stop): Add 'self' argument. 2014-02-19 Tom Tromey * tracepoint.c (tfile_get_tracepoint_status): Add 'self' argument. * target.h (struct target_ops) : Add argument. (target_get_tracepoint_status): Add argument. * target.c (update_current_target): Update. * remote.c (remote_get_tracepoint_status): Add 'self' argument. 2014-02-19 Tom Tromey * tracepoint.c (tfile_get_trace_status): Add 'self' argument. * target.h (struct target_ops) : Add argument. (target_get_trace_status): Add argument. * target.c (update_current_target): Update. * remote.c (remote_get_trace_status): Add 'self' argument. (remote_start_remote, remote_can_download_tracepoint): Update. * ctf.c (ctf_get_trace_status): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_trace_start): Add argument. * target.c (update_current_target): Update. * remote.c (remote_trace_start): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_trace_set_readonly_regions): Add argument. * target.c (update_current_target): Update. * remote.c (remote_trace_set_readonly_regions): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_disable_tracepoint): Add argument. * target.c (update_current_target): Update. * remote.c (remote_disable_tracepoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_enable_tracepoint): Add argument. * target.c (update_current_target): Update. * remote.c (remote_enable_tracepoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_download_trace_state_variable): Add argument. * target.c (update_current_target): Update. * remote.c (remote_download_trace_state_variable): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_can_download_tracepoint): Add argument. * target.c (update_current_target): Update. * remote.c (remote_can_download_tracepoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_download_tracepoint): Add argument. * target.c (update_current_target): Update. * remote.c (remote_download_tracepoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_trace_init): Add argument. * target.c (update_current_target): Update. * remote.c (remote_trace_init): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_fileio_readlink): Add argument. * remote.c (remote_hostio_readlink): Add 'self' argument. * inf-child.c (inf_child_fileio_readlink): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_fileio_unlink): Add argument. * remote.c (remote_hostio_unlink): Add 'self' argument. (remote_file_delete): Update. * inf-child.c (inf_child_fileio_unlink): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_fileio_close): Add argument. * remote.c (remote_hostio_close): Add 'self' argument. (remote_hostio_close_cleanup): Update. (remote_bfd_iovec_close, remote_file_put, remote_file_get): Update. * inf-child.c (inf_child_fileio_close): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_fileio_pread): Add argument. * remote.c (remote_hostio_pread): Add 'self' argument. (remote_bfd_iovec_pread, remote_file_get): Update. * inf-child.c (inf_child_fileio_pread): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_fileio_pwrite): Add argument. * remote.c (remote_hostio_pwrite): Add 'self' argument. (remote_file_put): Update. * inf-child.c (inf_child_fileio_pwrite): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_fileio_open): Add argument. * remote.c (remote_hostio_open): Add 'self' argument. (remote_bfd_iovec_open): Add 'self' argument. (remote_file_put): Add 'self' argument. (remote_file_get): Add 'self' argument. * inf-child.c (inf_child_fileio_open): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_can_run_breakpoint_commands): Add argument. * target.c (update_current_target): Update. * remote.c (remote_can_run_breakpoint_commands): Add 'self' argument. (remote_insert_breakpoint): Add 'self' argument. (remote_insert_hw_breakpoint): Add 'self' argument. (remote_can_run_breakpoint_commands): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_supports_evaluation_of_breakpoint_conditions): Add argument. * target.c (update_current_target): Update. * remote.c (remote_supports_cond_breakpoints): Add 'self' argument. (remote_insert_breakpoint): Add 'self' argument. (remote_insert_hw_breakpoint): Add 'self' argument. (remote_supports_cond_breakpoints): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_supports_string_tracing): Add argument. * target.c (update_current_target): Update. * remote.c (remote_supports_string_tracing): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (find_default_supports_disable_randomization): Add argument. (target_supports_disable_randomization): Add argument. (find_default_supports_disable_randomization): Add 'self' argument. * remote.c (extended_remote_supports_disable_randomization): Add 'self' argument. (remote_supports_disable_randomization): Add 'self' argument. (extended_remote_create_inferior): Update. * linux-nat.c (linux_nat_supports_disable_randomization): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_supports_enable_disable_tracepoint): Add argument. * target.c (update_current_target): Update. * remote.c (remote_supports_enable_disable_tracepoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_supports_multi_process): Add argument. * target.c (update_current_target): Update. * remote.c (remote_supports_multi_process): Add 'self' argument. * linux-nat.c (linux_nat_supports_multi_process): Add 'self' argument. * darwin-nat.c (darwin_supports_multi_process): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_execution_direction): Add argument. * target.c (default_execution_direction): Add 'self' argument. * record-full.c (record_full_execution_direction): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_can_execute_reverse): Add argument. * remote.c (remote_can_execute_reverse): Add 'self' argument. * record-full.c (record_full_can_execute_reverse): Add 'self' argument. * record-btrace.c (record_btrace_can_execute_reverse): Add 'self' argument. 2014-02-19 Tom Tromey * windows-nat.c (windows_get_ada_task_ptid): Add 'self' argument. * target.h (struct target_ops) : Add argument. (target_get_ada_task_ptid): Add argument. * target.c (update_current_target): Update. (default_get_ada_task_ptid): Add 'self' argument. * sol-thread.c (sol_get_ada_task_ptid): Add 'self' argument. * remote.c (remote_get_ada_task_ptid): Add 'self' argument. * ravenscar-thread.c (ravenscar_get_ada_task_ptid): Add 'self' argument. * linux-thread-db.c (thread_db_get_ada_task_ptid): Add 'self' argument. * inf-ttrace.c (inf_ttrace_get_ada_task_ptid): Add 'self' argument. * dec-thread.c (dec_thread_get_ada_task_ptid): Add 'self' argument. * darwin-nat.c (darwin_get_ada_task_ptid): Add 'self' argument. * aix-thread.c (aix_thread_get_ada_task_ptid): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_goto_bookmark): Add argument. * target.c (dummy_goto_bookmark): Add 'self' argument. * record-full.c (record_full_goto_bookmark): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_get_bookmark): Add argument. * target.c (dummy_get_bookmark): Add 'self' argument. * record-full.c (record_full_get_bookmark): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_make_corefile_notes): Add argument. * target.c (dummy_make_corefile_notes): Add 'self' argument. * procfs.c (procfs_make_note_section): Add 'self' argument. (procfs_make_note_section): Add 'self' argument. (procfs_make_note_section): Add 'self' argument. * linux-nat.c (linux_nat_make_corefile_notes): Add 'self' argument. * fbsd-nat.h (fbsd_make_corefile_notes): Add 'self' argument. * fbsd-nat.c (fbsd_make_corefile_notes): Add 'self' argument. * exec.c (exec_make_note_section): Add 'self' argument. (exec_make_note_section): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_find_memory_regions): Add argument. * target.c (dummy_find_memory_regions): Add 'self' argument. * procfs.c (proc_find_memory_regions): Add 'self' argument. * gnu-nat.c (gnu_find_memory_regions): Add 'self' argument. * fbsd-nat.h (fbsd_find_memory_regions): Add 'self' argument. * fbsd-nat.c (fbsd_find_memory_regions): Add 'self' argument. * exec. (exec_do_find_memory_regions): New global. (exec_set_find_memory_regions): Rewrite. (exec_find_memory_regions): New function. (init_exec_ops): Use exec_find_memory_regions. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (find_default_supports_non_stop): Add argument. (target_supports_non_stop): Add argument. (find_default_supports_non_stop): Add 'self' argument. * remote.c (remote_supports_non_stop): Add 'self' argument. * linux-nat.c (linux_nat_supports_non_stop): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_log_command): Add argument. * serial.h (serial_log_command): Add 'self' argument. * serial.c (serial_log_command): Add 'self' argument. 2014-02-19 Tom Tromey * windows-nat.c (windows_pid_to_exec_file): Add 'self' argument. * target.h (struct target_ops) : Add argument. (target_pid_to_exec_file): Add argument. * target.c (debug_to_pid_to_exec_file): Add argument. (update_current_target): Update. * nbsd-nat.h (nbsd_pid_to_exec_file): Add 'self' argument. * nbsd-nat.c (nbsd_pid_to_exec_file): Add 'self' argument. * linux-nat.c (linux_child_pid_to_exec_file): Add 'self' argument. (linux_handle_extended_wait): Update. * inf-child.c (inf_child_pid_to_exec_file): Add 'self' argument. * fbsd-nat.h (fbsd_pid_to_exec_file): Add 'self' argument. * fbsd-nat.c (fbsd_pid_to_exec_file): Add 'self' argument. * darwin-nat.c (darwin_pid_to_exec_file): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_rcmd): Add argument. * target.c (debug_to_rcmd): Add argument. (update_current_target, do_monitor_command): Update. * remote.c (remote_rcmd): Add 'self' argument. * monitor.c (monitor_rcmd): Add 'self' argument. 2014-02-19 Tom Tromey * windows-nat.c (windows_stop): Add 'self' argument. * target.h (struct target_ops) : Add argument. * target.c (target_stop): Add argument. (debug_to_stop): Add argument. (update_current_target): Update. * remote.c (remote_stop): Add 'self' argument. * remote-sim.c (gdbsim_stop): Add 'self' argument. (gdbsim_cntrl_c): Update. * remote-m32r-sdi.c (m32r_stop): Add 'self' argument. * procfs.c (procfs_stop): Add 'self' argument. * nto-procfs.c (procfs_stop): Add 'self' argument. * monitor.c (monitor_stop): Add 'self' argument. (monitor_open): Update. * linux-nat.c (linux_nat_stop): Add argument. * inf-ptrace.c (inf_ptrace_stop): Add 'self' argument. * gnu-nat.c (gnu_stop): Add 'self' argument. * darwin-nat.c (darwin_stop): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_thread_name): Add argument. (update_current_target): Update. * linux-nat.c (linux_nat_thread_name): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_extra_thread_info): Add argument. * target.c (update_current_target): Update. * remote.c (remote_threads_extra_info): Add 'self' argument. * ravenscar-thread.c (ravenscar_extra_thread_info): Add 'self' argument. * nto-tdep.h (nto_extra_thread_info): Add 'self' argument. * nto-tdep.c (nto_extra_thread_info): Add 'self' argument. * linux-thread-db.c (thread_db_extra_thread_info): Add 'self' argument. * inf-ttrace.c (inf_ttrace_extra_thread_info): Add 'self' argument. * bsd-uthread.c (bsd_uthread_extra_thread_info): Add 'self' argument. * aix-thread.c (aix_thread_extra_thread_info): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_program_signals): Add argument. * remote.c (remote_program_signals): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_pass_signals): Add argument. * remote.c (remote_pass_signals): Add 'self' argument. (remote_start_remote): Update. * procfs.c (procfs_pass_signals): Add 'self' argument. * nto-procfs.c (procfs_pass_signals): Add 'self' argument. * linux-nat.c (linux_nat_pass_signals): Add 'self' argument. (linux_nat_create_inferior, linux_nat_attach): Update. 2014-02-19 Tom Tromey * windows-nat.c (windows_can_run): Add 'self' argument. * target.h (struct target_ops) : Add argument. (target_can_run): Add argument. * target.c (debug_to_can_run): Add argument. (update_current_target): Update. * nto-procfs.c (procfs_can_run): Add 'self' argument. * inf-child.c (inf_child_can_run): Add 'self' argument. * go32-nat.c (go32_can_run): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_has_exited): Add argument. * target.c (debug_to_has_exited): Add argument. (update_current_target): Update. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_set_syscall_catchpoint): Add argument. * linux-nat.c (linux_child_set_syscall_catchpoint): Add 'self' argument. * target.c (update_current_target): Update. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_remove_exec_catchpoint): Add argument. * target.c (debug_to_remove_exec_catchpoint): Add argument. (update_current_target): Update. * linux-nat.c (linux_child_remove_exec_catchpoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_insert_exec_catchpoint): Add argument. * target.c (debug_to_insert_exec_catchpoint): Add argument. (update_current_target): Update. * linux-nat.c (linux_child_insert_exec_catchpoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_remove_vfork_catchpoint): Add argument. * target.c (debug_to_remove_vfork_catchpoint): Add argument. (update_current_target): Update. * linux-nat.c (linux_child_remove_vfork_catchpoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_insert_vfork_catchpoint): Add argument. * target.c (debug_to_insert_vfork_catchpoint): Add argument. (update_current_target): Update. * linux-nat.c (linux_child_insert_vfork_catchpoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_remove_fork_catchpoint): Add argument. * target.c (debug_to_remove_fork_catchpoint): Add argument. (update_current_target): Update. * linux-nat.c (linux_child_remove_fork_catchpoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_insert_fork_catchpoint): Add argument. * target.c (debug_to_insert_fork_catchpoint): Add argument. (update_current_target): Update. * linux-nat.c (linux_child_insert_fork_catchpoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_post_startup_inferior): Add argument. * target.c (debug_to_post_startup_inferior): Add argument. (update_current_target): Update. * spu-linux-nat.c (spu_child_post_startup_inferior): Add 'self' argument. * linux-nat.c (linux_child_post_startup_inferior): Add 'self' argument. * inf-ptrace.c (inf_ptrace_post_startup_inferior): Add 'self' argument. * inf-child.c (inf_child_post_startup_inferior): Add 'self' argument. * i386-linux-nat.c (i386_linux_child_post_startup_inferior): Add 'self' argument. (super_post_startup_inferior): Likewise. * amd64-linux-nat.c (amd64_linux_child_post_startup_inferior): Add 'self' argument. (super_post_startup_inferior): Likewise. * aarch64-linux-nat.c (aarch64_linux_child_post_startup_inferior): Add 'self' argument. (super_post_startup_inferior): Likewise. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_load): Add argument. (debug_to_load): Add argument. (update_current_target): Update. * remote.c (remote_load): Add 'self' argument. * remote-sim.c (gdbsim_load): Add 'self' argument. * remote-mips.c (mips_load): Add 'self' argument. * remote-m32r-sdi.c (m32r_load): Add 'self' argument. * monitor.c (monitor_load): Add 'self' argument. * m32r-rom.c (m32r_load_gen): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_terminal_info): Add argument. * target.c (debug_to_terminal_info): Add argument. (default_terminal_info): Likewise. * inflow.c (child_terminal_info): Add 'self' argument. * inferior.h (child_terminal_info): Add 'self' argument. * go32-nat.c (go32_terminal_info): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_terminal_save_ours): Add argument. * target.c (debug_to_terminal_save_ours): Add argument. (update_current_target): Update. * inflow.c (terminal_save_ours): Add 'self' argument. * inferior.h (terminal_save_ours): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_terminal_ours): Add argument. * target.c (debug_to_terminal_ours): Add argument. (update_current_target): Update. * remote.c (remote_terminal_ours): Add 'self' argument. (remote_close): Update. * linux-nat.c (linux_nat_terminal_ours): Add 'self' argument. * inflow.c (terminal_ours): Add 'self' argument. * inferior.h (terminal_ours): Add 'self' argument. * go32-nat.c (go32_terminal_ours): Add 'self' argument. 2014-02-19 Pedro Alves Tom Tromey * target.h (struct target_ops) : Add argument. (target_terminal_ours_for_output): Add argument. * target.c (debug_to_terminal_ours_for_output): Add argument. (update_current_target): Update. * inflow.c (terminal_ours_for_output): Add 'self' argument. * inferior.h (terminal_ours_for_output): Add 'self' argument. * go32-nat.c (go32_terminal_ours): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. * target.c (target_terminal_inferior): Add argument. (update_current_target): Update. * remote.c (remote_terminal_inferior): Add 'self' argument. * linux-nat.c (linux_nat_terminal_inferior): Add 'self' argument. * inflow.c (terminal_inferior): Add 'self' argument. * inferior.h (terminal_inferior): Add 'self' argument. * go32-nat.c (go32_terminal_inferior): Add 'self' argument. (go32_terminal_inferior): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_terminal_init): Add argument. * target.c (debug_to_terminal_init): Add argument. (update_current_target): Update. * inflow.c (terminal_init_inferior): Add 'self' argument. * inferior.h (terminal_init_inferior): Add 'self' argument. * go32-nat.c (go32_terminal_init): Add 'self' argument. * gnu-nat.c (gnu_terminal_init_inferior): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_can_accel_watchpoint_condition): Add argument. * target.c (debug_to_can_accel_watchpoint_condition): Add argument. (update_current_target): Update. * ppc-linux-nat.c (ppc_linux_can_accel_watchpoint_condition): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_region_ok_for_hw_watchpoint): Add argument. * target.c (debug_to_region_ok_for_hw_watchpoint): Add argument. (default_region_ok_for_hw_watchpoint): Add argument. * spu-multiarch.c (spu_region_ok_for_hw_watchpoint): Add argument. * s390-linux-nat.c (s390_region_ok_for_hw_watchpoint): Add 'self' argument. * remote.c (remote_region_ok_for_hw_watchpoint): Add 'self' argument. * procfs.c (procfs_region_ok_for_hw_watchpoint): Add 'self' argument. * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Add 'self' argument. * mips-linux-nat.c (mips_linux_region_ok_for_hw_watchpoint): Add 'self' argument. * inf-ttrace.c (inf_ttrace_region_ok_for_hw_watchpoint): Add 'self' argument. * i386-nat.c (i386_region_ok_for_watchpoint): Add 'self' argument. * arm-linux-nat.c (arm_linux_region_ok_for_hw_watchpoint): Add 'self' argument. * aarch64-linux-nat.c (aarch64_linux_region_ok_for_hw_watchpoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_insert_watchpoint): Add argument. * target.c (debug_to_insert_watchpoint): Add argument. (update_current_target): Update. * s390-linux-nat.c (s390_insert_watchpoint): Add 'self' argument. * remote.c (remote_insert_watchpoint): Add 'self' argument. * remote-mips.c (mips_insert_watchpoint): Add 'self' argument. * remote-m32r-sdi.c (m32r_insert_watchpoint): Add 'self' argument. * procfs.c (procfs_insert_watchpoint): Add 'self' argument. * ppc-linux-nat.c (ppc_linux_insert_watchpoint): Add 'self' argument. * nto-procfs.c (procfs_insert_hw_watchpoint): Add 'self' argument. (procfs_insert_hw_watchpoint): Add 'self' argument. * mips-linux-nat.c (mips_linux_insert_watchpoint): Add 'self' argument. * inf-ttrace.c (inf_ttrace_insert_watchpoint): Add 'self' argument. * ia64-linux-nat.c (ia64_linux_insert_watchpoint): Add 'self' argument. * i386-nat.c (i386_insert_watchpoint): Add 'self' argument. * arm-linux-nat.c (arm_linux_insert_watchpoint): Add 'self' argument. * aarch64-linux-nat.c (aarch64_linux_insert_watchpoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_remove_watchpoint): Add argument. * target.c (debug_to_remove_watchpoint): Add argument. (update_current_target): Update. * s390-linux-nat.c (s390_remove_watchpoint): Add 'self' argument. * remote.c (remote_remove_watchpoint): Add 'self' argument. * remote-mips.c (mips_remove_watchpoint): Add 'self' argument. * remote-m32r-sdi.c (m32r_remove_watchpoint): Add 'self' argument. * procfs.c (procfs_remove_watchpoint): Add 'self' argument. * ppc-linux-nat.c (ppc_linux_remove_watchpoint): Add 'self' argument. * nto-procfs.c (procfs_remove_hw_watchpoint): Add 'self' argument. * mips-linux-nat.c (mips_linux_remove_watchpoint): Add 'self' argument. * inf-ttrace.c (inf_ttrace_remove_watchpoint): Add 'self' argument. * ia64-linux-nat.c (ia64_linux_remove_watchpoint): Add 'self' argument. * i386-nat.c (i386_remove_watchpoint): Add 'self' argument. * arm-linux-nat.c (arm_linux_remove_watchpoint): Add 'self' argument. * aarch64-linux-nat.c (aarch64_linux_remove_watchpoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_remove_hw_breakpoint): Add argument. * target.c (debug_to_remove_hw_breakpoint): Add argument. (update_current_target): Update. * remote.c (remote_remove_hw_breakpoint): Add 'self' argument. * ppc-linux-nat.c (ppc_linux_remove_hw_breakpoint): Add 'self' argument. * i386-nat.c (i386_remove_hw_breakpoint): Add 'self' argument. * arm-linux-nat.c (arm_linux_remove_hw_breakpoint): Add 'self' argument. * aarch64-linux-nat.c (aarch64_linux_remove_hw_breakpoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_insert_hw_breakpoint): Add argument. * target.c (debug_to_insert_hw_breakpoint): Add argument. (update_current_target): Update. * remote.c (remote_insert_hw_breakpoint): Add 'self' argument. * ppc-linux-nat.c (ppc_linux_insert_hw_breakpoint): Add 'self' argument. * nto-procfs.c (procfs_insert_hw_breakpoint): Add 'self' argument. * i386-nat.c (i386_insert_hw_breakpoint): Add 'self' argument. * arm-linux-nat.c (arm_linux_insert_hw_breakpoint): Add 'self' argument. * aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_can_use_hardware_watchpoint): Add argument. * target.c (debug_to_can_use_hw_breakpoint): Add argument. (update_current_target): Update. * spu-linux-nat.c (spu_can_use_hw_breakpoint): Add 'self' argument. * s390-linux-nat.c (s390_can_use_hw_breakpoint): Add 'self' argument. * remote.c (remote_check_watch_resources): Add 'self' argument. * remote-mips.c (mips_can_use_watchpoint): Add 'self' argument. * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint): Add 'self' argument. * procfs.c (procfs_can_use_hw_breakpoint): Add 'self' argument. * ppc-linux-nat.c (ppc_linux_can_use_hw_breakpoint): Add 'self' argument. * nto-procfs.c (procfs_can_use_hw_breakpoint): Add 'self' argument. * mips-linux-nat.c (mips_linux_can_use_hw_breakpoint): Add 'self' argument. * inf-ttrace.c (inf_ttrace_can_use_hw_breakpoint): Add 'self' argument. * ia64-linux-nat.c (ia64_linux_can_use_hw_breakpoint): Add 'self' argument. * ia64-hpux-nat.c (ia64_hpux_can_use_hw_breakpoint): Add 'self' argument. * i386-nat.c (i386_can_use_hw_breakpoint): Add 'self' argument. * arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Add 'self' argument. * aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): Add 'self' argument. 2014-02-19 Tom Tromey * target.h (struct target_ops) : Add argument. (target_post_attach): Add argument. * target.c (debug_to_post_attach): Add argument. (update_current_target): Update. * spu-linux-nat.c (spu_child_post_attach): Add 'self' argument. * nto-procfs.c (procfs_post_attach): Add 'self' argument. * linux-nat.c (linux_child_post_attach): Add 'self' argument. * inf-ptrace.c (inf_ptrace_post_attach): Add 'self' argument. * inf-child.c (inf_child_post_attach): Add 'self' argument. 2014-02-19 Tom Tromey * windows-nat.c (windows_close): Add 'self' argument. * tracepoint.c (tfile_close): Add 'self' argument. * target.h (struct target_ops) : Add argument. * target.c (target_close): Add argument. (update_current_target): Update. * remote.c (remote_close): Add 'self' argument. * remote-sim.c (gdbsim_close): Add 'self' argument. * remote-mips.c (mips_close): Add 'self' argument. * remote-m32r-sdi.c (m32r_close): Add 'self' argument. * record-full.c (record_full_close): Add 'self' argument. * record-btrace.c (record_btrace_close): Add 'self' argument. * monitor.h (monitor_close): Add 'self' argument. * monitor.c (monitor_close): Add 'self' argument. * mips-linux-nat.c (mips_linux_close): Add 'self' argument. * linux-nat.c (linux_nat_close): Add argument. * go32-nat.c (go32_close): Add 'self' argument. * exec.c (exec_close_1): Add 'self' argument. * ctf.c (ctf_close): Add 'self' argument. * corelow.c (core_close): Add 'self' argument. (core_close_cleanup): Update. * bsd-uthread.c (bsd_uthread_close): Add 'self' argument. * bsd-kvm.c (bsd_kvm_close): Add 'self' argument. 2014-02-19 Tom Tromey * remote.c (remote_load): New function. (init_remote_ops): Use it. 2014-02-19 Tom Tromey * common/linux-btrace.c (linux_supports_btrace): Add "ops" argument. * common/linux-btrace.h (linux_supports_btrace): Update. * remote.c (remote_supports_btrace): Add "self" argument. * target-delegates.c: Rebuild. * target.c (target_supports_btrace): Remove. * target.h (struct target_ops) : Add target_ops argument. (target_supports_btrace): New define. 2014-02-19 Tom Tromey * record-full.c (record_full_beneath_to_resume_ops) (record_full_beneath_to_resume, record_full_beneath_to_wait_ops) (record_full_beneath_to_wait) (record_full_beneath_to_store_registers_ops) (record_full_beneath_to_store_registers) (record_full_beneath_to_xfer_partial_ops) (record_full_beneath_to_xfer_partial) (record_full_beneath_to_insert_breakpoint_ops) (record_full_beneath_to_insert_breakpoint) (record_full_beneath_to_remove_breakpoint_ops) (record_full_beneath_to_remove_breakpoint) (record_full_beneath_to_stopped_by_watchpoint) (record_full_beneath_to_stopped_data_address) (record_full_beneath_to_async, tmp_to_resume_ops, tmp_to_resume) (tmp_to_wait_ops, tmp_to_wait, tmp_to_store_registers_ops) (tmp_to_store_registers, tmp_to_xfer_partial_ops) (tmp_to_xfer_partial, tmp_to_instmp_to_insert_breakpoint_ops) (tmp_to_insert_breakpoint, tmp_to_remove_breakpoint_ops) (tmp_to_remove_breakpoint, tmp_to_stopped_by_watchpoint) (tmp_to_stopped_data_address, tmp_to_async): Remove. (record_full_open_1, record_full_open): Update. Use RECORD_IS_USED. (record_full_resume, record_full_wait_1) (record_full_stopped_by_watchpoint, record_full_stopped_data_address) (record_full_store_registers, record_full_xfer_partial) (record_full_insert_breakpoint, record_full_remove_breakpoint) (record_full_async, record_full_core_xfer_partial): Use target delegation. * target-delegates.c: Rebuild. * target.c (current_xfer_partial): Remove. (update_current_target): Do not INHERIT or de_fault to_insert_breakpoint, to_remove_breakpoint, to_stopped_data_address, to_stopped_by_watchpoint, to_can_async_p, to_is_async_p, to_async. Do not set to_xfer_partial field. (default_xfer_partial): Simplify. (current_xfer_partial): Remove. (target_wait, target_resume): Simplify. (find_default_can_async_p, find_default_is_async_p): Update. (init_dummy_target): Don't set to_can_async_p, to_is_async_p, to_xfer_partial, to_stopped_by_watchpoint, to_stopped_data_address. (target_store_registers): Simplify. (forward_target_remove_breakpoint) (forward_target_insert_breakpoint): Remove. (target_remove_breakpoint, target_insert_breakpoint) (debug_to_insert_breakpoint, debug_to_remove_breakpoint): Update. * target.h (struct target_ops) : Add TARGET_DEFAULT markup. (forward_target_remove_breakpoint) (forward_target_insert_breakpoint): Remove. * record-btrace.c (record_btrace_remove_breakpoint): Delegate directly. (record_btrace_insert_breakpoint): Delegate directly. 2014-02-19 Tom Tromey PR build/7701: * target-delegates.c: New file. * target.c: Include target-delegates.c. (init_dummy_target): Call install_dummy_methods. (complete_target_initialization): Call install_delegators. * target.h (TARGET_DEFAULT_IGNORE, TARGET_DEFAULT_NORETURN) (TARGET_DEFAULT_RETURN, TARGET_DEFAULT_FUNC): New defines. * make-target-delegates: New file. 2014-02-19 Tom Tromey * record.c (find_record_target): Use find_target_at. * target.c (find_target_at): New function. * target.h (find_target_at): Declare. 2014-02-19 Tom Tromey * aarch64-linux-nat.c (aarch64_linux_stopped_by_watchpoint): Add 'ops' argument. * arm-linux-nat.c (arm_linux_stopped_by_watchpoint): Add 'ops' argument. * i386-nat.c (i386_stopped_by_watchpoint): Add 'ops' argument. * ia64-linux-nat.c (ia64_linux_stopped_by_watchpoint): Add 'ops' argument. * inf-ttrace.c (inf_ttrace_stopped_by_watchpoint): Add 'ops' argument. * linux-nat.c (save_sigtrap): Update. (linux_nat_stopped_by_watchpoint, linux_nat_is_async_p) (linux_nat_can_async_p, linux_nat_async): Add 'ops' argument. (linux_nat_close): Update. * mips-linux-nat.c (mips_linux_stopped_by_watchpoint): Add 'ops' argument. * ppc-linux-nat.c (ppc_linux_stopped_by_watchpoint): Add 'ops' argument. * procfs.c (procfs_stopped_by_watchpoint): Add 'ops' argument. * record-full.c (record_full_beneath_to_stopped_by_watchpoint) (record_full_beneath_to_async, tmp_to_stopped_by_watchpoint) (tmp_to_async): Add 'ops' argument. (record_full_stopped_by_watchpoint, record_full_async) (record_full_can_async_p, record_full_is_async_p): Add 'ops' argument. * remote-m32r-sdi.c (m32r_insert_breakpoint, m32r_remove_breakpoint) (m32r_stopped_by_watchpoint): Add 'ops' argument. * remote-mips.c (mips_stopped_by_watchpoint): Add 'ops' argument. * remote.c (remote_stopped_by_watchpoint_p, remote_can_async_p) (remote_is_async_p, remote_async): Add 'ops' argument. (remote_stopped_data_address): Update. * s390-nat.c (s390_stopped_by_watchpoint): Add 'ops' argument. * target.c (update_current_target) (find_default_can_async_p, find_default_is_async_p): Update. (init_dummy_target): Update. (debug_to_stopped_by_watchpoint): Add 'ops' argument. * target.h (struct target_ops) : Add 'ops' argument. (target_can_async_p, target_is_async_p, target_async) (target_stopped_by_watchpoint): Update. 2014-02-19 Yao Qi PR gdb/16220 * gdbarch.sh: Remove startup_gdbarch. * gdbarch.c: Regenerated. * gdbarch.h: Likewise. 2014-02-17 Kevin Buettner * rl78-tdep.c (rl78_g10_register_name): New function. (rl78_return_value): Add g10 support. (rl78_gdbarch_init): Register rl78_g10_register_name for the g10. 2014-02-17 Doug Evans * Makefile.in (SUBDIR_GUILE_OBS): Resort alphabetically. (SUBDIR_GUILE_SRCS): Ditto. (scm-gsmob.o): Ditto. 2014-02-17 Yao Qi * gnu-nat.c (ILL_RPC): Declare defined function. 2014-02-17 Yao Qi * gnu-nat.c (gnu_read_inferior): Change 'copy_count' type to mach_msg_type_number_t. (gnu_write_inferior): Likewise. 2014-02-17 Yao Qi * gnu-nat.c (proc_get_exception_port): Use 'lu' insetad of 'd' in format string. (proc_steal_exc_port, make_proc, inf_set_pid): Likewise. (inf_validate_procs, inf_signal): Likewise. (S_exception_raise_request): Likewise. (do_mach_notify_dead_name): Likewise. (steal_exc_port): Likewise. (gnu_read_inferior): Change 'copy_count''s type to mach_msg_type_number_t. (gnu_write_inferior): Likewise. Use 'lx' instead of 'x' in format string. 2014-02-16 Thomas Schwinge * gnu-nat.c (struct inf): Change pending_execs member to a 1-bit flag. Adjust all users; in particular... (gnu_wait): ..., don't decrement its value in here... (gnu_create_inferior): ..., and instead set the flag in here, around the startup_inferior call, and call that one with START_INFERIOR_TRAPS_EXPECTED. * gnu-nat.c (ill_rpc): Remove function; replaced with this... (ILL_RPC): ... new macro. (do_mach_notify_no_senders, do_mach_notify_port_deleted) (do_mach_notify_msg_accepted, do_mach_notify_port_destroyed) (do_mach_notify_send_once, S_proc_setmsgport_reply) (S_proc_getmsgport_reply, S_msg_sig_post_reply): Generate stub functions with ILL_RPC macro. (S_proc_pid2task_reply, S_proc_task2pid_reply) (S_proc_task2proc_reply, S_proc_proc2task_reply) (S_proc_pid2proc_reply, S_proc_getprocinfo_reply) (S_proc_getprocargs_reply, S_proc_getprocenv_reply) (S_proc_getloginid_reply, S_proc_getloginpids_reply) (S_proc_getlogin_reply, S_proc_getsid_reply) (S_proc_getsessionpgids_reply, S_proc_getsessionpids_reply) (S_proc_getsidport_reply, S_proc_getpgrp_reply) (S_proc_getpgrppids_reply, S_proc_get_tty_reply) (S_proc_getnports_reply, S_proc_is_important_reply) (S_proc_get_code_reply): New stub functions, generated with ILL_RPC macro. * reply_mig_hack.awk: In phase 5, keep going if we have not yet collected the type check structures. * reply_mig_hack.awk: Don't expect to see the auto keyword. 2014-02-14 Doug Evans * target.c (target_write_partial): Fix result type. 2014-02-14 Jose E. Marchesi * sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Register the proper offsets to access fpregset_t. 2014-02-13 Sanimir Agovic * cris-tdep.c (cris_supply_gregset): Remove zerobuf. (_initialize_cris_tdep): Remove cris_set_cmdlist, cris_show_cmdlist. * h8300-tdep.c (setmachinelist): Remove global. * hppa-tdep.c (hppa_sigtramp): Remove global. * mipsnbsd-tdep.c (sigtramp_retcode_mipsel, sigtramp_retcode_mipseb RETCODE_NWORDS, RETCODE_SIZE): Wrap code with #if 0. * ravenscar-thread.c (update_target_observer): Remove global. * rs6000-tdep.c (rs6000_gdbarch_init): Remove segment_regs. 2014-02-12 Tom Tromey * common/rsp-low.c: Update comments. * common/rsp-low.h: Update comments. 2014-02-12 Tom Tromey * common/rsp-low.c (convert_ascii_to_int): Remove. * common/rsp-low.h (convert_ascii_to_int): Don't declare. 2014-02-12 Tom Tromey * common/rsp-low.h (unhexify): Don't declare. * common/rsp-low.c (unhexify): Remove. 2014-02-12 Tom Tromey * common/rsp-low.h (convert_int_to_ascii): Don't declare. * common/rsp-low.c (convert_int_to_ascii): Remove. 2014-02-12 Tom Tromey * common/rsp-low.h (hexify): Don't declare. * common/rsp-low.c (hexify): Remove. 2014-02-12 Tom Tromey * common/rsp-low.c (hexify): Never take strlen of argument. 2014-02-12 Tom Tromey * common/rsp-low.c (bin2hex): Never take strlen of argument. * remote.c (extended_remote_run, remote_rcmd) (remote_download_trace_state_variable, remote_save_trace_data) (remote_set_trace_notes): Update. * tracepoint.c (encode_source_string, tfile_write_status) (tfile_write_uploaded_tsv): Update. 2014-02-12 Tom Tromey * tracepoint.c: Include rsp-low.h. * remote.h (hex2bin, bin2hex, unpack_varlen_hex): Don't declare. * remote.c: Include rsp-low.h. (hexchars, ishex, unpack_varlen_hex, pack_nibble, pack_hex_byte) (fromhex, hex2bin, tohex, bin2hex, remote_escape_output) (remote_unescape_input): Move to common/rsp-low.c. * common/rsp-low.h: New file. * common/rsp-low.c: New file. * Makefile.in (SFILES): Add common/rsp-low.c. (HFILES_NO_SRCDIR): Add common/rsp-low.h. (COMMON_OBS): Add rsp-low.o. (rsp-low.o): New target. 2014-02-12 Tom Tromey * utils.h: Include print-utils.h. (host_address_to_string, plongest, pulongest, phex, phex_nz) (int_string, core_addr_to_string, core_addr_to_string_nz) (hex_string, hex_string_custom): Don't declare. * utils.c (NUMCELLS, CELLSIZE, get_cell, decimal2str, pulongest) (plongest, thirty_two, phex, phex_nz, octal2str, hex_string) (hex_string_custom, int_string, core_addr_to_string) (core_addr_to_string_nz, host_address_to_string): Move to common/print-utils.c. * common/print-utils.h: New file. * common/print-utils.c: New file * Makefile.in (SFILES): Add common/print-utils.c. (HFILES_NO_SRCDIR): Add common/print-utils.h. (COMMON_OBS): Add print-utils.o. (print-utils.o): New target. 2014-02-12 Tom Tromey * nios2-tdep.c (nios2_stub_frame_base_address): Remove. 2014-02-12 Mark Kettenis * sparc64obsd-tdep.c (sparc64obsd_init_abi): Call obsd_init_abi. 2014-02-12 Mark Kettenis * inf-ptrace.c (inf_ptrace_xfer_partial): Return TARGET_XFER_EOF if a PT_IO ptrace request returns sucessfully but indicates that 0 bytes were transferred. 2014-02-12 Pedro Alves Kevin Buettner * gnu-v3-abi.c (build_gdb_vtable_type): Return a type marked with TYPE_INSTANCE_FLAG_CODE_SPACE. 2014-02-12 Pedro Alves * h8300-tdep.c (pseudo_from_raw_register) (raw_from_pseudo_register): New functions. (h8300_pseudo_register_read, h8300_pseudo_register_write): Use them. 2014-02-12 Pedro Alves * h8300-tdep.c (h8300_register_sim_regno): New function. (h8300_gdbarch_init): Install h8300_register_sim_regno as gdbarch_register_sim_regno hook. 2014-02-12 Sanimir Agovic * nios2-tdep.c (nios2_stub_frame_base): Remove global. 2014-02-12 Sanimir Agovic * tic6x-tdep.c (tic6x_gdbarch_init): Call frame_base_set_default. 2014-02-12 Mark Kettenis * obsd-tdep.h (obsd_init_abi): New prototype. * obsd-tdep.c: Define enum with OpenBSD signal numbers. (obsd_gdb_signal_from_target, obsd_gdb_signal_to_target) (obsd_init_abi): New functions. * i386obsd-tdep.c: Include "obsd-tdep.h". (i386obsd_init_abi): Call obsd_init_abi. * amd64obsd-tdep.c: Include "obsd-tdep.h". (amd64obsd_init_abi): Call obsd_init_abi. * configure.tgt (i[34567]86-*-openbsd*, x86_64-*-openbsd*): Add obsd-tdep.c to gdb_target_obs. 2014-02-11 Jose E. Marchesi * sparc64-tdep.c (sparc64_store_arguments): Do not align complex double float arguments to 16-byte in the argument slots. 2014-02-11 Doug Evans * configure.ac: Don't crash if pkg-config is not found and guile wasn't explicitly requested. Use AC_MSG_ERROR instead of AC_ERROR in guile checks. * configure: Regenerate. 2014-02-11 Yao Qi * aix-thread.c (aix_thread_xfer_partial): Update comments. * auxv.c (procfs_xfer_auxv, memory_xfer_auxv): Likewise. * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise. * gnu-nat.c (gnu_xfer_memory): Likewise. * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise. * rs6000-nat.c (rs6000_xfer_partial): Likewise. * sparc-nat.c (sparc_xfer_wcookie): Likewise. * spu-linux-nat.c (spu_proc_xfer_spu): Likewise. 2014-02-11 Yao Qi * target.h (enum target_xfer_error): Rename to ... (enum target_xfer_status): ... it. New. All users updated. (enum target_xfer_status) , : New. (TARGET_XFER_STATUS_ERROR_P): New macro. (target_xfer_error_to_string): Remove declaration. (target_xfer_status_to_string): Declare. (target_xfer_partial_ftype): Adjust it. (struct target_ops) : Return target_xfer_status. Add argument xfered_len. Update comments. * target.c (target_xfer_error_to_string): Rename to ... (target_xfer_status_to_string): ... it. New. All callers updated. (target_read_live_memory): Likewise. Call target_xfer_partial instead of target_read. (memory_xfer_live_readonly_partial): Return target_xfer_status. Add argument xfered_len. (raw_memory_xfer_partial): Likewise. (memory_xfer_partial_1): Likewise. (memory_xfer_partial): Likewise. (target_xfer_partial): Likewise. Check *XFERED_LEN is set properly. Update debug message. (default_xfer_partial, current_xfer_partial): Likewise. (target_write_partial): Likewise. (target_read_partial): Likewise. All callers updated. (read_whatever_is_readable): Likewise. (target_write_with_progress): Likewise. (target_read_alloc_1): Likewise. * aix-thread.c (aix_thread_xfer_partial): Likewise. * auxv.c (procfs_xfer_auxv): Likewise. (ld_so_xfer_auxv, memory_xfer_auxv): Likewise. * bfd-target.c (target_bfd_xfer_partial): Likewise. * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise. * bsd-uthread.c (bsd_uthread_xfer_partia): Likewise. * corefile.c (read_memory): Adjust. * corelow.c (core_xfer_partial): Likewise. * ctf.c (ctf_xfer_partial): Likewise. * darwin-nat.c (darwin_read_dyld_info): Likewise. All callers updated. (darwin_xfer_partial): Likewise. * exec.c (section_table_xfer_memory_partial): Likewise. All callers updated. (exec_xfer_partial): Likewise. * exec.h (section_table_xfer_memory_partial): Update declaration. * gnu-nat.c (gnu_xfer_memory): Likewise. Assert 'res' is not negative. (gnu_xfer_partial): Likewise. * ia64-hpux-nat.c (ia64_hpux_xfer_memory_no_bs): Likewise. (ia64_hpux_xfer_memory, ia64_hpux_xfer_uregs): Likewise. (ia64_hpux_xfer_solib_got): Likewise. * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise. Change type of 'partial_len' to ULONGEST. * inf-ttrace.c (inf_ttrace_xfer_partial): Likewise. * linux-nat.c (linux_xfer_siginfo ): Likewise. (linux_nat_xfer_partial): Likewise. (linux_proc_xfer_partial, linux_xfer_partial): Likewise. (linux_proc_xfer_spu, linux_nat_xfer_osdata): Likewise. * monitor.c (monitor_xfer_memory): Likewise. (monitor_xfer_partial): Likewise. * procfs.c (procfs_xfer_partial): Likewise. * record-btrace.c (record_btrace_xfer_partial): Likewise. * record-full.c (record_full_xfer_partial): Likewise. (record_full_core_xfer_partial): Likewise. * remote-sim.c (gdbsim_xfer_memory): Likewise. (gdbsim_xfer_partial): Likewise. * remote.c (remote_write_bytes_aux): Likewise. All callers updated. (remote_write_bytes, remote_read_bytes): Likewise. All callers updated. (remote_flash_erase): Likewise. All callers updated. (remote_write_qxfer): Likewise. All callers updated. (remote_read_qxfer): Likewise. All callers updated. (remote_xfer_partial): Likewise. * rs6000-nat.c (rs6000_xfer_partial): Likewise. (rs6000_xfer_shared_libraries): Likewise. * sol-thread.c (sol_thread_xfer_partial): Likewise. (sol_thread_xfer_partial): Likewise. * sparc-nat.c (sparc_xfer_wcookie): Likewise. (sparc_xfer_partial): Likewise. * spu-linux-nat.c (spu_proc_xfer_spu): Likewise. All callers updated. (spu_xfer_partial): Likewise. * spu-multiarch.c (spu_xfer_partial): Likewise. * tracepoint.c (tfile_xfer_partial): Likewise. * windows-nat.c (windows_xfer_memory): Likewise. (windows_xfer_shared_libraries): Likewise. (windows_xfer_partial): Likewise. * valprint.c: Replace 'target_xfer_error' with 'target_xfer_status' in comments. 2014-02-11 Simon Marchi (tiny patch) Checked in by Joel Brobecker . * mi/mi-main.c (mi_cmd_data_write_memory_bytes): Fix comment. 2014-02-11 Joel Brobecker * symfile-debug.c (debug_qf_expand_symtabs_matching): Reformat function parameters. 2014-02-10 Will Newton * elfread.c (elf_rel_plt_read): Look for a .got section if looking up .got.plt fails. (elf_gnu_ifunc_resolve_by_got): Call gdbarch_addr_bits_remove on address passed to elf_gnu_ifunc_record_cache. (elf_gnu_ifunc_resolve_addr): Likewise. (elf_gnu_ifunc_resolver_return_stop): Likewise. 2014-02-10 Jose E. Marchesi * sparc-tdep.c (sparc_in_function_epilogue_p): New function. (X_RETTURN): New macro. * sparc-tdep.h: sparc_in_function_epilogue_p prototype. * sparc64-tdep.c (sparc64_init_abi): Hook sparc_in_function_epilogue_p. 2014-02-10 Gary Benson * symfile-debug.c (debug_qf_expand_symtabs_matching): Rename name_matcher to symbol_matcher. 2014-02-10 Gary Benson * symfile-debug.c (debug_qf_expand_symtabs_matching): Use expand_symtabs_file_matcher_ftype and expand_symtabs_symbol_matcher_ftype. 2014-02-10 Joel Brobecker * ada-lang.c (struct cache_entry, HASH_SIZE): Move definition up. (struct ada_symbol_cache): New. (ada_free_symbol_cache): Forward declare. (struct ada_pspace_data): New. (ada_pspace_data_handle): New static global. (get_ada_pspace_data, ada_pspace_data_cleanup) (ada_init_symbol_cache, ada_free_symbol_cache): New functions. (cache_space, cache): Delete, now folded inside struct ada_pspace_data. (ada_get_symbol_cache): New function. (ada_clear_symbol_cache, find_entry, cache_symbol): Adjust implementation. (_initialize_ada_language): Remove initialization of cache_space. Move call to observer_attach_inferior_exit up, grouping it with the other observer registrations inside this function. Rename command to be more general. Add call to register_program_space_data_with_cleanup. 2014-02-10 Joel Brobecker * ada-tasks.c (ada_tasks_new_objfile_observer): Renames ada_new_objfile_observer. (ada_tasks_normal_stop_observer): Renames ada_normal_stop_observer. (_initialize_tasks): Update uses of ada_new_objfile_observer and ada_tasks_normal_stop_observer. 2014-02-10 Joel Brobecker * ada-lang.c (ada_evaluate_subexp): Set the type of the value returned by the 'Length attribute to integer. 2014-02-10 Joel Brobecker * ada-lang.c (_initialize_ada_language): Initialize cache_space obstack. 2014-02-10 Joel Brobecker * ada-lang.c (HASH_SIZE): New macro. (struct cache_entry): New type. (cache_space, cache): New static globals. (ada_clear_symbol_cache, find_entry): New functions. (lookup_cached_symbol, cache_symbol): Implement. (ada_new_objfile_observer, ada_free_objfile_observer): New. (_initialize_ada_language): Attach ada_new_objfile_observer and ada_free_objfile_observer. 2014-02-10 Joel Brobecker * ada-lang.c (ada_add_block_symbols, add_defn_to_vec) (lookup_cached_symbol, ada_add_local_symbols): Add "const" to struct block * parameter. (ada_lookup_symbol_list_worker): Constify local variable "block". Remove cast which is no longer necessary. 2014-02-10 Doug Evans Add Guile as an extension language. * NEWS: Mention Guile scripting. * Makefile.in (SUBDIR_GUILE_OBS): New variable. (SUBDIR_GUILE_SRCS, SUBDIR_GUILE_DEPS): New variables (SUBDIR_GUILE_LDFLAGS, SUBDIR_GUILE_CFLAGS): New variables. (INTERNAL_CPPFLAGS): Add GUILE_CPPFLAGS. (CLIBS): Add GUILE_LIBS. (install-guile): New rule. (guile.o): New rule. (scm-arch.o, scm-auto-load.o, scm-block.o): New rules. (scm-breakpoint.o, scm-disasm.o, scm-exception.o): New rules. (scm-frame.o, scm-iterator.o, scm-lazy-string.o): New rules. (scm-math.o, scm-objfile.o, scm-ports.o): New rules. (scm-pretty-print.o, scm-safe-call.o, scm-gsmob.o): New rules. (scm-string.o, scm-symbol.o, scm-symtab.o): New rules. (scm-type.o, scm-utils.o, scm-value.o): New rules. * configure.ac: New option --with-guile. * configure: Regenerate. * config.in: Regenerate. * auto-load.c: Remove #include "python/python.h". Add #include "gdb/section-scripts.h". (source_section_scripts): Handle Guile scripts. (_initialize_auto_load): Add name of Guile objfile script to scripts-directory help text. * breakpoint.c (condition_command): Tweak comment to include Scheme. * breakpoint.h (gdbscm_breakpoint_object): Add forward decl. (struct breakpoint): New member scm_bp_object. * defs.h (enum command_control_type): New value guile_control. * cli/cli-cmds.c: Remove #include "python/python.h". Add #include "extension.h". (show_user): Update comment. (_initialize_cli_cmds): Update help text for "show user". Update help text for max-user-call-depth. * cli/cli-script.c: Remove #include "python/python.h". Add #include "extension.h". (multi_line_command_p): Add guile_control. (print_command_lines): Handle guile_control. (execute_control_command, recurse_read_control_structure): Ditto. (process_next_line): Recognize "guile" commands. * disasm.c (gdb_disassemble_info): Make non-static. * disasm.h: #include "dis-asm.h". (struct gdbarch): Add forward decl. (gdb_disassemble_info): Declare. * extension.c: #include "guile/guile.h". (extension_languages): Add guile. (get_ext_lang_defn): Handle EXT_LANG_GDB. * extension.h (enum extension_language): New value EXT_LANG_GUILE. * gdbtypes.c (get_unsigned_type_max): New function. (get_signed_type_minmax): New function. * gdbtypes.h (get_unsigned_type_max): Declare. (get_signed_type_minmax): Declare. * guile/README: New file. * guile/guile-internal.h: New file. * guile/guile.c: New file. * guile/guile.h: New file. * guile/scm-arch.c: New file. * guile/scm-auto-load.c: New file. * guile/scm-block.c: New file. * guile/scm-breakpoint.c: New file. * guile/scm-disasm.c: New file. * guile/scm-exception.c: New file. * guile/scm-frame.c: New file. * guile/scm-gsmob.c: New file. * guile/scm-iterator.c: New file. * guile/scm-lazy-string.c: New file. * guile/scm-math.c: New file. * guile/scm-objfile.c: New file. * guile/scm-ports.c: New file. * guile/scm-pretty-print.c: New file. * guile/scm-safe-call.c: New file. * guile/scm-string.c: New file. * guile/scm-symbol.c: New file. * guile/scm-symtab.c: New file. * guile/scm-type.c: New file. * guile/scm-utils.c: New file. * guile/scm-value.c: New file. * guile/lib/gdb.scm: New file. * guile/lib/gdb/boot.scm: New file. * guile/lib/gdb/experimental.scm: New file. * guile/lib/gdb/init.scm: New file. * guile/lib/gdb/iterator.scm: New file. * guile/lib/gdb/printing.scm: New file. * guile/lib/gdb/types.scm: New file. * data-directory/Makefile.in (GUILE_SRCDIR): New variable. (VPATH): Add $(GUILE_SRCDIR). (GUILE_DIR): New variable. (GUILE_INSTALL_DIR, GUILE_FILES): New variables. (all): Add stamp-guile dependency. (stamp-guile): New rule. (clean-guile, install-guile, uninstall-guile): New rules. (install-only): Add install-guile dependency. (uninstall): Add uninstall-guile dependency. (clean): Add clean-guile dependency. 2014-02-09 Doug Evans Revert this patch (which I approved, mea culpa). 2014-02-08 Mark Kettenis * Makefile.in (all-lib): Remove. ($(LIBGNU) $(GNULIB_H)): Replace with gits of remove all-lib target. 2014-02-09 Jan Kratochvil Fix Python stack corruption. * python/py-linetable.c (ltpy_get_pcs_for_line, ltpy_has_line): Use gdb_py_longest. 2014-02-08 Mark Kettenis * Makefile.in (all-lib): Remove. ($(LIBGNU) $(GNULIB_H)): Replace with gits of remove all-lib target. 2014-02-07 Doug Evans * extension-priv.h (extension_language_script_ops): Add comment. (extension_language_ops): Add comment. (active_ext_lang_state): Fix typo in comment. 2014-02-07 Pedro Alves PR breakpoints/16292 * infrun.c (handle_signal_stop) : Switch back to the stepping thread. 2014-02-07 Yao Qi * target.c (target_xfer_partial): Return zero if LEN is zero. 2014-02-07 Yao Qi * auxv.c (procfs_xfer_auxv): Replace -1 with TARGET_XFER_E_IO. (ld_so_xfer_auxv): Likewise. * bfd-target.c (target_bfd_xfer_partial): Likewise. * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise. * corelow.c (core_xfer_partial): Likewise. * ctf.c (ctf_xfer_partial): Likewise. * darwin-nat.c (darwin_read_dyld_info): Likewise. (darwin_xfer_partial): Likewise. * exec.c (exec_xfer_partial): Likewise. * gnu-nat.c (gnu_xfer_partial): Likewise. * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): Likewise. * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise. * inf-ttrace.c (inf_ttrace_xfer_partial): Likewise. * linux-nat.c (linux_xfer_siginfo): Likewise. (linux_proc_xfer_spu): Likewise. * procfs.c (procfs_xfer_partial): Likewise. * record-full.c (record_full_xfer_partial): Likewise. (record_full_core_xfer_partial): Likewise. * remote-sim.c (gdbsim_xfer_partial): Likewise. * remote.c (remote_write_qxfer): Likewise. (remote_write_qxfer, remote_read_qxfer): Likewise. (remote_xfer_partial): Likewise. * rs6000-nat.c (rs6000_xfer_partial): Likewise. (rs6000_xfer_shared_libraries): Likewise. * sparc-nat.c (sparc_xfer_wcookie): Likewise. * spu-linux-nat.c (spu_proc_xfer_spu): Likewise. (spu_xfer_partial): Likewise. * target.c (memory_xfer_partial_1): Likewise. * tracepoint.c (tfile_xfer_partial): Likewise. * windows-nat.c (windows_xfer_shared_libraries): Likewise. (windows_xfer_partial): Likewise. 2014-02-07 Yao Qi * gdbarch.sh (core_xfer_shared_libraries): Returns ULONGEST. Add comments. (core_xfer_shared_libraries_aix): Likewise. * gdbarch.c, gdbarch.h: Regenerated. * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries): Return ULONGEST. Change 'len_avail' type to ULONGEST. * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise. * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update declaration. (rs6000_aix_core_xfer_shared_libraries_aix): Return ULONGEST. 2014-02-07 Yao Qi * corefile.c (memory_error): Get 'exception' from ERR and pass 'exception' to throw_error. 2014-02-06 Doug Evans * configure.ac (libpython checking): Remove all but python.o from CONFIG_OBS. Remove all but python.c from CONFIG_SRCS. * configure: Regenerate. * Makefile.in (SFILES): Add extension.c. (HFILES_NO_SRCDIR): Add extension.h, extension-priv.h (COMMON_OBS): Add extension.o. * extension.h: New file. * extension-priv.h: New file. * extension.c: New file. * python/python-internal.h: #include "extension.h". (gdbpy_auto_load_enabled): Declare. (gdbpy_apply_val_pretty_printer): Declare. (gdbpy_apply_frame_filter): Declare. (gdbpy_preserve_values): Declare. (gdbpy_breakpoint_cond_says_stop): Declare. (gdbpy_breakpoint_has_cond): Declare. (void source_python_script_for_objfile): Delete. * python/python.c: #include "extension-priv.h". Delete inclusion of "observer.h". (extension_language_python): Moved here and renamed from script_language_python in py-auto-load.c. Redefined to be of type extension_language_defn. (python_extension_script_ops): New global. (python_extension_ops): New global. (struct python_env): New member previous_active. (restore_python_env): Call restore_active_ext_lang. (ensure_python_env): Call set_active_ext_lang. (gdbpy_clear_quit_flag): Renamed from clear_quit_flag, made static. New arg extlang. (gdbpy_set_quit_flag): Renamed from set_quit_flag, made static. New arg extlang. (gdbpy_check_quit_flag): Renamed from check_quit_flag, made static. New arg extlang. (gdbpy_eval_from_control_command): Renamed from eval_python_from_control_command, made static. New arg extlang. (gdbpy_source_script) Renamed from source_python_script, made static. New arg extlang. (gdbpy_before_prompt_hook): Renamed from before_prompt_hook. Change result to int. New arg extlang. (gdbpy_source_objfile_script): Renamed from source_python_script_for_objfile, made static. New arg extlang. (gdbpy_start_type_printers): Renamed from start_type_printers, made static. New args extlang, extlang_printers. Change result type to "void". (gdbpy_apply_type_printers): Renamed from apply_type_printers, made static. New arg extlang. Rename arg printers to extlang_printers and change type to ext_lang_type_printers *. (gdbpy_free_type_printers): Renamed from free_type_printers, made static. Replace argument arg with extlang, extlang_printers. (!HAVE_PYTHON, eval_python_from_control_command): Delete. (!HAVE_PYTHON, source_python_script): Delete. (!HAVE_PYTHON, gdbpy_should_stop): Delete. (!HAVE_PYTHON, gdbpy_breakpoint_has_py_cond): Delete. (!HAVE_PYTHON, start_type_printers): Delete. (!HAVE_PYTHON, apply_type_printers): Delete. (!HAVE_PYTHON, free_type_printers): Delete. (_initialize_python): Delete call to observer_attach_before_prompt. (finalize_python): Set/restore active extension language. (gdbpy_finish_initialization) Renamed from finish_python_initialization, made static. New arg extlang. (gdbpy_initialized): New function. * python/python.h: #include "extension.h". Delete #include "value.h", "mi/mi-cmds.h". (extension_language_python): Declare. (GDBPY_AUTO_FILE_NAME): Delete. (enum py_bt_status): Moved to extension.h and renamed to ext_lang_bt_status. (enum frame_filter_flags): Moved to extension.h. (enum py_frame_args): Moved to extension.h and renamed to ext_lang_frame_args. (finish_python_initialization): Delete. (eval_python_from_control_command): Delete. (source_python_script): Delete. (apply_val_pretty_printer): Delete. (apply_frame_filter): Delete. (preserve_python_values): Delete. (gdbpy_script_language_defn): Delete. (gdbpy_should_stop, gdbpy_breakpoint_has_py_cond): Delete. (start_type_printers, apply_type_printers, free_type_printers): Delete. * auto-load.c: #include "extension.h". (GDB_AUTO_FILE_NAME): Delete. (auto_load_gdb_scripts_enabled): Make public. New arg extlang. (script_language_gdb): Delete, moved to extension.c and renamed to extension_language_gdb. (source_gdb_script_for_objfile): Delete. (auto_load_pspace_info): New member unsupported_script_warning_printed. (loaded_script): Change type of language member to struct extension_language_defn *. (init_loaded_scripts_info): Initialize unsupported_script_warning_printed. (maybe_add_script): Make static. Change type of language arg to struct extension_language_defn *. (clear_section_scripts): Reset unsupported_script_warning_printed. (auto_load_objfile_script_1): Rewrite to use extension language API. (auto_load_objfile_script): Make public. Remove support-compiled-in and auto-load-enabled checks, moved to auto_load_scripts_for_objfile. (source_section_scripts): Rewrite to use extension language API. (load_auto_scripts_for_objfile): Rewrite to use auto_load_scripts_for_objfile. (collect_matching_scripts_data): Change type of language member to struct extension_language_defn *. (auto_load_info_scripts): Change type of language arg to struct extension_language_defn *. (unsupported_script_warning_print): New function. (script_not_found_warning_print): Make static. (_initialize_auto_load): Rewrite construction of scripts-directory help. * auto-load.h (struct objfile): Add forward decl. (struct script_language): Delete. (struct auto_load_pspace_info): Add forward decl. (struct extension_language_defn): Add forward decl. (maybe_add_script): Delete. (auto_load_objfile_script): Declare. (script_not_found_warning_print): Delete. (auto_load_info_scripts): Update prototype. (auto_load_gdb_scripts_enabled): Declare. * python/py-auto-load.c (gdbpy_auto_load_enabled): Renamed from auto_load_python_scripts_enabled and made public. (script_language_python): Delete, moved to python.c. (gdbpy_script_language_defn): Delete. (info_auto_load_python_scripts): Update to use extension_language_python. * breakpoint.c (condition_command): Replace call to gdbpy_breakpoint_has_py_cond with call to get_breakpoint_cond_ext_lang. (bpstat_check_breakpoint_conditions): Replace call to gdbpy_should_stop with call to breakpoint_ext_lang_cond_says_stop. * python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed from gdbpy_should_stop. Change result type to enum scr_bp_stop. New arg slang. Return SCR_BP_STOP_UNSET if py_bp_object is NULL. (gdbpy_breakpoint_has_cond): Renamed from gdbpy_breakpoint_has_py_cond. New arg slang. (local_setattro): Print name of extension language with existing stop condition. * valprint.c (val_print, value_print): Update to call apply_ext_lang_val_pretty_printer. * cp-valprint.c (cp_print_value): Update call to apply_ext_lang_val_pretty_printer. * python/py-prettyprint.c: Remove #ifdef HAVE_PYTHON. (gdbpy_apply_val_pretty_printer): Renamed from apply_val_pretty_printer. New arg extlang. (!HAVE_PYTHON, apply_val_pretty_printer): Delete. * cli/cli-cmds.c (source_script_from_stream): Rewrite to use extension language API. * cli/cli-script.c (execute_control_command): Update to call eval_ext_lang_from_control_command. * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Update to use enum ext_lang_bt_status values. Update call to apply_ext_lang_frame_filter. (mi_cmd_stack_list_locals): Ditto. (mi_cmd_stack_list_args): Ditto. (mi_cmd_stack_list_variables): Ditto. * mi/mi-main.c: Delete #include "python/python-internal.h". Add #include "extension.h". (mi_cmd_list_features): Replace reference to python internal variable gdb_python_initialized with call to ext_lang_initialized_p. * stack.c (backtrace_command_1): Update to use enum ext_lang_bt_status. Update to use enum ext_lang_frame_args. Update to call apply_ext_lang_frame_filter. * python/py-framefilter.c (extract_sym): Update to use enum ext_lang_bt_status. (extract_value, py_print_type, py_print_value): Ditto. (py_print_single_arg, enumerate_args, enumerate_locals): Ditto. (py_mi_print_variables, py_print_locals, py_print_args): Ditto. (py_print_frame): Ditto. (gdbpy_apply_frame_filter): Renamed from apply_frame_filter. New arg extlang. Update to use enum ext_lang_bt_status. * top.c (gdb_init): Delete #ifdef HAVE_PYTHON call to finish_python_initialization. Replace with call to finish_ext_lang_initialization. * typeprint.c (do_free_global_table): Update to call free_ext_lang_type_printers. (create_global_typedef_table): Update to call start_ext_lang_type_printers. (find_global_typedef): Update to call apply_ext_lang_type_printers. * typeprint.h (struct ext_lang_type_printers): Add forward decl. (type_print_options): Change type of global_printers from "void *" to "struct ext_lang_type_printers *". * value.c (preserve_values): Update to call preserve_ext_lang_values. * python/py-value.c: Remove #ifdef HAVE_PYTHON. (gdbpy_preserve_values): Renamed from preserve_python_values. New arg extlang. (!HAVE_PYTHON, preserve_python_values): Delete. * utils.c (quit_flag): Delete, moved to extension.c. (clear_quit_flag, set_quit_flag, check_quit_flag): Delete, moved to extension.c. * eval.c: Delete #include "python/python.h". * main.c: Delete #include "python/python.h". * defs.h: Update comment. 2014-02-06 Joel Brobecker GDB 7.7 released. 2014-02-05 Mark Kettenis * c-exp.y (YYPRINT, c_print_token): Only define if YYBISON is defined. 2014-02-05 Yao Qi * remote.c (remote_pass_signals): Remove local 'buf' and use rs->buf. (remote_program_signals): Likewise. 2014-02-05 Yao Qi * ctf.c: Include "inferior.h" and "gdbthread.h". (CTF_PID): A new macro. (ctf_open): Call inferior_appeared and add_thread_silent. (ctf_close): Call exit_inferior_silent and set inferior_ptid. (ctf_thread_alive): New function. (init_ctf_ops): Install ctf_thread_alive to to_thread_alive. 2014-02-05 Yao Qi Revert this patch: 2013-05-24 Yao Qi * tracepoint.c (TFILE_PID): Remove. (tfile_open): Don't add thread and inferior. (tfile_close): Don't set 'inferior_ptid'. Don't call exit_inferior_silent. (tfile_thread_alive): Remove. (init_tfile_ops): Don't set field 'to_thread_alive' of tfile_ops. 2014-02-04 Christian Eggers (tiny change) * remote.c (remote_start_remote): Call remote_check_symbols even if only symbol-file (not file) has been given. 2014-02-04 Ulrich Weigand  * gdbarch.sh (skip_entrypoint): New callback. * gdbarch.c, gdbarch.h: Regenerate. * symtab.c (skip_prologue_sal): Call gdbarch_skip_entrypoint. * infrun.c (fill_in_stop_func): Likewise. * ppc-linux-tdep.c: Include "elf/ppc64.h". (ppc_elfv2_elf_make_msymbol_special): New function. (ppc_elfv2_skip_entrypoint): Likewise. (ppc_linux_init_abi): Install them for ELFv2. 2014-02-04 Ulrich Weigand  * ppc-sysv-tdep.c (ppc64_aggregate_candidate): New routine. (ppc64_elfv2_abi_homogeneous_aggregate): Likewise. (ppc64_sysv_abi_push_param): Handle ELFv2 homogeneous structs. (ppc64_sysv_abi_return_value): Likewise. Also, handle small structures returned in GPRs. 2014-02-04 Ulrich Weigand  * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Use correct offset to the stack parameter list for the ELFv2 ABI. 2014-02-04 Ulrich Weigand  * ppc-linux-tdep.c (ppc_linux_init_abi): Only call set_gdbarch_convert_from_func_ptr_addr and set_gdbarch_elf_make_msymbol_special for ELFv1. * ppc-sysv-tdep.c (ppc64_sysv_abi_push_param): Only handle function descriptors on ELFv1. (ppc64_sysv_abi_push_dummy_call): Likewise. On ELFv2, set up r12 at function entry. 2014-02-04 Ulrich Weigand  * ppc-tdep.h (enum powerpc_elf_abi): New data type. (struct gdbarch_tdep): New member elf_abi. * rs6000-tdep.c: Include "elf/ppc64.h". (rs6000_gdbarch_init): Detect ELF ABI version. 2014-02-04 Ulrich Weigand  * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct order within a register pair holding a DFP 128-bit value on little-endian. (ppc64_sysv_abi_return_value_base): Likewise. * rs6000-tdep.c (dfp_pseudo_register_read): Likewise. (dfp_pseudo_register_write): Likewise. 2014-02-04 Ulrich Weigand  * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct offset on little-endian when passing _Decimal32. (ppc64_sysv_abi_return_value_base): Likewise for return values. 2014-02-04 Ulrich Weigand  * rs6000-tdep.c (efpr_pseudo_register_read): Use correct offset of the overlapped FP register within the VSX register on little- endian platforms. (efpr_pseudo_register_write): Likewise. 2014-02-04 Ulrich Weigand  * ppc-sysv-tdep.c (ppc64_sysv_abi_push_val): Use correct offset on little-endian when passing small structures. 2014-02-04 Ulrich Weigand  * ppc-sysv-tdep.c (get_decimal_float_return_value): Update comment. (struct ppc64_sysv_argpos): New data structure. (ppc64_sysv_abi_push_float): Remove. (ppc64_sysv_abi_push_val): New function. (ppc64_sysv_abi_push_integer): Likewise. (ppc64_sysv_abi_push_freg): Likewise. (ppc64_sysv_abi_push_vreg): Likewise. (ppc64_sysv_abi_push_param): Likewise. (ppc64_sysv_abi_push_dummy_call): Refactor to use those new routines. (ppc64_sysv_abi_return_value_base): New function. (ppc64_sysv_abi_return_value): Refactor to use it. 2014-02-04 Ulrich Weigand  * NEWS: Document new target powerpc64le-*-linux*. 2014-02-04 Mark Kettenis * sparc64obsd-tdep.c (sparc64obsd_gregset): New variable. (sparc64obsd_supply_gregset): Handle registers sets used in ELF core dumps. (sparc64obsd_init_abi): Adjust minimum size of the general purpose register set used in ELF core dumps. Add floating-point register set. 2014-02-03 Kevin Buettner * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Rewrite dwarf2_to_gdb[] table using symbolic constants. Adjust penultimate entry from number representing the PC register to symbolic constant representing the MDR register. Add constant for the PC register to the end of the table. 2014-02-03 Mark Kettenis * bsd-kvm.c: Include 2014-02-03 Mark Kettenis * sparc64nbsd-nat.c (sparc64nbsd_supply_fpregset): Fix prototype. 2014-01-31 Joel Brobecker * ada-lang.h (clear_ada_sym_cache): Delete. 2014-01-30 Ulrich Weigand  * auxv.c (fprint_target_auxv): Handle AT_HWCAP2. 2014-01-29 Jose E. Marchesi * sparc64-linux-tdep.c (sparc64_linux_step_trap): Get PC from the sigreturn register save area only if the syscall is sigreturn. 2014-01-29 Joel Brobecker * valops.c (value_slice): Minor reformatting. 2014-01-28 Ulrich Weigand  * ppc64-tdep.c (ppc64_standard_linkage7): Fix typo. 2014-01-28 Joel Brobecker * ada-lang.c (maint_set_ada_cmdlist, maint_show_ada_cmdlist): New static globals. (maint_set_ada_cmd, maint_show_ada_cmd): New functions. (ada_ignore_descriptive_types_p): New static global. (find_parallel_type_by_descriptive_type): Return immediately if ada_ignore_descriptive_types_p is set. (_initialize_ada_language): Register new commands "maintenance set ada", "maintenance show ada", "maintenance set ada ignore-descriptive-types" and "maintenance show ada ignore-descriptive-types". * NEWS: Add entry for new "maint ada set/show ignore-descriptive-types" commands. 2014-01-27 Markus Metzger * record-btrace.c (record_btrace_close): Call btrace_teardown for all threads. 2014-01-27 Joel Brobecker * ada-lang.c: Remove "#ifdef UI_OUT" condition for including "ui-out.h". 2014-01-27 Joel Brobecker * ada-typeprint (type_is_full_subrange_of_target_type): New function. (print_range): Add parameter bounds_prefered_p. If not set, try printing range types using the name of their base type. (print_range_type): Add parameter bounds_prefered_p. Use it in call to print_range. (print_array_type, ada_print_type): Update calls to print_range and print_range_type. 2014-01-27 Joel Brobecker * ada-typeprint.c (print_array_type, print_choices, print_range) (print_range_bound, print_dynamic_range_bound, print_range_type): Remove declaration. 2014-01-27 Joel Brobecker * ada-typeprint.c (print_range): Add missing empty line after local declaration. 2014-01-27 Joel Brobecker * ada-valprint.c (print_optional_low_bound): Get index_type's target type for as long as it is a TYPE_CODE_RANGE. 2014-01-27 Joel Brobecker * procfs.c (procfs_make_note_section): Remove assertion and associated comment. 2014-01-24 Yao Qi * remote.c (remote_read_bytes): Change type of len to ULONGEST. * corelow.c (get_core_siginfo): Likewise. 2014-01-24 Yao Qi * remote.c (remote_write_bytes_aux): Change type of 'len' to ULONGEST. Don't check 'len' is negative. (remote_write_bytes): Change type of 'len' to ULONGEST. 2014-01-23 Tom Tromey PR python/16485: * python/lib/gdb/FrameDecorator.py: (FrameVars.fetch_frame_args): Handle exception from frame.block. (FrameVars.fetch_frame_locals): Likewise. 2014-01-23 Tom Tromey PR python/16487: * python/py-framefilter.c (py_print_frame): Don't call Py_DECREF on a NULL pointer. Move "goto error" to correct place. 2014-01-23 Tom Tromey PR python/16491: * python/py-framefilter.c (apply_frame_filter): Call ensure_python_env after computing gdbarch. 2014-01-23 Yao Qi * target.c (raw_memory_xfer_partial): Change argument type from void * to gdb_byte *. (memory_xfer_partial_1, memory_xfer_partial): Likewise. 2014-01-22 Doug Evans New gdbserver option --debug-format=timestamp. * NEWS: Mention it. 2014-01-22 Andreas Arnez * syscalls/s390x-linux.xml: New file. * syscalls/s390-linux.xml: New file. * s390-linux-tdep.c (XML_SYSCALL_FILENAME_S390): New macro. (XML_SYSCALL_FILENAME_S390X): Likewise. (op_svc): New enum value for SVC opcode. (s390_sigtramp_frame_sniffer): Replace literal by 'op_svc'. (s390_linux_get_syscall_number): New function. (s390_gdbarch_init): Register '*get_syscall_number' and the syscall xml file name. * data-directory/Makefile.in (SYSCALLS_FILES): Add "s390-linux.xml" and "s390x-linux.xml". * NEWS: Announce new feature. 2014-01-22 Baruch Siach * xtensa-tdep.h (xtensa_elf_greg_t): Change type to uint32_t. 2014-01-22 Pedro Alves * xtensa-config.c: Include defs.h. 2014-01-22 Joel Brobecker * common/common-utils.h: Add "ARI:" comment beside __func__ reference. 2014-01-22 Joel Brobecker * common/common-utils.h (FUNCTION_NAME): Expand the macro's documentation a bit. 2014-01-21 Roland McGrath * configure.ac: Call AM_PROG_INSTALL_STRIP. * configure: Regenerate. * aclocal.m4: Regenerate. * Makefile.in (install_sh, INSTALL_STRIP_PROGRAM, STRIP): New substituted variables. (install-strip): New target. (INSTALL_SCRIPT): New substituted variable. (FLAGS_TO_PASS): Add it. (install-only): Use $(INSTALL_SCRIPT) rather than $(INSTALL_PROGRAM) for gcore. 2014-01-20 Tom Tromey * cli/cli-decode.h (struct cmd_list_element): Move all bitfields together. 2014-01-20 Tom Tromey * cli/cli-decode.c (add_cmd, deprecate_cmd, add_alias_cmd) (add_setshow_cmd_full, delete_cmd, lookup_cmd_1) (deprecated_cmd_warning, complete_on_cmdlist): Update. * cli/cli-decode.h (CMD_DEPRECATED, DEPRECATED_WARN_USER) (MALLOCED_REPLACEMENT, DOC_ALLOCATED): Remove. (struct cmd_list_element) : Remove. : New fields. : Now bitfields. * maint.c (maintenance_do_deprecate): Update. * top.c (execute_command): Update. 2014-01-20 Baruch Siach * xtensa-linux-nat.c: Include asm/ptrace.h. 2014-01-17 Iain Buclaw * Makefile.in (SFILES): Add d-support.c. (COMMON_OBS): Add d-support.o. * d-lang.h (d_parse_symbol): Add comment, now defined in d-support.c. * d-lang.c (parse_call_convention) (parse_attributes, parse_function_types) (parse_function_args, parse_type, parse_identifier) (call_convention_p, d_parse_symbol): Move functions to ... * d-support.c: ... New file. 2014-01-17 Iain Buclaw * d-lang.h (d_parse_symbol): Add declaration. * d-lang.c (extract_identifiers) (extract_type_info): Remove functions. (parse_call_convention, parse_attributes) (parse_function_types, parse_function_args) (parse_type, parse_identifier, call_convention_p) (d_parse_symbol): New functions. (d_demangle): Use d_parse_symbol to demangle D symbols. 2014-01-17 Iain Buclaw * d-lang.h (struct builtin_d_type): New data type. (builtin_d_type): Add declaration. * d-lang.c (d_language_arch_info, build_d_types) (builtin_d_type): New functions. (enum d_primitive_types): New data type. (d_language_defn): Change c_language_arch_info to d_language_arch_info. (d_type_data): New static variable. (_initialize_d_language): Initialize d_type_data. 2014-01-17 Iain Buclaw * d-lang.h (d_main_name): Add declaration. * d-lang.c (d_main_name): New function. * symtab.c (find_main_name): Add call to d_main_name. 2014-01-17 Iain Buclaw * d-lang.c (d_language_defn): Change macro_expansion_c to macro_expansion_no. 2014-01-17 Iain Buclaw * MAINTAINERS: Add myself as a write-after-approval maintainer. 2014-01-17 Sergio Durigan Junior * breakpoint.c (insert_bp_location): Add "volatile" keyword to "struct gdb_exception" declaration. * remote.c (getpkt_or_notif_sane): Likewise. 2014-01-17 Doug Evans * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): New function, contents of dirnames_to_char_ptr_vec_append moved here. (delim_string_to_char_ptr_vec): New function. (dirnames_to_char_ptr_vec_append): Rewrite. * common/gdb_vecs.h (delim_string_to_char_ptr_vec): Declare. 2014-01-17 Doug Evans * common/common-utils.h (FUNCTION_NAME): Renamed from ASSERT_FUNCTION, and moved here ... * common/gdb_assert.h (ASSERT_FUNCTION): ... from here. #include "common-utils.h". (gdb_assert, gdb_assert_fail, gdb_assert_not_reached): Update. * common/vec.h (VEC_ASSERT_PASS): Update. * darwin-nat.h: Replace #include of gdb_assert.h with common-utils.h. (MACH_CHECK_ERROR): Update. 2014-01-17 Simon Marchi * gdbarch.sh (gdbarch_address_class_name_to_type_flags): Add comments. * gdbarch.h: Regenerate. 2014-01-16 Tom Tromey * value.c (struct value) : Move earlier. 2014-01-16 Tom Tromey * remote.c (extended_remote_create_inferior): Rename from extended_remote_create_inferior_1. Add "ops" argument. Remove old implementation. 2014-01-16 Pedro Alves * s390-linux-tdep.c (s390_frame_unwind_cache): Swallow NOT_AVAILABLE_ERROR errors while parsing the prologue or reading the backchain. 2014-01-16 Doug Evans * dwarf2read.c (open_and_init_dwp_file): Fix typo in comment. 2014-01-16 Markus Metzger * btrace.h (btrace_thread_flag): New. (struct btrace_thread_info) : New. * record-btrace.c (record_btrace_resume_thread) (record_btrace_find_thread_to_move, btrace_step_no_history) (btrace_step_stopped, record_btrace_start_replaying) (record_btrace_step_thread, record_btrace_decr_pc_after_break) (record_btrace_find_resume_thread): New. (record_btrace_resume, record_btrace_wait): Extend. (record_btrace_can_execute_reverse): New. (record_btrace_open): Fail in non-stop mode. (record_btrace_set_replay): Split into this, ... (record_btrace_stop_replaying): ... this, ... (record_btrace_clear_histories): ... and this. (init_record_btrace_ops): Init to_can_execute_reverse. * NEWS: Announce it. 2014-01-16 Markus Metzger * target.h (struct target_ops) : New. (forward_target_decr_pc_after_break) (target_decr_pc_after_break): New. * target.c (forward_target_decr_pc_after_break) (target_decr_pc_after_break): New. * aix-thread.c (aix_thread_wait): Call target_decr_pc_after_break instead of gdbarch_decr_pc_after_break. * darwin-nat.c (cancel_breakpoint): Call target_decr_pc_after_break instead of gdbarch_decr_pc_after_break. * infrun.c (adjust_pc_after_break): Call target_decr_pc_after_break instead of gdbarch_decr_pc_after_break. * linux-nat.c (cancel_breakpoint): Call target_decr_pc_after_break instead of gdbarch_decr_pc_after_break. * linux-thread-db.c (check_event): Call target_decr_pc_after_break instead of gdbarch_decr_pc_after_break. * record-full.c (record_full_wait_1): Call target_decr_pc_after_break instead of gdbarch_decr_pc_after_break. 2014-01-16 Markus Metzger * btrace.c: Include regcache.h. (btrace_add_pc): New. (btrace_enable): Call btrace_add_pc. (btrace_is_empty): New. * btrace.h (btrace_is_empty): New. * record-btrace.c (require_btrace, record_btrace_info): Call btrace_is_empty. 2014-01-16 Markus Metzger * common/linux-btrace.c (perf_event_read_bts, linux_read_btrace): Support delta reads. (linux_disable_btrace): Change return type. * common/linux-btrace.h (linux_read_btrace): Change parameters and return type to allow error reporting. Update users. (linux_disable_btrace): Change return type. Update users. * common/btrace-common.h (btrace_read_type) : New. (btrace_error): New. (btrace_block) : Comment on BEGIN == 0. * btrace.c (btrace_compute_ftrace): Start from the end of the current trace. (btrace_stitch_trace, btrace_clear_history): New. (btrace_fetch): Read delta trace, return if replaying. (btrace_clear): Move clear history code to btrace_clear_history. (parse_xml_btrace): Throw an error if parsing failed. * target.h (struct target_ops) : Change parameters and return type to allow error reporting. (target_read_btrace): Change parameters and return type to allow error reporting. * target.c (target_read_btrace): Update. * remote.c (remote_read_btrace): Support delta reads. Pass errors on. * NEWS: Announce it. 2014-01-16 Markus Metzger * record.h (record_btrace_frame_unwind) (record_btrace_tailcall_frame_unwind): New declarations. * dwarf2-frame: Include record.h (dwarf2_frame_cfa): Throw an error for btrace frames. * record-btrace.c: Include hashtab.h. (btrace_get_bfun_name): New. (btrace_call_history): Call btrace_get_bfun_name. (struct btrace_frame_cache): New. (bfcache): New. (bfcache_hash, bfcache_eq, bfcache_new): New. (btrace_get_frame_function): New. (record_btrace_frame_unwind_stop_reason): Allow unwinding. (record_btrace_frame_this_id): Compute own id. (record_btrace_frame_prev_register): Provide PC, throw_error for all other registers. (record_btrace_frame_sniffer): Detect btrace frames. (record_btrace_tailcall_frame_sniffer): New. (record_btrace_frame_dealloc_cache): New. (record_btrace_frame_unwind): Add new functions. (record_btrace_tailcall_frame_unwind): New. (_initialize_record_btrace): Allocate cache. * btrace.c (btrace_clear): Call reinit_frame_cache. * NEWS: Announce it. 2014-01-16 Markus Metzger * record-btrace.c (record_btrace_set_replay) (record_btrace_goto_begin, record_btrace_goto_end) (record_btrace_goto): New. (init_record_btrace_ops): Initialize them. * NEWS: Announce it. 2014-01-16 Markus Metzger * record-btrace.c (record_btrace_find_new_threads) (record_btrace_thread_alive): New. (init_record_btrace_ops): Initialize to_find_new_threads and to_thread_alive. 2014-01-16 Markus Metzger * record-btrace.c (record_btrace_resume): New. (record_btrace_wait): New. (init_record_btrace_ops): Initialize to_wait and to_resume. 2014-01-16 Markus Metzger * record-btrace.c (record_btrace_xfer_partial) (record_btrace_insert_breakpoint, record_btrace_remove_breakpoint) (record_btrace_allow_memory_access): New. (init_record_btrace_ops): Initialize new methods. * target.c (raw_memory_xfer_partial): Bail out if target reports that this memory is not available. 2014-01-16 Markus Metzger * target.h (target_ops) : Add target_ops parameter. (forward_target_insert_breakpoint): New. (forward_target_remove_breakpoint): New. (memory_remove_breakpoint, memory_insert_breakpoint): Add target_ops parameter. * target.c (target_insert_breakpoint): Split into this and ... (forward_target_insert_breakpoint): ... this. (target_remove_breakpoint): Split into this and ... (forward_target_remove_breakpoint): ... this. (debug_to_insert_breakpoint): Add target_ops parameter. Call forward_target_insert_breakpoint. (debug_to_remove_breakpoint): Add target_ops parameter. Call forward_target_remove_breakpoint. (update_current_target): Do not inherit or default to_insert_breakpoint and to_remove_breakpoint. * corelow.c (ignore): Add target_ops parameter. * exec.c (ignore): Add target_ops parameter. * mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint): Add target_ops parameter. * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint): Add target_ops parameter. * nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint): Add target_ops parameter. * record-full.c (record_full_beneath_to_insert_breakpoint) (record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint) (tmp_to_remove_breakpoint, record_full_insert_breakpoint) (record_full_remove_breakpoint, record_full_core_insert_breakpoint) (record_full_core_remove_breakpoint): Add target_ops parameter. Update users. (record_full_beneath_to_insert_breakpoint_ops) (record_full_beneath_to_remove_breakpoint_ops) (tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New. (record_full_open): Initialize tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops, record_full_beneath_to_insert_breakpoint_ops, and record_full_beneath_to_remove_breakpoint_ops. * remote-m32r-sdi.c (m32r_insert_breakpoint) (m32r_remove_breakpoint): Add target_ops parameter. * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint): Add target_ops parameter. * remote.c (remote_insert_breakpoint, remote_remove_breakpoint): Add target_ops parameter. 2014-01-16 Jan Kratochvil Markus Metzger * record-btrace.c: Include frame-unwind.h. (record_btrace_frame_unwind_stop_reason) (record_btrace_frame_this_id, record_btrace_frame_prev_register) (record_btrace_frame_sniffer, record_btrace_frame_unwind): New. (init_record_btrace_ops): Install it. 2014-01-16 Jan Kratochvil * frame.c (get_frame_unwind_stop_reason): Unconditionally call get_prev_frame_1. 2014-01-16 Jan Kratochvil * dwarf2-frame.c (dwarf2_frame_cfa): Move UNWIND_UNAVAILABLE check earlier. 2014-01-16 Jan Kratochvil * frame-unwind.c: Include target.h. (frame_unwind_try_unwinder): New function with code from ... (frame_unwind_find_by_frame): ... here. New variable unwinder_from_target, call also target_get_unwinder) (target_get_tailcall_unwinder, and frame_unwind_try_unwinder for it. * target.c (target_get_unwinder, target_get_tailcall_unwinder): New. * target.h (struct target_ops): New fields to_get_unwinder and to_get_tailcall_unwinder. (target_get_unwinder, target_get_tailcall_unwinder): New declarations. 2014-01-16 Markus Metzger * record-btrace.c (record_btrace_fetch_registers) (record_btrace_store_registers) (record_btrace_to_prepare_to_store): New. (init_record_btrace_ops): Add the above. 2014-01-16 Tom Tromey * windows-nat.c (windows_prepare_to_store): Add 'self' argument. * target.h (struct target_ops) : Add argument. (target_prepare_to_store): Add argument. * target.c (debug_to_prepare_to_store): Add argument. (update_current_target): Update. * remote.c (remote_prepare_to_store): Add 'self' argument. * remote-sim.c (gdbsim_prepare_to_store): Add 'self' argument. * remote-mips.c (mips_prepare_to_store): Add 'self' argument. * remote-m32r-sdi.c (m32r_prepare_to_store): Add 'self' argument. * record-full.c (record_full_core_prepare_to_store): Add 'self' argument. * ravenscar-thread.c (ravenscar_prepare_to_store): Add argument. * nto-procfs.c (procfs_prepare_to_store): Add 'self' argument. * monitor.c (monitor_prepare_to_store): Add 'self' argument. * inf-child.c (inf_child_prepare_to_store): Add 'self' argument. * go32-nat.c (go32_prepare_to_store): Add 'self' argument. 2014-01-16 Markus Metzger * btrace.h (replay) : New. (btrace_is_replaying): New. * btrace.c (btrace_clear): Free replay iterator. (btrace_is_replaying): New. * record-btrace.c (record_btrace_is_replaying): New. (record_btrace_info): Print insn number if replaying. (record_btrace_insn_history): Start at replay position. (record_btrace_call_history): Start at replay position. (init_record_btrace_ops): Init to_record_is_replaying. 2014-01-16 Markus Metzger * record-btrace.c (record_btrace_insn_history_range): Include end. (record_btrace_insn_history_from): Adjust range. (record_btrace_call_history_range): Include end. (record_btrace_call_history_from): Adjust range. * NEWS: Announce changes. 2014-01-16 Markus Metzger * record.h (enum record_print_flag) : New. * record.c (get_call_history_modifiers): Recognize /c modifier. (_initialize_record): Document /c modifier. * record-btrace.c (btrace_call_history): Add btinfo parameter. Reorder fields. Optionally indent the function name. Update all users. * NEWS: Announce changes. 2014-01-16 Markus Metzger * common/linux-btrace.c (linux_enable_btrace): Enlarge buffer. 2014-01-16 Markus Metzger * btrace.c (ftrace_new_function): Start counting at one. * record-btrace.c (record_btrace_info): Adjust number of calls and insns. * NEWS: Announce it. 2014-01-16 Markus Metzger * record-btrace.c (btrace_call_history_insn_range): Print insn range as [begin, end]. 2014-01-16 Markus Metzger * btrace.h (struct btrace_func_link): New. (enum btrace_function_flag): New. (struct btrace_inst): Rename to ... (struct btrace_insn): ...this. Update all users. (struct btrace_func) : Remove. (struct btrace_func_link): New. (struct btrace_func): Rename to ... (struct btrace_function): ...this. Update all users. (struct btrace_function) : New. (struct btrace_insn_iterator): Rename to ... (struct btrace_insn_history): ...this. Update all users. (struct btrace_insn_iterator, btrace_call_iterator): New. (struct btrace_target_info) : Remove. (struct btrace_target_info) : New. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * btrace.c (btrace_init_insn_iterator) (btrace_init_func_iterator, compute_itrace): Remove. (ftrace_print_function_name, ftrace_print_filename) (ftrace_skip_file): Change parameter to const. (ftrace_init_func): Remove. (ftrace_debug): Use new btrace_function fields. (ftrace_function_switched): Also consider gaining and losing symbol information). (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return) (ftrace_new_switch, ftrace_find_caller, ftrace_new_function) (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall): New. (ftrace_new_function): Move. Remove debug print. (ftrace_update_lines, ftrace_update_insns): New. (ftrace_update_function): Check for call, ret, and jump. (compute_ftrace): Renamed to ... (btrace_compute_ftrace): ...this. Rewritten to compute call stack. (btrace_fetch, btrace_clear): Updated. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * record-btrace.c (require_btrace): Use new btrace thread info fields. (record_btrace_info, btrace_insn_history) (record_btrace_insn_history, record_btrace_insn_history_range): Use new btrace thread info fields and new iterator. (btrace_func_history_src_line): Rename to ... (btrace_call_history_src_line): ...this. Use new btrace thread info fields. (btrace_func_history): Rename to ... (btrace_call_history): ...this. Use new btrace thread info fields and new iterator. (record_btrace_call_history, record_btrace_call_history_range): Use new btrace thread info fields and new iterator. 2014-01-16 Markus Metzger * frame.h (frame_id_build_unavailable_stack_special): New. * frame.c (frame_id_build_unavailable_stack_special): New. 2014-01-16 Markus Metzger * amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call) (amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New. (amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump to gdbarch. * i386-tdep.c (i386_insn_is_call, i386_insn_is_ret) (i386_insn_is_jump, i386_jmp_p): New. (i386_gdbarch_init): Add insn_is_call, insn_is_ret, and insn_is_jump to gdbarch. * gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New. * gdbarch.h: Regenerated. * gdbarch.c: Regenerated. * arch-utils.h (default_insn_is_call, default_insn_is_ret) (default_insn_is_jump): New. * arch-utils.c (default_insn_is_call, default_insn_is_ret) (default_insn_is_jump): New. 2014-01-16 Markus Metzger * common/btrace-common.h (btrace_read_type) : Change to ... (btrace_read_type) : ... this. Update users. (btrace_read_type) : Change to ... (btrace_read_type) : ... this. Update users. 2014-01-16 Markus Metzger * common/linux-btrace.c (linux_read_btrace): Free trace from previous iteration. 2014-01-15 Doug Evans * dwarf2read.c (open_and_init_dwp_file): Use pulongest to print uint32_t. 2014-01-15 Tom Tromey * dbxread.c (process_one_symbol): Use set_objfile_main_name. * dwarf2read.c (read_partial_die): Use set_objfile_main_name. * objfiles.c (get_objfile_bfd_data): Initialize language_of_main. (set_objfile_main_name): New function. * objfiles.h (struct objfile_per_bfd_storage) : New fields. (set_objfile_main_name): Declare. * symtab.c (find_main_name): Loop over objfiles to find the main name and language. (set_main_name): Now static. (get_main_info): Add comment. * symtab.h (set_main_name): Don't declare. 2014-01-15 Tom Tromey * symtab.c (main_progspace_key): New global. (struct main_info): New. (name_of_main, language_of_main): Remove. (get_main_info, main_info_cleanup): New function. (set_main_name, main_name, main_language): Use get_main_info. (_initialize_symtab): Initialize main_progspace_key. 2014-01-15 Tom Tromey * dbxread.c (process_one_symbol): Update. * dwarf2read.c (read_partial_die): Update. * symfile.c (set_initial_language): Call main_language. * symtab.c (language_of_main): Now static. (set_main_name): Add 'lang' parameter. (find_main_name): Update. (main_language): New function. (symtab_observer_executable_changed): Update. * symtab.h (set_main_name): Update. (language_of_main): Remove. (main_language): Declare. 2014-01-15 Tom Tromey * symfile.c (init_entry_point_info): Use new "initialized" field. Update. * objfiles.h (struct entry_point) : New field. (struct objfile_per_bfd_storage) : New field, moved from... (struct objfile) : ...here. Remove. * objfiles.c (entry_point_address_query): Update. 2014-01-15 Tom Tromey * objfiles.c (entry_point_address_query): Relocate entry point address. (objfile_relocate1): Do not relocate entry point address. * objfiles.h (struct entry_info) : Update comment. : New field. * symfile.c (init_entry_point_info): Find the entry point's section. 2014-01-15 Tom Tromey * solib-frv.c (enable_break): Use entry_point_address_query. 2014-01-15 Omair Javaid * NEWS: Add note on improved process record-replay on arm*-linux* targets. 2014-01-15 Omair Javaid * arm-tdep.c (enum arm_record_result): New enum. (arm_record_unsupported_insn): New function. (arm_record_coproc_data_proc): Removed. (thumb2_record_ld_st_multiple): New function. (thumb2_record_ld_st_dual_ex_tbb): New function. (thumb2_record_data_proc_sreg_mimm): New function. (thumb2_record_ps_dest_generic): New function. (thumb2_record_branch_misc_cntrl): New function. (thumb2_record_str_single_data): New function. (thumb2_record_ld_mem_hints): New function. (thumb2_record_ld_word): New function. (thumb2_record_lmul_lmla_div): New function. (thumb2_record_decode_insn_handler): New function. (decode_insn): Add thumb32 instruction handlers. 2014-01-15 Omair Javaid * arm-linux-tdep.c: Include "record-full.h" and "linux-record.h". (struct arm_linux_record_tdep): Declare. (arm_canonicalize_syscall): New function. (arm_all_but_pc_registers_record): New function. (arm_linux_syscall_record): New function. (arm_linux_init_abi): Add syscall recording constructs. * arm-tdep.c (thumb_record_ldm_stm_swi): Update thumb syscall decoding. (arm_record_coproc_data_proc): Update arm syscall decoding. * arm-tdep.h (struct gdbarch_tdep) : Remove. : New field. * configure.tgt (arm*-*-linux*): Add linux-record.o to gdb_target_obs. 2014-01-15 Omair Javaid * arm-tdep.c (thumb_record_misc): Update to use sp as base register for push instruction recording. 2014-01-15 Omair Javaid * arm-tdep.c (thumb_record_misc): Update to correct logical error while recording ldm, ldmia and pop instructions. 2014-01-15 Omair Javaid * arm-tdep.c (struct arm_mem_r) : Change type to uint32_t. 2014-01-15 Pedro Alves * go32-nat.c (go32_open, go32_close, go32_attach, go32_detach) (go32_resume, go32_fetch_registers, store_register) (go32_store_registers, go32_prepare_to_store) (go32_xfer_memory, go32_files_info, go32_kill_inferior) (go32_create_inferior, go32_can_run, go32_terminal_init) (go32_terminal_inferior, go32_terminal_ours): Delete forward declarations. 2014-01-15 Tom Tromey * target.h (async_callback_ftype): New typedef. (struct target_ops) : Use it. 2014-01-15 Joel Brobecker * python/py-value.c (get_field_type): Remove unnecessary curly braces for single-statement if block. 2014-01-15 Joel Brobecker * python/py-type.c (convert_field): Add missing empty line after declarations. 2014-01-14 Doug Evans * symfile.h (expand_symtabs_matching): Renamed from expand_partial_symbol_names. Update prototype. (map_symbol_filenames): Renamed from map_partial_symbol_filenames. * symfile.c (expand_symtabs_matching): Renamed from expand_partial_symbol_names. New args file_matcher, kind. Rename arg fun to symbol_matcher. (map_symbol_filenames): Renamed from map_partial_symbol_filenames. * ada-lang.c (ada_complete_symbol_matcher): Renamed from ada_expand_partial_symbol_name. (ada_make_symbol_completion_list): Update to call expand_symtabs_matching. (ada_add_global_exceptions): Call expand_symtabs_matching. * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update to call map_symbol_filenames. * symtab.c (sources_info): Update to call map_symbol_filenames. (search_symbols): Call expand_symtabs_matching. (symbol_completion_matcher): Renamed from expand_partial_symbol_name. (default_make_symbol_completion_list_break_on): Update to call expand_symtabs_matching. (make_source_files_completion_list): Update to call map_symbol_filenames. 2014-01-14 Doug Evans * symfile.h (expand_symtabs_file_matcher_ftype): New typedef. (expand_symtabs_symbol_matcher_ftype): New typedef. (quick_symbol_functions.expand_symtabs_matching): Update to use. expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype. * symfile.c (expand_partial_symbol_names): Update to use expand_symtabs_symbol_matcher_ftype. * dwarf2read.c (dw2_expand_symtabs_matching): Update to use expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype. Arg name_matcher renamed to symbol_matcher. * psymtab.c (recursively_search_psymtabs): Update to use expand_symtabs_symbol_matcher_ftype. Arg name_matcher renamed to sym_matcher. (expand_symtabs_matching_via_partial): Update to use expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype. Arg name_matcher renamed to symbol_matcher. 2014-01-14 Doug Evans * psymtab.c (expand_partial_symbol_names): Delete, moved to symfile.c. (map_partial_symbol_filenames): Ditto. * psymtab.h (expand_partial_symbol_names): Delete, moved to symfile.h. (map_partial_symbol_filenames): Ditto. * symfile.c (expand_partial_symbol_names): Moved here from psymtab.c. (map_partial_symbol_filenames): Ditto. * symfile.h (expand_partial_symbol_names): Moved here from psymtab.h. (map_partial_symbol_filenames): Ditto. * symtab.c: Delete #include "psymtab.h". 2014-01-14 Pedro Alves Tom Tromey * infrun.c (use_displaced_stepping): Use find_record_target instead of RECORD_IS_USED. (adjust_pc_after_break): Use record_full_is_used instead of RECORD_IS_USED. * record-btrace.c (record_btrace_open): Call record_preopen instead of checking RECORD_IS_USED. * record-full.c (record_full_shortname) (record_full_core_shortname): New globals. (record_full_is_used): New function. (find_full_open): Call record_preopen instead of checking RECORD_IS_USED. (init_record_full_ops): Set the target's shortname to record_full_shortname. (init_record_full_core_ops): Set the target's shortname to record_full_core_shortname. * record-full.h (record_full_is_used): Declare. * record.c (find_record_target): Make extern. (record_preopen): New function. * record.h (RECORD_IS_USED): Delete macro. (find_record_target, record_preopen): Declare functions. 2014-01-14 Yao Qi * gdbarch.sh (core_xfer_shared_libraries): Change its argument 'len''s type to ULONGEST. (core_xfer_shared_libraries_aix): Likewise. * gdbarch.c, gdbarch.h: Regenerated. * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries): Change type of 'len' to ULONGEST. * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise. (rs6000_aix_core_xfer_shared_libraries_aix): Likewise. 2014-01-14 Yao Qi * common/linux-osdata.c (linux_xfer_osdata_processes): Change type of 'len' to ULONGEST. (linux_xfer_osdata_processgroups): Likewise. (linux_xfer_osdata_threads): Likewise. (linux_xfer_osdata_fds): Likewise. (linux_xfer_osdata_isockets): Likewise. (linux_xfer_osdata_shm): Likewise. (linux_xfer_osdata_sem): Likewise. (linux_xfer_osdata_msg): Likewise. (linux_common_xfer_osdata): Likewise. (struct osdata_type) : Likewise. * common/linux-osdata.h (linux_common_xfer_osdata): Update the declaration. 2014-01-14 Yao Qi * target.h (target_xfer_partial_ftype): Update. (struct target_ops) : Change 'len' type to ULONGEST. * aix-thread.c (aix_thread_xfer_partial): Change type of argument 'len' to ULONGEST. * auxv.c (procfs_xfer_auxv): Likewise. (ld_so_xfer_auxv): Likewise. (memory_xfer_auxv): Likewise. * bfd-target.c (target_bfd_xfer_partial): Likewise. * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise. * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise. * corelow.c (core_xfer_partial): Likewise. * ctf.c (ctf_xfer_partial): Likewise. * darwin-nat.c (darwin_read_write_inferior): Likewise. Use '%u'. (darwin_read_dyld_info): Likewise. (darwin_xfer_partial): Likewise. * exec.c (section_table_xfer_memory_partial): Likewise. (exec_xfer_partial): Likewise. * exec.h (section_table_xfer_memory_partial): Update declaration. * gnu-nat.c (gnu_xfer_memory): Likewise. Call pulongest instead of plongest. (gnu_xfer_partial): Likewise. * ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise. (ia64_hpux_xfer_solib_got): Likewise. (ia64_hpux_xfer_partial): Likewise. * ia64-linux-nat.c (ia64_linux_xfer_partial): * inf-ptrace.c (inf_ptrace_xfer_partial): * inf-ttrace.c (inf_ttrace_xfer_partial): * linux-nat.c (linux_xfer_siginfo): Likewise. (linux_nat_xfer_partial): Likewise. (spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise. (linux_nat_xfer_osdata, linux_xfer_partial): Likewise. * monitor.c (monitor_xfer_memory): Likewise. (monitor_xfer_partial): Likewise. * procfs.c (procfs_xfer_partial): Likewise. * record-full.c (record_full_xfer_partial): Likewise. (record_full_core_xfer_partial): Likewise. * remote-sim.c (gdbsim_xfer_memory): Likewise. Call pulongest instead of plongest. (gdbsim_xfer_partial): Likewise. * remote.c (remote_xfer_partial): Likewise. * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise. * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update declaration. * rs6000-nat.c (rs6000_xfer_partial): Likewise. (rs6000_xfer_shared_libraries): Likewise. * sol-thread.c (sol_thread_xfer_partial): Likewise. * sparc-nat.c (sparc_xfer_wcookie): Likewise. (sparc_xfer_partial): Likewise. * spu-linux-nat.c (spu_proc_xfer_spu): Likewise. (spu_xfer_partial): Likewise. * spu-multiarch.c (spu_xfer_partial): Likewise. * target.c (target_read_live_memory): Likewise. (memory_xfer_live_readonly_partial): Likewise. (memory_xfer_partial, memory_xfer_partial_1): Likewise. (target_xfer_partial, default_xfer_partial): Likewise. (current_xfer_partial): Likewise. * tracepoint.c (tfile_xfer_partial): Likewise. * windows-nat.c (windows_xfer_memory): Likewise. Call pulongest instead of plongest. (windows_xfer_partial): Likewise. (windows_xfer_shared_libraries): Likewise. 2014-01-14 Yao Qi * rs6000-nat.c (rs6000_xfer_shared_libraries): Use target_xfer_partial_ftype. 2014-01-13 Siva Chandra Reddy PR python/15464 PR python/16113 * valops.c (value_struct_elt_bitpos): New function * py-type.c (convert_field): Set 'name' attribute of a gdb.Field object to 'None' if the field name is an empty string (""). * python/py-value.c (valpy_getitem): Use 'bitpos' and 'type' attribute to look for a field when 'name' is 'None'. (get_field_type): New function 2014-01-13 Doug Evans PR symtab/16426 * dwarf2read.c (dwarf2_get_dwz_file): Call gdb_bfd_record_inclusion. (try_open_dwop_file): Ditto. * gdb_bfd.c: #include "vec.h". (bfdp): New typedef. (struct gdb_bfd_data): New member included_bfds. (gdb_bfd_unref): Unref all included bfds. (gdb_bfd_record_inclusion): New function. * gdb_bfd.h (gdb_bfd_record_inclusion): Declare. 2014-01-13 Tom Tromey * gdbcore.h (deprecated_core_resize_section_table): Remove. 2014-01-13 Tom Tromey * defs.h (use_windows): Remove. * gdb.c (main): Update. * main.c (captured_main, gdb_main): Update. * main.h (struct captured_main_args) : Remove. * top.c (use_windows): Remove. 2014-01-13 Tom Tromey * defs.h (deprecated_flush_hook): Remove. 2014-01-13 Jan Kratochvil PR threads/16216 * linux-thread-db.c (try_thread_db_load): Add parameter check_auto_load_safe. Move here the file_is_auto_load_safe call. (try_thread_db_load_from_pdir_1): Move it there from here. (try_thread_db_load_from_sdir): Update caller. (try_thread_db_load_from_dir): Move it there from here. 2014-01-13 Patrick Palka * regformats/regdat.sh: Always rewrite the register file. 2014-01-13 Pedro Alves * Makefile.in (CHECK_HEADERS): New variable. (check-headers:): New rule. 2014-01-13 Tom Tromey * cli/cli-setshow.c (do_set_command): Update. * defs.h (deprecated_set_hook): Remove. * top.c (deprecated_set_hook): Remove. 2014-01-13 Pedro Alves * tracepoint.c (tfile_fetch_registers): Don't infer the PC from the tracepoint if the PC is a pseudo-register. 2014-01-13 Tom Tromey * defs.h (XCALLOC): Remove. * bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC. (print_bcache_statistics): Use XCNEWVEC, not XCALLOC. * dwarf2loc.c (allocate_piece_closure): Likewise. * elfread.c (elf_symfile_segments): Likewise. (elf_symfile_segments): Likewise. * gdbtypes.c (copy_type_recursive): Likewise. * i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC. * jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC. * minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not XCALLOC. * mt-tdep.c (mt_gdbarch_init): Likewise. * opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not XCALLOC. * psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC. * regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC. * registry.c (registry_alloc_data): Likewise. * rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * serial.c (serial_fdopen_ops): Likewise. * solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not XCALLOC. * spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC. * symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC, not XCALLOC. 2014-01-13 Tom Tromey * defs.h (XMALLOC): Remove. * avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC. * bfin-tdep.c (bfin_gdbarch_init): Likewise. * cli-out.c (struct ui_out *): Likewise. * cli/cli-dump.c (add_dump_command): Likewise. (add_dump_command): Likewise. * complaints.c (get_complaints): Likewise. (find_complaint): Likewise. * dwarf2-frame.c (execute_cfa_program): Likewise. * dwarf2read.c (abbrev_table_read_table): Likewise. * gdbarch.sh: Likewise. * gdbarch.c: Rebuild. * inf-ttrace.c (inf_ttrace_add_page): Likewise. * interps.c (interp_new): Likewise. * lm32-tdep.c (lm32_gdbarch_init): Likewise. * m32r-tdep.c (m32r_gdbarch_init): Likewise. * mi/mi-console.c (mi_console_file_new): Likewise. * mi/mi-interp.c (mi_interpreter_init): Likewise. * mi/mi-out.c (mi_out_new): Likewise. * mi/mi-parse.c (mi_parse): Likewise. * microblaze-tdep.c (microblaze_gdbarch_init): Likewise. * moxie-tdep.c (moxie_gdbarch_init): Likewise. * observer.c (xalloc_observer_list_node): Likewise. * regcache.c (regcache_xmalloc_1): Likewise. * reggroups.c (reggroup_new): Likewise. (_initialize_reggroup): Likewise. * registry.c (register_data_with_cleanup): Likewise. * remote.c (remote_notif_stop_alloc_reply): Likewise. * ser-base.c (serial_ttystate): Likewise. * ser-mingw.c (make_pipe_state): Likewise. * ser-pipe.c (pipe_open): Likewise. * serial.c (serial_open): Likewise. * sh64-tdep.c (sh64_gdbarch_init): Likewise. * tui/tui-data.c (tui_alloc_generic_win_info): Likewise. (tui_alloc_win_info): Likewise. (tui_add_content_elements): Likewise. * tui/tui-file.c (tui_file_new): Likewise. * tui/tui-out.c (tui_out_new): Likewise. * ui-file.c (mem_file_new): Likewise. * ui-out.c (push_level): Likewise. (make_cleanup_ui_out_end): Likewise. (append_header_to_list): Likewise. (ui_out_new): Likewise. * user-regs.c (user_reg_add_builtin): Likewise. 2014-01-13 Tom Tromey * defs.h (XZALLOC): Remove. * ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC. * ada-tasks.c (get_ada_tasks_pspace_data): Likewise. (get_ada_tasks_inferior_data): Likewise. * auto-load.c (get_auto_load_pspace_data): Likewise. * auxv.c (get_auxv_inferior_data): Likewise. * bfd-target.c (target_bfd_reopen): Likewise. * breakpoint.c (get_catch_syscall_inferior_data): Likewise. (deprecated_insert_raw_breakpoint): Likewise. * bsd-uthread.c (bsd_uthread_pid_to_str): Likewise. * corelow.c (core_open): Likewise. * darwin-nat.c (darwin_check_new_threads): Likewise. (darwin_attach_pid): Likewise. * dummy-frame.c (dummy_frame_push): Likewise. * dwarf2-frame.c (dwarf2_frame_cache): Likewise. * dwarf2loc.c (allocate_piece_closure): Likewise. * elfread.c (elf_symfile_segments): Likewise. * eval.c (ptrmath_type_p): Likewise. * exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise. * gdbtypes.c (alloc_type_arch): Likewise. (alloc_type_instance): Likewise. * hppa-tdep.c (hppa_gdbarch_init): Likewise. * inf-child.c (inf_child_can_use_agent): Likewise. * inflow.c (get_inflow_inferior_data): Likewise. * infrun.c (save_infcall_suspend_state): Likewise. * jit.c (jit_reader_load): Likewise. (get_jit_objfile_data): Likewise. (get_jit_program_space_data): Likewise. (jit_object_open_impl): Likewise. (jit_symtab_open_impl): Likewise. (jit_block_open_impl): Likewise. (jit_frame_sniffer): Likewise. * linux-fork.c (add_fork): Likewise. * maint.c (make_command_stats_cleanup): Likewise. * objfiles.c (get_objfile_pspace_data): Likewise. * opencl-lang.c (struct lval_closure): Likewise. * osdata.c (osdata_start_osdata): Likewise. * progspace.c (new_address_space): Likewise. (add_program_space): Likewise. * remote-sim.c (get_sim_inferior_data): Likewise. * sh-tdep.c (sh_gdbarch_init): Likewise. * skip.c (Ignore): Likewise. (skip_delete_command): Likewise. * solib-aix.c (get_solib_aix_inferior_data): Likewise. (library_list_start_library): Likewise. (solib_aix_current_sos): Likewise. * solib-darwin.c (get_darwin_info): Likewise. (darwin_current_sos): Likewise. * solib-dsbt.c (get_dsbt_info): Likewise. * solib-ia64-hpux.c (new_so_list): Likewise. (ia64_hpux_get_solib_linkage_addr): Likewise. * solib-spu.c (append_ocl_sos): Likewise. (spu_current_sos): Likewise. * solib-svr4.c (get_svr4_info): Likewise. (svr4_keep_data_in_core): Likewise. (library_list_start_library): Likewise. (svr4_default_sos): Likewise. (svr4_read_so_list): Likewise. * solib-target.c (library_list_start_library): Likewise. (solib_target_current_sos): Likewise. * sparc-tdep.c (sparc32_gdbarch_init): Likewise. * symfile-debug.c (install_symfile_debug_logging): Likewise. * symfile.c (default_symfile_segments): Likewise. * target-descriptions.c (tdesc_data_init): Likewise. (tdesc_create_reg): Likewise. (struct tdesc_type *): Likewise. (tdesc_create_vector): Likewise. (tdesc_set_struct_size): Likewise. (struct tdesc_type *): Likewise. (tdesc_free_feature): Likewise. (tdesc_create_feature): Likewise. * windows-nat.c (windows_add_thread): Likewise. (windows_make_so): Likewise. * xml-support.c (gdb_xml_body_text): Likewise. (gdb_xml_create_parser_and_cleanup): Likewise. (xml_process_xincludes): Likewise. * xml-syscall.c (allocate_syscalls_info): Likewise. (syscall_create_syscall_desc): Likewise. 2014-01-12 Sergio Durigan Junior * i386-tdep.c (i386_stap_parse_special_token_triplet): New function, with code from i386_stap_parse_special_token. (i386_stap_parse_special_token_three_arg_disp): Likewise. (i386_stap_parse_special_token): Move code to the two functions above; simplify it. 2014-01-09 Pedro Alves Hui Zhu PR gdb/16101 * breakpoint.c (insert_bp_location): Rename hw_bp_err_string to bp_err_string. Don't mark the location shlib_disabled if the error thrown wasn't a generic or memory error. Catch errors thrown while inserting breakpoints in overlayed code. Output error message of software breakpoints. * remote.c (remote_insert_breakpoint): If this breakpoint has target-side commands but this stub doesn't support Z0 packets, throw NOT_SUPPORTED_ERROR error. * exceptions.h (enum errors) : New error. * target.h (target_insert_breakpoint): Extend comment. (target_insert_hw_breakpoint): Add comment. 2014-01-08 Pedro Alves * remote.c (remote_add_thread): Add threads silently if starting up. (remote_notice_new_inferior): If in all-stop, and starting up, don't call notice_new_inferior. (get_current_thread): New function, factored out from ... (add_current_inferior_and_thread): ... this. Adjust. (remote_start_remote) : Fetch the thread list. If we found any thread, then select the remote's current thread as GDB's current thread too. 2014-01-08 Joel Brobecker * NEWS: Create a new section for the next release branch. Rename the section of the current branch, now that it has been cut. 2014-01-08 Joel Brobecker GDB 7.7 branch created (79301218fa0f074c5656db0ec8972a5ddcf91fb5): * version.in: Bump version to 7.7.50.DATE-cvs. 2014-01-08 Yao Qi * spu-linux-nat.c (spu_symbol_file_add_from_memory): Change type of 'id' to gdb_byte. Cast 'id' to 'const char *'. (spu_xfer_partial): Cast 'buf' to 'const char *'. 2014-01-08 Yao Qi * spu-linux-nat.c (spu_symbol_file_add_from_memory): Pass return value of bfd_get_filename to symbol_file_add_from_bfd. 2014-01-08 Pierre Muller Fix PR16201. * coff-pe-read.c (struct read_pe_section_data): Add index field. (add_pe_exported_sym): Use SECTION_DATA->INDEX for call to prim_record_mininal_symbol_and_info. (add_pe_forwarded_sym): Use known section number of forwarded symbol in call to prim_record_minimal_symbol_and_info. (read_pe_exported_syms): Set index field of section_data. 2014-01-07 Andrew Pinski * features/aarch64-core.xml (cpsr): Change to be 64bit. * features/aarch64.c: Regenerate. 2014-01-07 Andreas Schwab * target.c (return_null): Define. (update_current_target): Use it instead of return_zero for functions that return a pointer. 2014-01-07 Edjunior Barbosa Machado * source.c (add_path): Fix check for duplicated paths in the previously included paths. 2014-01-07 Honggyu Kim * ada-lang.c: Remove duplicated include statements. * alphabsd-nat.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64fbsd-nat.c: Ditto. * auto-load.c: Ditto. * ax-gdb.c: Ditto. * breakpoint.c: Ditto. * dbxread.c: Ditto. * fork-child.c: Ditto. * gdb_usleep.c: Ditto. * i386-darwin-tdep.c: Ditto. * i386fbsd-nat.c: Ditto. * infcmd.c: Ditto. * inferior.c: Ditto. * jv-lang.c: Ditto. * linux-nat.c: Ditto. * linux-tdep.c: Ditto. * m68kbsd-nat.c: Ditto. * m68klinux-nat.c: Ditto. * microblaze-tdep.c: Ditto. * mips-linux-tdep.c: Ditto. * mn10300-tdep.c: Ditto. * nto-tdep.c: Ditto. * opencl-lang.c: Ditto. * osdata.c: Ditto. * printcmd.c: Ditto. * regcache.c: Ditto. * remote-m32r-sdi.c: Ditto. * remote.c: Ditto. * symfile.c: Ditto. * symtab.c: Ditto. * tilegx-linux-nat.c: Ditto. * tilegx-tdep.c: Ditto. * tracepoint.c: Ditto. * valops.c: Ditto. * vaxbsd-nat.c: Ditto. * windows-nat.c: Ditto. * xtensa-tdep.c: Ditto. 2014-01-07 Yao Qi * spu-linux-nat.c (_initialize_spu_nat): Declare. 2014-01-07 Yao Qi Joel Brobecker * aix-thread.c (pdc_read_regs): Cast parameter to uintptr_t. (pdc_write_regs): Likewise. (fetch_regs_kernel_thread): Likewise. (store_regs_kernel_thread): Likewise. 2014-01-07 Joel Brobecker * ada-varobj.c (ada_varobj_adjust_for_child_access): Convert tagged type objects to their actual type. 2014-01-07 Joel Brobecker * ada-valprint.c (print_field_values): Add "language" parameter. Update calls to print_field_values and print_variant_part. Pass new parameter "language" in call to val_print instead of "current_language". Replace call to ada_val_print by call to val_print. (print_variant_part): Add "language" parameter. (ada_val_print_struct_union): Update call to print_field_values. 2014-01-07 Joel Brobecker * ada-valprint.c (ui_memcpy): Delete. (ada_print_floating): Update documentation. Add empty line between between function documentation and implementation. Delete variable "buffer". Use ui_file_xstrdup in place of ui_file_put. Minor adjustments following this change. 2014-01-07 Joel Brobecker * ada-valprint.c (ada_val_print_string): New function, extracted from ada_val_print_array. (ada_val_print_array): Replace extracted code by call to ada_val_print_string followed by a return. Move "else" branch to the function's top block. 2014-01-07 Joel Brobecker * ada-valprint.c (ada_val_print_array): Move implementation down. Rename parameter "offset" and "val" into "offset_aligned" and "original_value" respectively. Add parameter "offset". 2014-01-07 Joel Brobecker * ada-valprint.c (ada_val_print_ref): Rewrite by mostly re-organizing the code. Change the "???" message printed when target type is a TYPE_CODE_UNDEF into "". 2014-01-07 Joel Brobecker * ada-valprint.c (print_record): Delete, implementation inlined... (ada_val_print_struct_union): ... here. Remove call to ada_check_typedef in inlined implementation. 2014-01-07 Joel Brobecker * ada-valprint.c (ada_val_print_gnat_array): New function, extracted from ada_val_print_1; (ada_val_print_ptr, ada_val_print_num, ada_val_print_enum) (ada_val_print_flt, ada_val_print_struct_union) (ada_val_print_ref): Likewise. (ada_val_print_1): Delete variables i and elttype. Replace extracted-out code by call to corresponding new functions. 2014-01-07 Joel Brobecker * ada-valprint.c (ada_val_print_1): Remove call to gdb_flush. 2014-01-07 Joel Brobecker * ada-valprint.c (ada_val_print_1): Replace calls to ada_val_print_1 by calls to val_print. 2014-01-07 Joel Brobecker * ada-valprint.c (ada_val_print_1): Add parameter "language". Update calls to self accordingly. Replace calls to c_val_print by calls to val_print. 2014-01-07 Joel Brobecker * ada-valprint.c (print_record): Delete declaration. (adjust_type_signedness, ada_val_print_1): Likewise. (ada_val_print): Move function implementation down. (print_variant_part, print_field_values, print_record): Move function implementation up. 2014-01-07 Joel Brobecker * python/py-type.c (typy_get_name): New function. (type_object_getset): Add entry for attribute "name". * NEWS: Add entry mentioning this new attribute. 2014-01-07 Yao Qi * gnu-nat.c (set_exceptions_cmd): Remove an empty body 'if' statement. 2014-01-07 Yao Qi * gnu-nat.c (info_port_rights): Add qualifier const to argument args. 2014-01-07 Yao Qi * gnu-nat.c (trace_me): Use 'void' for empty argument list. 2014-01-07 Yao Qi * gnu-nat.c (make_inf) Update declaration. (make_inf): Make it static. (inf_set_traced): Likewise. (inf_port_to_thread, inf_task_died_status): Likewise. 2014-01-07 Yao Qi * gnu-nat.c (inf_tid_to_proc): Remove declaration. 2014-01-07 Yao Qi * gnu-nat.c (_initialize_gnu_nat): Declare. 2014-01-07 Yao Qi * gdbarch.sh (byte_order, byte_order_for_code): Change type to 'enum bfd_endian'. (struct gdbarch_info) : Change type to 'enum bfd_endian'. : Likewise. * gdbarch.c, gdbarch.h: Regenerated. 2014-01-06 Sasha Smundak * jit.c: (jit_reader_load_command): Fix JIT reader path creation. 2014-01-06 Tom Tromey * doublest.c (convert_doublest_to_floatformat): Use const, not CONST. * somread.c (som_symtab_read): Likewise. 2014-01-07 Hui Zhu * gdb_bfd.c (gdb_bfd_stash_filename): Removed. (gdb_bfd_open): Removed gdb_bfd_stash_filename. (gdb_bfd_fopen): Ditto. (gdb_bfd_openr): Ditto. (gdb_bfd_openw): Ditto. (gdb_bfd_openr_iovec): Ditto. (gdb_bfd_fdopenr): Ditto. * gdb_bfd.h (gdb_bfd_stash_filename): Removed. * solib-aix.c (solib_aix_bfd_open): Alloc object_bfd->filename with xstrdup. * solib-darwin.c (darwin_bfd_open): Alloc res->filename with xstrdup. * symfile-mem.c (symbol_file_add_from_memory): Removed gdb_bfd_stash_filename. 2014-01-03 Doug Evans * nat/linux-waitpid.c (linux_debug): Remove extraneous \n from output. 2014-01-01 Joel Brobecker Update year range in copyright notice of all files. 2014-01-01 Joel Brobecker * top.c (print_gdb_version): Set copyright year to 2014. 2014-01-01 Joel Brobecker * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2013. For older changes see ChangeLog-2013. Local Variables: mode: change-log left-margin: 8 fill-column: 74 version-control: never coding: utf-8 End: