Thu Sep 5 12:09:13 1996 Per Bothner * value.h (COERCE_REF): Fix previous change. (COERCE_ENUM): Add a check_typedef (this is the real fix). Thu Sep 5 03:28:30 1996 Wilfried Moser (Alcatel) * eval.c (evaluate_subexp_standard): In case of OP_ARRAY: make a better check of array boundaries. Thu Sep 5 01:29:42 1996 Stu Grossman (grossman@critters.cygnus.com) * configure: Update aclocal.m4 and re-run autoconf to get correct defs for BFD stuff. * remote-wiggler.c (wiggler_error): Error codes are hex. Also, fix default message generation. Wed Sep 4 17:28:40 1996 Stu Grossman (grossman@critters.cygnus.com) * Makefile.in: Add mswin to SUBDIRS. Add rules for mswin/libwingdb.a and remote-wiggler.o. * breakpoint.c (breakpoint_here_p): Clean up bp enabled test. * (breakpoint_inserted_here_p): New func, just like breakpoint_here_p, except it's honest. Honestly. * breakpoint.h: Proto for above. start-sanitize-gdbtk * configure configure.in: Add host *windows* to list of hosts that don't support GDBtk. end-sanitize-gdbtk * configure configure.in: Add mswin to configdirs if host is i[3456]86-*-windows. * core-aout.c (fetch_core_registers register_addr) gdbcore.h: Change all vars that can contain addresses to type CORE_ADDR. * findvar.c (supply_register): Allow val to be NULL. This means that regno is unsupported. * (read_pc read_pc_pid write_pc write_pc_pid): Make non-pid forms just call pid forms with inferior_pid so that there's only once place to hack PC's and such. * infrun.c (proceed): Don't skip breakpoints if user changed PC. * remote-wiggler.c: New file. Support for BDM interface from Macraigor Systems. * serial.c: Enhance serial logging capability. Add hex and octal output modes (set remotelogbase {hex|octal|ascii}. Also log breaks, timeouts, errors, and eofs. * serial.h: Redefine SERIAL_SEND_BREAK to go through a wrapper function so that we can log breaks. Don't export serial_logfile or serial_logfp. * top.c (execute_command): Don't test for serial_logfp here. Just call serial_log_comand, and let serial.c sort it out. * valops.c (value_of_variable): Don't attempt to establish frames for static and global variables. This makes things work a bit better if the stack or frame pointer is trashed. * config/m68k/monitor.mt (TDEPFILES): Add remote-wiggler.o. * config/m68k/tm-m68k.h: Define STACK_ALIGN. CPU32 can't hack misaligned stacks during function calls. Wed Sep 4 13:06:26 1996 Ian Lance Taylor * terminal.h: Don't use #elif. Wed Sep 4 06:49:35 1996 Wilfried Moser (Alcatel) * ch-exp.c (parse_tuple_element): Allow (*): for array tuples if we have a type. * eval.c (evaluate_subexp_standard): In case of OP_ARRAY: check number of args against bounds of array to avoid memory corruption. * value.h (COERCE_REF): Do a CHECK_TYPEDEF in case we get a TYPE_CODE_TYPEDEF. Fri Aug 30 15:07:14 1996 James G. Smith * remote-mips.c: Provide support for CAIRO target board. (cairo_open, cairo_ops): Added. (mips_monitor_type): MON_CAIRO Added. (mips_enter_debug, mips_exit_debug, mips_initialize, mips_fetch_registers, common_breakpoint, mips_load, _initialize_remote_mips): Updated. Thu Aug 29 17:00:18 1996 Michael Meissner * nlm/configure.in (i[345]86-*-*): Recognize i686 for pentium pro. * nlm/configure: Regenerate. * gdbserver/configure.in (i[345]86-*-*): Recognize i686 for pentium pro. Wed Aug 28 13:11:15 1996 Ian Lance Taylor * configure.in: If CY_AC_PATH_TCLCONFIG can't find TCL, don't run CY_AC_LOAD_TCLCONFIG. * configure: Rebuild. Tue Aug 27 12:40:40 1996 Fred Fish * infrun.c (wait_for_inferior): Initialize stop_func_end before calling find_pc_partial_function. Tue Aug 27 10:17:34 1996 Michael Meissner * configure: Regenerate again. Tue Aug 27 04:25:08 1996 Geoffrey Noer * configure.in: work around host_alias configure bug. AC_CANONICAL_HOST is called twice (first by AC_CHECK_TOOL and second by AC_CANONICAL_SYSTEM). The second clobbers the previous setting. Circumventing by moving the second check to before the first. * configure: regenerated start-sanitize-d10v Mon Aug 26 18:36:54 1996 Martin M. Hunt * config/d10v/d10v.mt: New file. * config/d10v/tm-d10v.h: New file. * configure.in: New target D10V. * d10v-tdep.c: New file. end-sanitize-d10v Sun Aug 25 00:09:47 1996 Fred Fish * rs6000-tdep.c: Fix typo in comment. * valops.c (call_function_by_hand): Set using_gcc to 2 for code compiled without -g, per comment in code. * config/a29k/tm-a29k.h (STACK_ALIGN): Add comment. * config/sparc/tm-sparc.h (STACK_ALIGN): Add comment. * config/sparc/tm-sp64.h (STACK_ALIGN): Add comment. * config/pyr/tm-pyr.h (STACK_ALIGN): Add comment. * config/m88k/tm-m88k.h (STACK_ALIGN): Add comment. * config/pa/tm-hppa.h (PUSH_ARGUMENTS): Enclose args in ()'s. (STACK_ALIGN): Add comment, move to be with other associated macros, and document. * config/mips/tm-mips.h (PUSH_ARGUMENTS): Enclose args in ()'s. (STACK_ALIGN): Remove completely, handled by PUSH_ARGUMENTS. * config/alpha/tm-alpha.h (PUSH_ARGUMENTS): Enclose args in ()'s. * config/rs6000/tm-rs6000.h (STACK_ALIGN): Remove completely, handled by PUSH_ARGUMENTS. (PUSH_ARGUMENTS): Enclose args in ()'s. Fri Aug 23 13:55:05 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * infrun.c (wait_for_inferior): Try to reenable shared library breakpoints even if auto_solib_load is not set. Fri Aug 23 00:44:57 1996 Fred Fish * gdbtk.c (gdbtk_init): Check for a DISPLAY env variable and gracefully degrade to using command line interface if none is found. Wed Aug 21 16:31:27 1996 Fred Fish * valprint.c (print_longest): Test for CC_HAS_LONG_LONG as well as PRINTF_HAS_LONG_LONG. * expprint.c (dump_expression): Ditto. * configure.in: Fix check for long long support in compiler to use a function body, not a nested function. * configure: Rebuild with autoconf. Tue Aug 20 17:59:42 1996 Ian Lance Taylor * aclocal.m4: Include ../bfd/aclocal.m4. * configure.in: Add stdlib.h to AC_CHECK_HEADERS. Call BFD_NEED_DECLARATION on malloc, realloc, and free. * acconfig.h: Add NEED_DECLARATION_MALLOC, NEED_DECLARATION_REALLOC, and NEED_DECLARATION_FREE. * configure, config.in: Rebuild. * defs.h: Include and based on HAVE_*_H rather than __STDC__. Only declare malloc, realloc, and free if NEED_DECLARATION_* is defined. Tue Aug 20 15:37:03 1996 Fred Fish * solib.c (_initialize_solib): Add missing '\' chars at ends of strings that continue on next line. (enable_break): Replace "return 0" with setting success to zero and letting normal return handle the return. Sat Aug 17 14:16:23 1996 Fred Fish * mips-tdep.c (mips_push_arguments): Make sure sp and struct_addr are properly aligned. Fri Aug 16 17:54:26 1996 Stan Shebs * rs6000-tdep.c (rs6000_fix_call_dummy): Add full set of arguments. * config/rs6000/tm-rs6000.h (FIX_CALL_DUMMY): Pass all arguments to function, declare function correctly. Fri Aug 16 17:24:35 1996 Dawn Perchik * symtab.h: changed namespace to _namespace for compiling under MFC v4.0. Fri Aug 16 13:52:21 1996 Stan Shebs * mpw-make.sed: Update for various recent changes, add some comments. start-sanitize-gm * mpw-config.in: Fix name of Magic Cap-specific file. end-sanitize-gm Fri Aug 16 15:47:36 1996 Michael Meissner * config/rs6000/tm-rs6000.h (FIX_CALL_DUMMY): Cast args to be an integer for type correctness. Fri Aug 16 15:15:37 1996 James G. Smith * config/mips/{vr4300.mt, vr4300el.mt} (SIM): Add -lm when simulator is included. Thu Aug 15 13:44:13 1996 Fred Fish * findvar.c (write_register_pid): Only needed when TARGET_WRITE_PC is not defined. (read_register_pid): Only needed when TARGET_READ_PC is not defined. * hppa-tdep.c (frame_saved_pc): Remove prototype. * infptrace.c (udot_info): Prototype when CHILD_XFER_MEMORY is not defined. * config/xm-aix4.h (aix_resizewindow): Convert old style decl to prototype. * xcoffsolib.c (command.h): Include for needed prototypes. Wed Aug 14 17:54:19 1996 Stu Grossman (grossman@critters.cygnus.com) * config/i386/cygwin32.mh: Set NAT_FILE to nm-empty.h to make native work. Wed Aug 14 02:03:42 1996 Fred Fish From Blair MacIntyre : * hppa-tdep.c (hppa_fix_call_dummy): Use MSYMBOL_TYPE rather than SYMBOL_TYPE on msymbols. * somsolib.c (som_solib_create_inferior_hook): Ditto. * Makefile.in (init.c): Generate with prototypes. * config/pa/tm-hppa.h (frame_saved_pc): Add prototype. * config/rs6000/xm-rs6000.h (aix_resizewindow): Ditto. * config/rs6000/tm-rs6000.h (frame_initial_stack_address): Ditto. (pc_load_segment_name): Ditto. (pop_frame): Ditto. (extract_return_value): Ditto. (is_magic_function_pointer): Ditto. (push_dummy_frame): Ditto. (fix_call_dummy): Ditto. (push_arguments): Ditto. (skip_trampoline_code): Ditto. (aix_process_linenos): Ditto. * config/m68k/tm-cisco.h (get_longjmp_target): Add prototype. * config/m68k/tm-es1800.h: Ditto. * config/m68k/tm-vx68.h: Ditto. * config/m68k/tm-sun3.h: Ditto. * config/m68k/tm-m68kv4.h: Ditto. Tue Aug 13 23:04:36 1996 Fred Fish * config/mips/nm-mips.h (get_longjmp_target): Add prototype. * config/mips/nm-irix3.h (get_longjmp_target): Add prototype. * remote-mips.c (mips_read_processor_type): Remove prototype. * mips-tdep.c (gdb_print_insn_mips): Add prototype and make static. * irix5-nat.c (fetch_core_registers): Add prototype. Mon Aug 12 21:23:44 1996 Fred Fish * remote-pa.c (boot_board): Add dummy params to make type compatible for passing to add_com. * scm-exp.c (scm_lreadr): Ensure svalue is not used uninitialized. * buildsym.c (compare_line_numbers): Change function to match prototype and also what qsort expects. Mon Aug 12 19:19:00 1996 Mark Alexander * remote.c: Make remote_write_size public. * sh-tdep.c (_initialize_sh_tdep): Set remote_write_size to 300 to prevent packet errors with some versions of CMON. Mon Aug 12 16:20:58 1996 Stu Grossman (grossman@critters.cygnus.com) * defs.h: Define CONST_PTR as blank if compiling with Microsoft C, else it's `const'. * c-lang.c c-lang.h ch-lang.c f-lang.c language.c m2-lang.c scm-lang.c: Microsoft C can't hack const pointers. Use CONST_PTR macro instead. * configure configure.in defs.h: Use AC_C_CONST to figure out if the compiler supports const. Gets rid of some cruft in defs.h. * dwarf2read.c: -> "gdb_string.h" * remote-sim.c: Add prototypes. Fix call to gdbsim_kill. * sparcl-tdep.c (download): Add prototypes to write_routine and start_routine args. * mswin/gdbwin.c: Don't include both varargs.h AND stdarg.h. Get rid of varargs.h Include string.h. * (gdbwin_update gdbwin_fputs regs_changed_f bpt_changed_f update): Fix prototypes, fix calls. * (update): Return value for catch_errors. * (run_execute_command togdb_command_from_tty togdb_command): Cleanup catching of errors from calls to execute_command. Also, dup command string to avoid modifying const strings. * (togdb_breakinfo_i_init togdb_breakinfo_i_next): Use 0 instead of NULL when see if b->address isn't set. * (bi_disable_bpt bi_enable_bpt bi_delete_all bi_delete_breakpoint): Add arg to calls to update. * (gui_command): Add prototype. * (mswin_query): Fix prototype. * (_initialize_gdbwin): Dup string to avoid modifying const. * (info_path togdb_get_info_path): Remove const from decls cuz this can't be const (it points at malloc'ed memory). * (togdb_searchpath): Remove const from path. Dup string to avoid modifying const strings. * rindex -> strrchr. * (gdbwin_list_symbols): Regexp param is const. * Fix lots of refs to psymtabs to deref correct pointers. * (togdb_set_breakpoint_sal): Call set_breakpoint_sal with sal, not &sal. * mswin/gdbwin.h (togdb_searchpath togdb_get_info_path toget_set_info_path): Fix prototypes to match reality. * mswin/gui.cpp: Define _beginthreadex and _endthreadex routines with proper prototypes. * mswin/iface.cpp (gdbwin_fputs): Define with correct number of args. * mswin/ser-win32s.c: Fix defs of min and max. * mswin/serdll32.c (OpenComm16): Make cbInQueue and cbOutQueue be USHORT. * (WriteComm16): Change lpBug from LPVOID to LPCSTR. * mswin/serdll32.h: Fix prototypes for OpenComm16 and WriteComm16. Sun Aug 11 20:54:16 1996 Stu Grossman (grossman@critters.cygnus.com) * main.c (main): Make sure command loop is used with cygwin32. * terminal.h: Allow cygwin32 to use termios.h. start-sanitize-gdbtk Fri Aug 9 12:32:53 1996 Tom Tromey * Makefile.in (LIB_INSTALL_DIR): New macro. (TCL): Include @TCL_LD_SEARCH_FLAGS@. end-sanitize-gdbtk Fri Aug 9 12:42:49 1996 Jeffrey A Law (law@cygnus.com) * somread.c (som_symtab_read): Handle secondary definition symbols (aka weak symbols). * config/tm-hppa.h (EXTRACT_RETURN_VALUE): Fix thinko in last change. Thu Aug 8 10:12:36 1996 Stu Grossman (grossman@critters.cygnus.com) * symfile.c (symfile_bfd_open): Change ifdef from __WIN32__ to _WIN32. * somread.c: Rearrange order of includes to fix warnings under hpux-10.10. Also don't include sys/file.h. Wed Aug 7 21:45:52 1996 Stu Grossman (grossman@critters.cygnus.com) * dbxread.c: Don't include param.h or sys/file.h. * (dbx_symfile_read): Determine symfile_relocatable from bfd flags instead of file extension. Also clean up a little bit. Wed Aug 7 17:18:37 1996 Stu Grossman (grossman@critters.cygnus.com) * dwarf2read.c dwarfread.c exec.c infcmd.c infrun.c main.c mdebugread.c os9kread.c source.c top.c utils.c: Don't include param.h or sys/file.h (or unistd.h in some cases). * defs.h exec.c inflow.c remote-array.c remote-e7000.c sparcl-tdep.c terminal.h utils.c: Replace all occurances of __WIN32__, WINGDB, WIN32, etc... with _WIN32. * main.c: Remove #ifndef WINGDB around option processing. Fix bug with passing argc==0 and argv==NULL to getopt. * (main) Remove calls to access() before source_command. Let soure_command handle access errors. * maint.c (maintenance_dump_me): #ifdef out for _WIN32. * symtab.c (operator_chars): Make this global for wingdb. * top.c (disconnect): #ifdef out for _WIN32. * (source_command): If got an error and from_tty, then call print error, else just return quietly. * utils.c (fatal_dump_core): Can't kill ourselves under windows. Just exit. * (pollquit notice_quit): #ifdef out stuff that doesn't exist under windows. Wed Aug 7 09:59:19 1996 Jeffrey A Law (law@cygnus.com) * config/pa/tm-hppa.h (EXTRACT_RETURN_VALUE): Tweak for structures > 4 bytes in size. * valops.c (call_function_by_hand): Handle aligning stacks that grow up correctly. * config/pa/tm-hppa.h (USE_STRUCT_CONVENTION): Define. (STACK_ALIGN): Define. * hppa-tdep.c (hppa_alignof): Don't demand a minumim two byte alignment on structs/unions. Sun Aug 4 16:22:42 1996 Fred Fish * config/powerpc/nm-aix.h (PTRACE_ARG3_TYPE): Define to "int *", which is the documented type under at least AIX 3 and AIX 4. Sat Aug 3 04:02:46 1996 Fred Fish * config/alpha/alpha-osf3.mh (XM_FILE): Change from xm-alpha.h to xm-alphaosf.h. (MMALLOC_CFLAGS): Define NO_MMCHECK to not install consistency checks. start-sanitize-gdbtk Thu Aug 1 20:35:01 1996 Tom Tromey * gdbtk.c (mainWindow): Deleted. (cleanup_init): Don't destroy main window. (gdbtk_init): Main window now created by Tk_Init. * configure.in: Most X checks now handled automatically by Tk. Use new macros to find Tcl/Tk. * aclocal.m4: New version for new Tcl/Tk; from Don Libes. * config.in, configure: Regenerated. * Makefile.in (TCL, TCL_CFLAGS, TK, TK_CFLAGS, X11_CFLAGS, X11_LDFLAGS, X11_LIBS): Changed for new Tcl and Tk. end-sanitize-gdbtk Thu Aug 1 10:11:34 1996 Fred Fish * config/mips/tm-mips.h (TM_MIPS_H): Enclose file contents in this, define when contents are included. (mips_read_processor_type): Add prototype. * config/mips/xm-mips.h: Remove strdup decl, now in gdb_string.h * mdebugread.c (ecoff_relocate_efi): Add prototype. (fixup_sigtramp): Only needed when TM_MIPS_H is defined. start-sanitize-gdbtk Thu Aug 1 16:12:05 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) * Makefile.in (gdbtk.tcl): put in $(datadir), not $(libdir). end-sanitize-gdbtk Wed Jul 31 20:21:24 1996 Fred Fish * rs6000-nat.c (add_vmap): Return 0 to caller rather than random value. (vmap_ldinfo): Ensure got_exec_file is not used uninitialized. (fetch_core_registers): Add prototype. (vmap_symtab): Ditto. (objfile_symbol_add): Ditto. (add_vmap): Ditto. (vmap_ldinfo): Ditto. (vmap_exec): Ditto. Tue Jul 30 17:57:46 1996 Stan Shebs * stabsread.c (get_substring): Declare second arg as int. * remote-es.c: Include gdb_string.h after defs.h. Mon Jul 29 21:13:20 1996 Fred Fish * rs6000-tdep.c (push_arguments): Remove unused variable "pc". (branch_dest): Remove unused variable "offset". (pop_dummy_frame): Add prototype and make static. (push_arguments): Guard against using len uninitialized. (push_arguments): Guard against using arg uninitialized. (frame_saved_pc): Remove unused variable "frameless". (free_loadinfo): Ifdef out unused function. * xcoffread.c (compare_lte): Change prototype and function to be correct type for passing to qsort. (add_stab_to_list): Ifdef out unused function and prototype. (compare_lte): Add prototype (arrange_linetable): Ditto. (record_include_begin): Ditto. (record_include_end): Ditto. (process_linenos): Ditto. (xcoff_next_symbol_text): Ditto. (scan_xcoff_symtab): Ditto. (xcoff_initial_scan): Ditto. * mips-tdep.c (mips_read_processor_type): Add parens around bitwise-and operands in comparison; previous expression always evaluated to 0 because of equality comparison of two constants. * rs6000-tdep.c (skip_prologue): Add missing parens around operands of logical-or so that first operand does not bind to previous logical-and. * configure.in: Expand "long long" test to include code that triggers known problem on HPUX with native compiler. (configure): Regenerated. Mon Jul 29 18:12:27 1996 Jeffrey A Law (law@cygnus.com) * somsolib.c (som_solib_create_inferior_hook): Don't warn if __d_pid can't be found. Sun Jul 28 10:46:39 1996 Fred Fish * config/mips/tm-mips.h (struct frame_info): Forward decl. (struct type): Ditto. (struct value): Ditto. * config/mips/tm-mips.h (sigtramp_address): Move extern decl from mips-tdep.c to here. (sigtramp_end): Ditto. (fixup_sigtramp): Ditto. * config/mips/tm-mips.h (init_extra_frame_info): Add prototype. (mips_frame_chain): Ditto. (mips_step_skips_delay): Ditto. (mips_frame_saved_pc): Ditto. (mips_find_saved_regs): Ditto. (mips_frame_num_args): Ditto. (mips_pop_frame): Ditto. (mips_extract_return_value): Ditto. (mips_store_return_value): Ditto. (mips_push_dummy_frame): Ditto. (mips_push_arguments): Ditto. (mips_do_registers_info): Ditto. (ecoff_relocate_efi): Ditto. (ecoff_relocate_efi): Ditto. * irix4-nat.c (fetch_core_registers): Add prototype. * mips-tdep.c (read_next_frame_reg): Add prototype (heuristic_proc_start): Ditto. (heuristic_proc_desc): Ditto. (mips_print_register): Ditto. * config/mips/nm-irix5.h (procfs_set_watchpoint): Add prototype. (procfs_stopped_by_watchpoint): Ditto. * config/mips/nm-irix4.h (procfs_set_watchpoint): Add prototype. (procfs_stopped_by_watchpoint): Ditto. * config/alpha/tm-alpha.h (ecoff_relocate_efi): Add prototype. (struct symbol): Add forward decl for prototype. * breakpoint.c (internal_breakpoint_number): Only needed if GET_LONGJMP_TARGET or SOLIB_ADD is defined. * objfiles.c (ecoff_relocate_efi): Remove prototype. Sat Jul 27 17:47:35 1996 Fred Fish * configure.in: Add test for "long long" support. * configure: Regenerate with autoconf. * acconfig.h: Add CC_HAS_LONG_LONG * config.in: Regenerate with autoheader. * config/mips/tm-mips64.h (FORCE_LONG_LONG): Remove * config/sparc/tm-sp64.h (CC_HAS_LONG_LONG): Remove. * config/mips/tm-vr4300el.h (CC_HAS_LONG_LONG): Remove. * config/mips/tm-vr4300.h (CC_HAS_LONG_LONG): Remove. * config/mips/xm-irix5.h (CC_HAS_LONG_LONG): Remove (PRINTF_HAS_LONG_LONG): Remove. (FORCE_LONG_LONG): Remove. * config/powerpc/xm-aix.h (UINT_MAX): Undef and use gdb's version. * config/convex/xm-convex.h (CC_HAS_LONG_LONG): Remove (PRINTF_HAS_LONG_LONG): Remove. * config/xm-nbsd.h (CC_HAS_LONG_LONG): Remove. (PRINTF_HAS_LONG_LONG): Remove. * config/pa/tm-hppa.h (GET_FIELD): Put parens around subtraction inside shift. Put parens around subtraction in operand of bitwise and. (struct frame_info): Forward declare if __STDC__ defined. (frame_saved_regs): Ditto. (struct value): Ditto. (struct type): Ditto. (struct inferior_status): Ditto. (init_extra_frame_info): Add prototype. (skip_prologue): Ditto. (frameless_function_invocation): Ditto. (frame_chain): Ditto. (frame_chain_valid): Ditto. (saved_pc_after_call): Ditto. (hppa_fix_call_dummy): Ditto. (hppa_push_arguments): Ditto. (pa_do_registers_info): Ditto. (in_solib_call_trampoline): Ditto. (in_solib_return_trampoline): Ditto. (push_dummy_frame): Ditto. * convex-tdep.c (decout): Use print_longest rather than fprintf_filtered. * defs.h: Remove use of FORCE_LONG_LONG and __GNUC__ to set CC_HAS_LONG_LONG. (INT_MIN): Fix so it works correctly when assigned to a long long. * valprint.c (longest_to_int): Rewrite to remove dependence on INT_MIN and INT_MAX. (print_longest): Rewrite the code that falls back to synthesized hex output when LONGEST value is not representable as in a long and printf doesn't support printing long longs. * ch-valprint.c (chill_val_print): Cast 2nd arg of chill_print_type_scalar to LONGEST. chill_print_type_scalar): Make static and add prototype. * hppa-tdep.c (get_field): Ifdef out unused function. (set_field): Ditto. (extract_3): Ditto. (extract_5_store): Ditto. (extract_11): Ditto. (extract_12): Ditto. (deposit_17): Ditto. (extract_14): Convert to static and add prototype. (deposit_14): Ditto. (extract_21): Ditto. (deposit_21): Ditto. (extract_17): Ditto. (extract_5r_store): Ditto. (extract_5R_store): Ditto. (extract_5_load): Ditto. (find_proc_framesize): Ditto. (find_dummy_frame_regs): Ditto. (sign_extend): Ditto. (find_unwind_entry): Add prototype. (find_return_regnum): Ditto. (unwind_command): Ditto. (find_dummy_frame_regs): Add parens around subtraction in operand of bitwise-and. (skip_prologue): Add parens around operands of logical-and inside operand of logical-or. (sign_extend): Add parens around operands of subtraction inside operand of shift. (low_sign_extend): Ditto. * top.c (filename_completer): Convert old style decl of filename_completion_function into prototype. * f-lang.c (patch_common_entries): Ifdef out unused function. * stabsread.c (read_cfront_baseclasses): Remove unused local variable "msg_noterm". (resolve_cfront_continuation): Remove unused local variable "fip". (read_type): Remove unused variable xtypenums. (read_cfront_static_fields): Remove unused variable "i". (read_cfront_static_fields): Remove unused variable "nfields". (read_cfront_member_functions): Add missing comment terminator. (read_cfront_static_fields): Return 1 rather than random value. (read_cfront_baseclasses): Ditto. (read_cfront_baseclasses): Ditto. (read_cfront_baseclasses): Ditto. * somsolib.c (som_solib_create_inferior_hook): Remove unused variable "u". (som_solib_create_inferior_hook): Remove unused variable shadow_contents. (language.h): Add for needed prototypes. (som_solib_sharedlibrary_command): Add prototype. * hpread.c: (hpread_read_array_type): Add prototype. * somread.c (hpread_build_pysmtabs): Add prototype. (hpread_symfile_finish): Ditto. (hpread_symfile_init): Ditto. * hppah-nat.c (fetch_register): Convert old style decl to prototype. (gdbcore.h): Include for needed prototypes. (fetch_register): Remove unused variable "mess". * remote-pa.c (get_offsets): Ifdef out unused function. (remote_start_remote): Remove unused variable "timeout". (boot_board): Add prototype. (reaad_frame): Add prototype. (getpkt): Remove unused variable "bp". (remote_kill): Add prototype. (remote_mourn): Add prototype. (remote_insert_breakpoint): Add prototype. (remote_remove_breakpoint): Add prototype. * valops.c (value_push): Only use if PUSH_ARGUMENTS is not defined. * infcmd.c (do_registers_info): Only need prototype if DO_REGISTERS_INFO is not defined. (breakpoint_auto_delete_contents): Only need if CALL_DUMMY_BREAKPOINT_OFFSET is defined. Sat Jul 27 08:49:49 1996 Fred Fish * xcoffread.c (xcoff_end_psymtab): Add textlow_not_set parameter. (END_PSYMTAB): Ditto. (scan_xcoff_symtab): Call xcoff_end_psymtab with textlow_not_set. Fri Jul 26 14:07:37 1996 Ian Lance Taylor * printcmd.c (_initialize_printcmd): Initialize tm_print_insn_info.flavour. start-sanitize-gdbtk * gdbtk.c (gdb_disassemble): Initialize di.flavour. end-sanitize-gdbtk Thu Jul 25 19:41:31 1996 Fred Fish * Makefile.in (scm-valprint.o): Depends upon gdbcore_h. (arm-tdep.o): Ditto. (dcache.o): Ditto. (i386ly-tdep.o): Ditto. (i960-tdep.o): Ditto. (m68k-tdep.o): Ditto. (nindy-tdep.o): Ditto. (scm-lang.o): Ditto. (w65-tdep.o): Ditto. (z8k-tdep.o): Ditto. (m68k-tdep.o): Depends upon value_h and gdb_string.h (m2-valprint.o): Depends upon m2-lang.h. (sparc-tdep.o): Depends upon gdb_string.h (valprint.o): Depends upon valprint.h * remote-e7000.c (notice_quit): Remove prototype. * top.c (initialize_targets): Remove prototype, now in target.h. * stabsread.c (resolve_cfront_continuation): Remove prototype. * dbxread.c (resolve_cfront_continuation): Remove prototype. * symfile.h (set_demangling_style): Remove prototype. * config/tm-sysv4.h (in_plt_section): Remove prototype, in objfiles.h. * config/sparc/tm-sparc.h (single_step): Remove extern decl, now in target.h. * config/arc/tm-arc.h (one_stepped, single_step): Remove extern decls, now in target.h. * ser-unix.c (hardwire_restore): Remove obsolete prototype. * sparc-tdep.c (single_step): Remove forward decl of isbranch. * scm-lang.c (find_function_in_inferior): Remove prototype. (value_allocate_space_in_inferior): Ditto. * infrun.c (write_pc_pid): Remove prototype, now in inferior.h. * defs.h (strchr): Remove declarations, they are declared in gdb_string.h also. (strrchr): Ditto. (strstr): Ditto. (strtok): Ditto. (strerror): Ditto. * f-valprint.c (f77_print_array_1): Remove extra arg that was being passed to f77_print_array_1. * gdbtypes.c (add_name): Remove unused variables lenstrlen and lenstr. * scm-exp.c (scm_istr2int): Remove unused variable "j". (scm_parse): Remove unused variable "str". * hp300ux-nat.c (store_inferior_register): Remove unused variable "buf". (store_inferior_registers): Remove unnecessary decl "registers". * m68k-tdep.c (m68k_pop_frame): Remove unused variable "fi". * scm-lang.c (scm_get_field): Remove unused variable "val". (scm_lookup_name): Remove unused variable "symval". * objfiles.c (map_to_file): Remove unused local variable "tempfd". * procfs.c (do_attach, do_detach): Remove unused variable "result". (last_resume_pid): Remove unused static variable. * alpha-tdep.c (alpha_linux_sigtramp_offset): Remove unused variable "res". * objfiles.c (map_to_address): Remove unused function. * f-valprint.c (print_max): Remove extraneous extern decl, in valprint.h. (calc_f77_array_dims): Remove extraneous prototype, in f-lang.h. * ch-exp.c (write_lower_upper_value): Remove prototype for type_lower_upper. * gdbtypes.c (cfront_mangle_name): #ifdef out unused function. * ch-exp.c (parse_mode_call): Ditto. * f-valprint.c (there_is_a_visible_common_named): Ditto. * f-lang.c (clear_function_list): Ditto. (get_bf_for_fcn): Ditto. (clear_bf_list): Ditto. (add_common_block): Ditto. (patch_all_commons_by_name): Ditto. (find_first_common_named): Ditto. (add_common_entry): Ditto. (allocate_saved_function_node): Ditto. (allocate_saved_bf_node): Ditto. (allocate_common_entry_node): Ditto. (allocate_saved_f77_common_node): Ditto. * arm-tdep.c (gdbcore.h): Include for necessary prototypes. * dcache.c (gdbcore.h): Ditto. * i386ly-tdep.c (gdbcore.h): Ditto. * i960-tdep.c (gdbcore.h): Ditto. * m2-valprint.c (m2-lang.h): Ditto. * m68k-tdep.c (gdbcore.h): Ditto. (value.h): Ditto. (gdb_string.h): Ditto. * nindy-tdep.c (gdbcore.h): Ditto. * scm-lang.c (gdbcore.h): Ditto. * scm-valprint.c (gdbcore.h): Ditto. * w65-tdep.c (gdbcore.h): Ditto. * z8k-tdep.c (gdbcore.h): Ditto. * sparc-tdep.c (gdb_string.h): Include. * valprint.c (valprint.h): Include. * config/xm-lynx.h: Remove part of comment about INT_MIN redefined warnings from defs.h, since INT_MIN define in defs.h is now protected by #ifndef INT_MIN. * config/i386/xm-i386bsd.h: Ditto. * config/m68k/xm-hp300bsd.h: Ditto. * config/m68k/xm-news.h: Ditto. * config/pa/xm-hppah.h (INT_MIN): Remove bogus INT_MIN definition as 0x80000000. The macro in defs.h is better. * config/i386/xm-i386m3.h (INT_MIN): Ditto. * config/i386/xm-i386mach.h (INT_MIN): Ditto. * config/ns32k/xm-ns32km3.h (INT_MIN): Ditto. * config/pa/xm-hppab.h: Ditto. * core-aout.c (fetch_core_registers): Add prototype. * hp300ux-nat.c (fetch_inferior_register): Ditto. (store_inferior_register_1): Ditto. (store_inferior_register): Ditto. * config/m68k/tm-m68k.h (find_saved_regs): Ditto. *scm-valprint.c (c_val_print): Ditto. * procfs.c (add_fd): Ditto. (remove_fd): Ditto. (wait_fd): Ditto. (sigcodename): Ditto. (sigcodedesc): Ditto. (procfs_kill_inferior): Ditto. (procfs_xfer_memory): Ditto. (procfs_store_registers): Ditto. (create_procinfo): Ditto. (procfs_init_inferior): Ditto. (proc_set_exec_trap): Ditto. (procfs_attach): Ditto. (procfs_detach): Ditto. (procfs_prepare_to_store): Ditto. (procfs_files_info): Ditto. (procfs_open): Ditto. (procfs_wait): Ditto. (procfs_fetch_registers): Ditto. (procfs_mourn_inferior): Ditto. (procfs_can_run): Ditto. (procfs_thread_alive): Ditto. (procfs_stop): Ditto. * alpha-nat.c (fetch_core_registers): Ditto. * config/alpha/tm-alpha.h (alpha_osf_skip_sigtramp_frame): Ditto. * objfiles.c (ecoff_relocate_efi): Ditto. * inflow.c (pass_signal): Ditto. (handle_sigio): Ditto. * annotate.c (breakpoint_changed): Ditto. * callback.c (wrap): Ditto. (fdbad): Ditto. (fdmap): Ditto. * utils.c (malloc_botch): Ditto. (fputs_maybe_filtered): Ditto. (vfprintf_maybe_filtered): Ditto. * defs.h (notice_quit): Ditto. * defs.h (xmalloc, xrealloc): Ditto. * top.c (stop_sig): Ditto. (init_signals): Ditto. (user_defined_command): Ditto. (source_cleanup_lines): Ditto. (dont_repeat_command): Ditto. (serial_log_command): Ditto. (disconnect): Ditto. * target.h (initialize_targets): Ditto. * os9kread.c (read_minimal_symbols): Ditto. * mdebugread.c (mdebug_psymtab_to_symtab): Ditto. (fdr_name): Ditto. (push_parse_stack): Ditto. (pop_parse_stack): Ditto. (is_pending_symbol): Ditto. (add_pending): Ditto. * serial.c (serial_logchar): Ditto. (serial_interface_lookup): Ditto. * serial.h (serial_log_command): Ditto. * f-valprint.c (info_common_command): Ditto. * gdbtypes.h (print_type_scalar): Ditto. * scm-valprint.c (scm_scmlist_print): Ditto. (scm_ipruk): Ditto. * scm-lang.c (scm_printstr): Ditto. (in_eval_c): Ditto. (evaluate_subexp_scm): Ditto. * scm-exp.c (scm_read_token): Ditto. (scm_skip_ws): Ditto. (scm_lreadparen): Ditto. * m2-lang.c (emit_char): Ditto. (m2_printchar): Ditto. (m2_printstr): Ditto. (m2_create_fundamental_type): Ditto. * f-lang.c (emit_char): Ditto. (f_printchar): Ditto. (f_printstr): Ditto. (f_create_fundamental_type): Ditto. * ch-lang.c (chill_printchar): Ditto. (chill_printstr): Ditto. (chill_create_fundamental_type): Ditto. (value_chill_length): Ditto. (value_chill_card): Ditto. (value_chill_max_min): Ditto. (evaluate_subexp_chill): Ditto. * ch-exp.c (PEEK_TOKEN): Ditto. (peek_token_): Ditto. (forward_token_): Ditto. (parse_case_label): Ditto. (parse_opt_untyped_expr): Ditto. (parse_unary_call): Ditto. (parse_call): Ditto. (parse_named_record_element): Ditto. (parse_tuple_element): Ditto. (parse_opt_element_list): Ditto. (parse_tuple): Ditto. (parse_primval): Ditto. (parse_operand6): Ditto. (parse_operand5): Ditto. (parse_operand4): Ditto. (parse_operand3): Ditto. (parse_operand2): Ditto. (parse_operand1): Ditto. (parse_operand0): Ditto. (parse_expr): Ditto. (parse_then_alternative): Ditto. (parse_else_alternative): Ditto. (parse_if_expression): Ditto. (parse_untyped_expr): Ditto. (growbuf_by_size): Ditto. (match_simple_name_string): Ditto. (decode_integer_value): Ditto. (decode_integer_literal): Ditto. (match_float_literal): Ditto. (match_float_literal): Ditto. (match_string_literal): Ditto. (match_character_literal): Ditto. (match_integer_literal): Ditto. (match_bitstring_literal): Ditto. (write_lower_upper_value): Ditto. * ch-lang.h (type_lower_upper): Ditto. * c-lang.c (emit_char): Ditto. * dwarfread.c (free_utypes): Ditto. * stabsread.h (resolve_cfront_continuation): Ditto. * stabsread.c (get_substring): Ditto. (read_one_struct_field): Ditto. * stabsread.h (process_later): Ditto. * demangle.c (set_demangling_command): Ditto. * defs.h (set_demangling_style): Ditto. * maint.c (maintenance_info_command): Ditto. (print_section_table): Ditto. (maintenance_info_sections): Ditto. (maintenance_print_command): Ditto. * symtab.h (maintenance_print_statistics): Ditto. * objfiles.h (in_plt_section): Ditto. * objfiles.c (add_to_objfile_sections): Ditto. * bcache.c (hash): Ditto. (lookup_cache): Ditto. * exec.c (bfdsec_to_vmap): Ditto. (ignore): Ditto. * f-exp.y (growbuf_by_size, match_string_literal): Ditto. * language.c (unk_lang_printchar): Ditto. (unk_lang_printstr): Ditto. (unk_lang_create_fundamental_type): Ditto. (unk_lang_print_type): Ditto. (unk_lang_val_print): Ditto. (unk_lang_value_print): Ditto. * target.c (update_current_target): Ditto. (debug_to_open): Ditto. (debug_to_close): Ditto. (debug_to_attach): Ditto. (debug_to_detach): Ditto. (debug_to_resume): Ditto. (debug_to_wait): Ditto. (debug_to_fetch_registers): Ditto. (debug_to_store_registers): Ditto. (debug_to_prepare_to_store): Ditto. (debug_to_xfer_memory): Ditto. (debug_to_files_info): Ditto. (debug_to_insert_breakpoint): Ditto. (debug_to_remove_breakpoint): Ditto. (debug_to_terminal_init): Ditto. (debug_to_terminal_inferior): Ditto. (debug_to_terminal_ours_for_output): Ditto. (debug_to_terminal_ours): Ditto. (debug_to_terminal_info): Ditto. (debug_to_kill): Ditto. (debug_to_load): Ditto. (debug_to_lookup_symbol): Ditto. (debug_to_create_inferior): Ditto. (debug_to_mourn_inferior): Ditto. (debug_to_can_run): Ditto. (debug_to_notice_signals): Ditto. (debug_to_thread_alive): Ditto. (debug_to_stop): Ditto. start-sanitize-gdbtk * gdbtk.c (null_routine): Ditto. (gdbtk_flush): Ditto. (gdbtk_fputs): Ditto. (gdbtk_query): Ditto. (gdbtk_readline): Ditto. (gdbtk_readline_end): Ditto. (gdb_get_breakpoint_list): Ditto. (gdb_get_breakpoint_info): Ditto. (breakpoint_notify): Ditto. (gdbtk_create_breakpoint): Ditto. (gdbtk_delete_breakpoint): Ditto. (gdbtk_modify_breakpoint): Ditto. (gdb_loc): Ditto. (gdb_eval): Ditto. (gdb_sourcelines): Ditto. (map_arg_registers): Ditto. (get_register_name): Ditto. (gdb_regnames): Ditto. (get_register): Ditto. (gdb_fetch_registers): Ditto. (register_changed_p): Ditto. (gdb_changed_register_list): Ditto. (gdb_cmd): Ditto. (call_wrapper): Ditto. (gdb_listfiles): Ditto. (gdb_stop): Ditto. (gdbtk_dis_asm_read_memory): Ditto. (compare_lines): Ditto. (gdb_disassemble): Ditto. (tk_command): Ditto. (cleanup_init): Ditto. (gdbtk_interactive): Ditto. (x_event): Ditto. (gdbtk_wait): Ditto. (gdbtk_call_command): Ditto. (tk_command_loop): Ditto. (gdbtk_init): Ditto. end-sanitize-gdbtk * breakpoint.h (set_breakpoint_sal): Ditto. * remote-utils.c (usage): Ditto. * remote.c (set_thread): Ditto. (remote_thread_alive): Ditto. (get_offsets): Ditto. (read_frame): Ditto. (remote_insert_breakpoint): Ditto. (remote_remove_breakpoint): Ditto. * sparc-nat.c (fetch_core_registers): Ditto. * corelow.c (add_to_thread_list): Ditto. (ignore): Ditto. * inftarg.c (proc_wait): Ditto. * infptrace.c (udot_info): Ditto. (fetch_register): Ditto. * ser-unix.c (hardwire_noflush_set_tty_state): Ditto. (hardwire_print_tty_state): Ditto. (hardwire_flush_output): Ditto. (hardwire_flush_input): Ditto. (hardwire_send_break): Ditto. (hardwire_setstopbits): Ditto. * ser-tcp.c (tcp_return_0): Ditto. (tcp_noflush_set_tty_state): Ditto. (tcp_print_tty_state): Ditto. * solib.c (match_main): Ditto. * gdbtypes.c (print_bit_vector): Ditto. (print_arg_types): Ditto. (dump_fn_fieldlists): Ditto. (print_cplus_stuff): Ditto. * symfile.h (entry_point_address): Ditto. * symfile.c (decrement_reading_symtab): Ditto. * valops.c (value_arg_coerce): Ditto. * value.h (find_function_in_inferior): Ditto. (value_allocate_space_in_inferior): Ditto. * values.c (vb_match): Ditto. * thread.c (info_thread_command): Ditto. (restore_current_thread): Ditto. (thread_apply_all_command): Ditto. (thread_apply_command): Ditto. * inferior.h (write_pc_pid): Ditto. * infrun.c (delete_breakpoint_current_contents): Ditto. * breakpoint.c (print_it_normal): Ditto. (watchpoint_check): Ditto. (print_it_done): Ditto. (print_it_noop): Ditto. (maintenance_info_breakpoints): Ditto. (create_longjmp_breakpoint): Ditto. (hbreak_command): Ditto. (thbreak_command): Ditto. (watch_commnd_1): Ditto. (rwatch_command): Ditto. (awatch_command): Ditto. (do_enable_breakpoint): Ditto. * ch-valprint.c (chill_val_print_array_elements): Ditto. * eval.c (evaluate_subexp): Ditto. (get_label): Ditto. (evaluate_struct_tuple): Ditto. * eval.c (init_array_element): Ditto. * alpha-tdep.c (push_sigtramp_desc): Add prototype and make static. * breakpoint.c (hw_breakpoint_used_count): Ditto. (hw_watchpoint_used_count): Ditto. * findvar.c (write_register_gen): Ditto. (read_register_pid): Ditto. * symtab.c (cplusplus_hint): Ditto. * infcmd.c (breakpoint_auto_delete_contents): Ditto. * ch-valprint.c (chill_print_type_scalar): Ditto. * gdbtypes.c (add_name): Ditto. (add_mangled_type): Ditto. (cfront_mangle_name): Ditto. * sparc-tdep.c (isbranch): Ditto. * inftarg.c (child_stop): Ditto. * win32-nat.c (child_stop): Ditto. * mac-nat.c (child_stop): Ditto. * remote-utils.c (sr_com): Ditto. * dbxread.c (process_now): Ditto. * ch-exp.c (require): Ditto. (check_token): Ditto. (expect): Ditto. (parse_mode_call): Ditto. (parse_mode_or_normal_call): Ditto. * scm-lang.c (scm_lookup_name): Ditto * f-lang.c (allocate_saved_bf_node): Ditto. (allocate_saved_function_node): Ditto. (allocate_saved_f77_common_node): Ditto. (allocate_common_entry_node): Ditto. (add_common_block): Ditto. (add_common_entry): Ditto. (find_first_common_named): Ditto. (patch_common_entries): Ditto. (patch_all_commons_by_name): Ditto. (clear_bf_list): Ditto. (get_bf_for_fcn): Ditto. (clear_function_list): Ditto. * scm-exp.c (scm_istr2int): Ditto. (scm_istring2number): Ditto. * scm-valprint.c (scm_inferior_print): Ditto. * f-typeprint.c (print_equivalent_f77_float_type): Ditto. * f-valprint.c (f77_get_dynamic_length_of_aggregate): Ditto. (f77_create_arrayprint_offset_tbl): Ditto. (f77_print_array_1): Ditto. (f77_print_array): Ditto. (list_all_visible_commons): Ditto. (there_is_a_visible_common_named): Ditto. * mdebugread.c (ecoff_relocate_efi): Ditto. * callback.c (os_close): Ditto. (os_get_errno): Ditto. (os_isatty): Ditto. (os_lseek): Ditto. (os_open): Ditto. (os_read): Ditto. (os_read_stdin): Ditto. (os_write): Ditto. (os_write_stdout): Ditto. (os_rename): Ditto. (os_system): Ditto. (os_time): Ditto. (os_unlink): Ditto. (os_shutdown): Ditto. (os_init): Ditto. (os_printf_filtered): Ditto. * scm-lang.h (scm_parse): Change old style decl to prototype. * config/alpha/tm-alphalinux.h (alpha_linux_sigtramp_offset): Ditto. * top.c (init_proc): Ditto. (query_hook): Ditto. (error_hook): Ditto. * f-lang.c (c_value_print): Ditto. * ch-exp.c (parse_expression): Ditto. (parse_primval): Ditto. (parse_untyped_expr): Ditto. (parse_opt_untyped_expr): Ditto. (ch_lex): Ditto. * config/sparc/tm-sparc.h (sparc_init_extra_frame_info): Ditto. (sparc_frame_saved_pc): Ditto. (sparc_push_dummy_frame): Ditto. (sparc_pop_frame): Ditto. * defs.h (fclose): Ditto. (atof): Ditto. (error_hook): Ditto. * arc-tdep.c (single_step): Change arg to type "enum target_signal". * rs6000-tdep.c (single_step): Ditto. * sparc-tdep.c (single_step): Ditto. * breakpoint.c (cleanup_executing_breakpoints): Change unused arg type to PTR which is what make_cleanup expects. * utils.c (null_cleanup): Change arg type to PTR. * defs.h (null_cleanup): Change prototype to match actual function. * config/sparc/tm-sparc.h (struct frame_info): Move forward decl. * ch-valprint.c (chill_val_print): Cast 2nd arg of chill_print_type_scalar to LONGEST. * infrun.c (wait_for_inferior): Have empty switch case for BPSTAT_WHAT_CHECK_SHLIBS when SOLIB_ADD is not defined. (stop_on_solib_events): Only needed if SOLIB_ADD is defined. * infcmd.c (attach_command): Only need auto_solib_add if SOLIB_ADD is defined. * symfile.c (generic_load): Scan long int using a long int spec, not an int spec. * infptrace.c (udot_info): Only need local variables if KERNEL_U_SIZE is defined. (fetch_register): Only need function if FETCH_INFERIOR_REGISTERS is not defined. * inflow.c (handle_sigio): Only need prototype when the actual function is compiled in. * valprint.c (longest_to_int): Expand error message to be separate messages for args larger than largest signed int and args smaller than smallest signed int. * valprint.c (print_longest): Fix problems with support for case where compiler supports type "long long" but the runtime doesn't support printing them with "%ll". * scm-valprint.c (scm_scmlist_print, scm_scmval_print): Change return types to void since we don't actually return anything meaningful and callees ignore the values anyway. * procfs.c (modify_inherit_on_fork_flag): Enclose pr_flags in PIOCSET ifdef. (modify_run_on_last_close_flag): Ditto. (wait_fd): Enclose local variables "num_fds" and "i" LOSING_POLL ifdef * alpha-tdep.c (push_sigtramp_desc): Return proc_desc rather than random value. * infrun.c (wait_for_inferior): Ensure random_signal is not used uninitialized. * valops.c (call_function_by_hand): Ensure struct_addr is not used uninitialized. * breakpoint.c (watch_command_1): Ensure prev_frame is not used uninitialized. * utils.c (vfprintf_maybe_filtered): Change second arg from "char *" to "const char *". start-sanitize-gdbtk * gdbtk.c (gdb_fetch_registers): Cast fourth arg to map_arg_registers to proper pointer type, from int. (gdbtk_query): Change first arg to "const char *" from "char *". end-sanitize-gdbtk * infptrace.c (udot_info): Add two dummy args so that the type is correct for passing to add_info. * f-lang.c (saved_fcn): Move decl to head of file so it can be used in prototypes. (saved_bf_symnum): Ditto. (SAVED_FUNCTION): Ditto. (SAVED_FUNCTION_PTR): Ditto. (SAVED_BF): Ditto. (SAVED_BF_PTR): Ditto. * ch-exp.c (parse_named_record_element): Build error message in temporary buffer before passing it to expect, rather than passing wrong number of args to expect. * demangle.c (set_demangling_style): Call set_demangling_command with correct number of arguments. * inferior.h (terminal_init_inferior_with_pgrp): Change arg type to int to match actual function. (os_isatty): Call fdmap with right number of arguments, was missing the host_callback* arg. * target.c (cleanup_target): Prototype all functions casts. * target.h (one_stepped, single_step): Declare here and convert single_step to prototype. * infrun.c (one_stepped, single_step): Don't declare externs here, they have moved to target.h. * eval.c (init_array_element): Declare previously undeclared last two args as LONGEST. * dcache.c (dcache_xfer_memory): Change xfunc decls to prototype form. start-sanitize-gdbtk * gdbtk.c (register_changed_p): Remove unused local variable "buf". end-sanitize-gdbtk Thu Jul 25 16:11:54 1996 Doug Evans * dsrec.c (load_srec): Protect ANSI style function parms with PARAMS. Mon Jul 22 18:13:27 1996 Stu Grossman (grossman@critters.cygnus.com) * Makefile.in (os9kread.o): Remove dependency on partial-stab.h. * dbxread.c (read_dbx_symtab end_psymtab), partial-stab.h: Don't use partial_symtab->textlow==0 as a flag, as 0 is a legitimate text address. Use a seperate flag (textlow_not_set) instead. This makes stabs in ELF .o files work a lot better. * mdebugread.c xcoffread.c: Define textlow_not_set for partial-stab.h. * stabsread.h (end_psymtab): Add textlow_not_set arg to prototype. start-sanitize-gdbtk Sat Jul 20 17:46:40 1996 Fred Fish * gdbtk.tcl (files_command): Reorder the binding tags for the listbox widget to avoid referencing the listbox after the containing widget has been destroyed by the action of a previous binding. end-sanitize-gdbtk Sat Jul 20 10:41:06 1996 Fred Fish * dwarf2read.c (struct filenames): Change internal "struct file" to "struct fileinfo" to avoid conflict with "struct file" in on HPUX and Solaris. start-sanitize-gdbtk Sat Jul 20 10:09:28 1996 Fred Fish * gdbtk.tcl (delete_expr): Unset corresponding element of expr_update_list when destroying an expression. (create_expr_window): Initialize expr_num, delete_expr_num, and expr_update_list here when each new expression window is created, rather than once at startup. end-sanitize-gdbtk Fri Jul 19 14:05:57 1996 Stan Shebs * dwarf2read.c: New file, DWARF 2 reader originally contributed by Brent Benson, with additions by Gary Funck and Jerry Kreuscher. * Makefile.in (COMMON_OBS): Add dwarf2read.o. (SFILES): Add dwarf2read.c. (dwarf2read.o): Add build rule. * symfile.h (dwarf2_has_info, dwarf2_build_psymtabs): Declare exported functions. * elfread.c (elf_symfile_read): Call them. (elf_symtab_read) [HARRIS_TARGET]: Skip some special symbols. Thu Jul 18 01:22:01 1996 Geoffrey Noer * symfile.c (symfile_bfd_open): * exec.c (exec_file_command): for __GO32__ and __WIN32__ systems, free the user from having to type the .exe extension. Wed Jul 17 06:54:50 1996 Mark Alexander * mon960-rom.c: Shorten the mon960_inits string to a single carriage return; this prevents a hang on connecting immediately after powerup, when MON960 is attempting autobaud detection. Tue Jul 16 23:47:04 1996 Mark Alexander * a29k-tdep.c (get_saved_register): Allow PC to be modified when innermost frame is selected, but not in outer frames. Tue Jul 16 23:37:25 1996 Stu Grossman (grossman@critters.cygnus.com) * command.c (do_setshow_command): Don't segfault when showing var_string and var_string_noescape vars that are NULL. Mon Jul 15 16:55:48 1996 Doug Evans * win32-nat.c (handle_load_dll): dos_path_to_unix_path renamed to cygwin32_conv_to_posix_path. (child_create_inferior): unix_path_to_dos_path renamed to cygwin32_conv_to_win32_path. Rewrite code to translate PATH. Mon Jul 15 16:44:05 1996 Stu Grossman (grossman@critters.cygnus.com) * defs.h printcmd.c: Create global disassemble_info structure tm_print_insn_info. start-sanitize-gdbtk * gdbtk.c (gdb_disassemble): Setup di.mach from tm_print_insn_info.mach, and set endian from TARGET_BYTE_ORDER. end-sanitize-gdbtk * i386-tdep.c (set_assembly_language_command): set tm_print_insn_info.mach to the appropriate value for 386 or 8086 disassembly. * printcmd.c (print_insn): Move init of disassembler_info to _initialize_printcmd. Set endian for disassembler here. * sparc-tdep.c: Set tm_print_insn_info.mach as appropriate to select sparc/sparclite. * config/sparc/{tm-sparc.h tm-sparclite.h}: Get rid of TM_PRINT_INSN. Set TM_PRINT_INSN_MACH to bfd_mach_sparc/bfd_mach_sparc_sparclite. Fri Jul 12 19:04:32 1996 Fred Fish * hpread.c (hpread_lookup_type): Use xmmalloc/xmrealloc rather than xmalloc/xrealloc. Fri Jul 12 17:59:47 1996 Fred Fish * objfiles.c (map_to_file): Error return from mmalloc_findbase is a NULL pointer, not a -1. Fri Jul 12 10:16:24 1996 Stu Grossman (grossman@critters.cygnus.com) * i386-tdep.c (set_assembly_language_command): New routine to select between i386 and i8086 instruction sets for disassembly. New command `set assembly-language {i386 i8086}'. Thu Jul 11 21:13:21 1996 Mark Alexander * monitor.c (monitor_write_memory, monitor_read_memory_single): Disable use of "long long" memory read/write commands; can't use them because we hold the values to read/write in an int variable, and because strtoul fails on values that exceed the size of a long. This fixes breakpoint problems on MON960. Thu Jul 11 11:39:31 1996 Fred Fish * config/m68k/xm-hp300hpux.h (HAVE_MMAP): Remove definition. * config/pa/xm-hppah.h (HAVE_MMAP): Ditto. Wed Jul 10 16:54:41 1996 Fred Fish * Makefile.in (MMALLOC_CFLAGS): Eliminate intermediate MMALLOC_DISABLE and MMALLOC_CHECK macros, and add comment indicating how host dependent makefile fragment should modify MMALLOC_CFLAGS to not use mmalloc, or to use it but to not do heap corruption checking. * gdbserver/Makefile.in: Ditto. * utils.c (init_malloc): Replace warning() use with direct call of fprintf_unfiltered, since current_target has not yet been set and thus we cannot use warning(). If we try to use mmcheck and it fails, suggest that this configuration needs NO_MMCHECK or MMCHECK_FORCE defined. Other small mmalloc related cleanups. * config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1. * config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Set to -DNO_MMCHECK. * config/sparc/xm-sun4os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): * config/i386/xm-i386v4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): * config/i386/xm-linux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): * config/m68k/xm-hp300hpux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): * config/m68k/xm-m68kv4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT); * config/m68k/xm-sun3os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): * config/pa/xm-hppah.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): * config/sparc/xm-sun4sol2.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): Remove obsolete defines. * config/alpha/alpha-linux.mh (MMALLOC_DISABLE): * config/alpha/alpha-osf1.mh (MMALLOC_DISABLE): * config/rs6000/rs6000.mh (MMALLOC_DISABLE): * config/rs6000/aix4.mh (MMALLOC_DISABLE): * config/powerpc/aix4.mh (MMALLOC_DISABLE): * config/powerpc/aix.mh (MMALLOC_DISABLE): * config/ns32k/ns32km3.mh (MMALLOC_DISABLE): * config/mips/mipsm3.mh (MMALLOC_DISABLE): * config/mips/decstation.mh (MMALLOC_DISABLE): * config/m88k/cxux.mh (MMALLOC_DISABLE): * config/i386/i386mk.mh (MMALLOC_DISABLE): * config/i386/i386m3.mh (MMALLOC_DISABLE): * config/i386/i386gnu.mh (MMALLOC_DISABLE): Use MMALLOC_CFLAGS instead. Tue Jul 9 22:41:12 1996 Jeffrey A Law (law@cygnus.com) * h8300-tdep.c: Remove some outdated comments. (h8300_skip_prologue): Rework to be more correct for the H8/300H. Handle stm.l insns for the H8/S. (examine_prologue): Likewise. Tue Jul 9 16:48:55 1996 Raymond Jou * ser-mac.c (mac_close): Change a typo SetSetBuf to SerSetBuf. Mon Jul 08 08:50:39 1996 Mark Alexander * mon960-rom.c (mon960_open): Add floating point detection to prevent hang on non-FPU processors (PR 9775). (mon960_cmds): Swap setmem.cmdw and setmem.cmdl to fix problem setting breakpoints and improve loading speed. Sun Jul 7 14:57:34 1996 Fred Fish * coffread.c (record_minimal_symbol): Don't presave name string on symbol_obstack before passing to prim_record_minimal_symbol. It now handles saving the string itself. * dbxread.c (read_dbx_dynamic_symtab): Ditto. * mipsread.c (read_alphacoff_dynamic_symtab): Ditto. * os9kread.c (record_minimal_symbol): Ditto. * solib.c (solib_add_common_symbols): Ditto. * coffread.c (coff_symtab_read): Don't presave name string on symbol_obstack before passing to prim_record_minimal_symbol_and_info. It now handles saving the string itself. * dbxread.c (record_minimal_symbol): Ditto. * elfread.c (record_minimal_symbol_and_info): Ditto. * dstread.c (record_minimal_symbol): Remove static function that just called prim_record_minimal_symbol with the same args (after change to prim_record_minimal_symbol to do it's own name string saves). * nlmread.c (record_minimal_symbol): Ditto. * somread.c (record_minimal_symbol): Ditto. * hpread.c (hpread_read_enum_type): Save symbol name on symbol obstack. (hpread_read_function_type): Ditto. (hpread_process_one_debug_symbol): Ditto. * mdebugread.c (parse_symbol): Ditto. (new_symbol): Ditto. * minsyms.c (prim_record_minimal_symbol_and_info): Ditto. * coffread.c (process_coff_symbol): Use obsavestring to save SYMBOL_NAME, rather than obstack_copy0. * dstread.c (create_new_symbol): Ditto * symfile.c (obconcat): Ditto. * stabsread.c (patch_block_stabs): Ditto. * xcoffread.c (SYMNAME_ALLOC): Ditto. * symfile.c (obsavestring): Update comments * solib.c (solib_add_common_symbols): Remove local var origname. Wed Jul 3 15:56:08 1996 Stu Grossman (grossman@critters.cygnus.com) * configure: Re-build with autoconf-2.10. * sparcl-tdep.c (_initialize_sparc_tdep) config/sparc/tm-sparc.h, config/sparc/tm-sparclite.h: Initialize tm_print_insn from TM_PRINT_INSN, which comes from the tm file. Tue Jul 02 21:41:20 1996 Mark Alexander * coffread.c, dbxread.c, elfread.c, mipsread.c, nlmread.c, os9kread.c: Replace identical sym_offsets functions with default_symfile_offsets. * somread.c (som_symfile_offsets): Use new SIZEOF_SECTION_OFFSETS macro to allocate section_offsets. * symfile.c (default_symfile_offsets): New function. * symfile.h: Declare default_symfile_offsets. * symtab.h: Define SIZEOF_SECTION_OFFSETS macro to simplify allocation of section_offsets. Tue Jun 11 12:02:55 1996 Stu Grossman (grossman@critters.cygnus.com) * Makefile.in (INTERNAL_LDFLAGS): Add in flags from configure. * configure configure.in: Only make sol-thread.o for native. Also, switch to dlopened libthread_db.so.1. * sol-thread.c: Switch to using dlopen to get the thread_db library. Thu Jun 13 16:53:25 1996 Stu Grossman (grossman@critters.cygnus.com) * configure, configure.in: Change test for libthread_db to only work for configs where build/host/target are the same. Tue Jul 2 15:04:20 1996 Michael Meissner * config/powerpc/{linux.mh,xm-linux.h}: New files, for Linux on PowerPC. * configure.in (powerpc-*-linux): Add Linux, System V, and ELF support. * configure: Regenerate. Mon Jul 1 13:00:43 1996 Stan Shebs From Raymond Jou : * mpw-make.sed: Add lines to whack out autoconf hook @CONFIG_LDFLAGS@. Mon Jul 01 11:07:15 1996 Mark Alexander * remote-e7000.c (e7000_stop): New function. Fri Jun 28 06:34:19 1996 Dawn Perchik * configure, configure.in: Add target sparclet. * monitor.h, monitor.c: Added monitor flags MO_NO_ECHO_ON_SETMEM (don't expect echo on setmem command), MO_RUN_FIRST_TIME (if command to start process running on target is different from one to continue execution), MO_HEX_PREFIX (if addresses from monitor have a "0x" prefix). * monitor.c, parse.c, sparc-tdep.c: Don't require strings in the registers array. This is to allow NULLs to be place holders in the tm-*.h file so that only minor changes are needed when a new processor is introduced (eg, one without floating point). * sparc-tdep.c: Conditionally remove dependancies on floating point. * sparclet-rom.c, config/sparc/sparclet.mt, config/sparc/tm-sparclet.h: New files for target sparclet. * symfile.c (load_command): Add option for 2nd parameter; a load offset added to the vma of each section. Fri Jun 28 05:39:19 1996 Dawn Perchik * main.c (main): Add option "l" for setting remote_timeout. Fri Jun 28 05:25:18 1996 Dawn Perchik * remote-e7000.c, remote.c, target.h, top.c: Add set option "remote_timeout" for setting remote_timeout. Add set option "use_hard_breakpoints" for setting hardware .vs. memory breakpoints. Fri Jun 28 04:32:18 1996 Dawn Perchik * remote-e7000.c (e7000_parse_device): New function. Add option "tcp_remote" to target command if using tcp to connect to a remote host which is then connected via serial port to the e7000 (for exampole, a port master). (e7000_open): Change to call e7000_parse_device. Fri Jun 28 03:47:17 1996 Dawn Perchik * monitor.c (monitor_debug): Fix remotedebug buffering. Thu Jun 27 18:24:17 1996 Stan Shebs * config/i386/cygwin32.mh, config/powerpc/cygwin32.mh (NATDEPFILES): Add a space. Wed Jun 26 06:05:39 1996 Wilfried Moser (Alcatel) * gdbtypes.c (create_array_type): If TYPE_LENGTH (result_type) is zero, set TYPE_FLAG_TARGET_STUB to force reevaluation of the type. * ch-exp.c (calculate_array_length): Function removed. Tue Jun 25 17:41:06 1996 Martin M. Hunt * remote-e7000.c (e7000_read_inferior_memory_large): New function. (e7000_xfer_inferior_memory): Call it. Tue Jun 25 23:14:07 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) * gdb/gdbserver/Makefile.in (docdir): Removed. Tue Jun 25 22:05:38 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir): Use autoconf set values. (docdir): Removed. * configure.in (AC_PREREQ): autoconf 2.5 or higher. * nlm/Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir): Use autoconf set values. (docdir): Removed. * nlm/configure.in (AC_PREREQ): autoconf 2.5 or higher. * nlm/configure: Rebuilt. * gdb/gdbserver/Makefile.in (datadir): Set to $(prefix)/share. Mon Jun 24 09:56:14 1996 Angela Marie Thomas (angela@cygnus.com) * stabsread.c (read_cfront_member_functions): add type Sun Jun 23 23:40:48 1996 Doug Evans * win32-nat.c: #include . (unix_paths_to_dos_paths, dos_paths_to_unix_paths): Delete. (child_create_inferior): Convert only env var PATH to win32 style. (set_pathstyle_dos): Delete. (_initialize_inftarg): Delete dos-path-style command. start-sanitize-gdbtk Fri Jun 21 11:04:47 1996 Fred Fish * gdbtk.tcl (create_register_windows): Include missing '$'s. Add global declarations for various reg_format_* variables. * gdbtk.tcl (populate_register_window): Make initial window one line taller to account for new column header line. Fri Jun 21 09:46:47 1996 Fred Fish * gdbtk.c (get_register): Support for printing raw formats. * gdbtk.tcl: Add hint for using debug_interface. (center_window, add_breakpoint_frame, delete_breakpoint_frame): Enclose arg in braces for consistency. (create_registers_window, populate_reg_window, update_registers): Major rewrite to support displaying multiple formats in the register window. (init_reg_info): New function. (recompute_reg_display_list): Reset reg_display_list, start register display lines at line 2. end-sanitize-gdbtk Thu Jun 20 13:42:23 1996 Doug Evans * configure.in: Revise sol-thread.o test. * configure: Regenerated. * source.c (find_source_lines): Reassign size to result of read. start-sanitize-gdbtk Thu Jun 20 08:18:59 1996 Fred Fish * gdbtk.tcl (gdbtk_tcl_readline_begin): Handle backspace to avoid backing up over prompt. At every input, make sure insert point is at least after command start, handle control-u to delete current input line. (tclsh): Handle backspace to avoid backing up over prompt. Handle control-u to delete current input line. Wed Jun 19 17:23:38 1996 Geoffrey Noer * configure.in: disable gdbtk for *cygwin32* hosted compiles * configure: regenerated with autoconf 2.8 end-sanitize-gdbtk Tue Jun 18 16:25:54 1996 Jeffrey A. Law * h8300-dep.c (gdb_print_insn_h8300): Handle the H8/S. (h8300_command): Likewise. (set_machine): Likewise. (set_machine_hook): Likewise. (_initialize_h8300m): Likewise. * config/h8300/tm-h8300.h (h8300smode): Declare. Sun Jun 16 15:21:51 1996 Jeffrey A. Law * somsolib.c (som_solib_create_inferior_hook): Handle tracking of shl_load calls for hpux10. Thu Jun 13 11:16:10 1996 Tom Tromey * config.in: Regenerated. * acconfig.h (HAVE_THREAD_DB_LIB): Added entry. * configure: Regenerated. * aclocal.m4 (CY_AC_PATH_TCLH, CY_AC_PATH_TKH): Use odd names to avoid name clashes with SunOS headers. Tue Jun 11 19:52:50 1996 Fred Fish From Michael Snyder : * bcache.c (print_bcache_statistics): Avoid divide-by-zero exception if one or more objfile has no symbols, such as when a dynamic library has been stripped. Tue Jun 11 12:02:55 1996 Stu Grossman (grossman@critters.cygnus.com) * Makefile.in (INTERNAL_LDFLAGS): Add in flags from configure. * configure configure.in: Only make sol-thread.o for native. Also, switch to dlopened libthread_db.so.1. * sol-thread.c: Switch to using dlopen to get the thread_db library. Mon Jun 10 14:17:19 1996 Fred Fish * config/sparc/{xm-sun4sol2.h,xm-sun4os4.h} (MMAP_BASE_ADDRESS): Change from 0xE0000000 to 0xC0000000. Thu Jun 6 17:10:32 1996 Michael Meissner * config/powerpc/xm-solaris.h: Initial version of support for Solaris on PowerPC. Wed Jun 5 01:52:57 1996 James G. Smith * configure.in (configdirs): Force 4100 builds to use 4300 GDB target. * configure: Rebuild. * config/mips/vr4300el.mt (SIM_OBS): Include simulator in little-endian builds. Mon Jun 3 11:48:29 1996 Jeffrey A Law (law@cygnus.com) * inftarg.c (child_thread_alive): Protect declaration with #ifndef CHILD_THREAD_ALIVE. * source.c (find_source_lines): Check the time on the symtab's bfd if it exists, else check the time on the exec_bfd. Thu May 30 09:43:17 1996 Mark Alexander * dsrec.c (make_srec): Fix calculation of address size to allow addresses less than 0x100. Thu May 30 04:24:09 1996 Wilfried Moser (Alcatel) * ch-exp.c (ch_lex): In case of LOC_TYPEDEF call calculate_array_length. Tue May 28 16:15:47 1996 Geoffrey Noer * remote-mips.c: cannot use EINVAL for breakpoint test since its value varies for different hosts (e.g. go32's is 19, while sunos is 22). Changed to hardcoded 22 since that is what the mips boards return. Tue May 28 11:14:58 1996 Tom Tromey * configure: Regenerated. * aclocal.m4 (CY_AC_PATH_TCLH): Don't use AC_TRY_RUN. (CY_AC_PATH_TKH): Don't use AC_TRY_RUN. Sun May 26 16:56:35 1996 Miles Bader * solib.c (solib_absolute_prefix, solib_search_path): New variables. (_initialize_solib): Add set/show commands for those variables. (solib_map_sections): Implement searching using them. Sun May 26 14:14:49 1996 Fred Fish Changes from: David Mosberger-Tang * NEWS: Add Alpha Linux as a new native configuration. * mdebugread.c (parse_symbol): When we find a malloc() symbol with return type VOID, assume no debugging info is available for that object file and patch the return value into VOID *. Otherwise, operations requiring an implicit call to malloc() will fail. * infrun.c (wait_for_inferior): The criterion to detect entering a sigtramp handler is now: (a) the current pc is inside a sigtramp handler, (b) the previous pc is not in a sigtramp handler, and (c) the current stack pointer is "inner" than the old one. Condition (c) is new to avoid mistaking a return from a signal handler into sigtramp as a new sigtramp invocation. * dcache.c (struct dcache_block): Declare addr as CORE_ADDR. An int may not be big enough to hold an address. (dcache_hit): Ditto. (dcache_peek_byte): Fix indentation. * configure.in (alpha-*-linux*): Add target. * configure: Rebuild * config/alpha/tm-alpha.h (PROC_DESC_IS_DYN_SIGTRAMP): New macro. (SET_PROC_DESC_IS_DYN_SIGTRAMP): Ditto. (DYNAMIC_SIGTRAMP_OFFSET): Ditto. (SIGCONTEXT_ADDR): Ditto. (FRAME_PAST_SIGTRAMP_FRAME): Ditto. * config/alpha/alpha-linux.mh: New file. * config/alpha/alpha-linux.mt: Ditto. * config/alpha/nm-linux.h: Ditto. * config/alpha/tm-alphalinux.h: Ditto. * config/alpha/xm-alphalinux.h: Ditto. * config/alpha/xm-alphaosf.h: Renamed from xm-alpha.h. * config/alpha/alpha-osf1.mh (XM_FILE): Change from xm-alpha.h to xm-alphaosf.h. * config/alpha/alpha-osf2.mh: Ditto. * blockframe.c (find_pc_partial_function): Pass PC to SIGTRAMP_START and SIGTRAMP_END macros for the benefit of systems that detect sigtramp code via designated code sequences (as is the case for Linux/Alpha, for example). * config/i386/tm-i386bsd.h: Change SIGTRAMP_START and SIGTRAMP_END to ignore new PC argument. * config/m68k/tm-hp300bsd.h: Ditto. * config/vax/tm-vax.h: Ditto. * alpha-tdep.c (alpha_linux_sigtramp_offset): New function. (alpha_osf_skip_sigtramp_frame): Ditto. (push_sigtramp_desc): Ditto. (alpha_find_saved_regs): Use SIGCONTEXT_ADDR macro to extract sigcontext address from frame. (alpha_saved_pc_after_call): When in sigtramp, use alpha_frame_saved_pc() instead of read-register(). (after_prologue): When inside a dynamically generated sigtramp function, there is no prologue, so return address of first instruction. (alpha_in_prologue): Fix typo in comment. (find_proc_desc): Use macro DYNAMIC_SIGTRAMP_OFFSET to determine whether we're inside a dynamicaly generated sigtramp function. If so, create and push and appropriate procedure descriptor. (alpha_frame_chain): Use macro FRAME_PAST_SIGTRAMP_FRAME to obtain the frame past a sigtramp frame (if the current frame is indeed a sigtramp function). (init_extra_frame_info): Don't read next frame register off of stack-pointer when inside a dynamiccaly generated sigtramp. (alpha_pop_frame): Also unlink and destroy procedure descriptors created for dynamically generated sigtramp functions. * alpha-nat.c: When compiling under Linux, include and instead of Tue Jul 2 13:58:10 1996 Miles Bader * gnu-nat.c (inf_validate_task_sc): Give terminal to gdb while asking question. (inf_resume): Don't validate the task suspend-count while execing. Thu Jun 13 11:04:52 1996 Miles Bader * gnu-nat.c (inf_validate_task_sc): Query user before clearing any additional suspend count. (S_proc_wait_reply, gnu_attach): Don't call inf_validate_task_sc. (inf_resume): Call inf_validate_task_sc here. (gnu_resume): Call inf_update_procs to ensure noticing new threads. Fri Jun 7 17:00:43 1996 Miles Bader * gnu-nat.c (gnu_create_inferior: attach_to_child): Return PID. Thu May 23 15:13:56 1996 Jeffrey A Law (law@cygnus.com) * h8300-tdep.c (IS_PUSH): Refine. (IS_MOVE_FP, IS_MOV_SP_FP): Accept H8/300H varaints. (IS_SUB4_SP, IS_SUBL_SP): New macros. (h8300_skip_prologue): Handle H8/300H prologue code sequences. (examine_prologue): Handle addresses from 0x010000 to 0xffffff when in H8/300H mode. Get the return pointer's address correctly for the H8/300H. Handle H8/300H prolouge code sequences. * symfile.c (generic_load): Print the starting address of the file just loaded. Thu May 23 12:09:52 1996 Stan Shebs * mpw-make.sed: Edit @THREAD_DB_OBS@ out of makefile. Tue May 21 11:53:56 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * breakpoint.c (bpstat_do_actions): Avoid endless recursion if a `source' command is contained in bs->commands. * infrun.c (wait_for_inferior): Update step_frame_address when stepping into a new line. From schwab@issan.informatik.uni-dortmund.de (Andreas Schwab): * breakpoint.c (breakpoint_1): Add shlib_disabled case to bpenables array. Mon May 20 22:52:00 1996 Mark Alexander * dsrec.c (load_srec): Add WAITACK parameter, for machines like EST visionICE that send back an ACK after each S-record. * monitor.c (monitor_wait_srec_ack): New function. (monitor_load): Pass monitor_wait_srec_ack to load_srec if the monitor's MO_SREC_ACK flag is set. * monitor.h: Define MO_SREC_ACK flag. * remote-est.c (est_cmds): Add MO_SREC_ACK flag. * sh3-rom.c (sh3_load): Accomodate change in load_srec prototype. * srec.h: Add WAITACK parameter to load_srec prototype. Sun May 19 21:22:00 1996 Rob Savoye * config/sparc/sparclite.mt: Add the sparc simulator. Sun May 19 16:49:37 1996 Fred Fish * defs.h (read_command_lines, query_hook): Update prototypes. (readline_begin_hook, readline_hook, readline_end_hook): Declare. * breakpoint.c (commands_command): Build message in temporary buffer and pass that, as well as tty control flag, to read_command_lines. * top.c (readline_begin_hook, readline_hook, readline_end_hook): Define here. (command_loop): Check for non-NULL instream before looping. (command_line_input): Use readline_hook when appropriate, to get user input from a GUI window. (read_next_line): Also build prompt if getting user input from a GUI. (recurse_read_control_structure): Fix typo in comment. (read_command_lines): Use passed in prompt and tty flag to decide how to build message. Use readline_begin_hook when appropriate, to set up a GUI interaction window. Just return head, whether NULL or not, after using readline_end_hook to complete GUI interaction. (define_command, document_command): Build message in a temporary buffer and pass it to read_command_lines, along with tty flag. start-sanitize-gdbtk * gdbtk.c (gdbtk_readline_begin, gdbtk_readline, gdbtk_readline_end): New functions. (tk_command_loop): Set instream to NULL to enable Tk user interaction. (gdbtk_init): Set readline_begin_hook, readline_hook, and readline_end_hook. * gdbtk.tcl (gdbtk_tcl_readline_begin, gdbtk_tcl_readline, gdbtk_tcl_readline_end): New functions. (tclsh): Pack scroll bar on right side of window, not left. end-sanitize-gdbtk Sat May 18 02:43:58 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * blockframe.c (frameless_look_for_prologue): Add FUNCTION_START_OFFSET only if func_start is non-zero. * minsyms.c (lookup_minimal_symbol_by_pc): Return NULL if pc is not in a known section. * stack.c (print_frame_info): Remove check for fi->pc in known section, now handled by lookup_minimal_symbol_by_pc. start-sanitize-gdbtk Fri May 17 13:54:34 1996 Fred Fish * gdbtk.tcl (create_command_window): Change a misspelled "get" to the intended "cget". (delete_line): Fix so it deletes the current line at the insertion cursor. end-sanitize-gdbtk Fri May 17 13:31:04 1996 Stan Shebs * sh-stub.c: New file, was config/sh/stub.c. start-sanitize-gdbtk Thu May 16 19:20:29 1996 Fred Fish * gdbtk.tcl (gdb_prompt): Set this early on. (create_command_window): Use gdb_prompt rather than "(gdb) ". (gdbtk_tcl_preloop): Proc executed just prior to Tk main loop. (tclsh): If an evaluation window already exists, just bring it to the front instead of trying to create another. * gdbtk.c (tk_command_loop): New function. (gdbtk_init): Call tk_command_loop rather than Tk_MainLoop. Thu May 16 16:16:35 1996 Fred Fish * gdbtk.tcl (evaluate_tcl_command, tclsh): New functions that implement a tcl evaluation window for gdbtk maintainers to use. Thu May 16 11:42:58 1996 Tom Tromey * gdbtk.tcl (files_command): Correctly insert list of files into listbox widget. * gdbtk.tcl (files_command): listbox command no longer accepts -geometry. Wed May 15 16:04:09 1996 Stan Shebs * gdbtk.tcl (create_command_window): If command window's buffer is disabled, don't execute any of the key bindings. end-sanitize-gdbtk Wed May 15 08:25:12 1996 Jeffrey A Law (law@cygnus.com) * top.c (read_next_line): Fix thinkos. From Donn Seeley. * coffread.c (coff_symtab_read): Handle C_LABEL symbols like C_STAT symbols. * h8300-tdep.c (h8300_pop_frame): Reset $sp and $pc correctly. Flush cached frames just before exiting. * remote-sim.c (gdbsim_resume): Complain if the program isn't being run. * config/h8300/tm-h8300.h (BELIEVE_PCC_PROMOTION): Define. Tue May 14 18:05:16 1996 Stu Grossman (grossman@critters.cygnus.com) * procfs.c (procfs_thread_alive procfs_stop): Make static. (procfs_pid_to_str): New routine to print out thread id's in an intelligible manner. * sol-thread.c (sol_thread_fetch_registers): Re-order manner in which supply_register is called to fix bug with writing individual regs. * config/sparc/tm-sun4sol2.h: Define default for target_pid_to_str in case host lacks libthread_db. Mon May 13 23:53:30 1996 Stu Grossman (grossman@critters.cygnus.com) * Makefile.in config.in configure configure.in config/sparc/nm-sun4sol2.h config/sparc/sun4sol2.mh config/sparc/tm-sun4sol2.h: Use autoconf to config Solaris thread and pthread support, since pre-2.5 systems don't come with libthread_db.so.1. * procfs.c (info_proc): Use int instead of id_t. Old versions of Irix don't seem to define this. start-sanitize-gdbtk Mon May 13 13:43:25 1996 Fred Fish * gdbtk.c (tk_command): Catch case where no argument is given since this will cause the tcl interpreter to dump core. end-sanitize-gdbtk Mon May 13 17:40:58 1996 Jeffrey A Law (law@cygnus.com) * top.c (execute_control_command, case while_control): Allow a while command to be interrupted. Mon May 13 16:17:36 1996 Stu Grossman (grossman@critters.cygnus.com) * sol-thread.c: More cleanup, add comments. (sol_thread_resume): Prevent people from trying to step inactive threads. (sol_thread_wait sol_thread_fetch_registers sol_thread_store_registers): Remove unnecessary check for sol_thread_active. These routines won't get called unless threads are active. Mon May 13 11:29:37 1996 Stan Shebs SH3-E support from Allan Tajii : * sh-tdep.c (sh_reg_names, sh3_reg_names): Add empty names for float registers. (sh3e_reg_names): New register name array. (sh_processor_type_table): Add sh3e processor type. * config/sh/tm-sh.h (REGISTER_VIRTUAL_TYPE): Fix test. (REGISTER_NAMES, NUM_REGS, NUM_REALREGS, etc): Adjust for full set of registers. * remote-e7000.c (want_sh3, want_sh3_nopc): New globals. (e7000_fetch_registers, e7000_wait): Use them. * sh3-rom.c (sh3_regnames): Add float registers. (sh3e_cmds, sh3e_ops): New globals. (sh3e_open): New function. (_initialize_sh3_rom): Rename from _initialize_sh3, set up sh3e target vector. Fri May 10 15:53:38 1996 Stu Grossman (grossman@lisa.cygnus.com) * sol-thread.c: Cleanup. gcc -Wall fixes. Add prototypes. Print out messages instead of codes for thread_db errors. Make access macros for thread and lwp manipulation. Make cleanups to fixup inferior_pid in case of errors. Thu May 9 19:06:02 1996 Fred Fish * aclocal.m4: Remove unused definition of AC_C_CROSS. * configure.in: Add powerpcle-*-solaris* host and target config so April 30th change does not get lost next time configure is rebuilt. Thu May 9 14:13:08 1996 Stu Grossman (grossman@critters.cygnus.com) * Makefile.in, breakpoint.c, corelow.c, fork-child.c, inflow.c, infrun.c, mac-nat.c, procfs.c, remote.c, sol-thread.c, thread.c, win32-nat.c, config/nm-lynx.h: Rename thread.h to gdbthread.h to avoid conflict with Solaris /usr/include/thread.h. Thu May 9 12:33:32 1996 Rob Savoye * abug-rom.c: Config file for the older style ABug monitor that runs on the mvme13x boards. * config/m68k/monitor.mt: Add abug support for m68k cross debugging. Wed May 8 20:33:24 1996 Fred Fish * infcmd.c (do_registers_info): Always print the raw floating point value's bytes in big endian order, so the the leftmost bit is the most significant. * breakpoint.c (clear_momentary_breakpoints): Remove dead code that is referenced nowhere else. (set_breakpoint): Ditto. (do_enable_breakpoint): Created from enable_once_breakpoint with a couple of changes. (enable_breakpoint): Call do_enable_breakpoint with an appropriate bpdisp enum value to set disposition of breakpoint. (enable_once_breakpoint): Ditto. (enable_delete_breakpoint): Ditto. * breakpoint.h (clear_momentary_breakpoints): Remove prototype. * symtab.c (find_pc_line): Improve comments. start-sanitize-gdbtk * gdbtk.c: Fix a couple of misspellings. end-sanitize-gdbtk * xcoffread.c: Ditto. Tue May 7 18:37:06 1996 Stan Shebs * target.c (debug_to_xfer_memory): Insert line breaks when dumping the memory block. Mon May 6 13:52:52 1996 Stu Grossman (grossman@critters.cygnus.com) * fork-child.c (fork_inferior), inferior.h: init_trace_fun now returns a possibly modified pid. * inftarg.c (ptrace_him): Now returns pid; * m3-nat.c (m3_trace_him): Now returns pid; * infcmd.c (run_command): Minor cleanup. * infrun.c (wait_for_inferior): Add another check for one_stepped near where we read the pc to avoid erroneously setting random_signal for multi-threaded support. * procfs.c: Add support for Solaris LWPs. Remove def of LOSING_POLL. Many cleanups... Several workarounds for Solaris lossage. System call entry and exit are now handled by dynamically registered handlers. * (syscallname): Don't barf when handed an unknown syscall number. * (info_proc_syscalls): Ditto. * sol-thread.c: New file. Implements Solaris thread support. * symfile.c (symbol_file_add): Add call to target_new_objfile to notify target-dependent code about new symbol tables. * (clear_symtab_users): Call target_new_objfile to notify it of the removal of all symbol tables. * target.c (push_target): Make sure that to_close is non-zero before calling it. * target.h (target_new_objfile): Provide default. * config/alpha/nm-osf2.h: Define LOSING_POLL because this version of OSF can't hack using poll with /proc. * config/sparc/nm-sun4sol2.h (target_new_objfile): Define to be sol-thread-new-objfile. * config/sparc/sun4sol2.mh: Add sol-thread.o to NATDEFFILES, and add libthread_db.so.1 to NAT_CLIBS. * config/sparc/tm-sun4sol2.h: Define PIDGET, TIDGET, and target_pid_to_str. Sat May 4 02:13:34 1996 N Srin Kumar * procfs.c (remove_fd): Fix copy of fds to fill hole left after removal of the requested fd. Mon May 6 07:52:48 1996 Michael Meissner * rs6000-tdep.c (_initialize_rs6000_tdep): Don't do XCOFF specific hooks under ELF. * config/powerpc/tm-ppc-eabi.h: Define ELF_OBJECT_FORMAT. start-sanitize-gdbtk Thu May 2 19:17:49 1996 Stan Shebs * gdbtk.tcl (debug_interface): New global, use to aid debugging. (insert_breakpoint_tag, delete_breakpoint_tag): Fix range. (file_popup_menu): Delete, never used. (listing_window_popup): Rename from listing_window_button_1, remove breakpoint toggling code. (toggle_breakpoint): New procedure. (create_file_win): Bind popup menu to button 2, toggle breakpoints with button 1 in breakpoint area, add display of tagged areas if debugging on. end-sanitize-gdbtk Thu May 2 12:46:14 1996 Jeffrey A Law (law@cygnus.com) From Peter Schauer: * breakpoint.h (enum bpdisp): Add del_at_next_stop. * breakpoint.c (insert_breakpoints, watchpoint_check, bpstat_stop_status): Avoid bad references to memory freed via delete_breakpoint on watchpoints going out of scope. Do not delete these watchpoints, disable them and change their disposition to del_at_next_stop instead. (breakpoint_auto_delete): Delete all breakpoints whose disposition is del_at_next_stop. (breakpoint_init_inferior): Use switch to avoid reference to already deleted breakpoint. Wed May 1 17:29:18 1996 Fred Fish * Makefile.in (rs6000-nat.o): Depend on xcoffsolib.h. * config/rs6000/rs6000.mh (NATDEPFILES): Move xcoffread.o ... * config/rs6000/rs6000.mt (TDEPFILES): ... to here. * xcoffsolib.c (xcoff_relocate_symtab_hook): Define and initialize. (solib_info): Call xcoff_relocate_symtab via the hook. (sharedlibrary_command): Ditto. * xcoffread.c: Remove all FAKING_RS6000 comments and defines. (xcoff_add_toc_to_loadinfo_hook): Define and initialize here. (xcoff_init_loadinfo_hook): Define and initialize here. (scan_xcoff_symtab): Call xcoff_add_toc_to_loadinfo via the hook. (xcoff_initial_scan): Call xcoff_init_loadinfo via the hook. * xcoffsolib.h (xcoff_relocate_symtab_hook): Declare extern func. * rs6000-tdep.c (_initialize_rs6000_tdep): Add initializations of xcoff_add_toc_to_loadinfo_hook and xcoff_init_loadinfo_hook. * rs6000-nat.c (_initialize_core_rs6000): Add initialization of xcoff_relocate_symtab_hook. Tue Apr 30 13:22:02 1996 Michael Meissner * configure (powerpcle-*-solaris*): Add Solaris support. * config/powerpc/{solaris.m[ht],tm-solaris.h}: New files for Solaris support. Mon Apr 29 16:17:31 1996 Dawn Perchik * c-valprint.c (c_val_print): Fix printing for arrays defined with 0 length. Sun Apr 28 15:08:05 1996 Stan Shebs Support for bi-endian remote breakpoints. * remote.c (big_break_insn, little_break_insn): New globals. (break_insn): Remove. (remote_insert_breakpoint, remote_remove_breakpoint): Use own code if REMOTE_BREAKPOINT defined, otherwise call memory breakpoint functions. * config/sh/tm-sh.h (REMOTE_BREAKPOINT): Remove. (BIG_REMOTE_BREAKPOINT, LITTLE_REMOTE_BREAKPOINT): Define. * mon960-rom.c (mon960_cmds): Remove forward decl. (mon960_load): Use current_monitor instead of mon960_cmds. (mon960_regnames): Remove backslashes from line ends. (_initialize_mon960): Fix documentation string. Sun Apr 28 12:10:35 1996 Fred Fish * symfile.h (psymbol_allocation_list): Expand comments which describe the psymbol allocation list and how each field is used. Sun Apr 28 03:44:30 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * breakpoint.c (delete_breakpoint): Fix bpt->val, bpt->exp storage leaks. (breakpoint_re_set_one): Fix b->exp, b->val, b->cond storage leaks. * infcmd.c (run_command), solib.c (locate_base): Check for target_has_execution in addition to inferior_pid, a core file from a threaded program is yielding a non-zero inferior_pid. * sparc-tdep.c (get_saved_register): Handle window registers in a dummy frame correctly. Sat Apr 27 20:38:32 1996 Fred Fish * Makefile.in (CLIBS): Move $(MMALLOC) past all other libs, so that anything that wants an allocation function not yet pulled in, will get it from mmalloc rather than a system library. * Makefile.in (INSTALLED_LIBS): Reorder to match order of CLIBS, to avoid surprising results when used. Sat Apr 27 00:12:05 1996 Dawn Perchik (dawn@cygnus.com) * stabsread.c: Changes and bug fixes for cfront support. Fix bug for class data members. Fix parsing bug when no base classes exist. Fix memory bug - allocate space for cplusplus specific info. Add support for static data. Add prototypes for static functions. Enhance comments to show what each function expects to parse. Cleanup code. * stabsread.c(resolve_cont),dbxread.c(resolve_cont): Rename function to resolve_cfront_continuation. Fri Apr 26 23:58:26 1996 Jeffrey A Law (law@cygnus.com) * infrun.c (wait_for_inferior): Call registers_changed when restarting the inferior to get over a nullified instruction. Tue Apr 24 12:12:55 1996 Dawn Perchik (dawn@cygnus.com) * dbxread.c,stabsread.c,gdbtypes.c,partial-stab.h,valops.c: Add new support for parsing cfront stabs. Wed Apr 24 00:32:55 1996 Jeffrey A Law (law@cygnus.com) * infrun.c (wait_for_inferior): Move "have_waited" label outside of #ifdef conditionals. Don't trash the wait status if we get a signal and the current instruction is nullified. Mon Apr 22 20:17:01 1996 Fred Fish * Makefile.in (VERSION): Bump version number to 4.16.1. * NEWS: Update for 4.16 release. Mon Apr 22 16:32:29 1996 Stan Shebs * monitor.h: Clean up comment formatting. (current_monitor): Remove decl. (LOADTYPES, LOADPROTOS, INIT_CMD, etc): Remove definitions. (push_monitor, SREC_SIZE): Remove. * monitor.c: Expand old macro into current_monitor derefs everywhere. * remote-os9k.c (current_monitor): Remove definition. Mon Apr 22 14:54:45 1996 Mark Alexander * corefile.c (specify_exec_file_hook): Allow arbitrary number of hooks. (call_extra_exec_file_hooks): New function. * h8300-tdep.c: Lint; add .h files to provide missing declarations, remove unused variables. (set_machine_hook): New function. (_initialize_h8300m): Initialize it. Fri Apr 19 15:03:49 1996 Ian Lance Taylor * remote-mips.c (encoding): Don't specify size, to avoid bug in SunOS native compiler. Thu Apr 18 18:46:57 1996 Stan Shebs * monitor.c: Use int rather than LONGEST for values, since the formatting strings are not prepared to accept long longs. Wed Apr 17 20:17:27 1996 Doug Evans * arm-tdep.c (initialize_arm_tdep): Make apcs32 a `zinteger'. Tue Apr 16 17:38:23 1996 Stu Grossman (grossman@critters.cygnus.com) * corelow.c (add_to_thread_list): Make sure reg_sect is non-null before de-referencing it. Prevents deref of NULL pointer if core file lacks .reg section. * defs.h: Rename floatformat_{to from}_long_double to floatformat_{to from}_doublest. Get rid of FLOATFORMAT_{TO FROM}... macros. * findvar.c (extract_floating store_floating): Change all refs to FLOATFORMAT_{FROM TO}... to floatformat_{from to}_doublest. * utils.c: Change floatformat_{to from}_long_double to floatformat_{to from}_doublest cuz the new routines will use whatever size (double or long double) is appropriate. * config/i960/tm-i960.h (REGISTER_CONVERT_TO_VIRTUAL REGISTER_CONVERT_TO_RAW): Change FLOATFORMAT... macros to floatformat... routine calls. Mon Apr 15 16:34:11 1996 Per Bothner * stabsread.c (read_type): Move handling of '@' from type number handling to handling of types proper (as emitted by gcc!). For typedefs, allocate the typedef type before reading its definition, to properly handling recursive types. Mon Apr 15 11:19:26 1996 Jeffrey A Law (law@cygnus.com) * ch-exp.c (calculate_array_length): Fix prototype. Sat Apr 13 14:21:16 1996 Stu Grossman (grossman@critters.cygnus.com) * remote-nindy.c (nindy_open): Acquire more target state so that user can attach to a previously running program. * (nindy_fetch_registers nindy_store_registers): Get rid of fp conversion code. That's all handled in {extract store}_floating now. * utils.c (floatformat_to_double): Don't bias exponent when handling zero's, denorms or NaNs. * config/i960/tm-i960.h (REGISTER_CONVERT_TO_VIRTUAL REGISTER_CONVERT_TO_RAW): Change to using DOUBLST and FLOATFORMAT_TO/FROM_DOUBLEST macros. * config/i960/tm-nindy960.h: Undefine REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW, and REGISTER_CONVERTIBLE. These are no longer necessary now that all the magic happens in extract/store_floating. Sat Apr 13 02:58:02 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * eval.c (evaluate_subexp_standard): Report error when attempting to evaluate subscripts for types which cannot be subscripted. * valarith.c (value_x_binop, value_x_unop): Add noside parameter. Return a zero value with the return type of the member function if noside is EVAL_AVOID_SIDE_EFFECTS instead of calling the member function. * values.h (value_x_binop, value_x_unop): Update prototypes accordingly. * eval.c (evaluate_subexp_standard): Update all callers of value_x_binop, value_x_unop accordingly. * valarith.c (value_neg, value_complement): Perform ANSI C/C++ integral promotion on operands. Fri Apr 12 13:19:27 1996 Fred Fish * README: Update for 4.16 release. * configure.in (AC_CHECK_FUNCS): Also check for sbrk. * configure: Regenerate with autoconf. * config.in: Regenerate with autoheader. * main.c (main): Only use sbrk() when HAVE_SBRK is defined. * top.c (command_loop): Ditto. Fri Apr 12 09:45:29 1996 Stu Grossman (grossman@critters.cygnus.com) * defs.h: Define TARGET_{FLOAT DOUBLE LONG_DOUBLE}_FORMAT defaults for bi-endian targets. Replace function pointers for floatformat routines with macros. No need for these to be runtime selectable. * findvar.c: Get rid of floatformat function pointers. Use macros in extract_floating and store_floating. * remote-nindy.c (nindy_fetch_registers nindy_store_registers): Use floatformat macros. Thu Apr 11 21:28:02 1996 Fred Fish From: Miles Bader * configure.in (AC_CHECK_HEADERS): check for endian.h. Use AC_CHECK_TOOL to find AR & RANLIB. Add AC_PROG_AWK. Add host & target cases for i[345]86-*-gnu*. * config.in: Regenerate with autoheader. * configure: Regenerate with autoconf. * Makefile.in (AR, AWK): Set from corresponding autoconf substs. (init.c): Don't scan mig-generated files. * defs.h (endian.h): Include if HAVE_ENDIAN_H defined. * config/nm-m3.h (ATTACH_NO_WAIT): Define. * infcmd.c (attach_command): Use "#ifndef ATTACH_NO_WAIT" rather than "#ifndef MACH". Thu Apr 11 18:49:42 1996 Stan Shebs * remote.c (remotewritesize): New GDB variable, controls size of memory packets sent to the target. Thu Apr 11 13:47:52 1996 Stu Grossman (grossman@critters.cygnus.com) * dcache.c: Add prototypes. Make many functions static. * (dcache_peek dcache_fetch dcache_poke): Make dcache_fetch and dcache_poke call dcache_xfer_memory directly in order to fix problems with turning off dcache. dcache_peek is now unnecessary, so it goes away. * defs.h: Define new macros HOST_{FLOAT DOUBLE LONG_DOUBLE}_FORMAT and TARGET_{FLOAT DOUBLE LONG_DOUBLE}_FORMAT to specify a pointer to a struct floatformat. This allows for better handling of targets whose floating point formats differ from the host by more than just byte order. * (floatformat_to_long_double floatformat_from_long_double): Prototypes for new functions in utils.c. * (floatformat_to_doublest floatformat_from_doublest): Prototypes for pointers to floating point conversion functions. The actual function uses either double or long double if the host supports it. * findvar.c (floatformat_to_doublest floatformat_from_doublest): Initialize to point at correct function depending on HAVE_LONG_DOUBLE. * (extract_floating store_floating): Rewrite. Now, if host fp format is the same as the target, we just do a copy. Otherwise, we call floatformat_{to from}_doublest. * remote-nindy.c (nindy_xfer_inferior_memory): Change param `write' to `should_write'. * utils.c (floatformat_to_long_double floatformat_from_long_double): New routines that implement long double versions of functions in libiberty/floatformat.c. * config/i960/tm-i960.h (TARGET_LONG_DOUBLE_FORMAT): Define this for i960 extended real (80 bit) numbers. * nindy-share/nindy.c (ninMemGet ninMemPut): Return number of bytes actually read or written. Wed Apr 10 02:56:06 1996 Wilfried Moser (Alcatel) * ch-valprint.c (chill_val_print): Remove call to calculate_array_length. (calculate_array_length): Move function from here ... * ch-exp.c (calculate_array_length): ... to here. (parse_primval): If we have a symbol with an array type and the length is 0, call calculate_array_length. Tue Apr 9 01:23:05 1996 Wilfried Moser (Alcatel) * eval.c (evaluate_subexp_standard): In case of TYPE_CODE_SET: Add some checks for powerset compatibility. * valops.c (value_slice): Use lowbound instead of lowerbound for call to slice_range_type to get correct bounds. Mon Apr 8 12:53:56 1996 Fred Fish * Makefile.in (scm-exp.o, scm-lang.o, scm-valprint.o): Add targets and dependencies. * scm-lang.c (gdb_string.h): Include. * objfiles.c (add_to_objfile_sections): Cast second arg of obstack_grow call to correct type (char *). * cp-valprint.c (cp_print_static_field): Ditto. * somsolib.c (som_solib_create_inferior_hook): Add a declaration for external find_unwind_entry function (from hppa-tdep.c). * remote-pa.c (remote_write_bytes, remote_read_bytes): Change type of second arg to "char *" to be type compatible with dcache. (remote_wait): Cast second arg to strtol to correct type. * hppa-tdep.c (compare_unwind_entries): Change argument types to "const void *" to be type compatible with qsort, and then assign to local args prior to use. Mon Apr 8 15:35:52 1996 Jeffrey A Law (law@cygnus.com) * infptrace.c (kill_inferior): Remove call to "kill"; update comments. Mon Apr 8 14:05:07 1996 Geoffrey Noer * remote-e7000.c: don't append :23 to target port if __WIN32__ is defined (it's WinGDB). Sun Apr 7 22:34:29 1996 Fred Fish From: Miles Bader * gnu-nat.c, gnu-nat.h, msg.defs, exc_request.defs, i386gnu-nat.c, msg_reply.defs, notify.defs, process_reply.defs, reply_mig_hack.awk, config/nm-gnu.h, config/i386/{i386gnu.mh, i386gnu.mt, nm-gnu.h, m-i386gnu.h, xm-i386gnu.h}: New files for GNU hurd. Sun Apr 7 13:32:41 1996 Fred Fish * configure.in (case host): Add i386sco5 host. * configure: Regenerate. From: Robert Lipe Add support for SCO OpenServer 5 (a.k.a. 3.2v5*) This target is an SVR3.2 with COFF, ELF, and shared libes, but no /proc. * config/i386/i386sco5.mh: New file. * config/i386/nm-i386sco5.h: New file. Sat Apr 6 08:55:22 1996 Fred Fish * bcache.c (bcache): When size of chunk to cache is exactly equal to BCACHE_MAXLENGTH, stash chunk as unique copy. Sat Apr 6 00:46:26 1996 Fred Fish * symfile.c (INLINE_ADD_PSYMBOL): Remove ifdef. (add_psymbol_to_list): Add an arg for passing CORE_ADDR values and use it, rather than calling add_psymbol_addr_to_list. (add_psymbol_addr_to_list): Delete. (add_psymbol_to_list): Make psymbol static to avoid random data in gaps due to alignment of structure members. * symfile.h (INLINE_ADD_PSYMBOL, ADD_PSYMBOL_TO_LIST, ADD_PSYMBOL_ADDR_TO_LIST): Remove. Real world tests show no performance improvements by inlining via complicated macros and they just make gdb larger and harder to maintain. * dwarfread.c (add_enum_psymbol): Replace ADD_PSYMBOL_TO_LIST and/or ADD_PSYMBOL_ADDR_TO_LIST macro(s) with call to add_psymbol_to_list with appropriate long or CORE_ADDR args. (add_partial_symbol): Ditto. * partial-stab.h: Ditto. * os9kread.c (read_os9k_psymtab): Ditto * mdebugread.c (parse_partial_symbols): Ditto. (handle_psymbol_enumerators): Ditto. (demangle.h): Include. * hpread.c (hpread_build_psymtabs): Ditto. (hpread_build_psymtabs): Ditto. (demangle.h): Include start-sanitize-gdbtk Fri Apr 5 13:44:40 1996 Stan Shebs * gdbtk.c (running_now): New global variable. (gdb_cmd): Test it before executing any command. (gdbtk_call_command): Set it when inferior is running. * gdbtk.tcl (gdbtk_tcl_busy, gdbtk_tcl_idle): Enable and disable interaction with command window's text appropriately. Fri Apr 5 13:25:42 1996 Michael Meissner * gdbtk.c (SIOCSPGRP, linux): If on Linux, undef SIOCSPGRP, since some versions of the kernel don't support it. end-sanitize-gdbtk Thu Apr 4 20:16:55 1996 Fred Fish * configure.in: Check for setpgid function. * config.in: Regenerate with autoheader. * configure: Regenerate with autoconf. * inflow.c (_initialize_inflow): Only try to use _SC_JOB_CONTROL if it is actually defined. (gdb_setpgid): Use HAVE_SETPGID. * ch-exp.c: Change include of to "gdb_string.h". * c-exp.y, f-exp.y, m2-exp.y: Ditto. * c-exp.y, serial.c: Include . * config/m68k/nm-news.h: Add typedef for pid_t which is apparently missing from . Enclose entire file in NM_NEWS_H ifndef and define when included. * config/mips/nm-news-mips.h: Ditto. * config/m68k/tm-m68k.h (REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Change name of temporary variable. Thu Apr 4 19:04:18 1996 Stan Shebs * arm-xdep.c: Move native-specific code to here from arm-tdep.c. * arm-tdep.c (arm_apcs_32): New global. (arm_addr_bits_remove, arm_saved_pc_after_call, arm_push_dummy_frame, arm_pop_frame): New functions. (arm_skip_prologue): Updated version from Richard Earnshaw. (_initialize_arm_tdep): Add set/show "apcs32". * config/arm/tm-arm.h (ADDR_BITS_REMOVE): Call arm_addr_bits_remove. (SAVED_PC_AFTER_CALL): Call arm_saved_pc_after_call. (frame_find_saved_regs): Declare properly. (PUSH_DUMMY_FRAME): Call arm_push_dummy_frame. (POP_FRAME): Call arm_pop_frame, use ADDR_BITS_REMOVE instead of explicit mask. * config/arm/nm-arm.h: New file. * config/arm/xm-arm.h (KERNEL_U_ADDR, FETCH_INFERIOR_REGISTERS): Move definitions to nm-arm.h. * config/arm/arm.mh (NAT_FILE): Define. * symfile.c (generic_load): Initialize data_count properly. Thu Apr 4 17:17:53 1996 Fred Fish * symmisc.c (print_objfile_statistics): Print memory used by psymbol cache obstack. Thu Apr 4 15:43:07 1996 Stan Shebs * symfile.c (report_transfer_performance): New function. (generic_load): Call it to report transfer rate. * remote-e7000.c (e7000_load): Ditto. Mon Apr 1 16:31:00 1996 Stan Shebs * mpw-make.sed: Change references to config.h to be in objdir, edit out rules to rebuild config.h. Mon Apr 1 08:32:23 1996 Fred Fish * hppa-tdep.c (hppa_pop_frame): Call clear_proceed_status before proceeding. Sun Mar 31 16:15:43 1996 Fred Fish * hppah-nat.c (store_inferior_registers, store_inferior_registers, fetch_register, child_xfer_memory): Use call_ptrace function supplied by infptrace.c rather than calling ptrace directly. Sun Mar 31 15:39:00 1996 Stan Shebs * mon960-rom.c: Cleanups and elimination of unused code, clarify documentation string. (mon960_serial, mon960_ttyname): Remove. * config/i960/tm-mon960.h (ADDITIONAL_OPTIONS, ADDITIONAL_OPTION_CASES, ADDITIONAL_OPTION_HELP): Remove. Sat Mar 30 11:00:22 1996 Fred Fish * configure.in: Check whether printf family supports printing long doubles or not and define PRINTF_HAS_LONG_DOUBLE if so. * acconfig.h: Provide default undef for PRINTF_HAS_LONG_DOUBLE. * configure: Regenerate. * valprint.c (print_floating): Use PRINTF_HAS_LONG_DOUBLE. * c-exp.y (parse_number): Use PRINTF_HAS_LONG_DOUBLE. * configure.in: Fix have_gregset and have_fpregset autoconf variable names so that they match the pattern required to cache them. Fri Mar 29 21:39:56 1996 Fred Fish * core-aout.c (fetch_core_registers): Cast core_reg_size to int before testing against reg_ptr. * eval.c (evaluate_subexp_standard): Cast type of TYPE_FN_FIELD_VOFFSET to int. * findvar.c (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer): Cast type of sizeof to int. * values.c (unpack_field_as_long, modify_field): Ditto. * valops.c (value_assign, call_function_by_hand): Ditto. * infcmd.c (do_registers_info): Ditto. * ser-tcp.c (tcp_open): Ditto. * remote.c (putpkt): Ditto. * dcache.c (dcache_peek): Ditto. * dcache.c (dcache_poke): Ditto. * m2-exp.y (yylex): Ditto. * gnu-regex.c (re_match_2): Ditto. * f-lang.c (ADD_BF_SYMNUM, saved_bf_list_end, tmp_bf_ptr): Ifdef out unused macro definition and variables. * inftarg.c (proc_wait): Move from main.c to here, and make static. * valprint.c (val_print_string): Change bufsize from int to unsigned. * main.c (wait.h): Include. * top.c (command_line_input): Remove unused variable "c". * f-typeprint.c (f_type_print_varspec_prefix): Add missing enum value TYPE_CODE_TYPEDEF to switch statement. (f_type_print_varspec_suffix): Add missing enum value TYPE_CODE_TYPEDEF to switch statement. * ch-exp.c (parse_primval): Add remaining enumeration values to switch statement, with no specific action. (ch_lex): Add LOC_UNRESOLVED in switch statement. (pushback_token): Ifdef out, since code using it is ifdef'd out. * stabsread.c (cleanup_undefined_types): Remove unused label "badtype". * objfiles.h (print_symbol_bcache_statistics): Add prototype. * maint.c (objfiles.h): Include. (maintenance_print_statistics): Remove unused variable "temp". * minsyms.c (lookup_minimal_symbol_solib_trampoline): Remove unused variable "found_file_symbol". * m2-exp.y (yylex): Add LOC_UNRESOLVED case to switch. * language.c (lang_bool_type): Use existing function local type variable rather than create block local variables. * solib.c (disable_break): Enclose in ifndef SVR4_SHARED_LIBS. * infptrace.c (wait.h, command.h): Include. * ser-tcp.c (gdb_string.h): Include * i386-tdep.c (codestream_seek): Change "place" to CORE_ADDR. (i386_get_frame_setup): Change "pc" from int to CORE_ADDR. * command.c (complete_on_enum): Make assignment used as truth value explictly check against NULL. (wait.h): Include. * infrun.c (wait_for_inferior): Ifdef out prologue_pc since code that uses it is ifdef'd out. * parser-defs.h: Add prototype for write_dollar_variable. * infrun.c: Add prototype for write_pc_pid. * breakpoint.h: Add prototype for re_enable_breakpoints_in_shlibs. * symmisc.c (bcache.h): Include. * bcache.h: Add prototype for print_bcache_statistics. * symfile.c: Include . * printcmd.c (print_scalar_formatted): Change len to unsigned int. * valarith.c (value_equal): Cast result of TYPE_LENGTH to int. * valarith.c (value_binop): Change result_len, promoted_len1, and promoted_len2 to unsigned int. * valarith.c (value_subscripted_rvalue): Change elt_offs and elt_size to unsigned int. * valops.c (value_array): Change typelength to unsigned int. (destructor_name_p): Change len to unsigned int. * scm-lang.h (scm_parse): Add prototype for scm_unpack. * symfile.c (decrement_reading_symtab): Change return type to void. * valarith.c (value_subscript): Remove unused variable "word". (value_subscript): Remove unused variable "tint". * valops.c (auto_abandon): Ifdef out, since code using it is also ifdef'd out. * eval.c (init_array_element): Remove unused variable "val". * Makefile.in (values.o): Depends on scm-lang.h. (command.o): Depends upon wait_h. (ser-tcp.o): Depends upon gdb_string.h. (infptrace.o): Depends upon wait_h and command_h. (maint.o): Depends on objfiles.h and symfile.h. * values.c (allocate_repeat_value): Remove unused variable "element_type". (scm-lang.h): Include. * breakpoint.c (create_longjmp_breakpoint): Enclose in GET_LONGJMP_TARGET define, unused otherwise. * config/i386/nm-linux.h: Add prototypes for i386_insert_watchpoint, i386_remove_watchpoint and i386_stopped_by_watchpoint. Thu Mar 28 12:53:19 1996 Doug Evans * configure.in (sparc64-*-solaris2*): Delete. Stick with sparc-*-solaris2*. * configure: Regenerated. Thu Mar 28 06:51:26 1996 Fred Fish * valops.c (value_assign): Make copy of internal variable value before returning it as a new value, since it is owned by the internal variable and will be freed along with it. Wed Mar 27 08:36:17 1996 Jeffrey A Law (law@cygnus.com) * From Peter Schauer. * breakpoint.c (breakpoint_re_set_one): Keep temporary breakpoints bp_until, bp_finish, bp_watchpoint_cope, bp_call_dummy and bp_step_resume in case breakpoint_re_set_one is called due to a step over a dlopen call. * infrun.c (wait_for_inferior): Always remove breakpoints from inferior in BPSTAT_WHAT_CHECK_SHLIBS case. Tue Mar 26 13:15:32 1996 Fred Fish * config/mips/tm-mips.h (COERCE_FLOAT_TO_DOUBLE): Only prefer non-prototyped case over prototyped case for C. * config/pa/tm-hppa.h (COERCE_FLOAT_TO_DOUBLE): Ditto. Sat Mar 23 17:24:28 1996 Fred Fish * os9kread.c (os9k_process_one_symbol): Note nonportable assumption that an int can hold a char *. * bcache.h (struct hashlink): Wrap data[] inside union with double to force longest alignment. (BCACHE_DATA): New macro to access data[]. (BCACHE_ALIGNMENT): New macro to get offset to data[]. * bcache.c (lookup_cache, bcache): Use BCACHE_DATA to get address of cached data. Use BCACHE_ALIGNMENT to compute amount of space to allocate for each hashlink struct. Sat Mar 23 12:14:02 1996 Fred Fish * ch-lang.c (evaluate_subexp_chill): Fix typo. Thu Mar 21 08:27:19 1996 Fred Fish * Makefile.in (VERSION): Bump version to 4.15.3 Thu Mar 21 10:56:41 1996 Ian Lance Taylor * config.in: Rename from config.h.in. * configure.in: Call AC_CONFIG_HEADER with config.h:config.in. Change CONFIG_HEADERS test in AC_OUTPUT accordingly. * configure: Rebuild. * Makefile.in (stamp-h): Depend upon config.in, not config.h.in. Set CONFIG_HEADERS to config.h:config.in. Tue Mar 19 12:47:51 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * partial-stab.h (case N_ENDM): Finish current partial symbol table for Solaris 2 cc. Tue Mar 19 10:39:15 1996 Jeffrey A Law (law@cygnus.com) * rs6000-nat.c (exec_one_dummy_insn): Don't clobber the PC in the registers array. From Peter Schauer. Mon Mar 18 13:47:09 1996 Fred Fish * symfile.c (reread_symbols): Reinitialize bcache struct members to zero using memset. Also use memset to reinit global_psymbols and static_psymbols, rather than explicitly resetting each structure member. Sat Mar 16 19:47:36 1996 Fred Fish * configure.in: Add fragment to create stamp-h. From Peter Schauer * configure.in (AC_CHECK_HEADERS): Check for link.h. * configure: Regenerate with autoconf. * config.h.in: Regenerate with autoheader. * config/i386/nm-linux.h: Include solib.h only if HAVE_LINK_H is defined. * solib.c: Exclude most of the code if HAVE_LINK_H is not defined. * config/i386/linux.mh: Reinstate XM_CLIBS, it is needed for older a.out based systems. Sat Mar 16 16:45:43 1996 Fred Fish * config.h.in: New file. * acconfig.h: New file, for autoheader. * configure.in (AC_CONFIG_HEADER): Add, generate config.h. * configure: Regenerate. * Makefile.in (defs_h): Add config.h (distclean): Remove config.h and stamp-h during distclean. (config.h, stamp-h): New targets to remake config.h when necessary. * defs.h (config.h): Include before any other includes or defines. * i386-tdep.c (gdb_string.h): Move include after include of defs.h. * i386v4-nat.c (defs.h): Include before testing HAVE_SYS_PROCFS_H. Sat Mar 16 14:55:27 1996 Fred Fish From Peter Schauer * Makefile.in (INSTALLED_LIBS): Make sure that @LIBS@ will not result in an empty line, to work around a bug in native Ultrix 4.4 and OSF/1-3.2C make. Sat Mar 16 13:33:17 1996 Fred Fish * configure.in: Add gdbserver to configdirs under linux. * configure: Regenerate. Fri Mar 15 12:06:58 1996 J.T. Conklin * config/i386/nm-nbsd.h (FLOAT_INFO): Comment out. * config/i386/tm-nbsd.h (NUM_REGS): Define. Thu Mar 14 10:31:18 1996 Jeffrey A Law (law@cygnus.com) * solib.c (solib_break_names): Add _r_debug_state for vanilla SVR4 implementations. From Peter Schauer. Mon Mar 11 14:24:57 1996 Dawn Perchik * mon960-rom.c: New file; support mon960 rom monitor on i960. * monitor.c (monitor_debug): Change remotedebug to buffer strings. * monitor.c (monitor_open): Add test for flag MO_NO_ECHO_ON_OPEN before epecting prompt and echo during open. * monitor.c (monitor_stop): Add test for flag MO_SEND_BREAK_ON_OPEN to determine if break should be sent as stop command. * monitor.h: Add flags MO_NO_ECHO_ON_OPEN and MO_SEND_BREAK_ON_OPEN. * i960-tdep.c (mon960_frame_chain_valid): New function for getting stack frame on mon960. * Makefile.in: Add mon960 files. * configure.in: Changed i960-*-coff* and i960-*-elf* to target mon960; added i960-nindy-coff* and i960-nindy-elf* for target nindy. * configure: Regenerated. * config/i960/mon960.mt, config/i960/tm-mon960.h: New files; support mon960 rom monitor on i960. Mon Mar 11 11:02:47 1996 Steve Chamberlain With Michael Snyder: * i386-tdep.c (skip_trampoline_code): Fix strncmp length. * win32-nat.c (CHECK, DEBUG*, debug_*): New. (handle_load_dll): Don't reload symbols. (handle_exception): Use the DEBUG_* names. (child_wait): Add DEBUG_* code. (_initialize_inftarg): Add new commands to set debug_ names. Mon Mar 11 09:19:58 1996 Jeffrey A Law (law@cygnus.com) * From Peter Schauer: * breakpoint.c (insert_breakpoints): Use ALL_BREAKPOINTS_SAFE. (bpstat_stop_status): Likewise. (remove_solib_event_breakpoints): Likewise. (clear_momentary_breakpoints): Likewise. (re_enable_breakpoints_in_shlibs): Don't reenable a breakpoint if we still can't read the memory for that breakpoint. (mention): Add bp_shlib_event case to keep gcc quiet. Fri Mar 8 12:08:12 1996 Jeffrey A Law (law@cygnus.com) * breakpoint.h (enum enable): New enum shlib_disabled for shared library breakpoints that have been temporarily disabled. * breakpoint.c: Handle temporarily disabled shared library breakpoints like disabled breakpoints in most places. (insert_breakpoints): Use shlib_disabled to indicate that an unsettable breakpoint is only temporarily disabled. (re_enable_breakpoints_in_shlibs): New function. * corelow.c (solib_add_stub): After adding shared libraries, try to reenable any temporarily disabled breakpoints. * infcmd.c (attach_command): Likewise. * infrun.c (wait_for_inferior): Likewise. Fri Mar 8 11:41:25 1996 Ian Lance Taylor * defs.h (extract_long_unsigned_integer): Declare. * findvar.c (extract_long_unsigned_integer): New function. * printcmd.c (print_scalar_formatted): Use it. * valprint.c (val_print_type_code_int): Likewise. Thu Mar 7 17:40:50 1996 Stan Shebs * infcmd.c (do_registers_info): Ignore anonymous registers. * sh-tdep.c (set processor): New command to set specific processor type. (sh_reg_names, sh3_reg_names): Arrays of register names for SH and SH3 processors. (sh_set_processor_type): New function. * sh3-rom.c (sh3_open): Call it. (sh3_regname): Add names of all the bank registers. (sh3_supply_register): Clean up formatting. * config/sh/tm-sh.h (NUM_REGS, NUM_REALREGS): Increase to include bank registers. (REGISTER_NAMES): Add names of bank registers. (FP15_REGNUM): Define. (REGISTER_VIRTUAL_TYPE): Use it. * monitor.c: Clean up some comments. Thu Mar 7 12:09:51 1996 J.T. Conklin * i386b-nat.c: Revert part of Mar 5 change. FreeBSD collapsed the s* and t* symbols too. Thu Mar 7 15:18:51 1996 James G. Smith * symfile.c (generic_load): Avoid division by zero. Wed Mar 6 17:57:59 1996 Jeffrey A Law (law@cygnus.com) * breakpoint.c (bfd_lookup_symbol): Provide for all SVR4 systems, not just those with HANDLE_SVR4_EXEC_EMULATORS. From Peter Schauer: * breakpoint.c (internal_breakpoint_number): Move to file scope. (create_solib_event_breakpoint): Use an internal breakpoint number. Wed Mar 6 00:32:44 1996 Wilfried Moser (Alcatel) * valarith.c (value_in): Change builtin_type_chill_bool to LA_BOOL_TYPE. Tue Mar 5 23:48:36 1996 Wilfried Moser (Alcatel) * ch-exp.c (parse_primval): Handle CARD, MAX, MIN. (match_string_literal): Handle control sequence. (match_character_literal): Deto. * ch-lang.c (chill_printchar): Change formating of nonprintable characters from C'xx' to ^(num). (chill_printstr): Deto. (value_chill_card, value_chill_max_min): New functions to process Chill's CARD, MAX, MIN. (evaluate_subexp_chill): Process UNOP_CARD, UNOP_CHMAX, UNOP_CHMIN. * expression.h (exp_opcode): Add UNOP_CARD, UNOP_CHMAX, UNOP_CHMIN for Chill's CARD, MAX, MIN. * valarith.c (value_in): Add processing of TYPE_CODE_RANGE and change return type from builtin_type_int to builtin_type_chill_bool. Tue Mar 5 18:54:04 1996 Stan Shebs * config/nm-nbsd.h (link_object, lo_name, etc): Move to here from config/nm-nbsd.h. * config/sparc/nm-nbsd.h (regs, fp_status, etc): Move to here from config/sparc/tm-nbsd.h. * config/m68k/nm-hp300hpux.h (FIVE_ARG_PTRACE): Define here instead of in config/m68k/xm-hp300hpux.h. Tue Mar 5 12:05:35 1996 J.T. Conklin * i386b-nat.c, m68knbsd-nat.c (fetch_core_registers): Provide implementation for NetBSD systems. Mon Mar 4 23:44:16 1996 Per Bothner * valarith.c (binop_user_defined_p): Return 0 for BINOP_CONCAT. (value_concat): Handle varying strings (add COERCE_VARYING_ARRAY). * ch-lang.c (evaluate_subexp_chill case MULTI_SUBSCRIPT): Error if "function" is pointer to non-function. Mon Mar 4 17:47:03 1996 Stan Shebs * top.c (print_gdb_version): Update copyright year. Mon Mar 4 14:44:54 1996 Jeffrey A Law (law@cygnus.com) From Peter Schauer: * infrun.c (wait_for_inferior): Remove breakpoints and switch terminal settings before calling SOLIB_ADD. * solib.c (enable_break, SVR4 variant): Don't map in symbols for the dynamic linker, the namespace pollution causes real problems. Sun Mar 3 17:18:57 1996 James G. Smith * remote-mips.c (common_breakpoint): Explicitly terminate the returned buffer. Wed Feb 28 22:32:18 1996 Stan Shebs From Wilfried Moser : * remote.c (remote_detach): Send a command 'D' to the target when detaching, update the function's comments. Thu Jun 6 16:11:38 1996 Miles Bader * gnu-nat.c (thread_cmd_list): New declaration. (parse_int_arg): New function. Wed Jun 5 17:28:04 1996 Miles Bader * gnu-nat.h (struct proc): Add DETACH_SC field. * gnu-nat.c (make_proc): Set DETACH_SC. (struct inf): Add DETACH_SC & DEFAULT_THREAD_DETACH_SC fields. (make_inf): Set DETACH_SC & DEFAULT_THREAD_DETACH_SC fields. (add_thread_commands): Add set/show for detach-suspend-count. Add takeover-suspend-count cmd. (inf_detach): Set suspend counts to the detach SC, not 0. (set_thread_detach_sc_cmd, show_thread_detach_sc_cmd, set_task_detach_sc_cmd, show_task_detach_sc_cmd, set_thread_default_thread_detach_sc_cmd, show_thread_default_thread_detach_sc_cmd): New functions. (show_task_cmd): Also show detach-suspend-count values. (thread_takeover_sc_cmd): New function. Fri May 31 16:49:24 1996 Miles Bader * gnu-nat.c (show_thread_run_cmd): Actually print state. Thu May 30 10:47:56 1996 Miles Bader * gnu-nat.c (inf_signal): Make unforwardable exceptions an error. Tue May 28 17:06:36 1996 Miles Bader * gnu-nat.c (inf_validate_stopped): proc_getprocinfo takes a pointer to the flags now, not the flags themselves. Mon May 27 13:31:17 1996 Miles Bader * gnu-nat.c (gnu_wait): Print debugging msgs for pending execs. (gnu_create_inferior): Check return from ptrace. Sun May 26 16:56:35 1996 Miles Bader * gnu-nat.h (struct proc): Add DEAD field. * gnu-nat.c (make_proc): Initialize DEAD. (inf_set_traced, inf_validate_task_sc, inf_validate_procs: Frob it. (gnu_wait): Only abort for 0 threads if the task isn't dead. Sat May 25 17:06:05 1996 Miles Bader * gnu-nat.c (inf_signal): Pass SIGCODE when posting a signal. Wed May 22 18:44:28 1996 Miles Bader * gnu-nat.c (S_proc_wait_reply): Add SIGCODE argument. (inf_set_traced): Only give no-signal-thread error message if turning *on* tracing. Wed May 15 13:03:16 1996 Miles Bader * gnu-nat.c (inf_validate_procs): If INF has no threads, always set inf->threads_up_to_date to 0. (inf_signal): Pass in new SIGCODE argument to msg_sig_post_untraced. (gnu_wait): Pass in new TIMEOUT arg to interrupt_operation. (proc_update_sc): Cast thread state arg to thread_set_state. (proc_get_state): Cast thread state arg to thread_get_state. (inf_validate_task_sc): Cast task_basic_info arg to task_info. * i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Call inf_update_procs before we lookup the thread. * config/i386/i386gnu.mh (MH_CFLAGS): New variable. Tue May 7 17:52:33 1996 Miles Bader * gnu-nat.c (gnu_kill_inferior): Use inf_set_task to clear the task. Mon May 6 19:06:49 1996 Miles Bader * gnu-nat.c (inf_set_traced): Use msg_set_init_int with INIT_TRACEMASK instead of setting the exec flags. Fri May 3 19:10:57 1996 Miles Bader * gnu-nat.c (inf_validate_procs): Don't clear INF->task if we find the task's died, so others have a chance at it. (gnu_resume): When single-stepping a single thread, given an error if there is no such thread. When single-stepping one but running the others, just given a warning and still run all the threads. (gnu_wait): If there seem to be no threads, look harder, and signal an error if there really aren't any. (gnu_attach): Reset thread numbering to 0. * i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Give thread name in warning messages. * gnu-nat.c (active_inf): New function. (show_sig_thread_cmd, show_stopped_cmd): Use it. (info_port_rights, info_send_rights_cmd, info_port_sets_cmd, info_recv_rights_cmd, info_port_rights_cmd, info_port_rights_cmd): New functions. (add_task_commands): Add new port-right info commands. Fri Apr 26 20:42:16 1996 Miles Bader * gnu-nat.c (gnu_wait): Instead of _hurd_intr_rpc_mach_msg, just use mach_msg with MACH_RCV_INTERRUPT. (set_noninvasive_cmd): New function. (add_task_commands): Add command entry for `set noninvasive'. Mon Mar 4 14:12:02 1996 Miles Bader * gnu-nat.c (gnu_read_inferior): Use hurd_safe_memmove, not safe_bcopy. (safe_bcopy): Function removed. Mon Dec 4 14:18:26 1995 Miles Bader * gnu-nat.c (proc_update_sc): Assert only threads can have state. (make_proc): Initialize state_valid & state_changed fields. Tue Nov 28 17:51:21 1995 Miles Bader * reply_mig_hack.awk: New file. Tue Nov 14 14:31:03 1995 Miles Bader * breakpoint.c (breakpoint_1): Print breakpoint thread field. * lynx-nat.c (child_wait): Return TARGET_WAITKIND_SPURIOUS for new threads. Mon Nov 13 18:30:53 1995 Miles Bader * target.c (debug_to_check_threads): New function. * inflow.c (terminal_init_inferior_with_pgrp): New function. (terminal_init_inferior): Call terminal_init_inferior_with_pgrp. * inferior.h (terminal_init_inferior_with_pgrp): New declaration, but only if PROCESS_GROUP_TYPE is defined. Mon Nov 6 16:42:09 1995 Miles Bader * target.c (debug_to_thread_alive): Pass through the return value. Thu Nov 2 18:05:00 1995 Miles Bader * target.c (signals, target_signal_from_host, target_signal_to_host): Add mach exceptions. * target.h (enum target_signal): Add mach exceptions. Mon Oct 30 16:41:04 1995 Miles Bader * gnu-nat.c: New file: gnu native backend. * i386gnu-nat.c: New file: i386-specific part of gnu native backend. * gnu-nat.h: New file. * config/nm-gnu.h: New file. * config/tm-i386gnu.h: New file. * config/xm-i386gnu.h: New file. * config/i386/i386gnu.mh: New file. * config/i386/i386gnu.mt: New file. Wed Feb 28 15:50:12 1996 Fred Fish * Makefile.in (VERSION): Bump version to 4.15.2 to establish baseline for gdb 4.16 rerelease testing. Wed Feb 28 13:32:05 1996 Jeffrey A Law (law@cygnus.com) * somsolib.c (som_solib_create_inferior_hook): Before returning call clear_symtab_users. Tue Feb 27 00:04:46 1996 Stu Grossman (grossman@critters.cygnus.com) * remote-e7000.c (e7000_open): Delete all breakpoints when connecting to e7000. Change connect message to allow use of monitor.exp in test suite. * (e7000_load): Print transfer rate of download. * symfile.c (generic_load): Print transfer rate of download. Sun Feb 25 13:58:33 1996 Stan Shebs * configure.in (mips*-*-vxworks*): New config. * configure: Regenerated. * config/mips/vxmips.mt, config/mips/tm-vxmips.h: New files. * remote-vxmips.c (vx_convert_to_virtual, vx_convert_from_virtual): Remove, never used. Sat Feb 24 12:30:28 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * partial-stab.h (case N_FUN): Function symbols generated by SPARCworks cc have a meaningless zero value, do not update pst->textlow if the function symbol value is zero. * stabsread.c (define_symbol): Initialize SYMBOL_TYPE field for function prototype declaration symbols. Fri Feb 23 22:33:04 1996 Stu Grossman (grossman@critters.cygnus.com) * remote-e7000.c (e7000_load): New routine to download via the network. * (e7000_wait): Don't backup PC when we hit a breakpoint. Apparantly new sh2 pods get this right... * (e7000_ops): Add call to e7000_load. Thu Feb 22 00:52:42 1996 J.T. Conklin * config/m68k/{nbsd.mh,nbsd.mt,nm-nbsd.h,tm-nbsd.h,xm-nbsd.h}, m68knbsd-nat.c: New files, support for NetBSD/m68k. * configure.in (m68k-*-netbsd*): New config. * configure: Regenerated. Wed Feb 21 19:00:21 1996 Fred Fish * standalone.c (open, _initialize_standalone): Fix obvious typos reported by Martin Pool . Wed Feb 21 14:24:04 1996 Jeffrey A Law (law@cygnus.com) * solib.c (solib_create_inferior_hook): Fix thinko. Tue Feb 20 23:59:19 1996 Jeffrey A Law (law@cygnus.com) * solib.c (solib_break_names): Define for Solaris and Linux. (enable_break): For SVR4 systems, first try to use the debugger interfaces in the dynamic linker to track shared library events as they happen, then fall back to BKPT_AT_SYMBOL code. Convert BKPT_AT_SYMBOL code to use shared library event breakpoints. (solib_create_inferior_hook): Simplify BKPT_AT_SYMBOL code, it no longer needs to restart/wait on the inferior. * symfile.c (find_lowest_section): No longer static. * symfile.h (find_lowest_section): Corresponding changes. Tue Feb 20 18:54:08 1996 Fred Fish * valops.c (COERCE_FLOAT_TO_DOUBLE): Define default value. (value_arg_coerce): Use COERCE_FLOAT_TO_DOUBLE. * config/alpha/tm-alpha.h (COERCE_FLOAT_TO_DOUBLE): Define to 1. * config/mips/tm-mips.h: Ditto. * config/pa/tm-hppa.h: Ditto. * config/rs6000/tm-rs6000.h: Ditto. * config/sparc/tm-sparc.h: Ditto. Tue Feb 20 17:32:05 1996 J.T. Conklin * config/{i386,ns32k}/nbsd.mh (NATDEPFILES): Remove core-aout.o. * config/nm-nbsd.h (FETCH_INFERIOR_REGISTERS): Defined. * config/xm-nbsd.h (CC_HAS_LONG_LONG, PRINTF_HAS_LONG_LONG): #ifdef'd out definitions --- Causes serious gdb failures on the i386. Need to investigate further before enabling. * i386b-nat.c (fetch_inferior_registers, store_inferior_registers, fetch_core_registers): New functions. These functions are defined if FETCH_INFERIOR_REGISTERS is set. Registers are fetched/stored with ptrace PT_GETREGS/PT_SETREGS. Tue Feb 20 16:55:06 1996 Stu Grossman (grossman@critters.cygnus.com) * findvar.c (extract_floating store_floating): Replace `long double' with `DOUBLEST'. Mon Feb 19 15:25:51 1996 J.T. Conklin * config/xm-nbsd.h (CC_HAS_LONG_LONG, PRINTF_HAS_LONG_LONG): Define. Mon Feb 19 10:32:05 1996 Jeffrey A Law (law@cygnus.com) * symtab.h (looup_minimal_symbol_solib_trampoline): Declare. * breakpoint.h (remove_solib_event_breakpoints): Declare. * breakpoint.c (remove_solib_event_breakpoints): New function. * somsolib.c (solib_create_inferior_hook): Remove all solib event breakpoints before inserting any new ones. Use a solib event breakpoint for the breakpoint at "_start". Remove extraneous "\n" from calls to warning. * breakpoint.c (breakpoint_1): Add missing "sigtramp" to bptypes name array. Mon Feb 19 01:09:32 1996 Doug Evans * dwarfread.c (add_partial_symbol): Use ADD_PSYMBOL_ADDR_TO_LIST for CORE_ADDR values. (new_symbol): Use SYMBOL_VALUE_ADDRESS for CORE_ADDR values. * symfile.h (add_psymbol_{,addr}to_list): Add prototypes. Sun Feb 18 14:37:13 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * mipsread.c (mipscoff_symfile_read): Unconditionally add alpha coff dynamic symbols for all symbol files. Makes skipping over the trampoline code work when stepping from a function in a shared library into a function in a different shared library. Sun Feb 18 09:27:10 1996 Stu Grossman (grossman@cygnus.com) * config/sparc/tm-sparc.h: Define PS_FLAG_CARRY. Define RETURN_VALUE_ON_STACK to return long doubles on the stack. Sat Feb 17 16:33:11 1996 Fred Fish * Makefile.in (ch-exp.o): Add dependencies. (various): Add gdb_string.h to dependencies that need it. Sat Feb 17 08:57:50 1996 Fred Fish * symmisc.c (print_symbol_bcache_statistics): Update description for printing byte cache statistics. Thu Feb 16 16:02:03 1996 Stu Grossman (grossman@cygnus.com) * Add native support for long double data type. * c-exp.y (%union): Change dval to typed_val_float. Use DOUBLEST to store actual data. Change types of INT and FLOAT tokens to typed_val_int and typed_val_float respectively. Create new token DOUBLE_KEYWORD to specify the string `double'. Make production for FLOAT use type determined by parse_number. Add production for "long double" data type. * (parse_number): Use sscanf to parse numbers as float, double or long double depending upon the type of typed_val_float.dval. Also allow user to specify `f' or `l' suffix to explicitly specify float or long double constants. Change typed_val to typed_val_int. * (yylex): Change typed_val to typed_val_int. Also, scan for "double" keyword. * coffread.c (decode_base_type): Add support for T_LNGDBL basic type. * configure, configure.in: Add check for long double support in the host compiler. * defs.h: Define DOUBLEST appropriatly depending on whether HAVE_LONG_DOUBLE (from autoconf) is defined. Also, fix prototypes for functions that handle this type. * expression.h (union exp_element): doubleconst is now type DOUBLEST. * m2-exp.y f-exp.y (%union): dval becomes type DOUBLEST. * findvar.c (extract_floating): Make return value be DOUBLEST. Also, add support for numbers with size of long double. * (store_floating): Arg `val' is now type DOUBLEST. Handle all floating types. * parser-defs.h parse.c (write_exp_elt_dblcst): Arg expelt is now DOUBLEST. * valarith.c (value_binop): Change temp variables v1, v2 and v to type DOUBLEST. Coerce type of result to long double if either op was of that type. * valops.c (value_arg_coerce): If argument type is bigger than double, coerce to long double. * (call_function_by_hand): If REG_STRUCT_HAS_ADDR is defined, and arg type is float and > 8 bytes, then use pointer-to-object calling conventions. * valprint.c (print_floating): Arg doub is now type DOUBLEST. Use appropriate format and precision to print out floating point values. * value.h: Fixup prototypes for value_as_double, value_from_double, and unpack_double to use DOUBLEST. * values.c (record_latest_value): Remove check for invalid floats. Allow history to store them so that people may examine them in hex if they want. * (value_as_double unpack_double): Change return value to DOUBLEST. * (value_from_double): Arg `num' is now DOUBLEST. * (using_struct_return): Use RETURN_VALUE_ON_STACK macro (target specific) to expect certain types to always be returned on the stack. Fri Feb 16 14:00:54 1996 Fred Fish * bcache.c, bcache.h: New files to implement a byte cache. * Makefile.in (SFILES): Add bcache.c. (symtab_h): Add bcache.h. (HFILES_NO_SRCDIR): add bcache.h (COMMON_OBJS): Add bcache.o (bcache.o): New target. * dbxread.c (start_psymtab): Make global_syms & static_syms type "partial_symbol **". * hpread.c (hpread_start_symtab): Ditto. * os9kread.c (os9k_start_psymtab): Ditto. * stabsread.h (start_psymtab): Ditto. * {symfile.c, symfile.h} (start_psymtab_common): Ditto. * maint.c (maintenance_print_statistics): Call print_symbol_bcache_statistics. * objfiles.c (allocate_objfile): Initialize psymbol bcache malloc and free pointers. * solib.c (allocate_rt_common_objfile): Ditto. * symfile.c (reread_symbols): Ditto. (free_objfile): Free psymbol bcache when objfile is freed. (objfile_relocate): Use new indirect psymbol pointers. * objfiles.h (struct objfile): Add psymbol cache. * symfile.c (compare_psymbols): Now passed pointers to pointers to psymbols. (reread_symbols): Free psymbol bcache when freeing other objfile resources. (add_psymbol_to_list, add_psymbol_addr_to_list): Initialize new psymbol using the psymbol bcache. (init_psymbol_list): Psymbol lists now contain pointers rather than the actual psymbols. * symfile.h (psymbol_allocation_list): Psymbol lists now dynamically grown arrays of pointers. (ADD_PSYMBOL_VT_TO_LIST): Initialize new symbol using the psymbol bcache. * symmisc.c (print_partial_symbols): Now takes pointer to pointer to partial symbol. (print_symbol_bcache_statistics): New function to print per objfile bcache statistics. (print_partial_symbol, print_partial_symbols, maintenance_check_symtabs, extend_psymbol_list): Account for change to pointer to pointer to partial symbol. * symtab.c (find_pc_psymbol, lookup_partial_symbol, decode_line_2, make_symbol_completion_list): Account for change to pointer to pointer to partial symbol. * symtab.h (bcache.h): Include. * xcoffread.c (xcoff_start_psymtab): Make global_syms & static_syms type "partial_symbol **". Fri Feb 16 10:02:34 1996 Fred Fish * dwarfread.c (free_utypes): New function. (read_file_scope): Call free_utypes as cleanup, rather than just freeing the utypes pointer. Thu Feb 15 21:40:52 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * demangle.c (is_cplus_marker): New function, checks if a character is one of the commonly used C++ marker characters. * defs.h (is_cplus_marker): Add prototype. * c-typeprint.c (c_type_print_base), ch-lang.c (chill_demangle), cp-valprint.c (cp_print_class_method), mdebugread.c (parse_symbol), stabsread.c (define_symbol, read_member_functions, read_struct_fields), symtab.h (OPNAME_PREFIX_P, VTBL_PREFIX_P, DESTRUCTOR_PREFIX_P), values.c (vb_match): Use is_cplus_marker instead of comparison with CPLUS_MARKER. Thu Feb 15 18:08:13 1996 Fred Fish * symfile.h (INLINE_ADD_PSYMBOL): Default this to 0 and possibly delete entirely someday. Thu Feb 15 15:25:34 1996 Stan Shebs * mpw-make.sed: Edit out makefile rebuild rule. (host_alias, target_alias): Comment out instead of deleting. (@LIBS@): Edit out references. Tue Feb 13 22:56:46 1996 Fred Fish * symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list): Use n_psyms in OBJSTAT, not psyms. Mon Feb 12 15:59:31 1996 Doug Evans * configure.in (sparclet-*-aout*): New config. * configure: Regenerated. Mon Feb 12 14:17:52 1996 Fred Fish * somsolib.c (som_solib_add): Use xmalloc rather than bare unchecked call to malloc. * remote-mips.c (pmon_load_fast): ditto. * remote-mm.c (mm_open): ditto. * hpread.c (hpread_lookup_type): ditto. * remote-adapt.c (adapt_open): ditto. Mon Feb 12 13:11:32 1996 Fred Fish * f-lang.c (allocate_saved_bf_node, allocate_saved_function_node, allocate_saved_f77_common_node, allocate_common_entry_node, add_common_block): Use xmalloc rather than malloc, some of which were unchecked. * gnu-regex.c: At same point as other gdb specific changes #undef malloc and then #define it to xmalloc. * ch-exp.c (growbuf_by_size): Use xmalloc/xrealloc rather than bare unchecked calls to malloc/realloc. * stabsread.c (dbx_lookup_type): Use xmalloc rather than bare unchecked call to malloc. Wed Feb 7 11:31:26 1996 Stu Grossman (grossman@cygnus.com) * symtab.c (gdb_mangle_name): Change opname var to be const to match return val of cplus_mangle_name. * i960-tdep.c: Change arg types of next_insn to match callers. Wed Feb 7 07:34:24 1996 Fred Fish * config/i386/linux.mh (XM_CLIBS, GDBSERVER_LIBS): Remove. These apparently aren't needed in any reasonably recent version of linux. Tue Feb 6 21:37:03 1996 Per Bothner * stabsread.c (read_range_type): If !self-subrange and language is Chill, assume a true range. If a true_range is a sub_subrange, use builtin_type_int for index_type. Tue Feb 6 18:38:51 1996 J.T. Conklin * nindy-share/nindy.c (say): Use stdarg.h macros when compiling with an ANSI compiler. start-sanitize-gdbtk Tue Feb 6 16:31:25 1996 Tom Tromey * gdbtk.tcl (create_file_win): Eliminate text widget B1 binding so double-clicking will work again. (create_asm_win): Put "break" at end of all B1 bindings. (create_file_win): Lower "sel" tag, don't raise it. (ensure_line_visible): New proc. (update_listing, update_assembly): Use it. (create_copyright_window): Destroy window on Leave event. (create_command_window): Put "break" at end of all B2 bindings. end-sanitize-gdbtk Mon Feb 5 18:24:28 1996 Steve Chamberlain From Michael_Snyder@NeXT.COM (Michael Snyder): * valops.c (value_arg_coerce): Coerce float to double, unless the function prototype specifies float. Mon Feb 5 09:51:55 1996 Tom Tromey * language.c (set_language_command): Use languages table when printing available languages. Sat Feb 3 12:22:05 1996 Fred Fish Fix problems reported by Hans Verkuil (hans@wyst.hobby.nl): * command.c (add_cmd): Add missing initialization for enums member. Reorder members to match structure declaration to make it easier to tell when one is missing. * exec.c (exec_file_command): Fix problem where filename in malloc'd memory is referenced after being freed. Sat Feb 3 03:26:21 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * dwarfread.c (read_func_scope): Avoid GDB core dumps if AT_name tag is missing. * procfs.c (procfs_stopped_by_watchpoint): Fix logic when FLTWATCH and FLTKWATCH are defined. * remote.c (remote_read_bytes): Advance memaddr for transfers, return number of bytes transferred for partial reads. * top.c (init_signals): Reset SIGTRAP to SIG_DFL. Fri Feb 2 13:40:50 1996 Steve Chamberlain * win32-nat.c (mappings): Add ppc registers. (child_resume): Turn off step for ppc. Thu Feb 1 10:29:31 1996 Steve Chamberlain * config/powerpc/(cygwin32.mh, cygwin32.mt, tm-cygwin32.h, xm-cygwin32.h): New. * config/i386/(*win32*): Becomes *cygwin32*. * configure.in (i[3456]86-*-win32*): Becomes i[3456]86-*-cygwin32. (powerpcle-*-cygwin32): New. * configure: Regenerate. * win32-nat.c (child_create_inferior): Call CreateProcess with the right program arg. Thu Feb 1 11:01:10 1996 Jeffrey A Law (law@cygnus.com) * config/pa/tm-hppa.h (SOFT_FLOAT): Provide a default definition. Wed Jan 31 19:01:28 1996 Fred Fish * serial.c: Change fputc/fputs/fprintf to _unfiltered forms. Wed Jan 31 18:36:27 1996 Stan Shebs * config/sparc/xm-sun4os4.h (HAVE_TERMIOS): Remove. * config/sparc/xm-sparc.h (HAVE_WAIT_STRUCT): Remove, never used. * config/i386/nm-i386mach.h (CHILD_PREPARE_TO_STORE): Move to here from config/i386/xm-i386mach.h, fix name. * config/i386/nm-sun386.h: Ditto, from config/i386/xm-sun386.h. * config/i386/nm-ptx4.h (CHILD_PREPARE_TO_STORE): Move to here from config/i386/xm-ptx4.h. * config/i386/nm-ptx4.h: Ditto, from config/i386/xm-ptx.h. * config/i386/nm-symmetry.h: Ditto, from config/i386/xm-symmetry.h. * config/m68k/nm-sun3.h: Ditto, from config/m68k/xm-sun3.h. * config/sparc/nm-nbsd.h: Ditto, from config/sparc/xm-nbsd.h. * config/sparc/nm-sun4os4: Ditto, from config/sparc/xm-sparc.h. * config/sparc/nm-sun4sol2.h: New file, renamed from nm-sysv4.h. (PRSVADDR_BROKEN): Move here from xm-sun4sol2.h. * config/sparc/sun4sol2.mh (NAT_FILE): Update. Wed Jan 31 17:20:26 1996 Jeffrey A Law (law@cygnus.com) * config/pa/tm-hppa.h (EXTRACT_RETURN_VALUE): Handle software floating point correctly. (STORE_RETURN_VALUE): Likewise. * config/pa/tm-pro.h (SOFT_FLOAT): define. Wed Jan 31 13:34:52 1996 Fred Fish * config/i386/xm-linux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): Define to what should be reasonable values. However, apparently a bug in linux mmap prevents mapped symbol tables from working. Tue Jan 30 18:26:19 1996 Fred Fish * defs.h (errno.h>: Move #include closer to head of file to solve obscure problem with systems that declare perror with const arg, in both errno.h and stdio.h, and const is defined away by intervening local include. Tue Jan 30 15:41:10 1996 Fred Fish From Jon Reeves : * i386-stub.c (getpacket): Change fprintf stream from "gdb" to stderr. (mem_fault_routine): Fix misplaced volatile type qualifier in decl. Mon Jan 29 19:05:58 1996 Fred Fish * Makefile.in (diststuff): Make all-doc; diststuff target does not exist in doc/Makefile.in. Mon Jan 29 18:44:57 1996 Stan Shebs * config/m88k/xm-cxux.h (BP_HIT_COUNT): Remove, never used. Mon Jan 29 00:10:35 1996 Wilfried Moser (Alcatel) * ch-valprint.c (calculate_array_length): New function to determine the length of an array type. (chill_val_print (case TYPE_CODE_ARRAY)): If the length of an array type is zero, call calculate_array_length. * gdbtypes.c (get_discrete_bounds (case TYPE_CODE_ENUM)): The values may not be sorted. Scan all entries and set the real lower and upper bound. Sun Jan 28 15:50:42 1996 Fred Fish * config/xm-linux.h: Move include of solib.h and #define of SVR4_SHARED_LIBS from here ... * config/nm-linux.h: ...to here. Sat Jan 27 10:34:05 1996 Fred Fish * configure.in (AC_CHECK_HEADERS): Check for sys/procfs.h. Also check for gregset_t and fpregset_t types. * configure: Regenerate. * core-regset.c (sys/procfs.h): Only include if HAVE_SYS_PROCFS_H is defined. (fetch_core_registers): Turn into stub unless both HAVE_GREGSET_T and HAVE_FPREGSET_T are defined. These changes allow systems like linux that are migrating to /proc support to use a single configuration for both new and old versions. * config/i386/linux.mt: Note that this is now for both a.out and ELF systems. * config/i386/linux.mh (NATDEPFILES): Add solib.o, core-regset.o, i386v4-nat.o * config/i386/tm-linux.h (tm-sysv4.h): Include. * config/i386/xm-linux.h (solib.h): Include (SVR4_SHARED_LIBS): Define. * i386v4-nat.c: Only compile if HAVE_SYS_PROCFS_H is defined. (supply_gregset, fill_gregset): Compile if HAVE_GREGSET_T defined. (supply_fpregset, fill_fpregset): Compile if HAVE_FPREGSET_T defined. Fri Jan 26 13:48:14 1996 Stan Shebs * config/sparc/xm-sparc.h (NEW_SUN_CORE): Remove, never used. * config/i386/xm-sun386.h: Ditto. * config/m68k/xm-sun2.h, config/m68k/xm-sun3.h: Ditto. Thu Jan 25 16:05:53 1996 Tom Tromey * Makefile.in (INSTALLED_LIBS, CLIBS): Include @LIBS@. Thu Jan 25 09:22:15 1996 Steve Chamberlain From Greg McGary : * dcache.c (dcache_peek, dcache_poke): Advance addr for multi-byte I/O. Thu Jan 25 13:08:51 1996 Doug Evans (dje@cygnus.com) * infrun.c (normal_stop): Fix test for shared library event. Thu Jan 25 03:26:38 1996 Doug Evans * configure.in (sparc64-*-*): Add default host configuration. start-sanitize-gdbtk (sparc64-*-solaris2* host): Link statically if GCC used. end-sanitize-gdbtk (sparc64-*-solaris2*): Add target configuration. * configure: Regenerated. * sparc/sp64sol2.mt: New file. Wed Jan 24 22:31:37 1996 Doug Evans * Makefile.in (RUNTEST): srcdir renamed to rootsrc. Wed Jan 24 15:42:24 1996 Tom Tromey * Makefile.in (lint): Close backquotes. start-sanitize-gdbtk Wed Jan 24 15:28:41 1996 Tom Tromey * gdbtk.tcl, gdbtk.c: Updated copyrights. * configure.in: Look for -ldl or -ldld when using Tcl 7.5 or greater. * configure: Rebuilt. end-sanitize-gdbtk Wed Jan 24 13:19:10 1996 Fred Fish * NEWS: Make note of new record and replay feature for remote debug sessions. * serial.c (gdbcmd.h): Include. (serial_logfile, serial_logfp, serial_reading, serial_writing): Define here, for remote debug session logging. (serial_log_command, serial_logchar, serial_write, serial_readchar): New functions for remote debug session logging. (serial_open): Open remote debug session log file when needed. (serial_close): Close remote debug session log file when needed. (_initialize_serial): Add set/show commands for name of remote debug session log file. * serial.h (serial_readchar): Declare (SERIAL_READCHAR): Call serial_readchar(). (SERIAL_WRITE): Call serial_write(). (serial_close): Declare as extern. (serial_logfile, serial_logfp): Declare. * top.c (execute_command): Declare serial_logfp. Log user command in remote debug session log if log file is open. * remote-array.c (array_wait): #ifdef out echo to gdb_stdout. (array_read_inferior_memory): Rewrite to fix memory overwrite bug. * remote-array.c (SREC_SIZE): Remove, duplicates define in monitor.h. * remote-array.c (hexchars, hex2mem): Remove, unused. * gdbserver/low-linux.c (store_inferior_registers): Remove unnecessary extern declaration of registers[]. * gdbserver/Makefile.in (all): Add gdbreplay. * gdbserver/gdbreplay.c: New file. * gdbserver/README: Give example of recording a remote debug session with gdb and then replaying it with gdbreplay. Tue Jan 23 18:02:35 1996 Per Bothner * stabsread.c (rs6000_builtin_type): Make bool type unsigned. (read_one_struct_field): Support boolean bitfields. * c-valprint.c (c_val_print): Print booleans properly. Tue Jan 23 18:54:09 1996 Stan Shebs * remote-vxsparc.c (vx_convert_to_virtual, vx_convert_from_virtual): Remove, never used. * config/sparc/vxsparc.mt (TDEPFILES): Add remote-vxsparc.o. Tue Jan 23 14:36:05 1996 Per Bothner * ch-exp.c (parse_tuple): Error if invalid mode. * value.h (COERCE_ARRAY): Don't coerce enums. (COERCE_ENUM): Don't COERCE_REF. (COERCE_NUMBER): New macro (same as COERCE_ARRAY then COERCE_ENUM). * valops.c (value_assign): Only do COERCE_ARRAY if internalvar (let value_cast handle it otherwise); do *not* COERCE_ENUM either way. * valarith.c: Use COERCE_NUMBER instead od COEREC_ARRAY. Add COERCE_REF before COERCE_ENUM. * values.c (value_as_long): Simplify. * valops.c (value_array): Create internalvar if !c_style_arrays. * language.c (lang_bool_type): Add Fortran support. * eval.c (OP_BOOL): Use LA_BOOL_TYPE. Tue Jan 23 13:08:26 1996 Jeffrey A Law (law@cygnus.com) * symfile.c (auto_solib_add): Renamed from auto_solib_add_at_startup. All references changed. * breakpoint.c (bpstat_what): Add shlib_event to the class types. Update state table. Reformat so that it's still readable. When we hit the shlib_event breakpoint, set the calss of shlib_event. (breakpoint_1): Add "shlib events" as a breakpoint type. Print the shlib_event breakpoint like other breakpoints. (create_solib_event_breakpoint): New function. (breakpoint_re_set_one): Handle solib_event breakpoints. * breakpoint.h (enum bytype): Add bp_shlib_event breakpoint type. (enum bpstat_what_main_action): Add BPSTAT_WHAT_CHECK_SHLIBS action. (create_solib_event_breakpoint): Declare. * infrun.c (wait_for_inferior): Handle CHECK_SHLIBS bpstat. (normal_stop): Inform the user when the inferior stoped due to a shared library event. (_initialize_infrun): Add new set/show variable "stop-on-solib-events" to control whether or not gdb continues the inferior or stops it when a shared library event occurs. * minsyms.c (lookup_minimal_symbol_solib_trampoline): New function. * somsolib.c (TODO list): Update. (som_solib_create_inferior_hook): Arrange for gdb to be notified when significant shared library events occur. * hppa-tdep.c (find_unwind_entry): No longer static. Tue Jan 23 09:00:48 1996 Doug Evans * printcmd.c (print_insn): Pass fprintf_unfiltered to INIT_DISASSEMBLE_INFO. start-sanitize-gdbtk * gdbtk.c (gdb_disassemble): Likewise. end-sanitize-gdbtk Mon Jan 22 16:59:40 1996 Stan Shebs * remote.c (remotebreak): New GDB variable. (remote_break): New global. (remote_interrupt): Send a break instead of ^C if remote_break. * NEWS: Describe the new variable. Mon Jan 22 16:24:11 1996 Doug Evans * sparc-tdep.c (_initialize_sparc_tdep): Always use print_insn_sparc. Fri Jan 19 07:19:38 1996 Fred Fish * hp300ux-nat.c (getpagesize): Remove unused function fetch_core_registers. (hp300ux_core_fns): Remove, is unused. (_initialize_core_hp300ux): Remove, is unused. (gdbcore.h): Remove #include, no longer needed. Fri Jan 19 00:59:53 1996 Jeffrey A Law (law@cygnus.com) * rs6000-nat.c (exec_one_dummy_insn): Rework to avoid ptrace bug in aix4.1.3 on the rs6000. Wed Jan 17 13:22:27 1996 Stan Shebs * remote-hms.c (hms_ops): Add value for to_thread_alive. * remote-nindy.c (nindy_ops): Ditto. * remote-udi.c (udi_ops): Ditto. Tue Jan 16 18:00:35 1996 James G. Smith * remote-mips.c (pmon_opn, pmon_wait, pmon_makeb64, pmon_zeroset, pmon_checkset, pmon_make_fastrec, pmon_check_ack, pmon_load_fast): New functions. Support for the PMON monitor world. (common_open): New function to merge support for different monitors. (mips_open): Use common_open(). (mips_send_command): New function. (mips_send_packet): Scan out-of-sequence packets. (mips_enter_debug, mips_exit_debug): New functions. (pmon_ops): New target definition structure. Tue Jan 16 11:22:58 1996 Stu Grossman (grossman@cygnus.com) * Makefile.in (CLIBS): Add LIBS to allow libraries to be specified on the make command line (via make LIBS=xxx). start-sanitize-gm * configure.in (enable-gm): magic.o -> gmagic.o. end-sanitize-gm start-sanitize-gdbtk Mon Jan 15 09:58:41 1996 Tom Tromey * gdbtk.tcl (create_expr_window): Many changes to update GUI. (add_expr): Changes from create_expr_window. (create_command_window): Set focus. (delete_expr): Rewrote. (expr_update_button): New proc. (add_expr): Put bindings on FocusIn, FocusOut. Don't allow .file_popup to be torn off. end-sanitize-gdbtk Fri Jan 12 21:41:58 1996 Jeffrey A Law (law@cygnus.com) * symtab.c (find_pc_symtab): Don't lose if OBJF_REORDERED is set but there are no psymtabs. Fri Jan 12 15:56:12 1996 Steve Chamberlain * dsrec.c (load_srec): Remove unused variable. * monitor.c (monitor_expect): Don't expect a ^C to echo. * serial.c (serial_open): Add parallel interface. * sh3-rom.c (parallel, parallel_in_use): New. (sh3_load): If parallel_in_use, download though the parallel port. (sh3_open): Open parallel port if specified. (sh3_close): New function. (_inititalize_sh3): Add sh3_close hook and documentation. * monitor.c (monitor_close): Export. * monitor.h (monitor_close): Add prototype. Fri Jan 12 13:11:42 1996 Stan Shebs From Wilfried Moser : * remote.c (remotetimeout): New GDB variable, use to set the remote timeout for reading. start-sanitize-gdbtk Fri Jan 12 09:36:17 1996 Tom Tromey * gdbtk.tcl (gdbtk_tcl_query): Swap Yes and No buttons. (update_listing): Use lassign. Use "see" to scroll. Don't need screen_top, screen_bot, screen_height. (update_assembly): Use "see" to scroll. (textscrollproc): Removed. (create_file_win): Don't use textscrollproc. (asmscrollproc): Removed. (create_asm_window): Don't use asmscrollproc. (create_asm_win): Ditto. (screen_height, screen_top, screen_bot): Removed. (run_editor): New proc. (build_framework): Use it. (create_file_win, create_source_window): Don't use textscrollproc. (create_breakpoints_window): Set -xscrollcommand on canvas. (not_implemented_yet): Default button is 0. (delete_char): Don't use tk_textBackspace. (create_command_window): Allow Tk bindings to fire after deleting character. (create_command_window): Make Delete delete left, not right. end-sanitize-gdbtk Fri Jan 12 07:14:27 1996 Fred Fish * lynx-nat.c, irix4-nat.c, sparc-nat.c: Include gdbcore.h to get "struct core_fns" defined. * Makefile.in (lynx-nat.o, irix4-nat.o, sparc-nat.o): Are dependent upon gdbcore_h. Thu Jan 11 23:13:24 1996 Per Bothner * symfile.c (decrement_reading_symtab): New function. * symfile.c, symtab.h (currently_reading_symtab): New variable. * symfile.c (psymtab_to_symtab): Adjust currently_reading_symtab. * gdbtypes.c (check_typedef): Don't call lookup_symbol if currently_reading_symtab (since that could infinitely recurse). Thu Jan 11 17:21:25 1996 Per Bothner * stabsread.c (read_struct_type): Trivial simplification. * stabsread.c (define-symbol): Use invisible references for TYPE_CODE_SET and TYPE_CODE_BITSTRING too. * valops.c (call_function_by_hand): Likewise. * eval.c (evaluate_subexp_standard): When known, use the formal parameter type as the expected type when evaluating arg expressions. * ch-lang.c (evaluate_subexp_chill): Likewise (for MULTI_SUBSCRIPT). start-sanitize-gdbtk Thu Jan 11 10:08:14 1996 Tom Tromey * main.c (main): Disable window interface if --help or --version specified. * gdbtk.tcl (FSBox): Don't use tk_listboxSingleSelect. Changes in sync with expect: * configure.in (ENABLE_GDBTK): Use CY_AC_PATH_TCL and CY_AC_PATH_TK. * aclocal.m4: Replaced with version from expect. * configure: Regenerated. end-sanitize-gdbtk Wed Jan 10 16:08:49 1996 Brendan Kehoe * configure.in, configure: Recognize rs6000-*-aix4*. * config/powerpc/xm-aix.h: Reduce to include "xm-aix4.h". * config/rs6000/aix4.mh (XM_FILE): Point to xm-aix4.h. * config/rs6000/xm-aix4.h: New file. * config/xm-aix4.h: New file. Wed Jan 10 11:25:37 1996 Fred Fish From Wilfried Moser : * gdbserver/low-linux.c: New file. * remote.c (remote_read_bytes): Fix aborts on larger packets. * config/i386/linux.mh (GDBSERVER_DEPFILES, GDBSERVER_LIBS): Define. * stabsread.c (define_symbol): If register value is too large, tell what it is and what max is. start-sanitize-gdbtk Wed Jan 10 09:07:22 1996 Tom Tromey * gdbtk.tcl (gdbtk_tcl_fputs, gdbtk_tcl_fputs_error, gdbtk_tcl_flush): Use "see", not "yview". (gdbtk_tcl_query): Use questhead bitmap. various: Always wrap condition of 'if' in {...}. (add_breakpoint_frame): Set -value on radiobuttons. (lassign): New proc. (add_breakpoint_frame): Use lassign, not series of assignments. (decr): Made faster. (interactive_cmd): Use "see", not "yview". (not_implemented_yet): Use warning bitmap. (update_expr): Don't allow $expr to be evalled by Tcl. (create_expr_window): Don't use "focus". (delete_char, delete_line): Define globally. (delete_line, delete_char, create_command_window, update_autocmd, build_framework, create_asm_win, create_file_win): Use "see", not "yview". (create_copyright_window, center_window, bind_widget_after_class): New procs. (FSBox,create_command_window, create_autocmd_window): Binding changes for Tk4. (textscrollproc): Define globally. (build_framework): tk_menuBar no longer needed. Keys Prior, Next, Home, End, Up, and Down are all defined by Tk. (apply_filespec): Use error bitmap in dialog. (files_command): Don't use tk_listboxSingleSelect. (files_command): Don't use "uniq" to remove duplicates from a list. (update_assembly): Use lassign. (create_asm_win): Removed redundant bindings. (listing_window_button_1, file_popup_menu): Use tk_popup. (ButtonRelease-1 binding): Just remove tag from window; rest handled by Tk. * gdbtk.c (gdbtk_query): Use Tcl_Merge to provide quoting. (call_wrapper): Use Tcl_Eval, not Tcl_VarEval. (gdbtk_call_command): Ditto. end-sanitize-gdbtk Tue Jan 9 09:33:53 1996 Jeffrey A Law (law@cygnus.com) * hpread.c (hpread_build_psymtabs): Finish Jan 4th enum namespace -> enum_namespace change. Tue Jan 9 04:44:47 1996 Wilfried Moser (Alcatel) * ch-exp.c (parse_primval): In case ARRAY, add missing FORWARD_TOKEN (). Mon Jan 8 13:29:34 1996 Stan Shebs * remote-mips.c (mips_receive_header): Recognize \012 instead of \n, but write \n when program sends a \012. * ser-mac.c (mac_input_buffer): Increase size of buffer. Mon Jan 8 12:00:40 1996 Jeffrey A Law (law@cygnus.com) * infptrace.c (initialize_infptrace): Move function out of #ifdef conditional; put code within the function inside an #ifdef conditional. * buildsym.c (end_symtab): Remove sort_pending and sort_linevec arguments. Sorting is now dependent on OBJF_REORDERED. All callers/references changed. * dbxread.c (read_ofile_symtab): Correctly determine value for last_source_start_addr for reordered executables. (process_one_symbol): Handle N_FUN with no name as an end of function marker. * partial-stab.h (case N_FN, N_TEXT): Don't assume CUR_SYMBOL_VALUE is the high text address for a psymtab. (case N_SO): Likewise. (case N_FUN): Handle N_FUN with no name as an end of function marker. * minsyms.c (lookup_minimal_symbol_by_pc): Examine all symbols at the same address rather than a random subset of them. * coffread.c (coff_symfile_init): Set OBJF_REORDERED. * elfread.c (elf_symfile_init): Similarly. * somread.c (som_symfile_init): Similarly. * xcoffread.c (xcoff_symfile_init): Similarly. Fri Jan 5 17:46:01 1996 Stu Grossman (grossman@cygnus.com) * stack.c (print_stack_frame print_frame_info) symmisc.c (dump_symtab): Change RETURN_MASK_ERROR to RETURN_MASK_ALL so that catch_errors doesn't get blindsided by QUIT and lose the cleanup chain. This fixes a problem where ^C while in a user-defined command sometimes leaves instream NULL and causes a segfault in command_loop. Fri Jan 5 13:59:16 1996 Brendan Kehoe * configure.in, configure: Add `-ldl -lw' for Solaris linking. Fri Jan 5 12:02:00 1996 Steve Chamberlain * config/sh/sh.mt, config/powerpc/*.mt, config/pa/hppapro.mt, config/m68k/monitor.mt, config/h8500/h8500.mt, config/h8300/h8300.mt: srec.o renamed to dsrec.o. Thu Jan 4 16:04:54 1996 Stu Grossman (grossman@cygnus.com) * breakpoint.c (remove_breakpoint): Change error to warning so that hardware watchpoint removal problems won't leave breakpoint traps in the target. start-sanitize-gdbtk * configure configure.in: Make --enable-gdbtk be the default. end-sanitize-gdbtk * remote-e7000.c (e7000_insert_breakpoint, e7000_remove_breakpoint): Use e7000 based breakpoints, not memory breakpoints. * (e7000_wait): Adjust PC back by two when we see a breakpoint to compensate for e7000 maladjustment. * sparcl-tdep.c (sparclite_check_watch_resources): Fix logic bug which prevented hardware watchpoints from working. Thu Jan 4 10:44:17 1996 Fred Fish * infptrace.c (udot_info): New function. (PT_*): Define each individually if that one is not defined. * rs6000-nat.c (kernel_u_size): New function Include for "struct user" * alpha-nat.c (kernel_u_size): New function. Include for "struct user" * sparc-nat.c (kernel_u_size): New function. Include for "struct user" * i386b-nat.c (kernel_u_size): New function. * i386v-nat.c (kernel_u_size): New function. * config/i386/nm-fbsd.h (KERNEL_U_SIZE): Define. (kernel_u_size): Declare. * config/i386/nm-linux.h (KERNEL_U_SIZE): Define. (kernel_u_size): Declare. * config/sparc/nm-sun4os4.h (KERNEL_U_SIZE): Define. (kernel_u_size): Declare. * config/alpha/nm-osf2.h (KERNEL_U_SIZE): Define. (kernel_u_size): Declare. * config/rs6000/nm-rs6000.h (KERNEL_U_SIZE): Define. (kernel_u_size): Declare. Thu Jan 4 11:00:01 1996 steve chamberlain * mdebugread.c (mylookup_symbol): enum namespace becomes enum_namespace type. * symfile.c (add_psymbol_to_list) (add_psymbol_addr_to_list): Ditto. * symtab.c (lookup_partial_symbol): Ditto. (lookup_symbol): Ditto. (lookup_block_symbol): Ditto. * win32-nat.c (handle_load_dll): Use incoming dll base. (child_wait): Catch DLL load errors. (create_child_inferior): Translated between paths correctly. Wed Jan 3 23:13:53 1996 Fred Fish * i386v4-nat.c (supply_gregset, fill_gregset): Subtract NUM_FREGS from NUM_REGS to get number of general registers that we care about. * config/i386/tm-i386.h (REGISTER_BYTES): Define in terms of number of general regs and number of floating point regs. Wed Jan 3 19:49:54 1996 steve chamberlain * config/i386/tm-win32.h (IN_SOLIB_CALL_TRAMPOLINE): New. (SKIP_TRAMPOLINE_CODE): New. * config/i386/xm-win32.h (CANT_FORK): Deleted. (SLASH*) Changed to use unix style slash. * symtab.h (namespace enum): becomes typedef to avoid namespace collision in C++. * infcmd.c (path_command): Use empty string if PATH name not set. * i386-tdep.c (skip_trampoline_code): New function. * srec.c: Renamed dsrec.c to avoid filename collision. * Makefile.in: Cope with renaming. Wed Jan 3 13:09:04 1996 Fred Fish * symmisc.c (print_objfile_statistics): Print memory use statistics for objfile psymbol, symbol, and type obstacks. Tue Jan 2 13:41:14 1996 Stan Shebs * config/mips/nm-irix5.h: Restore. (TARGET_HAS_HARDWARE_WATCHPOINTS, etc): Define as for Irix 4; from Lee Iverson . * config/mips/irix5.mh (NAT_FILE): Use nm-irix5.h. * config/mips/irix[345].mh (MUNCH_DEFINE): Remove. For older changes see ChangeLog-95 Local Variables: mode: indented-text left-margin: 8 fill-column: 74 version-control: never End: