Thu Mar 23 15:07:08 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * breakpoint.c (bpstat_do_actions): For each element in the bpstat chain, do all the commands regardless of whether they run the inferior. Wed Mar 22 19:17:06 1995 Doug Evans * mem-break.c (LITTLE_BREAKPOINT, BIG_BREAKPOINT): Define as BREAKPOINT if mono-endian. (break_insn): Deleted. (big_break_insn, little_break_insn): Define. (memory_insert_breakpoint): Handle bi-endian cpus. (BREAKPOINT_LEN): Define. (memory_remove_breakpoint): Use it. (memory_breakpoint_size): Likewise. Tue Mar 21 17:03:17 1995 Kung Hsu * sparc-stub.c: add nop after 'bg good_wim'. * sparcl-stub.c: ditto. Tue Mar 21 13:34:12 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * infrun.c (handle_command): Don't print TARGET_SIGNAL_0, TARGET_SIGNAL_UNKNOWN, or TARGET_SIGNAL_DEFAULT. Mon Mar 20 10:09:59 1995 Jeff Law (law@snake.cs.utah.edu) * hppab-nat.c (store_inferior_registers): Sync with HPUX version. Mon Mar 20 07:34:48 1995 Stu Grossman (grossman@cygnus.com) * hppah-nat.c (store_inferior_registers): Move check for CANNOT_STORE_REGISTER to a better place. Fixes ptrace I/O errors found by test suite during function calls, which attempts to write unwritable registers. Sat Mar 18 02:02:24 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * mdebugread.c (parse_symbol): If finishing a function without known parameter type info, set that from parameter symbols. Remove commented-out add_param_to_type support. Thu Mar 16 16:38:03 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * xcoffread.c (process_linenos): Make sure filename we pass to start_subfile will cause deduce_language_from_filename to return the correct thing. Reindent function to GNU standards. Thu Mar 16 15:54:00 1995 J.T. Conklin * nlm/gdbserve.c (handle_exception): #if out call to StopBell, as it is not available on NetWare 3 or PIN. * nlm/ppc.c (StopBell): Removed. Thu Mar 16 12:14:41 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * xcoffread.c (read_xcoff_symtab): When creating a dummy parameter inferred from the traceback tags, give its type the name "". * stabsread.c (rs6000_builtin_type): Recognize types -31 to -34. Wed Mar 15 15:09:29 1995 Stu Grossman (grossman@cygnus.com) * findvar.c (read_register_bytes write_register_bytes): Make these routines much smarter about updating registers from the target, only doing so when absolutely necessary. This really speeds up register modification on some remote targets. * monitor.c: More cleanups. Get rid of monitor_load_ascii_srec. BFD makes this unnecessary. Lots of debugging speedups. * (expect): NULL terminate return string. * (monitor_open monitor_supply_register parse_register_dump monitor_wait monitor_fetch_register): Switch to using GNU regexp library to parse multi-register displays. * (monitor_read_memory): Read multiple bytes (up to 16) at once. * (monitor_create_inferior): Call clear_proceed_status to make run command notice first breakpoint. * (monitor_load): Clean up. Reset inferior_pid, set pc to start address and reset symbol table stuff to make loads put things into a fresh state. * (monitor_load_srec): Lower sleep time to 1 second. * monitor.h (struct monitor_ops): Add register_pattern and supply_register to monitor_ops. * rom68k-rom.c: Add new support for handling register dumps. * config/m68k/tm-m68k.h: Define D0_REGNUM and A0_REGNUM for register dump handling. Wed Mar 15 15:18:27 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * utils.c, defs.h (putchar_unfiltered, fputc_unfiltered): Make argument be an int, not a char. Using a prototype followed by an old-style function definition in a case where an argument is widened is a GCC-ism not supported by the native AIX compiler. Wed Mar 15 12:22:35 1995 J.T. Conklin * nlmstub.def: Removed, this was moved to nlm/gdbserve.def long ago. * configure.in (alpha-*-netware*): Removed configuration. * config/alpha/{alpha-nw.mt, gdbserve.mt, tm-alphanw.h}: Removed. * nlm/{README-ALPHA-NETWARE, aio.h, alpha-io.S, alpha-regdef.h, alpha.c, alpha.h, altdebug.h}: Removed. * nlm/gdbserve.c (main): Add support for processing BOARD= argument, deprecate NODE=. Wed Mar 15 10:58:26 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * c-exp.y (yylex): Make an empty character constant an error. Tue Mar 14 15:00:54 1995 Per Bothner * valops.c (value_arg_coerce): Do possible value_coerce_array before determining type argument to value_cast. Tue Mar 14 10:41:41 1995 Kung Hsu * remote-es.c: Replace ignore with 0. Tue Mar 14 05:52:36 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * valops.c (value_repeat), eval.c (evaluate_subexp_standard): If VALUE_REPEATED is already set, just error out. * valops.c (value_cast, value_slice), parse.c (follow_types): Add FIXME-type-allocation comments. * gdbtypes.h (struct type): Fix comment about what units the TYPE_LENGTH is in. Mon Mar 13 18:27:25 1995 Stan Shebs * ch-valprint.c (annotate.h): Include. * eval.c (evaluate_subexp_standard): Remove unused variable. (calc_f77_array_dims): Add parens to expression. * f-exp.y (yylex): Add parens to expression, remove unused label. * f-lang.h (calc_f77_array_dims): Declare. * f-valprint.c (f_val_print): Remove unused variables. Mon Mar 13 15:25:47 1995 Jim Kingdon * alpha-tdep.c (find_proc_desc): If pdr.framereg field is -1, don't use the PDR, just examine prologues instead. start-sanitize-arc Fri Mar 10 16:13:18 1995 Kung Hsu * config/tm-arc.h: Change arc register names. end-sanitize-arc Fri Mar 10 02:49:40 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) Fix problems with infinite recursion when printing a class that contains a static instance of the class. * cp-valprint.c (dont_print_vb_obstack): Renamed from dont_print_obstack, made static. (dont_print_statmem_obstack): New obstack, controls printing of static member classes. (_initialize_cp_valprint): Initialize it. (cp_print_static_field): New function, handles printing of static members. (cp_print_value_fields): New parameter dont_print_statmem to handle recursive printing of static member classes, use cp_print_static_field to handle printing of static members. * c-valprint.c (cp_print_value_fields): Update prototype and call to include additional dont_print_statmem parameter. * c-valprint.c, f-valprint.c (dont_print_obstack): Remove unused extern declaration. * alpha-tdep.c, findvar.c, infptrace.c: Include . * config/alpha/tm-alpha.h (FRAME_FIND_SAVED_REGS): Call alpha_find_saved_regs if fi->saved_regs is still NULL. * elfread.c (elf_symtab_read): Ensure that the filename field of a minsym is nonempty. Ignore solib trampoline symbols from the main symbol table, they might have a bogus value. * procfs.c (set_proc_siginfo), config/alpha/alpha-osf2.mh: Fix typos in comments. Thu Mar 9 17:19:47 1995 Jim Kingdon * mdebugread.c (parse_symbol, psymtab_to_symtab_1): Initialize pdr.framereg field of MIPS_EFI_SYMBOL_NAME symbol to -1. That way we know whether the PDR ever got set. * mips-tdep.c (find_proc_desc): If pdr.framereg field is -1, don't use the PDR, just examine prologues instead. Wed Mar 8 23:35:10 1995 Jeff Law (law@snake.cs.utah.edu) * somsolib.c (som_solib_section_offsets): Get offset of text section right. Wed Mar 8 16:12:21 1995 Stu Grossman (grossman@cygnus.com) start-sanitize-gdbtk * gdbtk.c (gdb_get_breakpoint_info): Return error if breakpoint type is not bp_breakpoint. end-sanitize-gdbtk * source.c (forward_search_command reverse_search_command): Set convenience variable $_ to be the line # of the match. * symtab.c (decode_line_1): Allow convenience variables to be used in line specs (for breakpoints and such). Wed Mar 8 12:51:00 1995 Stan Shebs * Makefile.in (VERSION): Bump to 4.14.1. * NEWS, README: Update for 4.14. * i386v-nat.c (i386_insert_aligned_watchpoint): Fix declaration. (i386_insert_nonaligned_watchpoint): Call aligned instead of generic watchpoint insertion. Tue Mar 7 19:26:10 1995 Per Bothner * valops.c (value_slice): Do COERCE_VARYING_ARRAY. Tue Mar 7 00:23:47 1995 Stu Grossman (grossman@cygnus.com) * monitor.c, array-rom.c, monitor.h, rom68k-rom.c: Move target_ops into monitor.c. * monitor.c (monitor_create_inferior): Allow run command to start program. * monitor.c (monitor_load): Set PC to start address when done loading. * array-rom.c, monitor.h, rom68k-rom.c: Clean up target_ops. Remove ref to monitor_create_inferior. * monitor.c: More general cleanups. Add prototypes, remove unused routines. Fix bug with wrong number of args to error(). * main.c (main): Don't start up GUI when running under gdb mode in emacs. * Makefile.in: Add rules for monitor.o and rom68k-rom.o to make Sun make (with VPATH) work... * monitor.c, monitor.h, rom68k-rom.c: Serious cleanup to make IDP (rom68k) target work right. * array-rom.c, op50-rom.c, w89k-rom.c: Partial updates to new monitor.c interface. More work needs to be done here. * config/m68k/tm-monitor.h: Change DECR_PC_AFTER_BREAK to 0 to match the IDP monitor. Also, set NUM_REGS to 18 cuz there's no floating-point for this card. * serial.h, ser-go32.c, ser-go32-para.c, ser-mac.c, ser-tcp.c, ser-unix.c: Add SERIAL_SETSTOPBITS to set the number of stopbits (needed for IDP board?!?!?). * defs.h, utils.c, remote-hms.c, remote-pa.c, remote.c: Fix defs and usage of fputc_unfiltered and putchar_unfiltered. Eliminate putc_unfiltered (it's superfluous). * command.h, command.c, top.c: Add var_enum command type. It's like var_string but allows only only one of the specified strings. Mon Mar 6 15:03:59 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * valops.c (value_cast): Don't use backslash newline--pre-ANSI compilers (such as SunOS4 /bin/cc) don't generally support it except in some contexts. Fri Mar 3 17:42:48 1995 Per Bothner * valops.c (value_cast): Check for cast to array type *before* we coerce array to pointer (in case arg2 is already array). * valops.c (call_function_by_hand): Set using_gcc to 2 if using gcc2. Needed for REG_STRUCT_HAS_ADDR to work on sparc. Also check REG_STRUCT_HAS_ADDR for union, array and string types. * valops.c (call_function_by_hand): Re-arrange code for pushing paramaters on the stack so we can do better STACK_ALIGN. * valops.c (call_function_by_hand): Call error if the number of arguments is fewer than parameter types in function type. Fri Mar 3 17:13:05 1995 Doug Evans * sparc-tdep.c (sparc_extract_struct_value_address): Move sparc64 support to here. (sparc64_extract_struct_value_address): Deleted. (dump_ccreg): Add a prototype so long long arg -> int. * sparc/tm-sp64.h (USE_STRUCT_CONVENTION): Define. (EXTRACT_STRUCT_VALUE_ADDRESS): Delete. Fri Mar 3 15:12:12 1995 Jeff Law (law@snake.cs.utah.edu) * hpread.c (hpread_record_lines): New argument "offset". All callers changed. Use it to handle dynamic address relocation. (hpread_build_psymtabs): Adjust texthigh as we read each function debug symbol. Fix computation of texthigh. (hpread_read_subrange_type): Work around macro bugs in HP's compilers. (hpread_process_one_debug_symbol): Correctly map source lines. * somread.c (check_strange_names): Filter names emitted by the HP compiler when generating PIC code. * valops.c (value_struct_elt_for_reference): Work around macro bugs in HP's compilers. * c-exp.y (block): Likewise. Fri Mar 3 12:27:28 1995 Jim Kingdon * rs6000-tdep.c (push_dummy_frame): Fix order of arguments to store_address. * utils.c [_AIX]: Include stddef.h instead of #defining size_t. Fri Mar 3 12:33:24 1995 Michael Meissner * rs6000-tdep.c (skip_prologue): Skip multiple stores of the saved registers that GCC emits on the PowerPC by default in addition to the store multiple instruction used on the Power series. Fri Mar 3 00:54:58 1995 Doug Evans * sparc-tdep.c (decode_asi): New function. (sparc_print_register_hook): Pretty print more v9 registers. * sparc/tm-sp64.h (REGISTER_NAMES): Fix some typos. Thu Mar 2 22:20:22 1995 Doug Evans * dwarfread.c (struct dieinfo): Use CORE_ADDR for at_{low,high}_pc. (target_to_host): Change result type to CORE_ADDR. Thu Mar 2 15:13:04 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * rs6000-tdep.c: Fix byte-swapping sins. Thu Mar 2 16:48:45 1995 Michael Meissner * rs6000-tdep.c (branch_dest): Minor code cleanup, don't share code between branch unconditional and branch conditional cases. Wed Mar 1 09:41:26 1995 Doug Evans Various changes for sparc64. * sparc-tdep.c (NUM_SPARC_FPREGS): Define. (SPARC_INTREG_SIZE): Define. (*): Use SPARC_INTREG_SIZE instead of REGISTER_RAW_SIZE (intreg) where appropriate. (enum branch_type): New value `done_retry'. (isbranch): Renamed from isannulled. All callers changed. Support new sparc64 branch insns. (single_step): Handle done_retry. (sparc_extract_struct_value_address): Don't assume 4 byte regs. (get_saved_register): Likewise. (sparc_push_dummy_frame): Likewise. (sparc_frame_find_saved_regs): Likewise. (sparc_pop_frame): Likewise. Don't refer to FPS_REGNUM, CPS_REGNUM, or PS_REGNUM if not sparc64. sparc64 has 64 fp regs. (sparc64_extract_struct_value_address): New function. (dump_ccreg, sparc_print_register_hook): Likewise. * sp64-tdep.c: Deleted. * sparc/tm-sp64.h (GDB_TARGET_IS_SPARC64): Define. (NUM_REGS): Reduce by 2, cle/tle are in the pstate reg. (CC_HAS_LONG_LONG): Define. (REGISTER_NAMES): Delete cle/tle and reorganize. (PS_REGNUM, FPS_REGNUM, CPS_REGNUM): Delete, they're ifdef'd out of sparc-tdep.c now. (REGISTER_BYTES): Update. (REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Delete. (EXTRACT_RETURN_VALUE): Delete. Use definition in tm-sparc.h. (NO_SINGLE_STEP): Likewise. * sparc/tm-sparc.h (EXTRACT_VALUE_RETURN): Don't assume 4 byte regs. * sparc/sp64.mt: Move simulator support ... * sparc/sp64sim.mt: ... to here. Wed Mar 1 13:14:42 1995 Kung Hsu * remote-vx960.c: new file for target specific register packaging. * remote-vx68.c: ditto. * config/i960/vxworks960.mt: add remote-vx960.o. * config/m68k/vxworks68.mt: add remote-vx68.o. Wed Mar 1 13:42:49 1995 Michael Meissner * remote.c (remote_wait): Make calls to strtol be type correct by passing the address of a char * pointer instead of an unsigned char *. * rs6000-tdep.c (push_dummy_frame): Cast sp to char * when calling write_memory to make things type correct. Wed Mar 1 12:17:31 1995 Michael Meissner * ch-exp.y, c-exp.y, f-exp.y, m2-exp.y (yy defines): Support the standard Linux yacc by adding more names to be redefined with a prefix. Tue Feb 28 22:55:47 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * hppa-tdep.c (pa_print_registers), monitor.c: Use extract_unsigned_integer and friends, not SWAP_TARGET_AND_HOST. * defs.h, findvar.c: Move SWAP_TARGET_AND_HOST back to findvar.c. Rename it to SWAP_FLOATING to make it clear it is no longer for integers. Tue Feb 28 14:38:39 1995 Kung Hsu * defs.h (SWAP_TARGET_AND_HOST): check endianess at runtime not compile time. start-sanitize-arc * arc-tdep.c (_initialize_arc_tdep): set tm_print_insn according to processor. * remote-arc.c (arc_wait): when a processor stops, stop other two processors too. * remote-arc.c (switch_command): switch tm_print_insn. end-sanitize-arc * vx-share/ptrace.h: merge in WRS new ptrace requests. * defs.h: fix a syntax error. * a29k-tdep.c (get_longjmp_target): add this function, from WRS. * remote-vx.c: move read_register and write_register out to target specific files. * remote-vx29k.c (get_fp_contnets): add this function, from WRS. * defs.h: define SWAP_TARGET_AND_HOST macro. * findvar.c, monitor.c, hppa-tdep.c: remove definition of SWAP_TARGET_AND_HOST. Tue Feb 28 08:31:40 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * alpha-tdep.c (find_proc_desc): Only attempt to set PROC_LOCALOFF (found_heuristic) if found_heuristic is non-NULL. Mon Feb 27 11:56:32 1995 Stan Shebs * monitor.c: General gcc -Wall lint cleanup and reformat. (monitor_command): If no args, send an empty command. Thu Feb 23 21:07:25 1995 Stu Grossman (grossman@cygnus.com) * monitor.c (monitor_load_ascii_srec): Add a one second sleep after send LOAD_CMD to prevent loss of first S-record. Tue Feb 21 20:48:42 1995 Per Bothner * valops.c (call_function_by_hand): Set using_gcc to 2 if gcc-2. Call error if too few arguments. If REG_STRUCT_HAS_ADDR (structs passed by invisible reference), copy and convert to reference *before* we calculate alignment. Also, make sure structs allocated for return values and invisible reference don't violate STACK_ALIGN. Tue Feb 21 23:29:59 1995 Per Bothner * ch-exp.y (expression_conversion): Recognize 'ARRAY () TYPE (EXPR)' (same as C's '(TYPE[])EXPR') Tue Feb 21 11:47:26 1995 Stan Shebs * top.c (print_gdb_version): Update the year. Sun Feb 19 14:31:57 1995 Jim Kingdon * Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Look for newlib in `..' not in `../..'. Sun Feb 19 11:05:28 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * procfs.c (unconditionally_kill_inferior): Don't issue a PIOCKILL in addition to a PIOCSSIG to kill the inferior. Thu Feb 16 15:06:12 1995 Per Bothner * parse.c (follow_types): Given (TYPE[]) (i.e. with no length), create a 0-length array type, and set BOUND_CANNOT_BE_DETERMINED. * valops.c (value_cast): If a cast like (TYPE[])VALUE (i.e. array of unknown length) use sizeof(VALUE)/sizeof(TYPE) as the length. * c-typeprint.c (c_type_print_varspec_suffix): If array length is 0, print it, but not if upper_bound is BOUND_CANNOT_BE_DETERMINED. Thu Feb 16 16:06:50 1995 Michael Meissner * dcache.c (insque, remque): Rewrite Linux support. Wed Feb 15 12:33:20 1995 Michael Meissner * config/powerpc/tm-ppc-eabi.h (TEXT_SEGMENT_BASE): Define as 1. * dcache.c (insque, remque): If compiling in standard C on Linux, protect insque and remque with macros to cast the pointer arguments to the proper type. Tue Feb 14 17:16:41 1995 Stu Grossman (grossman@cygnus.com) * annotate.c, breakpoint.c, defs.h, top.c: Replace enable/disable_breakpoint_hook with modify_breakpoint_hook. start-sanitize-gdbtk * gdbtk.c: Ditto. * gdbtk.c: General cleanups, get rid of unused variables. Redo handling of stdout/stderr to just return output as the result of the tcl command that caused the output. Cleanup -Wall stuff. * (breakpoint_notify): Now returns just action and breakpoint number. * (gdb_get_breakpoint_list): New routine. Does the obvious. * (gdb_get_breakpoint_info): Mostly derived from the old breakpoint_notify, but returns lots more info. * (dsprintf_append_element): Helper routine, works like printf, but appends a tcl element onto the specified DString. Good for building up lists as return values. * (gdbtk_enable/disable_breakpoint): Go away. Replaced with gdbtk_modify_breakpoint. * (*many routines*): Use new result protocol. * (call_wrapper): Make sure that recursive calls don't trash results. * gdbtk.tcl: New windows, autocmd, and breakpoints. * (gdbtk_tcl_fputs): Don't use $current_output_win redirection anymore. It's not needed (in fact, this routine may not be needed anymore). * (gdbtk_tcl_breakpoint): Change to reflect new breakpoint notification protocol. * (gdbtk_tcl_busy gdbtk_tcl_idle): Straighten out buttons, remove catches. * (interactive_cmd): Use this wrapper around button invocations of many commands. This will catch errors and put the results into the command window. It also updates all the other windows. * Also, change reliefs of most things to sunken. This actually looks better. * (create_file_win): Fix margin binding to allow breakpoints to work again. * (create_asm_win): Use return value of gdb_disassemble instead of implicit I/O to the command window. * (create_command_window): Use new result protocol to get output from commands. end-sanitize-gdbtk Tue Feb 14 16:58:07 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * expression.h: Move declaration of evaluate_subexp_with_coercion from here... * value.h: ...to here. * expression.h: Don't include value.h Tue Feb 14 11:46:07 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * expression.h: Move include of value.h until after declaration of enum exp_opcode. Sun Feb 12 13:47:30 1995 Stan Shebs * remote-e7000.c: Comprehensive cleanup; removal of dead code, simplify code, declare things, format to standards. (inferior.h, value.h, command.h, remote-utils.h): Include. (e7000_login): Rename to e7000_login_command. (e7000_ftp): Rename to e7000_ftp_command. (e7000_drain): Rename to e7000_drain_command. * irix5-nat.c (string.h): Include near beginning of file. Sun Feb 12 12:36:38 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * valops.c (value_arg_coerce): Use VALUE_TYPE not SYMBOL_TYPE on arg, it is a value not a symbol. gcc -Wall lint: * eval.c: Move declaration of evaluate_subexp_with_coercion from here.. * expression.h: ..to here. * expression.h: Include value.h. * ch-lang.c (evaluate_subexp_chill): Add default case in switch. Sun Feb 12 11:03:47 1995 Per Bothner * language.h (struct language_defn): New field evaluate_exp. * c-lang.c (c_language_defn, cplus_language_defn, asm_langauge_defn), f-lang.c (f_language_defn), language.c (unknown_language_defn, auto_language_defn, local_language_defn), m2-lang.c (m2_language_defn): Set evaluate_exp to evaluate_subexp_standard. * ch-lang.c (evaluate_subexp_chill): New function. Chill-specific support for MULTI_SUBSCRIPT. (chill_language_defn): Set evaluate_exp to evaluate_subexp_chill. * eval.c (enum noside): Move from here .... * expression.h (enum noside): ... to here. (evaluate_subexp_standard): New prototype. * eval.c (evaluate_subexp): Renamed to evaluate_subexp_standard. Removed lo-longer-needed test for chill_varying_type. (evaluate_subexp): New. Calls exp->language_defn->evaluate_exp. * ch-exp.y (maybe_expression_list): New non-terminal. (primitive_value): Allow empty parameter list. Sun Feb 12 10:02:16 1995 Per Bothner * buildsym.c (finish_block): If finishing a function without known parameter type info, set that from parameter symbols. * c-typeprint.c (c_type_print_varspec_suffix): For TYPE_CODE_FUNC, print parameter types, if available. * ch-typeprint.c (chill_type_print_base): Likewise. * gdbtypes.h (struct type): Remove function type field. (TYPE_FUNCTION_TYPE): Remove macro. We can't as simply re-use function types now that we're also storing parameter types. And the payoff is much less. * gdbtypes.c (make_function_type): Don't use/set TYPE_FUNCTION_TYPE. (recursive_dump_type): Don't print TYPE_FUNCTION_TYPE. * dwarfread.c (read_subroutine_type): Don't set TYPE_FUNCTION_TYPE. * valops.c (value_arg_coerce): Now takes param_type argument. (call_function_by_hand): Convert arguments with value_arg_coerce early, and overwrite original args with converted args. No longer need multiple calls to value_arg_coerce. (value_arg_push): Removed. * hppa-tdep.c (hppa_push_arguments): No longer call value_arg_coerce. * mips-tdep.c (mips_push_arguments): Likewise. * alpha-tdep.c (alpha_push_arguments): Likewise. * rs6000-tdep.c (push_arguments, ran_out_of_registers_for_arguments): Likewise. * value.h (value_arg_coerce): Remove declaration. (It's now static.) * valops.c (value_cast): Do COERCE_VARYING_ARRAY after COERCE_REF. * symtab.c (add_param_to_type): Remove (commented-out) function, since that functionality has been re-written. * coffread.c: Remove commented-out add_param_to_type support. * mdebugread.c (parse_symbol): Likewise. * stabsread.c (define_symbol): Likewise. Sun Feb 12 09:03:47 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * buildsym.c (start_subfile): Set language for f2c like for cfront. Thu Feb 9 20:20:11 1995 Rob Savoye * op50n-rom.c: Add the control registers. Thu Feb 9 15:46:39 1995 Stan Shebs * Makefile.in (CLIBS): Add $(LIBIBERTY) before, in addition to after, any host/target/native libraries. * dcache.c (insque, remque): Remove declarations. * gdbtypes.h (type_code): Remove trailing comma. From Peter Schauer: * xcoffread.c (read_xcoff_symtab) [C_HIDEXT]: Move #ifdef STATIC_NODEBUG_VARS inside case. Thu Feb 9 07:43:41 1995 Jim Kingdon * config/sparc/tm-sun4sol2.h: Define STATIC_TRANSFORM_NAME. * partial-stab.h: Call it. * stabsread.c (define_symbol) [STATIC_TRANSFORM_NAME]: Call STATIC_TRANSFORM_NAME to get the name and use minimal symbols to get the address. * sparc-tdep.c (solaris_static_transform_name): New function. Thu Feb 9 12:09:09 1995 Jeff Law (law@snake.cs.utah.edu) * somread.c (som_symtab_read): Handle dynamic relocation for both text and data symbols. (som_symfile_offsets): If objfile is a shared library, then get text and data offsets from the shared library structures. * somsolib.c (som_solib_add): Copy the bfd pointer from the objfile rather than reopening the file again. (som_solib_section_offsets): New function. * somsolib.h (som_solib_section_offsets): Declare. Wed Feb 8 20:32:18 1995 Jim Kingdon * config/sparc/tm-sun4sol2.h, dbxread.c: Rename N_SO_ADDRESS_MAYBE_MISSING to SOFUN_ADDRESS_MAYBE_MISSING. * symtab.h (minimal_symbol) [SOFUN_ADDRESS_MAYBE_MISSING]: Add filename field. * elfread.c (record_minimal_symbol_and_info), minsyms.c, symtab.h (prim_record_minimal_symbol_and_info): Return newly created symbol. * elfread.c (elf_symtab_read) [SOFUN_ADDRESS_MAYBE_MISSING]: Set filename field of minimal symbol. * symmisc.c (dump_msymbols) [SOFUN_ADDRESS_MAYBE_MISSING]: Print filename field. * minsyms.c, symtab.h (lookup_minimal_symbol): New arg sfile. * symm-tdep.c, somsolib.c, hppa-tdep.c, c-exp.y, f-exp.y, m2-exp.y, nindy-tdep.c, m3-nat.c, irix5-nat.c, hpread.c, os9kread.c, breakpoint.c, alpha-tdep.c, valops.c, symtab.c, printcmd.c, dbxread.c: Change callers to pass NULL for sfile. * dbxread.c (process_one_symbol) [SOFUN_ADDRESS_MAYBE_MISSING]: Find address of function from minimal symbols. * partial-stab.h, case 'f', 'F': Call find_stab_function_addr instead of getting pst->textlow from the stab. * minsyms.c (find_stab_function_addr): New function. Wed Feb 8 19:19:56 1995 Rob Savoye * monitor.c: Fix so all the output shows up in the GUI command window. Mon Feb 6 18:50:59 1995 Stan Shebs * i386-tdep.c (_initialize_i386_tdep): Put void decl on separate line, so init.c generation works correctly. start-sanitize-arc * arc-tdep.c (_initialize_arc_tdep): Ditto. end-sanitize-arc Mon Feb 6 14:44:36 1995 Rob Savoye * config/mips/idt.mt: Add support for the lsi33k target. * config/sparc/sun4sol2.mh: Add support for ser-tcp. * array-rom.c: Finish the rest of the support commands needed by GDB. * mips-tdep.c: Add LSI33k register names and processor type. start-sanitize-gdbtk Sun Feb 5 20:32:44 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * gdbtk.c (gdb_disassemble): Deference pointer to function before calling it (pre-ANSI compilers generally require this). end-sanitize-gdbtk Sat Feb 4 13:29:52 1995 Stan Shebs * config/m68k/est.mt (TDEPFILES): Remove m68k-pinsn.o. Fri Feb 3 16:47:31 1995 Kung Hsu * ser-go32-para.c (dos_read): fix syntax errors. Fri Feb 3 11:19:20 1995 Stu Grossman (grossman@cygnus.com) * core.c (dis_asm_read_memory), defs.h, top.c: Get rid of dis_asm_read_memory_hook. We can now call the disassemblers directly and have no need for this hook anymore. start-sanitize-gdbtk * gdbtk.c (gdb_disassemble): Ditto. end-sanitize-gdbtk * defs.h, printcmd.c: Make print_insn be static. * ser-go32.c (dos_comisr): Make this 8 bit clean. * (dos_open dos_close): Allow multiple opens to the same device. Use a ref count to prevent unwanted deallocations. * sparcl-tdep.c: Put #ifdefs around all socket stuff to make GO32 happy. * (sparclite_ops): Switch to download_stratum. * target.h (enum strata): Move download_stratum before process_stratum so that executable targets get pushed on top of download targets. Thu Feb 2 19:02:45 1995 Rob Savoye * array-rom.c: Remove the non GDB remote protocol config stuff. * monitor.c: All reading/writing functions for memory and registers work. Thu Feb 2 16:11:04 1995 Kung Hsu start-sanitize-arc * config/arc/arc.mt: new target makefile for arc processor. * config/arc/tm-arc.h: new target header for arc processor. * config/arc/go32.mh: new go32 host makefile for arc processor. * config/arc/xm-go32.h: new go32 host header for arc processor. * arc-tdep.c: new target dependent codes for arc processor. * remote-arc.c: new file for arc-specific protocol through parallel line. end-sanitize-arc * ser-go32-para.c: new file for go32 parallel port communication. Thu Feb 2 13:58:40 1995 Stan Shebs * Makefile.in (VERSION): Bump to 4.13.2. Thu Feb 2 07:27:56 1995 Jim Kingdon (kingdon@lioth.cygnus.com) Fix compiler warnings: * remote-e7000.c (printf_e7000debug): Rename to puts_e7000debug and have the caller do the sprintf. Saves us from varargs hell. (normal): Define before use. * remote-e7000.c: Reindent a few things. Wed Feb 1 21:16:42 1995 Per Bothner * f-typeprint.c (f_type_print_varspec_suffix): Print array index ranges in reverse order. * f-valprint.c (f77_create_arrayprint_offset_tbl): Fix calculation. * eval.c (evaluate_subscript): Don't call value_subscript, since it adjusts for lower bound and enforces ranges. * expression.h (exp_code): Remove MULTI_F77_SUBSCRIPT, OP_F77_SUBSTR. * eval.c, parse.c: Removed uses of removed opcodes. * eval.c (evaluate_subexp): Clean up handling of OP_UNDETERMINED_ARGLIST (no backtracking, more general). * f-valprint.c (f_val_print): Print TYPE_CODE_STRING using LA_PRINT_STRING, and not val_print_string (which reads from inferior). * ch-lang.c (chill_is_varying_struct), ch-lang.h: Remve function duplicate function made redundant by chill_varying_type. Re-write of f77 string and complex number support: * language.h (struct language_defn): New fields string_lower_bound and string_char_type. * c-lang.c (c_language_defn, cplus_language_defn, asm_language_defn), language.c (unknown_language_defn, auto_language_defn, local_language_defn), m2-lang.c (m2_language_defn), f-lang.c (f_language_defn), ch-lang.c (chill_language_defn): Set new fields. * gdbtypes.c (create_string_type): Use new string_char_type field. * valops.c (value_string): Use new string_lower_bound field. * defs.h (TARGET_COMPLEX_BIT, TARGET_DOUBLE_COMPLEX_BIT): Removed. * f-lang.c (f_create_fundamental_type, _initialize_f_language), m2-lang.c (m2_create_fundamental_type), gdbtypes.c (_initialize_gdbtypes): Set TYPE_TARGET_TYPE of complex types. Set their TYPE_CODEs to TYPE_CODE_COMPLEX. * mdebugread.c (mdebug_type_complex, mdebug_type_double_complex): Removed. Use builtin_type_complex and builtin_type_double_complex. * gdbtypes.h (enum type_code): Removed TYPE_CODE_LITERAL_STRING and TYPE_CODE_LITERAL_COMPLEX. * c-typeprint.c, f-typeprint.c, f-valprint.c, eval.c: Removed uses of TYPE_CODE_LITERAL_STRING and TYPE_CODE_LITERAL_COMPLEX. * gdbtypes.c, gdbtypes.h (f77_create_literal_complex_type, f77_create_literal_string_type): Removed. * value.h (VALUE_LITERAL_DATA, VALUE_SUBSTRING_MEMADDR, VALUE_SUBSTRING_MYADDR): Removed. * expression.h (enum exp_opcode): Rename OP_F77_LITERAL_COMPLEX to OP_COMPLEX. * parse.c: Update accordingly. * f-valprint.c (f77_print_cmplx): Removed. (f_val_print case TYPE_CODE_COMPLEX): Re-write to use print_floating. * f-exp.y (STRING_LITERAL): Use OP_STRING instead of OP_ARRAY. * eval.c (evaluate_subexp): For case OP_ARRAY, don't call f77_value_literal_string. * valops.c, value.h (f77_value_literal_string, f77_value_substring, f77_assign_from_literal_string, f77_assign_from_literal_complex): Removed. (value_assign): No longer need to handle literal types. * valops.c (f77_value_literal_complex), value.h: Re-written and renamed to value_literal_complex. Last arg is now a (complex) type. * valops.c (f77_cast_into_complex): Re-written and renamed to cast_into_complex. * eval.c (evaluate_subexp): Update accordingly. * ch-valprint.c (chill_val_print): On TYPE_CODE_STRING, don't print address for non-'s'-formats. * ch-typeprint.c, ch-valprint.c: Use chill_varying_type instead of chill_is_varying_struct. Wed Feb 1 13:27:33 1995 Stan Shebs gcc -Wall lint. * alpha-tdep.c (alpha_in_lenient_prologue): Comment out. (after_prologue): Remove unused local b. * procfs.c (thread.h): Include. (pr_flag_table, pr_why_table, faults_table, siginfo_table): Use nested braces in initializer. * top.c (initialize_targets, initialize_utils): Declare. (locate_arg, insert_args): Add parens around tested assignments. * remote-utils.c (sr_scan_args): Remove decl of strtol. * remote.c (thread.h): Include. (remote_wait): Remove unused local p2. * sparc-tdep.c (fill_gregset, fill_fpregset): Remove decls of registers array. defs.h (stdlib.h): Include. (exit, perror, atoi, qsort, memcpy, memcmp): Don't declare. (fclose, atof, malloc, realloc, free, strchr, strrchr, strstr, strtok, strerror): Don't specify parameter types in declaration. Wed Feb 1 12:23:57 1995 Per Bothner * ch-exp.y (value_string_element, string_primitive_value, start_element, left_element, right_element, slice_size, lower_element, upper_element, first_element): Removed. (value_string_slice, value_array_slice): Replaced by ... (slice): New non-terminal, with working slice support. (primitive_value_lparen, rparen): New non-terminals. (maybe_tuple_elements): New non-terminal, to allow empty tuples. (idtokentab): Added "up". * value.h (COERCE_VARYING_ARRAY): New macro. * valarith.c (value_subscript): Use it. * valops.c (value_cast): Likewise. Also, do nothing if already correct type, and allow converting from/to range to/from scalar. * valops.c, value.h (varying_to_slice, value_slice): New functions. * eval.c (OP_ARRAY): Add cast for array element. * expression.h (TERNOP_SLICE, TERNOP_SLICE_COUNT): New exp_opcodes. * valops.c (chill_varying_type): Moved function frp, here ... * gdbtypes.c (chill_varying_type), gdbtypes.h: ... to here. * parse.c (length_of_subexp, prefixify_subexp): Add support for TERNOP_SLICE, TERNOP_SLICE_COUNT. * expprint.c (print_subexp, dump_expression): Likewise. * eval.c (evaluate_subexp): Likewise. * eval.c (evaluate_subexp case MULTI_SUBSCRIPT): Don't call value_x_binop on a Chill varying string. Tue Jan 31 13:51:53 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * config/m68k/monitor.mt, config/pa/{hppabsd.mt,hppahpux.mt,hppaosf.mt,hppapro.mt}: Put depfiles in TDEPFILES not REMOTE_O. Tue Jan 31 11:14:44 1995 Steve Chamberlain From nigel@algor.co.uk. * ser-go32.c (dos_close): Don't crash if scb null. (dos_sendbreak): New function. (dos_ops): Point to dos_sendbreak. (dos_info): Calculate COM number correctly. Tue Jan 31 09:40:11 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * xcoffread.c (process_xcoff_symbol): Use new variables func_symbol_type and var_symbol_type as type of functions and variables which don't have any stabs associated with them. Reindent most of function. (_initialize_xcoffread): Initialize *_symbol_type. * xcoffread.c (read_xcoff_symtab): Reindent most of function. Put C_HIDEXT symbols in the minimal symbols, rather than ignoring them (this part commented out as I didn't quite get it to work). (cs_to_section, find_targ_sec): New functions, to support above code. * xcoffread.c (RECORD_MINIMAL_SYMBOL): Only skip '.' if it is actually present. Mon Jan 30 17:34:24 1995 Stu Grossman (grossman@cygnus.com) start-sanitize-gdbtk * gdbtk.tcl (create_file_win): Disable old popup menu for source window. end-sanitize-gdbtk * sparcl-tdep.c: Add `sparclite' target for doing serial and udp downloads to SPARClite demo boards. Sun Jan 29 09:43:22 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * remote.c, remote-pa.c: Remove #if 0'd icache code. It has had no hope of working as is for a long time (in particular, shebs' 27 Jan 95 change confuses the issue further--target_read_memory and xfer_core_file do *not* do the same thing in this context). Revise comment. Sat Jan 28 13:40:46 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * elfread.c (elf_symtab_read): Do not test BSF_GLOBAL for procedure linkage table symbols, it is no longer set due to the Jan 6 BFD change in bfd/elfcode.h. Fri Jan 27 17:08:06 1995 Stan Shebs * top.c (use_windows): Clarify comments. * convex-tdep.c (xfer_core_file): Comment out. * config/convex/tm-convex.h (XFER_CORE_FILE): Remove. * remote.c, remote-pa.c (remote_fetch_word): Change xfer_core_file references to target_read_memory. * gdbcore.h (xfer_core_file, core_open, core_detach): Remove declarations. * corelow.c (core_open, core_detach): Make static. * arm-tdep.c: Make it compile. (exec_file_command, xfer_core_file): Comment out. (arm_print_insn): Remove, now in libopcodes. (skip_prologue): Comment out most of body. (arm_frame_find_saved_regs): Move here from tm-arm.h. (_initialize_arm_tdep): Set tm_print_insn. * config/arm/tm-arm.h: Remove old refs to first_object_file_end. (XFER_CORE_FILE): Remove. (FRAME_FIND_SAVED_REGS): Call arm_frame_find_saved_regs. Fri Jan 27 08:48:28 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * Makefile.in (CHILL_LIB): Define as in testsuite/Makefile.in. Thu Jan 26 18:24:41 1995 Jim Kingdon * symtab.c (find_pc_line): When subtracting one to get a line number, make sure not to end up with zero. * remote-vx.c: Revert all of Kung's changes of 16 Jan. The problems with those changes were (a) the file didn't compile, (b) they changed memset to bzero--memset is correct, (c) they took out code to deal with boards lacking floating point, (d) who knows what I didn't discover in a quick read. Thu Jan 26 17:32:54 1995 Stu Grossman (grossman@cygnus.com) * sparcl-tdep.c: Clean up formatting and indentation. Thu Jan 26 10:49:59 1995 Steve Chamberlain * remote-hms.c (hms_ops): Change ref of hr_load_image to gr_load_image. (dcache_flush, dcache_hit, dcache_value, dcache_fetch, dcache_poke, dcache_init): Deleted. (hms_open, hms_resume, hms_fetch_word, hms_store_word): Use dcache routines provided by remote-util.h Thu Jan 26 12:08:31 1995 Michael Meissner * configure.in: Add support for powerpc-*-eabi. * powerpc/tm-ppc-eabi.h, powerpc/pcc-eabi.mt: New files for PowerPC support. Wed Jan 25 18:13:14 1995 Per Bothner * language.h (struct language_defn): New field c_style_arrays. * language.c (unknown_language_defn, auto_language_defn, local_language_defn), c-lang.c (c_language_defn, cplus_language_defn, asm_language_defn): Set c_style_arrays to true. * m2-lang.c (m2_language_defn), ch-lang.c (chill_language_defn), f-lang.c (f_language_defn): Set c_style_arrays to false. * valops.c (value_string): If c_style_array is not set, allocate string in gdb (not inferior) using allocate_value. * value.h (COERCE_ARRAY), valops.c (value_addr, value_arg_coerce): Only call value_coerce_array if current_language->c_style_arrays. * values.c: Add #include "language.h". (Needed for COERCE_ARRAY.) * valops.c (chill_varying_type): New predicate. * valops.c (value_cast): Support assigning a fixed string or array to a variable string/array structure. * valarith.c (value_subscripted_rvalue): Extra parameter lowerbound. Check index>=lowerbound, and then add lowerbound to index here, instead of in caller. Generalize to arbitrary lval_types. (value_subscript): Use enhanced value_subscripted_rvalue if c_style_arrays is false (and index is in range). start-sanitize-gdbtk Wed Jan 25 18:23:46 1995 Stu Grossman (grossman@cygnus.com) * gdbtk.c (gdbtk_init): Prevent segfault when gdbtk.tcl can't be found. * gdbtk.tcl: Initialize expr_update_list() to prevent errors when popping up expression window for the first time. end-sanitize-gdbtk Wed Jan 25 18:13:14 1995 Per Bothner * eval.c (evaluate_subexp case OP_ARRAY): Fix calls to memset: TYPE_LENGTH is length in bytes, not bits. Wed Jan 25 08:19:35 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * infrun.c (proceed): Flush stdout before resuming inferior. * infcmd.c (step_1), annotate.c (annotate_starting): Don't bother to flush here. Wed Jan 25 01:11:21 1995 Jeff Law (law@snake.cs.utah.edu) * hpread.c (hpread_process_one_debug_symbol): Fix lines garbled by an ill-advised global search and replace. Tue Jan 24 12:10:28 1995 Stu Grossman (grossman@cygnus.com) * gdbtk.tcl (create_registers_window): Work around a radiobutton widget bug to make Options|Natural button work. * gdbtk.c (gdb_disassemble): Fix problem with source+assembly and g++ caused by out-of-order pc's. * gdbtk.tcl (files_command): Remove duplicate file names. Also, add scrollbar. Mon Jan 23 17:21:09 1995 Stu Grossman (grossman@cygnus.com) * gdbtk.tcl: Take .gdbtkinit if it exists. Makes gdbtk match the doc! Mon Jan 23 13:11:46 1995 Per Bothner Add support for Chill bitstring literals (e.h. H'FF00'). * ch-exp.y (match_bitstring_literal): Fix for proper endianness. * expprint.c (print_subexp): Don't call error on OP_BITSTRING, just print B''. * gdbtypes.c (create_set_type): Fix bug in length calculation. * valops.c, value.h (value_bitstring): New function. * eval.c (evaluate_subexp): Implement support for OP_BITSTRING. * ch-typeprint.c (chill_type_print_base): For TYPE_CODE_FUNC, check that return type is non-void, and print in proper Chill syntax. Mon Jan 23 12:20:34 1995 Rob Savoye * Makefile.in: Remove references to remote-mon.c. * remote-mon.c: remove. Replaced by rom68k-rom.c. * rom68k-rom.c: Support for Rom68k monitor. Mon Jan 23 10:50:57 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * Makefile.in (CHILL_FOR_TARGET): Update -L argument to point to gcc/ch/runtime not chillrt, since that is where the chill runtime lives now. Mon Jan 23 00:06:57 1995 Steve Chamberlain * remote-hms.c (hms_load): Delete. (target_ops): Use hr_load_image. * remote-e7000.c, remote-z8k.c, remote-nindy.c (target_ops): Define memory_insert/remove_breakpoint. * xm-go32.h: Remove redundant SIGs. Thu Jan 19 20:26:58 1995 Steve Chamberlain * ser-go32.c: Rewritten by nigel@algor.co.uk. Fri Jan 20 15:23:55 1995 Per Bothner * expression.h (OP_LABELED): New operator, for Chill labeled structre tuples. * ch-exp.y (tuple_element, named_record_element, tuple_elements): New non-terminals, to handle labeled structure tuples. (tuple): Re-define using tuple_elements. * eval.c (evaluate_labeled_field_init): New function, to handle initialization of structure fields, possibly using OP_LABELED. (evaluate_subexp): Use it. * expprint.c (print_subexp case): For OP_ARRAY, use Chill syntax for Chill. Handled OP_LABELED. * parse.c (length_of_subexp, prefixify_subexp): Handle OP_LABELED. * eval.c (evaluate_subexp): Handle Chill Powerset tuples. * valarith.c (value_bit_index): Just treat bitstring as represented by an array of bytes. Alignment is handled by compiler. Wed Jan 18 19:00:29 1995 Stan Shebs * h8300-tdep.c (gdb_print_insn_h8300): Fix typo (&info -> info). * sh-tdep.c (gdb_print_insn_sh): Ditto. Wed Jan 18 11:25:43 1995 Kung Hsu * remote-os9k.c (rombug_open): Fix a bug in exception handling command. * remote-os9k.c (rombug_write_inferior_memory): reset buffer after write. Tue Jan 17 09:48:38 1995 Jim Kingdon * parse.c (_initialize_parse): Improve wording of names of msym_*_symbol_type. Tue Jan 17 14:00:58 1995 Ian Lance Taylor * config/mips/tm-mips.h (enum mips_fpu_type): New enum. (mips_fpu): Change type to enum mips_fpu_type. (FIX_CALL_DUMMY): Handle mips_fpu == MIPS_FPU_SINGLE. * mips-tdep.c (mips_fpu): Change type to enum mips_fpu_type. Don't initialize. (mips_fpu_string): New static variable. (mips_push_dummy_frame): Handle mips_fpu == MIPS_FPU_SINGLE. (mips_pop_frame): Likewise. (mips_extract_return_value): Likewise. (mips_store_return_value): Likewise. (mips_set_fpu_command): New static function. (mips_show_fpu_command): New static function. (_initialize_mips_tdep): Change handling of set/show mipsfpu. Tue Jan 17 09:48:38 1995 Jim Kingdon * a29k-tdep.c (gdb_print_insn_a29k): Fix typo (&info -> info). * parse.c (write_exp_msymbol): Use new variables msym_*_symbol_type as type of msymbol expression. (_initialize_parse): Initialize them. Mon Jan 16 18:11:03 1995 Stan Shebs General cleanup and simplication of disassembler interface. * a29k-pinsn.c, arm-pinsn.c, convex-pinsn.c, gould-pinsn.c, hppa-pinsn.c, i386-pinsn.c, i960-pinsn.c, m68k-pinsn.c, m88k-pinsn.c, mips-pinsn.c, ns32k-pinsn.c, pyr-pinsn.c, rs6000-pinsn.c, sparc-pinsn.c, tahoe-pinsn.c, vax-pinsn.c: Remove. * gould-tdep.c, ns32k-tdep.c, tahoe-tdep.c, vax-tdep.c: New files, had been -pinsn.c files. * Makefile.in (ALLDEPFILES): Remove removed files. (a29k-pinsn.o, arm-pinsn.o, convex-pinsn.o, gould-pinsn.o, hppa-pinsn.o, i386-pinsn.o, i960-pinsn.o, m68k-pinsn.o, m88k-pinsn.o, mips-pinsn.o, ns32k-pinsn.o, pyr-pinsn.o, rs6000-pinsn.o, sparc-pinsn.o, tahoe-pinsn.o, vax-pinsn.o): Remove compile actions. * arm-tdep.o, gould-tdep.o, ns32k-tdep.o, tahoe-tdep.o, vax-tdep.o: Add compile actions. * defs.h (tm_print_insn): New global. * a29k-tdep.c (gdb_print_insn_a29k): New function. (_initialize_a29k_tdep): Rename from _initialize_29k, set tm_print_insn. * alpha-tdep.c (print_insn): Remove. (_initialize_alpha_tdep): Set tm_print_insn. * arm-tdep.c (arm_print_insn): New function, was print_insn in arm-pinsn.c. * convex-tdep.c (convex_print_insn): New function, was print_insn in convex-pinsn.c. * h8300-tdep.c (print_insn): Remove. (gdb_print_insn_h8300): New function. (_initialize_h8300_tdep): New function. * h8500-tdep.c (print_insn): Remove. (_initialize_h8500_tdep): New function. * hppa-tdep.c (_initialize_hppa_tdep): Set tm_print_insn. * i386-tdep.c (_initialize_i386_tdep): New function. * i960-tdep.c (mem, next_insn): New functions, were in i960-pinsn.c. (_initialize_i960_tdep): Set tm_print_insn. * m68k-tdep.c (_initialize_m68k_tdep): New function. * m88k-tdep.c (_initialize_m88k_tdep): New function. * mips-tdep.c (gdb_print_insn_mips): New function. (_initialize_mips_tdep): Set tm_print_insn. * pyr-tdep.c (pyr_print_insn): New function, was print_insn in pyr-pinsn.c. * rs6000-tdep.c (_initialize_rs6000_tdep): New function. * sh-tdep.c (print_insn): Remove. (gdb_print_insn_sh): New function. (_initialize_sh_tdep): Set tm_print_insn. * sparc-tdep.c (_initialize_sparc_tdep): New function. * w65-tdep.c (print_insn): Remove. (_initialize_w65_tdep): New function. * z8k-tdep.c (print_insn): Remove. (gdb_print_insn_z8k): New function. (_initialize_z8k_tdep): Set tm_print_insn. * printcmd.c (print_insn): New function, generic disassembler. * config/*/*.mt (TDEPFILES): Remove refs to *-pinsn.o. Mon Jan 16 15:43:29 1995 Kung Hsu * Makefile.in: add new files remote-vx29k.c, config/a29k/tm-vx29k.h, and config/a29k/vx29k.mt. * configure.in: add new configuration a29k-*-vxworks. * remote-vx29k.c: new file merged from WRS. * remote-vx.c: merge changes from WRS. * config/a29k/vx29k.mt: new file for new configuration. * config/a29k/tm-vx29k.h: new header file for newconfiguration. Sun Jan 15 14:36:19 1995 Steve Chamberlain * breakpoint.h (disable_breakpoint, enable_breakpoint): New declarations. (enum bpdisp): Change name of 'delete' member to 'del'. (struct bpstat): Changed name to 'bpstats'. * breakpoint.c (disable_breakpoint, enable_breakpoint, breakpoint_chain): Made globally visible. (bpstat_stop_status): Use new name for bpstat. (break_command_1, watch_command_1, catch_command_1, breakpoint_auto_delete, denable_delete_breakpoint): Use 'del' instead of 'delete'. (set_breakpoint_sal): New function. * defs.h (registers_changed_hook): New declaration. * infcmd.c (run_stack_dummy): 'delete' is now 'del'. * inflow.c (new_tty): Treat WIN32 in same way as __GO32__ * main.c (main): Don't scan options when in WIN32 and exit without entering main loop. * m2-exp.y (m2_elx): Member 'class' is now 'aclass'. * symtab.h (struct symbol, struct partial_symbol): Changed name of member 'class' to 'aclass'. (SYMBOL_CLASS, PSYMBOL_CLASS): Reflect change. * top.c (registers_changed_hook): New definition. * utils.c (quit, notice_quit, initialize_utils): Treate WIN32 in same way as __GO32__. * value.h (c_typedef_print): Rename 'new' argument. * w65-tdep.c, config/tm-w65.h, config/w65.mt: New files. * configure.in: Suppprt for w65, Sat Jan 14 11:18:11 1995 Jim Kingdon * infcmd.c (signal_command): For "signal 0", pass (CORE_ADDR)-1, not stop_pc, to proceed. * eval.c (evaluate_subexp): Clear expect_type except for C++ and CHILL. Fri Jan 13 17:52:57 1995 Jim Kingdon * infcmd.c (signal_command): Accept "signal 0"; the change to not accept it was accidental. "handle 0" and "info signal 0" remain illegal, though. Fri Jan 13 15:19:01 1995 Stan Shebs * Makefile.in (all): Don't make libgdb-files. (libgdb): New action, makes libgdb-files. Thu Jan 12 21:23:25 1995 Per Bothner * stabsread.c (read_enum_type): When pending enum symbols are put into the enum type, they must be inserted in "backwards order, in case we've overflowed a struct pending buffer. start-sanitize-gdbtk Thu Jan 12 15:02:40 1995 Stu Grossman (grossman@cygnus.com) * gdbtk.c, gdbtk.tcl: Update/add copyright. * gdbtk.tcl (build_framework): Several fixes for filespec widget, including dismiss button, and better error handling. * (create_command_win): Bind button 2 to retrieve selection. end-sanitize-gdbtk Thu Jan 12 09:33:24 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * README: Add note about SPARCworks cc release 3.0 and higher. Add procfs support for Alpha OSF/1-2.x. * config/alpha/nm-osf.h: Renamed from nm-alpha.h, generic OSF/1 native support. * config/alpha/alpha-osf1.mh (NAT_FILE): Changed accordingly. (MUNCH_DEFINE): Removed. * config/alpha/alpha-osf2.mh, config/alpha/nm-osf2.h: New files for procfs support. * configure.in (alpha-dec-osf*): Use alpha-osf2.mh for OSF/1 release 2.x and higher, else alpha-osf1.mh, as the procfs support in release 1.x is incomplete. * Makefile.in (ALLCONFIG): Add config/alpha/alpha-osf2.mh. * alpha-nat.c (supply_gregset, fill_gregset, supply_fpgregset, fill_fpgregset): New routines for procfs support. * inftarg.c (_initialize_inftarg): Don't add ptrace support if we have an optional procfs and /proc is accessible. * procfs.c: Include sys/fault.h and sys/syscall.h before including sys/procfs.h. (unconditionally_kill_inferior): If PROCFS_NEED_PIOCSSIG_FOR_KILL is defined, additionally perform a PIOCSSIG to really terminate the inferior. (create_procinfo): Always return a result. (create_procinfo, do_attach): Don't trace T_IFAULT faults if PROCFS_DONT_TRACE_IFAULT is defined. (procfs_init_inferior): Use START_INFERIOR_TRAPS_EXPECTED as argument to startup_inferior if it is defined. (proc_set_exec_trap): If PIOCSSPCACT is defined, use it instead of tracing exits from exec system calls. Needed for the user level loader under Alpha OSF/1. (do_detach): Clear any pending signal if we want to detach from a process without a signal. (set_proc_siginfo): If PROCFS_DONT_PIOCSSIG_CURSIG is defined, don't issue a PIOCSSIG if pr_cursig already contains the signal we intend to set. (info_proc_signals): If PROCFS_SIGPEND_OFFSET is defined, the pending signals are numbered from 1 instead of 0. (info_proc_mappings): Increase size of output format for addresses if BFD_HOST_64_BIT is defined. (procfs_stop): Renamed from child_stop. (_initialize_procfs): Don't add procfs support if we have an optional procfs and /proc is not accessible. start-sanitize-gdbtk Wed Jan 11 17:06:55 1995 Stu Grossman (grossman@cygnus.com) * gdbtk.tcl: Add button to control mixed source disassembly. Use text widgets in expr window. The give me more control over layout. Add auto-updating of exprs in expression window. Handle expressions out of scope a bit better. Make selected window pop up to the top when invoked via the menubar. Make copyright message have raised relief. * gdbtk.c (gdbtk_init): Improve handling for errors in gdbtk.tcl during startup. end-sanitize-gdbtk Wed Jan 11 17:53:26 1995 Rob Savoye * array-rom.c: Add support for most commands. * monitor.c: Add GDB remote protocol for the hybrid environment on the Array board. Wed Jan 11 00:44:01 1995 Jeff Law (law@snake.cs.utah.edu) * command.c (show_user_1): Use print_command_line to show a user defined command (including control structures). * top.c (init_main): Change documentation for user defined commands to indicate they may accept up to ten arguments. Tue Jan 10 16:22:41 1995 Jim Kingdon * mips-tdep.c (mips_skip_prologue): Accept or as well as addu for `move $s8, $sp' instruction. Sun Jan 8 12:45:34 1995 Jim Kingdon * target.c, target.h (target_signal_from_command): New function. * infrun.c (handle_command, signals_info), infcmd.c (signal_command): Use it. * infrun.c, infcmd.c: Update docstrings for these commands. * target.h (enum target_signal), target.c (signals), target.c (target_signal_from_host, target_signal_to_host): Add TARGET_SIGNAL_REALTIME_* and TARGET_SIGNAL_PRIO for lynx. * config/tm-lynx.h: Define signal numbers for realtime events. Sat Jan 7 07:23:53 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * dbxread.c (process_one_symbol): Handle N_FUN symbols for Sun acc 3.0 under SunOS4. Changes to improve handling of runtime common symbols under SunOS4. * minsyms.c (get_symbol_leading_char): New routine to determine the leading symbol character for an objfile. (prim_record_minimal_symbol_and_info, install_minimal_symbols): Use it. * objfiles.h (rt_common_objfile): New global, points to objfile containing the runtime common minimal symbols. * objfiles.c (free_objfile): Mark rt_common_objfile as unallocated before freeing it. * solib.c (allocate_rt_common_objfile): New routine to allocate an objfile for the runtime common minimal symbols. (solib_add_common_symbols): Allocate an objfile for the runtime common symbols if necessary and put common symbols into it. Clean up code and comments. (solib_add, special_symbol_handling): Cleanup comments regarding runtime common symbols. * stabsread.c (scan_file_globals_1): New routine, contains old scan_file_globals code. Checks if there are any unresolved global symbols before starting the expensive minimal symbol table search. (scan_file_globals): Now calls scan_file_globals_1 for the passed objfile and eventually for the runtime common objfile. Complains about any unresolved global symbols and removes them from the global symbol chain to avoid dangling pointers into the symbol table if the symbol table is reread. Thu Jan 5 17:38:29 1995 Stu Grossman (grossman@cygnus.com) * Makefile.in (install_only uninstall): Indent for clarity. * core.c (dis_asm_read_memory): Add call to dis_asm_read_memory_hook to provide alternate way for disassembler to read memory. * defs.h: Protect from multiple inclusion. Add decl for dis_asm_read_memory_hook. * top.c: Make window startup be the default. * Add dis_asm_read_memory_hook. start-sanitize-gdbtk * gdbtk.c (finish_saving_output): Don't do anything if not saving output. * (breakpoint_notify): Don't send null filename to tcl. * (gdb_eval): New tcl command to eval an expression. * (gdb_disassemble): New tcl command to do disassembly. This allows tcl code to choose between exec file and target memeory, and can also do mixed source and assembly. * (gdbtk_init): Move reading of gdbtk.tcl to the end to make sure that more of the environment is set up. Also, create link between gdb and tcl vars disassemble{-_}from{-_}exec. * gdbtk.tcl: New expression window support. * Make assembly window be 80 columns wide. * Use new disassembly method. Add menu items to select disassembly from exec file or target. * Change View menubar item to Options. * Get rid of Stack, Breakpoints, Signals, and Variables Windows, since they don't exist yet. * Pop up a copyright window on startup. end-sanitize-gdbtk Thu Jan 5 01:16:40 1995 Jeff Law (law@snake.cs.utah.edu) * stabsread.c (define_symbol): Handle `a' symbol type used for reference parameter passed in a register. start-sanitize-gdbtk Wed Jan 4 19:49:10 1995 Stan Shebs * gdbtk.tcl (build_framework): Add standard commands menu, more windows to standard windows menu. (not_implemented_yet): Clarify message. end-sanitize-gdbtk Wed Jan 4 12:27:29 1995 Kung Hsu * defs.h: move include tm.h up, so that the type LONGEST can also based on the target requirement to determine. In this case target mips64. * remote-os9k.c (rombug_open): catch exception e in rombug. * remote-os9k.c (rombug_wait): print message before register display from rombug. Wed Jan 4 09:18:27 1995 Jim Kingdon (kingdon@lioth.cygnus.com) * top.c (locate_arg): Call strchr not index. Tue Jan 3 16:52:03 1995 Per Bothner * ch-exp.y (literal): Recognize NULL. (tuple): Parse simple unlabelled tuples. * eval.c (evaluate_subexp case OP_ARRAY): Use expect_type to evaluate brace-initializer-expressions depending on context. (evaluate_subexp case UNOP_CAST): Pass the target type as expected type when evaluating the expression. * ch-typeprint.c (chill_type_print_base): Get names of PTR and BOOL from TYPE_NAME. * ch-valprint.c (chill_print_type_scalar): New function, to handle TYPE_CODE_RANGE better than print_type_scalar does. (chill_val_print_array_elements): Use above new function. Mon Jan 2 15:02:51 1995 Stan Shebs * remote-udi.c (udi_load): Tell symbol_file_add that the program being loaded is the main program. For older changes see ChangeLog-94 Local Variables: mode: indented-text left-margin: 8 fill-column: 74 version-control: never End: