/* dwarf2dbg.c - DWARF2 debug support Copyright (C) 1999, 2000 Free Software Foundation, Inc. Contributed by David Mosberger-Tang This file is part of GAS, the GNU Assembler. GAS is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. GAS is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GAS; see the file COPYING. If not, write to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* Logical line numbers can be controlled by the compiler via the following two directives: .file FILENO "file.c" .loc FILENO LINENO [COLUMN] FILENO is the filenumber. */ #include "ansidecl.h" #include "as.h" #include "dwarf2dbg.h" #include "subsegs.h" #include "elf/dwarf2.h" /* Since we can't generate the prolog until the body is complete, we use three different subsegments for .debug_line: one holding the prolog, one for the directory and filename info, and one for the body ("statement program"). */ #define DL_PROLOG 0 #define DL_FILES 1 #define DL_BODY 2 /* First special line opcde - leave room for the standard opcodes. Note: If you want to change this, you'll have to update the "standard_opcode_lengths" table that is emitted below in dwarf2_finish(). */ #define DWARF2_LINE_OPCODE_BASE 10 #ifndef DWARF2_LINE_BASE /* Minimum line offset in a special line info. opcode. This value was chosen to give a reasonable range of values. */ # define DWARF2_LINE_BASE -5 #endif /* Range of line offsets in a special line info. opcode. */ #ifndef DWARF2_LINE_RANGE # define DWARF2_LINE_RANGE 14 #endif #ifndef DWARF2_LINE_MIN_INSN_LENGTH /* Define the architecture-dependent minimum instruction length (in bytes). This value should be rather too small than too big. */ # define DWARF2_LINE_MIN_INSN_LENGTH 4 #endif /* Flag that indicates the initial value of the is_stmt_start flag. In the present implementation, we do not mark any lines as the beginning of a source statement, because that information is not made available by the GCC front-end. */ #define DWARF2_LINE_DEFAULT_IS_STMT 1 /* Flag that indicates the initial value of the is_stmt_start flag. In the present implementation, we do not mark any lines as the beginning of a source statement, because that information is not made available by the GCC front-end. */ #define DWARF2_LINE_DEFAULT_IS_STMT 1 /* Given a special op, return the line skip amount. */ #define SPECIAL_LINE(op) \ (((op) - DWARF2_LINE_OPCODE_BASE)%DWARF2_LINE_RANGE + DWARF2_LINE_BASE) /* Given a special op, return the address skip amount (in units of DWARF2_LINE_MIN_INSN_LENGTH. */ #define SPECIAL_ADDR(op) (((op) - DWARF2_LINE_OPCODE_BASE)/DWARF2_LINE_RANGE) /* The maximum address skip amount that can be encoded with a special op. */ #define MAX_SPECIAL_ADDR_DELTA SPECIAL_ADDR(255) #define INITIAL_STATE \ /* Initialize as per DWARF2.0 standard. */ \ 0, /* address */ \ 1, /* file */ \ 1, /* line */ \ 0, /* column */ \ DWARF2_LINE_DEFAULT_IS_STMT, /* is_stmt */ \ 0, /* basic_block */ \ 1 /* empty_sequence */ static struct { /* state machine state as per DWARF2 manual: */ struct dwarf2_sm { addressT addr; unsigned int filenum; unsigned int line; unsigned int column; unsigned int is_stmt : 1, basic_block : 1, empty_sequence : 1; /* current code sequence has no DWARF2 directives? */ } sm; unsigned int any_dwarf2_directives : 1; /* did we emit any DWARF2 line debug directives? */ fragS * frag; /* frag that "addr" is relative to */ segT text_seg; /* text segment "addr" is relative to */ subsegT text_subseg; segT line_seg; /* ".debug_line" segment */ int last_filename; /* index of last filename that was used */ int num_filenames; /* index of last filename in use */ int filename_len; /* length of the filename array */ struct { int dir; /* valid after gen_dir_list() only */ char *name; /* full path before gen_dir_list(), filename afterwards */ } *file; struct dwarf2_line_info current; /* current source info: */ /* counters for statistical purposes: */ unsigned int num_line_entries; unsigned int opcode_hist[256]; /* histogram of opcode frequencies */ } ls = { { INITIAL_STATE }, 0, 0, 0, 0, 0, 0, 0, 0, NULL, { NULL, 0, 0, 0, 0 }, 0, { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 } }; /* Function prototypes: */ static void out_uleb128 PARAMS ((addressT)); static void out_sleb128 PARAMS ((offsetT)); static void gen_addr_line PARAMS ((int, addressT)); static void reset_state_machine PARAMS ((void)); static void out_set_addr PARAMS ((addressT)); static void out_end_sequence PARAMS ((void)); static int get_filenum PARAMS ((int, char *)); static void gen_dir_list PARAMS ((void)); static void gen_file_list PARAMS ((void)); static void print_stats PARAMS ((unsigned long)); #define out_byte(byte) FRAG_APPEND_1_CHAR(byte) #define out_opcode(opc) (out_byte ((opc)), ++ls.opcode_hist[(opc) & 0xff]) /* Output an unsigned "little-endian base 128" number. */ static void out_uleb128 (value) addressT value; { unsigned char byte, more = 0x80; do { byte = value & 0x7f; value >>= 7; if (value == 0) more = 0; out_byte (more | byte); } while (more); } /* Output a signed "little-endian base 128" number. */ static void out_sleb128 (value) offsetT value; { unsigned char byte, more = 0x80; do { byte = value & 0x7f; value >>= 7; if (((value == 0) && ((byte & 0x40) == 0)) || ((value == -1) && ((byte & 0x40) != 0))) more = 0; out_byte (more | byte); } while (more); } /* Encode a pair of line and address skips as efficiently as possible. Note that the line skip is signed, whereas the address skip is unsigned. */ static void gen_addr_line (line_delta, addr_delta) int line_delta; addressT addr_delta; { unsigned int tmp, opcode; tmp = line_delta - DWARF2_LINE_BASE; if (tmp >= DWARF2_LINE_RANGE) { out_opcode (DW_LNS_advance_line); out_sleb128 (line_delta); tmp = 0 - DWARF2_LINE_BASE; line_delta = 0; } tmp += DWARF2_LINE_OPCODE_BASE; /* try using a special opcode: */ opcode = tmp + addr_delta*DWARF2_LINE_RANGE; if (opcode <= 255) { out_opcode (opcode); return; } /* try using DW_LNS_const_add_pc followed by special op: */ opcode = tmp + (addr_delta - MAX_SPECIAL_ADDR_DELTA)*DWARF2_LINE_RANGE; if (opcode <= 255) { out_opcode (DW_LNS_const_add_pc); out_opcode (opcode); return; } out_opcode (DW_LNS_advance_pc); out_uleb128 (addr_delta); if (line_delta) out_opcode (tmp); /* output line-delta */ else out_opcode (DW_LNS_copy); /* append new row with current info */ } static void reset_state_machine () { static const struct dwarf2_sm initial_state = { INITIAL_STATE }; ls.sm = initial_state; } /* Set an absolute address (may results in a relocation entry): */ static void out_set_addr (addr) addressT addr; { subsegT saved_subseg; segT saved_seg; expressionS expr; symbolS *sym; int bytes_per_address; saved_seg = now_seg; saved_subseg = now_subseg; subseg_set (ls.text_seg, ls.text_subseg); sym = symbol_new (".L0\001", now_seg, addr, frag_now); subseg_set (saved_seg, saved_subseg); #ifdef BFD_ASSEMBLER bytes_per_address = bfd_arch_bits_per_address (stdoutput) / 8; #else /* FIXME. */ bytes_per_address = 4; #endif out_opcode (DW_LNS_extended_op); out_uleb128 (bytes_per_address + 1); out_opcode (DW_LNE_set_address); expr.X_op = O_symbol; expr.X_add_symbol = sym; expr.X_add_number = 0; emit_expr (&expr, bytes_per_address); } /* Emit DW_LNS_end_sequence and reset state machine. Does not preserve the current segment/sub-segment! */ static void out_end_sequence () { addressT addr, delta; fragS *text_frag; if (ls.text_seg) { subseg_set (ls.text_seg, ls.text_subseg); #ifdef md_current_text_addr addr = md_current_text_addr (); #else addr = frag_now_fix (); #endif text_frag = frag_now; subseg_set (ls.line_seg, DL_BODY); if (text_frag != ls.frag) { out_set_addr (addr); ls.sm.addr = addr; ls.frag = text_frag; } else { delta = (addr - ls.sm.addr) / DWARF2_LINE_MIN_INSN_LENGTH; if (delta > 0) { /* Advance address without updating the line-debug matrix---the end_sequence entry is used only to tell the debugger the end of the sequence.*/ out_opcode (DW_LNS_advance_pc); out_uleb128 (delta); } } } else subseg_set (ls.line_seg, DL_BODY); out_opcode (DW_LNS_extended_op); out_uleb128 (1); out_byte (DW_LNE_end_sequence); reset_state_machine (); } /* Look up a filenumber either by filename or by filenumber. If both a filenumber and a filename are specified, lookup by filename takes precedence. If the filename cannot be found, it is added to the filetable and the filenumber for the new entry is returned. */ static int get_filenum (filenum, file) int filenum; char *file; { int i, last = filenum - 1; char char0 = file[0]; /* If filenum is out of range of the filename table, then try using the table entry returned from the previous call. */ if (last >= ls.num_filenames || last < 0) last = ls.last_filename; /* Do a quick check against the specified or previously used filenum. */ if (ls.num_filenames > 0 && ls.file[last].name[0] == char0 && strcmp (ls.file[last].name + 1, file + 1) == 0) return last + 1; /* no match, fall back to simple linear scan: */ for (i = 0; i < ls.num_filenames; ++i) { if (ls.file[i].name[0] == char0 && strcmp (ls.file[i].name + 1, file + 1) == 0) { ls.last_filename = i; return i + 1; } } /* no match: enter new filename */ if (ls.num_filenames >= ls.filename_len) { ls.filename_len += 13; ls.file = xrealloc (ls.file, ls.filename_len * sizeof (ls.file[0])); } ls.file[ls.num_filenames].dir = 0; ls.file[ls.num_filenames].name = file; ls.last_filename = ls.num_filenames; return ++ls.num_filenames; } /* Emit an entry in the line number table if the address or line has changed. ADDR is relative to the current frag in the text section. */ void dwarf2_gen_line_info (addr, l) addressT addr; struct dwarf2_line_info *l; { unsigned int filenum = l->filenum; unsigned int any_output = 0; subsegT saved_subseg; segT saved_seg; fragS *saved_frag; if (flag_debug) fprintf (stderr, "line: addr %lx file `%s' line %u col %u flags %x\n", (unsigned long) addr, l->filename, l->line, l->column, l->flags); if (filenum > 0 && !l->filename) { if (filenum >= (unsigned int) ls.num_filenames) { as_warn ("Encountered bad file number in line number debug info!"); return; } } else if (l->filename) filenum = get_filenum (filenum, l->filename); else return; /* no filename, no filnum => no play */ /* Must save these before the subseg_new call, as that call will change them. */ saved_seg = now_seg; saved_subseg = now_subseg; saved_frag = frag_now; if (!ls.line_seg) { #ifdef BFD_ASSEMBLER symbolS *secsym; #endif ls.line_seg = subseg_new (".debug_line", 0); #ifdef BFD_ASSEMBLER bfd_set_section_flags (stdoutput, ls.line_seg, SEC_READONLY); /* We're going to need this symbol. */ secsym = symbol_find (".debug_line"); if (secsym != NULL) symbol_set_bfdsym (secsym, ls.line_seg->symbol); else symbol_table_insert (section_symbol (ls.line_seg)); #endif } subseg_set (ls.line_seg, DL_BODY); if (ls.text_seg != saved_seg || ls.text_subseg != saved_subseg) { if (!ls.sm.empty_sequence) { out_end_sequence (); /* terminate previous sequence */ ls.sm.empty_sequence = 1; } any_output = 1; ls.text_seg = saved_seg; ls.text_subseg = saved_subseg; out_set_addr (addr); ls.sm.addr = addr; ls.frag = saved_frag; } if (ls.sm.filenum != filenum) { any_output = 1; out_opcode (DW_LNS_set_file); out_uleb128 (filenum); ls.sm.filenum = filenum; } if (ls.sm.column != l->column) { any_output = 1; out_opcode (DW_LNS_set_column); out_uleb128 (l->column); ls.sm.column = l->column; } if (((l->flags & DWARF2_FLAG_BEGIN_STMT) != 0) != ls.sm.is_stmt) { any_output = 1; out_opcode (DW_LNS_negate_stmt); } if (l->flags & DWARF2_FLAG_BEGIN_BLOCK) { any_output = 1; out_opcode (DW_LNS_set_basic_block); } if (ls.sm.line != l->line) { any_output = 1; if (saved_frag != ls.frag) { /* If a new frag got allocated (for whatever reason), then deal with it by generating a reference symbol. Note: no end_sequence needs to be generated because the address did not really decrease (only the reference point changed). */ out_set_addr (addr); ls.sm.addr = addr; ls.frag = saved_frag; } gen_addr_line (l->line - ls.sm.line, (addr - ls.sm.addr) / DWARF2_LINE_MIN_INSN_LENGTH); ls.sm.basic_block = 0; ls.sm.line = l->line; ls.sm.addr = addr; } subseg_set (saved_seg, saved_subseg); ls.num_line_entries += any_output; if (any_output) ls.sm.empty_sequence = 0; } static void gen_dir_list () { char *str, *slash, *dir_list, *dp, *cp; int i, j, num_dirs; dir_list = frag_more (0); num_dirs = 0; for (i = 0; i < ls.num_filenames; ++i) { str = ls.file[i].name; slash = strrchr (str, '/'); if (slash) { *slash = '\0'; for (j = 0, dp = dir_list; j < num_dirs; ++j) { if (strcmp (str, dp) == 0) { ls.file[i].dir = j + 1; break; } dp += strlen (dp); } if (j >= num_dirs) { /* didn't find this directory: append it to the list */ size_t size = strlen (str) + 1; cp = frag_more (size); memcpy (cp, str, size); ls.file[i].dir = ++num_dirs; } *slash = '/'; ls.file[i].name = slash + 1; } } out_byte ('\0'); /* terminate directory list */ } static void gen_file_list () { size_t size; char *cp; int i; for (i = 0; i < ls.num_filenames; ++i) { size = strlen (ls.file[i].name) + 1; cp = frag_more (size); memcpy (cp, ls.file[i].name, size); out_uleb128 (ls.file[i].dir); /* directory number */ out_uleb128 (0); /* last modification timestamp */ out_uleb128 (0); /* filesize */ } out_byte (0); /* terminate filename list */ } static void print_stats (total_size) unsigned long total_size; { static const char *opc_name[] = { "extended", "copy", "advance_pc", "advance_line", "set_file", "set_column", "negate_stmt", "set_basic_block", "const_add_pc", "fixed_advance_pc" }; size_t i; int j; fprintf (stderr, "Average size: %g bytes/line\n", total_size / (double) ls.num_line_entries); fprintf (stderr, "\nStandard opcode histogram:\n"); for (i = 0; i < sizeof (opc_name)/sizeof (opc_name[0]); ++i) { fprintf (stderr, "%s", opc_name[i]); for (j = strlen (opc_name[i]); j < 16; ++j) fprintf (stderr, " "); fprintf (stderr, ": %u\n", ls.opcode_hist[i]); } fprintf (stderr, "\nSpecial opcodes:\naddr\t\t\t\tline skip\n"); fprintf (stderr, "skip: "); for (j = DWARF2_LINE_BASE; j < DWARF2_LINE_BASE + DWARF2_LINE_RANGE; ++j) fprintf (stderr, "%3d", j); fprintf (stderr, "\n-----"); for (; i < 256; ++i) { j = SPECIAL_LINE (i); if (j == DWARF2_LINE_BASE) fprintf (stderr, "\n%4u: ", ((unsigned int) DWARF2_LINE_MIN_INSN_LENGTH * SPECIAL_ADDR (i))); fprintf (stderr, " %2u", ls.opcode_hist[i]); } fprintf (stderr, "\n"); } void dwarf2_finish () { addressT body_size, total_size, prolog_size; subsegT saved_subseg; segT saved_seg; char *cp; if (!ls.line_seg) /* no .debug_line segment, no work to do... */ return; saved_seg = now_seg; saved_subseg = now_subseg; if (!ls.sm.empty_sequence) out_end_sequence (); total_size = body_size = frag_now_fix (); /* now generate the directory and file lists: */ subseg_set (ls.line_seg, DL_FILES); gen_dir_list (); gen_file_list (); total_size += frag_now_fix (); /* and now the header ("statement program prolog", in DWARF2 lingo...) */ subseg_set (ls.line_seg, DL_PROLOG); cp = frag_more (15 + DWARF2_LINE_OPCODE_BASE - 1); total_size += frag_now_fix (); prolog_size = total_size - body_size - 10; # define STUFF(val,size) md_number_to_chars (cp, val, size); cp += size; STUFF (total_size - 4, 4); /* length */ STUFF (2, 2); /* version */ STUFF (prolog_size, 4); /* prologue_length */ STUFF (DWARF2_LINE_MIN_INSN_LENGTH, 1); STUFF (DWARF2_LINE_DEFAULT_IS_STMT, 1); STUFF (DWARF2_LINE_BASE, 1); STUFF (DWARF2_LINE_RANGE, 1); STUFF (DWARF2_LINE_OPCODE_BASE, 1); /* standard_opcode_lengths: */ STUFF (0, 1); /* DW_LNS_copy */ STUFF (1, 1); /* DW_LNS_advance_pc */ STUFF (1, 1); /* DW_LNS_advance_line */ STUFF (1, 1); /* DW_LNS_set_file */ STUFF (1, 1); /* DW_LNS_set_column */ STUFF (0, 1); /* DW_LNS_negate_stmt */ STUFF (0, 1); /* DW_LNS_set_basic_block */ STUFF (0, 1); /* DW_LNS_const_add_pc */ STUFF (1, 1); /* DW_LNS_fixed_advance_pc */ subseg_set (saved_seg, saved_subseg); if (flag_debug) print_stats (total_size); } void dwarf2_directive_file (dummy) int dummy ATTRIBUTE_UNUSED; { int len; /* Continue to accept a bare string and pass it off. */ SKIP_WHITESPACE (); if (*input_line_pointer == '"') { s_app_file (0); return; } ls.any_dwarf2_directives = 1; if (debug_type == DEBUG_NONE) /* Automatically turn on DWARF2 debug info unless something else has been selected. */ debug_type = DEBUG_DWARF2; ls.current.filenum = get_absolute_expression (); ls.current.filename = demand_copy_C_string (&len); demand_empty_rest_of_line (); } void dwarf2_directive_loc (dummy) int dummy ATTRIBUTE_UNUSED; { ls.any_dwarf2_directives = 1; ls.current.filenum = get_absolute_expression (); SKIP_WHITESPACE (); ls.current.line = get_absolute_expression (); SKIP_WHITESPACE (); ls.current.column = get_absolute_expression (); demand_empty_rest_of_line (); ls.current.flags = DWARF2_FLAG_BEGIN_STMT; #ifndef NO_LISTING if (listing) listing_source_line (ls.current.line); #endif } void dwarf2_where (line) struct dwarf2_line_info *line; { if (ls.any_dwarf2_directives) *line = ls.current; else { as_where (&line->filename, &line->line); line->filenum = 0; line->column = 0; line->flags = DWARF2_FLAG_BEGIN_STMT; } }