dnl Process this file with autoconf to produce a configure script. dnl dnl And be careful when changing it! If you must add tests with square dnl brackets, be sure changequote invocations surround it. dnl dnl AC_PREREQ(1.118)dnl AC_INIT(as.h)dnl dnl bfd_gas=no user_bfd_gas= AC_ARG_ENABLE(bfd-assembler, [ bfd-assembler use BFD back end for writing object files], [case "${enableval}" in yes) need_bfd=yes user_bfd_gas=yes ;; no) user_bfd_gas=no ;; *) AC_MSG_ERROR(bad value ${enableval} given for bfd-assembler option) ;; esac])dnl # Generate a header file -- gets more post-processing by Makefile later. AC_CONFIG_HEADER(conf) dnl For recursion to work right, this must be an absolute pathname. AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/..) AC_CANONICAL_SYSTEM AC_ARG_PROGRAM emulation=generic # assign cpu type # check for architecture variants case ${target_cpu} in hppa*) cpu_type=hppa ;; changequote(,)dnl i[45]86) cpu_type=i386 ;; m680[012346]0) cpu_type=m68k ;; m68008) cpu_type=m68k ;; m683??) cpu_type=m68k ;; changequote([,])dnl m8*) cpu_type=m88k ;; mips*el) cpu_type=mips endian=little;; mips*) cpu_type=mips endian=big ;; powerpc*) cpu_type=ppc ;; rs6000*) cpu_type=ppc ;; sparc64) cpu_type=sparc obj_format=elf AC_DEFINE(sparcv9) ;; sparclite*) cpu_type=sparc ;; *) cpu_type=${target_cpu} ;; esac # do we need the opcodes library? case ${cpu_type} in alpha | vax) ;; *) OPCODES_LIB="../opcodes/libopcodes.a" ;; esac AC_SUBST(OPCODES_LIB) gas_target=${cpu_type} generic_target=${cpu_type}-${target_vendor}-${target_os} dev=no # assign object format case ${generic_target} in a29k-amd-udi) obj_format=coff gas_target=ebmon29k ;; a29k-amd-ebmon) obj_format=coff gas_target=ebmon29k ;; alpha-*-netware*) obj_format=ecoff ;; alpha-*-osf*) obj_format=ecoff ;; arm-*-riscix*) obj_format=aout ;; hppa-*-*elf*) obj_format=elf emulation=hppa ;; hppa-*-osf*) obj_format=som emulation=hppa ;; hppa-*-hpux*) obj_format=som emulation=hppa ;; hppa-*-bsd*) obj_format=som emulation=hppa ;; hppa-*-hiux*) obj_format=som emulation=hppa ;; h8300-*-coff) obj_format=coff ;; i386-ibm-aix*) obj_format=coff gas_target=i386coff emulation=i386aix ;; i386-*-bsd*) obj_format=aout emulation=386bsd ;; i386-*-netbsd0.8) obj_format=aout emulation=386bsd ;; i386-*-netbsd*) obj_format=aout emulation=nbsd bfd_gas=yes;; i386-*-linux*elf*) obj_format=elf emulation=linux ;; i386-*-linux*coff*) obj_format=coff emulation=linux gas_target=i386coff ;; i386-*-linux*) obj_format=aout emulation=linux ;; i386-*-lynxos*) obj_format=coff gas_target=i386coff emulation=lynx ;; i386-*-sysv4* | i386-*-solaris* | i386-*-elf) obj_format=elf ;; i386-*-coff | i386-*-sysv* | i386-*-sco* | i386-*-isc*) obj_format=coff gas_target=i386coff ;; i386-*-vsta) obj_format=aout ;; i386-*-go32) obj_format=coff gas_target=i386coff ;; i386-*-mach* | i386-*-gnu*) obj_format=aout emulation=mach bfd_gas=yes ;; i960-*-bout) obj_format=bout ;; i960-*-coff) obj_format=coff emulation=ic960 gas_target=ic960coff ;; i960-*-nindy*) obj_format=bout ;; i960-*-vxworks4*) obj_format=bout ;; i960-*-vxworks5.0) obj_format=bout ;; i960-*-vxworks5.*) obj_format=coff emulation=ic960 gas_target=ic960coff ;; i960-*-vxworks*) obj_format=bout ;; m68k-wrs-vxworks | m68k-ericsson-ose | m68k-*-sunos*) obj_format=aout emulation=sun3 ;; m68k-motorola-sysv) obj_format=coff gas_target=m68kcoff emulation=delta ;; m68k-bull-sysv3*) obj_format=coff gas_target=m68kcoff emulation=dpx2 ;; m68k-apollo-*) obj_format=coff gas_target=apollo emulation=apollo ;; m68k-*-coff | m68k-*-sysv*) obj_format=coff gas_target=m68kcoff ;; m68k-*-hpux*) obj_format=hp300 emulation=hp300 ;; m68k-*-lynxos*) obj_format=coff gas_target=m68kcoff emulation=lynx ;; m68k-*-netbsd*) obj_format=aout emulation=nbsd bfd_gas=yes ;; m88k-*-coff*) obj_format=coff gas_target=m88kcoff ;; # don't change emulation like *-*-bsd does mips-*-bsd*) obj_format=aout gas_target=mips-lit ;; mips-*-ultrix*) obj_format=ecoff gas_target=mips-lit ;; mips-*-ecoff*) obj_format=ecoff case "$endian" in big) gas_target=mips-big ;; *) gas_target=mips-lit ;; esac ;; mips-*-ecoff*) obj_format=ecoff gas_target=mips-big ;; mips-*-irix5*) obj_format=elf gas_target=mips-big ;; mips-*-irix*) obj_format=ecoff gas_target=mips-big ;; mips-*-riscos*) obj_format=ecoff gas_target=mips-big ;; mips-*-sysv*) obj_format=ecoff gas_target=mips-big ;; mips-*-elf*) obj_format=elf case "$endian" in big) gas_target=mips-big ;; *) gas_target=mips-lit ;; esac ;; ppc-*-aix*) obj_format=coff ;; ppc-*-elf*) obj_format=elf ;; ppc-*-netware*) obj_format=elf emulation=ppcnw ;; ppc-*-sysv4*) obj_format=elf ;; sh-*-coff) obj_format=coff ;; # start-sanitize-rce rce-*-aout) obj_format=aout ;; # end-sanitize-rce ns32k-pc532-mach*) obj_format=aout emulation=pc532 ;; ns32k-pc532-netbsd*) obj_format=aout emulation=nbsd532 ;; sparc-*-sunos4*) obj_format=aout emulation=sun3 ;; sparc-*-aout | sparc*-*-vxworks) obj_format=aout ;; sparc-*-coff) obj_format=coff ;; sparc-*-lynxos*) obj_format=coff emulation=lynx ;; sparc-fujitsu-none) obj_format=aout ;; sparc-*-elf | sparc*-*-solaris*) obj_format=elf ;; sparc-*-netbsd*) obj_format=aout emulation=nbsd bfd_gas=yes ;; vax-*-bsd* | vax-*-ultrix*) obj_format=aout ;; vax-*-vms) obj_format=vms ;; z8k-*-coff | z8k-*-sim) obj_format=coff ;; *-*-aout | *-*-scout) obj_format=aout ;; *-*-nindy*) obj_format=bout ;; *-*-bsd*) obj_format=aout emulation=sun3 ;; *-*-generic) obj_format=generic ;; *-*-xray | *-*-hms) obj_format=coff ;; *-*-sim) obj_format=coff ;; *-*-elf | *-*-sysv4* | *-*-solaris*) AC_MSG_WARN(GAS support for ELF format is incomplete) obj_format=elf dev=yes ;; *-*-vxworks) obj_format=aout ;; *-*-netware) obj_format=elf ;; esac # Assign floating point type. Most processors with FP support # IEEE FP. On those that don't support FP at all, usually IEEE # is emulated. case ${target_cpu} in vax | tahoe ) atof=${target_cpu} ;; *) atof=ieee ;; esac case "${obj_format}" in "") AC_MSG_ERROR(GAS does not know what format to use for target ${target}) ;; esac dnl dnl Make sure the desired support files exist. dnl if test ! -r ${srcdir}/config/tc-${cpu_type}.c; then AC_MSG_ERROR(GAS does not support target CPU ${cpu_type}) fi if test ! -r ${srcdir}/config/obj-${obj_format}.c; then AC_MSG_ERROR(GAS does not have support for object file format ${obj_format}) fi # and target makefile frag target_frag=${srcdir}/config/${gas_target}.mt if test ! -r ${target_frag}; then target_frag=/dev/null # ick! but subst_file can't be conditionalized fi AC_SUBST_FILE(target_frag) case ${cpu_type}-${obj_format} in arm-*) bfd_gas=yes ;; # not yet # i386-aout) bfd_gas=preferred ;; mips-*) bfd_gas=yes ;; ns32k-*) bfd_gas=yes ;; ppc-*) bfd_gas=yes ;; sparc-*) bfd_gas=yes ;; *-elf) bfd_gas=yes ;; *-ecoff) bfd_gas=yes ;; *-som) bfd_gas=yes ;; *) ;; esac case ${user_bfd_gas}-${bfd_gas} in yes-yes | no-no) # We didn't override user's choice. ;; no-yes) AC_MSG_WARN(Use of BFD is required for ${target}; overriding config options.) ;; no-preferred) bfd_gas=no ;; *-preferred) bfd_gas=yes ;; yes-*) bfd_gas=yes ;; -*) # User specified nothing. ;; esac case ${bfd_gas}-${cpu_type}-${obj_format} in yes-*-coff) need_bfd=yes ;; no-*-coff) need_bfd=yes AC_DEFINE(MANY_SEGMENTS) ;; esac reject_dev_configs=yes case ${reject_dev_configs}-${dev} in yes-yes) # Oops. AC_MSG_ERROR(GAS does not support the ${generic_target} configuration.) ;; esac AC_LINK_FILES(config/tc-${cpu_type}.c config/tc-${cpu_type}.h \ config/obj-${obj_format}.h config/obj-${obj_format}.c \ config/te-${emulation}.h config/atof-${atof}.c, targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c) case "${bfd_gas}" in yes) AC_DEFINE(BFD_ASSEMBLER) need_bfd=yes ;; esac case "${need_bfd}" in yes) BFDLIB=../bfd/libbfd.a ALL_OBJ_DEPS="$ALL_OBJ_DEPS ../bfd/bfd.h" ;; esac AC_SUBST(BFDLIB) AC_SUBST(ALL_OBJ_DEPS) AC_DEFINE_UNQUOTED(TARGET_ALIAS, "${target_alias}") AC_DEFINE_UNQUOTED(TARGET_CANONICAL, "${target}") AC_DEFINE_UNQUOTED(TARGET_CPU, "${target_cpu}") AC_DEFINE_UNQUOTED(TARGET_VENDOR, "${target_vendor}") AC_DEFINE_UNQUOTED(TARGET_OS, "${target_os}") AC_PROG_CC AC_PROG_INSTALL AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h) # Put this here so that autoconf's "cross-compiling" message doesn't confuse # people who are not cross-compiling but are compiling cross-assemblers. AC_MSG_CHECKING(whether compiling a cross-assembler) if test "${host}" = "${target}"; then cross_gas=no else cross_gas=yes AC_DEFINE(CROSS_COMPILE) fi AC_MSG_RESULT($cross_gas) dnl ansidecl.h will deal with const dnl AC_CONST AC_FUNC_ALLOCA AC_C_INLINE # VMS doesn't have unlink. AC_CHECK_FUNCS(unlink remove, break) # Some non-ANSI preprocessors botch requoting inside strings. That's bad # enough, but on some of those systems, the assert macro relies on requoting # working properly! GAS_WORKING_ASSERT # On some systems, the system header files may not declare malloc, realloc, # and free. There are places where gas needs these functions to have been # declared -- such as when taking their addresses. gas_test_headers=" #ifdef HAVE_MEMORY_H #include #endif #ifdef HAVE_STRING_H #include #endif #ifdef HAVE_STDLIB_H #include #endif #ifdef HAVE_UNISTD_H #include #endif " GAS_CHECK_DECL_NEEDED(malloc, f, char *(*f)(), $gas_test_headers) GAS_CHECK_DECL_NEEDED(free, f, int f, $gas_test_headers) # Does errno.h declare errno, or do we have to add a separate declaration # for it? GAS_CHECK_DECL_NEEDED(errno, f, int f, [ #ifdef HAVE_ERRNO_H #include #endif ]) AC_CONFIG_SUBDIRS(testsuite) dnl This must come last. AC_OUTPUT(Makefile doc/Makefile .gdbinit:gdbinit.in)