/* tc-sh.c -- Assemble code for the Hitachi Super-H Copyright 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc. This file is part of GAS, the GNU Assembler. GAS is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. GAS is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GAS; see the file COPYING. If not, write to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* Written By Steve Chamberlain */ #include #include "as.h" #include "bfd.h" #include "subsegs.h" #define DEFINE_TABLE #include "opcodes/sh-opc.h" #include "safe-ctype.h" #include "struc-symbol.h" #ifdef OBJ_ELF #include "elf/sh.h" #endif #include "dwarf2dbg.h" typedef struct { sh_arg_type type; int reg; expressionS immediate; } sh_operand_info; const char comment_chars[] = "!"; const char line_separator_chars[] = ";"; const char line_comment_chars[] = "!#"; static void s_uses PARAMS ((int)); static void sh_count_relocs PARAMS ((bfd *, segT, PTR)); static void sh_frob_section PARAMS ((bfd *, segT, PTR)); static void s_uacons PARAMS ((int)); static sh_opcode_info *find_cooked_opcode PARAMS ((char **)); static unsigned int assemble_ppi PARAMS ((char *, sh_opcode_info *)); static void little PARAMS ((int)); static bfd_reloc_code_real_type sh_elf_suffix PARAMS ((char **str_p, expressionS *, expressionS *new_exp_p)); static int parse_reg PARAMS ((char *, int *, int *)); static symbolS *dot PARAMS ((void)); static char *parse_exp PARAMS ((char *, sh_operand_info *)); static char *parse_at PARAMS ((char *, sh_operand_info *)); static void get_operand PARAMS ((char **, sh_operand_info *)); static char *get_operands PARAMS ((sh_opcode_info *, char *, sh_operand_info *)); static sh_opcode_info *get_specific PARAMS ((sh_opcode_info *, sh_operand_info *)); static void insert PARAMS ((char *, int, int, sh_operand_info *)); static void build_relax PARAMS ((sh_opcode_info *, sh_operand_info *)); static char *insert_loop_bounds PARAMS ((char *, sh_operand_info *)); static unsigned int build_Mytes PARAMS ((sh_opcode_info *, sh_operand_info *)); #ifdef OBJ_ELF static void sh_elf_cons PARAMS ((int)); symbolS *GOT_symbol; /* Pre-defined "_GLOBAL_OFFSET_TABLE_" */ #endif int shl = 0; static void little (ignore) int ignore ATTRIBUTE_UNUSED; { shl = 1; target_big_endian = 0; } /* This table describes all the machine specific pseudo-ops the assembler has to support. The fields are: pseudo-op name without dot function to call to execute this pseudo-op Integer arg to pass to the function. */ const pseudo_typeS md_pseudo_table[] = { #ifdef OBJ_ELF {"long", sh_elf_cons, 4}, {"int", sh_elf_cons, 4}, {"word", sh_elf_cons, 2}, {"short", sh_elf_cons, 2}, #else {"int", cons, 4}, {"word", cons, 2}, #endif /* OBJ_ELF */ {"form", listing_psize, 0}, {"little", little, 0}, {"heading", listing_title, 0}, {"import", s_ignore, 0}, {"page", listing_eject, 0}, {"program", s_ignore, 0}, {"uses", s_uses, 0}, {"uaword", s_uacons, 2}, {"ualong", s_uacons, 4}, {"uaquad", s_uacons, 8}, {"2byte", s_uacons, 2}, {"4byte", s_uacons, 4}, {"8byte", s_uacons, 8}, #ifdef BFD_ASSEMBLER {"file", dwarf2_directive_file, 0 }, {"loc", dwarf2_directive_loc, 0 }, #endif {0, 0, 0} }; /*int md_reloc_size; */ int sh_relax; /* set if -relax seen */ /* Whether -small was seen. */ int sh_small; /* Whether -dsp was seen. */ static int sh_dsp; /* The bit mask of architectures that could accomodate the insns seen so far. */ static int valid_arch; const char EXP_CHARS[] = "eE"; /* Chars that mean this number is a floating point constant. */ /* As in 0f12.456 */ /* or 0d1.2345e12 */ const char FLT_CHARS[] = "rRsSfFdDxXpP"; #define C(a,b) ENCODE_RELAX(a,b) #define ENCODE_RELAX(what,length) (((what) << 4) + (length)) #define GET_WHAT(x) ((x>>4)) /* These are the three types of relaxable instrction. */ #define COND_JUMP 1 #define COND_JUMP_DELAY 2 #define UNCOND_JUMP 3 #define END 4 #define UNDEF_DISP 0 #define COND8 1 #define COND12 2 #define COND32 3 #define UNDEF_WORD_DISP 4 #define UNCOND12 1 #define UNCOND32 2 /* Branch displacements are from the address of the branch plus four, thus all minimum and maximum values have 4 added to them. */ #define COND8_F 258 #define COND8_M -252 #define COND8_LENGTH 2 /* There is one extra instruction before the branch, so we must add two more bytes to account for it. */ #define COND12_F 4100 #define COND12_M -4090 #define COND12_LENGTH 6 #define COND12_DELAY_LENGTH 4 /* ??? The minimum and maximum values are wrong, but this does not matter since this relocation type is not supported yet. */ #define COND32_F (1<<30) #define COND32_M -(1<<30) #define COND32_LENGTH 14 #define UNCOND12_F 4098 #define UNCOND12_M -4092 #define UNCOND12_LENGTH 2 /* ??? The minimum and maximum values are wrong, but this does not matter since this relocation type is not supported yet. */ #define UNCOND32_F (1<<30) #define UNCOND32_M -(1<<30) #define UNCOND32_LENGTH 14 #define EMPTY { 0, 0, 0, 0 } const relax_typeS md_relax_table[C (END, 0)] = { EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, /* C (COND_JUMP, COND8) */ { COND8_F, COND8_M, COND8_LENGTH, C (COND_JUMP, COND12) }, /* C (COND_JUMP, COND12) */ { COND12_F, COND12_M, COND12_LENGTH, C (COND_JUMP, COND32), }, /* C (COND_JUMP, COND32) */ { COND32_F, COND32_M, COND32_LENGTH, 0, }, /* C (COND_JUMP, UNDEF_WORD_DISP) */ { 0, 0, COND32_LENGTH, 0, }, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, /* C (COND_JUMP_DELAY, COND8) */ { COND8_F, COND8_M, COND8_LENGTH, C (COND_JUMP_DELAY, COND12) }, /* C (COND_JUMP_DELAY, COND12) */ { COND12_F, COND12_M, COND12_DELAY_LENGTH, C (COND_JUMP_DELAY, COND32), }, /* C (COND_JUMP_DELAY, COND32) */ { COND32_F, COND32_M, COND32_LENGTH, 0, }, /* C (COND_JUMP_DELAY, UNDEF_WORD_DISP) */ { 0, 0, COND32_LENGTH, 0, }, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, /* C (UNCOND_JUMP, UNCOND12) */ { UNCOND12_F, UNCOND12_M, UNCOND12_LENGTH, C (UNCOND_JUMP, UNCOND32), }, /* C (UNCOND_JUMP, UNCOND32) */ { UNCOND32_F, UNCOND32_M, UNCOND32_LENGTH, 0, }, EMPTY, /* C (UNCOND_JUMP, UNDEF_WORD_DISP) */ { 0, 0, UNCOND32_LENGTH, 0, }, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, }; #undef EMPTY static struct hash_control *opcode_hash_control; /* Opcode mnemonics */ #ifdef OBJ_ELF /* Parse @got, etc. and return the desired relocation. If we have additional arithmetic expression, then we fill in new_exp_p. */ static bfd_reloc_code_real_type sh_elf_suffix (str_p, exp_p, new_exp_p) char **str_p; expressionS *exp_p, *new_exp_p; { struct map_bfd { char *string; int length; bfd_reloc_code_real_type reloc; }; char ident[20]; char *str = *str_p; char *str2; int ch; int len; struct map_bfd *ptr; #define MAP(str,reloc) { str, sizeof (str)-1, reloc } static struct map_bfd mapping[] = { MAP ("got", BFD_RELOC_32_GOT_PCREL), MAP ("plt", BFD_RELOC_32_PLT_PCREL), MAP ("gotoff", BFD_RELOC_32_GOTOFF), { (char *)0, 0, BFD_RELOC_UNUSED } }; if (*str++ != '@') return BFD_RELOC_UNUSED; for (ch = *str, str2 = ident; (str2 < ident + sizeof (ident) - 1 && (ISALNUM (ch) || ch == '@')); ch = *++str) *str2++ = TOLOWER (ch); *str2 = '\0'; len = str2 - ident; ch = ident[0]; for (ptr = &mapping[0]; ptr->length > 0; ptr++) if (ch == ptr->string[0] && len == ptr->length && memcmp (ident, ptr->string, ptr->length) == 0) { /* Now check for identifier@suffix+constant */ if (*str == '-' || *str == '+') { char *orig_line = input_line_pointer; input_line_pointer = str; expression (new_exp_p); if (new_exp_p->X_op == O_constant) { exp_p->X_add_number += new_exp_p->X_add_number; str = input_line_pointer; } if (new_exp_p->X_op == O_subtract) str = input_line_pointer; if (&input_line_pointer != str_p) input_line_pointer = orig_line; } *str_p = str; return ptr->reloc; } return BFD_RELOC_UNUSED; } /* The regular cons() function, that reads constants, doesn't support suffixes such as @GOT, @GOTOFF and @PLT, that generate machine-specific relocation types. So we must define it here. */ /* Clobbers input_line_pointer, checks end-of-line. */ static void sh_elf_cons (nbytes) register int nbytes; /* 1=.byte, 2=.word, 4=.long */ { expressionS exp, new_exp; bfd_reloc_code_real_type reloc; const char *name; if (is_it_end_of_statement ()) { demand_empty_rest_of_line (); return; } do { expression (&exp); new_exp.X_op = O_absent; new_exp.X_add_symbol = new_exp.X_op_symbol = NULL; /* If the _GLOBAL_OFFSET_TABLE_ symbol hasn't been found yet, use the name of the symbol to tell whether it's the _GLOBAL_OFFSET_TABLE_. If it has, comparing the symbols is sufficient. */ if (! GOT_symbol && exp.X_add_symbol) name = S_GET_NAME (exp.X_add_symbol); else name = NULL; /* Check whether this expression involves the _GLOBAL_OFFSET_TABLE_ symbol, by itself or added to a difference of two other symbols. */ if (((GOT_symbol && GOT_symbol == exp.X_add_symbol) || (! GOT_symbol && name && strcmp (name, GLOBAL_OFFSET_TABLE_NAME) == 0)) && (exp.X_op == O_symbol || (exp.X_op == O_add && ((symbol_get_value_expression (exp.X_op_symbol)->X_op) == O_subtract)))) { reloc_howto_type *reloc_howto = bfd_reloc_type_lookup (stdoutput, BFD_RELOC_32); int size = bfd_get_reloc_size (reloc_howto); if (GOT_symbol == NULL) GOT_symbol = symbol_find_or_make (GLOBAL_OFFSET_TABLE_NAME); if (size > nbytes) as_bad (_("%s relocations do not fit in %d bytes\n"), reloc_howto->name, nbytes); else { register char *p = frag_more ((int) nbytes); int offset = nbytes - size; fix_new_exp (frag_now, p - frag_now->fr_literal + offset, size, &exp, 0, TC_RELOC_GLOBAL_OFFSET_TABLE); } } /* Check if this symbol involves one of the magic suffixes, such as @GOT, @GOTOFF or @PLT, and determine which relocation type to use. */ else if ((exp.X_op == O_symbol || (exp.X_op == O_add && exp.X_op_symbol)) && *input_line_pointer == '@' && ((reloc = sh_elf_suffix (&input_line_pointer, &exp, &new_exp)) != BFD_RELOC_UNUSED)) { reloc_howto_type *reloc_howto = bfd_reloc_type_lookup (stdoutput, reloc); int size = bfd_get_reloc_size (reloc_howto); /* Force a GOT to be generated. */ if (GOT_symbol == NULL) GOT_symbol = symbol_find_or_make (GLOBAL_OFFSET_TABLE_NAME); if (size > nbytes) as_bad (_("%s relocations do not fit in %d bytes\n"), reloc_howto->name, nbytes); else { register char *p = frag_more ((int) nbytes); int offset = nbytes - size; fix_new_exp (frag_now, p - frag_now->fr_literal + offset, size, &exp, 0, reloc); if (new_exp.X_op != O_absent) fix_new_exp (frag_now, p - frag_now->fr_literal + offset, size, &new_exp, 0, BFD_RELOC_32); } } else emit_expr (&exp, (unsigned int) nbytes); } while (*input_line_pointer++ == ','); input_line_pointer--; /* Put terminator back into stream. */ if (*input_line_pointer == '#' || *input_line_pointer == '!') { while (! is_end_of_line[(unsigned char) *input_line_pointer++]); } else demand_empty_rest_of_line (); } #endif /* OBJ_ELF */ /* This function is called once, at assembler startup time. This should set up all the tables, etc that the MD part of the assembler needs. */ void md_begin () { sh_opcode_info *opcode; char *prev_name = ""; int target_arch; #ifdef TE_PE /* The WinCE OS only supports little endian executables. */ target_big_endian = 0; #else if (! shl) target_big_endian = 1; #endif target_arch = arch_sh1_up & ~(sh_dsp ? arch_sh3e_up : arch_sh_dsp_up); valid_arch = target_arch; opcode_hash_control = hash_new (); /* Insert unique names into hash table. */ for (opcode = sh_table; opcode->name; opcode++) { if (strcmp (prev_name, opcode->name)) { if (! (opcode->arch & target_arch)) continue; prev_name = opcode->name; hash_insert (opcode_hash_control, opcode->name, (char *) opcode); } else { /* Make all the opcodes with the same name point to the same string. */ opcode->name = prev_name; } } } static int reg_m; static int reg_n; static int reg_x, reg_y; static int reg_efg; static int reg_b; #define IDENT_CHAR(c) (ISALNUM (c) || (c) == '_') /* Try to parse a reg name. Return the number of chars consumed. */ static int parse_reg (src, mode, reg) char *src; int *mode; int *reg; { char l0 = TOLOWER (src[0]); char l1 = l0 ? TOLOWER (src[1]) : 0; /* We use ! IDENT_CHAR for the next character after the register name, to make sure that we won't accidentally recognize a symbol name such as 'sram' or sr_ram as being a reference to the register 'sr'. */ if (l0 == 'r') { if (l1 == '1') { if (src[2] >= '0' && src[2] <= '5' && ! IDENT_CHAR ((unsigned char) src[3])) { *mode = A_REG_N; *reg = 10 + src[2] - '0'; return 3; } } if (l1 >= '0' && l1 <= '9' && ! IDENT_CHAR ((unsigned char) src[2])) { *mode = A_REG_N; *reg = (l1 - '0'); return 2; } if (l1 >= '0' && l1 <= '7' && strncasecmp (&src[2], "_bank", 5) == 0 && ! IDENT_CHAR ((unsigned char) src[7])) { *mode = A_REG_B; *reg = (l1 - '0'); return 7; } if (l1 == 'e' && ! IDENT_CHAR ((unsigned char) src[2])) { *mode = A_RE; return 2; } if (l1 == 's' && ! IDENT_CHAR ((unsigned char) src[2])) { *mode = A_RS; return 2; } } if (l0 == 'a') { if (l1 == '0') { if (! IDENT_CHAR ((unsigned char) src[2])) { *mode = DSP_REG_N; *reg = A_A0_NUM; return 2; } if (TOLOWER (src[2]) == 'g' && ! IDENT_CHAR ((unsigned char) src[3])) { *mode = DSP_REG_N; *reg = A_A0G_NUM; return 3; } } if (l1 == '1') { if (! IDENT_CHAR ((unsigned char) src[2])) { *mode = DSP_REG_N; *reg = A_A1_NUM; return 2; } if (TOLOWER (src[2]) == 'g' && ! IDENT_CHAR ((unsigned char) src[3])) { *mode = DSP_REG_N; *reg = A_A1G_NUM; return 3; } } if (l1 == 'x' && src[2] >= '0' && src[2] <= '1' && ! IDENT_CHAR ((unsigned char) src[3])) { *mode = A_REG_N; *reg = 4 + (l1 - '0'); return 3; } if (l1 == 'y' && src[2] >= '0' && src[2] <= '1' && ! IDENT_CHAR ((unsigned char) src[3])) { *mode = A_REG_N; *reg = 6 + (l1 - '0'); return 3; } if (l1 == 's' && src[2] >= '0' && src[2] <= '3' && ! IDENT_CHAR ((unsigned char) src[3])) { int n = l1 - '0'; *mode = A_REG_N; *reg = n | ((~n & 2) << 1); return 3; } } if (l0 == 'i' && l1 && ! IDENT_CHAR ((unsigned char) src[3])) { if (l1 == 's') { *mode = A_REG_N; *reg = 8; return 2; } if (l1 == 'x') { *mode = A_REG_N; *reg = 8; return 2; } if (l1 == 'y') { *mode = A_REG_N; *reg = 9; return 2; } } if (l0 == 'x' && l1 >= '0' && l1 <= '1' && ! IDENT_CHAR ((unsigned char) src[2])) { *mode = DSP_REG_N; *reg = A_X0_NUM + l1 - '0'; return 2; } if (l0 == 'y' && l1 >= '0' && l1 <= '1' && ! IDENT_CHAR ((unsigned char) src[2])) { *mode = DSP_REG_N; *reg = A_Y0_NUM + l1 - '0'; return 2; } if (l0 == 'm' && l1 >= '0' && l1 <= '1' && ! IDENT_CHAR ((unsigned char) src[2])) { *mode = DSP_REG_N; *reg = l1 == '0' ? A_M0_NUM : A_M1_NUM; return 2; } if (l0 == 's' && l1 == 's' && TOLOWER (src[2]) == 'r' && ! IDENT_CHAR ((unsigned char) src[3])) { *mode = A_SSR; return 3; } if (l0 == 's' && l1 == 'p' && TOLOWER (src[2]) == 'c' && ! IDENT_CHAR ((unsigned char) src[3])) { *mode = A_SPC; return 3; } if (l0 == 's' && l1 == 'g' && TOLOWER (src[2]) == 'r' && ! IDENT_CHAR ((unsigned char) src[3])) { *mode = A_SGR; return 3; } if (l0 == 'd' && l1 == 's' && TOLOWER (src[2]) == 'r' && ! IDENT_CHAR ((unsigned char) src[3])) { *mode = A_DSR; return 3; } if (l0 == 'd' && l1 == 'b' && TOLOWER (src[2]) == 'r' && ! IDENT_CHAR ((unsigned char) src[3])) { *mode = A_DBR; return 3; } if (l0 == 's' && l1 == 'r' && ! IDENT_CHAR ((unsigned char) src[2])) { *mode = A_SR; return 2; } if (l0 == 's' && l1 == 'p' && ! IDENT_CHAR ((unsigned char) src[2])) { *mode = A_REG_N; *reg = 15; return 2; } if (l0 == 'p' && l1 == 'r' && ! IDENT_CHAR ((unsigned char) src[2])) { *mode = A_PR; return 2; } if (l0 == 'p' && l1 == 'c' && ! IDENT_CHAR ((unsigned char) src[2])) { /* Don't use A_DISP_PC here - that would accept stuff like 'mova pc,r0' and use an uninitialized immediate. */ *mode = A_PC; return 2; } if (l0 == 'g' && l1 == 'b' && TOLOWER (src[2]) == 'r' && ! IDENT_CHAR ((unsigned char) src[3])) { *mode = A_GBR; return 3; } if (l0 == 'v' && l1 == 'b' && TOLOWER (src[2]) == 'r' && ! IDENT_CHAR ((unsigned char) src[3])) { *mode = A_VBR; return 3; } if (l0 == 'm' && l1 == 'a' && TOLOWER (src[2]) == 'c' && ! IDENT_CHAR ((unsigned char) src[4])) { if (TOLOWER (src[3]) == 'l') { *mode = A_MACL; return 4; } if (TOLOWER (src[3]) == 'h') { *mode = A_MACH; return 4; } } if (l0 == 'm' && l1 == 'o' && TOLOWER (src[2]) == 'd' && ! IDENT_CHAR ((unsigned char) src[4])) { *mode = A_MOD; return 3; } if (l0 == 'f' && l1 == 'r') { if (src[2] == '1') { if (src[3] >= '0' && src[3] <= '5' && ! IDENT_CHAR ((unsigned char) src[4])) { *mode = F_REG_N; *reg = 10 + src[3] - '0'; return 4; } } if (src[2] >= '0' && src[2] <= '9' && ! IDENT_CHAR ((unsigned char) src[3])) { *mode = F_REG_N; *reg = (src[2] - '0'); return 3; } } if (l0 == 'd' && l1 == 'r') { if (src[2] == '1') { if (src[3] >= '0' && src[3] <= '4' && ! ((src[3] - '0') & 1) && ! IDENT_CHAR ((unsigned char) src[4])) { *mode = D_REG_N; *reg = 10 + src[3] - '0'; return 4; } } if (src[2] >= '0' && src[2] <= '8' && ! ((src[2] - '0') & 1) && ! IDENT_CHAR ((unsigned char) src[3])) { *mode = D_REG_N; *reg = (src[2] - '0'); return 3; } } if (l0 == 'x' && l1 == 'd') { if (src[2] == '1') { if (src[3] >= '0' && src[3] <= '4' && ! ((src[3] - '0') & 1) && ! IDENT_CHAR ((unsigned char) src[4])) { *mode = X_REG_N; *reg = 11 + src[3] - '0'; return 4; } } if (src[2] >= '0' && src[2] <= '8' && ! ((src[2] - '0') & 1) && ! IDENT_CHAR ((unsigned char) src[3])) { *mode = X_REG_N; *reg = (src[2] - '0') + 1; return 3; } } if (l0 == 'f' && l1 == 'v') { if (src[2] == '1'&& src[3] == '2' && ! IDENT_CHAR ((unsigned char) src[4])) { *mode = V_REG_N; *reg = 12; return 4; } if ((src[2] == '0' || src[2] == '4' || src[2] == '8') && ! IDENT_CHAR ((unsigned char) src[3])) { *mode = V_REG_N; *reg = (src[2] - '0'); return 3; } } if (l0 == 'f' && l1 == 'p' && TOLOWER (src[2]) == 'u' && TOLOWER (src[3]) == 'l' && ! IDENT_CHAR ((unsigned char) src[4])) { *mode = FPUL_N; return 4; } if (l0 == 'f' && l1 == 'p' && TOLOWER (src[2]) == 's' && TOLOWER (src[3]) == 'c' && TOLOWER (src[4]) == 'r' && ! IDENT_CHAR ((unsigned char) src[5])) { *mode = FPSCR_N; return 5; } if (l0 == 'x' && l1 == 'm' && TOLOWER (src[2]) == 't' && TOLOWER (src[3]) == 'r' && TOLOWER (src[4]) == 'x' && ! IDENT_CHAR ((unsigned char) src[5])) { *mode = XMTRX_M4; return 5; } return 0; } static symbolS * dot () { const char *fake; /* JF: '.' is pseudo symbol with value of current location in current segment. */ fake = FAKE_LABEL_NAME; return symbol_new (fake, now_seg, (valueT) frag_now_fix (), frag_now); } static char * parse_exp (s, op) char *s; sh_operand_info *op; { char *save; char *new; save = input_line_pointer; input_line_pointer = s; expression (&op->immediate); if (op->immediate.X_op == O_absent) as_bad (_("missing operand")); new = input_line_pointer; input_line_pointer = save; return new; } /* The many forms of operand: Rn Register direct @Rn Register indirect @Rn+ Autoincrement @-Rn Autodecrement @(disp:4,Rn) @(disp:8,GBR) @(disp:8,PC) @(R0,Rn) @(R0,GBR) disp:8 disp:12 #imm8 pr, gbr, vbr, macl, mach */ static char * parse_at (src, op) char *src; sh_operand_info *op; { int len; int mode; src++; if (src[0] == '-') { /* Must be predecrement. */ src++; len = parse_reg (src, &mode, &(op->reg)); if (mode != A_REG_N) as_bad (_("illegal register after @-")); op->type = A_DEC_N; src += len; } else if (src[0] == '(') { /* Could be @(disp, rn), @(disp, gbr), @(disp, pc), @(r0, gbr) or @(r0, rn) */ src++; len = parse_reg (src, &mode, &(op->reg)); if (len && mode == A_REG_N) { src += len; if (op->reg != 0) { as_bad (_("must be @(r0,...)")); } if (src[0] == ',') src++; /* Now can be rn or gbr */ len = parse_reg (src, &mode, &(op->reg)); if (mode == A_GBR) { op->type = A_R0_GBR; } else if (mode == A_REG_N) { op->type = A_IND_R0_REG_N; } else { as_bad (_("syntax error in @(r0,...)")); } } else { /* Must be an @(disp,.. thing) */ src = parse_exp (src, op); if (src[0] == ',') src++; /* Now can be rn, gbr or pc */ len = parse_reg (src, &mode, &op->reg); if (len) { if (mode == A_REG_N) { op->type = A_DISP_REG_N; } else if (mode == A_GBR) { op->type = A_DISP_GBR; } else if (mode == A_PC) { /* Turn a plain @(4,pc) into @(.+4,pc). */ if (op->immediate.X_op == O_constant) { op->immediate.X_add_symbol = dot(); op->immediate.X_op = O_symbol; } op->type = A_DISP_PC; } else { as_bad (_("syntax error in @(disp,[Rn, gbr, pc])")); } } else { as_bad (_("syntax error in @(disp,[Rn, gbr, pc])")); } } src += len; if (src[0] != ')') as_bad (_("expecting )")); else src++; } else { src += parse_reg (src, &mode, &(op->reg)); if (mode != A_REG_N) { as_bad (_("illegal register after @")); } if (src[0] == '+') { src++; if ((src[0] == 'r' && src[1] == '8') || (src[0] == 'i' && (src[1] == 'x' || src[1] == 's'))) { src += 2; op->type = A_PMOD_N; } if ((src[0] == 'r' && src[1] == '9') || (src[0] == 'i' && src[1] == 'y')) { src += 2; op->type = A_PMODY_N; } else op->type = A_INC_N; } else { op->type = A_IND_N; } } return src; } static void get_operand (ptr, op) char **ptr; sh_operand_info *op; { char *src = *ptr; int mode = -1; unsigned int len; if (src[0] == '#') { src++; *ptr = parse_exp (src, op); op->type = A_IMM; return; } else if (src[0] == '@') { *ptr = parse_at (src, op); return; } len = parse_reg (src, &mode, &(op->reg)); if (len) { *ptr = src + len; op->type = mode; return; } else { /* Not a reg, the only thing left is a displacement. */ *ptr = parse_exp (src, op); op->type = A_DISP_PC; return; } } static char * get_operands (info, args, operand) sh_opcode_info *info; char *args; sh_operand_info *operand; { char *ptr = args; if (info->arg[0]) { /* The pre-processor will eliminate whitespace in front of '@' after the first argument; we may be called multiple times from assemble_ppi, so don't insist on finding whitespace here. */ if (*ptr == ' ') ptr++; get_operand (&ptr, operand + 0); if (info->arg[1]) { if (*ptr == ',') { ptr++; } get_operand (&ptr, operand + 1); /* ??? Hack: psha/pshl have a varying operand number depending on the type of the first operand. We handle this by having the three-operand version first and reducing the number of operands parsed to two if we see that the first operand is an immediate. This works because no insn with three operands has an immediate as first operand. */ if (info->arg[2] && operand[0].type != A_IMM) { if (*ptr == ',') { ptr++; } get_operand (&ptr, operand + 2); } else { operand[2].type = 0; } } else { operand[1].type = 0; operand[2].type = 0; } } else { operand[0].type = 0; operand[1].type = 0; operand[2].type = 0; } return ptr; } /* Passed a pointer to a list of opcodes which use different addressing modes, return the opcode which matches the opcodes provided. */ static sh_opcode_info * get_specific (opcode, operands) sh_opcode_info *opcode; sh_operand_info *operands; { sh_opcode_info *this_try = opcode; char *name = opcode->name; int n = 0; while (opcode->name) { this_try = opcode++; if (this_try->name != name) { /* We've looked so far down the table that we've run out of opcodes with the same name. */ return 0; } /* Look at both operands needed by the opcodes and provided by the user - since an arg test will often fail on the same arg again and again, we'll try and test the last failing arg the first on each opcode try. */ for (n = 0; this_try->arg[n]; n++) { sh_operand_info *user = operands + n; sh_arg_type arg = this_try->arg[n]; switch (arg) { case A_IMM: case A_BDISP12: case A_BDISP8: case A_DISP_GBR: case A_DISP_PC: case A_MACH: case A_PR: case A_MACL: if (user->type != arg) goto fail; break; case A_R0: /* opcode needs r0 */ if (user->type != A_REG_N || user->reg != 0) goto fail; break; case A_R0_GBR: if (user->type != A_R0_GBR || user->reg != 0) goto fail; break; case F_FR0: if (user->type != F_REG_N || user->reg != 0) goto fail; break; case A_REG_N: case A_INC_N: case A_DEC_N: case A_IND_N: case A_IND_R0_REG_N: case A_DISP_REG_N: case F_REG_N: case D_REG_N: case X_REG_N: case V_REG_N: case FPUL_N: case FPSCR_N: case A_PMOD_N: case A_PMODY_N: case DSP_REG_N: /* Opcode needs rn */ if (user->type != arg) goto fail; reg_n = user->reg; break; case DX_REG_N: if (user->type != D_REG_N && user->type != X_REG_N) goto fail; reg_n = user->reg; break; case A_GBR: case A_SR: case A_VBR: case A_DSR: case A_MOD: case A_RE: case A_RS: case A_SSR: case A_SPC: case A_SGR: case A_DBR: if (user->type != arg) goto fail; break; case A_REG_B: if (user->type != arg) goto fail; reg_b = user->reg; break; case A_REG_M: case A_INC_M: case A_DEC_M: case A_IND_M: case A_IND_R0_REG_M: case A_DISP_REG_M: case DSP_REG_M: /* Opcode needs rn */ if (user->type != arg - A_REG_M + A_REG_N) goto fail; reg_m = user->reg; break; case DSP_REG_X: if (user->type != DSP_REG_N) goto fail; switch (user->reg) { case A_X0_NUM: reg_x = 0; break; case A_X1_NUM: reg_x = 1; break; case A_A0_NUM: reg_x = 2; break; case A_A1_NUM: reg_x = 3; break; default: goto fail; } break; case DSP_REG_Y: if (user->type != DSP_REG_N) goto fail; switch (user->reg) { case A_Y0_NUM: reg_y = 0; break; case A_Y1_NUM: reg_y = 1; break; case A_M0_NUM: reg_y = 2; break; case A_M1_NUM: reg_y = 3; break; default: goto fail; } break; case DSP_REG_E: if (user->type != DSP_REG_N) goto fail; switch (user->reg) { case A_X0_NUM: reg_efg = 0 << 10; break; case A_X1_NUM: reg_efg = 1 << 10; break; case A_Y0_NUM: reg_efg = 2 << 10; break; case A_A1_NUM: reg_efg = 3 << 10; break; default: goto fail; } break; case DSP_REG_F: if (user->type != DSP_REG_N) goto fail; switch (user->reg) { case A_Y0_NUM: reg_efg |= 0 << 8; break; case A_Y1_NUM: reg_efg |= 1 << 8; break; case A_X0_NUM: reg_efg |= 2 << 8; break; case A_A1_NUM: reg_efg |= 3 << 8; break; default: goto fail; } break; case DSP_REG_G: if (user->type != DSP_REG_N) goto fail; switch (user->reg) { case A_M0_NUM: reg_efg |= 0 << 2; break; case A_M1_NUM: reg_efg |= 1 << 2; break; case A_A0_NUM: reg_efg |= 2 << 2; break; case A_A1_NUM: reg_efg |= 3 << 2; break; default: goto fail; } break; case A_A0: if (user->type != DSP_REG_N || user->reg != A_A0_NUM) goto fail; break; case A_X0: if (user->type != DSP_REG_N || user->reg != A_X0_NUM) goto fail; break; case A_X1: if (user->type != DSP_REG_N || user->reg != A_X1_NUM) goto fail; break; case A_Y0: if (user->type != DSP_REG_N || user->reg != A_Y0_NUM) goto fail; break; case A_Y1: if (user->type != DSP_REG_N || user->reg != A_Y1_NUM) goto fail; break; case F_REG_M: case D_REG_M: case X_REG_M: case V_REG_M: case FPUL_M: case FPSCR_M: /* Opcode needs rn */ if (user->type != arg - F_REG_M + F_REG_N) goto fail; reg_m = user->reg; break; case DX_REG_M: if (user->type != D_REG_N && user->type != X_REG_N) goto fail; reg_m = user->reg; break; case XMTRX_M4: if (user->type != XMTRX_M4) goto fail; reg_m = 4; break; default: printf (_("unhandled %d\n"), arg); goto fail; } } if ( !(valid_arch & this_try->arch)) goto fail; valid_arch &= this_try->arch; return this_try; fail: ; } return 0; } static void insert (where, how, pcrel, op) char *where; int how; int pcrel; sh_operand_info *op; { fix_new_exp (frag_now, where - frag_now->fr_literal, 2, &op->immediate, pcrel, how); } static void build_relax (opcode, op) sh_opcode_info *opcode; sh_operand_info *op; { int high_byte = target_big_endian ? 0 : 1; char *p; if (opcode->arg[0] == A_BDISP8) { int what = (opcode->nibbles[1] & 4) ? COND_JUMP_DELAY : COND_JUMP; p = frag_var (rs_machine_dependent, md_relax_table[C (what, COND32)].rlx_length, md_relax_table[C (what, COND8)].rlx_length, C (what, 0), op->immediate.X_add_symbol, op->immediate.X_add_number, 0); p[high_byte] = (opcode->nibbles[0] << 4) | (opcode->nibbles[1]); } else if (opcode->arg[0] == A_BDISP12) { p = frag_var (rs_machine_dependent, md_relax_table[C (UNCOND_JUMP, UNCOND32)].rlx_length, md_relax_table[C (UNCOND_JUMP, UNCOND12)].rlx_length, C (UNCOND_JUMP, 0), op->immediate.X_add_symbol, op->immediate.X_add_number, 0); p[high_byte] = (opcode->nibbles[0] << 4); } } /* Insert ldrs & ldre with fancy relocations that relaxation can recognize. */ static char * insert_loop_bounds (output, operand) char *output; sh_operand_info *operand; { char *name; symbolS *end_sym; /* Since the low byte of the opcode will be overwritten by the reloc, we can just stash the high byte into both bytes and ignore endianness. */ output[0] = 0x8c; output[1] = 0x8c; insert (output, BFD_RELOC_SH_LOOP_START, 1, operand); insert (output, BFD_RELOC_SH_LOOP_END, 1, operand + 1); if (sh_relax) { static int count = 0; /* If the last loop insn is a two-byte-insn, it is in danger of being swapped with the insn after it. To prevent this, create a new symbol - complete with SH_LABEL reloc - after the last loop insn. If the last loop insn is four bytes long, the symbol will be right in the middle, but four byte insns are not swapped anyways. */ /* A REPEAT takes 6 bytes. The SH has a 32 bit address space. Hence a 9 digit number should be enough to count all REPEATs. */ name = alloca (11); sprintf (name, "_R%x", count++ & 0x3fffffff); end_sym = symbol_new (name, undefined_section, 0, &zero_address_frag); /* Make this a local symbol. */ #ifdef OBJ_COFF SF_SET_LOCAL (end_sym); #endif /* OBJ_COFF */ symbol_table_insert (end_sym); end_sym->sy_value = operand[1].immediate; end_sym->sy_value.X_add_number += 2; fix_new (frag_now, frag_now_fix (), 2, end_sym, 0, 1, BFD_RELOC_SH_LABEL); } output = frag_more (2); output[0] = 0x8e; output[1] = 0x8e; insert (output, BFD_RELOC_SH_LOOP_START, 1, operand); insert (output, BFD_RELOC_SH_LOOP_END, 1, operand + 1); return frag_more (2); } /* Now we know what sort of opcodes it is, let's build the bytes. */ static unsigned int build_Mytes (opcode, operand) sh_opcode_info *opcode; sh_operand_info *operand; { int index; char nbuf[4]; char *output = frag_more (2); unsigned int size = 2; int low_byte = target_big_endian ? 1 : 0; nbuf[0] = 0; nbuf[1] = 0; nbuf[2] = 0; nbuf[3] = 0; for (index = 0; index < 4; index++) { sh_nibble_type i = opcode->nibbles[index]; if (i < 16) { nbuf[index] = i; } else { switch (i) { case REG_N: nbuf[index] = reg_n; break; case REG_M: nbuf[index] = reg_m; break; case SDT_REG_N: if (reg_n < 2 || reg_n > 5) as_bad (_("Invalid register: 'r%d'"), reg_n); nbuf[index] = (reg_n & 3) | 4; break; case REG_NM: nbuf[index] = reg_n | (reg_m >> 2); break; case REG_B: nbuf[index] = reg_b | 0x08; break; case IMM0_4BY4: insert (output + low_byte, BFD_RELOC_SH_IMM4BY4, 0, operand); break; case IMM0_4BY2: insert (output + low_byte, BFD_RELOC_SH_IMM4BY2, 0, operand); break; case IMM0_4: insert (output + low_byte, BFD_RELOC_SH_IMM4, 0, operand); break; case IMM1_4BY4: insert (output + low_byte, BFD_RELOC_SH_IMM4BY4, 0, operand + 1); break; case IMM1_4BY2: insert (output + low_byte, BFD_RELOC_SH_IMM4BY2, 0, operand + 1); break; case IMM1_4: insert (output + low_byte, BFD_RELOC_SH_IMM4, 0, operand + 1); break; case IMM0_8BY4: insert (output + low_byte, BFD_RELOC_SH_IMM8BY4, 0, operand); break; case IMM0_8BY2: insert (output + low_byte, BFD_RELOC_SH_IMM8BY2, 0, operand); break; case IMM0_8: insert (output + low_byte, BFD_RELOC_SH_IMM8, 0, operand); break; case IMM1_8BY4: insert (output + low_byte, BFD_RELOC_SH_IMM8BY4, 0, operand + 1); break; case IMM1_8BY2: insert (output + low_byte, BFD_RELOC_SH_IMM8BY2, 0, operand + 1); break; case IMM1_8: insert (output + low_byte, BFD_RELOC_SH_IMM8, 0, operand + 1); break; case PCRELIMM_8BY4: insert (output, BFD_RELOC_SH_PCRELIMM8BY4, 1, operand); break; case PCRELIMM_8BY2: insert (output, BFD_RELOC_SH_PCRELIMM8BY2, 1, operand); break; case REPEAT: output = insert_loop_bounds (output, operand); nbuf[index] = opcode->nibbles[3]; operand += 2; break; default: printf (_("failed for %d\n"), i); } } } if (!target_big_endian) { output[1] = (nbuf[0] << 4) | (nbuf[1]); output[0] = (nbuf[2] << 4) | (nbuf[3]); } else { output[0] = (nbuf[0] << 4) | (nbuf[1]); output[1] = (nbuf[2] << 4) | (nbuf[3]); } return size; } /* Find an opcode at the start of *STR_P in the hash table, and set *STR_P to the first character after the last one read. */ static sh_opcode_info * find_cooked_opcode (str_p) char **str_p; { char *str = *str_p; unsigned char *op_start; unsigned char *op_end; char name[20]; int nlen = 0; /* Drop leading whitespace. */ while (*str == ' ') str++; /* Find the op code end. The pre-processor will eliminate whitespace in front of any '@' after the first argument; we may be called from assemble_ppi, so the opcode might be terminated by an '@'. */ for (op_start = op_end = (unsigned char *) (str); *op_end && nlen < 20 && !is_end_of_line[*op_end] && *op_end != ' ' && *op_end != '@'; op_end++) { unsigned char c = op_start[nlen]; /* The machine independent code will convert CMP/EQ into cmp/EQ because it thinks the '/' is the end of the symbol. Moreover, all but the first sub-insn is a parallel processing insn won't be capitalized. Instead of hacking up the machine independent code, we just deal with it here. */ c = TOLOWER (c); name[nlen] = c; nlen++; } name[nlen] = 0; *str_p = op_end; if (nlen == 0) as_bad (_("can't find opcode ")); return (sh_opcode_info *) hash_find (opcode_hash_control, name); } /* Assemble a parallel processing insn. */ #define DDT_BASE 0xf000 /* Base value for double data transfer insns */ static unsigned int assemble_ppi (op_end, opcode) char *op_end; sh_opcode_info *opcode; { int movx = 0; int movy = 0; int cond = 0; int field_b = 0; char *output; int move_code; unsigned int size; /* Some insn ignore one or more register fields, e.g. psts machl,a0. Make sure we encode a defined insn pattern. */ reg_x = 0; reg_y = 0; for (;;) { sh_operand_info operand[3]; if (opcode->arg[0] != A_END) op_end = get_operands (opcode, op_end, operand); opcode = get_specific (opcode, operand); if (opcode == 0) { /* Couldn't find an opcode which matched the operands. */ char *where = frag_more (2); size = 2; where[0] = 0x0; where[1] = 0x0; as_bad (_("invalid operands for opcode")); return size; } if (opcode->nibbles[0] != PPI) as_bad (_("insn can't be combined with parallel processing insn")); switch (opcode->nibbles[1]) { case NOPX: if (movx) as_bad (_("multiple movx specifications")); movx = DDT_BASE; break; case NOPY: if (movy) as_bad (_("multiple movy specifications")); movy = DDT_BASE; break; case MOVX: if (movx) as_bad (_("multiple movx specifications")); if (reg_n < 4 || reg_n > 5) as_bad (_("invalid movx address register")); if (opcode->nibbles[2] & 8) { if (reg_m == A_A1_NUM) movx = 1 << 7; else if (reg_m != A_A0_NUM) as_bad (_("invalid movx dsp register")); } else { if (reg_x > 1) as_bad (_("invalid movx dsp register")); movx = reg_x << 7; } movx += ((reg_n - 4) << 9) + (opcode->nibbles[2] << 2) + DDT_BASE; break; case MOVY: if (movy) as_bad (_("multiple movy specifications")); if (opcode->nibbles[2] & 8) { /* Bit 3 in nibbles[2] is intended for bit 4 of the opcode, so add 8 more. */ movy = 8; if (reg_m == A_A1_NUM) movy += 1 << 6; else if (reg_m != A_A0_NUM) as_bad (_("invalid movy dsp register")); } else { if (reg_y > 1) as_bad (_("invalid movy dsp register")); movy = reg_y << 6; } if (reg_n < 6 || reg_n > 7) as_bad (_("invalid movy address register")); movy += ((reg_n - 6) << 8) + opcode->nibbles[2] + DDT_BASE; break; case PSH: if (operand[0].immediate.X_op != O_constant) as_bad (_("dsp immediate shift value not constant")); field_b = ((opcode->nibbles[2] << 12) | (operand[0].immediate.X_add_number & 127) << 4 | reg_n); break; case PPI3: if (field_b) as_bad (_("multiple parallel processing specifications")); field_b = ((opcode->nibbles[2] << 12) + (opcode->nibbles[3] << 8) + (reg_x << 6) + (reg_y << 4) + reg_n); break; case PDC: if (cond) as_bad (_("multiple condition specifications")); cond = opcode->nibbles[2] << 8; if (*op_end) goto skip_cond_check; break; case PPIC: if (field_b) as_bad (_("multiple parallel processing specifications")); field_b = ((opcode->nibbles[2] << 12) + (opcode->nibbles[3] << 8) + cond + (reg_x << 6) + (reg_y << 4) + reg_n); cond = 0; break; case PMUL: if (field_b) { if ((field_b & 0xef00) != 0xa100) as_bad (_("insn cannot be combined with pmuls")); field_b -= 0x8100; switch (field_b & 0xf) { case A_X0_NUM: field_b += 0 - A_X0_NUM; break; case A_Y0_NUM: field_b += 1 - A_Y0_NUM; break; case A_A0_NUM: field_b += 2 - A_A0_NUM; break; case A_A1_NUM: field_b += 3 - A_A1_NUM; break; default: as_bad (_("bad padd / psub pmuls output operand")); } } field_b += 0x4000 + reg_efg; break; default: abort (); } if (cond) { as_bad (_("condition not followed by conditionalizable insn")); cond = 0; } if (! *op_end) break; skip_cond_check: opcode = find_cooked_opcode (&op_end); if (opcode == NULL) { (as_bad (_("unrecognized characters at end of parallel processing insn"))); break; } } move_code = movx | movy; if (field_b) { /* Parallel processing insn. */ unsigned long ppi_code = (movx | movy | 0xf800) << 16 | field_b; output = frag_more (4); size = 4; if (! target_big_endian) { output[3] = ppi_code >> 8; output[2] = ppi_code; } else { output[2] = ppi_code >> 8; output[3] = ppi_code; } move_code |= 0xf800; } else { /* Just a double data transfer. */ output = frag_more (2); size = 2; } if (! target_big_endian) { output[1] = move_code >> 8; output[0] = move_code; } else { output[0] = move_code >> 8; output[1] = move_code; } return size; } /* This is the guts of the machine-dependent assembler. STR points to a machine dependent instruction. This function is supposed to emit the frags/bytes it assembles to. */ void md_assemble (str) char *str; { unsigned char *op_end; sh_operand_info operand[3]; sh_opcode_info *opcode; unsigned int size = 0; opcode = find_cooked_opcode (&str); op_end = str; if (opcode == NULL) { as_bad (_("unknown opcode")); return; } if (sh_relax && ! seg_info (now_seg)->tc_segment_info_data.in_code) { /* Output a CODE reloc to tell the linker that the following bytes are instructions, not data. */ fix_new (frag_now, frag_now_fix (), 2, &abs_symbol, 0, 0, BFD_RELOC_SH_CODE); seg_info (now_seg)->tc_segment_info_data.in_code = 1; } if (opcode->nibbles[0] == PPI) { size = assemble_ppi (op_end, opcode); } else { if (opcode->arg[0] == A_BDISP12 || opcode->arg[0] == A_BDISP8) { parse_exp (op_end + 1, &operand[0]); build_relax (opcode, &operand[0]); } else { if (opcode->arg[0] == A_END) { /* Ignore trailing whitespace. If there is any, it has already been compressed to a single space. */ if (*op_end == ' ') op_end++; } else { op_end = get_operands (opcode, op_end, operand); } opcode = get_specific (opcode, operand); if (opcode == 0) { /* Couldn't find an opcode which matched the operands. */ char *where = frag_more (2); size = 2; where[0] = 0x0; where[1] = 0x0; as_bad (_("invalid operands for opcode")); } else { if (*op_end) as_bad (_("excess operands: '%s'"), op_end); size = build_Mytes (opcode, operand); } } } #ifdef BFD_ASSEMBLER dwarf2_emit_insn (size); #endif } /* This routine is called each time a label definition is seen. It emits a BFD_RELOC_SH_LABEL reloc if necessary. */ void sh_frob_label () { static fragS *last_label_frag; static int last_label_offset; if (sh_relax && seg_info (now_seg)->tc_segment_info_data.in_code) { int offset; offset = frag_now_fix (); if (frag_now != last_label_frag || offset != last_label_offset) { fix_new (frag_now, offset, 2, &abs_symbol, 0, 0, BFD_RELOC_SH_LABEL); last_label_frag = frag_now; last_label_offset = offset; } } } /* This routine is called when the assembler is about to output some data. It emits a BFD_RELOC_SH_DATA reloc if necessary. */ void sh_flush_pending_output () { if (sh_relax && seg_info (now_seg)->tc_segment_info_data.in_code) { fix_new (frag_now, frag_now_fix (), 2, &abs_symbol, 0, 0, BFD_RELOC_SH_DATA); seg_info (now_seg)->tc_segment_info_data.in_code = 0; } } symbolS * md_undefined_symbol (name) char *name; { #ifdef OBJ_ELF /* Under ELF we need to default _GLOBAL_OFFSET_TABLE. Otherwise we have no need to default values of symbols. */ if (strcmp (name, GLOBAL_OFFSET_TABLE_NAME) == 0) { if (!GOT_symbol) { if (symbol_find (name)) as_bad ("GOT already in the symbol table"); GOT_symbol = symbol_new (name, undefined_section, (valueT)0, & zero_address_frag); } return GOT_symbol; } #endif /* OBJ_ELF */ return 0; } #ifdef OBJ_COFF #ifndef BFD_ASSEMBLER void tc_crawl_symbol_chain (headers) object_headers *headers; { printf (_("call to tc_crawl_symbol_chain \n")); } void tc_headers_hook (headers) object_headers *headers; { printf (_("call to tc_headers_hook \n")); } #endif #endif /* Various routines to kill one day. */ /* Equal to MAX_PRECISION in atof-ieee.c. */ #define MAX_LITTLENUMS 6 /* Turn a string in input_line_pointer into a floating point constant of type TYPE, and store the appropriate bytes in *LITP. The number of LITTLENUMS emitted is stored in *SIZEP . An error message is returned, or NULL on OK. */ char * md_atof (type, litP, sizeP) int type; char *litP; int *sizeP; { int prec; LITTLENUM_TYPE words[4]; char *t; int i; switch (type) { case 'f': prec = 2; break; case 'd': prec = 4; break; default: *sizeP = 0; return _("bad call to md_atof"); } t = atof_ieee (input_line_pointer, type, words); if (t) input_line_pointer = t; *sizeP = prec * 2; if (! target_big_endian) { for (i = prec - 1; i >= 0; i--) { md_number_to_chars (litP, (valueT) words[i], 2); litP += 2; } } else { for (i = 0; i < prec; i++) { md_number_to_chars (litP, (valueT) words[i], 2); litP += 2; } } return NULL; } /* Handle the .uses pseudo-op. This pseudo-op is used just before a call instruction. It refers to a label of the instruction which loads the register which the call uses. We use it to generate a special reloc for the linker. */ static void s_uses (ignore) int ignore ATTRIBUTE_UNUSED; { expressionS ex; if (! sh_relax) as_warn (_(".uses pseudo-op seen when not relaxing")); expression (&ex); if (ex.X_op != O_symbol || ex.X_add_number != 0) { as_bad (_("bad .uses format")); ignore_rest_of_line (); return; } fix_new_exp (frag_now, frag_now_fix (), 2, &ex, 1, BFD_RELOC_SH_USES); demand_empty_rest_of_line (); } CONST char *md_shortopts = ""; struct option md_longopts[] = { #define OPTION_RELAX (OPTION_MD_BASE) #define OPTION_LITTLE (OPTION_MD_BASE + 1) #define OPTION_SMALL (OPTION_LITTLE + 1) #define OPTION_DSP (OPTION_SMALL + 1) {"relax", no_argument, NULL, OPTION_RELAX}, {"little", no_argument, NULL, OPTION_LITTLE}, {"small", no_argument, NULL, OPTION_SMALL}, {"dsp", no_argument, NULL, OPTION_DSP}, {NULL, no_argument, NULL, 0} }; size_t md_longopts_size = sizeof (md_longopts); int md_parse_option (c, arg) int c; char *arg ATTRIBUTE_UNUSED; { switch (c) { case OPTION_RELAX: sh_relax = 1; break; case OPTION_LITTLE: shl = 1; target_big_endian = 0; break; case OPTION_SMALL: sh_small = 1; break; case OPTION_DSP: sh_dsp = 1; break; default: return 0; } return 1; } void md_show_usage (stream) FILE *stream; { fprintf (stream, _("\ SH options:\n\ -little generate little endian code\n\ -relax alter jump instructions for long displacements\n\ -small align sections to 4 byte boundaries, not 16\n\ -dsp enable sh-dsp insns, and disable sh3e / sh4 insns.\n")); } /* This struct is used to pass arguments to sh_count_relocs through bfd_map_over_sections. */ struct sh_count_relocs { /* Symbol we are looking for. */ symbolS *sym; /* Count of relocs found. */ int count; }; /* Count the number of fixups in a section which refer to a particular symbol. When using BFD_ASSEMBLER, this is called via bfd_map_over_sections. */ static void sh_count_relocs (abfd, sec, data) bfd *abfd ATTRIBUTE_UNUSED; segT sec; PTR data; { struct sh_count_relocs *info = (struct sh_count_relocs *) data; segment_info_type *seginfo; symbolS *sym; fixS *fix; seginfo = seg_info (sec); if (seginfo == NULL) return; sym = info->sym; for (fix = seginfo->fix_root; fix != NULL; fix = fix->fx_next) { if (fix->fx_addsy == sym) { ++info->count; fix->fx_tcbit = 1; } } } /* Handle the count relocs for a particular section. When using BFD_ASSEMBLER, this is called via bfd_map_over_sections. */ static void sh_frob_section (abfd, sec, ignore) bfd *abfd ATTRIBUTE_UNUSED; segT sec; PTR ignore ATTRIBUTE_UNUSED; { segment_info_type *seginfo; fixS *fix; seginfo = seg_info (sec); if (seginfo == NULL) return; for (fix = seginfo->fix_root; fix != NULL; fix = fix->fx_next) { symbolS *sym; bfd_vma val; fixS *fscan; struct sh_count_relocs info; if (fix->fx_r_type != BFD_RELOC_SH_USES) continue; /* The BFD_RELOC_SH_USES reloc should refer to a defined local symbol in the same section. */ sym = fix->fx_addsy; if (sym == NULL || fix->fx_subsy != NULL || fix->fx_addnumber != 0 || S_GET_SEGMENT (sym) != sec #if ! defined (BFD_ASSEMBLER) && defined (OBJ_COFF) || S_GET_STORAGE_CLASS (sym) == C_EXT #endif || S_IS_EXTERNAL (sym)) { as_warn_where (fix->fx_file, fix->fx_line, _(".uses does not refer to a local symbol in the same section")); continue; } /* Look through the fixups again, this time looking for one at the same location as sym. */ val = S_GET_VALUE (sym); for (fscan = seginfo->fix_root; fscan != NULL; fscan = fscan->fx_next) if (val == fscan->fx_frag->fr_address + fscan->fx_where && fscan->fx_r_type != BFD_RELOC_SH_ALIGN && fscan->fx_r_type != BFD_RELOC_SH_CODE && fscan->fx_r_type != BFD_RELOC_SH_DATA && fscan->fx_r_type != BFD_RELOC_SH_LABEL) break; if (fscan == NULL) { as_warn_where (fix->fx_file, fix->fx_line, _("can't find fixup pointed to by .uses")); continue; } if (fscan->fx_tcbit) { /* We've already done this one. */ continue; } /* The variable fscan should also be a fixup to a local symbol in the same section. */ sym = fscan->fx_addsy; if (sym == NULL || fscan->fx_subsy != NULL || fscan->fx_addnumber != 0 || S_GET_SEGMENT (sym) != sec #if ! defined (BFD_ASSEMBLER) && defined (OBJ_COFF) || S_GET_STORAGE_CLASS (sym) == C_EXT #endif || S_IS_EXTERNAL (sym)) { as_warn_where (fix->fx_file, fix->fx_line, _(".uses target does not refer to a local symbol in the same section")); continue; } /* Now we look through all the fixups of all the sections, counting the number of times we find a reference to sym. */ info.sym = sym; info.count = 0; #ifdef BFD_ASSEMBLER bfd_map_over_sections (stdoutput, sh_count_relocs, (PTR) &info); #else { int iscan; for (iscan = SEG_E0; iscan < SEG_UNKNOWN; iscan++) sh_count_relocs ((bfd *) NULL, iscan, (PTR) &info); } #endif if (info.count < 1) abort (); /* Generate a BFD_RELOC_SH_COUNT fixup at the location of sym. We have already adjusted the value of sym to include the fragment address, so we undo that adjustment here. */ subseg_change (sec, 0); fix_new (fscan->fx_frag, S_GET_VALUE (sym) - fscan->fx_frag->fr_address, 4, &abs_symbol, info.count, 0, BFD_RELOC_SH_COUNT); } } /* This function is called after the symbol table has been completed, but before the relocs or section contents have been written out. If we have seen any .uses pseudo-ops, they point to an instruction which loads a register with the address of a function. We look through the fixups to find where the function address is being loaded from. We then generate a COUNT reloc giving the number of times that function address is referred to. The linker uses this information when doing relaxing, to decide when it can eliminate the stored function address entirely. */ void sh_frob_file () { if (! sh_relax) return; #ifdef BFD_ASSEMBLER bfd_map_over_sections (stdoutput, sh_frob_section, (PTR) NULL); #else { int iseg; for (iseg = SEG_E0; iseg < SEG_UNKNOWN; iseg++) sh_frob_section ((bfd *) NULL, iseg, (PTR) NULL); } #endif } /* Called after relaxing. Set the correct sizes of the fragments, and create relocs so that md_apply_fix will fill in the correct values. */ void md_convert_frag (headers, seg, fragP) #ifdef BFD_ASSEMBLER bfd *headers ATTRIBUTE_UNUSED; #else object_headers *headers; #endif segT seg; fragS *fragP; { int donerelax = 0; switch (fragP->fr_subtype) { case C (COND_JUMP, COND8): case C (COND_JUMP_DELAY, COND8): subseg_change (seg, 0); fix_new (fragP, fragP->fr_fix, 2, fragP->fr_symbol, fragP->fr_offset, 1, BFD_RELOC_SH_PCDISP8BY2); fragP->fr_fix += 2; fragP->fr_var = 0; break; case C (UNCOND_JUMP, UNCOND12): subseg_change (seg, 0); fix_new (fragP, fragP->fr_fix, 2, fragP->fr_symbol, fragP->fr_offset, 1, BFD_RELOC_SH_PCDISP12BY2); fragP->fr_fix += 2; fragP->fr_var = 0; break; case C (UNCOND_JUMP, UNCOND32): case C (UNCOND_JUMP, UNDEF_WORD_DISP): if (fragP->fr_symbol == NULL) as_bad_where (fragP->fr_file, fragP->fr_line, _("displacement overflows 12-bit field")); else if (S_IS_DEFINED (fragP->fr_symbol)) as_bad_where (fragP->fr_file, fragP->fr_line, _("displacement to defined symbol %s overflows 12-bit field"), S_GET_NAME (fragP->fr_symbol)); else as_bad_where (fragP->fr_file, fragP->fr_line, _("displacement to undefined symbol %s overflows 12-bit field"), S_GET_NAME (fragP->fr_symbol)); /* Stabilize this frag, so we don't trip an assert. */ fragP->fr_fix += fragP->fr_var; fragP->fr_var = 0; break; case C (COND_JUMP, COND12): case C (COND_JUMP_DELAY, COND12): /* A bcond won't fit, so turn it into a b!cond; bra disp; nop. */ /* I found that a relax failure for gcc.c-torture/execute/930628-1.c was due to gas incorrectly relaxing an out-of-range conditional branch with delay slot. It turned: bf.s L6 (slot mov.l r12,@(44,r0)) into: 2c: 8f 01 a0 8b bf.s 32 <_main+32> (slot bra L6) 30: 00 09 nop 32: 10 cb mov.l r12,@(44,r0) Therefore, branches with delay slots have to be handled differently from ones without delay slots. */ { unsigned char *buffer = (unsigned char *) (fragP->fr_fix + fragP->fr_literal); int highbyte = target_big_endian ? 0 : 1; int lowbyte = target_big_endian ? 1 : 0; int delay = fragP->fr_subtype == C (COND_JUMP_DELAY, COND12); /* Toggle the true/false bit of the bcond. */ buffer[highbyte] ^= 0x2; /* If this is a dalayed branch, we may not put the bra in the slot. So we change it to a non-delayed branch, like that: b! cond slot_label; bra disp; slot_label: slot_insn ??? We should try if swapping the conditional branch and its delay-slot insn already makes the branch reach. */ /* Build a relocation to six / four bytes farther on. */ subseg_change (seg, 0); fix_new (fragP, fragP->fr_fix, 2, #ifdef BFD_ASSEMBLER section_symbol (seg), #else seg_info (seg)->dot, #endif fragP->fr_address + fragP->fr_fix + (delay ? 4 : 6), 1, BFD_RELOC_SH_PCDISP8BY2); /* Set up a jump instruction. */ buffer[highbyte + 2] = 0xa0; buffer[lowbyte + 2] = 0; fix_new (fragP, fragP->fr_fix + 2, 2, fragP->fr_symbol, fragP->fr_offset, 1, BFD_RELOC_SH_PCDISP12BY2); if (delay) { buffer[highbyte] &= ~0x4; /* Removes delay slot from branch. */ fragP->fr_fix += 4; } else { /* Fill in a NOP instruction. */ buffer[highbyte + 4] = 0x0; buffer[lowbyte + 4] = 0x9; fragP->fr_fix += 6; } fragP->fr_var = 0; donerelax = 1; } break; case C (COND_JUMP, COND32): case C (COND_JUMP_DELAY, COND32): case C (COND_JUMP, UNDEF_WORD_DISP): case C (COND_JUMP_DELAY, UNDEF_WORD_DISP): if (fragP->fr_symbol == NULL) as_bad_where (fragP->fr_file, fragP->fr_line, _("displacement overflows 8-bit field")); else if (S_IS_DEFINED (fragP->fr_symbol)) as_bad_where (fragP->fr_file, fragP->fr_line, _("displacement to defined symbol %s overflows 8-bit field"), S_GET_NAME (fragP->fr_symbol)); else as_bad_where (fragP->fr_file, fragP->fr_line, _("displacement to undefined symbol %s overflows 8-bit field "), S_GET_NAME (fragP->fr_symbol)); /* Stabilize this frag, so we don't trip an assert. */ fragP->fr_fix += fragP->fr_var; fragP->fr_var = 0; break; default: abort (); } if (donerelax && !sh_relax) as_warn_where (fragP->fr_file, fragP->fr_line, _("overflow in branch to %s; converted into longer instruction sequence"), (fragP->fr_symbol != NULL ? S_GET_NAME (fragP->fr_symbol) : "")); } valueT md_section_align (seg, size) segT seg ATTRIBUTE_UNUSED; valueT size; { #ifdef BFD_ASSEMBLER #ifdef OBJ_ELF return size; #else /* ! OBJ_ELF */ return ((size + (1 << bfd_get_section_alignment (stdoutput, seg)) - 1) & (-1 << bfd_get_section_alignment (stdoutput, seg))); #endif /* ! OBJ_ELF */ #else /* ! BFD_ASSEMBLER */ return ((size + (1 << section_alignment[(int) seg]) - 1) & (-1 << section_alignment[(int) seg])); #endif /* ! BFD_ASSEMBLER */ } /* This static variable is set by s_uacons to tell sh_cons_align that the expession does not need to be aligned. */ static int sh_no_align_cons = 0; /* This handles the unaligned space allocation pseudo-ops, such as .uaword. .uaword is just like .word, but the value does not need to be aligned. */ static void s_uacons (bytes) int bytes; { /* Tell sh_cons_align not to align this value. */ sh_no_align_cons = 1; cons (bytes); } /* If a .word, et. al., pseud-op is seen, warn if the value is not aligned correctly. Note that this can cause warnings to be issued when assembling initialized structured which were declared with the packed attribute. FIXME: Perhaps we should require an option to enable this warning? */ void sh_cons_align (nbytes) int nbytes; { int nalign; char *p; if (sh_no_align_cons) { /* This is an unaligned pseudo-op. */ sh_no_align_cons = 0; return; } nalign = 0; while ((nbytes & 1) == 0) { ++nalign; nbytes >>= 1; } if (nalign == 0) return; if (now_seg == absolute_section) { if ((abs_section_offset & ((1 << nalign) - 1)) != 0) as_warn (_("misaligned data")); return; } p = frag_var (rs_align_test, 1, 1, (relax_substateT) 0, (symbolS *) NULL, (offsetT) nalign, (char *) NULL); record_alignment (now_seg, nalign); } /* When relaxing, we need to output a reloc for any .align directive that requests alignment to a four byte boundary or larger. This is also where we check for misaligned data. */ void sh_handle_align (frag) fragS *frag; { int bytes = frag->fr_next->fr_address - frag->fr_address - frag->fr_fix; if (frag->fr_type == rs_align_code) { static const unsigned char big_nop_pattern[] = { 0x00, 0x09 }; static const unsigned char little_nop_pattern[] = { 0x09, 0x00 }; char *p = frag->fr_literal + frag->fr_fix; if (bytes & 1) { *p++ = 0; bytes--; frag->fr_fix += 1; } if (target_big_endian) { memcpy (p, big_nop_pattern, sizeof big_nop_pattern); frag->fr_var = sizeof big_nop_pattern; } else { memcpy (p, little_nop_pattern, sizeof little_nop_pattern); frag->fr_var = sizeof little_nop_pattern; } } else if (frag->fr_type == rs_align_test) { if (bytes != 0) as_warn_where (frag->fr_file, frag->fr_line, _("misaligned data")); } if (sh_relax && (frag->fr_type == rs_align || frag->fr_type == rs_align_code) && frag->fr_address + frag->fr_fix > 0 && frag->fr_offset > 1 && now_seg != bss_section) fix_new (frag, frag->fr_fix, 2, &abs_symbol, frag->fr_offset, 0, BFD_RELOC_SH_ALIGN); } /* This macro decides whether a particular reloc is an entry in a switch table. It is used when relaxing, because the linker needs to know about all such entries so that it can adjust them if necessary. */ #ifdef BFD_ASSEMBLER #define SWITCH_TABLE_CONS(fix) (0) #else #define SWITCH_TABLE_CONS(fix) \ ((fix)->fx_r_type == 0 \ && ((fix)->fx_size == 2 \ || (fix)->fx_size == 1 \ || (fix)->fx_size == 4)) #endif #define SWITCH_TABLE(fix) \ ((fix)->fx_addsy != NULL \ && (fix)->fx_subsy != NULL \ && S_GET_SEGMENT ((fix)->fx_addsy) == text_section \ && S_GET_SEGMENT ((fix)->fx_subsy) == text_section \ && ((fix)->fx_r_type == BFD_RELOC_32 \ || (fix)->fx_r_type == BFD_RELOC_16 \ || (fix)->fx_r_type == BFD_RELOC_8 \ || SWITCH_TABLE_CONS (fix))) /* See whether we need to force a relocation into the output file. This is used to force out switch and PC relative relocations when relaxing. */ int sh_force_relocation (fix) fixS *fix; { if (fix->fx_r_type == BFD_RELOC_VTABLE_INHERIT || fix->fx_r_type == BFD_RELOC_VTABLE_ENTRY || fix->fx_r_type == BFD_RELOC_SH_LOOP_START || fix->fx_r_type == BFD_RELOC_SH_LOOP_END) return 1; if (! sh_relax) return 0; return (fix->fx_pcrel || SWITCH_TABLE (fix) || fix->fx_r_type == BFD_RELOC_SH_COUNT || fix->fx_r_type == BFD_RELOC_SH_ALIGN || fix->fx_r_type == BFD_RELOC_SH_CODE || fix->fx_r_type == BFD_RELOC_SH_DATA || fix->fx_r_type == BFD_RELOC_SH_LABEL); } #ifdef OBJ_ELF boolean sh_fix_adjustable (fixP) fixS *fixP; { if (fixP->fx_addsy == NULL) return 1; if (fixP->fx_r_type == BFD_RELOC_SH_PCDISP8BY2 || fixP->fx_r_type == BFD_RELOC_SH_PCDISP12BY2 || fixP->fx_r_type == BFD_RELOC_SH_PCRELIMM8BY2 || fixP->fx_r_type == BFD_RELOC_SH_PCRELIMM8BY4 || fixP->fx_r_type == BFD_RELOC_8_PCREL || fixP->fx_r_type == BFD_RELOC_SH_SWITCH16 || fixP->fx_r_type == BFD_RELOC_SH_SWITCH32) return 1; if (! TC_RELOC_RTSYM_LOC_FIXUP (fixP) || fixP->fx_r_type == BFD_RELOC_32_GOTOFF || fixP->fx_r_type == BFD_RELOC_RVA) return 0; /* We need the symbol name for the VTABLE entries */ if (fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT || fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY) return 0; return 1; } void sh_elf_final_processing () { int val; /* Set file-specific flags to indicate if this code needs a processor with the sh-dsp / sh3e ISA to execute. */ if (valid_arch & arch_sh1) val = EF_SH1; else if (valid_arch & arch_sh2) val = EF_SH2; else if (valid_arch & arch_sh_dsp) val = EF_SH_DSP; else if (valid_arch & arch_sh3) val = EF_SH3; else if (valid_arch & arch_sh3_dsp) val = EF_SH_DSP; else if (valid_arch & arch_sh3e) val = EF_SH3E; else if (valid_arch & arch_sh4) val = EF_SH4; else abort (); elf_elfheader (stdoutput)->e_flags &= ~EF_SH_MACH_MASK; elf_elfheader (stdoutput)->e_flags |= val; } #endif /* Apply a fixup to the object file. */ #ifdef BFD_ASSEMBLER int md_apply_fix (fixP, valp) fixS *fixP; valueT *valp; #else void md_apply_fix (fixP, val) fixS *fixP; long val; #endif { char *buf = fixP->fx_where + fixP->fx_frag->fr_literal; int lowbyte = target_big_endian ? 1 : 0; int highbyte = target_big_endian ? 0 : 1; #ifdef BFD_ASSEMBLER long val = *valp; #endif long max, min; int shift; #ifdef BFD_ASSEMBLER /* A difference between two symbols, the second of which is in the current section, is transformed in a PC-relative relocation to the other symbol. We have to adjust the relocation type here. */ if (fixP->fx_pcrel) { switch (fixP->fx_r_type) { default: break; case BFD_RELOC_32: fixP->fx_r_type = BFD_RELOC_32_PCREL; break; /* Currently, we only support 32-bit PCREL relocations. We'd need a new reloc type to handle 16_PCREL, and 8_PCREL is already taken for R_SH_SWITCH8, which apparently does something completely different than what we need. FIXME. */ case BFD_RELOC_16: bfd_set_error (bfd_error_bad_value); return false; case BFD_RELOC_8: bfd_set_error (bfd_error_bad_value); return false; } } /* The function adjust_reloc_syms won't convert a reloc against a weak symbol into a reloc against a section, but bfd_install_relocation will screw up if the symbol is defined, so we have to adjust val here to avoid the screw up later. For ordinary relocs, this does not happen for ELF, since for ELF, bfd_install_relocation uses the "special function" field of the howto, and does not execute the code that needs to be undone, as long as the special function does not return bfd_reloc_continue. It can happen for GOT- and PLT-type relocs the way they are described in elf32-sh.c as they use bfd_elf_generic_reloc, but it doesn't matter here since those relocs don't use VAL; see below. */ if (OUTPUT_FLAVOR != bfd_target_elf_flavour && fixP->fx_addsy != NULL && S_IS_WEAK (fixP->fx_addsy)) val -= S_GET_VALUE (fixP->fx_addsy); #endif #ifndef BFD_ASSEMBLER if (fixP->fx_r_type == 0) { if (fixP->fx_size == 2) fixP->fx_r_type = BFD_RELOC_16; else if (fixP->fx_size == 4) fixP->fx_r_type = BFD_RELOC_32; else if (fixP->fx_size == 1) fixP->fx_r_type = BFD_RELOC_8; else abort (); } #endif max = min = 0; shift = 0; switch (fixP->fx_r_type) { case BFD_RELOC_SH_IMM4: max = 0xf; *buf = (*buf & 0xf0) | (val & 0xf); break; case BFD_RELOC_SH_IMM4BY2: max = 0xf; shift = 1; *buf = (*buf & 0xf0) | ((val >> 1) & 0xf); break; case BFD_RELOC_SH_IMM4BY4: max = 0xf; shift = 2; *buf = (*buf & 0xf0) | ((val >> 2) & 0xf); break; case BFD_RELOC_SH_IMM8BY2: max = 0xff; shift = 1; *buf = val >> 1; break; case BFD_RELOC_SH_IMM8BY4: max = 0xff; shift = 2; *buf = val >> 2; break; case BFD_RELOC_8: case BFD_RELOC_SH_IMM8: /* Sometimes the 8 bit value is sign extended (e.g., add) and sometimes it is not (e.g., and). We permit any 8 bit value. Note that adding further restrictions may invalidate reasonable looking assembly code, such as ``and -0x1,r0''. */ max = 0xff; min = -0xff; *buf++ = val; break; case BFD_RELOC_SH_PCRELIMM8BY4: /* The lower two bits of the PC are cleared before the displacement is added in. We can assume that the destination is on a 4 byte bounday. If this instruction is also on a 4 byte boundary, then we want (target - here) / 4 and target - here is a multiple of 4. Otherwise, we are on a 2 byte boundary, and we want (target - (here - 2)) / 4 and target - here is not a multiple of 4. Computing (target - (here - 2)) / 4 == (target - here + 2) / 4 works for both cases, since in the first case the addition of 2 will be removed by the division. target - here is in the variable val. */ val = (val + 2) / 4; if (val & ~0xff) as_bad_where (fixP->fx_file, fixP->fx_line, _("pcrel too far")); buf[lowbyte] = val; break; case BFD_RELOC_SH_PCRELIMM8BY2: val /= 2; if (val & ~0xff) as_bad_where (fixP->fx_file, fixP->fx_line, _("pcrel too far")); buf[lowbyte] = val; break; case BFD_RELOC_SH_PCDISP8BY2: val /= 2; if (val < -0x80 || val > 0x7f) as_bad_where (fixP->fx_file, fixP->fx_line, _("pcrel too far")); buf[lowbyte] = val; break; case BFD_RELOC_SH_PCDISP12BY2: val /= 2; if (val < -0x800 || val > 0x7ff) as_bad_where (fixP->fx_file, fixP->fx_line, _("pcrel too far")); buf[lowbyte] = val & 0xff; buf[highbyte] |= (val >> 8) & 0xf; break; case BFD_RELOC_32: case BFD_RELOC_32_PCREL: md_number_to_chars (buf, val, 4); break; case BFD_RELOC_16: md_number_to_chars (buf, val, 2); break; case BFD_RELOC_SH_USES: /* Pass the value into sh_coff_reloc_mangle. */ fixP->fx_addnumber = val; break; case BFD_RELOC_SH_COUNT: case BFD_RELOC_SH_ALIGN: case BFD_RELOC_SH_CODE: case BFD_RELOC_SH_DATA: case BFD_RELOC_SH_LABEL: /* Nothing to do here. */ break; case BFD_RELOC_SH_LOOP_START: case BFD_RELOC_SH_LOOP_END: case BFD_RELOC_VTABLE_INHERIT: case BFD_RELOC_VTABLE_ENTRY: fixP->fx_done = 0; #ifdef BFD_ASSEMBLER return 0; #else return; #endif #ifdef OBJ_ELF case BFD_RELOC_32_PLT_PCREL: /* Make the jump instruction point to the address of the operand. At runtime we merely add the offset to the actual PLT entry. */ *valp = 0xfffffffc; break; case BFD_RELOC_SH_GOTPC: /* This is tough to explain. We end up with this one if we have operands that look like "_GLOBAL_OFFSET_TABLE_+[.-.L284]". The goal here is to obtain the absolute address of the GOT, and it is strongly preferable from a performance point of view to avoid using a runtime relocation for this. There are cases where you have something like: .long _GLOBAL_OFFSET_TABLE_+[.-.L66] and here no correction would be required. Internally in the assembler we treat operands of this form as not being pcrel since the '.' is explicitly mentioned, and I wonder whether it would simplify matters to do it this way. Who knows. In earlier versions of the PIC patches, the pcrel_adjust field was used to store the correction, but since the expression is not pcrel, I felt it would be confusing to do it this way. */ *valp -= 1; md_number_to_chars (buf, val, 4); break; case BFD_RELOC_32_GOT_PCREL: *valp = 0; /* Fully resolved at runtime. No addend. */ md_number_to_chars (buf, 0, 4); break; case BFD_RELOC_32_GOTOFF: break; #endif default: abort (); } if (shift != 0) { if ((val & ((1 << shift) - 1)) != 0) as_bad_where (fixP->fx_file, fixP->fx_line, _("misaligned offset")); if (val >= 0) val >>= shift; else val = ((val >> shift) | ((long) -1 & ~ ((long) -1 >> shift))); } if (max != 0 && (val < min || val > max)) as_bad_where (fixP->fx_file, fixP->fx_line, _("offset out of range")); #ifdef BFD_ASSEMBLER return 0; #endif } /* Called just before address relaxation. Return the length by which a fragment must grow to reach it's destination. */ int md_estimate_size_before_relax (fragP, segment_type) register fragS *fragP; register segT segment_type; { int what; switch (fragP->fr_subtype) { default: abort (); case C (UNCOND_JUMP, UNDEF_DISP): /* Used to be a branch to somewhere which was unknown. */ if (!fragP->fr_symbol) { fragP->fr_subtype = C (UNCOND_JUMP, UNCOND12); } else if (S_GET_SEGMENT (fragP->fr_symbol) == segment_type) { fragP->fr_subtype = C (UNCOND_JUMP, UNCOND12); } else { fragP->fr_subtype = C (UNCOND_JUMP, UNDEF_WORD_DISP); } break; case C (COND_JUMP, UNDEF_DISP): case C (COND_JUMP_DELAY, UNDEF_DISP): what = GET_WHAT (fragP->fr_subtype); /* Used to be a branch to somewhere which was unknown. */ if (fragP->fr_symbol && S_GET_SEGMENT (fragP->fr_symbol) == segment_type) { /* Got a symbol and it's defined in this segment, become byte sized - maybe it will fix up. */ fragP->fr_subtype = C (what, COND8); } else if (fragP->fr_symbol) { /* Its got a segment, but its not ours, so it will always be long. */ fragP->fr_subtype = C (what, UNDEF_WORD_DISP); } else { /* We know the abs value. */ fragP->fr_subtype = C (what, COND8); } break; case C (UNCOND_JUMP, UNCOND12): case C (UNCOND_JUMP, UNCOND32): case C (UNCOND_JUMP, UNDEF_WORD_DISP): case C (COND_JUMP, COND8): case C (COND_JUMP, COND12): case C (COND_JUMP, COND32): case C (COND_JUMP, UNDEF_WORD_DISP): case C (COND_JUMP_DELAY, COND8): case C (COND_JUMP_DELAY, COND12): case C (COND_JUMP_DELAY, COND32): case C (COND_JUMP_DELAY, UNDEF_WORD_DISP): /* When relaxing a section for the second time, we don't need to do anything besides return the current size. */ break; } fragP->fr_var = md_relax_table[fragP->fr_subtype].rlx_length; return fragP->fr_var; } /* Put number into target byte order. */ void md_number_to_chars (ptr, use, nbytes) char *ptr; valueT use; int nbytes; { if (! target_big_endian) number_to_chars_littleendian (ptr, use, nbytes); else number_to_chars_bigendian (ptr, use, nbytes); } long md_pcrel_from_section (fixP, sec) fixS *fixP; segT sec; { if (fixP->fx_addsy != (symbolS *) NULL && (! S_IS_DEFINED (fixP->fx_addsy) || S_IS_EXTERN (fixP->fx_addsy) || S_IS_WEAK (fixP->fx_addsy) || S_GET_SEGMENT (fixP->fx_addsy) != sec)) { /* The symbol is undefined (or is defined but not in this section, or we're not sure about it being the final definition). Let the linker figure it out. We need to adjust the subtraction of a symbol to the position of the relocated data, though. */ return fixP->fx_subsy ? fixP->fx_where + fixP->fx_frag->fr_address : 0; } return fixP->fx_size + fixP->fx_where + fixP->fx_frag->fr_address + 2; } #ifdef OBJ_COFF int tc_coff_sizemachdep (frag) fragS *frag; { return md_relax_table[frag->fr_subtype].rlx_length; } #endif /* OBJ_COFF */ #ifndef BFD_ASSEMBLER #ifdef OBJ_COFF /* Map BFD relocs to SH COFF relocs. */ struct reloc_map { bfd_reloc_code_real_type bfd_reloc; int sh_reloc; }; static const struct reloc_map coff_reloc_map[] = { { BFD_RELOC_32, R_SH_IMM32 }, { BFD_RELOC_16, R_SH_IMM16 }, { BFD_RELOC_8, R_SH_IMM8 }, { BFD_RELOC_SH_PCDISP8BY2, R_SH_PCDISP8BY2 }, { BFD_RELOC_SH_PCDISP12BY2, R_SH_PCDISP }, { BFD_RELOC_SH_IMM4, R_SH_IMM4 }, { BFD_RELOC_SH_IMM4BY2, R_SH_IMM4BY2 }, { BFD_RELOC_SH_IMM4BY4, R_SH_IMM4BY4 }, { BFD_RELOC_SH_IMM8, R_SH_IMM8 }, { BFD_RELOC_SH_IMM8BY2, R_SH_IMM8BY2 }, { BFD_RELOC_SH_IMM8BY4, R_SH_IMM8BY4 }, { BFD_RELOC_SH_PCRELIMM8BY2, R_SH_PCRELIMM8BY2 }, { BFD_RELOC_SH_PCRELIMM8BY4, R_SH_PCRELIMM8BY4 }, { BFD_RELOC_8_PCREL, R_SH_SWITCH8 }, { BFD_RELOC_SH_SWITCH16, R_SH_SWITCH16 }, { BFD_RELOC_SH_SWITCH32, R_SH_SWITCH32 }, { BFD_RELOC_SH_USES, R_SH_USES }, { BFD_RELOC_SH_COUNT, R_SH_COUNT }, { BFD_RELOC_SH_ALIGN, R_SH_ALIGN }, { BFD_RELOC_SH_CODE, R_SH_CODE }, { BFD_RELOC_SH_DATA, R_SH_DATA }, { BFD_RELOC_SH_LABEL, R_SH_LABEL }, { BFD_RELOC_UNUSED, 0 } }; /* Adjust a reloc for the SH. This is similar to the generic code, but does some minor tweaking. */ void sh_coff_reloc_mangle (seg, fix, intr, paddr) segment_info_type *seg; fixS *fix; struct internal_reloc *intr; unsigned int paddr; { symbolS *symbol_ptr = fix->fx_addsy; symbolS *dot; intr->r_vaddr = paddr + fix->fx_frag->fr_address + fix->fx_where; if (! SWITCH_TABLE (fix)) { const struct reloc_map *rm; for (rm = coff_reloc_map; rm->bfd_reloc != BFD_RELOC_UNUSED; rm++) if (rm->bfd_reloc == (bfd_reloc_code_real_type) fix->fx_r_type) break; if (rm->bfd_reloc == BFD_RELOC_UNUSED) as_bad_where (fix->fx_file, fix->fx_line, _("Can not represent %s relocation in this object file format"), bfd_get_reloc_code_name (fix->fx_r_type)); intr->r_type = rm->sh_reloc; intr->r_offset = 0; } else { know (sh_relax); if (fix->fx_r_type == BFD_RELOC_16) intr->r_type = R_SH_SWITCH16; else if (fix->fx_r_type == BFD_RELOC_8) intr->r_type = R_SH_SWITCH8; else if (fix->fx_r_type == BFD_RELOC_32) intr->r_type = R_SH_SWITCH32; else abort (); /* For a switch reloc, we set r_offset to the difference between the reloc address and the subtrahend. When the linker is doing relaxing, it can use the determine the starting and ending points of the switch difference expression. */ intr->r_offset = intr->r_vaddr - S_GET_VALUE (fix->fx_subsy); } /* PC relative relocs are always against the current section. */ if (symbol_ptr == NULL) { switch (fix->fx_r_type) { case BFD_RELOC_SH_PCRELIMM8BY2: case BFD_RELOC_SH_PCRELIMM8BY4: case BFD_RELOC_SH_PCDISP8BY2: case BFD_RELOC_SH_PCDISP12BY2: case BFD_RELOC_SH_USES: symbol_ptr = seg->dot; break; default: break; } } if (fix->fx_r_type == BFD_RELOC_SH_USES) { /* We can't store the offset in the object file, since this reloc does not take up any space, so we store it in r_offset. The fx_addnumber field was set in md_apply_fix. */ intr->r_offset = fix->fx_addnumber; } else if (fix->fx_r_type == BFD_RELOC_SH_COUNT) { /* We can't store the count in the object file, since this reloc does not take up any space, so we store it in r_offset. The fx_offset field was set when the fixup was created in sh_coff_frob_file. */ intr->r_offset = fix->fx_offset; /* This reloc is always absolute. */ symbol_ptr = NULL; } else if (fix->fx_r_type == BFD_RELOC_SH_ALIGN) { /* Store the alignment in the r_offset field. */ intr->r_offset = fix->fx_offset; /* This reloc is always absolute. */ symbol_ptr = NULL; } else if (fix->fx_r_type == BFD_RELOC_SH_CODE || fix->fx_r_type == BFD_RELOC_SH_DATA || fix->fx_r_type == BFD_RELOC_SH_LABEL) { /* These relocs are always absolute. */ symbol_ptr = NULL; } /* Turn the segment of the symbol into an offset. */ if (symbol_ptr != NULL) { dot = segment_info[S_GET_SEGMENT (symbol_ptr)].dot; if (dot != NULL) intr->r_symndx = dot->sy_number; else intr->r_symndx = symbol_ptr->sy_number; } else intr->r_symndx = -1; } #endif /* OBJ_COFF */ #endif /* ! BFD_ASSEMBLER */ #ifdef BFD_ASSEMBLER /* Create a reloc. */ arelent * tc_gen_reloc (section, fixp) asection *section ATTRIBUTE_UNUSED; fixS *fixp; { arelent *rel; bfd_reloc_code_real_type r_type; rel = (arelent *) xmalloc (sizeof (arelent)); rel->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *)); *rel->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy); rel->address = fixp->fx_frag->fr_address + fixp->fx_where; r_type = fixp->fx_r_type; if (SWITCH_TABLE (fixp)) { rel->addend = rel->address - S_GET_VALUE (fixp->fx_subsy); if (r_type == BFD_RELOC_16) r_type = BFD_RELOC_SH_SWITCH16; else if (r_type == BFD_RELOC_8) r_type = BFD_RELOC_8_PCREL; else if (r_type == BFD_RELOC_32) r_type = BFD_RELOC_SH_SWITCH32; else abort (); } else if (r_type == BFD_RELOC_SH_USES) rel->addend = fixp->fx_addnumber; else if (r_type == BFD_RELOC_SH_COUNT) rel->addend = fixp->fx_offset; else if (r_type == BFD_RELOC_SH_ALIGN) rel->addend = fixp->fx_offset; else if (r_type == BFD_RELOC_VTABLE_INHERIT || r_type == BFD_RELOC_VTABLE_ENTRY) rel->addend = fixp->fx_offset; else if (r_type == BFD_RELOC_SH_LOOP_START || r_type == BFD_RELOC_SH_LOOP_END) rel->addend = fixp->fx_offset; else if (r_type == BFD_RELOC_SH_LABEL && fixp->fx_pcrel) { rel->addend = 0; rel->address = rel->addend = fixp->fx_offset; } else if (fixp->fx_pcrel) rel->addend = fixp->fx_addnumber; else if (r_type == BFD_RELOC_32 || r_type == BFD_RELOC_32_GOTOFF) rel->addend = fixp->fx_addnumber; else rel->addend = 0; rel->howto = bfd_reloc_type_lookup (stdoutput, r_type); if (rel->howto == NULL) { as_bad_where (fixp->fx_file, fixp->fx_line, _("Cannot represent relocation type %s"), bfd_get_reloc_code_name (r_type)); /* Set howto to a garbage value so that we can keep going. */ rel->howto = bfd_reloc_type_lookup (stdoutput, BFD_RELOC_32); assert (rel->howto != NULL); } return rel; } #endif /* BFD_ASSEMBLER */