/* i386.c -- Assemble code for the Intel 80386 Copyright (C) 1989, 1991, 1992, 1993 Free Software Foundation. This file is part of GAS, the GNU Assembler. GAS is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. GAS is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GAS; see the file COPYING. If not, write to the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ /* Intel 80386 machine specific gas. Written by Eliot Dresselhaus (eliot@mgm.mit.edu). Bugs & suggestions are completely welcome. This is free software. Please help us make it better. */ #include #include "as.h" #include "obstack.h" #include "opcode/i386.h" /* 'md_assemble ()' gathers together information and puts it into a i386_insn. */ struct _i386_insn { /* TM holds the template for the insn were currently assembling. */ template tm; /* SUFFIX holds the opcode suffix (e.g. 'l' for 'movl') if given. */ char suffix; /* Operands are coded with OPERANDS, TYPES, DISPS, IMMS, and REGS. */ /* OPERANDS gives the number of given operands. */ unsigned int operands; /* REG_OPERANDS, DISP_OPERANDS, MEM_OPERANDS, IMM_OPERANDS give the number of given register, displacement, memory operands and immediate operands. */ unsigned int reg_operands, disp_operands, mem_operands, imm_operands; /* TYPES [i] is the type (see above #defines) which tells us how to search through DISPS [i] & IMMS [i] & REGS [i] for the required operand. */ unsigned int types[MAX_OPERANDS]; /* Displacements (if given) for each operand. */ expressionS *disps[MAX_OPERANDS]; /* Immediate operands (if given) for each operand. */ expressionS *imms[MAX_OPERANDS]; /* Register operands (if given) for each operand. */ reg_entry *regs[MAX_OPERANDS]; /* BASE_REG, INDEX_REG, and LOG2_SCALE_FACTOR are used to encode the base index byte below. */ reg_entry *base_reg; reg_entry *index_reg; unsigned int log2_scale_factor; /* SEG gives the seg_entry of this insn. It is equal to zero unless an explicit segment override is given. */ const seg_entry *seg; /* segment for memory operands (if given) */ /* PREFIX holds all the given prefix opcodes (usually null). PREFIXES is the size of PREFIX. */ /* richfix: really unsigned? */ unsigned char prefix[MAX_PREFIXES]; unsigned int prefixes; /* RM and IB are the modrm byte and the base index byte where the addressing modes of this insn are encoded. */ modrm_byte rm; base_index_byte bi; }; typedef struct _i386_insn i386_insn; /* This array holds the chars that always start a comment. If the pre-processor is disabled, these aren't very useful */ #if defined (TE_I386AIX) || defined (OBJ_ELF) const char comment_chars[] = "#/"; #else const char comment_chars[] = "#"; #endif /* This array holds the chars that only start a comment at the beginning of a line. If the line seems to have the form '# 123 filename' .line and .file directives will appear in the pre-processed output */ /* Note that input_file.c hand checks for '#' at the beginning of the first line of the input file. This is because the compiler outputs #NO_APP at the beginning of its output. */ /* Also note that comments started like this one will always work if '/' isn't otherwise defined. */ #if defined (TE_I386AIX) || defined (OBJ_ELF) const char line_comment_chars[] = ""; #else const char line_comment_chars[] = "/"; #endif const char line_separator_chars[] = ""; /* Chars that can be used to separate mant from exp in floating point nums */ const char EXP_CHARS[] = "eE"; /* Chars that mean this number is a floating point constant */ /* As in 0f12.456 */ /* or 0d1.2345e12 */ const char FLT_CHARS[] = "fFdDxX"; /* tables for lexical analysis */ static char opcode_chars[256]; static char register_chars[256]; static char operand_chars[256]; static char space_chars[256]; static char identifier_chars[256]; static char digit_chars[256]; /* lexical macros */ #define is_opcode_char(x) (opcode_chars[(unsigned char) x]) #define is_operand_char(x) (operand_chars[(unsigned char) x]) #define is_register_char(x) (register_chars[(unsigned char) x]) #define is_space_char(x) (space_chars[(unsigned char) x]) #define is_identifier_char(x) (identifier_chars[(unsigned char) x]) #define is_digit_char(x) (digit_chars[(unsigned char) x]) /* put here all non-digit non-letter charcters that may occur in an operand */ static char operand_special_chars[] = "%$-+(,)*._~/<>|&^!:"; static char *ordinal_names[] = {"first", "second", "third"}; /* for printfs */ /* md_assemble() always leaves the strings it's passed unaltered. To effect this we maintain a stack of saved characters that we've smashed with '\0's (indicating end of strings for various sub-fields of the assembler instruction). */ static char save_stack[32]; static char *save_stack_p; /* stack pointer */ #define END_STRING_AND_SAVE(s) *save_stack_p++ = *s; *s = '\0' #define RESTORE_END_STRING(s) *s = *--save_stack_p /* The instruction we're assembling. */ static i386_insn i; /* Per instruction expressionS buffers: 2 displacements & 2 immediate max. */ static expressionS disp_expressions[2], im_expressions[2]; /* pointers to ebp & esp entries in reg_hash hash table */ static reg_entry *ebp, *esp; static int this_operand; /* current operand we are working on */ /* Interface to relax_segment. There are 2 relax states for 386 jump insns: one for conditional & one for unconditional jumps. This is because the these two types of jumps add different sizes to frags when we're figuring out what sort of jump to choose to reach a given label. */ /* types */ #define COND_JUMP 1 /* conditional jump */ #define UNCOND_JUMP 2 /* unconditional jump */ /* sizes */ #define BYTE 0 #define WORD 1 #define DWORD 2 #define UNKNOWN_SIZE 3 #ifndef INLINE #ifdef __GNUC__ #define INLINE __inline__ #else #define INLINE #endif #endif #define ENCODE_RELAX_STATE(type,size) \ ((relax_substateT)((type<<2) | (size))) #define SIZE_FROM_RELAX_STATE(s) \ ( (((s) & 0x3) == BYTE ? 1 : (((s) & 0x3) == WORD ? 2 : 4)) ) const relax_typeS md_relax_table[] = { /* The fields are: 1) most positive reach of this state, 2) most negative reach of this state, 3) how many bytes this mode will add to the size of the current frag 4) which index into the table to try if we can't fit into this one. */ {1, 1, 0, 0}, {1, 1, 0, 0}, {1, 1, 0, 0}, {1, 1, 0, 0}, /* For now we don't use word displacement jumps; they may be untrustworthy. */ {127 + 1, -128 + 1, 0, ENCODE_RELAX_STATE (COND_JUMP, DWORD)}, /* word conditionals add 3 bytes to frag: 2 opcode prefix; 1 displacement bytes */ {32767 + 2, -32768 + 2, 3, ENCODE_RELAX_STATE (COND_JUMP, DWORD)}, /* dword conditionals adds 4 bytes to frag: 1 opcode prefix; 3 displacement bytes */ {0, 0, 4, 0}, {1, 1, 0, 0}, {127 + 1, -128 + 1, 0, ENCODE_RELAX_STATE (UNCOND_JUMP, DWORD)}, /* word jmp adds 2 bytes to frag: 1 opcode prefix; 1 displacement bytes */ {32767 + 2, -32768 + 2, 2, ENCODE_RELAX_STATE (UNCOND_JUMP, DWORD)}, /* dword jmp adds 3 bytes to frag: 0 opcode prefix; 3 displacement bytes */ {0, 0, 3, 0}, {1, 1, 0, 0}, }; static char *output_invalid PARAMS ((int c)); static int i386_operand PARAMS ((char *operand_string)); static reg_entry *parse_register PARAMS ((char *reg_string)); #ifndef I386COFF static void s_bss PARAMS ((int)); #endif static INLINE unsigned long mode_from_disp_size (t) unsigned long t; { return (t & Disp8) ? 1 : (t & Disp32) ? 2 : 0; } #if 0 /* Not used. */ /* convert opcode suffix ('b' 'w' 'l' typically) into type specifier */ static INLINE unsigned long opcode_suffix_to_type (s) unsigned long s; { return (s == BYTE_OPCODE_SUFFIX ? Byte : (s == WORD_OPCODE_SUFFIX ? Word : DWord)); } /* opcode_suffix_to_type() */ #endif static INLINE int fits_in_signed_byte (num) long num; { return (num >= -128) && (num <= 127); } /* fits_in_signed_byte() */ static INLINE int fits_in_unsigned_byte (num) long num; { return (num & 0xff) == num; } /* fits_in_unsigned_byte() */ static INLINE int fits_in_unsigned_word (num) long num; { return (num & 0xffff) == num; } /* fits_in_unsigned_word() */ static INLINE int fits_in_signed_word (num) long num; { return (-32768 <= num) && (num <= 32767); } /* fits_in_signed_word() */ static int smallest_imm_type (num) long num; { return ((num == 1) ? (Imm1 | Imm8 | Imm8S | Imm16 | Imm32) : fits_in_signed_byte (num) ? (Imm8S | Imm8 | Imm16 | Imm32) : fits_in_unsigned_byte (num) ? (Imm8 | Imm16 | Imm32) : (fits_in_signed_word (num) || fits_in_unsigned_word (num)) ? (Imm16 | Imm32) : (Imm32)); } /* smallest_imm_type() */ const pseudo_typeS md_pseudo_table[] = { #ifndef I386COFF {"bss", s_bss, 0}, #endif #ifndef OBJ_AOUT {"align", s_align_bytes, 0}, #else {"align", s_align_ptwo, 0}, #endif {"ffloat", float_cons, 'f'}, {"dfloat", float_cons, 'd'}, {"tfloat", float_cons, 'x'}, {"value", cons, 2}, {"noopt", s_ignore, 0}, {"optim", s_ignore, 0}, #ifdef OBJ_ELF {"zero", s_space, 0}, #endif {0, 0, 0} }; /* for interface with expression () */ extern char *input_line_pointer; /* obstack for constructing various things in md_begin */ struct obstack o; /* hash table for opcode lookup */ static struct hash_control *op_hash = (struct hash_control *) 0; /* hash table for register lookup */ static struct hash_control *reg_hash = (struct hash_control *) 0; /* hash table for prefix lookup */ static struct hash_control *prefix_hash = (struct hash_control *) 0; void md_begin () { const char *hash_err; obstack_begin (&o, 4096); /* initialize op_hash hash table */ op_hash = hash_new (); /* xmalloc handles error */ { register const template *optab; register templates *core_optab; char *prev_name; optab = i386_optab; /* setup for loop */ prev_name = optab->name; obstack_grow (&o, optab, sizeof (template)); core_optab = (templates *) xmalloc (sizeof (templates)); for (optab++; optab < i386_optab_end; optab++) { if (!strcmp (optab->name, prev_name)) { /* same name as before --> append to current template list */ obstack_grow (&o, optab, sizeof (template)); } else { /* different name --> ship out current template list; add to hash table; & begin anew */ /* Note: end must be set before start! since obstack_next_free changes upon opstack_finish */ core_optab->end = (template *) obstack_next_free (&o); core_optab->start = (template *) obstack_finish (&o); hash_err = hash_insert (op_hash, prev_name, (char *) core_optab); if (hash_err) { hash_error: as_fatal ("Internal Error: Can't hash %s: %s", prev_name, hash_err); } prev_name = optab->name; core_optab = (templates *) xmalloc (sizeof (templates)); obstack_grow (&o, optab, sizeof (template)); } } } /* initialize reg_hash hash table */ reg_hash = hash_new (); { register const reg_entry *regtab; for (regtab = i386_regtab; regtab < i386_regtab_end; regtab++) { hash_err = hash_insert (reg_hash, regtab->reg_name, (PTR) regtab); if (hash_err) goto hash_error; } } esp = (reg_entry *) hash_find (reg_hash, "esp"); ebp = (reg_entry *) hash_find (reg_hash, "ebp"); /* initialize reg_hash hash table */ prefix_hash = hash_new (); { register const prefix_entry *prefixtab; for (prefixtab = i386_prefixtab; prefixtab < i386_prefixtab_end; prefixtab++) { hash_err = hash_insert (prefix_hash, prefixtab->prefix_name, (PTR) prefixtab); if (hash_err) goto hash_error; } } /* fill in lexical tables: opcode_chars, operand_chars, space_chars */ { register int c; register char *p; for (c = 0; c < 256; c++) { if (islower (c) || isdigit (c)) { opcode_chars[c] = c; register_chars[c] = c; } else if (isupper (c)) { opcode_chars[c] = tolower (c); register_chars[c] = opcode_chars[c]; } else if (c == PREFIX_SEPERATOR) { opcode_chars[c] = c; } else if (c == ')' || c == '(') { register_chars[c] = c; } if (isupper (c) || islower (c) || isdigit (c)) operand_chars[c] = c; if (isdigit (c) || c == '-') digit_chars[c] = c; if (isalpha (c) || c == '_' || c == '.' || isdigit (c)) identifier_chars[c] = c; if (c == ' ' || c == '\t') space_chars[c] = c; } for (p = operand_special_chars; *p != '\0'; p++) operand_chars[(unsigned char) *p] = *p; } #ifdef OBJ_ELF record_alignment (text_section, 2); record_alignment (data_section, 2); record_alignment (bss_section, 2); #endif } void md_end () { } /* not much to do here. */ #ifdef DEBUG386 /* debugging routines for md_assemble */ static void pi PARAMS ((char *, i386_insn *)); static void pte PARAMS ((template *)); static void pt PARAMS ((unsigned int)); static void pe PARAMS ((expressionS *)); static void ps PARAMS ((symbolS *)); static void pi (line, x) char *line; i386_insn *x; { register template *p; int i; fprintf (stdout, "%s: template ", line); pte (&x->tm); fprintf (stdout, " modrm: mode %x reg %x reg/mem %x", x->rm.mode, x->rm.reg, x->rm.regmem); fprintf (stdout, " base %x index %x scale %x\n", x->bi.base, x->bi.index, x->bi.scale); for (i = 0; i < x->operands; i++) { fprintf (stdout, " #%d: ", i + 1); pt (x->types[i]); fprintf (stdout, "\n"); if (x->types[i] & Reg) fprintf (stdout, "%s\n", x->regs[i]->reg_name); if (x->types[i] & Imm) pe (x->imms[i]); if (x->types[i] & (Disp | Abs)) pe (x->disps[i]); } } static void pte (t) template *t; { int i; fprintf (stdout, " %d operands ", t->operands); fprintf (stdout, "opcode %x ", t->base_opcode); if (t->extension_opcode != None) fprintf (stdout, "ext %x ", t->extension_opcode); if (t->opcode_modifier & D) fprintf (stdout, "D"); if (t->opcode_modifier & W) fprintf (stdout, "W"); fprintf (stdout, "\n"); for (i = 0; i < t->operands; i++) { fprintf (stdout, " #%d type ", i + 1); pt (t->operand_types[i]); fprintf (stdout, "\n"); } } static void pe (e) expressionS *e; { fprintf (stdout, " operation %d\n", e->X_op); fprintf (stdout, " add_number %d (%x)\n", e->X_add_number, e->X_add_number); if (e->X_add_symbol) { fprintf (stdout, " add_symbol "); ps (e->X_add_symbol); fprintf (stdout, "\n"); } if (e->X_op_symbol) { fprintf (stdout, " op_symbol "); ps (e->X_op_symbol); fprintf (stdout, "\n"); } } static void ps (s) symbolS *s; { fprintf (stdout, "%s type %s%s", S_GET_NAME (s), S_IS_EXTERNAL (s) ? "EXTERNAL " : "", segment_name (S_GET_SEGMENT (s))); } struct type_name { unsigned int mask; char *tname; } type_names[] = { { Reg8, "r8" }, { Reg16, "r16" }, { Reg32, "r32" }, { Imm8, "i8" }, { Imm8S, "i8s" }, { Imm16, "i16" }, { Imm32, "i32" }, { Mem8, "Mem8" }, { Mem16, "Mem16" }, { Mem32, "Mem32" }, { BaseIndex, "BaseIndex" }, { Abs8, "Abs8" }, { Abs16, "Abs16" }, { Abs32, "Abs32" }, { Disp8, "d8" }, { Disp16, "d16" }, { Disp32, "d32" }, { SReg2, "SReg2" }, { SReg3, "SReg3" }, { Acc, "Acc" }, { InOutPortReg, "InOutPortReg" }, { ShiftCount, "ShiftCount" }, { Imm1, "i1" }, { Control, "control reg" }, { Test, "test reg" }, { FloatReg, "FReg" }, { FloatAcc, "FAcc" }, { JumpAbsolute, "Jump Absolute" }, { 0, "" } }; static void pt (t) unsigned int t; { register struct type_name *ty; if (t == Unknown) { fprintf (stdout, "Unknown"); } else { for (ty = type_names; ty->mask; ty++) if (t & ty->mask) fprintf (stdout, "%s, ", ty->tname); } fflush (stdout); } #endif /* DEBUG386 */ #ifdef BFD_ASSEMBLER static bfd_reloc_code_real_type reloc (size, pcrel) int size; int pcrel; { if (pcrel) switch (size) { #ifndef OBJ_ELF case 1: return BFD_RELOC_8_PCREL; case 2: return BFD_RELOC_16_PCREL; #endif case 4: return BFD_RELOC_32_PCREL; } else switch (size) { #ifndef OBJ_ELF case 1: return BFD_RELOC_8; case 2: return BFD_RELOC_16; #endif case 4: return BFD_RELOC_32; } as_bad ("Can not do %d byte %srelocation", size, pcrel ? "pc-relative" : ""); return BFD_RELOC_NONE; } #else #define reloc(SIZE,PCREL) 0 #define BFD_RELOC_32 0 #define BFD_RELOC_32_PCREL 0 #endif /* This is the guts of the machine-dependent assembler. LINE points to a machine dependent instruction. This function is supposed to emit the frags/bytes it assembles to. */ void md_assemble (line) char *line; { /* Holds template once we've found it. */ register template *t; /* Count the size of the instruction generated. */ int insn_size = 0; /* Possible templates for current insn */ templates *current_templates = (templates *) 0; /* Initialize globals. */ memset (&i, '\0', sizeof (i)); memset (disp_expressions, '\0', sizeof (disp_expressions)); memset (im_expressions, '\0', sizeof (im_expressions)); save_stack_p = save_stack; /* reset stack pointer */ /* Fist parse an opcode & call i386_operand for the operands. We assume that the scrubber has arranged it so that line[0] is the valid start of a (possibly prefixed) opcode. */ { register char *l = line; /* Fast place to put LINE. */ /* 1 if operand is pending after ','. */ unsigned int expecting_operand = 0; /* 1 if we found a prefix only acceptable with string insns. */ unsigned int expecting_string_instruction = 0; /* Non-zero if operand parens not balenced. */ unsigned int paren_not_balenced; char *token_start = l; while (!is_space_char (*l) && *l != END_OF_INSN) { if (!is_opcode_char (*l)) { as_bad ("invalid character %s in opcode", output_invalid (*l)); return; } else if (*l != PREFIX_SEPERATOR) { *l = opcode_chars[(unsigned char) *l]; /* fold case of opcodes */ l++; } else { /* this opcode's got a prefix */ register unsigned int q; register prefix_entry *prefix; if (l == token_start) { as_bad ("expecting prefix; got nothing"); return; } END_STRING_AND_SAVE (l); prefix = (prefix_entry *) hash_find (prefix_hash, token_start); if (!prefix) { as_bad ("no such opcode prefix ('%s')", token_start); return; } RESTORE_END_STRING (l); /* check for repeated prefix */ for (q = 0; q < i.prefixes; q++) if (i.prefix[q] == prefix->prefix_code) { as_bad ("same prefix used twice; you don't really want this!"); return; } if (i.prefixes == MAX_PREFIXES) { as_bad ("too many opcode prefixes"); return; } i.prefix[i.prefixes++] = prefix->prefix_code; if (prefix->prefix_code == REPE || prefix->prefix_code == REPNE) expecting_string_instruction = 1; /* skip past PREFIX_SEPERATOR and reset token_start */ token_start = ++l; } } END_STRING_AND_SAVE (l); if (token_start == l) { as_bad ("expecting opcode; got nothing"); return; } /* Lookup insn in hash; try intel & att naming conventions if appropriate; that is: we only use the opcode suffix 'b' 'w' or 'l' if we need to. */ current_templates = (templates *) hash_find (op_hash, token_start); if (!current_templates) { int last_index = strlen (token_start) - 1; char last_char = token_start[last_index]; switch (last_char) { case DWORD_OPCODE_SUFFIX: case WORD_OPCODE_SUFFIX: case BYTE_OPCODE_SUFFIX: token_start[last_index] = '\0'; current_templates = (templates *) hash_find (op_hash, token_start); token_start[last_index] = last_char; i.suffix = last_char; } if (!current_templates) { as_bad ("no such 386 instruction: `%s'", token_start); return; } } RESTORE_END_STRING (l); /* check for rep/repne without a string instruction */ if (expecting_string_instruction && !IS_STRING_INSTRUCTION (current_templates-> start->base_opcode)) { as_bad ("expecting string instruction after rep/repne"); return; } /* There may be operands to parse. */ if (*l != END_OF_INSN && /* For string instructions, we ignore any operands if given. This kludges, for example, 'rep/movsb %ds:(%esi), %es:(%edi)' where the operands are always going to be the same, and are not really encoded in machine code. */ !IS_STRING_INSTRUCTION (current_templates-> start->base_opcode)) { /* parse operands */ do { /* skip optional white space before operand */ while (!is_operand_char (*l) && *l != END_OF_INSN) { if (!is_space_char (*l)) { as_bad ("invalid character %s before %s operand", output_invalid (*l), ordinal_names[i.operands]); return; } l++; } token_start = l; /* after white space */ paren_not_balenced = 0; while (paren_not_balenced || *l != ',') { if (*l == END_OF_INSN) { if (paren_not_balenced) { as_bad ("unbalenced parenthesis in %s operand.", ordinal_names[i.operands]); return; } else break; /* we are done */ } else if (!is_operand_char (*l) && !is_space_char (*l)) { as_bad ("invalid character %s in %s operand", output_invalid (*l), ordinal_names[i.operands]); return; } if (*l == '(') ++paren_not_balenced; if (*l == ')') --paren_not_balenced; l++; } if (l != token_start) { /* yes, we've read in another operand */ unsigned int operand_ok; this_operand = i.operands++; if (i.operands > MAX_OPERANDS) { as_bad ("spurious operands; (%d operands/instruction max)", MAX_OPERANDS); return; } /* now parse operand adding info to 'i' as we go along */ END_STRING_AND_SAVE (l); operand_ok = i386_operand (token_start); RESTORE_END_STRING (l); /* restore old contents */ if (!operand_ok) return; } else { if (expecting_operand) { expecting_operand_after_comma: as_bad ("expecting operand after ','; got nothing"); return; } if (*l == ',') { as_bad ("expecting operand before ','; got nothing"); return; } } /* now *l must be either ',' or END_OF_INSN */ if (*l == ',') { if (*++l == END_OF_INSN) { /* just skip it, if it's \n complain */ goto expecting_operand_after_comma; } expecting_operand = 1; } } while (*l != END_OF_INSN); /* until we get end of insn */ } } /* Now we've parsed the opcode into a set of templates, and have the operands at hand. Next, we find a template that matches the given insn, making sure the overlap of the given operands types is consistent with the template operand types. */ #define MATCH(overlap,given_type) \ (overlap && \ (((overlap & (JumpAbsolute|BaseIndex|Mem8)) \ == (given_type & (JumpAbsolute|BaseIndex|Mem8))) \ || (overlap == InOutPortReg))) /* If m0 and m1 are register matches they must be consistent with the expected operand types t0 and t1. That is, if both m0 & m1 are register matches i.e. ( ((m0 & (Reg)) && (m1 & (Reg)) ) ? then, either 1. or 2. must be true: 1. the expected operand type register overlap is null: (t0 & t1 & Reg) == 0 AND the given register overlap is null: (m0 & m1 & Reg) == 0 2. the expected operand type register overlap == the given operand type overlap: (t0 & t1 & m0 & m1 & Reg). */ #define CONSISTENT_REGISTER_MATCH(m0, m1, t0, t1) \ ( ((m0 & (Reg)) && (m1 & (Reg))) ? \ ( ((t0 & t1 & (Reg)) == 0 && (m0 & m1 & (Reg)) == 0) || \ ((t0 & t1) & (m0 & m1) & (Reg)) \ ) : 1) { register unsigned int overlap0, overlap1; expressionS *exp; unsigned int overlap2; unsigned int found_reverse_match; overlap0 = overlap1 = overlap2 = found_reverse_match = 0; for (t = current_templates->start; t < current_templates->end; t++) { /* must have right number of operands */ if (i.operands != t->operands) continue; else if (!t->operands) break; /* 0 operands always matches */ overlap0 = i.types[0] & t->operand_types[0]; switch (t->operands) { case 1: if (!MATCH (overlap0, i.types[0])) continue; break; case 2: case 3: overlap1 = i.types[1] & t->operand_types[1]; if (!MATCH (overlap0, i.types[0]) || !MATCH (overlap1, i.types[1]) || !CONSISTENT_REGISTER_MATCH (overlap0, overlap1, t->operand_types[0], t->operand_types[1])) { /* check if other direction is valid ... */ if (!(t->opcode_modifier & COMES_IN_BOTH_DIRECTIONS)) continue; /* try reversing direction of operands */ overlap0 = i.types[0] & t->operand_types[1]; overlap1 = i.types[1] & t->operand_types[0]; if (!MATCH (overlap0, i.types[0]) || !MATCH (overlap1, i.types[1]) || !CONSISTENT_REGISTER_MATCH (overlap0, overlap1, t->operand_types[0], t->operand_types[1])) { /* does not match either direction */ continue; } /* found a reverse match here -- slip through */ /* found_reverse_match holds which of D or FloatD we've found */ found_reverse_match = t->opcode_modifier & COMES_IN_BOTH_DIRECTIONS; } /* endif: not forward match */ /* found either forward/reverse 2 operand match here */ if (t->operands == 3) { overlap2 = i.types[2] & t->operand_types[2]; if (!MATCH (overlap2, i.types[2]) || !CONSISTENT_REGISTER_MATCH (overlap0, overlap2, t->operand_types[0], t->operand_types[2]) || !CONSISTENT_REGISTER_MATCH (overlap1, overlap2, t->operand_types[1], t->operand_types[2])) continue; } /* found either forward/reverse 2 or 3 operand match here: slip through to break */ } break; /* we've found a match; break out of loop */ } /* for (t = ... */ if (t == current_templates->end) { /* we found no match */ as_bad ("operands given don't match any known 386 instruction"); return; } /* Copy the template we found (we may change it!). */ memcpy (&i.tm, t, sizeof (template)); t = &i.tm; /* alter new copy of template */ /* If there's no opcode suffix we try to invent one based on register operands. */ if (!i.suffix && i.reg_operands) { /* We take i.suffix from the LAST register operand specified. This assumes that the last register operands is the destination register operand. */ int op; for (op = 0; op < MAX_OPERANDS; op++) if (i.types[op] & Reg) { i.suffix = ((i.types[op] == Reg8) ? BYTE_OPCODE_SUFFIX : (i.types[op] == Reg16) ? WORD_OPCODE_SUFFIX : DWORD_OPCODE_SUFFIX); } } /* Make still unresolved immediate matches conform to size of immediate given in i.suffix. Note: overlap2 cannot be an immediate! We assume this. */ if ((overlap0 & (Imm8 | Imm8S | Imm16 | Imm32)) && overlap0 != Imm8 && overlap0 != Imm8S && overlap0 != Imm16 && overlap0 != Imm32) { if (!i.suffix) { as_bad ("no opcode suffix given; can't determine immediate size"); return; } overlap0 &= (i.suffix == BYTE_OPCODE_SUFFIX ? (Imm8 | Imm8S) : (i.suffix == WORD_OPCODE_SUFFIX ? Imm16 : Imm32)); } if ((overlap1 & (Imm8 | Imm8S | Imm16 | Imm32)) && overlap1 != Imm8 && overlap1 != Imm8S && overlap1 != Imm16 && overlap1 != Imm32) { if (!i.suffix) { as_bad ("no opcode suffix given; can't determine immediate size"); return; } overlap1 &= (i.suffix == BYTE_OPCODE_SUFFIX ? (Imm8 | Imm8S) : (i.suffix == WORD_OPCODE_SUFFIX ? Imm16 : Imm32)); } i.types[0] = overlap0; i.types[1] = overlap1; i.types[2] = overlap2; if (overlap0 & ImplicitRegister) i.reg_operands--; if (overlap1 & ImplicitRegister) i.reg_operands--; if (overlap2 & ImplicitRegister) i.reg_operands--; if (overlap0 & Imm1) i.imm_operands = 0; /* kludge for shift insns */ if (found_reverse_match) { unsigned int save; save = t->operand_types[0]; t->operand_types[0] = t->operand_types[1]; t->operand_types[1] = save; } /* Finalize opcode. First, we change the opcode based on the operand size given by i.suffix: we never have to change things for byte insns, or when no opcode suffix is need to size the operands. */ if (!i.suffix && (t->opcode_modifier & W)) { as_bad ("no opcode suffix given and no register operands; can't size instruction"); return; } if (i.suffix && i.suffix != BYTE_OPCODE_SUFFIX) { /* Select between byte and word/dword operations. */ if (t->opcode_modifier & W) t->base_opcode |= W; /* Now select between word & dword operations via the operand size prefix. */ if (i.suffix == WORD_OPCODE_SUFFIX) { if (i.prefixes == MAX_PREFIXES) { as_bad ("%d prefixes given and 'w' opcode suffix gives too many prefixes", MAX_PREFIXES); return; } i.prefix[i.prefixes++] = WORD_PREFIX_OPCODE; } } /* For insns with operands there are more diddles to do to the opcode. */ if (i.operands) { /* If we found a reverse match we must alter the opcode direction bit found_reverse_match holds bit to set (different for int & float insns). */ if (found_reverse_match) { t->base_opcode |= found_reverse_match; } /* The imul $imm, %reg instruction is converted into imul $imm, %reg, %reg. */ if (t->opcode_modifier & imulKludge) { /* Pretend we saw the 3 operand case. */ i.regs[2] = i.regs[1]; i.reg_operands = 2; } /* Certain instructions expect the destination to be in the i.rm.reg field. This is by far the exceptional case. For these instructions, if the source operand is a register, we must reverse the i.rm.reg and i.rm.regmem fields. We accomplish this by faking that the two register operands were given in the reverse order. */ if ((t->opcode_modifier & ReverseRegRegmem) && i.reg_operands == 2) { unsigned int first_reg_operand = (i.types[0] & Reg) ? 0 : 1; unsigned int second_reg_operand = first_reg_operand + 1; reg_entry *tmp = i.regs[first_reg_operand]; i.regs[first_reg_operand] = i.regs[second_reg_operand]; i.regs[second_reg_operand] = tmp; } if (t->opcode_modifier & ShortForm) { /* The register or float register operand is in operand 0 or 1. */ unsigned int op = (i.types[0] & (Reg | FloatReg)) ? 0 : 1; /* Register goes in low 3 bits of opcode. */ t->base_opcode |= i.regs[op]->reg_num; } else if (t->opcode_modifier & ShortFormW) { /* Short form with 0x8 width bit. Register is always dest. operand */ t->base_opcode |= i.regs[1]->reg_num; if (i.suffix == WORD_OPCODE_SUFFIX || i.suffix == DWORD_OPCODE_SUFFIX) t->base_opcode |= 0x8; } else if (t->opcode_modifier & Seg2ShortForm) { if (t->base_opcode == POP_SEG_SHORT && i.regs[0]->reg_num == 1) { as_bad ("you can't 'pop cs' on the 386."); return; } t->base_opcode |= (i.regs[0]->reg_num << 3); } else if (t->opcode_modifier & Seg3ShortForm) { /* 'push %fs' is 0x0fa0; 'pop %fs' is 0x0fa1. 'push %gs' is 0x0fa8; 'pop %fs' is 0x0fa9. So, only if i.regs[0]->reg_num == 5 (%gs) do we need to change the opcode. */ if (i.regs[0]->reg_num == 5) t->base_opcode |= 0x08; } else if (t->opcode_modifier & Modrm) { /* The opcode is completed (modulo t->extension_opcode which must be put into the modrm byte. Now, we make the modrm & index base bytes based on all the info we've collected. */ /* i.reg_operands MUST be the number of real register operands; implicit registers do not count. */ if (i.reg_operands == 2) { unsigned int source, dest; source = (i.types[0] & (Reg | SReg2 | SReg3 | Control | Debug | Test)) ? 0 : 1; dest = source + 1; i.rm.mode = 3; /* We must be careful to make sure that all segment/control/test/debug registers go into the i.rm.reg field (despite the whether they are source or destination operands). */ if (i.regs[dest]->reg_type & (SReg2 | SReg3 | Control | Debug | Test)) { i.rm.reg = i.regs[dest]->reg_num; i.rm.regmem = i.regs[source]->reg_num; } else { i.rm.reg = i.regs[source]->reg_num; i.rm.regmem = i.regs[dest]->reg_num; } } else { /* if it's not 2 reg operands... */ if (i.mem_operands) { unsigned int fake_zero_displacement = 0; unsigned int op = (i.types[0] & Mem) ? 0 : ((i.types[1] & Mem) ? 1 : 2); /* Encode memory operand into modrm byte and base index byte. */ if (i.base_reg == esp && !i.index_reg) { /* (%esp) becomes two byte modrm with no index register. */ i.rm.regmem = ESCAPE_TO_TWO_BYTE_ADDRESSING; i.rm.mode = mode_from_disp_size (i.types[op]); i.bi.base = ESP_REG_NUM; i.bi.index = NO_INDEX_REGISTER; i.bi.scale = 0; /* Must be zero! */ } else if (i.base_reg == ebp && !i.index_reg) { if (!(i.types[op] & Disp)) { /* Must fake a zero byte displacement. There is no direct way to code '(%ebp)' directly. */ fake_zero_displacement = 1; /* fake_zero_displacement code does not set this. */ i.types[op] |= Disp8; } i.rm.mode = mode_from_disp_size (i.types[op]); i.rm.regmem = EBP_REG_NUM; } else if (!i.base_reg && (i.types[op] & BaseIndex)) { /* There are three cases here. Case 1: '<32bit disp>(,1)' -- indirect absolute. (Same as cases 2 & 3 with NO index register) Case 2: <32bit disp> (,) -- no base register with disp Case 3: (, ) --- no base register; no disp (must add 32bit 0 disp). */ i.rm.regmem = ESCAPE_TO_TWO_BYTE_ADDRESSING; i.rm.mode = 0; /* 32bit mode */ i.bi.base = NO_BASE_REGISTER; i.types[op] &= ~Disp; i.types[op] |= Disp32; /* Must be 32bit! */ if (i.index_reg) { /* case 2 or case 3 */ i.bi.index = i.index_reg->reg_num; i.bi.scale = i.log2_scale_factor; if (i.disp_operands == 0) fake_zero_displacement = 1; /* case 3 */ } else { i.bi.index = NO_INDEX_REGISTER; i.bi.scale = 0; } } else if (i.disp_operands && !i.base_reg && !i.index_reg) { /* Operand is just <32bit disp> */ i.rm.regmem = EBP_REG_NUM; i.rm.mode = 0; i.types[op] &= ~Disp; i.types[op] |= Disp32; } else { /* It's not a special case; rev'em up. */ i.rm.regmem = i.base_reg->reg_num; i.rm.mode = mode_from_disp_size (i.types[op]); if (i.index_reg) { i.rm.regmem = ESCAPE_TO_TWO_BYTE_ADDRESSING; i.bi.base = i.base_reg->reg_num; i.bi.index = i.index_reg->reg_num; i.bi.scale = i.log2_scale_factor; if (i.base_reg == ebp && i.disp_operands == 0) { /* pace */ fake_zero_displacement = 1; i.types[op] |= Disp8; i.rm.mode = mode_from_disp_size (i.types[op]); } } } if (fake_zero_displacement) { /* Fakes a zero displacement assuming that i.types[op] holds the correct displacement size. */ exp = &disp_expressions[i.disp_operands++]; i.disps[op] = exp; exp->X_op = O_constant; exp->X_add_number = 0; exp->X_add_symbol = (symbolS *) 0; exp->X_op_symbol = (symbolS *) 0; } /* Select the correct segment for the memory operand. */ if (i.seg) { unsigned int seg_index; const seg_entry *default_seg; if (i.rm.regmem == ESCAPE_TO_TWO_BYTE_ADDRESSING) { seg_index = (i.rm.mode << 3) | i.bi.base; default_seg = two_byte_segment_defaults[seg_index]; } else { seg_index = (i.rm.mode << 3) | i.rm.regmem; default_seg = one_byte_segment_defaults[seg_index]; } /* If the specified segment is not the default, use an opcode prefix to select it */ if (i.seg != default_seg) { if (i.prefixes == MAX_PREFIXES) { as_bad ("%d prefixes given and %s segment override gives too many prefixes", MAX_PREFIXES, i.seg->seg_name); return; } i.prefix[i.prefixes++] = i.seg->seg_prefix; } } } /* Fill in i.rm.reg or i.rm.regmem field with register operand (if any) based on t->extension_opcode. Again, we must be careful to make sure that segment/control/debug/test registers are coded into the i.rm.reg field. */ if (i.reg_operands) { unsigned int op = (i.types[0] & (Reg | SReg2 | SReg3 | Control | Debug | Test)) ? 0 : (i.types[1] & (Reg | SReg2 | SReg3 | Control | Debug | Test)) ? 1 : 2; /* If there is an extension opcode to put here, the register number must be put into the regmem field. */ if (t->extension_opcode != None) i.rm.regmem = i.regs[op]->reg_num; else i.rm.reg = i.regs[op]->reg_num; /* Now, if no memory operand has set i.rm.mode = 0, 1, 2 we must set it to 3 to indicate this is a register operand int the regmem field */ if (!i.mem_operands) i.rm.mode = 3; } /* Fill in i.rm.reg field with extension opcode (if any). */ if (t->extension_opcode != None) i.rm.reg = t->extension_opcode; } } } } /* Handle conversion of 'int $3' --> special int3 insn. */ if (t->base_opcode == INT_OPCODE && i.imms[0]->X_add_number == 3) { t->base_opcode = INT3_OPCODE; i.imm_operands = 0; } /* We are ready to output the insn. */ { register char *p; /* Output jumps. */ if (t->opcode_modifier & Jump) { unsigned long n = i.disps[0]->X_add_number; if (i.disps[0]->X_op == O_constant) { if (fits_in_signed_byte (n)) { p = frag_more (2); insn_size += 2; p[0] = t->base_opcode; p[1] = n; } #if 0 /* leave out 16 bit jumps - pace */ else if (fits_in_signed_word (n)) { p = frag_more (4); insn_size += 4; p[0] = WORD_PREFIX_OPCODE; p[1] = t->base_opcode; md_number_to_chars (&p[2], (valueT) n, 2); } #endif else { /* It's an absolute dword displacement. */ if (t->base_opcode == JUMP_PC_RELATIVE) { /* pace */ /* unconditional jump */ p = frag_more (5); insn_size += 5; p[0] = (char) 0xe9; md_number_to_chars (&p[1], (valueT) n, 4); } else { /* conditional jump */ p = frag_more (6); insn_size += 6; p[0] = TWO_BYTE_OPCODE_ESCAPE; p[1] = t->base_opcode + 0x10; md_number_to_chars (&p[2], (valueT) n, 4); } } } else { /* It's a symbol; end frag & setup for relax. Make sure there are more than 6 chars left in the current frag; if not we'll have to start a new one. */ if (obstack_room (&frags) <= 6) { frag_wane (frag_now); frag_new (0); } p = frag_more (1); insn_size += 1; p[0] = t->base_opcode; frag_var (rs_machine_dependent, 6, /* 2 opcode/prefix + 4 displacement */ 1, ((unsigned char) *p == JUMP_PC_RELATIVE ? ENCODE_RELAX_STATE (UNCOND_JUMP, BYTE) : ENCODE_RELAX_STATE (COND_JUMP, BYTE)), i.disps[0]->X_add_symbol, (long) n, p); } } else if (t->opcode_modifier & (JumpByte | JumpDword)) { int size = (t->opcode_modifier & JumpByte) ? 1 : 4; unsigned long n = i.disps[0]->X_add_number; if (fits_in_unsigned_byte (t->base_opcode)) { FRAG_APPEND_1_CHAR (t->base_opcode); insn_size += 1; } else { p = frag_more (2); /* opcode can be at most two bytes */ insn_size += 2; /* put out high byte first: can't use md_number_to_chars! */ *p++ = (t->base_opcode >> 8) & 0xff; *p = t->base_opcode & 0xff; } p = frag_more (size); insn_size += size; if (i.disps[0]->X_op == O_constant) { md_number_to_chars (p, (valueT) n, size); if (size == 1 && !fits_in_signed_byte (n)) { as_bad ("loop/jecx only takes byte displacement; %lu shortened to %d", n, *p); } } else { fix_new_exp (frag_now, p - frag_now->fr_literal, size, i.disps[0], 1, reloc (size, 1)); } } else if (t->opcode_modifier & JumpInterSegment) { p = frag_more (1 + 2 + 4); /* 1 opcode; 2 segment; 4 offset */ insn_size += 1 + 2 + 4; p[0] = t->base_opcode; if (i.imms[1]->X_op == O_constant) md_number_to_chars (p + 1, (valueT) i.imms[1]->X_add_number, 4); else fix_new_exp (frag_now, p + 1 - frag_now->fr_literal, 4, i.imms[1], 0, BFD_RELOC_32); if (i.imms[0]->X_op != O_constant) as_bad ("can't handle non absolute segment in long call/jmp"); md_number_to_chars (p + 5, (valueT) i.imms[0]->X_add_number, 2); } else { /* Output normal instructions here. */ unsigned char *q; /* First the prefix bytes. */ for (q = i.prefix; q < i.prefix + i.prefixes; q++) { p = frag_more (1); insn_size += 1; md_number_to_chars (p, (valueT) *q, 1); } /* Now the opcode; be careful about word order here! */ if (fits_in_unsigned_byte (t->base_opcode)) { FRAG_APPEND_1_CHAR (t->base_opcode); insn_size += 1; } else if (fits_in_unsigned_word (t->base_opcode)) { p = frag_more (2); insn_size += 2; /* put out high byte first: can't use md_number_to_chars! */ *p++ = (t->base_opcode >> 8) & 0xff; *p = t->base_opcode & 0xff; } else { /* opcode is either 3 or 4 bytes */ if (t->base_opcode & 0xff000000) { p = frag_more (4); insn_size += 4; *p++ = (t->base_opcode >> 24) & 0xff; } else { p = frag_more (3); insn_size += 3; } *p++ = (t->base_opcode >> 16) & 0xff; *p++ = (t->base_opcode >> 8) & 0xff; *p = (t->base_opcode) & 0xff; } /* Now the modrm byte and base index byte (if present). */ if (t->opcode_modifier & Modrm) { p = frag_more (1); insn_size += 1; /* md_number_to_chars (p, i.rm, 1); */ md_number_to_chars (p, (valueT) (i.rm.regmem << 0 | i.rm.reg << 3 | i.rm.mode << 6), 1); /* If i.rm.regmem == ESP (4) && i.rm.mode != Mode 3 (Register mode) ==> need second modrm byte. */ if (i.rm.regmem == ESCAPE_TO_TWO_BYTE_ADDRESSING && i.rm.mode != 3) { p = frag_more (1); insn_size += 1; /* md_number_to_chars (p, i.bi, 1); */ md_number_to_chars (p, (valueT) (i.bi.base << 0 | i.bi.index << 3 | i.bi.scale << 6), 1); } } if (i.disp_operands) { register unsigned int n; for (n = 0; n < i.operands; n++) { if (i.disps[n]) { if (i.disps[n]->X_op == O_constant) { if (i.types[n] & (Disp8 | Abs8)) { p = frag_more (1); insn_size += 1; md_number_to_chars (p, (valueT) i.disps[n]->X_add_number, 1); } else if (i.types[n] & (Disp16 | Abs16)) { p = frag_more (2); insn_size += 2; md_number_to_chars (p, (valueT) i.disps[n]->X_add_number, 2); } else { /* Disp32|Abs32 */ p = frag_more (4); insn_size += 4; md_number_to_chars (p, (valueT) i.disps[n]->X_add_number, 4); } } else { /* not absolute_section */ /* need a 32-bit fixup (don't support 8bit non-absolute disps) */ p = frag_more (4); insn_size += 4; fix_new_exp (frag_now, p - frag_now->fr_literal, 4, i.disps[n], 0, BFD_RELOC_32); } } } } /* end displacement output */ /* output immediate */ if (i.imm_operands) { register unsigned int n; for (n = 0; n < i.operands; n++) { if (i.imms[n]) { if (i.imms[n]->X_op == O_constant) { if (i.types[n] & (Imm8 | Imm8S)) { p = frag_more (1); insn_size += 1; md_number_to_chars (p, (valueT) i.imms[n]->X_add_number, 1); } else if (i.types[n] & Imm16) { p = frag_more (2); insn_size += 2; md_number_to_chars (p, (valueT) i.imms[n]->X_add_number, 2); } else { p = frag_more (4); insn_size += 4; md_number_to_chars (p, (valueT) i.imms[n]->X_add_number, 4); } } else { /* not absolute_section */ /* need a 32-bit fixup (don't support 8bit non-absolute ims) */ /* try to support other sizes ... */ int size; if (i.types[n] & (Imm8 | Imm8S)) size = 1; else if (i.types[n] & Imm16) size = 2; else size = 4; p = frag_more (size); insn_size += size; fix_new_exp (frag_now, p - frag_now->fr_literal, size, i.imms[n], 0, reloc (size, 0)); } } } } /* end immediate output */ } #ifdef DEBUG386 if (flagseen['D']) { pi (line, &i); } #endif /* DEBUG386 */ } return; } /* Parse OPERAND_STRING into the i386_insn structure I. Returns non-zero on error. */ static int i386_operand (operand_string) char *operand_string; { register char *op_string = operand_string; /* Address of '\0' at end of operand_string. */ char *end_of_operand_string = operand_string + strlen (operand_string); /* Start and end of displacement string expression (if found). */ char *displacement_string_start = NULL; char *displacement_string_end = NULL; /* We check for an absolute prefix (differentiating, for example, 'jmp pc_relative_label' from 'jmp *absolute_label'. */ if (*op_string == ABSOLUTE_PREFIX) { op_string++; i.types[this_operand] |= JumpAbsolute; } /* Check if operand is a register. */ if (*op_string == REGISTER_PREFIX) { register reg_entry *r; if (!(r = parse_register (op_string))) { as_bad ("bad register name ('%s')", op_string); return 0; } /* Check for segment override, rather than segment register by searching for ':' after %s where = s, c, d, e, f, g. */ if ((r->reg_type & (SReg2 | SReg3)) && op_string[3] == ':') { switch (r->reg_num) { case 0: i.seg = (seg_entry *) & es; break; case 1: i.seg = (seg_entry *) & cs; break; case 2: i.seg = (seg_entry *) & ss; break; case 3: i.seg = (seg_entry *) & ds; break; case 4: i.seg = (seg_entry *) & fs; break; case 5: i.seg = (seg_entry *) & gs; break; } op_string += 4; /* skip % s : */ operand_string = op_string; /* Pretend given string starts here. */ if (!is_digit_char (*op_string) && !is_identifier_char (*op_string) && *op_string != '(' && *op_string != ABSOLUTE_PREFIX) { as_bad ("bad memory operand after segment override"); return 0; } /* Handle case of %es:*foo. */ if (*op_string == ABSOLUTE_PREFIX) { op_string++; i.types[this_operand] |= JumpAbsolute; } goto do_memory_reference; } i.types[this_operand] |= r->reg_type; i.regs[this_operand] = r; i.reg_operands++; } else if (*op_string == IMMEDIATE_PREFIX) { /* ... or an immediate */ char *save_input_line_pointer; segT exp_seg = 0; expressionS *exp; if (i.imm_operands == MAX_IMMEDIATE_OPERANDS) { as_bad ("only 1 or 2 immediate operands are allowed"); return 0; } exp = &im_expressions[i.imm_operands++]; i.imms[this_operand] = exp; save_input_line_pointer = input_line_pointer; input_line_pointer = ++op_string; /* must advance op_string! */ SKIP_WHITESPACE (); exp_seg = expression (exp); input_line_pointer = save_input_line_pointer; if (exp->X_op == O_absent) { /* missing or bad expr becomes absolute 0 */ as_bad ("missing or invalid immediate expression '%s' taken as 0", operand_string); exp->X_op = O_constant; exp->X_add_number = 0; exp->X_add_symbol = (symbolS *) 0; exp->X_op_symbol = (symbolS *) 0; i.types[this_operand] |= Imm; } else if (exp->X_op == O_constant) { i.types[this_operand] |= smallest_imm_type ((unsigned long) exp->X_add_number); } #ifdef OBJ_AOUT else if (exp_seg != text_section && exp_seg != data_section && exp_seg != bss_section && exp_seg != undefined_section #ifdef BFD_ASSEMBLER && ! bfd_is_com_section (exp_seg) #endif ) { seg_unimplemented: as_bad ("Unimplemented segment type %d in parse_operand", exp_seg); return 0; } #endif else { /* this is an address ==> 32bit */ i.types[this_operand] |= Imm32; } /* shorten this type of this operand if the instruction wants * fewer bits than are present in the immediate. The bit field * code can put out 'andb $0xffffff, %al', for example. pace * also 'movw $foo,(%eax)' */ switch (i.suffix) { case WORD_OPCODE_SUFFIX: i.types[this_operand] |= Imm16; break; case BYTE_OPCODE_SUFFIX: i.types[this_operand] |= Imm16 | Imm8 | Imm8S; break; } } else if (is_digit_char (*op_string) || is_identifier_char (*op_string) || *op_string == '(') { /* This is a memory reference of some sort. */ register char *base_string; unsigned int found_base_index_form; do_memory_reference: if (i.mem_operands == MAX_MEMORY_OPERANDS) { as_bad ("more than 1 memory reference in instruction"); return 0; } i.mem_operands++; /* Determine type of memory operand from opcode_suffix; no opcode suffix implies general memory references. */ switch (i.suffix) { case BYTE_OPCODE_SUFFIX: i.types[this_operand] |= Mem8; break; case WORD_OPCODE_SUFFIX: i.types[this_operand] |= Mem16; break; case DWORD_OPCODE_SUFFIX: default: i.types[this_operand] |= Mem32; } /* Check for base index form. We detect the base index form by looking for an ')' at the end of the operand, searching for the '(' matching it, and finding a REGISTER_PREFIX or ',' after it. */ base_string = end_of_operand_string - 1; found_base_index_form = 0; if (*base_string == ')') { unsigned int parens_balenced = 1; /* We've already checked that the number of left & right ()'s are equal, so this loop will not be infinite. */ do { base_string--; if (*base_string == ')') parens_balenced++; if (*base_string == '(') parens_balenced--; } while (parens_balenced); base_string++; /* Skip past '('. */ if (*base_string == REGISTER_PREFIX || *base_string == ',') found_base_index_form = 1; } /* If we can't parse a base index register expression, we've found a pure displacement expression. We set up displacement_string_start and displacement_string_end for the code below. */ if (!found_base_index_form) { displacement_string_start = op_string; displacement_string_end = end_of_operand_string; } else { char *base_reg_name, *index_reg_name, *num_string; int num; i.types[this_operand] |= BaseIndex; /* If there is a displacement set-up for it to be parsed later. */ if (base_string != op_string + 1) { displacement_string_start = op_string; displacement_string_end = base_string - 1; } /* Find base register (if any). */ if (*base_string != ',') { base_reg_name = base_string++; /* skip past register name & parse it */ while (isalpha (*base_string)) base_string++; if (base_string == base_reg_name + 1) { as_bad ("can't find base register name after '(%c'", REGISTER_PREFIX); return 0; } END_STRING_AND_SAVE (base_string); if (!(i.base_reg = parse_register (base_reg_name))) { as_bad ("bad base register name ('%s')", base_reg_name); return 0; } RESTORE_END_STRING (base_string); } /* Now check seperator; must be ',' ==> index reg OR num ==> no index reg. just scale factor OR ')' ==> end. (scale factor = 1) */ if (*base_string != ',' && *base_string != ')') { as_bad ("expecting ',' or ')' after base register in `%s'", operand_string); return 0; } /* There may index reg here; and there may be a scale factor. */ if (*base_string == ',' && *(base_string + 1) == REGISTER_PREFIX) { index_reg_name = ++base_string; while (isalpha (*++base_string)); END_STRING_AND_SAVE (base_string); if (!(i.index_reg = parse_register (index_reg_name))) { as_bad ("bad index register name ('%s')", index_reg_name); return 0; } RESTORE_END_STRING (base_string); } /* Check for scale factor. */ if (*base_string == ',' && isdigit (*(base_string + 1))) { num_string = ++base_string; while (is_digit_char (*base_string)) base_string++; if (base_string == num_string) { as_bad ("can't find a scale factor after ','"); return 0; } END_STRING_AND_SAVE (base_string); /* We've got a scale factor. */ if (!sscanf (num_string, "%d", &num)) { as_bad ("can't parse scale factor from '%s'", num_string); return 0; } RESTORE_END_STRING (base_string); switch (num) { /* must be 1 digit scale */ case 1: i.log2_scale_factor = 0; break; case 2: i.log2_scale_factor = 1; break; case 4: i.log2_scale_factor = 2; break; case 8: i.log2_scale_factor = 3; break; default: as_bad ("expecting scale factor of 1, 2, 4, 8; got %d", num); return 0; } } else { if (!i.index_reg && *base_string == ',') { as_bad ("expecting index register or scale factor after ','; got '%c'", *(base_string + 1)); return 0; } } } /* If there's an expression begining the operand, parse it, assuming displacement_string_start and displacement_string_end are meaningful. */ if (displacement_string_start) { register expressionS *exp; segT exp_seg = 0; char *save_input_line_pointer; exp = &disp_expressions[i.disp_operands]; i.disps[this_operand] = exp; i.disp_operands++; save_input_line_pointer = input_line_pointer; input_line_pointer = displacement_string_start; END_STRING_AND_SAVE (displacement_string_end); exp_seg = expression (exp); if (*input_line_pointer) as_bad ("Ignoring junk '%s' after expression", input_line_pointer); RESTORE_END_STRING (displacement_string_end); input_line_pointer = save_input_line_pointer; if (exp->X_op == O_absent) { /* missing expr becomes absolute 0 */ as_bad ("missing or invalid displacement '%s' taken as 0", operand_string); i.types[this_operand] |= (Disp | Abs); exp->X_op = O_constant; exp->X_add_number = 0; exp->X_add_symbol = (symbolS *) 0; exp->X_op_symbol = (symbolS *) 0; } else if (exp->X_op == O_constant) { i.types[this_operand] |= SMALLEST_DISP_TYPE (exp->X_add_number); } else if (exp_seg == text_section || exp_seg == data_section || exp_seg == bss_section || exp_seg == undefined_section) { i.types[this_operand] |= Disp32; } else { #ifndef OBJ_AOUT i.types[this_operand] |= Disp32; #else goto seg_unimplemented; #endif } } /* Make sure the memory operand we've been dealt is valid. */ if (i.base_reg && i.index_reg && !(i.base_reg->reg_type & i.index_reg->reg_type & Reg)) { as_bad ("register size mismatch in (base,index,scale) expression"); return 0; } /* * special case for (%dx) while doing input/output op */ if ((i.base_reg && (i.base_reg->reg_type == (Reg16 | InOutPortReg)) && (i.index_reg == 0))) { i.types[this_operand] |= InOutPortReg; return 1; } if ((i.base_reg && (i.base_reg->reg_type & Reg32) == 0) || (i.index_reg && (i.index_reg->reg_type & Reg32) == 0)) { as_bad ("base/index register must be 32 bit register"); return 0; } if (i.index_reg && i.index_reg == esp) { as_bad ("%s may not be used as an index register", esp->reg_name); return 0; } } else { /* it's not a memory operand; argh! */ as_bad ("invalid char %s begining %s operand '%s'", output_invalid (*op_string), ordinal_names[this_operand], op_string); return 0; } return 1; /* normal return */ } /* * md_estimate_size_before_relax() * * Called just before relax(). * Any symbol that is now undefined will not become defined. * Return the correct fr_subtype in the frag. * Return the initial "guess for fr_var" to caller. * The guess for fr_var is ACTUALLY the growth beyond fr_fix. * Whatever we do to grow fr_fix or fr_var contributes to our returned value. * Although it may not be explicit in the frag, pretend fr_var starts with a * 0 value. */ int md_estimate_size_before_relax (fragP, segment) register fragS *fragP; register segT segment; { register unsigned char *opcode; register int old_fr_fix; old_fr_fix = fragP->fr_fix; opcode = (unsigned char *) fragP->fr_opcode; /* We've already got fragP->fr_subtype right; all we have to do is check for un-relaxable symbols. */ if (S_GET_SEGMENT (fragP->fr_symbol) != segment) { /* symbol is undefined in this segment */ switch (opcode[0]) { case JUMP_PC_RELATIVE: /* make jmp (0xeb) a dword displacement jump */ opcode[0] = 0xe9; /* dword disp jmp */ fragP->fr_fix += 4; fix_new (fragP, old_fr_fix, 4, fragP->fr_symbol, fragP->fr_offset, 1, BFD_RELOC_32_PCREL); break; default: /* This changes the byte-displacement jump 0x7N --> the dword-displacement jump 0x0f8N */ opcode[1] = opcode[0] + 0x10; opcode[0] = TWO_BYTE_OPCODE_ESCAPE; /* two-byte escape */ fragP->fr_fix += 1 + 4; /* we've added an opcode byte */ fix_new (fragP, old_fr_fix + 1, 4, fragP->fr_symbol, fragP->fr_offset, 1, BFD_RELOC_32_PCREL); break; } frag_wane (fragP); } return (fragP->fr_var + fragP->fr_fix - old_fr_fix); } /* md_estimate_size_before_relax() */ /* * md_convert_frag(); * * Called after relax() is finished. * In: Address of frag. * fr_type == rs_machine_dependent. * fr_subtype is what the address relaxed to. * * Out: Any fixSs and constants are set up. * Caller will turn frag into a ".space 0". */ #ifndef BFD_ASSEMBLER void md_convert_frag (headers, fragP) object_headers *headers; register fragS *fragP; #else void md_convert_frag (abfd, sec, fragP) bfd *abfd; segT sec; register fragS *fragP; #endif { register unsigned char *opcode; unsigned char *where_to_put_displacement = NULL; unsigned int target_address; unsigned int opcode_address; unsigned int extension = 0; int displacement_from_opcode_start; opcode = (unsigned char *) fragP->fr_opcode; /* Address we want to reach in file space. */ target_address = S_GET_VALUE (fragP->fr_symbol) + fragP->fr_offset; #ifdef BFD_ASSEMBLER /* not needed otherwise? */ target_address += fragP->fr_symbol->sy_frag->fr_address; #endif /* Address opcode resides at in file space. */ opcode_address = fragP->fr_address + fragP->fr_fix; /* Displacement from opcode start to fill into instruction. */ displacement_from_opcode_start = target_address - opcode_address; switch (fragP->fr_subtype) { case ENCODE_RELAX_STATE (COND_JUMP, BYTE): case ENCODE_RELAX_STATE (UNCOND_JUMP, BYTE): /* don't have to change opcode */ extension = 1; /* 1 opcode + 1 displacement */ where_to_put_displacement = &opcode[1]; break; case ENCODE_RELAX_STATE (COND_JUMP, WORD): opcode[1] = TWO_BYTE_OPCODE_ESCAPE; opcode[2] = opcode[0] + 0x10; opcode[0] = WORD_PREFIX_OPCODE; extension = 4; /* 3 opcode + 2 displacement */ where_to_put_displacement = &opcode[3]; break; case ENCODE_RELAX_STATE (UNCOND_JUMP, WORD): opcode[1] = 0xe9; opcode[0] = WORD_PREFIX_OPCODE; extension = 3; /* 2 opcode + 2 displacement */ where_to_put_displacement = &opcode[2]; break; case ENCODE_RELAX_STATE (COND_JUMP, DWORD): opcode[1] = opcode[0] + 0x10; opcode[0] = TWO_BYTE_OPCODE_ESCAPE; extension = 5; /* 2 opcode + 4 displacement */ where_to_put_displacement = &opcode[2]; break; case ENCODE_RELAX_STATE (UNCOND_JUMP, DWORD): opcode[0] = 0xe9; extension = 4; /* 1 opcode + 4 displacement */ where_to_put_displacement = &opcode[1]; break; default: BAD_CASE (fragP->fr_subtype); break; } /* now put displacement after opcode */ md_number_to_chars ((char *) where_to_put_displacement, (valueT) (displacement_from_opcode_start - extension), SIZE_FROM_RELAX_STATE (fragP->fr_subtype)); fragP->fr_fix += extension; } int md_short_jump_size = 2; /* size of byte displacement jmp */ int md_long_jump_size = 5; /* size of dword displacement jmp */ const int md_reloc_size = 8; /* Size of relocation record */ void md_create_short_jump (ptr, from_addr, to_addr, frag, to_symbol) char *ptr; addressT from_addr, to_addr; fragS *frag; symbolS *to_symbol; { long offset; offset = to_addr - (from_addr + 2); md_number_to_chars (ptr, (valueT) 0xeb, 1); /* opcode for byte-disp jump */ md_number_to_chars (ptr + 1, (valueT) offset, 1); } void md_create_long_jump (ptr, from_addr, to_addr, frag, to_symbol) char *ptr; addressT from_addr, to_addr; fragS *frag; symbolS *to_symbol; { long offset; if (flagseen['m']) { offset = to_addr - S_GET_VALUE (to_symbol); md_number_to_chars (ptr, (valueT) 0xe9, 1);/* opcode for long jmp */ md_number_to_chars (ptr + 1, (valueT) offset, 4); fix_new (frag, (ptr + 1) - frag->fr_literal, 4, to_symbol, (offsetT) 0, 0, BFD_RELOC_32); } else { offset = to_addr - (from_addr + 5); md_number_to_chars (ptr, (valueT) 0xe9, 1); md_number_to_chars (ptr + 1, (valueT) offset, 4); } } void /* Knows about order of bytes in address. */ md_number_to_chars (con, value, nbytes) char con[]; /* Return 'nbytes' of chars here. */ valueT value; /* The value of the bits. */ int nbytes; /* Number of bytes in the output. */ { register char *p = con; switch (nbytes) { case 1: p[0] = value & 0xff; break; case 2: p[0] = value & 0xff; p[1] = (value >> 8) & 0xff; break; case 4: p[0] = value & 0xff; p[1] = (value >> 8) & 0xff; p[2] = (value >> 16) & 0xff; p[3] = (value >> 24) & 0xff; break; default: BAD_CASE (nbytes); } } /* Apply a fixup (fixS) to segment data, once it has been determined by our caller that we have all the info we need to fix it up. On the 386, immediates, displacements, and data pointers are all in the same (little-endian) format, so we don't need to care about which we are handling. */ static void md_apply_fix_1 (fixP, value) fixS *fixP; /* The fix we're to put in */ long value; /* The value of the bits. */ { register char *p = fixP->fx_where + fixP->fx_frag->fr_literal; #ifdef BFD_ASSEMBLER /* * This is a hack. There should be a better way to * handle this. */ if (fixP->fx_r_type == BFD_RELOC_32_PCREL && fixP->fx_addsy) { value += fixP->fx_where + fixP->fx_frag->fr_address; } #endif switch (fixP->fx_size) { case 1: *p = value; break; case 2: *p++ = value; *p = (value >> 8); break; case 4: *p++ = value; *p++ = (value >> 8); *p++ = (value >> 16); *p = (value >> 24); break; default: BAD_CASE (fixP->fx_size); } } #ifdef BFD_ASSEMBLER int md_apply_fix (fixP, valp) fixS *fixP; valueT *valp; { md_apply_fix_1 (fixP, *valp); return 1; } #else void md_apply_fix (fixP, val) fixS *fixP; long val; { md_apply_fix_1 (fixP, val); } #endif #if 0 /* This is never used. */ long /* Knows about the byte order in a word. */ md_chars_to_number (con, nbytes) unsigned char con[]; /* Low order byte 1st. */ int nbytes; /* Number of bytes in the input. */ { long retval; for (retval = 0, con += nbytes - 1; nbytes--; con--) { retval <<= BITS_PER_CHAR; retval |= *con; } return retval; } #endif /* 0 */ #define MAX_LITTLENUMS 6 /* Turn the string pointed to by litP into a floating point constant of type type, and emit the appropriate bytes. The number of LITTLENUMS emitted is stored in *sizeP . An error message is returned, or NULL on OK. */ char * md_atof (type, litP, sizeP) char type; char *litP; int *sizeP; { int prec; LITTLENUM_TYPE words[MAX_LITTLENUMS]; LITTLENUM_TYPE *wordP; char *t; switch (type) { case 'f': case 'F': prec = 2; break; case 'd': case 'D': prec = 4; break; case 'x': case 'X': prec = 5; break; default: *sizeP = 0; return "Bad call to md_atof ()"; } t = atof_ieee (input_line_pointer, type, words); if (t) input_line_pointer = t; *sizeP = prec * sizeof (LITTLENUM_TYPE); /* This loops outputs the LITTLENUMs in REVERSE order; in accord with the bigendian 386. */ for (wordP = words + prec - 1; prec--;) { md_number_to_chars (litP, (valueT) (*wordP--), sizeof (LITTLENUM_TYPE)); litP += sizeof (LITTLENUM_TYPE); } return 0; } char output_invalid_buf[8]; static char * output_invalid (c) char c; { if (isprint (c)) sprintf (output_invalid_buf, "'%c'", c); else sprintf (output_invalid_buf, "(0x%x)", (unsigned) c); return output_invalid_buf; } /* reg_string starts *before* REGISTER_PREFIX */ static reg_entry * parse_register (reg_string) char *reg_string; { register char *s = reg_string; register char *p; char reg_name_given[MAX_REG_NAME_SIZE]; s++; /* skip REGISTER_PREFIX */ for (p = reg_name_given; is_register_char (*s); p++, s++) { *p = register_chars[(unsigned char) *s]; if (p >= reg_name_given + MAX_REG_NAME_SIZE) return (reg_entry *) 0; } *p = '\0'; return (reg_entry *) hash_find (reg_hash, reg_name_given); } /* We have no need to default values of symbols. */ /* ARGSUSED */ symbolS * md_undefined_symbol (name) char *name; { return 0; } /* Parse an operand that is machine-specific. We just return without modifying the expression if we have nothing to do. */ /* ARGSUSED */ void md_operand (expressionP) expressionS *expressionP; { } /* Round up a section size to the appropriate boundary. */ valueT md_section_align (segment, size) segT segment; valueT size; { return size; /* Byte alignment is fine */ } /* Exactly what point is a PC-relative offset relative TO? On the i386, they're relative to the address of the offset, plus its size. (??? Is this right? FIXME-SOON!) */ long md_pcrel_from (fixP) fixS *fixP; { return fixP->fx_size + fixP->fx_where + fixP->fx_frag->fr_address; } #ifndef I386COFF static void s_bss (ignore) int ignore; { register int temp; temp = get_absolute_expression (); subseg_set (bss_section, (subsegT) temp); demand_empty_rest_of_line (); } #endif #ifdef BFD_ASSEMBLER arelent * tc_gen_reloc (section, fixp) asection *section; fixS *fixp; { arelent *rel; bfd_reloc_code_real_type code; #define F(SZ,PCREL) (((SZ) << 1) + (PCREL)) switch (F (fixp->fx_size, fixp->fx_pcrel)) { #define MAP(SZ,PCREL,TYPE) case F(SZ,PCREL): code = (TYPE); break #ifndef OBJ_ELF MAP (1, 0, BFD_RELOC_8); MAP (2, 0, BFD_RELOC_16); #endif MAP (4, 0, BFD_RELOC_32); #ifndef OBJ_ELF MAP (1, 1, BFD_RELOC_8_PCREL); MAP (2, 1, BFD_RELOC_16_PCREL); #endif MAP (4, 1, BFD_RELOC_32_PCREL); default: as_bad ("Can not do %d byte %srelocation", fixp->fx_size, fixp->fx_pcrel ? "pc-relative" : ""); } #undef MAP #undef F rel = (arelent *) bfd_alloc_by_size_t (stdoutput, sizeof (arelent)); assert (rel != 0); rel->sym_ptr_ptr = &fixp->fx_addsy->bsym; rel->address = fixp->fx_frag->fr_address + fixp->fx_where; if (fixp->fx_pcrel) rel->addend = fixp->fx_addnumber; else rel->addend = 0; rel->howto = bfd_reloc_type_lookup (stdoutput, code); if (!rel->howto) { const char *name; name = S_GET_NAME (fixp->fx_addsy); if (name == NULL) name = ""; as_fatal ("Cannot find relocation type for symbol %s, code %d", name, (int) code); } return rel; } #else /* ! BFD_ASSEMBLER */ #if (defined(OBJ_AOUT) | defined(OBJ_BOUT)) void tc_aout_fix_to_chars (where, fixP, segment_address_in_file) char *where; fixS *fixP; relax_addressT segment_address_in_file; { /* * In: length of relocation (or of address) in chars: 1, 2 or 4. * Out: GNU LD relocation length code: 0, 1, or 2. */ static const unsigned char nbytes_r_length[] = {42, 0, 1, 42, 2}; long r_symbolnum; know (fixP->fx_addsy != NULL); md_number_to_chars (where, (valueT) (fixP->fx_frag->fr_address + fixP->fx_where - segment_address_in_file), 4); r_symbolnum = (S_IS_DEFINED (fixP->fx_addsy) ? S_GET_TYPE (fixP->fx_addsy) : fixP->fx_addsy->sy_number); where[6] = (r_symbolnum >> 16) & 0x0ff; where[5] = (r_symbolnum >> 8) & 0x0ff; where[4] = r_symbolnum & 0x0ff; where[7] = ((((!S_IS_DEFINED (fixP->fx_addsy)) << 3) & 0x08) | ((nbytes_r_length[fixP->fx_size] << 1) & 0x06) | (((fixP->fx_pcrel << 0) & 0x01) & 0x0f)); } #endif /* OBJ_AOUT or OBJ_BOUT */ #if defined (I386COFF) short tc_coff_fix2rtype (fixP) fixS *fixP; { return (fixP->fx_pcrel ? (fixP->fx_size == 1 ? R_PCRBYTE : fixP->fx_size == 2 ? R_PCRWORD : R_PCRLONG) : (fixP->fx_size == 1 ? R_RELBYTE : fixP->fx_size == 2 ? R_RELWORD : R_DIR32)); } int tc_coff_sizemachdep (frag) fragS *frag; { if (frag->fr_next) return (frag->fr_next->fr_address - frag->fr_address); else return 0; } #endif /* I386COFF */ #endif /* BFD_ASSEMBLER? */ /* end of tc-i386.c */