############################################################################## ## This file is a shell script fragment that supplies the information ## necessary to tailor a template configure script into the configure ## script appropriate for this directory. For more information, check ## any existing configure script. ## Be warned, there are two types of configure.in files. There are those ## used by Autoconf, which are macros which are expanded into a configure ## script by autoconf. The other sort, of which this is one, is executed ## by Cygnus configure. ## For more information on these two systems, check out the documentation ## for 'Autoconf' (autoconf.texi) and 'Configure' (configure.texi). ############################################################################## ### To add a new directory to the tree, first choose whether it is a target ### or a host dependent tool. Then put it into the appropriate list ### (library or tools, host or target), doing a dependency sort. For ### example, gdb requires that byacc (or bison) be built first, so it is in ### the ${host_tools} list after byacc and bison. # these libraries are used by various programs built for the host environment # host_libs="mmalloc libiberty opcodes bfd readline glob gash tcl tk tclX" # these tools are built for the host environment # host_tools="texinfo byacc flex bison binutils ld gas gcc gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu sim m4 autoconf ispell grep diff rcs cvs fileutils shellutils textutils wdiff find emacs emacs19 uudecode hello tar gzip indent recode release sed utils" # these libraries are built for the target environment, and are built after # the host libraries and the host tools (which may be a cross compiler) # target_libs="libm xiberty newlib libio librx libg++" # these tools are built using the target libs, and are intended to run only # in the target environment # # note: any program that *uses* libraries that are in the "target_libs" # list belongs in this list. those programs are also very likely # candidates for the "native_only" list which follows # target_tools="examples groff" ################################################################################ ## These two lists are of directories that are to be removed from the ## ${configdirs} list for either cross-compilations or for native- ## compilations. For example, it doesn't make that much sense to ## cross-compile Emacs, nor is it terribly useful to compile xiberty in ## a native environment. # directories to be built in the native environment only # native_only="autoconf cvs emacs emacs19 fileutils find grep groff gzip hello indent ispell m4 rcs recode sed shellutils tar textutils gash tk uudecode wdiff gprof" # directories to be built in a cross environment only # cross_only="xiberty newlib" ## All tools belong in one of the four categories, and are assigned above ## We assign ${configdirs} this way to remove all embedded newlines. This ## is important because configure will choke if they ever get through. # configdirs=`echo ${host_libs} ${host_tools} ${target_libs} ${target_tools}` ################################################################################ srctrigger=move-if-change srcname="gnu development package" # This gets set non-empty for some net releases of packages. appdirs="" # per-host: # Work in distributions that contain no compiler tools, like Autoconf. if [ -d ${srcdir}/config ]; then case "${host}" in m68k-hp-hpux*) host_makefile_frag=config/mh-hp300 ;; m68k-apollo-sysv*) host_makefile_frag=config/mh-apollo68 ;; m68k-apollo-bsd*) host_makefile_frag=config/mh-a68bsd ;; m88k-dg-dgux*) host_makefile_frag=config/mh-dgux ;; m88k-harris-cxux*) host_makefile_frag=config/mh-cxux ;; m88k-motorola-sysv*) host_makefile_frag=config/mh-delta88;; mips*-dec-ultrix*) host_makefile_frag=config/mh-decstation ;; mips*-sgi-irix5*) host_makefile_frag=config/mh-irix5 ;; mips*-sgi-irix4*) host_makefile_frag=config/mh-irix4 ;; mips*-sgi-irix3*) host_makefile_frag=config/mh-sysv ;; mips*-*-sysv4*) host_makefile_frag=config/mh-sysv4 ;; mips*-*-sysv*) host_makefile_frag=config/mh-riscos ;; i[345]86-ncr-sysv43) host_makefile_frag=config/mh-ncrsvr43 ;; i[345]86-ncr-sysv4*) host_makefile_frag=config/mh-ncr3000 ;; i[345]86-*-sco*) host_makefile_frag=config/mh-sco ;; i[345]86-*-isc*) host_makefile_frag=config/mh-sysv ;; i[345]86-*-linux*) host_makefile_frag=config/mh-linux ;; i[345]86-*-solaris2*) host_makefile_frag=config/mh-sysv4 ;; i[345]86-*-aix*) host_makefile_frag=config/mh-aix386 ;; i[345]86-*-go32*) host_makefile_frag=config/mh-go32 ;; vax-*-ultrix2*) host_makefile_frag=config/mh-vaxult2 ;; *-ibm-aix*) host_makefile_frag=config/mh-aix ;; *-bull-bosx*) host_makefile_frag=config/mh-aix ;; *-*-solaris2*) host_makefile_frag=config/mh-solaris ;; m68k-sun-*) host_makefile_frag=config/mh-sun3 ;; *-sun-*) host_makefile_frag=config/mh-sun ;; *-hp-hpux*) host_makefile_frag=config/mh-hpux ;; *-*-hiux*) host_makefile_frag=config/mh-hpux ;; rs6000-*-lynxos*) host_makefile_frag=config/mh-lynxrs6k ;; *-*-lynxos*) host_makefile_frag=config/mh-lynxos ;; *-*-sysv4*) host_makefile_frag=config/mh-sysv4 ;; *-*-sysv*) host_makefile_frag=config/mh-sysv ;; esac fi # The Solaris /usr/ucb/cc compiler does not appear to work. case "${host}" in sparc-sun-solaris2*) if [ "`/usr/bin/which ${CC-cc}`" = "/usr/ucb/cc" ] ; then could_use= [ -d /opt/SUNWspro/bin ] && could_use="/opt/SUNWspro/bin" if [ -d /opt/cygnus/bin ] ; then if [ "$could_use" == "" ] ; then could_use="/opt/cygnus/bin" else could_use="$could_use or /opt/cygnus/bin" fi fi if [ "$could_use" = "" ] ; then echo "Warning: compilation may fail because you're using" echo "/usr/ucb/cc. You should change your PATH or CC " echo "variable and rerun configure." else echo "Warning: compilation may fail because you're using" echo "/usr/ucb/cc, when you should use the C compiler from" echo "$could_use. You should change your" echo "PATH or CC variable and rerun configure." fi fi ;; esac # per-target: case "${target}" in v810*) target_makefile_frag=config/mt-v810 ;; esac gasdir=gas use_gnu_ld= use_gnu_as= # some tools are so dependent upon X11 that if we're not building with X, # it's not even worth trying to configure, much less build, that tool. case ${with_x} in yes | "") # the default value for this tree is that X11 is available ;; no) configdirs=`echo " ${configdirs} " | sed -e 's/ tk / /;/ gash / /'` ;; *) echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2 ;; esac # Recognize --without-newlib. if [ x${with_newlib} = xno ]; then configdirs=`echo " ${configdirs} " | sed -e 's/ newlib / /'` fi # Some tools are only suitable for building in a "native" situation. # Those are added when we have a host==target configuration. For cross # toolchains, we add some directories that should only be useful in a # cross-compiler. is_cross_compiler= if [ x"${host}" = x"${target}" ] ; then # when doing a native toolchain, don't build the targets # that are in the 'cross only' list for i in ${cross_only} ; do configdirs=`echo " ${configdirs} " | sed -e "s/ $i / /"` done is_cross_compiler=no else # similarly, don't build the targets in the 'native only' # list when building a cross compiler for i in ${native_only} ; do configdirs=`echo " ${configdirs} " | sed -e "s/ $i / /"` done is_cross_compiler=yes fi # Configure extra directories which are host specific case "${host}" in i[345]86-*-go32*) configdirs="$configdirs dosrel" ;; esac # Remove more programs from consideration, based on the host or # target this usually means that a port of the program doesn't # exist yet. noconfigdirs="" case "${host}" in i[345]86-*-netbsd*) noconfigdirs="tk fileutils" ;; i[345]86-*-vsta) noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff" ;; i[345]86-*-go32) noconfigdirs="tcl expect deja-gnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff" ;; esac case "${target}" in alpha-dec-osf1*) noconfigdirs="$noconfigdirs emacs emacs19 fileutils grep newlib" ;; alpha*-*-*) noconfigdirs="$noconfigdirs newlib" ;; h8300*-*-* | \ h8500-*-*) noconfigdirs="$noconfigdirs libg++ libio librx" ;; hppa*-*-*elf*) # Do configure ld/binutils/gas for this case. ;; hppa*-*-*) # HP's C compiler doesn't handle Emacs correctly (but on BSD and Mach # cc is gcc, and on any system a user should be able to link cc to # whatever they want. FIXME, emacs emacs19). case "${CC}" in "" | cc*) noconfigdirs="$noconfigdirs emacs emacs19" ;; *) ;; esac noconfigdirs="$noconfigdirs ld shellutils" ;; i[345]86-*-go32) # add the go32 support tools to the list # but don't build gdb configdirs=`echo go32 ${configdirs}` noconfigdirs="$noconfigdirs gdb libg++ libio librx" ;; i[345]86-*-sco*) noconfigdirs="$noconfigdirs gprof" ;; i[345]86-*-solaris2*) # The linker does static linking correctly, but the Solaris C library # has bugs such that some important functions won't work when statically # linked. (See man pages for getpwuid, for example.) noconfigdirs="$noconfigdirs ld" ;; i[345]86-*-sysv4*) # The SYSV4 C compiler doesn't handle Emacs correctly case "${CC}" in "" | cc*) noconfigdirs="$noconfigdirs emacs emacs19" ;; *) ;; esac # but that's okay since emacs doesn't work anyway noconfigdirs="$noconfigdirs emacs emacs19" ;; powerpc-*-aix*) # copied from rs6000-*-* entry noconfigdirs="$noconfigdirs ld binutils gprof textutils cvs" ;; rs6000-*-lynxos*) # a gcc built textutils will cause the linker to hang on 'join' # The CVS server code doesn't work on the RS/6000 # Newlib makes problems for libg++ in crosses. noconfigdirs="$noconfigdirs gas ld newlib gprof textutils cvs" use_gnu_ld=no use_gnu_as=no ;; rs6000-*-*) # a gcc built textutils will cause the linker to hang on 'join' noconfigdirs="$noconfigdirs ld binutils gprof textutils" ;; m68k-apollo-*) noconfigdirs="$noconfigdirs ld binutils gprof" ;; mips*-*-irix5*) # The GNU linker does not support shared libraries. noconfigdirs="$noconfigdirs ld gprof" ;; mips*-dec-bsd*) noconfigdirs="$noconfigdirs gprof" ;; mips*-*-bsd*) noconfigdirs="$noconfigdirs gprof ld" ;; mips*-*-*) noconfigdirs="$noconfigdirs gprof" ;; romp-*-*) noconfigdirs="bfd binutils ld gas opcodes" ;; sh-*-*) case "${host}" in i[345]86-*-vsta) ;; # don't add gprof back in *) configdirs=`echo gprof ${configdirs}` ;; i[345]86-*-go32) ;; # don't add gprof back in *) configdirs=`echo gprof ${configdirs}` ;; esac ;; sparc-*-sunos4*) if [ x${is_cross_compiler} != xno ] ; then noconfigdirs="$noconfigdirs gdb gdbtest newlib sim dejagnu expect tcl" else use_gnu_ld=no fi ;; vax-*-vms) noconfigdirs="$noconfigdirs bfd binutils gdb ld newlib opcodes" ;; vax-*-*) noconfigdirs="$noconfigdirs newlib" ;; *-*-lynxos*) # Newlib makes problems for libg++ in crosses. noconfigdirs="$noconfigdirs newlib" ;; esac # Remove the entries in $noconfigdirs from $configdirs. If we have the # source for them, add them to $notsupp. notsupp="" for dir in . $noconfigdirs ; do if [ $dir != . ] && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"` if [ -r $srcdir/$dir/configure ] || [ -r $srcdir/$dir/configure.in ]; then notsupp="$notsupp $dir" fi fi done # Produce a warning message for the subdirs we can't configure. # This isn't especially interesting in the Cygnus tree, but in the individual # FSF releases, it's important to let people know when their machine isn't # supported by the one or two programs in a package. if [ -n "${notsupp}" ] && [ -z "${norecursion}" ]; then # If $appdirs is non-empty, at least one of those directories must still # be configured, or we error out. (E.g., if the gas release supports a # specified target in some subdirs but not the gas subdir, we shouldn't # pretend that all is well.) if [ -n "$appdirs" ]; then for dir in $appdirs ; do if [ -r $dir/Makefile.in ] && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1 ; then appdirs="" break fi done if [ -n "$appdirs" ]; then echo "*** This configuration is not supported by this package." 1>&2 exit 1 fi fi # Okay, some application will build, or we don't care to check. Still # notify of subdirs not getting built. echo "*** This configuration is not supported in the following subdirectories:" 1>&2 echo " ${notsupp}" 1>&2 echo " (Any other directories should still work fine.)" 1>&2 fi # Set with_gnu_as and with_gnu_ld as appropriate. # # This is done by determining whether or not the appropriate directory # is available, and by checking whether or not specific configurations # have requested that this magic not happen. # # The command line options always override the explicit settings in # configure.in, and the settings in configure.in override this magic. # # If the default for a toolchain is to use GNU as and ld, and you don't # want to do that, then you should use the --without-gnu-as and # --without-gnu-ld options for the configure script. if [ x${use_gnu_as} = x ] ; then if [ x${with_gnu_as} != xno ] && echo " ${configdirs} " | grep " ${gasdir} " > /dev/null 2>&1 && [ -d ${srcdir}/${gasdir} ] ; then with_gnu_as=yes withoptions="$withoptions --with-gnu-as" fi fi if [ x${use_gnu_ld} = x ] ; then if [ x${with_gnu_ld} != xno ] && echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 && [ -d ${srcdir}/ld ] ; then with_gnu_ld=yes withoptions="$withoptions --with-gnu-ld" fi fi # # Local Variables: # fill-column: 131 # End: #