# Build all of the targets for any given host.....
#
# This file is going to be ugly.  It will be VERY specific to the
# Cygnus environment and build-process.
#
# Useful targets (rt = recursion target):
# (please correct or expand on this)
# FIXME: Might some of these be superfluous?
#
# all-emacs
# all-cygnus	- set up install directories, build 3stage native and all
#		supported cross targets, then check 3stage'd native
#		(rt = $(canonhost)-stamp-3stage-done, do-cygnus for cross)
# native	- set up install directories, build 3stage native
#		(rt = $(canonhost)-stamp-3stage-1)
# build-cygnus	- build 3stage native and all supported cross targets
#		(rt = $(canonhost)-stamp-3stage-done, build-cygnus for cross)
# build-latest	- build all supported cross targets
#		(rt = build-latest)
# all-native	- set up install directories, build native
#		(rt = do-native)
# all-cross	- set up install directories, build all targets
#		(rt = do-cygnus)
# config	- configure native and all supported cross targets
#		(rt = do1-config, do-native-config for cross)
# build		- build native and all supported cross targets
#		(rt = do1-build, build-native for cross)
# 3build	- build 3stage native and all supported cross targets
#		(rt = all, build-cygnus for cross)
# build-all-latest - build 3stage native and all supported cross targets
#		(rt = $(canonhost)-stamp-3stage-done, build-latest for cross)
# clean		- remove objdir directories, stamp files
#		(rt = clean)
#
# To configure/build for fewer targets, specify TARGETS="native cross1 ...".
  
TREE = devo
include $(TREE)/release-info

TEST_INSTALL_DISK = /dumbo

INSTALLDIR = $(TEST_INSTALL_DISK)/$(TREE)-test/$(RELEASE_TAG)

ifndef host
host := $(shell $(TREE)/config.guess)
endif

NATIVE  = native

GCC	 = gcc
CFLAGS	 = -g
GNUCFLAGS= -g -O2
CXXFLAGS = -g -O2
MAKEINFOFLAGS =

log	= 1>$(canonhost)-build-log 2>&1
clog	= 1>$(canonhost)-check-log 2>&1
cyglog    = 1> $(canonhost)-x-$$i-cygnus-build-log 2>&1
latestlog = 1> $(canonhost)-x-$$i-latest-build-log 2>&1
natlog    = 1> $(canonhost)-x-$$i-native-build-log 2>&1

canonhost := $(shell $(TREE)/config.sub $(host))

# Convert config.guess results to a simpler form.
ifeq ($(canonhost),sparc-sun-solaris2.1)
canonhost := sparc-sun-solaris2
endif
ifeq ($(canonhost),sparc-sun-solaris2.3)
canonhost := sparc-sun-solaris2
endif
ifeq ($(canonhost),mips-dec-ultrix4.2)
canonhost := mips-dec-ultrix
endif
ifeq ($(canonhost),mips-sgi-irix4.0.1)
canonhost := mips-sgi-irix4
endif
ifeq ($(canonhost),mips-sgi-irix4.0.5H)
canonhost := mips-sgi-irix4
endif
ifeq ($(canonhost),mips-sgi-irix5.2)
canonhost := mips-sgi-irix5
endif
ifeq ($(canonhost),rs6000-ibm-aix3.2)
canonhost := rs6000-ibm-aix
endif
ifeq ($(canonhost),i486-unknown-sco3.2v4.0)
canonhost := i386-sco3.2v4
endif
ifeq ($(canonhost),i386-unknown-sco3.2v4.0)
canonhost := i386-sco3.2v4
endif
ifeq ($(canonhost),i386-unknown-sco3.2v4)
canonhost := i386-sco3.2v4
endif
ifeq ($(canonhost),i386-unknown-go32)
canonhost := i386-go32
endif
ifeq ($(canonhost),i386-unknown-sysv4.2)
canonhost := i386-sysv4.2
endif
ifeq ($(canonhost),i386-lynx-lynxos)
canonhost := i386-lynx
endif
ifeq ($(canonhost),m68k-lynx-lynxos)
canonhost := m68k-lynx
endif
ifeq ($(canonhost),sparc-lynx-lynxos)
canonhost := sparc-lynx
endif
ifeq ($(canonhost),rs6000-lynx-lynxos)
canonhost := rs6000-lynx
endif
ifeq ($(canonhost),i386-unknown-linux)
canonhost := i386-linux
endif
ifeq ($(canonhost),i486-unknown-linux)
canonhost := i486-linux
endif
ifeq ($(canonhost),i586-unknown-linux)
canonhost := i486-linux
endif
ifeq ($(canonhost),i386-unknown-linuxaout)
canonhost := i386-linuxaout
endif
ifeq ($(canonhost),i486-unknown-linuxaout)
canonhost := i486-linuxaout
endif
ifeq ($(canonhost),i586-unknown-linuxaout)
canonhost := i486-linuxaout
endif

#
# The following TARGETS variable settings probably ought to
# be made automatically from the 
# /s1/cygnus/progressive/host-target-pairs.tbl file, using
# the /s1/cygnus/progressive/targets script.  But, be sure
# that the native is spelled 'native'.
#

ifeq ($(canonhost),sparc-sun-sunos4.1.3)
TARGETS = $(NATIVE) \
	i386-go32 	\
	a29k-amd-udi 	\
	h8300-hms 	h8500-hms \
	hppa1.1-hp-proelf \
	i386-aout	i386-elf \
	i960-nindy-coff	i960-vxworks5.0	i960-vxworks5.1 \
	m68k-aout	m68k-coff 	m68k-elf	m68k-vxworks5.1 \
	mips-idt-ecoff	mips64-elf	mips-elf \
	sh-hms 	\
	sparc-aout	sparc64-aout	sparc-vxworks \
	sparclite-aout  sparclite-coff	sparclite-vxworks \
	z8k-coff \
	OSE68000 OSE68k mips-ncd-elf i386-unixware
# The OSE68000 and OSE68k targets are for Ericsson only.
GCC = gcc -O2 -pipe
all: all-cygnus
endif

ifeq ($(canonhost),m68k-sun-sunos4.1.1)
TARGETS = $(NATIVE)
GCC = gcc -O2 -msoft-float
CC = cc -J
all: all-cygnus
endif

ifeq ($(canonhost),sparc-sun-solaris2)
TARGETS = $(NATIVE) \
	a29k-amd-udi \
	h8300-hms 	h8500-hms \
	hppa1.1-hp-proelf \
	i960-vxworks5.0 i960-vxworks5.1 \
	m68k-aout	m68k-coff 	m68k-vxworks5.1	m88k-coff \
	mips-idt-ecoff	mips-elf \
	sparc64-elf	sparclite-aout sparclite-coff \
	OSE68000 OSE68k \
	sparc-sun-sunos4.1.3
# The latter assures that BNR's special build (which they now
# do for themselves from sources) hasn't developed bit-rot.
# The OSE68000 and OSE68k targets are for Ericsson only.

CC = cc
GCC = gcc -O2 -pipe
all: all-cygnus
endif

ifeq ($(canonhost),mips-dec-ultrix)
TARGETS = $(NATIVE) m68k-aout
CC = cc -Wf,-XNg1000
all: all-cygnus
endif

ifeq ($(patsubst alpha-dec-osf%,alpha,$(canonhost)),alpha)
TARGETS = $(NATIVE)
CC = cc
all: all-cygnus
endif

ifeq ($(canonhost),mips-sgi-irix4)
TARGETS	= $(NATIVE) \
	mips-idt-ecoff \
	mips-elf mips64-elf \
	sh-hms
CC = cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000
all: all-cygnus
endif

ifeq ($(canonhost),mips-sgi-irix5)
TARGETS	= $(NATIVE) \
	mips-idt-ecoff \
	mips-elf mips64-elf \
	sh-hms
CC = cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000
all: all-cygnus
endif

ifeq ($(canonhost),powerpc-ibm-aix4.1.1)
TARGETS	= $(NATIVE)
all: all-cygnus
endif

ifeq ($(canonhost),rs6000-ibm-aix)
TARGETS	= $(NATIVE) \
	i960-vxworks5.0 i960-vxworks5.1 \
	m68k-aout
all: all-cygnus
endif

ifeq ($(canonhost),rs6000-ibm-aix3.2.5)
TARGETS	= $(NATIVE) \
	i960-vxworks5.0 i960-vxworks5.1 \
	m68k-aout
all: all-cygnus
endif

ifeq ($(canonhost),m68k-hp-hpux)
TARGETS	= $(NATIVE)	m68k-aout
TMPDIR := $(shell mkdir $(canonhost)-tmpdir; cd $(canonhost)-tmpdir ; pwd)
CC = cc -Wp,-P,-H256000
#CFLAGS = +O1000 
CFLAGS = -g
all: all-cygnus
endif

ifeq ($(canonhost),hppa1.1-hp-hpux)
TARGETS = \
	$(NATIVE) \
	h8300-hms \
	hppa1.1-hp-proelf \
	i960-vxworks5.0 i960-vxworks5.1 \
	m68k-aout  m68k-coff  m68k-vxworks5.1
CC = cc -Wp,-H256000
#CFLAGS = +Obb2000
CFLAGS = -g
all: all-cygnus
endif

ifeq ($(canonhost),i386-sco3.2v4)
TARGETS = $(NATIVE)
all: all-cygnus
endif

ifeq ($(canonhost),i386-go32)
TARGETS = \
	a29k-amd-udi \
	h8300-hms 	hppa1.1-hp-proelf \
	i386-aout 	\
	m68k-aout	m68k-coff \
	mips-elf	mips-idt-ecoff	mips64-elf \
	sh-hms 		\
	sparc-aout	sparclite-aout	sparclite-coff
CC = i386-go32-gcc
GCC = i386-go32-gcc -O2
CFLAGS =
CXXFLAGS = -O2
MAKEINFOFLAGS = --no-split
all: all-dos
endif

ifeq ($(canonhost),i386-sysv4.2)
TARGETS = $(NATIVE) i386-netware
CC = cc
all: all-cygnus
endif

ifeq ($(canonhost),i386-ncr-sysv4.3)
TARGETS = $(NATIVE)
CC = cc
CFLAGS = -Hnocopyr
SHELL = /usr/unsupported/bin/bash
CONFIG_SHELL = /usr/unsupported/bin/bash
all: all-cygnus
endif

ifeq ($(canonhost),i386-lynx)
TARGETS = $(NATIVE)
CC = /usr/cygnus/progressive/bin/gcc
all: all-cygnus
SHELL=/bin/bash
endif

ifeq ($(canonhost),m68k-lynx)
TARGETS = $(NATIVE)
CC = /usr/cygnus/progressive/bin/gcc
all: all-cygnus
SHELL=/bin/bash
endif

ifeq ($(canonhost),sparc-lynx)
TARGETS = $(NATIVE)
CC = /usr/cygnus/progressive/bin/gcc
all: all-cygnus
SHELL=/bin/bash
endif

ifeq ($(canonhost),rs6000-lynx)
TARGETS = $(NATIVE)
CC = /usr/cygnus/progressive/bin/gcc
all: all-cygnus
SHELL=/bin/bash
endif

ifeq ($(patsubst %-linux,linux,$(patsubst %-linuxaout,linux,$(canonhost))),linux)
TARGETS = $(NATIVE)
all: all-cygnus
endif

FLAGS_TO_PASS := \
	"GCC=$(GCC)" \
	"CC=$(CC)" \
	"CFLAGS=$(CFLAGS)" \
	"GNUCFLAGS=$(GNUCFLAGS)" \
	"CXXFLAGS=$(CXXFLAGS)" \
	"host=$(canonhost)" \
	"MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
	"RELEASE_TAG=$(RELEASE_TAG)" \
	"SHELL=$(SHELL)"

# set GNU_MAKE and CONFIG_SHELL correctly in sub-builds
ifeq ($(patsubst %-lynx,lynx,$(canonhost)),lynx)
FLAGS_TO_PASS := $(FLAGS_TO_PASS) "GNU_MAKE=$(MAKE)" "CONFIG_SHELL=/bin/bash"
endif

ifeq ($(patsubst %-linux,linux,$(patsubst %-linuxaout,linux,$(canonhost))),linux)
FLAGS_TO_PASS := $(FLAGS_TO_PASS) "GNU_MAKE=$(MAKE)"
endif

ifeq ($(patsubst %i386-ncr-sysv4.3,ncr,$(canonhost)),ncr)
FLAGS_TO_PASS := $(FLAGS_TO_PASS) "CONFIG_SHELL=/usr/unsupported/bin/bash"
endif

all-emacs:
	@echo build started at `date`
	[ -d $(INSTALLDIR) ] || mkdir $(INSTALLDIR)
	-rm -f $(ROOTING)/$(RELEASE_TAG)
	ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG) 
	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do1 > $(canonhost)-emacs-native-log 2>&1 
	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do-latest > $(canonhost)-emacs-latest-log 2>&1 
	@echo done at `date`

all-cygnus:
	@echo build started at `date`
	[ -d $(INSTALLDIR) ] || mkdir $(INSTALLDIR)
	-rm -f $(ROOTING)/$(RELEASE_TAG) && ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG) 
#
#      The following line to be used during regular progressive builds
#      to help developers test, but should be commented out for final
#      progressive build.
#
#      -rm -f $(ROOTING)/progressive-beta && ln -s $(RELEASE_TAG) $(ROOTING)/progresssive
	@for i in $(TARGETS) ; do \
	  if [ "$$i" = "native" ] ; then \
            if [ ! -f $(canonhost)-stamp-3stage-done ] ; then \
	      echo "3staging $(canonhost) native" ; \
	      echo Flags passed to make: $(FLAGS_TO_PASS) ; \
	      if $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-stamp-3stage-done $(log); then \
	        echo "     completed successfully" ; \
	      else \
		exit 1; \
	      fi; \
	    else \
	      true ; \
	    fi ; \
	  else \
	    echo "building $(canonhost) cross to $$i" ; \
            $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i do-cygnus $(cyglog) && \
	       echo "     completed successfully" ; \
	  fi ; \
	done
	@if [ ! -f $(canonhost)-stamp-3stage-checked ] ; then \
	  echo checking $(canonhost) native ; \
	  $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-check-3stage $(clog) ; \
	  touch $(canonhost)-stamp-3stage-checked ; \
	else \
	  true ; \
	fi
	@echo done at `date`

native:
	@echo build started at `date`
	[ -d $(INSTALLDIR) ] || mkdir $(INSTALLDIR)
	-rm -f $(ROOTING)/$(RELEASE_TAG) && ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
#	-rm -f $(ROOTING)/progressive-beta && ln -s $(RELEASE_TAG) $(ROOTING)/progressive-beta
	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-stamp-3stage-done $(log)
	@echo done at `date`

build-cygnus:
	@echo build started at `date`
	@for i in $(TARGETS) ; do \
	  if [ "$$i" = "native" ] ; then \
            if [ ! -f $(canonhost)-3stage-done ] ; then \
	      echo "3staging $(canonhost) native" ; \
	      $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-stamp-3stage-done $(log) && \
	         echo "     completed successfully" ; \
	    fi ; \
	  else \
	    echo "building $(canonhost) cross to $$i:" `date` ; \
            $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-cygnus $(cyglog) && \
	       echo "     completed successfully" ; \
	  fi ; \
	done
	@echo done at `date`

build-latest:
	@echo build started at `date`
	@for i in $(TARGETS) ; do \
	  if [ "$$i" != "native" ] ; then \
	    echo "building $(canonhost) cross to $$i:" `date` ; \
	    $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-latest $(latestlog) && \
	       echo "     completed successfully" ; \
	  fi ; \
	done
	@echo done at `date`

all-native:
	[ -d $(INSTALLDIR) ] || mkdir $(INSTALLDIR)
	rm -f $(ROOTING)/$(RELEASE_TAG)
	ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
	@for i in $(TARGETS) ; do \
	    echo "building $(canonhost) cross to $$i" ; \
            $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i do-native $(natlog) && \
	       echo "     completed successfully" ; \
	done

all-cross:
	[ -d $(INSTALLDIR) ] || mkdir $(INSTALLDIR)
	rm -f $(ROOTING)/$(RELEASE_TAG)
	ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
	@for i in $(TARGETS) ; do \
	    echo "building $(canonhost) cross to $$i" ; \
            $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build=$(build) do-cygnus $(cyglog) && \
	       echo "     completed successfully" ; \
	done

do-dos:
        $(MAKE) -f build-all.mk build=$(host) host=i386-go32 all-dos
all-dos:
        @for i in $(TARGETS) ; do \
            echo "building $(canonhost) cross to $$i" ; \
            $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) host=$(host) target=$$i do-dos $(cyglog) && \
               echo "     completed successfully at `date`" ; \
        done

config:
	@for i in $(TARGETS) ; do \
	  if [ "$$i" = "native" ] ; then \
	    echo "config stage1 for $(canonhost)" ; \
	    $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do1-config $(log) && \
	       echo "     completed successfully" ; \
	  else \
	    echo "config $(canonhost) cross to $$i" ; \
            $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i do-native-config $(cyglog) && \
	       echo "     completed successfully" ;  \
	  fi ; \
	done


build:
	@for i in $(TARGETS) ; do \
	  if [ "$$i" = "native" ] ; then \
	    $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do1-build $(log) && \
	       echo "     completed successfully" ; \
	  else \
	    echo "building $(canonhost) cross to $$i" ; \
            $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-native $(natlog) && \
	       echo "     completed successfully" ; \
	  fi ; \
	done


3build:
	@for i in $(TARGETS) ; do \
	  if [ "$$i" = "native" ] ; then \
	    echo "building 3stage for $(canonhost)" ; \
	    $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) all $(log) && \
	       echo "     completed successfully" ; \
	  else \
	    echo "building $(canonhost) cross to $$i" ; \
            $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-cygnus $(cyglog) && \
	       echo "     completed successfully" ; \
	  fi ; \
	done

build-all-latest:
	@for i in $(TARGETS) ; do \
	  if [ "$$i" = "native" ] ; then \
	    echo "building 3stage for $(canonhost)" ; \
	    $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-stamp-3stage-done $(log) && \
	       echo "     completed successfully" ; \
	  else \
	    echo "building $(canonhost) cross to $$i" ; \
            $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-latest $(cyglog) && \
	       echo "     completed successfully" ; \
	  fi ; \
	done

clean:
	$(MAKE) -f test-build.mk $(FLAGS_TO_PASS) clean $(log)

### Local Variables:
### fill-column: 131
### End: