2001-07-24 H.J. Lu * binutils-all/windres/windres.exp: Set xfail on none-ix86/pe targets. 2001-07-18 DJ Delorie * config/default.exp (WINDRES): Add. * binutils-all/windres/windres.exp: New. * binutils-all/windres/README: New. * binutils-all/windres/bmp1.bmp: New. * binutils-all/windres/bmpalign.rc: New. * binutils-all/windres/bmpalign.rsd: New. * binutils-all/windres/lang.rc: New. * binutils-all/windres/lang.rsd: New. * binutils-all/windres/msupdate: New. * binutils-all/windres/strtab1.rc: New. * binutils-all/windres/strtab1.rsd: New. 2001-07-05 Ben Elliston * lib/utils-lib.exp (target_assemble): Remove duplicate copy. (default_target_assemble): Likewise. 2001-06-18 Thiemo Seufer * binutils-all/readelf.exp: Typo. 2001-06-19 Andreas Jaeger * binutils-all/readelf.r: Don't check for specific info value to pass testsuite on ia64 and alpha. 2001-06-07 H.J. Lu * binutils-all/readelf.ss-mips: Support stabs. * binutils-all/readelf.ss-tmips: Likewise. 2001-05-25 H.J. Lu * binutils-all/readelf.exp (readelf_test): Set target_machine to tmips for traditional mips. * binutils-all/readelf.s: Support traditional mips. * binutils-all/readelf.ss-tmips: New for traditional mips. 2001-05-25 Alan Modra * binutils-all/readelf.exp: Replace linuxoldld with linux*oldld and linuxaout with linux*aout. * binutils-all/objcopy.exp: Remove xfail for linuxaout. 2001-05-24 H.J. Lu * binutils-all/objdump.exp (cpus_expected): Add s390. 2001-03-30 H.J. Lu * binutils-all/readelf.exp: Run on more ELF targets. 2001-02-11 H.J. Lu * config/default.exp: Set up gcc_gas_flag. * binutils-all/objcopy.exp (copy_setup): Process gcc_gas_flag for Linux only. * binutils-all/testprog.c: Include and don't use exit (). 2001-01-16 Matthew Green * binutils-all/readelf.s-64: Match readelf -S output. 2000-12-09 Nick Clifton * binutils-all/objdump.exp (cpus_expected): Add tic54x and tms320c54x. 2000-11-28 Hans-Peter Nilsson * binutils-all/readelf.s: Adjust to readelf.c formatting changes. 2000-11-02 Chris Demetriou * binutils-all/readelf.exp (regexp_diff): Add code from gas testsuite to treat "#..." at beginning of line as an indicator to skip extra non-matching lines at that location. (readelf_test): Add support for using a machine-specific regexp comparison file. (readelf -S test, readelf -s test): Remove v850*-*-* and mips*-*-* from list of expected failures. * binutils-all/readelf.s: Accomodate changes due to additional sections (and therefore section numbering differences) on v850*-*-* and mips*-*-* targets. * binutils-all/readelf.ss: Likewise. * binutils-all/readelf.ss-mips: New file, which matches expected output of readelf -s test for mips*-*-*. 2000-10-25 Hans-Peter Nilsson * binutils-all/readelf.exp (-wi test): Add cris-*-* to xfails. 2000-10-19 Chris Demetriou * binutils-all/readelf.exp (readelf_test): Work properly when multiple targets expect failtures. (readelf -S test, readelf -s test): Expect mips*-*-* to fail. 2000-07-10 Alan Modra * lib/utils-lib.exp (default_binutils_assemble): Don't do the hppa sed fudges for hppa-linux. 2000-07-01 Frank Ch. Eigler * binutils-all/objdump.exp (cpus_expected, cpus_regex): Reorganize syntax to display more tcl nature. 2000-06-18 Stephane Carrez * binutils-all/objdump.exp (cpus_expected): Recognize m68hc11 and m68hc12. 2000-06-18 Nick Clifton * binutils-all/readelf.wi: Do not assume the compilation tag to be unit 1. * binutils-all/objcopy.exp: Expect all arm variants to fail the copying executable test. 2000-06-14 Hans-Peter Nilsson * binutils-all/readelf.exp (regexp_diff): Do not break when a mismatching line is found. (readelf_find_size): New. (readelf_size): New global variable. (readelf_test): Add newline to send_log of command. If $srcdir/$subdir/$regexp_file-$readelf_size exists, use it instead of $srcdir/$subdir/$regexp_file. (*-*elf test): Fix typo in message. * binutils-all/readelf.s-64: New. * binutils-all/readelf.ss-64: New. 2000-05-02 Alan Modra * binutils-all/objcopy.exp (simple copy): Clear xfail for hppa-linux. * binutils-all/hppa/objdump.exp: Disable test for elf. 2000-03-13 Nick Clifton * binutils-all/readelf.s: Adjust to match new format of readelf output. * binutils-all/readelf.ss: Adjust to match new format of readelf output. 1999-11-01 Nick Clifton * binutils-all/objcopy.exp: Expect simple objcopy test to fail for COFF based ARM and Thumb ports. Tue Sep 14 00:28:17 1999 Jeffrey A Law (law@cygnus.com) * binutils-all/hppa/objdump.exp: Do not run for PA64. 1999-09-04 Steve Chamberlain * binutils-all/objdump.exp: Add pj to cpus_expected. Sat Aug 28 00:24:27 1999 Jerry Quinn * binutils-all/hppa/freg.s: New file. * binutils-all/hppa/objdump.exp: Add freg.s test. 1999-08-09 Ian Lance Taylor * binutils-all/objcopy.exp: Add setup_xfail for simple copy test for i*86-*-msdos*. 1999-07-21 H.J. Lu * binutils-all/testprog.c: Include . 1999-06-29 Nick Clifton * binutils-all/objdump.exp: Add fr30 and MCore to expected cpus list. * binutils-all/readelf.r: Do not assume a fixed number of spaces in the output. 1999-06-10 Nick Clifton * binutils-all/readelf.wi: Update to match latest output. * binutils-all/readelf.h: Update to match latest output. Wed Jun 9 11:59:22 1999 Andreas Schwab * binutils-all/objdump.exp: Tighten regexp to match `objdump -i' output to avoid massive exponential behaviour. 1999-05-28 Ian Lance Taylor * binutils-all/readelf.h: Update for changes of 1999-04-08. 1999-03-12 Nick Clifton * binutils-all/readelf.wi: Remove FR30 specific components. * binutils-all/readelf.s: Remove RELA specific components. 1999-02-16 Nick Clifton * binutils-all/readelf.s: Do not assume section alignment is 4. * binutils-all/readelf.r: Do not assume rela's are being used. * binutils-all/readelf.exp: disable tests for non ELF based targets. 1999-02-02 Nick Clifton * binutils-all/readelf.wi: Amend to match new readelf output. * binutils-all/readelf.r: Do not assume that RELAs will be used. 1999-01-29 Nick Clifton * config/default.exp: Add definitions of READELF and READELFFLAGS. * binutils-all/readelf.exp: New file: Readelf tests * binutils-all/readelf.h: New file: Expected results for 'readelf -h' * binutils-all/readelf.s: New file: Expected results for 'readelf -S' * binutils-all/readelf.ss: New file: Expected results for 'readelf -s' * binutils-all/readelf.r: New file: Expected results for 'readelf -r' * binutils-all/readelf.wi: New file: Expected results for 'readelf -wi' Wed Dec 9 19:11:39 1998 Jeffrey A Law (law@cygnus.com) * binutils-all/objcopy.exp (copy_executable): Expect comparison failure for mips*-*-elf. Fri Oct 16 22:57:12 1998 Felix Lee * binutils-all/objcopy.exp: fix "no symbols" message. Tue Jul 28 15:14:04 1998 Jeffrey A Law (law@cygnus.com) * binutils-all/objcopy.exp: Keep "main" and "_main" for strip with saving symbol tests. Look for either "main" or "_main" in the output file. Fix test for "no symbols" in the output file. 1998-07-22 Vladimir N. Makarov * binutils-all/objcopy.exp: Polish output about fail for objcopy (simple copy), strip with/without saving a symbol for object file and executable. Wed Jul 1 16:27:40 1998 Nick Clifton * binutils-all/objcopy.exp: ARM simple objcopy now passes. Wed Jun 24 09:20:21 1998 Nick Clifton * binutils-all/objdump.exp: Look for '.data' rather than 'data' when parsing output of objdump -h. * binutils-all/size.exp: Look for '.data' rather than 'data' when parsing output of size -A. 1998-07-20 Vladimir N. Makarov * binutils-all/objcopy.exp: Two new tests - strip object file with saving a symbol and strip executable file with saving a symbol. Fri May 29 14:50:24 1998 Ian Lance Taylor * binutils-all/objcopy.exp: Don't xfail the simple objcopy test when cross compiling. Thu Nov 6 14:32:37 1997 Bob Manson * lib/utils-lib.exp: Temporary definition of target_assemble and default_target_assemble so that testing can work with older dejagnu versions. Wed Sep 24 12:09:15 1997 Bob Manson * binutils-all/objcopy.exp(strip_executable): Make a new copy of the executable being tested. Mon Sep 15 21:25:20 1997 Bob Manson * binutils-all/objcopy.exp: Compile the executables to be tested on the target with a status wrapper (as necessary). * binutils-all/ar.exp: If testing on a remote host, don't bother looking on the local host for the program being tested. Use the correct filenames on the remote host. * binutils-all/nm.exp: Ditto. * binutils-all/size.exp: Ditto. * binutils-all/objdump.exp: Ditto. (cpus_expected): Add the target CPU to the regexp of CPUs to be expected, if it's not already there. Thu Aug 28 09:57:27 1997 Doug Evans * binutils-all/objdump.exp (cpus_expected): Add arc. Tue Aug 5 00:03:20 1997 Ian Lance Taylor * config/default.exp: Look for nm-new and strip-new. Tue Jun 3 17:12:54 1997 Bob Manson * config/default.exp: Remove expect_before statement. * binutils-all/objcopy.exp: Don't use global exec_output variable; the output is returned from remote_load instead. Mon May 12 22:14:20 1997 Bob Manson * binutils-all/objcopy.exp(strip_test): Tests that fail to compile are untested, not unresolved. (copy_setup): Ditto. * lib/utils-lib.exp(default_binutils_assemble): Call target_assemble instead of target_compile. Wed Apr 30 20:37:51 1997 Bob Manson Changes to support multilib and remote hosted testing, along with general cleanups and simplifications. * lib/utils-lib.exp(binutil_version): Use remote_exec. (default_binutils_run): Ditto. (default_binutils_assemble): Remove first argument; call target_compile to actually do the assembly. (default_binutils_compile,default_binutils_remove,prune_warnings): Delete. * config/default.exp: Remove AS and ASFLAGS. (binutils_compile,binutils_remove): Delete. (binutils_assemble): Remove first argument. * binutils-all/ar.exp: See if we're running the tests on a remote host, and download/upload files as appropriate. Replace calls to binutils_remove with remote_file. Replace calls to binutils_compile with target_compile. Remove initial argument to binutils_assemble. Use remote_load to execute programs on the target. * binutils-all/nm.exp: Ditto. * binutils-all/objcopy.exp: Ditto. * binutils-all/objdump.exp: Ditto. * binutils-all/size.exp: Ditto. Mon Apr 14 12:36:41 1997 Ian Lance Taylor * binutils-all/ar.exp (long_filenames): Check for a file system with a 14 character file name length limit. Tue Apr 1 09:52:15 1997 Jeffrey A Law (law@cygnus.com) * binutils-all/objdump.exp: Handle d10v. Fri Feb 7 16:45:34 1997 Bob Manson * binutils-all/ar.exp: Use prune_warnings instead of prune_system_crud. * binutils-all/objcopy.exp: Ditto. Wed Jan 29 00:16:43 1997 Bob Manson * binutils-all/nm.exp: Use / between $srcdir and $subdir. * binutils-all/objcopy.exp: Ditto. * binutils-all/objdump.exp: Ditto. * binutils-all/size.exp: Ditto. * binutils-all/hppa/objdump.exp: Ditto. Wed Oct 16 22:57:59 1996 Jeffrey A Law (law@cygnus.com) * binutils-all/objdump.exp: Add mn10200 and mn10300 to expected cpus list. Tue Oct 1 15:06:55 1996 Ian Lance Taylor * lib/utils-lib.exp (binutil_version): Fix for current version printing. Sun Aug 4 22:25:40 1996 Ian Lance Taylor * binutils-all/objcopy.exp: Fix end of line matching in srec tests to work with TCL 7.5. Sat Jun 29 12:51:30 1996 Ian Lance Taylor * binutils-all/objcopy.exp: Simple copy test works for i960 b.out targets. Mon Jun 24 14:33:04 1996 Ian Lance Taylor * binutils-all/objcopy.exp: On OSF/1, the simple copy test will succeed with gas, and fail with /bin/as, so mark it as an expected failure only if it fails. Tue Mar 26 16:55:08 1996 Jeffrey A Law (law@cygnus.com) * binutils-all/objcopy.exp: No longer expect adjust-section-vma test to fail for hppa*-*-proelf*. Mon Mar 11 08:25:14 1996 Jeffrey A Law (law@cygnus.com) * binutils-all/objdump.exp: Look for "$CODE$", not just "CODE". Wed Jan 31 11:55:13 1996 Jeffrey A Law (law@cygnus.com) * binutils-all/objcopy.exp: Expect adjust-section-vma tests to fail for hppa*-*-proelf* targets. Thu Jan 25 13:53:04 1996 Ian Lance Taylor * binutils-all/objdump.exp: Update for objdump -h format change. * binutils-all/objcopy.exp: Likewise. Mon Jan 15 18:14:14 1996 Ian Lance Taylor * binutils-all/objcopy.exp: Use the lma, not the vma, when testing address adjustments. Fri Dec 15 16:31:55 1995 Ian Lance Taylor * binutils-all/objdump.exp: Update objdump -i test for current objdump output. Mon Nov 27 15:15:09 1995 Ian Lance Taylor * binutils-all/objcopy.exp: Correct fail calls to always use the same string as the pass call. Wed Nov 22 13:18:58 1995 Ian Lance Taylor * lib/utils-lib.exp (prune_system_crud): Discard -g -O warnings from native compilers on OSF/1 and SunOS. Fri Nov 17 10:36:09 1995 Ian Lance Taylor * lib/utils-lib.exp (default_binutils_compiler: Change error message to say compilation rather than assembly. Wed Nov 15 18:34:42 1995 Ken Raeburn * binutils-all/objcopy.exp: Simple copy test does appear to work on i*86-svr4. Wed Nov 15 12:19:28 1995 Ian Lance Taylor * binutils-all/objcopy.exp: If assembly fails, call unresolved. Test running objcopy and strip on a final executable. * binutils-all/testprog.c: New file. * config/default.exp (STRIP, STRIPFLAGS): Define. (binutils_compile): New procedure. * lib/utils-lib.exp (default_binutils_compile): New procedure. Fri Nov 3 13:22:33 1995 Ian Lance Taylor * lib/utils-lib.exp (default_binutils_run): Don't use verbose -log, reverting part of Oct 2 change. Wed Nov 1 15:09:57 1995 Manfred Hollstein KS/EF4A 60/1F/110 #40283 * binutils-all/objcopy.exp: Add setup_xfails for m68*-motorola-sysv* and m88*-motorola-sysv*. Wed Oct 4 14:38:31 1995 Ian Lance Taylor * binutils-all/nm.exp: Add setup_xfails for XCOFF. Mon Oct 2 12:41:48 1995 Ian Lance Taylor * binutils-all/ar.exp: New file. * binutils-all/bintest.s: Make text_symbol and data_symbol global. Add new static symbols static_text_symbol and static_data_symbol. * binutils-all/nm.exp: Adjust accordingly. * config/default.exp (AR): Set if not set. (binutils_remove): New procedure. * lib/utils-lib.exp (default_binutils_run): Call prune_system_crud on program output. Use verbose -log instead of both verbose and send_log. (default_binutils_remove): New procedure. * lib/utils-lib.exp (default_binutils_assemble): Call prune_system_crud on assembler output. Tue Sep 26 14:07:05 1995 Ian Lance Taylor * binutils-all/objcopy.exp: Add setup_xfails for simple copy test for i386 COFF targets. Wed Sep 13 13:20:21 1995 Ian Lance Taylor * lib/utils-lib.exp (prune_system_crud): Define if not defined. * binutils-all/objcopy.exp: Call prune_system_crud on cmp output. Sat Aug 19 17:38:06 1995 Ian Lance Taylor * binutils-all/objcopy.exp: Add xfail for i*86-*-aout* for simple copy test. Wed Aug 16 16:52:53 1995 Ian Lance Taylor * binutils-all/nm.exp: Add setup_xfail for mips*-sony-bsd* for tests which fail on ECOFF targets. * binutils-all/objcopy.exp: Change i*86-*-linux xfail for simple copy test to check for i*86-*-linuxaout* instead. Tue Aug 8 17:48:37 1995 Ian Lance Taylor * binutils-all/objcopy.exp: Add setup_xfail for a29k-*-vxworks* for simple copy test. Tue Jul 25 11:57:12 1995 Ian Lance Taylor * binutils-all/objcopy.exp: Change setup_xfail for simple copy test from i960-*-vxworks5.1 to i960-*-vxworks*. Mon Jul 10 12:25:46 1995 Ian Lance Taylor * binutils-all/objcopy.exp: Add setup_xfail for z8*-*-coff for simple copy test. * binutils-all/objdump.exp (cpus_expected): Add z8001 and z8002. Sun May 21 20:32:53 1995 Jeff Law (law@snake.cs.utah.edu) * binutils-all/hppa/objdump.exp (addendbug): Handle PA ELF targets too. * binutils-all/objcopy.exp (simple copy): Don't expect PA ELF targets to fail. Tue Apr 4 14:52:08 1995 Jeff Law (law@snake.cs.utah.edu) * binutils-all/hppa: Renamed from binutils-hppa. Wed Mar 29 12:02:43 1995 Ian Lance Taylor * binutils-all/objcopy.exp: Add setup_xfail for simple copy test for h8500-*-hms and h8500-*-coff. Tue Mar 28 11:18:28 1995 Ian Lance Taylor * binutils-all/objcopy.exp: Add setup_xfail for simple copy test for m68*-ericsson-ose and m88*-*-coff. Mon Mar 27 11:27:31 1995 Ian Lance Taylor * binutils-all/objcopy.exp: Add setup_xfail for simple copy test for m68*-*-vxworks*. Fri Mar 24 11:44:25 1995 Ian Lance Taylor * binutils-hppa/objdump.exp: Correct hppa*-*-* check. Tue Mar 21 10:48:45 1995 Jeff Law (law@snake.cs.utah.edu) * binutils-hppa/addendbug.s: New testcase. * binutils-hppa/objdump.exp: Run it. Mon Mar 20 11:31:05 1995 Ian Lance Taylor * lib/utils-lib.exp (default_binutils_run): Quote any dollar signs in progargs before passing it to exec. Fri Mar 17 16:39:31 1995 Jeff Law (law@snake.cs.utah.edu) * config/hppa.sed: Sed script to transform bintest.s into proper PA assembly code. * binutils-all/nm.exp: Enable these tests on the PA. * binutils-all/objcopy.exp: Enable these tests on the PA. Expect simple copy to fail. * binutils-all/objdump.exp: Enable these tests on the PA. Handle "CODE" as a section name. * binutils-all/size.exp: Enable these tests on the PA. * lib/utils-lib.exp (default_binutils_assemble): For "hppa*-*-*", run the assembly through a sed script before passing it to the assembler. Wed Mar 15 16:47:13 1995 Ian Lance Taylor * binutils-all/objdump.exp: Force section sizes to be interpreted in hex. Change objdump -h failure mode to always use the same string. Thu Jan 5 13:01:43 1995 Ian Lance Taylor * binutils-all/nm.exp: Just check for irix4*, rather than irix\[0-4\]*, to avoid DejaGnu bug. Thu Dec 15 19:35:31 1994 Ken Raeburn * binutils-all/objcopy.exp: Expect simple-objcopy test to fail for various other targets for which gas doesn't use bfd: sh-hms, m68k-hpux, m68k-sunos, m68k-coff, i386-linux, a29k-udi, a29k-coff, i960-vxworks5.1, i960-coff, h8300-hms, h8300-coff. Wed Dec 14 15:54:46 1994 Ken Raeburn * binutils-all/size.exp: Skip tests requiring bintest.o on hppa, since it (correctly) generates syntax errors on that platform. * binutils-all/objdump.exp: Ditto. * binutils-all/nm.exp: Ditto. * binutils-all/objcopy.exp: Ditto. Also, move setup_xfail for sh-coff to branch where objcopy execution produced no error messages. Expect failure for hp300 also. Thu Dec 8 14:36:15 1994 Ken Raeburn * binutils-all/objdump.exp (cpus_expected): New variable, taken from objdump -i test, added ns32k and powerpc, sorted. (objdump -i, -f tests): Use $cpus_expected. * binutils-all/objcopy.exp: For simple-copy test, expect failure for sh-coff. Tue Oct 25 16:00:14 1994 Ian Lance Taylor * binutils-all/objcopy.exp: Adjust --adjust-section-vma tests for new S-record section handling. Tue Oct 18 11:18:21 1994 Ian Lance Taylor * binutils-all/nm.exp: nm with no arguments and nm -P do not work as expected on ECOFF targets; add calls to setup_xfail. * binutils-all/objcopy.exp: New file. * config/default.exp: Initialize OBJCOPY and OBJCOPYFLAGS. Fri Oct 14 14:46:22 1994 Ian Lance Taylor Rewrite testsuite. * configure.in, Makefile.in: Remove. * binutils-all/configure.in, binutils-all/Makefile.in: Remove. * binutils-all/bintest.c: Remove. * binutils-all/bintest.s: New file. * binutils-all/nm.exp, binutils-all/objdump.exp: Rewrite. * binutils-all/size.exp: Rewrite. * config/default.exp: Load utils-lib.exp. Set AS and ASFLAGS. Don't go up one directory from $base_dir. Create tmpdir. (binutils_run, binutils-assemble): New procedures. * config/unix.exp: Remove. * config/mt-a29k-udi, config/mt-i386-aout: Remove. * config/mt-i960-nindy, config/mt-lynx, config/mt-m68k: Remove. * config/mt-mips-ecoff, config/mt-slite: Remove. * config/mt-sparc-aout, config/mt-vxworks: Remove. * lib/utils-lib.exp (binutil_version): Don't redirect standard input when getting version. Don't unset errorInfo. (default_binutils_run): New procedure. (default_binutils_assemble): New procedure. Thu Sep 29 12:45:39 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * VMS does not permit `.' in directory names: renamed binutils.all to binutils-all. * configure.in (configdirs): Change binutils.all to binutils-all. Fri Sep 23 16:01:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * configure.in: Use mt-m68k for m68k*-*-aout* and m68k*-*-coff*, not for m68k-*-*. Fri Sep 23 13:54:50 1994 Ken Raeburn * binutils.all/objdump.exp: Added ARM to list of CPU types. Thu Sep 22 11:04:50 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * binutils.all/objdump.exp: Update for new usage message. * binutils.all/size.exp: Use a double backslash in the string to get a single backslash to the regexp matcher. Accept $TEXT$, $DATA$ and $BSS$ as well as .text, .data and .bss, for HP/UX. Fri Sep 2 12:53:10 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * config/unix.exp: If nm.new does not exist, use [transform nm]. * config/default.exp: Likewise. Wed Aug 24 12:41:37 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * configure.in, binutils.all/configure.in: Change i386 to i[345]86. Tue Jul 19 15:23:53 1994 Bill Cox (bill@rtl.cygnus.com) * config/mt-mips-ecoff: Add -Tidp.ld option. Thu Jun 30 12:41:55 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * config/default.exp: Use nm.new, not nm, from newly built tree. Tue May 17 14:04:05 1994 Bill Cox (bill@rtl.cygnus.com) * config/default.exp, config/unix.exp: Replace error proc calls with perror. Tue May 10 11:20:54 1994 Stan Shebs (shebs@andros.cygnus.com) * configure.in (sparclite): Match on sparclite*-*-*. Wed Apr 13 18:25:19 1994 Ken Raeburn (raeburn@cujo.cygnus.com) * config/unix.exp: Use nm.new, not nm, from newly built tree. * binutils.all/objdump.exp: Add more wildcards to list of single-letter options in pattern for usage message. * binutils.all/nm.exp: Deleted debug-symbols test, since it only works for a.out/stabs systems. Fixed regexps to make underscores optional, since some C compilers don't prepend them. Deleted check for foo.o symbol, since again some systems don't generate it. Mon Apr 11 10:31:00 1994 Bill Cox (bill@rtl.cygnus.com) * Makefile.in (check): Set TCL_LIBRARY for runtest. Mon Feb 14 19:34:03 1994 Rob Savoye (rob@darkstar.cygnus.com) * Makefile.in: Use new config features of DejaGnu in site.exp file. "Make check" should now work for all crosses. Fri Jan 28 18:00:29 1994 Ken Raeburn (raeburn@cujo.cygnus.com) * binutils.all/objdump.exp: In usage message, accept "section-name" as well as "section_name". Mon Jan 17 16:57:02 1994 Ken Raeburn (raeburn@cujo.cygnus.com) * binutils.all/objdump.exp: Trim list of format names expected, and accept any known CPU type. Thu Dec 2 20:50:24 1993 Rob Savoye (rob@darkstar.cygnus.com) * Makefile.in: Remove some stuff from the site.exp file. * config/unix.exp: Add global before seeing if the variables for nm, objdump, and size exist. Wed Nov 3 11:12:32 1993 Rob Savoye (rob@darkstar.cygnus.com) * config/udi.exp,unix.exp: Transform tool name. * binutils.all/*.exp: Clear errorInfo after exec. Fri Jul 2 12:41:20 1993 Ian Lance Taylor (ian@cygnus.com) * binutils.all/*.exp: Use -- for long arguments rather than +. Fri Jun 4 10:52:29 1993 david d `zoo' zuhn (zoo@cirdan.cygnus.com) * configure.in: change srctrigger to Makefile.in Wed May 26 17:27:46 1993 Ian Lance Taylor (ian@cygnus.com) * Makefile.in (FLAGS_TO_PASS): Pass down CC and CFLAGS. Fri May 7 13:58:44 1993 Ian Lance Taylor (ian@cygnus.com) * binutils.all/objdump.exp: Update for new usage message. Mon Apr 19 14:08:52 1993 Rob Savoye (rob@darkstar.cygnus.com) * binutils.all/*.exp: Use the new util_test proc. * Makefile.in: Create a local site.exp file with config info. Thu Mar 25 05:38:47 1993 Ken Raeburn (raeburn@kr-pc.cygnus.com) * nm.all/configure.in (srcname): Delete extra quote. Mon Feb 22 07:54:03 1993 Mike Werner (mtw@poseidon.cygnus.com) * binutils/testsuite: made modifications to testcases, etc., to allow them to work properly given the reorganization of deja-gnu and the relocation of the testcases from deja-gnu to a "tool" subdirectory. Sun Feb 21 10:55:55 1993 Mike Werner (mtw@poseidon.cygnus.com) * binutils/testsuite: Initial creation of binutils/testsuite. Migrated dejagnu testcases and support files for testing nm to binutils/testsuite from deja-gnu. These files were moved "as is" with no modifications. This migration is part of a major overhaul of dejagnu. The modifications to these testcases, etc., which will allow them to work with the new version of dejagnu will be made in a future update.