# Makefile for GNU binary-file utilities
# Copyright (C) 1989-1991 Free Software Foundation, Inc.
# This file is part of GNU binutils.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#$Id$
srcdir = .
ddestdir = /usr/local
idestdir = $(ddestdir)
SHELL = /bin/sh
MAKEINFO=makeinfo
TEXI2ROFF=texi2roff
# Distribution version
VERSION=1.91
# Distribution name
DIST_NAME=binutils-beta-${VERSION}
version=`$(unsubdir)/../gcc$(subdir)/gcc -dumpversion`
prefix = $(ddestdir)
bindir = $(prefix)/bin
mandir = $(idestdir)/man
# Where to find texinfo.tex to format docn with TeX
TEXIDIR = $(srcdir)/../texinfo/fsf
MANPAGES= ar.1 nm.1 objdump.1 ranlib.1 size.1 strip.1
#INSTALL = install -c
#INSTALL_PROGRAM = $(INSTALL)
#INSTALL_FILE = $(INSTALL)
#CC=gcc -Wall
# these two are almost the same program
AR_PROG=ar
RANLIB_PROG=ranlib
# copy and strip should be the same program
COPY_PROG=copy
STRIP_PROG=strip
# These should all be the same program too.
SIZE_PROG=size
NM_PROG=nm
OBJDUMP_PROG=objdump
PROGS = $(SIZE_PROG) $(COPY_PROG) $(OBJDUMP_PROG) $(NM_PROG) $(AR_PROG) $(STRIP_PROG) $(RANLIB_PROG)
STAGESTUFF = $(PROGS) *.o
BASEDIR = $(srcdir)/..
LIBDIR = $(unsubdir)/../bfd$(subdir)
MINUS_G = -g
#### host and target dependant Makefile fragments come in here.
###
INCDIR = $(BASEDIR)/include
CFLAGS = $(MINUS_G) -I. -I$(srcdir) -I$(INCDIR) $(HDEFINES) $(TDEFINES)
# When adding .o files, to make VPATH work in Sun Make, you have to
# also add a foo.o: foo.c line at the bottom of the file.
DISASMS = m68k-pinsn.o i960-pinsn.o sparc-pinsn.o am29k-pinsn.o
#
## Random definitions
# Hopefully all these may be flushed once we get configuration down pat.
# alloca only needed for systems which don't have it and when cc != gcc.
# ALLOCA = alloca.o
# nm tries to malloc enough space for the string table. The old GNU malloc
# rounds this up to a power of two (e.g. 5M becomes 8M), and so it might
# fail unnecessarily. I've also seen some Unix malloc's fail, even when
# there is enough memory. So use the new GNU malloc.
# MALLOC = gmalloc.o
# Use the GNU getopt unless you have problems with it.
# The IRIS version could probably benefit from being assembled with
# libmalloc rather than the ordinary malloc.
LIBIBERTY = $(unsubdir)/../libiberty$(subdir)/libiberty.a
# Code shared by all the binutils.
BULIBS = bucomm.o version.o filemode.o
ADDL_LIBS = $(MALLOC) $(BULIBS) $(BFD) $(LIBIBERTY)
BFD = $(LIBDIR)/libbfd.a
#
## The rules
all: $(ADDL_LIBS) $(PROGS)
all-info: binutils.info
#$(BFD):$(LIBDIR)/../common/*.c
# (cd $(LIBDIR); make)
$(SIZE_PROG): $(ADDL_LIBS) size.o $(BFD)
$(CC) $(LDFLAGS) $(CFLAGS) -o $(SIZE_PROG) size.o $(ADDL_LIBS) $(LOADLIBES)
$(COPY_PROG): $(ADDL_LIBS) copy.o $(BFD)
$(CC) $(LDFLAGS) $(CFLAGS) -o $(COPY_PROG) copy.o $(ADDL_LIBS) $(LOADLIBES)
$(NM_PROG): $(ADDL_LIBS) nm.o $(BFD)
$(CC) $(LDFLAGS) $(CFLAGS) -o $(NM_PROG) nm.o $(ADDL_LIBS) $(LOADLIBES)
$(OBJDUMP_PROG): $(ADDL_LIBS) size.o objdump.o $(DISASMS) $(BFD)
$(CC) $(LDFLAGS) $(CFLAGS) -o $(OBJDUMP_PROG) objdump.o $(DISASMS) $(ADDL_LIBS) $(LOADLIBES)
$(AR_PROG): $(ADDL_LIBS) ar.o not-ranlib.o $(BFD)
$(CC) $(LDFLAGS) $(CFLAGS) -o $(AR_PROG) ar.o not-ranlib.o $(ADDL_LIBS) $(LOADLIBES)
$(RANLIB_PROG): $(ADDL_LIBS) ar.o is-ranlib.o $(BFD)
$(CC) $(LDFLAGS) $(CFLAGS) -o $(RANLIB_PROG) ar.o is-ranlib.o $(ADDL_LIBS) $(LOADLIBES)
# This rule creates a single binary that switches between ar and ranlib
# by looking at argv[0]. Use this kludge to save some disk space.
# However, you have to install things by hand.
# (That is after 'make install', replace the installed ranlib by a link to ar.)
# Alternatively, you can install ranlib.sh as ranlib.
ar_with_ranlib: $(ADDL_LIBS) ar.o maybe-ranlib.o $(BFD)
$(CC) $(LDFLAGS) $(CFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(LOADLIBES)
-rm -f $(RANLIB_PROG)
-ln $(AR_PROG) $(RANLIB_PROG)
$(STRIP_PROG): $(COPY_PROG)
-rm -f $(STRIP_PROG)
-ln $(COPY_PROG) $(STRIP_PROG)
stage1: force
- mkdir stage1
- mv -f $(STAGESTUFF) stage1
stage2: force
- mkdir stage2
- mv -f $(STAGESTUFF) stage2
stage3: force
- mkdir stage3
- mv -f $(STAGESTUFF) stage3
against=stage2
comparison: force
for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done
de-stage1: force
- (cd stage1 ; mv -f * ..)
- rmdir stage1
de-stage2: force
- (cd stage2 ; mv -f * ..)
- rmdir stage2
de-stage3: force
- (cd stage3 ; mv -f * ..)
- rmdir stage3
######################################################################
# DOCUMENTATION TARGETS
# TeX output
binutils.dvi: $(srcdir)/binutils.texi
TEXINPUTS=${TEXIDIR}:.:$$TEXINPUTS tex $(srcdir)/binutils.texi
texindex binutils.??
TEXINPUTS=${TEXIDIR}:.:$$TEXINPUTS tex $(srcdir)/binutils.texi
# info file for online browsing
binutils.info: $(srcdir)/binutils.texi
$(MAKEINFO) -o binutils.info $(srcdir)/binutils.texi
# different targets for -ms, -mm, -me
# Try to use a recent texi2roff. v2 was put on prep in jan91.
# If you want an index, see texi2roff doc for postprocessing
# and add -i to texi2roff invocations below.
# Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
# correspondint -e lines when later texi2roff's are current)
# + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
# + @c's deleted explicitly because texi2roff sees texinfo commands in them
# + @ (that's at-BLANK) not recognized by texi2roff, turned into blank
# + @alphaenumerate is ridiculously new, turned into @enumerate
# roff output (-ms)
binutils.ms: $(srcdir)/binutils.texi
sed -e '/\\input texinfo/d' \
-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
-e '/^@ifinfo/,/^@end ifinfo/d' \
-e '/^@c/d' \
-e 's/{.*,,/{/' \
-e 's/@ / /g' \
-e 's/^@alphaenumerate/@enumerate/g' \
-e 's/^@end alphaenumerate/@end enumerate/g' \
$(srcdir)/binutils.texi | \
texi2roff -ms | \
sed -e 's/---/\\(em/g' \
>binutils.ms
# roff output (-mm)
# '@noindent's removed due to texi2roff-2 mm bug; if yours is newer,
# try leaving them in
binutils.mm: $(srcdir)/binutils.texi
sed -e '/\\input texinfo/d' \
-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
-e '/^@ifinfo/,/^@end ifinfo/d' \
-e '/^@c/d' \
-e 's/{.*,,/{/' \
-e '/@noindent/d' \
-e 's/@ / /g' \
-e 's/^@alphaenumerate/@enumerate/g' \
-e 's/^@end alphaenumerate/@end enumerate/g' \
$(srcdir)/binutils.texi | \
texi2roff -mm | \
sed -e 's/---/\\(em/g' \
>binutils.mm
# roff output (-me)
binutils.me: $(srcdir)/binutils.texi
sed -e '/\\input texinfo/d' \
-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
-e '/^@ifinfo/,/^@end ifinfo/d' \
-e '/^@c/d' \
-e 's/{.*,,/{/' \
-e 's/@ / /g' \
-e 's/^@alphaenumerate/@enumerate/g' \
-e 's/^@end alphaenumerate/@end enumerate/g' \
$(srcdir)/binutils.texi | \
texi2roff -me | \
sed -e 's/---/\\(em/g' \
>binutils.me
######################################################################
clean:
-rm -f *.o *~ \#* core $(STAGESTUFF) TAGS binutils.?? binutils.???
etags tags: TAGS
TAGS: force
etags $(INCDIR)/*.h $(BFDSRC)/*.[hc] *.[hc]
realclean: clean
-rm -f $(STAGESTUFF) TAGS
install: all
for i in $(PROGS) ; do \
(cp $$i $(bindir)/$$i.new \
&& mv -f $(bindir)/$$i.new $(bindir)/$$i) \
|| exit 1 ; \
done
for i in $(MANPAGES) ; do \
(cp $(srcdir)/$$i $(mandir)/man1/$$i.new \
&& mv -f $(mandir)/man1/$$i.new $(mandir)/man1/$$i) \
|| exit 1 ; \
done
install-info: all-info
for i in *.info* ; do \
(cp $$i $(idestdir)/info/$$i.new \
&& mv -f $(idestdir)/info/$$i.new $(idestdir)/info/$$i) \
|| exit 1 ; \
done
dist: $(DIST_NAME).tar.Z
$(DIST_NAME).tar.Z:
cd ../..; rm -f $(DIST_NAME); ln -s devo $(DIST_NAME)
make binutils.mm -f Makefile.in
cd ../ld; make ld.mm -f Makefile.in
cd ../..; tar chf - $(DIST_NAME) | compress >$(DIST_NAME).tar.Z
rm -rf ../../$(DIST_NAME)
# These get around a bug in Sun Make in SunOS 4.1.1
alloca.o:alloca.c
am29k-pinsn.o: am29k-pinsn.c
ar.o: ar.c
bucomm.o: bucomm.c
copy.o: copy.c
cplus-dem.o:cplus-dem.c
filemode.o:filemode.c
getopt.o:getopt.c
getopt1.o:getopt1.c
gmalloc.o:gmalloc.c
i960-pinsn.o: i960-pinsn.c
is-ranlib.o:is-ranlib.c
m68k-pinsn.o: m68k-pinsn.c
maybe-ranlib.o:maybe-ranlib.c
nm.o: nm.c
not-ranlib.o:not-ranlib.c
objdump.o: objdump.c
size.o: size.c
sparc-pinsn.o: sparc-pinsn.c
strip.o:strip.c
version.o: version.c
#-----------------------------------------------------------------------------
# 'STANDARD' GNU/960 TARGETS BELOW THIS POINT
#
# 'VERSION' file must be present and contain a string of the form "x.y"
#-----------------------------------------------------------------------------
ver960.c: FORCE
rm -f ver960.c
echo "char ${TARG}_ver[]= \"${TARG} `cat VERSION`, `date`\";" > ver960.c
# Dummy target to force execution of dependent targets.
#
force:
# Target to uncomment host-specific lines in this makefile. Such lines must
# have the following string beginning in column 1: #__<hostname>__#
# Original Makefile is backed up as 'Makefile.old'.
#
# Invoke with: make make HOST=xxx
#
make:
-@if test $(HOST)x = x ; then \
echo 'Specify "make make HOST=???"'; \
exit 1; \
fi ; \
grep -s "^#The next line was generated by 'make make'" Makefile; \
if test $$? = 0 ; then \
echo "Makefile has already been processed with 'make make'";\
exit 1; \
fi ; \
mv -f Makefile Makefile.old; \
echo "#The next line was generated by 'make make'" >Makefile ; \
echo "HOST=$(HOST)" >>Makefile ; \
echo >>Makefile ; \
sed "s/^#__$(HOST)__#//" < Makefile.old >>Makefile
Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
$(SHELL) ./config.status
### Local Variables: ***
### mode:fundamental ***
### page-delimiter: "^# " ***
### End: ***
### end of file