## Process this file with automake to generate Makefile.in # # Copyright (C) 2012-2019 Free Software Foundation, Inc. # # This file is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; see the file COPYING3. If not see # <http://www.gnu.org/licenses/>. # AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd SUBDIRS = doc po tooldir = $(exec_prefix)/$(target_alias) ## These aren't set by automake, because they appear in ## bfd/acinclude.m4, which is included by binutils/acinclude.m4, and ## thus is not seen by automake. CC_FOR_BUILD = @CC_FOR_BUILD@ EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@ YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi` YFLAGS = -d LEX = `if [ -f ../flex/flex ]; then echo ../flex/flex; else echo @LEX@; fi` LEXLIB = @LEXLIB@ # Automake 1.10+ disables lex and yacc output file regeneration if # maintainer mode is disabled. Avoid this. am__skiplex = am__skipyacc = # This is where we get zlib from. zlibdir is -L../zlib and zlibinc is # -I../zlib, unless we were configured with --with-system-zlib, in which # case both are empty. ZLIB = @zlibdir@ -lz ZLIBINC = @zlibinc@ WARN_CFLAGS = @WARN_CFLAGS@ WARN_CFLAGS_FOR_BUILD = @WARN_CFLAGS_FOR_BUILD@ NO_WERROR = @NO_WERROR@ AM_CFLAGS = $(WARN_CFLAGS) $(ZLIBINC) AM_CFLAGS_FOR_BUILD = $(WARN_CFLAGS_FOR_BUILD) $(ZLIBINC) LIBICONV = @LIBICONV@ # these two are almost the same program AR_PROG=ar RANLIB_PROG=ranlib # objcopy and strip should be the same program OBJCOPY_PROG=objcopy STRIP_PROG=strip-new STRINGS_PROG=strings READELF_PROG=readelf ELFEDIT_PROG=elfedit # These should all be the same program too. SIZE_PROG=size NM_PROG=nm-new OBJDUMP_PROG=objdump # This is the demangler, as a standalone program. # Note: This one is used as the installed name too, unlike the above. DEMANGLER_PROG=cxxfilt ADDR2LINE_PROG=addr2line DLLTOOL_PROG=dlltool WINDRES_PROG=windres WINDMC_PROG=windmc DLLWRAP_PROG=dllwrap SRCONV_PROG=srconv$(EXEEXT) sysdump$(EXEEXT) coffdump$(EXEEXT) bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) $(RANLIB_PROG) $(OBJCOPY_PROG) @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ @BUILD_WINDMC@ $(ADDR2LINE_PROG) $(READELF_PROG) $(ELFEDIT_PROG) @BUILD_DLLWRAP@ bin_SCRIPTS = @BUILD_INSTALL_MISC@ EXTRA_SCRIPTS = embedspu ## Test programs. BFDTEST1_PROG = bfdtest1 BFDTEST2_PROG = bfdtest2 GENTESTDLLS_PROG = testsuite/gentestdlls TEST_PROGS = $(BFDTEST1_PROG) $(BFDTEST2_PROG) $(GENTESTDLLS_PROG) ## We need a special rule to install the programs which are built with ## -new, and to rename cxxfilt to c++filt. RENAMED_PROGS = $(NM_PROG) $(STRIP_PROG) $(DEMANGLER_PROG) noinst_PROGRAMS = $(RENAMED_PROGS) $(TEST_PROGS) @BUILD_MISC@ EXTRA_PROGRAMS = srconv sysdump coffdump $(DLLTOOL_PROG) $(WINDRES_PROG) $(WINDMC_PROG) $(DLLWRAP_PROG) # Stuff that goes in tooldir/ if appropriate. TOOL_PROGS = nm-new strip-new ar ranlib dlltool objdump objcopy readelf BASEDIR = $(srcdir)/.. BFDDIR = $(BASEDIR)/bfd INCDIR = $(BASEDIR)/include AM_CPPFLAGS = -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) \ @HDEFINES@ \ @INCINTL@ \ -DLOCALEDIR="\"$(datadir)/locale\"" \ -Dbin_dummy_emulation=$(EMULATION_VECTOR) HFILES = \ arsup.h binemul.h bucomm.h budbg.h \ coffgrok.h debug.h dlltool.h dwarf.h elfcomm.h \ objdump.h sysdep.h unwind-ia64.h windres.h winduni.h windint.h \ windmc.h GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h rcparse.h mcparse.h BUILT_SOURCES = $(GENERATED_HFILES) CFILES = \ addr2line.c ar.c arsup.c bin2c.c binemul.c bucomm.c \ coffdump.c coffgrok.c cxxfilt.c \ dwarf.c debug.c dlltool.c dllwrap.c \ elfcomm.c emul_aix.c emul_vanilla.c filemode.c \ is-ranlib.c is-strip.c maybe-ranlib.c maybe-strip.c \ nm.c not-ranlib.c not-strip.c \ objcopy.c objdump.c prdbg.c \ od-xcoff.c od-macho.c \ rclex.c rdcoff.c rddbg.c readelf.c rename.c \ resbin.c rescoff.c resrc.c resres.c \ size.c srconv.c stabs.c strings.c sysdump.c \ syslex_wrap.c unwind-ia64.c elfedit.c version.c \ windres.c winduni.c wrstabs.c \ windmc.c mclex.c GENERATED_CFILES = \ arparse.c arlex.c sysroff.c sysinfo.c syslex.c \ defparse.c deflex.c rcparse.c mcparse.c DEBUG_SRCS = rddbg.c debug.c stabs.c rdcoff.c WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c # Extra object files for objdump OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@ # Code shared by all the binutils. BULIBS = bucomm.c version.c filemode.c # Code shared by the ELF related programs. ELFLIBS = elfcomm.c BFDLIB = ../bfd/libbfd.la OPCODES = ../opcodes/libopcodes.la LIBCTF = ../libctf/libctf.a LIBIBERTY = ../libiberty/libiberty.a POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES) po/POTFILES.in: @MAINT@ Makefile for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \ && mv tmp $(srcdir)/po/POTFILES.in EXPECT = expect RUNTEST = runtest CC_FOR_TARGET = ` \ if [ -f $$r/../gcc/xgcc ] ; then \ if [ -f $$r/../newlib/Makefile ] ; then \ echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \ else \ echo $$r/../gcc/xgcc -B$$r/../gcc/; \ fi; \ else \ if [ "@host@" = "@target@" ] ; then \ echo $(CC); \ else \ echo gcc | sed '$(transform)'; \ fi; \ fi` check-DEJAGNU: site.exp srcdir=`cd $(srcdir) && pwd`; export srcdir; \ r=`pwd`; export r; \ LC_ALL=C; export LC_ALL; \ EXPECT=$(EXPECT); export EXPECT; \ runtest=$(RUNTEST); \ if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \ CC="$(CC)" CC_FOR_BUILD="$(CC_FOR_BUILD)" \ CC_FOR_TARGET="$(CC_FOR_TARGET)" CFLAGS_FOR_TARGET="$(CFLAGS)" \ $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \ $(RUNTESTFLAGS); \ else echo "WARNING: could not find \`runtest'" 1>&2; :;\ fi development.exp: $(BFDDIR)/development.sh $(EGREP) "[development|experimental]=" $(BFDDIR)/development.sh \ | $(AWK) -F= '{ print "set " $$1 " " $$2 }' > $@ installcheck-local: /bin/sh $(srcdir)/sanity.sh $(bindir) # There's no global DEPENDENCIES. So, we must explicitly list everything # which depends on libintl, since we don't know whether LIBINTL_DEP will be # non-empty until configure time. Ugh! size_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) objdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) $(OPCODES) $(LIBCTF) $(OBJDUMP_PRIVATE_OFILES) nm_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) ar_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) strings_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) strip_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) ranlib_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) cxxfilt_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) objcopy_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) srconv_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) sysdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) coffdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) dlltool_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) windres_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) windmc_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) addr2line_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) readelf_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(LIBCTF) elfedit_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) dllwrap_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) bfdtest1_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) bfdtest2_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) LDADD = $(BFDLIB) $(LIBIBERTY) $(LIBINTL) size_SOURCES = size.c $(BULIBS) objcopy_SOURCES = objcopy.c not-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS) strings_SOURCES = strings.c $(BULIBS) readelf_SOURCES = readelf.c version.c unwind-ia64.c dwarf.c $(ELFLIBS) readelf_LDADD = $(LIBINTL) $(LIBCTF) $(LIBIBERTY) $(ZLIB) elfedit_SOURCES = elfedit.c version.c $(ELFLIBS) elfedit_LDADD = $(LIBINTL) $(LIBIBERTY) strip_new_SOURCES = objcopy.c is-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS) nm_new_SOURCES = nm.c $(BULIBS) objdump_SOURCES = objdump.c dwarf.c prdbg.c $(DEBUG_SRCS) $(BULIBS) $(ELFLIBS) EXTRA_objdump_SOURCES = od-xcoff.c objdump_LDADD = $(OBJDUMP_PRIVATE_OFILES) $(OPCODES) $(LIBCTF) $(BFDLIB) $(LIBIBERTY) $(LIBINTL) objdump.@OBJEXT@:objdump.c if am__fastdepCC $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po else if AMDEP source='objdump.c' object='$@' libtool=no @AMDEPBACKSLASH@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ endif $(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c endif cxxfilt_SOURCES = cxxfilt.c $(BULIBS) ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c rename.c binemul.c \ emul_$(EMULATION).c $(BULIBS) EXTRA_ar_SOURCES = $(CFILES) ar_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c rename.c \ binemul.c emul_$(EMULATION).c $(BULIBS) ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) addr2line_SOURCES = addr2line.c $(BULIBS) # The following is commented out for the conversion to automake. # This rule creates a single binary that switches between ar and ranlib # by looking at argv[0]. Use this kludge to save some disk space. # However, you have to install things by hand. # (That is after 'make install', replace the installed ranlib by a link to ar.) # Alternatively, you can install ranlib.sh as ranlib. # ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o # $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS) # -rm -f $(RANLIB_PROG) # -ln $(AR_PROG) $(RANLIB_PROG) # # objcopy and strip in one binary that uses argv[0] to decide its action. # #objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o # $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS) # -rm -f $(STRIP_PROG) # -ln $(OBJCOPY_PROG) $(STRIP_PROG) sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info ./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c ./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c ./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h sysinfo$(EXEEXT_FOR_BUILD): sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@ $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@ syslex_wrap.@OBJEXT@: syslex_wrap.c syslex.c sysinfo.h config.h $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c sysinfo.@OBJEXT@: sysinfo.c if [ -r sysinfo.c ]; then \ $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \ else \ $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \ fi bin2c$(EXEEXT_FOR_BUILD): bin2c.c $(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c embedspu: embedspu.sh Makefile awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@ chmod a+x $@ # We need these for parallel make. sysinfo.h: sysinfo.c # Disable -Werror, if it has been enabled, since old versions of bison/ # yacc will produce working code which contain compile time warnings. arparse.@OBJEXT@: arparse.c if am__fastdepCC $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR) mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po else if AMDEP source='arparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ endif $(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR) endif arlex.@OBJEXT@: arlex.c if am__fastdepCC $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR) mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po else if AMDEP source='arlex.c' object='$@' libtool=no @AMDEPBACKSLASH@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ endif $(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR) endif sysroff.@OBJEXT@: sysroff.c if am__fastdepCC $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR) mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po else if AMDEP source='sysroff.c' object='$@' libtool=no @AMDEPBACKSLASH@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ endif $(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR) endif defparse.@OBJEXT@: defparse.c if am__fastdepCC $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR) mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po else if AMDEP source='defparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ endif $(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR) endif deflex.@OBJEXT@: deflex.c if am__fastdepCC $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR) mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po else if AMDEP source='deflex.c' object='$@' libtool=no @AMDEPBACKSLASH@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ endif $(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR) endif rcparse.@OBJEXT@: rcparse.c if am__fastdepCC $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR) mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po else if AMDEP source='rcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ endif $(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR) endif mcparse.@OBJEXT@: mcparse.c if am__fastdepCC $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR) mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po else if AMDEP source='mcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ endif $(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR) endif rclex.@OBJEXT@: rclex.c if am__fastdepCC $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR) mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po else if AMDEP source='rclex.c' object='$@' libtool=no @AMDEPBACKSLASH@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ endif $(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR) endif mclex.@OBJEXT@: mclex.c if am__fastdepCC $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR) mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po else if AMDEP source='mclex.c' object='$@' libtool=no @AMDEPBACKSLASH@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ endif $(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR) endif srconv_SOURCES = srconv.c coffgrok.c $(BULIBS) srconv.@OBJEXT@: sysroff.c dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS) dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) dlltool.@OBJEXT@: if am__fastdepCC $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/dlltool.c mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po else if AMDEP source='dlltool.c' object='$@' libtool=no @AMDEPBACKSLASH@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ endif $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c endif rescoff.@OBJEXT@: if am__fastdepCC $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/rescoff.c mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po else if AMDEP source='rescoff.c' object='$@' libtool=no @AMDEPBACKSLASH@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ endif $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c endif coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS) sysdump_SOURCES = sysdump.c $(BULIBS) sysdump.@OBJEXT@: sysroff.c windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.c \ winduni.c resres.c $(BULIBS) windres_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV) windmc_SOURCES = windmc.c mcparse.y mclex.c \ winduni.c $(BULIBS) windmc_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV) dllwrap_SOURCES = dllwrap.c version.c dllwrap_LDADD = $(LIBIBERTY) $(LIBINTL) EXTRA_DIST = arparse.c arparse.h arlex.c sysinfo.c sysinfo.h \ syslex.c deflex.c defparse.h defparse.c rcparse.h rcparse.c \ mcparse.h mcparse.c embedspu.sh diststuff: $(EXTRA_DIST) info all: info # development.sh is used to determine -Werror default. CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/development.sh EXTRA_DEJAGNU_SITE_CONFIG = development.exp DISTCLEANFILES = sysroff.c sysroff.h site.exp development.exp \ site.bak embedspu MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) bin2c$(EXEEXT_FOR_BUILD) \ binutils.log binutils.sum abcdefgh* mostlyclean-local: -rm -rf tmpdir .PHONY: install-exec-local install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS) @list='$(RENAMED_PROGS)'; for p in $$list; do \ if test -f $$p$(EXEEXT); then \ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(DESTDIR)$(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ else :; fi; \ done $(mkinstalldirs) $(DESTDIR)$(tooldir)/bin for i in $(TOOL_PROGS); do \ if [ -f $$i$(EXEEXT) ]; then \ j=`echo $$i | sed -e 's/-new//'`; \ k=`echo $$j | sed '$(transform)'`; \ if [ "$(bindir)/$$k" != "$(tooldir)/bin/$$j" ]; then \ rm -f $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \ ln $(DESTDIR)$(bindir)/$$k$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT) >/dev/null 2>/dev/null \ || $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$i$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \ fi; \ else true; \ fi; \ done