/* bfd back-end for HP PA-RISC SOM objects. Copyright (C) 1990, 1991, 1992, 1993 Free Software Foundation, Inc. Contributed by the Center for Software Science at the University of Utah (pa-gdb-bugs@cs.utah.edu). This file is part of BFD, the Binary File Descriptor library. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include "bfd.h" #include "sysdep.h" #if defined (HOST_HPPAHPUX) || defined (HOST_HPPABSD) || defined (HOST_HPPAOSF) #include "libbfd.h" #include "som.h" #include #include #include #include #include #include #include /* After a.out.h */ #include #include /* Magic not defined in standard HP-UX header files until 8.0 */ #ifndef CPU_PA_RISC1_0 #define CPU_PA_RISC1_0 0x20B #endif /* CPU_PA_RISC1_0 */ #ifndef CPU_PA_RISC1_1 #define CPU_PA_RISC1_1 0x210 #endif /* CPU_PA_RISC1_1 */ #ifndef _PA_RISC1_0_ID #define _PA_RISC1_0_ID CPU_PA_RISC1_0 #endif /* _PA_RISC1_0_ID */ #ifndef _PA_RISC1_1_ID #define _PA_RISC1_1_ID CPU_PA_RISC1_1 #endif /* _PA_RISC1_1_ID */ #ifndef _PA_RISC_MAXID #define _PA_RISC_MAXID 0x2FF #endif /* _PA_RISC_MAXID */ #ifndef _PA_RISC_ID #define _PA_RISC_ID(__m_num) \ (((__m_num) == _PA_RISC1_0_ID) || \ ((__m_num) >= _PA_RISC1_1_ID && (__m_num) <= _PA_RISC_MAXID)) #endif /* _PA_RISC_ID */ /* Size (in chars) of the temporary buffers used during fixup and string table writes. */ #define SOM_TMP_BUFSIZE 8192 /* Size of the hash table in archives. */ #define SOM_LST_HASH_SIZE 31 /* Max number of SOMs to be found in an archive. */ #define SOM_LST_MODULE_LIMIT 1024 /* Generic alignment macro. */ #define SOM_ALIGN(val, alignment) \ (((val) + (alignment) - 1) & ~((alignment) - 1)) /* SOM allows any one of the four previous relocations to be reused with a "R_PREV_FIXUP" relocation entry. Since R_PREV_FIXUP relocations are always a single byte, using a R_PREV_FIXUP instead of some multi-byte relocation makes object files smaller. Note one side effect of using a R_PREV_FIXUP is the relocation that is being repeated moves to the front of the queue. */ struct reloc_queue { unsigned char *reloc; unsigned int size; } reloc_queue[4]; /* This fully describes the symbol types which may be attached to an EXPORT or IMPORT directive. Only SOM uses this formation (ELF has no need for it). */ typedef enum { SYMBOL_TYPE_UNKNOWN, SYMBOL_TYPE_ABSOLUTE, SYMBOL_TYPE_CODE, SYMBOL_TYPE_DATA, SYMBOL_TYPE_ENTRY, SYMBOL_TYPE_MILLICODE, SYMBOL_TYPE_PLABEL, SYMBOL_TYPE_PRI_PROG, SYMBOL_TYPE_SEC_PROG, } pa_symbol_type; struct section_to_type { char *section; char type; }; /* Assorted symbol information that needs to be derived from the BFD symbol and/or the BFD backend private symbol data. */ struct som_misc_symbol_info { unsigned int symbol_type; unsigned int symbol_scope; unsigned int arg_reloc; unsigned int symbol_info; unsigned int symbol_value; }; /* Forward declarations */ static boolean som_mkobject PARAMS ((bfd *)); static bfd_target * som_object_setup PARAMS ((bfd *, struct header *, struct som_exec_auxhdr *)); static boolean setup_sections PARAMS ((bfd *, struct header *)); static bfd_target * som_object_p PARAMS ((bfd *)); static boolean som_write_object_contents PARAMS ((bfd *)); static boolean som_slurp_string_table PARAMS ((bfd *)); static unsigned int som_slurp_symbol_table PARAMS ((bfd *)); static unsigned int som_get_symtab_upper_bound PARAMS ((bfd *)); static unsigned int som_canonicalize_reloc PARAMS ((bfd *, sec_ptr, arelent **, asymbol **)); static unsigned int som_get_reloc_upper_bound PARAMS ((bfd *, sec_ptr)); static unsigned int som_set_reloc_info PARAMS ((unsigned char *, unsigned int, arelent *, asection *, asymbol **, boolean)); static boolean som_slurp_reloc_table PARAMS ((bfd *, asection *, asymbol **, boolean)); static unsigned int som_get_symtab PARAMS ((bfd *, asymbol **)); static asymbol * som_make_empty_symbol PARAMS ((bfd *)); static void som_print_symbol PARAMS ((bfd *, PTR, asymbol *, bfd_print_symbol_type)); static boolean som_new_section_hook PARAMS ((bfd *, asection *)); static boolean som_bfd_copy_private_section_data PARAMS ((bfd *, asection *, bfd *, asection *)); static boolean som_bfd_copy_private_bfd_data PARAMS ((bfd *, bfd *)); static boolean som_bfd_is_local_label PARAMS ((bfd *, asymbol *)); static boolean som_set_section_contents PARAMS ((bfd *, sec_ptr, PTR, file_ptr, bfd_size_type)); static boolean som_get_section_contents PARAMS ((bfd *, sec_ptr, PTR, file_ptr, bfd_size_type)); static boolean som_set_arch_mach PARAMS ((bfd *, enum bfd_architecture, unsigned long)); static boolean som_find_nearest_line PARAMS ((bfd *, asection *, asymbol **, bfd_vma, CONST char **, CONST char **, unsigned int *)); static void som_get_symbol_info PARAMS ((bfd *, asymbol *, symbol_info *)); static asection * bfd_section_from_som_symbol PARAMS ((bfd *, struct symbol_dictionary_record *)); static int log2 PARAMS ((unsigned int)); static bfd_reloc_status_type hppa_som_reloc PARAMS ((bfd *, arelent *, asymbol *, PTR, asection *, bfd *, char **)); static void som_initialize_reloc_queue PARAMS ((struct reloc_queue *)); static void som_reloc_queue_insert PARAMS ((unsigned char *, unsigned int, struct reloc_queue *)); static void som_reloc_queue_fix PARAMS ((struct reloc_queue *, unsigned int)); static int som_reloc_queue_find PARAMS ((unsigned char *, unsigned int, struct reloc_queue *)); static unsigned char * try_prev_fixup PARAMS ((bfd *, int *, unsigned char *, unsigned int, struct reloc_queue *)); static unsigned char * som_reloc_skip PARAMS ((bfd *, unsigned int, unsigned char *, unsigned int *, struct reloc_queue *)); static unsigned char * som_reloc_addend PARAMS ((bfd *, int, unsigned char *, unsigned int *, struct reloc_queue *)); static unsigned char * som_reloc_call PARAMS ((bfd *, unsigned char *, unsigned int *, arelent *, int, struct reloc_queue *)); static unsigned long som_count_spaces PARAMS ((bfd *)); static unsigned long som_count_subspaces PARAMS ((bfd *)); static int compare_syms PARAMS ((asymbol **, asymbol **)); static unsigned long som_compute_checksum PARAMS ((bfd *)); static boolean som_prep_headers PARAMS ((bfd *)); static int som_sizeof_headers PARAMS ((bfd *, boolean)); static boolean som_write_headers PARAMS ((bfd *)); static boolean som_build_and_write_symbol_table PARAMS ((bfd *)); static void som_prep_for_fixups PARAMS ((bfd *, asymbol **, unsigned long)); static boolean som_write_fixups PARAMS ((bfd *, unsigned long, unsigned int *)); static boolean som_write_space_strings PARAMS ((bfd *, unsigned long, unsigned int *)); static boolean som_write_symbol_strings PARAMS ((bfd *, unsigned long, asymbol **, unsigned int, unsigned *)); static boolean som_begin_writing PARAMS ((bfd *)); static const reloc_howto_type * som_bfd_reloc_type_lookup PARAMS ((bfd_arch_info_type *, bfd_reloc_code_real_type)); static char som_section_type PARAMS ((const char *)); static int som_decode_symclass PARAMS ((asymbol *)); static boolean som_bfd_count_ar_symbols PARAMS ((bfd *, struct lst_header *, symindex *)); static boolean som_bfd_fill_in_ar_symbols PARAMS ((bfd *, struct lst_header *, carsym **syms)); static boolean som_slurp_armap PARAMS ((bfd *)); static boolean som_write_armap PARAMS ((bfd *)); static void som_bfd_derive_misc_symbol_info PARAMS ((bfd *, asymbol *, struct som_misc_symbol_info *)); static boolean som_bfd_prep_for_ar_write PARAMS ((bfd *, unsigned int *, unsigned int *)); static unsigned int som_bfd_ar_symbol_hash PARAMS ((asymbol *)); static boolean som_bfd_ar_write_symbol_stuff PARAMS ((bfd *, unsigned int, unsigned int, struct lst_header)); static CONST char *normalize PARAMS ((CONST char *file)); static boolean som_is_space PARAMS ((asection *)); static boolean som_is_subspace PARAMS ((asection *)); static boolean som_is_container PARAMS ((asection *, asection *)); /* Map SOM section names to POSIX/BSD single-character symbol types. This table includes all the standard subspaces as defined in the current "PRO ABI for PA-RISC Systems", $UNWIND$ which for some reason was left out, and sections specific to embedded stabs. */ static const struct section_to_type stt[] = { {"$TEXT$", 't'}, {"$SHLIB_INFO$", 't'}, {"$MILLICODE$", 't'}, {"$LIT$", 't'}, {"$CODE$", 't'}, {"$UNWIND_START$", 't'}, {"$UNWIND$", 't'}, {"$PRIVATE$", 'd'}, {"$PLT$", 'd'}, {"$SHLIB_DATA$", 'd'}, {"$DATA$", 'd'}, {"$SHORTDATA$", 'g'}, {"$DLT$", 'd'}, {"$GLOBAL$", 'g'}, {"$SHORTBSS$", 's'}, {"$BSS$", 'b'}, {"$GDB_STRINGS$", 'N'}, {"$GDB_SYMBOLS$", 'N'}, {0, 0} }; /* About the relocation formatting table... There are 256 entries in the table, one for each possible relocation opcode available in SOM. We index the table by the relocation opcode. The names and operations are those defined by a.out_800 (4). Right now this table is only used to count and perform minimal processing on relocation streams so that they can be internalized into BFD and symbolically printed by utilities. To make actual use of them would be much more difficult, BFD's concept of relocations is far too simple to handle SOM relocations. The basic assumption that a relocation can be completely processed independent of other relocations before an object file is written is invalid for SOM. The SOM relocations are meant to be processed as a stream, they specify copying of data from the input section to the output section while possibly modifying the data in some manner. They also can specify that a variable number of zeros or uninitialized data be inserted on in the output segment at the current offset. Some relocations specify that some previous relocation be re-applied at the current location in the input/output sections. And finally a number of relocations have effects on other sections (R_ENTRY, R_EXIT, R_UNWIND_AUX and a variety of others). There isn't even enough room in the BFD relocation data structure to store enough information to perform all the relocations. Each entry in the table has three fields. The first entry is an index into this "class" of relocations. This index can then be used as a variable within the relocation itself. The second field is a format string which actually controls processing of the relocation. It uses a simple postfix machine to do calculations based on variables/constants found in the string and the relocation stream. The third field specifys whether or not this relocation may use a constant (V) from the previous R_DATA_OVERRIDE rather than a constant stored in the instruction. Variables: L = input space byte count D = index into class of relocations M = output space byte count N = statement number (unused?) O = stack operation R = parameter relocation bits S = symbol index U = 64 bits of stack unwind and frame size info (we only keep 32 bits) V = a literal constant (usually used in the next relocation) P = a previous relocation Lower case letters (starting with 'b') refer to following bytes in the relocation stream. 'b' is the next 1 byte, c is the next 2 bytes, d is the next 3 bytes, etc... This is the variable part of the relocation entries that makes our life a living hell. numerical constants are also used in the format string. Note the constants are represented in decimal. '+', "*" and "=" represents the obvious postfix operators. '<' represents a left shift. Stack Operations: Parameter Relocation Bits: Unwind Entries: Previous Relocations: The index field represents which in the queue of 4 previous fixups should be re-applied. Literal Constants: These are generally used to represent addend parts of relocations when these constants are not stored in the fields of the instructions themselves. For example the instruction addil foo-$global$-0x1234 would use an override for "0x1234" rather than storing it into the addil itself. */ struct fixup_format { int D; char *format; }; static const struct fixup_format som_fixup_formats[256] = { /* R_NO_RELOCATION */ 0, "LD1+4*=", /* 0x00 */ 1, "LD1+4*=", /* 0x01 */ 2, "LD1+4*=", /* 0x02 */ 3, "LD1+4*=", /* 0x03 */ 4, "LD1+4*=", /* 0x04 */ 5, "LD1+4*=", /* 0x05 */ 6, "LD1+4*=", /* 0x06 */ 7, "LD1+4*=", /* 0x07 */ 8, "LD1+4*=", /* 0x08 */ 9, "LD1+4*=", /* 0x09 */ 10, "LD1+4*=", /* 0x0a */ 11, "LD1+4*=", /* 0x0b */ 12, "LD1+4*=", /* 0x0c */ 13, "LD1+4*=", /* 0x0d */ 14, "LD1+4*=", /* 0x0e */ 15, "LD1+4*=", /* 0x0f */ 16, "LD1+4*=", /* 0x10 */ 17, "LD1+4*=", /* 0x11 */ 18, "LD1+4*=", /* 0x12 */ 19, "LD1+4*=", /* 0x13 */ 20, "LD1+4*=", /* 0x14 */ 21, "LD1+4*=", /* 0x15 */ 22, "LD1+4*=", /* 0x16 */ 23, "LD1+4*=", /* 0x17 */ 0, "LD8= 0x1000000) { skip -= 0x1000000; bfd_put_8 (abfd, R_NO_RELOCATION + 31, p); bfd_put_8 (abfd, 0xff, p + 1); bfd_put_16 (abfd, 0xffff, p + 2); p = try_prev_fixup (abfd, subspace_reloc_sizep, p, 4, queue); while (skip >= 0x1000000) { skip -= 0x1000000; bfd_put_8 (abfd, R_PREV_FIXUP, p); p++; *subspace_reloc_sizep += 1; /* No need to adjust queue here since we are repeating the most recent fixup. */ } } /* The difference must be less than 0x1000000. Use one more R_NO_RELOCATION entry to get to the right difference. */ if ((skip & 3) == 0 && skip <= 0xc0000 && skip > 0) { /* Difference can be handled in a simple single-byte R_NO_RELOCATION entry. */ if (skip <= 0x60) { bfd_put_8 (abfd, R_NO_RELOCATION + (skip >> 2) - 1, p); *subspace_reloc_sizep += 1; p++; } /* Handle it with a two byte R_NO_RELOCATION entry. */ else if (skip <= 0x1000) { bfd_put_8 (abfd, R_NO_RELOCATION + 24 + (((skip >> 2) - 1) >> 8), p); bfd_put_8 (abfd, (skip >> 2) - 1, p + 1); p = try_prev_fixup (abfd, subspace_reloc_sizep, p, 2, queue); } /* Handle it with a three byte R_NO_RELOCATION entry. */ else { bfd_put_8 (abfd, R_NO_RELOCATION + 28 + (((skip >> 2) - 1) >> 16), p); bfd_put_16 (abfd, (skip >> 2) - 1, p + 1); p = try_prev_fixup (abfd, subspace_reloc_sizep, p, 3, queue); } } /* Ugh. Punt and use a 4 byte entry. */ else if (skip > 0) { bfd_put_8 (abfd, R_NO_RELOCATION + 31, p); bfd_put_8 (abfd, skip >> 16, p + 1); bfd_put_16 (abfd, skip, p + 2); p = try_prev_fixup (abfd, subspace_reloc_sizep, p, 4, queue); } return p; } /* Emit the proper R_DATA_OVERRIDE fixups to handle a nonzero addend from a BFD relocation. Update the size of the subspace relocation stream via SUBSPACE_RELOC_SIZE_P; also return the current pointer into the relocation stream. */ static unsigned char * som_reloc_addend (abfd, addend, p, subspace_reloc_sizep, queue) bfd *abfd; int addend; unsigned char *p; unsigned int *subspace_reloc_sizep; struct reloc_queue *queue; { if ((unsigned)(addend) + 0x80 < 0x100) { bfd_put_8 (abfd, R_DATA_OVERRIDE + 1, p); bfd_put_8 (abfd, addend, p + 1); p = try_prev_fixup (abfd, subspace_reloc_sizep, p, 2, queue); } else if ((unsigned) (addend) + 0x8000 < 0x10000) { bfd_put_8 (abfd, R_DATA_OVERRIDE + 2, p); bfd_put_16 (abfd, addend, p + 1); p = try_prev_fixup (abfd, subspace_reloc_sizep, p, 3, queue); } else if ((unsigned) (addend) + 0x800000 < 0x1000000) { bfd_put_8 (abfd, R_DATA_OVERRIDE + 3, p); bfd_put_8 (abfd, addend >> 16, p + 1); bfd_put_16 (abfd, addend, p + 2); p = try_prev_fixup (abfd, subspace_reloc_sizep, p, 4, queue); } else { bfd_put_8 (abfd, R_DATA_OVERRIDE + 4, p); bfd_put_32 (abfd, addend, p + 1); p = try_prev_fixup (abfd, subspace_reloc_sizep, p, 5, queue); } return p; } /* Handle a single function call relocation. */ static unsigned char * som_reloc_call (abfd, p, subspace_reloc_sizep, bfd_reloc, sym_num, queue) bfd *abfd; unsigned char *p; unsigned int *subspace_reloc_sizep; arelent *bfd_reloc; int sym_num; struct reloc_queue *queue; { int arg_bits = HPPA_R_ARG_RELOC (bfd_reloc->addend); int rtn_bits = arg_bits & 0x3; int type, done = 0; /* You'll never believe all this is necessary to handle relocations for function calls. Having to compute and pack the argument relocation bits is the real nightmare. If you're interested in how this works, just forget it. You really do not want to know about this braindamage. */ /* First see if this can be done with a "simple" relocation. Simple relocations have a symbol number < 0x100 and have simple encodings of argument relocations. */ if (sym_num < 0x100) { switch (arg_bits) { case 0: case 1: type = 0; break; case 1 << 8: case 1 << 8 | 1: type = 1; break; case 1 << 8 | 1 << 6: case 1 << 8 | 1 << 6 | 1: type = 2; break; case 1 << 8 | 1 << 6 | 1 << 4: case 1 << 8 | 1 << 6 | 1 << 4 | 1: type = 3; break; case 1 << 8 | 1 << 6 | 1 << 4 | 1 << 2: case 1 << 8 | 1 << 6 | 1 << 4 | 1 << 2 | 1: type = 4; break; default: /* Not one of the easy encodings. This will have to be handled by the more complex code below. */ type = -1; break; } if (type != -1) { /* Account for the return value too. */ if (rtn_bits) type += 5; /* Emit a 2 byte relocation. Then see if it can be handled with a relocation which is already in the relocation queue. */ bfd_put_8 (abfd, bfd_reloc->howto->type + type, p); bfd_put_8 (abfd, sym_num, p + 1); p = try_prev_fixup (abfd, subspace_reloc_sizep, p, 2, queue); done = 1; } } /* If this could not be handled with a simple relocation, then do a hard one. Hard relocations occur if the symbol number was too high or if the encoding of argument relocation bits is too complex. */ if (! done) { /* Don't ask about these magic sequences. I took them straight from gas-1.36 which took them from the a.out man page. */ type = rtn_bits; if ((arg_bits >> 6 & 0xf) == 0xe) type += 9 * 40; else type += (3 * (arg_bits >> 8 & 3) + (arg_bits >> 6 & 3)) * 40; if ((arg_bits >> 2 & 0xf) == 0xe) type += 9 * 4; else type += (3 * (arg_bits >> 4 & 3) + (arg_bits >> 2 & 3)) * 4; /* Output the first two bytes of the relocation. These describe the length of the relocation and encoding style. */ bfd_put_8 (abfd, bfd_reloc->howto->type + 10 + 2 * (sym_num >= 0x100) + (type >= 0x100), p); bfd_put_8 (abfd, type, p + 1); /* Now output the symbol index and see if this bizarre relocation just happened to be in the relocation queue. */ if (sym_num < 0x100) { bfd_put_8 (abfd, sym_num, p + 2); p = try_prev_fixup (abfd, subspace_reloc_sizep, p, 3, queue); } else { bfd_put_8 (abfd, sym_num >> 16, p + 2); bfd_put_16 (abfd, sym_num, p + 3); p = try_prev_fixup (abfd, subspace_reloc_sizep, p, 5, queue); } } return p; } /* Return the logarithm of X, base 2, considering X unsigned. Abort -1 if X is not a power or two or is zero. */ static int log2 (x) unsigned int x; { int log = 0; /* Test for 0 or a power of 2. */ if (x == 0 || x != (x & -x)) return -1; while ((x >>= 1) != 0) log++; return log; } static bfd_reloc_status_type hppa_som_reloc (abfd, reloc_entry, symbol_in, data, input_section, output_bfd, error_message) bfd *abfd; arelent *reloc_entry; asymbol *symbol_in; PTR data; asection *input_section; bfd *output_bfd; char **error_message; { if (output_bfd) { reloc_entry->address += input_section->output_offset; return bfd_reloc_ok; } return bfd_reloc_ok; } /* Given a generic HPPA relocation type, the instruction format, and a field selector, return one or more appropriate SOM relocations. */ int ** hppa_som_gen_reloc_type (abfd, base_type, format, field) bfd *abfd; int base_type; int format; enum hppa_reloc_field_selector_type_alt field; { int *final_type, **final_types; final_types = (int **) bfd_alloc_by_size_t (abfd, sizeof (int *) * 3); final_type = (int *) bfd_alloc_by_size_t (abfd, sizeof (int)); if (!final_types || !final_type) { bfd_set_error (bfd_error_no_memory); return NULL; } /* The field selector may require additional relocations to be generated. It's impossible to know at this moment if additional relocations will be needed, so we make them. The code to actually write the relocation/fixup stream is responsible for removing any redundant relocations. */ switch (field) { case e_fsel: case e_psel: case e_lpsel: case e_rpsel: final_types[0] = final_type; final_types[1] = NULL; final_types[2] = NULL; *final_type = base_type; break; case e_tsel: case e_ltsel: case e_rtsel: final_types[0] = (int *) bfd_alloc_by_size_t (abfd, sizeof (int)); if (!final_types[0]) { bfd_set_error (bfd_error_no_memory); return NULL; } if (field == e_tsel) *final_types[0] = R_FSEL; else if (field == e_ltsel) *final_types[0] = R_LSEL; else *final_types[0] = R_RSEL; final_types[1] = final_type; final_types[2] = NULL; *final_type = base_type; break; case e_lssel: case e_rssel: final_types[0] = (int *) bfd_alloc_by_size_t (abfd, sizeof (int)); if (!final_types[0]) { bfd_set_error (bfd_error_no_memory); return NULL; } *final_types[0] = R_S_MODE; final_types[1] = final_type; final_types[2] = NULL; *final_type = base_type; break; case e_lsel: case e_rsel: final_types[0] = (int *) bfd_alloc_by_size_t (abfd, sizeof (int)); if (!final_types[0]) { bfd_set_error (bfd_error_no_memory); return NULL; } *final_types[0] = R_N_MODE; final_types[1] = final_type; final_types[2] = NULL; *final_type = base_type; break; case e_ldsel: case e_rdsel: final_types[0] = (int *) bfd_alloc_by_size_t (abfd, sizeof (int)); if (!final_types[0]) { bfd_set_error (bfd_error_no_memory); return NULL; } *final_types[0] = R_D_MODE; final_types[1] = final_type; final_types[2] = NULL; *final_type = base_type; break; case e_lrsel: case e_rrsel: final_types[0] = (int *) bfd_alloc_by_size_t (abfd, sizeof (int)); if (!final_types[0]) { bfd_set_error (bfd_error_no_memory); return NULL; } *final_types[0] = R_R_MODE; final_types[1] = final_type; final_types[2] = NULL; *final_type = base_type; break; } switch (base_type) { case R_HPPA: /* PLABELs get their own relocation type. */ if (field == e_psel || field == e_lpsel || field == e_rpsel) { /* A PLABEL relocation that has a size of 32 bits must be a R_DATA_PLABEL. All others are R_CODE_PLABELs. */ if (format == 32) *final_type = R_DATA_PLABEL; else *final_type = R_CODE_PLABEL; } /* PIC stuff. */ else if (field == e_tsel || field == e_ltsel || field == e_rtsel) *final_type = R_DLT_REL; /* A relocation in the data space is always a full 32bits. */ else if (format == 32) *final_type = R_DATA_ONE_SYMBOL; break; case R_HPPA_GOTOFF: /* More PLABEL special cases. */ if (field == e_psel || field == e_lpsel || field == e_rpsel) *final_type = R_DATA_PLABEL; break; case R_HPPA_NONE: case R_HPPA_ABS_CALL: case R_HPPA_PCREL_CALL: case R_HPPA_COMPLEX: case R_HPPA_COMPLEX_PCREL_CALL: case R_HPPA_COMPLEX_ABS_CALL: /* Right now we can default all these. */ break; } return final_types; } /* Return the address of the correct entry in the PA SOM relocation howto table. */ static const reloc_howto_type * som_bfd_reloc_type_lookup (arch, code) bfd_arch_info_type *arch; bfd_reloc_code_real_type code; { if ((int) code < (int) R_NO_RELOCATION + 255) { BFD_ASSERT ((int) som_hppa_howto_table[(int) code].type == (int) code); return &som_hppa_howto_table[(int) code]; } return (reloc_howto_type *) 0; } /* Perform some initialization for an object. Save results of this initialization in the BFD. */ static bfd_target * som_object_setup (abfd, file_hdrp, aux_hdrp) bfd *abfd; struct header *file_hdrp; struct som_exec_auxhdr *aux_hdrp; { /* som_mkobject will set bfd_error if som_mkobject fails. */ if (som_mkobject (abfd) != true) return 0; /* Set BFD flags based on what information is available in the SOM. */ abfd->flags = NO_FLAGS; if (file_hdrp->symbol_total) abfd->flags |= HAS_LINENO | HAS_DEBUG | HAS_SYMS | HAS_LOCALS; switch (file_hdrp->a_magic) { case DEMAND_MAGIC: abfd->flags |= (D_PAGED | WP_TEXT | EXEC_P); break; case SHARE_MAGIC: abfd->flags |= (WP_TEXT | EXEC_P); break; case EXEC_MAGIC: abfd->flags |= (EXEC_P); break; case RELOC_MAGIC: abfd->flags |= HAS_RELOC; break; default: break; } bfd_get_start_address (abfd) = aux_hdrp->exec_entry; bfd_default_set_arch_mach (abfd, bfd_arch_hppa, 0); bfd_get_symcount (abfd) = file_hdrp->symbol_total; /* Initialize the saved symbol table and string table to NULL. Save important offsets and sizes from the SOM header into the BFD. */ obj_som_stringtab (abfd) = (char *) NULL; obj_som_symtab (abfd) = (som_symbol_type *) NULL; obj_som_stringtab_size (abfd) = file_hdrp->symbol_strings_size; obj_som_sym_filepos (abfd) = file_hdrp->symbol_location; obj_som_str_filepos (abfd) = file_hdrp->symbol_strings_location; obj_som_reloc_filepos (abfd) = file_hdrp->fixup_request_location; obj_som_exec_data (abfd) = (struct som_exec_data *) bfd_zalloc (abfd, sizeof (struct som_exec_data )); if (obj_som_exec_data (abfd) == NULL) { bfd_set_error (bfd_error_no_memory); return NULL; } obj_som_exec_data (abfd)->system_id = file_hdrp->system_id; obj_som_exec_data (abfd)->exec_flags = aux_hdrp->exec_flags; return abfd->xvec; } /* Convert all of the space and subspace info into BFD sections. Each space contains a number of subspaces, which in turn describe the mapping between regions of the exec file, and the address space that the program runs in. BFD sections which correspond to spaces will overlap the sections for the associated subspaces. */ static boolean setup_sections (abfd, file_hdr) bfd *abfd; struct header *file_hdr; { char *space_strings; int space_index; unsigned int total_subspaces = 0; /* First, read in space names */ space_strings = malloc (file_hdr->space_strings_size); if (!space_strings && file_hdr->space_strings_size != 0) { bfd_set_error (bfd_error_no_memory); goto error_return; } if (bfd_seek (abfd, file_hdr->space_strings_location, SEEK_SET) < 0) goto error_return; if (bfd_read (space_strings, 1, file_hdr->space_strings_size, abfd) != file_hdr->space_strings_size) goto error_return; /* Loop over all of the space dictionaries, building up sections */ for (space_index = 0; space_index < file_hdr->space_total; space_index++) { struct space_dictionary_record space; struct subspace_dictionary_record subspace, save_subspace; int subspace_index; asection *space_asect; char *newname; /* Read the space dictionary element */ if (bfd_seek (abfd, file_hdr->space_location + space_index * sizeof space, SEEK_SET) < 0) goto error_return; if (bfd_read (&space, 1, sizeof space, abfd) != sizeof space) goto error_return; /* Setup the space name string */ space.name.n_name = space.name.n_strx + space_strings; /* Make a section out of it */ newname = bfd_alloc (abfd, strlen (space.name.n_name) + 1); if (!newname) goto error_return; strcpy (newname, space.name.n_name); space_asect = bfd_make_section_anyway (abfd, newname); if (!space_asect) goto error_return; if (space.is_loadable == 0) space_asect->flags |= SEC_DEBUGGING; /* Set up all the attributes for the space. */ if (bfd_som_set_section_attributes (space_asect, space.is_defined, space.is_private, space.sort_key, space.space_number) == false) goto error_return; /* Now, read in the first subspace for this space */ if (bfd_seek (abfd, file_hdr->subspace_location + space.subspace_index * sizeof subspace, SEEK_SET) < 0) goto error_return; if (bfd_read (&subspace, 1, sizeof subspace, abfd) != sizeof subspace) goto error_return; /* Seek back to the start of the subspaces for loop below */ if (bfd_seek (abfd, file_hdr->subspace_location + space.subspace_index * sizeof subspace, SEEK_SET) < 0) goto error_return; /* Setup the start address and file loc from the first subspace record */ space_asect->vma = subspace.subspace_start; space_asect->filepos = subspace.file_loc_init_value; space_asect->alignment_power = log2 (subspace.alignment); if (space_asect->alignment_power == -1) goto error_return; /* Initialize save_subspace so we can reliably determine if this loop placed any useful values into it. */ memset (&save_subspace, 0, sizeof (struct subspace_dictionary_record)); /* Loop over the rest of the subspaces, building up more sections */ for (subspace_index = 0; subspace_index < space.subspace_quantity; subspace_index++) { asection *subspace_asect; /* Read in the next subspace */ if (bfd_read (&subspace, 1, sizeof subspace, abfd) != sizeof subspace) goto error_return; /* Setup the subspace name string */ subspace.name.n_name = subspace.name.n_strx + space_strings; newname = bfd_alloc (abfd, strlen (subspace.name.n_name) + 1); if (!newname) goto error_return; strcpy (newname, subspace.name.n_name); /* Make a section out of this subspace */ subspace_asect = bfd_make_section_anyway (abfd, newname); if (!subspace_asect) goto error_return; /* Store private information about the section. */ if (bfd_som_set_subsection_attributes (subspace_asect, space_asect, subspace.access_control_bits, subspace.sort_key, subspace.quadrant) == false) goto error_return; /* Keep an easy mapping between subspaces and sections. */ subspace_asect->target_index = total_subspaces++; /* Set SEC_READONLY and SEC_CODE/SEC_DATA as specified by the access_control_bits in the subspace header. */ switch (subspace.access_control_bits >> 4) { /* Readonly data. */ case 0x0: subspace_asect->flags |= SEC_DATA | SEC_READONLY; break; /* Normal data. */ case 0x1: subspace_asect->flags |= SEC_DATA; break; /* Readonly code and the gateways. Gateways have other attributes which do not map into anything BFD knows about. */ case 0x2: case 0x4: case 0x5: case 0x6: case 0x7: subspace_asect->flags |= SEC_CODE | SEC_READONLY; break; /* dynamic (writable) code. */ case 0x3: subspace_asect->flags |= SEC_CODE; break; } if (subspace.dup_common || subspace.is_common) subspace_asect->flags |= SEC_IS_COMMON; else if (subspace.subspace_length > 0) subspace_asect->flags |= SEC_HAS_CONTENTS; if (subspace.is_loadable) subspace_asect->flags |= SEC_ALLOC | SEC_LOAD; else subspace_asect->flags |= SEC_DEBUGGING; if (subspace.code_only) subspace_asect->flags |= SEC_CODE; /* Both file_loc_init_value and initialization_length will be zero for a BSS like subspace. */ if (subspace.file_loc_init_value == 0 && subspace.initialization_length == 0) subspace_asect->flags &= ~(SEC_DATA | SEC_LOAD); /* This subspace has relocations. The fixup_request_quantity is a byte count for the number of entries in the relocation stream; it is not the actual number of relocations in the subspace. */ if (subspace.fixup_request_quantity != 0) { subspace_asect->flags |= SEC_RELOC; subspace_asect->rel_filepos = subspace.fixup_request_index; som_section_data (subspace_asect)->reloc_size = subspace.fixup_request_quantity; /* We can not determine this yet. When we read in the relocation table the correct value will be filled in. */ subspace_asect->reloc_count = -1; } /* Update save_subspace if appropriate. */ if (subspace.file_loc_init_value > save_subspace.file_loc_init_value) save_subspace = subspace; subspace_asect->vma = subspace.subspace_start; subspace_asect->_cooked_size = subspace.subspace_length; subspace_asect->_raw_size = subspace.subspace_length; subspace_asect->filepos = subspace.file_loc_init_value; subspace_asect->alignment_power = log2 (subspace.alignment); if (subspace_asect->alignment_power == -1) goto error_return; } /* Yow! there is no subspace within the space which actually has initialized information in it; this should never happen as far as I know. */ if (!save_subspace.file_loc_init_value) goto error_return; /* Setup the sizes for the space section based upon the info in the last subspace of the space. */ space_asect->_cooked_size = save_subspace.subspace_start - space_asect->vma + save_subspace.subspace_length; space_asect->_raw_size = save_subspace.file_loc_init_value - space_asect->filepos + save_subspace.initialization_length; } if (space_strings != NULL) free (space_strings); return true; error_return: if (space_strings != NULL) free (space_strings); return false; } /* Read in a SOM object and make it into a BFD. */ static bfd_target * som_object_p (abfd) bfd *abfd; { struct header file_hdr; struct som_exec_auxhdr aux_hdr; if (bfd_read ((PTR) & file_hdr, 1, FILE_HDR_SIZE, abfd) != FILE_HDR_SIZE) { if (bfd_get_error () != bfd_error_system_call) bfd_set_error (bfd_error_wrong_format); return 0; } if (!_PA_RISC_ID (file_hdr.system_id)) { bfd_set_error (bfd_error_wrong_format); return 0; } switch (file_hdr.a_magic) { case RELOC_MAGIC: case EXEC_MAGIC: case SHARE_MAGIC: case DEMAND_MAGIC: #ifdef DL_MAGIC case DL_MAGIC: #endif #ifdef SHL_MAGIC case SHL_MAGIC: #endif #ifdef EXECLIBMAGIC case EXECLIBMAGIC: #endif #ifdef SHARED_MAGIC_CNX case SHARED_MAGIC_CNX: #endif break; default: bfd_set_error (bfd_error_wrong_format); return 0; } if (file_hdr.version_id != VERSION_ID && file_hdr.version_id != NEW_VERSION_ID) { bfd_set_error (bfd_error_wrong_format); return 0; } /* If the aux_header_size field in the file header is zero, then this object is an incomplete executable (a .o file). Do not try to read a non-existant auxiliary header. */ memset (&aux_hdr, 0, sizeof (struct som_exec_auxhdr)); if (file_hdr.aux_header_size != 0) { if (bfd_read ((PTR) & aux_hdr, 1, AUX_HDR_SIZE, abfd) != AUX_HDR_SIZE) { if (bfd_get_error () != bfd_error_system_call) bfd_set_error (bfd_error_wrong_format); return 0; } } if (!setup_sections (abfd, &file_hdr)) { /* setup_sections does not bubble up a bfd error code. */ bfd_set_error (bfd_error_bad_value); return 0; } /* This appears to be a valid SOM object. Do some initialization. */ return som_object_setup (abfd, &file_hdr, &aux_hdr); } /* Create a SOM object. */ static boolean som_mkobject (abfd) bfd *abfd; { /* Allocate memory to hold backend information. */ abfd->tdata.som_data = (struct som_data_struct *) bfd_zalloc (abfd, sizeof (struct som_data_struct)); if (abfd->tdata.som_data == NULL) { bfd_set_error (bfd_error_no_memory); return false; } return true; } /* Initialize some information in the file header. This routine makes not attempt at doing the right thing for a full executable; it is only meant to handle relocatable objects. */ static boolean som_prep_headers (abfd) bfd *abfd; { struct header *file_hdr; asection *section; /* Make and attach a file header to the BFD. */ file_hdr = (struct header *) bfd_zalloc (abfd, sizeof (struct header)); if (file_hdr == NULL) { bfd_set_error (bfd_error_no_memory); return false; } obj_som_file_hdr (abfd) = file_hdr; /* FIXME. This should really be conditional based on whether or not PA1.1 instructions/registers have been used. */ if (abfd->flags & EXEC_P) file_hdr->system_id = obj_som_exec_data (abfd)->system_id; else file_hdr->system_id = CPU_PA_RISC1_0; if (abfd->flags & EXEC_P) { if (abfd->flags & D_PAGED) file_hdr->a_magic = DEMAND_MAGIC; else if (abfd->flags & WP_TEXT) file_hdr->a_magic = SHARE_MAGIC; else file_hdr->a_magic = EXEC_MAGIC; } else file_hdr->a_magic = RELOC_MAGIC; /* Only new format SOM is supported. */ file_hdr->version_id = NEW_VERSION_ID; /* These fields are optional, and embedding timestamps is not always a wise thing to do, it makes comparing objects during a multi-stage bootstrap difficult. */ file_hdr->file_time.secs = 0; file_hdr->file_time.nanosecs = 0; file_hdr->entry_space = 0; file_hdr->entry_subspace = 0; file_hdr->entry_offset = 0; file_hdr->presumed_dp = 0; /* Now iterate over the sections translating information from BFD sections to SOM spaces/subspaces. */ for (section = abfd->sections; section != NULL; section = section->next) { /* Ignore anything which has not been marked as a space or subspace. */ if (!som_is_space (section) && !som_is_subspace (section)) continue; if (som_is_space (section)) { /* Allocate space for the space dictionary. */ som_section_data (section)->space_dict = (struct space_dictionary_record *) bfd_zalloc (abfd, sizeof (struct space_dictionary_record)); if (som_section_data (section)->space_dict == NULL) { bfd_set_error (bfd_error_no_memory); return false; } /* Set space attributes. Note most attributes of SOM spaces are set based on the subspaces it contains. */ som_section_data (section)->space_dict->loader_fix_index = -1; som_section_data (section)->space_dict->init_pointer_index = -1; /* Set more attributes that were stuffed away in private data. */ som_section_data (section)->space_dict->sort_key = som_section_data (section)->copy_data->sort_key; som_section_data (section)->space_dict->is_defined = som_section_data (section)->copy_data->is_defined; som_section_data (section)->space_dict->is_private = som_section_data (section)->copy_data->is_private; som_section_data (section)->space_dict->space_number = section->target_index; } else { /* Allocate space for the subspace dictionary. */ som_section_data (section)->subspace_dict = (struct subspace_dictionary_record *) bfd_zalloc (abfd, sizeof (struct subspace_dictionary_record)); if (som_section_data (section)->subspace_dict == NULL) { bfd_set_error (bfd_error_no_memory); return false; } /* Set subspace attributes. Basic stuff is done here, additional attributes are filled in later as more information becomes available. */ if (section->flags & SEC_IS_COMMON) { som_section_data (section)->subspace_dict->dup_common = 1; som_section_data (section)->subspace_dict->is_common = 1; } if (section->flags & SEC_ALLOC) som_section_data (section)->subspace_dict->is_loadable = 1; if (section->flags & SEC_CODE) som_section_data (section)->subspace_dict->code_only = 1; som_section_data (section)->subspace_dict->subspace_start = section->vma; som_section_data (section)->subspace_dict->subspace_length = bfd_section_size (abfd, section); som_section_data (section)->subspace_dict->initialization_length = bfd_section_size (abfd, section); som_section_data (section)->subspace_dict->alignment = 1 << section->alignment_power; /* Set more attributes that were stuffed away in private data. */ som_section_data (section)->subspace_dict->sort_key = som_section_data (section)->copy_data->sort_key; som_section_data (section)->subspace_dict->access_control_bits = som_section_data (section)->copy_data->access_control_bits; som_section_data (section)->subspace_dict->quadrant = som_section_data (section)->copy_data->quadrant; } } return true; } /* Return true if the given section is a SOM space, false otherwise. */ static boolean som_is_space (section) asection *section; { /* If no copy data is available, then it's neither a space nor a subspace. */ if (som_section_data (section)->copy_data == NULL) return false; /* If the containing space isn't the same as the given section, then this isn't a space. */ if (som_section_data (section)->copy_data->container != section) return false; /* OK. Must be a space. */ return true; } /* Return true if the given section is a SOM subspace, false otherwise. */ static boolean som_is_subspace (section) asection *section; { /* If no copy data is available, then it's neither a space nor a subspace. */ if (som_section_data (section)->copy_data == NULL) return false; /* If the containing space is the same as the given section, then this isn't a subspace. */ if (som_section_data (section)->copy_data->container == section) return false; /* OK. Must be a subspace. */ return true; } /* Return true if the given space containins the given subspace. It is safe to assume space really is a space, and subspace really is a subspace. */ static boolean som_is_container (space, subspace) asection *space, *subspace; { return som_section_data (subspace)->copy_data->container == space; } /* Count and return the number of spaces attached to the given BFD. */ static unsigned long som_count_spaces (abfd) bfd *abfd; { int count = 0; asection *section; for (section = abfd->sections; section != NULL; section = section->next) count += som_is_space (section); return count; } /* Count the number of subspaces attached to the given BFD. */ static unsigned long som_count_subspaces (abfd) bfd *abfd; { int count = 0; asection *section; for (section = abfd->sections; section != NULL; section = section->next) count += som_is_subspace (section); return count; } /* Return -1, 0, 1 indicating the relative ordering of sym1 and sym2. We desire symbols to be ordered starting with the symbol with the highest relocation count down to the symbol with the lowest relocation count. Doing so compacts the relocation stream. */ static int compare_syms (sym1, sym2) asymbol **sym1; asymbol **sym2; { unsigned int count1, count2; /* Get relocation count for each symbol. Note that the count is stored in the udata pointer for section symbols! */ if ((*sym1)->flags & BSF_SECTION_SYM) count1 = (int)(*sym1)->udata; else count1 = som_symbol_data (*sym1)->reloc_count; if ((*sym2)->flags & BSF_SECTION_SYM) count2 = (int)(*sym2)->udata; else count2 = som_symbol_data (*sym2)->reloc_count; /* Return the appropriate value. */ if (count1 < count2) return 1; else if (count1 > count2) return -1; return 0; } /* Perform various work in preparation for emitting the fixup stream. */ static void som_prep_for_fixups (abfd, syms, num_syms) bfd *abfd; asymbol **syms; unsigned long num_syms; { int i; asection *section; /* Most SOM relocations involving a symbol have a length which is dependent on the index of the symbol. So symbols which are used often in relocations should have a small index. */ /* First initialize the counters for each symbol. */ for (i = 0; i < num_syms; i++) { /* Handle a section symbol; these have no pointers back to the SOM symbol info. So we just use the pointer field (udata) to hold the relocation count. */ if (som_symbol_data (syms[i]) == NULL || syms[i]->flags & BSF_SECTION_SYM) { syms[i]->flags |= BSF_SECTION_SYM; syms[i]->udata = (PTR) 0; } else som_symbol_data (syms[i])->reloc_count = 0; } /* Now that the counters are initialized, make a weighted count of how often a given symbol is used in a relocation. */ for (section = abfd->sections; section != NULL; section = section->next) { int i; /* Does this section have any relocations? */ if (section->reloc_count <= 0) continue; /* Walk through each relocation for this section. */ for (i = 1; i < section->reloc_count; i++) { arelent *reloc = section->orelocation[i]; int scale; /* A relocation against a symbol in the *ABS* section really does not have a symbol. Likewise if the symbol isn't associated with any section. */ if (reloc->sym_ptr_ptr == NULL || (*reloc->sym_ptr_ptr)->section == &bfd_abs_section) continue; /* Scaling to encourage symbols involved in R_DP_RELATIVE and R_CODE_ONE_SYMBOL relocations to come first. These two relocations have single byte versions if the symbol index is very small. */ if (reloc->howto->type == R_DP_RELATIVE || reloc->howto->type == R_CODE_ONE_SYMBOL) scale = 2; else scale = 1; /* Handle section symbols by ramming the count in the udata field. It will not be used and the count is very important for these symbols. */ if ((*reloc->sym_ptr_ptr)->flags & BSF_SECTION_SYM) { (*reloc->sym_ptr_ptr)->udata = (PTR) ((int) (*reloc->sym_ptr_ptr)->udata + scale); continue; } /* A normal symbol. Increment the count. */ som_symbol_data (*reloc->sym_ptr_ptr)->reloc_count += scale; } } /* Now sort the symbols. */ qsort (syms, num_syms, sizeof (asymbol *), compare_syms); /* Compute the symbol indexes, they will be needed by the relocation code. */ for (i = 0; i < num_syms; i++) { /* A section symbol. Again, there is no pointer to backend symbol information, so we reuse (abuse) the udata field again. */ if (syms[i]->flags & BSF_SECTION_SYM) syms[i]->udata = (PTR) i; else som_symbol_data (syms[i])->index = i; } } static boolean som_write_fixups (abfd, current_offset, total_reloc_sizep) bfd *abfd; unsigned long current_offset; unsigned int *total_reloc_sizep; { unsigned int i, j; /* Chunk of memory that we can use as buffer space, then throw away. */ unsigned char tmp_space[SOM_TMP_BUFSIZE]; unsigned char *p; unsigned int total_reloc_size = 0; unsigned int subspace_reloc_size = 0; unsigned int num_spaces = obj_som_file_hdr (abfd)->space_total; asection *section = abfd->sections; memset (tmp_space, 0, SOM_TMP_BUFSIZE); p = tmp_space; /* All the fixups for a particular subspace are emitted in a single stream. All the subspaces for a particular space are emitted as a single stream. So, to get all the locations correct one must iterate through all the spaces, for each space iterate through its subspaces and output a fixups stream. */ for (i = 0; i < num_spaces; i++) { asection *subsection; /* Find a space. */ while (!som_is_space (section)) section = section->next; /* Now iterate through each of its subspaces. */ for (subsection = abfd->sections; subsection != NULL; subsection = subsection->next) { int reloc_offset, current_rounding_mode; /* Find a subspace of this space. */ if (!som_is_subspace (subsection) || !som_is_container (section, subsection)) continue; /* If this subspace had no relocations, then we're finished with it. */ if (subsection->reloc_count <= 0) { som_section_data (subsection)->subspace_dict->fixup_request_index = -1; continue; } /* This subspace has some relocations. Put the relocation stream index into the subspace record. */ som_section_data (subsection)->subspace_dict->fixup_request_index = total_reloc_size; /* To make life easier start over with a clean slate for each subspace. Seek to the start of the relocation stream for this subspace in preparation for writing out its fixup stream. */ if (bfd_seek (abfd, current_offset + total_reloc_size, SEEK_SET) < 0) return false; /* Buffer space has already been allocated. Just perform some initialization here. */ p = tmp_space; subspace_reloc_size = 0; reloc_offset = 0; som_initialize_reloc_queue (reloc_queue); current_rounding_mode = R_N_MODE; /* Translate each BFD relocation into one or more SOM relocations. */ for (j = 0; j < subsection->reloc_count; j++) { arelent *bfd_reloc = subsection->orelocation[j]; unsigned int skip; int sym_num; /* Get the symbol number. Remember it's stored in a special place for section symbols. */ if ((*bfd_reloc->sym_ptr_ptr)->flags & BSF_SECTION_SYM) sym_num = (int) (*bfd_reloc->sym_ptr_ptr)->udata; else sym_num = som_symbol_data (*bfd_reloc->sym_ptr_ptr)->index; /* If there is not enough room for the next couple relocations, then dump the current buffer contents now. Also reinitialize the relocation queue. No single BFD relocation could ever translate into more than 100 bytes of SOM relocations (20bytes is probably the upper limit, but leave lots of space for growth). */ if (p - tmp_space + 100 > SOM_TMP_BUFSIZE) { if (bfd_write ((PTR) tmp_space, p - tmp_space, 1, abfd) != p - tmp_space) return false; p = tmp_space; som_initialize_reloc_queue (reloc_queue); } /* Emit R_NO_RELOCATION fixups to map any bytes which were skipped. */ skip = bfd_reloc->address - reloc_offset; p = som_reloc_skip (abfd, skip, p, &subspace_reloc_size, reloc_queue); /* Update reloc_offset for the next iteration. Many relocations do not consume input bytes. They are markers, or set state necessary to perform some later relocation. */ switch (bfd_reloc->howto->type) { /* This only needs to handle relocations that may be made by hppa_som_gen_reloc. */ case R_ENTRY: case R_EXIT: case R_N_MODE: case R_S_MODE: case R_D_MODE: case R_R_MODE: case R_FSEL: case R_LSEL: case R_RSEL: reloc_offset = bfd_reloc->address; break; default: reloc_offset = bfd_reloc->address + 4; break; } /* Now the actual relocation we care about. */ switch (bfd_reloc->howto->type) { case R_PCREL_CALL: case R_ABS_CALL: p = som_reloc_call (abfd, p, &subspace_reloc_size, bfd_reloc, sym_num, reloc_queue); break; case R_CODE_ONE_SYMBOL: case R_DP_RELATIVE: /* Account for any addend. */ if (bfd_reloc->addend) p = som_reloc_addend (abfd, bfd_reloc->addend, p, &subspace_reloc_size, reloc_queue); if (sym_num < 0x20) { bfd_put_8 (abfd, bfd_reloc->howto->type + sym_num, p); subspace_reloc_size += 1; p += 1; } else if (sym_num < 0x100) { bfd_put_8 (abfd, bfd_reloc->howto->type + 32, p); bfd_put_8 (abfd, sym_num, p + 1); p = try_prev_fixup (abfd, &subspace_reloc_size, p, 2, reloc_queue); } else if (sym_num < 0x10000000) { bfd_put_8 (abfd, bfd_reloc->howto->type + 33, p); bfd_put_8 (abfd, sym_num >> 16, p + 1); bfd_put_16 (abfd, sym_num, p + 2); p = try_prev_fixup (abfd, &subspace_reloc_size, p, 4, reloc_queue); } else abort (); break; case R_DATA_ONE_SYMBOL: case R_DATA_PLABEL: case R_CODE_PLABEL: case R_DLT_REL: /* Account for any addend. */ if (bfd_reloc->addend) p = som_reloc_addend (abfd, bfd_reloc->addend, p, &subspace_reloc_size, reloc_queue); if (sym_num < 0x100) { bfd_put_8 (abfd, bfd_reloc->howto->type, p); bfd_put_8 (abfd, sym_num, p + 1); p = try_prev_fixup (abfd, &subspace_reloc_size, p, 2, reloc_queue); } else if (sym_num < 0x10000000) { bfd_put_8 (abfd, bfd_reloc->howto->type + 1, p); bfd_put_8 (abfd, sym_num >> 16, p + 1); bfd_put_16 (abfd, sym_num, p + 2); p = try_prev_fixup (abfd, &subspace_reloc_size, p, 4, reloc_queue); } else abort (); break; case R_ENTRY: { int *descp = (int *) som_symbol_data (*bfd_reloc->sym_ptr_ptr)->unwind; bfd_put_8 (abfd, R_ENTRY, p); bfd_put_32 (abfd, descp[0], p + 1); bfd_put_32 (abfd, descp[1], p + 5); p = try_prev_fixup (abfd, &subspace_reloc_size, p, 9, reloc_queue); break; } case R_EXIT: bfd_put_8 (abfd, R_EXIT, p); subspace_reloc_size += 1; p += 1; break; case R_N_MODE: case R_S_MODE: case R_D_MODE: case R_R_MODE: /* If this relocation requests the current rounding mode, then it is redundant. */ if (bfd_reloc->howto->type != current_rounding_mode) { bfd_put_8 (abfd, bfd_reloc->howto->type, p); subspace_reloc_size += 1; p += 1; current_rounding_mode = bfd_reloc->howto->type; } break; case R_FSEL: case R_LSEL: case R_RSEL: bfd_put_8 (abfd, bfd_reloc->howto->type, p); subspace_reloc_size += 1; p += 1; break; /* Put a "R_RESERVED" relocation in the stream if we hit something we do not understand. The linker will complain loudly if this ever happens. */ default: bfd_put_8 (abfd, 0xff, p); subspace_reloc_size += 1; p += 1; break; } } /* Last BFD relocation for a subspace has been processed. Map the rest of the subspace with R_NO_RELOCATION fixups. */ p = som_reloc_skip (abfd, bfd_section_size (abfd, subsection) - reloc_offset, p, &subspace_reloc_size, reloc_queue); /* Scribble out the relocations. */ if (bfd_write ((PTR) tmp_space, p - tmp_space, 1, abfd) != p - tmp_space) return false; p = tmp_space; total_reloc_size += subspace_reloc_size; som_section_data (subsection)->subspace_dict->fixup_request_quantity = subspace_reloc_size; } section = section->next; } *total_reloc_sizep = total_reloc_size; return true; } /* Write out the space/subspace string table. */ static boolean som_write_space_strings (abfd, current_offset, string_sizep) bfd *abfd; unsigned long current_offset; unsigned int *string_sizep; { /* Chunk of memory that we can use as buffer space, then throw away. */ unsigned char tmp_space[SOM_TMP_BUFSIZE]; unsigned char *p; unsigned int strings_size = 0; asection *section; memset (tmp_space, 0, SOM_TMP_BUFSIZE); p = tmp_space; /* Seek to the start of the space strings in preparation for writing them out. */ if (bfd_seek (abfd, current_offset, SEEK_SET) < 0) return false; /* Walk through all the spaces and subspaces (order is not important) building up and writing string table entries for their names. */ for (section = abfd->sections; section != NULL; section = section->next) { int length; /* Only work with space/subspaces; avoid any other sections which might have been made (.text for example). */ if (!som_is_space (section) && !som_is_subspace (section)) continue; /* Get the length of the space/subspace name. */ length = strlen (section->name); /* If there is not enough room for the next entry, then dump the current buffer contents now. Each entry will take 4 bytes to hold the string length + the string itself + null terminator. */ if (p - tmp_space + 5 + length > SOM_TMP_BUFSIZE) { if (bfd_write ((PTR) &tmp_space[0], p - tmp_space, 1, abfd) != p - tmp_space) return false; /* Reset to beginning of the buffer space. */ p = tmp_space; } /* First element in a string table entry is the length of the string. Alignment issues are already handled. */ bfd_put_32 (abfd, length, p); p += 4; strings_size += 4; /* Record the index in the space/subspace records. */ if (som_is_space (section)) som_section_data (section)->space_dict->name.n_strx = strings_size; else som_section_data (section)->subspace_dict->name.n_strx = strings_size; /* Next comes the string itself + a null terminator. */ strcpy (p, section->name); p += length + 1; strings_size += length + 1; /* Always align up to the next word boundary. */ while (strings_size % 4) { bfd_put_8 (abfd, 0, p); p++; strings_size++; } } /* Done with the space/subspace strings. Write out any information contained in a partial block. */ if (bfd_write ((PTR) &tmp_space[0], p - tmp_space, 1, abfd) != p - tmp_space) return false; *string_sizep = strings_size; return true; } /* Write out the symbol string table. */ static boolean som_write_symbol_strings (abfd, current_offset, syms, num_syms, string_sizep) bfd *abfd; unsigned long current_offset; asymbol **syms; unsigned int num_syms; unsigned int *string_sizep; { unsigned int i; /* Chunk of memory that we can use as buffer space, then throw away. */ unsigned char tmp_space[SOM_TMP_BUFSIZE]; unsigned char *p; unsigned int strings_size = 0; memset (tmp_space, 0, SOM_TMP_BUFSIZE); p = tmp_space; /* Seek to the start of the space strings in preparation for writing them out. */ if (bfd_seek (abfd, current_offset, SEEK_SET) < 0) return false; for (i = 0; i < num_syms; i++) { int length = strlen (syms[i]->name); /* If there is not enough room for the next entry, then dump the current buffer contents now. */ if (p - tmp_space + 5 + length > SOM_TMP_BUFSIZE) { if (bfd_write ((PTR) &tmp_space[0], p - tmp_space, 1, abfd) != p - tmp_space) return false; /* Reset to beginning of the buffer space. */ p = tmp_space; } /* First element in a string table entry is the length of the string. This must always be 4 byte aligned. This is also an appropriate time to fill in the string index field in the symbol table entry. */ bfd_put_32 (abfd, length, p); strings_size += 4; p += 4; /* Next comes the string itself + a null terminator. */ strcpy (p, syms[i]->name); /* ACK. FIXME. */ syms[i]->name = (char *)strings_size; p += length + 1; strings_size += length + 1; /* Always align up to the next word boundary. */ while (strings_size % 4) { bfd_put_8 (abfd, 0, p); strings_size++; p++; } } /* Scribble out any partial block. */ if (bfd_write ((PTR) &tmp_space[0], p - tmp_space, 1, abfd) != p - tmp_space) return false; *string_sizep = strings_size; return true; } /* Compute variable information to be placed in the SOM headers, space/subspace dictionaries, relocation streams, etc. Begin writing parts of the object file. */ static boolean som_begin_writing (abfd) bfd *abfd; { unsigned long current_offset = 0; int strings_size = 0; unsigned int total_reloc_size = 0; unsigned long num_spaces, num_subspaces, num_syms, i; asection *section; asymbol **syms = bfd_get_outsymbols (abfd); unsigned int total_subspaces = 0; struct som_exec_auxhdr exec_header; /* The file header will always be first in an object file, everything else can be in random locations. To keep things "simple" BFD will lay out the object file in the manner suggested by the PRO ABI for PA-RISC Systems. */ /* Before any output can really begin offsets for all the major portions of the object file must be computed. So, starting with the initial file header compute (and sometimes write) each portion of the object file. */ /* Make room for the file header, it's contents are not complete yet, so it can not be written at this time. */ current_offset += sizeof (struct header); /* Any auxiliary headers will follow the file header. Right now we support only the copyright and version headers. */ obj_som_file_hdr (abfd)->aux_header_location = current_offset; obj_som_file_hdr (abfd)->aux_header_size = 0; if (abfd->flags & EXEC_P) { /* Parts of the exec header will be filled in later, so delay writing the header itself. Fill in the defaults, and write it later. */ current_offset += sizeof (exec_header); obj_som_file_hdr (abfd)->aux_header_size += sizeof (exec_header); memset (&exec_header, 0, sizeof (exec_header)); exec_header.som_auxhdr.type = HPUX_AUX_ID; exec_header.som_auxhdr.length = 40; } if (obj_som_version_hdr (abfd) != NULL) { unsigned int len; if (bfd_seek (abfd, current_offset, SEEK_SET) < 0) return false; /* Write the aux_id structure and the string length. */ len = sizeof (struct aux_id) + sizeof (unsigned int); obj_som_file_hdr (abfd)->aux_header_size += len; current_offset += len; if (bfd_write ((PTR) obj_som_version_hdr (abfd), len, 1, abfd) != len) return false; /* Write the version string. */ len = obj_som_version_hdr (abfd)->header_id.length - sizeof (int); obj_som_file_hdr (abfd)->aux_header_size += len; current_offset += len; if (bfd_write ((PTR) obj_som_version_hdr (abfd)->user_string, len, 1, abfd) != len) return false; } if (obj_som_copyright_hdr (abfd) != NULL) { unsigned int len; if (bfd_seek (abfd, current_offset, SEEK_SET) < 0) return false; /* Write the aux_id structure and the string length. */ len = sizeof (struct aux_id) + sizeof (unsigned int); obj_som_file_hdr (abfd)->aux_header_size += len; current_offset += len; if (bfd_write ((PTR) obj_som_copyright_hdr (abfd), len, 1, abfd) != len) return false; /* Write the copyright string. */ len = obj_som_copyright_hdr (abfd)->header_id.length - sizeof (int); obj_som_file_hdr (abfd)->aux_header_size += len; current_offset += len; if (bfd_write ((PTR) obj_som_copyright_hdr (abfd)->copyright, len, 1, abfd) != len) return false; } /* Next comes the initialization pointers; we have no initialization pointers, so current offset does not change. */ obj_som_file_hdr (abfd)->init_array_location = current_offset; obj_som_file_hdr (abfd)->init_array_total = 0; /* Next are the space records. These are fixed length records. Count the number of spaces to determine how much room is needed in the object file for the space records. The names of the spaces are stored in a separate string table, and the index for each space into the string table is computed below. Therefore, it is not possible to write the space headers at this time. */ num_spaces = som_count_spaces (abfd); obj_som_file_hdr (abfd)->space_location = current_offset; obj_som_file_hdr (abfd)->space_total = num_spaces; current_offset += num_spaces * sizeof (struct space_dictionary_record); /* Next are the subspace records. These are fixed length records. Count the number of subspaes to determine how much room is needed in the object file for the subspace records. A variety if fields in the subspace record are still unknown at this time (index into string table, fixup stream location/size, etc). */ num_subspaces = som_count_subspaces (abfd); obj_som_file_hdr (abfd)->subspace_location = current_offset; obj_som_file_hdr (abfd)->subspace_total = num_subspaces; current_offset += num_subspaces * sizeof (struct subspace_dictionary_record); /* Next is the string table for the space/subspace names. We will build and write the string table on the fly. At the same time we will fill in the space/subspace name index fields. */ /* The string table needs to be aligned on a word boundary. */ if (current_offset % 4) current_offset += (4 - (current_offset % 4)); /* Mark the offset of the space/subspace string table in the file header. */ obj_som_file_hdr (abfd)->space_strings_location = current_offset; /* Scribble out the space strings. */ if (som_write_space_strings (abfd, current_offset, &strings_size) == false) return false; /* Record total string table size in the header and update the current offset. */ obj_som_file_hdr (abfd)->space_strings_size = strings_size; current_offset += strings_size; /* Next is the symbol table. These are fixed length records. Count the number of symbols to determine how much room is needed in the object file for the symbol table. The names of the symbols are stored in a separate string table, and the index for each symbol name into the string table is computed below. Therefore, it is not possible to write the symobl table at this time. */ num_syms = bfd_get_symcount (abfd); obj_som_file_hdr (abfd)->symbol_location = current_offset; obj_som_file_hdr (abfd)->symbol_total = num_syms; current_offset += num_syms * sizeof (struct symbol_dictionary_record); /* Do prep work before handling fixups. */ som_prep_for_fixups (abfd, syms, num_syms); /* Next comes the fixup stream which starts on a word boundary. */ if (current_offset % 4) current_offset += (4 - (current_offset % 4)); obj_som_file_hdr (abfd)->fixup_request_location = current_offset; /* Write the fixups and update fields in subspace headers which relate to the fixup stream. */ if (som_write_fixups (abfd, current_offset, &total_reloc_size) == false) return false; /* Record the total size of the fixup stream in the file header. */ obj_som_file_hdr (abfd)->fixup_request_total = total_reloc_size; current_offset += total_reloc_size; /* Next are the symbol strings. Align them to a word boundary. */ if (current_offset % 4) current_offset += (4 - (current_offset % 4)); obj_som_file_hdr (abfd)->symbol_strings_location = current_offset; /* Scribble out the symbol strings. */ if (som_write_symbol_strings (abfd, current_offset, syms, num_syms, &strings_size) == false) return false; /* Record total string table size in header and update the current offset. */ obj_som_file_hdr (abfd)->symbol_strings_size = strings_size; current_offset += strings_size; /* Next is the compiler records. We do not use these. */ obj_som_file_hdr (abfd)->compiler_location = current_offset; obj_som_file_hdr (abfd)->compiler_total = 0; /* Now compute the file positions for the loadable subspaces, taking care to make sure everything stays properly aligned. */ section = abfd->sections; for (i = 0; i < num_spaces; i++) { asection *subsection; int first_subspace; /* Find a space. */ while (!som_is_space (section)) section = section->next; first_subspace = 1; /* Now look for all its subspaces. */ for (subsection = abfd->sections; subsection != NULL; subsection = subsection->next) { if (!som_is_subspace (subsection) || !som_is_container (section, subsection) || (subsection->flags & SEC_ALLOC) == 0) continue; /* If this is the first subspace in the space, and we are building an executable, then take care to make sure all the alignments are correct and update the exec header. */ if (first_subspace && (abfd->flags & EXEC_P)) { /* Demand paged executables have each space aligned to a page boundary. Sharable executables (write-protected text) have just the private (aka data & bss) space aligned to a page boundary. Ugh. Not true for HPUX. The HPUX kernel requires the text to always be page aligned within the file regardless of the executable's type. */ if (abfd->flags & D_PAGED || (subsection->flags & SEC_CODE) || ((abfd->flags & WP_TEXT) && (subsection->flags & SEC_DATA))) current_offset = SOM_ALIGN (current_offset, PA_PAGESIZE); /* Update the exec header. */ if (subsection->flags & SEC_CODE && exec_header.exec_tfile == 0) { exec_header.exec_tmem = section->vma; exec_header.exec_tfile = current_offset; } if (subsection->flags & SEC_DATA && exec_header.exec_dfile == 0) { exec_header.exec_dmem = section->vma; exec_header.exec_dfile = current_offset; } /* Only do this for the first subspace within each space. */ first_subspace = 0; } else if (abfd->flags & EXEC_P) { /* Have to keep proper alignments for the subspaces in executables too! */ if (subsection->flags & SEC_CODE) { unsigned tmp = exec_header.exec_tsize; tmp = SOM_ALIGN (tmp, 1 << subsection->alignment_power); current_offset += (tmp - exec_header.exec_tsize); exec_header.exec_tsize = tmp; } else { unsigned tmp = exec_header.exec_dsize; tmp = SOM_ALIGN (tmp, 1 << subsection->alignment_power); current_offset += (tmp - exec_header.exec_dsize); exec_header.exec_dsize = tmp; } } subsection->target_index = total_subspaces++; /* This is real data to be loaded from the file. */ if (subsection->flags & SEC_LOAD) { /* Update the size of the code & data. */ if (abfd->flags & EXEC_P && subsection->flags & SEC_CODE) exec_header.exec_tsize += subsection->_cooked_size; else if (abfd->flags & EXEC_P && subsection->flags & SEC_DATA) exec_header.exec_dsize += subsection->_cooked_size; som_section_data (subsection)->subspace_dict->file_loc_init_value = current_offset; section->filepos = current_offset; current_offset += bfd_section_size (abfd, subsection); } /* Looks like uninitialized data. */ else { /* Update the size of the bss section. */ if (abfd->flags & EXEC_P) exec_header.exec_bsize += subsection->_cooked_size; som_section_data (subsection)->subspace_dict->file_loc_init_value = 0; som_section_data (subsection)->subspace_dict-> initialization_length = 0; } } /* Goto the next section. */ section = section->next; } /* Finally compute the file positions for unloadable subspaces. If building an executable, start the unloadable stuff on its own page. */ if (abfd->flags & EXEC_P) current_offset = SOM_ALIGN (current_offset, PA_PAGESIZE); obj_som_file_hdr (abfd)->unloadable_sp_location = current_offset; section = abfd->sections; for (i = 0; i < num_spaces; i++) { asection *subsection; /* Find a space. */ while (!som_is_space (section)) section = section->next; if (abfd->flags & EXEC_P) current_offset = SOM_ALIGN (current_offset, PA_PAGESIZE); /* Now look for all its subspaces. */ for (subsection = abfd->sections; subsection != NULL; subsection = subsection->next) { if (!som_is_subspace (subsection) || !som_is_container (section, subsection) || (subsection->flags & SEC_ALLOC) != 0) continue; subsection->target_index = total_subspaces; /* This is real data to be loaded from the file. */ if ((subsection->flags & SEC_LOAD) == 0) { som_section_data (subsection)->subspace_dict->file_loc_init_value = current_offset; section->filepos = current_offset; current_offset += bfd_section_size (abfd, subsection); } /* Looks like uninitialized data. */ else { som_section_data (subsection)->subspace_dict->file_loc_init_value = 0; som_section_data (subsection)->subspace_dict-> initialization_length = bfd_section_size (abfd, subsection); } } /* Goto the next section. */ section = section->next; } /* If building an executable, then make sure to seek to and write one byte at the end of the file to make sure any necessary zeros are filled in. Ugh. */ if (abfd->flags & EXEC_P) current_offset = SOM_ALIGN (current_offset, PA_PAGESIZE); if (bfd_seek (abfd, current_offset - 1, SEEK_SET) < 0) return false; if (bfd_write ((PTR) "", 1, 1, abfd) != 1) return false; obj_som_file_hdr (abfd)->unloadable_sp_size = current_offset - obj_som_file_hdr (abfd)->unloadable_sp_location; /* Loader fixups are not supported in any way shape or form. */ obj_som_file_hdr (abfd)->loader_fixup_location = 0; obj_som_file_hdr (abfd)->loader_fixup_total = 0; /* Done. Store the total size of the SOM. */ obj_som_file_hdr (abfd)->som_length = current_offset; /* Now write the exec header. */ if (abfd->flags & EXEC_P) { long tmp; exec_header.exec_entry = bfd_get_start_address (abfd); exec_header.exec_flags = obj_som_exec_data (abfd)->exec_flags; /* Oh joys. Ram some of the BSS data into the DATA section to be compatable with how the hp linker makes objects (saves memory space). */ tmp = exec_header.exec_dsize; tmp = SOM_ALIGN (tmp, PA_PAGESIZE); exec_header.exec_bsize -= (tmp - exec_header.exec_dsize); if (exec_header.exec_bsize < 0) exec_header.exec_bsize = 0; exec_header.exec_dsize = tmp; if (bfd_seek (abfd, obj_som_file_hdr (abfd)->aux_header_location, SEEK_SET) < 0) return false; if (bfd_write ((PTR) &exec_header, AUX_HDR_SIZE, 1, abfd) != AUX_HDR_SIZE) return false; } return true; } /* Finally, scribble out the various headers to the disk. */ static boolean som_write_headers (abfd) bfd *abfd; { int num_spaces = som_count_spaces (abfd); int i; int subspace_index = 0; file_ptr location; asection *section; /* Subspaces are written first so that we can set up information about them in their containing spaces as the subspace is written. */ /* Seek to the start of the subspace dictionary records. */ location = obj_som_file_hdr (abfd)->subspace_location; if (bfd_seek (abfd, location, SEEK_SET) < 0) return false; section = abfd->sections; /* Now for each loadable space write out records for its subspaces. */ for (i = 0; i < num_spaces; i++) { asection *subsection; /* Find a space. */ while (!som_is_space (section)) section = section->next; /* Now look for all its subspaces. */ for (subsection = abfd->sections; subsection != NULL; subsection = subsection->next) { /* Skip any section which does not correspond to a space or subspace. Or does not have SEC_ALLOC set (and therefore has no real bits on the disk). */ if (!som_is_subspace (subsection) || !som_is_container (section, subsection) || (subsection->flags & SEC_ALLOC) == 0) continue; /* If this is the first subspace for this space, then save the index of the subspace in its containing space. Also set "is_loadable" in the containing space. */ if (som_section_data (section)->space_dict->subspace_quantity == 0) { som_section_data (section)->space_dict->is_loadable = 1; som_section_data (section)->space_dict->subspace_index = subspace_index; } /* Increment the number of subspaces seen and the number of subspaces contained within the current space. */ subspace_index++; som_section_data (section)->space_dict->subspace_quantity++; /* Mark the index of the current space within the subspace's dictionary record. */ som_section_data (subsection)->subspace_dict->space_index = i; /* Dump the current subspace header. */ if (bfd_write ((PTR) som_section_data (subsection)->subspace_dict, sizeof (struct subspace_dictionary_record), 1, abfd) != sizeof (struct subspace_dictionary_record)) return false; } /* Goto the next section. */ section = section->next; } /* Now repeat the process for unloadable subspaces. */ section = abfd->sections; /* Now for each space write out records for its subspaces. */ for (i = 0; i < num_spaces; i++) { asection *subsection; /* Find a space. */ while (!som_is_space (section)) section = section->next; /* Now look for all its subspaces. */ for (subsection = abfd->sections; subsection != NULL; subsection = subsection->next) { /* Skip any section which does not correspond to a space or subspace, or which SEC_ALLOC set (and therefore handled in the loadable spaces/subspaces code above). */ if (!som_is_subspace (subsection) || !som_is_container (section, subsection) || (subsection->flags & SEC_ALLOC) != 0) continue; /* If this is the first subspace for this space, then save the index of the subspace in its containing space. Clear "is_loadable". */ if (som_section_data (section)->space_dict->subspace_quantity == 0) { som_section_data (section)->space_dict->is_loadable = 0; som_section_data (section)->space_dict->subspace_index = subspace_index; } /* Increment the number of subspaces seen and the number of subspaces contained within the current space. */ som_section_data (section)->space_dict->subspace_quantity++; subspace_index++; /* Mark the index of the current space within the subspace's dictionary record. */ som_section_data (subsection)->subspace_dict->space_index = i; /* Dump this subspace header. */ if (bfd_write ((PTR) som_section_data (subsection)->subspace_dict, sizeof (struct subspace_dictionary_record), 1, abfd) != sizeof (struct subspace_dictionary_record)) return false; } /* Goto the next section. */ section = section->next; } /* All the subspace dictiondary records are written, and all the fields are set up in the space dictionary records. Seek to the right location and start writing the space dictionary records. */ location = obj_som_file_hdr (abfd)->space_location; if (bfd_seek (abfd, location, SEEK_SET) < 0) return false; section = abfd->sections; for (i = 0; i < num_spaces; i++) { /* Find a space. */ while (!som_is_space (section)) section = section->next; /* Dump its header */ if (bfd_write ((PTR) som_section_data (section)->space_dict, sizeof (struct space_dictionary_record), 1, abfd) != sizeof (struct space_dictionary_record)) return false; /* Goto the next section. */ section = section->next; } /* Only thing left to do is write out the file header. It is always at location zero. Seek there and write it. */ if (bfd_seek (abfd, (file_ptr) 0, SEEK_SET) < 0) return false; if (bfd_write ((PTR) obj_som_file_hdr (abfd), sizeof (struct header), 1, abfd) != sizeof (struct header)) return false; return true; } /* Compute and return the checksum for a SOM file header. */ static unsigned long som_compute_checksum (abfd) bfd *abfd; { unsigned long checksum, count, i; unsigned long *buffer = (unsigned long *) obj_som_file_hdr (abfd); checksum = 0; count = sizeof (struct header) / sizeof (unsigned long); for (i = 0; i < count; i++) checksum ^= *(buffer + i); return checksum; } static void som_bfd_derive_misc_symbol_info (abfd, sym, info) bfd *abfd; asymbol *sym; struct som_misc_symbol_info *info; { /* Initialize. */ memset (info, 0, sizeof (struct som_misc_symbol_info)); /* The HP SOM linker requires detailed type information about all symbols (including undefined symbols!). Unfortunately, the type specified in an import/export statement does not always match what the linker wants. Severe braindamage. */ /* Section symbols will not have a SOM symbol type assigned to them yet. Assign all section symbols type ST_DATA. */ if (sym->flags & BSF_SECTION_SYM) info->symbol_type = ST_DATA; else { /* Common symbols must have scope SS_UNSAT and type ST_STORAGE or the linker will choke. */ if (sym->section == &bfd_com_section) { info->symbol_scope = SS_UNSAT; info->symbol_type = ST_STORAGE; } /* It is possible to have a symbol without an associated type. This happens if the user imported the symbol without a type and the symbol was never defined locally. If BSF_FUNCTION is set for this symbol, then assign it type ST_CODE (the HP linker requires undefined external functions to have type ST_CODE rather than ST_ENTRY). */ else if (som_symbol_data (sym)->som_type == SYMBOL_TYPE_UNKNOWN && sym->section == &bfd_und_section && sym->flags & BSF_FUNCTION) info->symbol_type = ST_CODE; /* Handle function symbols which were defined in this file. They should have type ST_ENTRY. Also retrieve the argument relocation bits from the SOM backend information. */ else if (som_symbol_data (sym)->som_type == SYMBOL_TYPE_ENTRY || (som_symbol_data (sym)->som_type == SYMBOL_TYPE_CODE && (sym->flags & BSF_FUNCTION)) || (som_symbol_data (sym)->som_type == SYMBOL_TYPE_UNKNOWN && (sym->flags & BSF_FUNCTION))) { info->symbol_type = ST_ENTRY; info->arg_reloc = som_symbol_data (sym)->tc_data.hppa_arg_reloc; } /* If the type is unknown at this point, it should be ST_DATA (functions were handled as special cases above). */ else if (som_symbol_data (sym)->som_type == SYMBOL_TYPE_UNKNOWN) info->symbol_type = ST_DATA; /* From now on it's a very simple mapping. */ else if (som_symbol_data (sym)->som_type == SYMBOL_TYPE_ABSOLUTE) info->symbol_type = ST_ABSOLUTE; else if (som_symbol_data (sym)->som_type == SYMBOL_TYPE_CODE) info->symbol_type = ST_CODE; else if (som_symbol_data (sym)->som_type == SYMBOL_TYPE_DATA) info->symbol_type = ST_DATA; else if (som_symbol_data (sym)->som_type == SYMBOL_TYPE_MILLICODE) info->symbol_type = ST_MILLICODE; else if (som_symbol_data (sym)->som_type == SYMBOL_TYPE_PLABEL) info->symbol_type = ST_PLABEL; else if (som_symbol_data (sym)->som_type == SYMBOL_TYPE_PRI_PROG) info->symbol_type = ST_PRI_PROG; else if (som_symbol_data (sym)->som_type == SYMBOL_TYPE_SEC_PROG) info->symbol_type = ST_SEC_PROG; } /* Now handle the symbol's scope. Exported data which is not in the common section has scope SS_UNIVERSAL. Note scope of common symbols was handled earlier! */ if (sym->flags & BSF_EXPORT && sym->section != &bfd_com_section) info->symbol_scope = SS_UNIVERSAL; /* Any undefined symbol at this point has a scope SS_UNSAT. */ else if (sym->section == &bfd_und_section) info->symbol_scope = SS_UNSAT; /* Anything else which is not in the common section has scope SS_LOCAL. */ else if (sym->section != &bfd_com_section) info->symbol_scope = SS_LOCAL; /* Now set the symbol_info field. It has no real meaning for undefined or common symbols, but the HP linker will choke if it's not set to some "reasonable" value. We use zero as a reasonable value. */ if (sym->section == &bfd_com_section || sym->section == &bfd_und_section || sym->section == &bfd_abs_section) info->symbol_info = 0; /* For all other symbols, the symbol_info field contains the subspace index of the space this symbol is contained in. */ else info->symbol_info = sym->section->target_index; /* Set the symbol's value. */ info->symbol_value = sym->value + sym->section->vma; } /* Build and write, in one big chunk, the entire symbol table for this BFD. */ static boolean som_build_and_write_symbol_table (abfd) bfd *abfd; { unsigned int num_syms = bfd_get_symcount (abfd); file_ptr symtab_location = obj_som_file_hdr (abfd)->symbol_location; asymbol **bfd_syms = bfd_get_outsymbols (abfd); struct symbol_dictionary_record *som_symtab = NULL; int i, symtab_size; /* Compute total symbol table size and allocate a chunk of memory to hold the symbol table as we build it. */ symtab_size = num_syms * sizeof (struct symbol_dictionary_record); som_symtab = (struct symbol_dictionary_record *) malloc (symtab_size); if (som_symtab == NULL && symtab_size != 0) { bfd_set_error (bfd_error_no_memory); goto error_return; } memset (som_symtab, 0, symtab_size); /* Walk over each symbol. */ for (i = 0; i < num_syms; i++) { struct som_misc_symbol_info info; /* This is really an index into the symbol strings table. By the time we get here, the index has already been computed and stored into the name field in the BFD symbol. */ som_symtab[i].name.n_strx = (int) bfd_syms[i]->name; /* Derive SOM information from the BFD symbol. */ som_bfd_derive_misc_symbol_info (abfd, bfd_syms[i], &info); /* Now use it. */ som_symtab[i].symbol_type = info.symbol_type; som_symtab[i].symbol_scope = info.symbol_scope; som_symtab[i].arg_reloc = info.arg_reloc; som_symtab[i].symbol_info = info.symbol_info; som_symtab[i].symbol_value = info.symbol_value; } /* Everything is ready, seek to the right location and scribble out the symbol table. */ if (bfd_seek (abfd, symtab_location, SEEK_SET) != 0) return false; if (bfd_write ((PTR) som_symtab, symtab_size, 1, abfd) != symtab_size) goto error_return; if (som_symtab != NULL) free (som_symtab); return true; error_return: if (som_symtab != NULL) free (som_symtab); return false; } /* Write an object in SOM format. */ static boolean som_write_object_contents (abfd) bfd *abfd; { if (abfd->output_has_begun == false) { /* Set up fixed parts of the file, space, and subspace headers. Notify the world that output has begun. */ som_prep_headers (abfd); abfd->output_has_begun = true; /* Start writing the object file. This include all the string tables, fixup streams, and other portions of the object file. */ som_begin_writing (abfd); } /* Now that the symbol table information is complete, build and write the symbol table. */ if (som_build_and_write_symbol_table (abfd) == false) return false; /* Compute the checksum for the file header just before writing the header to disk. */ obj_som_file_hdr (abfd)->checksum = som_compute_checksum (abfd); return (som_write_headers (abfd)); } /* Read and save the string table associated with the given BFD. */ static boolean som_slurp_string_table (abfd) bfd *abfd; { char *stringtab; /* Use the saved version if its available. */ if (obj_som_stringtab (abfd) != NULL) return true; /* Allocate and read in the string table. */ stringtab = bfd_zalloc (abfd, obj_som_stringtab_size (abfd)); if (stringtab == NULL) { bfd_set_error (bfd_error_no_memory); return false; } if (bfd_seek (abfd, obj_som_str_filepos (abfd), SEEK_SET) < 0) return false; if (bfd_read (stringtab, obj_som_stringtab_size (abfd), 1, abfd) != obj_som_stringtab_size (abfd)) return false; /* Save our results and return success. */ obj_som_stringtab (abfd) = stringtab; return true; } /* Return the amount of data (in bytes) required to hold the symbol table for this object. */ static unsigned int som_get_symtab_upper_bound (abfd) bfd *abfd; { if (!som_slurp_symbol_table (abfd)) return 0; return (bfd_get_symcount (abfd) + 1) * (sizeof (asymbol *)); } /* Convert from a SOM subspace index to a BFD section. */ static asection * bfd_section_from_som_symbol (abfd, symbol) bfd *abfd; struct symbol_dictionary_record *symbol; { asection *section; /* The meaning of the symbol_info field changes for functions within executables. So only use the quick symbol_info mapping for incomplete objects and non-function symbols in executables. */ if ((abfd->flags & EXEC_P) == 0 || (symbol->symbol_type != ST_ENTRY && symbol->symbol_type != ST_PRI_PROG && symbol->symbol_type != ST_SEC_PROG && symbol->symbol_type != ST_MILLICODE)) { unsigned int index = symbol->symbol_info; for (section = abfd->sections; section != NULL; section = section->next) if (section->target_index == index) return section; /* Should never happen. */ abort(); } else { unsigned int value = symbol->symbol_value; unsigned int found = 0; /* For executables we will have to use the symbol's address and find out what section would contain that address. Yuk. */ for (section = abfd->sections; section; section = section->next) { if (value >= section->vma && value <= section->vma + section->_cooked_size) return section; } /* Should never happen. */ abort (); } } /* Read and save the symbol table associated with the given BFD. */ static unsigned int som_slurp_symbol_table (abfd) bfd *abfd; { int symbol_count = bfd_get_symcount (abfd); int symsize = sizeof (struct symbol_dictionary_record); char *stringtab; struct symbol_dictionary_record *buf = NULL, *bufp, *endbufp; som_symbol_type *sym, *symbase; /* Return saved value if it exists. */ if (obj_som_symtab (abfd) != NULL) goto successful_return; /* Special case. This is *not* an error. */ if (symbol_count == 0) goto successful_return; if (!som_slurp_string_table (abfd)) goto error_return; stringtab = obj_som_stringtab (abfd); symbase = (som_symbol_type *) bfd_zalloc (abfd, symbol_count * sizeof (som_symbol_type)); if (symbase == NULL) { bfd_set_error (bfd_error_no_memory); goto error_return; } /* Read in the external SOM representation. */ buf = malloc (symbol_count * symsize); if (buf == NULL && symbol_count * symsize != 0) { bfd_set_error (bfd_error_no_memory); goto error_return; } if (bfd_seek (abfd, obj_som_sym_filepos (abfd), SEEK_SET) < 0) goto error_return; if (bfd_read (buf, symbol_count * symsize, 1, abfd) != symbol_count * symsize) goto error_return; /* Iterate over all the symbols and internalize them. */ endbufp = buf + symbol_count; for (bufp = buf, sym = symbase; bufp < endbufp; ++bufp) { /* I don't think we care about these. */ if (bufp->symbol_type == ST_SYM_EXT || bufp->symbol_type == ST_ARG_EXT) continue; /* Set some private data we care about. */ if (bufp->symbol_type == ST_NULL) som_symbol_data (sym)->som_type = SYMBOL_TYPE_UNKNOWN; else if (bufp->symbol_type == ST_ABSOLUTE) som_symbol_data (sym)->som_type = SYMBOL_TYPE_ABSOLUTE; else if (bufp->symbol_type == ST_DATA) som_symbol_data (sym)->som_type = SYMBOL_TYPE_DATA; else if (bufp->symbol_type == ST_CODE) som_symbol_data (sym)->som_type = SYMBOL_TYPE_CODE; else if (bufp->symbol_type == ST_PRI_PROG) som_symbol_data (sym)->som_type = SYMBOL_TYPE_PRI_PROG; else if (bufp->symbol_type == ST_SEC_PROG) som_symbol_data (sym)->som_type = SYMBOL_TYPE_SEC_PROG; else if (bufp->symbol_type == ST_ENTRY) som_symbol_data (sym)->som_type = SYMBOL_TYPE_ENTRY; else if (bufp->symbol_type == ST_MILLICODE) som_symbol_data (sym)->som_type = SYMBOL_TYPE_MILLICODE; else if (bufp->symbol_type == ST_PLABEL) som_symbol_data (sym)->som_type = SYMBOL_TYPE_PLABEL; else som_symbol_data (sym)->som_type = SYMBOL_TYPE_UNKNOWN; som_symbol_data (sym)->tc_data.hppa_arg_reloc = bufp->arg_reloc; /* Some reasonable defaults. */ sym->symbol.the_bfd = abfd; sym->symbol.name = bufp->name.n_strx + stringtab; sym->symbol.value = bufp->symbol_value; sym->symbol.section = 0; sym->symbol.flags = 0; switch (bufp->symbol_type) { case ST_ENTRY: case ST_PRI_PROG: case ST_SEC_PROG: case ST_MILLICODE: sym->symbol.flags |= BSF_FUNCTION; sym->symbol.value &= ~0x3; break; case ST_STUB: case ST_CODE: sym->symbol.value &= ~0x3; default: break; } /* Handle scoping and section information. */ switch (bufp->symbol_scope) { /* symbol_info field is undefined for SS_EXTERNAL and SS_UNSAT symbols, so the section associated with this symbol can't be known. */ case SS_EXTERNAL: if (bufp->symbol_type != ST_STORAGE) sym->symbol.section = &bfd_und_section; else sym->symbol.section = &bfd_com_section; sym->symbol.flags |= (BSF_EXPORT | BSF_GLOBAL); break; case SS_UNSAT: if (bufp->symbol_type != ST_STORAGE) sym->symbol.section = &bfd_und_section; else sym->symbol.section = &bfd_com_section; break; case SS_UNIVERSAL: sym->symbol.flags |= (BSF_EXPORT | BSF_GLOBAL); sym->symbol.section = bfd_section_from_som_symbol (abfd, bufp); sym->symbol.value -= sym->symbol.section->vma; break; #if 0 /* SS_GLOBAL and SS_LOCAL are two names for the same thing. Sound dumb? It is. */ case SS_GLOBAL: #endif case SS_LOCAL: sym->symbol.flags |= BSF_LOCAL; sym->symbol.section = bfd_section_from_som_symbol (abfd, bufp); sym->symbol.value -= sym->symbol.section->vma; break; } /* Mark section symbols and symbols used by the debugger. */ if (sym->symbol.name[0] == '$' && sym->symbol.name[strlen (sym->symbol.name) - 1] == '$') sym->symbol.flags |= BSF_SECTION_SYM; else if (!strncmp (sym->symbol.name, "L$0\002", 4)) { sym->symbol.flags |= BSF_SECTION_SYM; sym->symbol.name = sym->symbol.section->name; } else if (!strncmp (sym->symbol.name, "L$0\001", 4)) sym->symbol.flags |= BSF_DEBUGGING; /* Note increment at bottom of loop, since we skip some symbols we can not include it as part of the for statement. */ sym++; } /* Save our results and return success. */ obj_som_symtab (abfd) = symbase; successful_return: if (buf != NULL) free (buf); return (true); error_return: if (buf != NULL) free (buf); return false; } /* Canonicalize a SOM symbol table. Return the number of entries in the symbol table. */ static unsigned int som_get_symtab (abfd, location) bfd *abfd; asymbol **location; { int i; som_symbol_type *symbase; if (!som_slurp_symbol_table (abfd)) return 0; i = bfd_get_symcount (abfd); symbase = obj_som_symtab (abfd); for (; i > 0; i--, location++, symbase++) *location = &symbase->symbol; /* Final null pointer. */ *location = 0; return (bfd_get_symcount (abfd)); } /* Make a SOM symbol. There is nothing special to do here. */ static asymbol * som_make_empty_symbol (abfd) bfd *abfd; { som_symbol_type *new = (som_symbol_type *) bfd_zalloc (abfd, sizeof (som_symbol_type)); if (new == NULL) { bfd_set_error (bfd_error_no_memory); return 0; } new->symbol.the_bfd = abfd; return &new->symbol; } /* Print symbol information. */ static void som_print_symbol (ignore_abfd, afile, symbol, how) bfd *ignore_abfd; PTR afile; asymbol *symbol; bfd_print_symbol_type how; { FILE *file = (FILE *) afile; switch (how) { case bfd_print_symbol_name: fprintf (file, "%s", symbol->name); break; case bfd_print_symbol_more: fprintf (file, "som "); fprintf_vma (file, symbol->value); fprintf (file, " %lx", (long) symbol->flags); break; case bfd_print_symbol_all: { CONST char *section_name; section_name = symbol->section ? symbol->section->name : "(*none*)"; bfd_print_symbol_vandf ((PTR) file, symbol); fprintf (file, " %s\t%s", section_name, symbol->name); break; } } } static boolean som_bfd_is_local_label (abfd, sym) bfd *abfd; asymbol *sym; { return (sym->name[0] == 'L' && sym->name[1] == '$'); } /* Count or process variable-length SOM fixup records. To avoid code duplication we use this code both to compute the number of relocations requested by a stream, and to internalize the stream. When computing the number of relocations requested by a stream the variables rptr, section, and symbols have no meaning. Return the number of relocations requested by the fixup stream. When not just counting This needs at least two or three more passes to get it cleaned up. */ static unsigned int som_set_reloc_info (fixup, end, internal_relocs, section, symbols, just_count) unsigned char *fixup; unsigned int end; arelent *internal_relocs; asection *section; asymbol **symbols; boolean just_count; { unsigned int op, varname; unsigned char *end_fixups = &fixup[end]; const struct fixup_format *fp; char *cp; unsigned char *save_fixup; int variables[26], stack[20], c, v, count, prev_fixup, *sp; const int *subop; arelent *rptr= internal_relocs; unsigned int offset = just_count ? 0 : section->vma; #define var(c) variables[(c) - 'A'] #define push(v) (*sp++ = (v)) #define pop() (*--sp) #define emptystack() (sp == stack) som_initialize_reloc_queue (reloc_queue); memset (variables, 0, sizeof (variables)); memset (stack, 0, sizeof (stack)); count = 0; prev_fixup = 0; sp = stack; while (fixup < end_fixups) { /* Save pointer to the start of this fixup. We'll use it later to determine if it is necessary to put this fixup on the queue. */ save_fixup = fixup; /* Get the fixup code and its associated format. */ op = *fixup++; fp = &som_fixup_formats[op]; /* Handle a request for a previous fixup. */ if (*fp->format == 'P') { /* Get pointer to the beginning of the prev fixup, move the repeated fixup to the head of the queue. */ fixup = reloc_queue[fp->D].reloc; som_reloc_queue_fix (reloc_queue, fp->D); prev_fixup = 1; /* Get the fixup code and its associated format. */ op = *fixup++; fp = &som_fixup_formats[op]; } /* If we are not just counting, set some reasonable defaults. */ if (! just_count) { rptr->address = offset; rptr->howto = &som_hppa_howto_table[op]; rptr->addend = 0; rptr->sym_ptr_ptr = bfd_abs_section.symbol_ptr_ptr; } /* Set default input length to 0. Get the opcode class index into D. */ var ('L') = 0; var ('D') = fp->D; /* Get the opcode format. */ cp = fp->format; /* Process the format string. Parsing happens in two phases, parse RHS, then assign to LHS. Repeat until no more characters in the format string. */ while (*cp) { /* The variable this pass is going to compute a value for. */ varname = *cp++; /* Start processing RHS. Continue until a NULL or '=' is found. */ do { c = *cp++; /* If this is a variable, push it on the stack. */ if (isupper (c)) push (var (c)); /* If this is a lower case letter, then it represents additional data from the fixup stream to be pushed onto the stack. */ else if (islower (c)) { for (v = 0; c > 'a'; --c) v = (v << 8) | *fixup++; push (v); } /* A decimal constant. Push it on the stack. */ else if (isdigit (c)) { v = c - '0'; while (isdigit (*cp)) v = (v * 10) + (*cp++ - '0'); push (v); } else /* An operator. Pop two two values from the stack and use them as operands to the given operation. Push the result of the operation back on the stack. */ switch (c) { case '+': v = pop (); v += pop (); push (v); break; case '*': v = pop (); v *= pop (); push (v); break; case '<': v = pop (); v = pop () << v; push (v); break; default: abort (); } } while (*cp && *cp != '='); /* Move over the equal operator. */ cp++; /* Pop the RHS off the stack. */ c = pop (); /* Perform the assignment. */ var (varname) = c; /* Handle side effects. and special 'O' stack cases. */ switch (varname) { /* Consume some bytes from the input space. */ case 'L': offset += c; break; /* A symbol to use in the relocation. Make a note of this if we are not just counting. */ case 'S': if (! just_count) rptr->sym_ptr_ptr = &symbols[c]; break; /* Handle the linker expression stack. */ case 'O': switch (op) { case R_COMP1: subop = comp1_opcodes; break; case R_COMP2: subop = comp2_opcodes; break; case R_COMP3: subop = comp3_opcodes; break; default: abort (); } while (*subop <= (unsigned char) c) ++subop; --subop; break; default: break; } } /* If we used a previous fixup, clean up after it. */ if (prev_fixup) { fixup = save_fixup + 1; prev_fixup = 0; } /* Queue it. */ else if (fixup > save_fixup + 1) som_reloc_queue_insert (save_fixup, fixup - save_fixup, reloc_queue); /* We do not pass R_DATA_OVERRIDE or R_NO_RELOCATION fixups to BFD. */ if (som_hppa_howto_table[op].type != R_DATA_OVERRIDE && som_hppa_howto_table[op].type != R_NO_RELOCATION) { /* Done with a single reloction. Loop back to the top. */ if (! just_count) { rptr->addend = var ('V'); rptr++; } count++; /* Now that we've handled a "full" relocation, reset some state. */ memset (variables, 0, sizeof (variables)); memset (stack, 0, sizeof (stack)); } } return count; #undef var #undef push #undef pop #undef emptystack } /* Read in the relocs (aka fixups in SOM terms) for a section. som_get_reloc_upper_bound calls this routine with JUST_COUNT set to true to indicate it only needs a count of the number of actual relocations. */ static boolean som_slurp_reloc_table (abfd, section, symbols, just_count) bfd *abfd; asection *section; asymbol **symbols; boolean just_count; { char *external_relocs; unsigned int fixup_stream_size; arelent *internal_relocs; unsigned int num_relocs; fixup_stream_size = som_section_data (section)->reloc_size; /* If there were no relocations, then there is nothing to do. */ if (section->reloc_count == 0) return true; /* If reloc_count is -1, then the relocation stream has not been parsed. We must do so now to know how many relocations exist. */ if (section->reloc_count == -1) { external_relocs = (char *) bfd_zalloc (abfd, fixup_stream_size); if (external_relocs == (char *) NULL) { bfd_set_error (bfd_error_no_memory); return false; } /* Read in the external forms. */ if (bfd_seek (abfd, obj_som_reloc_filepos (abfd) + section->rel_filepos, SEEK_SET) != 0) return false; if (bfd_read (external_relocs, 1, fixup_stream_size, abfd) != fixup_stream_size) return false; /* Let callers know how many relocations found. also save the relocation stream as we will need it again. */ section->reloc_count = som_set_reloc_info (external_relocs, fixup_stream_size, NULL, NULL, NULL, true); som_section_data (section)->reloc_stream = external_relocs; } /* If the caller only wanted a count, then return now. */ if (just_count) return true; num_relocs = section->reloc_count; external_relocs = som_section_data (section)->reloc_stream; /* Return saved information about the relocations if it is available. */ if (section->relocation != (arelent *) NULL) return true; internal_relocs = (arelent *) bfd_zalloc (abfd, num_relocs * sizeof (arelent)); if (internal_relocs == (arelent *) NULL) { bfd_set_error (bfd_error_no_memory); return false; } /* Process and internalize the relocations. */ som_set_reloc_info (external_relocs, fixup_stream_size, internal_relocs, section, symbols, false); /* Save our results and return success. */ section->relocation = internal_relocs; return (true); } /* Return the number of bytes required to store the relocation information associated with the given section. */ static unsigned int som_get_reloc_upper_bound (abfd, asect) bfd *abfd; sec_ptr asect; { /* If section has relocations, then read in the relocation stream and parse it to determine how many relocations exist. */ if (asect->flags & SEC_RELOC) { if (som_slurp_reloc_table (abfd, asect, NULL, true)) return (asect->reloc_count + 1) * sizeof (arelent); } /* Either there are no relocations or an error occurred while reading and parsing the relocation stream. */ return 0; } /* Convert relocations from SOM (external) form into BFD internal form. Return the number of relocations. */ static unsigned int som_canonicalize_reloc (abfd, section, relptr, symbols) bfd *abfd; sec_ptr section; arelent **relptr; asymbol **symbols; { arelent *tblptr; int count; if (som_slurp_reloc_table (abfd, section, symbols, false) == false) return 0; count = section->reloc_count; tblptr = section->relocation; if (tblptr == (arelent *) NULL) return 0; while (count--) *relptr++ = tblptr++; *relptr = (arelent *) NULL; return section->reloc_count; } extern bfd_target som_vec; /* A hook to set up object file dependent section information. */ static boolean som_new_section_hook (abfd, newsect) bfd *abfd; asection *newsect; { newsect->used_by_bfd = (PTR) bfd_zalloc (abfd, sizeof (struct som_section_data_struct)); if (!newsect->used_by_bfd) { bfd_set_error (bfd_error_no_memory); return false; } newsect->alignment_power = 3; /* We allow more than three sections internally */ return true; } /* Copy any private info we understand from the input section to the output section. */ static boolean som_bfd_copy_private_section_data (ibfd, isection, obfd, osection) bfd *ibfd; asection *isection; bfd *obfd; asection *osection; { /* One day we may try to grok other private data. */ if (ibfd->xvec->flavour != bfd_target_som_flavour || obfd->xvec->flavour != bfd_target_som_flavour || (!som_is_space (isection) && !som_is_subspace (isection))) return false; som_section_data (osection)->copy_data = (struct som_copyable_section_data_struct *) bfd_zalloc (obfd, sizeof (struct som_copyable_section_data_struct)); if (som_section_data (osection)->copy_data == NULL) { bfd_set_error (bfd_error_no_memory); return false; } memcpy (som_section_data (osection)->copy_data, som_section_data (isection)->copy_data, sizeof (struct som_copyable_section_data_struct)); /* Reparent if necessary. */ if (som_section_data (osection)->copy_data->container) som_section_data (osection)->copy_data->container = som_section_data (osection)->copy_data->container->output_section; return true; } /* Copy any private info we understand from the input bfd to the output bfd. */ static boolean som_bfd_copy_private_bfd_data (ibfd, obfd) bfd *ibfd, *obfd; { /* One day we may try to grok other private data. */ if (ibfd->xvec->flavour != bfd_target_som_flavour || obfd->xvec->flavour != bfd_target_som_flavour) return false; /* Allocate some memory to hold the data we need. */ obj_som_exec_data (obfd) = (struct som_exec_data *) bfd_zalloc (obfd, sizeof (struct som_exec_data)); if (obj_som_exec_data (obfd) == NULL) { bfd_set_error (bfd_error_no_memory); return false; } /* Now copy the data. */ memcpy (obj_som_exec_data (obfd), obj_som_exec_data (ibfd), sizeof (struct som_exec_data)); return true; } /* Set backend info for sections which can not be described in the BFD data structures. */ boolean bfd_som_set_section_attributes (section, defined, private, sort_key, spnum) asection *section; int defined; int private; unsigned int sort_key; int spnum; { /* Allocate memory to hold the magic information. */ if (som_section_data (section)->copy_data == NULL) { som_section_data (section)->copy_data = (struct som_copyable_section_data_struct *) bfd_zalloc (section->owner, sizeof (struct som_copyable_section_data_struct)); if (som_section_data (section)->copy_data == NULL) { bfd_set_error (bfd_error_no_memory); return false; } } som_section_data (section)->copy_data->sort_key = sort_key; som_section_data (section)->copy_data->is_defined = defined; som_section_data (section)->copy_data->is_private = private; som_section_data (section)->copy_data->container = section; section->target_index = spnum; return true; } /* Set backend info for subsections which can not be described in the BFD data structures. */ boolean bfd_som_set_subsection_attributes (section, container, access, sort_key, quadrant) asection *section; asection *container; int access; unsigned int sort_key; int quadrant; { /* Allocate memory to hold the magic information. */ if (som_section_data (section)->copy_data == NULL) { som_section_data (section)->copy_data = (struct som_copyable_section_data_struct *) bfd_zalloc (section->owner, sizeof (struct som_copyable_section_data_struct)); if (som_section_data (section)->copy_data == NULL) { bfd_set_error (bfd_error_no_memory); return false; } } som_section_data (section)->copy_data->sort_key = sort_key; som_section_data (section)->copy_data->access_control_bits = access; som_section_data (section)->copy_data->quadrant = quadrant; som_section_data (section)->copy_data->container = container; return true; } /* Set the full SOM symbol type. SOM needs far more symbol information than any other object file format I'm aware of. It is mandatory to be able to know if a symbol is an entry point, millicode, data, code, absolute, storage request, or procedure label. If you get the symbol type wrong your program will not link. */ void bfd_som_set_symbol_type (symbol, type) asymbol *symbol; unsigned int type; { som_symbol_data (symbol)->som_type = type; } /* Attach 64bits of unwind information to a symbol (which hopefully is a function of some kind!). It would be better to keep this in the R_ENTRY relocation, but there is not enough space. */ void bfd_som_attach_unwind_info (symbol, unwind_desc) asymbol *symbol; char *unwind_desc; { som_symbol_data (symbol)->unwind = unwind_desc; } /* Attach an auxiliary header to the BFD backend so that it may be written into the object file. */ boolean bfd_som_attach_aux_hdr (abfd, type, string) bfd *abfd; int type; char *string; { if (type == VERSION_AUX_ID) { int len = strlen (string); int pad = 0; if (len % 4) pad = (4 - (len % 4)); obj_som_version_hdr (abfd) = (struct user_string_aux_hdr *) bfd_zalloc (abfd, sizeof (struct aux_id) + sizeof (unsigned int) + len + pad); if (!obj_som_version_hdr (abfd)) { bfd_set_error (bfd_error_no_memory); return false; } obj_som_version_hdr (abfd)->header_id.type = VERSION_AUX_ID; obj_som_version_hdr (abfd)->header_id.length = len + pad; obj_som_version_hdr (abfd)->header_id.length += sizeof (int); obj_som_version_hdr (abfd)->string_length = len; strncpy (obj_som_version_hdr (abfd)->user_string, string, len); } else if (type == COPYRIGHT_AUX_ID) { int len = strlen (string); int pad = 0; if (len % 4) pad = (4 - (len % 4)); obj_som_copyright_hdr (abfd) = (struct copyright_aux_hdr *) bfd_zalloc (abfd, sizeof (struct aux_id) + sizeof (unsigned int) + len + pad); if (!obj_som_copyright_hdr (abfd)) { bfd_set_error (bfd_error_no_memory); return false; } obj_som_copyright_hdr (abfd)->header_id.type = COPYRIGHT_AUX_ID; obj_som_copyright_hdr (abfd)->header_id.length = len + pad; obj_som_copyright_hdr (abfd)->header_id.length += sizeof (int); obj_som_copyright_hdr (abfd)->string_length = len; strcpy (obj_som_copyright_hdr (abfd)->copyright, string); } return true; } static boolean som_get_section_contents (abfd, section, location, offset, count) bfd *abfd; sec_ptr section; PTR location; file_ptr offset; bfd_size_type count; { if (count == 0 || ((section->flags & (SEC_LOAD | SEC_DEBUGGING)) == 0)) return true; if ((bfd_size_type)(offset+count) > section->_raw_size || bfd_seek (abfd, (file_ptr)(section->filepos + offset), SEEK_SET) == -1 || bfd_read (location, (bfd_size_type)1, count, abfd) != count) return (false); /* on error */ return (true); } static boolean som_set_section_contents (abfd, section, location, offset, count) bfd *abfd; sec_ptr section; PTR location; file_ptr offset; bfd_size_type count; { if (abfd->output_has_begun == false) { /* Set up fixed parts of the file, space, and subspace headers. Notify the world that output has begun. */ som_prep_headers (abfd); abfd->output_has_begun = true; /* Start writing the object file. This include all the string tables, fixup streams, and other portions of the object file. */ som_begin_writing (abfd); } /* Only write subspaces which have "real" contents (eg. the contents are not generated at run time by the OS). */ if (!som_is_subspace (section) || ((section->flags & (SEC_LOAD | SEC_DEBUGGING)) == 0)) return true; /* Seek to the proper offset within the object file and write the data. */ offset += som_section_data (section)->subspace_dict->file_loc_init_value; if (bfd_seek (abfd, offset, SEEK_SET) == -1) return false; if (bfd_write ((PTR) location, 1, count, abfd) != count) return false; return true; } static boolean som_set_arch_mach (abfd, arch, machine) bfd *abfd; enum bfd_architecture arch; unsigned long machine; { /* Allow any architecture to be supported by the SOM backend */ return bfd_default_set_arch_mach (abfd, arch, machine); } static boolean som_find_nearest_line (abfd, section, symbols, offset, filename_ptr, functionname_ptr, line_ptr) bfd *abfd; asection *section; asymbol **symbols; bfd_vma offset; CONST char **filename_ptr; CONST char **functionname_ptr; unsigned int *line_ptr; { fprintf (stderr, "som_find_nearest_line unimplemented\n"); fflush (stderr); abort (); return (false); } static int som_sizeof_headers (abfd, reloc) bfd *abfd; boolean reloc; { fprintf (stderr, "som_sizeof_headers unimplemented\n"); fflush (stderr); abort (); return (0); } /* Return the single-character symbol type corresponding to SOM section S, or '?' for an unknown SOM section. */ static char som_section_type (s) const char *s; { const struct section_to_type *t; for (t = &stt[0]; t->section; t++) if (!strcmp (s, t->section)) return t->type; return '?'; } static int som_decode_symclass (symbol) asymbol *symbol; { char c; if (bfd_is_com_section (symbol->section)) return 'C'; if (symbol->section == &bfd_und_section) return 'U'; if (symbol->section == &bfd_ind_section) return 'I'; if (!(symbol->flags & (BSF_GLOBAL|BSF_LOCAL))) return '?'; if (symbol->section == &bfd_abs_section) c = 'a'; else if (symbol->section) c = som_section_type (symbol->section->name); else return '?'; if (symbol->flags & BSF_GLOBAL) c = toupper (c); return c; } /* Return information about SOM symbol SYMBOL in RET. */ static void som_get_symbol_info (ignore_abfd, symbol, ret) bfd *ignore_abfd; asymbol *symbol; symbol_info *ret; { ret->type = som_decode_symclass (symbol); if (ret->type != 'U') ret->value = symbol->value+symbol->section->vma; else ret->value = 0; ret->name = symbol->name; } /* Count the number of symbols in the archive symbol table. Necessary so that we can allocate space for all the carsyms at once. */ static boolean som_bfd_count_ar_symbols (abfd, lst_header, count) bfd *abfd; struct lst_header *lst_header; symindex *count; { unsigned int i; unsigned int *hash_table = NULL; file_ptr lst_filepos = bfd_tell (abfd) - sizeof (struct lst_header); hash_table = (unsigned int *) malloc (lst_header->hash_size * sizeof (unsigned int)); if (hash_table == NULL && lst_header->hash_size != 0) { bfd_set_error (bfd_error_no_memory); goto error_return; } /* Don't forget to initialize the counter! */ *count = 0; /* Read in the hash table. The has table is an array of 32bit file offsets which point to the hash chains. */ if (bfd_read ((PTR) hash_table, lst_header->hash_size, 4, abfd) != lst_header->hash_size * 4) goto error_return; /* Walk each chain counting the number of symbols found on that particular chain. */ for (i = 0; i < lst_header->hash_size; i++) { struct lst_symbol_record lst_symbol; /* An empty chain has zero as it's file offset. */ if (hash_table[i] == 0) continue; /* Seek to the first symbol in this hash chain. */ if (bfd_seek (abfd, lst_filepos + hash_table[i], SEEK_SET) < 0) goto error_return; /* Read in this symbol and update the counter. */ if (bfd_read ((PTR) & lst_symbol, 1, sizeof (lst_symbol), abfd) != sizeof (lst_symbol)) goto error_return; (*count)++; /* Now iterate through the rest of the symbols on this chain. */ while (lst_symbol.next_entry) { /* Seek to the next symbol. */ if (bfd_seek (abfd, lst_filepos + lst_symbol.next_entry, SEEK_SET) < 0) goto error_return; /* Read the symbol in and update the counter. */ if (bfd_read ((PTR) & lst_symbol, 1, sizeof (lst_symbol), abfd) != sizeof (lst_symbol)) goto error_return; (*count)++; } } if (hash_table != NULL) free (hash_table); return true; error_return: if (hash_table != NULL) free (hash_table); return false; } /* Fill in the canonical archive symbols (SYMS) from the archive described by ABFD and LST_HEADER. */ static boolean som_bfd_fill_in_ar_symbols (abfd, lst_header, syms) bfd *abfd; struct lst_header *lst_header; carsym **syms; { unsigned int i, len; carsym *set = syms[0]; unsigned int *hash_table = NULL; struct som_entry *som_dict = NULL; file_ptr lst_filepos = bfd_tell (abfd) - sizeof (struct lst_header); hash_table = (unsigned int *) malloc (lst_header->hash_size * sizeof (unsigned int)); if (hash_table == NULL && lst_header->hash_size != 0) { bfd_set_error (bfd_error_no_memory); goto error_return; } som_dict = (struct som_entry *) malloc (lst_header->module_count * sizeof (struct som_entry)); if (som_dict == NULL && lst_header->module_count != 0) { bfd_set_error (bfd_error_no_memory); goto error_return; } /* Read in the hash table. The has table is an array of 32bit file offsets which point to the hash chains. */ if (bfd_read ((PTR) hash_table, lst_header->hash_size, 4, abfd) != lst_header->hash_size * 4) goto error_return; /* Seek to and read in the SOM dictionary. We will need this to fill in the carsym's filepos field. */ if (bfd_seek (abfd, lst_filepos + lst_header->dir_loc, SEEK_SET) < 0) goto error_return; if (bfd_read ((PTR) som_dict, lst_header->module_count, sizeof (struct som_entry), abfd) != lst_header->module_count * sizeof (struct som_entry)) goto error_return; /* Walk each chain filling in the carsyms as we go along. */ for (i = 0; i < lst_header->hash_size; i++) { struct lst_symbol_record lst_symbol; /* An empty chain has zero as it's file offset. */ if (hash_table[i] == 0) continue; /* Seek to and read the first symbol on the chain. */ if (bfd_seek (abfd, lst_filepos + hash_table[i], SEEK_SET) < 0) goto error_return; if (bfd_read ((PTR) & lst_symbol, 1, sizeof (lst_symbol), abfd) != sizeof (lst_symbol)) goto error_return; /* Get the name of the symbol, first get the length which is stored as a 32bit integer just before the symbol. One might ask why we don't just read in the entire string table and index into it. Well, according to the SOM ABI the string index can point *anywhere* in the archive to save space, so just using the string table would not be safe. */ if (bfd_seek (abfd, lst_filepos + lst_header->string_loc + lst_symbol.name.n_strx - 4, SEEK_SET) < 0) goto error_return; if (bfd_read (&len, 1, 4, abfd) != 4) goto error_return; /* Allocate space for the name and null terminate it too. */ set->name = bfd_zalloc (abfd, len + 1); if (!set->name) { bfd_set_error (bfd_error_no_memory); goto error_return; } if (bfd_read (set->name, 1, len, abfd) != len) goto error_return; set->name[len] = 0; /* Fill in the file offset. Note that the "location" field points to the SOM itself, not the ar_hdr in front of it. */ set->file_offset = som_dict[lst_symbol.som_index].location - sizeof (struct ar_hdr); /* Go to the next symbol. */ set++; /* Iterate through the rest of the chain. */ while (lst_symbol.next_entry) { /* Seek to the next symbol and read it in. */ if (bfd_seek (abfd, lst_filepos + lst_symbol.next_entry, SEEK_SET) <0) goto error_return; if (bfd_read ((PTR) & lst_symbol, 1, sizeof (lst_symbol), abfd) != sizeof (lst_symbol)) goto error_return; /* Seek to the name length & string and read them in. */ if (bfd_seek (abfd, lst_filepos + lst_header->string_loc + lst_symbol.name.n_strx - 4, SEEK_SET) < 0) goto error_return; if (bfd_read (&len, 1, 4, abfd) != 4) goto error_return; /* Allocate space for the name and null terminate it too. */ set->name = bfd_zalloc (abfd, len + 1); if (!set->name) { bfd_set_error (bfd_error_no_memory); goto error_return; } if (bfd_read (set->name, 1, len, abfd) != len) goto error_return; set->name[len] = 0; /* Fill in the file offset. Note that the "location" field points to the SOM itself, not the ar_hdr in front of it. */ set->file_offset = som_dict[lst_symbol.som_index].location - sizeof (struct ar_hdr); /* Go on to the next symbol. */ set++; } } /* If we haven't died by now, then we successfully read the entire archive symbol table. */ if (hash_table != NULL) free (hash_table); if (som_dict != NULL) free (som_dict); return true; error_return: if (hash_table != NULL) free (hash_table); if (som_dict != NULL) free (som_dict); return false; } /* Read in the LST from the archive. */ static boolean som_slurp_armap (abfd) bfd *abfd; { struct lst_header lst_header; struct ar_hdr ar_header; unsigned int parsed_size; struct artdata *ardata = bfd_ardata (abfd); char nextname[17]; int i = bfd_read ((PTR) nextname, 1, 16, abfd); /* Special cases. */ if (i == 0) return true; if (i != 16) return false; if (bfd_seek (abfd, (file_ptr) - 16, SEEK_CUR) < 0) return false; /* For archives without .o files there is no symbol table. */ if (strncmp (nextname, "/ ", 16)) { bfd_has_map (abfd) = false; return true; } /* Read in and sanity check the archive header. */ if (bfd_read ((PTR) &ar_header, 1, sizeof (struct ar_hdr), abfd) != sizeof (struct ar_hdr)) return false; if (strncmp (ar_header.ar_fmag, ARFMAG, 2)) { bfd_set_error (bfd_error_malformed_archive); return false; } /* How big is the archive symbol table entry? */ errno = 0; parsed_size = strtol (ar_header.ar_size, NULL, 10); if (errno != 0) { bfd_set_error (bfd_error_malformed_archive); return false; } /* Save off the file offset of the first real user data. */ ardata->first_file_filepos = bfd_tell (abfd) + parsed_size; /* Read in the library symbol table. We'll make heavy use of this in just a minute. */ if (bfd_read ((PTR) & lst_header, 1, sizeof (struct lst_header), abfd) != sizeof (struct lst_header)) return false; /* Sanity check. */ if (lst_header.a_magic != LIBMAGIC) { bfd_set_error (bfd_error_malformed_archive); return false; } /* Count the number of symbols in the library symbol table. */ if (som_bfd_count_ar_symbols (abfd, &lst_header, &ardata->symdef_count) == false) return false; /* Get back to the start of the library symbol table. */ if (bfd_seek (abfd, ardata->first_file_filepos - parsed_size + sizeof (struct lst_header), SEEK_SET) < 0) return false; /* Initializae the cache and allocate space for the library symbols. */ ardata->cache = 0; ardata->symdefs = (carsym *) bfd_alloc (abfd, (ardata->symdef_count * sizeof (carsym))); if (!ardata->symdefs) { bfd_set_error (bfd_error_no_memory); return false; } /* Now fill in the canonical archive symbols. */ if (som_bfd_fill_in_ar_symbols (abfd, &lst_header, &ardata->symdefs) == false) return false; /* Seek back to the "first" file in the archive. Note the "first" file may be the extended name table. */ if (bfd_seek (abfd, ardata->first_file_filepos, SEEK_SET) < 0) return false; /* Notify the generic archive code that we have a symbol map. */ bfd_has_map (abfd) = true; return true; } /* Begin preparing to write a SOM library symbol table. As part of the prep work we need to determine the number of symbols and the size of the associated string section. */ static boolean som_bfd_prep_for_ar_write (abfd, num_syms, stringsize) bfd *abfd; unsigned int *num_syms, *stringsize; { bfd *curr_bfd = abfd->archive_head; /* Some initialization. */ *num_syms = 0; *stringsize = 0; /* Iterate over each BFD within this archive. */ while (curr_bfd != NULL) { unsigned int curr_count, i; som_symbol_type *sym; /* Don't bother for non-SOM objects. */ if (curr_bfd->format != bfd_object || curr_bfd->xvec->flavour != bfd_target_som_flavour) { curr_bfd = curr_bfd->next; continue; } /* Make sure the symbol table has been read, then snag a pointer to it. It's a little slimey to grab the symbols via obj_som_symtab, but doing so avoids allocating lots of extra memory. */ if (som_slurp_symbol_table (curr_bfd) == false) return false; sym = obj_som_symtab (curr_bfd); curr_count = bfd_get_symcount (curr_bfd); /* Examine each symbol to determine if it belongs in the library symbol table. */ for (i = 0; i < curr_count; i++, sym++) { struct som_misc_symbol_info info; /* Derive SOM information from the BFD symbol. */ som_bfd_derive_misc_symbol_info (curr_bfd, &sym->symbol, &info); /* Should we include this symbol? */ if (info.symbol_type == ST_NULL || info.symbol_type == ST_SYM_EXT || info.symbol_type == ST_ARG_EXT) continue; /* Only global symbols and unsatisfied commons. */ if (info.symbol_scope != SS_UNIVERSAL && info.symbol_type != ST_STORAGE) continue; /* Do no include undefined symbols. */ if (sym->symbol.section == &bfd_und_section) continue; /* Bump the various counters, being careful to honor alignment considerations in the string table. */ (*num_syms)++; *stringsize = *stringsize + strlen (sym->symbol.name) + 5; while (*stringsize % 4) (*stringsize)++; } curr_bfd = curr_bfd->next; } return true; } /* Hash a symbol name based on the hashing algorithm presented in the SOM ABI. */ static unsigned int som_bfd_ar_symbol_hash (symbol) asymbol *symbol; { unsigned int len = strlen (symbol->name); /* Names with length 1 are special. */ if (len == 1) return 0x1000100 | (symbol->name[0] << 16) | symbol->name[0]; return ((len & 0x7f) << 24) | (symbol->name[1] << 16) | (symbol->name[len-2] << 8) | symbol->name[len-1]; } static CONST char * normalize (file) CONST char *file; { CONST char *filename = strrchr (file, '/'); if (filename != NULL) filename++; else filename = file; return filename; } /* Do the bulk of the work required to write the SOM library symbol table. */ static boolean som_bfd_ar_write_symbol_stuff (abfd, nsyms, string_size, lst) bfd *abfd; unsigned int nsyms, string_size; struct lst_header lst; { file_ptr lst_filepos; char *strings = NULL, *p; struct lst_symbol_record *lst_syms = NULL, *curr_lst_sym; bfd *curr_bfd; unsigned int *hash_table = NULL; struct som_entry *som_dict = NULL; struct lst_symbol_record **last_hash_entry = NULL; unsigned int curr_som_offset, som_index, extended_name_length = 0; unsigned int maxname = abfd->xvec->ar_max_namelen; hash_table = (unsigned int *) malloc (lst.hash_size * sizeof (unsigned int)); if (hash_table == NULL && lst.hash_size != 0) { bfd_set_error (bfd_error_no_memory); goto error_return; } som_dict = (struct som_entry *) malloc (lst.module_count * sizeof (struct som_entry)); if (som_dict == NULL && lst.module_count != 0) { bfd_set_error (bfd_error_no_memory); goto error_return; } last_hash_entry = ((struct lst_symbol_record **) malloc (lst.hash_size * sizeof (struct lst_symbol_record *))); if (last_hash_entry == NULL && lst.hash_size != 0) { bfd_set_error (bfd_error_no_memory); goto error_return; } /* Lots of fields are file positions relative to the start of the lst record. So save its location. */ lst_filepos = bfd_tell (abfd) - sizeof (struct lst_header); /* Some initialization. */ memset (hash_table, 0, 4 * lst.hash_size); memset (som_dict, 0, lst.module_count * sizeof (struct som_entry)); memset (last_hash_entry, 0, lst.hash_size * sizeof (struct lst_symbol_record *)); /* Symbols have som_index fields, so we have to keep track of the index of each SOM in the archive. The SOM dictionary has (among other things) the absolute file position for the SOM which a particular dictionary entry describes. We have to compute that information as we iterate through the SOMs/symbols. */ som_index = 0; curr_som_offset = 8 + 2 * sizeof (struct ar_hdr) + lst.file_end; /* Yow! We have to know the size of the extended name table too. */ for (curr_bfd = abfd->archive_head; curr_bfd != NULL; curr_bfd = curr_bfd->next) { CONST char *normal = normalize (curr_bfd->filename); unsigned int thislen; if (!normal) { bfd_set_error (bfd_error_no_memory); return false; } thislen = strlen (normal); if (thislen > maxname) extended_name_length += thislen + 1; } /* Make room for the archive header and the contents of the extended string table. */ if (extended_name_length) curr_som_offset += extended_name_length + sizeof (struct ar_hdr); /* Make sure we're properly aligned. */ curr_som_offset = (curr_som_offset + 0x1) & ~0x1; /* FIXME should be done with buffers just like everything else... */ lst_syms = malloc (nsyms * sizeof (struct lst_symbol_record)); if (lst_syms == NULL && nsyms != 0) { bfd_set_error (bfd_error_no_memory); goto error_return; } strings = malloc (string_size); if (strings == NULL && string_size != 0) { bfd_set_error (bfd_error_no_memory); goto error_return; } p = strings; curr_lst_sym = lst_syms; curr_bfd = abfd->archive_head; while (curr_bfd != NULL) { unsigned int curr_count, i; som_symbol_type *sym; /* Don't bother for non-SOM objects. */ if (curr_bfd->format != bfd_object || curr_bfd->xvec->flavour != bfd_target_som_flavour) { curr_bfd = curr_bfd->next; continue; } /* Make sure the symbol table has been read, then snag a pointer to it. It's a little slimey to grab the symbols via obj_som_symtab, but doing so avoids allocating lots of extra memory. */ if (som_slurp_symbol_table (curr_bfd) == false) goto error_return; sym = obj_som_symtab (curr_bfd); curr_count = bfd_get_symcount (curr_bfd); for (i = 0; i < curr_count; i++, sym++) { struct som_misc_symbol_info info; /* Derive SOM information from the BFD symbol. */ som_bfd_derive_misc_symbol_info (curr_bfd, &sym->symbol, &info); /* Should we include this symbol? */ if (info.symbol_type == ST_NULL || info.symbol_type == ST_SYM_EXT || info.symbol_type == ST_ARG_EXT) continue; /* Only global symbols and unsatisfied commons. */ if (info.symbol_scope != SS_UNIVERSAL && info.symbol_type != ST_STORAGE) continue; /* Do no include undefined symbols. */ if (sym->symbol.section == &bfd_und_section) continue; /* If this is the first symbol from this SOM, then update the SOM dictionary too. */ if (som_dict[som_index].location == 0) { som_dict[som_index].location = curr_som_offset; som_dict[som_index].length = arelt_size (curr_bfd); } /* Fill in the lst symbol record. */ curr_lst_sym->hidden = 0; curr_lst_sym->secondary_def = 0; curr_lst_sym->symbol_type = info.symbol_type; curr_lst_sym->symbol_scope = info.symbol_scope; curr_lst_sym->check_level = 0; curr_lst_sym->must_qualify = 0; curr_lst_sym->initially_frozen = 0; curr_lst_sym->memory_resident = 0; curr_lst_sym->is_common = (sym->symbol.section == &bfd_com_section); curr_lst_sym->dup_common = 0; curr_lst_sym->xleast = 0; curr_lst_sym->arg_reloc = info.arg_reloc; curr_lst_sym->name.n_strx = p - strings + 4; curr_lst_sym->qualifier_name.n_strx = 0; curr_lst_sym->symbol_info = info.symbol_info; curr_lst_sym->symbol_value = info.symbol_value; curr_lst_sym->symbol_descriptor = 0; curr_lst_sym->reserved = 0; curr_lst_sym->som_index = som_index; curr_lst_sym->symbol_key = som_bfd_ar_symbol_hash (&sym->symbol); curr_lst_sym->next_entry = 0; /* Insert into the hash table. */ if (hash_table[curr_lst_sym->symbol_key % lst.hash_size]) { struct lst_symbol_record *tmp; /* There is already something at the head of this hash chain, so tack this symbol onto the end of the chain. */ tmp = last_hash_entry[curr_lst_sym->symbol_key % lst.hash_size]; tmp->next_entry = (curr_lst_sym - lst_syms) * sizeof (struct lst_symbol_record) + lst.hash_size * 4 + lst.module_count * sizeof (struct som_entry) + sizeof (struct lst_header); } else { /* First entry in this hash chain. */ hash_table[curr_lst_sym->symbol_key % lst.hash_size] = (curr_lst_sym - lst_syms) * sizeof (struct lst_symbol_record) + lst.hash_size * 4 + lst.module_count * sizeof (struct som_entry) + sizeof (struct lst_header); } /* Keep track of the last symbol we added to this chain so we can easily update its next_entry pointer. */ last_hash_entry[curr_lst_sym->symbol_key % lst.hash_size] = curr_lst_sym; /* Update the string table. */ bfd_put_32 (abfd, strlen (sym->symbol.name), p); p += 4; strcpy (p, sym->symbol.name); p += strlen (sym->symbol.name) + 1; while ((int)p % 4) { bfd_put_8 (abfd, 0, p); p++; } /* Head to the next symbol. */ curr_lst_sym++; } /* Keep track of where each SOM will finally reside; then look at the next BFD. */ curr_som_offset += arelt_size (curr_bfd) + sizeof (struct ar_hdr); curr_bfd = curr_bfd->next; som_index++; } /* Now scribble out the hash table. */ if (bfd_write ((PTR) hash_table, lst.hash_size, 4, abfd) != lst.hash_size * 4) goto error_return; /* Then the SOM dictionary. */ if (bfd_write ((PTR) som_dict, lst.module_count, sizeof (struct som_entry), abfd) != lst.module_count * sizeof (struct som_entry)) goto error_return; /* The library symbols. */ if (bfd_write ((PTR) lst_syms, nsyms, sizeof (struct lst_symbol_record), abfd) != nsyms * sizeof (struct lst_symbol_record)) goto error_return; /* And finally the strings. */ if (bfd_write ((PTR) strings, string_size, 1, abfd) != string_size) goto error_return; if (hash_table != NULL) free (hash_table); if (som_dict != NULL) free (som_dict); if (last_hash_entry != NULL) free (last_hash_entry); if (lst_syms != NULL) free (lst_syms); if (strings != NULL) free (strings); return true; error_return: if (hash_table != NULL) free (hash_table); if (som_dict != NULL) free (som_dict); if (last_hash_entry != NULL) free (last_hash_entry); if (lst_syms != NULL) free (lst_syms); if (strings != NULL) free (strings); return false; } /* Write out the LST for the archive. You'll never believe this is really how armaps are handled in SOM... */ static boolean som_write_armap (abfd) bfd *abfd; { bfd *curr_bfd; struct stat statbuf; unsigned int i, lst_size, nsyms, stringsize; struct ar_hdr hdr; struct lst_header lst; int *p; /* We'll use this for the archive's date and mode later. */ if (stat (abfd->filename, &statbuf) != 0) { bfd_set_error (bfd_error_system_call); return false; } /* Fudge factor. */ bfd_ardata (abfd)->armap_timestamp = statbuf.st_mtime + 60; /* Account for the lst header first. */ lst_size = sizeof (struct lst_header); /* Start building the LST header. */ lst.system_id = HP9000S800_ID; lst.a_magic = LIBMAGIC; lst.version_id = VERSION_ID; lst.file_time.secs = 0; lst.file_time.nanosecs = 0; lst.hash_loc = lst_size; lst.hash_size = SOM_LST_HASH_SIZE; /* Hash table is a SOM_LST_HASH_SIZE 32bit offsets. */ lst_size += 4 * SOM_LST_HASH_SIZE; /* We need to count the number of SOMs in this archive. */ curr_bfd = abfd->archive_head; lst.module_count = 0; while (curr_bfd != NULL) { /* Only true SOM objects count. */ if (curr_bfd->format == bfd_object && curr_bfd->xvec->flavour == bfd_target_som_flavour) lst.module_count++; curr_bfd = curr_bfd->next; } lst.module_limit = lst.module_count; lst.dir_loc = lst_size; lst_size += sizeof (struct som_entry) * lst.module_count; /* We don't support import/export tables, auxiliary headers, or free lists yet. Make the linker work a little harder to make our life easier. */ lst.export_loc = 0; lst.export_count = 0; lst.import_loc = 0; lst.aux_loc = 0; lst.aux_size = 0; /* Count how many symbols we will have on the hash chains and the size of the associated string table. */ if (som_bfd_prep_for_ar_write (abfd, &nsyms, &stringsize) == false) return false; lst_size += sizeof (struct lst_symbol_record) * nsyms; /* For the string table. One day we might actually use this info to avoid small seeks/reads when reading archives. */ lst.string_loc = lst_size; lst.string_size = stringsize; lst_size += stringsize; /* SOM ABI says this must be zero. */ lst.free_list = 0; lst.file_end = lst_size; /* Compute the checksum. Must happen after the entire lst header has filled in. */ p = (int *)&lst; lst.checksum = 0; for (i = 0; i < sizeof (struct lst_header)/sizeof (int) - 1; i++) lst.checksum ^= *p++; sprintf (hdr.ar_name, "/ "); sprintf (hdr.ar_date, "%ld", bfd_ardata (abfd)->armap_timestamp); sprintf (hdr.ar_uid, "%d", getuid ()); sprintf (hdr.ar_gid, "%d", getgid ()); sprintf (hdr.ar_mode, "%-8o", (unsigned int) statbuf.st_mode); sprintf (hdr.ar_size, "%-10d", (int) lst_size); hdr.ar_fmag[0] = '`'; hdr.ar_fmag[1] = '\012'; /* Turn any nulls into spaces. */ for (i = 0; i < sizeof (struct ar_hdr); i++) if (((char *) (&hdr))[i] == '\0') (((char *) (&hdr))[i]) = ' '; /* Scribble out the ar header. */ if (bfd_write ((PTR) &hdr, 1, sizeof (struct ar_hdr), abfd) != sizeof (struct ar_hdr)) return false; /* Now scribble out the lst header. */ if (bfd_write ((PTR) &lst, 1, sizeof (struct lst_header), abfd) != sizeof (struct lst_header)) return false; /* Build and write the armap. */ if (som_bfd_ar_write_symbol_stuff (abfd, nsyms, stringsize, lst) == false) return false; /* Done. */ return true; } /* End of miscellaneous support functions. */ #define som_bfd_debug_info_start bfd_void #define som_bfd_debug_info_end bfd_void #define som_bfd_debug_info_accumulate (PROTO(void,(*),(bfd*, struct sec *))) bfd_void #define som_openr_next_archived_file bfd_generic_openr_next_archived_file #define som_generic_stat_arch_elt bfd_generic_stat_arch_elt #define som_truncate_arname bfd_bsd_truncate_arname #define som_slurp_extended_name_table _bfd_slurp_extended_name_table #define som_get_lineno (struct lineno_cache_entry *(*)())bfd_nullvoidptr #define som_close_and_cleanup bfd_generic_close_and_cleanup #define som_bfd_get_relocated_section_contents \ bfd_generic_get_relocated_section_contents #define som_bfd_relax_section bfd_generic_relax_section #define som_bfd_make_debug_symbol \ ((asymbol *(*) PARAMS ((bfd *, void *, unsigned long))) bfd_nullvoidptr) #define som_bfd_link_hash_table_create _bfd_generic_link_hash_table_create #define som_bfd_link_add_symbols _bfd_generic_link_add_symbols #define som_bfd_final_link _bfd_generic_final_link /* Core file support is in the hpux-core backend. */ #define som_core_file_failing_command _bfd_dummy_core_file_failing_command #define som_core_file_failing_signal _bfd_dummy_core_file_failing_signal #define som_core_file_matches_executable_p _bfd_dummy_core_file_matches_executable_p bfd_target som_vec = { "som", /* name */ bfd_target_som_flavour, true, /* target byte order */ true, /* target headers byte order */ (HAS_RELOC | EXEC_P | /* object flags */ HAS_LINENO | HAS_DEBUG | HAS_SYMS | HAS_LOCALS | WP_TEXT | D_PAGED), (SEC_CODE | SEC_DATA | SEC_ROM | SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* section flags */ /* leading_symbol_char: is the first char of a user symbol predictable, and if so what is it */ 0, '/', /* ar_pad_char */ 14, /* ar_max_namelen */ 3, /* minimum alignment */ bfd_getb64, bfd_getb_signed_64, bfd_putb64, bfd_getb32, bfd_getb_signed_32, bfd_putb32, bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* data */ bfd_getb64, bfd_getb_signed_64, bfd_putb64, bfd_getb32, bfd_getb_signed_32, bfd_putb32, bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* hdrs */ {_bfd_dummy_target, som_object_p, /* bfd_check_format */ bfd_generic_archive_p, _bfd_dummy_target }, { bfd_false, som_mkobject, _bfd_generic_mkarchive, bfd_false }, { bfd_false, som_write_object_contents, _bfd_write_archive_contents, bfd_false, }, #undef som JUMP_TABLE (som), (PTR) 0 }; #endif /* HOST_HPPAHPUX || HOST_HPPABSD || HOST_HPPAOSF */