/* Intel 80386/80486-specific support for 32-bit ELF Copyright 1993, 1994, 1995, 1996, 1997 Free Software Foundation, Inc. This file is part of BFD, the Binary File Descriptor library. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include "bfd.h" #include "sysdep.h" #include "bfdlink.h" #include "libbfd.h" #include "elf-bfd.h" static reloc_howto_type *elf_i386_reloc_type_lookup PARAMS ((bfd *, bfd_reloc_code_real_type)); static void elf_i386_info_to_howto PARAMS ((bfd *, arelent *, Elf32_Internal_Rela *)); static void elf_i386_info_to_howto_rel PARAMS ((bfd *, arelent *, Elf32_Internal_Rel *)); static boolean elf_i386_is_local_label_name PARAMS ((bfd *, const char *)); static struct bfd_hash_entry *elf_i386_link_hash_newfunc PARAMS ((struct bfd_hash_entry *, struct bfd_hash_table *, const char *)); static struct bfd_link_hash_table *elf_i386_link_hash_table_create PARAMS ((bfd *)); static boolean elf_i386_check_relocs PARAMS ((bfd *, struct bfd_link_info *, asection *, const Elf_Internal_Rela *)); static boolean elf_i386_adjust_dynamic_symbol PARAMS ((struct bfd_link_info *, struct elf_link_hash_entry *)); static boolean elf_i386_size_dynamic_sections PARAMS ((bfd *, struct bfd_link_info *)); static boolean elf_i386_relocate_section PARAMS ((bfd *, struct bfd_link_info *, bfd *, asection *, bfd_byte *, Elf_Internal_Rela *, Elf_Internal_Sym *, asection **)); static boolean elf_i386_finish_dynamic_symbol PARAMS ((bfd *, struct bfd_link_info *, struct elf_link_hash_entry *, Elf_Internal_Sym *)); static boolean elf_i386_finish_dynamic_sections PARAMS ((bfd *, struct bfd_link_info *)); #define USE_REL 1 /* 386 uses REL relocations instead of RELA */ enum reloc_type { R_386_NONE = 0, R_386_32, R_386_PC32, R_386_GOT32, R_386_PLT32, R_386_COPY, R_386_GLOB_DAT, R_386_JUMP_SLOT, R_386_RELATIVE, R_386_GOTOFF, R_386_GOTPC, FIRST_INVALID_RELOC, LAST_INVALID_RELOC = 19, /* The remaining relocs are a GNU extension. */ R_386_16 = 20, R_386_PC16, R_386_8, R_386_PC8, R_386_max }; #if 0 static CONST char *CONST reloc_type_names[] = { "R_386_NONE", "R_386_32", "R_386_PC32", "R_386_GOT32", "R_386_PLT32", "R_386_COPY", "R_386_GLOB_DAT", "R_386_JUMP_SLOT", "R_386_RELATIVE", "R_386_GOTOFF", "R_386_GOTPC", }; #endif static reloc_howto_type elf_howto_table[]= { HOWTO(R_386_NONE, 0,0, 0,false,0,complain_overflow_bitfield, bfd_elf_generic_reloc,"R_386_NONE", true,0x00000000,0x00000000,false), HOWTO(R_386_32, 0,2,32,false,0,complain_overflow_bitfield, bfd_elf_generic_reloc,"R_386_32", true,0xffffffff,0xffffffff,false), HOWTO(R_386_PC32, 0,2,32,true, 0,complain_overflow_bitfield, bfd_elf_generic_reloc,"R_386_PC32", true,0xffffffff,0xffffffff,true), HOWTO(R_386_GOT32, 0,2,32,false,0,complain_overflow_bitfield, bfd_elf_generic_reloc,"R_386_GOT32", true,0xffffffff,0xffffffff,false), HOWTO(R_386_PLT32, 0,2,32,true,0,complain_overflow_bitfield, bfd_elf_generic_reloc,"R_386_PLT32", true,0xffffffff,0xffffffff,true), HOWTO(R_386_COPY, 0,2,32,false,0,complain_overflow_bitfield, bfd_elf_generic_reloc,"R_386_COPY", true,0xffffffff,0xffffffff,false), HOWTO(R_386_GLOB_DAT, 0,2,32,false,0,complain_overflow_bitfield, bfd_elf_generic_reloc,"R_386_GLOB_DAT", true,0xffffffff,0xffffffff,false), HOWTO(R_386_JUMP_SLOT, 0,2,32,false,0,complain_overflow_bitfield, bfd_elf_generic_reloc,"R_386_JUMP_SLOT",true,0xffffffff,0xffffffff,false), HOWTO(R_386_RELATIVE, 0,2,32,false,0,complain_overflow_bitfield, bfd_elf_generic_reloc,"R_386_RELATIVE", true,0xffffffff,0xffffffff,false), HOWTO(R_386_GOTOFF, 0,2,32,false,0,complain_overflow_bitfield, bfd_elf_generic_reloc,"R_386_GOTOFF", true,0xffffffff,0xffffffff,false), HOWTO(R_386_GOTPC, 0,2,32,true,0,complain_overflow_bitfield, bfd_elf_generic_reloc,"R_386_GOTPC", true,0xffffffff,0xffffffff,true), { 11 }, { 12 }, { 13 }, { 14 }, { 15 }, { 16 }, { 17 }, { 18 }, { 19 }, /* The remaining relocs are a GNU extension. */ HOWTO(R_386_16, 0,1,16,false,0,complain_overflow_bitfield, bfd_elf_generic_reloc,"R_386_16", true,0xffff,0xffff,false), HOWTO(R_386_PC16, 0,1,16,true, 0,complain_overflow_bitfield, bfd_elf_generic_reloc,"R_386_PC16", true,0xffff,0xffff,true), HOWTO(R_386_8, 0,0,8,false,0,complain_overflow_bitfield, bfd_elf_generic_reloc,"R_386_8", true,0xff,0xff,false), HOWTO(R_386_PC8, 0,0,8,true, 0,complain_overflow_bitfield, bfd_elf_generic_reloc,"R_386_PC8", true,0xff,0xff,true), }; #ifdef DEBUG_GEN_RELOC #define TRACE(str) fprintf (stderr, "i386 bfd reloc lookup %d (%s)\n", code, str) #else #define TRACE(str) #endif static reloc_howto_type * elf_i386_reloc_type_lookup (abfd, code) bfd *abfd; bfd_reloc_code_real_type code; { switch (code) { case BFD_RELOC_NONE: TRACE ("BFD_RELOC_NONE"); return &elf_howto_table[ (int)R_386_NONE ]; case BFD_RELOC_32: TRACE ("BFD_RELOC_32"); return &elf_howto_table[ (int)R_386_32 ]; case BFD_RELOC_32_PCREL: TRACE ("BFD_RELOC_PC32"); return &elf_howto_table[ (int)R_386_PC32 ]; case BFD_RELOC_386_GOT32: TRACE ("BFD_RELOC_386_GOT32"); return &elf_howto_table[ (int)R_386_GOT32 ]; case BFD_RELOC_386_PLT32: TRACE ("BFD_RELOC_386_PLT32"); return &elf_howto_table[ (int)R_386_PLT32 ]; case BFD_RELOC_386_COPY: TRACE ("BFD_RELOC_386_COPY"); return &elf_howto_table[ (int)R_386_COPY ]; case BFD_RELOC_386_GLOB_DAT: TRACE ("BFD_RELOC_386_GLOB_DAT"); return &elf_howto_table[ (int)R_386_GLOB_DAT ]; case BFD_RELOC_386_JUMP_SLOT: TRACE ("BFD_RELOC_386_JUMP_SLOT"); return &elf_howto_table[ (int)R_386_JUMP_SLOT ]; case BFD_RELOC_386_RELATIVE: TRACE ("BFD_RELOC_386_RELATIVE"); return &elf_howto_table[ (int)R_386_RELATIVE ]; case BFD_RELOC_386_GOTOFF: TRACE ("BFD_RELOC_386_GOTOFF"); return &elf_howto_table[ (int)R_386_GOTOFF ]; case BFD_RELOC_386_GOTPC: TRACE ("BFD_RELOC_386_GOTPC"); return &elf_howto_table[ (int)R_386_GOTPC ]; /* The remaining relocs are a GNU extension. */ case BFD_RELOC_16: TRACE ("BFD_RELOC_16"); return &elf_howto_table[(int) R_386_16]; case BFD_RELOC_16_PCREL: TRACE ("BFD_RELOC_16_PCREL"); return &elf_howto_table[(int) R_386_PC16]; case BFD_RELOC_8: TRACE ("BFD_RELOC_8"); return &elf_howto_table[(int) R_386_8]; case BFD_RELOC_8_PCREL: TRACE ("BFD_RELOC_8_PCREL"); return &elf_howto_table[(int) R_386_PC8]; default: break; } TRACE ("Unknown"); return 0; } static void elf_i386_info_to_howto (abfd, cache_ptr, dst) bfd *abfd; arelent *cache_ptr; Elf32_Internal_Rela *dst; { abort (); } static void elf_i386_info_to_howto_rel (abfd, cache_ptr, dst) bfd *abfd; arelent *cache_ptr; Elf32_Internal_Rel *dst; { enum reloc_type type; type = (enum reloc_type) ELF32_R_TYPE (dst->r_info); BFD_ASSERT (type < R_386_max); BFD_ASSERT (type < FIRST_INVALID_RELOC || type > LAST_INVALID_RELOC); cache_ptr->howto = &elf_howto_table[(int) type]; } /* Return whether a symbol name implies a local label. The UnixWare 2.1 cc generates temporary symbols that start with .X, so we recognize them here. FIXME: do other SVR4 compilers also use .X?. If so, we should move the .X recognition into _bfd_elf_is_local_label_name. */ static boolean elf_i386_is_local_label_name (abfd, name) bfd *abfd; const char *name; { if (name[0] == '.' && name[1] == 'X') return true; return _bfd_elf_is_local_label_name (abfd, name); } /* Functions for the i386 ELF linker. */ /* The name of the dynamic interpreter. This is put in the .interp section. */ #define ELF_DYNAMIC_INTERPRETER "/usr/lib/libc.so.1" /* The size in bytes of an entry in the procedure linkage table. */ #define PLT_ENTRY_SIZE 16 /* The first entry in an absolute procedure linkage table looks like this. See the SVR4 ABI i386 supplement to see how this works. */ static const bfd_byte elf_i386_plt0_entry[PLT_ENTRY_SIZE] = { 0xff, 0x35, /* pushl contents of address */ 0, 0, 0, 0, /* replaced with address of .got + 4. */ 0xff, 0x25, /* jmp indirect */ 0, 0, 0, 0, /* replaced with address of .got + 8. */ 0, 0, 0, 0 /* pad out to 16 bytes. */ }; /* Subsequent entries in an absolute procedure linkage table look like this. */ static const bfd_byte elf_i386_plt_entry[PLT_ENTRY_SIZE] = { 0xff, 0x25, /* jmp indirect */ 0, 0, 0, 0, /* replaced with address of this symbol in .got. */ 0x68, /* pushl immediate */ 0, 0, 0, 0, /* replaced with offset into relocation table. */ 0xe9, /* jmp relative */ 0, 0, 0, 0 /* replaced with offset to start of .plt. */ }; /* The first entry in a PIC procedure linkage table look like this. */ static const bfd_byte elf_i386_pic_plt0_entry[PLT_ENTRY_SIZE] = { 0xff, 0xb3, 4, 0, 0, 0, /* pushl 4(%ebx) */ 0xff, 0xa3, 8, 0, 0, 0, /* jmp *8(%ebx) */ 0, 0, 0, 0 /* pad out to 16 bytes. */ }; /* Subsequent entries in a PIC procedure linkage table look like this. */ static const bfd_byte elf_i386_pic_plt_entry[PLT_ENTRY_SIZE] = { 0xff, 0xa3, /* jmp *offset(%ebx) */ 0, 0, 0, 0, /* replaced with offset of this symbol in .got. */ 0x68, /* pushl immediate */ 0, 0, 0, 0, /* replaced with offset into relocation table. */ 0xe9, /* jmp relative */ 0, 0, 0, 0 /* replaced with offset to start of .plt. */ }; /* The i386 linker needs to keep track of the number of relocs that it decides to copy in check_relocs for each symbol. This is so that it can discard PC relative relocs if it doesn't need them when linking with -Bsymbolic. We store the information in a field extending the regular ELF linker hash table. */ /* This structure keeps track of the number of PC relative relocs we have copied for a given symbol. */ struct elf_i386_pcrel_relocs_copied { /* Next section. */ struct elf_i386_pcrel_relocs_copied *next; /* A section in dynobj. */ asection *section; /* Number of relocs copied in this section. */ bfd_size_type count; }; /* i386 ELF linker hash entry. */ struct elf_i386_link_hash_entry { struct elf_link_hash_entry root; /* Number of PC relative relocs copied for this symbol. */ struct elf_i386_pcrel_relocs_copied *pcrel_relocs_copied; }; /* i386 ELF linker hash table. */ struct elf_i386_link_hash_table { struct elf_link_hash_table root; }; /* Declare this now that the above structures are defined. */ static boolean elf_i386_discard_copies PARAMS ((struct elf_i386_link_hash_entry *, PTR)); /* Traverse an i386 ELF linker hash table. */ #define elf_i386_link_hash_traverse(table, func, info) \ (elf_link_hash_traverse \ (&(table)->root, \ (boolean (*) PARAMS ((struct elf_link_hash_entry *, PTR))) (func), \ (info))) /* Get the i386 ELF linker hash table from a link_info structure. */ #define elf_i386_hash_table(p) \ ((struct elf_i386_link_hash_table *) ((p)->hash)) /* Create an entry in an i386 ELF linker hash table. */ static struct bfd_hash_entry * elf_i386_link_hash_newfunc (entry, table, string) struct bfd_hash_entry *entry; struct bfd_hash_table *table; const char *string; { struct elf_i386_link_hash_entry *ret = (struct elf_i386_link_hash_entry *) entry; /* Allocate the structure if it has not already been allocated by a subclass. */ if (ret == (struct elf_i386_link_hash_entry *) NULL) ret = ((struct elf_i386_link_hash_entry *) bfd_hash_allocate (table, sizeof (struct elf_i386_link_hash_entry))); if (ret == (struct elf_i386_link_hash_entry *) NULL) return (struct bfd_hash_entry *) ret; /* Call the allocation method of the superclass. */ ret = ((struct elf_i386_link_hash_entry *) _bfd_elf_link_hash_newfunc ((struct bfd_hash_entry *) ret, table, string)); if (ret != (struct elf_i386_link_hash_entry *) NULL) { ret->pcrel_relocs_copied = NULL; } return (struct bfd_hash_entry *) ret; } /* Create an i386 ELF linker hash table. */ static struct bfd_link_hash_table * elf_i386_link_hash_table_create (abfd) bfd *abfd; { struct elf_i386_link_hash_table *ret; ret = ((struct elf_i386_link_hash_table *) bfd_alloc (abfd, sizeof (struct elf_i386_link_hash_table))); if (ret == (struct elf_i386_link_hash_table *) NULL) return NULL; if (! _bfd_elf_link_hash_table_init (&ret->root, abfd, elf_i386_link_hash_newfunc)) { bfd_release (abfd, ret); return NULL; } return &ret->root.root; } /* Look through the relocs for a section during the first phase, and allocate space in the global offset table or procedure linkage table. */ static boolean elf_i386_check_relocs (abfd, info, sec, relocs) bfd *abfd; struct bfd_link_info *info; asection *sec; const Elf_Internal_Rela *relocs; { bfd *dynobj; Elf_Internal_Shdr *symtab_hdr; struct elf_link_hash_entry **sym_hashes; bfd_vma *local_got_offsets; const Elf_Internal_Rela *rel; const Elf_Internal_Rela *rel_end; asection *sgot; asection *srelgot; asection *sreloc; if (info->relocateable) return true; dynobj = elf_hash_table (info)->dynobj; symtab_hdr = &elf_tdata (abfd)->symtab_hdr; sym_hashes = elf_sym_hashes (abfd); local_got_offsets = elf_local_got_offsets (abfd); sgot = NULL; srelgot = NULL; sreloc = NULL; rel_end = relocs + sec->reloc_count; for (rel = relocs; rel < rel_end; rel++) { unsigned long r_symndx; struct elf_link_hash_entry *h; r_symndx = ELF32_R_SYM (rel->r_info); if (r_symndx < symtab_hdr->sh_info) h = NULL; else h = sym_hashes[r_symndx - symtab_hdr->sh_info]; /* Some relocs require a global offset table. */ if (dynobj == NULL) { switch (ELF32_R_TYPE (rel->r_info)) { case R_386_GOT32: case R_386_GOTOFF: case R_386_GOTPC: elf_hash_table (info)->dynobj = dynobj = abfd; if (! _bfd_elf_create_got_section (dynobj, info)) return false; break; default: break; } } switch (ELF32_R_TYPE (rel->r_info)) { case R_386_GOT32: /* This symbol requires a global offset table entry. */ if (sgot == NULL) { sgot = bfd_get_section_by_name (dynobj, ".got"); BFD_ASSERT (sgot != NULL); } if (srelgot == NULL && (h != NULL || info->shared)) { srelgot = bfd_get_section_by_name (dynobj, ".rel.got"); if (srelgot == NULL) { srelgot = bfd_make_section (dynobj, ".rel.got"); if (srelgot == NULL || ! bfd_set_section_flags (dynobj, srelgot, (SEC_ALLOC | SEC_LOAD | SEC_HAS_CONTENTS | SEC_IN_MEMORY | SEC_LINKER_CREATED | SEC_READONLY)) || ! bfd_set_section_alignment (dynobj, srelgot, 2)) return false; } } if (h != NULL) { if (h->got_offset != (bfd_vma) -1) { /* We have already allocated space in the .got. */ break; } h->got_offset = sgot->_raw_size; /* Make sure this symbol is output as a dynamic symbol. */ if (h->dynindx == -1) { if (! bfd_elf32_link_record_dynamic_symbol (info, h)) return false; } srelgot->_raw_size += sizeof (Elf32_External_Rel); } else { /* This is a global offset table entry for a local symbol. */ if (local_got_offsets == NULL) { size_t size; register unsigned int i; size = symtab_hdr->sh_info * sizeof (bfd_vma); local_got_offsets = (bfd_vma *) bfd_alloc (abfd, size); if (local_got_offsets == NULL) return false; elf_local_got_offsets (abfd) = local_got_offsets; for (i = 0; i < symtab_hdr->sh_info; i++) local_got_offsets[i] = (bfd_vma) -1; } if (local_got_offsets[r_symndx] != (bfd_vma) -1) { /* We have already allocated space in the .got. */ break; } local_got_offsets[r_symndx] = sgot->_raw_size; if (info->shared) { /* If we are generating a shared object, we need to output a R_386_RELATIVE reloc so that the dynamic linker can adjust this GOT entry. */ srelgot->_raw_size += sizeof (Elf32_External_Rel); } } sgot->_raw_size += 4; break; case R_386_PLT32: /* This symbol requires a procedure linkage table entry. We actually build the entry in adjust_dynamic_symbol, because this might be a case of linking PIC code which is never referenced by a dynamic object, in which case we don't need to generate a procedure linkage table entry after all. */ /* If this is a local symbol, we resolve it directly without creating a procedure linkage table entry. */ if (h == NULL) continue; h->elf_link_hash_flags |= ELF_LINK_HASH_NEEDS_PLT; break; case R_386_32: case R_386_PC32: /* If we are creating a shared library, and this is a reloc against a global symbol, or a non PC relative reloc against a local symbol, then we need to copy the reloc into the shared library. However, if we are linking with -Bsymbolic, we do not need to copy a reloc against a global symbol which is defined in an object we are including in the link (i.e., DEF_REGULAR is set). At this point we have not seen all the input files, so it is possible that DEF_REGULAR is not set now but will be set later (it is never cleared). We account for that possibility below by storing information in the pcrel_relocs_copied field of the hash table entry. */ if (info->shared && (ELF32_R_TYPE (rel->r_info) != R_386_PC32 || (h != NULL && (! info->symbolic || (h->elf_link_hash_flags & ELF_LINK_HASH_DEF_REGULAR) == 0)))) { /* When creating a shared object, we must copy these reloc types into the output file. We create a reloc section in dynobj and make room for this reloc. */ if (sreloc == NULL) { const char *name; name = (bfd_elf_string_from_elf_section (abfd, elf_elfheader (abfd)->e_shstrndx, elf_section_data (sec)->rel_hdr.sh_name)); if (name == NULL) return false; BFD_ASSERT (strncmp (name, ".rel", 4) == 0 && strcmp (bfd_get_section_name (abfd, sec), name + 4) == 0); sreloc = bfd_get_section_by_name (dynobj, name); if (sreloc == NULL) { flagword flags; sreloc = bfd_make_section (dynobj, name); flags = (SEC_HAS_CONTENTS | SEC_READONLY | SEC_IN_MEMORY | SEC_LINKER_CREATED); if ((sec->flags & SEC_ALLOC) != 0) flags |= SEC_ALLOC | SEC_LOAD; if (sreloc == NULL || ! bfd_set_section_flags (dynobj, sreloc, flags) || ! bfd_set_section_alignment (dynobj, sreloc, 2)) return false; } } sreloc->_raw_size += sizeof (Elf32_External_Rel); /* If we are linking with -Bsymbolic, and this is a global symbol, we count the number of PC relative relocations we have entered for this symbol, so that we can discard them again if the symbol is later defined by a regular object. Note that this function is only called if we are using an elf_i386 linker hash table, which means that h is really a pointer to an elf_i386_link_hash_entry. */ if (h != NULL && info->symbolic) { struct elf_i386_link_hash_entry *eh; struct elf_i386_pcrel_relocs_copied *p; eh = (struct elf_i386_link_hash_entry *) h; for (p = eh->pcrel_relocs_copied; p != NULL; p = p->next) if (p->section == sreloc) break; if (p == NULL) { p = ((struct elf_i386_pcrel_relocs_copied *) bfd_alloc (dynobj, sizeof *p)); if (p == NULL) return false; p->next = eh->pcrel_relocs_copied; eh->pcrel_relocs_copied = p; p->section = sreloc; p->count = 0; } ++p->count; } } break; default: break; } } return true; } /* Adjust a symbol defined by a dynamic object and referenced by a regular object. The current definition is in some section of the dynamic object, but we're not including those sections. We have to change the definition to something the rest of the link can understand. */ static boolean elf_i386_adjust_dynamic_symbol (info, h) struct bfd_link_info *info; struct elf_link_hash_entry *h; { bfd *dynobj; asection *s; unsigned int power_of_two; dynobj = elf_hash_table (info)->dynobj; /* Make sure we know what is going on here. */ BFD_ASSERT (dynobj != NULL && ((h->elf_link_hash_flags & ELF_LINK_HASH_NEEDS_PLT) || h->weakdef != NULL || ((h->elf_link_hash_flags & ELF_LINK_HASH_DEF_DYNAMIC) != 0 && (h->elf_link_hash_flags & ELF_LINK_HASH_REF_REGULAR) != 0 && (h->elf_link_hash_flags & ELF_LINK_HASH_DEF_REGULAR) == 0))); /* If this is a function, put it in the procedure linkage table. We will fill in the contents of the procedure linkage table later, when we know the address of the .got section. */ if (h->type == STT_FUNC || (h->elf_link_hash_flags & ELF_LINK_HASH_NEEDS_PLT) != 0) { if (! info->shared && (h->elf_link_hash_flags & ELF_LINK_HASH_DEF_DYNAMIC) == 0 && (h->elf_link_hash_flags & ELF_LINK_HASH_REF_DYNAMIC) == 0) { /* This case can occur if we saw a PLT32 reloc in an input file, but the symbol was never referred to by a dynamic object. In such a case, we don't actually need to build a procedure linkage table, and we can just do a PC32 reloc instead. */ BFD_ASSERT ((h->elf_link_hash_flags & ELF_LINK_HASH_NEEDS_PLT) != 0); return true; } /* Make sure this symbol is output as a dynamic symbol. */ if (h->dynindx == -1) { if (! bfd_elf32_link_record_dynamic_symbol (info, h)) return false; } s = bfd_get_section_by_name (dynobj, ".plt"); BFD_ASSERT (s != NULL); /* If this is the first .plt entry, make room for the special first entry. */ if (s->_raw_size == 0) s->_raw_size += PLT_ENTRY_SIZE; /* If this symbol is not defined in a regular file, and we are not generating a shared library, then set the symbol to this location in the .plt. This is required to make function pointers compare as equal between the normal executable and the shared library. */ if (! info->shared && (h->elf_link_hash_flags & ELF_LINK_HASH_DEF_REGULAR) == 0) { h->root.u.def.section = s; h->root.u.def.value = s->_raw_size; } h->plt_offset = s->_raw_size; /* Make room for this entry. */ s->_raw_size += PLT_ENTRY_SIZE; /* We also need to make an entry in the .got.plt section, which will be placed in the .got section by the linker script. */ s = bfd_get_section_by_name (dynobj, ".got.plt"); BFD_ASSERT (s != NULL); s->_raw_size += 4; /* We also need to make an entry in the .rel.plt section. */ s = bfd_get_section_by_name (dynobj, ".rel.plt"); BFD_ASSERT (s != NULL); s->_raw_size += sizeof (Elf32_External_Rel); return true; } /* If this is a weak symbol, and there is a real definition, the processor independent code will have arranged for us to see the real definition first, and we can just use the same value. */ if (h->weakdef != NULL) { BFD_ASSERT (h->weakdef->root.type == bfd_link_hash_defined || h->weakdef->root.type == bfd_link_hash_defweak); h->root.u.def.section = h->weakdef->root.u.def.section; h->root.u.def.value = h->weakdef->root.u.def.value; return true; } /* This is a reference to a symbol defined by a dynamic object which is not a function. */ /* If we are creating a shared library, we must presume that the only references to the symbol are via the global offset table. For such cases we need not do anything here; the relocations will be handled correctly by relocate_section. */ if (info->shared) return true; /* We must allocate the symbol in our .dynbss section, which will become part of the .bss section of the executable. There will be an entry for this symbol in the .dynsym section. The dynamic object will contain position independent code, so all references from the dynamic object to this symbol will go through the global offset table. The dynamic linker will use the .dynsym entry to determine the address it must put in the global offset table, so both the dynamic object and the regular object will refer to the same memory location for the variable. */ s = bfd_get_section_by_name (dynobj, ".dynbss"); BFD_ASSERT (s != NULL); /* We must generate a R_386_COPY reloc to tell the dynamic linker to copy the initial value out of the dynamic object and into the runtime process image. We need to remember the offset into the .rel.bss section we are going to use. */ if ((h->root.u.def.section->flags & SEC_ALLOC) != 0) { asection *srel; srel = bfd_get_section_by_name (dynobj, ".rel.bss"); BFD_ASSERT (srel != NULL); srel->_raw_size += sizeof (Elf32_External_Rel); h->elf_link_hash_flags |= ELF_LINK_HASH_NEEDS_COPY; } /* We need to figure out the alignment required for this symbol. I have no idea how ELF linkers handle this. */ power_of_two = bfd_log2 (h->size); if (power_of_two > 3) power_of_two = 3; /* Apply the required alignment. */ s->_raw_size = BFD_ALIGN (s->_raw_size, (bfd_size_type) (1 << power_of_two)); if (power_of_two > bfd_get_section_alignment (dynobj, s)) { if (! bfd_set_section_alignment (dynobj, s, power_of_two)) return false; } /* Define the symbol as being at this point in the section. */ h->root.u.def.section = s; h->root.u.def.value = s->_raw_size; /* Increment the section size to make room for the symbol. */ s->_raw_size += h->size; return true; } /* Set the sizes of the dynamic sections. */ static boolean elf_i386_size_dynamic_sections (output_bfd, info) bfd *output_bfd; struct bfd_link_info *info; { bfd *dynobj; asection *s; boolean plt; boolean relocs; boolean reltext; dynobj = elf_hash_table (info)->dynobj; BFD_ASSERT (dynobj != NULL); if (elf_hash_table (info)->dynamic_sections_created) { /* Set the contents of the .interp section to the interpreter. */ if (! info->shared) { s = bfd_get_section_by_name (dynobj, ".interp"); BFD_ASSERT (s != NULL); s->_raw_size = sizeof ELF_DYNAMIC_INTERPRETER; s->contents = (unsigned char *) ELF_DYNAMIC_INTERPRETER; } } else { /* We may have created entries in the .rel.got section. However, if we are not creating the dynamic sections, we will not actually use these entries. Reset the size of .rel.got, which will cause it to get stripped from the output file below. */ s = bfd_get_section_by_name (dynobj, ".rel.got"); if (s != NULL) s->_raw_size = 0; } /* If this is a -Bsymbolic shared link, then we need to discard all PC relative relocs against symbols defined in a regular object. We allocated space for them in the check_relocs routine, but we will not fill them in in the relocate_section routine. */ if (info->shared && info->symbolic) elf_i386_link_hash_traverse (elf_i386_hash_table (info), elf_i386_discard_copies, (PTR) NULL); /* The check_relocs and adjust_dynamic_symbol entry points have determined the sizes of the various dynamic sections. Allocate memory for them. */ plt = false; relocs = false; reltext = false; for (s = dynobj->sections; s != NULL; s = s->next) { const char *name; boolean strip; if ((s->flags & SEC_LINKER_CREATED) == 0) continue; /* It's OK to base decisions on the section name, because none of the dynobj section names depend upon the input files. */ name = bfd_get_section_name (dynobj, s); strip = false; if (strcmp (name, ".plt") == 0) { if (s->_raw_size == 0) { /* Strip this section if we don't need it; see the comment below. */ strip = true; } else { /* Remember whether there is a PLT. */ plt = true; } } else if (strncmp (name, ".rel", 4) == 0) { if (s->_raw_size == 0) { /* If we don't need this section, strip it from the output file. This is mostly to handle .rel.bss and .rel.plt. We must create both sections in create_dynamic_sections, because they must be created before the linker maps input sections to output sections. The linker does that before adjust_dynamic_symbol is called, and it is that function which decides whether anything needs to go into these sections. */ strip = true; } else { asection *target; /* Remember whether there are any reloc sections other than .rel.plt. */ if (strcmp (name, ".rel.plt") != 0) { const char *outname; relocs = true; /* If this relocation section applies to a read only section, then we probably need a DT_TEXTREL entry. The entries in the .rel.plt section really apply to the .got section, which we created ourselves and so know is not readonly. */ outname = bfd_get_section_name (output_bfd, s->output_section); target = bfd_get_section_by_name (output_bfd, outname + 4); if (target != NULL && (target->flags & SEC_READONLY) != 0) reltext = true; } /* We use the reloc_count field as a counter if we need to copy relocs into the output file. */ s->reloc_count = 0; } } else if (strncmp (name, ".got", 4) != 0) { /* It's not one of our sections, so don't allocate space. */ continue; } if (strip) { asection **spp; for (spp = &s->output_section->owner->sections; *spp != s->output_section; spp = &(*spp)->next) ; *spp = s->output_section->next; --s->output_section->owner->section_count; continue; } /* Allocate memory for the section contents. */ s->contents = (bfd_byte *) bfd_alloc (dynobj, s->_raw_size); if (s->contents == NULL && s->_raw_size != 0) return false; } if (elf_hash_table (info)->dynamic_sections_created) { /* Add some entries to the .dynamic section. We fill in the values later, in elf_i386_finish_dynamic_sections, but we must add the entries now so that we get the correct size for the .dynamic section. The DT_DEBUG entry is filled in by the dynamic linker and used by the debugger. */ if (! info->shared) { if (! bfd_elf32_add_dynamic_entry (info, DT_DEBUG, 0)) return false; } if (plt) { if (! bfd_elf32_add_dynamic_entry (info, DT_PLTGOT, 0) || ! bfd_elf32_add_dynamic_entry (info, DT_PLTRELSZ, 0) || ! bfd_elf32_add_dynamic_entry (info, DT_PLTREL, DT_REL) || ! bfd_elf32_add_dynamic_entry (info, DT_JMPREL, 0)) return false; } if (relocs) { if (! bfd_elf32_add_dynamic_entry (info, DT_REL, 0) || ! bfd_elf32_add_dynamic_entry (info, DT_RELSZ, 0) || ! bfd_elf32_add_dynamic_entry (info, DT_RELENT, sizeof (Elf32_External_Rel))) return false; } if (reltext) { if (! bfd_elf32_add_dynamic_entry (info, DT_TEXTREL, 0)) return false; } } return true; } /* This function is called via elf_i386_link_hash_traverse if we are creating a shared object with -Bsymbolic. It discards the space allocated to copy PC relative relocs against symbols which are defined in regular objects. We allocated space for them in the check_relocs routine, but we won't fill them in in the relocate_section routine. */ /*ARGSUSED*/ static boolean elf_i386_discard_copies (h, ignore) struct elf_i386_link_hash_entry *h; PTR ignore; { struct elf_i386_pcrel_relocs_copied *s; /* We only discard relocs for symbols defined in a regular object. */ if ((h->root.elf_link_hash_flags & ELF_LINK_HASH_DEF_REGULAR) == 0) return true; for (s = h->pcrel_relocs_copied; s != NULL; s = s->next) s->section->_raw_size -= s->count * sizeof (Elf32_External_Rel); return true; } /* Relocate an i386 ELF section. */ static boolean elf_i386_relocate_section (output_bfd, info, input_bfd, input_section, contents, relocs, local_syms, local_sections) bfd *output_bfd; struct bfd_link_info *info; bfd *input_bfd; asection *input_section; bfd_byte *contents; Elf_Internal_Rela *relocs; Elf_Internal_Sym *local_syms; asection **local_sections; { bfd *dynobj; Elf_Internal_Shdr *symtab_hdr; struct elf_link_hash_entry **sym_hashes; bfd_vma *local_got_offsets; asection *sgot; asection *splt; asection *sreloc; Elf_Internal_Rela *rel; Elf_Internal_Rela *relend; dynobj = elf_hash_table (info)->dynobj; symtab_hdr = &elf_tdata (input_bfd)->symtab_hdr; sym_hashes = elf_sym_hashes (input_bfd); local_got_offsets = elf_local_got_offsets (input_bfd); sgot = NULL; splt = NULL; sreloc = NULL; rel = relocs; relend = relocs + input_section->reloc_count; for (; rel < relend; rel++) { int r_type; reloc_howto_type *howto; unsigned long r_symndx; struct elf_link_hash_entry *h; Elf_Internal_Sym *sym; asection *sec; bfd_vma relocation; bfd_reloc_status_type r; r_type = ELF32_R_TYPE (rel->r_info); if (r_type < 0 || r_type >= (int) R_386_max || (r_type >= (int) FIRST_INVALID_RELOC && r_type <= (int) LAST_INVALID_RELOC)) { bfd_set_error (bfd_error_bad_value); return false; } howto = elf_howto_table + r_type; r_symndx = ELF32_R_SYM (rel->r_info); if (info->relocateable) { /* This is a relocateable link. We don't have to change anything, unless the reloc is against a section symbol, in which case we have to adjust according to where the section symbol winds up in the output section. */ if (r_symndx < symtab_hdr->sh_info) { sym = local_syms + r_symndx; if (ELF_ST_TYPE (sym->st_info) == STT_SECTION) { bfd_vma val; sec = local_sections[r_symndx]; val = bfd_get_32 (input_bfd, contents + rel->r_offset); val += sec->output_offset + sym->st_value; bfd_put_32 (input_bfd, val, contents + rel->r_offset); } } continue; } /* This is a final link. */ h = NULL; sym = NULL; sec = NULL; if (r_symndx < symtab_hdr->sh_info) { sym = local_syms + r_symndx; sec = local_sections[r_symndx]; relocation = (sec->output_section->vma + sec->output_offset + sym->st_value); } else { h = sym_hashes[r_symndx - symtab_hdr->sh_info]; while (h->root.type == bfd_link_hash_indirect || h->root.type == bfd_link_hash_warning) h = (struct elf_link_hash_entry *) h->root.u.i.link; if (h->root.type == bfd_link_hash_defined || h->root.type == bfd_link_hash_defweak) { sec = h->root.u.def.section; if (r_type == R_386_GOTPC || (r_type == R_386_PLT32 && h->plt_offset != (bfd_vma) -1) || (r_type == R_386_GOT32 && elf_hash_table (info)->dynamic_sections_created && (! info->shared || ! info->symbolic || (h->elf_link_hash_flags & ELF_LINK_HASH_DEF_REGULAR) == 0)) || (info->shared && (! info->symbolic || (h->elf_link_hash_flags & ELF_LINK_HASH_DEF_REGULAR) == 0) && (r_type == R_386_32 || r_type == R_386_PC32))) { /* In these cases, we don't need the relocation value. We check specially because in some obscure cases sec->output_section will be NULL. */ relocation = 0; } else if (sec->output_section == NULL) { (*_bfd_error_handler) ("%s: warning: unresolvable relocation against symbol `%s' from %s section", bfd_get_filename (input_bfd), h->root.root.string, bfd_get_section_name (input_bfd, input_section)); relocation = 0; } else relocation = (h->root.u.def.value + sec->output_section->vma + sec->output_offset); } else if (h->root.type == bfd_link_hash_undefweak) relocation = 0; else if (info->shared && !info->symbolic) relocation = 0; else { if (! ((*info->callbacks->undefined_symbol) (info, h->root.root.string, input_bfd, input_section, rel->r_offset))) return false; relocation = 0; } } switch (r_type) { case R_386_GOT32: /* Relocation is to the entry for this symbol in the global offset table. */ if (sgot == NULL) { sgot = bfd_get_section_by_name (dynobj, ".got"); BFD_ASSERT (sgot != NULL); } if (h != NULL) { bfd_vma off; off = h->got_offset; BFD_ASSERT (off != (bfd_vma) -1); if (! elf_hash_table (info)->dynamic_sections_created || (info->shared && info->symbolic && (h->elf_link_hash_flags & ELF_LINK_HASH_DEF_REGULAR))) { /* This is actually a static link, or it is a -Bsymbolic link and the symbol is defined locally. We must initialize this entry in the global offset table. Since the offset must always be a multiple of 4, we use the least significant bit to record whether we have initialized it already. When doing a dynamic link, we create a .rel.got relocation entry to initialize the value. This is done in the finish_dynamic_symbol routine. */ if ((off & 1) != 0) off &= ~1; else { bfd_put_32 (output_bfd, relocation, sgot->contents + off); h->got_offset |= 1; } } relocation = sgot->output_offset + off; } else { bfd_vma off; BFD_ASSERT (local_got_offsets != NULL && local_got_offsets[r_symndx] != (bfd_vma) -1); off = local_got_offsets[r_symndx]; /* The offset must always be a multiple of 4. We use the least significant bit to record whether we have already generated the necessary reloc. */ if ((off & 1) != 0) off &= ~1; else { bfd_put_32 (output_bfd, relocation, sgot->contents + off); if (info->shared) { asection *srelgot; Elf_Internal_Rel outrel; srelgot = bfd_get_section_by_name (dynobj, ".rel.got"); BFD_ASSERT (srelgot != NULL); outrel.r_offset = (sgot->output_section->vma + sgot->output_offset + off); outrel.r_info = ELF32_R_INFO (0, R_386_RELATIVE); bfd_elf32_swap_reloc_out (output_bfd, &outrel, (((Elf32_External_Rel *) srelgot->contents) + srelgot->reloc_count)); ++srelgot->reloc_count; } local_got_offsets[r_symndx] |= 1; } relocation = sgot->output_offset + off; } break; case R_386_GOTOFF: /* Relocation is relative to the start of the global offset table. */ if (sgot == NULL) { sgot = bfd_get_section_by_name (dynobj, ".got"); BFD_ASSERT (sgot != NULL); } /* Note that sgot->output_offset is not involved in this calculation. We always want the start of .got. If we defined _GLOBAL_OFFSET_TABLE in a different way, as is permitted by the ABI, we might have to change this calculation. */ relocation -= sgot->output_section->vma; break; case R_386_GOTPC: /* Use global offset table as symbol value. */ if (sgot == NULL) { sgot = bfd_get_section_by_name (dynobj, ".got"); BFD_ASSERT (sgot != NULL); } relocation = sgot->output_section->vma; break; case R_386_PLT32: /* Relocation is to the entry for this symbol in the procedure linkage table. */ /* Resolve a PLT32 reloc again a local symbol directly, without using the procedure linkage table. */ if (h == NULL) break; if (h->plt_offset == (bfd_vma) -1) { /* We didn't make a PLT entry for this symbol. This happens when statically linking PIC code, or when using -Bsymbolic. */ break; } if (splt == NULL) { splt = bfd_get_section_by_name (dynobj, ".plt"); BFD_ASSERT (splt != NULL); } relocation = (splt->output_section->vma + splt->output_offset + h->plt_offset); break; case R_386_32: case R_386_PC32: if (info->shared && (r_type != R_386_PC32 || (h != NULL && (! info->symbolic || (h->elf_link_hash_flags & ELF_LINK_HASH_DEF_REGULAR) == 0)))) { Elf_Internal_Rel outrel; boolean skip, relocate; /* When generating a shared object, these relocations are copied into the output file to be resolved at run time. */ if (sreloc == NULL) { const char *name; name = (bfd_elf_string_from_elf_section (input_bfd, elf_elfheader (input_bfd)->e_shstrndx, elf_section_data (input_section)->rel_hdr.sh_name)); if (name == NULL) return false; BFD_ASSERT (strncmp (name, ".rel", 4) == 0 && strcmp (bfd_get_section_name (input_bfd, input_section), name + 4) == 0); sreloc = bfd_get_section_by_name (dynobj, name); BFD_ASSERT (sreloc != NULL); } skip = false; if (elf_section_data (input_section)->stab_info == NULL) outrel.r_offset = rel->r_offset; else { bfd_vma off; off = (_bfd_stab_section_offset (output_bfd, &elf_hash_table (info)->stab_info, input_section, &elf_section_data (input_section)->stab_info, rel->r_offset)); if (off == (bfd_vma) -1) skip = true; outrel.r_offset = off; } outrel.r_offset += (input_section->output_section->vma + input_section->output_offset); if (skip) { memset (&outrel, 0, sizeof outrel); relocate = false; } else if (r_type == R_386_PC32) { BFD_ASSERT (h != NULL && h->dynindx != -1); relocate = false; outrel.r_info = ELF32_R_INFO (h->dynindx, R_386_PC32); } else { /* h->dynindx may be -1 if this symbol was marked to become local. */ if (h == NULL || ((info->symbolic || h->dynindx == -1) && (h->elf_link_hash_flags & ELF_LINK_HASH_DEF_REGULAR) != 0)) { relocate = true; outrel.r_info = ELF32_R_INFO (0, R_386_RELATIVE); } else { BFD_ASSERT (h->dynindx != -1); relocate = false; outrel.r_info = ELF32_R_INFO (h->dynindx, R_386_32); } } bfd_elf32_swap_reloc_out (output_bfd, &outrel, (((Elf32_External_Rel *) sreloc->contents) + sreloc->reloc_count)); ++sreloc->reloc_count; /* If this reloc is against an external symbol, we do not want to fiddle with the addend. Otherwise, we need to include the symbol value so that it becomes an addend for the dynamic reloc. */ if (! relocate) continue; } break; default: break; } r = _bfd_final_link_relocate (howto, input_bfd, input_section, contents, rel->r_offset, relocation, (bfd_vma) 0); if (r != bfd_reloc_ok) { switch (r) { default: case bfd_reloc_outofrange: abort (); case bfd_reloc_overflow: { const char *name; if (h != NULL) name = h->root.root.string; else { name = bfd_elf_string_from_elf_section (input_bfd, symtab_hdr->sh_link, sym->st_name); if (name == NULL) return false; if (*name == '\0') name = bfd_section_name (input_bfd, sec); } if (! ((*info->callbacks->reloc_overflow) (info, name, howto->name, (bfd_vma) 0, input_bfd, input_section, rel->r_offset))) return false; } break; } } } return true; } /* Finish up dynamic symbol handling. We set the contents of various dynamic sections here. */ static boolean elf_i386_finish_dynamic_symbol (output_bfd, info, h, sym) bfd *output_bfd; struct bfd_link_info *info; struct elf_link_hash_entry *h; Elf_Internal_Sym *sym; { bfd *dynobj; dynobj = elf_hash_table (info)->dynobj; if (h->plt_offset != (bfd_vma) -1) { asection *splt; asection *sgot; asection *srel; bfd_vma plt_index; bfd_vma got_offset; Elf_Internal_Rel rel; /* This symbol has an entry in the procedure linkage table. Set it up. */ BFD_ASSERT (h->dynindx != -1); splt = bfd_get_section_by_name (dynobj, ".plt"); sgot = bfd_get_section_by_name (dynobj, ".got.plt"); srel = bfd_get_section_by_name (dynobj, ".rel.plt"); BFD_ASSERT (splt != NULL && sgot != NULL && srel != NULL); /* Get the index in the procedure linkage table which corresponds to this symbol. This is the index of this symbol in all the symbols for which we are making plt entries. The first entry in the procedure linkage table is reserved. */ plt_index = h->plt_offset / PLT_ENTRY_SIZE - 1; /* Get the offset into the .got table of the entry that corresponds to this function. Each .got entry is 4 bytes. The first three are reserved. */ got_offset = (plt_index + 3) * 4; /* Fill in the entry in the procedure linkage table. */ if (! info->shared) { memcpy (splt->contents + h->plt_offset, elf_i386_plt_entry, PLT_ENTRY_SIZE); bfd_put_32 (output_bfd, (sgot->output_section->vma + sgot->output_offset + got_offset), splt->contents + h->plt_offset + 2); } else { memcpy (splt->contents + h->plt_offset, elf_i386_pic_plt_entry, PLT_ENTRY_SIZE); bfd_put_32 (output_bfd, got_offset, splt->contents + h->plt_offset + 2); } bfd_put_32 (output_bfd, plt_index * sizeof (Elf32_External_Rel), splt->contents + h->plt_offset + 7); bfd_put_32 (output_bfd, - (h->plt_offset + PLT_ENTRY_SIZE), splt->contents + h->plt_offset + 12); /* Fill in the entry in the global offset table. */ bfd_put_32 (output_bfd, (splt->output_section->vma + splt->output_offset + h->plt_offset + 6), sgot->contents + got_offset); /* Fill in the entry in the .rel.plt section. */ rel.r_offset = (sgot->output_section->vma + sgot->output_offset + got_offset); rel.r_info = ELF32_R_INFO (h->dynindx, R_386_JUMP_SLOT); bfd_elf32_swap_reloc_out (output_bfd, &rel, ((Elf32_External_Rel *) srel->contents + plt_index)); if ((h->elf_link_hash_flags & ELF_LINK_HASH_DEF_REGULAR) == 0) { /* Mark the symbol as undefined, rather than as defined in the .plt section. Leave the value alone. */ sym->st_shndx = SHN_UNDEF; } } if (h->got_offset != (bfd_vma) -1) { asection *sgot; asection *srel; Elf_Internal_Rel rel; /* This symbol has an entry in the global offset table. Set it up. */ BFD_ASSERT (h->dynindx != -1); sgot = bfd_get_section_by_name (dynobj, ".got"); srel = bfd_get_section_by_name (dynobj, ".rel.got"); BFD_ASSERT (sgot != NULL && srel != NULL); rel.r_offset = (sgot->output_section->vma + sgot->output_offset + (h->got_offset &~ 1)); /* If this is a -Bsymbolic link, and the symbol is defined locally, we just want to emit a RELATIVE reloc. The entry in the global offset table will already have been initialized in the relocate_section function. */ if (info->shared && info->symbolic && (h->elf_link_hash_flags & ELF_LINK_HASH_DEF_REGULAR)) rel.r_info = ELF32_R_INFO (0, R_386_RELATIVE); else { bfd_put_32 (output_bfd, (bfd_vma) 0, sgot->contents + h->got_offset); rel.r_info = ELF32_R_INFO (h->dynindx, R_386_GLOB_DAT); } bfd_elf32_swap_reloc_out (output_bfd, &rel, ((Elf32_External_Rel *) srel->contents + srel->reloc_count)); ++srel->reloc_count; } if ((h->elf_link_hash_flags & ELF_LINK_HASH_NEEDS_COPY) != 0) { asection *s; Elf_Internal_Rel rel; /* This symbol needs a copy reloc. Set it up. */ BFD_ASSERT (h->dynindx != -1 && (h->root.type == bfd_link_hash_defined || h->root.type == bfd_link_hash_defweak)); s = bfd_get_section_by_name (h->root.u.def.section->owner, ".rel.bss"); BFD_ASSERT (s != NULL); rel.r_offset = (h->root.u.def.value + h->root.u.def.section->output_section->vma + h->root.u.def.section->output_offset); rel.r_info = ELF32_R_INFO (h->dynindx, R_386_COPY); bfd_elf32_swap_reloc_out (output_bfd, &rel, ((Elf32_External_Rel *) s->contents + s->reloc_count)); ++s->reloc_count; } /* Mark _DYNAMIC and _GLOBAL_OFFSET_TABLE_ as absolute. */ if (strcmp (h->root.root.string, "_DYNAMIC") == 0 || strcmp (h->root.root.string, "_GLOBAL_OFFSET_TABLE_") == 0) sym->st_shndx = SHN_ABS; return true; } /* Finish up the dynamic sections. */ static boolean elf_i386_finish_dynamic_sections (output_bfd, info) bfd *output_bfd; struct bfd_link_info *info; { bfd *dynobj; asection *sgot; asection *sdyn; dynobj = elf_hash_table (info)->dynobj; sgot = bfd_get_section_by_name (dynobj, ".got.plt"); BFD_ASSERT (sgot != NULL); sdyn = bfd_get_section_by_name (dynobj, ".dynamic"); if (elf_hash_table (info)->dynamic_sections_created) { asection *splt; Elf32_External_Dyn *dyncon, *dynconend; splt = bfd_get_section_by_name (dynobj, ".plt"); BFD_ASSERT (splt != NULL && sdyn != NULL); dyncon = (Elf32_External_Dyn *) sdyn->contents; dynconend = (Elf32_External_Dyn *) (sdyn->contents + sdyn->_raw_size); for (; dyncon < dynconend; dyncon++) { Elf_Internal_Dyn dyn; const char *name; asection *s; bfd_elf32_swap_dyn_in (dynobj, dyncon, &dyn); switch (dyn.d_tag) { default: break; case DT_PLTGOT: name = ".got"; goto get_vma; case DT_JMPREL: name = ".rel.plt"; get_vma: s = bfd_get_section_by_name (output_bfd, name); BFD_ASSERT (s != NULL); dyn.d_un.d_ptr = s->vma; bfd_elf32_swap_dyn_out (output_bfd, &dyn, dyncon); break; case DT_PLTRELSZ: s = bfd_get_section_by_name (output_bfd, ".rel.plt"); BFD_ASSERT (s != NULL); if (s->_cooked_size != 0) dyn.d_un.d_val = s->_cooked_size; else dyn.d_un.d_val = s->_raw_size; bfd_elf32_swap_dyn_out (output_bfd, &dyn, dyncon); break; case DT_RELSZ: /* My reading of the SVR4 ABI indicates that the procedure linkage table relocs (DT_JMPREL) should be included in the overall relocs (DT_REL). This is what Solaris does. However, UnixWare can not handle that case. Therefore, we override the DT_RELSZ entry here to make it not include the JMPREL relocs. Since the linker script arranges for .rel.plt to follow all other relocation sections, we don't have to worry about changing the DT_REL entry. */ s = bfd_get_section_by_name (output_bfd, ".rel.plt"); if (s != NULL) { if (s->_cooked_size != 0) dyn.d_un.d_val -= s->_cooked_size; else dyn.d_un.d_val -= s->_raw_size; } bfd_elf32_swap_dyn_out (output_bfd, &dyn, dyncon); break; } } /* Fill in the first entry in the procedure linkage table. */ if (splt->_raw_size > 0) { if (info->shared) memcpy (splt->contents, elf_i386_pic_plt0_entry, PLT_ENTRY_SIZE); else { memcpy (splt->contents, elf_i386_plt0_entry, PLT_ENTRY_SIZE); bfd_put_32 (output_bfd, sgot->output_section->vma + sgot->output_offset + 4, splt->contents + 2); bfd_put_32 (output_bfd, sgot->output_section->vma + sgot->output_offset + 8, splt->contents + 8); } } /* UnixWare sets the entsize of .plt to 4, although that doesn't really seem like the right value. */ elf_section_data (splt->output_section)->this_hdr.sh_entsize = 4; } /* Fill in the first three entries in the global offset table. */ if (sgot->_raw_size > 0) { if (sdyn == NULL) bfd_put_32 (output_bfd, (bfd_vma) 0, sgot->contents); else bfd_put_32 (output_bfd, sdyn->output_section->vma + sdyn->output_offset, sgot->contents); bfd_put_32 (output_bfd, (bfd_vma) 0, sgot->contents + 4); bfd_put_32 (output_bfd, (bfd_vma) 0, sgot->contents + 8); } elf_section_data (sgot->output_section)->this_hdr.sh_entsize = 4; return true; } #define TARGET_LITTLE_SYM bfd_elf32_i386_vec #define TARGET_LITTLE_NAME "elf32-i386" #define ELF_ARCH bfd_arch_i386 #define ELF_MACHINE_CODE EM_386 #define ELF_MAXPAGESIZE 0x1000 #define elf_info_to_howto elf_i386_info_to_howto #define elf_info_to_howto_rel elf_i386_info_to_howto_rel #define bfd_elf32_bfd_reloc_type_lookup elf_i386_reloc_type_lookup #define bfd_elf32_bfd_is_local_label_name \ elf_i386_is_local_label_name #define elf_backend_create_dynamic_sections \ _bfd_elf_create_dynamic_sections #define bfd_elf32_bfd_link_hash_table_create \ elf_i386_link_hash_table_create #define elf_backend_check_relocs elf_i386_check_relocs #define elf_backend_adjust_dynamic_symbol \ elf_i386_adjust_dynamic_symbol #define elf_backend_size_dynamic_sections \ elf_i386_size_dynamic_sections #define elf_backend_relocate_section elf_i386_relocate_section #define elf_backend_finish_dynamic_symbol \ elf_i386_finish_dynamic_symbol #define elf_backend_finish_dynamic_sections \ elf_i386_finish_dynamic_sections #define elf_backend_want_got_plt 1 #define elf_backend_plt_readonly 1 #define elf_backend_want_plt_sym 0 #include "elf32-target.h"