/* Main header file for the bfd library -- portable access to object files. Copyright 1990, 1991, 1992, 1993 Free Software Foundation, Inc. Contributed by Cygnus Support. ** NOTE: bfd.h and bfd-in2.h are GENERATED files. Don't change them; ** instead, change bfd-in.h or the other BFD source files processed to ** generate these files. This file is part of BFD, the Binary File Descriptor library. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* bfd.h -- The only header file required by users of the bfd library The bfd.h file is generated from bfd-in.h and various .c files; if you change it, your changes will probably be lost. All the prototypes and definitions following the comment "THE FOLLOWING IS EXTRACTED FROM THE SOURCE" are extracted from the source files for BFD. If you change it, someone oneday will extract it from the source again, and your changes will be lost. To save yourself from this bind, change the definitions in the source in the bfd directory. Type "make docs" and then "make headers" in that directory, and magically this file will change to reflect your changes. If you don't have the tools to perform the extraction, then you are safe from someone on your system trampling over your header files. You should still maintain the equivalence between the source and this file though; every change you make to the .c file should be reflected here. */ #ifndef __BFD_H_SEEN__ #define __BFD_H_SEEN__ #include "ansidecl.h" #include "obstack.h" #define BFD_VERSION "2.2" #define BFD_ARCH_SIZE @WORDSIZE@ #if BFD_ARCH_SIZE >= 64 #define BFD64 #endif #ifndef INLINE #if __GNUC__ >= 2 #define INLINE __inline__ #else #define INLINE #endif #endif /* 64-bit type definition (if any) from bfd's sysdep.h goes here */ /* forward declaration */ typedef struct _bfd bfd; /* To squelch erroneous compiler warnings ("illegal pointer combination") from the SVR3 compiler, we would like to typedef boolean to int (it doesn't like functions which return boolean. Making sure they are never implicitly declared to return int doesn't seem to help). But this file is not configured based on the host. */ /* General rules: functions which are boolean return true on success and false on failure (unless they're a predicate). -- bfd.doc */ /* I'm sure this is going to break something and someone is going to force me to change it. */ /* typedef enum boolean {false, true} boolean; */ /* Yup, SVR4 has a "typedef enum boolean" in -fnf */ typedef enum bfd_boolean {false, true} boolean; /* A pointer to a position in a file. */ /* FIXME: This should be using off_t from . For now, try to avoid breaking stuff by not including here. This will break on systems with 64-bit file offsets (e.g. 4.4BSD). Probably the best long-term answer is to avoid using file_ptr AND off_t in this header file, and to handle this in the BFD implementation rather than in its interface. */ /* typedef off_t file_ptr; */ typedef long int file_ptr; /* Support for different sizes of target format ints and addresses. If the host implements 64-bit values, it defines HOST_64_BIT to be the appropriate type. Otherwise, this code will fall back on gcc's "long long" type if gcc is being used. HOST_64_BIT must be defined in such a way as to be a valid type name by itself or with "unsigned" prefixed. It should be a signed type by itself. If neither is the case, then compilation will fail if 64-bit targets are requested. If you don't request any 64-bit targets, you should be safe. */ #ifdef BFD64 #if defined (__GNUC__) && !defined (HOST_64_BIT) #define HOST_64_BIT long long typedef HOST_64_BIT int64_type; typedef unsigned HOST_64_BIT uint64_type; #endif #if !defined (uint64_type) && defined (__GNUC__) #define uint64_type unsigned long long #define int64_type long long #define uint64_typeLOW(x) (unsigned long)(((x) & 0xffffffff)) #define uint64_typeHIGH(x) (unsigned long)(((x) >> 32) & 0xffffffff) #endif typedef unsigned HOST_64_BIT bfd_vma; typedef HOST_64_BIT bfd_signed_vma; typedef unsigned HOST_64_BIT bfd_size_type; typedef unsigned HOST_64_BIT symvalue; #define fprintf_vma(s,x) \ fprintf(s,"%08x%08x", uint64_typeHIGH(x), uint64_typeLOW(x)) #define sprintf_vma(s,x) \ sprintf(s,"%08x%08x", uint64_typeHIGH(x), uint64_typeLOW(x)) #else /* not BFD64 */ /* Represent a target address. Also used as a generic unsigned type which is guaranteed to be big enough to hold any arithmetic types we need to deal with. */ typedef unsigned long bfd_vma; /* A generic signed type which is guaranteed to be big enough to hold any arithmetic types we need to deal with. Can be assumed to be compatible with bfd_vma in the same way that signed and unsigned ints are compatible (as parameters, in assignment, etc). */ typedef long bfd_signed_vma; typedef unsigned long symvalue; typedef unsigned long bfd_size_type; /* Print a bfd_vma x on stream s. */ #define fprintf_vma(s,x) fprintf(s, "%08lx", x) #define sprintf_vma(s,x) sprintf(s, "%08lx", x) #endif /* not BFD64 */ #define printf_vma(x) fprintf_vma(stdout,x) typedef unsigned int flagword; /* 32 bits of flags */ /** File formats */ typedef enum bfd_format { bfd_unknown = 0, /* file format is unknown */ bfd_object, /* linker/assember/compiler output */ bfd_archive, /* object archive file */ bfd_core, /* core dump */ bfd_type_end} /* marks the end; don't use it! */ bfd_format; /* Object file flag values */ #define NO_FLAGS 0x00 #define HAS_RELOC 0x01 #define EXEC_P 0x02 #define HAS_LINENO 0x04 #define HAS_DEBUG 0x08 #define HAS_SYMS 0x10 #define HAS_LOCALS 0x20 #define DYNAMIC 0x40 #define WP_TEXT 0x80 #define D_PAGED 0x100 #define BFD_IS_RELAXABLE 0x200 /* symbols and relocation */ typedef unsigned long symindex; #define BFD_NO_MORE_SYMBOLS ((symindex) ~0) typedef enum bfd_symclass { bfd_symclass_unknown = 0, bfd_symclass_fcommon, /* fortran common symbols */ bfd_symclass_global, /* global symbol, what a surprise */ bfd_symclass_debugger, /* some debugger symbol */ bfd_symclass_undefined /* none known */ } symclass; typedef int symtype; /* Who knows, yet? */ /* general purpose part of a symbol; target specific parts will be found in libcoff.h, liba.out.h etc */ #define bfd_get_section(x) ((x)->section) #define bfd_get_output_section(x) ((x)->section->output_section) #define bfd_set_section(x,y) ((x)->section) = (y) #define bfd_asymbol_base(x) ((x)->section->vma) #define bfd_asymbol_value(x) (bfd_asymbol_base(x) + (x)->value) #define bfd_asymbol_name(x) ((x)->name) /*Perhaps future: #define bfd_asymbol_bfd(x) ((x)->section->owner)*/ #define bfd_asymbol_bfd(x) ((x)->the_bfd) #define bfd_asymbol_flavour(x) (bfd_asymbol_bfd(x)->xvec->flavour) /* This is a type pun with struct ranlib on purpose! */ typedef struct carsym { char *name; file_ptr file_offset; /* look here to find the file */ } carsym; /* to make these you call a carsymogen */ /* Used in generating armaps. Perhaps just a forward definition would do? */ struct orl { /* output ranlib */ char **name; /* symbol name */ file_ptr pos; /* bfd* or file position */ int namidx; /* index into string table */ }; /* Linenumber stuff */ typedef struct lineno_cache_entry { unsigned int line_number; /* Linenumber from start of function*/ union { struct symbol_cache_entry *sym; /* Function name */ unsigned long offset; /* Offset into section */ } u; } alent; /* object and core file sections */ #define align_power(addr, align) \ ( ((addr) + ((1<<(align))-1)) & (-1 << (align))) typedef struct sec *sec_ptr; #define bfd_get_section_name(bfd, ptr) ((ptr)->name + 0) #define bfd_get_section_vma(bfd, ptr) ((ptr)->vma + 0) #define bfd_get_section_alignment(bfd, ptr) ((ptr)->alignment_power + 0) #define bfd_section_name(bfd, ptr) ((ptr)->name) #define bfd_section_size(bfd, ptr) (bfd_get_section_size_before_reloc(ptr)) #define bfd_section_vma(bfd, ptr) ((ptr)->vma) #define bfd_section_alignment(bfd, ptr) ((ptr)->alignment_power) #define bfd_get_section_flags(bfd, ptr) ((ptr)->flags + 0) #define bfd_get_section_userdata(bfd, ptr) ((ptr)->userdata) #define bfd_is_com_section(ptr) (((ptr)->flags & SEC_IS_COMMON) != 0) #define bfd_set_section_vma(bfd, ptr, val) (((ptr)->vma = (ptr)->lma= (val)), ((ptr)->user_set_vma = true), true) #define bfd_set_section_alignment(bfd, ptr, val) (((ptr)->alignment_power = (val)),true) #define bfd_set_section_userdata(bfd, ptr, val) (((ptr)->userdata = (val)),true) typedef struct stat stat_type; /** Error handling */ typedef enum bfd_error { no_error = 0, system_call_error, invalid_target, wrong_format, invalid_operation, no_memory, no_symbols, no_relocation_info, no_more_archived_files, malformed_archive, symbol_not_found, file_not_recognized, file_ambiguously_recognized, no_contents, bfd_error_nonrepresentable_section, no_debug_section, bad_value, /* An input file is shorter than expected. */ file_truncated, invalid_error_code} bfd_ec; extern bfd_ec bfd_error; struct reloc_cache_entry; struct bfd_seclet; typedef struct bfd_error_vector { void (* nonrepresentable_section ) PARAMS ((CONST bfd *CONST abfd, CONST char *CONST name)); void (* undefined_symbol) PARAMS ((CONST struct reloc_cache_entry *rel, CONST struct bfd_seclet *sec)); void (* reloc_value_truncated) PARAMS ((CONST struct reloc_cache_entry *rel, struct bfd_seclet *sec)); void (* reloc_dangerous) PARAMS ((CONST struct reloc_cache_entry *rel, CONST struct bfd_seclet *sec)); } bfd_error_vector_type; CONST char *bfd_errmsg PARAMS ((bfd_ec error_tag)); void bfd_perror PARAMS ((CONST char *message)); typedef enum bfd_print_symbol { bfd_print_symbol_name, bfd_print_symbol_more, bfd_print_symbol_all } bfd_print_symbol_type; /* Information about a symbol that nm needs. */ typedef struct _symbol_info { symvalue value; char type; /* */ CONST char *name; /* Symbol name. */ char stab_other; /* Unused. */ short stab_desc; /* Info for N_TYPE. */ CONST char *stab_name; } symbol_info; /* The code that implements targets can initialize a jump table with this macro. It must name all its routines the same way (a prefix plus the standard routine suffix), or it must #define the routines that are not so named, before calling JUMP_TABLE in the initializer. */ /* Semi-portable string concatenation in cpp. The CAT4 hack is to avoid a problem with some strict ANSI C preprocessors. The problem is, "32_" is not a valid preprocessing token, and we don't want extra underscores (e.g., "nlm_32_"). The XCAT2 macro will cause the inner CAT macros to be evaluated first, producing still-valid pp-tokens. Then the final concatenation can be done. (Sigh.) */ #ifndef CAT #ifdef SABER #define CAT(a,b) a##b #define CAT3(a,b,c) a##b##c #define CAT4(a,b,c,d) a##b##c##d #else #ifdef __STDC__ #define CAT(a,b) a##b #define CAT3(a,b,c) a##b##c #define XCAT2(a,b) CAT(a,b) #define CAT4(a,b,c,d) XCAT2(CAT(a,b),CAT(c,d)) #else #define CAT(a,b) a/**/b #define CAT3(a,b,c) a/**/b/**/c #define CAT4(a,b,c,d) a/**/b/**/c/**/d #endif #endif #endif #define JUMP_TABLE(NAME)\ CAT(NAME,_core_file_failing_command),\ CAT(NAME,_core_file_failing_signal),\ CAT(NAME,_core_file_matches_executable_p),\ CAT(NAME,_slurp_armap),\ CAT(NAME,_slurp_extended_name_table),\ CAT(NAME,_truncate_arname),\ CAT(NAME,_write_armap),\ CAT(NAME,_close_and_cleanup),\ CAT(NAME,_set_section_contents),\ CAT(NAME,_get_section_contents),\ CAT(NAME,_new_section_hook),\ CAT(NAME,_get_symtab_upper_bound),\ CAT(NAME,_get_symtab),\ CAT(NAME,_get_reloc_upper_bound),\ CAT(NAME,_canonicalize_reloc),\ CAT(NAME,_make_empty_symbol),\ CAT(NAME,_print_symbol),\ CAT(NAME,_get_symbol_info),\ CAT(NAME,_get_lineno),\ CAT(NAME,_set_arch_mach),\ CAT(NAME,_openr_next_archived_file),\ CAT(NAME,_find_nearest_line),\ CAT(NAME,_generic_stat_arch_elt),\ CAT(NAME,_sizeof_headers),\ CAT(NAME,_bfd_debug_info_start),\ CAT(NAME,_bfd_debug_info_end),\ CAT(NAME,_bfd_debug_info_accumulate),\ CAT(NAME,_bfd_get_relocated_section_contents),\ CAT(NAME,_bfd_relax_section),\ CAT(NAME,_bfd_seclet_link),\ CAT(NAME,_bfd_reloc_type_lookup),\ CAT(NAME,_bfd_make_debug_symbol) #define COFF_SWAP_TABLE (PTR) &bfd_coff_std_swap_table /* User program access to BFD facilities */ /* Cast from const char * to char * so that caller can assign to a char * without a warning. */ #define bfd_get_filename(abfd) ((char *) (abfd)->filename) #define bfd_get_format(abfd) ((abfd)->format) #define bfd_get_target(abfd) ((abfd)->xvec->name) #define bfd_get_file_flags(abfd) ((abfd)->flags) #define bfd_applicable_file_flags(abfd) ((abfd)->xvec->object_flags) #define bfd_applicable_section_flags(abfd) ((abfd)->xvec->section_flags) #define bfd_my_archive(abfd) ((abfd)->my_archive) #define bfd_has_map(abfd) ((abfd)->has_armap) #define bfd_valid_reloc_types(abfd) ((abfd)->xvec->valid_reloc_types) #define bfd_usrdata(abfd) ((abfd)->usrdata) #define bfd_get_start_address(abfd) ((abfd)->start_address) #define bfd_get_symcount(abfd) ((abfd)->symcount) #define bfd_get_outsymbols(abfd) ((abfd)->outsymbols) #define bfd_count_sections(abfd) ((abfd)->section_count) #define bfd_get_symbol_leading_char(abfd) ((abfd)->xvec->symbol_leading_char) /* And more from the source. */ void bfd_init PARAMS ((void)); bfd * bfd_openr PARAMS ((CONST char *filename, CONST char*target)); bfd * bfd_fdopenr PARAMS ((CONST char *filename, CONST char *target, int fd)); bfd * bfd_openw PARAMS ((CONST char *filename, CONST char *target)); boolean bfd_close PARAMS ((bfd *)); boolean bfd_close_all_done PARAMS ((bfd *)); bfd_size_type bfd_alloc_size PARAMS ((bfd *abfd)); bfd * bfd_create PARAMS ((CONST char *filename, bfd *templ)); /* Byte swapping macros for user section data. */ #define bfd_put_8(abfd, val, ptr) \ (*((unsigned char *)(ptr)) = (unsigned char)val) #define bfd_put_signed_8 \ bfd_put_8 #define bfd_get_8(abfd, ptr) \ (*(unsigned char *)(ptr)) #define bfd_get_signed_8(abfd, ptr) \ ((*(unsigned char *)(ptr) ^ 0x80) - 0x80) #define bfd_put_16(abfd, val, ptr) \ BFD_SEND(abfd, bfd_putx16, ((val),(ptr))) #define bfd_put_signed_16 \ bfd_put_16 #define bfd_get_16(abfd, ptr) \ BFD_SEND(abfd, bfd_getx16, (ptr)) #define bfd_get_signed_16(abfd, ptr) \ BFD_SEND (abfd, bfd_getx_signed_16, (ptr)) #define bfd_put_32(abfd, val, ptr) \ BFD_SEND(abfd, bfd_putx32, ((val),(ptr))) #define bfd_put_signed_32 \ bfd_put_32 #define bfd_get_32(abfd, ptr) \ BFD_SEND(abfd, bfd_getx32, (ptr)) #define bfd_get_signed_32(abfd, ptr) \ BFD_SEND(abfd, bfd_getx_signed_32, (ptr)) #define bfd_put_64(abfd, val, ptr) \ BFD_SEND(abfd, bfd_putx64, ((val), (ptr))) #define bfd_put_signed_64 \ bfd_put_64 #define bfd_get_64(abfd, ptr) \ BFD_SEND(abfd, bfd_getx64, (ptr)) #define bfd_get_signed_64(abfd, ptr) \ BFD_SEND(abfd, bfd_getx_signed_64, (ptr)) /* Byte swapping macros for file header data. */ #define bfd_h_put_8(abfd, val, ptr) \ bfd_put_8 (abfd, val, ptr) #define bfd_h_put_signed_8(abfd, val, ptr) \ bfd_put_8 (abfd, val, ptr) #define bfd_h_get_8(abfd, ptr) \ bfd_get_8 (abfd, ptr) #define bfd_h_get_signed_8(abfd, ptr) \ bfd_get_signed_8 (abfd, ptr) #define bfd_h_put_16(abfd, val, ptr) \ BFD_SEND(abfd, bfd_h_putx16,(val,ptr)) #define bfd_h_put_signed_16 \ bfd_h_put_16 #define bfd_h_get_16(abfd, ptr) \ BFD_SEND(abfd, bfd_h_getx16,(ptr)) #define bfd_h_get_signed_16(abfd, ptr) \ BFD_SEND(abfd, bfd_h_getx_signed_16, (ptr)) #define bfd_h_put_32(abfd, val, ptr) \ BFD_SEND(abfd, bfd_h_putx32,(val,ptr)) #define bfd_h_put_signed_32 \ bfd_h_put_32 #define bfd_h_get_32(abfd, ptr) \ BFD_SEND(abfd, bfd_h_getx32,(ptr)) #define bfd_h_get_signed_32(abfd, ptr) \ BFD_SEND(abfd, bfd_h_getx_signed_32, (ptr)) #define bfd_h_put_64(abfd, val, ptr) \ BFD_SEND(abfd, bfd_h_putx64,(val, ptr)) #define bfd_h_put_signed_64 \ bfd_h_put_64 #define bfd_h_get_64(abfd, ptr) \ BFD_SEND(abfd, bfd_h_getx64,(ptr)) #define bfd_h_get_signed_64(abfd, ptr) \ BFD_SEND(abfd, bfd_h_getx_signed_64, (ptr)) typedef struct sec { /* The name of the section, the name isn't a copy, the pointer is the same as that passed to bfd_make_section. */ CONST char *name; /* Which section is it 0.nth */ int index; /* The next section in the list belonging to the BFD, or NULL. */ struct sec *next; /* The field flags contains attributes of the section. Some of flags are read in from the object file, and some are synthesized from other information. */ flagword flags; #define SEC_NO_FLAGS 0x000 /* Tells the OS to allocate space for this section when loaded. This would clear for a section containing debug information only. */ #define SEC_ALLOC 0x001 /* Tells the OS to load the section from the file when loading. This would be clear for a .bss section */ #define SEC_LOAD 0x002 /* The section contains data still to be relocated, so there will be some relocation information too. */ #define SEC_RELOC 0x004 #if 0 /* Obsolete ? */ #define SEC_BALIGN 0x008 #endif /* A signal to the OS that the section contains read only data. */ #define SEC_READONLY 0x010 /* The section contains code only. */ #define SEC_CODE 0x020 /* The section contains data only. */ #define SEC_DATA 0x040 /* The section will reside in ROM. */ #define SEC_ROM 0x080 /* The section contains constructor information. This section type is used by the linker to create lists of constructors and destructors used by <>. When a back end sees a symbol which should be used in a constructor list, it creates a new section for the type of name (eg <<__CTOR_LIST__>>), attaches the symbol to it and builds a relocation. To build the lists of constructors, all the linker has to to is catenate all the sections called <<__CTOR_LIST__>> and relocte the data contained within - exactly the operations it would peform on standard data. */ #define SEC_CONSTRUCTOR 0x100 /* The section is a constuctor, and should be placed at the end of the text, data, or bss section(?). */ #define SEC_CONSTRUCTOR_TEXT 0x1100 #define SEC_CONSTRUCTOR_DATA 0x2100 #define SEC_CONSTRUCTOR_BSS 0x3100 /* The section has contents - a data section could be <> | <>, a debug section could be <> */ #define SEC_HAS_CONTENTS 0x200 /* An instruction to the linker not to output sections containing this flag even if they have information which would normally be written. */ #define SEC_NEVER_LOAD 0x400 /* The section is a shared library section. The linker must leave these completely alone, as the vma and size are used when the executable is loaded. */ #define SEC_SHARED_LIBRARY 0x800 /* The section is a common section (symbols may be defined multiple times, the value of a symbol is the amount of space it requires, and the largest symbol value is the one used). Most targets have exactly one of these (which we translate to bfd_com_section), but ECOFF has two. */ #define SEC_IS_COMMON 0x8000 /* End of section flags. */ /* The virtual memory address of the section - where it will be at run time. The symbols are relocated against this. The user_set_vma flag is maintained by bfd; if it's not set, the backend can assign addresses (for example, in <>, where the default address for <<.data>> is dependent on the specific target and various flags). */ bfd_vma vma; boolean user_set_vma; /* The load address of the section - where it would be in a rom image, really only used for writing section header information. */ bfd_vma lma; /* The size of the section in bytes, as it will be output. contains a value even if the section has no contents (eg, the size of <<.bss>>). This will be filled in after relocation */ bfd_size_type _cooked_size; /* The size on disk of the section in bytes originally. Normally this value is the same as the size, but if some relaxing has been done, then this value will be bigger. */ bfd_size_type _raw_size; /* If this section is going to be output, then this value is the offset into the output section of the first byte in the input section. Eg, if this was going to start at the 100th byte in the output section, this value would be 100. */ bfd_vma output_offset; /* The output section through which to map on output. */ struct sec *output_section; /* The alignment requirement of the section, as an exponent - eg 3 aligns to 2^3 (or 8) */ unsigned int alignment_power; /* If an input section, a pointer to a vector of relocation records for the data in this section. */ struct reloc_cache_entry *relocation; /* If an output section, a pointer to a vector of pointers to relocation records for the data in this section. */ struct reloc_cache_entry **orelocation; /* The number of relocation records in one of the above */ unsigned reloc_count; /* Information below is back end specific - and not always used or updated. */ /* File position of section data */ file_ptr filepos; /* File position of relocation info */ file_ptr rel_filepos; /* File position of line data */ file_ptr line_filepos; /* Pointer to data for applications */ PTR userdata; struct lang_output_section *otheruserdata; /* Attached line number information */ alent *lineno; /* Number of line number records */ unsigned int lineno_count; /* When a section is being output, this value changes as more linenumbers are written out */ file_ptr moving_line_filepos; /* what the section number is in the target world */ int target_index; PTR used_by_bfd; /* If this is a constructor section then here is a list of the relocations created to relocate items within it. */ struct relent_chain *constructor_chain; /* The BFD which owns the section. */ bfd *owner; boolean reloc_done; /* A symbol which points at this section only */ struct symbol_cache_entry *symbol; struct symbol_cache_entry **symbol_ptr_ptr; struct bfd_seclet *seclets_head; struct bfd_seclet *seclets_tail; } asection ; /* These sections are global, and are managed by BFD. The application and target back end are not permitted to change the values in these sections. */ #define BFD_ABS_SECTION_NAME "*ABS*" #define BFD_UND_SECTION_NAME "*UND*" #define BFD_COM_SECTION_NAME "*COM*" #define BFD_IND_SECTION_NAME "*IND*" /* the absolute section */ extern asection bfd_abs_section; /* Pointer to the undefined section */ extern asection bfd_und_section; /* Pointer to the common section */ extern asection bfd_com_section; /* Pointer to the indirect section */ extern asection bfd_ind_section; extern struct symbol_cache_entry *bfd_abs_symbol; extern struct symbol_cache_entry *bfd_com_symbol; extern struct symbol_cache_entry *bfd_und_symbol; extern struct symbol_cache_entry *bfd_ind_symbol; #define bfd_get_section_size_before_reloc(section) \ (section->reloc_done ? (abort(),1): (section)->_raw_size) #define bfd_get_section_size_after_reloc(section) \ ((section->reloc_done) ? (section)->_cooked_size: (abort(),1)) asection * bfd_get_section_by_name PARAMS ((bfd *abfd, CONST char *name)); asection * bfd_make_section_old_way PARAMS ((bfd *, CONST char *name)); asection * bfd_make_section PARAMS ((bfd *, CONST char *name)); boolean bfd_set_section_flags PARAMS ((bfd *, asection *, flagword)); void bfd_map_over_sections PARAMS ((bfd *abfd, void (*func)(bfd *abfd, asection *sect, PTR obj), PTR obj)); boolean bfd_set_section_size PARAMS ((bfd *, asection *, bfd_size_type val)); boolean bfd_set_section_contents PARAMS ((bfd *abfd, asection *section, PTR data, file_ptr offset, bfd_size_type count)); boolean bfd_get_section_contents PARAMS ((bfd *abfd, asection *section, PTR location, file_ptr offset, bfd_size_type count)); enum bfd_architecture { bfd_arch_unknown, /* File arch not known */ bfd_arch_obscure, /* Arch known, not one of these */ bfd_arch_m68k, /* Motorola 68xxx */ bfd_arch_vax, /* DEC Vax */ bfd_arch_i960, /* Intel 960 */ /* The order of the following is important. lower number indicates a machine type that only accepts a subset of the instructions available to machines with higher numbers. The exception is the "ca", which is incompatible with all other machines except "core". */ #define bfd_mach_i960_core 1 #define bfd_mach_i960_ka_sa 2 #define bfd_mach_i960_kb_sb 3 #define bfd_mach_i960_mc 4 #define bfd_mach_i960_xa 5 #define bfd_mach_i960_ca 6 bfd_arch_a29k, /* AMD 29000 */ bfd_arch_sparc, /* SPARC */ bfd_arch_mips, /* MIPS Rxxxx */ bfd_arch_i386, /* Intel 386 */ bfd_arch_we32k, /* AT&T WE32xxx */ bfd_arch_tahoe, /* CCI/Harris Tahoe */ bfd_arch_i860, /* Intel 860 */ bfd_arch_romp, /* IBM ROMP PC/RT */ bfd_arch_alliant, /* Alliant */ bfd_arch_convex, /* Convex */ bfd_arch_m88k, /* Motorola 88xxx */ bfd_arch_pyramid, /* Pyramid Technology */ bfd_arch_h8300, /* Hitachi H8/300 */ #define bfd_mach_h8300 1 #define bfd_mach_h8300h 2 bfd_arch_rs6000, /* IBM RS/6000 */ bfd_arch_hppa, /* HP PA RISC */ bfd_arch_z8k, /* Zilog Z8000 */ #define bfd_mach_z8001 1 #define bfd_mach_z8002 2 bfd_arch_h8500, /* Hitachi H8/500 */ bfd_arch_sh, /* Hitachi SH */ bfd_arch_alpha, /* Dec Alpha */ bfd_arch_last }; typedef struct bfd_arch_info { int bits_per_word; int bits_per_address; int bits_per_byte; enum bfd_architecture arch; long mach; char *arch_name; CONST char *printable_name; unsigned int section_align_power; /* true if this is the default machine for the architecture */ boolean the_default; CONST struct bfd_arch_info * (*compatible) PARAMS ((CONST struct bfd_arch_info *a, CONST struct bfd_arch_info *b)); boolean (*scan) PARAMS ((CONST struct bfd_arch_info *, CONST char *)); /* How to disassemble an instruction, producing a printable representation on a specified stdio stream. This isn't defined for most processors at present, because of the size of the additional tables it would drag in, and because gdb wants to use a different interface. */ unsigned int (*disassemble) PARAMS ((bfd_vma addr, CONST char *data, PTR stream)); struct bfd_arch_info *next; } bfd_arch_info_type; CONST char * bfd_printable_name PARAMS ((bfd *abfd)); bfd_arch_info_type * bfd_scan_arch PARAMS ((CONST char *)); CONST bfd_arch_info_type * bfd_arch_get_compatible PARAMS (( CONST bfd *abfd, CONST bfd *bbfd)); void bfd_set_arch_info PARAMS ((bfd *, bfd_arch_info_type *)); enum bfd_architecture bfd_get_arch PARAMS ((bfd *abfd)); unsigned long bfd_get_mach PARAMS ((bfd *abfd)); unsigned int bfd_arch_bits_per_byte PARAMS ((bfd *abfd)); unsigned int bfd_arch_bits_per_address PARAMS ((bfd *abfd)); bfd_arch_info_type * bfd_get_arch_info PARAMS ((bfd *)); bfd_arch_info_type * bfd_lookup_arch PARAMS ((enum bfd_architecture arch, long machine)); CONST char * bfd_printable_arch_mach PARAMS ((enum bfd_architecture arch, unsigned long machine)); typedef enum bfd_reloc_status { /* No errors detected */ bfd_reloc_ok, /* The relocation was performed, but there was an overflow. */ bfd_reloc_overflow, /* The address to relocate was not within the section supplied. */ bfd_reloc_outofrange, /* Used by special functions */ bfd_reloc_continue, /* Unused */ bfd_reloc_notsupported, /* Unsupported relocation size requested. */ bfd_reloc_other, /* The symbol to relocate against was undefined. */ bfd_reloc_undefined, /* The relocation was performed, but may not be ok - presently generated only when linking i960 coff files with i960 b.out symbols. */ bfd_reloc_dangerous } bfd_reloc_status_type; typedef struct reloc_cache_entry { /* A pointer into the canonical table of pointers */ struct symbol_cache_entry **sym_ptr_ptr; /* offset in section */ bfd_size_type address; /* addend for relocation value */ bfd_vma addend; /* Pointer to how to perform the required relocation */ CONST struct reloc_howto_struct *howto; } arelent; enum complain_overflow { /* Do not complain on overflow. */ complain_overflow_dont, /* Complain if the bitfield overflows, whether it is considered as signed or unsigned. */ complain_overflow_bitfield, /* Complain if the value overflows when considered as signed number. */ complain_overflow_signed, /* Complain if the value overflows when considered as an unsigned number. */ complain_overflow_unsigned }; typedef CONST struct reloc_howto_struct { /* The type field has mainly a documetary use - the back end can to what it wants with it, though the normally the back end's external idea of what a reloc number would be would be stored in this field. For example, the a PC relative word relocation in a coff environment would have the type 023 - because that's what the outside world calls a R_PCRWORD reloc. */ unsigned int type; /* The value the final relocation is shifted right by. This drops unwanted data from the relocation. */ unsigned int rightshift; /* The size of the item to be relocated - 0, is one byte, 1 is 2 bytes, 2 is four bytes. A negative value indicates that the result is to be subtracted from the data. */ int size; /* The number of bits in the item to be relocated. This is used when doing overflow checking. */ unsigned int bitsize; /* Notes that the relocation is relative to the location in the data section of the addend. The relocation function will subtract from the relocation value the address of the location being relocated. */ boolean pc_relative; /* The bit position of the reloc value in the destination. The relocated value is left shifted by this amount. */ unsigned int bitpos; /* What type of overflow error should be checked for when relocating. */ enum complain_overflow complain_on_overflow; /* If this field is non null, then the supplied function is called rather than the normal function. This allows really strange relocation methods to be accomodated (e.g., i960 callj instructions). */ bfd_reloc_status_type (*special_function) PARAMS ((bfd *abfd, arelent *reloc_entry, struct symbol_cache_entry *symbol, PTR data, asection *input_section, bfd *output_bfd)); /* The textual name of the relocation type. */ char *name; /* When performing a partial link, some formats must modify the relocations rather than the data - this flag signals this.*/ boolean partial_inplace; /* The src_mask is used to select what parts of the read in data are to be used in the relocation sum. E.g., if this was an 8 bit bit of data which we read and relocated, this would be 0x000000ff. When we have relocs which have an addend, such as sun4 extended relocs, the value in the offset part of a relocating field is garbage so we never use it. In this case the mask would be 0x00000000. */ bfd_vma src_mask; /* The dst_mask is what parts of the instruction are replaced into the instruction. In most cases src_mask == dst_mask, except in the above special case, where dst_mask would be 0x000000ff, and src_mask would be 0x00000000. */ bfd_vma dst_mask; /* When some formats create PC relative instructions, they leave the value of the pc of the place being relocated in the offset slot of the instruction, so that a PC relative relocation can be made just by adding in an ordinary offset (e.g., sun3 a.out). Some formats leave the displacement part of an instruction empty (e.g., m88k bcs), this flag signals the fact.*/ boolean pcrel_offset; } reloc_howto_type; #define HOWTO(C, R,S,B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \ {(unsigned)C,R,S,B, P, BI, O,SF,NAME,INPLACE,MASKSRC,MASKDST,PC} #define NEWHOWTO( FUNCTION, NAME,SIZE,REL,IN) HOWTO(0,0,SIZE,0,REL,0,complain_overflow_dont,FUNCTION, NAME,false,0,0,IN) #define HOWTO_PREPARE(relocation, symbol) \ { \ if (symbol != (asymbol *)NULL) { \ if (bfd_is_com_section (symbol->section)) { \ relocation = 0; \ } \ else { \ relocation = symbol->value; \ } \ } \ } typedef unsigned char bfd_byte; typedef struct relent_chain { arelent relent; struct relent_chain *next; } arelent_chain; bfd_reloc_status_type bfd_perform_relocation PARAMS ((bfd * abfd, arelent *reloc_entry, PTR data, asection *input_section, bfd *output_bfd)); typedef enum bfd_reloc_code_real { /* 64 bits wide, simple reloc */ BFD_RELOC_64, /* 64 bits, PC-relative */ BFD_RELOC_64_PCREL, /* 32 bits wide, simple reloc */ BFD_RELOC_32, /* 32 bits, PC-relative */ BFD_RELOC_32_PCREL, /* 16 bits wide, simple reloc */ BFD_RELOC_16, /* 16 bits, PC-relative */ BFD_RELOC_16_PCREL, /* 8 bits wide, simple */ BFD_RELOC_8, /* 8 bits wide, pc relative */ BFD_RELOC_8_PCREL, /* 8 bits wide, but used to form an address like 0xffnn */ BFD_RELOC_8_FFnn, /* The type of reloc used to build a contructor table - at the moment probably a 32 bit wide abs address, but the cpu can choose. */ BFD_RELOC_CTOR, /* High 22 bits of 32-bit value; simple reloc. */ BFD_RELOC_HI22, /* Low 10 bits. */ BFD_RELOC_LO10, /* Reloc types used for i960/b.out. */ BFD_RELOC_24_PCREL, BFD_RELOC_I960_CALLJ, /* 32-bit pc-relative, shifted right 2 bits (i.e., 30-bit word displacement, e.g. for SPARC) */ BFD_RELOC_32_PCREL_S2, /* now for the sparc/elf codes */ BFD_RELOC_NONE, /* actually used */ BFD_RELOC_SPARC_WDISP22, BFD_RELOC_SPARC22, BFD_RELOC_SPARC13, BFD_RELOC_SPARC_GOT10, BFD_RELOC_SPARC_GOT13, BFD_RELOC_SPARC_GOT22, BFD_RELOC_SPARC_PC10, BFD_RELOC_SPARC_PC22, BFD_RELOC_SPARC_WPLT30, BFD_RELOC_SPARC_COPY, BFD_RELOC_SPARC_GLOB_DAT, BFD_RELOC_SPARC_JMP_SLOT, BFD_RELOC_SPARC_RELATIVE, BFD_RELOC_SPARC_UA32, /* these are a.out specific? */ BFD_RELOC_SPARC_BASE13, BFD_RELOC_SPARC_BASE22, /* start-sanitize-v9 */ BFD_RELOC_SPARC_10, BFD_RELOC_SPARC_11, #define BFD_RELOC_SPARC_64 BFD_RELOC_64 BFD_RELOC_SPARC_OLO10, BFD_RELOC_SPARC_HH22, BFD_RELOC_SPARC_HM10, BFD_RELOC_SPARC_LM22, BFD_RELOC_SPARC_PC_HH22, BFD_RELOC_SPARC_PC_HM10, BFD_RELOC_SPARC_PC_LM22, BFD_RELOC_SPARC_WDISP16, BFD_RELOC_SPARC_WDISP19, BFD_RELOC_SPARC_GLOB_JMP, BFD_RELOC_SPARC_LO7, /* end-sanitize-v9 */ /* Bits 27..2 of the relocation address shifted right 2 bits; simple reloc otherwise. */ BFD_RELOC_MIPS_JMP, /* signed 16-bit pc-relative, shifted right 2 bits (e.g. for MIPS) */ BFD_RELOC_16_PCREL_S2, /* High 16 bits of 32-bit value; simple reloc. */ BFD_RELOC_HI16, /* High 16 bits of 32-bit value but the low 16 bits will be sign extended and added to form the final result. If the low 16 bits form a negative number, we need to add one to the high value to compensate for the borrow when the low bits are added. */ BFD_RELOC_HI16_S, /* Low 16 bits. */ BFD_RELOC_LO16, /* 16 bit relocation relative to the global pointer. */ BFD_RELOC_MIPS_GPREL, /* These are, so far, specific to HPPA processors. I'm not sure that some don't duplicate other reloc types, such as BFD_RELOC_32 and _32_PCREL. Also, many more were in the list I got that don't fit in well in the model BFD uses, so I've omitted them for now. If we do make this reloc type get used for code that really does implement the funky reloc types, they'll have to be added to this list. */ BFD_RELOC_HPPA_32, BFD_RELOC_HPPA_11, BFD_RELOC_HPPA_14, BFD_RELOC_HPPA_17, BFD_RELOC_HPPA_L21, BFD_RELOC_HPPA_R11, BFD_RELOC_HPPA_R14, BFD_RELOC_HPPA_R17, BFD_RELOC_HPPA_LS21, BFD_RELOC_HPPA_RS11, BFD_RELOC_HPPA_RS14, BFD_RELOC_HPPA_RS17, BFD_RELOC_HPPA_LD21, BFD_RELOC_HPPA_RD11, BFD_RELOC_HPPA_RD14, BFD_RELOC_HPPA_RD17, BFD_RELOC_HPPA_LR21, BFD_RELOC_HPPA_RR14, BFD_RELOC_HPPA_RR17, BFD_RELOC_HPPA_GOTOFF_11, BFD_RELOC_HPPA_GOTOFF_14, BFD_RELOC_HPPA_GOTOFF_L21, BFD_RELOC_HPPA_GOTOFF_R11, BFD_RELOC_HPPA_GOTOFF_R14, BFD_RELOC_HPPA_GOTOFF_LS21, BFD_RELOC_HPPA_GOTOFF_RS11, BFD_RELOC_HPPA_GOTOFF_RS14, BFD_RELOC_HPPA_GOTOFF_LD21, BFD_RELOC_HPPA_GOTOFF_RD11, BFD_RELOC_HPPA_GOTOFF_RD14, BFD_RELOC_HPPA_GOTOFF_LR21, BFD_RELOC_HPPA_GOTOFF_RR14, BFD_RELOC_HPPA_DLT_32, BFD_RELOC_HPPA_DLT_11, BFD_RELOC_HPPA_DLT_14, BFD_RELOC_HPPA_DLT_L21, BFD_RELOC_HPPA_DLT_R11, BFD_RELOC_HPPA_DLT_R14, BFD_RELOC_HPPA_ABS_CALL_11, BFD_RELOC_HPPA_ABS_CALL_14, BFD_RELOC_HPPA_ABS_CALL_17, BFD_RELOC_HPPA_ABS_CALL_L21, BFD_RELOC_HPPA_ABS_CALL_R11, BFD_RELOC_HPPA_ABS_CALL_R14, BFD_RELOC_HPPA_ABS_CALL_R17, BFD_RELOC_HPPA_ABS_CALL_LS21, BFD_RELOC_HPPA_ABS_CALL_RS11, BFD_RELOC_HPPA_ABS_CALL_RS14, BFD_RELOC_HPPA_ABS_CALL_RS17, BFD_RELOC_HPPA_ABS_CALL_LD21, BFD_RELOC_HPPA_ABS_CALL_RD11, BFD_RELOC_HPPA_ABS_CALL_RD14, BFD_RELOC_HPPA_ABS_CALL_RD17, BFD_RELOC_HPPA_ABS_CALL_LR21, BFD_RELOC_HPPA_ABS_CALL_RR14, BFD_RELOC_HPPA_ABS_CALL_RR17, BFD_RELOC_HPPA_PCREL_CALL_11, BFD_RELOC_HPPA_PCREL_CALL_12, BFD_RELOC_HPPA_PCREL_CALL_14, BFD_RELOC_HPPA_PCREL_CALL_17, BFD_RELOC_HPPA_PCREL_CALL_L21, BFD_RELOC_HPPA_PCREL_CALL_R11, BFD_RELOC_HPPA_PCREL_CALL_R14, BFD_RELOC_HPPA_PCREL_CALL_R17, BFD_RELOC_HPPA_PCREL_CALL_LS21, BFD_RELOC_HPPA_PCREL_CALL_RS11, BFD_RELOC_HPPA_PCREL_CALL_RS14, BFD_RELOC_HPPA_PCREL_CALL_RS17, BFD_RELOC_HPPA_PCREL_CALL_LD21, BFD_RELOC_HPPA_PCREL_CALL_RD11, BFD_RELOC_HPPA_PCREL_CALL_RD14, BFD_RELOC_HPPA_PCREL_CALL_RD17, BFD_RELOC_HPPA_PCREL_CALL_LR21, BFD_RELOC_HPPA_PCREL_CALL_RR14, BFD_RELOC_HPPA_PCREL_CALL_RR17, BFD_RELOC_HPPA_PLABEL_32, BFD_RELOC_HPPA_PLABEL_11, BFD_RELOC_HPPA_PLABEL_14, BFD_RELOC_HPPA_PLABEL_L21, BFD_RELOC_HPPA_PLABEL_R11, BFD_RELOC_HPPA_PLABEL_R14, BFD_RELOC_HPPA_UNWIND_ENTRY, BFD_RELOC_HPPA_UNWIND_ENTRIES, /* i386/elf relocations */ BFD_RELOC_386_GOT32, BFD_RELOC_386_PLT32, BFD_RELOC_386_COPY, BFD_RELOC_386_GLOB_DAT, BFD_RELOC_386_JUMP_SLOT, BFD_RELOC_386_RELATIVE, BFD_RELOC_386_GOTOFF, BFD_RELOC_386_GOTPC, /* this must be the highest numeric value */ BFD_RELOC_UNUSED } bfd_reloc_code_real_type; CONST struct reloc_howto_struct * bfd_reloc_type_lookup PARAMS ((bfd *abfd, bfd_reloc_code_real_type code)); typedef struct symbol_cache_entry { /* A pointer to the BFD which owns the symbol. This information is necessary so that a back end can work out what additional information (invisible to the application writer) is carried with the symbol. This field is *almost* redundant, since you can use section->owner instead, except that some symbols point to the global sections bfd_{abs,com,und}_section. This could be fixed by making these globals be per-bfd (or per-target-flavor). FIXME. */ struct _bfd *the_bfd; /* Use bfd_asymbol_bfd(sym) to access this field. */ /* The text of the symbol. The name is left alone, and not copied - the application may not alter it. */ CONST char *name; /* The value of the symbol. This really should be a union of a numeric value with a pointer, since some flags indicate that a pointer to another symbol is stored here. */ symvalue value; /* Attributes of a symbol: */ #define BSF_NO_FLAGS 0x00 /* The symbol has local scope; <> in <>. The value is the offset into the section of the data. */ #define BSF_LOCAL 0x01 /* The symbol has global scope; initialized data in <>. The value is the offset into the section of the data. */ #define BSF_GLOBAL 0x02 /* The symbol has global scope, and is exported. The value is the offset into the section of the data. */ #define BSF_EXPORT BSF_GLOBAL /* no real difference */ /* A normal C symbol would be one of: <>, <>, <> or <> */ /* The symbol is a debugging record. The value has an arbitary meaning. */ #define BSF_DEBUGGING 0x08 /* The symbol denotes a function entry point. Used in ELF, perhaps others someday. */ #define BSF_FUNCTION 0x10 /* Used by the linker. */ #define BSF_KEEP 0x20 #define BSF_KEEP_G 0x40 /* A weak global symbol, overridable without warnings by a regular global symbol of the same name. */ #define BSF_WEAK 0x80 /* This symbol was created to point to a section, e.g. ELF's STT_SECTION symbols. */ #define BSF_SECTION_SYM 0x100 /* The symbol used to be a common symbol, but now it is allocated. */ #define BSF_OLD_COMMON 0x200 /* The default value for common data. */ #define BFD_FORT_COMM_DEFAULT_VALUE 0 /* In some files the type of a symbol sometimes alters its location in an output file - ie in coff a <> symbol which is also <> symbol appears where it was declared and not at the end of a section. This bit is set by the target BFD part to convey this information. */ #define BSF_NOT_AT_END 0x400 /* Signal that the symbol is the label of constructor section. */ #define BSF_CONSTRUCTOR 0x800 /* Signal that the symbol is a warning symbol. If the symbol is a warning symbol, then the value field (I know this is tacky) will point to the asymbol which when referenced will cause the warning. */ #define BSF_WARNING 0x1000 /* Signal that the symbol is indirect. The value of the symbol is a pointer to an undefined asymbol which contains the name to use instead. */ #define BSF_INDIRECT 0x2000 /* BSF_FILE marks symbols that contain a file name. This is used for ELF STT_FILE symbols. */ #define BSF_FILE 0x4000 flagword flags; /* A pointer to the section to which this symbol is relative. This will always be non NULL, there are special sections for undefined and absolute symbols */ struct sec *section; /* Back end special data. This is being phased out in favour of making this a union. */ PTR udata; } asymbol; #define get_symtab_upper_bound(abfd) \ BFD_SEND (abfd, _get_symtab_upper_bound, (abfd)) #define bfd_canonicalize_symtab(abfd, location) \ BFD_SEND (abfd, _bfd_canonicalize_symtab,\ (abfd, location)) boolean bfd_set_symtab PARAMS ((bfd *, asymbol **, unsigned int )); void bfd_print_symbol_vandf PARAMS ((PTR file, asymbol *symbol)); #define bfd_make_empty_symbol(abfd) \ BFD_SEND (abfd, _bfd_make_empty_symbol, (abfd)) #define bfd_make_debug_symbol(abfd,ptr,size) \ BFD_SEND (abfd, _bfd_make_debug_symbol, (abfd, ptr, size)) int bfd_decode_symclass PARAMS ((asymbol *symbol)); void bfd_symbol_info PARAMS ((asymbol *symbol, symbol_info *ret)); struct _bfd { /* The filename the application opened the BFD with. */ CONST char *filename; /* A pointer to the target jump table. */ struct bfd_target *xvec; /* To avoid dragging too many header files into every file that includes `<>', IOSTREAM has been declared as a "char *", and MTIME as a "long". Their correct types, to which they are cast when used, are "FILE *" and "time_t". The iostream is the result of an fopen on the filename. */ char *iostream; /* Is the file being cached */ boolean cacheable; /* Marks whether there was a default target specified when the BFD was opened. This is used to select what matching algorithm to use to chose the back end. */ boolean target_defaulted; /* The caching routines use these to maintain a least-recently-used list of BFDs */ struct _bfd *lru_prev, *lru_next; /* When a file is closed by the caching routines, BFD retains state information on the file here: */ file_ptr where; /* and here:*/ boolean opened_once; /* Set if we have a locally maintained mtime value, rather than getting it from the file each time: */ boolean mtime_set; /* File modified time, if mtime_set is true: */ long mtime; /* Reserved for an unimplemented file locking extension.*/ int ifd; /* The format which belongs to the BFD.*/ bfd_format format; /* The direction the BFD was opened with*/ enum bfd_direction {no_direction = 0, read_direction = 1, write_direction = 2, both_direction = 3} direction; /* Format_specific flags*/ flagword flags; /* Currently my_archive is tested before adding origin to anything. I believe that this can become always an add of origin, with origin set to 0 for non archive files. */ file_ptr origin; /* Remember when output has begun, to stop strange things happening. */ boolean output_has_begun; /* Pointer to linked list of sections*/ struct sec *sections; /* The number of sections */ unsigned int section_count; /* Stuff only useful for object files: The start address. */ bfd_vma start_address; /* Used for input and output*/ unsigned int symcount; /* Symbol table for output BFD*/ struct symbol_cache_entry **outsymbols; /* Pointer to structure which contains architecture information*/ struct bfd_arch_info *arch_info; /* Stuff only useful for archives:*/ PTR arelt_data; struct _bfd *my_archive; struct _bfd *next; struct _bfd *archive_head; boolean has_armap; /* Used by the back end to hold private data. */ union { struct aout_data_struct *aout_data; struct artdata *aout_ar_data; struct _oasys_data *oasys_obj_data; struct _oasys_ar_data *oasys_ar_data; struct coff_tdata *coff_obj_data; struct ecoff_tdata *ecoff_obj_data; struct ieee_data_struct *ieee_data; struct ieee_ar_data_struct *ieee_ar_data; struct srec_data_struct *srec_data; struct tekhex_data_struct *tekhex_data; struct elf_obj_tdata *elf_obj_data; struct nlm_obj_tdata *nlm_obj_data; struct bout_data_struct *bout_data; struct sun_core_struct *sun_core_data; struct trad_core_struct *trad_core_data; struct hppa_data_struct *hppa_data; struct hpux_core_struct *hpux_core_data; struct sgi_core_struct *sgi_core_data; PTR any; } tdata; /* Used by the application to hold private data*/ PTR usrdata; /* Where all the allocated stuff under this BFD goes */ struct obstack memory; /* Is this really needed in addition to usrdata? */ asymbol **ld_symbols; }; unsigned int bfd_get_reloc_upper_bound PARAMS ((bfd *abfd, asection *sect)); unsigned int bfd_canonicalize_reloc PARAMS ((bfd *abfd, asection *sec, arelent **loc, asymbol **syms)); boolean bfd_set_file_flags PARAMS ((bfd *abfd, flagword flags)); void bfd_set_reloc PARAMS ((bfd *abfd, asection *sec, arelent **rel, unsigned int count) ); boolean bfd_set_start_address PARAMS ((bfd *, bfd_vma)); long bfd_get_mtime PARAMS ((bfd *)); long bfd_get_size PARAMS ((bfd *)); int bfd_get_gp_size PARAMS ((bfd *)); void bfd_set_gp_size PARAMS ((bfd *, int)); bfd_vma bfd_scan_vma PARAMS ((CONST char *string, CONST char **end, int base)); #define bfd_sizeof_headers(abfd, reloc) \ BFD_SEND (abfd, _bfd_sizeof_headers, (abfd, reloc)) #define bfd_find_nearest_line(abfd, sec, syms, off, file, func, line) \ BFD_SEND (abfd, _bfd_find_nearest_line, (abfd, sec, syms, off, file, func, line)) /* Do these three do anything useful at all, for any back end? */ #define bfd_debug_info_start(abfd) \ BFD_SEND (abfd, _bfd_debug_info_start, (abfd)) #define bfd_debug_info_end(abfd) \ BFD_SEND (abfd, _bfd_debug_info_end, (abfd)) #define bfd_debug_info_accumulate(abfd, section) \ BFD_SEND (abfd, _bfd_debug_info_accumulate, (abfd, section)) #define bfd_stat_arch_elt(abfd, stat) \ BFD_SEND (abfd, _bfd_stat_arch_elt,(abfd, stat)) #define bfd_set_arch_mach(abfd, arch, mach)\ BFD_SEND ( abfd, _bfd_set_arch_mach, (abfd, arch, mach)) #define bfd_get_relocated_section_contents(abfd, seclet, data, relocateable) \ BFD_SEND (abfd, _bfd_get_relocated_section_contents, (abfd, seclet, data, relocateable)) #define bfd_relax_section(abfd, section, symbols) \ BFD_SEND (abfd, _bfd_relax_section, (abfd, section, symbols)) #define bfd_seclet_link(abfd, data, relocateable) \ BFD_SEND (abfd, _bfd_seclet_link, (abfd, data, relocateable)) symindex bfd_get_next_mapent PARAMS ((bfd *, symindex previous, carsym ** sym)); boolean bfd_set_archive_head PARAMS ((bfd *output, bfd *new_head)); bfd * bfd_get_elt_at_index PARAMS ((bfd * archive, int index)); bfd* bfd_openr_next_archived_file PARAMS ((bfd *archive, bfd *previous)); CONST char * bfd_core_file_failing_command PARAMS ((bfd *)); int bfd_core_file_failing_signal PARAMS ((bfd *)); boolean core_file_matches_executable_p PARAMS ((bfd *core_bfd, bfd *exec_bfd)); #define BFD_SEND(bfd, message, arglist) \ ((*((bfd)->xvec->message)) arglist) #define BFD_SEND_FMT(bfd, message, arglist) \ (((bfd)->xvec->message[(int)((bfd)->format)]) arglist) typedef struct bfd_target { char *name; enum target_flavour { bfd_target_unknown_flavour, bfd_target_aout_flavour, bfd_target_coff_flavour, bfd_target_ecoff_flavour, bfd_target_elf_flavour, bfd_target_ieee_flavour, bfd_target_nlm_flavour, bfd_target_oasys_flavour, bfd_target_tekhex_flavour, bfd_target_srec_flavour, bfd_target_hppa_flavour} flavour; boolean byteorder_big_p; boolean header_byteorder_big_p; flagword object_flags; flagword section_flags; char symbol_leading_char; char ar_pad_char; unsigned short ar_max_namelen; unsigned int align_power_min; bfd_vma (*bfd_getx64) PARAMS ((bfd_byte *)); bfd_signed_vma (*bfd_getx_signed_64) PARAMS ((bfd_byte *)); void (*bfd_putx64) PARAMS ((bfd_vma, bfd_byte *)); bfd_vma (*bfd_getx32) PARAMS ((bfd_byte *)); bfd_signed_vma (*bfd_getx_signed_32) PARAMS ((bfd_byte *)); void (*bfd_putx32) PARAMS ((bfd_vma, bfd_byte *)); bfd_vma (*bfd_getx16) PARAMS ((bfd_byte *)); bfd_signed_vma (*bfd_getx_signed_16) PARAMS ((bfd_byte *)); void (*bfd_putx16) PARAMS ((bfd_vma, bfd_byte *)); bfd_vma (*bfd_h_getx64) PARAMS ((bfd_byte *)); bfd_signed_vma (*bfd_h_getx_signed_64) PARAMS ((bfd_byte *)); void (*bfd_h_putx64) PARAMS ((bfd_vma, bfd_byte *)); bfd_vma (*bfd_h_getx32) PARAMS ((bfd_byte *)); bfd_signed_vma (*bfd_h_getx_signed_32) PARAMS ((bfd_byte *)); void (*bfd_h_putx32) PARAMS ((bfd_vma, bfd_byte *)); bfd_vma (*bfd_h_getx16) PARAMS ((bfd_byte *)); bfd_signed_vma (*bfd_h_getx_signed_16) PARAMS ((bfd_byte *)); void (*bfd_h_putx16) PARAMS ((bfd_vma, bfd_byte *)); struct bfd_target * (*_bfd_check_format[bfd_type_end]) PARAMS ((bfd *)); boolean (*_bfd_set_format[bfd_type_end]) PARAMS ((bfd *)); boolean (*_bfd_write_contents[bfd_type_end]) PARAMS ((bfd *)); char * (*_core_file_failing_command) PARAMS ((bfd *)); int (*_core_file_failing_signal) PARAMS ((bfd *)); boolean (*_core_file_matches_executable_p) PARAMS ((bfd *, bfd *)); boolean (*_bfd_slurp_armap) PARAMS ((bfd *)); boolean (*_bfd_slurp_extended_name_table) PARAMS ((bfd *)); void (*_bfd_truncate_arname) PARAMS ((bfd *, CONST char *, char *)); boolean (*write_armap) PARAMS ((bfd *arch, unsigned int elength, struct orl *map, unsigned int orl_count, int stridx)); boolean (*_close_and_cleanup) PARAMS ((bfd *)); boolean (*_bfd_set_section_contents) PARAMS ((bfd *, sec_ptr, PTR, file_ptr, bfd_size_type)); boolean (*_bfd_get_section_contents) PARAMS ((bfd *, sec_ptr, PTR, file_ptr, bfd_size_type)); boolean (*_new_section_hook) PARAMS ((bfd *, sec_ptr)); unsigned int (*_get_symtab_upper_bound) PARAMS ((bfd *)); unsigned int (*_bfd_canonicalize_symtab) PARAMS ((bfd *, struct symbol_cache_entry **)); unsigned int (*_get_reloc_upper_bound) PARAMS ((bfd *, sec_ptr)); unsigned int (*_bfd_canonicalize_reloc) PARAMS ((bfd *, sec_ptr, arelent **, struct symbol_cache_entry **)); struct symbol_cache_entry * (*_bfd_make_empty_symbol) PARAMS ((bfd *)); void (*_bfd_print_symbol) PARAMS ((bfd *, PTR, struct symbol_cache_entry *, bfd_print_symbol_type)); #define bfd_print_symbol(b,p,s,e) BFD_SEND(b, _bfd_print_symbol, (b,p,s,e)) void (*_bfd_get_symbol_info) PARAMS ((bfd *, struct symbol_cache_entry *, symbol_info *)); #define bfd_get_symbol_info(b,p,e) BFD_SEND(b, _bfd_get_symbol_info, (b,p,e)) alent * (*_get_lineno) PARAMS ((bfd *, struct symbol_cache_entry *)); boolean (*_bfd_set_arch_mach) PARAMS ((bfd *, enum bfd_architecture, unsigned long)); bfd * (*openr_next_archived_file) PARAMS ((bfd *arch, bfd *prev)); boolean (*_bfd_find_nearest_line) PARAMS ((bfd *abfd, struct sec *section, struct symbol_cache_entry **symbols, bfd_vma offset, CONST char **file, CONST char **func, unsigned int *line)); int (*_bfd_stat_arch_elt) PARAMS ((bfd *, struct stat *)); int (*_bfd_sizeof_headers) PARAMS ((bfd *, boolean)); void (*_bfd_debug_info_start) PARAMS ((bfd *)); void (*_bfd_debug_info_end) PARAMS ((bfd *)); void (*_bfd_debug_info_accumulate) PARAMS ((bfd *, struct sec *)); bfd_byte * (*_bfd_get_relocated_section_contents) PARAMS ((bfd *, struct bfd_seclet *, bfd_byte *data, boolean relocateable)); boolean (*_bfd_relax_section) PARAMS ((bfd *, struct sec *, struct symbol_cache_entry **)); boolean (*_bfd_seclet_link) PARAMS ((bfd *, PTR data, boolean relocateable)); /* See documentation on reloc types. */ CONST struct reloc_howto_struct * (*reloc_type_lookup) PARAMS ((bfd *abfd, bfd_reloc_code_real_type code)); /* Back-door to allow format-aware applications to create debug symbols while using BFD for everything else. Currently used by the assembler when creating COFF files. */ asymbol * (*_bfd_make_debug_symbol) PARAMS (( bfd *abfd, void *ptr, unsigned long size)); PTR backend_data; } bfd_target; bfd_target * bfd_find_target PARAMS ((CONST char *, bfd *)); CONST char ** bfd_target_list PARAMS ((void)); boolean bfd_check_format PARAMS ((bfd *abfd, bfd_format format)); boolean bfd_set_format PARAMS ((bfd *, bfd_format)); CONST char * bfd_format_string PARAMS ((bfd_format)); #endif