Mon Aug 14 11:39:24 1995 Ian Lance Taylor * aoutx.h (NAME(aout,machine_type)): Handle a machine of bfd_mach_sparc or bfd_mach_sparc64. * elflink.h (elf_link_add_object_symbols): If a symbol is a weak definition, add it to the dynamic symbol table if any dynamic object mentions it. If we do add it, make sure we add the corresponding real symbol. (elf_adjust_dynamic_symbol): Adjust a weak defined symbol which we put in the dynamic symbol table, even if no regular object refers to it. * elf32-i386.c (elf_i386_check_relocs): When creating a shared library, don't allocate space for a PC relative reloc against a local symbol. * elf32-m68k.c (elf_m68k_check_relocs): Likewise. * elf32-sparc.c (elf32_sparc_check_relocs): Likewise. * elf32-i386.c (elf_i386_adjust_dynamic_symbol): Change assertion to accept symbol with weakdef set. * elf32-m68k.c (elf_m68k_adjust_dynamic_symbol): Likewise. * elf32-sparc.c (elf32_sparc_adjust_dynamic_symbol): Likewise. * elf32-m68k.c (elf_m68k_relocate_section): When creating a shared libary, don't copy over a PC relative reloc against a local symbol. * elf32-sparc.c (elf32_sparc_relocate_section): Likewise. Sun Aug 13 00:40:58 1995 Jeff Law (law@snake.cs.utah.edu) * som.h (R_HPPA_BEGIN_BRTAB): Define. (R_HPPA_END_BRTAB): Likewise. * som.c (som_write_fixups): Handle R_BEGIN_BRTAB and R_END_BRTAB. Thu Aug 10 15:53:29 1995 Ian Lance Taylor * coffswap.h (coff_swap_aux_in): Swap the array dimensions whenever x_fcnary is not being used for something else, rather than only for an array. (coff_swap_aux_out): Likewise. Tue Aug 8 16:34:57 1995 steve chamberlain * cofflink.c (_bfd_coff_generic_relocate_section): Remove most of special case stuff for PE. Now handled by relocs. * coff-i386.c (coff_i386_reloc): Special case of PE type 7s. (howto_table): Type 7 is dir32-rva. Tue Aug 8 10:15:43 1995 Jeffrey A. Law * configure.host: Recognize aix4 explicitly. * rs6000-core.c (CORE_DATA_SIZE_FIELD): New macro to get a the size of a core dump's data section. Provide alternate definition for aix4. (SAVE_FIELD): Similarly for save state field (register info). (STACK_END_ADDR): Provide definition suitable for aix4. * config/{aix4.mh,aix4.mt}: New configuration files. * hosts/aix4.h: Likewise. Mon Aug 7 23:03:21 1995 Ian Lance Taylor * som.c (som_bfd_copy_private_symbol_data): Cast initializations to avoid warnings. Mon Aug 7 14:51:08 1995 Jeff Law (law@snake.cs.utah.edu) * som.c (som_decode_symclass): Handle absolute symbols by checking the SOM type (since they will rarely if ever be in the absolute section). Wed Aug 6 09:12:50 1995 Doug Evans * archures.c (bfd_mach_sparc, bfd_mach_sparc64): Define. * bfd-in2.h: Regenerated. * cpu-sparc.c (sparc_arch_info): Renamed from arch_info_struct. (sparc64_arch_info): New static variable. (bfd_sparc_arch): Link in sparc64_arch_info. * elf64-sparc.c (sparc64_elf_xxx): Renamed from elf64_xxx. (sparc64_elf_object_p): New static function. (elf_backend_object_p): Define. * config/sparc64-elf.mt (SELECT_VECS): Add bfd_elf32_sparc_vec. Sat Aug 5 00:04:08 1995 Jeff Law (law@snake.cs.utah.edu) * som (som_get_reloc_upper_bound): Return -1 on error. Compute return value with sizeof (arelent *), not sizeof (arelent). Wed Aug 2 12:32:21 1995 Ian Lance Taylor * elf.c (bfd_section_from_shdr): If the section pointed to by the sh_link field of a reloc section is not a symbol table, and the file contains a single symbol table, clobber the sh_link field of the reloc section to point to the symbol table. Tue Aug 1 10:09:01 1995 Doug Evans * coff-arm.c (howto reloc ARM26): Change size from 3 to 2. (howto reloc ARM26D): Likewise. Mon Jul 24 14:17:50 1995 Ian Lance Taylor * aoutx.h (NAME(aout,find_nearest_line)): Use the line just before the offset, not the one just after. Break out of the loop after finding a function past the offset, not merely when finding a function with a line defined. * ecofflink.c (_bfd_ecoff_locate_line): When handling stabs: correct setting of sym_ptr_end to consider symbols skipped when setting sym_ptr; don't leave loop early unless an N_FUN is found with a larger value. * coff-sh.c (sh_coff_howtos): Mark R_SH_PCDISP8BY2 and R_SH_PCDISP as PC relative. Describe R_SH_IMM16. Add entries for R_SH_SWITCH16, R_SH_SWITCH32, R_SH_USES, R_SH_COUNT, and R_SH_ALIGN. (SWAP_IN_RELOC_OFFSET): Define. (SWAP_OUT_RELOC_OFFSET): Define. (CALC_ADDEND): Define. (sh_reloc): Change sym_value and addr to type bfd_vma. Skip reloc types other than R_SH_IMM32 and R_SH_PCDISP on an external symbol. (coff_bfd_relax_section): Define. (coff_bfd_get_relocated_section_contents): Define. (sh_relax_section): New static function. (sh_relax_delete_bytes): New static function. (sh_relocate_section): Handle R_SH_PCDISP on an external symbol. (sh_coff_get_relocated_section_contents): New static function. * cofflink.c (coff_link_add_object_symbols): Call _bfd_coff_get_external_symbols, not coff_link_get_symbols. Call _bfd_coff_free_symbols, not coff_link_free_symbols. Call _bfd_coff_read_string_table, not coff_read_string_table. (coff_link_check_archive_element): Likewise. (coff_link_input_bfd): Likewise. (coff_link_get_symbols): Move to coffgen.c. (coff_read_string_table): Likewise. (coff_link_free_symbols): Likewise. (_bfd_coff_internal_syment_name): New static function. (coff_link_check_ar_symbols): Use _bfd_coff_internal_syment_name. (coff_link_add_symbols): Likewise. (coff_link_input_bfd): Likewise. (_bfd_coff_generic_relocate_section): Likewise. (_bfd_coff_read_internal_relocs): New function. (coff_link_input_bfd): Use cached section contents if available. Use _bfd_coff_read_internal_relocs. * coffcode.h (coff_slurp_symbol_table): Don't call bfd_seek. (coff_bfd_get_relocated_section_contents): Only define if not already defined. (coff_bfd_relax_section): Likewise. * coffgen.c (build_string_table): Remove. (_bfd_coff_get_external_symbols): New function, moved in from old coff_link_get_symbols in cofflink.c. (_bfd_coff_read_string_table): New function, moved in from old coff_read_string_table in cofflink.c. (_bfd_coff_free_symbols): New function, moved in frmo old coff_link_free_symbols in cofflink.c. (coff_get_normalized_symtab): Use _bfd_coff_get_external_symbols rather than reading the symbols directly. To free them, call _bfd_coff_free_symbols. Use _bfd_coff_read_string_table rather than build_string_table. * libcoff-in.h (obj_coff_keep_syms): Define. (obj_coff_keep_strings): Define. (coff_data_type): Add fields keep_syms and keep_strings. (coff_section_tdata): Define new structure. (coff_section_data): Define. (_bfd_coff_get_external_symbols): Declare. (_bfd_coff_read_string_table): Declare. (_bfd_coff_free_symbols): Declare. (_bfd_coff_read_internal_relocs): Declare. * libcoff.h: Rebuild. Fri Jul 21 22:32:54 1995 Michael Meissner * elf32-ppc.c (ppc_elf_howto_raw): Add support for R_PPC_SDAREL relocation. (ppc_elf_reloc_type_lookup): Ditto. (ppc_elf_got16_inner): Ditto. (ppc_elf_relocate_section): Ditto. Thu Jul 20 19:19:06 1995 Jeff Law (law@snake.cs.utah.edu) * elf32-hppa.c (hppa_elf_gen_reloc_type): Add new (ignored) argument. * elf32-hppa.h: Corresponding change. Thu Jul 20 19:01:07 1995 Ken Raeburn * libaout.h (set_aout_section_data): New macro. * sunos.c (sunos_scan_relocs): Use it. * aout-ns32k.c (MY_swap_std_reloc_out): Undef KEEPIT before defining it. Thu Jul 20 13:48:00 1995 Fred Fish * hosts/i386v4.h (getgid, getuid): Change prototypes to be compatible with Unixware 1.x and Unixware 2.x, and probably other i386 svr4 versions as well. Thu Jul 20 13:41:21 1995 Ken Raeburn * targets.c (bfd_target_vector): Since armpe and armpei have been split into big- and little-endian variants, list all of them, instead of the now-nonexistant armpe[i]_vec. Thu Jul 20 00:06:39 1995 Ian Lance Taylor * elf.c (bfd_section_from_phdr): Set lma based on p_paddr. (elf_fake_sections): Set sh_addr based on lma, not vma. Wed Jul 19 15:52:01 1995 Doug Evans * coff-arm.c (TARGET_LITTLE_SYM, TARGET_BIG_SYM): Replaces TARGET_SYM. * configure.in (armpe_vec, armpei_vec): Add bi-endian support. * configure: "regenerated". * pe-arm.c (TARGET_LITTLE_SYM, TARGET_BIG_SYM): Replaces TARGET_SYM. (TARGET_LITTLE_NAME, TARGET_BIG_NAME): Replaces TARGET_NAME. * pei-arm.c (TARGET_LITTLE_SYM, TARGET_BIG_SYM): Replaces TARGET_SYM. (TARGET_LITTLE_NAME, TARGET_BIG_NAME): Replaces TARGET_NAME. * targets.c (armpe_vec, armpei_vec): Deleted. (armpe_little_vec, armpe_big_vec, armpei_little_vec, armpei_big_vec): Added. * config/arm-pe.mt (DEFAULT_VECTOR): Default is armpe_little_vec. (SELECT_VECS): Add bi-endian support. Wed Jul 19 10:47:25 1995 Ian Lance Taylor * coff-sh.c: Clean up and comment. (r_imm32): Remove. (sh_coff_howtos): New static array. (SH_COFF_HOWTO_COUNT): Define. (get_symbol_value): Make relocation bfd_vma rather than long. (RTYPE2HOWTO): Rewrite to use sh_coff_howtos. (coff_relocate_section): Define to sh_relocate_section. (sh_relocate_section): New static function. Sat Jul 15 01:02:53 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * configure.host: Add support for generic m68k SVR4 host. Fri Jul 14 13:13:55 1995 Ian Lance Taylor * aoutx.h (KEEPIT): Change definition to udata.i. (KEEPITTYPE): Remove. (NAME(aout,reloc_type_lookup)): Add cases to the extended reloc type switch: SPARC_GOT10, SPARC_GOT13, SPARC_GOT22, SPARC_PC10, SPARC_PC22, SPARC_WPLT30. (NAME(aout,swap_std_reloc_out)): Don't bother to use stoi when retrieving KEEPIT value. (NAME(aout,swap_ext_reloc_out)): Likewise. Also, only add in output section VMA for section symbols, and check BSF_SECTION_SYM to control whether to set r_extern to 1. * syms.c: Fix comments so that `make info' works. * elf32-mips.c (mips_elf_find_nearest_line): Set SEC_HAS_CONTENTS in .mdebug section, in case backend linker has cleared it. Fri Jul 14 11:58:34 1995 Michael Meissner * elf32-ppc.c (ppc_elf_addr16_ha_inner): Rewrite to take just one argument, the final relocated address. (ppc_elf_addr16_ha_inner): Adjust ppc_elf_addr16_ha_inner caller. (ppc_elf_relocate_section): Ditto. Thu Jul 13 17:22:03 1995 Jeff Law (law@snake.cs.utah.edu) * som.c (hppa_som_gen_reloc_type): Choose a reasonable field selector relocation for the difference of two symbols. Thu Jul 13 10:33:25 1995 Ian Lance Taylor * aoutx.h (NAME(aout,slurp_reloc_table)): Cast argument to size_t for malloc. * coff-mips.c (mips_relocate_section): Likewise, for memmove. (mips_relax_section): Likewise, for malloc. * cofflink.c (process_embedded_commands): Likewise. (_bfd_coff_final_link): Likewise. * ecoff.c (_bfd_ecoff_write_object_contents): Likewise. (ecoff_final_link_debug_accumulate): Likewise. (ecoff_indirect_link_order): Likewise, for memcpy and malloc. (ecoff_reloc_link_order): Likewise, for malloc. * ecofflink.c (ecoff_align_debug): Likewise, for memset. (ecoff_write_symhdr): Likewise, for malloc. * elf32-hppa.c (elf32_hppa_read_symext_info): Likewise. * elf.c (assign_file_positions_except_relocs): Likewise, for qsort. * elf32-mips.c (mips_elf_read_ecoff_info): Likewise, for malloc. * elfcode.h (elf_slurp_reloc_table): Likewise. * elfcore.h (elf_corefile_note): Likewise. * elflink.h (elf_link_add_object_symbols): Likewise. (elf_link_read_relocs): Likewise. (NAME(bfd_elf,size_dynamic_sections)): Likewise, for memset. * i386linux.c (bfd_linux_size_dynamic_sections): Likewise. * ieee.c (do_with_relocs): Likewise. * linker.c (default_indirect_link_order): Likewise, for malloc. * nlmcode.h (nlm_object_p): Likewise. (nlm_write_object_contents): Likewise. * oasys.c (oasys_set_section_contents): Likewise, for memcpy. * reloc.c (bfd_generic_get_relocated_section_contents): Likewise, for malloc. * section.c (bfd_get_section_contents): Likewise, for memcpy. * srec.c (srec_get_section_contents): Likewise. (srec_set_section_contents): Likewise. * sunos.c (bfd_sunos_size_dynamic_sections): Likewise, for realloc and memset. (sunos_scan_relocs): Likewise, for malloc. (sunos_scan_dynamic_symbol): Likewise, for realloc. * syms.c (_bfd_generic_read_minisymbols): Likewise, for malloc. * versados.c (versados_get_section_contents): Likewise, for memcpy. * libbfd.c (real_read): Add prototype. Change argument types from int to size_t. (bfd_read): Cast real_read argument to size_t, not int. (bfd_write): Cast fwrite argument to size_t, not int. * elf64-gen.c (elf_info_to_howto): Fix definition for recent elf.c changes. * configure.in: Fix typo: change {$enableval} to ${enableval}. * configure: Rebuild. * Makefile.in (BFD32_BACKENDS): Add elflink.o. * targets.c (bfd_target): Add fields _read_minisymbols and _minisymbol_to_symbol. (BFD_JUMP_TABLE_SYMBOLS): Add _read_minisymbols and _minisymbol_to_symbol. (bfd_read_minisymbols): Define. (bfd_minisymbol_to_symbol): Define. * syms.c (_bfd_generic_read_minisymbols): Define. (_bfd_generic_minisymbol_to_symbol): Define. * libbfd-in.h (_bfd_nosymbols_read_minisymbols): Define. (_bfd_nosymbols_minisymbol_to_symbol): Define. (_bfd_generic_read_minisymbols): Declare. (_bfd_generic_minisymbol_to_symbol): Declare. * bfd-in2.h: Rebuild. * libbfd.h: Rebuild. * aoutx.h (MINISYM_THRESHOLD): Define. (NAME(aout,read_minisymbols)): New function. (NAME(aout,minisymbol_to_symbol)): New function. * libaout.h (NAME(aout,read_minisymbols)): Declare. (NAME(aout,minisymbol_to_symbol)): Declare. * aout-target.h (MY_read_minisymbols): Define. (MY_minisymbol_to_symbol): Define. * All targets: Define read_minisymbols and minisymbol_to_symbol. Wed Jul 12 17:55:55 1995 Ken Raeburn * elflink.h (elf_link_add_object_symbols): Cast return value from bfd_alloc. * elfcode.h (size_info): Don't use "&" before function names. Wed Jul 12 00:16:48 1995 Ken Raeburn * libelf.h (elf_backend_data): Use unsigned, not unsigned char, for bitfields. Tue Jul 11 15:19:53 1995 Ian Lance Taylor * elf.c (bfd_section_from_shdr): In case SHT_REL[A], only get the BFD section for the sh_link section if it is a SYMTAB section. * aoutx.h (NAME(aout,link_add_symbols)): Don't bother to check that archives hold a.out objects. * cf-i386lynx.c (coff_bfd_link_add_symbols): Don't define. (lynx_link_add_symbols): Remove. * cf-m68klynx.c (coff_bfd_link_add_symbols): Don't define. (lynx_link_add_symbols): Remove. * elflink.h (elf_bfd_link_add_symbols): Don't bother to check that archives hold ELF objects. * archive.c (bfd_generic_archive_p): If the archive has a map, and the target was defaulted, but the first object in the archive can not be matched with that target, then return a bad format error. * elf64-sparc.c (elf_sparc_howto_table): Set howto for WDISP16 to elf64_wdisp16_reloc. (elf64_wdisp16_reloc): New static function. (elf64_sparc_relocate_section): New static function. (elf_backend_relocate_section): Define. * libelf.h (struct elf_size_info): Change type of last argument to swap_symbol_out from char * to PTR. (bfd_elf32_swap_symbol_out): Update declaration. (bfd_elf64_swap_symbol_out): Likewise. * elfcode.h (elf_swap_symbol_out): Change type of cdst from char * to PTR. * elf.c (swap_out_syms): Cast to PTR, not char *, when calling swap_symbol_out routine. * elflink.h (NAME(bfd_elf,size_dynamic_sections)): Likewise. (elf_link_output_sym): Likewise. (elf_link_output_extsym): Likewise. * elf32-sparc.c (elf32_sparc_finish_dynamic_sections): Likewise. Tue Jul 11 12:29:49 1995 Rick Sladkey * elf.c (_bfd_elf_find_nearest_line): Handle the simple case where there is no debugging information. Mon Jul 10 11:45:55 1995 Ken Raeburn * makefile.dos (OBJS): Add binary.o and tekhex.o. From DJ Delorie. Mon Jul 10 11:09:58 1995 Ian Lance Taylor * linker.c (set_symbol_from_hash): bfd_link_hash_new case: Don't abort; it can happen for constructor symbols when not building constructors. * coff-i960.c (coff_i960_relocate): Correct typo: use ! on strcmp, not on string. * cofflink.c (_bfd_coff_generic_relocate_section): Remove unused local i. * coff-arm.c (coff_arm_rtype_to_howto): Don't declare. (PCRELOFFSET): Define if not already defined. * Makefile.in: Rebuild dependencies. (BFD32_BACKENDS): Add coff-arm.o (CFILES): Add coff-arm.c, pe-arm.c, pei-arm.c. * aoutx.h (NAME(aout,link_hash_table_create)): Allocate hash table using bfd_alloc, not malloc. * cofflink.c (_bfd_coff_link_hash_table_create): Likewise. * ecoff.c (_bfd_ecoff_bfd_link_hash_table_create): Likewise. * i386linux.c (linux_link_hash_table_create): Likewise. * linker.c (_bfd_generic_link_hash_table_create): Likewise. * sunos.c (sunos_link_hash_table_create): Likewise. Based on patches from Eric Youngdale : * elflink.h (NAME(bfd_elf,size_dynamic_sections)): If -Bsymbolic, output a DT_SYMBOLIC dynamic entry. (elf_adjust_dynamic_symbol): If -Bsymbolic, don't require a PLT entry for a locally defined symbol. * elf32-i386.c (elf_i386_relocate_section): If -Bsymbolic, do warn about undefined symbols, and fill in the GOT entry for a symbol defined in a regular object file. (elf_i386_finish_dynamic_symbol): If -Bsymbolic, output a RELATIVE reloc rather than a GLOB_DAT reloc for a symbol defined in a regular object file. * elf32-m68k.c (elf_m68k_relocate_section): If -Bsymbolic, do warn about undefined symbols, and fill in the GOT entry for a symbol defined in a regular object file. (elf_m68k_finish_dynamic_symbol): If -Bsymbolic, output a RELATIVE reloc rather than a GLOB_DAT reloc for a symbol defined in a regular object file. * elf32-sparc.c (elf32_sparc_relocate_section): If -Bsymbolic, do warn about undefined symbols, and fill in the GOT entry for a symbol defined in a regular object file. (elf32_sparc_finish_dynamic_symbol): If -Bsymbolic, output a RELATIVE reloc rather than a GLOB_DAT reloc for a symbol defined in a regular object file. * config/m68k-coff.mt (SELECT_VECS): Rename from SELECT_VECTORS. Correct elements to be actual BFD vector names. * Makefile.in (Makefile): Don't depend upon @frags@. (config.status): Depend upon @frags@. Fri Jul 7 17:36:44 1995 Ian Lance Taylor * coffgen.c (coff_renumber_symbols): Sort defined symbols that are neither BSF_FUNCTION not BSF_NOT_AT_END just before undefined symbols. * coffcode.h (coff_slurp_symbol_table): Set BSF_FUNCTION as well as BSF_NOT_AT_END. Fri Jul 7 17:16:15 1995 Ken Raeburn * Makefile.in (do_mostlyclean): Remove config.log. (do_distclean): Remove config.cache. Thu Jul 6 14:37:43 1995 Ian Lance Taylor * elf32-i386.c (elf_i386_relocate_section): Revert May 24 patch. Don't copy PC32 reloc against section into shared object. * Makefile.in: Rebuild dependencies. (CFILES): Added elflink.c. (Makefile): Depend upon config.status, not configure.in. (config.status): New target; depend upon configure configure.host and config.bfd. Wed Jul 5 20:17:14 1995 Ken Raeburn * elfcore.h, elflink.h, elfcode.h, elf.c, elflink.c: Moved some primarily size-independent code from elfcode.h to elf.c and new file elflink.c; moved out other core- or linker-related routines into other new .h files for clarity. Renamed many routines to start with bfd_elf or _bfd_elf. Added a structure of size-dependent but target-independent info to elfcode.h. * Makefile.in: Build elflink.o. Update dependencies. * libelf.h: Updated some declarations. Added a definition for the new structure in elfcode.h. Added more fields to elf backend data structure. * elfxx-target.h: Refer to the appropriate size-dependent info. * elf32-*.c: Changed some function names. Moved common create_dynamic_sections code from m68k, sparc, and i386 support into elflink.c. Define some new macros to fill in new fields of back end data. Also clean up some "gcc -Wall" warnings regarding unused or uninitialized variables. * Makefile.in (BFD_LIBS): No, don't put elflink.o here. * configure.in: Include it here whenever elf.o is specified. Wed Jul 5 10:31:47 1995 Ian Lance Taylor * elf32-mips.c (mips_elf_object_p): Unconditionally set elf_bad_symtab, since sometimes the symbol table is messed up and the last symbol is global. * ecoff.c (_bfd_ecoff_bfd_is_local_label): New function. * libecoff.h (_bfd_ecoff_bfd_is_local_label): Declare. * elf32-mips.c (mips_elf_is_local_label): New static function. (bfd_elf32_bfd_is_local_label): Define. * configure.in: Use $ac_config_sub, not $configsub. * configure: Likewise. Permit --enable-targets=ieee: * config.bfd (*-*-ieee*): New target. * config/ieee.mt: New file. Wed Jul 5 04:16:35 1995 Ken Raeburn * config/i386aix.mh (HDEFINES): Remove -DFASCIST_FDOPEN. Autoconfiscation: * configure.in, Makefile.in, doc/Makefile.in: Switch from Cygnus configure to autoconf ways of processing --enable arguments, setting up symlinks, incorporating makefile fragments, printing messages at configuration time, setting variables in Makefile. Deleted some unused variables. Check for ranlib via autoconf. For now, configure script removes doc/config.status. * configure: New file. * dep-in.sed: Use @SRCDIR@ instead of @srcdir@, so Makefile.in line doesn't get broken by configure. * doc/configure.in: Removed. Tue Jul 4 12:22:21 1995 Ian Lance Taylor * archive.c (_bfd_construct_extended_name_table): If BFD_TRADITIONAL_FORMAT is set, limit the length of all file names to ar_max_namelen. (bfd_dont_truncate_arname): If BFD_TRADITIONAL_FORMAT is set, call bfd_bsd_truncate_arname. (_bfd_write_archive_contents): Revert June 1 change. * elfcode.h (NAME(bfd_elf,record_link_assignment)): Add provide argument. * bfd-in.h (bfd_elf32_record_link_assignment): Update prototype. (bfd_elf64_record_link_assignment): Likewise. * bfd-in2.h: Rebuild. * libelf.h (struct elf_link_hash_table): Add needed field. Remove saw_needed field. * elfcode.h (elf_link_add_object_symbols): If elf_dt_needed_name is an empty string, don't make a DT_NEEDED entry in the output file. Record all DT_NEEDED entries found in input dynamic objects. (elf_link_output_extsym): Don't check saw_needed when issuing warnings. * elf.c (_bfd_elf_link_hash_table_init): Initialize needed, not saw_needed. (bfd_elf_get_needed_list): New function. * bfd-in.h (struct bfd_elf_link_needed_list): Define. (bfd_elf_get_needed_list): Define. * bfd-in2.h: Rebuild. * ecoff.c (_bfd_ecoff_find_nearest_line): Also initialize find_buffer and fdrtab_len fields of newly allocated find_line_info structure. Mon Jul 3 17:03:52 1995 Jeff Law (law@snake.cs.utah.edu) * som.c (hppa_som_gen_reloc_type): New argument "sym_diff", nonzero when we're generating relocations for an expression using the difference of two symbols. All callers changed. Handle difference of symbols for both R_HPPA and R_COMPLEX cases. (som_write_fixups): Handle R_COMP1, R_COMP2 and R_CODE_EXPR fixups. Mon Jul 3 13:55:18 1995 Steve Chamberlain * config.bfd (win32): New configuration. * configure.host (pe): Changed to i386win32. * config/i386pe.mh: Deleted. * config/i386win32.mh: New file. Mon Jul 3 11:30:45 1995 Ian Lance Taylor * ecoff.c (_bfd_ecoff_find_nearest_line): If we allocate find_line_info, clear the fdrtab field. * targets.c (enum bfd_flavour): Add bfd_target_msdos_flavour here, rather than in bfd-in2.h. * bfd.c (enum bfd_error): Define bfd_error_no_armap. (bfd_errmsgs): Add string for bfd_error_no_armap. * bfd-in2.h: Rebuild. * ecoff.c (ecoff_link_add_archive_symbols): If an archive has no armap, set bfd_error_no_armap rather than bfd_error_no_symbols. * elfcode.h (elf_link_add_archive_symbols): Likewise. * linker.c (_bfd_generic_link_add_archive_symbols): Likewise. * elfcode.h (elf_link_add_object_symbols): Permit common and indirect symbols in weakdefs BFD_ASSERT. * elf32-i386.c (elf_i386_adjust_dynamic_symbol): Simplify BFD_ASSERT to permit some legal, but odd, cases. * elf32-sparc.c (elf32_sparc_adjust_dynamic_symbol): Likewise. * elf32-m68k.c (elf_m68k_adjust_dynamic_symbol): Likewise. * Makefile.in: Rebuild dependencies. (BFD32_BACKENDS): Add versados.o. (CFILES): Add pe-i386.c, pei-i386.c, and versados.c. start-sanitize-arc (elf32-arc.o): New target. This target should be removed when elf32-arc.c can be added to CFILES, after which the automatic dependency building will handle it. end-sanitize-arc Sun Jul 2 17:49:32 1995 Ian Lance Taylor * cofflink.c (_bfd_coff_generic_relocate_section): Cast base_file to FILE * before using it. * stab-syms.c: Revert yesterday's patch. Sat Jul 1 12:10:42 1995 Fred Fish * stab-syms.c (stdio.h): Include prior to libaout.h, which includes bfdlink.h, which now uses FILE. Sat Jul 1 00:11:08 1995 Ken Raeburn * elfxx-target.h: New file. * libelf.h (struct elf_backend_data): Remove elf_64_p field. * elfxx-target.h (elfNN_bed): Don't set it. * elf32-target.h, elf64-target.h: Deleted. * Makefile.in (elf32-target.h, elf64-target.h): Build them from elfxx-target.h. Fri Jun 30 16:07:18 1995 Steve Chamberlain * cofflink.c (_bfd_coff_generic_relocate_section): Compare the full text of .reloc or .edata section names. Fri Jun 30 15:47:37 1995 Fred Fish * cofflink.c (_bfd_coff_generic_relocate_section): Remove extra '+'. Thu Jun 29 17:24:52 1995 Steve Chamberlain * coff-h8300.c (COFF_LONG_FILENAMES): Define. Wed Jun 28 18:04:42 1995 Steve Chamberlain * Makefile.in: versados.o is now conditionally built. * coffcode.h (add_data_entry): New function. (coff_write_object_contents): Clean up. Calculate data entries. * cofflink.c (_bfd_coff_generic_relocate_section): .reloc and .edata sections are IMAGE_BASED too. If there's a base_file then write out base information. * configure.host (i386-*-pe): New. * syms.c (coff_section_type): Only scan prefixes. * targets.c (bfd_target_vector): Versados is now conditionally built. * config/m68k-coff.mt: Build versados.o * hosts/i386pe.h: New file. Mon Jun 26 13:53:49 1995 Jeff Law (law@snake.cs.utah.edu) * elf32-hpa.c (elf32_hppa_relocate_section): Close comment before R_PARISC_DPREL21L handling. Thu Jun 22 19:28:36 1995 Ken Raeburn Sun May 7 11:53:41 MDT 1995 Bryan Ford * config/i386-moss.mt: created. Thu Jun 22 08:56:10 1995 Steve Chamberlain * reloc.c (bfd_perform_relocation): Add case for -ve words. Wed Jun 21 13:13:49 1995 Jeff Law (law@snake.cs.utah.edu) * elf32-hppa.c (elf32_hppa_relocate_section): Don't try to apply a relocation against an undefined symbols. Wed Jun 21 10:16:10 1995 Steve Chamberlain * versados.c: Second pass/rewrite. Mon Jun 19 08:40:45 1995 Steve Chamberlain * syms.c (coff_section_type): Compare only the front part of a section name. Sat Jun 17 09:40:44 1995 Jeff Law (law@snake.cs.utah.edu) * elf32-hppa.c (elf32_hppa_size_stubs): Set the size of the stub section if we get an error. * elf32-hppa.c (elf32_hppa_bfd_final_link_relocate): Don't mess with the operands of an R_PARISC_DPREL21L relocation if the insn is not "addil ,%r27". Fri Jun 16 15:04:47 1995 Stan Shebs * bfd-in.h (NT_subsystem, NT_stack_heap): Declare but don't define. * bfd-in2.h: Rebuilt. * bfd.c (NT_subsystem, NT_stack_heap): Define. Fri Jun 16 00:07:25 1995 Jeff Law (law@snake.cs.utah.edu) * elf32-hppa.c (elf32_hppa_bfd_link_link_relocate): Use the right type field (there are two!) when checking to see if $global$ is defined. Thu Jun 15 14:03:47 1995 Stan Shebs * bfd-in.h, bfd-in2.h (bfd_boolean): Rename bfd_true, bfd_false to bfd_tttrue, bfd_fffalse so as not to conflict with functions. * coffswap.h (coff_swap_scnhdr_out): Remove version that was hacked for MPW C. * mpw-config.in: Set shell vars instead of pasting to makefile for each configuration, edit coffswap.h to make MPW C not choke. (i386-unknown-coff, sh-hitachi-hms): Recognize. * mpw-make.in (BFD_LIBS): Add versados.c.o. * versados.c (versados_scan): Properly cast results from bfd_alloc. Wed Jun 14 15:27:32 1995 Steve Chamberlain * cofflink.c (process_embedded_commands): New function reads and handles .drectve sections for PE. (coff_link_input_bfd): Call new function if PE. Mon Jun 12 12:09:39 1995 Jeff Law (law@snake.cs.utah.edu) * bfd-in.h (bfd_set_section_vma): Case true to a boolean. (bfd_set_cacheable): Likewise. * bfd-in2.h: Rebuilt. Fri Jun 9 12:20:28 1995 Steve Chamberlain * elfcode.h (elf_sort_hdrs): Rewrite to be symmetrical. Fri Jun 9 12:49:00 1995 Jeff Law (law@snake.cs.utah.edu) * targets.c: Add copy_private_symbol_data and link_split_section to the target vector. * libbfd-in.h (_bfd_generic_bfd_copy_private_symbol_data): Define. (_bfd_nolink_bfd_link_split_section): Likewise. (bfd_generic_link_split_section): Declare. * syms.c (bfd_copy_private_symbol_data): Define. * linker.c (bf_link_split_section): Likewise. * som.c (som_bfd_copy_private_symbol_data): New function (som_bfd_link_split_section): Likewise. * All other targets updated with default versions of new routines. * Take out my braindamaged bfd_true/bfd_false changes from earlier today. Replace with just: * bfd-in.h: (TRUE_FALSE_ALREADY_DEFINED): Define this if compiling with g++-2.6 or later. * bfd-in2.h: Rebuilt. Fri Jun 9 07:54:29 1995 Steve Chamberlain * versados.c (struct esd, get_4): Lint; use unsigned chars. * coff-i960.c (coff_i960_relocate): Compare output section names when converting for vxworks. Wed Jun 7 19:01:30 1995 Ken Raeburn * elfcode.h (elf_fake_sections): Permit .scommon or COMMON sections as random SHT_NOBITS sections, in case a linker script is strange. Tue Jun 6 17:29:32 1995 Steve Chamberlain * bfd-in.h (NT_subsystem, NT_stack_heap): Moved from pe.h * coff-i386.c (coff_i386_rtype_to_howto): Get PE relocs right. * coffcode.h (coff_mkobject): Set pe tdata bit when using PE. * cofflink.c (COFF_WITH_PE code): Test on obj_pe bit rather than conditional compile. * configure.in: Fix PE dependencies. * libcoff-in.h (obj_pe): New. (coff_tdata): Added pe entry. * libcoff.h: Regenerated. Mon Jun 5 09:07:13 1995 Steve Chamberlain * coff-a29k.c (coff_a29k_adjust_symndx): Completely parenthesize macro. Mon Jun 5 02:15:20 1995 Ken Raeburn Linker support for m68k-elf from Andreas Schwab : * elfcode.h (elf_link_add_object_symbols): Check for NULL when looping through the symbol hashes. (elf_bfd_final_link): When looking for _init and _fini don't use the symbol if it is imported from another object. * elf32-m68k.c: Relocation type changed from REL to RELA. Regular and dynamic linking support functions added, similar to other elf targets. * config.bfd (i[345]86-*-gnu*): Use ELF configuration. Fri Jun 2 18:54:59 1995 Steve Chamberlain * versados.c: New file. * bfd-in2.h (struct _bfd): New field. * bfd.c (struct _bfd): New field. * configure.in (versados_vec): New field. * targets.c (bfd_flavor): Added versados. Thu Jun 1 13:51:49 1995 Steve Chamberlain * coffcode.h (sec_to_styp_flags, styp_to_sec_flags, coff_new_section_hook): Any section that starts ".stab" is now marked as debugging. Thu Jun 1 16:15:16 1995 Ken Raeburn * archive.c (_bfd_write_archive_contents): Disable extended name table until it can be made optional, so that native AR has half a chance on SunOS and HP/UX. * linker.c (_bfd_generic_link_output_symbols, case bfd_link_hash_indirect): Add cast to correct pointer types. Sat May 27 21:37:31 1995 J.T. Conklin * config.bfd (m68k-bull-sysv*): Added strip_underscore=yes. (m68k-est-coff): Removed. target does not effect object format. Wed May 24 10:52:01 1995 Steve Chamberlain * linker.c (_bfd_generic_link_output_symbols): Cope with indirect symbols. * elf32-i386.c (elf_i386_relocate_section): Give error message when linking to a shared reloc which isn't there. Wed May 24 10:40:00 1995 Steve Chamberlain Support for ARM-PE. * Makefile.in, coffcode.h, config.bfd, configure.in, pe-arm.c, pei-arm.c, coff-arm.c, reloc.c, targets.c, config/arm-pe.mt: Support for ARM COFF/PE. Tue May 23 19:24:58 1995 Ken Raeburn * bfd.c (bfd_get_relocated_section_contents): Now a function, tries calling routine from input bfd target vector for bfd_indirect_link_order. Put a declaration into the header file. * bfd-in2.h: Regenerated. * elf32-mips.c (gprel16_with_gp): New function, split out from mips_elf_gprel16_reloc. (mips_elf_gprel16_reloc): Call it. If output bfd target vector isn't elf flavoured, abort, since it's assumed to be elf in some of this code, including the code that looks up the gp value. (elf32_mips_get_relocated_section_contents): New function, modified from bfd_generic_get_relocated_section_contents to deal with passing gp to gprel16_with_gp. (bfd_elf32_bfd_get_relocated_section_contents): New macro. * elf32-target.h (bfd_elf32_bfd_get_relocated_section_contents): Don't define if already defined. Tue May 23 15:58:15 1995 Jeff Law (law@snake.cs.utah.edu) * Makefile.in: Install bfdlink.h too. Sun May 21 22:25:09 1995 Jeff Law (law@snake.cs.utah.edu) * elf32-hppa.c (elf32_hppa_relocate_section): Handle undefined and notsupported return codes from final_link_relocate (used when $global$ is undefined or nonexistant). (elf32_hppa_bfd_link_link_relocate): If $global$ exists, but is not defined,then return bfd_reloc_undefined. Fri May 19 10:00:14 1995 Steve Chamberlain * coffswap.h: (IMAGE_BASE): Define to 0 if not. Thu May 18 04:24:01 1995 Ken Raeburn Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk) * aoutx.h (aout_link_input_section_standard): If defined, call MY_relocatable_reloc before doing a partial relocation. * aout-arm.c: (WRITE_HEADERS): Delete. (NAME): Define version to override default in aoutx.h (MY(howto_table)): Reformat. Alter some entries slightly. (RELOC_ARM_BITS_NEG_{BIG,LITTLE}): Define. (MY(reloc_howto), MY(put_reloc), MY(relocatable_reloc)): New functions. (MY_reloc_howto, MY_put_reloc, MY_relocatable_reloc): Define. (MY(fix_pcrel_26)): Renamed from aoutarm_fix_pcrel_26, return bfd_reloc_ok not bfd_reloc_continue. (MY(fix_pcrel_26_done)): Likewise. (MY(bfd_reloc_type_lookup)): Renamed from aoutarm_reloc_type_lookup. (MY_bfd_link_hash_table_create, MY_bfd_link_add_symbols, MY_bfd_final_link): Delete. (MY_swap_std_reloc_in, MY_swap_std_reloc_out, MY_get_section_contents): Define. (aoutx.h): Include it. (MY(swap_std_reloc_{in,out})): New functions. Use RELOC_ARM_BITS_NEG_{BIG,LITTLE} to extract negative reloc bit. (aoutarm_squirt_out_relocs): Delete. From: David Taylor (dtaylor@armltd.co.uk) * config/arm[lb]-aout.mt: New files. * aout-arm.c: New file. * config.bfd: Handle arm{,e[lb]}-*-aout * configure.in: Add vetor for aout_arm_{big,little}_vec. * reloc.c: New relocation types for the ARM. * targets.c (aout_arm_{big,little}_vec): declare. Tue May 16 10:29:51 1995 Jim Kingdon * libbfd.c (bfd_stat): If bfd_cache_lookup returns an error, return an error to the caller. Call bfd_set_error on errors. Tue May 16 14:44:45 1995 Ken Raeburn * libcoff-in.h (coff_renumber_symbols): Modified prototypes in accordance with 11 May libcoff.h change. Thu May 11 16:43:14 1995 Steve Chamberlain tekhex.c (first_phase): Understand type 0 symbols. (tekhex_write_object_contents): Fix typo in final record. Thu May 11 16:43:14 1995 Steve Chamberlain * coff-i960.c (optcall_callback): don't try and optimize undefined refs. (coff_write_relocs): Search for broken relocs on the way out and fix them up. (coff_renumber_symbols): Calculate and return index of first undefined symbol. (coff_write_object_contents): Call coff_renumber_symbols and coff_write_relocs with the new args. * libcoff.h: (coff_renumber_symbols, coff_renumber_symbols): Modified prototypes. Thu May 11 16:43:14 1995 Steve Chamberlain Tom Griest Initial support for PE format. * Makefile.in, targets.c, configure.in, config.bfd: Add support for i386-*-winnt and i386-*-pe. * archive.c (do_slurp_coff_armap): Understand NTPE format archives. (_bfd_slurp_extended_name_table): Turn \ in a filename into /. * bfd-in.h (bfd_link_subsystem, _bfd_link_stack_heap): New. * coff-i386.c (howto_table): Conditionalize PCRELOFFSET. * coffcode.h (IMAGE_BASE): New. (coff_compute_section_file_positions): Throw away .junk sections for PE, align symbols. (coff_write_object_contents): Throw away .junk sections for PE. Remember info on .idata and .rsrc sections. Fill in the PE header. (coff_slurp_symbol_table): PE uses C_SECTION class. * cofflink.c (_bfd_coff_final_link): Keep PE info up to date. (_bfd_coff_generic_relocate_section): Cope with PE relocs. * coffswap.h (coff_swap_{aout/file/scn/sym}hdr_{in/out}): New code for PE headers. Tue May 9 17:01:38 1995 Michael Meissner * config.bfd: Add little endian PowerPC support. * configure.in: Ditto. * targets.c: Ditto. * config/ppcle-elf.mt: New file, for little endian PowerPC support. * config/ppc-elf.mt: Add little endian powerpc to the BFD selection vectors. * elf32-ppc.c (ppc_elf_merge_private_bfd_data): Complain if linking a different endian object than we expect. (TARGET_LITTLE_SYM, TARGET_LITTLE_NAME): Define, to provide little endian support. Tue May 2 16:32:24 1995 Jeff Law (law@snake.cs.utah.edu) * config.bfd (hppa*-*-lites*): Treat just like hppa*-*-*elf*. Tue Apr 25 19:38:43 1995 Ken Raeburn * coffgen.c (make_a_section_from_file): Initialize lma same as vma. Tue Apr 25 11:03:21 1995 Jason Molenda (crash@phydeaux.cygnus.com) * hosts/std-host.h: #include ansidecl.h 'cause PTR is used in std-host.h. Mon Apr 24 23:56:44 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com) * hosts/i386linux.h (HAVE_PROCFS): Don't define it. Added lengthy comment explaining why. Mon Apr 24 10:34:02 1995 Michael Meissner * hosts/i386linux.h (HAVE_PROCFS): If NO_PROCFS is defined, don't define HAVE_PROCFS. Mon Apr 24 08:33:12 1995 Michael Meissner * elf32-ppc.c (ppc_elf_relocate_section): Do not continue processing unknown symbols to prevent a cascade of errors. Fri Apr 21 12:48:48 1995 Ken Raeburn Patches from H.J. Lu for Linux ELF core file support. * elfcode.h (elf_core_file_matches_executable_p) [HAVE_PROCFS]: Use prpsinfo_t instead of struct prpsinfo, for consistency. * hosts/i386linux.h (HAVE_PROCFS): Define. Thu Apr 20 09:07:39 1995 Steve Chamberlain * linker.c (link_action): Do the right thing when a undefined strong symbol appears after an undefined weak symbol. Fri Apr 14 16:51:17 1995 Michael Meissner * elf32-ppc.c (ppc_elf_relocate_section): New function to relocate a whole section for the linker, bypassing bfd_perform_relocation. (ppc_elf_reloc_type_lookup): New function to map the BFD enumeration code into a howto structure. (ppc_elf_howto_raw): Rename from ppc_elf_howto_table. (ppc_elf_howto_table): New array that maps PowerPC relocation numbers to howto structures without a linear search. Change from using bfd_elf_generic_reloc to use ppc_elf_std_reloc. (ppc_elf_howto_init): Initialize ppc_elf_howto_table from ppc_elf_howto_raw. (ppc_elf_reloc_type_lookup): Use a case statement instead of a loop. (ppc_elf_std_reloc): Replacement for bfd_elf_generic_reloc. (ppc_elf_unsupported_reloc): Print a real error message, instead of calling abort. (ppc_elf_addr16_ha_inner): Abstract getting adjustment from ppc_elf_addr16_ha_reloc, so ppc_elf_relocate_section can use it too. (ppc_elf_addr16_ha_reloc): Call it. (ppc_elf_got16_inner): Abstract getting adjustment from ppc_elf_got16_reloc, so ppc_elf_relocate_section can use it too. (ppc_elf_got16_reloc): Call it. (ppc_elf_info_to_howto): Rename from powerpc_info_to_howto. * elfcode.h (elf_symbol_from_bfd_symbol): Omit space in debugging output. (elf_symbol_flags): Add debug function to decode flags so that defining DEBUG to be 4 will compile again. (elf_debug_section): Fix typo in debug output. Fri Apr 14 16:03:04 1995 Ken Raeburn * config.bfd: Add m68*-*-elf*. * elf32-m68k.c: Filled out implementation, except for dynamic linking support. * reloc.c (enum bfd_reloc_code_real): Added *_GOT_PCREL, *_GOTOFF, *_PLT_PCREL, *_PLTOFF, *_68K_* relocations for ELF. * libbfd.h, bfd-in2.h: Regenerated. Thu Apr 13 14:28:04 1995 Torbjorn Granlund * coff-m68k.c (COFF_DEFAULT_SECTION_ALIGNMENT_POWER): Change from 1 to 2. (bfd_target): Change minimum section alignment from 1 to 2. Wed Apr 12 12:40:04 1995 Ken Raeburn * aoutx.h (machine_type, case bfd_arch_mips): Treat R8000 like R6000 and R4000 for now. Tue Apr 4 12:28:25 1995 Stan Shebs * mpw-config.in: New file, MPW version of configure.in. * mpw-make.in: New file, MPW version of Makefile.in. * hosts/mpw.h: New file, MPW host definitions. * ecoffswap.h (ecoff_swap_pdr_in, ecoff_swap_pdr_in) [MPW_C]: Alternate versions without ECOFF_64 that chokes MPW C. * coffswap.h (coff_swap_scnhdr_out): Add alternative version with partly-expanded macros. Thu Mar 30 14:56:21 1995 Ian Lance Taylor * reloc.c (bfd_perform_relocation): Don't bother to check for overflow if the symbol is undefined. Thu Mar 30 14:32:26 1995 H.J. Lu (hjl@nynexst.com) * config.bfd: Change linux to default to elf. Using i[345]86-*-linuxaout will build a library which defaults to a.out. * config/i386-laout.mt: Rename from old config/i386-linux.mt. * config/i386-linux.mt: Rename from old config/i386-lelf.mt. Comment out EXTRALIBS. * config/i386-lelf.mt: Remove. Wed Mar 29 12:01:30 1995 Ian Lance Taylor * coff-i960.c (coff_i960_relocate): Cache the section symbol in the used_by_bfd field of the section, to avoid looping for each reloc. * cpu-h8500.c (arch_info_struct): Change name from "H8/300" to "h8300" for consistency with other cpu-* files. Tue Mar 28 15:14:11 1995 Ian Lance Taylor * bout.c (b_out_canonicalize_reloc): Handle SEC_CONSTRUCTOR sections. (b_out_get_reloc_upper_bound): Likewise. * linker.c (generic_link_add_symbol_list): Skip constructor symbols which the main linker code did not do anything with. (_bfd_generic_link_output_symbols): Use udata.p if it is set, rather than looking the symbol up in the hash table. Just pass through constructor symbols for which udata.p is not set. If the linker defined the symbol, clear the constructor flag. Tue Mar 21 10:50:32 1995 Jeff Law (law@snake.cs.utah.edu) * som.c (som_set_reloc_info): Sign extend constants from R_DATA_OVERRIDE fixups. * libhppa.h (sign_extend): Renamed from sign_ext. Fix. (low_sign_extend): Likewise. Mon Mar 20 22:39:10 1995 Jeff Law (law@snake.cs.utah.edu) * som.c (som_slurp_symbol_table): Tighten test to determine what symbols are section symbols. Sat Mar 18 01:54:45 1995 Ian Lance Taylor * elfcode.h (elf_bfd_link_add_symbols): An empty archive is OK. Fri Mar 17 16:29:02 1995 Jeff Law (law@snake.cs.utah.edu) * som.c (som_bfd_copy_private_section_data): Just return true when either the input or output section isn't attached to a SOM BFD. (som_bfd_copy_private_bfd_data): Similarly for BFD private data. Fri Mar 17 11:50:34 1995 Ian Lance Taylor * elfcode.h (elf_link_add_object_symbols): Check whether a dynamic object has already been included, and ignore it the second time. Wed Mar 15 11:56:40 1995 Ian Lance Taylor * elf32-sparc.c (elf_sparc_howto_table): Change R_SPARC_GOT13 from complain_overflow_bitfield to complain_overflow_signed. * libelf.h (bfd_elf32__write_relocs): Don't declare. (bfd_elf64__write_relocs): Don't declare. Tue Mar 14 05:54:33 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com) * stab-syms.c (aout_stab_name): Moved aout_stab_names to be local to this function. Recoded function to stop using table, to improve performance (on i486-netbsd host). Left old version intact under "#if 0" for further performance testing. Mon Mar 13 13:48:49 1995 Ian Lance Taylor * elfcode.h (write_relocs): Make static. Use PTR argument as a pointer to a boolean variable set to true if something fails. Cast to PTR rather than void *. (sym_is_global): Rewrite for clarity. (map_program_segments): If the program header size is too small, call _bfd_error_handler and return failure rather than aborting. (NAME(bfd_elf,write_object_contents)): Pass boolean variable when calling write_relocs. (elf_symbol_from_bfd_symbol): Use BFD_ASSERT rather than abort. (struct elf_info_failed): Define. (NAME(bfd_elf,size_dynamic_sections)): Declare variables in inner blocks. Pass elf_info_failed structure when calling elf_export_symbol and elf_adjust_dynamic_symbol. (elf_export_symbol): Treat data argument as elf_info_failed rather than bfd_link_info. Set failed field on error. (elf_adjust_dynamic_symbol): Likewise. (struct elf_finfo_failed): Define. (elf_bfd_final_link): Pass elf_finfo_failed structure when calling elf_link_output_extsym. Use BFD_ASSERT rather than abort. (elf_link_output_extsym): Treat data argument as elf_finfo_failed rather than elf_final_link_info. Set failed field on error. (elf_link_input_bfd): Use BFD_ASSERT rather than abort. (elf_reloc_link_order): Likewise. * elf32-sparc.c (elf32_sparc_size_dynamic_sections): Only write out PLTRELSZ, PLTREL and JMPREL relocs if there is a .rela.plt section. Solaris 2.4 apparently does not handle empty reloc information correctly. * archive.c (bsd_write_armap): Cast getuid and getgid results to long, and print with %ld. start-sanitize-arc Sun Mar 12 05:22:10 1995 Doug Evans * elf32-arc.c (elf_arc_howto_table): Relocs with implicit addends don't work too well with zero src_masks. Correct values. end-sanitize-arc Fri Mar 10 16:41:05 1995 Ian Lance Taylor * aoutx.h (translate_to_native_sym_flags): Always use the output section if it is not NULL. Thu Mar 9 15:06:25 1995 Ian Lance Taylor * coffswap.h (coff_swap_scnhdr_out): If the line number count or the reloc count does not fit, print an error and return 0. * coffcode.h (coff_write_object_contents): Check return value of coff_swap_scnhdr_out. * ecoff.c (_bfd_ecoff_write_object_contents): Check return value of bfd_coff_swap_scnhdr_out. * bfd.c: Include or , depending upon ANSI_PROTOTYPES. (bfd_error_handler_type): New global type. (_bfd_error_program_name): New static variable. (_bfd_default_error_handler): New static function. (_bfd_error_handler): New BFD private global variable. (bfd_set_error_handler): New globally visible function. (bfd_set_error_program_name): New globally visible function. * libbfd-in.h (_bfd_error_handler): Declare. * bfd-in2.h, libbfd.h: Rebuild. * aoutx.h (NAME(aout,swap_ext_reloc_in)): Add symcount parameter, and use it instead of bfd_get_symcount. Check r_index after setting r_extern based on whether this is a base relative reloc. (NAME(aout,swap_std_reloc_IN)): Add symcount parameter, and use it instead of bfd_get_symcount. (NAME(aout,slurp_reloc_table)): Pass bfd_get_symcount to reloc swap routines. * libaout.h (NAME(aout,swap_ext_reloc_in)): Add symcount parameter to declaration. (NAME(aout,swap_std_reloc_in)): Likewise. * sunos.c (sunos_canonicalize_dynamic_reloc): Pass info->dynsym_count to reloc swap routines. * aout-ns32k.c (MY_swap_std_reloc_in): Add symcount parameter. * hp300hpux.c (MY(swap_std_reloc_in)): Likewise. (MY(slurp_reloc_table)): Pass bfd_get_symcount to reloc swap routine. * i386lynx.c (NAME(lynx,swap_ext_reloc_in)): Add symcount parameter. (NAME(lynx,swap_std_reloc_in)): Likewise. (NAME(lynx,slurp_reloc_table)): Pass bfd_get_symcount to reloc swap routines. Thu Mar 9 12:04:05 1995 Michael Meissner * bfd.c (bfd_merge_private_bfd_data): New function vector to be called by the linker to merge any private bfd data of the input files and the output file. Used by the PowerPC ELF support to check whether -mrelocatable is used for all modules. (bfd_set_private_flags): New function vector to be called by the assembler to set private flags. Used by the PowerPC ELF support to set that a particular object file was assembled with the -mrelocatable option. * targets.c (BFD_JUMP_TABLE_COPY): Add intiialization of the bfd_merge_private_bfd_data and bfd_set_private_flags function vectors. * bfd-in2.h, libbfd-in.h: Rebuild with bfd.c and targets.c changes. * elf32-ppc.c (ppc_elf_set_private_flags): New function to set the ELF e_flags field. (ppc_elf_copy_private_bfd_data): Copy the e_flags field from the input file to the output file. (ppc_elf_merge_private_bfd_data): Check for a mismatch between the e_flags field of all of the linker input files. * libelf.h (elf_obj_tdata): Add ppc_flags_init field so that the PowerPC support can check if compataible e_flags are present. * aout-target.h: Add NOP for the bfd_merge_private_bfd_data and bfd_set_private_flags function vectors. * coffcode.h: Ditto. * elf32-target.h: Ditto. * elf64-target.h: Ditto. * libbfd.h: Ditto. * libecoff.h: Ditto. * som.c: Ditto. Wed Mar 8 00:53:54 1995 Ian Lance Taylor * cpu-mips.c (arch_info_struct): Add mips:8000 entry. * elfcode.h (swap_out_syms): Mark an undefined BSF_WEAK symbol as STB_WEAK rather than STB_GLOBAL. start-sanitize-arc Tue Mar 7 20:34:43 1995 Doug Evans * configure.in (SELECT_VECS): Split bfd_elf32_arc_vec into big/little. * targets.c (bfd_target_vector): Likewise. * elf32-arc.c (TARGET_BIG_SYM): Define. (TARGET_BIG_NAME): Define. * config/arc-elf.mt (DEFAULT_VECTOR): Set to bfd_elf32_littlearc_vec. (SELECT_VECS): Add bfd_elf32_bigarc_vec. end-sanitize-arc Tue Mar 7 12:23:47 1995 Ian Lance Taylor * coffcode.h (bfd_coff_backend_data): Add new field _bfd_coff_adjust_symndx. (bfd_coff_adjust_symndx): Define. (coff_adjust_symndx): Define as NULL if not already defined. (bfd_coff_std_swap_table): Initialize new field to coff_adjust_symndx. * cofflink.c (coff_link_input_bfd): Call coff_adjust_symndx if it is defined. * coff-a29k.c (coff_a29k_adjust_symndx): New static function. (coff_adjust_symndx): Define before including coffcode.h. * libcoff.h: Rebuild. * format.c (bfd_check_format_matches): Skip binary_vec when searching through bfd_target_vector. * elfcode.h (elf_sort_hdrs): Check SHT_NOBITS before checking sh_size. Mon Mar 6 23:31:36 1995 Doug Evans * elfcode.h (elf_sort_hdrs): Keep SHT_NOBITS sections after !SHT_NOBITS ones. Mon Mar 6 09:53:08 1995 Jeff Law (law@snake.cs.utah.edu) * cpu-hppa.c (arch_info_struct): Support both PA1.0 and PA1.1 machine types. (bfd_hppa_arch): Link in both PA1.0 and PA1.1 architecture info structures. * libhppa.h (enum pa_arch): New enumeration to describe the different variants of the PA architecture. * som.c (som_object_setup): Use new enumeration to set machine type. (som_finish_writing): If the machine type is PA1.1, then use the PA1.1 machine identifier in the output file. Thu Mar 2 15:58:24 1995 Ian Lance Taylor * aoutx.h (NAME(aout,swap_ext_reloc_in)): Treat the index of a base relative reloc as an index into the symbol table, regardless of the setting of r_extern. (NAME(aout,swap_std_reloc_in)): Likewise. * aoutx.h (NAME(aout,set_section_contents)): Double check that the caller is writing to a valid section. Thu Mar 2 14:37:57 1995 Bryan Ford * binary.c: Add support for reading binary files. Loads the raw contents of the file into a data section and wraps some symbols around it. The symbols `_binary__start' and `_binary__end' indicate the start and end of the data, while `_binary__size' is an absolute symbol whose value is the size of the data. is the name of the binary input file, with all non-alphanumeric characters converted to underscores. * archures.c (bfd_arch_get_compatible): Assume users knows what they're doing if one of the architectures is bfd_arch_unknown. Wed Mar 1 17:30:46 1995 Michael Meissner * elf32-ppc.c (elf_powerpc_howto_table): For relocation R_PPC_GOT16, change complain_on_overflow to be complain_overflow_signed. Wed Mar 1 11:52:55 1995 Jason Molenda * configure.host: Recognize powerpc-*-aix*. Wed Mar 1 11:57:39 1995 Ian Lance Taylor * coff-i960.c (COFF_PAGE_SIZE): Define. * configure.in: Rewrite output of TDEFAULTS to avoid relying on semantics of single quotes in parameter substitution. Tue Feb 28 12:53:09 1995 Ian Lance Taylor * elfcode.h (elf_sort_hdrs): Sort empty sections before non-empty sections, if they have the same VMA. * config.bfd (i[345]86-*-linuxelf*): New target. Use i386-lelf. (i[345]86-*-gnuelf*): New target. Use i386-gelf. * config/i386-lelf.mt: New file. * config/i386-gelf.mt: New file. Mon Feb 27 12:58:25 1995 Kung Hsu * config.bfd: add a29k-*-vxworks configuration. Wed Feb 22 14:40:26 1995 Ian Lance Taylor * libaout.h (NAME(aout,slurp_reloc_table)): Change declaration to use reloc_howto_type rather than const struct reloc_howto_struct. Tue Feb 21 18:19:22 1995 Ian Lance Taylor * bout.c (b_out_slurp_reloc_table): Don't return an error if asked for relocations for the .bss section. Tue Feb 21 15:13:05 1995 Jeff Law (law@snake.cs.utah.edu) * som.c (som_bfd_ar_write_symbol_stuff): Handle objects with odd lengths. Fri Feb 17 12:34:36 1995 Michael Meissner * elf32-ppc.c (ppc_elf_got16_reloc): Make GOT style relocs add 32768, so the GOT pointer can point to 16384 pointers, instead of 8192. Fri Feb 17 11:45:38 1995 Ian Lance Taylor * hosts/sysv4.h: Include , , and . Only define SEEK_SET and SEEK_CUR if they are not already defined. Remove all external function declarations. * syms.c (bfd_decode_symclass): Return 'W' for a weak symbol. * coffgen.c (coff_real_object_p): Set start address and flags before calling coff_mkobject_hook. Restore them on failure. * ecoff.c (_bfd_ecoff_mkobject_hook): If not ECOFF_AOUT_ZMAGIC, clear D_PAGED. * coffgen.c: Reindented. Thu Feb 16 14:37:23 1995 Doug Evans * reloc.c (bfd_perform_relocation): Don't use bitpos in overflow calculations. (bfd_install_relocation): Likewise. Thu Feb 16 13:22:29 1995 Ian Lance Taylor * hosts/std-host.h: Remove all function declarations which return int or void, except the one for free. Wed Feb 15 14:54:18 1995 Michael Meissner * elf32-ppc.c (elf_powerpc_howto_table): Use a destination mask of 0xffffffff for R_PPC_REL32, not 0. (powerpc_reloc_map): Add low 16 bit, high 16 bit, and high 16 bit adjusted relocations. Tue Feb 14 17:47:17 1995 Ian Lance Taylor * elf32-mips.c (struct mips_elf_find_line): Define. (mips_elf_find_nearest_line): New static function. (bfd_elf32_find_nearest_line): Define. * libelf.h (struct elf_obj_tdata): Add find_line_info field. * ecoff.c (_bfd_ecoff_swap_tir_in): Move to ecofflink.c. (_bfd_ecoff_swap_tir_out): Likewise. (_bfd_ecoff_swap_rndx_in): Likewise. (_bfd_ecoff_swap_rndx_out): Likewise. (cmp_fdrtab_entry): Likewise. (mk_fdrtab): Likewise. (lookup): Likewise. (_bfd_ecoff_find_nearest_line): Just call _bfd_ecoff_locate_line to do most of the work. Allocate find_line_info if necessary. * ecofflink.c: Include "aout/stab_gnu.h". (_bfd_ecoff_swap_tir_in): Move in from ecoff.c. (_bfd_ecoff_swap_tir_out): Likewise. (_bfd_ecoff_swap_rndx_in): Likewise. (_bfd_ecoff_swap_rndx_out): Likewise. (cmp_fdrtab_entry): Likewise. Use PTR instead of void *. (mk_fdrtab): Move in from ecoff.c. Add debug_info, debug_swap, and line_info arguments, and use them instead of ecoff_data. (fdrtab_lookup): Move in from lookup in ecoff.c. Remove abfd argument, add line_info argument. Use it instead of ecoff_data. (_bfd_ecoff_locate_line): New function, mostly from the old _bfd_ecoff_find_nearest_line in ecoff.c. * libecoff.h (ecoff_data_type): Remove find_buffer, fdrtab_len and fdrtab fields, replacing them find_line_info field. (_bfd_ecoff_swap_tir_in): Declare. (_bfd_ecoff_swap_tir_out): Declare. (_bfd_ecoff_swap_rndx_in): Declare. (_bfd_ecoff_swap_rndx_out): Declare. * libbfd-in.h (_bfd_ecoff_locate_line): Declare. * libbfd.h: Rebuild. * configure.in: Don't use ecoff.o for bfd_elf32_bigmips_vec or bfd_elf32_littlemips_vec. * Makefile.in: Rebuild dependencies. Tue Feb 14 14:04:22 1995 Michael Meissner * libelf.h (elf_backend_data): Add fields elf_machine_alt1 and elf_machine_alt2 which provide alternate versions of the machine code. * elf32-ppc.c (ELF_MACHINE_ALT1, ELF_MACHINE_ALT2): Define to recognize old versions of the PowerPC machine code. * elf32-target.h (elf32_bed): Initialize alternate machine code fields defined by ELF_MACHINE_ALT1 and ELF_MACHINE_ALT2. * elf64-target.h (elf64_bed): Initialize alternate machine code fields defined by ELF_MACHINE_ALT1 and ELF_MACHINE_ALT2. * elfcode.h (elf_object_p, elf_core_file_p): In addition to the main machine code field, check the two alternate machine code fields. Tue Feb 14 12:46:48 1995 Ian Lance Taylor * aoutf1.h (MACHTYPE_OK): Don't define if already defined. Don't accept M_SPARC if bfd_arch_sparc is not in the list of supported architectures, and don't accept a 680x0 machine type if bfd_arch_m68k is not in the list of supported architectures. * aout0.c (MACHTYPE_OK): Define. Mon Feb 13 23:25:38 1995 Ian Lance Taylor * aoutx.h (NAME(aout,swap_ext_reloc_in)): Don't return a pointer to garbage if the symbol index is out of range. (NAME(aout,swap_std_reloc_in)): Likewise. start-sanitize-arc Mon Feb 13 09:35:30 1995 Doug Evans * elf32-arc.c (reloc_type): New type R_ARC_B26. (elf_arc_howto_table): Likewise. * reloc.c (BFD_RELOC_ARC_B26): Likewise. Thu Feb 9 17:31:40 1995 Doug Evans * archures (bfd_mach_arc_base): #define. (bfd_mach_arc_host, bfd_mach_arc_graphics, bfd_mach_arc_audio): Ditto. * cpu-arc.c (arch_info_struct): Define entries for each cpu variant. (bfd_arc_arch): Link each one in. (arc_get_mach): New function. * elf32-arc.c (arc_info_to_howto_rel): Renamed from arc_info_to_howto. (elf_info_to_howto_rel): Update. (arc_elf_object_p, arc_elf_final_write_processing): New functions. (elf_backend_object_p): Define. (elf_backend_final_write_processing): Define. (USE_REL): Define. end-sanitize-arc Thu Feb 9 18:36:52 1995 Ken Raeburn * Makefile.in (BFD32_BACKENDS): Add i386msdos.o. Thu Feb 9 12:02:35 1995 Ian Lance Taylor * i386linux.c (NEEDS_SHRLIB): Define. (linux_tally_symbols): Crash if a NEEDS_SHRLIB symbol is undefined. From hjl@nynexst.com (H.J. Lu). Wed Feb 8 17:26:00 1995 Ian Lance Taylor * linker.c (generic_link_check_archive_element): Allocate common symbol information structure. Don't bother to check for common symbol size overflow. (_bfd_generic_link_add_one_symbol): Likewise. * aoutx.h (aout_link_check_ar_symbols): Likewise. * linker.c (generic_link_check_archive_element): Adjust references to common symbol information for new structure. (_bfd_generic_link_add_one_symbol): Likewise. * aoutx.h (aout_link_check_ar_symbols): Likewise. (aout_link_add_symbols): Likewise. * ecoff.c (ecoff_link_add_externals): Likewise. * elfcode.h (elf_link_add_object_symbols): Likewise. (elf_link_output_extsym): Likewise. * sunos.c (sunos_add_one_symbol): Likewise. Wed Feb 8 09:53:42 1995 Doug Evans * elfcode.h (elf_sort_hdrs): Put SHT_NOBITS sections after !SHT_NOBITS. Tue Feb 7 16:27:33 1995 Jeff Law (law@snake.cs.utah.edu) * som.c (som_bfd_find_nearest_line): Just return false, don't abort. Tue Feb 7 14:43:33 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com) * ecoff.c: Reformatted some comments and brace constructs in recent changes to GNU style. (cmp_fdrtab_entry, mk_fdrtab, lookup): Use old-style function definitions. Tue Feb 7 14:21:28 1995 Ian Lance Taylor * ecoffswap.h (ecoff_swap_pdr_in): Zero out intern before setting any of the fields. Mon Feb 6 20:01:24 1995 Ken Raeburn Sat Feb 4 14:20:24 1995 David Mosberger-Tang * ecoffswap.h (ecoff_swap_pdr_in, ecoff_swap_pdr_out): added internalizing/externalizing new "prof" field. * libecoff.h (ecoff_tdata): added fdrtab. * ecoff.c (_bfd_ecoff_find_nearest_line): Fixed. Mon Feb 6 14:25:24 1995 Ian Lance Taylor * libelf.h (struct elf_link_hash_table): Add saw_needed field. * elfcode.h (elf_link_add_object_symbols): Set saw_needed if DT_NEEDED seen in .dynamic section. (elf_link_output_extsym): Warn if an undefined symbol is only referenced from a dynamic object, and not making a shared object, and saw_needed is false. * elf.c (_bfd_elf_link_hash_table_init): Initialize saw_needed. * libelf.h (ELF_LINK_HASH_DEFINED_WEAK): Don't define. * elfcode.h (elf_link_add_object_symbols): Don't clear or set ELF_LINK_HASH_DEFINED_WEAK. (elf_link_output_extsym): Don't check ELF_LINK_HASH_DEFINED_WEAK. Distinguish a weak defined symbol from a regular defined symbol. * linker.c (enum link_action): Add DEFW. (link_action): Add bfd_link_hash_defweak column. (_bfd_generic_link_add_one_symbol): Add DEFW case. Handle bfd_link_hash_defweak in a few other cases. * Many files (bfd_link_hash_undefweak): Renamed from bfd_link_hash_weak. * aoutx.h (aout_link_write_symbols): Handle bfd_link_hash_defweak. (aout_link_write_other_symbol): Likewise. (aout_link_input_section_std): Likewise. (aout_link_input_section_ext): Likewise. * bout.c (get_value): Likewise. * coff-a29k.c (coff_a29k_relocate_section): Likewise. * coff-alpha.c (alpha_convert_external_reloc): Likewise. (alpha_relocate_section): Likewise. * coff-mips.c (mips_relocate_section): Likewise. (mips_relax_section): Likewise. (bfd_mips_ecoff_create_embedded_relocs): Likewise. * cofflink.c (coff_write_global_sym): Likewise. (_bfd_coff_generic_relocate_section): Likewise. * ecoff.c (ecoff_link_add_externals): Likewise. (ecoff_link_write_external): LIkewise. * elf32-hppa.c (elf32_hppa_relocate_section): Likewise. (elf32_hppa_size_stubs): Likewise. * elf32-i386.c (elf_i386_adjust_dynamic_symbol): Likewise. (elf_i386_relocate_section): Likewise. (elf_i386_finish_dynamic_symbol): Likewise. * elf32-mips.c (mips_elf_output_extsym): Likewise. (mips_elf_relocate_section): Likewise. * elf32-sparc.c (elf32_sparc_adjust_dynamic_symbol): Likewise. (elf32_sparc_relocate_section): Likewise. * elfcode.h (elf_link_add_object_symbols): Likewise. (elf_adjust_dynamic_symbol): Likewise. (elf_bfd_final_link): Likewise. (elf_link_output_extsym): Likewise. * i386linux.c (linux_add_one_symbol): Likewise. (linux_tally_symbols): Likewise. (linux_finish_dynamic_link): Likewise. * linker.c (_bfd_generic_link_output_symbols): Likewise. (set_symbol_from_hash): Likewise. * reloc16.c (bfd_coff_reloc16_get_value): Likewise. (bfd_perform_slip): Likewise. * sunos.c (sunos_add_one_symbol): Likewise. (sunos_scan_std_relocs): Likewise. (sunos_scan_ext_relocs): Likewise. (sunos_scan_dynamic_symbol): Likewise. (sunos_write_dynamic_symbol): Likewise. Mon Feb 6 03:20:17 1995 Ken Raeburn Changes from Bryan Ford, baford@schirf.cs.utah.edu: * config.bfd (i[345]86-*-msdos*): New target. * configure.in (i386msdos_vec): Handle it. * i386msdos.c: New file. * config/i386-msdos.mt: New file. * bfd.c (enum bfd_error): Added new value bfd_error_file_too_big. (bfd_errmsgs): Added string to table. * libaout.h (reloc_type-lookup): Declare it. * targets.c (enum bfd_flavour): Added bfd_target_msdos_flavour. (i386msdos_vec): Declare. (bfd_target_vector): Add it to the list. * bfd-in2.h: Regenerated. Wed Feb 1 01:32:14 1995 Jeff Law (law@snake.cs.utah.edu) * som.c (som_set_reloc_info, case R_DATA_ONE_SYMBOL): If there's nothing in R_DATA_OVERRIDE, then try to find the addend in the section's contents. (som_write_fixups): Ignore the addend in a R_DATA_ONE_SYMBOL fixup. * som.c (som_object_setup): More heruistics to detect the braindamaged HP OSF1 linker. (setup_sections): Don't forget to free subspace_sections if we get an error. (som_slurp_string_table): Allocate strings on this bfd's obstack rather than directly out of the heap. (som_slurp_symbol_table): Likewise for the saved copy of the canonical symbols. (som_slurp_reloc_table): Likewise for the saved copy of the canonical relocations. Free the native relocations when we're done with them. Tue Jan 31 21:53:28 1995 Doug Evans * libelf.h (struct elf_obj_tdata): New member program_header_size. * elfcode.h (get_program_header_size): New parameters sorted_hdrs, count, and maxpagesize. All callers updated. If sorted_hdrs is non-NULL, use it to compute the number of segments. Save result in case called again. (assign_file_positions_except_relocs): Sort headers before calling get_program_header_size. Tue Jan 31 15:27:53 1995 Ian Lance Taylor * elfcode.h (map_program_segments): Add sorted_hdrs parameter. Search through it rather than through unsorted section headers. (assign_file_positions_except_relocs): Pass sorted_hdrs to map_program_segments. Mon Jan 30 22:04:53 1995 Ken Raeburn * ecoff.c (_bfd_ecoff_find_nearest_line): Fix problems in range checking. Expect argument OFFSET to be section-relative. From David Mosberger-Tang, davidm@piston.cs.arizona.edu. Mon Jan 30 11:22:11 1995 Ian Lance Taylor * elfcode.h (NAME(bfd_elf,record_link_assignment)): Don't do anything if we are not linking an ELF file. (NAME(bfd_elf,size_dynamic_sections)): Likewise. Sat Jan 28 12:48:57 1995 Jeff Law (law@snake.cs.utah.edu) * som.c (compare_subspaces): New function to sort subspaces by their location in the object file. (setup_sections): When computing the index for each subspace, handle case where setup_sections reads the subspaces in a different order that they appear in the object file. (som_is_space): Also examine the output section for the containing section. (som_is_subspace, som_is_container): Likewise. (som_begin_writing): Don't prepare or write fixups here. When writing the symbol strings, use the unsorted symbol table. (som_write_object_contents): Don't write the symbol table here. (som_finish_writing): Prepare and write the fixups here. Likewise for the symbol table. (som_bfd_derive_misc_symbol_info): Undefined symbols always have type SS_UNSAT regardless of BSF_EXPORT. (som_set_reloc_info): Unpack and attach argument location information for R_PCREL_CALL and R_ABS_CALL relocations. * som.c (som_object_setup): New heuristic to determine if the entry and flags fields are switched in the exec header. Sat Jan 28 00:16:01 1995 Ian Lance Taylor * elfcode.h (elf_link_add_object_symbols): Use *sym_hash instead of h if we might not be doing an ELF link. Fri Jan 27 16:13:42 1995 Ian Lance Taylor * elf32-mips.c (mips_elf_final_link): If the size of an input .reginfo section is zero, force it to the correct size, since the linker emulation code may have clobbered it. * elfcode.h (elf_sort_hdrs): Correct SHF_ALLOC test. (assign_file_positions_except_relocs): Free sorted_hdrs. Thu Jan 26 09:00:12 1995 Steve Chamberlain * srec.c (srec_set_section_contents): Fix off by one end address calculation. * config.bfd: (m68*-est-coff): New configuration. Thu Jan 26 11:39:21 1995 Ian Lance Taylor * elfcode.h (elf_link_add_object_symbols): Only examine weakdef if we are using an ELF hash table. * aoutx.h (NAME(aout,some_aout_object_p)): Always set EXEC_P if the start address is in the .text section, even if STAT_FOR_EXEC is set. Just use STAT_FOR_EXEC as an additional test. Thu Jan 26 11:12:54 1995 Michael Meissner * elfcode.h (prep_headers): Use EM_PPC instead of EM_CYGNUS_POWERPC. * elf32-ppc.c (reloc_type): Add all System V.4 and eABI relocations currently defined. (powerpc_reloc_map): Adjust to new relocation names. (elf_powerpc_howto_table): Add most of the new relocations. (ELF_MACHINE_CODE): Use EM_PPC instead of EM_CYGNUS_POWERPC. * config.bfd: Add support for powerpc-*-eabi. * config/ppc-elf.mt: Add rs6000 architecture support to the PowerPC. Also add XCOFF support. Wed Jan 25 23:26:13 1995 Ian Lance Taylor * coff-sh.c (CALC_ADDEND): Don't define. (coff_sh_relocate_section): Remove. (coff_relocate_section): Use _bfd_coff_generic_relocate_section. Tue Jan 24 14:22:47 1995 Ian Lance Taylor * elf32-mips.c (mips_elf_output_extsym): Set the value of the ECOFF symbol from the hash table entry. Mon Jan 23 14:53:35 1995 Steve Chamberlain * coff-sh.c (coff_sh_relocate_section): Don't subtract vma twice. Mon Jan 23 13:33:18 1995 Ian Lance Taylor * coff-sh.c (sh_reloc): Don't ignore the previous contents of an R_SH_IMM32 reloc. * config.bfd (i[345]86-*-gnu*): Set bfd_name to i386-gnu. * config/i386-gnu.mt: New file. Include ELF support. * opncls.c (bfd_openstreamr): Call bfd_cache_init. Fri Jan 20 11:44:45 1995 Ian Lance Taylor * sunos.c (sunos_add_one_symbol): Only set the sunos specific fields if we are doing a sunos link. Wed Jan 18 12:28:17 1995 Ian Lance Taylor * cpu-h8300.c (h8300_info_struct): Change name from "H8/300" to "h8300" for consistency with other cpu-* files. (h8300h_info_struct): Change name from "H8/300H" to "h8300h". * coff-h8300.c (special): Remove unused variable diff. Tue Jan 17 10:52:32 1995 Ian Lance Taylor * bfd-in.h (bfd_byte, reloc_howto_type): Define here, not... * reloc.c (bfd_byte, reloc_howto_type): here. * Changed all occurrences of ``const struct reloc_howto_struct'' to be ``reloc_howto_type'' instead. * bfd-in2.h, libbfd.h, libcoff.h: Rebuilt. * opncls.c (bfd_openstreamr): New function. * bfd-in2.h: Rebuilt. * elf32-mips.c (enum reloc_type): Define new relocs used on Irix. (elf_mips_howto_table): Add entries for new relocs. (mips_elf_section_from_shdr): Handle SHT_MIPS_MSYM, SHT_MIPS_DWARF, and SHT_MIPS_EVENTS. (mips_elf_fake_sections): Handle sections named .msym, .debug_* and .MIPS.events.*. * srec.c (srec_init): Remove unused local variable i. Sat Jan 14 19:09:48 1995 Steve Chamberlain * archures.c, Makefile.in, targets.c, bfd-in2.h, coffcode.h, config.bfd, configure.in, config/w65.mt: Initial support for the W65. Sun Jan 15 13:57:45 1995 Steve Chamberlain * opncls.c (bfd_fdopenr): Configure for WIN32. Thu Jan 12 16:30:47 1995 Ken Raeburn * Makefile.in (diststuff): Include `headers'. * sunos.c (m68k_plt_first_entry, sparc_plt_first_entry): Now const. * tekhex.c (digs): Ditto. * elf32-i386.c (elf_i386_plt0_entry, elf_i386_plt_entry): Ditto. * srec.c, tekhex.c: Include libiberty.h. Delete static array hex_value and replace references to it with references to hex_init, hex_p, and hex_value. * Makefile.in: Updated dependencies. * archures.c (archures_init_table): Now const. (bfd_arch_init): Adjusted type of local var `ptable'. start-sanitize-rce * Makefile.in (ALL_MACHINES): Include cpu-rce.o. (BFD32_BACKENDS): Include aout-rce.o. end-sanitize-rce start-sanitize-arc * Makefile.in (ALL_MACHINES): Include cpu-arc.o. (BFD32_BACKENDS): Include elf32-arc.o. end-sanitize-arc Thu Jan 12 09:33:24 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * hosts/symmetry.h: Redefine `shared' to enable compilation with the native Dynix cc compiler. * i386dynix.c: Include aoutx.h instead of using routines from aout32.c. Wed Jan 11 21:31:41 1995 Ken Raeburn * reloc.c (reloc_howto_type): Make typedef include `const'. * aout-ns32k.c, aoutx.h, bout.c, cf-m68klynx.c, coff-i386.c, coff-i960.c, coff-m68k.c, cofflink.c, cpu-ns32k.c, ecoff.c, elf32-hppa.c, elf32-i386.c, elf32-mips.c, elf32-sparc.c, elfcode.h, libbfd-in.h, linker.c, mipsbsd.c, nlm32-ppc.c, oasys.c, reloc.c, som.c: Don't use `const' in combination with `reloc_howto_type'. start-sanitize-arc * elf32-arc.c: Ditto. end-sanitize-arc * bfd-in2.h, libbfd.h: Regenerated. * ecoff.c (ecoff_type_to_string): Local variable `buffer1' doesn't need to be static. Wed Jan 11 14:36:41 1995 Ian Lance Taylor * sunos.c (sunos_add_one_symbol): Don't core dump if a multiple definition of an absolute symbol is encountered. * linker.c (_bfd_generic_link_add_one_symbol): Ignore redefinitions of an absolute symbol to the same value. Mon Jan 9 15:51:32 1995 Ian Lance Taylor * elfcode.h (elf_link_add_object_symbols): It's reasonable for no flags to be set, so don't insist otherwise. Fri Jan 6 16:39:40 1995 Ian Lance Taylor * elfcode.h (elf_slurp_symbol_table): Don't set BSF_GLOBAL for an undefined or common symbol. (elf_link_add_object_symbols): Likewise. Wed Jan 4 14:14:05 1995 Jeff Law (law@snake.cs.utah.edu) * som.c (bfd_section_from_som_symbol): Only return sections which correspond to subspaces. * som.c (som_begin_writing): Don't forget to bump the total_subspaces when writing the unloadable subspaces. Wed Dec 28 20:54:47 1994 Jeff Law (law@snake.cs.utah.edu) * som.c (som_write_fixups): Use SEC_HAS_CONTENTS to identify bss-like sections. (som_get_section_contents): Likewise. (som_set_section_contents): Likewise. Tue Dec 27 14:03:47 1994 Jeff Law (law@snake.cs.utah.edu) * som.c (setup_sections): Turn off SEC_HAS_CONTENTS for bss-like sections. Tue Dec 20 15:30:12 1994 Ken Raeburn * coffgen.c (bfd_debug_section): Deleted. (coff_section_from_bfd_index): Return absolute section for debug symbol. (coff_write_symbol): Set BSF_DEBUGGING for C_FILE symbols. If BSF_DEBUGGING is set, set section to N_DEBUG. (coff_bfd_make_debug_symbol): Use absolute section. * elfcode.h (assign_file_positions_except_relocs): In assertion, force all values to the same type. Tue Dec 20 11:11:58 1994 Steve Chamberlain (sac@jonny.cygnus.com) * coff-h8300.c (howto_table): All relocs get a special function. (special): Never do anything when linking -r. Tue Dec 20 13:58:01 1994 Ian Lance Taylor * i386linux.c (linux_add_one_symbol): Don't do anything Linux specific if this is not a Linux hash table. From Eric Youngdale . Patches from kkojima@mix.or.jp (Kazumoto Kojima): * mipsbsd.c (mips_howto_table_ext): Change sizes of memory relocs apply to from two bytes to four bytes. * MY(reloc_howto_type_lookup): Handle BFD_RELOC_CTOR. * elf32-i386.c (elf_i386_relocate_section): Correct and expand the list of cases for which relocation need not be computed. * elf32-sparc.c (elf32_sparc_relocate_section): Likewise. start-sanitize-arc Tue Dec 20 09:01:01 1994 Doug Evans * elf32-arc.c (elf_arc_howto_table, R_ARC_B22_PCREL): Value is right-shifted 2 bits. Fix dst_mask. end-sanitize-arc Mon Dec 19 23:09:16 1994 Jeff Law (law@snake.cs.utah.edu) * elf32-hppa.c (elf32_hppa_read_symext_info): Delete do_locals and do_globals arguments, always read symbol extension information for globals and locals. All callers changed. (elf32_hppa_size_stubs): Rework to only read symbol extension information once for each input bfd. 10% improvement in linker performance. Fri Dec 16 12:28:46 1994 Ian Lance Taylor * elfcode.h (elf_section_from_bfd_section): Check bfd_is_abs_section, etc., only after checking for the section in the BFD and after calling the backend routine. Wed Dec 14 20:21:58 1994 Ian Lance Taylor * elfcode.h (elf_map_symbols): Only use section symbols whose value is the start of the section, checking output_offset when using output_section. When creating a new symbol, set the value to 0, since BFD symbol values are section relative. Tue Dec 13 13:31:06 1994 Ian Lance Taylor * cpu-z8k.c (arch_info_struct): Make z8002 the default architecture. Fri Dec 9 12:43:05 1994 Ian Lance Taylor * elfcode.h (elf_bfd_link_add_symbols): If the first object in the archive is not an ELF object, pass the archive to the add_symbols entry point appropriate for the first object. From Eric Youngdale . * aoutx.h (NAME(aout,link_add_symbols)): Similar change if the first object is not an a.out object. * elf32-i386.c (elf_i386_relocate_section): Don't compute relocation in cases where we won't use it. * elf32-sparc.c (elf32_sparc_relocate_section): Likewise. Thu Dec 8 14:19:41 1994 Ken Raeburn * pc532-mach.c (NAME): Define to use ns32kaout prefix. * ns32knetbsd.c (NAME): Ditto. (ns32kaout_32_get_section_contents): Define to standard aout-32 version. Fri Dec 2 13:56:49 1994 Ian Lance Taylor * coff-mips.c (mips_read_relocs): New static function, broken out of mips_relax_section. (mips_relax_section): Call mips_read_relocs. (bfd_mips_ecoff_create_embedded_relocs): New function. * bfd-in.h (bfd_mnips_ecoff_create_embedded_relocs): Declare. * bfd-in2.h: Rebuild. Wed Nov 30 14:12:55 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * coff-sh.c: Use _bfd_dummy_target instead of no_archive. start-sanitize-arc Tue Nov 29 17:14:21 1994 Doug Evans * archures.c: Initial support for the ARC. * reloc.c, targets.c, config.bfd, configure.in, elfcode.h: Likewise. * bfd-in2.h: Regenerated. * libbfd.h: Likewise. * config/arc-elf.mt: New file. end-sanitize-arc Tue Nov 29 14:00:19 1994 J.T. Conklin * config.bfd (i[345]86-*-freebsd*): Use i386-bsd as bfd_name. * configure.host (i[345]86-*-freebsd*): Use i386bsd as my_host. Mon Nov 28 15:36:04 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * config/m68k-nbsd.mt (DEFAULT_VECTOR): set to m68knetbsd_vec. * Makefile.in: Rebuilt dependancies. (CFILES): Added m68knetbsd.c. (HFILES): Added netbsd.h. Wed Nov 23 19:21:41 1994 Steve Chamberlain (sac@jonny.cygnus.com) * coff-sh.c (shlcoff_vec): New target vector. (no_archive): New function. * coffcode.h (coff_set_arch_mach_hook, coff_set_flags): Handle little endian SH. * configure.in: Handle shl. * targets.c (bfd_target_vector): Add shlcoff_vec. * config/sh-coff.mt (SELECT_VECS): Handle shl_coff_vec. Wed Nov 23 10:50:13 1994 Jeff Law (law@snake.cs.utah.edu) * elfcode.h (write_relocs): Do not subtract the section's vma from the reloc's offset when writing .o's. Instead add the section's vma to the reloc's offset when writing an executable or shared library. Tue Nov 22 23:34:37 1994 Jeff Law (law@snake.cs.utah.edu) * elf32-hppa.c (elf32_hppa_bfd_final_link_relocate): Do not add input_section->vma to the relocation's offset. Mon Nov 21 12:37:25 1994 Ian Lance Taylor * srec.c (srec_get_reloc_upper_bound): Define. (srec_canonicalize_reloc): Define. (srec_bfd_reloc_type_lookup): Define. (srec_vec, symbolsrec_vec): Use BFD_JUMP_TABLE_RELOCS (srec). Sat Nov 19 03:10:51 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * configure.host (i[345]86-*-solaris*): Use solaris2 to enable extraction of procfs info from core file for GDB. Thu Nov 17 17:37:39 1994 Ken Raeburn * reloc.c (bfd_reloc_code_type): Add new value BFD_RELOC_12_PCREL. * bfd-in2.h, libbfd.h: Rebuilt. Thu Nov 17 13:12:08 1994 Jeff Law (law@snake.cs.utah.edu) * bfd/elf32-hppa.c (elf32_hppa_bfd_final_link_relocated): Use the vma from the output_section containing $global$ when computing global_vlaue. Thu Nov 17 14:29:13 1994 Ian Lance Taylor * archive.c (_bfd_write_archive_contents): Round up the archive header size of the extended name table to an even number. Wed Nov 16 16:08:06 1994 Ken Raeburn * coff-sh.c: Deleted some code that was commented out or inside "#if 0". (COFF_LONG_FILENAMES): Define. * cpu-sh.c (arch_info_struct): Convert name to lowercase, for consistency with other architectures. Sat Nov 12 23:50:10 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * elfcode.h (elf_export_symbol): Also export symbols which are referenced by a regular file. Fri Nov 11 14:29:31 1994 Ian Lance Taylor * elfcode.h (NAME(bfd_elf,size_dynamic_sections)): Add export_dynamic argument, and handle it. (elf_export_symbol): New function. * bfd-in.h (bfd_elf32_size_dynamic_sections): Update declaration. (bfd_elf64_size_dynamic_sections): Update declaration. * bfd-in2.h: Rebuild. Fri Nov 11 10:35:33 1994 Jeff Law (law@snake.cs.utah.edu) * hpux-core.c (hpux_core_struct): Delete handles for the data, reg and stack sections. They're never used. Delete accessor macros. (make_bfd_asection): Use bfd_make_section_anyway since debugging cores from dynamic executables may have several sections with the same logical name. (hpux_core_core_file_p): Don't save handles to data, reg and stack sections. Handle CORE_TEXT, CORE_MMF and CORE_SHM. Tue Nov 8 13:03:30 1994 Ian Lance Taylor * bout.c (callj_callback): Add new argument shrinking. Change all callers. Handle relocs against section symbols correctly. If not shrinking, don't subtract out dstidx; the subtraction is already in the object file. Sun Nov 6 12:52:00 1994 Jeff Law (law@snake.cs.utah.edu) * som.h: Conditionally include and . Thu Nov 3 18:19:13 1994 Ken Raeburn * Makefile.in (ALL_MACHINES): Include m68knetbsd.o. * config/i386linux.mh (EXTRALIBS): Include -lm. Patches from DJ Delorie: * coff-go32.c: Replacement file, uses coff-i386.c with minor changes. * coff-i386.c (TARGET_UNDERSCORE): allow other files to override underscore also * makefile.dos: del ctor.o, add cofflink.o and elf32.o * aoutx.h (adjust_o_magic): If user set data section vma, use it to determine the default bss vma. Patch from Takada Hiroaki, hiro@is.s.u-tokyo.ac.jp. (machine_type, case bfd_arch_vax): Set *unknown to false. Patch from John David Anglin . * configure.in (tb): Rename ns32knetbsd_vec to pc532netbsd_vec, since that's what it's called. Wed Nov 2 15:24:51 1994 Ian Lance Taylor * archive.c (normalize): Change to take a BFD as an argument. Change VMS version to use bfd_alloc rather than malloc, so that we don't lose the memory forever. (_bfd_construct_extended_name_table): Check the name of an archive entry which is not being extended, and correct it if it is wrong. This is necessary in case the archive was constructed by another program which put an entry in the extended name table which we don't plan to put in ourselves. From jjc@jclark.com (James Clark). (bfd_dont_truncate_arname): Check return value of normalize. Mon Oct 31 14:19:08 1994 Ian Lance Taylor * elf32-hppa.c (ELF32_PARISC_SX_SIZE): Define. (ELF32_PARISC_SX_GET, ELF32_PARISC_SX_PUT): Define. (symextn_entry): Don't define. (symext_chain_size): Change type to bfd_size_type. (symextn_contents): Change type to bfd_byte *. (elf32_hppa_backend_begin_write_processing): Use ELF32_PARISC_SX_SIZE instead of sizeof (symext_entryS). (elf32_hppa_size_symext): Likewise. Also, change type of sizep to bfd_size_type *. (elf_hppa_tc_make_sections): Cast symextn_contents assignment to bfd_byte *. Use ELF32_PARISC_SX_PUT instead of direct assignment. (elf32_hppa_backend_symbol_table_processing): Use ELF32_PARISC_SX_SIZE instead of sizeof (symext_entryS). Use ELF32_PARISC_SX_GET insetad of direct assignment. (elf32_hppa_read_symext_info): Change type of contents, and its assignment cast, to bfd_byte *. Use ELF32_PARISC_SX_SIZE instead of sizeof (symextn_entry). Use symext_entryS instead of symextn_entry. Use ELF32_PARISC_SX_GET instead of direct assignment. * archive.c (bfd_dont_truncate_arname): Add the ar padding character, if there is room for it, even if the name is the maximum length. * elfcode.h (assign_file_positions_except_relocs): Sort the ELF headers by section address when assigning file positions. (elf_sort_hdrs): New static function. Sun Oct 30 18:56:58 1994 Ian Lance Taylor * elfcode.h (NAME(bfd_elf,size_dynamic_sections)): Create DT_INIT and DT_FINI dynamic entries based on the existence of _init and _fini symbols, not on the .init and .fini sections. This is compatible with some SVR4 linkers. (elf_bfd_final_link): Corresponding change. Sat Oct 29 12:18:10 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * elf32-i386.c (elf_i386_adjust_dynamic_symbol): Don't move a symbol with a PLT entry into the .plt section if it is defined in a regular file. * elf32-sparc.c (elf32_sparc_adjust_dynamic_symbol): Likewise. * linker.c (_bfd_generic_link_add_archive_symbols): It's not an error if an empty archive has no symbol table. * ecoff.c (ecoff_link_add_archive_symbols): Likewise. * elfcode.h (elf_link_add_archive_symbols): Likewise. Fri Oct 28 10:08:41 1994 J.T. Conklin (jtc@rtl.cygnus.com) NetBSD/m68k support, based on work by mikeb@snow.datametrics.com: * config.bfd (m68*-*-netbsd*): Use m68k-nbsd as bfd_name. * configure.in (m68knetbsd_vec): Added. * targets.c (bfd_m68knetbsd_vec): Added. * hosts/m68knbsd.h, config/m68k-nbsd.mt, m68knetbsd.c: New files. * Makefile.in (BFD32_BACKENDS, CFILES): Add m68knetbsd.c. miscellaneous cleanup required by all netbsd targets, based on work by Andrew Cagney : * netbsd.h (N_MAGIC, N_SET_MAGIC, N_GETMAGIC, N_GETMAGIC2, N_TXTADDR, N_TXTOFF, N_ALIGN, N_DATADDR, N_DATOFF): Removed. Generic a.out definitions work. * i386nbsd.c, ns32knbsd.c, sparcnbsd.c (__LDPGSZ): Removed. (MY(write_object_contents)): Use NetBSD's magic numbers Thu Oct 27 16:59:52 1994 Ian Lance Taylor * libelf.h (struct bfd_elf_section_data): Add field dynindx. * elfcode.h (NAME(bfd_elf,size_dynamic_sections)): Don't finalize the .dynsym, .dynstr or .hash sections until after the backend size_dynamic_sections routine, so that it can add dynamic symbols if it wants to. * elf32-i386.c (elf_i386_adjust_dynamic_symbol): Don't define the symbol to be in the .plt section when generating a shared library if it is a defined symbol. * elf32-sparc.c (elf32_sparc_adjust_dynamic_symbol): Likewise. (elf32_sparc_size_dynamic_sections): When generating a shared library, allocate space for a dynamic symbol for each output section, storing the index in the dynindx field of the ELF section data. Adjust the other dynindx fields to account for this. (elf32_sparc_adjust_dynindx): New static function. (elf32_sparc_relocate_section): When copying a reloc into a shared library, use the original addend as appropriate. Convert an R_SPARC_32 reloc into an R_SPARC_RELATIVE reloc. Use the dynamic symbol index of the output section, not the normal symbol index. (elf32_sparc_finish_dynamic_sections): Don't die if a section does not exist when setting the value of the dynamic tags. Write out a dynamic symbol for each output section. Wed Oct 26 01:15:51 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * aoutx.h (aout_link_input_section): Don't bother to read or write the relocs if there aren't any. Tue Oct 25 11:44:38 1994 Ian Lance Taylor * Makefile.in (ALL_MACHINES): Add tekhex.o. * targets.c (bfd_target_vector): If SELECT_VECS is not defined, include tekhex_vec. * tekhex.c (NIBBLE, ISHEX): Cast array arguments to unsigned char. (getvalue, getsym, out): Likewise. (find_chunk): Remove unused variable s. (first_phase): Remove unused variable s. (pass_over): Remove unused variable address. (tekhex_object_p): Remove unused variable section. (move_section_contents): Change return type from boolean to void. (tekhex_write_object_contents): Remove unused variables tdata and list. * linker.c (enum link_action): Add CIND. (link_action): Change COMMON_ROW\indr from MDEF to CREF. Change INDR_ROW\common from MDEF to CIND. (_bfd_generic_link_add_one_symbol): In CREF case, handle an existing symbol which is indirect rather than defined. Add new CIND case. Mon Oct 24 15:33:16 1994 Ian Lance Taylor Change S-record backend to use multiple sections to handle gaps in file. * srec.c (srec_data_list_struct): Move field next from last place to first. Change type of data to bfd_byte *. (struct srec_symbol): Define. (tdata_type): Remove done_symbol_read, count, strings, symbol_idx, string_size, string_idx. Change type of symbols to struct srec_symbol *. Add symtail and csymbols. (low, high): Remove. (size_symbols, fillup_symbols, size_srec, fillup): Remove. (white, skipwhite, pass_over, object_p): Remove. (srec_mkobject): Call srec_init. Adjust tdata initialization for field changes. (srec_get_byte, srec_bad_byte): New static functions. (srec_new_symbol, srec_scan): New static functions. (srec_object_p): Change type of b to bfd_byte. Explicitly set wrong_format error. Call srec_mkobject and srec_scan instead of object_p. (symbolsrec_object_p): Likewise. Also, change b to be only two bytes. (srec_read_section): New static function. (srec_get_section_contents): Call srec_read_section rather than pass_over. Handle zero length section correctly. (set_set_arch_mach): Change from function to macro. (srec_set_section_contents): Change data to bfd_byte *. (srec_write_record): Change data, end and src to bfd_byte *. (srec_write_header): Change buffer and dst to bfd_byte *. (srec_write_section): Change location to bfd_byte *. (srec_write_terminator): Change buffer to bfd_byte *. (srec_get_symtab_upper_bound): Don't call srec_get_section_contents. (srec_get_symtab): Rewrite. * ecoff.c (ecoff_set_symbol_info): Set udata.i to 0, not NULL. Fri Oct 21 16:43:13 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * libaout.h (machine_type): added M_68K_NETBSD and M_SPARC_NETBSD. * i386netbsd.c, ns32knetbsd.c, sparcnetbsd.c: removed RCS Id's. changed how PAGE_SIZE and SEGMENT_SIZE are defined so they are consistant with each other. * netbsd.h (N_HEADER_IN_TEXT, TEXT_START_ADDR): NetBSD fits its header into the start of its text segment. Fri Oct 21 17:13:07 1994 Ian Lance Taylor * targets.c (BFD_JUMP_TABLE_ARCHIVE): Add case for _construct_extended_name_table. (bfd_target): Add _bfd_construct_extended_name_table. * archive.c (_bfd_archive_bsd_construct_extended_name_table): New function. (_bfd_archive_coff_construct_extended_name_table): New function. (_bfd_construct_extended_name_table): Renamed by adding a leading underscore, and made externally visible. Added trailing_slash argument, and used it instead of elf_style. Changed type of tablen to bfd_size_type *. (_bfd_write_archive_contents): Use BFD_SEND to call construct_extended_name_table. Use the returned name. * libbfd-in.h (_bfd_construct_extended_name_table): Declare. (_bfd_noarchive_construct_extended_name_table): Define. (_bfd_archive_bsd_construct_extended_name_table): Declare. (_bfd_archive_coff_construct_extended_name_table): Declare. * bfd-in2.h: Rebuild. * libbfd.h: Rebuild. * som.c (som_construct_extended_name_table): New static function. * aout-target.h (MY_construct_extended_name_table): Define. * coff-rs6000.c (rs6000coff_construct_extended_name_table): Define. * ieee.c (ieee_construct_extended_name_table): Define. * libecoff.h (_bfd_ecoff_construct_extended_name_table): Define. * oasys.c (oasys_construct_extended_name_table): Define. Fix the ELF linker to not require an interpreter if no dynamic objects were seen, even when linking PIC code. * libelf.h (ELF_LINK_HASH_NEEDS_PLT): Define. (struct elf_link_hash_table): Add field dynamic_sections_created. * elfcode.h (elf_link_record_dynamic_symbol): Create dynstr if it doesn't already exist. (elf_link_add_object_symbols): Create dynamic sections based on dynamic_sections_created field, not dynobj field. Don't bother to set dynobj. (elf_link_create_dynamic_sections): If dynamic sections were already created, don't do anything. If dynobj is already set, use it; otherwise, set it to the bfd argument. Don't initialize dynsymcount. Only create dynstr if it does not exist. Set dynamic_sections_created to true. (NAME(bfd_elf,size_dynamic_sections)): Skip most of this function if no dynamic objects were seen. (elf_adjust_dynamic_symbol): If a symbol has the ELF_LINK_HASH_NEEDS_PLT flag set, let the backend adjust it. (elf_bfd_final_link): Change most decisions based on dynobj to check dynamic_sections_created instead. (elf_link_output_extsym): Only handle dynamic symbols if a dynamic object was seen. * elf.c (_bfd_elf_link_hash_table_init): Initialize new field dynamic_sections_created. Set dynsymcount to 1, not 0. * elf32-i386.c (elf_i386_create_dynamic_sections): Call elf_i386_create_got_section rather than creating the .got and .got.plt sections. (elf_i386_create_got_section): New static function. (elf_i386_check_relocs): Just call elf_i386_create_got_section if a GOT table is needed, not bfd_elf32_link_create_dynamic_sections. Only create the .rel.got section, and only make space for a reloc, for a global symbol or when generating a shared object. For a R_386_PLT32 reloc, just set the ELF_LINK_HASH_NEEDS_PLT flag. (elf_i386_adjust_dynamic_symbol): Rework initial assertion to permit ELF_LINK_HASH_NEEDS_PLT non dynamic symbols. Create a procedure linkage table entry for such symbols. But, if no dynamic objects were seen, never create a PLT entry. (elf_i386_size_dynamic_sections): If no dynamic objects were seen, skip most of this function, and force the size of the .rel.got section to zero. (elf_i386_relocate_section): For a R_386_GOT32 reloc against a global symbol when no dynamic object was seen, initialize the contents of the .got section. For a R_386_GOT32 against a local symbol, only create a R_386_RELATIVE reloc when generating a shared object. Treat a R_386_PLT32 reloc against a symbol for which we did not create a PLT entry as a R_386_PC32 reloc. (elf_i386_finish_dynamic_sections): Only fiddle with the dynamic entries and the PLT if we saw a dynamic object. * elf32-sparc.c (elf_sparc_howto_table): Fix R_SPARC_PC22 by setting rightshift to 10. Fix R_SPARC_WPLT20 by setting rightshift to 2, size to 2, bitsize to 30, and dst_mask to 0x3fffffff. (elf32_sparc_create_dynamic_sections): Don't set the size of the .plt section. Call elf32_sparc_create_got_section rather than creating the .got section. (elf32_sparc_check_relocs): Call elf32_sparc_create_got_section if a GOT table is needed, not bfd_elf32_link_create_dynamic_sections. Only create the .rela.got section, and only make space for a reloc, for a global symbol or when generating a shared object. Set the alignment of the .rela.got section to 2. For a R_SPARC_WPLT30 reloc, just set the ELF_LINK_HASH_NEEDS_PLT flag. (elf32_sparc_adjust_dynamic_symbol): Rework initial assertion to permit ELF_LINK_HASH_NEDS_PLT non dynamic symbols. Create a procedure linkage table for such symbols. But, if no dynamic objects were seen, never create a PLT entry. Initialize the size of the .plt section. (elf32_sparc_size_dynamic_sections): If no dynamic objects were seen, skip most of this function, and force the size of the .rela.got section to zero. Strip empty reloc sections, and strip an empty .plt section. (elf32_sparc_relocate_section): For a GOT reloc against a global symbol when no dynamic object was seen, initialize the contents of the .got section. For a GOT reloc against a local symbol, only create a R_SPARC_RELATIVE reloc when generating a shared object. Treat a R_SPARC_WPLT30 reloc against a symbol for which we did not create a PLT entry as a R_SPARC_WDISP30 reloc. (elf32_sparc_finish_dynamic_sections): Only fiddle with the dynamic entries and the PLT if we saw a dynamic object. Thu Oct 20 13:28:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * elfcode.h (elf_map_symbols): Don't worry about section symbols in a section not owned by any BFD. (elf_section_from_bfd_section): Separate out loop which calls backend routine. Check bfd_section and call the backend routine even for a section not owned by any BFD. * elf32-mips.c (mips_elf_section_from_bfd_section): Handle .acommon section. Wed Oct 19 13:28:29 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * coffgen.c (coff_print_symbol): Make names for section number and storage class slightly more verbose. It's not clear how many characters I can justify using up, but before this change they both were abbreviated "sc" which is (IMHO) clearly unacceptable. Wed Oct 19 01:26:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * binary.c (binary_set_section_contents): Set the base file position from the lowest section VMA, not the start address. * aoutx.h (NAME(aout,slurp_symbol_table)): Don't return an error if there are no symbols. * coffgen.c (coff_get_normalized_symtab): Likewise. * hp300hpux.c (MY(slurp_symbol_table)): Likewise. Tue Oct 18 12:56:43 1994 Ian Lance Taylor * aout-target.h (MY_bfd_copy_private_section_data): Only copy subformat to another bfd_target_aout_flavour file. * binary.c: New file for raw binary output format. * Makefile.in (BFD_LIBS): Add binary.o. (CFILES): Add binary.c. * targets.c (binary_vec): Declare. (bfd_target_vector): Include binary_vec. * srec.c (tdata_type): Add field tail. (srec_mkobject): Initialize tail. (srec_set_section_contents): Sort S record list by address. Mon Oct 17 11:38:16 1994 Ian Lance Taylor * elfcode.h (elf_map_symbols): Sort the symbols into a new array, rather than messing with Elf_Sym_Extra. Store the symbol index in the udata.i field. (swap_out_syms): Use outbound_syms as a pointer rather than as an array. Don't worry about elf_sym_num. * libelf.h (struct elf_sym_extra): Don't define. (Elf_Sym_Extra): Don't define. (struct elf_obj_tdata): Remove sym_extra field. (elf_sym_extra): Don't define. * elf32-hppa.c (elf32_hppa_backend_final_write_processing): Use udata.i rather than elf_sym_extra array. * syms.c (asymbol): Change udata field into a union. * bfd-in2.h: Rebuild. * aoutx.h (NAME(aout,translate_symbol_table)): Use udata.p rather than just udata. * bout.c (perform_slip): Likewise. * hp300hpux.c (MY(slurp_symbol_table)): Likewise. * ieee.c (ieee_slurp_external_symbols): Likewise. * linker.c (generic_link_add_symbol_list): Likewise. (default_indirect_link_order): Likewise. * oasys.c (oasys_slurp_symbol_table): Likewise. * reloc16.c (bfd_perform_slip): Likewise. * srec.c (fillup_symbols): Likewise. * coffcode.h (get_index): Use udata.i rather than just udata. (coff_slurp_symbol_table): Likewise. * coffgen.c (set_index): Likewise. * ecoff.c (ecoff_set_symbol_info): Likewise. * elfcode.h (elf_symbol_from_bfd_symbol): Likewise. * libecoff.h (ecoff_get_sym_index, ecoff_set_sym_index): Likewise. * som.c (compare_syms): Likewise. (som_prep_for_fixups): Likewise. (som_write_fixups): Likewise. Use a hash table when writing out ELF symbol names. * elfcode.h (elf_stringtab_init): New static function. (bfd_new_strtab, bfd_add_to_strtab, bfd_add_2_to_strtab): Remove. Change all callers to use elf_stringtab_init or _bfd_stringtab_add, and get stringtab lengths using _bfd_stringtab_size. (elf_fake_sections): Change ignored argument to pointer to boolean, and set the boolean to true if an error occurs. If an error has already occurred, don't do anything. (assign_section_numbers): Just set sh_size, not contents. (elf_compute_section_file_positions): Pass the address of a boolean to elf_fake_sections. Pass the address of a bfd_strtab_hash to swap_out_syms. Write out the .strtab section. (prep_headers): Change shstrtab to bfd_strtab_hash. (swap_out_syms): Take a pointer to a bfd_strtab_hash as an argument. Set it to the symbol names. (NAME(bfd_elf,write_object_contents)): Write out the section header names using _bfd_stringtab_emit. (elf_debug_section): Remove first argument; get the section name via the bfd_section pointer. Change caller. (elf_bfd_final_link): Write out the symbol names using _bfd_stringtab_emit. Likewise for the .dynstr section contents. Free the symbol names at the end of the function. (elf_link_input_bfd): Remove the last argument, output_names, from relocate_section. Save the old symbol contents before calling elf_link_output_sym, and restore them afterward. * libelf.h (struct elf_link_hash_table): Change dynstr field to struct bfd_strtab_hash. (struct elf_backend_data): Remove last argument, output_names, from elf_backend_relocate_section field. (struct strtab): Don't define. (struct elf_obj_tdata): Change strtab_ptr field to struct bfd_strtab_hash. * elf32-hppa.c (elf32_hppa_relocate_section): Remove last argument, output_names. * elf32-i386.c (elf_i386_relocate_section): Likewise. * elf32-mips.c (mips_elf_relocate_section): Likewise. * elf32-sparc.c (elf32_sparc_relocate_section): Likewise. * libbfd-in.h (DEFAULT_STRING_SPACE_SIZE): Don't define. (bfd_add_to_string_table): Don't declare. * libbfd.h: Rebuild. * libbfd.c (bfd_add_to_string_table): Remove. * elfcode.h (elf_swap_shdr_in): Use bfd_section, not rawdata. Clear contents field. (bfd_section_from_shdr): In SHT_STRTAB case, check bfd_section, not rawdata. Don't set rawdata if e_shstrndx. Use bfd_section rather than rawdata in commented out code. In SHT_REL[A] case, don't bother to check elf_section_data of section returned by section_from_elf_index. (elf_fake_sections): Set bfd_section, not rawdata. Don't set size. (elf_map_symbols): Don't set elf_num_section_syms. Don't create section symbols that already exist. (assign_file_position_for_section): Use bfd_section, not rawdata. (section_from_elf_index): Just check bfd_section field. (elf_section_from_bfd_section): Likewise. (elf_debug_section): Don't print rawdata, contents, or size. (elf_link_add_object_symbols): Don't error out if section_from_elf_index returns NULL. (elf_bfd_final_link): Check return value from section_from_elf_index against NULL, not bfd_is_abs_section. (elf_link_input_bfd): Don't check section_from_elf_index return value. * libelf.h (struct elf_obj_tdata): Remove num_section_syms field. (elf_num_section_syms): Don't define. * elf.c (elf_get_str_section): Store section contents in contents field rather than rawdata field. (elf_string_from_elf_section): Likewise. (_bfd_elf_make_section_from_shdr): Store BFD section pointer in bfd_section field rather than rawdata field. * elf32-hppa.c (elf32_hppa_read_symext_info): Use bfd_section rather than rawdata. (elf32_hppa_size_stubs): Likewise. (elf32_hppa_backend_symbol_table_processing): Don't set symextn_hdr->size; just use sh_size. * elf32-mips.c (mips_elf_final_write_processing): Use bfd_section rathern than rawdata. (mips_elf_section_from_shdr): Likewise. (mips_elf_section_processing): Likewise. (mips_elf_section_from_bfd_section): Remove rawdata check. * srec.c (pass_over): Set the start address for S7, S8 or S9. Fri Oct 14 19:15:46 1994 Ken Raeburn * VERSION: Updated to 2.5. Fri Oct 14 11:07:50 1994 Ian Lance Taylor * bfd.c (bfd_scan_vma): Cast end to be non const before passing it to strtoul. Thu Oct 13 14:40:41 1994 Ian Lance Taylor * bfd.c (bfd_scan_vma): Pass end argument on to strtoul. Wed Oct 12 16:46:43 1994 Ken Raeburn * opncls.c (bfd_realloc): Deleted, since it's broken and fixing it would make it slow. Besides, it isn't used much. * elfcode.h (elf_map_symbols): Always allocate new storage for the symbol table. Wed Oct 12 11:54:37 1994 Ian Lance Taylor * ecoff.c (ecoff_set_symbol_info): Mark local stProc, stLabel or stabs symbols as BSF_DEBUGGING. * rs6000-core.c (rs6000coff_core_file_matches_executable_p): Make str1 and str2 const pointers. * Makefile.in (INSTALL): Use top level install.sh script. * config/README (INSTALL): Remove. * config/delta88.mh (INSTALL): Remove. * config/i386v4.mh (INSTALL): Remove. * config/irix4.mh (INSTALL): Remove. * config/irix5.mh (INSTALL): Remove. * config/ncrt3000.mh (INSTALL): Remove. Tue Oct 11 13:57:56 1994 Eric Youngdale (eric@andante.aib.com) * elf32-i386.c (elf_i386_check_relocs): Make sure that a symbol with a global offset table entry or a procedure linkage table entry is added to the dynamic symbol table. * elf32-sparc.c (elf32_sparc_check_relocs): Likewise. * elf32-i386.c (elf_i386_adjust_dynamic_symbol): If a symbol has already gotten a procedure linkage table entry, change the definition to the PLT entry. * elf32-sparc.c (elf32_sparc_adjust_dynamic_symbol): Likewise. Tue Oct 11 17:12:00 1994 Ian Lance Taylor * lynx-core.c (lynx_core_file_p): SPARC Lynx appears to start dumping the .data section in a core file at a page boundary. Mon Oct 10 16:24:44 1994 Ken Raeburn * cofflink.c (_bfd_coff_final_link): Cast argument to bfd_h_put_32 to correct type. (coff_read_string_table): Cast argument to bfd_h_get_32 to correct type. * elfcode.h (elf_link_output_extsym): Cast argument to bfd_elf_hash to correct type. * elf32-sparc.c (elf_sparc_howto_table): The PC10, PC22, and WPLT30 relocations are PC-relative. Thu Oct 6 12:57:26 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org) * aoutx.h (adjust_o_magic): Correctly initialize vma if the vma of the text section was user-defined. Wed Oct 5 14:42:12 1994 Ian Lance Taylor * archive.c (bfd_construct_extended_name_table): SVR4 uses slash newline at the end of the file name, not just newline. Tue Oct 4 11:23:12 1994 Ian Lance Taylor * ecoff.c (_bfd_ecoff_new_section_hook): Default section alignment power to 4, rather than using align_power_min. * coffcode.h (coff_new_section_hook): Don't use align_power_min; use COFF_DEFAULT_SECTION_ALIGNMENT_POWER instead. Force the .stab and .stabstr sections to be aligned to no more than 2. Remove COFF_SPARC special cases. * coff-a29k.c: Define COFF_DEFAULT_SECTION_ALIGNMENT_POWER. * coff-apollo.c, coff-go32.c, coff-h8300.c: Likewise. * coff-h8500.c, coff-i386.c, coff-i960.c, coff-m68k.c: Likewise. * coff-m88k.c, coff-rs6000.c, coff-sh.c, coff-sparc.c: Likewise. * coff-we32k.c, coff-z8k.c: Likewise. * configure.in: Use ${config_shell} when running config.bfd. * cofflink.c (coff_link_input_bfd): Don't try to convert a long filename if the offset field is zero. * elfcode.h (swap_out_syms): If the alignment of a common symbol was not set, use a sensible default rather than zero. Mon Oct 3 16:04:29 1994 H.J. Lu (hjl@nynexst.com) * opncls.c (bfd_close): Honor umask when setting execution bits. (bfd_close_all_done): Likewise. Mon Oct 3 04:41:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * rs6000-core.c (rs6000coff_core_p): Set SEC_HAS_CONTENTS flag for .stack and .ldinfo sections. Cast coredata.c_tab to a file_ptr to avoid warnings from gcc. Fri Sep 30 13:11:38 1994 Ian Lance Taylor * elfcode.h (elf_bfd_final_link): Remove assertion when a non SEC_IN_MEMORY section is found in dynobj. This can happen when linking PIC compiled code. Thu Sep 29 15:21:44 1994 Ken Raeburn * reloc.c (bfd_install_relocation): Change type of "data" to bfd_byte *, to go along with yesterday's change. * elf.c (bfd_elf_print_symbol): Moved here from elf_print_symbol in elfcode.h. (case bfd_print_symbol_all): Print symbol's size field, except for common symbols; print their alignment. * elfcode.h (elf_print_symbol): Deleted. * libelf.h (bfd_elf_print_symbol): Declare. (bfd_elf{32,64}_print_symbol): Replace declarations with macros. * syms.c (bfd_print_symbol_vandf): Show BSF_LOCAL and BSF_GLOBAL in one column. Use the column freed up to show BSF_FUNCTION and BSF_FILE. Thu Sep 29 12:29:01 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * syms.c (stt): Add .rdata and .rodata. Wed Sep 28 13:35:05 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * reloc.c (bfd_install_relocation): Cast data_start to bfd_byte * before trying to add values to it. Tue Sep 27 16:47:58 1994 Ken Raeburn * elf32-hppa.c (elf32_hppa_backend_final_write_processing): Cast return value from elf_sym_extra. (elf32_hppa_build_stubs): Cast return value from bfd_zalloc. (elf32_hppa_size_stubs): Cast return value from malloc. * gen-aout.c (main): Declare and initialize "arch". * cofflink.c (coff_link_add_symbols): Cast return value of bfd_hash_allocate. * riscix.c (riscix_callback): Use PARAMS macro in prototype. * reloc.c (bfd_install_relocation): New function, mostly copied from bfd_perform_relocation, adjusted for the assembler's needs. * bfd-in2.h: Regenerated. Mon Sep 26 11:00:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * elfcode.h (assign_file_positions_except_relocs): Align the section VMA and the file position even if D_PAGED is not set. * bfd-in.h (bfd_seek): Change declaration to not mark fp const. * bfd-in2.h: Rebuild. * libbfd.c (bfd_seek): Don't mark parameters const, to avoid conflicts with declaration. Fri Sep 23 15:15:31 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * elfcode.h (map_program_segments): Don't abort if we allocated too much space for the program header, only if we allocated too little. (assign_file_positions_except_relocs): Similar change. Tue Sep 20 13:17:07 1994 J.T. Conklin (jtc@phishhead.cygnus.com) * libaout.h: Fix comment. * ns32knbsd.h: Changed M_NS32K_NETBSD to M_532_NETBSD to match libaout.h. Tue Sep 20 15:23:21 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * Makefile.in: Rebuilt dependencies. (BFD32_BACKENDS): Add sparcnetbsd.o. (CFILES): Add ns32knetbsd.c and sparcnetbsd.c. * targets.c: ns32knetbsd_vec was renamed to pc532netbsd_vec. * coff-sh.c (rtype2howto): Remove; unused. (coff_sh_relocate_section): Remove unused local variable rstat. (reloc_processing): Comment out; unused. Fri Sep 16 12:12:27 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * aoutx.h (aout_link_write_other_symbol): If h->indx is -2, then always write it out even if it would normally be stripped. (aout_link_input_section_std): If we find a reloc against a stripped global symbol, force it to be written out rather than merely calling unattached_reloc. (aout_link_input_section_ext): Likewise. (aout_link_reloc_link_order): Likewise. Wed Sep 14 15:37:19 1994 Jeff Law (law@snake.cs.utah.edu) * som.h (struct somdata): New field sorted_syms. (obj_som_sorted_syms): Accessor macro. * som.c (som_object_setup): Initialize sorted_syms to NULL. (som_prep_for_fixups): Sort a copy of the BFD's symbol table; store the sorted symbol table in sorted_syms. (som_write_fixups): Initalize tmp_reloc to NULL to make GCC happy. (som_begin_writing): Similarly for exec_header. Pass the sorted symbol table to som_write_symbol_strings. (som_build_and_write_symbol_table): Use the sorted symbols rather than the canonical symbol table. * som.h (som_symbol_type): Add "stringtab_offset" field. * som.c (som_write_symbol_strings): Use "stringtab_offset" rather than destroying the "name" field in the BFD symbol. (som_build_and_write_symbol_table): Likewise. Wed Sep 14 15:06:55 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * aoutx.h (aout_link_write_symbols): Rename skip_indirect to skip_next. If we find an N_WARNING symbol which has already been written out, set skip_next. * libecoff.h (struct ecoff_tdata): Add field find_buffer. * ecoff.c: Include aout/stab_gnu.h. (ecoff_find_nearest_line): Handle stabs debugging information. * elfcode.h (elf_link_output_extsym): Keep a symbol marked as weak even if it is referenced by another object. Tue Sep 13 17:57:00 1994 Jeff Law (law@snake.cs.utah.edu) * som.c (som_fixup_formats): Case R_ENTRY (0xb3), set both 'T' and 'U' to grab all the unwind information. (som_set_reloc_info): Make 'U' unwind bits persist across multiple SOM relocations. Set the addend field of an R_ENTRY relocation to the value in 'T'; set the addend field on an R_EXIT relocation to the value in 'U'. * som.h (som_symbol_type): Delete unwind field. * som.c (som_write_fixups): For R_ENTRY fixups, get 32bits of unwind information from the addend field of the R_ENTRY, get the other 32bits from the addend field of the R_EXIT. (bfd_som_attach_unwind_info): Delete function and all references. * som.h (som_symbol_type): Delete unused a.out-related fields. * som.c (bfd_section_from_som_symbol): Use bfd_abs_section_ptr instead of &bfd_abs_section. * som.c (som_object_setup): Handle exec_entry and exec_flags being switched in executables created by the OSF1 linker. (som_write_fixups): Handle R_EXIT just like the R_{F,L,R}SEL fixups. Support R_ALT_ENTRY (handle just like R_EXIT). Tue Sep 13 16:04:07 1994 Steve Chamberlain (sac@jonny.cygnus.com) * cofflink.c (coff_link_input_bfd): syment_base is unsigned so can't compare -ve numbers with it. Mon Sep 12 20:31:17 1994 Steve Chamberlain (sac@jonny.cygnus.com) * configure.in (shcoff_vec): Use cofflink.o now. * coff-sh.c: Rewritten to use new fast coff backend. Tue Sep 13 16:23:57 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * aoutx.h (NAME(aout,final_link)): Don't assume that all the input files are a.out. Tue Sep 13 11:09:39 1994 J.T. Conklin (jtc@rtl.cygnus.com) * configure.host (sparc-*-netbsd): use sparcnbsd. (ns32k-*-netbsd): use ns32knbsd. * hosts/{nbsd,i386nbsd,ns32knbsd,sparcnbsd}.h: New files, NetBSD host support. * sparcnetbsd.c: New file, adds support for NetBSD/sparc. * config/sparc-nbsd.mt: Likewise. * netbsd.h: New file, definitions common to all netbsd ports. * i386netbsd.c: Use it. * ns32knetbsd.c: Use it. * Makefile.in, configure.in, targets.c, config/i386-nbsd.mt, config/ns32k-nbsd.mt: canonicalize netbsd targets to conform to file/variable naming conventions. * i386netbsd.c: New file, renamed from netbsd386.c. * ns32knetbsd.c: New file, renamed from netbsd532.c. Mon Sep 12 21:56:20 1994 Jeff Law (law@snake.cs.utah.edu) * som.c (som_reloc_skip): Correct off-by-one error for 4-byte R_NO_RELOCATION fixups. (bfd_section_from_som_symbol): Return the absolute section if the symbol isn't contained in any section in the output file. (som_slurp_symbol_table): ST_PRI_PROG and ST_SEC_PROG symbols are not function symbols (they are magic code labels which *can* be the targets of cross space branches). $START$ is not a section symbol. Mon Sep 12 11:43:08 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * coff-alpha.c (ecoffalpha_little_vec): Add SEC_CODE and SEC_DATA to section_flags. * coff-mips.c (ecoff_little_vec, ecoff_big_vec): Likewise. * elfcode.h (swap_out_syms): Set the type of an undefined symbol to STT_FUNC if the BSF_FUNCTION flag is set. * cofflink.c (coff_link_input_bfd): If r_symndx is -1, don't change it. (_bfd_coff_generic_relocate_section): If r_symndx is -1, it is an absolute reloc. Don't dump core using r_symndx as an array index. * cf-m68klynx.c (coff_bfd_link_add_symbols): Define. (lynx_link_add_symbols): New static function (copy of function in coff-i386.c). (coff_m68k_lynxrtype_to_howto): sym argument may be NULL. * coff-i386.c (coff_i386_rtype_to_howto): Likewise. * coff-a29k.c (coff_a29k_relocate_section): Handle an r_symndx value of -1, meaning an absolute reloc. * ctor.c: Remove; obsolete. * Makefile.in: Rebuild dependencies. (BFD_LIBS): Remove ctor.o. (CFILES): Remove ctor.c. * libbfd.h: Rebuild. Mon Sep 12 01:58:47 1994 Jeff Law (law@snake.cs.utah.edu) * elf32-hppa.c (elf32_hppa_relocate_section): If there was a link error of some sort (for example, undefined symbols), then do not apply any relocs, just notify the user of the errors. (elf32_hppa_backend_begin_write_processing): Do not build a symbol extension section for an executable (it's useless). (elf32_hppa_link_output_symbol_hook): Do nothing if there was a link error of some sort (for example, undefined symbols). (elf32_hppa_read_symext_info): Kludge. Turn off SEC_HAS_CONTENTS for all the input symbol extension sections to keep the generic BFD code happy. Temporarily turn it on to read the contents of the symbol extension section. Sun Sep 11 21:58:59 1994 Jeff Law (law@snake.cs.utah.edu) * config/hppaosf.mh (RANLIB): Do not set. * config/hppabsd.mh (RANLIB): Likewise. Sun Sep 11 22:50:49 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * cf-i386lynx.c: Remove #if 0 code. (i386_lynxos_coff_object_p): Remove unused function. (coff_bfd_link_add_symbols): Define. (lynx_link_add_symbols): New static function. * coffcode.h (coff_bfd_link_hash_table_create): If coff_relocate_section is defined, only define this if not already defined. (coff_bfd_link_add_symbols, coff_bfd_final_link): Likewise. * linker.c (_bfd_generic_final_link): Handle bfd_indirect_link_order explicitly, rather than via _bfd_default_link_order. (set_symbol_from_hash): New static function, broken out of _bfd_generic_link_write_global_symbol. (_bfd_generic_link_write_global_symbol): Symbol setting code moved to set_symbol_from_hash; call it. (default_indirect_link_order): Add generic_linker argument. Change all callers. If false, set the generic symbols based on the hash table entries. Fri Sep 9 11:51:49 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * coffgen.c (coff_get_symtab): Reindented. Removed commented out call to bfd_constructor_entry. Convert m68k COFF to use new COFF backend linker. * coff-m68k.c (coff_relocate_section): Define. * cf-m68klynx.c (coff_rtype_to_howto): Define. (coff_m68k_lynx_rtype_to_howto): New static function. * configure.in (m68kcoff_vec): Build cofflink.o. (m68kcoffun_vec, m68klynx_coff_vec): Likewise. Thu Sep 8 16:20:38 1994 Steve Chamberlain (sac@jonny.cygnus.com) * coff-h8300.c (h8300_reloc16_extra_cases, case RELBYTE): Flag overflows correctly. Wed Sep 7 19:01:42 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * libelf.h (struct elf_backend_data): Change second argument of elf_backend_final_write_processing hook to boolean. (struct elf_obj_tdata): Add linker field. * elfcode.h (NAME(bfd_elf,write_object_contents)): Pass value of tdata linker field to final_write_processing, rather than NULL. (elf_bfd_final_link): Don't call final_write_processing hook. Set tdata linker field to true. * elf32-mips.c (mips_elf_final_write_processing): Change type of second argument to boolean. * elf32-hppa.c (elf32_hppa_backend_final_write_processing): Likewise. * coff-go32.c (RTYPE2HOWTO): Fully parenthesize arguments. * coff-i960.c (RTYPE2HOWTO): Likewise. * coff-m88k.c (RTYPE2HOWTO): Likewise. * coff-we32k.c (RTYPE2HOWTO): Likewise. Make i386 COFF use new COFF backend linker. * coff-i386.c (RTYPE2HOWTO): Fully parenthesize arguments. (coff_relocate_section): Define. (coff_i386_rtype_to_howto): New function. * configure.in (i386coff_vec): Use cofflink.o. (i386lynx_coff_vec): Likewise. * coffcode.h (bfd_coff_backend_data): Add new field _bfd_coff_rtype_to_howto. (bfd_coff_rtype_to_howto): Define. (coff_rtype_to_howto): Define to use RTYPE2HOWTO, if not already defined. (bfd_coff_std_swap_table): Initialize new field. * cofflink.c (_bfd_coff_final_link): Allocate section_count + 1 section_info structures, since the target_index is 1 based. (coff_link_input_bfd): Set *secpp to bfd_com_section_ptr for a common symbol. Adjust rel_hash by the output reloc count. (_bfd_coff_generic_relocate_section): New function. * libcoff-in.h (_bfd_coff_generic_relocate_section): Declare. * libcoff.h: Rebuild. * coff-alpha.c (alpha_ecoff_backend_data): Initialize new field. * coff-mips.c (mips_ecoff_backend_data): Likewise. Tue Sep 6 23:28:52 1994 Jeff Law (law@snake.cs.utah.edu) * som.c (som_bfd_derive_misc_symbol_info): Treat undefined code symbols and undefined symbols which no type in the same manner if the associated BFD symbol has BSF_FUNCTION set. For a defined symbol which no type, select a SOM type based on the flags of the section containing the symbol. (som_slurp_symbol_type): Set BSF_FUNCTION for undefined ST_STUB or ST_CODE symbols (importing a non-function code symbol is meaningless in SOM). (som_set_reloc_info): Don't set "offset" to the section's vma; it should always start at zero. Tue Sep 6 14:51:11 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) Add new style linker support to COFF backend. a29k only for now. * cofflink.c: New file. * libcoff-in.h: Include bfdlink.h. (obj_coff_external_syms, obj_coff_strings): Define accessor macro. (obj_coff_sym_hashes): Define accessor macro. (struct coff_tdata): Add fields external_syms, strings, and sym_hashes. (struct coff_link_hash_entry): Define. (struct coff_link_hash_table): Define. (coff_link_hash_lookup, coff_link_hash_traverse): Define. (coff_hash_table): Define. (_bfd_coff_link_hash_table_create): Declare. (_bfd_coff_link_add_symbols, _bfd_coff_final_link): Declare. * coffcode.h (bfd_coff_backend_data): Add fields _bfd_relsz, _bfd_coff_swap_reloc_in, _bfd_coff_sym_is_global, _bfd_coff_compute_section_file_positions, _bfd_coff_relocate_section. (bfd_coff_relsz, bfd_coff_swap_reloc_in): Define. (bfd_coff_sym_is_global): Define. (bfd_coff_compute_section_file_positions): Define. (bfd_coff_relocate_section): Define. (coff_mkobject_hook): Initialize obj_raw_syment_count and obj_conv_table_size. (coff_compute_section_file_positions): Set target_index of all sections. Set output_has_begun field. (coff_write_object_contents): Don't set target_index; now done by coff_compute_section_file_positions. Remove obsolete handling of scn_base and data_base. Don't bother to check that target_index is positive, since it always is. Remove use of pad, which is always zero. Check obj_raw_syment_count, not bfd_get_symcount, for the number of symbols, but only write them out if bfd_get_symcount is non-zero. Don't check obj_raw_syment_count until after coff_write_symbols is called. (coff_slurp_symbol_table): Use obj_raw_syment_count, not bfd_get_symcount for the number of symbols. Don't set obj_conv_table_size. (coff_sym_is_global): New static function or macro. (coff_slurp_reloc_table): Call coff_swap_reloc_in, not bfd_swap_reloc_in. (coff_bfd_link_hash_table_create): If coff_relocate_section is defined, define as _bfd_coff_link_hash_table_create. (coff_bfd_link_add_symbols): Similar change. (coff_bfd_final_link): Similar change. (coff_relocate_section): Define as NULL if not defined. (bfd_coff_std_swap_table): Initialize new fields. * coffgen.c (coff_real_object_p): Don't set obj_raw_syment_count and obj_conv_table_size here. (coff_count_linenumbers): Reindent. If bfd_get_symcount is zero, add up the line numbers from the sections. (coff_write_symbols): Set obj_raw_syment_count, not bfd_get_symcount. (coff_pointerize_aux): Don't pointerize a nonpositive x_endndx field. (coff_get_normalized_symtab): Use obj_raw_syment_count, not bfd_get_symcount. (coff_print_symbol): If auxp->fix_end, print x_endndx value. * coffswap.h (coff_swap_reloc_in): Rename from bfd_swap_reloc_in. Reindent. Change argument type to PTR. * coff-a29k.c (coff_a29k_relocate_section): New static function. (coff_relocate_section): Define. * configure.in (a29kcoff_big_vec): Compile cofflink.o. * coff-alpha.c (alpha_ecoff_backend_data): Initialize new fields. * coff-mips.c (mips_ecoff_backend_data): Likewise. * libcoff.h: Rebuilt. * Makefile.in: Rebuilt dependencies. (BFD32_BACKENDS): Add cofflink.o. (CFILES): Add cofflink.c. Tue Sep 6 14:00:45 1994 Ken Raeburn (raeburn@cujo.cygnus.com) * coffgen.c (coff_print_symbol, case bfd_symbol_print_all): Check for section symbol, and print its aux fields with appropriate labels. * Makefile.in (ALL_MACHINES): Added cpu-arm.o. Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org) * aoutx.h (NAME(aout,machine_type)): Recognize the ARM processor. * archures.c, config.bfd, configure.host, libaout.h, reloc.c, targets.c: Add support for the ARM. * cpu-arm.c, riscix.c, config/riscix.mh, config/riscix.mt: New files. * aoutx.h (add_to_stringtable): Check that str isn't a NULL pointer. Fri Sep 2 14:10:30 1994 Ken Raeburn (raeburn@cujo.cygnus.com) * reloc.c (enum bfd_reloc_code_real): Rewrote definition to use new "chew" commands for simultaneous definition of enumerator and enumerator name table. (bfd_get_reloc_code_name): New function, for retrieving a symbolic name associated with an enumerator. * libbfd.h, bfd-in2.h: Regenerated. Tue Aug 30 21:24:54 1994 Jeff Law (law@snake.cs.utah.edu) * som.c (som_write_fixups, case R_ENTRY): Handle case where no unwind descriptor information is available. Tue Aug 30 11:43:30 1994 Eric Youngdale (ericy@cais.cais.com) * elfcode.h (NAME(bfd_elf,size_dynamic_sections)): Add soname argument, and use it to set DT_SONAME dynamic entry. * bfd-in.h (bfd_elf32_size_dynamic_sections): Update prototype. (bfd_elf64_size_dynamic_sections): Update prototype. * bfd-in2.h: Rebuilt. Fri Aug 26 15:47:57 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * coffgen.c (coff_real_object_p): Set obj_raw_syment_count. (coff_get_normalized_symtab): Verify obj_raw_syment_count, rather than setting it. Thu Aug 25 10:44:53 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * archive.c (bsd_write_armap): Remove host dependencies. * aoutx.h (add_to_stringtab): Check for _bfd_stringtab_add error before adding BYTES_IN_WORD. * coffgen.c (coff_find_nearest_line): Look for the best C_FILE, not merely the first. * coffgen.c (coff_write_alien_symbol): If we are not using the symbol, clear the name so that it is not put in the string table. From Antti.Miettinen@ntc.nokia.com. Wed Aug 24 11:49:19 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * coffgen.c (coff_print_symbol): Cast pointer different to long and use %ld to print it. * osf-core.c (osf_core_core_file_p): Remove unused variable dseccnt. * ecoffswap.h (ecoff_swap_ext_out): If ECOFF_64, clear remaining bytes in bits2. * configure.host, config.bfd: Change i[34]86 to i[345]86. * coffgen.c (coff_real_object_p): Set obj_conv_table_size here, rather than waiting until coff_slurp_symbol_table. (coff_write_alien_symbol): Just ignore BSF_DEBUGGING symbols. From Antti.Miettinen@ntc.nokia.com. * section.c (bfd_make_section_anyway): Fix failure check of bfd_make_empty_symbol. From Antti.Miettinen@ntc.nokia.com. * aoutx.h (translate_to_native_sym_flags): Use the output_section (and output_offset) if there is one. * aoutx.h (aout_link_check_archive_element): Discard the symbols if the archive element was not needed. * aoutx.h (aout_get_external_symbols): Ensure that a zero string index yields an empty string. (aout_link_write_symbols): If info->keep_memory is false, use name from original hash table entry, not from entry in *sym_hash. * aoutx.h (struct aout_final_link_info): Add fields contents, relocs, symbol_map and output_syms. (NAME(aout,final_link)): Work out the largest section size, reloc size, and number of symbols. Use them to preallocate buffers that are large enough for all cases. (aout_link_input_bfd): Use preallocated symbol_map. (aout_link_write_symbols): Remove symbol_map argument; use preallocated symbol_map instead. Change all callers. Use preallocated output_syms. (aout_link_input_section): Remove symbol_map argument. Change all callers. Use preallocated contents and relocs. (aout_link_input_section_std): Remove symbol_map argument; use preallocated symbol_map instead. Change all callers. (aout_link_input_section_ext): Likewise. Tue Aug 23 10:51:09 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * archive.c (_bfd_write_archive_contents): Don't update the symbol map timestamp if there is no symbol map. From schwab@issan.informatik.uni-dortmund.de (Andreas Schwab). Mon Aug 22 12:26:42 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * targets.c (BFD_JUMP_TABLE_ARCHIVE): Add _update_armap_timestamp. (bfd_target): Add field _bfd_update_armap_timestamp. * bfd.c (bfd_update_armap_timestamp): Define. * bfd-in2.h: Rebuilt. * libbfd-in.h (_bfd_noarchive_update_armap_timestamp): Define. (_bfd_archive_bsd_update_armap_timestamp): Declare. (_bfd_archive_coff_update_armap_timestamp): Define. * libbfd.h: Rebuilt. * archive.c (_bfd_write_archive_contents): Call bfd_update_armap_timestamp instead of checking for a BSD archive and calling bsd_update_armap_timestamp. (_bfd_archive_bsd_update_armap_timestamp): Rename from _bsd_update_armap_timestamp. Don't assume that armap_datepos is already set. * aout-target.h (MY_update_armap_timestamp): Define if not already defined. * coff-rs6000.c (rs6000coff_update_armap_timestamp): Define. * ieee.c (ieee_update_armap_timestamp): Define. * libecoff.h (_bfd_ecoff_update_armap_timestamp): Define. * oasys.c (oasys_update_armap_timestamp): Define. * som.c (som_update_armap_timestamp): Define. * hash.c: Copy string hash functions from aoutx.h. * aoutx.h: String hash functions moved to hash.c. Retain simplified versions of add_to_stringtab and emit_stringtab. Change all callers to use new function and structure names. * libbfd-in.h (_bfd_stringtab_init, _bfd_stringtab_free): Declare. (_bfd_stringtab_size, _bfd_stringtab_add): Declare. (_bfd_stringtab_emit): Declare. * libbfd.h: Rebuilt. Mon Aug 22 10:49:37 1994 Eric Youngdale (ericy@cais.cais.com) * i386linux.c (linux_add_one_symbol): Create a fixup for any defined absolute symbol, not just GOT or PLT symbols. (linux_tally_symbols): Correct handling of references to defined symbols. Thu Aug 18 16:29:57 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) Get ld -x -r to handle a.out set symbols correctly. * aoutx.h (adjust_o_magic): If the .bss VMA was set outside of BFD, pad the .data section up to the VMA of the .bss section. (aout_link_add_symbols): If a set symbol does not get modified, treat it as a local symbol. (aout_link_write_symbols): Set the value of set symbols correctly. Don't discard set symbols even if discarding local symbols. (aout_link_write_other_symbol): Don't abort on bfd_link_hash_new, since it can now happen for set symbols. * elfcode.h (elf_fake_sections): Just check for ".rela" and ".rel", not ".rela." and ".rel."; make this work by checking use_rela_p. * elf32-i386.c (elf_i386_check_relocs): Just check for ".rel", not ".rel." (elf_i386_size_dynamic_sections): Likewise. (elf_i386_relocate_section): Likewise. * elf32-sparc.c (elf32_sparc_check_relocs): Just check for ".rela", not ".rela." (elf32_sparc_size_dynamic_sections): Likewise. (elf32_sparc_relocate_section): Likewise. Wed Aug 17 16:54:18 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * linker.c (_bfd_generic_link_add_archive_symbols): Initialize PASS to the old value + 1. * coffgen.c (coff_get_normalized_symtab): If a C_FILE symbol has no aux entries, use the symbol name as the file name. (coff_find_nearest_line): Look for the right C_FILE symbol, rather than always using the first one. If there is a debugging symbol after a function symbol, skip it. Add the section VMA to the line offset, since it was subtracted out in coff_slurp_line_table. Tue Aug 16 16:53:00 1994 Jeff Law (law@snake.cs.utah.edu) * som.c (som_prep_headers): If writing some form of an executable, allocate and attach an exec header to the BFD private data. (som_begin_writing): Don't fill fields of the exec header based on BFD private data here (like the exec flags). Do not write the exec header here. (som_write_headers): Instead do it here. * som.h (struct somdata): New field "exec_hdr" for the executable file header. (obj_som_exec_hdr): New accessor macro. Tue Aug 16 00:12:31 1994 Eric Youngdale (ericy@cais.cais.com) * i386linux.c (linux_link_create_dynamic_sections): Create section named .linux-dynamic, not .dynamic. (linux_add_one_symbol): Use .linux-dynamic, not .dynamic. (bfd_linux_size_dynamic_sections): Likewise. (linux_finish_dynamic_link): Likewise. Mon Aug 15 12:16:56 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * coffgen.c (STRING_SIZE_SIZE): Define. (coff_fix_symbol_name): Use STRING_SIZE_SIZE, not 4. (coff_write_symbols, build_string_table): Likewise. (coff_get_normalized_symtab): Likewise. * libcoff-in.h (obj_symbol_slew): Don't define. (struct coff_tdata): Remove unused fields index_slew, raw_linenos, and flags. * libcoff.h: Rebuilt. * coffcode.h (coff_mkobject): Don't initialize raw_linenos. (coff_mkobject_hook): Don't initialize flags. * aout-target.h (MY_zmagic_contiguous): Define as 0 if not already defined. (MY(backend_data)): Use MY_zmagic_contiguous, not hardcoded 0. * i386linux.c (MY_zmagic_contiguous): Define. * elfcode.h (bfd_section_from_shdr): If a SHT_SYMTAB section in a shared object has SHF_ALLOC set, create a BFD section for it. (elf_section_from_bfd_section): There may be a BFD section for a SHT_SYMTAB section. * coffcode.h (styp_to_sec_flags): Add name argument. If no flags are recognized, chose section flags based on the name. (bfd_coff_backend_data): _bfd_styp_to_sec_flags_hook field: Add name argument. (bfd_coff_styp_to_sec_flags_hook): Add name argument. (coff_compute_section_file_positions): Don't adjust the section position by COFF_PAGE_SIZE unless SEC_ALLOC is set. * libcoff.h: Rebuilt. * coffgen.c (make_a_section_from_file): Pass section name to bfd_coff_styp_to_sec_flags_hook. * ecoff.c (_bfd_ecoff_styp_to_sec_flags): Add unused name argument. * libecoff.h (_bfd_ecoff_styp_to_sec_flags): Add name argument to prototype. Fri Aug 12 11:22:40 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * elfcode.h (section_from_elf_index): Correct check for invalid section index. * elfcode.h (elf_link_add_object_symbols): If there is no symbol table, try using the dynamic symbol table. From Eric Youngdale . * configure.host (sparc-*-solaris2*): Use solaris2, not sysv4. The linker depends upon configuring for solaris2. * hosts/solaris2.h: New file; include hosts/sysv4.h. * config/solaris2.mh: New file; copy of config/sysv4.mh. Wed Aug 10 13:09:38 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * aoutx.h (adjust_z_magic): Make sure data section is padded to page boundary when the VMA is set by the calling program. From Eric Youngdale . Mon Aug 8 17:18:49 1994 Stan Shebs (shebs@andros.cygnus.com) Update to ns32k support, from Ian Dall (dall@hfrd.dsto.gov.au). * aout-ns32k.c: Add declarations that were in aout-ns32k.h, change declarations to traditional form. (MY_reloc_howto, MY_put_reloc): Change from macro to function. (ns32k_relocate_contents): New function. * aout-ns32k.h: Remove. * cpu-ns32k.c: Add declarations that were in aout-ns32k.h, change declarations to traditional form. (ns32k_final_link_relocate): Call ns32k_relocate_contents. * netbsd532.c: Reformat to standards, add copyright notice. (ARCH): Don't define. (aout-ns32k.h): Don't include. * pc532-mach.c: Ditto. Mon Aug 8 17:55:52 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * coff-i960.c (coff_i960_relocate): Don't try to convert relocs against common symbols. Sat Aug 6 22:27:30 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * irix-core.c (irix_core_core_file_p): Ignore sections that are not contained in the core file. Thu Aug 4 11:32:23 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * coff-m68k.c (m68k_reloc_type_lookup): New function. (coff_bfd_reloc_type_lookup): Define. * cf-m68klynx.c (_bfd_m68kcoff_reloc_type_lookup): Define. * elfcode.h (elf_bfd_final_link): Force the vma of sections which do not have SEC_ALLOC set to be 0. This is needed to handle relocs against debugging sections. Wed Aug 3 16:45:41 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * coff-i960.c (coff_i960_relocate): Rewrote to change relocs against locally defined symbols into relocs against section symbols, for VxWorks 5.1. Wed Aug 3 10:34:37 1994 Eric Youngdale (ericy@cais.cais.com) * i386linux.c (linux_add_one_symbol): Only handle SHARABLE_CONFLICTS specially if BSF_CONSTRUCTOR is set. Set hashp for a GOT or PLT symbol. Set jump field of fixup for a PLT symbol. (linux_tally_symbols): Check section of real symbol. When looking for a builtin fixup, check builtin and jump flags. Create no more than one fixup, and always create one if the real symbol is in the absolute section. Only strip absolute symbols. Wed Aug 3 05:08:24 1994 D. V. Henkel-Wallace (gumby@cygnus.com) * coffcode.h (coff_write_object_contents): set internal_a.magic to LYNXCOFFMAGIC whenever 68k, SPARC or i386 LynxOS (yes, they have the same magic number!) Tue Aug 2 10:43:21 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * hp300hpux.c (BMAGIC): Define as HPUX_DOT_O_MAGIC, to make test in aoutx.h work correctly. * coff-i960.c (coff_i960_relocate): New function. (howto_rellong, howto_iprmed): Use it as special_function. * libbfd-in.h: Move declarations of bfd_read, bfd_write, bfd_seek, bfd_tell, bfd_flush, and bfd_stat from here... * bfd-in.h: ...to here, to make them visible to programs which know more about the object file format than BFD does. * libbfd.h, bfd-in2.h: Rebuilt. Mon Aug 1 17:55:53 1994 Fred Fish (fnf@cygnus.com) * ptrace-core.c (ptrace_unix_core_file_p): Convert zalloc usage to bfd_zalloc. Mon Aug 1 12:04:40 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * elf64-sparc.c (ELF_MAXPAGESIZE): Define. ELF linker patches from Eric Youngdale . * elfcode.h (elf_link_create_dynamic_sections): Set type of _DYNAMIC to STT_OBJECT. (NAME(bfd_elf,record_link_assignment)): Always create hash table entry. Set type to STT_OBJECT. (elf_link_output_extsym): Don't set type of weak defined symbol to STB_WEAK if symbol was referenced. (map_program_segments): Check DYNAMIC as well as EXEC_P. (assign_file_positions_except_relocs): Likewise. * elf32-i386.c (elf_i386_create_dynamic_sections): Set type of _GLOBAL_OFFSET_TABLE to STT_OBJECT. (elf_i386_check_relocs): Ignore local PLT32 relocs. (elf_i386_relocate_section): Treat local PLT32 relocs as PC32. * elfcode.h (elf_adjust_dynamic_symbol): Correct weak symbol handling again. * elfcode.h (elf_slurp_reloc_table): Don't try to read the relocs if there aren't any. * configure.host (sparc-*-solaris2*): Use sysv4, not solaris2. * hosts/solaris2.h: Remove. * config/solaris2.mh: Remove. Sun Jul 31 14:27:04 1994 Jeff Law (law@snake.cs.utah.edu) * elf32-hppa.c, elf32-hppa.h: Update comment reflecting which HPPA ELF spec the code implements. Tue Jul 26 17:38:01 1994 Ken Raeburn (raeburn@cujo.cygnus.com) * cpu-i960.c (MAX_ARCH): New macro. (compatible): Use it in computing array bounds. Put comma after last entry in array, for regularity. (arch_info_struct): Adjust spacing for easier reading. * coff-i960.c (howto_rellong, howto_iprmed, howto_optcall): Use HOWTO macro. start-sanitize-i960xl * cpu-i960.c (XL): Define as bfd_mach_i960_xl. (scan_960_mach): Recognize xl machine. (MAX_ARCH): Define to be XL. (compatible): Add XL row to array. (arch_info_struct): Add XL entry. * archures.c (bfd_mach_i960_xl): New macro. * bfd-in2.h: Regenerated. * coffcode.h (coff_set_arch_mach_hook): For F_I960XL, set machine to bfd_mach_i960_xl. (coff_set_flags): For bfd_mach_i960_xl, set F_I960XL. end-sanitize-i960xl Tue Jul 26 11:04:00 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * elfcode.h (elf_adjust_dynamic_symbol): When handling a weak symbol, correct check to see whether the equivalent normal symbol was referenced. Add support for creating shared libraries under i386 ELF and SPARC ELF. Based on patches by Eric Youngdale . * libelf.h (struct elf_link_hash_entry): Remove copy_offset field. Add got_offset and plt_offset fields. (ELF_LINK_HASH_REF_DYNAMIC_MULTIPLE): Don't define. (ELF_LINK_HASH_DEF_DYNAMIC_MULTIPLE): Don't define. (ELF_LINK_HASH_NEEDS_COPY): Define. (struct elf_backend_data): Add check_relocs field. (struct bfd_elf_section_data): Change relocs from PTR to Elf_Internal_Rela *. (struct elf_obj_tdata): Add local_got_offsets field. (elf_local_got_offsets): Define accessor macro. (bfd_elf32_link_create_dynamic_sections): Declare. (bfd_elf32_link_record_dynamic_symbol): Declare. (bfd_elf64_link_create_dynamic_sections): Declare. (bfd_elf64_link_record_dynamic_symbol): Declare. * elfcode.h (elf_slurp_reloc_table): Don't use the section data relocs field. (elf_link_record_dynamic_symbol): Make globally visible. Use macro to rename to NAME(bfd_elf,link_record_dynamic_symbol). (elf_link_add_object_symbols): If creating a shared library, put make all local symbols dynamic. Don't bother with the DYNAMIC_MULTIPLE flags. Call the check_relocs backend function if it is defined. (elf_link_create_dynamic_sections): Make globally visible. Use macro to rename to NAME(bfd_elf,link_create_dynamic_sections). If creating a shared library, make sure that _DYNAMIC is added as a dynamic symbol. (elf_link_read_relocs): New function. (NAME(bfd_elf,record_link_assignment)): If creating a shared library, always create symbols, and always make them dynamic. (elf_bfd_final_link): Permit creation of shared libraries. (elf_link_input_bfd): Use elf_link_read_relocs to get the relocs. * elf.c (_bfd_elf_link_hash_newfunc): Don't initialize copy_offset. Initialize got_offset and plt_offset. * elf32-target.h (elf_backend_check_relocs): Define as 0 if not defined. (elf32_bed): Initialize check_relocs field. * elf64-target.h (elf_backend_check_relocs): Define as 0 if not defined. (elf64_bed): Initialize check_relocs field. * elf32-i386.c (elf_howto_table): Change R_386_PLT32 and R_386_GOTPC to be pc_relative and pcrel_offset. (elf_i386_pic_plt0_entry): Define. (elf_i386_pic_plt_entry): Define. (elf_i386_create_dynamic_sections): Create a .got.plt section, and define _GLOBAL_OFFSET_TABLE_ at the start of it. If creating a shared library, make sure that _GLOBAL_OFFSET_TABLE_ is added as a dynamic symbol. Don't create .rel.bss if creating a shared library. (elf_i386_check_relocs): New function. (elf_i386_adjust_dynamic_symbol): Don't make a PLT entry if the symbol already has one. When making a PLT entry, set plt_offset. Don't create a copy reloc when creating a shared library. Don't set copy_offset, just set ELF_LINK_HASH_NEEDS_COPY. (elf_i386_allocate_dynamic_section): Remove. (elf_i386_size_dynamic_sections): Look through all the sections rather than assuming we know their names. Remove any empty reloc or plt sections. Only add a DT_DEBUG entry if not creating a shared library. Only add a DT_PLTGOT entry if there is a PLT. Add a DT_TEXTREL entry if required. (elf_i386_relocate_section): Permit undefined symbols when creating a shared library. Handle the special relocation types specially. (elf_i386_finish_dynamic_symbol): Create a PLT entry if plt_offset is set. If creating a shared library, produce a PIC PLT entry. Only mark a PLT symbol as undefined if it was not defined by a regular object file. Create a GOT entry if got_offset is set. Create a copy reloc if ELF_LINK_HASH_NEEDS_COPY is set. (elf_i386_finish_dynamic_sections): Change the handling of DT_RELSZ to simply subtract out the size of .rel.plt. If creating a shared library, produce PIC PLT code. (elf_backend_check_relocs): Define. * elf32-sparc.c (elf_sparc_howto_table): Change R_SPARC_GOT10, R_SPARC_GOT22, and R_SPARC_PC10 to not warn about reloc overflow. (elf32_sparc_create_dynamic_sections): If creating a shared library, make sure that _GLOBAL_OFFSET_TABLE_ is added as a dynamic symbol, and set the type to STT_OBJECT. Likewise for _PROCEDURE_LINKAGE_TABLE_. Don't create .rel.bss if creating a shared library. (elf32_sparc_check_relocs): New function. (elf32_sparc_adjust_dynamic_symbol): Don't make a PLT entry if the symbol already has one. When making a PLT entry, set plt_offset. Don't create a copy reloc when creating a shared library. Don't set copy_offset, just set ELF_LINK_HASH_NEEDS_COPY. (elf32_sparc_allocate_dynamic_section): Remove. (elf32_sparc_size_dynamic_sections): Look through all the sections rather than assuming we know their names. Only add a DT_DEBUG entry if not creating a shared library. Add a DT_TEXTREL entry if required. (elf32_sparc_relocate_section): Permit undefined symbols when creating a shared library. Handle the special relocation types specially. (elf32_sparc_finish_dynamic_symbol): Create a PLT entry if plt_offset is set. Only mark a PLT symbol as undefined if it was not defined by a regular object file. Create a GOT entry if got_offset is set. Create a copy reloc if ELF_LINK_HASH_NEEDS_COPY is set. (elf32_sparc_finish_dynamic_sections): Store dynobj in a local variable. (elf_backend_check_relocs): Define. Mon Jul 25 12:21:07 1994 Stan Shebs (shebs@andros.cygnus.com) * configure.in (pc532mach_vec): Change to pc532machaout_vec. * config.bfd (ns32k-*-netbsd*): Use ns32k-nbsd as bfd_name. * Makefile.in (ALL_MACHINES): Add cpu-ns32k.o. (BFD32_BACKENDS): Add aout-ns32k.o, netbsd532.o, m88kmach3.o, pc532-mach.o. * targets.c (pc532machaout_vec): Use instead of pc532mach_vec. * config/pc532-mach.mt (DEFAULT_VECTOR): Ditto. (SELECT_VECS): Remove. * config/ns32k-nbsd.mt: New file, was ns32k-netbsd.mt. * config/ns32k-netbsd.mt: Remove, name too long. Fri Jul 22 11:07:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * linker.c (generic_link_check_archive_element): When changing a symbol to common, set the alignment. (_bfd_generic_link_add_one_symbol): When creating a common symbol, set the alignment. * aoutx.h (aout_link_check_ar_symbols): When changing a symbol to common, set the alignment. (aout_link_add_symbols): Restrict the alignment of a common symbol to the alignment power given by the architecture. * libelf.h (struct elf_link_hash_entry): Remove align field. Add copy_offset field. * elfcode.h (elf_link_add_object_symbols): Store alignment in new bfd_link_hash_entry field, not in elf_link_hash_entry field. (elf_link_output_extsym): Similar change when getting alignment. * elf.c (_bfd_elf_link_hash_newfunc): Don't initialize align. Do initialize copy_offset. * elf32-i386.c (elf_i386_adjust_dynamic_symbol): Use copy_offset field rather than align field. Get alignment using bfd_log2 rather than switch. * elf32-sparc.c (elf32_sparc_adjust_dynamic_symbol): Likewise. * elf32-i386.c (elf_i386_finish_dynamic_symbol): Use copy_offset, not align. * elf32-sparc.c (elf32_sparc_finish_dynamic_symbol): Likewise. * aoutx.h (NAME(aout,some_aout_object_p)): Just check STAT_FOR_EXEC, don't check MACH. * m88kmach3.c (MACH): Don't define. * config/i386-mach3.mt (TDEFINES): Define STAT_FOR_EXEC. * config/m88k-mach3.mt (TDEFINES): Likewise. * config/mips-mach3.mt (TDEFINES): Likewise. Thu Jul 21 17:24:31 1994 Stan Shebs (shebs@andros.cygnus.com) * i386mach3.c: Reverted to version from before Jul 5 1994 changes. Thu Jul 21 12:26:01 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * reloc.c (struct reloc_howto_struct): Remove special_function1. It's the wrong way to do things. (HOWTO): Change accordingly. (HOWTO2): Remove. (_bfd_final_link_relocate): Remove references to special_function1. * bfd-in2.h: Rebuilt. * aoutx.h (aout_link_input_section_std): Remove references to special_function1. (aout_link_reloc_link_order): Likewise. Wed Jul 20 15:46:44 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * elfcode.h (NAME(bfd_elf,size_dynamic_sections)): Add rpath argument. If it is not NULL, use it to set DT_RPATH. * bfd-in.h (bfd_elf32_size_dynamic_sections): Update prototype. (bfd_elf64_size_dynamic_sections): Likewise. * bfd-in2.h: Rebuilt. Sat Jul 16 21:10:39 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * elfcode.h (elf_get_dynamic_symtab_upper_bound): If there is no dynamic symtab, return error. * libelf.h (ELF_LINK_HASH_DEFINED_WEAK): Define. * elfcode.h (elf_link_add_object_symbols): If symbol is defined as weak, set ELF_LINK_HASH_DEFINED_WEAK. (elf_link_output_extsym): If symbol is defined as weak, mark it STB_WEAK. * libelf.h (struct bfd_elf_section_data): Add relocs field. (shdr_name): Remove; unused. * elfcode.h (elf_slurp_reloc_table): Rewrote to handle both REL and RELA relocs. Free up the unswapped relocs. Permit the relocs to be cached in the section_data. Correct the reloc address. (elf_slurp_reloca_table): Remove. (elf_canonicalize_reloc): Rewrote. (elf_link_input_bfd): Permit the relocs to be cached in the section data. Sat Jul 16 13:55:38 1994 Stan Shebs (shebs@andros.cygnus.com) * config.bfd (m88*-harris-cxux*): Recognize. * hosts/harris.h (POSIX_UTIME, HAVE_PROCFS): Define. * configure.host (m68*-atari-sysv4*): New host. (m68*-cbm-sysv4*): Use m68kv4 instead of amix. * hosts/amix.h: Remove. * hosts/m68kv4.h: New file, was amix.h. Thu Jul 14 15:12:24 1994 Ken Raeburn (raeburn@cujo.cygnus.com) * reloc.c (enum bfd_reloc_code_real, bfd_type, struct reloc_howto_struct, reloc_howto_type, HOWTO, HOWTO2): Copied changes over from bfd-in2.h so they get generated properly next time someone runs "make headers". * bfd-in2.h: Rebuilt. * targets.c (netbsd532_vec, pc532mach_vec): Declare const. (m88kmach3_vec): Restore deleted declaration. * configure.in: Alphabetize target vector names. * config/pc532mach.mh: New file. (HDEPFILES, HDEFINES): Define here. * config/pc532-mach.mt (HDEPFILES, HDEFINES): Deleted. * config/ns32k-netbsd.mt (HDEPFILES, HDEFINES): Deleted. Sun Jul 10 00:04:20 1994 Ian Dall (dall@hfrd.dsto.gov.au) * pc532-mach.c: New File. pc532-mach a.out format. * netbsd532.c: New file. pc532-netbsd532 a.out format. * hosts/pc532mach.h: New file. pc532-mach host support. * cpu-ns32k.c: New file. ns32k support cpu specific code rather than format specific code. * config/pc532-mach.mt: New file. Support for pc532-mach target. * config/ns32k-netbsd.mt: New file. Support for netbsd532 target. * aout-ns32k.c, aout-ns32k.h: New files supporting aout format for ns32k series. * targets.c: Add netbsd532_vec and pc532machaout_vec into bfd_target_vector array. Move netbsd386_vec to alphabetic order location. * reloc.c (_bfd_final_link_relocate) Add support for special_function1 in howto. * libaout.h: add M_NS32032, M_NS32532, M_532_NETBSD entries in machine_type enum. * configure.in: add pc532mach_vec and netbsd532_vec entries. * config.bfd: add pc532mach host entries. Use for both ns32k-pc532-mach and ns32k-pc532-netbsd. * config.bfd: it doesn't work to use i386-mach3 for ns32k*-*-mach. add ns32k-pc532-mach* and ns32k-*-netbsd* entries. * bfd-in2.h: Add ns32k specific relocations to bfd_reloc_code_real enum. * bfd-in2.h: Add special_function1 to struct howto. Change HOWTO and NEWHOWTO macros to make special_function1 NULL. Neww HOWTO2 macro. * bfd-in2.h: Split definition of struct reloc_howto_struct and corresponding typedef into two statements. * bfd-in2.h: Add entry bfd_arch_ns32k to bfd_architecture enum. * archures.c: Add bfd_ns32k_arch prototype, and entry in archures_init_table. * aoutx.h (aout_link_reloc_link_order): Allow for target dependent MY_put_reloc macro. Allow for target dependent special_function1 to apply the relocation. * aoutx.h (aout_link_input_section_std): Allow for target dependent determination of reloc howto. Allow for target dependent special_function1 to apply the relocation. * aoutx.h (get_reloc_upper_bound): Detect bss and return 0. * aoutx.h (slurp_reloc_table): Detect bss and succesfully read zero reloc entries. * aoutx.h (machine_type): Add bfd_arch_ns32k case. * aoutx.h: Stat to determine executable status if STAT_FOR_EXEC is defined (not just MACH). Use fstat instead of stat and check for fstat error. * aoutx.h: Allow target dependent swap_std_reloc_{in,out}. * aoutx.h: Allow CTORS reloc info to be in target dependent reloc table. * aout-target.h: Apply SWAP_MAGIC (if defined) after swap_exec_header_in, otherwise we have magic in the wrong order. Thu Jul 14 11:47:27 1994 Stan Shebs (shebs@andros.cygnus.com) * coff-sparc.c (sparccoff_vec): Have leading underscores. Tue Jul 12 12:08:10 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * aix386-core.c, aoutf1.h, cisco-core.c, elfcode.h, hppabsd-core.c, hpux-core.c, irix-core.c, lynx-core.c, osf-core.c, ptrace-core.c, rs6000-core.c, trad-core.c: Remove SEC_ALLOC flag from .reg sections, .reg sections are not allocated and contain debug information only. * osf-core.c (make_bfd_asection, osf_core_core_file_p): Use bfd_make_section_anyway instead of building unique section names. Tue Jul 12 11:41:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * libelf.h (bfd_elf32_swap_symbol_in): Declare. (bfd_elf32_swap_symbol_out): Declare. (bfd_elf64_swap_symbol_in, bfd_elf64_swap_symbol_out): Declare. * elf32-hppa.c (elf32_hppa_args_hash_table_init): Correct cast. * aout-encap.c (ARCH): Don't define. Obsolete. * aout0.c, aoutx.h, gen-aout.c, hp300bsd.c, hp300hpux.c: Likewise. * i386aout.c, i386bsd.c, i386dynix.c, i386linux.c: Likewise. * i386lynx.c, m68klynx.c, mipsbsd.c, netbsd386.c: Likewise. * newsos3.c, sparclynx.c, sunos.c: Likewise. Mon Jul 11 20:08:23 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * section.c (STD_SECTION): Make the sixth argument boolean, not the seventh. From gary@tuva.pacsemi.oz.au (gary kopff). Sun Jul 10 09:12:02 1994 D. V. Henkel-Wallace (gumby@cygnus.com) * aoutx.h (bfd_free_cached_info): Change name of FREE to BFCI_FREE in order not to collide with LynxOS's definition of FREE in /usr/include/sys/proc.h Thu Jul 7 14:18:06 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * reloc.c (bfd_perform_relocation): Don't clobber the relocation value for coff-Intel-little or coff-Intel-big. Hack upon hack. Thu Jul 7 10:10:34 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * aoutx.h (howto_table_std): Add entry for GOT relocations which are present in sun3 shared libraries, to avoid assertions when reading the dynamic relocations. Thu Jul 7 10:19:20 1994 Jeff Law (law@snake.cs.utah.edu) * som.h (R_HPPA_COMPLEX): Fix dumb typo. Wed Jul 6 19:21:57 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * hosts/sysv4.h (qsort, strtol): Don't declare. * elfcode.h (elf_link_output_sym): Don't call output_symbol_hook if it is NULL. * elf32-mips.c (mips_elf_final_write_processing): Add ignored info argument to correspond to recent libelf.h change. Wed Jul 6 00:48:57 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * coff-alpha.c (alpha_ecoff_mkobject_hook): New hook to additionally copy object type information from the alpha file header to the BFD flags. (alpha_ecoff_backend_data): Use it. (ecoffalpha_little_vec): Add DYNAMIC to object_flags. * aout64.c: Fix typo in conditional QMAGIC definition. Wed Jul 6 00:13:17 1994 Jeff Law (law@snake.cs.utah.edu) * hppabsd-core.c (hppabsd_core_core_file_p): Sanity check the value of clicksz to help weed out non HPPA BSD core files. Tue Jul 5 13:26:02 1994 Stan Shebs (shebs@andros.cygnus.com) Mach 3 support. * config.bfd (m88*-*-mach3*, mips*-dec-mach3*, mips*-*-mach3*): New targets. * configure.host (i[34]86-*-mach3*, ns32k-*-mach3*): Recognize "mach3" instead of "mach". (m88*-*-mach3*, mips*-dec-mach3*, mips*-*-mach3*): New hosts. * targets.c (m88kmach3_vec): New target vector. (bfd_target_vector): Add i386mach3_vec and m88kmach3_vec, but inside #if 0. * aoutx.h (some_aout_object_p) [MACH]: Recognize executables by checking for execute permission, instead of looking at entry point. * i386mach3.c: Update, define MACH, N_TXTOFF, N_TXTADDR, N_SHARED_LIB, don't include aout/*.h files, etc. * m88kmach3.c: New file, m88k Mach 3 target. * config/m88k-mach3.mt, config/mips-mach3.mt: New files, target makefile fragments. * config/i386mach3.mh, config/m88kmach3.mh, config/mipsmach3.mh: New files, host makefile fragments. * hosts/m88kmach3.h, hosts/mipsmach3.h: New files, host definitions. Tue Jul 5 13:56:52 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * elfcode.h (swap_out_syms): Get alignment of common symbol from st_value field of saved ELF symbol information, if there is any. Mon Jul 4 19:13:32 1994 Jeff Law (law@snake.cs.utah.edu) * som.h (R_HPPA_COMPLEX): Define. * elf32-hppa.h (R_HPPA_COMPLEX): Define. (elf32_hppa_reloc_type): Delete R_PARISC_STUB_CALL_17. Fri Jul 1 12:07:41 1994 Jeff Law (law@snake.cs.utah.edu) * Support code for enabling the new style linker for PA ELF. * elfcode.h (swap_symbol_in, swap_symbol_out): Externalize. (elf_compute_section_file_positions): Pass link_info to the begin_write_processing hook. (bfd_elf_write_object_contents): Pass NULL for new link_info argument to final_write_processing hook. (elf_link_output_sym): Accept new "input_section" argument for the symbols's input section. All callers changed. Call the link_output_symbol_hook if it's defined. (elf_bfd_final_link): Call the final_write_processing hook if it's defined. * libelf.h (elf_backend_link_output_symbol_hook): Declare. (elf_backend_begin_write_processing): Add new "info" argument. (elf_backend_final_write_processing): Likewise. * elf32-target.h (elf_backend_link_output_symbol_hook): Provide a default definition. (elf32_bed): Add elf_backend_link_output_symbol_hook. * elf64-target.h: Likewise. * Major rework of the PA ELF code. Uses the new style BFD linker, major cleanups. * hppa_stubs.h: Rewrite from scratch. Much smaller and simpler. * elf32-hppa.h: Delete all symbol extension related code. (hppa_look_for_stubs_in_section): Delete decl. (elf32_hppa_size_stubs, elf32_hppa_build_stubs): New decls. * elf32-hppa.c: Symbol extension stuff moved form elf32-hppa.h into elf32-hppa.c. Do not include aout64.h. (typdef hppa_stub_type): Delete. (elf32_hppa_stub_name_list_struct): Delete. (elf32_hppa_stub_description_struct): Delete. (arg_reloc_type): Use simpler enumerations. All references changed. (arg_location, arg_reloc_relocation): Likewise. (elf32_hppa_symextn_map_struct): Delete. (get_symbol_value): Delete. (elf32_hppa_get_sym_extn): Delete. (find_stubs, new_stubs, type_of_mismatch): Delete. (find_stub_by_name, add_stub_by_name): Delete. (hppa_elf_stub_finish, hppa_elf_stub_reloc): Delete. (hppa_elf_arg_reloc_needed): Renamed. Simplify. (hppa_elf_build_linker_stub, hppa_elf_create_stub_sec): Delete. (hppa_elf_long_branch_needed_p): Delete. (hppa_look_for_stubs_in_section): Delete. (hppa_elf_get_section_contents): Delete. (elf32_hppa_backend_symbol_processing): Delete. (elf32_hppa_backend_section_processing): Delete. (elf32_hppa_backend_section_from_shdr): Delete. (elf32_hppa_backend_fake_sections): Delete. (elf32_hppa_backend_section_from_bfd_section): Delete. (NEW_INSTRUCTION): Delete. (CURRENT_STUB_OFFSET): Delete. (elf32_hppa_relocate_section): New function. (elf32_hppa_bfd_final_link_relocate): New function. (elf32_hppa_size_symext): New function. (elf32_hppa_link_output_symbol_hook): New function. (elf32_hppa_read_symext_info): New function. (elf32_hppa_add_symbol_hook): New function. (elf32_hppa_name_of_stub): New function. (elf32_hppa_size_of_stub): New function. (elf32_hppa_build_one_sub): New function. (elf32_hppa_build_stubs): New function. (elf32_hppa_size_stubs): New function. (linker, stub and argument hash tables): Add appropriate structures, definitions and functions to implement all three hash tables. (hppa_elf_relocate_insn): Don't need argument location information in this function. (add_entry_to_symext_chain): Accept a symbol's argument location information rather than the symbol itself. All callers changed. (hppa_elf_gen_reloc_type): Simplify. (hppa_elf_set_section_contents): Stub section is no longer special. (hppa_elf_reloc): Greatly simplify. (elf32_hppa_begin_write_processing): Accept link_info argument. Handle being called from the BFD backend linker. (elf32_hppa_final_write_processing): Likewise. (elf_hppa_tc_make_sections): No longer call stub_finish. Mon Jun 27 18:07:06 1994 Steve Chamberlain (sac@cirdan.cygnus.com) * section.c (bfd_get_section_contents): Put in parens to get precedence right. Sun Jun 26 18:08:29 1994 Jeff Law (law@snake.cs.utah.edu) * libelf.h (relocate_section): New argument "output_names" added to prototype. * elfcode.h (elf_link_input_bfd): New argument "output_names" added to prototype of relocate_section. Pass the output symbol names to relocate_section. * elf32-i386.c (elf_i386_relocate_section): Use "output_names" to determine the name of a local symbol. * elf32-mips.c (mips_elf_relocate_section): Likewise. * elf32-sparc.c (elf32_sparc_relocate_section): Likewise. Fri Jun 24 08:15:42 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) Add Solaris BCP (the part of Solaris which allows it to run SunOS4 a.out files) core file handling. * aoutf1.h (external_solaris_bcp_core, swapcore_solaris_bcp): New structure and its swap in function. (internal_sunos_core): New member c_data_addr, to receive the start address of the data section in the core file. (swapcore_sun3, swapcore_sparc, sunos4_core_file_p): Use it. (sunos4_core_file_p): Recognize Solaris BCP core file. (sunos4_core_file_matches_executable_p): Always indicate match for Solaris BCP core files. Thu Jun 23 15:31:28 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) Preliminary support for generating shared libraries, from Eric Youngdale . * elfcode.h (prep_headers): If DYNAMIC, set e_type to ET_DYN. (elf_link_add_object_symbols): If generating a shared library, create dynamic sections for first input BFD with the right format. (elf_link_create_dynamic_sections): Don't create .interp section if creating a shared library. (elf_link_input_bfd): Skip dynamic sections in input file. (elf_bfd_final_link): If creating a shared library, it's OK for dynobj to have sections which are not SEC_IN_MEMORY. * elf32-i386.c (elf_i386_size_dynamic_sections): Only set .interp section if not creating a shared library. * elf32-sparc.c (elf_sparc_size_dynamic_sections): Likewise. * elfcode.h (elf_object_p): Don't set DYNAMIC just because there is an SHT_DYNAMIC section. * cf-i386lynx.c (i386coff_vec): Don't include DYNAMIC in object_flags. * coff-sparc.c (sparccoff_vec): Likewise. * hppabsd-core.c (hppabsd_core_vec): Likewise. * aoutx.h (NAME(aout,some_aout_object_p)): Don't set SEC_RELOC just because DYNAMIC is set. Thu Jun 23 12:53:41 1994 David J. Mackenzie (djm@rtl.cygnus.com) * configure.in: Change --with-targets to --enable-targets and --with-64-bit-bfd to --enable-64-bit-bfd. * Makefile.in, mpw-make.in, targets.c: Change comments. Wed Jun 22 17:59:59 1994 Ken Raeburn (raeburn@cujo.cygnus.com) * config.bfd (powerpc-*-elf*): New target, just like powerpc-*-sysv4*. * linker.c (FAIL): Undefine macro before defining as enum. Wed Jun 22 10:52:47 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * linker.c (_bfd_generic_link_add_archive_symbols): Initialize pass from abfd->archive_pass, and save it there as well. * hash.c (bfd_hash_allocate): Don't call bfd_set_error if obstack_alloc returns NULL unless the size is non-zero. * linker.c (archive_hash_allocate): Define. (_bfd_generic_link_add_archive_symbols): Use archive_hash_allocate rather than obstack_alloc, for clarity. * elfcode.h (elf_get_reloc_upper_bound): Correct. * aout64.c (BMAGIC, QMAGIC): Define if not already defined. From Peter Schauer . Linux ZMAGIC support from Eric Youngdale . * libaout.h (struct aoutdata): Add field zmagic_disk_block_size. * aout-target.h (MY(callback)): Only set alignment according to architecture if the section sizes are aligned to that alignment, for backward compatibility. (MY(set_sizes)): Initialize zmagic_disk_block_size field. * aoutx.h (adjust_z_magic): Set ztih if using q_magic_format. Set text section filepos to zmagic_disk_block_size if not ztih. Use a different padding algorithm if not ztih. * i386linux.c (MY_text_includes_header): Don't define. * aoutx.h (aout_link_check_ar_symbols): Just skip N_STAB and N_FN symbols; don't look them up in the hash table. From ralphc@pyramid.com (Ralph Campbell). Tue Jun 21 11:47:20 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * coff-go32.c (go32coff_archive_p): Remove unused function. * section.c (bfd_abs_section): Make const. (bfd_abs_section_ptr, bfd_is_abs_section): Define. (bfd_und_section): Make const. (bfd_und_section_ptr, bfd_is_und_section): Define. (bfd_com_section): Make const. (bfd_com_section_ptr): Define. (bfd_ind_section): Make const. (bfd_ind_section_ptr, bfd_is_ind_section): Define. (bfd_abs_symbol, bfd_com_symbol): Make const. (bfd_und_symbol, bfd_ind_symbol): Likewise. (global_syms): Cast initialization of section field. (STD_SECTION): Define as const, and cast initializations. * bfd-in2.h: Rebuilt. * Many files: Change uses of bfd_abs_section, etc., to use bfd_abs_section_ptr or bfd_is_abs_section, etc. Mon Jun 20 11:06:27 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) * Many files: change all bfd_target vectors to be const. Change all uses of bfd_target * to be const bfd_target *. Change bfd_target_vector and bfd_default_vector arrays to be const bfd_target * const *. * ecoff.c, libecoff.h, ecoffswap.h, coff-alpha.c, coff-mips.c, elf32-mips.c: Renamed all externally visible ECOFF routines which are local to BFD to start with _bfd_ecoff instead of just ecoff. * ecoff.c (ecoff_swap_tir_in): Change input argument to const. (ecoff_swap_tir_out): Likewise. (ecoff_swap_rndx_in, ecoff_swap_rndx_out): Likewise. (ecoff_slurp_symbolic_info): Add new arguments to correspond to read_debug_info entry point in ecoff_debug_swap structure. Change all calls. * libecoff.h (ecoff_slurp_symbolic_info): Change declaration. * ecoffswap.h (ecoff_swap_tir_in, ecoff_swap_tir_out): Declare. (ecoff_swap_rndx_in, ecoff_swap_rndx_out): Declare. * coff-alpha.c (alpha_ecoff_backend_data): Initialize new ecoff_debug_swap fields. * coff-mips.c (mips_ecoff_backend_data): Likewise. * elf32-mips.c (mips_elf_read_ecoff_info): Undefine READ. (mips_elf_ecoff_debug_swap): Initialize new ecoff_debug_swap fields. * configure.in (bfd_elf32_bigmips_vec): Use ecoff.o and ecofflink.o. (bfd_elf32_littlemips_vec): Likewise. (ecoff_big_vec, ecoff_little_vec): Likewise. (ecoffalpha_little_vec): Likewise. * Makefile.in (BFD_LIBS): Remove ecoff.o and ecofflink.o. (BFD32_BACKENDS): Add ecoff.o and ecofflink.o. * aoutx.h (NAME(aout,final_link)): Check flavour of sub, not abfd, when computing reloc sizes. From Eric Youngdale . * elfcode.h (elf_bfd_final_link): Don't try to compute maximum reloc count or size for a non-ELF file. * mipsbsd.c (MY_final_link_callback): Define to avoid warning. * hp300hpux.c (MY_final_link_callback): Define to avoid warning. (BMAGIC, QMAGIC): Define; used by aoutx.h. (MY(slurp_symbol_table)): Change translate_from_native_sym_flags calls to use new parameters. Fri Jun 17 14:45:32 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * aout-target.h (MY(callback)): Set the alignments of the text, data and bss sections after determining the architecture. * sunos.c (sunos_add_one_symbol): Treat a common symbol from a dynamic object as being in the .bss section of the object, rather than as being undefined. Fri Jun 17 11:16:50 1994 Jeff Law (law@snake.cs.utah.edu) * libhppa.h (bfd_hppa_insn2fmt, hppa_rebuild_insn): Make INLINE. * elf32-hppa.h (elf_hppa_final_processing): Delete decl. Thu Jun 16 23:36:23 1994 Jeff Law (law@snake.cs.utah.edu) * elfcode.h (elf_link_input_bfd): Don't try to read local symbols if there aren't any in the input file. Thu Jun 16 14:25:22 1994 Eric Youngdale (ericy@cais.cais.com) * i386linux.c: Many new functions and definitions for linker support for Linux shared libraries. * bfd-in.h (bfd_linux_size_dynamic_sections): Declare. * bfd-in2.h: Rebuild. Thu Jun 16 14:23:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * config.bfd: If second argument is ``_'', then, instead of echoing config file name, echo whether target uses leading underscores on symbol names. Add appropriate settings to different cases. Used by binutils/configure.in to set default for c++filt. * elfcode.h (elf_bfd_final_link): If trying to generate a shared object, warn and return false. * aoutx.h (NAME(aout,some_aout_object_p)): Accept BMAGIC objects and treat them as OMAGIC. Wed Jun 15 18:02:21 1994 Ken Raeburn (raeburn@cujo.cygnus.com) Enable sparc v9 support for release. Note that this is still a work in progress, pending release of an ABI specification. * config.bfd, configure.in: Include sparc v9 elf config. * elfcode.h (prep_headers): Handle sparc v9 (64 bit). * reloc.c (bfd_reloc_code_real): New reloc types. * elf64-sparc.c: Implement elf64-sparc target. * Makefile.in, targets.c: Updated. Wed Jun 15 01:34:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * libelf.h (struct elf_obj_tdata): New field dt_needed_name. (elf_dt_needed_name): New accessor macro. * elfcode.h (elf_link_add_object_symbols): If elf_dt_needed_name is set, use that instead of the filename for the DT_NEEDED dynamic entry. * elf.c (bfd_elf_set_dt_needed_name): New function. * bfd-in.h (bfd_elf_set_dt_needed_name): Declare. * bfd-in2.h: Rebuilt. * elfcode.h (NAME(bfd_elf,size_dynamic_sections)): Add sinterpptr argument, and set it to the .interp section. * bfd-in.h (bfd_elf32_size_dynamic_sections): Update prototype. (bfd_elf64_size_dynamic_sections): Likewise. * bfd-in2.h: Rebuilt. * coff-sparc.c (SWAP_OUT_RELOC_EXTRA): Define to clear the r_spare field of the reloc rather than letting it be garbage. * archive.c (bfd_slurp_armap): Recognize __.SYMDEF/ as well as __.SYMDEF; the former was used in old Linux archives. From jrs@world.std.com (Rick Sladkey). * i386linux.c (i386linux_write_object_contents): Define; like MY(write_object_contents) in aout-target.h, but set MACHTYPE to M_386. From jrs@world.std.com (Rick Sladkey). (MY_write_object_contents): Define. * aoutx.h (translate_from_native_sym_flags): Treat N_SETV symbols as N_DATA symbols. (aout_link_add_symbols): Likewise. * aoutx.h: Rewrite symbol duplicate elimination to use BFD hash tables. (struct stringtab_entry, struct stringtab_data): Remove. (HASHMAXLEN, HASH_CHAR, hash, compare, log2, emit_strtab): Remove. (struct strtab_hash_entry, struct strtab_hash): Define. (strtab_hash_newfunc, strtab_hash_lookup): Define. (stringtab_free, emit_stringtab): Define. (stringtab_init, add_to_stringtab): Rewrite. (NAME(aout,write_syms)): Use new stringtab code. (struct aout_final_link_info, NAME(aout,final_link)): Likewise. (aout_link_write_symbols, aout_link_write_other_symbol): Likewise. * bfd-in.h (BFD_TRADITIONAL_FORMAT): Define new BFD flag to request BFD to write object in the traditional format, whatever that means for the particular backend. * bfd-in2.h: Rebuilt. * hash.c (bfd_hash_allocate): If obstack_alloc fails, set bfd_error_no_memory. Tue Jun 14 13:00:04 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * libaout.h (struct aoutdata): Add q_magic_format to subformat enum. * aout-target.h (MY_bfd_copy_private_bfd_data): Define as function if not already defined. Copy subformat information. (MY_text_includes_header): Define as 0 if not already defined. (MY(backend_data)): Use MY_text_includes_header rather than 0. (MY_final_link_callback): Rename from final_link_callback, and define only if MY_final_link_callback is not already defined. (MY_bfd_final_link): Rename use of final_link_callback to MY_final_link_callback. * aoutx.h (NAME(aout,some_aout_object_p)): Handle QMAGIC like ZMAGIC, but set the subformat to q_magic_format. Abort if the magic number if not recognized. (adjust_z_magic): Use QMAGIC if q_magic_format. * i386linux.c (MY_text_includes_header): Define as 1. (i386linux_bfd_final_link): New static function. (MY_bfd_final_link): Define as i386linux_bfd_final_link. * aoutx.h (translate_to_native_sym_flags): Check both section and output_section against sections of abfd. * libecoff.h (struct ecoff_link_hash_entry): Change type of written from boolean to char. Add new field small. * ecoff.c (ecoff_link_hash_newfunc): Initialize written to 0 rather than false. Initialize small to 0. (ecoff_link_add_externals): If ECOFF type is scSUndefined, set small. If small is set, and hash table type is common, force the symbol into a section named SCOMMON and change the ECOFF type from scCommon to scSCommon. (ecoff_link_write_external): Set written to 1 rather than true. * coff-mips.c (mips_relocate_section): Correct JMPADDR reloc overflow check to consider section VMA of input file. Mon Jun 13 14:20:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * aoutf1.h (aout_32_sunos4_write_object_contents): Handle a machine type of 68000. * aoutx.h (NAME(aout,machine_type)): Add new argument unknown. Set *unknown to true if machine type is really unknown, as opposed to M_UNKNOWN for the 68000. (NAME(aout,set_arch_mach)): Change NAME(aout,machine_type) call accordingly. * libaout.h (NAME(aout,machine_type)): Add new argument to prototype. Sun Jun 12 20:21:03 1994 Jeff Law (law@snake.cs.utah.edu) * som.c (EXEC_AUX_ID): Define based on availablity of HPUX_AUX_ID or HIUX_AUX_ID. (som_begin_writing): Use EXEC_AUX_ID instead of HPUX_AUX_ID. (som_write_armap): Use CPU_PA_RISC1_0 as the magic number. Note som.c is careful to always define CPU_PA_RISC1_0. Sat Jun 11 16:32:30 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) Add weak symbols as an extension to a.out. * aoutx.h (sym_in_text_section): Don't define. (sym_in_data_section, sym_in_bss_section): Likewise. (sym_is_undefined, sym_is_global_defn): Likewise. (sym_is_debugger_info, sym_is_fortrancommon): Likewise. (sym_is_absolute, sym_is_indirect): Likewise. (translate_from_native_sym_flags): Rewrite for clarity. Rearrange arguments and change caller. Handle weak symbols. (translate_to_native_sym_flags): Likewise. (aout_link_check_ar_symbols): Don't ignore weak symbols. Pull object in from archive if a weak defintion is found for an existing undefined symbol. (aout_link_add_symbols): Put all cases in switch. Set flags of an undefined symbol to 0. Handle weak symbols. (aout_link_write_symbols): Handle weak symbols. (aout_link_write_other_symbol): Likewise. (aout_link_input_section_std): Likewise. (aout_link_input_section_ext): Likewise. * sunos.c (sunos_write_dynamic_symbol): Likewise. Fri Jun 10 13:25:13 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * aoutx.h (NAME(aout,canonicalize_reloc)): Handle .bss section. (NAME(aout,get_reloc_upper_bound)): Likewise. * coff-i960.c (coff_i960_reloc_type_lookup): Add BFD_RELOC_CTOR. * linker.c (_bfd_generic_link_write_global_symbol): Don't assume the section of a common symbol is not NULL. Wed Jun 8 23:15:53 1994 Stu Grossman (grossman@cygnus.com) * nlmcode.h (nlm_object_p): Set EXEC_P and start address for GDB. Wed Jun 8 23:57:34 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * aoutx.h (aout_get_external_symbols): Don't try to read the strings if there are no symbols. (aout_link_write_other_symbol): Use the output section when working out the type. Tue Jun 7 13:25:08 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * elfcode.h (assign_section_numbers): Put shstrtab, symtab and strtab sections at end of file. Avoids bug in some versions of SVR4 strip. From Eric Youngdale . * coffcode.h (styp_to_sec_flags): If COFF_PAGE_SIZE is defined, set SEC_DEBUGGING for STYP_INFO sections. (coff_compute_section_file_positions): If COFF_PAGE_SIZE is defined, and D_PAGED is set, set the file position equal to the section VMA modulo COFF_PAGE_SIZE. * coffgen.c (coff_real_object_p): If F_EXEC is set, set D_PAGED. * coff-i386.c: Set D_PAGED in BFD target. (COFF_PAGE_SIZE): Define. * coff-m68k.c, coff-sparc.c: Likewise. Mon Jun 6 10:57:28 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * elfcode.h (bfd_section_from_shdr): Don't turn a reloc section into a BFD section just because SHF_ALLOC is set; require that it not use the normal symbol table. (elf_section_from_bfd_section): Corresponding change. Better indirect and warning symbol handling inspired by Stuart Quick . * linker.c (enum link_action): Add REF, MIND, CWARN, REFC. (link_action): Change UNDEF_ROW/def and UNDEFW_ROW/def from NOACT to REF. Change UNDEF_ROW/indr and UNDEFW_ROW/indr from CYCLE to REFC. Change DEF_ROW/indr and COMMON_ROW/indr from CYCLE to MDEF. Change DEFW_ROW/indr from CYCLE to NOACT. Change INDR_ROW/indr from MDEF to MIND. Change INDR_ROW/warn from WARNC to CYCLE. Change WARN_ROW/def and WARN_ROW/indr from MWARN to CWARN. Change WARN_ROW/com from MWARN to WARN. Change WARN_ROW/warn from NOACT to CYCLE. Change SET_ROW/warn from WARNC to CYCLE> (_bfd_generic_link_add_one_symbol): Handle REF, MIND, CWARN and REFC. If a new indirect symbol has been referenced, push the reference down to the symbol it points to. FIx handling of WARN. * aoutx.h (translate_from_native_sym_flags): If N_WARNING, don't clobber e_type of next symbol. (translate_to_native_sym_flags): Likewise. (aout_link_write_symbols): Loop on bfd_link_hash_warning as well as bfd_link_hash_indirect. * libaout.h (struct aout_link_hash_entry): New field written. * aoutx.h (NAME(aout,link_hash_newfunc)): Initialize written. (aout_link_write_symbols): Use written, not root.written. (aout_link_write_other_symbol): Likewise. * sunos.c (sunos_scan_dynamic_symbol): Likewise. * libecoff.h (struct ecoff_link_hash_entry): New field written. * ecoff.c (ecoff_link_hash_newfunc): Initialize written. (ecoff_link_write_external): use written, not root.written. * genlink.h (struct generic_link_hash_entry): New field written. * linker.c (_bfd_link_hash_newfunc): Don't initialize written. (generic_link_hash_newfunc): Initialize written. (_bfd_generic_link_output_symbols): Use written, not root.written. (_bfd_generic_link_write_global_symbol): Likewise. (_bfd_generic_reloc_link_order): Likewise. * libecoff.h (ecoff_data_type): Add linker field. * ecoff.c (ecoff_write_object_contents): Check new tdata linker field, rather than outsymbols being non-NULL, to decide whether to output the symbols and relocs. (ecoff_bfd_final_link): Set new tdata linker field to true. * ecoff.c (ecoff_bfd_copy_private_bfd_data): Don't try to copy data to a non-ECOFF file. * libbfd-in.h: Add warning that libbfd.h is a generated file. * libbfd.h: Rebuilt. Sun Jun 5 15:02:30 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) Changes to support ELF strip and objcopy on dynamically linked files. * elfcode.h (elf_fake_sections): Add prototype. (bfd_section_from_shdr): Make a BFD section from an SHT_HASH section, and from an SHT_DYNSYM section, and from the dynamic string table section. (elf_object_p): Set D_PAGED if there is a program header. (elf_make_sections): Remove. (fix_up_strtabs): Remove. (elf_fake_sections): Rewrite. Now sets sh_entsize. (assign_section_numbers): Rewrite. Now sets sh_link and sh_info for all sections. (elf_compute_section_file_positions): Don't call obsolete functions elf_make_sections or fix_up_strtabs. (swap_out_syms): Set sh_addralign to FILE_ALIGN rather than 4. (NAME(bfd_elf,write_object_contents)): Permit writing DYNAMIC objects. (elf_section_from_bfd_section): Treat SHT_DYNSYM like other normal sections. If an SHT_REL or SHT_RELA section is allocated or uses an unusual symbol table, permit a BFD section to map to it. Permit most SHT_STRTAB sections to have a BFD section mapped to them. (elf_bfd_final_link): Don't set sh_link, sh_info or sh_entsize fields of dynamic sections here; do it in assign_section_numbers. * elf32-target.h, elf64-target.h: Add D_PAGED to permitted object flags. * elf.c (_bfd_elf_make_section_from_shdr): Only set SEC_DATA if SEC_LOAD is set, rather than checking SEC_ALLOC. * libbfd-in.h (bfd_realloc): Change last arg to "size_t size". Fri Jun 3 10:58:02 1994 Jeff Law (law@snake.cs.utah.edu) * som.c (som_write_object_contents): Don't compute the file header's checksum here. (som_write_headers): Instead do it here. * libbfd.h (bfd_realloc): Change last arg to "size_t size". Thu Jun 2 17:39:22 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * hosts/sun3.h: Include . Don't declare free, exit or getenv. Add linker support for SunOS shared libraries. * sunos.c: Include bfdlink.h. Add many new functions and definitions for SunOS shared library support. * bfd-in.h (bfd_sunos_record_link_assignment): Declare. (bfd_sunos_size_dynamic_sections): Declare. * bfd-in2.h: Rebuilt. * aoutx.h (struct aout_link_hash_entry): Move to libaout.h. (struct aout_link_hash_table): Likewise. (aout_link_hash_lookup, aout_link_hash_traverse): Likewise. (aout_hash_table): Likewise. (NAME(aout,link_hash_newfunc)): Rename from aout_link_hash_newfunc and make externally visible. (NAME(aout,link_hash_table_init)): New function. (NAME(aout,link_hash_table_create)): Call NAME(aout,link_hash_table_init), not _bfd_link_hash_table_init. (aout_link_add_symbols): Don't fail if no symbols. If it exists, call add_dynamic_symbols backend entry point for dynamic objects. Use add_one_symbol backend entry point if it exists. (NAME(aout,final_link)): Call finish_dynamic_link backend entry point, if it exists. (aout_link_input_bfd): For a dynamic object, call link_dynamic_object backend entry point, if it exists. (aout_link_write_other_symbol): Call write_dynamic_symbol backend entry point, if it exists. (aout_link_input_section): Don't read the relocs if they have already been read. (aout_link_input_section_std): When doing a final link, for a reloc against an external symbol, call check_dynamic_reloc backend entry point, if it exists. (aout_link_input_section_ext): Likewise. * libaout.h: Protect against multiple inclusion. Include bfdlink.h. (struct aout_link_hash_entry): Move in from aoutx.h. (struct aout_link_hash_table): Likewise. (aout_link_hash_lookup, aout_link_hash_traverse): Likewise. (aout_hash_table): Likewise. (struct aout_backend_data): Add fields add_dynamic_symbols, add_one_symbol, link_dynamic_object, write_dynamic_symbol, check_dynamic_reloc, and finish_dynamic_link. (struct aout_section_data_struct): Define new structure. (aout_section_data): Define new accessor macro. (NAME(aout,link_hash_newfunc)): Declare. (NAME(aout,link_hash_table_init)): Declare. * aoutf1.h (sunos4_aout_backend): Initialize new aout_backend_data fields. * aout-target.h (MY(backend_data)): Likewise. * i386aout.c (MY(backend_data)): Likewise. * i386mach3.c (MY(backend_data)): Likewise. * mipsbsd.c (MY(backend_data)): Likewise. * sparclynx.c (sparclynx_aout_backend): Likewise. * aoutx.h (NAME(aout,slurp_symbol_table)): Don't zero out cached until we know it is non-NULL. (aout_link_write_symbols): Don't skip a warning symbol even if it has already been written out. If skipping an indirect symbol, skip the next symbol as well. Wed Jun 1 14:37:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * hosts/sun3.h: Don't declare qsort, malloc or realloc. Thu May 26 13:56:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com) * nlmcode.h (nlm_swap_auxiliary_headers_in): Cast bfd_byte pointer to char pointer to avoid compiler warnings. * dep-in.sed: Remove spaces before colons. Merged changes back in from FSF gas release 2.3: * Makefile.in (stmp-bfd.h): Wrap `if' block around grep invocation, to avoid a bug in BSD 4.4 make. From Ralph Campbell: * mipsbsd.c (mips_fix_jmp_addr): If symbol is undefined, return an error. (mips_fix_hi16_s): Ditto. Fri May 13 21:21:00 1994 DJ Delorie (dj@ctron.com) * makefile.dos: define a default target, or archives won't work due to multiple matches. Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com) * configure.bat: update for latest files * makefile.dos: update for correct targets and sources * coff-go32.c: [new] go32's COFF format (i386coff with underscores) * targets.c: add go32coff target * makefile.in: add coff-go32.c support Thu May 26 10:10:21 1994 Jeff Law (law@snake.cs.utah.edu) * som.c (som_prep_headers): Do not set the system_id here, private bfd data has not been copied yet. (som_write_headers): Instead do it here. Tue May 24 16:17:18 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) Make MIPS ELF use new ELF backend linker. No shared library support yet. * elf32-mips.c (bfd_mips_elf32_swap_gptab_in): New function. (bfd_mips_elf32_swap_gptab_out): New function. (mips_elf_object_p): If last symbol is LOCAL, set elf_bad_symtab. (mips_elf_final_write_processing): Set sh_info field for .gptab.* sections. (mips_elf_fake_sections): Set sh_entsize for .gptab.* sections. (mips_elf_read_ecoff_info): Read and free external symbols last, not first, for clarity. (struct mips_elf_link_hash_entry): Define new structure. (struct mips_elf_link_hash_table): Define new structure. (mips_elf_link_hash_lookup): Define new macro. (mips_elf_link_hash_traverse): Define new macro. (mips_elf_hash_table): Define new macro. (mips_elf_link_hash_newfunc): New static function. (mips_elf_link_hash_table_create): New static function. (mips_elf_add_symbol_hook): New static function. (struct extsym_info): Define new structure. (mips_elf_get_extr, mips_elf_set_index): Remove. (mips_elf_output_extsym): New static function. (gptab_compare): New static function. (mips_elf_final_link): Rewrite to use ELF backend linker, and to merge gptab information in input files. (mips_elf_relocate_hi16): New static function. (mips_elf_relocate_section): New static function. (bfd_elf32_bfd_link_hash_table_create): Define as macro before including elf32-target.h. (elf_backend_relocate_section): Likewise. (elf_backend_add_symbol_hook): Likewise. * elf.c (_bfd_elf_link_hash_newfunc): Rename from elf_link_hash_newfunc and make globally visible. Change caller. (_bfd_elf_link_hash_table_init): New function, broken out of _bfd_elf_link_hash_table_create. (_bfd_elf_link_hash_table_create): Use _bfd_elf_link_hash_table_init. * libelf.h (struct elf_obj_tdata): Add new field bad_symtab. (elf_bad_symtab): Define new accessor macro. (_bfd_elf_link_hash_newfunc): Declare. (_bew_elf_link_hash_table_init): Declare. * elfcode.h (elf_object_p): Call backend object_p hook after swapping in all the section headers. (map_program_segments): Correct typo: Internal for External. (elf_link_add_object_symbols): If elf_bad_symtab is set, read all the symbols. Skip STB_LOCAL symbols rather than giving an error. (elf_bfd_final_link): If elf_bad_symtab is set, allocate space for all symbols, not just locals. (elf_link_output_extsym): Only skip a symbol not mentioned by a regular file if it is mentioned by a dynamic object. (elf_link_input_bfd): If elf_bad_symtab is set, read all the symbols. Fri May 20 13:38:23 1994 Jeff Law (law@snake.cs.utah.edu) * som.c (som_set_reloc_info): Do not set any relocation info for SOM fixups which are never passed to BFD. Fri May 20 11:57:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * coff-mips.c (mips_relocate_section): Add MIPS_R_JMPADDR overflow checking. * elf32-i386.c (elf_i386_size_dynamic_sections): Add DT_DEBUG to the dynamic linking information for the benefit of the debugger. From Peter Schauer. * elf32-sparc.c (elf32_sparc_size_dynamic_sections): Likewise. * elf.c (_bfd_elf_make_section_from_shdr): New function, based on code repeated three times in bfd_section_from_shdr in elfcode.h. * libelf.h (_bfd_elf_make_section_from_shdr): Declare. * elfcode.h (bfd_section_from_shdr): Use new function _bfd_elf_make_section_from_shdr to create BFD sections. If a reloc section does not use the main symbol table, or it is part of the process image, treat it as a normal section, not relocs. * elf32-mips.c (mips_elf_section_from_shdr): Use new function _bfd_elf_make_section_from_shdr. Thu May 19 11:37:11 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * elf32-target.h, elf64-target.h: Change ar_max_namelen value from 15 to 14 to match SVR4 ar. Add support for ELF shared libraries. Loosely based on work by Eric Youngdale . * libelf.h (struct elf_backend_data): Add new fields for dynamic linking: elf_backend_create_dynamic_sections, elf_backend_adjust_dynamic_symbol, elf_backend_size_dynamic_sections, elf_backend_finish_dynamic_symbol, elf_backend_finish_dynamic_sections. (struct elf_link_hash_entry): Change type of align field to bfd_size_type. Add fields dynindx, dynstr_index, weakdef, elf_link_hash_flags. (struct elf_link_hash_table): Add fields dynobj, dynsymcount, dynstr, bucketcount. (bfd_elf32_swap_reloc_in, bfd_elf32_swap_reloc_out): Declare. (bfd_elf32_swap_reloca_in, bfd_elf32_swap_reloca_out): Declare. (bfd_elf32_swap_dyn_in, bfd_elf32_swap_dyn_out): Declare. (bfd_elf32_add_dynamic_entry): Declare. (bfd_elf64_swap_reloc_in, bfd_elf64_swap_reloc_out): Declare. (bfd_elf64_swap_reloca_in, bfd_elf64_swap_reloca_out): Declare. (bfd_elf64_swap_dyn_in, bfd_elf64_swap_dyn_out): Declare. (bfd_elf64_add_dynamic_entry): Declare. * elfcode.h (Elf_External_Dyn): Define. (elf_swap_reloc_in): Define as macro using NAME. Make externally visible. (elf_swap_reloc_out): Likewise. (elf_swap_reloca_in, elf_swap_reloca_out): Likewise. (elf_swap_dyn_in, elf_swap_dyn_out): Define as macro using NAME and as new externally visible function. (elf_fake_sections): Set section type of dynamic sections based on section names. (elf_write_phdrs): Remove. (assign_file_position_for_section): Add new align argument. Change all callers. (get_program_header_size): New static function. (struct seg_info): Remove. (map_program_segments): Completely rewrite. (assign_file_positions_except_relocs): Completely rewrite. (assign_file_positions_for_relocs): Don't set a file position for sections which already have one. Don't bother to align the file position here. (section_from_elf_index): Handle SHT_HASH and SHT_DYNAMIC section types. (elf_section_from_bfd_section): Likewise. (elf_slurp_symbol_table): If section_from_elf_index fails, just use bfd_abs_section rather than returning an error. (elf_sizeof_headers): Make useful. (elf_link_record_dynamic_symbol): New static function. (elf_link_add_object_symbols): Handle dynamic objects. (elf_link_create_dynamic_sections): New static function. (elf_add_dynamic_entry): Define as macro using NAME and as new externally visible function. (NAME(bfd_elf,record_link_assignment)): New function. (elf_buckets): New static variable. (NAME(bfd_elf,size_dynamic_sections)): New function. (struct elf_final_link_info): Add dynsym_sec and hash_sec fields. (elf_bfd_final_link): Handle dynamic linking. Create a section symbol for all ELF sections, not all BFD sections. Store section symbol index in target_index field, not index field. Traverse over global symbols even if stripping. (elf_link_output_extsym): Output dynamic symbols. Mark symbols defined by dynamic objects as undefined. (elf_link_input_bfd): Ignore dynamic objects. Use target_index field for section relocs, and make sure it is set. (elf_reloc_link_order): Use target_index field for section relocs, and make sure it is set. * elf.c (elf_link_hash_newfunc): Initialize dynindx, dynstr_index, weakdef and elf_link_hash_flags fields. (_bfd_elf_link_hash_table_create): Initialize dynobj, dynsymcount, dynstr and bucketcount fields. * elf32-target.h: Initialize new dynamic linking fields. * elf64-target.h: Likewise. * elf32-i386.c: New functions for dynamic linking support. * elf32-sparc.c: Likewise. * bfd-in.h (bfd_elf32_record_link_assignment): Declare. (bfd_elf64_record_link_assignment): Declare. (bfd_elf32_size_dynamic_sections): Declare. (bfd_elf64_size_dynamic_sections): Declare. * bfd-in2.h: Rebuilt. Wed May 18 08:29:04 1994 Ian Lance Taylor (ian@cygnus.com) * som.c: Don't include or . (som_reloc_queue_find): Call memcmp instead of bcmp. (som_bfd_reloc_type_lookup): Change first argument to bfd *. (compare_syms): Change types of arguments to const void *. (bfd_section_from_som_symbol): Removed unused local found. (som_write_armap): Add elength, map, orl_count and int arguments. (som_write_armap): Use %ld and cast to long for getuid result. Wed May 18 09:09:32 1994 Jeff Law (law@snake.cs.utah.edu) * elf32-hppa.h (R_HPPA_ABS_CALL): Define. * elf32-hppa.c (hppa_elf_gen_reloc_type): Handle absolute calls. * som.h (R_HPPA_ABS_CALL): Define. * som.c (hppa_som_gen_reloc_type): Delete complex relocation types. Tue May 17 19:33:12 1994 Ken Raeburn (raeburn@cujo.cygnus.com) * coff-i960.c (icoff_little_vec, icoff_big_vec): Indicate leading underscore, for compatibility with Intel tool chain (gnu960v2). Mon May 16 10:09:22 1994 Jeff Law (law@snake.cs.utah.edu) * bfd-in2.h: Rebuilt. * elf32-hppa.c: Change .hppa_linker_stubs to .PARISC.stubs, likewise for other PA specific sections. (hppa_elf_relocate_unwind_table): Delete unused function. (elf_hppa_howto_table): Completely new table based on 94-02-02 draft PA ELF spec. Change relocation tags appropriately throughout elf32-hppa.c (hppa_elf_gen_reloc_type): Rewrite and simplify based on 94-02-02 spec. (hppa_elf_reloc): Likewise. (hppa_look_for_stubs_in_section): Likewise (ELF_MACHINE_CODE): Change to EM_PARISC. * elf32-hppa.h: Include "elf/hppa.h". Change relocation tags appropriately throughout elf32-hppa.h. (elf32_hppa_reloc_type): New table based on 94-02-02 draft PA ELF spec. (R_HPPA_ABS_CALL, R_HPPA_COMPLEX*, R_HPPA_UNWIND): Delete definitions. * elfcode.h (prep_headers): Use EM_PARISC instead of EM_HPPA. * reloc.c (bfd_reloc_code_real): Delete unused HPPA relocations. * som.h (R_HPPA_ABS_CALL, R_HPPA_COMPLEX): Delete definitions. * libhppa.h (hppa_field_adjust): Avoid adding constant_value into the final value twice for LR and RR field selectors. Sat May 14 09:09:19 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * aoutx.h (add_to_stringtab): Use BFD_ASSERT not assert. This avoids __eprintf troubles. Fri May 13 10:51:21 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * bout.c (b_out_bfd_reloc_type_lookup): Handle BFD_RELOC_CTOR. * config/mipsbelf.mt (SELECT_VECS): Add ecoff_big_vec and ecoff_little_vec since Irix 5 supports ECOFF executables. Wed May 11 00:31:57 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * ecoff.c (ecoff_find_nearest_line): Handle fdr.adr != pdr.adr correctly. * Makefile.in (stmp-bfd.h): Use || instead of ; to force SunOS make to invoke the shell. Tue May 10 14:23:43 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * section.c (SEC_COFF_SHARED_LIBRARY): Renamed from SEC_SHARED_LIBRARY for clarity. Changed all uses. * bfd-in2.h: Rebuilt. * coffcode.h (sec_to_styp_flags): If SEC_COFF_SHARED_LIBRARY is set, set STYP_NOLOAD. * coffgen.c (coff_section_from_bfd_index): Don't get an assertion failure because of a bad shared library. Mon May 9 18:53:40 1994 Bill Cox (bill@rtl.cygnus.com) * linker.c: Add missing comment terminator. Mon May 9 11:53:54 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * linker.c (_bfd_generic_link_add_one_symbol): If hashp and *hashp are not NULL, assume the caller has already looked up the symbol in the hash table and has stored the entry in *hashp. (generic_link_add_symbol_list): Set h to NULL before calling _bfd_generic_link_add_one_symbol. * ecoff.c (ecoff_link_add_externals): Likewise. * elfcode.h (assign_file_positions_except_relocs): Don't require page shared between .data and .bss segments to contain zeroes. * elfcode.h: Include bfdlink.h. Added several new functions to do linking. (ELF_R_TYPE): Define. (bfd_add_to_strtab): Return unsigned long. Change check for realloc failure. (elf_fake_sections): Check return value of bfd_add_to_strtab. (elf_compute_section_file_positions): Add link_info argument. Call elf_backend_begin_write_processing hook and prep_headers here. Only call swap_out_syms if link_info is NULL. Set up .shstrtab section here. Pass dosyms argument to assign_file_positions_except_relocs. Set output_has_begun flag. (assign_file_positions_for_symtab_and_strtabs): Add dosyms argument, and use it to control setting .symtab and .strtab file positions. (assign_file_positions_except_relocs): Add dosyms argument, and pass it on. (prep_headers): Check return value of bfd_add_to_strtab. (swap_out_syms): Likewise. Also, don't set up .shstrtab here. (NAME(bfd_elf,write_object_contents)): Some calls moved into elf_compute_section_file_positions. (elf_set_section_contents): Likewise. (elf_slurp_symbol_table): SHN_LORESERV corrected to SHN_LORESERVE. * libelf.h: Include bfdlink.h. (struct elf_backend_data): Add fields collect, elf_add_symbol_hook, elf_backend_relocate_section. (struct bfd_elf_section_data): Add field rel_hashes. (struct elf_obj_tdata): Remove fields internal_syms and symbols. Add field sym_hashes. (obj_symbols, obj_internal_syms): Remove definitions. (elf_sym_hashes): Define. (struct elf_link_hash_entry): Define. (struct elf_link_hash_table): Define. (elf_link_hash_lookup): Define. (elf_link_hash_traverse): Define. (elf_hash_table): Define. (_bfd_elf_link_hash_table_create): Declare. (bfd_elf32_bfd_link_add_symbols): Declare. (bfd_elf32_bfd_final_link): Declare. (bfd_elf64_bfd_link_add_symbols): Declare. (bfd_elf64_bfd_final_link): Declare. * elf.c: Include bfdlink.h. (elf_link_hash_newfunc): New function. (_bfd_elf_link_hash_table_create): New function. * elf32-target.h (elf_backend_relocate_section): If not defined, define as 0 and use generic linker. Otherwise, use ELF backend linker. (elf_backend_collect): If not defined, define as false. (elf_backend_add_symbol_hook): If not defined, define as 0. (elf32_bed): Initialize new fields. * elf64-target.h: Same changes as elf32-target.h. * elf32-i386.c: Include bfdlink.h. (elf_i386_relocate_section): New function. (elf_backend_relocate_section): Define. * elf32-sparc.c: Include bfdlink.h. (elf_info_to_howto): Change type of dst from Elf32_Internal_Rela to Elf_Internal_Rela (they're the same type anyhow). (elf_sparc_relocate_section): New function. (elf_backend_relocate_section): Define. * elf32-mips.c (elf_backend_collect): Define. * Makefile.in (stmp-bfd.h): Avoid useless make error message in a different way; touch takes a numeric argument on some systems. Fri May 6 13:34:14 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * nlmcode.h (nlm_swap_auxiliary_headers_in): Rework custom header handling for latest suggested format. (nlm_swap_auxiliary_headers_out): Likewise. (nlm_compute_section_file_positions): Likewise. Fri May 6 11:11:50 1994 D. V. Henkel-Wallace (gumby@rtl.cygnus.com) * config.bfd: handle erricsson config (for OSE). Thu May 5 15:40:47 1994 Ken Raeburn (raeburn@cujo.cygnus.com) Patches from Ralph Campbell: * mipsbsd.c (mips_fix_jmp_addr): New function. (mips_fix_hi16_s): Use bfd_is_com_section. (mips_howto_table_ext): Call mips_fix_jmp_addr for MIPS_RELOC_JMP. Fri May 6 11:48:55 1994 Steve Chamberlain (sac@cygnus.com) * config/go32.mh: XX support. From bill * Makefile.in: Build sysdep.h without causing worrying but harmless error message. Wed May 4 11:09:53 1994 Ian Lance Taylor (ian@cygnus.com) Changed m68k-aout to set flags to 0; m68k-sunos still uses 1. * aout0.c: New file. * targets.c (aout0_big_vec): Declare. (bfd_target_vector): Add aout0_big_vec. * config.bfd (m68*-*-aout*): Use m68k-0aout, not m68k-aout. * config/m68k-aout.mt (SELECT_VECS): Removed. * config/m68k-0aout.mt: New file. * configure.in (aout0_big_vec): New target vector: use aout0.o, aout32.o and stab-syms.o. * Makefile.in: Rebuilt dependencies. (BFD32_BACKENDS): Add aout0.o. (CFILES): Add aout0.c. * libaout.h (struct aout_backend_data): Add field exec_hdr_flags. * aout-target.h (MY_exec_hdr_flags): If not defined, define as 0. MY(backend_data): Initialize exec_hdr_flags field. * aoutf1.h (sunos_32_set_arch_mach): Make static. (aout32_sunos4_write_object_contents): Set flags from backend info. (MY_exec_hdr_flags): If not defined, define as 1. (sunos4_aout_backend): Initialize exec_hdr_flags field. * aout-encap.c (encap_write_object_contents): Set flags from backend info. (MY_exec_hdr_flags): Define as N_FLAGS_COFF_ENCAPSULATE. * hp300hpux.c (MY_exec_hdr_flags): Define as 0x2. (MY(write_object_contents)): Set flags from backend info. * i386aout.c (MY(backend_data)): Initialize exec_hdr_flags field. * i386mach3.c (MY(backend_data)): Likewise. * mipsbsd.c (MY(backend_data)): Likewise. * sparclynx.c (NAME(aout,sparclynx_write_object_contents)): Set flags from backend info. (sparclynx_aout_backend): Initialize exec_hdr_flags field. Wed May 4 02:56:00 1994 Ken Raeburn (raeburn@kr-pc.cygnus.com) * config.bfd (i386-*-gnu*): Treat like i386-*-mach*. (m68*-apollo-*): Treat all Apollo configs the same, don't handle BSD specially. Tue May 3 19:43:21 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * cache.c: Rewrote to work correctly. * libbfd.h: Rebuilt. * opncls.c (bfd_cache_init, bfd_open_file): Don't declare. (bfd_fdopenr): Check return value of bfd_cache_init. Fri Apr 29 15:08:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * cf-m68klynx.c (CALC_ADDEND): Check for PC relative relocs by enumerating them, since the reloc type can not serve as an index into the m68k COFF howto_table. Fri Apr 29 09:42:39 1994 Steve Chamberlain (sac@cygnus.com) * config.bfd (*-go32): Changed to coff. * coff-h8300.c (JMPL1): Get HOWTO right for 24bit branches. * srec.c (srec_write_symbols): Write out the correct number of symbols and don't stick in extra nulls. Tue Apr 26 15:07:24 1994 Stan Shebs (shebs@andros.cygnus.com) * cf-sparclynx.c (LYNXOS, COFF_LONG_FILENAMES): Define. * coff-sparc.c (BADMAG): Recognize LYNXCOFFMAGIC. (COFF_SPARC): Define. * coffcode.h (coff_new_section_hook): If COFF_SPARC, set alignment power of data and bss sections to 3. * hosts/lynx.h (__LYNXOS): Define. Tue Apr 26 15:04:26 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * elf32-hppa.c (hppa_elf_reloc): Adjust the addend of relocations against section symbols to avoid losing during ld -r. Tue Apr 26 12:16:41 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * elfcode.h (shstrtab_length_fixed): Remove useless static variable. (struct elf_sect_data): Remove unused structure. (elf_object_p): Free memory if error occurs. Check return value of bfd_default_set_arch_mach. If elf_get_str_section fails, preserve error code rather than setting wrong_format. (null_shdr): Remove static variable. (assign_section_numbers): Remove shstrtab_length_fixed assignment. Allocate first section header on BFD obstack rather than using null_shdr. (bfd_prpsinfo): Remove unused local variable newsect. Mon Apr 25 15:31:04 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * elfcode.h (write_relocs): Undo patch of Apr 10; breaks Solaris. * elfcode.h (bfd_section_from_shdr): Use bfd_make_section_anyway to create sections. Check return value of recursive calls. (bfd_section_from_phdr): Check return value of bfd_make_section. (elf_symbol_from_bfd_symbol): Likewise. (elf_object_p): Check return value of bfd_section_from_shdr. (section_from_elf_index): Likewise. (elf_slurp_symbol_table): Check return value of section_from_elf_index. (bfd_prstatus): Return boolean value. Check return value of bfd_make_section. (bfd_fpregset): Likewise. (bfd_prpsinfo): Return boolean value. (elf_corefile_note): Check return values of bfd_prstatus, bfd_fpregset, and bfd_prpsinfo. (elf_core_file_p): Check return value of elf_corefile_note. Fri Apr 22 11:08:38 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) Get rid of the ECOFF .reginfo section hack. * ecoff.c (ecoff_mkobject_hook): Don't create a .reginfo section. (ecoff_new_section_hook): Don't handle the .reginfo section. (ecoff_sizeof_headers): Likewise. (ecoff_get_section_contents): Likewise. (ecoff_compute_section_file_positions): Likewise. (ecoff_compute_reloc_file_positions): Likewise. (ecoff_set_section_contents): Likewise. (ecoff_write_object_contents): Likewise. (ecoff_bfd_final_link): Likewise. (ecoff_bfd_copy_private_bfd_data): Copy the GP value and the register masks. (bfd_ecoff_get_gp_value): New function. (bfd_ecoff_set_gp_value): New function. (bfd_ecoff_set_regmasks): New function. * bfd-in.h (bfd_ecoff_get_gp_value): Declare. (bfd_ecoff_set_gp_value): Declare. (bfd_ecoff_set_regmasks): Declare. * bfd-in2.h: Rebuilt. Fix ECOFF objcopy to actually copy debugging information. * ecoff.c (ecoff_bfd_copy_private_bfd_data): New function. (ecoff_get_extr): Assume that any ECOFF symbol with local clear is an external symbol, rather than checking the symbol flags. Only check the flags for non-ECOFF symbols. * ecofflink.c (bfd_ecoff_debug_externals): Don't crash if the output_section field of the symbol section is NULL. * libecoff.h (ecoff_bfd_copy_private_bfd_data): Declare as function rather than defining as macro. * ieee.c (ieee_object_p): Set bfd_error_got_wrong_format if appropriate. * targets.c (bfd_target_vector): Add bfd_elf32_powerpc_vec. * aout-adobe.c (aout_adobe_set_arch_mach): Check return value of bfd_default_set_arch_mach. Accept bfd_arch_m68k as well as bfd_arch_unknown. * coffcode.h (coff_set_arch_mach): Check return value of bfd_default_set_arch_mach. * elfcode.h (elf_set_arch_mach): Don't check a list of ELF architectures, just see if the desired architecture matches what the ELF backend permits. * coffcode.h (coff_set_arch_mach_hook): Rename SHMAGIC to SH_ARCH_MAGIC to match change in coff/sh.h. (coff_set_flags): Likewise. Follow convention in which each NLM header has an 8 byte stamp followed by a four byte length. * libnlm.h (struct nlm_obj_tdata): Rename nlm_cygnus_section_hdr to nlm_cygnus_ext_header, and change type to Nlm_Internal_Cygnus_Ext_Header. (nlm_cygnus_ext_header): Rename from nlm_cygnus_section_header. * nlmcode.h (nlm_swap_auxiliary_headers_in): Use CyGnUsEx instead of CyGnUsSeCs. Rename from cygnus_section to cygnus_ext. Require length word to be 8. (nlm_swap_auxiliary_headers_out): Rename from cygnus_section to cygnus_ext. Set length word to 8. (nlm_compute_section_file_positions): Rename from cygnus_section to cygnus_ext. Thu Apr 21 22:54:22 1994 Stu Grossman (grossman at cygnus.com) * nlmcode.h (nlm_swap_auxiliary_headers_in): Keep section table (from CyGnUsSeCs) in more permanent memory to keep section names from getting trashed. Thu Apr 21 09:29:37 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * libelf.h (elf_obj_tdata): Add members for dynamic symbol table handling. * elfcode.h (bfd_section_from_shdr): Handle dynamic symbol table. * elfcode.h (elf_slurp_symbol_table): Take additional parameter to select static or dynamic symbol table and return number of symbols slurped or -1 on error. * elfcode.h (elf_get_symtab): Set bfd symcount from elf_slurp_symbol_table result. * elfcode.h (elf_get_dynamic_symtab_upper_bound, elf_canonicalize_dynamic_symtab): New functions to handle dynamic symbol table. * elf32-target.h, elf64-target.h (BFD_JUMP_TABLE_DYNAMIC): Change to handle dynamic symbol table, provide default definitions for dynamic relocs. * aoutx.h (howto_table_std, NAME(aout,swap_std_reloc_out), NAME(aout,swap_std_reloc_in), aout_link_input_section_std, aout_link_reloc_link_order): Handle r_jmptable and r_relative relocations. Thu Apr 21 11:58:19 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) Clean up uses of _bfd_dummy_target (from Peter Schauer). * libbfd.c (_bfd_dummy_target): Set bfd_error_wrong_format. * nlm-target.h (nlm_core_file_p): Define as _bfd_dummy_target, not NULL. * srec.c (srec_vec): Use _bfd_dummy_target, not NULL, in _bfd_check_format. (symbolsrec_vec): Likewise. * tekhex.c (tekhex_vec): Likewise. * libnlm.h (struct nlm_obj_tdata): Add nlm_cygnus_section_hdr field. (nlm_cygnus_section_header): New accessor macro. * nlmcode.h (nlm_object_p): Free new tdata structure if failure. Add fixed sections before swapping in auxiliary headers. After adding sections, treat errors as real, not as wrong format. (nlm_swap_auxiliary_headers_in): Swap in the sections header; add sections to the BFD for each section it describes. (nlm_swap_auxiliary_headers_out): Swap out the sections header. (nlm_compute_section_file_positions): Account for the size of the sections header. Wed Apr 20 16:45:51 1994 Ken Raeburn (raeburn@cujo.cygnus.com) * coff-sparc.c (sparccoff_vec): Change minimum alignment power to 2, so that stab sections can be multiples of 4 bytes only. * hosts/i386aix.h: Changes to avoid prototypes conflicts with the ones defined in stdlib.h. (From Minh Tran-Le.) Wed Apr 20 14:15:21 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * nlm32-ppc.c: Complete rewrite for new version of PowerPC NetWare. Old code still present, but ifdeffed out. * nlmcode.h (nlm_swap_auxiliary_headers_in): Don't assume a particular format for the customer header. Allocate a block of memory and read it into that. (nlm_swap_auxiliary_headers_out): Write out the block of memory. (nlm_compute_section_file_positions): Include length of customer header when computing its size. Mon Apr 18 14:27:17 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * som.c (som_prep_headers): Get the space's number from the backend private section data rather than target_index. (bfd_som_set_section_attributes): Store the space's number in the backend private section data rather than target_index. * som.h (som_copyable_section_data_struct): Add space_number. Fri Apr 15 12:22:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * coff-a29k.c (reloc_processing): Always set the address of a R_IHCONST reloc to that of the immediately preceding R_IHIHALF. gas does this anyhow, but some other assemblers seem to leave garbage in the R_IHCONST address field. * bfd/archive.c: Consistently use ARFMAG; from schwab@issan.informatik.uni-dortmund.de (Andreas Schwab). (_bfd_write_archive_contents): Use ARFMAG rather than '`' and '\012'. (bsd_write_armap): Likewise. (coff_write_armap): Likewise. * coff-mips.c (mips_relocate_section): When relaxing, adjust local relocs against the .text section as required. * ecofflink.c (bfd_ecoff_debug_accumulate): When relaxing, adjust PDR addresses as required. * ecoff.c (ecoff_emit_aggregate): Take fdr argument. Map fdr index through rfd map if it exists. Check for a couple of cases which gdb handles specially. Change all callers. (ecoff_type_to_string): Take fdr argument rather than aux_ptr and bigendian argument. Change all callers. (ecoff_print_symbol): Handle stStruct, stUnion and stEnum. Thu Apr 14 13:05:10 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * coff-mips.c (mips_howto_table): Add dummy entries to account for numbering changes in include/coff/mips.h. Add entries for MIPS_R_RELHI and MIPS_R_RELLO. (mips_ecoff_swap_reloc_in): Handle an extra bit for the reloc type when little endian. Treat internal MIPS_R_RELLO or MIPS_R_RELHI relocs like MIPS_R_SWITCH, and convert r_offset from 24 to 32 bits. (mips_ecoff_swap_reloc_out): Likewise. (mips_adjust_reloc_in): Handle internal MIPS_R_RELLO or MIPS_R_RELHI relocs like MIPS_R_SWITCH. (mips_adjust_reloc_out): Likewise. (mips_relhi_addr, mips_relhi_addend): New static variables. (mips_relhi_reloc, mips_rello_reloc): New functions. (mips_bfd_reloc_type_lookup): Turn BFD_RELOC_PCREL_HI16_S into MIPS_R_RELHI and turn BFD_RELOC_PCREL_LO16 into MIPS_R_RELLO. (mips_relocate_hi): Rename from mips_relocate_refhi, and add pcrel argument. Changed all callers. (mips_relocate_section): Rename got_reflo to got_lo and reflo_int_rel to lo_int_rel. Handle MIPS_R_RELLO and MIPS_R_RELHI relocs. (mips_relax_section): Adjust MIPS_R_RELHI/MIPS_R_RELLO pairs when expanding a PC relative call. * reloc.c (bfd_reloc_code_real_type): Add BFD_RELOC_PCREL_HI16_S and BFD_RELOC_PCREL_LO16. * bfd-in2.h: Rebuilt. Wed Apr 13 11:50:07 1994 Stan Shebs (shebs@andros.cygnus.com) * coff-sparc.c (sparccoff_vec): Set minimum alignment power to 3. Tue Apr 12 13:36:20 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * som.c (som_write_fixups): Always emit at least one relocation for any non-bss section. Mon Apr 11 14:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * elfcode.h (assign_file_positions_except_relocs): Don't require the file alignment to correspond to the page size when linking with -N. Sun Apr 10 01:02:24 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * elfcode.h (write_relocs): For rela relocations, adjust the addend for relocations involving section symbols to account for the lossage of 1:1 mapping from input section symbols to output section symbols. Fri Apr 8 12:22:02 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * aoutx.h (NAME(aout,make_sections)): New function. (NAME(aout,some_aout_object_p)): Call NAME(aout,make_sections) rather than making sections inline. (NAME(aout,mkobject)): Don't make any sections. (NAME(aout,adjust_sizes_and_vmas)): Call NAME(aout,make_sections). (NAME(aout,final_link)): Don't dereference obj_textsec (abfd) or obj_datasec (abfd) if they are NULL. * libaout.h (NAME(aout,make_sections)): Declare. * bout.c (b_out_mkobject): Don't make any sections. (b_out_write_object_contents): Call aout_32_make_sections. (b_out_set_section_contents): Likewise. * i386os9k.c (os9k_mkobject): Don't make any sections. (os9k_write_object_contents): Call aout_32_make_sections. (os9k_set_section_contents): Likewise. * aoutx.h (NAME(aout,new_section_hook)): Don't set N_EXT in target index. Wed Apr 6 20:44:56 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * config.bfd, configure.host: Add mips-*-sysv4* support. Thu Apr 7 14:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * coff-mips.c (mips_howto_table): Add entry for MIPS_R_SWITCH. (mips_ecoff_swap_reloc_in): For MIPS_R_SWTICH, copy r_symndx into r_offset and set r_symndx to RELOC_SECTION_TEXT. (mips_ecoff_swap_reloc_out): For MIPS_R_SWITCH, get the r_symndx value from the r_offset field. (mips_adjust_reloc_in): Maximum r_type value is now MIPS_R_SWITCH. For MIPS_R_SWITCH, copy the r_offset field into the addend field. (mips_adjust_reloc_out): For MIPS_R_SWITCH, copy the addend field into the r_offset field. (mips_switch_reloc): New function. (mips_bfd_reloc_type_lookup): Translate BFD_RELOC_GPREL32 into MIPS_R_SWITCH. (mips_relocate_section): Handle MIPS_R_SWITCH. (mips_relax_section): Adjust MIPS_R_SWITCH offset if necessary. Thu Apr 7 11:10:51 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * elfcode.h (elf_set_section_contents): Support calling the backend function elf_backend_begin_write_processing when just beginning to write an object file. * libelf.h (elf_backend_begin_write_processing): Declare. * elf{32,64}-target.h (elf_backend_begin_write_processing): Provide a default definition. (elf{32,64}_bed): Add elf_backend_begin_write_processing. * elf32-hppa.h (elf_hppa_tc_symbol): Delete extern declaration. (elf_hppa_tc_make_sections): Likewise. * elf32-hppa.c (symext_chain_built): Delete. (symext_chain_size): Renamed from symextn_contents_real_size. (elf32_hppa_backend_{begin,final}_write_processing): New functions. (add_entry_to_symext_chain): New function. (hppa_elf_set_section_contents): Ignore writes to the symbol extension section until it's been rebuilt internally. (hppa_elf_get_section_contents): Symbol extension section is no longer special. (elf_backend_{begin,final}_write_processing): Define. (elf_hppa_tc_make_sections): Simplify now that much code has migrated into elf32_hppa_backend_{being,final}_write_processing. Wed Apr 6 17:24:14 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) Add new target vectors to read the dynamic symbols and dynamic relocs. Change a.out to use these rather than reading the dynamic symbols and relocs along with the normal symbols and relocs. * targets.c (bfd_target): Add fields _bfd_get_dynamic_symtab_upper_bound, _bfd_canonicalize_dynamic_symtab, _bfd_get_dynamic_reloc_upper_bound, _bfd_canonicalize_dynamic_reloc. (BFD_JUMP_TABLE_DYNAMIC): Define. * libbfd-in.h (_bfd_nodynamic_get_dynamic_symtab_upper_bound): Define. (_bfd_nodynamic_canonicalize_dynamic_symtab): Define. (_bfd_nodynamic_get_dynamic_reloc_upper_bound): Define. (_bfd_nodynamic_canonicalize_dynamic_reloc): Define. * bfd.c (bfd_get_dynamic_symtab_upper_bound): Define. (bfd_canonicalize_dynamic_symtab): Define. (bfd_get_dynamic_reloc_upper_bound): Define. (bfd_canonicalize_dynamic_reloc): Define. * sunos.c (MY_read_dynamic_symbols): Don't define. (MY_read_dynamic_relocs): Don't define. (MY_get_dynamic_symtab_upper_bound): Define. (MY_canonicalize_dynamic_symtab): Define. (MY_get_dynamic_reloc_upper_bound): Define. (MY_canonicalize_dynamic_reloc): Define. (struct sunos_dynamic_info): Change type of dynsym_count and dynrel_count to long. Add fields canonical_dynsym and canonical_dynrel. (sunos_read_dynamic_info): Check that BFD had DYNAMIC flag set. Clear info->canonical_dynsym and info->canonical_dynrel. (MY(read_dynamic_symbols)): Removed. (MY(read_dynamic_relocs)): Removed. (sunos_get_dynamic_symtab_upper_bound): New function. (sunos_canonicalize_dynamic_symtab): New function. (sunos_get_dynamic_reloc_upper_bound): New function. (sunos_canonicalize_dynamic_reloc): New function. * libaout.h: Declare struct reloc_ext_external and reloc_std_external to avoid prototype problems. (struct aout_backend_data): Remove fields read_dynamic_symbols and read_dynamic_relocs. (NAME(aout,translate_symbol_table)): Declare. (NAME(aout,swap_ext_reloc_in)): Declare. (NAME(aout,swap_std_reloc_in)): Declare. * aoutx.h (NAME(aout,translate_symbol_table)): Renamed from translate_symbol_table and made non-static. Changed all callers. (NAME(aout,slurp_symbol_table)): Don't read dynamic symbols. (NAME(aout,slurp_reloc_table)): Don't read dynamic relocs. (NAME(aout,get_reloc_upper_bound)): Don't count dynamic relocs. * aoutf1.h (aout_32_sunos4_write_object_contents): Don't bother to remove dynamic symbols and relocs. They will no longer be present. (MY_read_dynamic_symbols): Don't define. (MY_read_dynamic_relocs): Don't define. (sunos4_aout_backend): Don't initialize dynamic entry points. * aout-target.h (MY_read_dynamic_symbols): Don't define. (MY_read_dynamic_relocs): Don't define. (MY(backend_data)): Don't initialize dynamic entry points. (MY_get_dynamic_symtab_upper_bound): If not defined, define to _bfd_nodynamic version. (MY_canonicalize_dynamic_symtab): Likewise. (MY_get_dynamic_reloc_upper_bound): Likewise. (MY_canonicalize_dynamic_reloc): Likewise. * All backends: Added BFD_JUMP_TABLE_DYNAMIC to target vector. * bfd-in2.h: Rebuilt. * libbfd.h: Rebuilt. * cf-m68klynx.c: Include sysdep.h. * hp300hpux.c: Removed some spaces in uses of NAME to avoid problems with traditional C compilers. * targets.c (bfd_target): Rearranged fields in target vector. Removed _bfd_debug_info_start, _bfd_debug_info_end and _bfd_debug_info_accumulate, which were never used. (BFD_JUMP_TABLE_GENERIC, BFD_JUMP_TABLE_COPY): Defined. (BFD_JUMP_TABLE_CORE, BFD_JUMP_TABLE_ARCHIVE): Defined. (BFD_JUMP_TABLE_SYMBOLS, BFD_JUMP_TABLE_RELOCS): Defined. (BFD_JUMP_TABLE_WRITE, BFD_JUMP_TABLE_LINK): Defined. * All backends: Changed to use the new BFD_JUMP_TABLE_* macros rather than the single JUMP_TABLE macro. Removed many of the weird macro definitions needed to support the monolithic JUMP_TABLE. * bfd-in.h (JUMP_TABLE): Removed. * libbfd-in.h: Define a bunch of macros, and declare a few functions, for use with the new BFD_JUMP_TABLE_* macros. * libbfd.c (_bfd_dummy_new_section_hook): Removed. (bfd_false): Set bfd_error_invalid_operation. (bfd_nullvoidptr): Likewise. (bfd_n1): New function. (_bfd_nocore_core_file_matches_executable_p): Renamed from _bfd_dummy_core_file_matches_executable_p. (_bfd_nocore_core_file_failing_command): Similar rename. Set bfd_error_invalid_operation. (_bfd_nocore_core_file_failing_signal): Likewise. (_bfd_generic_get_section_contents): Renamed from bfd_generic_get_section_contents. Changed all callers. (_bfd_generic_set_section_contents): Similar rename. * ieee.c: #if 0 out ieee_bfd_debug_info_start, ieee_bfd_debug_info_end, ieee_bfd_debug_info_accumulate. They were never called. * bfd-in2.h: Rebuilt. * libbfd.h: Rebuilt. Tue Apr 5 22:10:04 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * Crude support for examining dynamic libraries. * som.c (som_object_setup): Set DYNAMIC flag for SHL_MAGIC and DL_MAGIC objects. (som_prep_headers): Preserve the system_id for DYNAMIC objects. Use SHL_MAGIC as the magic number of the DYNAMIC flag is set. Write exec headers for DYNAMIC objects. (som_begin_writing): DYNAMIC objects have the same alignment restrictions as D_PAGED objects. (bfd_section_from_som_symbol): Treat DYNAMIC objects like EXEC_P objects. (object_flags): Add DYNAMIC. Tue Apr 5 17:48:52 1994 Stan Shebs (shebs@andros.cygnus.com) * i386lynx.c, sparclynx.c (NAME): Remove embedded whitespace in macro uses, confuses some non-ANSI compilers. Tue Apr 5 15:50:01 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * som.c (som_bfd_free_cached_info): Add missing PARAMS decl. Don't free anything if we don't have a bfd_object. (som_close_and_cleanup): Call som_bfd_free_cached_info. Tue Apr 5 11:22:38 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * elf32-mips.c (mips_elf_final_link): Don't remove empty sections. It turns out not to be required on Irix 5, and it causes problems if the sections happen to contain symbols. * elfcode.h (write_shdrs_and_ehdr): Correct bfd_write check. * aoutx.h (NAME(aout,canonicalize_reloc)): Don't error out if section->relocation is NULL; malloc might have returned NULL when given a zero size if there were no relocations. * bout.c (b_out_canonicalize_reloc): Likewise. * coffcode.h (coff_canonicalize_reloc): Likewise. * ecoff.c (ecoff_canonicalize_reloc): Likewise. * elfcode.h (elf_canonicalize_reloc): Likewise. * mipsbsd.c (MY(canonicalize_reloc)): Likewise. * i386lynx.c (NAME(lynx,canonicalize_reloc)): Likewise. * nlmcode.h (nlm_canonicalize_reloc): Likewise. * som.c (som_canonicalize_reloc): Likewise. * hp300hpux.c (MY(slurp_reloc_table)): Likewise. Also, if malloc returns NULL, don't report an error if we asked for zero bytes. * i386lynx.c (NAME(lynx,slurp_reloc_table)): If malloc returns NULL, don't report an error if we asked for zero bytes. * nlmcode.h (nlm_slurp_reloc_fixups): Likewise. Mon Apr 4 15:30:49 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * aoutx.h (NAME(aout,bfd_free_cached_info)): Don't free anything if we don't have a bfd_object. Made sure that every call to bfd_read, bfd_write, and bfd_seek checks the return value and handled bfd_error correctly. These changes are not itemised. Also: * aoutx.h (emit_strtab): Change return type to boolean, and return errors. (NAME(aout,write_syms)): Check emit_strtab return value. (NAME(aout,final_link)): Likewise. * coffcode.h (coff_write_relocs): Change return type to boolean, and return errors. (coff_write_object_contents): Check coff_write_relocs return value. * i386os9k.c (os9k_swap_exec_header_in): Change return type to boolean. (os9k_object_p): Check os9k_swap_exec_header_in return value. * oasys.c (oasys_read_record): Change return type to boolean. (oasys_slurp_symbol_table: Check oasys_read_record return value. (oasys_object_p, oasys_slurp_section_data): Likewise. (oasys_write_record): Change return type to boolean. (oasys_write_syms): Likewise. Also, check oasys_write_record return value. (oasys_write_sections): Check oasys_write_record return value. (oasys_write_header): Change return type to boolean. Check oasys_write_record return value. (oasys_write_end, oasys_write_data): Likewise. (oasys_write_object_contents): Check return values of oasys_write_header, oasys_write_syms, oasys_write_data, and oasys_write_end. * srec.c (srec_write_record): Change return type to boolean. (srec_write_header): Likewise. Also, check srec_write_record return value. (srec_write_section, srec_write_terminator): Likewise. (srec_write_symbols): Change return type to boolean. (internal_srec_write_object_contents): Check return value of srec_write_symbols, srec_write_header, srec_write_section, and srec_write_terminator. * Makefile.in: Rebuilt dependencies. Mon Apr 4 10:56:45 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * aix386-core.c (aix386_bfd_is_local_label): Correct cast from asection to asymbol. * ptrace-core.c (ptrace_unix_bfd_is_local_label): Correct cast from bfd to asymbol. * trad-core.c (trad_unix_bfd_is_local_label): Correct cast from asection to asymbol. Sun Apr 3 18:27:29 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * som.c (som_slurp_string_table): Use malloc to allocate space for the cached copy of the native string table. (som_slurp_symbol_table): Likewise for the native symbol table. (som_slurp_reloc_table): Likewise for the native and generic relocation tables. (som_bfd_free_cached_info): Free the cached native strings, symbols, and relocations. Also free the canonical cached relocations. Fri Apr 1 12:40:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * aoutx.h (aout_link_write_symbols): If keep_memory is false, make sure the symbol name is stored in permanent memory before adding it to the string table. * archive.c (_bfd_write_archive_contents): Once we've found an object, don't bother to look for more when deciding whether to build a map. (compute_and_write_armap): After adding the symbols for a BFD, call bfd_free_cached_info on it. Add bfd_free_cached_info support to a.out backends. * aoutx.h (aout_get_external_symbols): Renamed from aout_link_get_symbols. Read strings even if symbols have been read. Store string size in obj_aout_string_size. (NAME(aout,slurp_symbol_table)): Call aout_get_external_symbols to read the symbols. Allocate the cached symbols with malloc, not bfd_alloc. (NAME(aout,slurp_reloc_table)): Allocate the cached relocs with malloc, not bfd_alloc. (NAME(aout,bfd_free_cached_info)): New function; free cached symbols and relocs. * libaout.h (struct aoutdata): Add external_string_size field. (obj_aout_external_string_size): New accessor macro. (NAME(aout,close_and_cleanup)): Don't declare. (NAME(aout,bfd_free_cached_info)): Declare. (aout_32_close_and_cleanup): Don't define. (aout_64_close_and_cleanup): Don't define. * aout-target.h (MY_bfd_free_cached_info): If not already defined, define as NAME(aout,free_cached_info). (MY_close_and_cleanup): If not already defined, define as MY_bfd_free_cached_info. * aout-adobe.c (aout_32_close_and_cleanup): Define. (aout_32_bfd_free_cached_info): Don't define. * bout.c (aout_32_close_and_cleanup): Define. (aout_32_bfd_free_cached_info): Don't define. * hp300hpux.c (MY_bfd_free_cached_info): Define as bfd_true. (MY_close_and_cleanup): Don't define. * i386lynx.c (NAME(lynx,slurp_reloc_table)): Allocate the cached relocs with malloc, not bfd_alloc. * i386os9k.c (aout_32_close_and_cleanup): Define. (aout_32_bfd_free_cached_info): Don't define. Add a new entry point to free memory cached by a BFD. * targets.c (bfd_target): Add _bfd_free_cached_info field. * bfd.c (bfd_free_cached_info): Define. * bfd-in.h (JUMP_TABLE): Add _bfd_free_cached_info. * bfd-in2.h: Rebuilt. * All backends: Initialize bfd_free_cached_info entry point to bfd_true. * elf32-hppa.c (elf_hppa_reloc_type_lookup): Correct type of first, unused, argument. (hppa_elf_is_local_label): Declare instead of som_bfd_is_local_label. * coff-a29k.c (a29k_reloc): Add reloc_entry->address to value of absolute R_IREL reloc. Thu Mar 31 11:52:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) Added some support for Irix 4 shared libraries. * ecoff.c (ecoff_new_section_hook): Set SEC_SHARED_LIBRARY for a .lib section. (ecoff_sec_to_styp_flags): Set SEC_SHARED_LIBRARY if STYP_ECOFF_LIB bit is set. (ecoff_compute_section_file_positions): Round the contents of a .lib section up to the next page boundary. (ecoff_set_section_contents): If we see a .lib section, increment the vma by one to count the number of shared libraries we have. (ecoff_write_object_contents): Don't crash if we see a STYP_ECOFF_LIB section, and don't adjust text_start or data_start or bss_size either. * coffcode.h (CALC_ADDEND): Change to fetch original symbol value from original BFD, rather than using value of current BFD symbol. Needed for new linker. * coff-sparc.c (CALC_ADDEND): Likewise. * ecoff.c (ecoff_write_object_contents): Set the text_start and data_start entries in the optional header correctly even if a text or data section starts at location zero. * reloc.c (bfd_reloc_code_real_type): Added BFD_RELOC_26 (from sef and raeburn). * bfd-in2.h: Rebuilt. * nlm32-i386.c (nlm_i386_read_import): Null terminate the symbol name. * nlm32-alpha.c (nlm_alpha_read_import): Likewise. * nlm32-sparc.c (nlm_sparc_read_import): Likewise. * coffgen.c (coff_write_symbol): Reindented. Changed to return boolean, and changed written to unsigned int *. Check error returns from called functions. (coff_write_alien_symbol): Likewise. (coff_write_native_symbol): Likewise. (coff_write_symbols): Likewise. Reworked checks on whether to write symbol name to string table for clarity and to avoid core dumping when given a non COFF symbol. * libcoff-in.h (coff_write_symbols): Declare as returning boolean. * libcoff.h: Rebuilt. * coffcode.h (coff_write_object_contents): Check return value of coff_write_symbols. Wed Mar 30 16:25:41 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) Changes to let BFD return an error indication from get_symtab_upper_bound, bfd_canonicalize_symtab, bfd_get_reloc_upper_bound, and bfd_canonicalize_reloc. They now return long instead of unsigned int, and use -1 to indicate an error. Along the way, rename get_symtab_upper_bound to bfd_get_symtab_upper_bound. * bfd.c (bfd_get_reloc_upper_bound): Return long, and -1 on errors. (bfd_canonicalize_reloc): Likewise. * syms.c (bfd_get_symtab_upper_bound): Renamed from get_symtab_upper_bound. * targets.c (bfd_target): Renamed _get_symtab_upper_bound to _bfd_get_symtab_upper_bound, and changed it and _bfd_canonicalize_symtab and _get_reloc_upper_bound and _bfd_canonicalize_reloc to all return long. * aoutx.h (NAME(aout,get_symtab)): Return long, and -1 on errors. (NAME(aout,canonicalize_reloc)): Likewise. (NAME(aout,get_reloc_upper_bound)): Likewise. (NAME(aout,get_symtab_upper_bound)): Likewise. * bout.c (b_out_canonicalize_reloc): Likewise. (b_out_get_reloc_upper_bound): Likewise. * coffcode.h (coff_canonicalize_reloc): Likewise. * coffgen.c (coff_get_symtab_upper_bound): Likewise. (coff_get_symtab): Likewise. (coff_get_reloc_upper_bound): Likewise. * ecoff.c (ecoff_get_symtab_upper_bound): Likewise. (ecoff_get_symtab): Likewise. (ecoff_canonicalize_reloc): Likewise. * elfcode.h (elf_get_symtab_upper_bound): Likewise. (elf_get_reloc_upper_bound): Likewise. (elf_canonicalize_reloc): Likewise. (elf_get_symtab): Likewise. * hp300hpux.c (MY(get_symtab)): Likewise. (MY(get_symtab_upper_bound)): Likewise. (MY(canonicalize_reloc)): Likewise. * i386lynx.c (NAME(lynx,canonicalize_reloc)): Likewise. * ieee.c (ieee_slurp_external_symbols): Change return type to boolean. Check for errors from get_symbol. (ieee_slurp_symbol_table): Change return type to boolean. Check for errors from ieee_slurp_external_symbols. (ieee_get_symtab_upper_bound): Return long, and -1 on errors. (ieee_get_symtab): Likewise. (ieee_get_reloc_upper_bound): Likewise. (ieee_canonicalize_reloc): Likewise. * mipsbsd.c (MY(canonicalize_reloc)): Likewise. * nlmcode.h (nlm_get_symtab_upper_bound): Likewise. (nlm_get_symtab): Likewise. (nlm_get_reloc_upper_bound): Likewise. (nlm_canonicalize_reloc): Likewise. * oasys.c (oasys_get_symtab_upper_bound): Likewise. (oasys_get_symtab): Likewise. (oasys_get_reloc_upper_bound): Likewise. (oasys_canonicalize_reloc): Likewise. * som.c (som_get_symtab_upper_bound): Likewise. (som_get_symtab): Likewise. (som_get_reloc_upper_bound): Likewise. (som_canonicalize_reloc): Likewise. * srec.c (srec_get_symtab_upper_bound): Likewise. (srec_get_symtab): Likewise. (srec_get_reloc_upper_bound): Define as bfd_0l. (srec_canonicalize_reloc): Likewise. * tekhex.c (tekhex_get_symtab): Return long, and -1 on errors. (tekhex_get_symtab_upper_bound): Likewise. (tekhex_get_reloc_upper_bound): Define as bfd_0l. (tekhex_canonicalize_reloc): Likewise. * libaout.h (NAME(aout,get_symtab_upper_bound)): Change declaration to return long. (NAME(aout,get_symtab)): Likewise. (NAME(aout,canonicalize_reloc)): Likewise. (NAME(aout,get_reloc_upper_bound)): Likewise. * libcoff-in.h (coff_get_symtab_upper_bound): Likewise. (coff_get_symtab): Likewise. (coff_get_reloc_upper_bound): Likewise. * libecoff.h (ecoff_get_symtab_upper_bound): Likewise. (ecoff_get_symtab): Likewise. (ecoff_canonicalize_reloc): Likewise. * libelf.h (bfd_elf32_get_symtab_upper_bound): Likewise. (bfd_elf32_get_symtab): Likewise. (bfd_elf32_get_reloc_upper_bound): Likewise. (bfd_elf32_canonicalize_reloc): Likewise. (bfd_elf64_get_symtab_upper_bound): Likewise. (bfd_elf64_get_symtab): Likewise. (bfd_elf64_get_reloc_upper_bound): Likewise. (bfd_elf64_canonicalize_reloc): Likewise. * libnlm.h (nlmNAME(get_symtab_upper_bound)): Likewise. (nlmNAME(get_symtab)): Likewise. (nlmNAME(get_reloc_upper_bound)): Likewise. (nlmNAME(canonicalize_reloc)): Likewise. * archive.c (compute_and_write_armap): Use error_return and no_memory_return labels rather than freeing information in various places. Change storage, symcount and src_count to long. Check errors from bfd_get_symtab_upper_bound and bfd_canonicalize_symtab. * bout.c (b_out_relax_section): Change reloc_size to long. Check for errors from bfd_get_reloc_upper_bound and bfd_canonicalize_reloc. (b_out_get_relocated_section_contents): Likewise. * coff-alpha.c (alpha_ecoff_get_relocated_section_contents): Likewise. * elf32-mips.c: Likewise. * elf32-hppa.c (hppa_elf_stub_finish): Likewise. (hppa_look_for_stubs_in_section): Check for errors from bfd_get_symtab_upper_bound, bfd_canonicalize_symtab, and bfd_canonicalize_reloc. * ecofflink.c (bfd_ecoff_debug_accumulate_other): Check for errors from bfd_get_symtab_upper_bound and bfd_canonicalize_symtab. * linker.c (generic_link_read_symbols): Likewise. (_bfd_generic_final_link): Check for errors from bfd_get_reloc_upper_bound and bfd_canonicalize_reloc. * reloc.c (bfd_generic_get_relocated_section_contents): Likewise. * reloc16.c (bfd_coff_reloc16_relax_section): Likewise. (bfd_coff_reloc16_get_relocated_section_contents): Likewise. * libbfd.c (bfd_0l): New function. * libbfd-in.h (bfd_0l): Declare. * aix386-core.c: Change get_symtab_upper_bound, get_symtab, get_reloc_upper_bound, and canonicalize_reloc to use bfd_0l rather than bfd_0u. * cisco-core.c, hppabsd-core.c, hpux-core.c: Likewise. * irix-core.c, osf-core.c, ptrace-core.c, trad-core.c: Likewise. * bfd-in2.h: Rebuilt. * libbfd.h: Rebuilt. * libcoff.h: Rebuilt. * nlm32-sparc.c (nlm_sparc_read_reloc): Remove unused variables temp and name. Wed Mar 30 08:33:04 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * hosts/dpx2.h: Define POSIX_UTIME. Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * i386dynix.c, config/i386-dynix.mt: New files, handling Dynix variant of a.out. * configure.in, config.bfd: Use them for Dynix. * Makefile.in: Add dependencies for i386dynix.o. * targets.c: Add definition for i386dynix_vec. * hosts/symmetry.h: Do not define TRAD_CORE_USER_OFFSET for Dynix. Define HOST_DATA_START_ADDR and TRAD_UNIX_CORE_FILE_FAILING_SIGNAL for Dynix. Remove inclusion of dynix3.h, Dynix bfd is now handled by i386dynix.c Mon Mar 28 12:53:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * Makefile.in (BFD32_BACKENDS): Add coff-sparc.o. * coffcode.h (coff_set_flags): Handle bfd_arch_powerpc like bfd_arch_rs6000. * config.bfd (powerpc-*-aix*): New target; use rs6000.mt. * config/rs6000.mt (SELECT_ARCHITECTURES): Add bfd_powerpc_arch. * aoutx.h (translate_from_native_sym_flags): Set SEC_RELOC flag for generated constructor section. Sun Mar 27 16:25:22 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * som.c (som_begin_writing): New approach at dealing with holes in executables left by the HP linker. Does not rely on subspace alignments as subspaces are *NOT* guaranteed to be properly aligned in an executable (can you believe that!). Sat Mar 26 10:25:43 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * som.c (som_get_section_contents): New function. Do not try to actually read data from a section that doesn't have either SEC_LOAD or SEC_DEBUGGING set (eg $BSS$) just return true. * libbfd.c (bfd_read): Set bfd_error as appropriate for a short read. (bfd_error_system_call or bfd_error_file_truncated). * som.c: Do not blindly set bfd_error_system_call after a failing bfd_read, bfd_write, or bfd_seek. In a few places (like som_object_p) override the error status set by bfd_read. * aix386-core.c, aout-encap,c archive.c, bout.c: Likewise. * coff-rs6000.c, coffgen.c ecoff.c, elf.c: Likewise. * elf32-hppa.c, elfcode.h, hp300hpux.c, i386lynx.c: Likewise. * nlm32-alpha.c, nlm32-i386.c, nlm32-sparc.c: Likewise. * som.c: Check return values from several bfd_{seek,read,write} calls that we just assumed were not failing. Fri Mar 25 11:44:06 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * hosts/sysv4.h (HAVE_PROCFS): Add comments about ptx4. * config/sysv4.mh: Add comment. * config/symmetry.mh: Change comment. * configure.host: Use sysv4, not symmetry, for i[34]86-sequent-sysv4*. Fri Mar 25 17:10:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) Changes to support linker relaxing of embedded MIPS PIC code to use a five instruction sequence for function calls which are out of range of the bal instruction. * libecoff.h (struct ecoff_section_tdata): Define. (ecoff_section_data): Define. (ecoff_bfd_relax_section): Don't define. * ecoff.c (ecoff_final_link_debug_accumulate): Don't read or free the debugging information if it has already been read. (ecoff_indirect_link_order): Handle _cooked_size being different from _raw_size. Don't reread the contents or the relocs if they have already been read in. * coff-mips.c (mips_howto_table): Change bitsize of PCREL16 from 18 to 16. (PCREL16_EXPANSION_ADJUSTMENT): Define. (mips_relocate_refhi): Take adjust argument. (mips_relocate_section): Handle reloc offsets stored in section used_by_bfd field. Call mips_relax_pcrel16 to handle details of expanding an out of range PCREL16. Keep trace of adjustments required by expansions. Set s and unset h when converting a reloc from undefined to section. Change handling of PC relative relocs: if against a section, they are correct in the object file, if against an external symbol they are pcrel_offset. (mips_relax_section): New function. (mips_relax_pcrel16): New function. (ecoff_bfd_relax_section): Define. * coff-alpha.c (ecoff_bfd_relax_section): Define. * ecofflink.c (bfd_ecoff_debug_accumulate): Handle adjustments built by mips_relax_section when writing out addresses. * elf32-mips.c (mips_elf_read_ecoff_info): Clear adjust field. * aoutx.h (NAME(aout,find_nearest_line)): The caller expects functionname_ptr to be set to a symbol name, so prepend symbol_leading_char. Thu Mar 24 11:33:46 1994 Steve Chamberlain (sac@jonny.cygnus.com) * coff-h8300.c (h8300_reloc16_extra_cases): Add relaxing info for 16bit relative branches. * coff-h8500.c (r_high8, r_low16, r_high16): Don't complain on overflow. Thu Mar 24 09:21:13 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * som.c (som_bfd_prep_for_ar_write): Ignore non-SOM objects. (som_bfd_ar_write_symbol_stuff, som_write_armap): Likewise. Wed Mar 23 14:29:31 1994 David J. Mackenzie (djm@rtl.cygnus.com) * netbsd386.c (N_SET_FLAGS): Delete the old definition. Wed Mar 23 14:58:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) Clean up the relaxing code for the new linker. * targets.c (_bfd_relax_section): Take boolean *again argument rather than asymbol list. * bfd.c (bfd_relax_section): Change name of fourth argument from symbols to again. * reloc.c (bfd_generic_relax_section): Take boolean *again argument rather than asymbol list. Always return true. * bout.c: Include genlink.h. (aligncode, perform_slip): Declare. (perform_slip): Take BFD argument rather than asymbol list. Changed all callers. Get the symbols from the BFD. Change the hash table entry value as well as the symbol value. (abs32code): Take BFD argument rather than asymbol list. Changed all callers. (aligncode): Likewise. (b_out_relax_section): Take boolean *again argument rather than asymbol list. Only return false if an error occurred. Set *again to false. Get symbols from BFD. * reloc16.c: Include genlink.h. (bfd_perform_slip): Take BFD argument rather than asymbol list. Get the symbols from the BFD. Change the hash table entry value as well as the symbol value. (bfd_coff_reloc16_relax_section): Take boolean *again argument rather than asymbol list. Only return false if an error occurred. Set *again to false. Get symbols from BFD. * coffcode.h (bfd_coff_backend_data): Change _bfd_coff_reloc16_estimate to take BFD argument rather than asymbol list. (bfd_coff_reloc16_estimate): Corresponding change. (dummy_reloc16_estimate): Corresponding change. * libcoff-in.h (bfd_coff_reloc16_relax_section): Change declaration to take boolean * rather than asymbol list. (bfd_perform_slip): Change declaration to take BFD rather than asymbol list. * coff-h8300.c (h300_reloc16_estimate): Take BFD argument rather than asymbol list. Changed calls to bfd_perform_slip. * bfd-in2.h: Rebuilt. * libbfd.h: Rebuilt. * libcoff.h: Rebuilt. * Makefile.in: Rebuilt dependencies. * genlink.h (_bfd_generic_link_get_symbols): Define. (_bfd_generic_link_get_symcount): Define. * linker.c (generic_link_read_symbols): New function. (generic_link_add_object_symbols): Use it. Use _bfd_generic_link_get_symbols and _bfd_generic_link_get_symcount to get the symbols from the BFD. (generic_link_check_archive_element): Likewise. (_bfd_generic_final_link): Likewise. (_bfd_generic_link_output_symbols): Likewise. (default_indirect_link_order): Likewise. (generic_link_add_symbol_list): Store pointer to hash table entry in asymbol udata field. Tue Mar 22 13:09:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * coff-mips.c (mips_howto_table): Add entry for new MIPS_R_PCREL16 reloc, used in embedded PIC code. (mips_adjust_reloc_in): Change sanity check to permit new reloc. (mips_bfd_reloc_type_lookup): Turn BFD_RELOC_16_PCREL_S2 into MIPS_R_PCREL16. * elf32-mips.c (mips_elf_final_link): Account for link_order relocs when allocating space for relocations. Set SEC_RELOC flag for any section which has relocs. Handle link_order relocs in link_order loop. Use _bfd_generic_link_add_symbols_collect for add_symbls entry point. * linker.c (_bfd_generic_final_link): Set reloc_count to 0 before counting relocs. Set SEC_RELOC flag for any section which has relocs. * linker.c (_bfd_default_link_order): Handle bfd_data_link_order. * linker.c (_bfd_generic_link_add_symbols): Just call generic_link_add_symbols. (_bfd_generic_link_add_symbols_collect): New function, like _bfd_generic_link_add_symbols but also collect constructors and destructors by name as collect2 does. (generic_link_add_symbols): New function, like old _bfd_generic_link_add_symbols but with collect argument. (generic_link_add_object_symbols): Take collect argument. (generic_link_check_archive_element_no_collect): New function. (generic_link_check_archive_element_collect): New function. (generic_link_check_archive_element): Take collect argument. (generic_link_add_symbol_list): Take collect argument. (_bfd_generic_link_add_one_symbol): Rename constructor argument to collect. * libbfd-in.h (_bfd_generic_link_add_symbols_collect): Declare. * libbfd.h: Rebuilt. Tue Mar 22 10:04:00 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * archive.c (bfd_construct_extended_name_table): Use ar_padchar for first character in an extended name. (_bfd_write_archive_contents): If ar_padchar == '/', then use "//" as the name of the special archive member holding the extended name table. Mon Mar 21 12:28:19 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) Support for link_order types which generate relocs in order to support -Ur in the linker. * linker.c (generic_link_add_symbol_list): Remove bitsize argument from call to _bfd_generic_link_add_one_symbol. (_bfd_generic_link_add_one_symbol): Remove bitsize argument. Don't pass bitsize to constructor call back. Pass BFD_RELOC_CTOR instead of bitsize to add_to_set call back. (_bfd_generic_final_link): Account for link_order relocs when allocating space for relocations. Handle them in link_order loop. (_bfd_generic_reloc_link_order): New function. (_bfd_default_link_order): If a reloc_link_order is seen here, abort. (_bfd_count_link_order_relocs): New function. * libbfd-in.h (_bfd_generic_link_add_one_symbol): Remove bitsize argument from declaration. (_bfd_generic_reloc_link_order): Declare. (_bfd_count_link_order_relocs): Declare. * libbfd.h: Rebuilt. * aoutx.h (aout_link_add_symbols): Remove bitsize argument from call to _bfd_generic_link_add_one_symbol. (NAME(aout,final_link)): Account for link_order relocs when allocating space for relocations. Handle them after handling all input BFDs. (aout_link_reloc_link_order): New function. * ecoff.c (ecoff_link_add_externals): Remove bitsize argument from call to _bfd_generic_link_add_one_symbol. (ecoff_bfd_final_link): Account for link_order relocs when allocating space for relocations. Handle them in link_order loop. (ecoff_link_write_external): Set the storage class of a defined linker created symbol based on the section it is in. Correct bfd_link_hash_weak case to use .sc rather than .st. (ecoff_reloc_link_order): New function. * coff-alpha.c (alpha_bfd_reloc_type_lookup): Handle BFD_RELOC_CTOR. * coff-mips.c (mips_bfd_reloc_type_lookup): Likewise. * sunos.c (sunos_read_dynamic_info): Remove unused locals dynsym and buf. * cisco-core.c (cisco_core_file_p): Only pass one argument to bfd_zmalloc. Free a pointer, not a union. (cisco_bfd_is_local_label): Correct cast from asection to asymbol. Sun Mar 20 09:24:36 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * bfd/som.c (som_begin_writing): Fix thinko (off by one error). * som.c (bfd_section_from_som_symbol): Only to do the value comparison for function symbols within executables. * som.c (bfd_section_from_som_symbol): Renamed from som_section_from_subspace_index. Pass in a native SOM symbol. For executables, iterate through the sections to find out which contains the symbol's address rather than using the symbol_info field. (symbol_info has a different meaning for dynamicly linked executables.) * trad-core.c (trad_unix_core_file_p): Don't pass abfd to bfd_zmalloc. * som.c (som_begin_writing): Fix braino (one call to align space/subspace data was done unconditionally rather than just for executables.) * som.c (som_begin_writing): Align text in all executables to make HPUX kernel happy. Fixes strip/objcopy for shared executables. Sat Mar 19 07:06:59 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * som.c (som_begin_writing): Account for alignment needs of subspaces too when writing executables. Never request a negative bss size. Fixes some problems with demand paged executables, still having problems with pure executables and shared executables. Fri Mar 18 19:12:47 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * trad-core.c (trad_unix_core_file_p): Call bfd_zmalloc not bfd_zalloc for rawptr, because later on we may call free, not bfd_release, on it. * bfd.c (struct _bfd): Add cisco_core_struct to tdata union. * libbfd.c (bfd_read, bfd_seek): Add comments regarding errors. * cisco-core.c: New file. * Makefile.in: Change accordingly. * configure.in: Recognize cisco_core_vec. * config/m68k-aout.mt (SELECT_VECS): Add cisco_core_vec. * targets.c: Add cisco_core_vec. * bfd-in2.h: Rebuilt. Fri Mar 18 18:13:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * som.h (som_copyable_section_data_struct): New structure containing all the private section information which needs to be copied from input section to output section during objcopy or strip. (som_section_data_struct): Remove several fields now in som_copyable_section_data_struct. Make the space and subspace dictionaries be pointers (to save space when only reading objects). * som.c (bfd_som_set_section_attributes): Now returns a boolean; some references changed. Allocate a copyable data stucture if none exists. Store info into the copyable data structure. (bfd_som_set_subsection_attributes): Likewise. (som_is_space, som_is_subspace, som_is_container): New functions. Use these instead of directly accessing private data. (som_prep_headers): Allocate space and subspace headers here. Fill in some fields in the space/subspace headers from the copyable data. (som_bfd_copy_private_section_data): Only copy the stuff that we really need to make objcopy and strip work. Allocate the copy_data structure for the output bfd before copying. * som.h (struct som_exec_data): New structure to hold exec info that must be preserved when running objcopy/strip. (struct somdata): Add new "exec_data" field and accessor macro. Add some comments on how the various fields are used. (som_section_data_struct): Make is_space and is_subspace bitfields. Delete unused subspace_index. All references now use the target_index field within the section structure itself. * som.c (make_unique_section): Delete unused declaration. (som_bfd_copy_private_bfd_data): New function. (som_object_setup): Allocate space for and save exec information that needs to be copied during objcopy/strip. (som_mkobject): Do not allocate space for a file header here. It is not used when only reading SOM objects. (som_prep_headers): Allocate space for and attach a file header to the output bfd. For executables, use the saved system_id value rather than trying to guess the right value. Do not abort wwhen setting file_hdr->entry* for executables. (som_begin_writing): For executables, set the exec_entry and exec_flags fields. (som_copy_private_backend_section_data): Always return a value. * libhppa.h (PA_PAGESIZE): Define. * som.c (SOM_ALIGN): Define. (som_begin_writing): If writing an executable, initialize all fields in the exec header to zero. Update fields in the exec header as sizes of loadable subspaces are computed. Carefully preserve alignments when building executables. Actually write the exec after all the fields are filled in. * Better long-filename handling. Reads SOM ABI compliant extended names, but doesn't quite write compliant extended names yet. * som.c (som_slurp_extended_name_table): Delete function. The generic code will handle things correctly. (som_slurp_armap): Seek to the beginning of the next member. (normalize): New function. (som_bfd_ar_write_symbol_stuff): Take the size of the extended name table into account when computing the file offsets in the SOM dictionary. Make sure to align to an even boundary. (som_write_armap): Initialize the checksum to zero. (ar_maxchars): Fix. Opps. Fri Mar 18 20:35:24 1994 Ken Raeburn (raeburn@cujo.cygnus.com) * aoutx.h (reloc_type_lookup): Handle BFD_RELOC_CTOR on a 64-bit machine. Handle BFD_RELOC_SPARC13 and BFD_RELOC_SPARC_BASE13. Thu Mar 17 18:26:46 1994 Ken Raeburn (raeburn@cujo.cygnus.com) * bfd-in.h (BFD_VERSION): Use @VERSION@. * Makefile.in (bfd.h): Replace it with contents of VERSION file. * bfd-in2.h: Regenerated. * trad-core.c (trad_unix_bfd_is_local_label): Fixed typo where this was also named trad_unix_bfd_copy_private_bfd_data. Thu Mar 17 10:37:07 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * aoutx.h, elfcode.h, coff-alpha.c, bout.c, ecoff.c, ecofflink.c, elf32-hppa.c, elf32-mips.c, linker.c, som.c, sunos.c: If malloc(0) returns NULL, it is not an error. It's possible that some of these checks are not necessary (because the size can never be zero), but putting in the checks is the conservative thing to do in light of the fact that some of these malloc calls replaced unchecked alloca calls, in which a zero argument would work fine. Thu Mar 17 11:44:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * osf-core.c (osf_core_bfd_copy_private_bfd_data): Remove duplicate definition. (osf_core_bfd_is_local_label): Define. * reloc.c (bfd_generic_get_relocated_section_contents): Don't fail if malloc (0) fails. bfd_canonicalize_reloc returning 0 is not a failure indication, it merely means there are no relocs. * elfcode.h (NAME(bfd_elf,write_object_contents)): Don't use space after NAME, since SunOS /bin/cc can't handle it. Wed Mar 16 16:43:33 1994 David J. Mackenzie (djm@thepub.cygnus.com) * netbsd386.c (N_SET_FLAGS): Don't nuke the machine id field. From sukes@glue.umd.edu (Tasuki Hirata). Wed Mar 16 07:55:54 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * aoutf1.h (4 places): Use a simple #if on ARCH_SIZE, rather than all that convoluted stuff with NAME, CAT3, etc. The convoluted stuff broke for SunOS4 /bin/cc (due to DEFUN elimination, I guess). Wed Mar 16 00:02:05 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * som.c (som_prep_for_fixups): Detect section symbols based on either the lack of private data or the symbol flags. Do not munge section symbol names anymore -- they no longer confuse GDB. (som_begin_writing): Leave space for an exec header if writing an executable. (som_slurp_symbol_table): Recognize both forms of section symbol names "L$0\002" and "$$". Change the name of "L$0\002" section symbols to be the name of the section they represent. Debugging symbols begin with "L$0\001", not just "L$". Tue Mar 15 22:58:28 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * bfd-in2.h, libbfd.h, libcoff.h: Rebuilt. * bfd-in.h (JUMP_TABLE): Add new entries to the jump table for bfd_copy_private_section_data, bfd_copy_private_bfd_data, and bfd_is_local_label. * targets.c: Add new entries to the bfd_target structure. * bfd.c (bfd_copy_private_bfd_data): New definition. * section.c (bfd_copy_private_section_data): New definition. * syms.c (bfd_is_local_label): New definition. * libbfd-in.h (bfd_generic_is_local_label): Declare. * libbfd.c (bfd_generic_is_local_label): New function. * *-core.c: Provide default definitions for new functions in the target vector which all point to bfd_false. * aout-target.h, coffcode.h, elf32-target.h elf64-target.h, ieee.c libaout.h, libecoff.h, nlm-target.h, oasys.c, srec.c, tekhex.c Default new vectors for copying private backend data to bfd_true. Default new vector for determining if a symbol is a local label to bfd_generic_is_local_label. * som.c (som_bfd_copy_private_section_data): New function. (som_bfd_is_local_label): New function. (som_bfd_copy_private_bfd_data): For now default to bfd_true. * elf32-hppa.c (hppa_elf_is_local_label): New function. Tue Mar 15 23:55:47 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * cf-m68klynx.c (CALC_ADDEND): Use _bfd_m68klynx_howto_table. Tue Mar 15 04:41:13 1994 David J. Mackenzie (djm@rtl.cygnus.com) * Most files: Replace DEFUN and DEFUN_VOID with K&R-style function definition. Indent some of them to GNU standards. * aout32.c, archures.c, core.c, cpu-h8300.c, cpu-i960.c, cpu-m68k.c, cpu-m88k.c, cpu-mips.c, cpu-vax.c, ctor.c, demo64.c, elf32-hppa.h, gen-aout.c, host-aout.c, init.c, libhppa.h, libieee.h, liboasys.h, newsos3.c, som.h, stab-syms.c, sunos.c: Update copyright years. Mon Mar 14 11:41:23 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * som.c (som_prep_for_fixups): A relocation involving the section symbol for the *ABS* section is really a relocation involving no symbol. (som_slurp_symbol_table): Do not set BSF_GLOBAL or BSF_EXPORT for undefined symbols. Correctly distinguish between debugger symbols and section symbols. * som (setup_sections): Set SEC_DEBUGGING and the section attributes for spaces and subspaces. * som.c (som_bfd_count_ar_symbols): Fix typo. * som.c (som_object_setup): Set EXEC_P, D_PAGED, WP_TEXT, and HAS_RELOC based on the object's magic number. (make_unique_section): Delete function. BFD and its users are prepared to handle multiple sections with the same name. (setup_sections): Allocate space on the BFD's obstack to hold section names. Use bfd_make_setion_anyway rather than the obsolete make_unique_section. (som_prep_headers): Choose the correct SOM magic number based on the BFD's flags. (som_bfd_fill_in_ar_symbols): Return false, not NULL on error. Sat Mar 12 09:46:09 1994 Ian Lance Taylor (ian@cygnus.com) * elf32-ppc.c: Renamed from elf32-powerpc.c. * nlm32-ppc.c: Renamed from nlm32-powerpc.c. * Makefile.in, configure.in: Corresponding changes. Fri Mar 11 22:27:19 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * elf32-powerpc.c: Extensive changes to update to preliminary ABI. Fri Mar 11 00:34:59 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * sunos.c (sunos_read_dynamic_info): Assume that dynamic info is always located at the start of the data section to allow recovery of the dynamic info from a stripped executable. * ecoff.c (ecoff_styp_to_sec_flags): Handle STYP_PDATA, STYP_XDATA and STYP_COMMENT. Wed Mar 9 17:17:53 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * libbfd-in.h: Remove alloca cruft. It was missing some necessary cruft (like the #pragma alloca for AIX). In addition to that problem, the C alloca calls xmalloc, which means checking for being out of memory can't work right. The following changes remove all uses of alloca from BFD. * hosts/solaris2.h: Remove alloca cruft. * som.c: Replace alloca with a fixed size auto array. * aoutx.h, elfcode.h, nlmcode.h, bout.c, coff-alpha.c, ecoff.c, ecofflink.c, elf32-hppa.c, elf32-mips.c, linker.c, reloc.c, som.c, sunos.c: Replace alloca with malloc and appropriate error checking and freeing. * linker.c: Replace alloca with obstack_alloc. * libbfd.h: Rebuilt. Tue Mar 8 12:10:38 1994 Ian Lance Taylor (ian@cygnus.com) * coff-mips.c (mips_relocate_section): Handle MIPS_R_LITERAL like MIPS_R_GPREL. Sat Mar 5 14:08:54 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * elf32-hppa.h, elfcode.h: Replace uses of Elf*_Half, Elf*_Word, Elf*_Off typedefs by their expansion, the typedefs have been removed from include/elf/internal.h. * elfcode.h (bfd_section_from_shdr): Handle SHT_DYNAMIC section like SHT_PROGBITS section. Thu Mar 3 20:03:39 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * som.h (_PA_RISC_ID): Treat HOST_HPPAOSF just like HOST_HPPABSD. Wed Mar 2 13:28:06 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * configure.host: Recognize i[34]86-sequent-*. * trad-core.c (trad_unix_core_file_p): A non-zero, not zero, return from bfd_seek indicates an error. New macro TRAD_CORE_DSIZE_INCLUDES_TSIZE to replace TRAD_CORE_STACK_OFFSET. * hosts/symmetry.h: Define TRAD_CORE_DSIZE_INCLUDES_TSIZE and TRAD_CORE_USER_OFFSET but not HOST_STACK_OFFSET. Wed Mar 2 11:57:03 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * som.[ch]: Do not include libhppa.h in som.c, instead include it in som.h. * elf32-hppa.[ch]: Do not include libhppa.h in elf32-hppa.c, instead include it in elf32-hppa.h. * som.c (log2): Return -1 on error rather than aborting. (setup_sections): Bubble up an error from log2. * Changes to make HP C compiler happy in both traditional and ANSI mode. * som.c (hppa_som_gen_reloc_type): Use correct enum type for field parameter. (bfd_som_set_section_attributes): Use unsigned int rather than unsigned char to avoid GNU-C extensions. (bfd_som_attach_aux_hdr): Return a boolean to indicate success or failure rather than aborting on failure. * som.h (bfd_som_set_section_attributes): Fix prototype to match som.c changes. (bfd_som_attach_aux_hdr): Add prototype. (hppa_som-gen_reloc_type): Likewise. * elf32-hppa.c: Add a couple casts to make HP compiler happy. (hppa_look_for_stubs_in_section): Do not return false on failure until rest of code is ready to handle it. Abort for now. Tue Mar 1 18:33:59 1994 Jim Kingdon (kingdon@deneb.cygnus.com) * bfd-in2.h: Rebuilt. Tue Mar 1 13:06:53 1994 Kung Hsu (kung@mexican.cygnus.com) * i386os9k.c: use new functions bfd_set_error and bfd_get_error. * Makefile.in: delete an extra blank. * configure.in : Add i396os9k_vec. Mon Feb 28 15:41:01 1994 Kung Hsu (kung@mexican.cygnus.com) * config.bfd : Add i386-os9k. * config/i386-os9k.mt : Newly add os9k target makefile. * i386os9k.c : new file to handle os9k format bfd. * Makefile.in : Handle new file i386os9k.c * targets.c : Add bfd_target_os9k_flavour and i386os9k_vec. * cache.c : Initialize cache_sentinel to 0. Sun Feb 27 16:30:55 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * elf32-hppa.c (mismatches, retval_mismatches): Fix mismatch action in case where caller specified no argument relocation. (hppa_elf_build_linker_stub): Try again to get the sym_ptr_ptr right in the original relocation and the stub's relocation. * elf32-hppa.h (hppa_look_for_stub_in_section): Fix typo. Delete unused symbols argument. * elf32-hppa.c (hppa_elf_stub_reloc): Accept asymbol ** rather than asymbol * for original target symbol. All callers changed. Set reloc->sym_ptr_ptr appropriately. (hppa_elf_build_linker_stub): Set reloc->sym_ptr_ptr correctly. (hppa_elf_look_for_stubs_in_section): No longer need symbols argument. Use the output symbols when canonicalizing the relocs, creating them if necessary. * linker.c (_bfd_generic_link_output_symbols): Do not rebuild/clobber the output symbols if they already exist. Sun Feb 27 15:22:36 1994 Stan Shebs (shebs@andros.cygnus.com) * targets.c (BFD_SEND, BFD_SEND_FMT): Add debugging versions that check all the pointer dereferences. Enabled via DEBUG_BFD_SEND. * bfd-in2.h: Rebuilt. * srec.c (hex_value): Always set to a size of 256 bytes. (srec_init): Cosmetic changes. Sun Feb 27 11:18:47 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * elf32-hppa.c: Second half of major cleanup. More comments, PARAMize and staticize rest of functions. Delete unused functions. Delete unused/unnecessary arguments to some functions. Group static vars together. Abort for bad errors until we have error code propogation working. Work on spacing and indention. Add FIXMEs for unresolved problems. Use enums rather than #defines for lots of things. Merge two functions which build linker stubs into a single function (so they can easily share a ton of common code). Sat Feb 26 10:00:45 1994 Ian Lance Taylor (ian@cygnus.com) * reloc.c (_bfd_relocate_contents): Adjust handling of overflow to avoid depending upon right shifts of signed numbers, and to correct handling of src_mask with lower bits zero. * aoutx.h, archive.c: Add casts to avoid warnings from SVR4 cc. * ecoff.c, ecofflink.c, ecoffswap.h, srec.c: Likewise. * elf32-i386.c: Likewise. * elfcode.h (bfd_section_from_shdr): Make i unsigned; remove old #if 0 code. (elf_write_phdrs): Make i unsigned. (map_program_segments): Make i and n_left unsigned. (assign_file_positions_except_relocs): Make i unsigned. (write_shdrs_and_ehdr): Make count unsigned. (assign_file_positions_for_relocs): Make i unsigned. (NAME(bfd,elf_write_object_contents)): Make count unsigned. (section_from_elf_index): Make index argument unsigned. Fri Feb 25 21:34:58 1994 Ian Lance Taylor (ian@cygnus.com) * elfcode.h: Don't include assert.h. (swap_out_syms): Use BFD_ASSERT rather than assert. * linker.c (_bfd_generic_link_write_global_symbol): Add missing break in switch. * hosts/i386v4.h (qsort, strtol): Remove incorrect and useless declarations. Fri Feb 25 16:35:57 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * libhppa.h (hppa_rebuild_insn): Moved here from elf32-hppa.c. * elf32-hppa.h (elf_hppa_tc_symbol): Add new arguments. (elf_hppa_tc_make_sections): Likewise. (elf_hppa_final_processing): Add extern decl. * elf32-hppa.c: First half of major cleanup. Add/cleanup lots of comments. PARAMize some static functions. Delete unused functions. Delete unused/unnecessary arguments to many functions. Group static vars together. Collapse common case statements together in many places. Use default case when possible instead of listing each case separately. Abort for bad errors until we get error code propogation working. Work on spacing and indention problems. Add FIXMEs for some unresolved problems. Delete hopelessly broken COMPLEX relocation support (it's never used anyway). (hppa_elf_rebuild_insn): Delete. Moved into libhppa.h. (elf_hppa_tc_symbol): Accept and use new arguments (symext chains). (elf_hppa_tc_make_sections): Likewise. * format.c (bfd_check_format_matches): Initialize matching_vector to keep gcc -Wall quiet. * elfcode.h (elf_slurp_reloca_table): Fix typo. * som.c (som_get_symtab_upper_bound): Use "sizeof (asymbol *)" not "sizeof (som_symbol_type *)". * elfcode.h (elf_get_symtab_upper_bound): Use "sizeof (asymbol *)" not "sizeof (asymbol"). Opps. Fri Feb 25 13:19:04 1994 Ted Lemon (mellon@pepper.ncd.com) * bfd.c (bfd_get_gp_size): Can't return gp value on an archive. (bfd_set_gp_size): Can't set gp value on an archive. Fri Feb 25 12:57:00 1994 Steve Chamberlain (sac@jonny.cygnus.com) * srec.c (pass_over): Don't skip too many characters when end of line seen. Fri Feb 25 11:41:57 1994 Ian Lance Taylor (ian@cygnus.com) * ecoff.c (ecoff_sizeof_headers): Align result to 16 byte boundary. Thu Feb 24 07:13:22 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * som.c (som_bfd_derive_misc_symbol_info): Derive symbol_info field for absolute symbols in the same manner as undefined and common symbols. Thu Feb 24 04:29:19 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * elfcode.h (elf_core_file_p): Check for core file e_machine match like in elf_object_p. Wed Feb 23 18:28:37 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * elfcode.h (alloca): Delete declaration. * som.c (som_prep_headers): Use CPU_PA_RISC1_0 for magic number rather than HP9000S800_ID. Note som.c is careful to make sure CPU_PA_RISC1_0 is always defined. Mon Feb 21 10:12:02 1994 Stan Shebs (shebs@andros.cygnus.com) * Makefile.in (targets.o, archures.o): Use ALL_CFLAGS to supply flags to explicit compile actions. Mon Feb 21 09:50:06 1994 Ian Lance Taylor (ian@lisa.cygnus.com) * ecofflink.c (ecoff_write_symhdr): Set symhdr->magic here. * ecoff.c (ecoff_write_object_contents): Make sure .bss section ends on a page boundary if there is no symbol table. (ecoff_bfd_final_link): Don't set symhdr->magic here. * hosts/hp300.h: Include ; don't declare free. * som.c (som_bfd_count_ar_symbols): Use a pointer and alloca rather than an array of variable size. (som_bfd_fill_in_ar_symbols): Likewise. (som_bfd_ar_write_symbol_stuff): Likewise. * coff-alpha.c (alpha_relocate_section): Rewrite mask and shift operation to avoid OSF 1.3 cc bug. * ecoff.c (ecoff_write_object_contents): Make text_size, data_size and bss_size bfd_size_type instead of unsigned long. Make text_start and data_start bfd_vma instead of unsigned long. * ecofflink.c (ecoff_add_string): Remove incorrect cast of return value. Sun Feb 20 16:06:54 1994 Ian Lance Taylor (ian@lisa.cygnus.com) * linker.c (_bfd_generic_link_add_archive_symbols): Consider symbols in the order they appear in the archive map. Sat Feb 19 03:17:32 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * coff-alpha.c (reloc_nil): Add forward declaration, add missing error_message argument. * coff-sparc.c (bfd_coff_generic_reloc): Add forward declaration, add missing error_message argument. * mipsbsd.c (mips_fix_hi16_s): Add forward declaration, add missing error_message argument. Fri Feb 18 11:41:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) Support for PowerPC NetWare. * nlm32-powerpc.c: New file. * config.bfd (powerpc-*-netware*): New target; use ppc-nlm. * config/ppc-nlm.mt: New file. * configure.in (nlm32_powerpc_vec): New target vector; use nlm32-powerpc.o, nlm32.o, nlm.o. * targets.c (nlm32_powerpc_vec): Declare. * Makefile.in (BFD32_BACKENDS): Add nlm32-powerpc.o. (CFILES): Add nlm32-powerpc.c. Initial support for PowerPC ELF. Done without an ABI, and probably to be changed when I get an ABI. * config.bfd (powerpc-*-sysv4*): New target; use ppc-elf. * config/ppc-elf.mt: New file. * configure.in (bfd_elf32_powerpc_vec): New target vector; use elf32-powerpc.o, elf32.o, elf.o. * elf32-powerpc.c: New file. * elfcode.h (prep_headers): Add bfd_arch_powerpc case. (elf_set_arch_mach): Likewise. * targets.c (bfd_elf32_powerpc_vec): Declare. * Makefile.in (BFD32_BACKENDS): Add elf32-powerpc.o. (CFILES): Add elf32-powerpc.c. Rebuilt dependencies. Thu Feb 17 15:29:55 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * coffgen.c (coff_write_linenumbers): Always return a value. * elfcode.h (elf_slurp_symbol_table): Handle zero symbols reasonably. Allocate x_symp using alloca. * elfcode.h (map_program_segments): ELF program header entries must be sorted by load address. This used to generate the entries in reverse order. * section.c (SEC_IN_MEMORY): Define. (asection): Rename unused field otheruserdata to contents, and make it char *. (bfd_make_section_anyway): Initialize contents field to NULL. (bfd_get_section_contents): If SEC_IN_MEMORY is set, get section contents from contents field rather than from file. * bfd-in2.h: Rebuilt. Thu Feb 17 08:30:53 1994 David J. Mackenzie (djm@thepub.cygnus.com) * bfd.c (bfd_get_error, bfd_set_error): New functions. (bfd_error): Make static. (bfd_error_type): Renamed from bfd_ec. Prepend "bfd_error_" to all values. * bfd-in2.h: Regenerated. * aix386-core.c, aout-adobe.c, aout-encap.c, aout-target.h, aoutf1.h, aoutx.h, archive.c, archures.c, bfd.c, bout.c, cache.c, coff-alpha.c, coff-mips.c, coff-rs6000.c, coffcode.h, coffgen.c, core.c, ctor.c, ecoff.c, ecofflink.c, elf.c, elf32-hppa.c, elf32-mips.c, elfcode.h, format.c, hash.c, hp300hpux.c, hppabsd-core.c, i386lynx.c, ieee.c, libbfd.c, libelf.h, linker.c, lynx-core.c, nlm.c, nlm32-alpha.c, nlm32-i386.c, nlm32-sparc.c, nlmcode.h, oasys.c, opncls.c, osf-core.c, ptrace-core.c, reloc16.c, rs6000-core.c, section.c, som.c, srec.c, sunos.c, syms.c, targets.c, tekhex.c, trad-core.c: Change callers. Tue Feb 15 22:27:27 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * som.c: Remove FIXMEs for things which have been dealt with. Tue Feb 15 19:39:24 1994 Ken Raeburn (raeburn@cujo.cygnus.com) * section.c (bfd_get_section_contents): Since this function reads unrelocated contents, the section's raw size is always the one to use for bounds checking. * linker.c (default_indirect_link_order): In assertion, compare link_order size field against cooked size, not raw size, of input section. * bout.c (b_out_get_reloc_upper_bound): For BSS section, just return 0. (aligncode): When shrinking, the addend should be set to the current offset in the section plus the number of bytes of padding that will actually be retained. (b_out_relax_section): If a section contains no relocations, don't bother processing them. (b_out_get_relocated_section_contents): Set reloc_done. Assert that bfd_get_section_contents returns true. Check that relocs are properly ordered. (b_out_get_relocated_section_contents, case ALIGNDONE): Assert that reloc->addend falls between the current source offset and the raw size of the input section. * config.bfd: Support i960 vxworks versions > 5.0 with coff, not bout. Default with no version number is still bout. Support explicit i960-coff target too. * bout.c: Changed some indentation, deleted trailing whitespace, fixed some comments, removed some "#if 1" lines. (output_addr): New macro. (calljx_callback, callj_callback, get_value, abs32code, aligncode, b_out_get_relocated_section_contents): Use it for readability. Tue Feb 15 09:00:16 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * som.c (som_bfd_prep_for_ar_write): Iterate through the SOM symbols, not the BFD symbols. (som_bfd_ar_write_symbol_stuff): Likewise. Mon Feb 14 22:55:20 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * som.c (som_slurp_symbol_table): Do not die if a BFD doesn't have any symbols. * Finish basic read-write support for SOM archive libraries. Bugs surely remain as this hasn't been tested all that much. * som.c (SOM_LST_HASH_SIZE, SOM_LST_MODULE_LIMIT): Define. (struct som_misc_symbol_info): New structure to hold info necessary to build both normal and library symbol tables. (som_derive_misc_symbol_info): New function to derive info necessary to build both normal and library symbol tables. (som_build_and_write_symbol_table): Use new function to derive misc symbol information. (som_slurp_symbol_table): Update backend private data for symbols appropriately. (som_bfd_prep_for_ar_write): New function. (som_bfd_ar_symbol_hash): New function. (som_bfd_ar_write_symbol_stuff): New function. (som_write_armap): Flesh out. (som_vec): Fix ar padding character. * som.c: Consistently use memset rather than bzero. Mon Feb 14 17:02:28 1994 Stu Grossman (grossman at cygnus.com) * coff-rs6000.c: Add Lynx core file support, use HOST_AIX, where appropriate. * rs6000-core.c: Use HOST_AIX instead of COREFILES_PLEASE. * config/rs6000.mh: Remove defs of ARCHIVES_PLEASE and COREFILES_PLEASE. * config/rs6000lynx.mh: Turn on Lynx core file support. * hosts/rs6000.h: #define HOST_AIX. * hosts/rs6000lynx.h: Create this to enable Lynx host support. Sun Feb 13 14:30:00 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * som.h (som_symbol_data): Safely access backend private data for BFD symbols. All callers changed. * Read-only SOM archive support. * som.c (som_bfd_count_ar_symbols): New helper function. (som_bfd_fill_in_ar_symbols): New helper function. (som_slurp_armap): New function to read a SOM LST. * som.h: Include and . Sat Feb 12 22:34:14 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * elfcode.h (elf_map_symbols): Fix typo. (write_object_contents): Check return values from prep_headers and elf_compute_section_file_positions. (set_section_contents): Likewise. Fri Feb 11 16:56:50 1994 David J. Mackenzie (djm@thepub.cygnus.com) * archive.c (normalize) [VMS]: Call malloc, not bfd_xmalloc. (bfd_construct_extended_name_table): Check result of normalize. Tue Feb 8 08:57:31 1994 David J. Mackenzie (djm@thepub.cygnus.com) Make all callers of malloc or realloc (including via obstacks) check the result for NULL. Most set bfd_error to no_memory and return in that case; a few are harder to fix, and are marked with "FIXME ". * elf32-hppa.c (hppa_elf_build_arg_reloc_stub hppa_elf_build_long_branch_stub): Check bfd_make_empty_symbol return. * linker.c (_bfd_generic_link_output_symbols _bfd_generic_link_write_global_symbol): Ditto * section.c (bfd_make_section_anyway): Ditto. * tekhex.c (find_chunk tekhex_mkobject): Check bfd_alloc. (first_phase): Ditto. FIXME void (tekhex_make_empty_symbol): Check bfd_zalloc. * sunos.c (sunos_read_dynamic_info): Check bfd_zalloc. (MY(read_dynamic_symbols) MY(read_dynamic_relocs)): Check bfd_alloc. * stringhash.c (_bfd_stringtab_hash_newfunc): Check bfd_hash_allocate. * srec.c: Indent. (fillup_symbols): Check bfd_alloc. FIXME void (srec_mkobject srec_get_section_contents srec_set_section_contents): Check bfd_alloc. (srec_make_empty_symbol): Check bfd_zalloc. * som.c (hppa_som_gen_reloc_type): Check bfd_alloc_by_size_t. (make_unique_section): Check bfd_alloc. (som_new_section_hook): Check bfd_zalloc. (bfd_som_attach_aux_hdr): Ditto. FIXME void * rs6000-core.c (rs6000coff_core_p): Check bfd_zalloc. * osf-core.c (osf_core_make_empty_symbol): Check bfd_zalloc. (osf_core_core_file_p): Check bfd_alloc. * oasys.c (oasys_slurp_symbol_table oasys_archive_p oasys_mkobject oasys_object_p oasys_new_section_hook oasys_set_section_contents): Check bfd_alloc. (oasys_slurp_section_data): Check bfd_zalloc and bfd_alloc. (oasys_make_empty_symbol): Check bfd_zalloc. * nlmcode.h (nlm_make_empty_symbol): Check bfd_zalloc. (nlm_slurp_symbol_table): Check bfd_zalloc and bfd_alloc. * nlm32-sparc.c (nlm_sparc_read_import): Check bfd_alloc. * nlm32-i386.c (nlm_i386_read_import): Check bfd_alloc. * nlm32-alpha.c (nlm_alpha_read_import): Check bfd_alloc. * linker.c (_bfd_link_hash_newfunc (generic_link_hash_newfunc (archive_hash_newfunc (_bfd_generic_link_add_one_symbol): Check bfd_hash_allocate. (_bfd_generic_final_link (_bfd_generic_link_output_symbols (default_indirect_link_order): Check bfd_alloc. (bfd_new_link_order): Check bfd_alloc_by_size_t. * irix-core.c (irix_core_make_empty_symbol): Check bfd_zalloc. * ieee.c: Indent. (read_id get_symbol get_section_entry ieee_archive_p ieee_object_p ieee_slurp_section_data ieee_new_section_hook): Check bfd_alloc. (do_one): Check bfd_alloc. Return a boolean. (ieee_slurp_section_data): Check it. (init_for_output): Check bfd_alloc. Return a boolean. (ieee_set_section_contents): Check it. (do_with_relocs): Check bfd_alloc. Return a boolean. (ieee_bfd_debug_info_accumulate): Ditto. FIXME void. (ieee_mkobject): Check bfd_zalloc. (ieee_make_empty_symbol): Check bfd_zmalloc. * hpux-core.c (hpux_core_make_empty_symbol): Check bfd_zalloc. * hppabsd-core.c (hppabsd_core_make_empty_symbol): Check bfd_zalloc. (hppabsd_core_core_file_p): Check bfd_zalloc. * hp300hpux.c (MY(slurp_symbol_table)): Check bfd_alloc. * elfcode.h (elf_new_section_hook): Check bfd_alloc. (bfd_section_from_phdr): Ditto. (write_relocs): Ditto. FIXME void (elf_map_symbols assign_section_numbers map_program_segments): Ditto. Return a boolean. (swap_out_syms): Ditto. Check elf_map_symbols. (elf_slurp_symbol_table): Check bfd_zalloc. (elf_slurp_reloca_table): Check bfd_alloc. (elf_slurp_reloc_table): Ditto. (elf_compute_section_file_positions): Check assign_section_numbers. (assign_file_positions_except_relocs): Return a boolean. Check map_program_segments. (elf_compute_section_file_positions): Check it. * elf32-mips.c (mips_elf_final_link): Check bfd_alloc. * elf32-hppa.c (hppa_elf_stub_branch_reloc): Check bfd_zmalloc and realloc. (hppa_elf_stub_reloc): Ditto. (hppa_elf_build_arg_reloc_stub): Check bfd_zalloc. (hppa_elf_build_long_branch_stub): Ditto. (elf32_hppa_backend_symbol_table_processing): Ditto. * ecoff.c (ecoff_set_symbol_info): Check bfd_alloc. Return a boolean. (ecoff_slurp_symbol_table): Check it. (ecoff_slurp_armap): Check bfd_alloc. (ecoff_write_armap): Check bfd_zalloc. (ecoff_link_hash_newfunc): Check bfd_hash_allocate and _bfd_link_hash_newfunc. (ecoff_link_add_externals): Check bfd_alloc. * ctor.c (bfd_constructor_entry): Check bfd_alloc. * coffgen.c (coff_real_object_p): Check bfd_alloc. (coff_renumber_symbols): Check bfd_alloc_by_size_t. Return a boolean. (coff_write_symbol): Check bfd_alloc. FIXME int (coff_write_linenumbers): Check bfd_alloc. Return a boolean. (coff_section_symbol): Check bfd_alloc_by_size_t. (coff_get_normalized_symtab): Check bfd_alloc. (coff_bfd_make_debug_symbol): Check bfd_zalloc. * libcoff-in.h: Change decls of coff_renumber_symbols, coff_write_linenumbers. * libcoff.h: Rebuilt. * coffcode.h (coff_write_object_contents): Check coff_renumber_symbols, coff_write_linenumbers. * coffcode.h: Indent. (coff_add_missing_symbols): Check bfd_alloc_by_size_t. Return a boolean. (coff_write_object_contents): Check it. * coff-alpha.c (alpha_relocate_section): Check bfd_alloc. * coff-mips.c (mips_relocate_section): Ditto. * archive.c (bfd_slurp_bsd_armap_f2): Check bfd_alloc value. (do_slurp_bsd_armap): Ditto. (compute_and_write_armap): Check bfd_realloc value. * aoutx.h (translate_from_native_sym_flags): Check bfd_alloc return value. Return boolean value. (NAME(aout,make_empty_symbol)): Check bfd_zalloc return value. (NAME(aout,slurp_symbol_table)): Check bf_alloc and bfd_zalloc return value. (add_to_stringtab): Ditto. FIXME void (aout_link_hash_newfunc): Check bfd_hash_allocate return value. (aout_link_add_symbols): Check bfd_alloc value. (translate_symbol_table): Check translate_from_native_sym_flags. * hp300hpux.c (MY(slurp_symbol_table)): Ditto. * aoutx.h (aout_link_hash_newfunc): Check _bfd_link_hash_newfunc. * opncls.c (bfd_zalloc bfd_realloc): Check result of bfd_alloc. * opncls.c (obstack_chunk_alloc): Define as malloc, not bfd_xmalloc_by_size_t. (_bfd_new_bfd): Check obstack_begin for 0 return. * ieee.c (obstack_chunk_alloc): Define as malloc, not bfd_xmalloc_by_size_t. (ieee_archive_p): Check obstack_begin for 0 return and obstack_finish for NULL return. * hash.c (obstack_chunk_alloc): Define as malloc, not bfd_xmalloc_by_size_t. (bfd_hash_table_init_n): Check obstack_begin for 0 return and obstack_finish for NULL return. (bfd_hash_lookup): Check obstack_alloc for NULL return. * ecofflink.c (obstack_chunk_alloc): Define as malloc, not bfd_xmalloc_by_size_t. bfd_ecoff_debug_accumulate bfd_ecoff_debug_accumulate_other): Check obstack_alloc. (add_file_shuffle add_memory_shuffle): Check obstack_alloc for NULL return. Return boolean, not void. (bfd_ecoff_debug_init): Check obstack_begin for 0 return. (bfd_ecoff_debug_accumulate): Check add_file_shuffle and add_memory_shuffle return. (string_hash_newfunc): Check bfd_hash_allocate and bfd_hash_newfunc. (bfd_ecoff_debug_accumulate): Check bfd_alloc. (ecoff_add_string): Check add_memory_shuffle return. * libbfd-in.h (xmalloc, bfd_xmalloc, bfd_xmalloc_by_size_t): Remove decls. * libbfd.h: Rebuilt. Fri Feb 11 15:35:32 1994 Stu Grossman (grossman at cygnus.com) * configure.host: Add Lynx/rs6000 support. * config/i386-nlm.mt: Enable a.out file support. * config/rs6000lynx.mh: Lynx/rs6000 host support. Fri Feb 11 17:25:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * archive.c (compute_and_write_armap): Rewrite somewhat to improve memory usage. Fri Feb 11 13:10:42 1994 Stan Shebs (shebs@andros.cygnus.com) * archive.c: Change all references to '\n' in archive magic to '\012', for greater portability. * ecoff.c (ecoff_write_armap): Ditto. Thu Feb 10 12:58:48 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * aoutx.h (aout_link_write_other_symbol): Check strip settings to see whether symbol should be output. * genlink.h (struct generic_write_global_symbol_info): Added info field. * linker.c (_bfd_generic_final_link): Initialize wginfo.info. (_bfd_generic_link_write_global_symbol): Check strip settings to see whether symbol should be output. * elf32-mips.c (mips_elf_final_link): Initialize wginfo.info. Wed Feb 9 21:34:58 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * som.c (som_reloc_queue_find): Do not examine a NULL queue entry. * som.c: Cast return values from BFD memory allocation routines to avoid warnings from the HP compiler. Wed Feb 9 12:55:02 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * coff-alpha.c (alpha_relocate_section): Accept a LITERAL reloc on an "ldl" instruction too. * archive.c (bfd_ar_hdr_from_filesystem): Cast status elements when passing them to sprintf. Use %ld instead of %d. * coff-rs6000.c (rs6000coff_mkarchive): Return false. (rs6000_coff_snarf_ar_hdr): Don't declare errno; it's not used. Also removed unused variable namelen. (rs6000coff_write_armap): Declare orl_count and stridx parameters. Tue Feb 8 18:00:34 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * libbfd-in.h (xmalloc): Don't declare parameter type, to avoid conflicts. * libbfd.h: Rebuilt. Tue Feb 8 15:55:50 1994 Ken Raeburn (raeburn@cujo.cygnus.com) * coff-alpha.c (reloc_nil): New function. (alpha_howto_table): Use it as special_function to prevent certain relocs from being adjusted by bfd_perform_relocation. IGNORE reloc should be partial_inplace. (alpha_ecoff_get_relocated_section_contents): Accept a LITERAL reloc on an "ldl" instruction too. Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * elf32-hppa.c (CURRENT_STUB_OFFSET, hppa_elf_build_arg_reloc_stub, hppa_elf_build_long_branch_stub): Cast to char * instead of int before performing pointer arithmetic. Mon Feb 7 20:56:27 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * config.bfd (hppa*-*-osf*): Use bfd_name hppaosf for this configuration. (hppa*-*-*elf*): This configuration used hppa-elf now. * som.c: This file is also used for HOST_HPPAOSF. * targets.c (bfd_target_vector): Enable som_vec for HOST_HPPAOSF. * hosts/hppaosf.h: New host configuration file. * config/hppabsd.mt (SELECT_VECS): Add bfd_elf32_hppa_vec as BSD handles both SOM and ELF object files. * config/hppaosf.mh (HDEFINES): Delete. No longer needed. (RANLIB): Doesn't do anything, define it to be "echo". * config/hppaosf.mt: New target makefile fragment for a PA running OSF1. Mon Feb 7 15:02:06 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * archures.c (enum bfd_architecture): Added bfd_arch_powerpc. (archures_init_table): If SELECT_ARCHITECTURES is not defined, added bfd_powerpc_arch. * bfd-in2.h: Rebuilt. * cpu-powerpc.c: New file. * Makefile.in (ALL_MACHINES, CFILES): Added cpu-powerpc.c. Rebuilt dependencies. * elfcode.h (bfd_section_from_shdr): Get vma and alignment_power of an SHT_STRTAB section from sh_addr and sh_addralign, rather than just setting them to zero. Sun Feb 6 20:04:10 1994 David J. Mackenzie (djm@thepub.cygnus.com) * elfcode.h (prep_headers, swap_out_syms): Check for NULL return from bfd_new_strtab. (elf_compute_section_file_positions): Check for false return from swap_out_syms. * linker.c (default_indirect_link_order): Check for NULL return from bfd_get_relocated_section_contents. * syms.c: Make example application in doc call xmalloc, not bfd_xmalloc. * aoutx.h (NAME(aout,slurp_symbol_table), aout_link_get_symbols, NAME(aout,link_hash_table_create)): * bout.c (b_out_slurp_reloc_table, b_out_squirt_out_relocs): * ecoff.c (ecoff_bfd_link_hash_table_create): * ecofflink.c (bfd_ecoff_debug_init): * format.c (bfd_check_format_matches): * linker.c (_bfd_generic_link_hash_table_create): (_bfd_generic_final_link): * reloc16.c (bfd_coff_reloc16_relax_section): (bfd_coff_reloc16_get_relocated_section_contents): * elf32-hppa.c (hppa_elf_build_arg_reloc_stub): * elf32-mips.c (mips_elf_final_link): * elfcode.h (bfd_new_strtab): (bfd_add_2_to_strtab): (elf_slurp_symbol_table): (elf_corefile_note): * libbfd.c (bfd_zmalloc): Use malloc and check the result, instead of bfd_xmalloc. Sat Feb 5 12:39:28 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * config.bfd: Put m68*-*-sysv* line after m68*-*-sysv4*. Sat Feb 5 05:32:44 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * srec.c (srec_write_record): Put CONST keyword for "src" before "unsigned", some compilers don't like it after "unsigned". * libcoff.h, libcoff-in.h (bfd_perform_slip): Rename "value" to "val" in prototype declaration because some compilers don't like arguments whose names are the same as types. Sat Feb 5 01:14:38 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * aoutx.h (aout_link_check_ar_symbols): Correct test for whether object file defines symbol. Also, if skipping a symbol, skip the second symbol of a N_WARNING or N_INDR symbol as well. Fri Feb 4 23:55:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) Add basic support for writing RS/6000 XCOFF files. * coff-rs6000.c (dummy_reloc): Removed. (rs6000coff_howto_table): Defined XCOFF relocs. (RTYPE2HOWTO): Defined to use rs6000coff_rtype2howto. (rs6000coff_rtype2howto): New function. (coff_bfd_reloc_type_lookup): Defined to use rs6000coff_reloc_type_lookup. (rs6000coff_reloc_type_lookup): New function. (SELECT_RELOC): Defined to set r_type and r_size fields. (COFF_LONG_FILENAMES): Defined. * coffcode.h (combined_entry_type): Changed fix_tag and fix_end fields to bitfields. Added fields fix_value and fix_scnlen. (sec_to_styp_flags): If STYP_DEBUG is defined, use it rather than STYP_INFO for the type of a section named .debug. (coff_add_missing_symbols): Don't define if RS6000COFF_C. (coff_write_object_contents): If RS6000COFF_C, don't call coff_add_missing_symbols. (coff_slurp_symbol_table): If RS6000COFF_C, then if the last aux entry has type STY_LD change the x_scnlen into a pointer to a symbol and set fix_scnlen. Also, for a C_BSTAT symbol, change the value into a pointer to a symbol and set fix_value. * libcoff.h: Rebuilt. * coffgen.c (coff_mangle_symbols): Reindent. If fix_value is set, get the symbol offset. Likewise for fix_scnlen. (string_size): Change type to bfd_size_type. (debug_string_size, debug_string_section): New static variables. (coff_fix_symbol_name): If bfd_coff_symname_in_debug returns true, write the symbol name into the .debug section; assume that the section has already been created with the right size. (coff_write_symbols): Initialize debug_string_size to 0. If bfd_coff_symname_in_debug returns true, don't put symbol name in usual string table. After writing out all symbols, if debug_string_size is not 0, check that it matches the size of the .debug section. (coff_get_normalized_symtab): Clear new fix_value and fix_scnlen fields. If the string offset is 0, always use an empty string as the name. (coff_make_empty_symbol): Zero out the symbol structure. * reloc.c (bfd_perform_relocation): Work around one gross hack with another: actually look at the target name to avoid the broken COFF check. (bfd_reloc_code_real_type): Add BFD_RELOC_PPC_B26, BFD_RELOC_PPC_BA26 and BFD_RELOC_PPC_TOC16. * bfd-in2.h: Rebuilt. Fri Feb 4 17:28:32 1994 David J. Mackenzie (djm@thepub.cygnus.com) * libbfd.c (bfd_zmalloc): Call bfd_xmalloc instead of malloc. (bfd_xmalloc, bfd_xmalloc_by_size_t): Functions deleted. * libbfd-in.h: Define them as macros calling xmalloc and declare xmalloc. * libbfd.h: Rebuilt. Thu Feb 3 16:49:35 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * ecofflink.c (bfd_ecoff_debug_externals): If a small undefined symbol has a value in the ECOFF symbol but not in the BFD symbol, keep the value in the ECOFF symbol. This helps gas. * linker.c (_bfd_generic_link_output_symbols, _bfd_generic_link_write_global_symbol): Don't require that all references to a common symbol be themselves common symbols. * aoutx.h (aout_reloc_index_to_section): Handle N_UNDF. Wed Feb 2 20:37:19 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * libbfd.c, bfd-in.h, hosts/alphaosf.h, hosts/sparc-ll.h, aoutf1.h, sparclynx.c, Makefile.in: Change HOST_64_BIT to BFD_HOST_64_BIT. * bfd-in2.h: Rebuilt. Wed Feb 2 12:30:13 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * coffswap.h (coff_swap_reloc_out): If RS6000COFF_C, handle type and size correctly. (coff_swap_aux_in): If RS6000COFF_C, change x_csect.x_scnlen to x_csect.x_scnlen.l to match change in coff/internal.h. (coff_swap_aux_out): Likewise. * coff-mips.c (mips_ecoff_backend_data), coff-alpha.c (alpha_ecoff_backend_data): Change casts of aux_in and aux_out fields to match yesterday's changes. * coffcode.h (coff_write_relocs): If SELECT_RELOC is defined, pass in the internal_reloc itself, not the type. * coff-apollo.c, coff-h8300.c, coff-h8500.c, coff-i386.c, coff-m68k.c, coff-sh.c, coff-we32k.c, coff-z8k.c: Changed definition of SELECT_RELOC accordingly. Tue Feb 1 12:05:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * coffcode.h (bfd_coff_backend_data): Added new arguments to _bfd_coff_swap_aux_in and _bfd_coff_swap_aux_out: aux index number and number of aux entries. (bfd_coff_swap_aux_in, bfd_coff_swap_aux_out): Changed accordingly. * libcoff.h: Rebuilt. * coffswap.h (coff_swap_aux_in, coff_swap_aux_out): Accept new arguments. If RS6000COFF_C, only treat C_EXT and C_HIDEXT specially if this is the last aux entry. * coffgen.c (coff_write_symbol, coff_get_normalized_symtab): Pass new arguments to swap_aux functions. Sun Jan 30 15:14:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com) * gen-aout.c (main): Set DEFAULT_ARCH based on preprocessor macros (only testing for m68k and vax at the moment); do verify that the preprocessor didn't trash the arch name inside the string version. Don't print out "pagesize =" line that prevents output from compiling. Derive BYTES_IN_WORD and ARCH values from sizeof results. * Makefile.in (aout-params.h): Pass gen-aout a dummy target name. (check, installcheck): Identify directory in "no testsuites" message. Sun Jan 30 13:25:28 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * aoutx.h (aout_link_write_symbols): Write out correct value for object file symbol. Fri Jan 28 18:34:05 1994 Ken Raeburn (raeburn@cujo.cygnus.com) * hosts/vaxbsd.h (HOST_STACK_END_ADDR): Vax BSD doesn't define KERNBASE, so hard-code 0x80000000 instead. Thu Jan 27 13:54:08 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * linker.c (generic_link_add_symbol_list): If symbol is common, set the BSF_OLD_COMMON flag. Wed Jan 26 13:47:15 1994 David J. Mackenzie (djm@thepub.cygnus.com) * format.c (bfd_check_format_matches): Put the new entry in the correct element of matching_vector. Tue Jan 25 11:43:28 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * som.c, som.h (bfd_som_set_section_attributes, bfd_som_set_subsection_attributes): Change parameters from char to int. Following a prototype with an old-style function definition in the presence of widened parameters is a GCC-ism not supported by the HP compiler in ANSI mode. Tue Jan 25 11:46:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * reloc.c (bfd_get_reloc_size): Size of type -2 is 4 bytes, not 2. * hp300hpux.c (MY(write_object_contents)): Write out the symbols before writing out the relocs, so that the right symbol indices are used. * archive.c (do_slurp_bsd_armap, bfd_slurp_bsd_armap_f2): Do not try to overlay the internal carsyms on the external symdefs. That can not work if the size of a host pointer is larger than 4 bytes. * format.c (bfd_check_format_matches): Cast result of bfd_xmalloc_by_size_t. * opncls.c (_bfd_new_bfd): Avoid ANSI C prototype. * archive.c: Reindented to GNU standards. Mon Jan 24 14:41:23 1994 David J. Mackenzie (djm@thepub.cygnus.com) * opncls.c (_bfd_new_bfd, _bfd_new_bfd_contained_in): Add "_bfd_" to function names. * archive.c (_bfd_create_empty_archive_element_shell), libbfd-in.h: Change callers. * libbfd.c (bfd_zmalloc): Renamed from zalloc. * libbfd.c (bfd_add_to_string_table), trad-core.c (trad_unix_core_file_p), targets.c (bfd_target_list), ptrace-core.c (ptrace_unix_core_file_p), opncls.c (new_bfd), libbfd-in.h, ieee.c (ieee_make_empty_symbol), elf32-hppa.c (hppa_elf_stub_branch_reloc), (hppa_elf_stub_reloc): Change callers. * libbfd.h: Regenerated. * archive.c (_bfd_look_for_bfd_in_cache): Add "_bfd_" to name. (_bfd_get_elt_at_filepos), coff-rs6000.c (rs6000coff_get_elt_at_filepos), libbfd-in.h: Change callers. * format.c (bfd_check_format_matches), libbfd-in.h, targets.c, elfcode.h (elf_object_p): Rename target_vector to bfd_target_vector and default_vector to bfd_default_vector. * libbfd.h: Regenerated. * format.c (bfd_check_format_matches): New function. (bfd_check_format): Call it. (bfd_matching_formats): Function removed. * targets.c: Replace the vector added on Jan 21 with a count of entries in default_vector. * bfd-in2.h: Regenerated. Mon Jan 24 12:38:54 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * coff-alpha.c (alpha_ecoff_object_p): New function. Set size of .pdata section based on lnnoptr field, not section header. (alpha_relocate_section): Don't bother to check if r_symndx >= 0, since it is unsigned. (ecoffalpha_little_vec): Use alpha_ecoff_object_p rather than coff_object_p. * ecoff.c (ecoff_new_section_hook): Set alignment_power field of .pdata section to 3. (ecoff_compute_section_file_positions): Save the size of the .pdata section in the line_filepos field, and actually align the .pdata section to an alignment power of 4. (ecoff_compute_reloc_file_positions): Set output_has_begun after calling ecoff_compute_section_file_positions. (ecoff_write_object_contents): Set s_lnnoptr for the .pdata section from the line_filepos field. Set vstamp for the optional header from the vstamp of the symbolic header. (ecoff_bfd_final_link): Set vstamp of the symbolic header to the vstamp used by the first object file in the link. * ecofflink.c (ecoff_align_debug): Align RFDs to debug_align. * linker.c (generic_link_check_achive_element): Set SEC_ALLOC flag for a created common section. (_bfd_generic_link_add_one_symbol): Likewise. * elfcode.h (swap_out_syms): Use elf_section_from_bfd_section to get the index of a common section, rather than always using SHN_COMMON (MIPS has multiple common sections). * elf32-hppa.c (hppa_elf_gen_reloc_type): Typo (== for =). * bfd/aoutx.h (aout_link_input_section_std, aout_link_input_section_ext): Pass additional arguments to reloc_overflow callback. * coff-alpha.c (alpha_ecoff_get_relocated_section_contents, alpha_relocat_section): Likewise. * coff-h8300.c (h8300_reloc16_extra_cases): Likewise. * coff-h8500.c (extra_case): Likewise. * coff-mips.c (mips_relocate_section): Likewise. * coff-z8k.c (extra_case): Likewise. * elf32-hppa.c (hppa_elf_stub_finish): Likewise. * reloc.c (bfd_generic_get_relocated_section_contents): Likewise. * bout.c (calljx_callback, callj_callback): Use get_value to get the symbol value and check for undefined symbols. (get_value): If the symbol is undefined, look it up in the linker hash table. (b_out_get_relocated_section_contents): For PCREL24 and PCREL13 use get_value to get the symbol value and check for undefined symbols. * reloc16.c (bfd_coff_reloc16_get_value): If the symbol is undefined, look it up in the linker hash table. * aoutx.h (translate_symbol_table): The string index 0 has a special meaning for normal symbols, but not for dynamic symbols. Sat Jan 22 12:26:01 1994 Stu Grossman (grossman at cygnus.com) * sparclynx.c: Setup appropriate macros to enable core file support. Fri Jan 21 16:25:35 1994 David J. Mackenzie (djm@thepub.cygnus.com) * targets.c: Add a vector of matching format names. * format.c (bfd_matching_formats): New function to return it. (bfd_check_format): Set it. * bfd-in2.h: Regenerated. * bfd-in.h: Remove decls of bfd_ec type and error printing functions. Remove decl of type symclass; wasn't used. * bfd.c: Document error handling, including code fragments containing the error decls that were in bfd-in.h. Remove DEFUNs. * bfd-in2.h: Regenerated. Fri Jan 21 14:11:16 1994 Sean Fagan (sef@cygnus.com) * nlmcode.h, liblnm.h, nlm32-alpha.c nlm32-i386.c nlm32-sparc.c: The sparc (and possibly other?) NLM format requires a different way to write exports, so add a write_export field to the backend data (and set it to NULL for everything but the sparc). Fri Jan 21 14:11:16 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * sunos.c (MY(read_dynamic_relocs)): Compare info->dynrel with NULL, not (struct external_nlist *) NULL. info->dynrel is a PTR, not a struct external_nlist *. Fri Jan 21 09:29:01 1994 David J. Mackenzie (djm@thepub.cygnus.com) * bfd.c: Remove error strings for errors removed below. * aoutx.h (translate_to_native_sym_flags), bfd-in.h (bfd_ec), oasys.c (oasys_write_sections): Rename bfd_error_nonrepresentable_section to nonrepresentable_section. None of the other bfd error names start with "bfd_error". Remove errors symbol_not_found and no_relocation_info, which seem to be unused. * bfd-in2.h: Regenerated. Fri Jan 21 01:11:55 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * bfd.c (bfd_get_gp_size): Added support for ELF. * syms.c (BSF_DYNAMIC): New symbol flag. (bfd_print_symbol_vandf): Print it. * bfd-in2.h: Rebuilt. * libaout.h (struct aout_backend_data): New read_dynamic_symbols and read_dynamic_relocs fields. (struct aoutdata): New dynamic_info field. (obj_aout_dynamic_info): New accessor macro. * sunos.c (struct sunos_dynamic_info): New structure. (sunos_read_dynamic_info, MY(read_dynamic_symbols), MY(read_dynamic_relocs)): New functions to read dynamic symbols and relocs. * aoutx.h (NAME(aout,some_aout_object_p)): If the object is dynamically linked, set SEC_RELOC for both the .text and .data sections. (translate_from_native_sym_flags): Don't set BSF_LOCAL for an undefined symbol. (translate_symbol_table): New function, split out of slurp_symbol_table; set the BSF_DYNAMIC flag appropriately. (NAME(aout,slurp_symbol_table)): Read dynamic symbols, if any. (NAME(aout,slurp_reloc_table)): Read dynamic relocs, if any. (NAME(aout,get_reloc_upper_bound)): Include dynamic reloc count in return value. * aoutf1.h (NAME(aout,sunos4_write_object_contents)): Don't write out dynamic symbols or relocs against reloc symbols, since they are already in the .text section and we wouldn't know where to write them anyhow. (sunos4_aout_backend): Initialize read_dynamic_symbols and read_dynamic_relocs fields. * aout-target.h (MY(backend_data)): Initialize read_dynamic_symbols and read_dynamic_relocs fields. Thu Jan 20 20:57:27 1994 Ken Raeburn (raeburn@cujo.cygnus.com) * hosts/alphaosf.h (uint64e_type, uint64_type, int64_type): Delete typedefs, since HOST_64_BIT will take care of defining them in bfd.h. Wed Jan 19 17:28:59 1994 Ken Raeburn (raeburn@cujo.cygnus.com) * config/alphaosf.mh (HDEFINES): Don't define HOST_64_BIT here; that's dealt with elsewhere. * hosts/alphaosf.h (sprintf_vma, fprintf_vma): New macros. (uint64_typeHIGH, uint64_typeLOW): Comment with HOST_64_BIT so they get copied to bfd.h. * reloc.c (enum bfd_reloc_code_real): Add some Alpha relocation types. Reorganized some of the existing ones. * coff-alpha.c (alpha_howto_table): Construct 64-bit negative one values in case of compilation on a 32-bit machine. Fix pcrel fields of some reloc types. (alpha_bfd_reloc_type_lookup): Handle more relocation types. * bfd-in.h (uint64_typeHIGH, uint64_typeLOW): Supply default definitions when not defined, regardless of whether uint64_type is a defined macro or not. (fprintf_vma, sprintf_vma): Define only if fprintf_vma is not already defined. Wed Jan 19 00:02:54 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * aoutx.h (translate_to_native_sym_flags): Set the type of a BSF_WARNING symbol to N_WARNING. Tue Jan 18 16:43:19 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * aoutx.h (aout_link_add_symbols): Increment sym_hash as well as p for an indirect or warning symbol. (aout_link_write_symbols): Update sym_hash with the target of an indirect or warning symbol. If an indirect symbol is defined, output the calculated value and don't output the target symbol. Tue Jan 18 03:54:59 1994 David J. Mackenzie (djm@thepub.cygnus.com) * aoutx.h (translate_from_native_sym_flags): Give warning symbols an (unused) nonzero section value, needed for check below. Mon Jan 17 15:12:07 1994 David J. Mackenzie (djm@thepub.cygnus.com) * aoutx.h (translate_from_native_sym_flags, aout_link_add_symbols): Treat N_SET[ABDT] | N_EXT like N_SET[ABDT]. Fri Jan 14 16:45:43 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * elfcode.h (elf_object_p): If there is a SHT_DYNAMIC section, set the DYNAMIC flag for the BFD. (NAME(bfd_elf,write_object_contents)): Don't try to write out a BFD with the DYNAMIC flag set, since we don't generate the program header table correctly. Fri Jan 14 01:04:36 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * elfcode.h (elf_slurp_symbol_table): Free x_symp at the end of the function to avoid storage leak. Thu Jan 13 23:07:32 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * ecoff.c (ecoff_link_write_external): An ifd can be -1. Thu Jan 13 12:33:27 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * som.c (som_set_reloc_info): Provide a default symbol for relocations which don't actually have an associated symbol. * som.c (hppa_som_reloc): Add new "error message" argument. Wed Jan 12 13:36:43 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) Enable gdb to write to core files on more core file readers. * libbfd.c (bfd_generic_set_section_contents): Remove range check for section size, it is already done in bfd_set_section_contents with bfd_get_section_size_now. * aix386-core.c, hppabsd-core.c, hpux-core.c, irix-core.c, osf-core.c, ptrace-core.c, trad-core.c (*_set_section_contents): Use bfd_generic_set_section_contents instead of bfd_false. Wed Jan 12 15:31:57 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * linker.c: Added initial documentation. * linker.c (default_indirect_link_order): Don't expect space for output relocations if there aren't any input relocations. Tue Jan 11 14:37:12 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * aoutx.h (NAME(aout,final_link)): Set a_entry before computing file offsets. * elfcode.h (swap_out_syms): A common symbol is STT_OBJECT, not STT_NOTYPE. Tue Jan 11 09:10:56 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * config.bfd: Use ELF, not COFF for m88*-*-dgux*. Combine m88k-*-* and m88110-*-* cases into m88*-*-*. Tue Jan 11 00:07:19 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * ecofflink.c: Extensive changes to compress and merge debugging information, and to write some of out directly rather than saving it in memory. Several new functions and structures, and new arguments to existing functions. * ecoff.c (ecoff_compute_reloc_file_positions): Compute sym_filepos as well. (ecoff_get_extr): Use ifdmap instead of ifdbase. (ecoff_write_object_contents): Don't compute sym_filepos here. Only output symbols if outsymbols is not NULL. (ecoff_bfd_final_link): Adjust for changes in ecoff_debug_info and bfd_ecoff_debug functions. Write out debugging information here. (ecoff_final_link_debug_accumulate): Adjust for changes in bfd_ecoff_debug functions. (ecoff_link_write_external): Use ifdmap rather than ifdbase. * elf32-mips.c (mips_elf_read_ecoff_info): Read external symbols first, to put them in the first memory buffer. Clear fdr field. (mips_elf_get_extr): Use pointer to unswapped external symbol. (mips_elf_final_link): Adjust for changes in bfd_ecoff functions. Preserve .text, .data and .bss even if they are empty. Save pointer to unswapped external symbol rather than copying it. Don't free up the external symbols. * libelf.h (elf_symbol_type): Change mips_extr to PTR. * bfd-in.h (bfd_ecoff_debug_init, bfd_ecoff_debug_free): Declare. (bfd_ecoff_debug_accumulate): Update declaration. (bfd_ecoff_debug_accumulate_other): Rename declaration from bfd_ecoff_debug_link_other and update. (bfd_ecoff_write_accumulated_debug): Declare. * bfd-in2.h: Rebuilt. * Makefile.in: Rebuilt dependencies. Mon Jan 10 20:46:53 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * Makefile.in (install): Remove "@" which follows a backslash. In this position it just causes errors, not suppresses echoes. Mon Jan 10 09:06:21 1994 Jeffrey A. Law (law@snake.cs.utah.edu) * som.c (hppa_som_gen_reloc_type): Fix handling of LT and RT field selectors. Sun Jan 9 04:32:25 1994 Ken Raeburn (raeburn@kr-pc.cygnus.com) * config/i386-netbsd.mt (SELECT_VECS): Include i386bsd_vec. Fri Jan 7 10:27:27 1994 David J. Mackenzie (djm@rtl.cygnus.com) * aoutx.h (adjust_z_magic): Don't merge the start of bss with the end of data if they are not contiguous. * aoutf1.h (sunos4_aout_backend): Comment the fields' meanings. Fri Jan 7 15:40:16 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * ecoff.c (ecoff_mkobject_hook): Don't set SEC_SHARED_LIBRARY flag for .reginfo section here. (ecoff_new_section_hook): Set it here instead. Fri Jan 7 10:29:27 1994 Stan Shebs (shebs@andros.cygnus.com) * bfd-in.h: (bfd_boolean): Add workaround for systems that also define true and false as enums. (ALMOST_STDC): Add as alternative to __STDC__. * bfd-in2.h: Rebuilt. * syms.c (bfd_print_symbol_vandf): Convert a PTR to FILE*. Thu Jan 6 14:24:44 1994 David J. Mackenzie (djm@thepub.cygnus.com) * aoutx.h (translate_to_native_sym_flags): Catch the case where there is no output section. Thu Jan 6 14:37:42 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * nlmcode.h (nlm_object_p): If we can't read the fixed header, count it as a wrong format error, not a system call error, since the object file might simply be too small. * targets.c (target_vector): Added nlm32_alpha_vec inside #ifdef BFD64. * Makefile.in (BFD32_BACKENDS): Remove nlm32-alpha.o. (BFD64_BACKENDS): Add nlm32-alpha.o. It depends on 64 bit support, even though it is for an Alpha in 32 bit mode. * configure.in (nlm32_alpha_vec): Set target64 to true. * nlm32-gen.c, nlm64-gen.c: Removed. All nlm targets are different, so there is no point to providing a generic one. * libnlm.h: Don't bother to check for nlm_backend(bfd) being NULL in the backend accessor macros; that should no longer be possible. * targets.c (target_vector): Removed nlm32_big_generic_vec, nlm64_big_generic_vec, nlm64_little_generic_vec. * configure.in (nlm32_big_generic_vec, nlm32_little_generic_vec, nlm64_big_generic_vec, nlm64_little_generic_vec): Removed. * Makefile.in: Rebuilt dependencies, and (BFD32_BACKENDS): Removed nlm32-gen.o. (BFD64_BACKENDS): Removed nlm64-gen.o. (CFILES): Removed nlm32-gen.c and nlm64-gen.c. * hp300hpux.c (ARCH_SIZE): Define before including aoutx.h. * linker.c (_bfd_generic_link_add_one_symbol): Add constructor and bitsize arguments. Changed all callers (aoutx.h). * libbfd-in.h (_bfd_generic_link_add_one_symbol): Add constructor and bitsize arguments to declaration. * libbfd.h: Rebuilt. * ecoff.c: First cut at new style of linker backend for ECOFF--added a bunch of functions. Also: (ecoff_sec_to_styp_flags): Set flags for .pdata and .xdata. (ecoff_slurp_symbolic_header): New function. (ecoff_slurp_symbolic_info): Call ecoff_slurp_symbolic_header. (ecoff_compute_reloc_file_positions): New function. (ecoff_set_section_contents): Get out quickly if count is zero. Check errors better. (ecoff_write_object_contents): Put .xdata section in data segment. Call ecoff_compute_reloc_file_positions. Don't output relocs or external symbols if outsymbols is NULL. (ecoff_bfd_final_link): Completely rewritten. * libecoff.h: Include bfdlink.h. (struct ecoff_backend_data): Add relocate_section field. (ecoff_data_type): Add sym_hashes and symndx_to_section fields. (struct ecoff_link_hash_entry): Define. (struct ecoff_link_hash_table): Define. (ecoff_bfd_link_add_symbols): Declare as function, not macro. (ecoff_bfd_link_hash_table_create): Likewise. * ecofflink.c (bfd_ecoff_debug_one_external): New function. (bfd_ecoff_debug_externals): Call bfd_ecoff_debug_one_external. * bfd-in.h (bfd_ecoff_debug_one_external): Declare. * bfd-in2.h: Rebuilt. * coff-alpha.c (alpha_howto_table): Mark BRADDR as partial_inplace, and set the src_mask to 0x1fffff. (alpha_ecoff_get_relocated_section_contents): Remove unused variable gp_warned. (alpha_convert_external_reloc): New static function. (alpha_relocate_section): New static function. (alpha_ecoff_backend_data): Initialize relocate_section field. * coff-mips.c (mips_relocate_refhi): New static function. (mips_relocate_section): New static function. (mips_ecoff_backend_data): Initialize relocate_section field. * reloc.c (_bfd_relocate_contents): Corrected signed overflow checking when there is an addend. * aoutx.h (NAME(aout,final_link)): Don't abort when trying to link a non a.out file, just pass it to _bfd_default_link_order. (aout_link_input_section_std): When doing a final PC relative link against a section symbol, subtract the VMA of the input section. (aout_link_input_section_ext): Likewise. * linker.c (default_indirect_link_order): Renamed from _bfd_generic_indirect_link_order and made static. (_bfd_generic_final_link): Don't switch on link_order type, just call _bfd_default_link_order. (_bfd_default_link_order): Handle bfd_indirect_link_order type. * genlink.h: Removed declaration of _bfd_generic_indirect_link_order. * elf32-mips.c (mips_elf_final_link): Don't switch on link_order type, just call _bfd_default_link_order. Tue Jan 4 21:23:37 1994 Ian Lance Taylor (ian@cygnus.com) * linker.c (generic_link_check_archive_element): Base the name of the created common section on the name of the section the symbol came from. (_bfd_generic_link_add_one_symbol): (case BIG): A common symbol must have a section, so don't bother to create one. Mon Jan 3 15:32:16 1994 David J. Mackenzie (djm@thepub.cygnus.com) * aout-target.h (MY(vec)): Add DYNAMIC to mask of object flags. * aoutf1.h (NAME(aout,sunos4_write_object_contents)): If the DYNAMIC flag is set, set it in the exec header. * aoutx.h (NAME(aout,some_aout_object_p)): If the object is dynamically linked, set the DYNAMIC flag in the BFD. * libaout.h (N_SET_DYNAMIC): New macro. (N_DYNAMIC): Add missing 0 in mask. Mon Jan 3 11:41:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * ecoff.c (ecoff_get_extr): Don't output section symbols as external symbols. * bfd-in.h, hash.c: Change bfd_hash_allocate argument from size_t to unsigned int, because size_t may not be defined in bfd.h. * bfd-in2.h: Rebuilt. * bfd-in.h (bfd_get{b,l}[_signed_]{16,32,64}): Declare argument to be a const pointer. * bfd-in2.h: Rebuilt. * libbfd.c (bfd_get{b,l}[_signed_]{16,32,64}): Declare argument to be a const pointer. * targets.c (bfd_target): Change swap function pointers accordingly. * archive.c (do_slurp_coff_armap): Change swap accordingly. * aix386-core.c: Change NO_GET and NO_GETS accordingly. * hppabsd-core.c, hpux-core.c, irix-core.c, osf-core.c, ptrace-core.c, trad-core.c: Change NO_GET and NO_SIGNED_GET accordingly. * libbfd-in.h (struct artdata): Added tdata field. (_bfd_add_bfd_to_archive_cache): Declare. (_bfd_get_elt_at_filepos): Declare. (_bfd_snarf_ar_hdr): Renamed from snarf_ar_hdr. * libbfd.h: Rebuilt. * archive.c: Cleaned up some more. (_bfd_generic_mkarchive, bfd_generic_archive_p): Initialize pointer elements of artdata. (_bfd_add_bfd_to_archive_cache): Renamed from add_bfd_to_cache. (_bfd_snarf_ar_hdr): Renamed from snarf_ar_hdr. (_bfd_get_elt_at_filepos): Renamed from get_elt_at_filepos. (get_extended_arelt_filename, bfd_construct_extended_name_table, bfd_ar_hdr_from_filesystem, compute_and_write_armap): Made static. * ecoff.c: Some comment changes. (ecoff_slurp_armap): Handle rename of snarf_ar_hdr. Set ardata->tdata to raw_armap. (ecoff_archive_p): Initialize pointer elements of artdata. * coff-rs6000.c (rs6000coff_get_elt_at_filepos): Handle rename of add_bfd_to_cache. * hash.c: Added some documentation. Mon Jan 3 11:09:28 1994 Jim Kingdon (kingdon@lioth.cygnus.com) * aout-target.h, netbsd386.c: Replace NO_SWAP_MAGIC with SWAP_MAGIC, and do the swapping here rather than calling ntohl from the N_* macros. This cleans up assumptions about the size of a host long, the existence to ntohl, etc. Sat Jan 1 13:50:05 1994 Rob Savoye (rob@darkstar.cygnus.com) * config.bfd: Add support for VSTa micro-kernel. It currently uses i386-aout. Sat Jan 1 10:18:54 1994 David J. Mackenzie (djm@thepub.cygnus.com) * hosts/i386mach3.h (HOST_SEGMENT_SIZE): Fix value. * i386mach3.c (SEGMENT_SIZE): Fix value. Fri Dec 31 16:23:43 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) Minor cleanups suggested by CodeCenter. * aoutx.h, coffgen.c, ecoff.c, ecofflink.c, elf.c, libbfd.c, linker.c, reloc.c, section.c, srec.c: Added /*ARGSUSED*/ as appropriate. * aoutx.h (struct external_exec): Removed unnecessary declaration. (NAME(aout,some_aout_object_p)): Set some tdata pointers to NULL. (adjust_z_magic): Removed useless variable data_vma. (stringtab_init): Initialize hash_zero. (add_to_stringtab): Removed unused fourth argument. (NAME(aout,swap_std_reloc_out)): Removed useless variable r_addend. (aout_link_input_section): Added some casts. * archive.c (get_extended_arelt_filename, do_slurp_coff_armap, bfd_ar_hdr_from_filesystem, bsd_write_armap, coff_write_armap): Minor code rewriting to make it more C like. (do_slurp_bsd_armap): Added some casts. * ecoff.c (ecoff_write_object_contents): Removed useless variable scn_base. (ecoff_write_armap): Added some casts. Use "" rather than "\0". * ecofflink.c (bfd_ecoff_write_debug): Added a cast. * libaout.h (struct internal_exec): Removed unnecessary declaration. * linker.c (_bfd_generic_indirect_link_order): Added a cast. * opncls.c (new_bfd): Removed a cast. * reloc.c (bfd_generic_get_relocated_section_contents): Added some casts. * srec.c (internal_srec_write_object_contents): Removed useless variable bytes_written. Fri Dec 31 11:46:13 1993 David J. Mackenzie (djm@thepub.cygnus.com) * i386mach3.c (N_TXTADDR): Don't define after all. (TEXT_START_ADDR): Don't include exec header size in value. Thu Dec 30 15:47:54 1993 David J. Mackenzie (djm@thepub.cygnus.com) * i386mach3.c (N_TXTADDR): Define. Thu Dec 30 13:37:24 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) Extensive changes to move the bulk of the linker into BFD so that more efficient backend code can be written for specific object files. Only existing efficient backend is a.out. * seclet.c, seclet.h: Removed. * hash.c, linker.c, genlink.h: New files. * bfd-in.h: Removed bfd_error_vector. Declared hash table structures and functions. (JUMP_TABLE): Removed bfd_seclet_link, added bfd_link_hash_table_create, bfd_link_add_symbols and bfd_final_link. * All backends: Changed accordingly. * bfd-in2.h: Rebuilt. * bfd.c (struct _bfd): Added link_next and archive_pass fields. Removed ld_symbols field. (bfd_nonrepresentable_section, bfd_undefined_symbol, bfd_reloc_value_truncated, bfd_reloc_is_dangerous, bfd_error_vector): Removed. (bfd_default_error_trap, bfd_error_trap, bfd_error_nonrepresentabltrap): Removed. (bfd_get_relocated_section_contents): Pass link_info. Pass link_order instead of seclet. Pass symbols. (bfd_relax_section): Pass link_info. (bfd_seclet_link): Removed. (bfd_link_hash_table_create, bfd_link_add_symbols, bfd_final_link): New macros. * libbfd-in.h: If __GNUC__ is defined and alloca is not, define alloca as __builtin_alloca. Declare internal linking functions. * libbfd.h: Rebuilt. * libbfd.c (bfd_seek): Comment out fseek assertion. It's worked for months. * reloc.c (reloc_howto_type): Added error_message argument to special_function field. Changed all callers and all definitions. (bfd_get_reloc_size): Make argument a const pointer. (bfd_perform_relocation): Add error_message argument to hold string set if return value if bfd_reloc_dangerous. Changed all callers. (_bfd_final_link_relocate, _bfd_relocate_contents): New functions. * section.c (asection): Renamed seclets_head and seclets_tail to link_order_head and link_order_tail. * targets.c (bfd_target): Replaced seclet argument with link_info and link_order and symbols arguments in bfd_get_relocated_section_contents. Added symbols argument to bfd_relax_section. Removed bfd_seclet_link. Added bfd_link_hash_table_create, bfd_link_add_symbols and bfd_final_link. * libaout.h (struct aoutdata): Added external_syms, external_sym_count, external_strings, sym_hashes fields. (obj_aout_external_syms, obj_aout_external_sym_count, obj_aout_external_strings, obj_aout_sym_hashes): New accessor macros. (WRITE_HEADERS): Only output symbols if outsymbols is not NULL. * aoutx.h: Wrote new back end linker routines. (translate_to_native_sym_flags): Return boolean value. Don't use bfd_error_vector. (NAME(aout,write_syms)): Return boolean value. Check return value of translate_to_native_sym_flags and bfd_write. * aout-target.h (final_link_callback): New function. (MY_bfd_final_link): New function. * aout-adobe.c (aout_adobe_write_object_contents): Check return value of aout_32_write_syms. * hp300hpux.c (MY(write_object_contents)): Likewise. * i386lynx.c (WRITE_HEADERS): Likewise. * libaout.h (WRITE_HEADERS): Likewise. * bout.c: Changed functions to use link_info->callbacks rather than bfd_error_vector, and link_orders rather than seclets. * coff-alpha.c: Likewise. * coff-h8300.c: Likewise. * coff-h8500.c: Likewise. * coff-sh.c: Likewise. * coff-z8k.c: Likewise. * elf32-hppa.c: Likewise. * reloc16.c: Likewise. * coff-alpha.c (alpha_ecoff_get_relocated_section_contents): Look up _gp in the hash table rather than in outsymbols. * coff-a29k.c (a29k_reloc): Pass errors back in new error_message argument rather than printing them. * coffcode.h (bfd_coff_reloc16_extra_cases): Take link_info and link_order arguments rather than seclet. Changed all uses and definitions. (bfd_coff_reloc16_estimate): Pass link_info arguments. Changed all uses and definitions. * libcoff.h: Rebuilt. * ecoff.c (ecoff_get_extr): If symbol is defined by linker, but not by ECOFF, make it scAbs. (ecoff_bfd_final_link): Renamed from ecoff_bfd_seclet_link and rewritten. * elf32-mips.c (mips_elf_final_link): Renamed from mips_elf_seclet_link and rewritten. * elf32-hppa.c (elf32_hppa_stub_description): Added link_info field. (new_stub, add_stub_by_name, hppa_elf_build_arg_reloc_stub, hppa_elf_build_long_branch_stub, hppa_look_for_stubs_in_section): Added link_info arguments. Changed all callers. * elfcode.h (elf_slurp_symbol_table): Don't quit if outsymbols is not NULL. * oasys.c (oasys_write_sections): Return boolean value rather than using bfd_error_vector. (oasys_write_object_contents): Check return value of oasys_write_sections. * hosts/std-host.h: Don't declare qsort or strtol. * Makefile.in: Rebuild dependencies. (BFD_LIBS): Removed seclet.o. Added hash.o and linker.o. (CFILES): Removed seclet.c. Added hash.c and linker.c. (HFILES): Removed seclet.h. Added genlink.h. Thu Dec 30 07:41:36 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * section.c (bfd_get_section_contents): Return zero filled buffer if section has no contents. Tue Dec 28 12:43:54 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * elf.c (bfd_elf_generic_reloc): If this is not an inplace reloc, then skip bfd_perform_relocation even if the addend is non-zero. Tue Dec 21 09:22:19 1993 Ken Raeburn (raeburn@rtl.cygnus.com) * coffcode.h (coff_write_relocs) [SWAP_OUT_RELOC_OFFSET]: Copy addend to r_offset field. * Makefile.in (CFILES): Added coff-sparc.c. Rebuild dependencies. * coff-sparc.c (SWAP_IN_RELOC_OFFSET, SWAP_OUT_RELOC_OFFSET, CALC_ADDEND): Define. * aix386-core.c (aix386_core_file_p): Use cd_regs[0] for computing the offsetof because AIX /bin/cc does not like to take the address of an array. (From Minh Tran-Le.) Thu Dec 16 13:06:32 1993 Jeffrey A. Law (law@snake.cs.utah.edu) * Thu Dec 16 15:41:06 1993 Peter Hoogenboom (hoogen@cs.utah.edu) * elf32-hppa.c (hppa_elf_build_arg_reloc_stub): Make sure to copy the return pointer into %r2 if no jump-in-call-delay-slot optimization was done. * hosts/hp300bsd.h: Correctly identify 4.3BSD vs 4.4BSD. Wed Dec 15 08:04:16 1993 David J. Mackenzie (djm@thepub.cygnus.com) * hosts/std-host.h: (time): Don't declare; conflicts on Mach3. * hosts/i386mach3.h (HOST_PAGE_SIZE): Set to 1 to avoid padding. (HOST_SEGMENT_SIZE): Set to 0 for same reason. * i386mach3.c (PAGE_SIZE, SEGMENT_SIZE): Same changes as above. (TEXT_START_ADDR): Correct. (MY_backend_data): Define. * aoutx.h (adjust_o_magic, adjust_z_magic, adjust_n_magic): New functions; code moved from aout__adjust_sizes_and_vmas. Tue Dec 14 21:48:33 1993 Jeffrey A. Law (law@snake.cs.utah.edu) * som.c (som_begin_writing): Fix thinkos in auxiliary header support. (bfd_som_attach_aux_hdr): Likewise. Mon Dec 13 23:34:48 1993 Jeffrey A. Law (law@snake.cs.utah.edu) * elf32-hppa.c (hppa_elf_gen_reloc_type): Handle 'T' field selectors for PIC code. * som.c (hppa_som_gen_reloc_type): Handle 'T' field selectors. (som_write_fixups): Handle R_DLT_REL, R_FSEL, R_RSEL, R_LSEL relocations needed by PIC. Tue Dec 7 15:47:51 1993 Stu Grossman (grossman at cygnus.com) * nlmcode.h: Fixes to avoid compiler warnings... Tue Dec 7 15:10:54 1993 Ian Lance Taylor (ian@cygnus.com) * libnlm.h (nlm_backend_data): Removed macro definition. (nlm_alpha_backend_data): Adjusted accordingly. Sun Dec 5 19:32:08 1993 Jeffrey A. Law (law@snake.cs.utah.edu) * som.c (som_begin_writing): Flesh out code for handling simple auxiliary headers. (bfd_som_attach_aux_hdr): New function. * som.h (struct somdata): Add fields for attaching version and copyright headers. Add accessor macros. * som.c (R_DLT_REL, R_AUX_UNWIND, R_SEC_STMT): Add protected definitions for old versions of HPUX which fail to define them. (som_hppa_howto_talbe): Add R_DLT_REL, R_AUX_UNWIND, and R_SEC_STMT now that they're safe. Delete bogus R_STATEMENT relocations. * som.c (som_hppa_howto_table): Add missing R_END_TRY. Delete extra R_DATA_OVERRIDE. (hppa_som_gen_reloc_type): Generate a relocation for the rounding mode selector if needed. (som_write_fixups): Handle requests for a change in the default rounding mode. Rounding modes do not consume input bytes, but are just markers much like R_ENTRY and R_EXIT. Sat Dec 4 19:40:32 1993 Jeffrey A. Law (law@snake.cs.utah.edu) Fri Dec 3 09:55:17 1993 Pete Hoogenboom (hoogen@cs.utah.edu) * elf32-hppa.c: (hppa_elf_reloc): Do not do code reordering when the branch instruction as originally been nullified. hppa_elf_reloc): Avoid useless call to bfd_put_32 () in the case of no code reordering due to an LDO instruction in the delay slot of the branch. Make sure to relocate the correct instruction. Do not perform instruction reordering for millicode calls. (hppa_elf_build_arg_reloc_stub): Change the relocation type to R_HPPA_STUB_CALL_17 when special processing might be needed. (hppa_elf_build_long_branch_stub): Prevent code reordering on a call from a linker stub to another linker stub and for millicode calls. Do not trash the return register for calls from one linker stub to a second linker stub. * elf32-hppa.c: (elf_hppa_howto_table): PLABEL and DLT relocations are not pc-relative. * hppa_stubs.h: (BLE_N_XXX_0_31): New instruction used in linker stub code. (COPY_2_31): Likewise. Fri Dec 3 18:40:58 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * config/solaris2.mh (HDEFINES): Remove -Dconst= * hosts/solaris.h: If not __GNUC__, define const as empty. Thu Dec 2 15:43:32 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * ecoff.c: Added various casts for 32/64 bit cross targeting. (ecoff_mkobject_hook): Set SEC_SHARED_LIBRARY for the .reginfo section so that the linker ignores it. * ecofflink.c: Added various casts for 32/64 bit cross targeting. (ecoff_add_bytes): Changed need argument to size_t. (bfd_ecoff_debug_link_other): Check return value of ecoff_add_string. * libbfd-in.h (new_bfd): Use void rather than an empty parameter list. * libbfd.h: Rebuilt. * libnlm.h (struct nlm_obj_tdata): New field backend_data. (nlm_backend_data, nlm_alpha_backend_data): New accessor macros. (struct nlm_backend_data): New field no_uninitialized_data. (nlm_no_uninitialized_data): New accessor macro. * nlmcode.h (nlm_compute_section_file_positions): Handle no_uninitialized_data. (nlm_external_reloc_compare): Sort relocs by address for a particular symbol, to make the sort more stable. (nlm_write_object_contents): Cast the arguments to qsort. Get the value of a debugging symbol the same way we get the value of a normal symbol. * nlm32-alpha.c: Various changes. Write out GP and .lita relocs. Set no_uninitialized_data to true. * nlm32-i386.c (nlm32_i386_backend), nlm32-sparc.c (nlm32_sparc_backend): Set no_uninitialized_data field false. * nlmswap.h (nlm_swap_fixed_header_out): Zero out destination before filling it in. Wed Dec 1 21:47:58 1993 Jeffrey A. Law (law@snake.cs.utah.edu) * som.c (som_section_type, som_decode_symcalss): New functions. (som_get_symbol_info): Use them. (som_slurp_symbol_table): Set the section of common and undefined symbols correctly. Wed Dec 1 14:15:10 1993 Ken Raeburn (raeburn@cygnus.com) * elfcode.h (write_relocs): Initialize local var LAST_SYM_IDX, to make gcc happy. * mipsbsd.c: Changes from Ralph Campbell: (mips_howto_table_ext): MIPS_RELOC_LO16 should use complain_overflow_dont. (aout_mips_*_vec): Make name use "a.out" instead of "aout", to make gdb happy. * bfd.c (bfd_errmsgs): Reword invalid-target message. * config.bfd: For sparc*-*-coff, use sparc-coff. * configure.in: Handle sparccoff_vec. * targets.c (sparccoff_vec): Declare. * reloc.c (bfd_get_reloc_size): New function. (struct reloc_howto_type): Update documentation of size field. Wed Dec 1 14:39:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * nlm32-alpha.c: New file; preliminary Alpha NetWare support. * config.bfd (alpha-*-netware*): New target; use alpha-nlm. * config/alpha-nlm.mt: New file. * configure.in (nlm32_alpha_vec): New vector; use nlm32-alpha.o, nlm32.o, and nlm.o. * Makefile.in (BFD32_BACKENDS): Added nlm32-alpha.o. (CFILES): Added nlm32-alpha.c. Rebuilt dependencies. * targets.c (nlm32_alpha_vec): Declare. * libnlm.h (struct nlm_backend_data): New fields optional_prefix_size, nlm_backend_object_p, nlm_write_prefix, nlm_set_public_section, nlm_get_public_offset. Removed unused nlm_write_reloc field. Changed nlm_write_import to remove unnecessary symbol argument. Renamed nlm_write_externals to nlm_write_external, and changed cound argument from bfd_vma to bfd_size_type. (nlm_optional_prefix_size, nlm_backend_object_p_func, nlm_write_prefix_func, nlm_set_public_section_func, nlm_get_public_offset_func): New accessor macros. (nlm_write_reloc_func): Removed. (nlm_write_external_func): Adjusted for field renaming. * nlm32-i386.c (nlm_i386_write_import): Renamed from nlm_i386_write_reloc. Removed old nlm_i386_write_import which just called old nlm_i386_write_reloc. (nlm_i386_write_external): Renamed from nlm_i386_write_externals. Declared. Changed second argument from bfd_vma to bfd_size_type. (nlm32_i386_backend): Adjusted for changes to fields and names. * nlm32-sparc.c (nlm_sparc_mangle_relocs): Removed unused, ifdeffed out code. (nlm_sparc_write_import): Removed second argument. (nlm_sparc_write_external): Renamed from nlm_sparc_write_externals. Changed second argument from bfd_vma to bfd_size_type. (nlm32_sparc_backend): Adjusted for changes to fields and names. * nlmcode.h: Removed some unused code. (nlm_object_p): Don't destroy tdata pointer. Call backend_object_p function if it exists. (nlm_slurp_symbol_table): Removed unused variable rcount. Call set_public_section_func if it exists instead of checking NLM_HIBIT. (nlm_compute_section_file_positions): Account for optional_prefix_size. (nlm_write_object_contents): Account for optional_prefix_size. Removed useless variable write_reloc_func. Changed declaration and call of write_import_func. Call write_prefix_func if it exists. Removed unused variables len and temp. Call get_public_offset_func if it exists rather than setting NLM_HIBIT. * nlmswap.h: Declare functions. * bfd-in.h (uint64_typeLOW, uint64_typeHIGH): Fully parenthesize for clarity. (fprintf_vma, sprintf_vma): Use %lx, not %x. * bfd-in2.h: Rebuilt. * hosts/alphaosf.h (uint64_typeLOW, uint64_typeHIGH): Cast results to unsigned long. * config.bfd: Don't set target64 here, as the setting is ignored. * configure.in (ecoffalpha_little_vec): Set target64. * config/alphaosf.mt (TDEFINES): Removed; setting host parameters in TDEFINES is wrong. * coff-alpha.c (alpha_ecoff_get_relocated_section_contents): Remove unused variable output_section. Tue Nov 30 16:45:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * irix-core.c: New file for Irix 4 and Irix 5 core support. Functions taken out of coff-mips.c. Handle vmap type VMAPFILE. * coff-mips.c: Irix 4 core file support moved to irix-core.c. * targets.c: If IRIX_CORE defined, include irix_core_vec in target_vector. * config/irix4.mh (HDEFINES): Add -DIRIX_CORE. (HDEPFILES): Define to be irix-core.o. * config/irix5.mh (HDEFINES): Define to be -DIRIX_CORE. (HDEPFILES): Define to be irix-core.o. * Makefile.in (OPTIONAL_BACKENDS): Added irix-core.o. Removed sco-core.o, which no longer exists. (CFILES): Added all *-core.c files. Rebuilt dependencies. Wed Nov 24 02:02:41 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * elfcode.h (map_program_segments): Restore check of file_size != mem_size, but only if SHT_PROGBITS. * ecofflink.c: New file to hold ECOFF debug information linking routines. * ecoff.c (ecoff_clear_output_flags, ecoff_rel, ecoff_dump_seclet, ecoff_add_string, ecoff_get_debug): Removed. Functionality now in ecofflink.c. (ecoff_get_extr, ecoff_set_index): New functions. (ecoff_slurp_symbolic_info): Don't save raw_size. (ecoff_bfd_seclet_link): Rewrote to use ecofflink.c functions. (ecoff_compute_section_file_positions): Don't set EXEC_P just because there is a start address. (ecoff_write_object_contents): Handle external symbols here. Use ecofflink.c functions to write out debugging information. * elf32-mips.c (mips_elf_read_ecoff_info, mips_elf_get_extr, mips_elf_set_index): New functions. (mips_elf_seclet_link): Discard empty sections, the .options section and .gptab sections. Handle linking .mdebug section. * libecoff.h (ecoff_data_type): Removed raw_size and ifdbase. * libelf.h (elf_symbol_type): Added mips_extr to tc_data union. * bfd-in.h: Added prototypes for routines in ecofflink.c (some are called by gas, so they are public). * bfd-in2.h: Rebuilt. * Makefile.in (BFD_LIBS): Added ecofflink.o. (CFILES): Added ecofflink.c. (ecofflink.o): New target. Rebuilt dependencies. Mon Nov 22 22:26:42 1993 Jeffrey A. Law (law@snake.cs.utah.edu) * som.c (hppa_object_p): Also recognize SHARED_MAGIC_CNX as a valid magic number if it's been defined. Mon Nov 22 14:17:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * ecoff.c (ecoff_mkobject): Don't create .scommon section; linker no longer requires it. (ecoff_bfd_seclet_link, ecoff_sizeof_headers, ecoff_write_object_contents): Don't treat .scommon section specially. Mon Nov 22 10:54:27 1993 Fred Fish (fnf@cygnus.com) Merged changes from kev@spuds.geg.mot.com (Kevin A. Buettner): * bfd/config/delta88.mh (HDEFINES): Define this to be -DPTRACE_CORE. * bfd/config/delta88.mh (HDEPFILES): Defined to be ptrace-core.o. * bfd/ptrace-core.c: New file for dealing with core files with start with the ptrace_user structure found on BCS compliant systems. * bfd/targets.c (ptrace_core_vec): New vector. Mon Nov 22 02:33:12 1993 Jeffrey A. Law (law@snake.cs.utah.edu) * Minimal support for reading SOM fixup streams. Allows objdump -r to do something reasonable. * som.c (som_get_reloc_upper_bound): Implement. (som_canonicalize_reloc): Implement. (som_set_reloc_info, som_slurp_reloc_table): New functions. Sun Nov 21 13:46:55 1993 Ken Raeburn (raeburn@cambridge.cygnus.com) * hosts/lynx.h (FPRINTF_ALREADY_DECLARED): Define. * hosts/sparclynx.h: Include lynx.h instead of duplicating it. Fri Nov 19 14:34:04 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * coff-a29k.c (a29k_reloc): For R_IREL, don't left shift signed_value before sign extending it. Don't subtract out reloc_entry->address. This makes it compatible with what gas is generating. * elfcode.h (elf_fake_sections): Accept .sbss as the name for a SHT_NOBITS sections. (map_program_segments): Don't leave the loop after the first SHT_NOBITS section. (assign_file_positions_except_relocs): Only force sh_offset and sh_addr to match modulo maxpagesize for a section which is not SHT_NOBITS. Changed the method used to force page alignment after a SHT_NOBITS section to only do it for the last such consecutive section, and to really force page alignment. Fri Nov 19 04:02:01 1993 Ken Raeburn (raeburn@cambridge.cygnus.com) * coffcode.h (coff_slurp_symbol_table): Print more verbose message in the case of an unknown (or unhandled) storage class. * config/i386-lynx.mt (TDEFINES): FPRINTF_ALREADY_DECLARED should not be defined here, since it is a host attribute, not a target one. * config/m68k-lynx.mt, config/sparc-lynx.mt: Ditto. * coffcode.h (coff_bfd_reloc_type_lookup): Don't define if already defined. * coff-sparc.c: Define some relocations, based on ELF relocations. (enum reloc_type, bfd_coff_generic_reloc, coff_sparc_howto_table, struct coff_reloc_map, sparc_reloc_map, coff_sparc_reloc_type_lookup): Borrowed from elf32-sparc.c and elf.c, renamed. (coff_bfd_reloc_type_lookup): Define to be coff_sparc_reloc_.... (rtype2howto): Index into coff_sparc_howto_table using dst->r_type. Thu Nov 18 11:45:39 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * config.bfd (mips*-*-irix5*): New target; use mipsbelf. * configure.host (mips-sgi-irix5*) New host; use irix5 (no hosts/irix5.h created; just use std-host.h). * config/irix5.mh: New file; like irix4.mh, but don't use -G or -lmalloc. * Makefile.in: Rebuilt dependencies. * ecoffswap.h: Changed type of internal pointers for swap out functions to const *. * elf32-mips.c (mips_elf_got16_reloc): New function. Handle GOT16 correctly for assembler, but linker support not implemented. (elf_mips_howto_table): Use mips_elf_got16_reloc for GOT16. (mips_elf_sym_is_global): New function; at least on Irix 5, all non section symbols are considered global. (elf_backend_sym_is_global): Define. (mips_elf_final_write_processing): New function. Set the MIPS architecture level correctly. (elf_backend_final_write_processing): Define. (mips_elf_section_from_shdr): Handle SHT_MIPS_OPTIONS. (mips_elf_fake_sections): Set entsize of .mdebug or .reginfo section to 1. Handle .options section. (mips_elf_acom_section, mips_elf_acom_symbol, mips_elf_acom_symbol_ptr): New static variables, used to build a generic .acommon section to hold SHN_MIPS_ACOMMON symbols. (mips_elf_symbol_processing): Handle SHN_MIPS_ACOMMON symbols by putting them all in a global .acommon section. * elfcode.h (bfd_section_from_shdr): Don't dump core if target section has no ELF section data. (elf_make_sections): Set addralign of reloc section to 4. (elf_fake_sections): Likewise. (map_program_segments): Don't consider section 0. (assign_file_positions_except_relocs): Don't consider section 0. In the main loop, skip the symtab and strtab sections, since their positions are set elsewhere. (swap_out_syms): Set addralign of symtab section to 4. Set addralign of strtab sections to 1. (assign_file_positions_for_relocs): Don't consider section 0. (write_object_contents): Don't write out section 0. * libelf.h (struct elf_backend_data): Added fields elf_backend_sym_is_global and elf_backend_final_write_processing. * elf32-target.h (elf32_bed): Added corresponding initializers. * elf64-target.h (elf64_bed): Likewise. * elfcode.h (sym_is_global): Take abfd argument. Call elf_backend_sym_is_global if it is not NULL. (elf_map_symbols): Pass abfd to sym_is_global. (write_object_contents): Call elf_backend_final_write_processing if it is defined. Wed Nov 17 18:43:28 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * libecoff.h: Include coff/ecoff.h. (struct ecoff_backend_data): Move external debugging information fields into a single field pointing to an ecoff_debug_swap structure. (ecoff_data_type): Move debugging information fields into a single field pointing to an ecoff_debug_info structure. * coff-alpha.c, coff-mips.c, ecoff.c: Corresponding changes. Wed Nov 17 17:38:58 1993 Sean Eric Fagan (sef@cygnus.com) * nlmswap.h: New file to swap fixed header. Included by NLM backends. * libnlm.h (struct reloc_and_sec): Define. (struct nlm_backend_data): Add fields fixed_header_size, nlm_read_import, nlm_write_import, nlm_swap_fhdr_in, nlm_swap_fhdr_out. (nlm_fixed_header_size, nlm_read_import_func, nlm_write_import_func, nlm_swap_fixed_header_in_func, nlm_swap_fixed_header_out_func, nlm_write_external_func): New accessor macros. * nlmcode.h: Use new functions. * nlm32-i386.c: Provide new functions. * nlm32-sparc.c: New file; SPARC NLM backend. Wed Nov 17 13:56:10 1993 Stan Shebs (shebs@rtl.cygnus.com) * i386lynx.c (swap_std_reloc_in, swap_ext_reloc_in): Ignore garbage bits appearing in the upper end of symbolnums. * config/sparc-lynx.mt (TDEFINES): Add -DFPRINTF_ALREADY_DECLARED. Tue Nov 16 17:03:41 1993 Stu Grossman (grossman at cygnus.com) * lynx-core.c (lynx_core_file_p): Change bfd_zalloc to bfd_alloc. * m68klynx.c: Define core file macros. * hosts/i386lynx.h, hosts/m68klynx.h, hosts/lynx.h: Move all non-architecture specific stuff into lynx.h. Tue Nov 16 15:45:54 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * i386linux.c: Define new macro ZMAGIC_DISK_BLOCK_SIZE to 1024, and change PAGE_SIZE to 4096. Mon Nov 15 11:48:08 1993 Ken Raeburn (raeburn@rtl.cygnus.com) * Makefile.in (diststuff): New target. * VERSION: Updated. Sun Nov 14 23:33:01 1993 Jeffrey A. Law (law@snake.cs.utah.edu) * som.c (som_object_setup): Do not create dummy ".text", ".data", and ".bss" sections. (setup_sections): Do not set SEC_HAS_CONTENTS if a section's size is zero. Recognize BSS type sections and turn off SEC_LOAD and SEC_DATA (so binutils/size works). Set the correct value for a section's _raw_size. (som_slurp_symbol_table): Program entry points, and millicode are also functions. Mark them as such. Also mark L$* symbols as debugging symbols. * bfd-in2.h: Rebuilt. Sat Nov 13 15:27:15 1993 Jeffrey A. Law (law@snake.cs.utah.edu) * som.c (som_bfd_reloc_type_lookup): Add missing prototype. Returns a pointer to constant data. Delete bogus #define which made the function useless. * som.c (som_prep_for_fixups): New function. (som_write_fixups): New function. (som_write_space_strings): New function. (som_write_symbol_strings): New function. (som_begin_writing): New function. Fri Nov 12 15:29:36 1993 Jeffrey A. Law (law@snake.cs.utah.edu) * som.c (som_write_object_contents): Do not abort. Flesh out. (som_set_section_contents): Do not abort. Flesh out. * som.c (som_write_headers): New function. (som_prep_headers): New function. (som_build_and_write_symbol_table): New function. * som.c (som_sizeof_headers): Add missing prototype. (som_set_arch_mach): Do not abort. * som.c (som_count_spaces): New function. (som_count_subspaces): New function. (compare_syms): New function. (som_compute_checksum): New function. * som.c (hppa_som_gen_reloc_type): New function. (som_bfd_reloc_type_lookup): New function. * som.c (try_prev_fixup): New function. (som_reloc_skip): New function. (som_reloc_addend): New function. (som_reloc_call): New function. * som.c (som_initialize_reloc_queue): New function. (som_reloc_queue_insert): Likewise. (som_reloc_queue_fix): Likewise. (som_reloc_queue_find): Likewise. * som.c (som_hppa_howto_table): SOM howto relocation table. (hppa_som_reloc): New function. * som.c (struct reloc_queue): New structure to keep track of the last four multibyte relocations emitted. (enum pa_symbol_type): Type to fully describe the symbol types associated with .import/.export assembler directives. * som.c: Include libhppa.h * som.c (bfd_som_set_section_attributes): New function. (bfd_som_set_subsection_attributes): Likewise. (bfd_som_set_symboL_type): Likewise. (bfd_som_attach_unwind_info): Likewise. * som.h: Declare new exported functions. * som.h (struct som_symbol): Add new fields to hold additional information needed to build/write symbol tables and fixup streams. (struct som_section_data_struct): Add new fields to hold additional information needed to build/write space and subspace headers. (som_symbol_data): New accessor macro for SOM symbol information. (R_HPPA_*): Basic relocation types to be used by the assembler. Fri Nov 12 11:00:28 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * trad-core.c (trad_unix_core_file_p): If new hook TRAD_CORE_ALLOW_ANY_EXTRA_SIZE defined, then skip the check for the corefile being too big. * hosts/i386sco.h: Define it. Thu Nov 11 15:16:28 1993 Jeffrey A. Law (law@snake.cs.utah.edu) * bfd.c (struct _bfd): Add hppabsd_core_data. * targets.c (target_vector): Add hppabsd_core_vec. * hpux-core.c (hpux_core_core_file_p): Fail if an unknown core section is encountered during core section scanning. * hppabsd-core.c: New file. * config/hppabsd.mh: Enable HPPA BSD core files. * elf32-hppa.c (hppa_elf_reloc): Remove DEFUN crud. Remove code which is either commented out or ifdef'd out. Add, update and clean comments. Fix various indention and spacing problems. Handle problems related to using "ble" to jump to a stub rather than "bl" (%r31 is trashed by "ble", but not by "bl"). (NEW_INSTRUCTION): Put inside curly braces. (CURRENT_STUB_OFFSET): Fix indention problems. (hppa_elf_build_arg_reloc_stub): Fix indention and spacing problems. Add, update and clean comments. Handle "ble" %r31 lossage problems. (hppa_elf_build_long_branch_stub): Likewise. (hppa_look_for_stubs_in_section): Likewise. (hppa_elf_stub_check): Remove obsolete function. * hppa_stubs.h: Add new instructions to deal with %r31 lossage problems. Delete unused instructions. Tue Nov 9 11:40:27 1993 Stan Shebs (shebs@rtl.cygnus.com) * m68klynx.c (TARGET_IS_BIG_ENDIAN_P): Define. Tue Nov 9 11:26:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * elfcode.h (elf_object_p): Rather than looking through an array of architectures, get the ELF EM_xxx code from the backend information. Let the generic ELF target match any EM_xxx code not matched by another ELF target. Call elf_backend_object_p to let the backend do more checks and set global information. * libelf.h (struct elf_backend_data): Added elf_machine_code and elf_backend_object_p fields. (struct bfd_elf_arch_map): Removed. (bfd_elf_arch_map, bfd_elf_arch_map_size): Don't declare. * elf32-target.h, elf64-target.h: Initialize elf_machine_code field with ELF_MACHINE_CODE. Initialize elf_backend_object_p field with elf_backend_object_p (if it is defined). * elf32-gen.c, elf32-hppa.c, elf32-i386.c, elf32-i860.c, elf32-m68k.c, elf32-m88k.c, elf32-mips.c, elf32-sparc.c, elf64-gen.c (ELF_MACHINE_CODE): Defined. * elf32-mips.c: Include ecoffswap.h to get ECOFF swapping routines. (mips_elf_object_p): Set the right machine number. (mips_elf_ecoff_debug_swap): Defined. (elf_backend_object_p): Defined to be mips_elf_object_p. (elf_backend_ecoff_debug_swap): Defined to be mips_elf_ecoff_debug_swap. * elf.c (bfd_elf_arch_map, bfd_elf_arch_map_size): Removed. * libbfd-in.h (target_vector, default_vector): Declare. * libbfd.h: Rebuilt. * format.c (target_vector, default_vector): Don't declare. * elf32-mips.c (elf_mips_howto_table): Don't complain on overflow for R_MIPS_26. Correct overflow detection requires matching the upper four bits of the destination against the PC. From Ted Lemon . * bout.c (b_out_reloc_type_lookup): Return type should point to const data. * coff-i960.c (coff_i960_reloc_type_lookup): Likewise. * elf32-hppa.c (elf_hppa_reloc_type_lookup): Likewise. * mipsbsd.c (MY(reloc_howto_type_lookup)): Likewise. * coff-i386.c (coff_i386_reloc): Made howto const. * oasys.c (oasys_write_data): Made how const. * libelf.h: Added some comments. (struct elf_backend_data): Added elf_backend_ecoff_debug_swap field. Removed unused write_relocs field. * elf32-target.h: Adjusted elf_backend_data initialization accordingly. * elf64-target.h: Corrected elf_backend_data initialization to fill in all fields and to set elf_64_p to 1. Mon Nov 8 18:13:14 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * elfcode.h (bfd_section_from_shdr): Remove duplicate assignment to filepos in SHT_STRTAB case. (assign_file_position_for_section): Set BFD section filepos as well as ELF section sh_offset. * reloc.c: Use const instead of CONST. (bfd_perform_relocation): Make variable howto a const pointer. * bfd-in2.h, libbfd.h: Rebuilt. Mon Nov 8 12:19:15 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * Makefile.in (realclean): Don't remove generated headers. Reverts change of 2 Jul 1993. Mon Nov 8 06:08:31 1993 D. V. Henkel-Wallace (gumby@cirdan.cygnus.com) * configure.bfd: make unixware equivalent to sysv4. * config/i386-nlm.mt: bring in elf config; make it the default. Sun Nov 7 20:21:38 1993 Jeffrey A. Law (law@snake.cs.utah.edu) * libbfd.c (bfd_put_8): Add parens around reference to "val" argument. Fri Nov 5 21:45:09 1993 David J. Mackenzie (djm@thepub.cygnus.com) * hosts/i386mach3.h (HOST_SEGMENT_SIZE), i386mach3.c (SEGMENT_SIZE, TEXT_START_ADDR): Correct values (?). Fri Nov 5 15:17:57 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * coffcode.h (coff_write_object_contents): Zero out internal_a. Fri Nov 5 10:41:07 1993 David J. Mackenzie (djm@thepub.cygnus.com) * aoutx.h, archive.c, archures.c, bfd.c, cache.c, coffcode.h, core.c, ctor.c, format.c, init.c, libbfd.c, opncls.c, reloc.c, section.c, syms.c, targets.c: Doc cleanup (spelling, punctuation, grammar, formatting). * bfd-in2.h, libbfd.h: Rebuild. Thu Nov 4 14:46:14 1993 John Gilmore (gnu@rtl.cygnus.com) * bfd-in.h (bfd_get_cacheable, bfd_set_cacheable): New accessors. * bfd.c, opncls.c: Improve comments on file descriptor cacheing. Thu Nov 4 08:54:30 1993 Jeffrey A. Law (law@snake.cs.utah.edu) * From Pete Hoogenboom (hoogen@cs.utah.edu) * elf32-hppa.c (hppa_elf_get_section_contents): Fix logic error in last change. Always rebuild symbol extension section the first time though if output sections exist (fixes ld -r problems). Thu Nov 04 08:08:46 1993 Jeffrey Wheat (cassidy@cygnus.com) * Makefile.in: Add .PHONY for check and installcheck rules. Tue Nov 2 14:42:27 1993 Bill Cox (bill@tarkas.cygnus.com) * libbfd-in.h (artdata): Use long, not time_t for portability, at least to HPUX. File below is a derived file. Tue Nov 2 14:42:27 1993 Bill Cox (bill@tarkas.cygnus.com) * libbfd.h (artdata): Use long, not time_t for portability, at least to HPUX. Tue Nov 2 09:32:25 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * config.bfd: Use bigmips for mips*-*-bsd*. Mon Nov 1 14:30:09 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) * elfcode.h (elf_slurp_reloca_table, elf_slurp_reloc_table): Handle symbol number of zero. * reloc.c (enum bfd_reloc_code_real): Added BFD_RELOC_MIPS_LITERAL, BFD_RELOC_MIPS_GOT16, BFD_RELOC_MIPS_CALL16, BFD_RELOC_MIPS_GPREL32. * bfd-in2.h: Rebuilt. * coff-mips.c (mips_bfd_reloc_type_lookup): Handle BFD_RELOC_MIPS_LITERAL. * elf32-mips.c (mips_reloc_map): Handle new relocs. (mips_elf_hi16_reloc, mips_elf_lo16_reloc): Rearrange _gp_disp checks slightly. * aout-target.h (MY_bfd_debug_info_start, MY_bfd_debug_info_end, MY_bfd_debug_info_accumulat [sic]): Remove unused definitions. (MY_bfd_get_relocated_section_contents, MY_bfd_relax_section, MY_bfd_seclet_link): Define. (MY_bfd_reloc_type_lookup): Rename from MY_reloc_howto_type_lookup. (MY_bfd_make_debug_symbol): Rename from MY_make_debug_symbol. (MY(vec)): Use JUMP_TABLE rather than listing functions. * hp300hpux.c (MY_get_symtab, MY_get_symtab_upper_bound, MY_canonicalize_reloc, MY_write_object_contents): Don't define in terms of MY, because that causes a recusive invocation of CAT when expanded within JUMP_TABLE, and ANSI compilers don't expand recursive macros. * mipsbsd.c (MY_bfd_reloc_type_lookup): Rename from MY_reloc_howto_type_lookup, and don't define in terms of MY. (MY_canonicalize_reloc): Don't define in terms of MY. (aout_mips_little_vec, aout_mips_big_vec): Use JUMP_TABLE rather than listing functions. Mon Nov 1 09:12:25 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * config.bfd: Use m68k-elf for m68*-*-sysv4*. See file ChangeLog.1 Local Variables: mode: indented-text left-margin: 8 fill-column: 74 version-control: never End: