From b702665739598ec762119fda6dec4a09adc48fc0 Mon Sep 17 00:00:00 2001 From: Andrew Cagney Date: Mon, 10 Jan 2005 16:14:50 +0000 Subject: Index: arm/ChangeLog 2005-01-07 Andrew Cagney * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: ChangeLog 2005-01-07 Andrew Cagney * configure.ac: Replace configure.in. Requires autoconf 2.59 and correctly calls AC_CONFIG_SUBDIRS. * configure: Re-generate. Index: common/ChangeLog 2005-01-07 Andrew Cagney * configure.ac: Rename configure.in, require autoconf 2.59. * aclocal.m4 (SIM_AC_COMMON): Delete call to AC_CONFIG_AUX_DIR. * configure: Re-generate. Index: d10v/ChangeLog 2005-01-07 Andrew Cagney * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: erc32/ChangeLog 2005-01-07 Andrew Cagney * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: frv/ChangeLog 2005-01-07 Andrew Cagney * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: h8300/ChangeLog 2005-01-07 Andrew Cagney * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: igen/ChangeLog 2005-01-07 Andrew Cagney * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: m32r/ChangeLog 2005-01-07 Andrew Cagney * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: m68hc11/ChangeLog 2005-01-07 Andrew Cagney * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: mcore/ChangeLog 2005-01-07 Andrew Cagney * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: mips/ChangeLog 2005-01-07 Andrew Cagney * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: mn10300/ChangeLog 2005-01-07 Andrew Cagney * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: ppc/ChangeLog 2005-01-07 Andrew Cagney * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: sh/ChangeLog 2005-01-07 Andrew Cagney * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: testsuite/d10v-elf/ChangeLog 2005-01-07 Andrew Cagney * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: testsuite/frv-elf/ChangeLog 2005-01-07 Andrew Cagney * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: testsuite/m32r-elf/ChangeLog 2005-01-07 Andrew Cagney * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: testsuite/mips64el-elf/ChangeLog 2005-01-07 Andrew Cagney * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: testsuite/ChangeLog 2005-01-07 Andrew Cagney * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. Index: v850/ChangeLog 2005-01-07 Andrew Cagney * configure.ac: Rename configure.in, require autoconf 2.59. * configure: Re-generate. --- sim/ppc/ChangeLog | 5 + sim/ppc/configure | 11176 +++++++++++++++++++++++++++++++++++-------------- sim/ppc/configure.ac | 790 ++++ sim/ppc/configure.in | 790 ---- 4 files changed, 8901 insertions(+), 3860 deletions(-) create mode 100644 sim/ppc/configure.ac delete mode 100644 sim/ppc/configure.in (limited to 'sim/ppc') diff --git a/sim/ppc/ChangeLog b/sim/ppc/ChangeLog index 9877281..4ff3bd2 100644 --- a/sim/ppc/ChangeLog +++ b/sim/ppc/ChangeLog @@ -1,3 +1,8 @@ +2005-01-07 Andrew Cagney + + * configure.ac: Rename configure.in, require autoconf 2.59. + * configure: Re-generate. + 2005-01-03 Andreas Schwab * Makefile.in (hw_com.o, hw_eeprom.o): Depend on diff --git a/sim/ppc/configure b/sim/ppc/configure index c687e66..d372138 100755 --- a/sim/ppc/configure +++ b/sim/ppc/configure @@ -1,223 +1,325 @@ #! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.59. +# +# Copyright (C) 2003 Free Software Foundation, Inc. +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi +DUALCASE=1; export DUALCASE # for MKS sh +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi +rm -f conf$$ conf$$.exe conf$$.file +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.file +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi +as_executable_p="test -f" +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" +# IFS +# We need space, tab and new line, in precisely that order. +as_nl=' +' +IFS=" $as_nl" +# CDPATH. +$as_unset CDPATH +# Name of the host. +# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` +exec 6>&1 - - - - - - - - - - - - -sim_inline="-DDEFAULT_INLINE=0" - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -# This file is derived from `gettext.m4'. The difference is that the -# included macros assume Cygnus-style source and build trees. - -# Macro to add for using GNU gettext. -# Ulrich Drepper , 1995. -# -# This file file be copied and used freely without restrictions. It can -# be used in projects which are not available under the GNU Public License -# but which still want to provide support for the GNU gettext functionality. -# Please note that the actual code is *not* freely available. - -# serial 3 - - - - - -# Search path for a program which passes the given test. -# Ulrich Drepper , 1996. # -# This file file be copied and used freely without restrictions. It can -# be used in projects which are not available under the GNU Public License -# but which still want to provide support for the GNU gettext functionality. -# Please note that the actual code is *not* freely available. - -# serial 1 - - - -# Check whether LC_MESSAGES is available in . -# Ulrich Drepper , 1995. +# Initializations. # -# This file file be copied and used freely without restrictions. It can -# be used in projects which are not available under the GNU Public License -# but which still want to provide support for the GNU gettext functionality. -# Please note that the actual code is *not* freely available. - -# serial 1 - - - - - +ac_default_prefix=/usr/local +ac_config_libobj_dir=. +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} -# Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.13 -# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. -# -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. +# Maximum number of lines to put in a shell here document. +# This variable seems obsolete. It should probably be removed, and +# only ac_max_sed_lines should be used. +: ${ac_max_here_lines=38} + +# Identity of this package. +PACKAGE_NAME= +PACKAGE_TARNAME= +PACKAGE_VERSION= +PACKAGE_STRING= +PACKAGE_BUGREPORT= + +ac_unique_file="Makefile.in" +# Factoring default headers for most tests. +ac_includes_default="\ +#include +#if HAVE_SYS_TYPES_H +# include +#endif +#if HAVE_SYS_STAT_H +# include +#endif +#if STDC_HEADERS +# include +# include +#else +# if HAVE_STDLIB_H +# include +# endif +#endif +#if HAVE_STRING_H +# if !STDC_HEADERS && HAVE_MEMORY_H +# include +# endif +# include +#endif +#if HAVE_STRINGS_H +# include +#endif +#if HAVE_INTTYPES_H +# include +#else +# if HAVE_STDINT_H +# include +# endif +#endif +#if HAVE_UNISTD_H +# include +#endif" -# Defaults: -ac_help= -ac_default_prefix=/usr/local -# Any additions from configure.in: -ac_help="$ac_help - --disable-nls do not use Native Language Support" -ac_help="$ac_help - --with-included-gettext use the GNU gettext library included here" -ac_help="$ac_help - --enable-sim-alignment=align Specify strict or nonstrict alignment." -ac_help="$ac_help - --enable-sim-assert Specify whether to perform random assertions." -ac_help="$ac_help - --enable-sim-bitsize=n Specify target bitsize (32 or 64)." -ac_help="$ac_help - --enable-sim-bswap Use the BSWAP instruction on Intel 486s and Pentiums." -ac_help="$ac_help - --enable-sim-cflags=opts Extra CFLAGS for use in building simulator" -ac_help="$ac_help - --enable-sim-config=file Override default config file" -ac_help="$ac_help - --enable-sim-decode-mechanism=which Specify the instruction decode mechanism." -ac_help="$ac_help - --enable-sim-default-model=which Specify default PowerPC to model." -ac_help="$ac_help - --enable-sim-duplicate Expand (duplicate) semantic functions." -ac_help="$ac_help - --enable-sim-endian=endian Specify target byte endian orientation." -ac_help="$ac_help - --enable-sim-env=env Specify target environment (operating, virtual, user)." -ac_help="$ac_help - --enable-sim-filter=rule Specify filter rules." -ac_help="$ac_help - --enable-sim-float Specify whether the target has hard, soft, altivec or e500 floating point." -ac_help="$ac_help - --enable-sim-hardware=list Specify the hardware to be included in the build." -ac_help="$ac_help - --enable-sim-hostbitsize=32|64 Specify host bitsize (32 or 64)." -ac_help="$ac_help - --enable-sim-hostendian=end Specify host byte endian orientation." -ac_help="$ac_help - --enable-sim-icache=size Specify instruction-decode cache size and type." -ac_help="$ac_help - --enable-sim-inline=inlines Specify which functions should be inlined." -ac_help="$ac_help - --enable-sim-jump Jump between semantic code (instead of call/return)." -ac_help="$ac_help - --enable-sim-line-nr=opts Generate extra CPP code that references source rather than generated code" -ac_help="$ac_help - --enable-sim-model=which Specify PowerPC to model." -ac_help="$ac_help - --enable-sim-model-issue Specify whether to simulate model specific actions" -ac_help="$ac_help - --enable-sim-monitor=mon Specify whether to enable monitoring events." -ac_help="$ac_help - --enable-sim-opcode=which Override default opcode lookup." -ac_help="$ac_help - --enable-sim-packages=list Specify the packages to be included in the build." -ac_help="$ac_help - --enable-sim-regparm=nr-parm Pass parameters in registers instead of on the stack - x86/GCC specific." -ac_help="$ac_help - --enable-sim-reserved-bits Specify whether to check reserved bits in instruction." -ac_help="$ac_help - --enable-sim-smp=n Specify number of processors to configure for." -ac_help="$ac_help - --enable-sim-stdcall=type Use an alternative function call/return mechanism - x86/GCC specific." -ac_help="$ac_help - --enable-sim-stdio Specify whether to use stdio for console input/output." -ac_help="$ac_help - --enable-sim-switch Use a switch instead of a table for instruction call." -ac_help="$ac_help - --enable-sim-timebase Specify whether the PPC timebase is supported." -ac_help="$ac_help - --enable-sim-trace Specify whether tracing is supported." -ac_help="$ac_help - --enable-sim-warnings=opts Extra CFLAGS for turning on compiler warnings except for idecode.o, semantics.o and psim.o" -ac_help="$ac_help - --enable-sim-xor-endian=n Specify number bytes involved in PowerPC XOR bi-endian mode (default 8)." +ac_subst_vars='sim_environment sim_alignment sim_assert sim_bitsize sim_endian sim_hostendian sim_float sim_scache sim_default_model sim_hw_cflags sim_hw_objs sim_hw sim_inline sim_packages sim_regparm sim_reserved_bits sim_smp sim_stdcall sim_xor_endian WARN_CFLAGS WERROR_CFLAGS SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT SET_MAKE RANLIB ac_ct_RANLIB CPP EGREP ALLOCA USE_NLS MSGFMT GMSGFMT XGETTEXT USE_INCLUDED_LIBINTL CATALOGS CATOBJEXT DATADIRNAME GMOFILES INSTOBJEXT INTLDEPS INTLLIBS INTLOBJS POFILES POSUB INCLUDE_LOCALE_H GT_NO GT_YES MKINSTALLDIRS l build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os LIBOBJS CC_FOR_BUILD HDEFINES AR sim_cflags sim_warnings sim_line_nr sim_config sim_opcode sim_switch sim_dup sim_decode_mechanism sim_jump sim_filter sim_icache sim_hw_src sim_hw_obj sim_pk_src sim_pk_obj sim_bswap sim_igen_smp sim_hostbitsize sim_env sim_timebase sim_trace sim_reserved sim_monitor sim_model sim_model_issue sim_stdio sim_termio sim_devzero sim_callback sim_targ_vals sim_fpu_cflags sim_fpu LTLIBOBJS' +ac_subst_files='' # Initialize some variables set by options. +ac_init_help= +ac_init_version=false # The variables have the same names as the options, with # dashes changed to underlines. -build=NONE -cache_file=./config.cache +cache_file=/dev/null exec_prefix=NONE -host=NONE no_create= -nonopt=NONE no_recursion= prefix=NONE program_prefix=NONE @@ -225,12 +327,16 @@ program_suffix=NONE program_transform_name=s,x,x, silent= site= -sitefile= srcdir= -target=NONE verbose= x_includes=NONE x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' @@ -244,17 +350,9 @@ oldincludedir='/usr/include' infodir='${prefix}/info' mandir='${prefix}/man' -# Initialize some other variables. -subdirs= -MFLAGS= MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} -# Maximum number of lines to put in a shell here document. -ac_max_here_lines=12 - ac_prev= for ac_option do - # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval "$ac_prev=\$ac_option" @@ -262,59 +360,59 @@ do continue fi - case "$ac_option" in - -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; - *) ac_optarg= ;; - esac + ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` # Accept the important Cygnus configure options, so we can diagnose typos. - case "$ac_option" in + case $ac_option in -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir="$ac_optarg" ;; + bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) - ac_prev=build ;; + ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build="$ac_optarg" ;; + build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file="$ac_optarg" ;; + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ | --da=*) - datadir="$ac_optarg" ;; + datadir=$ac_optarg ;; -disable-* | --disable-*) - ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` + ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. - if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then - { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } - fi - ac_feature=`echo $ac_feature| sed 's/-/_/g'` - eval "enable_${ac_feature}=no" ;; + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + eval "enable_$ac_feature=no" ;; -enable-* | --enable-*) - ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` + ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. - if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then - { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } - fi - ac_feature=`echo $ac_feature| sed 's/-/_/g'` - case "$ac_option" in - *=*) ;; + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; *) ac_optarg=yes ;; esac - eval "enable_${ac_feature}='$ac_optarg'" ;; + eval "enable_$ac_feature='$ac_optarg'" ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ @@ -323,96 +421,47 @@ do -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) - exec_prefix="$ac_optarg" ;; + exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; - -help | --help | --hel | --he) - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat << EOF -Usage: configure [options] [host] -Options: [defaults in brackets after descriptions] -Configuration: - --cache-file=FILE cache test results in FILE - --help print this message - --no-create do not create output files - --quiet, --silent do not print \`checking...' messages - --site-file=FILE use FILE as the site file - --version print the version of autoconf that created configure -Directory and file names: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [same as prefix] - --bindir=DIR user executables in DIR [EPREFIX/bin] - --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] - --libexecdir=DIR program executables in DIR [EPREFIX/libexec] - --datadir=DIR read-only architecture-independent data in DIR - [PREFIX/share] - --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data in DIR - [PREFIX/com] - --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] - --libdir=DIR object code libraries in DIR [EPREFIX/lib] - --includedir=DIR C header files in DIR [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] - --infodir=DIR info documentation in DIR [PREFIX/info] - --mandir=DIR man documentation in DIR [PREFIX/man] - --srcdir=DIR find the sources in DIR [configure dir or ..] - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM - run sed PROGRAM on installed program names -EOF - cat << EOF -Host type: - --build=BUILD configure for building on BUILD [BUILD=HOST] - --host=HOST configure for HOST [guessed] - --target=TARGET configure for TARGET [TARGET=HOST] -Features and packages: - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --x-includes=DIR X include files are in DIR - --x-libraries=DIR X library files are in DIR -EOF - if test -n "$ac_help"; then - echo "--enable and --with options recognized:$ac_help" - fi - exit 0 ;; + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; -host | --host | --hos | --ho) - ac_prev=host ;; + ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) - host="$ac_optarg" ;; + host_alias=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir="$ac_optarg" ;; + includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir="$ac_optarg" ;; + infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir="$ac_optarg" ;; + libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) - libexecdir="$ac_optarg" ;; + libexecdir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst \ @@ -421,19 +470,19 @@ EOF -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* \ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) - localstatedir="$ac_optarg" ;; + localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir="$ac_optarg" ;; + mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) + | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ @@ -447,26 +496,26 @@ EOF -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir="$ac_optarg" ;; + oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix="$ac_optarg" ;; + prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix="$ac_optarg" ;; + program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix="$ac_optarg" ;; + program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ @@ -483,7 +532,7 @@ EOF | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name="$ac_optarg" ;; + program_transform_name=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) @@ -493,7 +542,7 @@ EOF ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) - sbindir="$ac_optarg" ;; + sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ @@ -504,63 +553,57 @@ EOF | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) - sharedstatedir="$ac_optarg" ;; + sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) - site="$ac_optarg" ;; - - -site-file | --site-file | --site-fil | --site-fi | --site-f) - ac_prev=sitefile ;; - -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) - sitefile="$ac_optarg" ;; + site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir="$ac_optarg" ;; + srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir="$ac_optarg" ;; + sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target ;; + ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target="$ac_optarg" ;; + target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; - -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.13" - exit 0 ;; + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; -with-* | --with-*) - ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` + ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. - if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then - { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } - fi + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } ac_package=`echo $ac_package| sed 's/-/_/g'` - case "$ac_option" in - *=*) ;; + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; *) ac_optarg=yes ;; esac - eval "with_${ac_package}='$ac_optarg'" ;; + eval "with_$ac_package='$ac_optarg'" ;; -without-* | --without-*) - ac_package=`echo $ac_option|sed -e 's/-*without-//'` + ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. - if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then - { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } - fi - ac_package=`echo $ac_package| sed 's/-/_/g'` - eval "with_${ac_package}=no" ;; + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package | sed 's/-/_/g'` + eval "with_$ac_package=no" ;; --x) # Obsolete; use --with-x. @@ -571,99 +614,110 @@ EOF ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes="$ac_optarg" ;; + x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries="$ac_optarg" ;; + x_libraries=$ac_optarg ;; - -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } + -*) { echo "$as_me: error: unrecognized option: $ac_option +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } ;; + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } + ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` + eval "$ac_envvar='$ac_optarg'" + export $ac_envvar ;; + *) - if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then - echo "configure: warning: $ac_option: invalid host type" 1>&2 - fi - if test "x$nonopt" != xNONE; then - { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } - fi - nonopt="$ac_option" + # FIXME: should be removed in autoconf 3.0. + echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ;; esac done if test -n "$ac_prev"; then - { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } -fi - -trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 - -# File descriptor usage: -# 0 standard input -# 1 file creation -# 2 errors and warnings -# 3 some systems may open it to /dev/tty -# 4 used on the Kubota Titan -# 6 checking for... messages and results -# 5 compiler messages saved in config.log -if test "$silent" = yes; then - exec 6>/dev/null -else - exec 6>&1 + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + { echo "$as_me: error: missing argument to $ac_option" >&2 + { (exit 1); exit 1; }; } fi -exec 5>./config.log -echo "\ -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. -" 1>&5 +# Be sure to have absolute paths. +for ac_var in exec_prefix prefix +do + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* | NONE | '' ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; + esac +done -# Strip out --no-create and --no-recursion so they do not pile up. -# Also quote any args containing shell metacharacters. -ac_configure_args= -for ac_arg +# Be sure to have absolute paths. +for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ + localstatedir libdir includedir oldincludedir infodir mandir do - case "$ac_arg" in - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) ;; - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) - ac_configure_args="$ac_configure_args '$ac_arg'" ;; - *) ac_configure_args="$ac_configure_args $ac_arg" ;; + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; esac done -# NLS nuisances. -# Only set these to C if already set. These must not be set unconditionally -# because not all systems understand e.g. LANG=C (notably SCO). -# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! -# Non-C LC_CTYPE values break the ctype check. -if test "${LANG+set}" = set; then LANG=C; export LANG; fi -if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi -if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi -if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used." >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -rf conftest* confdefs.h -# AIX cpp loses on an empty file, so make sure it contains at least a newline. -echo > confdefs.h +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null -# A filename unique to this package, relative to the directory that -# configure is in, which we can look for to find out if srcdir is correct. -ac_unique_file=Makefile.in # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then its parent. - ac_prog=$0 - ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` - test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. + ac_confdir=`(dirname "$0") 2>/dev/null || +$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$0" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` srcdir=$ac_confdir if test ! -r $srcdir/$ac_unique_file; then srcdir=.. @@ -673,354 +727,1376 @@ else fi if test ! -r $srcdir/$ac_unique_file; then if test "$ac_srcdir_defaulted" = yes; then - { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 + { (exit 1); exit 1; }; } else - { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } fi fi -srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` +(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || + { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 + { (exit 1); exit 1; }; } +srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` +ac_env_build_alias_set=${build_alias+set} +ac_env_build_alias_value=$build_alias +ac_cv_env_build_alias_set=${build_alias+set} +ac_cv_env_build_alias_value=$build_alias +ac_env_host_alias_set=${host_alias+set} +ac_env_host_alias_value=$host_alias +ac_cv_env_host_alias_set=${host_alias+set} +ac_cv_env_host_alias_value=$host_alias +ac_env_target_alias_set=${target_alias+set} +ac_env_target_alias_value=$target_alias +ac_cv_env_target_alias_set=${target_alias+set} +ac_cv_env_target_alias_value=$target_alias +ac_env_CC_set=${CC+set} +ac_env_CC_value=$CC +ac_cv_env_CC_set=${CC+set} +ac_cv_env_CC_value=$CC +ac_env_CFLAGS_set=${CFLAGS+set} +ac_env_CFLAGS_value=$CFLAGS +ac_cv_env_CFLAGS_set=${CFLAGS+set} +ac_cv_env_CFLAGS_value=$CFLAGS +ac_env_LDFLAGS_set=${LDFLAGS+set} +ac_env_LDFLAGS_value=$LDFLAGS +ac_cv_env_LDFLAGS_set=${LDFLAGS+set} +ac_cv_env_LDFLAGS_value=$LDFLAGS +ac_env_CPPFLAGS_set=${CPPFLAGS+set} +ac_env_CPPFLAGS_value=$CPPFLAGS +ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} +ac_cv_env_CPPFLAGS_value=$CPPFLAGS +ac_env_CPP_set=${CPP+set} +ac_env_CPP_value=$CPP +ac_cv_env_CPP_set=${CPP+set} +ac_cv_env_CPP_value=$CPP -# Prefer explicitly selected file to automatically selected ones. -if test -z "$sitefile"; then - if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" - fi - fi -else - CONFIG_SITE="$sitefile" -fi -for ac_site_file in $CONFIG_SITE; do - if test -r "$ac_site_file"; then - echo "loading site script $ac_site_file" - . "$ac_site_file" - fi -done +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures this package to adapt to many kinds of systems. -if test -r "$cache_file"; then - echo "loading cache $cache_file" - . $cache_file -else - echo "creating cache $cache_file" - > $cache_file -fi +Usage: $0 [OPTION]... [VAR=VALUE]... -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -ac_exeext= -ac_objext=o -if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then - # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. - if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then - ac_n= ac_c=' -' ac_t=' ' - else - ac_n=-n ac_c= ac_t= - fi -else - ac_n= ac_c='\c' ac_t= -fi +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. +Defaults for the options are specified in brackets. +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +_ACEOF + + cat <<_ACEOF +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] -ac_aux_dir= -for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do - if test -f $ac_dir/install-sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f $ac_dir/install.sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - fi -done -if test -z "$ac_aux_dir"; then - { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; } -fi -ac_config_guess=$ac_aux_dir/config.guess -ac_config_sub=$ac_aux_dir/config.sub -ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# ./install, which can be erroneously created by make from ./install.sh. -echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:765: checking for a BSD compatible install" >&5 -if test -z "$INSTALL"; then -if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" - for ac_dir in $PATH; do - # Account for people who put trailing slashes in PATH elements. - case "$ac_dir/" in - /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - if test -f $ac_dir/$ac_prog; then - if test $ac_prog = install && - grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - else - ac_cv_path_install="$ac_dir/$ac_prog -c" - break 2 - fi - fi - done - ;; - esac - done - IFS="$ac_save_IFS" +For better control, use the options below. +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data [PREFIX/share] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --infodir=DIR info documentation [PREFIX/info] + --mandir=DIR man documentation [PREFIX/man] +_ACEOF + + cat <<\_ACEOF + +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] + --target=TARGET configure for building compilers for TARGET [HOST] +_ACEOF fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL="$ac_cv_path_install" - else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the path is relative. - INSTALL="$ac_install_sh" - fi -fi -echo "$ac_t""$INSTALL" 1>&6 -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' +if test -n "$ac_init_help"; then -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + cat <<\_ACEOF -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' +Optional Features: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --disable-nls do not use Native Language Support + --enable-sim-alignment=align Specify strict or nonstrict alignment. + --enable-sim-assert Specify whether to perform random assertions. + --enable-sim-bitsize=n Specify target bitsize (32 or 64). + --enable-sim-bswap Use the BSWAP instruction on Intel 486s and Pentiums. + --enable-sim-cflags=opts Extra CFLAGS for use in building simulator + --enable-sim-config=file Override default config file + --enable-sim-decode-mechanism=which Specify the instruction decode mechanism. + --enable-sim-default-model=which Specify default PowerPC to model. + --enable-sim-duplicate Expand (duplicate) semantic functions. + --enable-sim-endian=endian Specify target byte endian orientation. + --enable-sim-env=env Specify target environment (operating, virtual, user). + --enable-sim-filter=rule Specify filter rules. + --enable-sim-float Specify whether the target has hard, soft, altivec or e500 floating point. + --enable-sim-hardware=list Specify the hardware to be included in the build. + --enable-sim-hostbitsize=32|64 Specify host bitsize (32 or 64). + --enable-sim-hostendian=end Specify host byte endian orientation. + --enable-sim-icache=size Specify instruction-decode cache size and type. + --enable-sim-inline=inlines Specify which functions should be inlined. + --enable-sim-jump Jump between semantic code (instead of call/return). + --enable-sim-line-nr=opts Generate extra CPP code that references source rather than generated code + --enable-sim-model=which Specify PowerPC to model. + --enable-sim-model-issue Specify whether to simulate model specific actions + --enable-sim-monitor=mon Specify whether to enable monitoring events. + --enable-sim-opcode=which Override default opcode lookup. + --enable-sim-packages=list Specify the packages to be included in the build. + --enable-sim-regparm=nr-parm Pass parameters in registers instead of on the stack - x86/GCC specific. + --enable-sim-reserved-bits Specify whether to check reserved bits in instruction. + --enable-sim-smp=n Specify number of processors to configure for. + --enable-sim-stdcall=type Use an alternative function call/return mechanism - x86/GCC specific. + --enable-sim-stdio Specify whether to use stdio for console input/output. + --enable-sim-switch Use a switch instead of a table for instruction call. + --enable-sim-timebase Specify whether the PPC timebase is supported. + --enable-sim-trace Specify whether tracing is supported. + --enable-sim-warnings=opts Extra CFLAGS for turning on compiler warnings except for idecode.o, semantics.o and psim.o + --enable-sim-xor-endian=n Specify number bytes involved in PowerPC XOR bi-endian mode (default 8). + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-included-gettext use the GNU gettext library included here -# Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:820: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have + headers in a nonstandard directory + CPP C preprocessor + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +_ACEOF +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + ac_popdir=`pwd` + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d $ac_dir || continue + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac + +# Do not use `cd foo && pwd` to compute absolute paths, because +# the directories may not exist. +case `pwd` in +.) ac_abs_builddir="$ac_dir";; +*) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_builddir=${ac_top_builddir}.;; +*) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_srcdir=$ac_srcdir;; +*) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_srcdir=$ac_top_srcdir;; +*) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; +esac + + cd $ac_dir + # Check for guested configure; otherwise get Cygnus style configure. + if test -f $ac_srcdir/configure.gnu; then + echo + $SHELL $ac_srcdir/configure.gnu --help=recursive + elif test -f $ac_srcdir/configure; then + echo + $SHELL $ac_srcdir/configure --help=recursive + elif test -f $ac_srcdir/configure.ac || + test -f $ac_srcdir/configure.in; then + echo + $ac_configure --help + else + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi + cd $ac_popdir + done +fi + +test -n "$ac_init_help" && exit 0 +if $ac_init_version; then + cat <<\_ACEOF + +Copyright (C) 2003 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit 0 +fi +exec 5>config.log +cat >&5 <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by $as_me, which was +generated by GNU Autoconf 2.59. Invocation command line was + + $ $0 $@ + +_ACEOF +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +hostinfo = `(hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + echo "PATH: $as_dir" +done + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_sep= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 2) + ac_configure_args1="$ac_configure_args1 '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" + # Get rid of the leading space. + ac_sep=" " + ;; + esac + done +done +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Be sure not to use single quotes in there, as some shells, +# such as our DU 5.0 friend, will then `close' the trap. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + cat <<\_ASBOX +## ---------------- ## +## Cache variables. ## +## ---------------- ## +_ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +{ + (set) 2>&1 | + case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in + *ac_space=\ *) + sed -n \ + "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" + ;; + *) + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; +} + echo + + cat <<\_ASBOX +## ----------------- ## +## Output variables. ## +## ----------------- ## +_ASBOX + echo + for ac_var in $ac_subst_vars + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +## ------------- ## +## Output files. ## +## ------------- ## +_ASBOX + echo + for ac_var in $ac_subst_files + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + fi + + if test -s confdefs.h; then + cat <<\_ASBOX +## ----------- ## +## confdefs.h. ## +## ----------- ## +_ASBOX + echo + sed "/^$/d" confdefs.h | sort + echo + fi + test "$ac_signal" != 0 && + echo "$as_me: caught signal $ac_signal" + echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core && + rm -rf conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status + ' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it contains at least a newline. +echo >confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer explicitly selected file to automatically selected ones. +if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi +fi +for ac_site_file in $CONFIG_SITE; do + if test -r "$ac_site_file"; then + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 +echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 +echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . $cache_file;; + *) . ./$cache_file;; + esac + fi +else + { echo "$as_me:$LINENO: creating cache $cache_file" >&5 +echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in `(set) 2>&1 | + sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val="\$ac_cv_env_${ac_var}_value" + eval ac_new_val="\$ac_env_${ac_var}_value" + case $ac_old_set,$ac_new_set in + set,) + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 +echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 +echo "$as_me: former value: $ac_old_val" >&2;} + { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 +echo "$as_me: current value: $ac_new_val" >&2;} + ac_cache_corrupted=: + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 +echo "$as_me: error: changes in the environment can compromise the build" >&2;} + { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + + + + + + + + + + + + + + + + + +ac_aux_dir= +for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do + if test -f $ac_dir/install-sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f $ac_dir/install.sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f $ac_dir/shtool; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 +echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} + { (exit 1); exit 1; }; } +fi +ac_config_guess="$SHELL $ac_aux_dir/config.guess" +ac_config_sub="$SHELL $ac_aux_dir/config.sub" +ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 +if test -z "$INSTALL"; then +if test "${ac_cv_path_install+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in + ./ | .// | /cC/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + done + done + ;; +esac +done + + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. We don't cache a + # path for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the path is relative. + INSTALL=$ac_install_sh + fi +fi +echo "$as_me:$LINENO: result: $INSTALL" >&5 +echo "${ECHO_T}$INSTALL" >&6 + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="gcc" - break - fi - done - IFS="$ac_save_ifs" +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + fi fi -CC="$ac_cv_prog_CC" +CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 else - echo "$ac_t""no" 1>&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" fi if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:850: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" +fi + +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - break - fi - done - IFS="$ac_save_ifs" +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift - if test $# -gt 0; then + if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift - set dummy "$ac_dir/$ac_word" "$@" - shift - ac_cv_prog_CC="$@" + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi -CC="$ac_cv_prog_CC" +CC=$ac_cv_prog_CC if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 else - echo "$ac_t""no" 1>&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi - if test -z "$CC"; then - case "`uname -s`" in - *win32* | *WIN32*) - # Extract the first word of "cl", so it can be a program name with args. -set dummy cl; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:901: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="cl" - break +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$ac_ct_CC" && break +done + + CC=$ac_ct_CC +fi + +fi + + +test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&5 +echo "$as_me: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + +# Provide some information about the compiler. +echo "$as_me:$LINENO:" \ + "checking for C compiler version" >&5 +ac_compiler=`set X $ac_compile; echo $2` +{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 + (eval $ac_compiler --version &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 + (eval $ac_compiler -v &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 + (eval $ac_compiler -V &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 +ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` +if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 + (eval $ac_link_default) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Find the output, starting from the most likely. This scheme is +# not robust to junk in `.', hence go to wildcards (a.*) only as a last +# resort. + +# Be careful to initialize this variable, since it used to be cached. +# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. +ac_cv_exeext= +# b.out is created by i960 compilers. +for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) + ;; + conftest.$ac_ext ) + # This is the source file. + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + # FIXME: I believe we export ac_cv_exeext for Libtool, + # but it would be cool to find out if it's true. Does anybody + # maintain Libtool? --akim. + export ac_cv_exeext + break;; + * ) + break;; + esac +done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: C compiler cannot create executables +See \`config.log' for more details." >&5 +echo "$as_me: error: C compiler cannot create executables +See \`config.log' for more details." >&2;} + { (exit 77); exit 77; }; } +fi + +ac_exeext=$ac_cv_exeext +echo "$as_me:$LINENO: result: $ac_file" >&5 +echo "${ECHO_T}$ac_file" >&6 + +# Check the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 +# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 +# If not cross compiling, check that we can run a simple program. +if test "$cross_compiling" != yes; then + if { ac_try='./$ac_file' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { echo "$as_me:$LINENO: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } fi - done - IFS="$ac_save_ifs" -fi + fi fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 +echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + +rm -f a.out a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +# Check the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 +echo "$as_me:$LINENO: result: $cross_compiling" >&5 +echo "${ECHO_T}$cross_compiling" >&6 + +echo "$as_me:$LINENO: checking for suffix of executables" >&5 +echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + export ac_cv_exeext + break;; + * ) break;; + esac +done else - echo "$ac_t""no" 1>&6 -fi - ;; - esac - fi - test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } + { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:933: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +rm -f conftest$ac_cv_exeext +echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +echo "${ECHO_T}$ac_cv_exeext" >&6 -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -cat > conftest.$ac_ext << EOF - -#line 944 "configure" -#include "confdefs.h" - -main(){return(0);} -EOF -if { (eval echo configure:949: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - ac_cv_prog_cc_works=yes - # If we can't run a trivial program, we are probably using a cross compiler. - if (./conftest; exit) 2>/dev/null; then - ac_cv_prog_cc_cross=no - else - ac_cv_prog_cc_cross=yes - fi +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +echo "$as_me:$LINENO: checking for suffix of object files" >&5 +echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 +if test "${ac_cv_objext+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_prog_cc_works=no -fi -rm -fr conftest* -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 -echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 -if test $ac_cv_prog_cc_works = no; then - { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } +{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:975: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 -echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 -cross_compiling=$ac_cv_prog_cc_cross -echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:980: checking whether we are using GNU C" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +echo "${ECHO_T}$ac_cv_objext" >&6 +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 +if test "${ac_cv_c_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat > conftest.c <conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me #endif -EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:989: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then - ac_cv_prog_gcc=yes -else - ac_cv_prog_gcc=no -fi -fi -echo "$ac_t""$ac_cv_prog_gcc" 1>&6 + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_compiler_gnu=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_compiler_gnu=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 +GCC=`test $ac_compiler_gnu = yes && echo yes` +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +CFLAGS="-g" +echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -if test $ac_cv_prog_gcc = yes; then - GCC=yes -else - GCC= -fi +int +main () +{ -ac_test_CFLAGS="${CFLAGS+set}" -ac_save_CFLAGS="$CFLAGS" -CFLAGS= -echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1008: checking whether ${CC-cc} accepts -g" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - echo 'void f(){}' > conftest.c -if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_prog_cc_g=yes else - ac_cv_prog_cc_g=no -fi -rm -f conftest* + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 +ac_cv_prog_cc_g=no fi - -echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" + CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" @@ -1034,214 +2110,835 @@ else CFLAGS= fi fi +echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 +echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_prog_cc_stdc=no +ac_save_CC=$CC +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std1 is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std1. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +# Don't try gcc -ansi; that turns off useful extensions and +# breaks some systems' header files. +# AIX -qlanglvl=ansi +# Ultrix and OSF/1 -std1 +# HP-UX 10.20 and later -Ae +# HP-UX older versions -Aa -D_HPUX_SOURCE +# SVR4 -Xc -D__EXTENSIONS__ +for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_stdc=$ac_arg +break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext +done +rm -f conftest.$ac_ext conftest.$ac_objext +CC=$ac_save_CC -# Put a plausible default for CC_FOR_BUILD in Makefile. -if test "x$cross_compiling" = "xno"; then - CC_FOR_BUILD='$(CC)' -else - CC_FOR_BUILD=gcc fi -ALL_LINGUAS= -echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:1049: checking how to run the C preprocessor" >&5 -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then -if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - # This must be in double quotes, not single quotes, because CPP may get - # substituted into the Makefile and "${CC-cc}" will confuse make. - CPP="${CC-cc} -E" - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. - cat > conftest.$ac_ext < -Syntax Error -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1070: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - : -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - CPP="${CC-cc} -E -traditional-cpp" - cat > conftest.$ac_ext < -Syntax Error -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1087: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - : -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - CPP="${CC-cc} -nologo -E" - cat > conftest.$ac_ext < -Syntax Error -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1104: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then +case "x$ac_cv_prog_cc_stdc" in + x|xno) + echo "$as_me:$LINENO: result: none needed" >&5 +echo "${ECHO_T}none needed" >&6 ;; + *) + echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 + CC="$CC $ac_cv_prog_cc_stdc" ;; +esac + +# Some people use a C++ compiler to compile C. Since we use `exit', +# in C++ we need to declare it. In case someone uses the same compiler +# for both compiling C and C++ we need to have the C++ compiler decide +# the declaration of exit, since it's the most demanding environment. +cat >conftest.$ac_ext <<_ACEOF +#ifndef __cplusplus + choke me +#endif +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + for ac_declaration in \ + '' \ + 'extern "C" void std::exit (int) throw (); using std::exit;' \ + 'extern "C" void std::exit (int); using std::exit;' \ + 'extern "C" void exit (int) throw ();' \ + 'extern "C" void exit (int);' \ + 'void exit (int);' +do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_declaration +#include +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then : else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - CPP=/lib/cpp + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +continue fi -rm -f conftest* +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_declaration +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +done rm -f conftest* +if test -n "$ac_declaration"; then + echo '#ifdef __cplusplus' >>confdefs.h + echo $ac_declaration >>confdefs.h + echo '#endif' >>confdefs.h fi -rm -f conftest* - ac_cv_prog_CPP="$CPP" + +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi - CPP="$ac_cv_prog_CPP" +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +# Put a plausible default for CC_FOR_BUILD in Makefile. +if test "x$cross_compiling" = "xno"; then + CC_FOR_BUILD='$(CC)' else - ac_cv_prog_CPP="$CPP" + CC_FOR_BUILD=gcc fi -echo "$ac_t""$CPP" 1>&6 -echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:1129: checking whether ${MAKE-make} sets \${MAKE}" >&5 -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +ALL_LINGUAS= +echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 +set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` +if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat > conftestmake <<\EOF + cat >conftest.make <<\_ACEOF all: - @echo 'ac_maketemp="${MAKE}"' -EOF + @echo 'ac_maketemp="$(MAKE)"' +_ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. -eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` +eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` if test -n "$ac_maketemp"; then eval ac_cv_prog_make_${ac_make}_set=yes else eval ac_cv_prog_make_${ac_make}_set=no fi -rm -f conftestmake +rm -f conftest.make fi if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then - echo "$ac_t""yes" 1>&6 + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 SET_MAKE= else - echo "$ac_t""no" 1>&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 SET_MAKE="MAKE=${MAKE-make}" fi -# Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1158: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_RANLIB="ranlib" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + fi fi -RANLIB="$ac_cv_prog_RANLIB" +RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then - echo "$ac_t""$RANLIB" 1>&6 + echo "$as_me:$LINENO: result: $RANLIB" >&5 +echo "${ECHO_T}$RANLIB" >&6 else - echo "$ac_t""no" 1>&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done -echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:1186: checking for POSIXized ISC" >&5 -if test -d /etc/conf/kconfig.d && - grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 -then - echo "$ac_t""yes" 1>&6 - ISC=yes # If later tests want to check for ISC. - cat >> confdefs.h <<\EOF -#define _POSIX_SOURCE 1 -EOF + test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +echo "${ECHO_T}$ac_ct_RANLIB" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi - if test "$GCC" = yes; then - CC="$CC -posix" + RANLIB=$ac_ct_RANLIB +else + RANLIB="$ac_cv_prog_RANLIB" +fi + + +echo "$as_me:$LINENO: checking for library containing strerror" >&5 +echo $ECHO_N "checking for library containing strerror... $ECHO_C" >&6 +if test "${ac_cv_search_strerror+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_func_search_save_LIBS=$LIBS +ac_cv_search_strerror=no +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char strerror (); +int +main () +{ +strerror (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_search_strerror="none required" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test "$ac_cv_search_strerror" = no; then + for ac_lib in cposix; do + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char strerror (); +int +main () +{ +strerror (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_search_strerror="-l$ac_lib" +break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + done +fi +LIBS=$ac_func_search_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_search_strerror" >&5 +echo "${ECHO_T}$ac_cv_search_strerror" >&6 +if test "$ac_cv_search_strerror" != no; then + test "$ac_cv_search_strerror" = "none required" || LIBS="$ac_cv_search_strerror $LIBS" + +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if test "${ac_cv_prog_CPP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +echo "$as_me:$LINENO: result: $CPP" >&5 +echo "${ECHO_T}$CPP" >&6 +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag else - CC="$CC -Xp" + ac_cpp_err= fi else - echo "$ac_t""no" 1>&6 - ISC= + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + : +else + { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&5 +echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +echo "$as_me:$LINENO: checking for egrep" >&5 +echo $ECHO_N "checking for egrep... $ECHO_C" >&6 +if test "${ac_cv_prog_egrep+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if echo a | (grep -E '(a|b)') >/dev/null 2>&1 + then ac_cv_prog_egrep='grep -E' + else ac_cv_prog_egrep='egrep' + fi fi +echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 +echo "${ECHO_T}$ac_cv_prog_egrep" >&6 + EGREP=$ac_cv_prog_egrep -echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:1207: checking for ANSI C header files" >&5 -if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 + +echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 +if test "${ac_cv_header_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include #include #include #include -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1220: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - rm -rf conftest* + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_header_stdc=yes else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_header_stdc=no + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_header_stdc=no fi -rm -f conftest* +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. -cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include -EOF + +_ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "memchr" >/dev/null 2>&1; then + $EGREP "memchr" >/dev/null 2>&1; then : else - rm -rf conftest* ac_cv_header_stdc=no fi rm -f conftest* @@ -1250,16 +2947,19 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. -cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include -EOF + +_ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "free" >/dev/null 2>&1; then + $EGREP "free" >/dev/null 2>&1; then : else - rm -rf conftest* ac_cv_header_stdc=no fi rm -f conftest* @@ -1268,269 +2968,530 @@ fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. -if test "$cross_compiling" = yes; then + if test "$cross_compiling" = yes; then : else - cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include -#define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int main () { int i; for (i = 0; i < 256; i++) -if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); -exit (0); } +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif -EOF -if { (eval echo configure:1287: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null -then +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + exit(2); + exit (0); +} +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then : else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - ac_cv_header_stdc=no + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_header_stdc=no fi -rm -fr conftest* +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi - fi fi - -echo "$ac_t""$ac_cv_header_stdc" 1>&6 +echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +echo "${ECHO_T}$ac_cv_header_stdc" >&6 if test $ac_cv_header_stdc = yes; then - cat >> confdefs.h <<\EOF + +cat >>confdefs.h <<\_ACEOF #define STDC_HEADERS 1 -EOF - -fi - -echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:1311: checking for working const" >&5 -if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <j = 5; -} -{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ - const int foo = 10; -} +_ACEOF + +fi + +echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 +echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6 +if test "${ac_cv_c_const+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -; return 0; } -EOF -if { (eval echo configure:1365: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* +int +main () +{ +/* FIXME: Include the comments suggested by Paul. */ +#ifndef __cplusplus + /* Ultrix mips cc rejects this. */ + typedef int charset[2]; + const charset x; + /* SunOS 4.1.1 cc rejects this. */ + char const *const *ccp; + char **p; + /* NEC SVR4.0.2 mips cc rejects this. */ + struct point {int x, y;}; + static struct point const zero = {0,0}; + /* AIX XL C 1.02.0.0 rejects this. + It does not let you subtract one const X* pointer from another in + an arm of an if-expression whose if-part is not a constant + expression */ + const char *g = "string"; + ccp = &g + (g ? g-g : 0); + /* HPUX 7.0 cc rejects these. */ + ++ccp; + p = (char**) ccp; + ccp = (char const *const *) p; + { /* SCO 3.2v4 cc rejects this. */ + char *t; + char const *s = 0 ? (char *) 0 : (char const *) 0; + + *t++ = 0; + } + { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ + int x[] = {25, 17}; + const int *foo = &x[0]; + ++foo; + } + { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ + typedef const int *iptr; + iptr p = 0; + ++p; + } + { /* AIX XL C 1.02.0.0 rejects this saying + "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ + struct s { int j; const int *ap[3]; }; + struct s *b; b->j = 5; + } + { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ + const int foo = 10; + } +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_c_const=yes else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_c_const=no + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_c_const=no fi -rm -f conftest* +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi - -echo "$ac_t""$ac_cv_c_const" 1>&6 +echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 +echo "${ECHO_T}$ac_cv_c_const" >&6 if test $ac_cv_c_const = no; then - cat >> confdefs.h <<\EOF -#define const -EOF + +cat >>confdefs.h <<\_ACEOF +#define const +_ACEOF fi -echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:1386: checking for inline" >&5 -if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking for inline" >&5 +echo $ECHO_N "checking for inline... $ECHO_C" >&6 +if test "${ac_cv_c_inline+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do - cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifndef __cplusplus +typedef int foo_t; +static $ac_kw foo_t static_foo () {return 0; } +$ac_kw foo_t foo () {return 0; } +#endif + +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_c_inline=$ac_kw; break else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi -rm -f conftest* +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext done fi +echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5 +echo "${ECHO_T}$ac_cv_c_inline" >&6 + -echo "$ac_t""$ac_cv_c_inline" 1>&6 -case "$ac_cv_c_inline" in +case $ac_cv_c_inline in inline | yes) ;; - no) cat >> confdefs.h <<\EOF -#define inline -EOF - ;; - *) cat >> confdefs.h <>confdefs.h <<_ACEOF +#ifndef __cplusplus +#define inline $ac_val +#endif +_ACEOF + ;; esac -echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:1426: checking for off_t" >&5 -if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +# On IRIX 5.3, sys/types and inttypes.h are conflicting. + + + + + + + + + +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default + +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_Header=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_Header=no" +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + +echo "$as_me:$LINENO: checking for off_t" >&5 +echo $ECHO_N "checking for off_t... $ECHO_C" >&6 +if test "${ac_cv_type_off_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat > conftest.$ac_ext < -#if STDC_HEADERS -#include -#include -#endif -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then - rm -rf conftest* + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +if ((off_t *) 0) + return 0; +if (sizeof (off_t)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_type_off_t=yes else - rm -rf conftest* - ac_cv_type_off_t=no -fi -rm -f conftest* + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 +ac_cv_type_off_t=no fi -echo "$ac_t""$ac_cv_type_off_t" 1>&6 -if test $ac_cv_type_off_t = no; then - cat >> confdefs.h <<\EOF +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_type_off_t" >&5 +echo "${ECHO_T}$ac_cv_type_off_t" >&6 +if test $ac_cv_type_off_t = yes; then + : +else + +cat >>confdefs.h <<_ACEOF #define off_t long -EOF +_ACEOF fi -echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:1459: checking for size_t" >&5 -if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking for size_t" >&5 +echo $ECHO_N "checking for size_t... $ECHO_C" >&6 +if test "${ac_cv_type_size_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat > conftest.$ac_ext < -#if STDC_HEADERS -#include -#include -#endif -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then - rm -rf conftest* + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +if ((size_t *) 0) + return 0; +if (sizeof (size_t)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_type_size_t=yes else - rm -rf conftest* - ac_cv_type_size_t=no -fi -rm -f conftest* + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 +ac_cv_type_size_t=no fi -echo "$ac_t""$ac_cv_type_size_t" 1>&6 -if test $ac_cv_type_size_t = no; then - cat >> confdefs.h <<\EOF +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5 +echo "${ECHO_T}$ac_cv_type_size_t" >&6 +if test $ac_cv_type_size_t = yes; then + : +else + +cat >>confdefs.h <<_ACEOF #define size_t unsigned -EOF +_ACEOF fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! -echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:1494: checking for working alloca.h" >&5 -if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5 +echo $ECHO_N "checking for working alloca.h... $ECHO_C" >&6 +if test "${ac_cv_working_alloca_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include -int main() { -char *p = alloca(2 * sizeof(int)); -; return 0; } -EOF -if { (eval echo configure:1506: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - ac_cv_header_alloca_h=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_header_alloca_h=no -fi -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_header_alloca_h" 1>&6 -if test $ac_cv_header_alloca_h = yes; then - cat >> confdefs.h <<\EOF +int +main () +{ +char *p = (char *) alloca (2 * sizeof (int)); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_working_alloca_h=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_working_alloca_h=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_working_alloca_h" >&5 +echo "${ECHO_T}$ac_cv_working_alloca_h" >&6 +if test $ac_cv_working_alloca_h = yes; then + +cat >>confdefs.h <<\_ACEOF #define HAVE_ALLOCA_H 1 -EOF +_ACEOF fi -echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:1527: checking for alloca" >&5 -if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking for alloca" >&5 +echo $ECHO_N "checking for alloca... $ECHO_C" >&6 +if test "${ac_cv_func_alloca_works+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #ifdef __GNUC__ # define alloca __builtin_alloca #else @@ -1552,137 +3513,217 @@ char *alloca (); # endif #endif -int main() { -char *p = (char *) alloca(1); -; return 0; } -EOF -if { (eval echo configure:1560: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* +int +main () +{ +char *p = (char *) alloca (1); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_func_alloca_works=yes else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_func_alloca_works=no + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_alloca_works=no fi -rm -f conftest* +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext fi +echo "$as_me:$LINENO: result: $ac_cv_func_alloca_works" >&5 +echo "${ECHO_T}$ac_cv_func_alloca_works" >&6 -echo "$ac_t""$ac_cv_func_alloca_works" 1>&6 if test $ac_cv_func_alloca_works = yes; then - cat >> confdefs.h <<\EOF -#define HAVE_ALLOCA 1 -EOF -fi +cat >>confdefs.h <<\_ACEOF +#define HAVE_ALLOCA 1 +_ACEOF -if test $ac_cv_func_alloca_works = no; then +else # The SVR3 libPW and SVR4 libucb both contain incompatible functions - # that cause trouble. Some versions do not even contain alloca or - # contain a buggy version. If you still want to use their alloca, - # use ar to extract alloca.o from them instead of compiling alloca.c. - ALLOCA=alloca.${ac_objext} - cat >> confdefs.h <<\EOF +# that cause trouble. Some versions do not even contain alloca or +# contain a buggy version. If you still want to use their alloca, +# use ar to extract alloca.o from them instead of compiling alloca.c. + +ALLOCA=alloca.$ac_objext + +cat >>confdefs.h <<\_ACEOF #define C_ALLOCA 1 -EOF +_ACEOF -echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:1592: checking whether alloca needs Cray hooks" >&5 -if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking whether \`alloca.c' needs Cray hooks" >&5 +echo $ECHO_N "checking whether \`alloca.c' needs Cray hooks... $ECHO_C" >&6 +if test "${ac_cv_os_cray+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #if defined(CRAY) && ! defined(CRAY2) webecray #else wenotbecray #endif -EOF +_ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "webecray" >/dev/null 2>&1; then - rm -rf conftest* + $EGREP "webecray" >/dev/null 2>&1; then ac_cv_os_cray=yes else - rm -rf conftest* ac_cv_os_cray=no fi rm -f conftest* fi - -echo "$ac_t""$ac_cv_os_cray" 1>&6 +echo "$as_me:$LINENO: result: $ac_cv_os_cray" >&5 +echo "${ECHO_T}$ac_cv_os_cray" >&6 if test $ac_cv_os_cray = yes; then -for ac_func in _getb67 GETB67 getb67; do - echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1622: checking for $ac_func" >&5 -if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +if eval "test \"\${$as_ac_var+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + /* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func(); below. */ -#include -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char $ac_func(); + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif -int main() { +#undef $ac_func +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else -$ac_func(); +char (*f) () = $ac_func; +#endif +#ifdef __cplusplus +} #endif -; return 0; } -EOF -if { (eval echo configure:1650: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_func_$ac_func=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func_$ac_func=no" -fi -rm -f conftest* -fi - -if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then - echo "$ac_t""yes" 1>&6 - cat >> confdefs.h <&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_var=no" +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 +if test `eval echo '${'$as_ac_var'}'` = yes; then + +cat >>confdefs.h <<_ACEOF #define CRAY_STACKSEG_END $ac_func -EOF +_ACEOF - break -else - echo "$ac_t""no" 1>&6 + break fi -done + done fi -echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:1677: checking stack direction for C alloca" >&5 -if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking stack direction for C alloca" >&5 +echo $ECHO_N "checking stack direction for C alloca... $ECHO_C" >&6 +if test "${ac_cv_c_stack_direction+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else if test "$cross_compiling" = yes; then ac_cv_c_stack_direction=0 else - cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +int find_stack_direction () { static char *addr = 0; @@ -1695,138 +3736,316 @@ find_stack_direction () else return (&dummy > addr) ? 1 : -1; } + +int main () { - exit (find_stack_direction() < 0); + exit (find_stack_direction () < 0); } -EOF -if { (eval echo configure:1704: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null -then +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_c_stack_direction=1 else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - ac_cv_c_stack_direction=-1 + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_c_stack_direction=-1 fi -rm -fr conftest* +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi - fi +echo "$as_me:$LINENO: result: $ac_cv_c_stack_direction" >&5 +echo "${ECHO_T}$ac_cv_c_stack_direction" >&6 -echo "$ac_t""$ac_cv_c_stack_direction" 1>&6 -cat >> confdefs.h <>confdefs.h <<_ACEOF #define STACK_DIRECTION $ac_cv_c_stack_direction -EOF +_ACEOF + fi -for ac_hdr in unistd.h + + +for ac_header in stdlib.h unistd.h do -ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1729: checking for $ac_hdr" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1739: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes fi -rm -f conftest* +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` - cat >> confdefs.h <&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------------ ## +## Report this to the AC_PACKAGE_NAME lists. ## +## ------------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - echo "$ac_t""no" 1>&6 + eval "$as_ac_Header=\$ac_header_preproc" +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 + fi +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + done + for ac_func in getpagesize do -echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1768: checking for $ac_func" >&5 -if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +if eval "test \"\${$as_ac_var+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + /* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func(); below. */ -#include -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char $ac_func(); + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif -int main() { +#undef $ac_func +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else -$ac_func(); +char (*f) () = $ac_func; +#endif +#ifdef __cplusplus +} #endif -; return 0; } -EOF -if { (eval echo configure:1796: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_func_$ac_func=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func_$ac_func=no" -fi -rm -f conftest* -fi +int +main () +{ +return f != $ac_func; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_var=no" +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF -if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` - cat >> confdefs.h <&6 fi done -echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:1821: checking for working mmap" >&5 -if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking for working mmap" >&5 +echo $ECHO_N "checking for working mmap... $ECHO_C" >&6 +if test "${ac_cv_func_mmap_fixed_mapped+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else if test "$cross_compiling" = yes; then ac_cv_func_mmap_fixed_mapped=no else - cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +/* malloc might have been renamed as rpl_malloc. */ +#undef malloc /* Thanks to Mike Haertel and Jim Avera for this test. Here is a matrix of mmap possibilities: @@ -1840,34 +4059,34 @@ else back from the file, nor mmap's back from the file at a different address. (There have been systems where private was not correctly implemented like the infamous i386 svr4.0, and systems where the - VM page cache was not coherent with the filesystem buffer cache + VM page cache was not coherent with the file system buffer cache like early versions of FreeBSD and possibly contemporary NetBSD.) For shared mappings, we should conversely verify that changes get - propogated back to all the places they're supposed to be. + propagated back to all the places they're supposed to be. Grep wants private fixed already mapped. The main things grep needs to know about mmap are: * does it exist and is it safe to write into the mmap'd area * how to use it (BSD variants) */ -#include + #include #include -/* This mess was copied from the GNU getpagesize.h. */ -#ifndef HAVE_GETPAGESIZE -# ifdef HAVE_UNISTD_H -# include -# endif +#if !STDC_HEADERS && !HAVE_STDLIB_H +char *malloc (); +#endif +/* This mess was copied from the GNU getpagesize.h. */ +#if !HAVE_GETPAGESIZE /* Assume that all systems that can run configure have sys/param.h. */ -# ifndef HAVE_SYS_PARAM_H +# if !HAVE_SYS_PARAM_H # define HAVE_SYS_PARAM_H 1 # endif # ifdef _SC_PAGESIZE # define getpagesize() sysconf(_SC_PAGESIZE) # else /* no _SC_PAGESIZE */ -# ifdef HAVE_SYS_PARAM_H +# if HAVE_SYS_PARAM_H # include # ifdef EXEC_PAGESIZE # define getpagesize() EXEC_PAGESIZE @@ -1894,327 +4113,575 @@ else #endif /* no HAVE_GETPAGESIZE */ -#ifdef __cplusplus -extern "C" { void *malloc(unsigned); } -#else -char *malloc(); -#endif - int -main() +main () { - char *data, *data2, *data3; - int i, pagesize; - int fd; - - pagesize = getpagesize(); - - /* - * First, make a file with some known garbage in it. - */ - data = malloc(pagesize); - if (!data) - exit(1); - for (i = 0; i < pagesize; ++i) - *(data + i) = rand(); - umask(0); - fd = creat("conftestmmap", 0600); - if (fd < 0) - exit(1); - if (write(fd, data, pagesize) != pagesize) - exit(1); - close(fd); - - /* - * Next, try to mmap the file at a fixed address which - * already has something else allocated at it. If we can, - * also make sure that we see the same garbage. - */ - fd = open("conftestmmap", O_RDWR); - if (fd < 0) - exit(1); - data2 = malloc(2 * pagesize); - if (!data2) - exit(1); - data2 += (pagesize - ((int) data2 & (pagesize - 1))) & (pagesize - 1); - if (data2 != mmap(data2, pagesize, PROT_READ | PROT_WRITE, - MAP_PRIVATE | MAP_FIXED, fd, 0L)) - exit(1); - for (i = 0; i < pagesize; ++i) - if (*(data + i) != *(data2 + i)) - exit(1); - - /* - * Finally, make sure that changes to the mapped area - * do not percolate back to the file as seen by read(). - * (This is a bug on some variants of i386 svr4.0.) - */ - for (i = 0; i < pagesize; ++i) - *(data2 + i) = *(data2 + i) + 1; - data3 = malloc(pagesize); - if (!data3) - exit(1); - if (read(fd, data3, pagesize) != pagesize) - exit(1); - for (i = 0; i < pagesize; ++i) - if (*(data + i) != *(data3 + i)) - exit(1); - close(fd); - unlink("conftestmmap"); - exit(0); + char *data, *data2, *data3; + int i, pagesize; + int fd; + + pagesize = getpagesize (); + + /* First, make a file with some known garbage in it. */ + data = (char *) malloc (pagesize); + if (!data) + exit (1); + for (i = 0; i < pagesize; ++i) + *(data + i) = rand (); + umask (0); + fd = creat ("conftest.mmap", 0600); + if (fd < 0) + exit (1); + if (write (fd, data, pagesize) != pagesize) + exit (1); + close (fd); + + /* Next, try to mmap the file at a fixed address which already has + something else allocated at it. If we can, also make sure that + we see the same garbage. */ + fd = open ("conftest.mmap", O_RDWR); + if (fd < 0) + exit (1); + data2 = (char *) malloc (2 * pagesize); + if (!data2) + exit (1); + data2 += (pagesize - ((long) data2 & (pagesize - 1))) & (pagesize - 1); + if (data2 != mmap (data2, pagesize, PROT_READ | PROT_WRITE, + MAP_PRIVATE | MAP_FIXED, fd, 0L)) + exit (1); + for (i = 0; i < pagesize; ++i) + if (*(data + i) != *(data2 + i)) + exit (1); + + /* Finally, make sure that changes to the mapped area do not + percolate back to the file as seen by read(). (This is a bug on + some variants of i386 svr4.0.) */ + for (i = 0; i < pagesize; ++i) + *(data2 + i) = *(data2 + i) + 1; + data3 = (char *) malloc (pagesize); + if (!data3) + exit (1); + if (read (fd, data3, pagesize) != pagesize) + exit (1); + for (i = 0; i < pagesize; ++i) + if (*(data + i) != *(data3 + i)) + exit (1); + close (fd); + exit (0); } - -EOF -if { (eval echo configure:1969: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null -then +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_func_mmap_fixed_mapped=yes else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - ac_cv_func_mmap_fixed_mapped=no + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_func_mmap_fixed_mapped=no fi -rm -fr conftest* +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi - fi - -echo "$ac_t""$ac_cv_func_mmap_fixed_mapped" 1>&6 +echo "$as_me:$LINENO: result: $ac_cv_func_mmap_fixed_mapped" >&5 +echo "${ECHO_T}$ac_cv_func_mmap_fixed_mapped" >&6 if test $ac_cv_func_mmap_fixed_mapped = yes; then - cat >> confdefs.h <<\EOF + +cat >>confdefs.h <<\_ACEOF #define HAVE_MMAP 1 -EOF +_ACEOF fi +rm -f conftest.mmap + + + + + - - for ac_hdr in argz.h limits.h locale.h nl_types.h malloc.h string.h \ + + + + + +for ac_header in argz.h limits.h locale.h nl_types.h malloc.h string.h \ unistd.h values.h sys/param.h do -ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1997: checking for $ac_hdr" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2007: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes fi -rm -f conftest* +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` - cat >> confdefs.h <&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------------ ## +## Report this to the AC_PACKAGE_NAME lists. ## +## ------------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - echo "$ac_t""no" 1>&6 + eval "$as_ac_Header=\$ac_header_preproc" fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 + +fi +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + done - for ac_func in getcwd munmap putenv setenv setlocale strchr strcasecmp \ + + + + + + + + + + +for ac_func in getcwd munmap putenv setenv setlocale strchr strcasecmp \ __argz_count __argz_stringify __argz_next do -echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2037: checking for $ac_func" >&5 -if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +if eval "test \"\${$as_ac_var+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + /* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func(); below. */ -#include + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $ac_func + /* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif /* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char $ac_func(); - -int main() { - + builtin and then its argument prototype would still apply. */ +char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else -$ac_func(); +char (*f) () = $ac_func; +#endif +#ifdef __cplusplus +} #endif -; return 0; } -EOF -if { (eval echo configure:2065: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_func_$ac_func=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func_$ac_func=no" -fi -rm -f conftest* -fi +int +main () +{ +return f != $ac_func; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_var=no" +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF -if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` - cat >> confdefs.h <&6 fi done if test "${ac_cv_func_stpcpy+set}" != "set"; then - for ac_func in stpcpy + +for ac_func in stpcpy do -echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2094: checking for $ac_func" >&5 -if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +if eval "test \"\${$as_ac_var+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + /* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func(); below. */ -#include -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char $ac_func(); + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif -int main() { +#undef $ac_func +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else -$ac_func(); +char (*f) () = $ac_func; +#endif +#ifdef __cplusplus +} #endif -; return 0; } -EOF -if { (eval echo configure:2122: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_func_$ac_func=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func_$ac_func=no" -fi -rm -f conftest* -fi +int +main () +{ +return f != $ac_func; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_var=no" +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF -if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` - cat >> confdefs.h <&6 fi done fi if test "${ac_cv_func_stpcpy}" = "yes"; then - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define HAVE_STPCPY 1 -EOF +_ACEOF fi if test $ac_cv_header_locale_h = yes; then - echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:2156: checking for LC_MESSAGES" >&5 -if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5 +echo $ECHO_N "checking for LC_MESSAGES... $ECHO_C" >&6 +if test "${am_cv_val_LC_MESSAGES+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include -int main() { +int +main () +{ return LC_MESSAGES -; return 0; } -EOF -if { (eval echo configure:2168: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then am_cv_val_LC_MESSAGES=yes else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - am_cv_val_LC_MESSAGES=no + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +am_cv_val_LC_MESSAGES=no fi -rm -f conftest* +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext fi - -echo "$ac_t""$am_cv_val_LC_MESSAGES" 1>&6 +echo "$as_me:$LINENO: result: $am_cv_val_LC_MESSAGES" >&5 +echo "${ECHO_T}$am_cv_val_LC_MESSAGES" >&6 if test $am_cv_val_LC_MESSAGES = yes; then - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define HAVE_LC_MESSAGES 1 -EOF +_ACEOF fi fi - echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:2189: checking whether NLS is requested" >&5 + echo "$as_me:$LINENO: checking whether NLS is requested" >&5 +echo $ECHO_N "checking whether NLS is requested... $ECHO_C" >&6 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" USE_NLS=$enableval else USE_NLS=yes -fi +fi; + echo "$as_me:$LINENO: result: $USE_NLS" >&5 +echo "${ECHO_T}$USE_NLS" >&6 - echo "$ac_t""$USE_NLS" 1>&6 - USE_INCLUDED_LIBINTL=no if test "$USE_NLS" = "yes"; then - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define ENABLE_NLS 1 -EOF +_ACEOF + + echo "$as_me:$LINENO: checking whether included gettext is requested" >&5 +echo $ECHO_N "checking whether included gettext is requested... $ECHO_C" >&6 - echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:2209: checking whether included gettext is requested" >&5 - # Check whether --with-included-gettext or --without-included-gettext was given. +# Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" nls_cv_force_use_gnu_gettext=$withval else nls_cv_force_use_gnu_gettext=no -fi - - echo "$ac_t""$nls_cv_force_use_gnu_gettext" 1>&6 +fi; + echo "$as_me:$LINENO: result: $nls_cv_force_use_gnu_gettext" >&5 +echo "${ECHO_T}$nls_cv_force_use_gnu_gettext" >&6 nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" if test "$nls_cv_force_use_gnu_gettext" != "yes"; then @@ -2222,141 +4689,335 @@ fi nls_cv_header_libgt= CATOBJEXT=NONE - ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:2228: checking for libintl.h" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5 +echo $ECHO_N "checking for libintl.h... $ECHO_C" >&6 +if test "${ac_cv_header_libintl_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_libintl_h" >&5 +echo "${ECHO_T}$ac_cv_header_libintl_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking libintl.h usability" >&5 +echo $ECHO_N "checking libintl.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking libintl.h presence" >&5 +echo $ECHO_N "checking libintl.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2238: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes fi -rm -f conftest* +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: libintl.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: libintl.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: libintl.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: libintl.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: libintl.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: libintl.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: libintl.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: libintl.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: libintl.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: libintl.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: libintl.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: libintl.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: libintl.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: libintl.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------------ ## +## Report this to the AC_PACKAGE_NAME lists. ## +## ------------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for libintl.h" >&5 +echo $ECHO_N "checking for libintl.h... $ECHO_C" >&6 +if test "${ac_cv_header_libintl_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_libintl_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_libintl_h" >&5 +echo "${ECHO_T}$ac_cv_header_libintl_h" >&6 + fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:2255: checking for gettext in libc" >&5 -if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +if test $ac_cv_header_libintl_h = yes; then + echo "$as_me:$LINENO: checking for gettext in libc" >&5 +echo $ECHO_N "checking for gettext in libc... $ECHO_C" >&6 +if test "${gt_cv_func_gettext_libc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include -int main() { +int +main () +{ return (int) gettext ("") -; return 0; } -EOF -if { (eval echo configure:2267: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then gt_cv_func_gettext_libc=yes else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - gt_cv_func_gettext_libc=no + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +gt_cv_func_gettext_libc=no fi -rm -f conftest* +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext fi - -echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 +echo "$as_me:$LINENO: result: $gt_cv_func_gettext_libc" >&5 +echo "${ECHO_T}$gt_cv_func_gettext_libc" >&6 if test "$gt_cv_func_gettext_libc" != "yes"; then - echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:2283: checking for bindtextdomain in -lintl" >&5 -ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 + echo "$as_me:$LINENO: checking for bindtextdomain in -lintl" >&5 +echo $ECHO_N "checking for bindtextdomain in -lintl... $ECHO_C" >&6 +if test "${ac_cv_lib_intl_bindtextdomain+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - ac_save_LIBS="$LIBS" + ac_check_lib_save_LIBS=$LIBS LIBS="-lintl $LIBS" -cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + /* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif /* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char bindtextdomain(); - -int main() { -bindtextdomain() -; return 0; } -EOF -if { (eval echo configure:2302: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:2318: checking for gettext in libintl" >&5 -if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_intl_bindtextdomain=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_intl_bindtextdomain=no +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_intl_bindtextdomain" >&5 +echo "${ECHO_T}$ac_cv_lib_intl_bindtextdomain" >&6 +if test $ac_cv_lib_intl_bindtextdomain = yes; then + echo "$as_me:$LINENO: checking for gettext in libintl" >&5 +echo $ECHO_N "checking for gettext in libintl... $ECHO_C" >&6 +if test "${gt_cv_func_gettext_libintl+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -int main() { +int +main () +{ return (int) gettext ("") -; return 0; } -EOF -if { (eval echo configure:2330: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then gt_cv_func_gettext_libintl=yes else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - gt_cv_func_gettext_libintl=no + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +gt_cv_func_gettext_libintl=no fi -rm -f conftest* +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext fi - -echo "$ac_t""$gt_cv_func_gettext_libintl" 1>&6 -else - echo "$ac_t""no" 1>&6 +echo "$as_me:$LINENO: result: $gt_cv_func_gettext_libintl" >&5 +echo "${ECHO_T}$gt_cv_func_gettext_libintl" >&6 fi fi if test "$gt_cv_func_gettext_libc" = "yes" \ || test "$gt_cv_func_gettext_libintl" = "yes"; then - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define HAVE_GETTEXT 1 -EOF +_ACEOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2358: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_path_MSGFMT+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else case "$MSGFMT" in /*) @@ -2380,108 +5041,161 @@ esac fi MSGFMT="$ac_cv_path_MSGFMT" if test -n "$MSGFMT"; then - echo "$ac_t""$MSGFMT" 1>&6 + echo "$as_me:$LINENO: result: $MSGFMT" >&5 +echo "${ECHO_T}$MSGFMT" >&6 else - echo "$ac_t""no" 1>&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi if test "$MSGFMT" != "no"; then - for ac_func in dcgettext + +for ac_func in dcgettext do -echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2392: checking for $ac_func" >&5 -if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +if eval "test \"\${$as_ac_var+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + /* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func(); below. */ -#include -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char $ac_func(); + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif -int main() { +#undef $ac_func +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else -$ac_func(); +char (*f) () = $ac_func; +#endif +#ifdef __cplusplus +} #endif -; return 0; } -EOF -if { (eval echo configure:2420: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_func_$ac_func=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func_$ac_func=no" -fi -rm -f conftest* -fi +int +main () +{ +return f != $ac_func; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_var=no" +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF -if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` - cat >> confdefs.h <&6 fi done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2447: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_path_GMSGFMT+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - case "$GMSGFMT" in - /*) + case $GMSGFMT in + [\\/]* | ?:[\\/]*) ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. ;; - ?:/*) - ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path. - ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_path_GMSGFMT="$ac_dir/$ac_word" - break - fi - done - IFS="$ac_save_ifs" + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" ;; esac fi -GMSGFMT="$ac_cv_path_GMSGFMT" +GMSGFMT=$ac_cv_path_GMSGFMT + if test -n "$GMSGFMT"; then - echo "$ac_t""$GMSGFMT" 1>&6 + echo "$as_me:$LINENO: result: $GMSGFMT" >&5 +echo "${ECHO_T}$GMSGFMT" >&6 else - echo "$ac_t""no" 1>&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2483: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_path_XGETTEXT+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else case "$XGETTEXT" in /*) @@ -2505,42 +5219,71 @@ esac fi XGETTEXT="$ac_cv_path_XGETTEXT" if test -n "$XGETTEXT"; then - echo "$ac_t""$XGETTEXT" 1>&6 + echo "$as_me:$LINENO: result: $XGETTEXT" >&5 +echo "${ECHO_T}$XGETTEXT" >&6 else - echo "$ac_t""no" 1>&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi - cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ -int main() { +int +main () +{ extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr -; return 0; } -EOF -if { (eval echo configure:2523: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then CATOBJEXT=.gmo DATADIRNAME=share else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - CATOBJEXT=.mo + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +CATOBJEXT=.mo DATADIRNAME=lib fi -rm -f conftest* +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext INSTOBJEXT=.mo fi fi - -else - echo "$ac_t""no" 1>&6 + fi - + + if test "$CATOBJEXT" = "NONE"; then nls_cv_use_gnu_gettext=yes fi @@ -2550,10 +5293,10 @@ fi INTLOBJS="\$(GETTOBJS)" # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2555: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_path_MSGFMT+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else case "$MSGFMT" in /*) @@ -2577,53 +5320,59 @@ esac fi MSGFMT="$ac_cv_path_MSGFMT" if test -n "$MSGFMT"; then - echo "$ac_t""$MSGFMT" 1>&6 + echo "$as_me:$LINENO: result: $MSGFMT" >&5 +echo "${ECHO_T}$MSGFMT" >&6 else - echo "$ac_t""no" 1>&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2589: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_path_GMSGFMT+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - case "$GMSGFMT" in - /*) + case $GMSGFMT in + [\\/]* | ?:[\\/]*) ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. ;; - ?:/*) - ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path. - ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_path_GMSGFMT="$ac_dir/$ac_word" - break - fi - done - IFS="$ac_save_ifs" + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" ;; esac fi -GMSGFMT="$ac_cv_path_GMSGFMT" +GMSGFMT=$ac_cv_path_GMSGFMT + if test -n "$GMSGFMT"; then - echo "$ac_t""$GMSGFMT" 1>&6 + echo "$as_me:$LINENO: result: $GMSGFMT" >&5 +echo "${ECHO_T}$GMSGFMT" >&6 else - echo "$ac_t""no" 1>&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2625: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_path_XGETTEXT+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else case "$XGETTEXT" in /*) @@ -2647,12 +5396,14 @@ esac fi XGETTEXT="$ac_cv_path_XGETTEXT" if test -n "$XGETTEXT"; then - echo "$ac_t""$XGETTEXT" 1>&6 + echo "$as_me:$LINENO: result: $XGETTEXT" >&5 +echo "${ECHO_T}$XGETTEXT" >&6 else - echo "$ac_t""no" 1>&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi - + USE_INCLUDED_LIBINTL=yes CATOBJEXT=.gmo INSTOBJEXT=.mo @@ -2668,7 +5419,8 @@ fi if $XGETTEXT --omit-header /dev/null 2> /dev/null; then : ; else - echo "$ac_t""found xgettext programs is not GNU xgettext; ignore it" 1>&6 + echo "$as_me:$LINENO: result: found xgettext programs is not GNU xgettext; ignore it" >&5 +echo "${ECHO_T}found xgettext programs is not GNU xgettext; ignore it" >&6 XGETTEXT=":" fi fi @@ -2693,25 +5445,25 @@ fi POFILES="$POFILES $lang.po" done - - - - - - - - - - - - + + + + + + + + + + + + if test "x$CATOBJEXT" != "x"; then if test "x$ALL_LINGUAS" = "x"; then LINGUAS= else - echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:2715: checking for catalogs to be installed" >&5 + echo "$as_me:$LINENO: checking for catalogs to be installed" >&5 +echo $ECHO_N "checking for catalogs to be installed... $ECHO_C" >&6 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -2719,7 +5471,8 @@ echo "configure:2715: checking for catalogs to be installed" >&5 esac done LINGUAS=$NEW_LINGUAS - echo "$ac_t""$LINGUAS" 1>&6 + echo "$as_me:$LINENO: result: $LINGUAS" >&5 +echo "${ECHO_T}$LINGUAS" >&6 fi if test -n "$LINGUAS"; then @@ -2733,45 +5486,155 @@ echo "configure:2715: checking for catalogs to be installed" >&5 INCLUDE_LOCALE_H="\ /* The system does not provide the header . Take care yourself. */" fi - + if test -f $srcdir/po2tbl.sed.in; then if test "$CATOBJEXT" = ".cat"; then - ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:2743: checking for linux/version.h" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5 +echo $ECHO_N "checking for linux/version.h... $ECHO_C" >&6 +if test "${ac_cv_header_linux_version_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_linux_version_h" >&5 +echo "${ECHO_T}$ac_cv_header_linux_version_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking linux/version.h usability" >&5 +echo $ECHO_N "checking linux/version.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default #include -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2753: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking linux/version.h presence" >&5 +echo $ECHO_N "checking linux/version.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes fi -rm -f conftest* +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: linux/version.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: linux/version.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: linux/version.h: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: linux/version.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: linux/version.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: linux/version.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: linux/version.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: linux/version.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: linux/version.h: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: linux/version.h: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: linux/version.h: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: linux/version.h: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: linux/version.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: linux/version.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: linux/version.h: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: linux/version.h: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------------ ## +## Report this to the AC_PACKAGE_NAME lists. ## +## ------------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for linux/version.h" >&5 +echo $ECHO_N "checking for linux/version.h... $ECHO_C" >&6 +if test "${ac_cv_header_linux_version_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_linux_version_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_linux_version_h" >&5 +echo "${ECHO_T}$ac_cv_header_linux_version_h" >&6 + fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 +if test $ac_cv_header_linux_version_h = yes; then msgformat=linux else - echo "$ac_t""no" 1>&6 -msgformat=xopen + msgformat=xopen fi + sed -e '/^#/d' $srcdir/$msgformat-msg.sed > po2msg.sed fi sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \ @@ -2785,14 +5648,14 @@ fi GT_NO= GT_YES="#YES#" fi - - + + MKINSTALLDIRS="\$(srcdir)/../../mkinstalldirs" - + l= - + if test -d $srcdir/po; then test -d po || mkdir po @@ -2809,7 +5672,7 @@ fi sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ < $srcdir/po/POTFILES.in > po/POTFILES fi - + # Check whether --enable-sim-alignment or --disable-sim-alignment was given. @@ -2819,15 +5682,16 @@ if test "${enable_sim_alignment+set}" = set; then yes | strict | STRICT) sim_alignment="-DWITH_ALIGNMENT=STRICT_ALIGNMENT";; no | nonstrict | NONSTRICT) sim_alignment="-DWITH_ALIGNMENT=NONSTRICT_ALIGNMENT";; 0 | default | DEFAULT) sim_alignment="-DWITH_ALIGNMENT=0";; - *) { echo "configure: error: "Unknown value $enableval passed to --enable-sim-alignment"" 1>&2; exit 1; }; sim_alignment="";; + *) { { echo "$as_me:$LINENO: error: \"Unknown value $enableval passed to --enable-sim-alignment\"" >&5 +echo "$as_me: error: \"Unknown value $enableval passed to --enable-sim-alignment\"" >&2;} + { (exit 1); exit 1; }; }; sim_alignment="";; esac if test x"$silent" != x"yes" && test x"$sim_alignment" != x""; then echo "Setting alignment flags = $sim_alignment" 6>&1 fi else sim_alignment="" -fi - +fi; # Check whether --enable-sim-assert or --disable-sim-assert was given. if test "${enable_sim_assert+set}" = set; then @@ -2835,30 +5699,32 @@ if test "${enable_sim_assert+set}" = set; then case "${enableval}" in yes) sim_assert="-DWITH_ASSERT=1";; no) sim_assert="-DWITH_ASSERT=0";; - *) { echo "configure: error: "--enable-sim-assert does not take a value"" 1>&2; exit 1; }; sim_assert="";; + *) { { echo "$as_me:$LINENO: error: \"--enable-sim-assert does not take a value\"" >&5 +echo "$as_me: error: \"--enable-sim-assert does not take a value\"" >&2;} + { (exit 1); exit 1; }; }; sim_assert="";; esac if test x"$silent" != x"yes" && test x"$sim_assert" != x""; then echo "Setting assert flags = $sim_assert" 6>&1 fi else sim_assert="" -fi - +fi; # Check whether --enable-sim-bitsize or --disable-sim-bitsize was given. if test "${enable_sim_bitsize+set}" = set; then enableval="$enable_sim_bitsize" case "${enableval}" in 32|64) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=$enableval";; - *) { echo "configure: error: "--enable-sim-bitsize was given $enableval. Expected 32 or 64"" 1>&2; exit 1; }; sim_bitsize="";; + *) { { echo "$as_me:$LINENO: error: \"--enable-sim-bitsize was given $enableval. Expected 32 or 64\"" >&5 +echo "$as_me: error: \"--enable-sim-bitsize was given $enableval. Expected 32 or 64\"" >&2;} + { (exit 1); exit 1; }; }; sim_bitsize="";; esac if test x"$silent" != x"yes" && test x"$sim_bitsize" != x""; then echo "Setting bitsize flags = $sim_bitsize" 6>&1 fi else sim_bitsize="" -fi - +fi; # Check whether --enable-sim-bswap or --disable-sim-bswap was given. if test "${enable_sim_bswap+set}" = set; then @@ -2866,15 +5732,16 @@ if test "${enable_sim_bswap+set}" = set; then case "${enableval}" in yes) sim_bswap="-DWITH_BSWAP=1";; no) sim_bswap="-DWITH_BSWAP=0";; - *) { echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";; + *) { { echo "$as_me:$LINENO: error: \"--enable-sim-bswap does not take a value\"" >&5 +echo "$as_me: error: \"--enable-sim-bswap does not take a value\"" >&2;} + { (exit 1); exit 1; }; }; sim_bswap="";; esac if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then echo "Setting bswap flags = $sim_bswap" 6>&1 fi else sim_bswap="" -fi - +fi; # Check whether --enable-sim-cflags or --disable-sim-cflags was given. if test "${enable_sim_cflags+set}" = set; then @@ -2889,20 +5756,23 @@ if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then fi else sim_cflags="" -fi - +fi; # Check whether --enable-sim-config or --disable-sim-config was given. if test "${enable_sim_config+set}" = set; then enableval="$enable_sim_config" case "${enableval}" in - yes|no) { echo "configure: error: "No value supplied for --enable-sim-config=file"" 1>&2; exit 1; };; + yes|no) { { echo "$as_me:$LINENO: error: \"No value supplied for --enable-sim-config=file\"" >&5 +echo "$as_me: error: \"No value supplied for --enable-sim-config=file\"" >&2;} + { (exit 1); exit 1; }; };; *) if test -f "${srcdir}/${enableval}"; then sim_config="${enableval}"; elif test -f "${srcdir}/${enableval}-config.h"; then sim_config="${enableval}-config.h" else - { echo "configure: error: "Config file $enableval was not found"" 1>&2; exit 1; }; + { { echo "$as_me:$LINENO: error: \"Config file $enableval was not found\"" >&5 +echo "$as_me: error: \"Config file $enableval was not found\"" >&2;} + { (exit 1); exit 1; }; }; sim_config=std-config.h fi;; esac @@ -2914,16 +5784,19 @@ else if test x"$silent" != x"yes"; then echo "Setting config flags = $sim_config" 6>&1 fi -fi - +fi; # Check whether --enable-sim-decode-mechanism or --disable-sim-decode-mechanism was given. if test "${enable_sim_decode_mechanism+set}" = set; then enableval="$enable_sim_decode_mechanism" case "${enableval}" in - yes|no) { echo "configure: error: "No value supplied for --enable-sim-decode-mechanism=file"" 1>&2; exit 1; };; + yes|no) { { echo "$as_me:$LINENO: error: \"No value supplied for --enable-sim-decode-mechanism=file\"" >&5 +echo "$as_me: error: \"No value supplied for --enable-sim-decode-mechanism=file\"" >&2;} + { (exit 1); exit 1; }; };; array|switch|padded-switch|goto-switch) sim_decode_mechanism="-T ${enableval}";; - *) { echo "configure: error: "File $enableval is not an opcode rules file"" 1>&2; exit 1; }; + *) { { echo "$as_me:$LINENO: error: \"File $enableval is not an opcode rules file\"" >&5 +echo "$as_me: error: \"File $enableval is not an opcode rules file\"" >&2;} + { (exit 1); exit 1; }; }; sim_decode_mechanism="switch";; esac if test x"$silent" != x"yes" && test x"$sim_decode_mechanism" != x""; then @@ -2934,14 +5807,15 @@ else if test x"$silent" != x"yes"; then echo "Setting decode mechanism flags = $sim_decode_mechanism" fi -fi - +fi; # Check whether --enable-sim-default-model or --disable-sim-default-model was given. if test "${enable_sim_default_model+set}" = set; then enableval="$enable_sim_default_model" case "${enableval}" in - yes|no) { echo "configure: error: "No value supplied for --enable-sim-default-model=model"" 1>&2; exit 1; };; + yes|no) { { echo "$as_me:$LINENO: error: \"No value supplied for --enable-sim-default-model=model\"" >&5 +echo "$as_me: error: \"No value supplied for --enable-sim-default-model=model\"" >&2;} + { (exit 1); exit 1; }; };; *) sim_default_model="-DWITH_DEFAULT_MODEL=${enableval}";; esac if test x"$silent" != x"yes" && test x"$sim_default_model" != x""; then @@ -2949,8 +5823,7 @@ if test x"$silent" != x"yes" && test x"$sim_default_model" != x""; then fi else sim_default_model="" -fi - +fi; # Check whether --enable-sim-duplicate or --disable-sim-duplicate was given. if test "${enable_sim_duplicate+set}" = set; then @@ -2958,7 +5831,9 @@ if test "${enable_sim_duplicate+set}" = set; then case "${enableval}" in yes) sim_dup="-E";; no) sim_dup="";; - *) { echo "configure: error: "--enable-sim-duplicate does not take a value"" 1>&2; exit 1; }; sim_dup="";; + *) { { echo "$as_me:$LINENO: error: \"--enable-sim-duplicate does not take a value\"" >&5 +echo "$as_me: error: \"--enable-sim-duplicate does not take a value\"" >&2;} + { (exit 1); exit 1; }; }; sim_dup="";; esac if test x"$silent" != x"yes" && test x"$sim_dup" != x""; then echo "Setting duplicate flags = $sim_dup" 6>&1 @@ -2968,8 +5843,7 @@ else if test x"$silent" != x"yes"; then echo "Setting duplicate flags = $sim_dup" 6>&1 fi -fi - +fi; # Check whether --enable-sim-endian or --disable-sim-endian was given. if test "${enable_sim_endian+set}" = set; then @@ -2983,15 +5857,16 @@ if test "${enable_sim_endian+set}" = set; then no) sim_endian="-DWITH_TARGET_BYTE_ORDER=0";; b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; - *) { echo "configure: error: "Unknown value $enableval for --enable-sim-endian"" 1>&2; exit 1; }; sim_endian="";; + *) { { echo "$as_me:$LINENO: error: \"Unknown value $enableval for --enable-sim-endian\"" >&5 +echo "$as_me: error: \"Unknown value $enableval for --enable-sim-endian\"" >&2;} + { (exit 1); exit 1; }; }; sim_endian="";; esac if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then echo "Setting endian flags = $sim_endian" 6>&1 fi else sim_endian="" -fi - +fi; # Check whether --enable-sim-env or --disable-sim-env was given. if test "${enable_sim_env+set}" = set; then @@ -3001,21 +5876,24 @@ if test "${enable_sim_env+set}" = set; then virtual | vea) sim_env="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";; user | uea) sim_env="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";; no) sim_env="-DWITH_ENVIRONMENT=0";; - *) { echo "configure: error: "Unknown value $enableval passed to --enable-sim-env"" 1>&2; exit 1; }; sim_env="";; + *) { { echo "$as_me:$LINENO: error: \"Unknown value $enableval passed to --enable-sim-env\"" >&5 +echo "$as_me: error: \"Unknown value $enableval passed to --enable-sim-env\"" >&2;} + { (exit 1); exit 1; }; }; sim_env="";; esac if test x"$silent" != x"yes" && test x"$sim_env" != x""; then echo "Setting env flags = $sim_env" 6>&1 fi else sim_env="" -fi - +fi; # Check whether --enable-sim-filter or --disable-sim-filter was given. if test "${enable_sim_filter+set}" = set; then enableval="$enable_sim_filter" case "${enableval}" in - yes) { echo "configure: error: "--enable-sim-filter must be specified with a rule to filter or no"" 1>&2; exit 1; }; sim_filter="";; + yes) { { echo "$as_me:$LINENO: error: \"--enable-sim-filter must be specified with a rule to filter or no\"" >&5 +echo "$as_me: error: \"--enable-sim-filter must be specified with a rule to filter or no\"" >&2;} + { (exit 1); exit 1; }; }; sim_filter="";; no) sim_filter="";; *) sim_filter="-F $enableval";; esac @@ -3027,8 +5905,7 @@ else if test x"$silent" != x"yes"; then echo "Setting filter flags = $sim_filter" 6>&1 fi -fi - +fi; # Check whether --enable-sim-float or --disable-sim-float was given. if test "${enable_sim_float+set}" = set; then @@ -3038,21 +5915,22 @@ if test "${enable_sim_float+set}" = set; then no | soft) sim_float="-DWITH_FLOATING_POINT=SOFT_FLOATING_POINT";; altivec) sim_float="-DWITH_ALTIVEC" ; sim_filter="${sim_filter},av" ;; *spe*|*simd*) sim_float="-DWITH_E500" ; sim_filter="${sim_filter},e500" ;; - *) { echo "configure: error: "Unknown value $enableval passed to --enable-sim-float"" 1>&2; exit 1; }; sim_float="";; + *) { { echo "$as_me:$LINENO: error: \"Unknown value $enableval passed to --enable-sim-float\"" >&5 +echo "$as_me: error: \"Unknown value $enableval passed to --enable-sim-float\"" >&2;} + { (exit 1); exit 1; }; }; sim_float="";; esac if test x"$silent" != x"yes" && test x"$sim_float" != x""; then echo "Setting float flags = $sim_float" 6>&1 fi else - + case "${target}" in *altivec*) sim_float="-DWITH_ALTIVEC" ; sim_filter="${sim_filter},av" ;; *spe*|*simd*) sim_float="-DWITH_E500" ; sim_filter="${sim_filter},e500" ;; *) sim_float="" esac -fi - +fi; # Check whether --enable-sim-hardware or --disable-sim-hardware was given. if test "${enable_sim_hardware+set}" = set; then @@ -3060,7 +5938,9 @@ if test "${enable_sim_hardware+set}" = set; then hardware="cpu,memory,nvram,iobus,htab,disk,trace,register,vm,init,core,pal,com,eeprom,opic,glue,phb,ide" case "${enableval}" in yes) ;; - no) { echo "configure: error: "List of hardware must be specified for --enable-sim-hardware"" 1>&2; exit 1; }; hardware="";; + no) { { echo "$as_me:$LINENO: error: \"List of hardware must be specified for --enable-sim-hardware\"" >&5 +echo "$as_me: error: \"List of hardware must be specified for --enable-sim-hardware\"" >&2;} + { (exit 1); exit 1; }; }; hardware="";; ,*) hardware="${hardware}${enableval}";; *,) hardware="${enableval}${hardware}";; *) hardware="${enableval}"'';; @@ -3077,23 +5957,23 @@ sim_hw_obj=`echo $sim_hw_src | sed -e 's/\.c/.o/g'` if test x"$silent" != x"yes"; then echo "Setting hardware to $sim_hw_src, $sim_hw_obj" fi -fi - +fi; # Check whether --enable-sim-hostbitsize or --disable-sim-hostbitsize was given. if test "${enable_sim_hostbitsize+set}" = set; then enableval="$enable_sim_hostbitsize" case "${enableval}" in 32|64) sim_hostbitsize="-DWITH_HOST_WORD_BITSIZE=$enableval";; - *) { echo "configure: error: "--enable-sim-hostbitsize was given $enableval. Expected 32 or 64"" 1>&2; exit 1; }; sim_hostbitsize="";; + *) { { echo "$as_me:$LINENO: error: \"--enable-sim-hostbitsize was given $enableval. Expected 32 or 64\"" >&5 +echo "$as_me: error: \"--enable-sim-hostbitsize was given $enableval. Expected 32 or 64\"" >&2;} + { (exit 1); exit 1; }; }; sim_hostbitsize="";; esac if test x"$silent" != x"yes" && test x"$sim_hostbitsize" != x""; then echo "Setting hostbitsize flags = $sim_hostbitsize" 6>&1 fi else sim_hostbitsize="" -fi - +fi; # Check whether --enable-sim-hostendian or --disable-sim-hostendian was given. if test "${enable_sim_hostendian+set}" = set; then @@ -3102,71 +5982,192 @@ if test "${enable_sim_hostendian+set}" = set; then no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";; b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";; l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";; - *) { echo "configure: error: "Unknown value $enableval for --enable-sim-hostendian"" 1>&2; exit 1; }; sim_hostendian="";; + *) { { echo "$as_me:$LINENO: error: \"Unknown value $enableval for --enable-sim-hostendian\"" >&5 +echo "$as_me: error: \"Unknown value $enableval for --enable-sim-hostendian\"" >&2;} + { (exit 1); exit 1; }; }; sim_hostendian="";; esac if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then echo "Setting hostendian flags = $sim_hostendian" 6>&1 fi else - + if test "x$cross_compiling" = "xno"; then - echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6 -echo "configure:3115: checking whether byte ordering is bigendian" >&5 -if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_cv_c_bigendian=unknown -# See if sys/param.h defines the BYTE_ORDER macro. -cat > conftest.$ac_ext <&5 +echo $ECHO_N "checking whether byte ordering is bigendian... $ECHO_C" >&6 +if test "${ac_cv_c_bigendian+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # See if sys/param.h defines the BYTE_ORDER macro. +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include #include -int main() { +int +main () +{ #if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN bogus endian macros #endif -; return 0; } -EOF -if { (eval echo configure:3133: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then # It does; now see whether it defined to BIG_ENDIAN or not. -cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include #include -int main() { +int +main () +{ #if BYTE_ORDER != BIG_ENDIAN not big endian #endif -; return 0; } -EOF -if { (eval echo configure:3148: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_c_bigendian=yes else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_c_bigendian=no + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_c_bigendian=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +# It does not; compile a test program. +if test "$cross_compiling" = yes; then + # try to guess the endianness by grepping values into an object file + ac_cv_c_bigendian=unknown + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; +short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; +void _ascii () { char *s = (char *) ascii_mm; s = (char *) ascii_ii; } +short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; +short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; +void _ebcdic () { char *s = (char *) ebcdic_mm; s = (char *) ebcdic_ii; } +int +main () +{ + _ascii (); _ebcdic (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + if grep BIGenDianSyS conftest.$ac_objext >/dev/null ; then + ac_cv_c_bigendian=yes +fi +if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then + if test "$ac_cv_c_bigendian" = unknown; then + ac_cv_c_bigendian=no + else + # finding both strings is unlikely to happen, but who knows? + ac_cv_c_bigendian=unknown + fi fi -rm -f conftest* else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi -rm -f conftest* -if test $ac_cv_c_bigendian = unknown; then -if test "$cross_compiling" = yes; then - { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext else - cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +int +main () +{ /* Are we little or big endian? From Harbison&Steele. */ union { @@ -3176,29 +6177,50 @@ main () { u.l = 1; exit (u.c[sizeof (long) - 1] == 1); } -EOF -if { (eval echo configure:3181: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null -then +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_c_bigendian=no else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - ac_cv_c_bigendian=yes + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_c_bigendian=yes fi -rm -fr conftest* +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi - fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi +echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5 +echo "${ECHO_T}$ac_cv_c_bigendian" >&6 +case $ac_cv_c_bigendian in + yes) -echo "$ac_t""$ac_cv_c_bigendian" 1>&6 -if test $ac_cv_c_bigendian = yes; then - cat >> confdefs.h <<\EOF +cat >>confdefs.h <<\_ACEOF #define WORDS_BIGENDIAN 1 -EOF - -fi +_ACEOF + ;; + no) + ;; + *) + { { echo "$as_me:$LINENO: error: unknown endianness +presetting ac_cv_c_bigendian=no (or yes) will help" >&5 +echo "$as_me: error: unknown endianness +presetting ac_cv_c_bigendian=no (or yes) will help" >&2;} + { (exit 1); exit 1; }; } ;; +esac if test $ac_cv_c_bigendian = yes; then sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN" @@ -3208,8 +6230,7 @@ fi else sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" fi -fi - +fi; # Check whether --enable-sim-icache or --disable-sim-icache was given. if test "${enable_sim_icache+set}" = set; then @@ -3226,7 +6247,9 @@ if test "${enable_sim_icache+set}" = set; then semantic) sim_icache="${sim_icache}C";; insn) sim_icache="${sim_icache}S";; 0*|1*|2*|3*|4*|5*|6*|7*|8*|9*) icache=$x;; - *) { echo "configure: error: "Unknown value $x for --enable-sim-icache"" 1>&2; exit 1; }; sim_icache="";; + *) { { echo "$as_me:$LINENO: error: \"Unknown value $x for --enable-sim-icache\"" >&5 +echo "$as_me: error: \"Unknown value $x for --enable-sim-icache\"" >&2;} + { (exit 1); exit 1; }; }; sim_icache="";; esac done sim_icache="${sim_icache}I $icache";; @@ -3239,8 +6262,7 @@ else if test x"$silent" != x"yes"; then echo "Setting instruction cache size to 1024 ($sim_icache)" fi -fi - +fi; # Check whether --enable-sim-inline or --disable-sim-inline was given. if test "${enable_sim_inline+set}" = set; then @@ -3278,8 +6300,7 @@ else else sim_inline="" fi -fi - +fi; # Check whether --enable-sim-jump or --disable-sim-jump was given. if test "${enable_sim_jump+set}" = set; then @@ -3287,7 +6308,9 @@ if test "${enable_sim_jump+set}" = set; then case "${enableval}" in yes) sim_jump="-J";; no) sim_jump="";; - *) { echo "configure: error: "--enable-sim-jump does not take a value"" 1>&2; exit 1; }; sim_jump="";; + *) { { echo "$as_me:$LINENO: error: \"--enable-sim-jump does not take a value\"" >&5 +echo "$as_me: error: \"--enable-sim-jump does not take a value\"" >&2;} + { (exit 1); exit 1; }; }; sim_jump="";; esac if test x"$silent" != x"yes" && test x"$sim_jump" != x""; then echo "Setting jump flag = $sim_jump" 6>&1 @@ -3297,8 +6320,7 @@ else if test x"$silent" != x"yes"; then echo "Setting jump flag = $sim_jump" 6>&1 fi -fi - +fi; # Check whether --enable-sim-line-nr or --disable-sim-line-nr was given. if test "${enable_sim_line_nr+set}" = set; then @@ -3306,21 +6328,24 @@ if test "${enable_sim_line_nr+set}" = set; then case "${enableval}" in yes) sim_line_nr="";; no) sim_line_nr="-L";; - *) { echo "configure: error: "--enable-sim-line-nr does not take a value"" 1>&2; exit 1; }; sim_line_nr="";; + *) { { echo "$as_me:$LINENO: error: \"--enable-sim-line-nr does not take a value\"" >&5 +echo "$as_me: error: \"--enable-sim-line-nr does not take a value\"" >&2;} + { (exit 1); exit 1; }; }; sim_line_nr="";; esac if test x"$silent" != x"yes" && test x"$sim_line_nr" != x""; then echo "Setting warning flags = $sim_line_nr" 6>&1 fi else sim_line_nr="" -fi - +fi; # Check whether --enable-sim-model or --disable-sim-model was given. if test "${enable_sim_model+set}" = set; then enableval="$enable_sim_model" case "${enableval}" in - yes|no) { echo "configure: error: "No value supplied for --enable-sim-model=model"" 1>&2; exit 1; };; + yes|no) { { echo "$as_me:$LINENO: error: \"No value supplied for --enable-sim-model=model\"" >&5 +echo "$as_me: error: \"No value supplied for --enable-sim-model=model\"" >&2;} + { (exit 1); exit 1; }; };; *) sim_model="-DWITH_MODEL=${enableval}";; esac if test x"$silent" != x"yes" && test x"$sim_model" != x""; then @@ -3328,8 +6353,7 @@ if test x"$silent" != x"yes" && test x"$sim_model" != x""; then fi else sim_model="" -fi - +fi; # Check whether --enable-sim-model-issue or --disable-sim-model-issue was given. if test "${enable_sim_model_issue+set}" = set; then @@ -3337,15 +6361,16 @@ if test "${enable_sim_model_issue+set}" = set; then case "${enableval}" in yes) sim_model_issue="-DWITH_MODEL_ISSUE=MODEL_ISSUE_PROCESS";; no) sim_model_issue="-DWITH_MODEL_ISSUE=MODEL_ISSUE_IGNORE";; - *) { echo "configure: error: "--enable-sim-model-issue does not take a value"" 1>&2; exit 1; }; sim_model_issue="";; + *) { { echo "$as_me:$LINENO: error: \"--enable-sim-model-issue does not take a value\"" >&5 +echo "$as_me: error: \"--enable-sim-model-issue does not take a value\"" >&2;} + { (exit 1); exit 1; }; }; sim_model_issue="";; esac if test x"$silent" != x"yes"; then echo "Setting model-issue flags = $sim_model_issue" 6>&1 fi else sim_model_issue="" -fi - +fi; # Check whether --enable-sim-monitor or --disable-sim-monitor was given. if test "${enable_sim_monitor+set}" = set; then @@ -3355,27 +6380,32 @@ if test "${enable_sim_monitor+set}" = set; then no) sim_monitor="-DWITH_MON=0";; instruction) sim_monitor="-DWITH_MON=MONITOR_INSTRUCTION_ISSUE";; memory) sim_monitor="-DWITH_MON=MONITOR_LOAD_STORE_UNIT";; - *) { echo "configure: error: "Unknown value $enableval passed to --enable-sim-mon"" 1>&2; exit 1; }; sim_env="";; + *) { { echo "$as_me:$LINENO: error: \"Unknown value $enableval passed to --enable-sim-mon\"" >&5 +echo "$as_me: error: \"Unknown value $enableval passed to --enable-sim-mon\"" >&2;} + { (exit 1); exit 1; }; }; sim_env="";; esac if test x"$silent" != x"yes" && test x"$sim_monitor" != x""; then echo "Setting monitor flags = $sim_monitor" 6>&1 fi else sim_monitor="" -fi - +fi; # Check whether --enable-sim-opcode or --disable-sim-opcode was given. if test "${enable_sim_opcode+set}" = set; then enableval="$enable_sim_opcode" case "${enableval}" in - yes|no) { echo "configure: error: "No value supplied for --enable-sim-opcode=file"" 1>&2; exit 1; };; + yes|no) { { echo "$as_me:$LINENO: error: \"No value supplied for --enable-sim-opcode=file\"" >&5 +echo "$as_me: error: \"No value supplied for --enable-sim-opcode=file\"" >&2;} + { (exit 1); exit 1; }; };; *) if test -f "${srcdir}/${enableval}"; then sim_opcode="${enableval}" elif test -f "${srcdir}/dc-${enableval}"; then sim_opcode="dc-${enableval}" else - { echo "configure: error: "File $enableval is not an opcode rules file"" 1>&2; exit 1; }; + { { echo "$as_me:$LINENO: error: \"File $enableval is not an opcode rules file\"" >&5 +echo "$as_me: error: \"File $enableval is not an opcode rules file\"" >&2;} + { (exit 1); exit 1; }; }; sim_opcode="dc-complex" fi;; esac @@ -3387,8 +6417,7 @@ else if test x"$silent" != x"yes"; then echo "Setting opcode flags = $sim_opcode" fi -fi - +fi; # Check whether --enable-sim-packages or --disable-sim-packages was given. if test "${enable_sim_packages+set}" = set; then @@ -3396,7 +6425,9 @@ if test "${enable_sim_packages+set}" = set; then packages=disklabel case "${enableval}" in yes) ;; - no) { echo "configure: error: "List of packages must be specified for --enable-sim-packages"" 1>&2; exit 1; }; packages="";; + no) { { echo "$as_me:$LINENO: error: \"List of packages must be specified for --enable-sim-packages\"" >&5 +echo "$as_me: error: \"List of packages must be specified for --enable-sim-packages\"" >&2;} + { (exit 1); exit 1; }; }; packages="";; ,*) packages="${packages}${enableval}";; *,) packages="${enableval}${packages}";; *) packages="${enableval}"'';; @@ -3413,8 +6444,7 @@ sim_pk_obj=`echo $sim_pk_src | sed -e 's/\.c/.o/g'` if test x"$silent" != x"yes"; then echo "Setting packages to $sim_pk_src, $sim_pk_obj" fi -fi - +fi; # Check whether --enable-sim-regparm or --disable-sim-regparm was given. if test "${enable_sim_regparm+set}" = set; then @@ -3423,15 +6453,16 @@ if test "${enable_sim_regparm+set}" = set; then 0*|1*|2*|3*|4*|5*|6*|7*|8*|9*) sim_regparm="-DWITH_REGPARM=${enableval}";; no) sim_regparm="" ;; yes) sim_regparm="-DWITH_REGPARM=3";; - *) { echo "configure: error: "Unknown value $enableval for --enable-sim-regparm"" 1>&2; exit 1; }; sim_regparm="";; + *) { { echo "$as_me:$LINENO: error: \"Unknown value $enableval for --enable-sim-regparm\"" >&5 +echo "$as_me: error: \"Unknown value $enableval for --enable-sim-regparm\"" >&2;} + { (exit 1); exit 1; }; }; sim_regparm="";; esac if test x"$silent" != x"yes" && test x"$sim_regparm" != x""; then echo "Setting regparm flags = $sim_regparm" 6>&1 fi else sim_regparm="" -fi - +fi; # Check whether --enable-sim-reserved-bits or --disable-sim-reserved-bits was given. if test "${enable_sim_reserved_bits+set}" = set; then @@ -3439,15 +6470,16 @@ if test "${enable_sim_reserved_bits+set}" = set; then case "${enableval}" in yes) sim_reserved="-DWITH_RESERVED_BITS=1";; no) sim_reserved="-DWITH_RESERVED_BITS=0";; - *) { echo "configure: error: "--enable-sim-reserved-bits does not take a value"" 1>&2; exit 1; }; sim_reserved="";; + *) { { echo "$as_me:$LINENO: error: \"--enable-sim-reserved-bits does not take a value\"" >&5 +echo "$as_me: error: \"--enable-sim-reserved-bits does not take a value\"" >&2;} + { (exit 1); exit 1; }; }; sim_reserved="";; esac if test x"$silent" != x"yes" && test x"$sim_reserved" != x""; then echo "Setting reserved flags = $sim_reserved" 6>&1 fi else sim_reserved="" -fi - +fi; # Check whether --enable-sim-smp or --disable-sim-smp was given. if test "${enable_sim_smp+set}" = set; then @@ -3465,8 +6497,7 @@ else if test x"$silent" != x"yes"; then echo "Setting smp flags = $sim_smp" 6>&1 fi -fi - +fi; # Check whether --enable-sim-stdcall or --disable-sim-stdcall was given. if test "${enable_sim_stdcall+set}" = set; then @@ -3475,15 +6506,16 @@ if test "${enable_sim_stdcall+set}" = set; then no) sim_stdcall="" ;; std*) sim_stdcall="-DWITH_STDCALL=1";; yes) sim_stdcall="-DWITH_STDCALL=1";; - *) { echo "configure: error: "Unknown value $enableval for --enable-sim-stdcall"" 1>&2; exit 1; }; sim_stdcall="";; + *) { { echo "$as_me:$LINENO: error: \"Unknown value $enableval for --enable-sim-stdcall\"" >&5 +echo "$as_me: error: \"Unknown value $enableval for --enable-sim-stdcall\"" >&2;} + { (exit 1); exit 1; }; }; sim_stdcall="";; esac if test x"$silent" != x"yes" && test x"$sim_stdcall" != x""; then echo "Setting function call flags = $sim_stdcall" 6>&1 fi else sim_stdcall="" -fi - +fi; # Check whether --enable-sim-stdio or --disable-sim-stdio was given. if test "${enable_sim_stdio+set}" = set; then @@ -3491,15 +6523,16 @@ if test "${enable_sim_stdio+set}" = set; then case "${enableval}" in yes) sim_stdio="-DWITH_STDIO=DO_USE_STDIO";; no) sim_stdio="-DWITH_STDIO=DONT_USE_STDIO";; - *) { echo "configure: error: "Unknown value $enableval passed to --enable-sim-stdio"" 1>&2; exit 1; }; sim_stdio="";; + *) { { echo "$as_me:$LINENO: error: \"Unknown value $enableval passed to --enable-sim-stdio\"" >&5 +echo "$as_me: error: \"Unknown value $enableval passed to --enable-sim-stdio\"" >&2;} + { (exit 1); exit 1; }; }; sim_stdio="";; esac if test x"$silent" != x"yes" && test x"$sim_stdio" != x""; then echo "Setting stdio flags = $sim_stdio" 6>&1 fi else sim_stdio="" -fi - +fi; # Check whether --enable-sim-switch or --disable-sim-switch was given. if test "${enable_sim_switch+set}" = set; then @@ -3507,7 +6540,9 @@ if test "${enable_sim_switch+set}" = set; then case "${enableval}" in yes) sim_switch="-s";; no) sim_switch="";; - *) { echo "configure: error: "--enable-sim-switch does not take a value"" 1>&2; exit 1; }; sim_switch="";; + *) { { echo "$as_me:$LINENO: error: \"--enable-sim-switch does not take a value\"" >&5 +echo "$as_me: error: \"--enable-sim-switch does not take a value\"" >&2;} + { (exit 1); exit 1; }; }; sim_switch="";; esac if test x"$silent" != x"yes" && test x"$sim_switch" != x""; then echo "Setting switch flags = $sim_switch" 6>&1 @@ -3517,8 +6552,7 @@ else if test x"$silent" != x"yes"; then echo "Setting switch flags = $sim_switch" 6>&1 fi -fi - +fi; # Check whether --enable-sim-timebase or --disable-sim-timebase was given. if test "${enable_sim_timebase+set}" = set; then @@ -3526,15 +6560,16 @@ if test "${enable_sim_timebase+set}" = set; then case "${enableval}" in yes) sim_timebase="-DWITH_TIME_BASE=1";; no) sim_timebase="-DWITH_TIME_BASE=0";; - *) { echo "configure: error: "--enable-sim-timebase does not take a value"" 1>&2; exit 1; }; sim_timebase="";; + *) { { echo "$as_me:$LINENO: error: \"--enable-sim-timebase does not take a value\"" >&5 +echo "$as_me: error: \"--enable-sim-timebase does not take a value\"" >&2;} + { (exit 1); exit 1; }; }; sim_timebase="";; esac if test x"$silent" != x"yes" && test x"$sim_timebase" != x""; then echo "Setting timebase flags = $sim_timebase" 6>&1 fi else sim_timebase="" -fi - +fi; # Check whether --enable-sim-trace or --disable-sim-trace was given. if test "${enable_sim_trace+set}" = set; then @@ -3542,15 +6577,16 @@ if test "${enable_sim_trace+set}" = set; then case "${enableval}" in yes) sim_trace="-DWITH_TRACE=1";; no) sim_trace="-DWITH_TRACE=0";; - *) { echo "configure: error: "--enable-sim-trace does not take a value"" 1>&2; exit 1; }; sim_trace="";; + *) { { echo "$as_me:$LINENO: error: \"--enable-sim-trace does not take a value\"" >&5 +echo "$as_me: error: \"--enable-sim-trace does not take a value\"" >&2;} + { (exit 1); exit 1; }; }; sim_trace="";; esac if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then echo "Setting trace flags = $sim_trace" 6>&1 fi else sim_trace="" -fi - +fi; # Check whether --enable-sim-warnings or --disable-sim-warnings was given. if test "${enable_sim_warnings+set}" = set; then @@ -3565,8 +6601,7 @@ if test x"$silent" != x"yes" && test x"$sim_warnings" != x""; then fi else sim_warnings="" -fi - +fi; # Check whether --enable-sim-xor-endian or --disable-sim-xor-endian was given. if test "${enable_sim_xor_endian+set}" = set; then @@ -3581,8 +6616,7 @@ if test x"$silent" != x"yes" && test x"$sim_xor_endian" != x""; then fi else sim_xor_endian="" -fi - +fi; ac_aux_dir= for ac_dir in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../..; do @@ -3594,389 +6628,792 @@ for ac_dir in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../..; do ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break + elif test -f $ac_dir/shtool; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break fi done if test -z "$ac_aux_dir"; then - { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../.." 1>&2; exit 1; } + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&5 +echo "$as_me: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&2;} + { (exit 1); exit 1; }; } fi -ac_config_guess=$ac_aux_dir/config.guess -ac_config_sub=$ac_aux_dir/config.sub -ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" +ac_config_sub="$SHELL $ac_aux_dir/config.sub" +ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. +# Make sure we can run config.sub. +$ac_config_sub sun4 >/dev/null 2>&1 || + { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 +echo "$as_me: error: cannot run $ac_config_sub" >&2;} + { (exit 1); exit 1; }; } + +echo "$as_me:$LINENO: checking build system type" >&5 +echo $ECHO_N "checking build system type... $ECHO_C" >&6 +if test "${ac_cv_build+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_build_alias=$build_alias +test -z "$ac_cv_build_alias" && + ac_cv_build_alias=`$ac_config_guess` +test -z "$ac_cv_build_alias" && + { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 +echo "$as_me: error: cannot guess build type; you must specify one" >&2;} + { (exit 1); exit 1; }; } +ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 +echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} + { (exit 1); exit 1; }; } + +fi +echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +echo "${ECHO_T}$ac_cv_build" >&6 +build=$ac_cv_build +build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + + +echo "$as_me:$LINENO: checking host system type" >&5 +echo $ECHO_N "checking host system type... $ECHO_C" >&6 +if test "${ac_cv_host+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_host_alias=$host_alias +test -z "$ac_cv_host_alias" && + ac_cv_host_alias=$ac_cv_build_alias +ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 +echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} + { (exit 1); exit 1; }; } + +fi +echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +echo "${ECHO_T}$ac_cv_host" >&6 +host=$ac_cv_host +host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + + +echo "$as_me:$LINENO: checking target system type" >&5 +echo $ECHO_N "checking target system type... $ECHO_C" >&6 +if test "${ac_cv_target+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_target_alias=$target_alias +test "x$ac_cv_target_alias" = "x" && + ac_cv_target_alias=$ac_cv_host_alias +ac_cv_target=`$ac_config_sub $ac_cv_target_alias` || + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5 +echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;} + { (exit 1); exit 1; }; } + +fi +echo "$as_me:$LINENO: result: $ac_cv_target" >&5 +echo "${ECHO_T}$ac_cv_target" >&6 +target=$ac_cv_target +target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -# Do some error checking and defaulting for the host and target type. -# The inputs are: -# configure --host=HOST --target=TARGET --build=BUILD NONOPT -# -# The rules are: -# 1. You are not allowed to specify --host, --target, and nonopt at the -# same time. -# 2. Host defaults to nonopt. -# 3. If nonopt is not specified, then host defaults to the current host, -# as determined by config.guess. -# 4. Target and build default to nonopt. -# 5. If nonopt is not specified, then target and build default to host. # The aliases save the names the user supplied, while $host etc. # will get canonicalized. -case $host---$target---$nonopt in -NONE---*---* | *---NONE---* | *---*---NONE) ;; -*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;; -esac - - -# Make sure we can run config.sub. -if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : -else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } -fi - -echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:3635: checking host system type" >&5 - -host_alias=$host -case "$host_alias" in -NONE) - case $nonopt in - NONE) - if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : - else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } - fi ;; - *) host_alias=$nonopt ;; - esac ;; -esac - -host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` -host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -echo "$ac_t""$host" 1>&6 - -echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:3656: checking target system type" >&5 - -target_alias=$target -case "$target_alias" in -NONE) - case $nonopt in - NONE) target_alias=$host_alias ;; - *) target_alias=$nonopt ;; - esac ;; -esac - -target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias` -target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -echo "$ac_t""$target" 1>&6 - -echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:3674: checking build system type" >&5 - -build_alias=$build -case "$build_alias" in -NONE) - case $nonopt in - NONE) build_alias=$host_alias ;; - *) build_alias=$nonopt ;; - esac ;; -esac - -build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias` -build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -echo "$ac_t""$build" 1>&6 - -test "$host_alias" != "$target_alias" && +test -n "$target_alias" && test "$program_prefix$program_suffix$program_transform_name" = \ NONENONEs,x,x, && program_prefix=${target_alias}- - -if test "$program_transform_name" = s,x,x,; then - program_transform_name= -else - # Double any \ or $. echo might interpret backslashes. - cat <<\EOF_SED > conftestsed -s,\\,\\\\,g; s,\$,$$,g -EOF_SED - program_transform_name="`echo $program_transform_name|sed -f conftestsed`" - rm -f conftestsed -fi test "$program_prefix" != NONE && - program_transform_name="s,^,${program_prefix},; $program_transform_name" + program_transform_name="s,^,$program_prefix,;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && - program_transform_name="s,\$\$,${program_suffix},; $program_transform_name" - -# sed with no file args requires a program. -test "$program_transform_name" = "" && program_transform_name="s,x,x," + program_transform_name="s,\$,$program_suffix,;$program_transform_name" +# Double any \ or $. echo might interpret backslashes. +# By default was `s,x,x', remove it if useless. +cat <<\_ACEOF >conftest.sed +s/[\\$]/&&/g;s/;s,x,x,$// +_ACEOF +program_transform_name=`echo $program_transform_name | sed -f conftest.sed` +rm conftest.sed . ${srcdir}/../../bfd/configure.host + ac_config_headers="$ac_config_headers config.h:config.in" -echo $ac_n "checking for st_blksize in struct stat""... $ac_c" 1>&6 -echo "configure:3721: checking for st_blksize in struct stat" >&5 -if eval "test \"`echo '$''{'ac_cv_struct_st_blksize'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -#include -int main() { -struct stat s; s.st_blksize; -; return 0; } -EOF -if { (eval echo configure:3734: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_struct_st_blksize=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_struct_st_blksize=no -fi -rm -f conftest* -fi -echo "$ac_t""$ac_cv_struct_st_blksize" 1>&6 -if test $ac_cv_struct_st_blksize = yes; then - cat >> confdefs.h <<\EOF +echo "$as_me:$LINENO: checking for struct stat.st_blksize" >&5 +echo $ECHO_N "checking for struct stat.st_blksize... $ECHO_C" >&6 +if test "${ac_cv_member_struct_stat_st_blksize+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static struct stat ac_aggr; +if (ac_aggr.st_blksize) +return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_member_struct_stat_st_blksize=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static struct stat ac_aggr; +if (sizeof ac_aggr.st_blksize) +return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_member_struct_stat_st_blksize=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_member_struct_stat_st_blksize=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_member_struct_stat_st_blksize" >&5 +echo "${ECHO_T}$ac_cv_member_struct_stat_st_blksize" >&6 +if test $ac_cv_member_struct_stat_st_blksize = yes; then + +cat >>confdefs.h <<_ACEOF +#define HAVE_STRUCT_STAT_ST_BLKSIZE 1 +_ACEOF + + +cat >>confdefs.h <<\_ACEOF #define HAVE_ST_BLKSIZE 1 -EOF +_ACEOF fi -echo $ac_n "checking for st_blocks in struct stat""... $ac_c" 1>&6 -echo "configure:3755: checking for st_blocks in struct stat" >&5 -if eval "test \"`echo '$''{'ac_cv_struct_st_blocks'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -#include -int main() { -struct stat s; s.st_blocks; -; return 0; } -EOF -if { (eval echo configure:3768: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_struct_st_blocks=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_struct_st_blocks=no -fi -rm -f conftest* -fi -echo "$ac_t""$ac_cv_struct_st_blocks" 1>&6 -if test $ac_cv_struct_st_blocks = yes; then - cat >> confdefs.h <<\EOF +echo "$as_me:$LINENO: checking for struct stat.st_blocks" >&5 +echo $ECHO_N "checking for struct stat.st_blocks... $ECHO_C" >&6 +if test "${ac_cv_member_struct_stat_st_blocks+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static struct stat ac_aggr; +if (ac_aggr.st_blocks) +return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_member_struct_stat_st_blocks=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static struct stat ac_aggr; +if (sizeof ac_aggr.st_blocks) +return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_member_struct_stat_st_blocks=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_member_struct_stat_st_blocks=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_member_struct_stat_st_blocks" >&5 +echo "${ECHO_T}$ac_cv_member_struct_stat_st_blocks" >&6 +if test $ac_cv_member_struct_stat_st_blocks = yes; then + +cat >>confdefs.h <<_ACEOF +#define HAVE_STRUCT_STAT_ST_BLOCKS 1 +_ACEOF + + +cat >>confdefs.h <<\_ACEOF #define HAVE_ST_BLOCKS 1 -EOF +_ACEOF else - LIBOBJS="$LIBOBJS fileblocks.${ac_objext}" -fi + case $LIBOBJS in + "fileblocks.$ac_objext" | \ + *" fileblocks.$ac_objext" | \ + "fileblocks.$ac_objext "* | \ + *" fileblocks.$ac_objext "* ) ;; + *) LIBOBJS="$LIBOBJS fileblocks.$ac_objext" ;; +esac -echo $ac_n "checking for st_rdev in struct stat""... $ac_c" 1>&6 -echo "configure:3791: checking for st_rdev in struct stat" >&5 -if eval "test \"`echo '$''{'ac_cv_struct_st_rdev'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -#include -int main() { -struct stat s; s.st_rdev; -; return 0; } -EOF -if { (eval echo configure:3804: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_struct_st_rdev=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_struct_st_rdev=no -fi -rm -f conftest* fi -echo "$ac_t""$ac_cv_struct_st_rdev" 1>&6 -if test $ac_cv_struct_st_rdev = yes; then - cat >> confdefs.h <<\EOF + + +echo "$as_me:$LINENO: checking for struct stat.st_rdev" >&5 +echo $ECHO_N "checking for struct stat.st_rdev... $ECHO_C" >&6 +if test "${ac_cv_member_struct_stat_st_rdev+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static struct stat ac_aggr; +if (ac_aggr.st_rdev) +return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_member_struct_stat_st_rdev=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static struct stat ac_aggr; +if (sizeof ac_aggr.st_rdev) +return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_member_struct_stat_st_rdev=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_member_struct_stat_st_rdev=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_member_struct_stat_st_rdev" >&5 +echo "${ECHO_T}$ac_cv_member_struct_stat_st_rdev" >&6 +if test $ac_cv_member_struct_stat_st_rdev = yes; then + +cat >>confdefs.h <<_ACEOF +#define HAVE_STRUCT_STAT_ST_RDEV 1 +_ACEOF + + +cat >>confdefs.h <<\_ACEOF #define HAVE_ST_RDEV 1 -EOF +_ACEOF fi -echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6 -echo "configure:3825: checking whether struct tm is in sys/time.h or time.h" >&5 -if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 + +echo "$as_me:$LINENO: checking whether struct tm is in sys/time.h or time.h" >&5 +echo $ECHO_N "checking whether struct tm is in sys/time.h or time.h... $ECHO_C" >&6 +if test "${ac_cv_struct_tm+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include #include -int main() { + +int +main () +{ struct tm *tp; tp->tm_sec; -; return 0; } -EOF -if { (eval echo configure:3838: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_struct_tm=time.h else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_struct_tm=sys/time.h + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_struct_tm=sys/time.h fi -rm -f conftest* +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi - -echo "$ac_t""$ac_cv_struct_tm" 1>&6 +echo "$as_me:$LINENO: result: $ac_cv_struct_tm" >&5 +echo "${ECHO_T}$ac_cv_struct_tm" >&6 if test $ac_cv_struct_tm = sys/time.h; then - cat >> confdefs.h <<\EOF + +cat >>confdefs.h <<\_ACEOF #define TM_IN_SYS_TIME 1 -EOF +_ACEOF fi -echo $ac_n "checking for tm_zone in struct tm""... $ac_c" 1>&6 -echo "configure:3859: checking for tm_zone in struct tm" >&5 -if eval "test \"`echo '$''{'ac_cv_struct_tm_zone'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking for struct tm.tm_zone" >&5 +echo $ECHO_N "checking for struct tm.tm_zone... $ECHO_C" >&6 +if test "${ac_cv_member_struct_tm_tm_zone+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include #include <$ac_cv_struct_tm> -int main() { -struct tm tm; tm.tm_zone; -; return 0; } -EOF -if { (eval echo configure:3872: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_struct_tm_zone=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_struct_tm_zone=no -fi -rm -f conftest* -fi -echo "$ac_t""$ac_cv_struct_tm_zone" 1>&6 -if test "$ac_cv_struct_tm_zone" = yes; then - cat >> confdefs.h <<\EOF + +int +main () +{ +static struct tm ac_aggr; +if (ac_aggr.tm_zone) +return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_member_struct_tm_tm_zone=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include <$ac_cv_struct_tm> + + +int +main () +{ +static struct tm ac_aggr; +if (sizeof ac_aggr.tm_zone) +return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_member_struct_tm_tm_zone=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_member_struct_tm_tm_zone=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_member_struct_tm_tm_zone" >&5 +echo "${ECHO_T}$ac_cv_member_struct_tm_tm_zone" >&6 +if test $ac_cv_member_struct_tm_tm_zone = yes; then + +cat >>confdefs.h <<_ACEOF +#define HAVE_STRUCT_TM_TM_ZONE 1 +_ACEOF + + +fi + +if test "$ac_cv_member_struct_tm_tm_zone" = yes; then + +cat >>confdefs.h <<\_ACEOF #define HAVE_TM_ZONE 1 -EOF +_ACEOF else - echo $ac_n "checking for tzname""... $ac_c" 1>&6 -echo "configure:3892: checking for tzname" >&5 -if eval "test \"`echo '$''{'ac_cv_var_tzname'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 + echo "$as_me:$LINENO: checking for tzname" >&5 +echo $ECHO_N "checking for tzname... $ECHO_C" >&6 +if test "${ac_cv_var_tzname+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include #ifndef tzname /* For SGI. */ extern char *tzname[]; /* RS6000 and others reject char **tzname. */ #endif -int main() { + +int +main () +{ atoi(*tzname); -; return 0; } -EOF -if { (eval echo configure:3907: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_var_tzname=yes else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_var_tzname=no + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_var_tzname=no fi -rm -f conftest* +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext fi - -echo "$ac_t""$ac_cv_var_tzname" 1>&6 +echo "$as_me:$LINENO: result: $ac_cv_var_tzname" >&5 +echo "${ECHO_T}$ac_cv_var_tzname" >&6 if test $ac_cv_var_tzname = yes; then - cat >> confdefs.h <<\EOF + +cat >>confdefs.h <<\_ACEOF #define HAVE_TZNAME 1 -EOF +_ACEOF fi fi -echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6 -echo "configure:3930: checking for uid_t in sys/types.h" >&5 -if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking for uid_t in sys/types.h" >&5 +echo $ECHO_N "checking for uid_t in sys/types.h... $ECHO_C" >&6 +if test "${ac_cv_type_uid_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include -EOF + +_ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "uid_t" >/dev/null 2>&1; then - rm -rf conftest* + $EGREP "uid_t" >/dev/null 2>&1; then ac_cv_type_uid_t=yes else - rm -rf conftest* ac_cv_type_uid_t=no fi rm -f conftest* fi - -echo "$ac_t""$ac_cv_type_uid_t" 1>&6 +echo "$as_me:$LINENO: result: $ac_cv_type_uid_t" >&5 +echo "${ECHO_T}$ac_cv_type_uid_t" >&6 if test $ac_cv_type_uid_t = no; then - cat >> confdefs.h <<\EOF + +cat >>confdefs.h <<\_ACEOF #define uid_t int -EOF +_ACEOF - cat >> confdefs.h <<\EOF + +cat >>confdefs.h <<\_ACEOF #define gid_t int -EOF +_ACEOF fi -echo $ac_n "checking type of array argument to getgroups""... $ac_c" 1>&6 -echo "configure:3964: checking type of array argument to getgroups" >&5 -if eval "test \"`echo '$''{'ac_cv_type_getgroups'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking type of array argument to getgroups" >&5 +echo $ECHO_N "checking type of array argument to getgroups... $ECHO_C" >&6 +if test "${ac_cv_type_getgroups+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else if test "$cross_compiling" = yes; then ac_cv_type_getgroups=cross else - cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ /* Thanks to Mike Rendell for this test. */ #include #define NGID 256 #undef MAX #define MAX(x, y) ((x) > (y) ? (x) : (y)) -main() + +int +main () { gid_t gidset[NGID]; int i, n; @@ -3986,161 +7423,275 @@ main() for (i = 0; i < NGID; i++) gidset[i] = val.gval; n = getgroups (sizeof (gidset) / MAX (sizeof (int), sizeof (gid_t)) - 1, - gidset); + gidset); /* Exit non-zero if getgroups seems to require an array of ints. This happens when gid_t is short but getgroups modifies an array of ints. */ exit ((n > 0 && gidset[n] != val.gval) ? 1 : 0); } - -EOF -if { (eval echo configure:3997: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null -then - ac_cv_type_getgroups=gid_t +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_type_getgroups=gid_t else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - ac_cv_type_getgroups=int + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_type_getgroups=int fi -rm -fr conftest* +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi - if test $ac_cv_type_getgroups = cross; then - cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include -EOF + +_ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "getgroups.*int.*gid_t" >/dev/null 2>&1; then - rm -rf conftest* + $EGREP "getgroups.*int.*gid_t" >/dev/null 2>&1; then ac_cv_type_getgroups=gid_t else - rm -rf conftest* ac_cv_type_getgroups=int fi rm -f conftest* fi fi +echo "$as_me:$LINENO: result: $ac_cv_type_getgroups" >&5 +echo "${ECHO_T}$ac_cv_type_getgroups" >&6 -echo "$ac_t""$ac_cv_type_getgroups" 1>&6 -cat >> confdefs.h <>confdefs.h <<_ACEOF #define GETGROUPS_T $ac_cv_type_getgroups -EOF +_ACEOF -echo $ac_n "checking for mode_t""... $ac_c" 1>&6 -echo "configure:4035: checking for mode_t" >&5 -if eval "test \"`echo '$''{'ac_cv_type_mode_t'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking for mode_t" >&5 +echo $ECHO_N "checking for mode_t... $ECHO_C" >&6 +if test "${ac_cv_type_mode_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat > conftest.$ac_ext < -#if STDC_HEADERS -#include -#include -#endif -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "(^|[^a-zA-Z_0-9])mode_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then - rm -rf conftest* + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +if ((mode_t *) 0) + return 0; +if (sizeof (mode_t)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_type_mode_t=yes else - rm -rf conftest* - ac_cv_type_mode_t=no -fi -rm -f conftest* + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 +ac_cv_type_mode_t=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$ac_t""$ac_cv_type_mode_t" 1>&6 -if test $ac_cv_type_mode_t = no; then - cat >> confdefs.h <<\EOF +echo "$as_me:$LINENO: result: $ac_cv_type_mode_t" >&5 +echo "${ECHO_T}$ac_cv_type_mode_t" >&6 +if test $ac_cv_type_mode_t = yes; then + : +else + +cat >>confdefs.h <<_ACEOF #define mode_t int -EOF +_ACEOF fi -echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:4068: checking for off_t" >&5 -if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking for off_t" >&5 +echo $ECHO_N "checking for off_t... $ECHO_C" >&6 +if test "${ac_cv_type_off_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat > conftest.$ac_ext < -#if STDC_HEADERS -#include -#include -#endif -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then - rm -rf conftest* + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +if ((off_t *) 0) + return 0; +if (sizeof (off_t)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_type_off_t=yes else - rm -rf conftest* - ac_cv_type_off_t=no -fi -rm -f conftest* + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 +ac_cv_type_off_t=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$ac_t""$ac_cv_type_off_t" 1>&6 -if test $ac_cv_type_off_t = no; then - cat >> confdefs.h <<\EOF +echo "$as_me:$LINENO: result: $ac_cv_type_off_t" >&5 +echo "${ECHO_T}$ac_cv_type_off_t" >&6 +if test $ac_cv_type_off_t = yes; then + : +else + +cat >>confdefs.h <<_ACEOF #define off_t long -EOF +_ACEOF fi -echo $ac_n "checking for pid_t""... $ac_c" 1>&6 -echo "configure:4101: checking for pid_t" >&5 -if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking for pid_t" >&5 +echo $ECHO_N "checking for pid_t... $ECHO_C" >&6 +if test "${ac_cv_type_pid_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat > conftest.$ac_ext < -#if STDC_HEADERS -#include -#include -#endif -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "(^|[^a-zA-Z_0-9])pid_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then - rm -rf conftest* + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +if ((pid_t *) 0) + return 0; +if (sizeof (pid_t)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_type_pid_t=yes else - rm -rf conftest* - ac_cv_type_pid_t=no -fi -rm -f conftest* + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 +ac_cv_type_pid_t=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$ac_t""$ac_cv_type_pid_t" 1>&6 -if test $ac_cv_type_pid_t = no; then - cat >> confdefs.h <<\EOF +echo "$as_me:$LINENO: result: $ac_cv_type_pid_t" >&5 +echo "${ECHO_T}$ac_cv_type_pid_t" >&6 +if test $ac_cv_type_pid_t = yes; then + : +else + +cat >>confdefs.h <<_ACEOF #define pid_t int -EOF +_ACEOF fi -echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 -echo "configure:4134: checking return type of signal handlers" >&5 -if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking return type of signal handlers" >&5 +echo $ECHO_N "checking return type of signal handlers... $ECHO_C" >&6 +if test "${ac_cv_type_signal+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include #include #ifdef signal -#undef signal +# undef signal #endif #ifdef __cplusplus extern "C" void (*signal (int, void (*)(int)))(int); @@ -4148,384 +7699,930 @@ extern "C" void (*signal (int, void (*)(int)))(int); void (*signal ()) (); #endif -int main() { +int +main () +{ int i; -; return 0; } -EOF -if { (eval echo configure:4156: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_type_signal=void else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_type_signal=int + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_type_signal=int fi -rm -f conftest* +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi +echo "$as_me:$LINENO: result: $ac_cv_type_signal" >&5 +echo "${ECHO_T}$ac_cv_type_signal" >&6 -echo "$ac_t""$ac_cv_type_signal" 1>&6 -cat >> confdefs.h <>confdefs.h <<_ACEOF #define RETSIGTYPE $ac_cv_type_signal -EOF +_ACEOF -echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:4175: checking for size_t" >&5 -if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking for size_t" >&5 +echo $ECHO_N "checking for size_t... $ECHO_C" >&6 +if test "${ac_cv_type_size_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat > conftest.$ac_ext < -#if STDC_HEADERS -#include -#include -#endif -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then - rm -rf conftest* + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +if ((size_t *) 0) + return 0; +if (sizeof (size_t)) + return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_type_size_t=yes else - rm -rf conftest* - ac_cv_type_size_t=no -fi -rm -f conftest* + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 +ac_cv_type_size_t=no fi -echo "$ac_t""$ac_cv_type_size_t" 1>&6 -if test $ac_cv_type_size_t = no; then - cat >> confdefs.h <<\EOF +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5 +echo "${ECHO_T}$ac_cv_type_size_t" >&6 +if test $ac_cv_type_size_t = yes; then + : +else + +cat >>confdefs.h <<_ACEOF #define size_t unsigned -EOF +_ACEOF fi -echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6 -echo "configure:4208: checking for uid_t in sys/types.h" >&5 -if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking for uid_t in sys/types.h" >&5 +echo $ECHO_N "checking for uid_t in sys/types.h... $ECHO_C" >&6 +if test "${ac_cv_type_uid_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include -EOF + +_ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "uid_t" >/dev/null 2>&1; then - rm -rf conftest* + $EGREP "uid_t" >/dev/null 2>&1; then ac_cv_type_uid_t=yes else - rm -rf conftest* ac_cv_type_uid_t=no fi rm -f conftest* fi - -echo "$ac_t""$ac_cv_type_uid_t" 1>&6 +echo "$as_me:$LINENO: result: $ac_cv_type_uid_t" >&5 +echo "${ECHO_T}$ac_cv_type_uid_t" >&6 if test $ac_cv_type_uid_t = no; then - cat >> confdefs.h <<\EOF + +cat >>confdefs.h <<\_ACEOF #define uid_t int -EOF +_ACEOF + - cat >> confdefs.h <<\EOF +cat >>confdefs.h <<\_ACEOF #define gid_t int -EOF +_ACEOF fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + for ac_func in access cfgetispeed cfgetospeed cfsetispeed cfsetospeed chdir chmod chown dup dup2 fchmod fchown fcntl fstat fstatfs getdirentries getegid geteuid getgid getpid getppid getrusage gettimeofday getuid ioctl kill link lseek lstat mkdir pipe readlink rmdir setreuid setregid stat sigprocmask stat symlink tcgetattr tcsetattr tcsendbreak tcdrain tcflush tcflow tcgetpgrp tcsetpgrp time umask unlink do -echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4245: checking for $ac_func" >&5 -if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +if eval "test \"\${$as_ac_var+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + /* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func(); below. */ -#include -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char $ac_func(); + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif -int main() { +#undef $ac_func +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else -$ac_func(); +char (*f) () = $ac_func; +#endif +#ifdef __cplusplus +} #endif -; return 0; } -EOF -if { (eval echo configure:4273: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_func_$ac_func=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func_$ac_func=no" -fi -rm -f conftest* -fi +int +main () +{ +return f != $ac_func; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_var=no" +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF -if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` - cat >> confdefs.h <&6 fi done -for ac_hdr in fcntl.h stdlib.h string.h strings.h sys/ioctl.h sys/mount.h sys/param.h sys/resource.h sys/stat.h sys/termio.h sys/termios.h sys/time.h sys/times.h sys/types.h time.h unistd.h sys/vfs.h sys/statfs.h + + + + + + + + + + + + + + + + + + +for ac_header in fcntl.h stdlib.h string.h strings.h sys/ioctl.h sys/mount.h sys/param.h sys/resource.h sys/stat.h sys/termio.h sys/termios.h sys/time.h sys/times.h sys/types.h time.h unistd.h sys/vfs.h sys/statfs.h do -ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:4302: checking for $ac_hdr" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:4312: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_c_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes fi -rm -f conftest* +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` - cat >> confdefs.h <&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------------ ## +## Report this to the AC_PACKAGE_NAME lists. ## +## ------------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - echo "$ac_t""no" 1>&6 + eval "$as_ac_Header=\$ac_header_preproc" +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 + +fi +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + fi + done + + + + + ac_header_dirent=no -for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h -do -ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6 -echo "configure:4343: checking for $ac_hdr that defines DIR" >&5 -if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5 +echo $ECHO_N "checking for $ac_hdr that defines DIR... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include #include <$ac_hdr> -int main() { -DIR *dirp = 0; -; return 0; } -EOF -if { (eval echo configure:4356: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - eval "ac_cv_header_dirent_$ac_safe=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_dirent_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_dirent_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` - cat >> confdefs.h <&6 + +int +main () +{ +if ((DIR *) 0) +return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_Header=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_Header=no" +fi +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_hdr" | $as_tr_cpp` 1 +_ACEOF + +ac_header_dirent=$ac_hdr; break fi + done # Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. if test $ac_header_dirent = dirent.h; then -echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6 -echo "configure:4381: checking for opendir in -ldir" >&5 -ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-ldir $LIBS" -cat > conftest.$ac_ext <&5 +echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6 +if test "${ac_cv_search_opendir+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_func_search_save_LIBS=$LIBS +ac_cv_search_opendir=no +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + /* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif /* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char opendir(); - -int main() { -opendir() -; return 0; } -EOF -if { (eval echo configure:4400: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" + builtin and then its argument prototype would still apply. */ +char opendir (); +int +main () +{ +opendir (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_search_opendir="none required" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test "$ac_cv_search_opendir" = no; then + for ac_lib in dir; do + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char opendir (); +int +main () +{ +opendir (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_search_opendir="-l$ac_lib" +break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + done fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - LIBS="$LIBS -ldir" -else - echo "$ac_t""no" 1>&6 +LIBS=$ac_func_search_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5 +echo "${ECHO_T}$ac_cv_search_opendir" >&6 +if test "$ac_cv_search_opendir" != no; then + test "$ac_cv_search_opendir" = "none required" || LIBS="$ac_cv_search_opendir $LIBS" + fi else -echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6 -echo "configure:4422: checking for opendir in -lx" >&5 -ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 + echo "$as_me:$LINENO: checking for library containing opendir" >&5 +echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6 +if test "${ac_cv_search_opendir+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - ac_save_LIBS="$LIBS" -LIBS="-lx $LIBS" -cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + /* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif /* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char opendir(); - -int main() { -opendir() -; return 0; } -EOF -if { (eval echo configure:4441: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" + builtin and then its argument prototype would still apply. */ +char opendir (); +int +main () +{ +opendir (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_search_opendir="none required" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +if test "$ac_cv_search_opendir" = no; then + for ac_lib in x; do + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char opendir (); +int +main () +{ +opendir (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_search_opendir="-l$ac_lib" +break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + done fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - LIBS="$LIBS -lx" -else - echo "$ac_t""no" 1>&6 +LIBS=$ac_func_search_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5 +echo "${ECHO_T}$ac_cv_search_opendir" >&6 +if test "$ac_cv_search_opendir" != no; then + test "$ac_cv_search_opendir" = "none required" || LIBS="$ac_cv_search_opendir $LIBS" + fi fi sim_termio="" -echo $ac_n "checking for struct termios""... $ac_c" 1>&6 -echo "configure:4466: checking for struct termios" >&5 -if eval "test \"`echo '$''{'ac_cv_termios_struct'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5 +echo $ECHO_N "checking for struct termios... $ECHO_C" >&6 +if test "${ac_cv_termios_struct+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include #include -int main() { +int +main () +{ static struct termios x; x.c_iflag = 0; x.c_oflag = 0; x.c_cflag = 0; x.c_lflag = 0; x.c_cc[NCCS] = 0; -; return 0; } -EOF -if { (eval echo configure:4484: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_termios_struct=yes else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_termios_struct=no + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_termios_struct=no fi -rm -f conftest* +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$ac_t""$ac_cv_termios_struct" 1>&6 +echo "$as_me:$LINENO: result: $ac_cv_termios_struct" >&5 +echo "${ECHO_T}$ac_cv_termios_struct" >&6 if test $ac_cv_termios_struct = yes; then sim_termio="$sim_termio -DHAVE_TERMIOS_STRUCTURE" fi if test "$ac_cv_termios_struct" = "yes"; then - echo $ac_n "checking for c_line field in struct termios""... $ac_c" 1>&6 -echo "configure:4503: checking for c_line field in struct termios" >&5 - if eval "test \"`echo '$''{'ac_cv_termios_cline'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5 +echo $ECHO_N "checking for c_line field in struct termios... $ECHO_C" >&6 + if test "${ac_cv_termios_cline+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include #include -int main() { +int +main () +{ static struct termios x; x.c_line = 0; -; return 0; } -EOF -if { (eval echo configure:4516: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_termios_cline=yes else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_termios_cline=no + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_termios_cline=no fi -rm -f conftest* +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi - echo "$ac_t""$ac_cv_termios_cline" 1>&6 + echo "$as_me:$LINENO: result: $ac_cv_termios_cline" >&5 +echo "${ECHO_T}$ac_cv_termios_cline" >&6 if test $ac_cv_termios_cline = yes; then sim_termio="$sim_termio -DHAVE_TERMIOS_CLINE" fi @@ -4534,38 +8631,66 @@ else fi if test "$ac_cv_termios_struct" != "yes"; then - echo $ac_n "checking for struct termio""... $ac_c" 1>&6 -echo "configure:4539: checking for struct termio" >&5 - if eval "test \"`echo '$''{'ac_cv_termio_struct'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5 +echo $ECHO_N "checking for struct termio... $ECHO_C" >&6 + if test "${ac_cv_termio_struct+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include #include -int main() { +int +main () +{ static struct termio x; x.c_iflag = 0; x.c_oflag = 0; x.c_cflag = 0; x.c_lflag = 0; x.c_cc[NCC] = 0; -; return 0; } -EOF -if { (eval echo configure:4557: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_termio_struct=yes else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_termio_struct=no + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_termio_struct=no fi -rm -f conftest* +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi - echo "$ac_t""$ac_cv_termio_struct" 1>&6 + echo "$as_me:$LINENO: result: $ac_cv_termio_struct" >&5 +echo "${ECHO_T}$ac_cv_termio_struct" >&6 if test $ac_cv_termio_struct = yes; then sim_termio="$sim_termio -DHAVE_TERMIO_STRUCTURE" fi @@ -4574,34 +8699,62 @@ else fi if test "$ac_cv_termio_struct" = "yes"; then - echo $ac_n "checking for c_line field in struct termio""... $ac_c" 1>&6 -echo "configure:4579: checking for c_line field in struct termio" >&5 - if eval "test \"`echo '$''{'ac_cv_termio_cline'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5 +echo $ECHO_N "checking for c_line field in struct termio... $ECHO_C" >&6 + if test "${ac_cv_termio_cline+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include #include -int main() { +int +main () +{ static struct termio x; x.c_line = 0; -; return 0; } -EOF -if { (eval echo configure:4592: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_termio_cline=yes else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_termio_cline=no + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_termio_cline=no fi -rm -f conftest* +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi - echo "$ac_t""$ac_cv_termio_cline" 1>&6 + echo "$as_me:$LINENO: result: $ac_cv_termio_cline" >&5 +echo "${ECHO_T}$ac_cv_termio_cline" >&6 if test $ac_cv_termio_cline = yes; then sim_termio="$sim_termio -DHAVE_TERMIO_CLINE" fi @@ -4609,14 +8762,17 @@ else ac_cv_termio_cline=no fi -echo $ac_n "checking for struct statfs""... $ac_c" 1>&6 -echo "configure:4614: checking for struct statfs" >&5 -if eval "test \"`echo '$''{'ac_cv_struct_statfs'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking for struct statfs" >&5 +echo $ECHO_N "checking for struct statfs... $ECHO_C" >&6 +if test "${ac_cv_struct_statfs+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include #ifdef HAVE_SYS_PARAM_H #include @@ -4630,42 +8786,71 @@ else #ifdef HAVE_SYS_STATFS_H #include #endif -int main() { +int +main () +{ static struct statfs s; -; return 0; } -EOF -if { (eval echo configure:4638: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_struct_statfs=yes else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_struct_statfs=no + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_struct_statfs=no fi -rm -f conftest* +rm -f conftest.err conftest.$ac_objext conftest.$ac_ext fi -echo "$ac_t""$ac_cv_struct_statfs" 1>&6 +echo "$as_me:$LINENO: result: $ac_cv_struct_statfs" >&5 +echo "${ECHO_T}$ac_cv_struct_statfs" >&6 if test $ac_cv_struct_statfs = yes; then - cat >> confdefs.h <<\EOF + +cat >>confdefs.h <<\_ACEOF #define HAVE_STRUCT_STATFS 1 -EOF +_ACEOF fi sim_devzero="" -echo $ac_n "checking for /dev/zero""... $ac_c" 1>&6 -echo "configure:4660: checking for /dev/zero" >&5 -if eval "test \"`echo '$''{'ac_cv_devzero'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +echo "$as_me:$LINENO: checking for /dev/zero" >&5 +echo $ECHO_N "checking for /dev/zero... $ECHO_C" >&6 +if test "${ac_cv_devzero+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else if test "$cross_compiling" = yes; then ac_cv_devzero=no else - cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ #include main () { char buf[2048]; @@ -4682,146 +8867,67 @@ main () { return 1; return 0; } -EOF -if { (eval echo configure:4687: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null -then +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then ac_cv_devzero=yes else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - ac_cv_devzero=no + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_devzero=no fi -rm -fr conftest* +rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi - fi -echo "$ac_t""$ac_cv_devzero" 1>&6 +echo "$as_me:$LINENO: result: $ac_cv_devzero" >&5 +echo "${ECHO_T}$ac_cv_devzero" >&6 if test $ac_cv_devzero = yes; then sim_devzero="-DHAVE_DEVZERO" else sim_devzero="" fi -echo $ac_n "checking for common simulator directory""... $ac_c" 1>&6 -echo "configure:4709: checking for common simulator directory" >&5 +echo "$as_me:$LINENO: checking for common simulator directory" >&5 +echo $ECHO_N "checking for common simulator directory... $ECHO_C" >&6 if test -f "${srcdir}/../common/callback.c"; then - echo "$ac_t""yes" 1>&6 + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 sim_callback="callback.o targ-map.o" sim_targ_vals="targ-vals.h targ-map.c targ-vals.def" else - echo "$ac_t""no" 1>&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 sim_callback="" sim_targ_vals="" fi -echo $ac_n "checking for common simulator directory fpu implementation""... $ac_c" 1>&6 -echo "configure:4721: checking for common simulator directory fpu implementation" >&5 +echo "$as_me:$LINENO: checking for common simulator directory fpu implementation" >&5 +echo $ECHO_N "checking for common simulator directory fpu implementation... $ECHO_C" >&6 if test -f "${srcdir}/../common/sim-fpu.c"; then - echo "$ac_t""yes" 1>&6 + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 sim_fpu_cflags="-DHAVE_COMMON_FPU -I../common -I${srcdir}/../common" sim_fpu="sim-fpu.o" else - echo "$ac_t""no" 1>&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 sim_fpu_cflags= - sim_fpu= -fi - -echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 -echo "configure:4733: checking for Cygwin environment" >&5 -if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_cygwin=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_cygwin=no -fi -rm -f conftest* -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_cygwin" 1>&6 -CYGWIN= -test "$ac_cv_cygwin" = yes && CYGWIN=yes -echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 -echo "configure:4766: checking for mingw32 environment" >&5 -if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_mingw32=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_mingw32=no -fi -rm -f conftest* -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_mingw32" 1>&6 -MINGW32= -test "$ac_cv_mingw32" = yes && MINGW32=yes - - -echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:4797: checking for executable suffix" >&5 -if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test "$CYGWIN" = yes || test "$MINGW32" = yes; then - ac_cv_exeext=.exe -else - rm -f conftest* - echo 'int main () { return 0; }' > conftest.$ac_ext - ac_cv_exeext= - if { (eval echo configure:4807: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then - for file in conftest.*; do - case $file in - *.c | *.o | *.obj | *.ilk | *.pdb) ;; - *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; - esac - done - else - { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } - fi - rm -f conftest* - test x"${ac_cv_exeext}" = x && ac_cv_exeext=no -fi + sim_fpu= fi -EXEEXT="" -test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} -echo "$ac_t""${ac_cv_exeext}" 1>&6 -ac_exeext=$EXEEXT @@ -4829,34 +8935,84 @@ ac_exeext=$EXEEXT AR=${AR-ar} -# Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4836: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_RANLIB="ranlib" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + fi fi -RANLIB="$ac_cv_prog_RANLIB" +RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then - echo "$ac_t""$RANLIB" 1>&6 + echo "$as_me:$LINENO: result: $RANLIB" >&5 +echo "${ECHO_T}$RANLIB" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +echo "${ECHO_T}$ac_ct_RANLIB" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + RANLIB=$ac_ct_RANLIB else - echo "$ac_t""no" 1>&6 + RANLIB="$ac_cv_prog_RANLIB" fi @@ -4904,456 +9060,1336 @@ fi -trap '' 1 2 15 -cat > confcache <<\EOF + ac_config_files="$ac_config_files Makefile" + ac_config_commands="$ac_config_commands default" +cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure -# scripts and configure runs. It is not useful on other systems. -# If it contains results you don't want to keep, you may remove or edit it. +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. # -# By default, configure uses ./config.cache as the cache file, -# creating it if it does not exist already. You can give configure -# the --cache-file=FILE option to use a different cache file; that is -# what configure does when it calls configure scripts in -# subdirectories, so they share the cache. -# Giving --cache-file=/dev/null disables caching, for debugging configure. -# config.status only pays attention to the cache file if you give it the -# --recheck option to rerun configure. +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. # -EOF +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. -(set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote substitution - # turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - -e "s/'/'\\\\''/g" \ - -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' - ;; - esac >> confcache -if cmp -s $cache_file confcache; then - : -else +{ + (set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; +} | + sed ' + t clear + : clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + : end' >>confcache +if diff $cache_file confcache >/dev/null 2>&1; then :; else if test -w $cache_file; then - echo "updating cache $cache_file" - cat confcache > $cache_file + test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" + cat confcache >$cache_file else echo "not updating unwritable cache $cache_file" fi fi rm -f confcache -trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 - test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' -# Any assignment to VPATH causes Sun make to only execute -# the first set of double-colon rules, so remove it if not needed. -# If there is a colon in the path, we need to keep it. +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/; +s/:*\${srcdir}:*/:/; +s/:*@srcdir@:*/:/; +s/^\([^=]*=[ ]*\):*/\1/; +s/:*$//; +s/^[^=]*=[ ]*$//; +}' fi -trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 - DEFS=-DHAVE_CONFIG_H -# Without the "./", some shells look in PATH for config.status. -: ${CONFIG_STATUS=./config.status} +ac_libobjs= +ac_ltlibobjs= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_i=`echo "$ac_i" | + sed 's/\$U\././;s/\.o$//;s/\.obj$//'` + # 2. Add them. + ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs -echo creating $CONFIG_STATUS -rm -f $CONFIG_STATUS -cat > $CONFIG_STATUS <&5 +echo "$as_me: creating $CONFIG_STATUS" >&6;} +cat >$CONFIG_STATUS <<_ACEOF +#! $SHELL +# Generated by $as_me. # Run this file to recreate the current configuration. -# This directory was configured as follows, -# on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# -# $0 $ac_configure_args -# # Compiler output produced by configure, useful for debugging -# configure, is in ./config.log if it exists. +# configure, is in config.log if it exists. -ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" -for ac_option +debug=false +ac_cs_recheck=false +ac_cs_silent=false +SHELL=\${CONFIG_SHELL-$SHELL} +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi +DUALCASE=1; export DUALCASE # for MKS sh + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME do - case "\$ac_option" in - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" - exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; - -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.13" - exit 0 ;; - -help | --help | --hel | --he | --h) - echo "\$ac_cs_usage"; exit 0 ;; - *) echo "\$ac_cs_usage"; exit 1 ;; - esac + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi done -ac_given_srcdir=$srcdir -ac_given_INSTALL="$INSTALL" +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi -trap 'rm -fr `echo "Makefile config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 -EOF -cat >> $CONFIG_STATUS </dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi -# Protect against being on the right side of a sed subst in config.status. -sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g; - s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF -$ac_vpsub -$extrasub -s%@sim_environment@%$sim_environment%g -s%@sim_alignment@%$sim_alignment%g -s%@sim_assert@%$sim_assert%g -s%@sim_bitsize@%$sim_bitsize%g -s%@sim_endian@%$sim_endian%g -s%@sim_hostendian@%$sim_hostendian%g -s%@sim_float@%$sim_float%g -s%@sim_scache@%$sim_scache%g -s%@sim_default_model@%$sim_default_model%g -s%@sim_hw_cflags@%$sim_hw_cflags%g -s%@sim_hw_objs@%$sim_hw_objs%g -s%@sim_hw@%$sim_hw%g -s%@sim_inline@%$sim_inline%g -s%@sim_packages@%$sim_packages%g -s%@sim_regparm@%$sim_regparm%g -s%@sim_reserved_bits@%$sim_reserved_bits%g -s%@sim_smp@%$sim_smp%g -s%@sim_stdcall@%$sim_stdcall%g -s%@sim_xor_endian@%$sim_xor_endian%g -s%@WARN_CFLAGS@%$WARN_CFLAGS%g -s%@WERROR_CFLAGS@%$WERROR_CFLAGS%g -s%@SHELL@%$SHELL%g -s%@CFLAGS@%$CFLAGS%g -s%@CPPFLAGS@%$CPPFLAGS%g -s%@CXXFLAGS@%$CXXFLAGS%g -s%@FFLAGS@%$FFLAGS%g -s%@DEFS@%$DEFS%g -s%@LDFLAGS@%$LDFLAGS%g -s%@LIBS@%$LIBS%g -s%@exec_prefix@%$exec_prefix%g -s%@prefix@%$prefix%g -s%@program_transform_name@%$program_transform_name%g -s%@bindir@%$bindir%g -s%@sbindir@%$sbindir%g -s%@libexecdir@%$libexecdir%g -s%@datadir@%$datadir%g -s%@sysconfdir@%$sysconfdir%g -s%@sharedstatedir@%$sharedstatedir%g -s%@localstatedir@%$localstatedir%g -s%@libdir@%$libdir%g -s%@includedir@%$includedir%g -s%@oldincludedir@%$oldincludedir%g -s%@infodir@%$infodir%g -s%@mandir@%$mandir%g -s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g -s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g -s%@INSTALL_DATA@%$INSTALL_DATA%g -s%@CC@%$CC%g -s%@SET_MAKE@%$SET_MAKE%g -s%@RANLIB@%$RANLIB%g -s%@CPP@%$CPP%g -s%@ALLOCA@%$ALLOCA%g -s%@USE_NLS@%$USE_NLS%g -s%@MSGFMT@%$MSGFMT%g -s%@GMSGFMT@%$GMSGFMT%g -s%@XGETTEXT@%$XGETTEXT%g -s%@USE_INCLUDED_LIBINTL@%$USE_INCLUDED_LIBINTL%g -s%@CATALOGS@%$CATALOGS%g -s%@CATOBJEXT@%$CATOBJEXT%g -s%@DATADIRNAME@%$DATADIRNAME%g -s%@GMOFILES@%$GMOFILES%g -s%@INSTOBJEXT@%$INSTOBJEXT%g -s%@INTLDEPS@%$INTLDEPS%g -s%@INTLLIBS@%$INTLLIBS%g -s%@INTLOBJS@%$INTLOBJS%g -s%@POFILES@%$POFILES%g -s%@POSUB@%$POSUB%g -s%@INCLUDE_LOCALE_H@%$INCLUDE_LOCALE_H%g -s%@GT_NO@%$GT_NO%g -s%@GT_YES@%$GT_YES%g -s%@MKINSTALLDIRS@%$MKINSTALLDIRS%g -s%@l@%$l%g -s%@host@%$host%g -s%@host_alias@%$host_alias%g -s%@host_cpu@%$host_cpu%g -s%@host_vendor@%$host_vendor%g -s%@host_os@%$host_os%g -s%@target@%$target%g -s%@target_alias@%$target_alias%g -s%@target_cpu@%$target_cpu%g -s%@target_vendor@%$target_vendor%g -s%@target_os@%$target_os%g -s%@build@%$build%g -s%@build_alias@%$build_alias%g -s%@build_cpu@%$build_cpu%g -s%@build_vendor@%$build_vendor%g -s%@build_os@%$build_os%g -s%@LIBOBJS@%$LIBOBJS%g -s%@EXEEXT@%$EXEEXT%g -s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g -s%@HDEFINES@%$HDEFINES%g -s%@AR@%$AR%g -s%@sim_cflags@%$sim_cflags%g -s%@sim_warnings@%$sim_warnings%g -s%@sim_line_nr@%$sim_line_nr%g -s%@sim_config@%$sim_config%g -s%@sim_opcode@%$sim_opcode%g -s%@sim_switch@%$sim_switch%g -s%@sim_dup@%$sim_dup%g -s%@sim_decode_mechanism@%$sim_decode_mechanism%g -s%@sim_jump@%$sim_jump%g -s%@sim_filter@%$sim_filter%g -s%@sim_icache@%$sim_icache%g -s%@sim_hw_src@%$sim_hw_src%g -s%@sim_hw_obj@%$sim_hw_obj%g -s%@sim_pk_src@%$sim_pk_src%g -s%@sim_pk_obj@%$sim_pk_obj%g -s%@sim_bswap@%$sim_bswap%g -s%@sim_igen_smp@%$sim_igen_smp%g -s%@sim_hostbitsize@%$sim_hostbitsize%g -s%@sim_env@%$sim_env%g -s%@sim_timebase@%$sim_timebase%g -s%@sim_trace@%$sim_trace%g -s%@sim_reserved@%$sim_reserved%g -s%@sim_monitor@%$sim_monitor%g -s%@sim_model@%$sim_model%g -s%@sim_model_issue@%$sim_model_issue%g -s%@sim_stdio@%$sim_stdio%g -s%@sim_termio@%$sim_termio%g -s%@sim_devzero@%$sim_devzero%g -s%@sim_callback@%$sim_callback%g -s%@sim_targ_vals@%$sim_targ_vals%g -s%@sim_fpu_cflags@%$sim_fpu_cflags%g -s%@sim_fpu@%$sim_fpu%g -CEOF -EOF - -cat >> $CONFIG_STATUS <<\EOF - -# Split the substitutions into bite-sized pieces for seds with -# small command number limits, like on Digital OSF/1 and HP-UX. -ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. -ac_file=1 # Number of current file. -ac_beg=1 # First line for current file. -ac_end=$ac_max_sed_cmds # Line after last line for current file. -ac_more_lines=: -ac_sed_cmds="" -while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' else - sed "${ac_end}q" conftest.subs > conftest.s$ac_file + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 fi - if test ! -s conftest.s$ac_file; then - ac_more_lines=false - rm -f conftest.s$ac_file + if test ! -f "$as_myself"; then + { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 +echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 +echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' else - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f conftest.s$ac_file" - else - ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" - fi - ac_file=`expr $ac_file + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_cmds` + as_ln_s='ln -s' fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.file + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_executable_p="test -f" + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +# IFS +# We need space, tab and new line, in precisely that order. +as_nl=' +' +IFS=" $as_nl" + +# CDPATH. +$as_unset CDPATH + +exec 6>&1 + +# Open the log real soon, to keep \$[0] and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. Logging --version etc. is OK. +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX +} >&5 +cat >&5 <<_CSEOF + +This file was extended by $as_me, which was +generated by GNU Autoconf 2.59. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +_CSEOF +echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 +echo >&5 +_ACEOF + +# Files that config.status was made for. +if test -n "$ac_config_files"; then + echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_headers"; then + echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_links"; then + echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_commands"; then + echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS +fi + +cat >>$CONFIG_STATUS <<\_ACEOF + +ac_cs_usage="\ +\`$as_me' instantiates files from templates according to the +current configuration. + +Usage: $0 [OPTIONS] [FILE]... + + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Configuration commands: +$config_commands + +Report bugs to ." +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF +ac_cs_version="\\ +config.status +configured by $0, generated by GNU Autoconf 2.59, + with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" + +Copyright (C) 2003 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." +srcdir=$srcdir +INSTALL="$INSTALL" +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +# If no file are specified by the user, then we need to provide default +# value. By we need to know if files were specified by the user. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=*) + ac_option=`expr "x$1" : 'x\([^=]*\)='` + ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` + ac_shift=: + ;; + -*) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + *) # This is not an option, so the user has probably given explicit + # arguments. + ac_option=$1 + ac_need_defaults=false;; + esac + + case $ac_option in + # Handling of the options. +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --vers* | -V ) + echo "$ac_cs_version"; exit 0 ;; + --he | --h) + # Conflict between --help and --header + { { echo "$as_me:$LINENO: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&5 +echo "$as_me: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; };; + --help | --hel | -h ) + echo "$ac_cs_usage"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + CONFIG_FILES="$CONFIG_FILES $ac_optarg" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" + ac_need_defaults=false;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&5 +echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; } ;; + + *) ac_config_targets="$ac_config_targets $1" ;; + + esac + shift done -if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF +if \$ac_cs_recheck; then + echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 + exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion fi -EOF -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF -for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` - ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - *) ac_file_in="${ac_file}.in" ;; + + + + +cat >>$CONFIG_STATUS <<\_ACEOF +for ac_config_target in $ac_config_targets +do + case "$ac_config_target" in + # Handling of arguments. + "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "default" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;; + "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h:config.in" ;; + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; esac +done - # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason to put it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Create a temporary directory, and hook for its removal unless debugging. +$debug || +{ + trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 +} - # Remove last slash and all that follows it. Not all systems have dirname. - ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` - if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then - # The file is in a subdirectory. - test ! -d "$ac_dir" && mkdir "$ac_dir" - ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" - # A "../" for each directory in $ac_dir_suffix. - ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` - else - ac_dir_suffix= ac_dots= +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" +} || +{ + tmp=./confstat$$-$RANDOM + (umask 077 && mkdir $tmp) +} || +{ + echo "$me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } +} + +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF + +# +# CONFIG_FILES section. +# + +# No need to generate the scripts if there are no CONFIG_FILES. +# This happens for instance when ./config.status config.h +if test -n "\$CONFIG_FILES"; then + # Protect against being on the right side of a sed subst in config.status. + sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; + s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF +s,@sim_environment@,$sim_environment,;t t +s,@sim_alignment@,$sim_alignment,;t t +s,@sim_assert@,$sim_assert,;t t +s,@sim_bitsize@,$sim_bitsize,;t t +s,@sim_endian@,$sim_endian,;t t +s,@sim_hostendian@,$sim_hostendian,;t t +s,@sim_float@,$sim_float,;t t +s,@sim_scache@,$sim_scache,;t t +s,@sim_default_model@,$sim_default_model,;t t +s,@sim_hw_cflags@,$sim_hw_cflags,;t t +s,@sim_hw_objs@,$sim_hw_objs,;t t +s,@sim_hw@,$sim_hw,;t t +s,@sim_inline@,$sim_inline,;t t +s,@sim_packages@,$sim_packages,;t t +s,@sim_regparm@,$sim_regparm,;t t +s,@sim_reserved_bits@,$sim_reserved_bits,;t t +s,@sim_smp@,$sim_smp,;t t +s,@sim_stdcall@,$sim_stdcall,;t t +s,@sim_xor_endian@,$sim_xor_endian,;t t +s,@WARN_CFLAGS@,$WARN_CFLAGS,;t t +s,@WERROR_CFLAGS@,$WERROR_CFLAGS,;t t +s,@SHELL@,$SHELL,;t t +s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t +s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t +s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t +s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t +s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t +s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t +s,@exec_prefix@,$exec_prefix,;t t +s,@prefix@,$prefix,;t t +s,@program_transform_name@,$program_transform_name,;t t +s,@bindir@,$bindir,;t t +s,@sbindir@,$sbindir,;t t +s,@libexecdir@,$libexecdir,;t t +s,@datadir@,$datadir,;t t +s,@sysconfdir@,$sysconfdir,;t t +s,@sharedstatedir@,$sharedstatedir,;t t +s,@localstatedir@,$localstatedir,;t t +s,@libdir@,$libdir,;t t +s,@includedir@,$includedir,;t t +s,@oldincludedir@,$oldincludedir,;t t +s,@infodir@,$infodir,;t t +s,@mandir@,$mandir,;t t +s,@build_alias@,$build_alias,;t t +s,@host_alias@,$host_alias,;t t +s,@target_alias@,$target_alias,;t t +s,@DEFS@,$DEFS,;t t +s,@ECHO_C@,$ECHO_C,;t t +s,@ECHO_N@,$ECHO_N,;t t +s,@ECHO_T@,$ECHO_T,;t t +s,@LIBS@,$LIBS,;t t +s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t +s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t +s,@INSTALL_DATA@,$INSTALL_DATA,;t t +s,@CC@,$CC,;t t +s,@CFLAGS@,$CFLAGS,;t t +s,@LDFLAGS@,$LDFLAGS,;t t +s,@CPPFLAGS@,$CPPFLAGS,;t t +s,@ac_ct_CC@,$ac_ct_CC,;t t +s,@EXEEXT@,$EXEEXT,;t t +s,@OBJEXT@,$OBJEXT,;t t +s,@SET_MAKE@,$SET_MAKE,;t t +s,@RANLIB@,$RANLIB,;t t +s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t +s,@CPP@,$CPP,;t t +s,@EGREP@,$EGREP,;t t +s,@ALLOCA@,$ALLOCA,;t t +s,@USE_NLS@,$USE_NLS,;t t +s,@MSGFMT@,$MSGFMT,;t t +s,@GMSGFMT@,$GMSGFMT,;t t +s,@XGETTEXT@,$XGETTEXT,;t t +s,@USE_INCLUDED_LIBINTL@,$USE_INCLUDED_LIBINTL,;t t +s,@CATALOGS@,$CATALOGS,;t t +s,@CATOBJEXT@,$CATOBJEXT,;t t +s,@DATADIRNAME@,$DATADIRNAME,;t t +s,@GMOFILES@,$GMOFILES,;t t +s,@INSTOBJEXT@,$INSTOBJEXT,;t t +s,@INTLDEPS@,$INTLDEPS,;t t +s,@INTLLIBS@,$INTLLIBS,;t t +s,@INTLOBJS@,$INTLOBJS,;t t +s,@POFILES@,$POFILES,;t t +s,@POSUB@,$POSUB,;t t +s,@INCLUDE_LOCALE_H@,$INCLUDE_LOCALE_H,;t t +s,@GT_NO@,$GT_NO,;t t +s,@GT_YES@,$GT_YES,;t t +s,@MKINSTALLDIRS@,$MKINSTALLDIRS,;t t +s,@l@,$l,;t t +s,@build@,$build,;t t +s,@build_cpu@,$build_cpu,;t t +s,@build_vendor@,$build_vendor,;t t +s,@build_os@,$build_os,;t t +s,@host@,$host,;t t +s,@host_cpu@,$host_cpu,;t t +s,@host_vendor@,$host_vendor,;t t +s,@host_os@,$host_os,;t t +s,@target@,$target,;t t +s,@target_cpu@,$target_cpu,;t t +s,@target_vendor@,$target_vendor,;t t +s,@target_os@,$target_os,;t t +s,@LIBOBJS@,$LIBOBJS,;t t +s,@CC_FOR_BUILD@,$CC_FOR_BUILD,;t t +s,@HDEFINES@,$HDEFINES,;t t +s,@AR@,$AR,;t t +s,@sim_cflags@,$sim_cflags,;t t +s,@sim_warnings@,$sim_warnings,;t t +s,@sim_line_nr@,$sim_line_nr,;t t +s,@sim_config@,$sim_config,;t t +s,@sim_opcode@,$sim_opcode,;t t +s,@sim_switch@,$sim_switch,;t t +s,@sim_dup@,$sim_dup,;t t +s,@sim_decode_mechanism@,$sim_decode_mechanism,;t t +s,@sim_jump@,$sim_jump,;t t +s,@sim_filter@,$sim_filter,;t t +s,@sim_icache@,$sim_icache,;t t +s,@sim_hw_src@,$sim_hw_src,;t t +s,@sim_hw_obj@,$sim_hw_obj,;t t +s,@sim_pk_src@,$sim_pk_src,;t t +s,@sim_pk_obj@,$sim_pk_obj,;t t +s,@sim_bswap@,$sim_bswap,;t t +s,@sim_igen_smp@,$sim_igen_smp,;t t +s,@sim_hostbitsize@,$sim_hostbitsize,;t t +s,@sim_env@,$sim_env,;t t +s,@sim_timebase@,$sim_timebase,;t t +s,@sim_trace@,$sim_trace,;t t +s,@sim_reserved@,$sim_reserved,;t t +s,@sim_monitor@,$sim_monitor,;t t +s,@sim_model@,$sim_model,;t t +s,@sim_model_issue@,$sim_model_issue,;t t +s,@sim_stdio@,$sim_stdio,;t t +s,@sim_termio@,$sim_termio,;t t +s,@sim_devzero@,$sim_devzero,;t t +s,@sim_callback@,$sim_callback,;t t +s,@sim_targ_vals@,$sim_targ_vals,;t t +s,@sim_fpu_cflags@,$sim_fpu_cflags,;t t +s,@sim_fpu@,$sim_fpu,;t t +s,@LTLIBOBJS@,$LTLIBOBJS,;t t +CEOF + +_ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF + # Split the substitutions into bite-sized pieces for seds with + # small command number limits, like on Digital OSF/1 and HP-UX. + ac_max_sed_lines=48 + ac_sed_frag=1 # Number of current file. + ac_beg=1 # First line for current file. + ac_end=$ac_max_sed_lines # Line after last line for current file. + ac_more_lines=: + ac_sed_cmds= + while $ac_more_lines; do + if test $ac_beg -gt 1; then + sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag + else + sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag + fi + if test ! -s $tmp/subs.frag; then + ac_more_lines=false + else + # The purpose of the label and of the branching condition is to + # speed up the sed processing (if there are no `@' at all, there + # is no need to browse any of the substitutions). + # These are the two extra sed commands mentioned above. + (echo ':t + /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed + if test -z "$ac_sed_cmds"; then + ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" + else + ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" + fi + ac_sed_frag=`expr $ac_sed_frag + 1` + ac_beg=$ac_end + ac_end=`expr $ac_end + $ac_max_sed_lines` + fi + done + if test -z "$ac_sed_cmds"; then + ac_sed_cmds=cat fi +fi # test -n "$CONFIG_FILES" - case "$ac_given_srcdir" in - .) srcdir=. - if test -z "$ac_dots"; then top_srcdir=. - else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; - /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; - *) # Relative path. - srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" - top_srcdir="$ac_dots$ac_given_srcdir" ;; +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case $ac_file in + - | *:- | *:-:* ) # input from stdin + cat >$tmp/stdin + ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + * ) ac_file_in=$ac_file.in ;; esac - case "$ac_given_INSTALL" in - [/$]*) INSTALL="$ac_given_INSTALL" ;; - *) INSTALL="$ac_dots$ac_given_INSTALL" ;; - esac + # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. + ac_dir=`(dirname "$ac_file") 2>/dev/null || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } + + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi - echo creating "$ac_file" - rm -f "$ac_file" - configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." - case "$ac_file" in - *Makefile*) ac_comsub="1i\\ -# $configure_input" ;; - *) ac_comsub= ;; +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac + +# Do not use `cd foo && pwd` to compute absolute paths, because +# the directories may not exist. +case `pwd` in +.) ac_abs_builddir="$ac_dir";; +*) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_builddir=${ac_top_builddir}.;; +*) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_srcdir=$ac_srcdir;; +*) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_srcdir=$ac_top_srcdir;; +*) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; +esac + + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_builddir$INSTALL ;; esac - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` - sed -e "$ac_comsub -s%@configure_input@%$configure_input%g -s%@srcdir@%$srcdir%g -s%@top_srcdir@%$top_srcdir%g -s%@INSTALL@%$INSTALL%g -" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file -fi; done -rm -f conftest.s* + if test x"$ac_file" != x-; then + { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + rm -f "$ac_file" + fi + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + if test x"$ac_file" = x-; then + configure_input= + else + configure_input="$ac_file. " + fi + configure_input=$configure_input"Generated from `echo $ac_file_in | + sed 's,.*/,,'` by configure." + + # First look for the input files in the build tree, otherwise in the + # src tree. + ac_file_inputs=`IFS=: + for f in $ac_file_in; do + case $f in + -) echo $tmp/stdin ;; + [\\/$]*) + # Absolute (can't be DOS-style, as IFS=:) + test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + echo "$f";; + *) # Relative + if test -f "$f"; then + # Build tree + echo "$f" + elif test -f "$srcdir/$f"; then + # Source tree + echo "$srcdir/$f" + else + # /dev/null tree + { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + fi;; + esac + done` || { (exit 1); exit 1; } +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF + sed "$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s,@configure_input@,$configure_input,;t t +s,@srcdir@,$ac_srcdir,;t t +s,@abs_srcdir@,$ac_abs_srcdir,;t t +s,@top_srcdir@,$ac_top_srcdir,;t t +s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t +s,@builddir@,$ac_builddir,;t t +s,@abs_builddir@,$ac_abs_builddir,;t t +s,@top_builddir@,$ac_top_builddir,;t t +s,@abs_top_builddir@,$ac_abs_top_builddir,;t t +s,@INSTALL@,$ac_INSTALL,;t t +" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out + rm -f $tmp/stdin + if test x"$ac_file" != x-; then + mv $tmp/out $ac_file + else + cat $tmp/out + rm -f $tmp/out + fi + +done +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF + +# +# CONFIG_HEADER section. +# # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where # NAME is the cpp macro being defined and VALUE is the value it is being given. # # ac_d sets the value in "#define NAME VALUE" lines. -ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)' -ac_dB='\([ ][ ]*\)[^ ]*%\1#\2' -ac_dC='\3' -ac_dD='%g' -# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE". -ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' -ac_uB='\([ ]\)%\1#\2define\3' +ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' +ac_dB='[ ].*$,\1#\2' +ac_dC=' ' +ac_dD=',;t' +# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". +ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +ac_uB='$,\1#\2define\3' ac_uC=' ' -ac_uD='\4%g' -# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE". -ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' -ac_eB='$%\1#\2define\3' -ac_eC=' ' -ac_eD='%g' - -if test "${CONFIG_HEADERS+set}" != set; then -EOF -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF -fi -for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then +ac_uD=',;t' + +for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` - ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - *) ac_file_in="${ac_file}.in" ;; + case $ac_file in + - | *:- | *:-:* ) # input from stdin + cat >$tmp/stdin + ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + * ) ac_file_in=$ac_file.in ;; esac - echo creating $ac_file - - rm -f conftest.frag conftest.in conftest.out - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` - cat $ac_file_inputs > conftest.in - -EOF - -# Transform confdefs.h into a sed script conftest.vals that substitutes -# the proper values into config.h.in to produce config.h. And first: -# Protect against being on the right side of a sed subst in config.status. -# Protect against being in an unquoted here document in config.status. -rm -f conftest.vals -cat > conftest.hdr <<\EOF -s/[\\&%]/\\&/g -s%[\\$`]%\\&%g -s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp -s%ac_d%ac_u%gp -s%ac_u%ac_e%gp -EOF -sed -n -f conftest.hdr confdefs.h > conftest.vals -rm -f conftest.hdr + test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + + # First look for the input files in the build tree, otherwise in the + # src tree. + ac_file_inputs=`IFS=: + for f in $ac_file_in; do + case $f in + -) echo $tmp/stdin ;; + [\\/$]*) + # Absolute (can't be DOS-style, as IFS=:) + test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + # Do quote $f, to prevent DOS paths from being IFS'd. + echo "$f";; + *) # Relative + if test -f "$f"; then + # Build tree + echo "$f" + elif test -f "$srcdir/$f"; then + # Source tree + echo "$srcdir/$f" + else + # /dev/null tree + { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + fi;; + esac + done` || { (exit 1); exit 1; } + # Remove the trailing spaces. + sed 's/[ ]*$//' $ac_file_inputs >$tmp/in + +_ACEOF + +# Transform confdefs.h into two sed scripts, `conftest.defines' and +# `conftest.undefs', that substitutes the proper values into +# config.h.in to produce config.h. The first handles `#define' +# templates, and the second `#undef' templates. +# And first: Protect against being on the right side of a sed subst in +# config.status. Protect against being in an unquoted here document +# in config.status. +rm -f conftest.defines conftest.undefs +# Using a here document instead of a string reduces the quoting nightmare. +# Putting comments in sed scripts is not portable. +# +# `end' is used to avoid that the second main sed command (meant for +# 0-ary CPP macros) applies to n-ary macro definitions. +# See the Autoconf documentation for `clear'. +cat >confdef2sed.sed <<\_ACEOF +s/[\\&,]/\\&/g +s,[\\$`],\\&,g +t clear +: clear +s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp +t end +s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp +: end +_ACEOF +# If some macros were called several times there might be several times +# the same #defines, which is useless. Nevertheless, we may not want to +# sort them, since we want the *last* AC-DEFINE to be honored. +uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines +sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs +rm -f confdef2sed.sed # This sed command replaces #undef with comments. This is necessary, for # example, in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. -cat >> conftest.vals <<\EOF -s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */% -EOF - -# Break up conftest.vals because some shells have a limit on -# the size of here documents, and old seds have small limits too. +cat >>conftest.undefs <<\_ACEOF +s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, +_ACEOF + +# Break up conftest.defines because some shells have a limit on the size +# of here documents, and old seds have small limits too (100 cmds). +echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS +echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS +echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS +echo ' :' >>$CONFIG_STATUS +rm -f conftest.tail +while grep . conftest.defines >/dev/null +do + # Write a limited-size here document to $tmp/defines.sed. + echo ' cat >$tmp/defines.sed <>$CONFIG_STATUS + # Speed up: don't consider the non `#define' lines. + echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS + # Work around the forget-to-reset-the-flag bug. + echo 't clr' >>$CONFIG_STATUS + echo ': clr' >>$CONFIG_STATUS + sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS + echo 'CEOF + sed -f $tmp/defines.sed $tmp/in >$tmp/out + rm -f $tmp/in + mv $tmp/out $tmp/in +' >>$CONFIG_STATUS + sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail + rm -f conftest.defines + mv conftest.tail conftest.defines +done +rm -f conftest.defines +echo ' fi # grep' >>$CONFIG_STATUS +echo >>$CONFIG_STATUS +# Break up conftest.undefs because some shells have a limit on the size +# of here documents, and old seds have small limits too (100 cmds). +echo ' # Handle all the #undef templates' >>$CONFIG_STATUS rm -f conftest.tail -while : +while grep . conftest.undefs >/dev/null do - ac_lines=`grep -c . conftest.vals` - # grep -c gives empty output for an empty file on some AIX systems. - if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi - # Write a limited-size here document to conftest.frag. - echo ' cat > conftest.frag <> $CONFIG_STATUS - sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS + # Write a limited-size here document to $tmp/undefs.sed. + echo ' cat >$tmp/undefs.sed <>$CONFIG_STATUS + # Speed up: don't consider the non `#undef' + echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS + # Work around the forget-to-reset-the-flag bug. + echo 't clr' >>$CONFIG_STATUS + echo ': clr' >>$CONFIG_STATUS + sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS echo 'CEOF - sed -f conftest.frag conftest.in > conftest.out - rm -f conftest.in - mv conftest.out conftest.in -' >> $CONFIG_STATUS - sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail - rm -f conftest.vals - mv conftest.tail conftest.vals + sed -f $tmp/undefs.sed $tmp/in >$tmp/out + rm -f $tmp/in + mv $tmp/out $tmp/in +' >>$CONFIG_STATUS + sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail + rm -f conftest.undefs + mv conftest.tail conftest.undefs done -rm -f conftest.vals - -cat >> $CONFIG_STATUS <<\EOF - rm -f conftest.frag conftest.h - echo "/* $ac_file. Generated automatically by configure. */" > conftest.h - cat conftest.in >> conftest.h - rm -f conftest.in - if cmp -s $ac_file conftest.h 2>/dev/null; then - echo "$ac_file is unchanged" - rm -f conftest.h +rm -f conftest.undefs + +cat >>$CONFIG_STATUS <<\_ACEOF + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + if test x"$ac_file" = x-; then + echo "/* Generated by configure. */" >$tmp/config.h + else + echo "/* $ac_file. Generated by configure. */" >$tmp/config.h + fi + cat $tmp/in >>$tmp/config.h + rm -f $tmp/in + if test x"$ac_file" != x-; then + if diff $ac_file $tmp/config.h >/dev/null 2>&1; then + { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 +echo "$as_me: $ac_file is unchanged" >&6;} + else + ac_dir=`(dirname "$ac_file") 2>/dev/null || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p "$ac_dir" else - # Remove last slash and all that follows it. Not all systems have dirname. - ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` - if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then - # The file is in a subdirectory. - test ! -d "$ac_dir" && mkdir "$ac_dir" + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } + + rm -f $ac_file + mv $tmp/config.h $ac_file fi - rm -f $ac_file - mv conftest.h $ac_file + else + cat $tmp/config.h + rm -f $tmp/config.h fi -fi; done +done +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF + +# +# CONFIG_COMMANDS section. +# +for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue + ac_dest=`echo "$ac_file" | sed 's,:.*,,'` + ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_dir=`(dirname "$ac_dest") 2>/dev/null || +$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_dest" : 'X\(//\)[^/]' \| \ + X"$ac_dest" : 'X\(//\)$' \| \ + X"$ac_dest" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$ac_dest" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } + + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac + +# Do not use `cd foo && pwd` to compute absolute paths, because +# the directories may not exist. +case `pwd` in +.) ac_abs_builddir="$ac_dir";; +*) + case "$ac_dir" in + .) ac_abs_builddir=`pwd`;; + [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; + *) ac_abs_builddir=`pwd`/"$ac_dir";; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_builddir=${ac_top_builddir}.;; +*) + case ${ac_top_builddir}. in + .) ac_abs_top_builddir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; + *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_srcdir=$ac_srcdir;; +*) + case $ac_srcdir in + .) ac_abs_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; + *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; + esac;; +esac +case $ac_abs_builddir in +.) ac_abs_top_srcdir=$ac_top_srcdir;; +*) + case $ac_top_srcdir in + .) ac_abs_top_srcdir=$ac_abs_builddir;; + [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; + *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; + esac;; +esac + -EOF -cat >> $CONFIG_STATUS <&5 +echo "$as_me: executing $ac_dest commands" >&6;} + case $ac_dest in + default ) case x$CONFIG_HEADERS in xconfig.h:config.in) echo > stamp-h ;; esac ;; + esac +done +_ACEOF -EOF -cat >> $CONFIG_STATUS <<\EOF -case x$CONFIG_HEADERS in xconfig.h:config.in) echo > stamp-h ;; esac -exit 0 -EOF +cat >>$CONFIG_STATUS <<\_ACEOF + +{ (exit 0); exit 0; } +_ACEOF chmod +x $CONFIG_STATUS -rm -fr confdefs* $ac_clean_files -test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 +ac_clean_files=$ac_clean_files_save + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || { (exit 1); exit 1; } +fi diff --git a/sim/ppc/configure.ac b/sim/ppc/configure.ac new file mode 100644 index 0000000..99dd5bc --- /dev/null +++ b/sim/ppc/configure.ac @@ -0,0 +1,790 @@ +dnl Process this file with autoconf to produce a configure script. +sinclude(../common/aclocal.m4) +AC_PREREQ(2.59)dnl +AC_INIT(Makefile.in) + +AC_PROG_INSTALL +AC_PROG_CC + +# Put a plausible default for CC_FOR_BUILD in Makefile. +if test "x$cross_compiling" = "xno"; then + CC_FOR_BUILD='$(CC)' +else + CC_FOR_BUILD=gcc +fi + +dnl We don't use gettext, but bfd does. So we do the appropriate checks +dnl to see if there are intl libraries we should link against. +ALL_LINGUAS= +CY_GNU_GETTEXT + + +AC_ARG_ENABLE(sim-alignment, +[ --enable-sim-alignment=align Specify strict or nonstrict alignment.], +[case "${enableval}" in + yes | strict | STRICT) sim_alignment="-DWITH_ALIGNMENT=STRICT_ALIGNMENT";; + no | nonstrict | NONSTRICT) sim_alignment="-DWITH_ALIGNMENT=NONSTRICT_ALIGNMENT";; + 0 | default | DEFAULT) sim_alignment="-DWITH_ALIGNMENT=0";; + *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-alignment"); sim_alignment="";; +esac +if test x"$silent" != x"yes" && test x"$sim_alignment" != x""; then + echo "Setting alignment flags = $sim_alignment" 6>&1 +fi],[sim_alignment=""])dnl + + +AC_ARG_ENABLE(sim-assert, +[ --enable-sim-assert Specify whether to perform random assertions.], +[case "${enableval}" in + yes) sim_assert="-DWITH_ASSERT=1";; + no) sim_assert="-DWITH_ASSERT=0";; + *) AC_MSG_ERROR("--enable-sim-assert does not take a value"); sim_assert="";; +esac +if test x"$silent" != x"yes" && test x"$sim_assert" != x""; then + echo "Setting assert flags = $sim_assert" 6>&1 +fi],[sim_assert=""])dnl + + +AC_ARG_ENABLE(sim-bitsize, +[ --enable-sim-bitsize=n Specify target bitsize (32 or 64).], +[case "${enableval}" in + 32|64) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=$enableval";; + *) AC_MSG_ERROR("--enable-sim-bitsize was given $enableval. Expected 32 or 64"); sim_bitsize="";; +esac +if test x"$silent" != x"yes" && test x"$sim_bitsize" != x""; then + echo "Setting bitsize flags = $sim_bitsize" 6>&1 +fi],[sim_bitsize=""])dnl + + +AC_ARG_ENABLE(sim-bswap, +[ --enable-sim-bswap Use the BSWAP instruction on Intel 486s and Pentiums.], +[case "${enableval}" in + yes) sim_bswap="-DWITH_BSWAP=1";; + no) sim_bswap="-DWITH_BSWAP=0";; + *) AC_MSG_ERROR("--enable-sim-bswap does not take a value"); sim_bswap="";; +esac +if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then + echo "Setting bswap flags = $sim_bswap" 6>&1 +fi],[sim_bswap=""])dnl + + +AC_ARG_ENABLE(sim-cflags, +[ --enable-sim-cflags=opts Extra CFLAGS for use in building simulator], +[case "${enableval}" in + yes) sim_cflags="-O2 -fomit-frame-pointer";; + no) sim_cflags="";; + *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; +esac +if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then + echo "Setting sim cflags = $sim_cflags" 6>&1 +fi],[sim_cflags=""])dnl + + +AC_ARG_ENABLE(sim-config, +[ --enable-sim-config=file Override default config file], +[case "${enableval}" in + yes|no) AC_MSG_ERROR("No value supplied for --enable-sim-config=file");; + *) if test -f "${srcdir}/${enableval}"; then + sim_config="${enableval}"; + elif test -f "${srcdir}/${enableval}-config.h"; then + sim_config="${enableval}-config.h" + else + AC_MSG_ERROR("Config file $enableval was not found"); + sim_config=std-config.h + fi;; +esac +if test x"$silent" != x"yes" && test x"$sim_config" != x""; then + echo "Setting config flags = $sim_config" 6>&1 +fi],[sim_config="std-config.h" +if test x"$silent" != x"yes"; then + echo "Setting config flags = $sim_config" 6>&1 +fi])dnl + + +AC_ARG_ENABLE(sim-decode-mechanism, +[ --enable-sim-decode-mechanism=which Specify the instruction decode mechanism.], +[case "${enableval}" in + yes|no) AC_MSG_ERROR("No value supplied for --enable-sim-decode-mechanism=file");; + array|switch|padded-switch|goto-switch) sim_decode_mechanism="-T ${enableval}";; + *) AC_MSG_ERROR("File $enableval is not an opcode rules file"); + sim_decode_mechanism="switch";; +esac +if test x"$silent" != x"yes" && test x"$sim_decode_mechanism" != x""; then + echo "Setting decode mechanism flags = $sim_decode_mechanism" 6>&1 +fi],[sim_decode_mechanism="" +if test x"$silent" != x"yes"; then + echo "Setting decode mechanism flags = $sim_decode_mechanism" +fi])dnl + + +AC_ARG_ENABLE(sim-default-model, +[ --enable-sim-default-model=which Specify default PowerPC to model.], +[case "${enableval}" in + yes|no) AC_MSG_ERROR("No value supplied for --enable-sim-default-model=model");; + *) sim_default_model="-DWITH_DEFAULT_MODEL=${enableval}";; +esac +if test x"$silent" != x"yes" && test x"$sim_default_model" != x""; then + echo "Setting default-model flags = $sim_default_model" 6>&1 +fi],[sim_default_model=""])dnl + + +AC_ARG_ENABLE(sim-duplicate, +[ --enable-sim-duplicate Expand (duplicate) semantic functions.], +[case "${enableval}" in + yes) sim_dup="-E";; + no) sim_dup="";; + *) AC_MSG_ERROR("--enable-sim-duplicate does not take a value"); sim_dup="";; +esac +if test x"$silent" != x"yes" && test x"$sim_dup" != x""; then + echo "Setting duplicate flags = $sim_dup" 6>&1 +fi],[sim_dup="-E" +if test x"$silent" != x"yes"; then + echo "Setting duplicate flags = $sim_dup" 6>&1 +fi])dnl + + +AC_ARG_ENABLE(sim-endian, +[ --enable-sim-endian=endian Specify target byte endian orientation.], +[case "${enableval}" in + yes) case "$target" in + *powerpc-*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; + *powerpcle-*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; + *) echo "Unknown target $target" 1>&6; sim_endian="-DWITH_TARGET_BYTE_ORDER=0";; + esac;; + no) sim_endian="-DWITH_TARGET_BYTE_ORDER=0";; + b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; + l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; + *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-endian"); sim_endian="";; +esac +if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then + echo "Setting endian flags = $sim_endian" 6>&1 +fi],[sim_endian=""])dnl + + +AC_ARG_ENABLE(sim-env, +[ --enable-sim-env=env Specify target environment (operating, virtual, user).], +[case "${enableval}" in + operating | os | oea) sim_env="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";; + virtual | vea) sim_env="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";; + user | uea) sim_env="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";; + no) sim_env="-DWITH_ENVIRONMENT=0";; + *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-env"); sim_env="";; +esac +if test x"$silent" != x"yes" && test x"$sim_env" != x""; then + echo "Setting env flags = $sim_env" 6>&1 +fi],[sim_env=""])dnl + + +AC_ARG_ENABLE(sim-filter, +[ --enable-sim-filter=rule Specify filter rules.], +[case "${enableval}" in + yes) AC_MSG_ERROR("--enable-sim-filter must be specified with a rule to filter or no"); sim_filter="";; + no) sim_filter="";; + *) sim_filter="-F $enableval";; +esac +if test x"$silent" != x"yes" && test x"$sim_filter" != x""; then + echo "Setting filter flags = $sim_filter" 6>&1 +fi],[sim_filter="-F 32,f,o" +if test x"$silent" != x"yes"; then + echo "Setting filter flags = $sim_filter" 6>&1 +fi])dnl + + +AC_ARG_ENABLE(sim-float, +[ --enable-sim-float Specify whether the target has hard, soft, altivec or e500 floating point.], +[case "${enableval}" in + yes | hard) sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT";; + no | soft) sim_float="-DWITH_FLOATING_POINT=SOFT_FLOATING_POINT";; + altivec) sim_float="-DWITH_ALTIVEC" ; sim_filter="${sim_filter},av" ;; + *spe*|*simd*) sim_float="-DWITH_E500" ; sim_filter="${sim_filter},e500" ;; + *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-float"); sim_float="";; +esac +if test x"$silent" != x"yes" && test x"$sim_float" != x""; then + echo "Setting float flags = $sim_float" 6>&1 +fi],[ +case "${target}" in + *altivec*) sim_float="-DWITH_ALTIVEC" ; sim_filter="${sim_filter},av" ;; + *spe*|*simd*) sim_float="-DWITH_E500" ; sim_filter="${sim_filter},e500" ;; + *) sim_float="" +esac +])dnl + + +AC_ARG_ENABLE(sim-hardware, +[ --enable-sim-hardware=list Specify the hardware to be included in the build.], +[hardware="cpu,memory,nvram,iobus,htab,disk,trace,register,vm,init,core,pal,com,eeprom,opic,glue,phb,ide" +case "${enableval}" in + yes) ;; + no) AC_MSG_ERROR("List of hardware must be specified for --enable-sim-hardware"); hardware="";; + ,*) hardware="${hardware}${enableval}";; + *,) hardware="${enableval}${hardware}";; + *) hardware="${enableval}"'';; +esac +sim_hw_src=`echo $hardware | sed -e 's/,/.c hw_/g' -e 's/^/hw_/' -e s'/$/.c/'` +sim_hw_obj=`echo $sim_hw_src | sed -e 's/\.c/.o/g'` +if test x"$silent" != x"yes" && test x"$hardware" != x""; then + echo "Setting hardware to $sim_hw_src, $sim_hw_obj" +fi],[hardware="cpu,memory,nvram,iobus,htab,disk,trace,register,vm,init,core,pal,com,eeprom,opic,glue,phb,ide" +sim_hw_src=`echo $hardware | sed -e 's/,/.c hw_/g' -e 's/^/hw_/' -e s'/$/.c/'` +sim_hw_obj=`echo $sim_hw_src | sed -e 's/\.c/.o/g'` +if test x"$silent" != x"yes"; then + echo "Setting hardware to $sim_hw_src, $sim_hw_obj" +fi])dnl + + +AC_ARG_ENABLE(sim-hostbitsize, +[ --enable-sim-hostbitsize=32|64 Specify host bitsize (32 or 64).], +[case "${enableval}" in + 32|64) sim_hostbitsize="-DWITH_HOST_WORD_BITSIZE=$enableval";; + *) AC_MSG_ERROR("--enable-sim-hostbitsize was given $enableval. Expected 32 or 64"); sim_hostbitsize="";; +esac +if test x"$silent" != x"yes" && test x"$sim_hostbitsize" != x""; then + echo "Setting hostbitsize flags = $sim_hostbitsize" 6>&1 +fi],[sim_hostbitsize=""])dnl + + +AC_ARG_ENABLE(sim-hostendian, +[ --enable-sim-hostendian=end Specify host byte endian orientation.], +[case "${enableval}" in + no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";; + b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";; + l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";; + *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-hostendian"); sim_hostendian="";; +esac +if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then + echo "Setting hostendian flags = $sim_hostendian" 6>&1 +fi],[ +if test "x$cross_compiling" = "xno"; then + AC_C_BIGENDIAN + if test $ac_cv_c_bigendian = yes; then + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN" + else + sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN" + fi +else + sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" +fi])dnl + + +AC_ARG_ENABLE(sim-icache, +[ --enable-sim-icache=size Specify instruction-decode cache size and type.], +[icache="-R" + case "${enableval}" in + yes) icache="1024"; sim_icache="-I $icache";; + no) sim_icache="-R";; + *) icache=1024 + sim_icache="-" + for x in `echo "${enableval}" | sed -e "s/,/ /g"`; do + case "$x" in + define) sim_icache="${sim_icache}R";; + semantic) sim_icache="${sim_icache}C";; + insn) sim_icache="${sim_icache}S";; + 0*|1*|2*|3*|4*|5*|6*|7*|8*|9*) icache=$x;; + *) AC_MSG_ERROR("Unknown value $x for --enable-sim-icache"); sim_icache="";; + esac + done + sim_icache="${sim_icache}I $icache";; +esac +if test x"$silent" != x"yes" && test x"$icache" != x""; then + echo "Setting instruction cache size to $icache ($sim_icache)" +fi],[sim_icache="-CSRI 1024" +if test x"$silent" != x"yes"; then + echo "Setting instruction cache size to 1024 ($sim_icache)" +fi])dnl + + +AC_ARG_ENABLE(sim-inline, +[ --enable-sim-inline=inlines Specify which functions should be inlined.], +[sim_inline="" +case "$enableval" in + no) sim_inline="-DDEFAULT_INLINE=0";; + 0) sim_inline="-DDEFAULT_INLINE=0";; + yes | 2) sim_inline="-DDEFAULT_INLINE=ALL_INLINE";; + 1) sim_inline="-DDEFAULT_INLINE=PSIM_INLINE_LOCALS";; + *) for x in `echo "$enableval" | sed -e "s/,/ /g"`; do + new_flag="" + case "$x" in + *_INLINE=*) new_flag="-D$x";; + *=*) new_flag=`echo "$x" | sed -e "s/=/_INLINE=/" -e "s/^/-D/"`;; + *_INLINE) new_flag="-D$x=ALL_INLINE";; + *) new_flag="-D$x""_INLINE=ALL_INLINE";; + esac + if test x"$sim_inline" = x""; then + sim_inline="$new_flag" + else + sim_inline="$sim_inline $new_flag" + fi + done;; +esac +if test x"$silent" != x"yes" && test x"$sim_inline" != x""; then + echo "Setting inline flags = $sim_inline" 6>&1 +fi],[if test x"$GCC" != ""; then + sim_inline="-DDEFAULT_INLINE=PSIM_INLINE_LOCALS" + if test x"$silent" != x"yes"; then + echo "Setting inline flags = $sim_inline" 6>&1 + fi +else + sim_inline="" +fi])dnl + + +AC_ARG_ENABLE(sim-jump, +[ --enable-sim-jump Jump between semantic code (instead of call/return).], +[case "${enableval}" in + yes) sim_jump="-J";; + no) sim_jump="";; + *) AC_MSG_ERROR("--enable-sim-jump does not take a value"); sim_jump="";; +esac +if test x"$silent" != x"yes" && test x"$sim_jump" != x""; then + echo "Setting jump flag = $sim_jump" 6>&1 +fi],[sim_jump="" +if test x"$silent" != x"yes"; then + echo "Setting jump flag = $sim_jump" 6>&1 +fi])dnl + + +AC_ARG_ENABLE(sim-line-nr, +[ --enable-sim-line-nr=opts Generate extra CPP code that references source rather than generated code], +[case "${enableval}" in + yes) sim_line_nr="";; + no) sim_line_nr="-L";; + *) AC_MSG_ERROR("--enable-sim-line-nr does not take a value"); sim_line_nr="";; +esac +if test x"$silent" != x"yes" && test x"$sim_line_nr" != x""; then + echo "Setting warning flags = $sim_line_nr" 6>&1 +fi],[sim_line_nr=""])dnl + + +AC_ARG_ENABLE(sim-model, +[ --enable-sim-model=which Specify PowerPC to model.], +[case "${enableval}" in + yes|no) AC_MSG_ERROR("No value supplied for --enable-sim-model=model");; + *) sim_model="-DWITH_MODEL=${enableval}";; +esac +if test x"$silent" != x"yes" && test x"$sim_model" != x""; then + echo "Setting model flags = $sim_model" 6>&1 +fi],[sim_model=""])dnl + + +AC_ARG_ENABLE(sim-model-issue, +[ --enable-sim-model-issue Specify whether to simulate model specific actions], +[case "${enableval}" in + yes) sim_model_issue="-DWITH_MODEL_ISSUE=MODEL_ISSUE_PROCESS";; + no) sim_model_issue="-DWITH_MODEL_ISSUE=MODEL_ISSUE_IGNORE";; + *) AC_MSG_ERROR("--enable-sim-model-issue does not take a value"); sim_model_issue="";; +esac +if test x"$silent" != x"yes"; then + echo "Setting model-issue flags = $sim_model_issue" 6>&1 +fi],[sim_model_issue=""])dnl + + +AC_ARG_ENABLE(sim-monitor, +[ --enable-sim-monitor=mon Specify whether to enable monitoring events.], +[case "${enableval}" in + yes) sim_monitor="-DWITH_MON='MONITOR_INSTRUCTION_ISSUE | MONITOR_LOAD_STORE_UNIT'";; + no) sim_monitor="-DWITH_MON=0";; + instruction) sim_monitor="-DWITH_MON=MONITOR_INSTRUCTION_ISSUE";; + memory) sim_monitor="-DWITH_MON=MONITOR_LOAD_STORE_UNIT";; + *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-mon"); sim_env="";; +esac +if test x"$silent" != x"yes" && test x"$sim_monitor" != x""; then + echo "Setting monitor flags = $sim_monitor" 6>&1 +fi],[sim_monitor=""])dnl + + +AC_ARG_ENABLE(sim-opcode, +[ --enable-sim-opcode=which Override default opcode lookup.], +[case "${enableval}" in + yes|no) AC_MSG_ERROR("No value supplied for --enable-sim-opcode=file");; + *) if test -f "${srcdir}/${enableval}"; then + sim_opcode="${enableval}" + elif test -f "${srcdir}/dc-${enableval}"; then + sim_opcode="dc-${enableval}" + else + AC_MSG_ERROR("File $enableval is not an opcode rules file"); + sim_opcode="dc-complex" + fi;; +esac +if test x"$silent" != x"yes" && test x"$sim_opcode" != x""; then + echo "Setting opcode flags = $sim_opcode" 6>&1 +fi],[sim_opcode="dc-complex" +if test x"$silent" != x"yes"; then + echo "Setting opcode flags = $sim_opcode" +fi])dnl + + +AC_ARG_ENABLE(sim-packages, +[ --enable-sim-packages=list Specify the packages to be included in the build.], +[packages=disklabel +case "${enableval}" in + yes) ;; + no) AC_MSG_ERROR("List of packages must be specified for --enable-sim-packages"); packages="";; + ,*) packages="${packages}${enableval}";; + *,) packages="${enableval}${packages}";; + *) packages="${enableval}"'';; +esac +sim_pk_src=`echo $packages | sed -e 's/,/.c pk_/g' -e 's/^/pk_/' -e 's/$/.c/'` +sim_pk_obj=`echo $sim_pk_src | sed -e 's/\.c/.o/g'` +if test x"$silent" != x"yes" && test x"$packages" != x""; then + echo "Setting packages to $sim_pk_src, $sim_pk_obj" +fi],[packages=disklabel +sim_pk_src=`echo $packages | sed -e 's/,/.c pk_/g' -e 's/^/pk_/' -e 's/$/.c/'` +sim_pk_obj=`echo $sim_pk_src | sed -e 's/\.c/.o/g'` +if test x"$silent" != x"yes"; then + echo "Setting packages to $sim_pk_src, $sim_pk_obj" +fi])dnl + + +AC_ARG_ENABLE(sim-regparm, +[ --enable-sim-regparm=nr-parm Pass parameters in registers instead of on the stack - x86/GCC specific.], +[case "${enableval}" in + 0*|1*|2*|3*|4*|5*|6*|7*|8*|9*) sim_regparm="-DWITH_REGPARM=${enableval}";; + no) sim_regparm="" ;; + yes) sim_regparm="-DWITH_REGPARM=3";; + *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-regparm"); sim_regparm="";; +esac +if test x"$silent" != x"yes" && test x"$sim_regparm" != x""; then + echo "Setting regparm flags = $sim_regparm" 6>&1 +fi],[sim_regparm=""])dnl + + +AC_ARG_ENABLE(sim-reserved-bits, +[ --enable-sim-reserved-bits Specify whether to check reserved bits in instruction.], +[case "${enableval}" in + yes) sim_reserved="-DWITH_RESERVED_BITS=1";; + no) sim_reserved="-DWITH_RESERVED_BITS=0";; + *) AC_MSG_ERROR("--enable-sim-reserved-bits does not take a value"); sim_reserved="";; +esac +if test x"$silent" != x"yes" && test x"$sim_reserved" != x""; then + echo "Setting reserved flags = $sim_reserved" 6>&1 +fi],[sim_reserved=""])dnl + + +AC_ARG_ENABLE(sim-smp, +[ --enable-sim-smp=n Specify number of processors to configure for.], +[case "${enableval}" in + yes) sim_smp="-DWITH_SMP=5" ; sim_igen_smp="-N 5";; + no) sim_smp="-DWITH_SMP=0" ; sim_igen_smp="-N 0";; + *) sim_smp="-DWITH_SMP=$enableval" ; sim_igen_smp="-N $enableval";; +esac +if test x"$silent" != x"yes" && test x"$sim_smp" != x""; then + echo "Setting smp flags = $sim_smp" 6>&1 +fi],[sim_smp="-DWITH_SMP=5" ; sim_igen_smp="-N 5" +if test x"$silent" != x"yes"; then + echo "Setting smp flags = $sim_smp" 6>&1 +fi])dnl + + +AC_ARG_ENABLE(sim-stdcall, +[ --enable-sim-stdcall=type Use an alternative function call/return mechanism - x86/GCC specific.], +[case "${enableval}" in + no) sim_stdcall="" ;; + std*) sim_stdcall="-DWITH_STDCALL=1";; + yes) sim_stdcall="-DWITH_STDCALL=1";; + *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-stdcall"); sim_stdcall="";; +esac +if test x"$silent" != x"yes" && test x"$sim_stdcall" != x""; then + echo "Setting function call flags = $sim_stdcall" 6>&1 +fi],[sim_stdcall=""])dnl + + +AC_ARG_ENABLE(sim-stdio, +[ --enable-sim-stdio Specify whether to use stdio for console input/output.], +[case "${enableval}" in + yes) sim_stdio="-DWITH_STDIO=DO_USE_STDIO";; + no) sim_stdio="-DWITH_STDIO=DONT_USE_STDIO";; + *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-stdio"); sim_stdio="";; +esac +if test x"$silent" != x"yes" && test x"$sim_stdio" != x""; then + echo "Setting stdio flags = $sim_stdio" 6>&1 +fi],[sim_stdio=""])dnl + + +AC_ARG_ENABLE(sim-switch, +[ --enable-sim-switch Use a switch instead of a table for instruction call.], +[case "${enableval}" in + yes) sim_switch="-s";; + no) sim_switch="";; + *) AC_MSG_ERROR("--enable-sim-switch does not take a value"); sim_switch="";; +esac +if test x"$silent" != x"yes" && test x"$sim_switch" != x""; then + echo "Setting switch flags = $sim_switch" 6>&1 +fi],[sim_switch=""; +if test x"$silent" != x"yes"; then + echo "Setting switch flags = $sim_switch" 6>&1 +fi])dnl + + +AC_ARG_ENABLE(sim-timebase, +[ --enable-sim-timebase Specify whether the PPC timebase is supported.], +[case "${enableval}" in + yes) sim_timebase="-DWITH_TIME_BASE=1";; + no) sim_timebase="-DWITH_TIME_BASE=0";; + *) AC_MSG_ERROR("--enable-sim-timebase does not take a value"); sim_timebase="";; +esac +if test x"$silent" != x"yes" && test x"$sim_timebase" != x""; then + echo "Setting timebase flags = $sim_timebase" 6>&1 +fi],[sim_timebase=""])dnl + + +AC_ARG_ENABLE(sim-trace, +[ --enable-sim-trace Specify whether tracing is supported.], +[case "${enableval}" in + yes) sim_trace="-DWITH_TRACE=1";; + no) sim_trace="-DWITH_TRACE=0";; + *) AC_MSG_ERROR("--enable-sim-trace does not take a value"); sim_trace="";; +esac +if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then + echo "Setting trace flags = $sim_trace" 6>&1 +fi],[sim_trace=""])dnl + + +AC_ARG_ENABLE(sim-warnings, +[ --enable-sim-warnings=opts Extra CFLAGS for turning on compiler warnings except for idecode.o, semantics.o and psim.o], +[case "${enableval}" in + yes) sim_warnings="-Werror -Wall -Wpointer-arith -Wmissing-prototypes -Wmissing-declarations ";; + no) sim_warnings="-w";; + *) sim_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;; +esac +if test x"$silent" != x"yes" && test x"$sim_warnings" != x""; then + echo "Setting warning flags = $sim_warnings" 6>&1 +fi],[sim_warnings=""])dnl + + +AC_ARG_ENABLE(sim-xor-endian, +[ --enable-sim-xor-endian=n Specify number bytes involved in PowerPC XOR bi-endian mode (default 8).], +[case "${enableval}" in + yes) sim_xor_endian="-DWITH_XOR_ENDIAN=8";; + no) sim_xor_endian="-DWITH_XOR_ENDIAN=0";; + *) sim_xor_endian="-DWITH_XOR_ENDIAN=$enableval";; +esac +if test x"$silent" != x"yes" && test x"$sim_xor_endian" != x""; then + echo "Setting xor-endian flag = $sim_xor_endian" 6>&1 +fi],[sim_xor_endian=""])dnl + + +AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/../..) +AC_CANONICAL_SYSTEM +AC_ARG_PROGRAM + +. ${srcdir}/../../bfd/configure.host + +AC_CONFIG_HEADER(config.h:config.in) + +AC_STRUCT_ST_BLKSIZE +AC_STRUCT_ST_BLOCKS +AC_STRUCT_ST_RDEV +AC_STRUCT_TIMEZONE + +AC_TYPE_GETGROUPS +AC_TYPE_MODE_T +AC_TYPE_OFF_T +AC_TYPE_PID_T +AC_TYPE_SIGNAL +AC_TYPE_SIZE_T +AC_TYPE_UID_T + +AC_CHECK_FUNCS(access cfgetispeed cfgetospeed cfsetispeed cfsetospeed chdir chmod chown dup dup2 fchmod fchown fcntl fstat fstatfs getdirentries getegid geteuid getgid getpid getppid getrusage gettimeofday getuid ioctl kill link lseek lstat mkdir pipe readlink rmdir setreuid setregid stat sigprocmask stat symlink tcgetattr tcsetattr tcsendbreak tcdrain tcflush tcflow tcgetpgrp tcsetpgrp time umask unlink) + +AC_CHECK_HEADERS(fcntl.h stdlib.h string.h strings.h sys/ioctl.h sys/mount.h sys/param.h sys/resource.h sys/stat.h sys/termio.h sys/termios.h sys/time.h sys/times.h sys/types.h time.h unistd.h sys/vfs.h sys/statfs.h) +AC_HEADER_DIRENT + +dnl Figure out what type of termio/termios support there is +sim_termio="" +AC_MSG_CHECKING(for struct termios) +AC_CACHE_VAL(ac_cv_termios_struct, +[AC_TRY_COMPILE([#include +#include ], +[static struct termios x; + x.c_iflag = 0; + x.c_oflag = 0; + x.c_cflag = 0; + x.c_lflag = 0; + x.c_cc[NCCS] = 0;], +ac_cv_termios_struct=yes, ac_cv_termios_struct=no)]) +AC_MSG_RESULT($ac_cv_termios_struct) +if test $ac_cv_termios_struct = yes; then + sim_termio="$sim_termio -DHAVE_TERMIOS_STRUCTURE" +fi + +if test "$ac_cv_termios_struct" = "yes"; then + AC_MSG_CHECKING(for c_line field in struct termios) + AC_CACHE_VAL(ac_cv_termios_cline, + [AC_TRY_COMPILE([#include +#include ], +[static struct termios x; x.c_line = 0;], + ac_cv_termios_cline=yes, ac_cv_termios_cline=no)]) + + AC_MSG_RESULT($ac_cv_termios_cline) + if test $ac_cv_termios_cline = yes; then + sim_termio="$sim_termio -DHAVE_TERMIOS_CLINE" + fi +else + ac_cv_termios_cline=no +fi + +if test "$ac_cv_termios_struct" != "yes"; then + AC_MSG_CHECKING(for struct termio) + AC_CACHE_VAL(ac_cv_termio_struct, + [AC_TRY_COMPILE([#include +#include ], +[static struct termio x; + x.c_iflag = 0; + x.c_oflag = 0; + x.c_cflag = 0; + x.c_lflag = 0; + x.c_cc[NCC] = 0;], +ac_cv_termio_struct=yes, ac_cv_termio_struct=no)]) + AC_MSG_RESULT($ac_cv_termio_struct) + if test $ac_cv_termio_struct = yes; then + sim_termio="$sim_termio -DHAVE_TERMIO_STRUCTURE" + fi +else + ac_cv_termio_struct=no +fi + +if test "$ac_cv_termio_struct" = "yes"; then + AC_MSG_CHECKING(for c_line field in struct termio) + AC_CACHE_VAL(ac_cv_termio_cline, + [AC_TRY_COMPILE([#include +#include ], +[static struct termio x; x.c_line = 0;], + ac_cv_termio_cline=yes, ac_cv_termio_cline=no)]) + + AC_MSG_RESULT($ac_cv_termio_cline) + if test $ac_cv_termio_cline = yes; then + sim_termio="$sim_termio -DHAVE_TERMIO_CLINE" + fi +else + ac_cv_termio_cline=no +fi + +dnl Check for struct statfs +AC_MSG_CHECKING(for struct statfs) +AC_CACHE_VAL(ac_cv_struct_statfs, +[AC_TRY_COMPILE([#include +#ifdef HAVE_SYS_PARAM_H +#include +#endif +#ifdef HAVE_SYS_MOUNT_H +#include +#endif +#ifdef HAVE_SYS_VFS_H +#include +#endif +#ifdef HAVE_SYS_STATFS_H +#include +#endif], +[static struct statfs s;], +ac_cv_struct_statfs=yes, ac_cv_struct_statfs=no)]) +AC_MSG_RESULT($ac_cv_struct_statfs) +if test $ac_cv_struct_statfs = yes; then + AC_DEFINE(HAVE_STRUCT_STATFS, 1, + [Define if struct statfs is defined in ]) +fi + +dnl Figure out if /dev/zero exists or not +sim_devzero="" +AC_MSG_CHECKING(for /dev/zero) +AC_CACHE_VAL(ac_cv_devzero, +[AC_TRY_RUN([#include +main () { + char buf[2048]; + int i; + int fd = open ("/dev/zero", O_RDONLY); + if (fd < 0) + return 1; + for (i = 0; i < sizeof (buf); i++) + buf[i] = 1; + if (read (fd, buf, sizeof (buf)) != sizeof (buf)) + return 1; + for (i = 0; i < sizeof (buf); i++) + if (buf[i]) + return 1; + return 0; +}],[ac_cv_devzero=yes],[ac_cv_devzero=no],[ac_cv_devzero=no])]) +AC_MSG_RESULT($ac_cv_devzero) +if test $ac_cv_devzero = yes; then + sim_devzero="-DHAVE_DEVZERO" +else + sim_devzero="" +fi + +dnl Figure out if we are in the new Cygnus tree with a common directory or not +AC_MSG_CHECKING(for common simulator directory) +if test -f "${srcdir}/../common/callback.c"; then + AC_MSG_RESULT(yes) + sim_callback="callback.o targ-map.o" + sim_targ_vals="targ-vals.h targ-map.c targ-vals.def" +else + AC_MSG_RESULT(no) + sim_callback="" + sim_targ_vals="" +fi + +AC_MSG_CHECKING(for common simulator directory fpu implementation) +if test -f "${srcdir}/../common/sim-fpu.c"; then + AC_MSG_RESULT(yes) + sim_fpu_cflags="-DHAVE_COMMON_FPU -I../common -I${srcdir}/../common" + sim_fpu="sim-fpu.o" +else + AC_MSG_RESULT(no) + sim_fpu_cflags= + sim_fpu= +fi + +dnl Check for exe extension +AC_EXEEXT + +AC_SUBST(CC_FOR_BUILD) +AC_SUBST(CFLAGS) +AC_SUBST(HDEFINES) +AR=${AR-ar} +AC_SUBST(AR) +AC_PROG_RANLIB +AC_SUBST(sim_cflags) +AC_SUBST(sim_warnings) +AC_SUBST(sim_line_nr) +AC_SUBST(sim_config) +AC_SUBST(sim_opcode) +AC_SUBST(sim_switch) +AC_SUBST(sim_dup) +AC_SUBST(sim_decode_mechanism) +AC_SUBST(sim_jump) +AC_SUBST(sim_filter) +AC_SUBST(sim_icache) +AC_SUBST(sim_hw_src) +AC_SUBST(sim_hw_obj) +AC_SUBST(sim_pk_src) +AC_SUBST(sim_pk_obj) +AC_SUBST(sim_inline) +AC_SUBST(sim_bswap) +AC_SUBST(sim_endian) +AC_SUBST(sim_regparm) +AC_SUBST(sim_stdcall) +AC_SUBST(sim_xor_endian) +AC_SUBST(sim_hostendian) +AC_SUBST(sim_smp) +AC_SUBST(sim_igen_smp) +AC_SUBST(sim_bitsize) +AC_SUBST(sim_hostbitsize) +AC_SUBST(sim_env) +AC_SUBST(sim_timebase) +AC_SUBST(sim_alignment) +AC_SUBST(sim_float) +AC_SUBST(sim_trace) +AC_SUBST(sim_assert) +AC_SUBST(sim_reserved) +AC_SUBST(sim_monitor) +AC_SUBST(sim_model) +AC_SUBST(sim_default_model) +AC_SUBST(sim_model_issue) +AC_SUBST(sim_stdio) +AC_SUBST(sim_termio) +AC_SUBST(sim_devzero) +AC_SUBST(sim_callback) +AC_SUBST(sim_targ_vals) +AC_SUBST(sim_fpu_cflags) +AC_SUBST(sim_fpu) + +AC_OUTPUT(Makefile, +[case x$CONFIG_HEADERS in xconfig.h:config.in) echo > stamp-h ;; esac]) diff --git a/sim/ppc/configure.in b/sim/ppc/configure.in deleted file mode 100644 index 7884a411..0000000 --- a/sim/ppc/configure.in +++ /dev/null @@ -1,790 +0,0 @@ -dnl Process this file with autoconf to produce a configure script. -sinclude(../common/aclocal.m4) -AC_PREREQ(2.5)dnl -AC_INIT(Makefile.in) - -AC_PROG_INSTALL -AC_PROG_CC - -# Put a plausible default for CC_FOR_BUILD in Makefile. -if test "x$cross_compiling" = "xno"; then - CC_FOR_BUILD='$(CC)' -else - CC_FOR_BUILD=gcc -fi - -dnl We don't use gettext, but bfd does. So we do the appropriate checks -dnl to see if there are intl libraries we should link against. -ALL_LINGUAS= -CY_GNU_GETTEXT - - -AC_ARG_ENABLE(sim-alignment, -[ --enable-sim-alignment=align Specify strict or nonstrict alignment.], -[case "${enableval}" in - yes | strict | STRICT) sim_alignment="-DWITH_ALIGNMENT=STRICT_ALIGNMENT";; - no | nonstrict | NONSTRICT) sim_alignment="-DWITH_ALIGNMENT=NONSTRICT_ALIGNMENT";; - 0 | default | DEFAULT) sim_alignment="-DWITH_ALIGNMENT=0";; - *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-alignment"); sim_alignment="";; -esac -if test x"$silent" != x"yes" && test x"$sim_alignment" != x""; then - echo "Setting alignment flags = $sim_alignment" 6>&1 -fi],[sim_alignment=""])dnl - - -AC_ARG_ENABLE(sim-assert, -[ --enable-sim-assert Specify whether to perform random assertions.], -[case "${enableval}" in - yes) sim_assert="-DWITH_ASSERT=1";; - no) sim_assert="-DWITH_ASSERT=0";; - *) AC_MSG_ERROR("--enable-sim-assert does not take a value"); sim_assert="";; -esac -if test x"$silent" != x"yes" && test x"$sim_assert" != x""; then - echo "Setting assert flags = $sim_assert" 6>&1 -fi],[sim_assert=""])dnl - - -AC_ARG_ENABLE(sim-bitsize, -[ --enable-sim-bitsize=n Specify target bitsize (32 or 64).], -[case "${enableval}" in - 32|64) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=$enableval";; - *) AC_MSG_ERROR("--enable-sim-bitsize was given $enableval. Expected 32 or 64"); sim_bitsize="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bitsize" != x""; then - echo "Setting bitsize flags = $sim_bitsize" 6>&1 -fi],[sim_bitsize=""])dnl - - -AC_ARG_ENABLE(sim-bswap, -[ --enable-sim-bswap Use the BSWAP instruction on Intel 486s and Pentiums.], -[case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) AC_MSG_ERROR("--enable-sim-bswap does not take a value"); sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi],[sim_bswap=""])dnl - - -AC_ARG_ENABLE(sim-cflags, -[ --enable-sim-cflags=opts Extra CFLAGS for use in building simulator], -[case "${enableval}" in - yes) sim_cflags="-O2 -fomit-frame-pointer";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi],[sim_cflags=""])dnl - - -AC_ARG_ENABLE(sim-config, -[ --enable-sim-config=file Override default config file], -[case "${enableval}" in - yes|no) AC_MSG_ERROR("No value supplied for --enable-sim-config=file");; - *) if test -f "${srcdir}/${enableval}"; then - sim_config="${enableval}"; - elif test -f "${srcdir}/${enableval}-config.h"; then - sim_config="${enableval}-config.h" - else - AC_MSG_ERROR("Config file $enableval was not found"); - sim_config=std-config.h - fi;; -esac -if test x"$silent" != x"yes" && test x"$sim_config" != x""; then - echo "Setting config flags = $sim_config" 6>&1 -fi],[sim_config="std-config.h" -if test x"$silent" != x"yes"; then - echo "Setting config flags = $sim_config" 6>&1 -fi])dnl - - -AC_ARG_ENABLE(sim-decode-mechanism, -[ --enable-sim-decode-mechanism=which Specify the instruction decode mechanism.], -[case "${enableval}" in - yes|no) AC_MSG_ERROR("No value supplied for --enable-sim-decode-mechanism=file");; - array|switch|padded-switch|goto-switch) sim_decode_mechanism="-T ${enableval}";; - *) AC_MSG_ERROR("File $enableval is not an opcode rules file"); - sim_decode_mechanism="switch";; -esac -if test x"$silent" != x"yes" && test x"$sim_decode_mechanism" != x""; then - echo "Setting decode mechanism flags = $sim_decode_mechanism" 6>&1 -fi],[sim_decode_mechanism="" -if test x"$silent" != x"yes"; then - echo "Setting decode mechanism flags = $sim_decode_mechanism" -fi])dnl - - -AC_ARG_ENABLE(sim-default-model, -[ --enable-sim-default-model=which Specify default PowerPC to model.], -[case "${enableval}" in - yes|no) AC_MSG_ERROR("No value supplied for --enable-sim-default-model=model");; - *) sim_default_model="-DWITH_DEFAULT_MODEL=${enableval}";; -esac -if test x"$silent" != x"yes" && test x"$sim_default_model" != x""; then - echo "Setting default-model flags = $sim_default_model" 6>&1 -fi],[sim_default_model=""])dnl - - -AC_ARG_ENABLE(sim-duplicate, -[ --enable-sim-duplicate Expand (duplicate) semantic functions.], -[case "${enableval}" in - yes) sim_dup="-E";; - no) sim_dup="";; - *) AC_MSG_ERROR("--enable-sim-duplicate does not take a value"); sim_dup="";; -esac -if test x"$silent" != x"yes" && test x"$sim_dup" != x""; then - echo "Setting duplicate flags = $sim_dup" 6>&1 -fi],[sim_dup="-E" -if test x"$silent" != x"yes"; then - echo "Setting duplicate flags = $sim_dup" 6>&1 -fi])dnl - - -AC_ARG_ENABLE(sim-endian, -[ --enable-sim-endian=endian Specify target byte endian orientation.], -[case "${enableval}" in - yes) case "$target" in - *powerpc-*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; - *powerpcle-*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; - *) echo "Unknown target $target" 1>&6; sim_endian="-DWITH_TARGET_BYTE_ORDER=0";; - esac;; - no) sim_endian="-DWITH_TARGET_BYTE_ORDER=0";; - b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; - *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-endian"); sim_endian="";; -esac -if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then - echo "Setting endian flags = $sim_endian" 6>&1 -fi],[sim_endian=""])dnl - - -AC_ARG_ENABLE(sim-env, -[ --enable-sim-env=env Specify target environment (operating, virtual, user).], -[case "${enableval}" in - operating | os | oea) sim_env="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";; - virtual | vea) sim_env="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";; - user | uea) sim_env="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";; - no) sim_env="-DWITH_ENVIRONMENT=0";; - *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-env"); sim_env="";; -esac -if test x"$silent" != x"yes" && test x"$sim_env" != x""; then - echo "Setting env flags = $sim_env" 6>&1 -fi],[sim_env=""])dnl - - -AC_ARG_ENABLE(sim-filter, -[ --enable-sim-filter=rule Specify filter rules.], -[case "${enableval}" in - yes) AC_MSG_ERROR("--enable-sim-filter must be specified with a rule to filter or no"); sim_filter="";; - no) sim_filter="";; - *) sim_filter="-F $enableval";; -esac -if test x"$silent" != x"yes" && test x"$sim_filter" != x""; then - echo "Setting filter flags = $sim_filter" 6>&1 -fi],[sim_filter="-F 32,f,o" -if test x"$silent" != x"yes"; then - echo "Setting filter flags = $sim_filter" 6>&1 -fi])dnl - - -AC_ARG_ENABLE(sim-float, -[ --enable-sim-float Specify whether the target has hard, soft, altivec or e500 floating point.], -[case "${enableval}" in - yes | hard) sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT";; - no | soft) sim_float="-DWITH_FLOATING_POINT=SOFT_FLOATING_POINT";; - altivec) sim_float="-DWITH_ALTIVEC" ; sim_filter="${sim_filter},av" ;; - *spe*|*simd*) sim_float="-DWITH_E500" ; sim_filter="${sim_filter},e500" ;; - *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-float"); sim_float="";; -esac -if test x"$silent" != x"yes" && test x"$sim_float" != x""; then - echo "Setting float flags = $sim_float" 6>&1 -fi],[ -case "${target}" in - *altivec*) sim_float="-DWITH_ALTIVEC" ; sim_filter="${sim_filter},av" ;; - *spe*|*simd*) sim_float="-DWITH_E500" ; sim_filter="${sim_filter},e500" ;; - *) sim_float="" -esac -])dnl - - -AC_ARG_ENABLE(sim-hardware, -[ --enable-sim-hardware=list Specify the hardware to be included in the build.], -[hardware="cpu,memory,nvram,iobus,htab,disk,trace,register,vm,init,core,pal,com,eeprom,opic,glue,phb,ide" -case "${enableval}" in - yes) ;; - no) AC_MSG_ERROR("List of hardware must be specified for --enable-sim-hardware"); hardware="";; - ,*) hardware="${hardware}${enableval}";; - *,) hardware="${enableval}${hardware}";; - *) hardware="${enableval}"'';; -esac -sim_hw_src=`echo $hardware | sed -e 's/,/.c hw_/g' -e 's/^/hw_/' -e s'/$/.c/'` -sim_hw_obj=`echo $sim_hw_src | sed -e 's/\.c/.o/g'` -if test x"$silent" != x"yes" && test x"$hardware" != x""; then - echo "Setting hardware to $sim_hw_src, $sim_hw_obj" -fi],[hardware="cpu,memory,nvram,iobus,htab,disk,trace,register,vm,init,core,pal,com,eeprom,opic,glue,phb,ide" -sim_hw_src=`echo $hardware | sed -e 's/,/.c hw_/g' -e 's/^/hw_/' -e s'/$/.c/'` -sim_hw_obj=`echo $sim_hw_src | sed -e 's/\.c/.o/g'` -if test x"$silent" != x"yes"; then - echo "Setting hardware to $sim_hw_src, $sim_hw_obj" -fi])dnl - - -AC_ARG_ENABLE(sim-hostbitsize, -[ --enable-sim-hostbitsize=32|64 Specify host bitsize (32 or 64).], -[case "${enableval}" in - 32|64) sim_hostbitsize="-DWITH_HOST_WORD_BITSIZE=$enableval";; - *) AC_MSG_ERROR("--enable-sim-hostbitsize was given $enableval. Expected 32 or 64"); sim_hostbitsize="";; -esac -if test x"$silent" != x"yes" && test x"$sim_hostbitsize" != x""; then - echo "Setting hostbitsize flags = $sim_hostbitsize" 6>&1 -fi],[sim_hostbitsize=""])dnl - - -AC_ARG_ENABLE(sim-hostendian, -[ --enable-sim-hostendian=end Specify host byte endian orientation.], -[case "${enableval}" in - no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";; - b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";; - *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-hostendian"); sim_hostendian="";; -esac -if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then - echo "Setting hostendian flags = $sim_hostendian" 6>&1 -fi],[ -if test "x$cross_compiling" = "xno"; then - AC_C_BIGENDIAN - if test $ac_cv_c_bigendian = yes; then - sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN" - else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN" - fi -else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" -fi])dnl - - -AC_ARG_ENABLE(sim-icache, -[ --enable-sim-icache=size Specify instruction-decode cache size and type.], -[icache="-R" - case "${enableval}" in - yes) icache="1024"; sim_icache="-I $icache";; - no) sim_icache="-R";; - *) icache=1024 - sim_icache="-" - for x in `echo "${enableval}" | sed -e "s/,/ /g"`; do - case "$x" in - define) sim_icache="${sim_icache}R";; - semantic) sim_icache="${sim_icache}C";; - insn) sim_icache="${sim_icache}S";; - 0*|1*|2*|3*|4*|5*|6*|7*|8*|9*) icache=$x;; - *) AC_MSG_ERROR("Unknown value $x for --enable-sim-icache"); sim_icache="";; - esac - done - sim_icache="${sim_icache}I $icache";; -esac -if test x"$silent" != x"yes" && test x"$icache" != x""; then - echo "Setting instruction cache size to $icache ($sim_icache)" -fi],[sim_icache="-CSRI 1024" -if test x"$silent" != x"yes"; then - echo "Setting instruction cache size to 1024 ($sim_icache)" -fi])dnl - - -AC_ARG_ENABLE(sim-inline, -[ --enable-sim-inline=inlines Specify which functions should be inlined.], -[sim_inline="" -case "$enableval" in - no) sim_inline="-DDEFAULT_INLINE=0";; - 0) sim_inline="-DDEFAULT_INLINE=0";; - yes | 2) sim_inline="-DDEFAULT_INLINE=ALL_INLINE";; - 1) sim_inline="-DDEFAULT_INLINE=PSIM_INLINE_LOCALS";; - *) for x in `echo "$enableval" | sed -e "s/,/ /g"`; do - new_flag="" - case "$x" in - *_INLINE=*) new_flag="-D$x";; - *=*) new_flag=`echo "$x" | sed -e "s/=/_INLINE=/" -e "s/^/-D/"`;; - *_INLINE) new_flag="-D$x=ALL_INLINE";; - *) new_flag="-D$x""_INLINE=ALL_INLINE";; - esac - if test x"$sim_inline" = x""; then - sim_inline="$new_flag" - else - sim_inline="$sim_inline $new_flag" - fi - done;; -esac -if test x"$silent" != x"yes" && test x"$sim_inline" != x""; then - echo "Setting inline flags = $sim_inline" 6>&1 -fi],[if test x"$GCC" != ""; then - sim_inline="-DDEFAULT_INLINE=PSIM_INLINE_LOCALS" - if test x"$silent" != x"yes"; then - echo "Setting inline flags = $sim_inline" 6>&1 - fi -else - sim_inline="" -fi])dnl - - -AC_ARG_ENABLE(sim-jump, -[ --enable-sim-jump Jump between semantic code (instead of call/return).], -[case "${enableval}" in - yes) sim_jump="-J";; - no) sim_jump="";; - *) AC_MSG_ERROR("--enable-sim-jump does not take a value"); sim_jump="";; -esac -if test x"$silent" != x"yes" && test x"$sim_jump" != x""; then - echo "Setting jump flag = $sim_jump" 6>&1 -fi],[sim_jump="" -if test x"$silent" != x"yes"; then - echo "Setting jump flag = $sim_jump" 6>&1 -fi])dnl - - -AC_ARG_ENABLE(sim-line-nr, -[ --enable-sim-line-nr=opts Generate extra CPP code that references source rather than generated code], -[case "${enableval}" in - yes) sim_line_nr="";; - no) sim_line_nr="-L";; - *) AC_MSG_ERROR("--enable-sim-line-nr does not take a value"); sim_line_nr="";; -esac -if test x"$silent" != x"yes" && test x"$sim_line_nr" != x""; then - echo "Setting warning flags = $sim_line_nr" 6>&1 -fi],[sim_line_nr=""])dnl - - -AC_ARG_ENABLE(sim-model, -[ --enable-sim-model=which Specify PowerPC to model.], -[case "${enableval}" in - yes|no) AC_MSG_ERROR("No value supplied for --enable-sim-model=model");; - *) sim_model="-DWITH_MODEL=${enableval}";; -esac -if test x"$silent" != x"yes" && test x"$sim_model" != x""; then - echo "Setting model flags = $sim_model" 6>&1 -fi],[sim_model=""])dnl - - -AC_ARG_ENABLE(sim-model-issue, -[ --enable-sim-model-issue Specify whether to simulate model specific actions], -[case "${enableval}" in - yes) sim_model_issue="-DWITH_MODEL_ISSUE=MODEL_ISSUE_PROCESS";; - no) sim_model_issue="-DWITH_MODEL_ISSUE=MODEL_ISSUE_IGNORE";; - *) AC_MSG_ERROR("--enable-sim-model-issue does not take a value"); sim_model_issue="";; -esac -if test x"$silent" != x"yes"; then - echo "Setting model-issue flags = $sim_model_issue" 6>&1 -fi],[sim_model_issue=""])dnl - - -AC_ARG_ENABLE(sim-monitor, -[ --enable-sim-monitor=mon Specify whether to enable monitoring events.], -[case "${enableval}" in - yes) sim_monitor="-DWITH_MON='MONITOR_INSTRUCTION_ISSUE | MONITOR_LOAD_STORE_UNIT'";; - no) sim_monitor="-DWITH_MON=0";; - instruction) sim_monitor="-DWITH_MON=MONITOR_INSTRUCTION_ISSUE";; - memory) sim_monitor="-DWITH_MON=MONITOR_LOAD_STORE_UNIT";; - *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-mon"); sim_env="";; -esac -if test x"$silent" != x"yes" && test x"$sim_monitor" != x""; then - echo "Setting monitor flags = $sim_monitor" 6>&1 -fi],[sim_monitor=""])dnl - - -AC_ARG_ENABLE(sim-opcode, -[ --enable-sim-opcode=which Override default opcode lookup.], -[case "${enableval}" in - yes|no) AC_MSG_ERROR("No value supplied for --enable-sim-opcode=file");; - *) if test -f "${srcdir}/${enableval}"; then - sim_opcode="${enableval}" - elif test -f "${srcdir}/dc-${enableval}"; then - sim_opcode="dc-${enableval}" - else - AC_MSG_ERROR("File $enableval is not an opcode rules file"); - sim_opcode="dc-complex" - fi;; -esac -if test x"$silent" != x"yes" && test x"$sim_opcode" != x""; then - echo "Setting opcode flags = $sim_opcode" 6>&1 -fi],[sim_opcode="dc-complex" -if test x"$silent" != x"yes"; then - echo "Setting opcode flags = $sim_opcode" -fi])dnl - - -AC_ARG_ENABLE(sim-packages, -[ --enable-sim-packages=list Specify the packages to be included in the build.], -[packages=disklabel -case "${enableval}" in - yes) ;; - no) AC_MSG_ERROR("List of packages must be specified for --enable-sim-packages"); packages="";; - ,*) packages="${packages}${enableval}";; - *,) packages="${enableval}${packages}";; - *) packages="${enableval}"'';; -esac -sim_pk_src=`echo $packages | sed -e 's/,/.c pk_/g' -e 's/^/pk_/' -e 's/$/.c/'` -sim_pk_obj=`echo $sim_pk_src | sed -e 's/\.c/.o/g'` -if test x"$silent" != x"yes" && test x"$packages" != x""; then - echo "Setting packages to $sim_pk_src, $sim_pk_obj" -fi],[packages=disklabel -sim_pk_src=`echo $packages | sed -e 's/,/.c pk_/g' -e 's/^/pk_/' -e 's/$/.c/'` -sim_pk_obj=`echo $sim_pk_src | sed -e 's/\.c/.o/g'` -if test x"$silent" != x"yes"; then - echo "Setting packages to $sim_pk_src, $sim_pk_obj" -fi])dnl - - -AC_ARG_ENABLE(sim-regparm, -[ --enable-sim-regparm=nr-parm Pass parameters in registers instead of on the stack - x86/GCC specific.], -[case "${enableval}" in - 0*|1*|2*|3*|4*|5*|6*|7*|8*|9*) sim_regparm="-DWITH_REGPARM=${enableval}";; - no) sim_regparm="" ;; - yes) sim_regparm="-DWITH_REGPARM=3";; - *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-regparm"); sim_regparm="";; -esac -if test x"$silent" != x"yes" && test x"$sim_regparm" != x""; then - echo "Setting regparm flags = $sim_regparm" 6>&1 -fi],[sim_regparm=""])dnl - - -AC_ARG_ENABLE(sim-reserved-bits, -[ --enable-sim-reserved-bits Specify whether to check reserved bits in instruction.], -[case "${enableval}" in - yes) sim_reserved="-DWITH_RESERVED_BITS=1";; - no) sim_reserved="-DWITH_RESERVED_BITS=0";; - *) AC_MSG_ERROR("--enable-sim-reserved-bits does not take a value"); sim_reserved="";; -esac -if test x"$silent" != x"yes" && test x"$sim_reserved" != x""; then - echo "Setting reserved flags = $sim_reserved" 6>&1 -fi],[sim_reserved=""])dnl - - -AC_ARG_ENABLE(sim-smp, -[ --enable-sim-smp=n Specify number of processors to configure for.], -[case "${enableval}" in - yes) sim_smp="-DWITH_SMP=5" ; sim_igen_smp="-N 5";; - no) sim_smp="-DWITH_SMP=0" ; sim_igen_smp="-N 0";; - *) sim_smp="-DWITH_SMP=$enableval" ; sim_igen_smp="-N $enableval";; -esac -if test x"$silent" != x"yes" && test x"$sim_smp" != x""; then - echo "Setting smp flags = $sim_smp" 6>&1 -fi],[sim_smp="-DWITH_SMP=5" ; sim_igen_smp="-N 5" -if test x"$silent" != x"yes"; then - echo "Setting smp flags = $sim_smp" 6>&1 -fi])dnl - - -AC_ARG_ENABLE(sim-stdcall, -[ --enable-sim-stdcall=type Use an alternative function call/return mechanism - x86/GCC specific.], -[case "${enableval}" in - no) sim_stdcall="" ;; - std*) sim_stdcall="-DWITH_STDCALL=1";; - yes) sim_stdcall="-DWITH_STDCALL=1";; - *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-stdcall"); sim_stdcall="";; -esac -if test x"$silent" != x"yes" && test x"$sim_stdcall" != x""; then - echo "Setting function call flags = $sim_stdcall" 6>&1 -fi],[sim_stdcall=""])dnl - - -AC_ARG_ENABLE(sim-stdio, -[ --enable-sim-stdio Specify whether to use stdio for console input/output.], -[case "${enableval}" in - yes) sim_stdio="-DWITH_STDIO=DO_USE_STDIO";; - no) sim_stdio="-DWITH_STDIO=DONT_USE_STDIO";; - *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-stdio"); sim_stdio="";; -esac -if test x"$silent" != x"yes" && test x"$sim_stdio" != x""; then - echo "Setting stdio flags = $sim_stdio" 6>&1 -fi],[sim_stdio=""])dnl - - -AC_ARG_ENABLE(sim-switch, -[ --enable-sim-switch Use a switch instead of a table for instruction call.], -[case "${enableval}" in - yes) sim_switch="-s";; - no) sim_switch="";; - *) AC_MSG_ERROR("--enable-sim-switch does not take a value"); sim_switch="";; -esac -if test x"$silent" != x"yes" && test x"$sim_switch" != x""; then - echo "Setting switch flags = $sim_switch" 6>&1 -fi],[sim_switch=""; -if test x"$silent" != x"yes"; then - echo "Setting switch flags = $sim_switch" 6>&1 -fi])dnl - - -AC_ARG_ENABLE(sim-timebase, -[ --enable-sim-timebase Specify whether the PPC timebase is supported.], -[case "${enableval}" in - yes) sim_timebase="-DWITH_TIME_BASE=1";; - no) sim_timebase="-DWITH_TIME_BASE=0";; - *) AC_MSG_ERROR("--enable-sim-timebase does not take a value"); sim_timebase="";; -esac -if test x"$silent" != x"yes" && test x"$sim_timebase" != x""; then - echo "Setting timebase flags = $sim_timebase" 6>&1 -fi],[sim_timebase=""])dnl - - -AC_ARG_ENABLE(sim-trace, -[ --enable-sim-trace Specify whether tracing is supported.], -[case "${enableval}" in - yes) sim_trace="-DWITH_TRACE=1";; - no) sim_trace="-DWITH_TRACE=0";; - *) AC_MSG_ERROR("--enable-sim-trace does not take a value"); sim_trace="";; -esac -if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then - echo "Setting trace flags = $sim_trace" 6>&1 -fi],[sim_trace=""])dnl - - -AC_ARG_ENABLE(sim-warnings, -[ --enable-sim-warnings=opts Extra CFLAGS for turning on compiler warnings except for idecode.o, semantics.o and psim.o], -[case "${enableval}" in - yes) sim_warnings="-Werror -Wall -Wpointer-arith -Wmissing-prototypes -Wmissing-declarations ";; - no) sim_warnings="-w";; - *) sim_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_warnings" != x""; then - echo "Setting warning flags = $sim_warnings" 6>&1 -fi],[sim_warnings=""])dnl - - -AC_ARG_ENABLE(sim-xor-endian, -[ --enable-sim-xor-endian=n Specify number bytes involved in PowerPC XOR bi-endian mode (default 8).], -[case "${enableval}" in - yes) sim_xor_endian="-DWITH_XOR_ENDIAN=8";; - no) sim_xor_endian="-DWITH_XOR_ENDIAN=0";; - *) sim_xor_endian="-DWITH_XOR_ENDIAN=$enableval";; -esac -if test x"$silent" != x"yes" && test x"$sim_xor_endian" != x""; then - echo "Setting xor-endian flag = $sim_xor_endian" 6>&1 -fi],[sim_xor_endian=""])dnl - - -AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/../..) -AC_CANONICAL_SYSTEM -AC_ARG_PROGRAM - -. ${srcdir}/../../bfd/configure.host - -AC_CONFIG_HEADER(config.h:config.in) - -AC_STRUCT_ST_BLKSIZE -AC_STRUCT_ST_BLOCKS -AC_STRUCT_ST_RDEV -AC_STRUCT_TIMEZONE - -AC_TYPE_GETGROUPS -AC_TYPE_MODE_T -AC_TYPE_OFF_T -AC_TYPE_PID_T -AC_TYPE_SIGNAL -AC_TYPE_SIZE_T -AC_TYPE_UID_T - -AC_CHECK_FUNCS(access cfgetispeed cfgetospeed cfsetispeed cfsetospeed chdir chmod chown dup dup2 fchmod fchown fcntl fstat fstatfs getdirentries getegid geteuid getgid getpid getppid getrusage gettimeofday getuid ioctl kill link lseek lstat mkdir pipe readlink rmdir setreuid setregid stat sigprocmask stat symlink tcgetattr tcsetattr tcsendbreak tcdrain tcflush tcflow tcgetpgrp tcsetpgrp time umask unlink) - -AC_CHECK_HEADERS(fcntl.h stdlib.h string.h strings.h sys/ioctl.h sys/mount.h sys/param.h sys/resource.h sys/stat.h sys/termio.h sys/termios.h sys/time.h sys/times.h sys/types.h time.h unistd.h sys/vfs.h sys/statfs.h) -AC_HEADER_DIRENT - -dnl Figure out what type of termio/termios support there is -sim_termio="" -AC_MSG_CHECKING(for struct termios) -AC_CACHE_VAL(ac_cv_termios_struct, -[AC_TRY_COMPILE([#include -#include ], -[static struct termios x; - x.c_iflag = 0; - x.c_oflag = 0; - x.c_cflag = 0; - x.c_lflag = 0; - x.c_cc[NCCS] = 0;], -ac_cv_termios_struct=yes, ac_cv_termios_struct=no)]) -AC_MSG_RESULT($ac_cv_termios_struct) -if test $ac_cv_termios_struct = yes; then - sim_termio="$sim_termio -DHAVE_TERMIOS_STRUCTURE" -fi - -if test "$ac_cv_termios_struct" = "yes"; then - AC_MSG_CHECKING(for c_line field in struct termios) - AC_CACHE_VAL(ac_cv_termios_cline, - [AC_TRY_COMPILE([#include -#include ], -[static struct termios x; x.c_line = 0;], - ac_cv_termios_cline=yes, ac_cv_termios_cline=no)]) - - AC_MSG_RESULT($ac_cv_termios_cline) - if test $ac_cv_termios_cline = yes; then - sim_termio="$sim_termio -DHAVE_TERMIOS_CLINE" - fi -else - ac_cv_termios_cline=no -fi - -if test "$ac_cv_termios_struct" != "yes"; then - AC_MSG_CHECKING(for struct termio) - AC_CACHE_VAL(ac_cv_termio_struct, - [AC_TRY_COMPILE([#include -#include ], -[static struct termio x; - x.c_iflag = 0; - x.c_oflag = 0; - x.c_cflag = 0; - x.c_lflag = 0; - x.c_cc[NCC] = 0;], -ac_cv_termio_struct=yes, ac_cv_termio_struct=no)]) - AC_MSG_RESULT($ac_cv_termio_struct) - if test $ac_cv_termio_struct = yes; then - sim_termio="$sim_termio -DHAVE_TERMIO_STRUCTURE" - fi -else - ac_cv_termio_struct=no -fi - -if test "$ac_cv_termio_struct" = "yes"; then - AC_MSG_CHECKING(for c_line field in struct termio) - AC_CACHE_VAL(ac_cv_termio_cline, - [AC_TRY_COMPILE([#include -#include ], -[static struct termio x; x.c_line = 0;], - ac_cv_termio_cline=yes, ac_cv_termio_cline=no)]) - - AC_MSG_RESULT($ac_cv_termio_cline) - if test $ac_cv_termio_cline = yes; then - sim_termio="$sim_termio -DHAVE_TERMIO_CLINE" - fi -else - ac_cv_termio_cline=no -fi - -dnl Check for struct statfs -AC_MSG_CHECKING(for struct statfs) -AC_CACHE_VAL(ac_cv_struct_statfs, -[AC_TRY_COMPILE([#include -#ifdef HAVE_SYS_PARAM_H -#include -#endif -#ifdef HAVE_SYS_MOUNT_H -#include -#endif -#ifdef HAVE_SYS_VFS_H -#include -#endif -#ifdef HAVE_SYS_STATFS_H -#include -#endif], -[static struct statfs s;], -ac_cv_struct_statfs=yes, ac_cv_struct_statfs=no)]) -AC_MSG_RESULT($ac_cv_struct_statfs) -if test $ac_cv_struct_statfs = yes; then - AC_DEFINE(HAVE_STRUCT_STATFS, 1, - [Define if struct statfs is defined in ]) -fi - -dnl Figure out if /dev/zero exists or not -sim_devzero="" -AC_MSG_CHECKING(for /dev/zero) -AC_CACHE_VAL(ac_cv_devzero, -[AC_TRY_RUN([#include -main () { - char buf[2048]; - int i; - int fd = open ("/dev/zero", O_RDONLY); - if (fd < 0) - return 1; - for (i = 0; i < sizeof (buf); i++) - buf[i] = 1; - if (read (fd, buf, sizeof (buf)) != sizeof (buf)) - return 1; - for (i = 0; i < sizeof (buf); i++) - if (buf[i]) - return 1; - return 0; -}],[ac_cv_devzero=yes],[ac_cv_devzero=no],[ac_cv_devzero=no])]) -AC_MSG_RESULT($ac_cv_devzero) -if test $ac_cv_devzero = yes; then - sim_devzero="-DHAVE_DEVZERO" -else - sim_devzero="" -fi - -dnl Figure out if we are in the new Cygnus tree with a common directory or not -AC_MSG_CHECKING(for common simulator directory) -if test -f "${srcdir}/../common/callback.c"; then - AC_MSG_RESULT(yes) - sim_callback="callback.o targ-map.o" - sim_targ_vals="targ-vals.h targ-map.c targ-vals.def" -else - AC_MSG_RESULT(no) - sim_callback="" - sim_targ_vals="" -fi - -AC_MSG_CHECKING(for common simulator directory fpu implementation) -if test -f "${srcdir}/../common/sim-fpu.c"; then - AC_MSG_RESULT(yes) - sim_fpu_cflags="-DHAVE_COMMON_FPU -I../common -I${srcdir}/../common" - sim_fpu="sim-fpu.o" -else - AC_MSG_RESULT(no) - sim_fpu_cflags= - sim_fpu= -fi - -dnl Check for exe extension -AC_EXEEXT - -AC_SUBST(CC_FOR_BUILD) -AC_SUBST(CFLAGS) -AC_SUBST(HDEFINES) -AR=${AR-ar} -AC_SUBST(AR) -AC_PROG_RANLIB -AC_SUBST(sim_cflags) -AC_SUBST(sim_warnings) -AC_SUBST(sim_line_nr) -AC_SUBST(sim_config) -AC_SUBST(sim_opcode) -AC_SUBST(sim_switch) -AC_SUBST(sim_dup) -AC_SUBST(sim_decode_mechanism) -AC_SUBST(sim_jump) -AC_SUBST(sim_filter) -AC_SUBST(sim_icache) -AC_SUBST(sim_hw_src) -AC_SUBST(sim_hw_obj) -AC_SUBST(sim_pk_src) -AC_SUBST(sim_pk_obj) -AC_SUBST(sim_inline) -AC_SUBST(sim_bswap) -AC_SUBST(sim_endian) -AC_SUBST(sim_regparm) -AC_SUBST(sim_stdcall) -AC_SUBST(sim_xor_endian) -AC_SUBST(sim_hostendian) -AC_SUBST(sim_smp) -AC_SUBST(sim_igen_smp) -AC_SUBST(sim_bitsize) -AC_SUBST(sim_hostbitsize) -AC_SUBST(sim_env) -AC_SUBST(sim_timebase) -AC_SUBST(sim_alignment) -AC_SUBST(sim_float) -AC_SUBST(sim_trace) -AC_SUBST(sim_assert) -AC_SUBST(sim_reserved) -AC_SUBST(sim_monitor) -AC_SUBST(sim_model) -AC_SUBST(sim_default_model) -AC_SUBST(sim_model_issue) -AC_SUBST(sim_stdio) -AC_SUBST(sim_termio) -AC_SUBST(sim_devzero) -AC_SUBST(sim_callback) -AC_SUBST(sim_targ_vals) -AC_SUBST(sim_fpu_cflags) -AC_SUBST(sim_fpu) - -AC_OUTPUT(Makefile, -[case x$CONFIG_HEADERS in xconfig.h:config.in) echo > stamp-h ;; esac]) -- cgit v1.1