From 5836a818eccb180d75c92ce4c861abb6fe8dec23 Mon Sep 17 00:00:00 2001
From: Patrick Palka <patrick@parcs.ath.cx>
Date: Sat, 25 Jul 2015 15:41:05 -0400
Subject: Revert "Sync readline/ to version 7.0 alpha"

This reverts commit b558ff043d41ba8d17a82f5f9ae5f9dade66160e.
This reverts commit 4a11f2065906976675808364ddbd1c0f77eea41f.

The initial import commit failed to retain local changes made to
readline's configure.in (and the commit message erroneously stated that
there were no local changes that needed to be reapplied).  Also the
import caused a couple of build errors and a scattering of testsuite
regressions throughout many arches.  It's probably better to start over
with this import, hopefully more carefully next time.
---
 readline/support/config.guess  | 587 +++++++++++++++++++----------------------
 readline/support/config.sub    | 332 +++++++----------------
 readline/support/mkdist        |  15 +-
 readline/support/shlib-install |   9 +-
 readline/support/shobj-conf    |  71 ++---
 5 files changed, 411 insertions(+), 603 deletions(-)

(limited to 'readline/support')

diff --git a/readline/support/config.guess b/readline/support/config.guess
index 9afd676..994d98a 100755
--- a/readline/support/config.guess
+++ b/readline/support/config.guess
@@ -1,12 +1,14 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
-#   Copyright 1992-2013 Free Software Foundation, Inc.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
+#   Free Software Foundation, Inc.
 
-timestamp='2013-11-29'
+timestamp='2008-03-12'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
+# the Free Software Foundation; either version 2 of the License, or
 # (at your option) any later version.
 #
 # This program is distributed in the hope that it will be useful, but
@@ -15,22 +17,26 @@ timestamp='2013-11-29'
 # General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, see <http://www.gnu.org/licenses/>.
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
 #
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that
-# program.  This Exception is an additional permission under section 7
-# of the GNU General Public License, version 3 ("GPLv3").
-#
-# Originally written by Per Bothner.
+# the same distribution terms that you use for the rest of that program.
+
+
+# Originally written by Per Bothner <per@bothner.com>.
+# Please send patches to <config-patches@gnu.org>.  Submit a context
+# diff and a properly formatted ChangeLog entry.
 #
-# You can get the latest version of this script from:
-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+# This script attempts to guess a canonical system name similar to
+# config.sub.  If it succeeds, it prints the system name on stdout, and
+# exits with 0.  Otherwise, it exits with 1.
 #
-# Please send patches with a ChangeLog entry to config-patches@gnu.org.
-
+# The plan is that this can be called by configure scripts if you
+# don't specify an explicit build system type.
 
 me=`echo "$0" | sed -e 's,.*/,,'`
 
@@ -50,7 +56,8 @@ version="\
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright 1992-2013 Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006, 2007, 2008,2009 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -132,33 +139,12 @@ UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
 UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
 UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
 
-case "${UNAME_SYSTEM}" in
-Linux|GNU|GNU/*)
-	# If the system lacks a compiler, then just pick glibc.
-	# We could probably try harder.
-	LIBC=gnu
-
-	eval $set_cc_for_build
-	cat <<-EOF > $dummy.c
-	#include <features.h>
-	#if defined(__UCLIBC__)
-	LIBC=uclibc
-	#elif defined(__dietlibc__)
-	LIBC=dietlibc
-	#else
-	LIBC=gnu
-	#endif
-	EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
-	;;
-esac
-
 # Note: order is significant - the case branches are not exclusive.
 
 case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     *:NetBSD:*:*)
 	# NetBSD (nbsd) targets should (where applicable) match one or
-	# more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
+	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
 	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
 	# switched to ELF, *-*-netbsd* would select the old
 	# object file format.  This provides both forward
@@ -184,7 +170,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
 		eval $set_cc_for_build
 		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
-			| grep -q __ELF__
+			| grep __ELF__ >/dev/null
 		then
 		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
 		    # Return netbsd for either.  FIX?
@@ -194,7 +180,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 		fi
 		;;
 	    *)
-		os=netbsd
+	        os=netbsd
 		;;
 	esac
 	# The OS release
@@ -215,10 +201,6 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
 	echo "${machine}-${os}${release}"
 	exit ;;
-    *:Bitrig:*:*)
-	UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
-	echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE}
-	exit ;;
     *:OpenBSD:*:*)
 	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
 	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
@@ -241,7 +223,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
 		;;
 	*5.*)
-		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+	        UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
 		;;
 	esac
 	# According to Compaq, /usr/sbin/psrinfo has been available on
@@ -287,10 +269,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	# A Xn.n version is an unreleased experimental baselevel.
 	# 1.2 uses "1.2" for uname -r.
 	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-	# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
-	exitcode=$?
-	trap '' 0
-	exit $exitcode ;;
+	exit ;;
     Alpha\ *:Windows_NT*:*)
 	# How do we know it's Interix rather than the generic POSIX subsystem?
 	# Should we change UNAME_MACHINE based on the output of uname instead
@@ -316,12 +295,12 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	echo s390-ibm-zvmoe
 	exit ;;
     *:OS400:*:*)
-	echo powerpc-ibm-os400
+        echo powerpc-ibm-os400
 	exit ;;
     arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
 	echo arm-acorn-riscix${UNAME_RELEASE}
 	exit ;;
-    arm*:riscos:*:*|arm*:RISCOS:*:*)
+    arm:riscos:*:*|arm:RISCOS:*:*)
 	echo arm-unknown-riscos
 	exit ;;
     SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
@@ -345,33 +324,14 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	case `/usr/bin/uname -p` in
 	    sparc) echo sparc-icl-nx7; exit ;;
 	esac ;;
-    s390x:SunOS:*:*)
-	echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
     sun4H:SunOS:5.*:*)
 	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
     sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
 	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
-    i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
-	echo i386-pc-auroraux${UNAME_RELEASE}
-	exit ;;
     i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
-	eval $set_cc_for_build
-	SUN_ARCH="i386"
-	# If there is a compiler, see if it is configured for 64-bit objects.
-	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
-	# This test works for both compilers.
-	if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
-	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
-		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
-		grep IS_64BIT_ARCH >/dev/null
-	    then
-		SUN_ARCH="x86_64"
-	    fi
-	fi
-	echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
     sun4*:SunOS:6*:*)
 	# According to config.sub, this is the proper way to canonicalize
@@ -415,23 +375,23 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     # MiNT.  But MiNT is downward compatible to TOS, so this should
     # be no problem.
     atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
-	echo m68k-atari-mint${UNAME_RELEASE}
+        echo m68k-atari-mint${UNAME_RELEASE}
 	exit ;;
     atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
 	echo m68k-atari-mint${UNAME_RELEASE}
-	exit ;;
+        exit ;;
     *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
-	echo m68k-atari-mint${UNAME_RELEASE}
+        echo m68k-atari-mint${UNAME_RELEASE}
 	exit ;;
     milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
-	echo m68k-milan-mint${UNAME_RELEASE}
-	exit ;;
+        echo m68k-milan-mint${UNAME_RELEASE}
+        exit ;;
     hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
-	echo m68k-hades-mint${UNAME_RELEASE}
-	exit ;;
+        echo m68k-hades-mint${UNAME_RELEASE}
+        exit ;;
     *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
-	echo m68k-unknown-mint${UNAME_RELEASE}
-	exit ;;
+        echo m68k-unknown-mint${UNAME_RELEASE}
+        exit ;;
     m68k:machten:*:*)
 	echo m68k-apple-machten${UNAME_RELEASE}
 	exit ;;
@@ -501,8 +461,8 @@ EOF
 	echo m88k-motorola-sysv3
 	exit ;;
     AViiON:dgux:*:*)
-	# DG/UX returns AViiON for all architectures
-	UNAME_PROCESSOR=`/usr/bin/uname -p`
+        # DG/UX returns AViiON for all architectures
+        UNAME_PROCESSOR=`/usr/bin/uname -p`
 	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
 	then
 	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
@@ -515,7 +475,7 @@ EOF
 	else
 	    echo i586-dg-dgux${UNAME_RELEASE}
 	fi
-	exit ;;
+ 	exit ;;
     M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
 	echo m88k-dolphin-sysv3
 	exit ;;
@@ -572,7 +532,7 @@ EOF
 		echo rs6000-ibm-aix3.2
 	fi
 	exit ;;
-    *:AIX:*:[4567])
+    *:AIX:*:[456])
 	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
 	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
 		IBM_ARCH=rs6000
@@ -615,52 +575,52 @@ EOF
 	    9000/[678][0-9][0-9])
 		if [ -x /usr/bin/getconf ]; then
 		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
-		    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
-		    case "${sc_cpu_version}" in
-		      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
-		      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
-		      532)                      # CPU_PA_RISC2_0
-			case "${sc_kernel_bits}" in
-			  32) HP_ARCH="hppa2.0n" ;;
-			  64) HP_ARCH="hppa2.0w" ;;
+                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+                    case "${sc_cpu_version}" in
+                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+                      532)                      # CPU_PA_RISC2_0
+                        case "${sc_kernel_bits}" in
+                          32) HP_ARCH="hppa2.0n" ;;
+                          64) HP_ARCH="hppa2.0w" ;;
 			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
-			esac ;;
-		    esac
+                        esac ;;
+                    esac
 		fi
 		if [ "${HP_ARCH}" = "" ]; then
 		    eval $set_cc_for_build
-		    sed 's/^		//' << EOF >$dummy.c
+		    sed 's/^              //' << EOF >$dummy.c
 
-		#define _HPUX_SOURCE
-		#include <stdlib.h>
-		#include <unistd.h>
+              #define _HPUX_SOURCE
+              #include <stdlib.h>
+              #include <unistd.h>
 
-		int main ()
-		{
-		#if defined(_SC_KERNEL_BITS)
-		    long bits = sysconf(_SC_KERNEL_BITS);
-		#endif
-		    long cpu  = sysconf (_SC_CPU_VERSION);
+              int main ()
+              {
+              #if defined(_SC_KERNEL_BITS)
+                  long bits = sysconf(_SC_KERNEL_BITS);
+              #endif
+                  long cpu  = sysconf (_SC_CPU_VERSION);
 
-		    switch (cpu)
-			{
-			case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
-			case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
-			case CPU_PA_RISC2_0:
-		#if defined(_SC_KERNEL_BITS)
-			    switch (bits)
-				{
-				case 64: puts ("hppa2.0w"); break;
-				case 32: puts ("hppa2.0n"); break;
-				default: puts ("hppa2.0"); break;
-				} break;
-		#else  /* !defined(_SC_KERNEL_BITS) */
-			    puts ("hppa2.0"); break;
-		#endif
-			default: puts ("hppa1.0"); break;
-			}
-		    exit (0);
-		}
+                  switch (cpu)
+              	{
+              	case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+              	case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+              	case CPU_PA_RISC2_0:
+              #if defined(_SC_KERNEL_BITS)
+              	    switch (bits)
+              		{
+              		case 64: puts ("hppa2.0w"); break;
+              		case 32: puts ("hppa2.0n"); break;
+              		default: puts ("hppa2.0"); break;
+              		} break;
+              #else  /* !defined(_SC_KERNEL_BITS) */
+              	    puts ("hppa2.0"); break;
+              #endif
+              	default: puts ("hppa1.0"); break;
+              	}
+                  exit (0);
+              }
 EOF
 		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
 		    test -z "$HP_ARCH" && HP_ARCH=hppa
@@ -680,7 +640,7 @@ EOF
 	    # => hppa64-hp-hpux11.23
 
 	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
-		grep -q __LP64__
+		grep __LP64__ >/dev/null
 	    then
 		HP_ARCH="hppa2.0w"
 	    else
@@ -751,22 +711,22 @@ EOF
 	exit ;;
     C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
 	echo c1-convex-bsd
-	exit ;;
+        exit ;;
     C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
 	if getsysinfo -f scalar_acc
 	then echo c32-convex-bsd
 	else echo c2-convex-bsd
 	fi
-	exit ;;
+        exit ;;
     C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
 	echo c34-convex-bsd
-	exit ;;
+        exit ;;
     C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
 	echo c38-convex-bsd
-	exit ;;
+        exit ;;
     C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
 	echo c4-convex-bsd
-	exit ;;
+        exit ;;
     CRAY*Y-MP:*:*:*)
 	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
 	exit ;;
@@ -790,14 +750,14 @@ EOF
 	exit ;;
     F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
 	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-	FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
-	echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-	exit ;;
+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+        exit ;;
     5000:UNIX_System_V:4.*:*)
-	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-	FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
-	echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+        FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+        echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
 	exit ;;
     i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
 	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
@@ -809,39 +769,34 @@ EOF
 	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
 	exit ;;
     *:FreeBSD:*:*)
-	UNAME_PROCESSOR=`/usr/bin/uname -p`
-	case ${UNAME_PROCESSOR} in
+	case ${UNAME_MACHINE} in
+	    pc98)
+		echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
 	    amd64)
 		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
 	    *)
-		echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+		echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
 	esac
 	exit ;;
     i*:CYGWIN*:*)
 	echo ${UNAME_MACHINE}-pc-cygwin
 	exit ;;
-    *:MINGW64*:*)
-	echo ${UNAME_MACHINE}-pc-mingw64
-	exit ;;
     *:MINGW*:*)
 	echo ${UNAME_MACHINE}-pc-mingw32
 	exit ;;
-    i*:MSYS*:*)
-	echo ${UNAME_MACHINE}-pc-msys
-	exit ;;
     i*:windows32*:*)
-	# uname -m includes "-pc" on this system.
-	echo ${UNAME_MACHINE}-mingw32
+    	# uname -m includes "-pc" on this system.
+    	echo ${UNAME_MACHINE}-mingw32
 	exit ;;
     i*:PW*:*)
 	echo ${UNAME_MACHINE}-pc-pw32
 	exit ;;
-    *:Interix*:*)
-	case ${UNAME_MACHINE} in
+    *:Interix*:[3456]*)
+    	case ${UNAME_MACHINE} in
 	    x86)
 		echo i586-pc-interix${UNAME_RELEASE}
 		exit ;;
-	    authenticamd | genuineintel | EM64T)
+	    EM64T | authenticamd)
 		echo x86_64-unknown-interix${UNAME_RELEASE}
 		exit ;;
 	    IA64)
@@ -851,9 +806,6 @@ EOF
     [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
 	echo i${UNAME_MACHINE}-pc-mks
 	exit ;;
-    8664:Windows_NT:*)
-	echo x86_64-pc-mks
-	exit ;;
     i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
 	# How do we know it's Interix rather than the generic POSIX subsystem?
 	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
@@ -874,157 +826,210 @@ EOF
 	exit ;;
     *:GNU:*:*)
 	# the GNU system
-	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
 	exit ;;
     *:GNU/*:*:*)
 	# other systems with GNU libc and userland
-	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC}
+	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
 	exit ;;
     i*86:Minix:*:*)
 	echo ${UNAME_MACHINE}-pc-minix
 	exit ;;
-    aarch64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
-	exit ;;
-    aarch64_be:Linux:*:*)
-	UNAME_MACHINE=aarch64_be
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
-	exit ;;
-    alpha:Linux:*:*)
-	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
-	  EV5)   UNAME_MACHINE=alphaev5 ;;
-	  EV56)  UNAME_MACHINE=alphaev56 ;;
-	  PCA56) UNAME_MACHINE=alphapca56 ;;
-	  PCA57) UNAME_MACHINE=alphapca56 ;;
-	  EV6)   UNAME_MACHINE=alphaev6 ;;
-	  EV67)  UNAME_MACHINE=alphaev67 ;;
-	  EV68*) UNAME_MACHINE=alphaev68 ;;
-	esac
-	objdump --private-headers /bin/sh | grep -q ld.so.1
-	if test "$?" = 0 ; then LIBC="gnulibc1" ; fi
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
-	exit ;;
-    arc:Linux:*:* | arceb:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
-	exit ;;
     arm*:Linux:*:*)
 	eval $set_cc_for_build
 	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
 	    | grep -q __ARM_EABI__
 	then
-	    echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	    echo ${UNAME_MACHINE}-unknown-linux-gnu
 	else
-	    if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
-		| grep -q __ARM_PCS_VFP
-	    then
-		echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi
-	    else
-		echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf
-	    fi
+	    echo ${UNAME_MACHINE}-unknown-linux-gnueabi
 	fi
 	exit ;;
     avr32*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     cris:Linux:*:*)
-	echo ${UNAME_MACHINE}-axis-linux-${LIBC}
+	echo cris-axis-linux-gnu
 	exit ;;
     crisv32:Linux:*:*)
-	echo ${UNAME_MACHINE}-axis-linux-${LIBC}
+	echo crisv32-axis-linux-gnu
 	exit ;;
     frv:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
-	exit ;;
-    hexagon:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
-	exit ;;
-    i*86:Linux:*:*)
-	echo ${UNAME_MACHINE}-pc-linux-${LIBC}
+    	echo frv-unknown-linux-gnu
 	exit ;;
     ia64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     m32r*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     m68*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
-    mips:Linux:*:* | mips64:Linux:*:*)
+    mips:Linux:*:*)
 	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
 	#undef CPU
-	#undef ${UNAME_MACHINE}
-	#undef ${UNAME_MACHINE}el
+	#undef mips
+	#undef mipsel
 	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-	CPU=${UNAME_MACHINE}el
+	CPU=mipsel
 	#else
 	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-	CPU=${UNAME_MACHINE}
+	CPU=mips
 	#else
 	CPU=
 	#endif
 	#endif
 EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
-	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+	    /^CPU/{
+		s: ::g
+		p
+	    }'`"
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	;;
+    mips64:Linux:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#undef CPU
+	#undef mips64
+	#undef mips64el
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	CPU=mips64el
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	CPU=mips64
+	#else
+	CPU=
+	#endif
+	#endif
+EOF
+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+	    /^CPU/{
+		s: ::g
+		p
+	    }'`"
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
 	;;
-    or1k:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
-	exit ;;
     or32:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	echo or32-unknown-linux-gnu
 	exit ;;
-    padre:Linux:*:*)
-	echo sparc-unknown-linux-${LIBC}
+    ppc:Linux:*:*)
+	echo powerpc-unknown-linux-gnu
 	exit ;;
-    parisc64:Linux:*:* | hppa64:Linux:*:*)
-	echo hppa64-unknown-linux-${LIBC}
+    ppc64:Linux:*:*)
+	echo powerpc64-unknown-linux-gnu
+	exit ;;
+    alpha:Linux:*:*)
+	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+	  EV5)   UNAME_MACHINE=alphaev5 ;;
+	  EV56)  UNAME_MACHINE=alphaev56 ;;
+	  PCA56) UNAME_MACHINE=alphapca56 ;;
+	  PCA57) UNAME_MACHINE=alphapca56 ;;
+	  EV6)   UNAME_MACHINE=alphaev6 ;;
+	  EV67)  UNAME_MACHINE=alphaev67 ;;
+	  EV68*) UNAME_MACHINE=alphaev68 ;;
+        esac
+	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
+	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
 	exit ;;
     parisc:Linux:*:* | hppa:Linux:*:*)
 	# Look for CPU level
 	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
-	  PA7*) echo hppa1.1-unknown-linux-${LIBC} ;;
-	  PA8*) echo hppa2.0-unknown-linux-${LIBC} ;;
-	  *)    echo hppa-unknown-linux-${LIBC} ;;
+	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
+	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
+	  *)    echo hppa-unknown-linux-gnu ;;
 	esac
 	exit ;;
-    ppc64:Linux:*:*)
-	echo powerpc64-unknown-linux-${LIBC}
-	exit ;;
-    ppc:Linux:*:*)
-	echo powerpc-unknown-linux-${LIBC}
-	exit ;;
-    ppc64le:Linux:*:*)
-	echo powerpc64le-unknown-linux-${LIBC}
-	exit ;;
-    ppcle:Linux:*:*)
-	echo powerpcle-unknown-linux-${LIBC}
+    parisc64:Linux:*:* | hppa64:Linux:*:*)
+	echo hppa64-unknown-linux-gnu
 	exit ;;
     s390:Linux:*:* | s390x:Linux:*:*)
-	echo ${UNAME_MACHINE}-ibm-linux-${LIBC}
+	echo ${UNAME_MACHINE}-ibm-linux
 	exit ;;
     sh64*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+    	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     sh*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     sparc:Linux:*:* | sparc64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
-	exit ;;
-    tile*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     vax:Linux:*:*)
-	echo ${UNAME_MACHINE}-dec-linux-${LIBC}
+	echo ${UNAME_MACHINE}-dec-linux-gnu
 	exit ;;
     x86_64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	echo x86_64-unknown-linux-gnu
 	exit ;;
     xtensa*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+    	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
+    i*86:Linux:*:*)
+	# The BFD linker knows what the default object file format is, so
+	# first see if it will tell us. cd to the root directory to prevent
+	# problems with other programs or directories called `ld' in the path.
+	# Set LC_ALL=C to ensure ld outputs messages in English.
+	ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
+			 | sed -ne '/supported targets:/!d
+				    s/[ 	][ 	]*/ /g
+				    s/.*supported targets: *//
+				    s/ .*//
+				    p'`
+        case "$ld_supported_targets" in
+	  elf32-i386)
+		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
+		;;
+	  a.out-i386-linux)
+		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+		exit ;;
+	  coff-i386)
+		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+		exit ;;
+	  "")
+		# Either a pre-BFD a.out linker (linux-gnuoldld) or
+		# one that does not give us useful --help.
+		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
+		exit ;;
+	esac
+	# Determine whether the default compiler is a.out or elf
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#include <features.h>
+	#ifdef __ELF__
+	# ifdef __GLIBC__
+	#  if __GLIBC__ >= 2
+	LIBC=gnu
+	#  else
+	LIBC=gnulibc1
+	#  endif
+	# else
+	LIBC=gnulibc1
+	# endif
+	#else
+	#if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
+	LIBC=gnu
+	#else
+	LIBC=gnuaout
+	#endif
+	#endif
+	#ifdef __dietlibc__
+	LIBC=dietlibc
+	#endif
+EOF
+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+	    /^LIBC/{
+		s: ::g
+		p
+	    }'`"
+	test x"${LIBC}" != x && {
+		echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+		exit
+	}
+	test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
+	;;
     i*86:DYNIX/ptx:4*:*)
 	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
 	# earlier versions are messed up and put the nodename in both
@@ -1032,11 +1037,11 @@ EOF
 	echo i386-sequent-sysv4
 	exit ;;
     i*86:UNIX_SV:4.2MP:2.*)
-	# Unixware is an offshoot of SVR4, but it has its own version
-	# number series starting with 2...
-	# I am not positive that other SVR4 systems won't match this,
+        # Unixware is an offshoot of SVR4, but it has its own version
+        # number series starting with 2...
+        # I am not positive that other SVR4 systems won't match this,
 	# I just have to hope.  -- rms.
-	# Use sysv4.2uw... so that sysv4* matches it.
+        # Use sysv4.2uw... so that sysv4* matches it.
 	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
 	exit ;;
     i*86:OS/2:*:*)
@@ -1053,7 +1058,7 @@ EOF
     i*86:syllable:*:*)
 	echo ${UNAME_MACHINE}-pc-syllable
 	exit ;;
-    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
 	echo i386-unknown-lynxos${UNAME_RELEASE}
 	exit ;;
     i*86:*DOS:*:*)
@@ -1068,7 +1073,7 @@ EOF
 	fi
 	exit ;;
     i*86:*:5:[678]*)
-	# UnixWare 7.x, OpenUNIX and OpenServer 6.
+    	# UnixWare 7.x, OpenUNIX and OpenServer 6.
 	case `/bin/uname -X | grep "^Machine"` in
 	    *486*)	     UNAME_MACHINE=i486 ;;
 	    *Pentium)	     UNAME_MACHINE=i586 ;;
@@ -1096,13 +1101,10 @@ EOF
 	exit ;;
     pc:*:*:*)
 	# Left here for compatibility:
-	# uname -m prints for DJGPP always 'pc', but it prints nothing about
-	# the processor, so we play safe by assuming i586.
-	# Note: whatever this is, it MUST be the same as what config.sub
-	# prints for the "djgpp" host, or else GDB configury will decide that
-	# this is a cross-build.
-	echo i586-pc-msdosdjgpp
-	exit ;;
+        # uname -m prints for DJGPP always 'pc', but it prints nothing about
+        # the processor, so we play safe by assuming i386.
+	echo i386-pc-msdosdjgpp
+        exit ;;
     Intel:Mach:3*:*)
 	echo i386-pc-mach3
 	exit ;;
@@ -1137,18 +1139,8 @@ EOF
 	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
 	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
     3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
-	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	  && { echo i486-ncr-sysv4; exit; } ;;
-    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
-	OS_REL='.3'
-	test -r /etc/.relid \
-	    && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
-	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	    && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
-	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
-	/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
-	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+          && { echo i486-ncr-sysv4; exit; } ;;
     m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
 	echo m68k-unknown-lynxos${UNAME_RELEASE}
 	exit ;;
@@ -1161,7 +1153,7 @@ EOF
     rs6000:LynxOS:2.*:*)
 	echo rs6000-unknown-lynxos${UNAME_RELEASE}
 	exit ;;
-    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
 	echo powerpc-unknown-lynxos${UNAME_RELEASE}
 	exit ;;
     SM[BE]S:UNIX_SV:*:*)
@@ -1181,10 +1173,10 @@ EOF
 		echo ns32k-sni-sysv
 	fi
 	exit ;;
-    PENTIUM:*:4.0*:*)	# Unisys `ClearPath HMP IX 4000' SVR4/MP effort
-			# says <Richard.M.Bartel@ccMail.Census.GOV>
-	echo i586-unisys-sysv4
-	exit ;;
+    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+                      # says <Richard.M.Bartel@ccMail.Census.GOV>
+        echo i586-unisys-sysv4
+        exit ;;
     *:UNIX_System_V:4*:FTX*)
 	# From Gerald Hewes <hewes@openmarket.com>.
 	# How about differentiating between stratus architectures? -djm
@@ -1210,11 +1202,11 @@ EOF
 	exit ;;
     R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
 	if [ -d /usr/nec ]; then
-		echo mips-nec-sysv${UNAME_RELEASE}
+	        echo mips-nec-sysv${UNAME_RELEASE}
 	else
-		echo mips-unknown-sysv${UNAME_RELEASE}
+	        echo mips-unknown-sysv${UNAME_RELEASE}
 	fi
-	exit ;;
+        exit ;;
     BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
 	echo powerpc-be-beos
 	exit ;;
@@ -1227,9 +1219,6 @@ EOF
     BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
 	echo i586-pc-haiku
 	exit ;;
-    x86_64:Haiku:*:*)
-	echo x86_64-unknown-haiku
-	exit ;;
     SX-4:SUPER-UX:*:*)
 	echo sx4-nec-superux${UNAME_RELEASE}
 	exit ;;
@@ -1256,31 +1245,9 @@ EOF
 	exit ;;
     *:Darwin:*:*)
 	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
-	eval $set_cc_for_build
-	if test "$UNAME_PROCESSOR" = unknown ; then
-	    UNAME_PROCESSOR=powerpc
-	fi
-	if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then
-	    if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
-		if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
-		    (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
-		    grep IS_64BIT_ARCH >/dev/null
-		then
-		    case $UNAME_PROCESSOR in
-			i386) UNAME_PROCESSOR=x86_64 ;;
-			powerpc) UNAME_PROCESSOR=powerpc64 ;;
-		    esac
-		fi
-	    fi
-	elif test "$UNAME_PROCESSOR" = i386 ; then
-	    # Avoid executing cc on OS X 10.9, as it ships with a stub
-	    # that puts up a graphical alert prompting to install
-	    # developer tools.  Any system running Mac OS X 10.7 or
-	    # later (Darwin 11 and later) is required to have a 64-bit
-	    # processor. This is not true of the ARM version of Darwin
-	    # that Apple uses in portable devices.
-	    UNAME_PROCESSOR=x86_64
-	fi
+	case $UNAME_PROCESSOR in
+	    unknown) UNAME_PROCESSOR=powerpc ;;
+	esac
 	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
 	exit ;;
     *:procnto*:*:* | *:QNX:[0123456789]*:*)
@@ -1294,10 +1261,7 @@ EOF
     *:QNX:*:4*)
 	echo i386-pc-qnx
 	exit ;;
-    NEO-?:NONSTOP_KERNEL:*:*)
-	echo neo-tandem-nsk${UNAME_RELEASE}
-	exit ;;
-    NSE-*:NONSTOP_KERNEL:*:*)
+    NSE-?:NONSTOP_KERNEL:*:*)
 	echo nse-tandem-nsk${UNAME_RELEASE}
 	exit ;;
     NSR-?:NONSTOP_KERNEL:*:*)
@@ -1342,13 +1306,13 @@ EOF
 	echo pdp10-unknown-its
 	exit ;;
     SEI:*:*:SEIUX)
-	echo mips-sei-seiux${UNAME_RELEASE}
+        echo mips-sei-seiux${UNAME_RELEASE}
 	exit ;;
     *:DragonFly:*:*)
 	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
 	exit ;;
     *:*VMS:*:*)
-	UNAME_MACHINE=`(uname -p) 2>/dev/null`
+    	UNAME_MACHINE=`(uname -p) 2>/dev/null`
 	case "${UNAME_MACHINE}" in
 	    A*) echo alpha-dec-vms ; exit ;;
 	    I*) echo ia64-dec-vms ; exit ;;
@@ -1363,14 +1327,11 @@ EOF
     i*86:rdos:*:*)
 	echo ${UNAME_MACHINE}-pc-rdos
 	exit ;;
-    i*86:AROS:*:*)
-	echo ${UNAME_MACHINE}-pc-aros
-	exit ;;
-    x86_64:VMkernel:*:*)
-	echo ${UNAME_MACHINE}-unknown-esx
-	exit ;;
 esac
 
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
 eval $set_cc_for_build
 cat >$dummy.c <<EOF
 #ifdef _SEQUENT_
@@ -1388,11 +1349,11 @@ main ()
 #include <sys/param.h>
   printf ("m68k-sony-newsos%s\n",
 #ifdef NEWSOS4
-	"4"
+          "4"
 #else
-	""
+	  ""
 #endif
-	); exit (0);
+         ); exit (0);
 #endif
 #endif
 
diff --git a/readline/support/config.sub b/readline/support/config.sub
index 61cb4bc..d07267e 100755
--- a/readline/support/config.sub
+++ b/readline/support/config.sub
@@ -1,40 +1,44 @@
 #! /bin/sh
 # Configuration validation subroutine script.
-#   Copyright 1992-2013 Free Software Foundation, Inc.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 20098
+#   Free Software Foundation, Inc.
 
-timestamp='2013-10-01'
+timestamp='2008-03-26'
 
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine.  It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
 # (at your option) any later version.
 #
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, see <http://www.gnu.org/licenses/>.
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
 #
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that
-# program.  This Exception is an additional permission under section 7
-# of the GNU General Public License, version 3 ("GPLv3").
+# the same distribution terms that you use for the rest of that program.
 
 
-# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+# Please send patches to <config-patches@gnu.org>.  Submit a context
+# diff and a properly formatted ChangeLog entry.
 #
 # Configuration subroutine to validate and canonicalize a configuration type.
 # Supply the specified configuration type as an argument.
 # If it is invalid, we print an error message on stderr and exit with code 1.
 # Otherwise, we print the canonical config type on stdout and succeed.
 
-# You can get the latest version of this script from:
-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
-
 # This file is supposed to be the same for all GNU packages
 # and recognize all the CPU types, system types and aliases
 # that are meaningful with *any* GNU software.
@@ -68,7 +72,8 @@ Report bugs and patches to <config-patches@gnu.org>."
 version="\
 GNU config.sub ($timestamp)
 
-Copyright 1992-2013 Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006, 2007, 2008,2009 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -115,18 +120,12 @@ esac
 # Here we must recognize all the valid KERNEL-OS combinations.
 maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
-  nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
-  linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
-  knetbsd*-gnu* | netbsd*-gnu* | \
-  kopensolaris*-gnu* | \
+  nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
+  uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
   storm-chaos* | os2-emx* | rtmk-nova*)
     os=-$maybe_os
     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
     ;;
-  android-linux)
-    os=-linux-android
-    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
-    ;;
   *)
     basic_machine=`echo $1 | sed 's/-[^-]*$//'`
     if [ $basic_machine != $1 ]
@@ -149,13 +148,10 @@ case $os in
 	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
 	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
 	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple | -axis | -knuth | -cray | -microblaze*)
+	-apple | -axis | -knuth | -cray)
 		os=
 		basic_machine=$1
 		;;
-	-bluegene*)
-		os=-cnk
-		;;
 	-sim | -cisco | -oki | -wec | -winbond)
 		os=
 		basic_machine=$1
@@ -170,10 +166,10 @@ case $os in
 		os=-chorusos
 		basic_machine=$1
 		;;
-	-chorusrdb)
-		os=-chorusrdb
+ 	-chorusrdb)
+ 		os=-chorusrdb
 		basic_machine=$1
-		;;
+ 		;;
 	-hiux*)
 		os=-hiuxwe2
 		;;
@@ -218,12 +214,6 @@ case $os in
 	-isc*)
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
 		;;
-	-lynx*178)
-		os=-lynxos178
-		;;
-	-lynx*5)
-		os=-lynxos5
-		;;
 	-lynx*)
 		os=-lynxos
 		;;
@@ -248,28 +238,19 @@ case $basic_machine in
 	# Some are omitted here because they have special meanings below.
 	1750a | 580 \
 	| a29k \
-	| aarch64 | aarch64_be \
 	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
 	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
 	| am33_2.0 \
-	| arc | arceb \
-	| arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
-	| avr | avr32 \
-	| be32 | be64 \
+	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
 	| bfin \
-	| c4x | c8051 | clipper \
+	| c4x | clipper \
 	| d10v | d30v | dlx | dsp16xx \
-	| epiphany \
 	| fido | fr30 | frv \
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
-	| hexagon \
 	| i370 | i860 | i960 | ia64 \
 	| ip2k | iq2000 \
-	| k1om \
-	| le32 | le64 \
-	| lm32 \
 	| m32c | m32r | m32rle | m68000 | m68k | m88k \
-	| maxq | mb | microblaze | microblazeel | mcore | mep | metag \
+	| maxq | mb | microblaze | mcore | mep | metag \
 	| mips | mipsbe | mipseb | mipsel | mipsle \
 	| mips16 \
 	| mips64 | mips64el \
@@ -287,45 +268,31 @@ case $basic_machine in
 	| mipsisa64r2 | mipsisa64r2el \
 	| mipsisa64sb1 | mipsisa64sb1el \
 	| mipsisa64sr71k | mipsisa64sr71kel \
-	| mipsr5900 | mipsr5900el \
 	| mipstx39 | mipstx39el \
 	| mn10200 | mn10300 \
-	| moxie \
 	| mt \
 	| msp430 \
-	| nds32 | nds32le | nds32be \
-	| nios | nios2 | nios2eb | nios2el \
+	| nios | nios2 \
 	| ns16k | ns32k \
-	| open8 \
-	| or1k | or32 \
+	| or32 \
 	| pdp10 | pdp11 | pj | pjl \
-	| powerpc | powerpc64 | powerpc64le | powerpcle \
+	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
 	| pyramid \
-	| rl78 | rx \
 	| score \
-	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
 	| sh64 | sh64le \
 	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
 	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
-	| spu \
-	| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
-	| ubicom32 \
-	| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
+	| spu | strongarm \
+	| tahoe | thumb | tic4x | tic80 | tron \
+	| v850 | v850e \
 	| we32k \
-	| x86 | xc16x | xstormy16 | xtensa \
-	| z8k | z80)
+	| x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
+	| z8k)
 		basic_machine=$basic_machine-unknown
 		;;
-	c54x)
-		basic_machine=tic54x-unknown
-		;;
-	c55x)
-		basic_machine=tic55x-unknown
-		;;
-	c6x)
-		basic_machine=tic6x-unknown
-		;;
-	m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip)
+	m6811 | m68hc11 | m6812 | m68hc12)
+		# Motorola 68HC11/12.
 		basic_machine=$basic_machine-unknown
 		os=-none
 		;;
@@ -335,21 +302,6 @@ case $basic_machine in
 		basic_machine=mt-unknown
 		;;
 
-	strongarm | thumb | xscale)
-		basic_machine=arm-unknown
-		;;
-	xgate)
-		basic_machine=$basic_machine-unknown
-		os=-none
-		;;
-	xscaleeb)
-		basic_machine=armeb-unknown
-		;;
-
-	xscaleel)
-		basic_machine=armel-unknown
-		;;
-
 	# We use `pc' rather than `unknown'
 	# because (1) that's what they normally are, and
 	# (2) the word "unknown" tends to confuse beginning users.
@@ -364,31 +316,24 @@ case $basic_machine in
 	# Recognize the basic CPU types with company name.
 	580-* \
 	| a29k-* \
-	| aarch64-* | aarch64_be-* \
 	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
 	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
-	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
+	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
 	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
 	| avr-* | avr32-* \
-	| be32-* | be64-* \
 	| bfin-* | bs2000-* \
-	| c[123]* | c30-* | [cjt]90-* | c4x-* \
-	| c8051-* | clipper-* | craynv-* | cydra-* \
+	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
+	| clipper-* | craynv-* | cydra-* \
 	| d10v-* | d30v-* | dlx-* \
 	| elxsi-* \
 	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
 	| h8300-* | h8500-* \
 	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
-	| hexagon-* \
 	| i*86-* | i860-* | i960-* | ia64-* \
 	| ip2k-* | iq2000-* \
-	| k1om-* \
-	| le32-* | le64-* \
-	| lm32-* \
 	| m32c-* | m32r-* | m32rle-* \
 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
 	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
-	| microblaze-* | microblazeel-* \
 	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
 	| mips16-* \
 	| mips64-* | mips64el-* \
@@ -406,37 +351,31 @@ case $basic_machine in
 	| mipsisa64r2-* | mipsisa64r2el-* \
 	| mipsisa64sb1-* | mipsisa64sb1el-* \
 	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
-	| mipsr5900-* | mipsr5900el-* \
 	| mipstx39-* | mipstx39el-* \
 	| mmix-* \
 	| mt-* \
 	| msp430-* \
-	| nds32-* | nds32le-* | nds32be-* \
-	| nios-* | nios2-* | nios2eb-* | nios2el-* \
+	| nios-* | nios2-* \
 	| none-* | np1-* | ns16k-* | ns32k-* \
-	| open8-* \
 	| orion-* \
 	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
-	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
+	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
 	| pyramid-* \
-	| rl78-* | romp-* | rs6000-* | rx-* \
-	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+	| romp-* | rs6000-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
 	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
 	| sparclite-* \
-	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
-	| tahoe-* \
-	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
-	| tile*-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
+	| tahoe-* | thumb-* \
+	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \
 	| tron-* \
-	| ubicom32-* \
-	| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
-	| vax-* \
+	| v850-* | v850e-* | vax-* \
 	| we32k-* \
-	| x86-* | x86_64-* | xc16x-* | xps100-* \
+	| x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
 	| xstormy16-* | xtensa*-* \
 	| ymp-* \
-	| z8k-* | z80-*)
+	| z8k-*)
 		;;
 	# Recognize the basic CPU types without company name, with glob match.
 	xtensa*)
@@ -458,7 +397,7 @@ case $basic_machine in
 		basic_machine=a29k-amd
 		os=-udi
 		;;
-	abacus)
+    	abacus)
 		basic_machine=abacus-unknown
 		;;
 	adobe68k)
@@ -504,10 +443,6 @@ case $basic_machine in
 		basic_machine=m68k-apollo
 		os=-bsd
 		;;
-	aros)
-		basic_machine=i386-pc
-		os=-aros
-		;;
 	aux)
 		basic_machine=m68k-apple
 		os=-aux
@@ -524,27 +459,10 @@ case $basic_machine in
 		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
 		os=-linux
 		;;
-	bluegene*)
-		basic_machine=powerpc-ibm
-		os=-cnk
-		;;
-	c54x-*)
-		basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	c55x-*)
-		basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	c6x-*)
-		basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
 	c90)
 		basic_machine=c90-cray
 		os=-unicos
 		;;
-	cegcc)
-		basic_machine=arm-unknown
-		os=-cegcc
-		;;
 	convex-c1)
 		basic_machine=c1-convex
 		os=-bsd
@@ -573,7 +491,7 @@ case $basic_machine in
 		basic_machine=craynv-cray
 		os=-unicosmp
 		;;
-	cr16 | cr16-*)
+	cr16)
 		basic_machine=cr16-unknown
 		os=-elf
 		;;
@@ -612,10 +530,6 @@ case $basic_machine in
 		basic_machine=m88k-motorola
 		os=-sysv3
 		;;
-	dicos)
-		basic_machine=i686-pc
-		os=-dicos
-		;;
 	djgpp)
 		basic_machine=i586-pc
 		os=-msdosdjgpp
@@ -731,6 +645,7 @@ case $basic_machine in
 	i370-ibm* | ibm*)
 		basic_machine=i370-ibm
 		;;
+# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
 	i*86v32)
 		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
 		os=-sysv32
@@ -788,15 +703,8 @@ case $basic_machine in
 		basic_machine=ns32k-utek
 		os=-sysv
 		;;
-	microblaze*)
-		basic_machine=microblaze-xilinx
-		;;
-	mingw64)
-		basic_machine=x86_64-pc
-		os=-mingw64
-		;;
 	mingw32)
-		basic_machine=i686-pc
+		basic_machine=i386-pc
 		os=-mingw32
 		;;
 	mingw32ce)
@@ -831,18 +739,10 @@ case $basic_machine in
 	ms1-*)
 		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
 		;;
-	msys)
-		basic_machine=i686-pc
-		os=-msys
-		;;
 	mvs)
 		basic_machine=i370-ibm
 		os=-mvs
 		;;
-	nacl)
-		basic_machine=le32-unknown
-		os=-nacl
-		;;
 	ncr3000)
 		basic_machine=i486-ncr
 		os=-sysv4
@@ -907,9 +807,6 @@ case $basic_machine in
 	np1)
 		basic_machine=np1-gould
 		;;
-	neo-tandem)
-		basic_machine=neo-tandem
-		;;
 	nse-tandem)
 		basic_machine=nse-tandem
 		;;
@@ -995,10 +892,9 @@ case $basic_machine in
 		;;
 	power)	basic_machine=power-ibm
 		;;
-	ppc | ppcbe)	basic_machine=powerpc-unknown
+	ppc)	basic_machine=powerpc-unknown
 		;;
-	ppc-* | ppcbe-*)
-		basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
 	ppcle | powerpclittle | ppc-le | powerpc-little)
 		basic_machine=powerpcle-unknown
@@ -1023,11 +919,7 @@ case $basic_machine in
 		basic_machine=i586-unknown
 		os=-pw32
 		;;
-	rdos | rdos64)
-		basic_machine=x86_64-pc
-		os=-rdos
-		;;
-	rdos32)
+	rdos)
 		basic_machine=i386-pc
 		os=-rdos
 		;;
@@ -1096,9 +988,6 @@ case $basic_machine in
 		basic_machine=i860-stratus
 		os=-sysv4
 		;;
-	strongarm-* | thumb-*)
-		basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
 	sun2)
 		basic_machine=m68000-sun
 		;;
@@ -1155,8 +1044,20 @@ case $basic_machine in
 		basic_machine=t90-cray
 		os=-unicos
 		;;
+	tic54x | c54x*)
+		basic_machine=tic54x-unknown
+		os=-coff
+		;;
+	tic55x | c55x*)
+		basic_machine=tic55x-unknown
+		os=-coff
+		;;
+	tic6x | c6x*)
+		basic_machine=tic6x-unknown
+		os=-coff
+		;;
 	tile*)
-		basic_machine=$basic_machine-unknown
+		basic_machine=tile-unknown
 		os=-linux-gnu
 		;;
 	tx39)
@@ -1226,9 +1127,6 @@ case $basic_machine in
 	xps | xps100)
 		basic_machine=xps100-honeywell
 		;;
-	xscale-* | xscalee[bl]-*)
-		basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
-		;;
 	ymp)
 		basic_machine=ymp-cray
 		os=-unicos
@@ -1237,10 +1135,6 @@ case $basic_machine in
 		basic_machine=z8k-unknown
 		os=-sim
 		;;
-	z80-*-coff)
-		basic_machine=z80-unknown
-		os=-sim
-		;;
 	none)
 		basic_machine=none-none
 		os=-none
@@ -1279,7 +1173,7 @@ case $basic_machine in
 	we32k)
 		basic_machine=we32k-att
 		;;
-	sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
+	sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
 		basic_machine=sh-unknown
 		;;
 	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
@@ -1326,12 +1220,9 @@ esac
 if [ x"$os" != x"" ]
 then
 case $os in
-	# First match some system type aliases
-	# that might get confused with valid system types.
+        # First match some system type aliases
+        # that might get confused with valid system types.
 	# -solaris* is a basic system type, with this one exception.
-	-auroraux)
-		os=-auroraux
-		;;
 	-solaris1 | -solaris1.*)
 		os=`echo $os | sed -e 's|solaris1|sunos4|'`
 		;;
@@ -1352,23 +1243,21 @@ case $os in
 	# Each alternative MUST END IN A *, to match a version number.
 	# -sysv* is not here because it comes later, after sysvr4.
 	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
-	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
-	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
-	      | -sym* | -kopensolaris* | -plan9* \
+	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
+	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
 	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
-	      | -aos* | -aros* \
+	      | -aos* \
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
 	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
-	      | -bitrig* | -openbsd* | -solidbsd* \
+	      | -openbsd* | -solidbsd* \
 	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
 	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
-	      | -chorusos* | -chorusrdb* | -cegcc* \
-	      | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
-	      | -linux-newlib* | -linux-musl* | -linux-uclibc* \
+	      | -chorusos* | -chorusrdb* \
+	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+	      | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
 	      | -uxpv* | -beos* | -mpeix* | -udk* \
 	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
@@ -1376,7 +1265,7 @@ case $os in
 	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
 	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
 	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
-	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)
@@ -1415,7 +1304,7 @@ case $os in
 	-opened*)
 		os=-openedition
 		;;
-	-os400*)
+        -os400*)
 		os=-os400
 		;;
 	-wince*)
@@ -1464,7 +1353,7 @@ case $os in
 	-sinix*)
 		os=-sysv4
 		;;
-	-tpf*)
+        -tpf*)
 		os=-tpf
 		;;
 	-triton*)
@@ -1500,14 +1389,12 @@ case $os in
 	-aros*)
 		os=-aros
 		;;
+	-kaos*)
+		os=-kaos
+		;;
 	-zvmoe)
 		os=-zvmoe
 		;;
-	-dicos*)
-		os=-dicos
-		;;
-	-nacl*)
-		;;
 	-none)
 		;;
 	*)
@@ -1530,10 +1417,10 @@ else
 # system, and we'll never get to this point.
 
 case $basic_machine in
-	score-*)
+        score-*)
 		os=-elf
 		;;
-	spu-*)
+        spu-*)
 		os=-elf
 		;;
 	*-acorn)
@@ -1545,23 +1432,8 @@ case $basic_machine in
 	arm*-semi)
 		os=-aout
 		;;
-	c4x-* | tic4x-*)
-		os=-coff
-		;;
-	c8051-*)
-		os=-elf
-		;;
-	hexagon-*)
-		os=-elf
-		;;
-	tic54x-*)
-		os=-coff
-		;;
-	tic55x-*)
-		os=-coff
-		;;
-	tic6x-*)
-		os=-coff
+        c4x-* | tic4x-*)
+        	os=-coff
 		;;
 	# This must come before the *-dec entry.
 	pdp10-*)
@@ -1581,11 +1453,14 @@ case $basic_machine in
 		;;
 	m68000-sun)
 		os=-sunos3
+		# This also exists in the configure program, but was not the
+		# default.
+		# os=-sunos4
 		;;
 	m68*-cisco)
 		os=-aout
 		;;
-	mep-*)
+        mep-*)
 		os=-elf
 		;;
 	mips*-cisco)
@@ -1594,9 +1469,6 @@ case $basic_machine in
 	mips*-*)
 		os=-elf
 		;;
-	or1k-*)
-		os=-elf
-		;;
 	or32-*)
 		os=-coff
 		;;
@@ -1615,7 +1487,7 @@ case $basic_machine in
 	*-ibm)
 		os=-aix
 		;;
-	*-knuth)
+    	*-knuth)
 		os=-mmixware
 		;;
 	*-wec)
@@ -1720,7 +1592,7 @@ case $basic_machine in
 			-sunos*)
 				vendor=sun
 				;;
-			-cnk*|-aix*)
+			-aix*)
 				vendor=ibm
 				;;
 			-beos*)
diff --git a/readline/support/mkdist b/readline/support/mkdist
index 282431d..ff38764 100755
--- a/readline/support/mkdist
+++ b/readline/support/mkdist
@@ -2,7 +2,7 @@
 #
 # mkdist - make a distribution directory from a master manifest file
 #
-# usage: mkdist [-m manifest] [-s srcdir] [-r rootname] [-t] [-v] version
+# usage: mkdist [-m manifest] [-s srcdir] [-r rootname] [-v] version
 #
 # SRCDIR defaults to src
 # MANIFEST defaults to $SRCDIR/MANIFEST
@@ -31,7 +31,7 @@ ROOTNAME=bash
 
 usage()
 {
-	echo usage: mkdist [-m manifest] [-s srcdir] [-r rootname] [-t] [-v] version 1>&2
+	echo usage: mkdist [-m manifest] [-s srcdir] [-r rootname] [-v] version 1>&2
 	exit 2
 }
 
@@ -42,13 +42,12 @@ vmsg()
 	fi
 }
 
-while getopts m:s:r:tv name
+while getopts m:s:r:v name
 do
 	case $name in
 	m)	MANIFEST=$OPTARG ;;
 	s)	SRCDIR=$OPTARG ;;
 	r)	ROOTNAME=$OPTARG ;;
-	t)	maketar=yes ;;
 	v)	verbose=yes ;;
 	?)	usage ;;
 	esac
@@ -67,8 +66,6 @@ fi
 version=$1
 newdir=${ROOTNAME}-$version
 
-tarfile=${newdir}.tar
-
 vmsg creating distribution for $ROOTNAME version $version in $newdir
 
 if [ ! -d $newdir ]; then
@@ -120,10 +117,4 @@ done < $MANIFEST
 
 vmsg $newdir created
 
-if [ -n "$maketar" ]; then
-	tar cf ${tarfile} $newdir
-	gzip $tarfile
-	vmsg ${tarfile}.gz created
-fi
-
 exit 0
diff --git a/readline/support/shlib-install b/readline/support/shlib-install
index cfec3bd..3d0fb3c 100755
--- a/readline/support/shlib-install
+++ b/readline/support/shlib-install
@@ -66,12 +66,11 @@ fi
 # post-install/uninstall
 
 # HP-UX and Darwin/MacOS X require that a shared library have execute permission
-# Linux does, too, and ldd warns about it.  Solaris doesn't seem to mind,
-# but ldd still warns about it.
+# Linux does, too, and ldd warns about it
 # Cygwin installs both a dll (which must go in $BINDIR) and an implicit
 # link library (in $libdir)
 case "$host_os" in
-hpux*|darwin*|macosx*|linux*|solaris2*)
+hpux*|darwin*|macosx*|linux*)
 	if [ -z "$uninstall" ]; then
 		chmod 555 ${INSTALLDIR}/${LIBNAME}
 	fi ;;
@@ -132,7 +131,7 @@ case "$host_os-$host_vendor" in
 	fi
 	;;
 
-bsdi4*|*gnu*|darwin*|macosx*|netbsd*|mirbsd*)
+bsdi4*|*gnu*|darwin*|macosx*|netbsd*)
 	# libname.so.M -> libname.so.M.N
 	${echo} ${RM} ${INSTALLDIR}/$LINK2
 	if [ -z "$uninstall" ]; then
@@ -178,7 +177,7 @@ freebsd3*|freebsdaout*)
 	fi
 	;;
 
-freebsd[4-9]*|freebsd1[0-9]*|freebsdelf*|dragonfly*)
+freebsd[4-9]*|freebsdelf*|dragonfly*)
 	# libname.so -> libname.so.M
 	${echo} ${RM} ${INSTALLDIR}/$LINK1
 	if [ -z "$uninstall" ]; then
diff --git a/readline/support/shobj-conf b/readline/support/shobj-conf
index 1f64433..5a63e80 100755
--- a/readline/support/shobj-conf
+++ b/readline/support/shobj-conf
@@ -10,7 +10,7 @@
 # Chet Ramey
 # chet@po.cwru.edu
 
-#   Copyright (C) 1996-2014 Free Software Foundation, Inc.
+#   Copyright (C) 1996-2009 Free Software Foundation, Inc.
 #
 #   This file is part of GNU Bash, the Bourne Again SHell.
 #
@@ -65,20 +65,6 @@ while [ $# -gt 0 ]; do
 done
 
 case "${host_os}-${SHOBJ_CC}-${host_vendor}" in
-nsk-cc-tandem)
-	SHOBJ_CFLAGS=-Wglobalized
-	case `uname -m` in
-	NSR*)
-		SHOBJ_CFLAGS="${SHOBJ_CFLAGS} -Wcall_shared" # default on TNS/E, needed on TNS/R
-		SHOBJ_LD=/usr/bin/ld # for TNS/R
-		;;
-	NSE*|NEO*)
-		SHOBJ_LD=/usr/bin/eld
-		;;
-	esac
-	SHOBJ_LDFLAGS='-shared -bglobalized -unres_symbols ignore'
-	;;
-
 sunos4*-*gcc*)
 	SHOBJ_CFLAGS=-fpic
 	SHOBJ_LD=/usr/bin/ld
@@ -160,7 +146,7 @@ freebsd3*|freebsdaout*)
 	;;
 
 # FreeBSD-4.x and later have only ELF
-freebsd[4-9]*|freebsd1[0-9]*|freebsdelf*|dragonfly*)
+freebsd[4-9]*|freebsdelf*|dragonfly*)
 	SHOBJ_CFLAGS=-fPIC
 	SHOBJ_LD='${CC}'
 
@@ -171,48 +157,47 @@ freebsd[4-9]*|freebsd1[0-9]*|freebsdelf*|dragonfly*)
 	;;
 
 # Darwin/MacOS X
-darwin*)
-	# Common definitions for all darwin/mac os x versions
+darwin[89]*|darwin10*)
+	SHOBJ_STATUS=supported
+	SHLIB_STATUS=supported
+	
 	SHOBJ_CFLAGS='-fno-common'
 
-	SHOBJ_LD='${CC}'
+	SHOBJ_LD='MACOSX_DEPLOYMENT_TARGET=10.3 ${CC}'
 
 	SHLIB_LIBVERSION='$(SHLIB_MAJOR)$(SHLIB_MINOR).$(SHLIB_LIBSUFF)'
 	SHLIB_LIBSUFF='dylib'
 
-	# unused at this time
-	SHLIB_SONAME='$(libdir)/`echo $@ | sed "s:\\..*::"`.$(SHLIB_MAJOR).$(SHLIB_LIBSUFF)'
+	SHOBJ_LDFLAGS='-dynamiclib -dynamic -undefined dynamic_lookup -arch_only `/usr/bin/arch`'
+	SHLIB_XLDFLAGS='-dynamiclib -arch_only `/usr/bin/arch` -install_name $(libdir)/$@ -current_version $(SHLIB_MAJOR)$(SHLIB_MINOR) -compatibility_version $(SHLIB_MAJOR) -v'
+
+	SHLIB_LIBS='-lncurses'	# see if -lcurses works on MacOS X 10.1 
+	;;
+
+darwin*|macosx*)
+	SHOBJ_STATUS=unsupported
+	SHLIB_STATUS=supported
+
+	SHOBJ_CFLAGS='-fno-common'
+
+	SHOBJ_LD='${CC}'
+
+	SHLIB_LIBVERSION='$(SHLIB_MAJOR)$(SHLIB_MINOR).$(SHLIB_LIBSUFF)'
+	SHLIB_LIBSUFF='dylib'
 
 	case "${host_os}" in
-	# Darwin versions 1, 5, 6, 7 correspond to Mac OS X 10.0, 10.1, 10.2,
-	# and 10.3, respectively.
-	darwin[1-7].*)
-		SHOBJ_STATUS=unsupported
-		SHOBJ_LDFLAGS='-dynamic'
-		SHLIB_XLDFLAGS='-arch_only `/usr/bin/arch` -install_name $(libdir)/`echo $@ | sed "s:\\..*::"`.$(SHLIB_MAJOR).$(SHLIB_LIBSUFF) -current_version $(SHLIB_MAJOR)$(SHLIB_MINOR) -compatibility_version $(SHLIB_MAJOR) -v'
-		;;
-	# Darwin 8 == Mac OS X 10.4; Mac OS X 10.N == Darwin N+4
-	*)
-		case "${host_os}" in
-		darwin[89]*|darwin1[012]*)
-			SHOBJ_ARCHFLAGS='-arch_only `/usr/bin/arch`'
+	darwin[789]*|darwin10*)	SHOBJ_LDFLAGS=''
+			SHLIB_XLDFLAGS='-dynamiclib -arch_only `/usr/bin/arch` -install_name $(libdir)/$@ -current_version $(SHLIB_MAJOR)$(SHLIB_MINOR) -compatibility_version $(SHLIB_MAJOR) -v'
 			;;
-		 *) 	# Mac OS X 10.9 (Mavericks) and later
-			SHOBJ_ARCHFLAGS=
-			# for 32 and 64bit universal library
-			#SHOBJ_ARCHFLAGS='-arch i386 -arch x86_64'
-			#SHOBJ_CFLAGS=${SHOBJ_CFLAGS}' -arch i386 -arch x86_64'
+	*)		SHOBJ_LDFLAGS='-dynamic'
+			SHLIB_XLDFLAGS='-arch_only `/usr/bin/arch` -install_name $(libdir)/$@ -current_version $(SHLIB_MAJOR)$(SHLIB_MINOR) -compatibility_version $(SHLIB_MAJOR) -v'
 			;;
-		 esac
-		 SHOBJ_LDFLAGS="-dynamiclib -dynamic -undefined dynamic_lookup ${SHOBJ_ARCHFLAGS}"
-		 SHLIB_XLDFLAGS="-dynamiclib ${SHOBJ_ARCHFLAGS}"' -install_name $(libdir)/`echo $@ | sed "s:\\..*::"`.$(SHLIB_MAJOR).$(SHLIB_LIBSUFF) -current_version $(SHLIB_MAJOR)$(SHLIB_MINOR) -compatibility_version $(SHLIB_MAJOR) -v'
-		;;
 	esac
 
 	SHLIB_LIBS='-lncurses'	# see if -lcurses works on MacOS X 10.1 
 	;;
 
-openbsd*|netbsd*|mirbsd*)
+openbsd*|netbsd*)
 	SHOBJ_CFLAGS=-fPIC
 	SHOBJ_LD='${CC}'
 	SHOBJ_LDFLAGS='-shared'
-- 
cgit v1.1