From 8ae854217c1ce26c568d0a210b9981ea9de9051f Mon Sep 17 00:00:00 2001 From: Alan Modra Date: Fri, 17 Sep 2004 06:13:39 +0000 Subject: * Makefile.am: Run "make dep-am". * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate. * po/opcodes.pot: Regenerate. --- opcodes/ChangeLog | 9 + opcodes/Makefile.am | 10 +- opcodes/Makefile.in | 1003 ++++++++++++++++--------- opcodes/aclocal.m4 | 1950 ++++++++++++++++++++++++------------------------ opcodes/configure | 856 +++++++++++++++++---- opcodes/po/POTFILES.in | 2 + opcodes/po/opcodes.pot | 104 +-- 7 files changed, 2409 insertions(+), 1525 deletions(-) (limited to 'opcodes') diff --git a/opcodes/ChangeLog b/opcodes/ChangeLog index 6405e9f..802c78b 100644 --- a/opcodes/ChangeLog +++ b/opcodes/ChangeLog @@ -1,3 +1,12 @@ +2004-09-17 Alan Modra + + * Makefile.am: Run "make dep-am". + * Makefile.in: Regenerate. + * aclocal.m4: Regenerate. + * configure: Regenerate. + * po/POTFILES.in: Regenerate. + * po/opcodes.pot: Regenerate. + 2004-09-11 Andreas Schwab * configure: Rebuild. diff --git a/opcodes/Makefile.am b/opcodes/Makefile.am index 5c28971..a68632d 100644 --- a/opcodes/Makefile.am +++ b/opcodes/Makefile.am @@ -552,9 +552,11 @@ cris-dis.lo: cris-dis.c $(INCDIR)/dis-asm.h $(BFD_H) \ $(INCDIR)/ansidecl.h $(INCDIR)/symcat.h sysdep.h config.h \ $(INCDIR)/opcode/cris.h $(INCDIR)/libiberty.h cris-opc.lo: cris-opc.c $(INCDIR)/opcode/cris.h -crx-dis.lo: crx-dis.c $(INCDIR)/opcode/crx.h \ - $(INCDIR)/dis-asm.h sysdep.h $(INCDIR)/ansidecl.h -crx-opc.lo: crx-opc.c $(INCDIR)/opcode/crx.h +crx-dis.lo: crx-dis.c $(INCDIR)/dis-asm.h $(BFD_H) \ + $(INCDIR)/ansidecl.h $(INCDIR)/symcat.h sysdep.h config.h \ + $(INCDIR)/opcode/crx.h +crx-opc.lo: crx-opc.c $(INCDIR)/libiberty.h $(INCDIR)/ansidecl.h \ + $(INCDIR)/symcat.h $(INCDIR)/opcode/crx.h d10v-dis.lo: d10v-dis.c sysdep.h config.h $(INCDIR)/ansidecl.h \ $(INCDIR)/opcode/d10v.h $(INCDIR)/dis-asm.h $(BFD_H) \ $(INCDIR)/symcat.h @@ -789,7 +791,7 @@ s390-dis.lo: s390-dis.c $(INCDIR)/ansidecl.h sysdep.h \ config.h $(INCDIR)/dis-asm.h $(BFD_H) $(INCDIR)/symcat.h \ $(INCDIR)/opcode/s390.h sh-dis.lo: sh-dis.c sysdep.h config.h $(INCDIR)/ansidecl.h \ - sh-opc.h $(INCDIR)/dis-asm.h $(BFD_H) $(INCDIR)/symcat.h + sh-opc.h $(BFD_H) $(INCDIR)/symcat.h $(INCDIR)/dis-asm.h sh64-dis.lo: sh64-dis.c $(INCDIR)/dis-asm.h $(BFD_H) \ $(INCDIR)/ansidecl.h $(INCDIR)/symcat.h sysdep.h config.h \ sh64-opc.h $(INCDIR)/libiberty.h $(BFDDIR)/elf-bfd.h \ diff --git a/opcodes/Makefile.in b/opcodes/Makefile.in index 9acfc0b..f9fa0df 100644 --- a/opcodes/Makefile.in +++ b/opcodes/Makefile.in @@ -1,6 +1,8 @@ -# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am +# Makefile.in generated by automake 1.9.1 from Makefile.am. +# @configure_input@ -# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -10,130 +12,229 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. +@SET_MAKE@ -SHELL = @SHELL@ + +SOURCES = libopcodes.c $(libopcodes_la_SOURCES) srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ -prefix = @prefix@ -exec_prefix = @exec_prefix@ - -bindir = @bindir@ -sbindir = @sbindir@ -libexecdir = @libexecdir@ -datadir = @datadir@ -sysconfdir = @sysconfdir@ -sharedstatedir = @sharedstatedir@ -localstatedir = @localstatedir@ -libdir = @libdir@ -infodir = @infodir@ -mandir = @mandir@ -includedir = @includedir@ -oldincludedir = /usr/include - -DESTDIR = - pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ - top_builddir = . - -ACLOCAL = @ACLOCAL@ -AUTOCONF = @AUTOCONF@ -AUTOMAKE = @AUTOMAKE@ -AUTOHEADER = @AUTOHEADER@ - +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -transform = @program_transform_name@ - +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : -host_alias = @host_alias@ +build_triplet = @build@ host_triplet = @host@ +target_triplet = @target@ +DIST_COMMON = $(srcdir)/../config.guess $(srcdir)/../config.sub \ + ChangeLog $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ + $(top_srcdir)/configure $(am__configure_deps) \ + $(srcdir)/config.in $(srcdir)/../mkinstalldirs \ + $(top_srcdir)/po/Make-in $(srcdir)/../ltmain.sh \ + $(srcdir)/../config.guess $(srcdir)/../config.sub +subdir = . +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/../bfd/acinclude.m4 \ + $(top_srcdir)/../config/accross.m4 \ + $(top_srcdir)/../config/acx.m4 $(top_srcdir)/../libtool.m4 \ + $(top_srcdir)/../gettext.m4 $(top_srcdir)/configure.in +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno configure.status.lineno +mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs +CONFIG_HEADER = config.h +CONFIG_CLEAN_FILES = po/Makefile.in +LIBRARIES = $(noinst_LIBRARIES) +ARFLAGS = cru +libopcodes_a_AR = $(AR) $(ARFLAGS) +libopcodes_a_LIBADD = +libopcodes_a_SOURCES = libopcodes.c +libopcodes_a_OBJECTS = libopcodes.$(OBJEXT) +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +am__installdirs = "$(DESTDIR)$(bfdlibdir)" +bfdlibLTLIBRARIES_INSTALL = $(INSTALL) +LTLIBRARIES = $(bfdlib_LTLIBRARIES) +am__DEPENDENCIES_1 = +am_libopcodes_la_OBJECTS = dis-buf.lo disassemble.lo dis-init.lo +libopcodes_la_OBJECTS = $(am_libopcodes_la_OBJECTS) +DEFAULT_INCLUDES = -I. -I$(srcdir) -I. +depcomp = +am__depfiles_maybe = +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \ + $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(CFLAGS) +CCLD = $(CC) +LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +SOURCES = libopcodes.c $(libopcodes_la_SOURCES) +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-exec-recursive install-info-recursive \ + install-recursive installcheck-recursive installdirs-recursive \ + pdf-recursive ps-recursive uninstall-info-recursive \ + uninstall-recursive +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) +ACLOCAL = @ACLOCAL@ +ALLOCA = @ALLOCA@ +AMDEP_FALSE = @AMDEP_FALSE@ +AMDEP_TRUE = @AMDEP_TRUE@ +AMTAR = @AMTAR@ AR = @AR@ -AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ BFD_MACHINES = @BFD_MACHINES@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ +CCDEPMODE = @CCDEPMODE@ CC_FOR_BUILD = @CC_FOR_BUILD@ +CFLAGS = @CFLAGS@ +CGEN_MAINT_FALSE = @CGEN_MAINT_FALSE@ +CGEN_MAINT_TRUE = @CGEN_MAINT_TRUE@ CPP = @CPP@ -CXX = @CXX@ -CXXCPP = @CXXCPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ -DLLTOOL = @DLLTOOL@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ EXEEXT = @EXEEXT@ EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@ -GCJ = @GCJ@ -GCJFLAGS = @GCJFLAGS@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ -GNATBIND = @GNATBIND@ GT_NO = @GT_NO@ GT_YES = @GT_YES@ -HAVE_LIB = @HAVE_LIB@ HDEFINES = @HDEFINES@ INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_LIBBFD_FALSE = @INSTALL_LIBBFD_FALSE@ +INSTALL_LIBBFD_TRUE = @INSTALL_LIBBFD_TRUE@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLDEPS = @INTLDEPS@ INTLLIBS = @INTLLIBS@ INTLOBJS = @INTLOBJS@ -LIB = @LIB@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ -LN = @LN@ LN_S = @LN_S@ -LTLIB = @LTLIB@ +LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ +MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ +MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ MAKEINFO = @MAKEINFO@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ -OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ POFILES = @POFILES@ POSUB = @POSUB@ RANLIB = @RANLIB@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ STRIP = @STRIP@ USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ +WARN_CFLAGS = @WARN_CFLAGS@ WIN32LDFLAGS = @WIN32LDFLAGS@ WIN32LIBADD = @WIN32LIBADD@ +XGETTEXT = @XGETTEXT@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_RANLIB = @ac_ct_RANLIB@ +ac_ct_STRIP = @ac_ct_STRIP@ +am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ +am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ archdefs = @archdefs@ -build_noncanonical = @build_noncanonical@ -build_subdir = @build_subdir@ +bfdincludedir = @bfdincludedir@ +bfdlibdir = @bfdlibdir@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ cgendir = @cgendir@ -do_compare = @do_compare@ +datadir = @datadir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ host_noncanonical = @host_noncanonical@ -host_subdir = @host_subdir@ +host_os = @host_os@ +host_vendor = @host_vendor@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ l = @l@ -ncn_cv_ = @ncn_cv_@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +sysconfdir = @sysconfdir@ +target = @target@ +target_alias = @target_alias@ +target_cpu = @target_cpu@ target_noncanonical = @target_noncanonical@ -target_subdir = @target_subdir@ - +target_os = @target_os@ +target_vendor = @target_vendor@ AUTOMAKE_OPTIONS = cygnus - SUBDIRS = po - INCDIR = $(srcdir)/../include BFDDIR = $(srcdir)/../bfd MKDEP = gcc -MM - -WARN_CFLAGS = @WARN_CFLAGS@ AM_CFLAGS = $(WARN_CFLAGS) - -bfdlibdir = @bfdlibdir@ -bfdincludedir = @bfdincludedir@ - bfdlib_LTLIBRARIES = libopcodes.la # This is where bfd.h lives. @@ -143,20 +244,265 @@ BFD_H = ../bfd/bfd.h LIBIBERTY = ../libiberty/libiberty.a # Header files. -HFILES = arm-opc.h fr30-desc.h fr30-opc.h frv-desc.h frv-opc.h h8500-opc.h ia64-asmtab.h ia64-opc.h ip2k-desc.h ip2k-opc.h iq2000-desc.h iq2000-opc.h m32r-desc.h m32r-opc.h mcore-opc.h openrisc-desc.h openrisc-opc.h sh-opc.h sh64-opc.h sysdep.h w65-opc.h xstormy16-desc.h xstormy16-opc.h z8k-opc.h +HFILES = \ + arm-opc.h \ + fr30-desc.h fr30-opc.h \ + frv-desc.h frv-opc.h \ + h8500-opc.h \ + ia64-asmtab.h \ + ia64-opc.h \ + ip2k-desc.h ip2k-opc.h \ + iq2000-desc.h iq2000-opc.h \ + m32r-desc.h m32r-opc.h \ + mcore-opc.h \ + openrisc-desc.h openrisc-opc.h \ + sh-opc.h \ + sh64-opc.h \ + sysdep.h \ + w65-opc.h \ + xstormy16-desc.h xstormy16-opc.h \ + z8k-opc.h # C source files that correspond to .o's. -CFILES = a29k-dis.c alpha-dis.c alpha-opc.c arc-dis.c arc-opc.c arc-ext.c arm-dis.c avr-dis.c cgen-asm.c cgen-dis.c cgen-opc.c cris-dis.c cris-opc.c crx-dis.c crx-opc.c d10v-dis.c d10v-opc.c d30v-dis.c d30v-opc.c dlx-dis.c dis-buf.c dis-init.c disassemble.c fr30-asm.c fr30-desc.c fr30-dis.c fr30-ibld.c fr30-opc.c frv-asm.c frv-desc.c frv-dis.c frv-ibld.c frv-opc.c h8300-dis.c h8500-dis.c hppa-dis.c i370-dis.c i370-opc.c i386-dis.c i860-dis.c i960-dis.c ia64-dis.c ia64-opc-a.c ia64-opc-b.c ia64-opc-f.c ia64-opc-i.c ia64-opc-m.c ia64-opc-d.c ia64-opc.c ia64-gen.c ia64-asmtab.c ip2k-asm.c ip2k-desc.c ip2k-dis.c ip2k-ibld.c ip2k-opc.c iq2000-asm.c iq2000-desc.c iq2000-dis.c iq2000-ibld.c iq2000-opc.c m32r-asm.c m32r-desc.c m32r-dis.c m32r-ibld.c m32r-opc.c m32r-opinst.c m68hc11-dis.c m68hc11-opc.c m68k-dis.c m68k-opc.c m88k-dis.c mcore-dis.c mips-dis.c mips-opc.c mips16-opc.c m10200-dis.c m10200-opc.c m10300-dis.c m10300-opc.c mmix-dis.c mmix-opc.c ns32k-dis.c openrisc-asm.c openrisc-desc.c openrisc-dis.c openrisc-ibld.c openrisc-opc.c or32-dis.c or32-opc.c pdp11-dis.c pdp11-opc.c pj-dis.c pj-opc.c ppc-dis.c ppc-opc.c s390-mkopc.c s390-opc.c s390-dis.c sh-dis.c sh64-dis.c sh64-opc.c sparc-dis.c sparc-opc.c tic30-dis.c tic4x-dis.c tic54x-dis.c tic54x-opc.c tic80-dis.c tic80-opc.c v850-dis.c v850-opc.c vax-dis.c w65-dis.c xstormy16-asm.c xstormy16-desc.c xstormy16-dis.c xstormy16-ibld.c xstormy16-opc.c xtensa-dis.c z8k-dis.c z8kgen.c - - -ALL_MACHINES = a29k-dis.lo alpha-dis.lo alpha-opc.lo arc-dis.lo arc-opc.lo arc-ext.lo arm-dis.lo avr-dis.lo cgen-asm.lo cgen-dis.lo cgen-opc.lo cris-dis.lo cris-opc.lo crx-dis.lo crx-opc.lo d10v-dis.lo d10v-opc.lo d30v-dis.lo d30v-opc.lo dlx-dis.lo fr30-asm.lo fr30-desc.lo fr30-dis.lo fr30-ibld.lo fr30-opc.lo frv-asm.lo frv-desc.lo frv-dis.lo frv-ibld.lo frv-opc.lo h8300-dis.lo h8500-dis.lo hppa-dis.lo i386-dis.lo i370-dis.lo i370-opc.lo i860-dis.lo i960-dis.lo ia64-dis.lo ia64-opc.lo ip2k-asm.lo ip2k-desc.lo ip2k-dis.lo ip2k-ibld.lo ip2k-opc.lo iq2000-asm.lo iq2000-desc.lo iq2000-dis.lo iq2000-ibld.lo iq2000-opc.lo m32r-asm.lo m32r-desc.lo m32r-dis.lo m32r-ibld.lo m32r-opc.lo m32r-opinst.lo m68hc11-dis.lo m68hc11-opc.lo m68k-dis.lo m68k-opc.lo m88k-dis.lo m10200-dis.lo m10200-opc.lo m10300-dis.lo m10300-opc.lo mcore-dis.lo mips-dis.lo mips-opc.lo mips16-opc.lo mmix-dis.lo mmix-opc.lo msp430-dis.lo ns32k-dis.lo openrisc-asm.lo openrisc-desc.lo openrisc-dis.lo openrisc-ibld.lo openrisc-opc.lo or32-dis.lo or32-opc.lo pdp11-dis.lo pdp11-opc.lo pj-dis.lo pj-opc.lo ppc-dis.lo ppc-opc.lo s390-dis.lo s390-opc.lo sh-dis.lo sh64-dis.lo sh64-opc.lo sparc-dis.lo sparc-opc.lo tic30-dis.lo tic4x-dis.lo tic54x-dis.lo tic54x-opc.lo tic80-dis.lo tic80-opc.lo v850-dis.lo v850-opc.lo vax-dis.lo w65-dis.lo xstormy16-asm.lo xstormy16-desc.lo xstormy16-dis.lo xstormy16-ibld.lo xstormy16-opc.lo xtensa-dis.lo z8k-dis.lo - +CFILES = \ + a29k-dis.c \ + alpha-dis.c \ + alpha-opc.c \ + arc-dis.c \ + arc-opc.c \ + arc-ext.c \ + arm-dis.c \ + avr-dis.c \ + cgen-asm.c \ + cgen-dis.c \ + cgen-opc.c \ + cris-dis.c \ + cris-opc.c \ + crx-dis.c \ + crx-opc.c \ + d10v-dis.c \ + d10v-opc.c \ + d30v-dis.c \ + d30v-opc.c \ + dlx-dis.c \ + dis-buf.c \ + dis-init.c \ + disassemble.c \ + fr30-asm.c \ + fr30-desc.c \ + fr30-dis.c \ + fr30-ibld.c \ + fr30-opc.c \ + frv-asm.c \ + frv-desc.c \ + frv-dis.c \ + frv-ibld.c \ + frv-opc.c \ + h8300-dis.c \ + h8500-dis.c \ + hppa-dis.c \ + i370-dis.c \ + i370-opc.c \ + i386-dis.c \ + i860-dis.c \ + i960-dis.c \ + ia64-dis.c \ + ia64-opc-a.c \ + ia64-opc-b.c \ + ia64-opc-f.c \ + ia64-opc-i.c \ + ia64-opc-m.c \ + ia64-opc-d.c \ + ia64-opc.c \ + ia64-gen.c \ + ia64-asmtab.c \ + ip2k-asm.c \ + ip2k-desc.c \ + ip2k-dis.c \ + ip2k-ibld.c \ + ip2k-opc.c \ + iq2000-asm.c \ + iq2000-desc.c \ + iq2000-dis.c \ + iq2000-ibld.c \ + iq2000-opc.c \ + m32r-asm.c \ + m32r-desc.c \ + m32r-dis.c \ + m32r-ibld.c \ + m32r-opc.c \ + m32r-opinst.c \ + m68hc11-dis.c \ + m68hc11-opc.c \ + m68k-dis.c \ + m68k-opc.c \ + m88k-dis.c \ + mcore-dis.c \ + mips-dis.c \ + mips-opc.c \ + mips16-opc.c \ + m10200-dis.c \ + m10200-opc.c \ + m10300-dis.c \ + m10300-opc.c \ + mmix-dis.c \ + mmix-opc.c \ + ns32k-dis.c \ + openrisc-asm.c \ + openrisc-desc.c \ + openrisc-dis.c \ + openrisc-ibld.c \ + openrisc-opc.c \ + or32-dis.c \ + or32-opc.c \ + pdp11-dis.c \ + pdp11-opc.c \ + pj-dis.c \ + pj-opc.c \ + ppc-dis.c \ + ppc-opc.c \ + s390-mkopc.c \ + s390-opc.c \ + s390-dis.c \ + sh-dis.c \ + sh64-dis.c \ + sh64-opc.c \ + sparc-dis.c \ + sparc-opc.c \ + tic30-dis.c \ + tic4x-dis.c \ + tic54x-dis.c \ + tic54x-opc.c \ + tic80-dis.c \ + tic80-opc.c \ + v850-dis.c \ + v850-opc.c \ + vax-dis.c \ + w65-dis.c \ + xstormy16-asm.c \ + xstormy16-desc.c \ + xstormy16-dis.c \ + xstormy16-ibld.c \ + xstormy16-opc.c \ + xtensa-dis.c \ + z8k-dis.c \ + z8kgen.c + +ALL_MACHINES = \ + a29k-dis.lo \ + alpha-dis.lo \ + alpha-opc.lo \ + arc-dis.lo \ + arc-opc.lo \ + arc-ext.lo \ + arm-dis.lo \ + avr-dis.lo \ + cgen-asm.lo \ + cgen-dis.lo \ + cgen-opc.lo \ + cris-dis.lo \ + cris-opc.lo \ + crx-dis.lo \ + crx-opc.lo \ + d10v-dis.lo \ + d10v-opc.lo \ + d30v-dis.lo \ + d30v-opc.lo \ + dlx-dis.lo \ + fr30-asm.lo \ + fr30-desc.lo \ + fr30-dis.lo \ + fr30-ibld.lo \ + fr30-opc.lo \ + frv-asm.lo \ + frv-desc.lo \ + frv-dis.lo \ + frv-ibld.lo \ + frv-opc.lo \ + h8300-dis.lo \ + h8500-dis.lo \ + hppa-dis.lo \ + i386-dis.lo \ + i370-dis.lo \ + i370-opc.lo \ + i860-dis.lo \ + i960-dis.lo \ + ia64-dis.lo \ + ia64-opc.lo \ + ip2k-asm.lo \ + ip2k-desc.lo \ + ip2k-dis.lo \ + ip2k-ibld.lo \ + ip2k-opc.lo \ + iq2000-asm.lo \ + iq2000-desc.lo \ + iq2000-dis.lo \ + iq2000-ibld.lo \ + iq2000-opc.lo \ + m32r-asm.lo \ + m32r-desc.lo \ + m32r-dis.lo \ + m32r-ibld.lo \ + m32r-opc.lo \ + m32r-opinst.lo \ + m68hc11-dis.lo \ + m68hc11-opc.lo \ + m68k-dis.lo \ + m68k-opc.lo \ + m88k-dis.lo \ + m10200-dis.lo \ + m10200-opc.lo \ + m10300-dis.lo \ + m10300-opc.lo \ + mcore-dis.lo \ + mips-dis.lo \ + mips-opc.lo \ + mips16-opc.lo \ + mmix-dis.lo \ + mmix-opc.lo \ + msp430-dis.lo \ + ns32k-dis.lo \ + openrisc-asm.lo \ + openrisc-desc.lo \ + openrisc-dis.lo \ + openrisc-ibld.lo \ + openrisc-opc.lo \ + or32-dis.lo \ + or32-opc.lo \ + pdp11-dis.lo \ + pdp11-opc.lo \ + pj-dis.lo \ + pj-opc.lo \ + ppc-dis.lo \ + ppc-opc.lo \ + s390-dis.lo \ + s390-opc.lo \ + sh-dis.lo \ + sh64-dis.lo \ + sh64-opc.lo \ + sparc-dis.lo \ + sparc-opc.lo \ + tic30-dis.lo \ + tic4x-dis.lo \ + tic54x-dis.lo \ + tic54x-opc.lo \ + tic80-dis.lo \ + tic80-opc.lo \ + v850-dis.lo \ + v850-opc.lo \ + vax-dis.lo \ + w65-dis.lo \ + xstormy16-asm.lo \ + xstormy16-desc.lo \ + xstormy16-dis.lo \ + xstormy16-ibld.lo \ + xstormy16-opc.lo \ + xtensa-dis.lo \ + z8k-dis.lo OFILES = @BFD_MACHINES@ - INCLUDES = -D_GNU_SOURCE -I. -I$(srcdir) -I../bfd -I$(INCDIR) -I$(BFDDIR) @HDEFINES@ -I$(srcdir)/../intl -I../intl - libopcodes_la_SOURCES = dis-buf.c disassemble.c dis-init.c # It's desirable to list ../bfd/libbfd.la in DEPENDENCIES and LIBADD. # Unfortunately this causes libtool to add -L$(libdir), referring to the @@ -171,155 +517,116 @@ libopcodes_la_LDFLAGS = -release $(VERSION) @WIN32LDFLAGS@ # the build directory so that we don't have to convert all the # programs that use libopcodes.a simultaneously. This is a hack which # should be removed if everything else starts using libtool. FIXME. - noinst_LIBRARIES = libopcodes.a - POTFILES = $(HFILES) $(CFILES) - -CLEANFILES = stamp-ip2k stamp-m32r stamp-fr30 stamp-frv stamp-openrisc stamp-iq2000 stamp-xstormy16 libopcodes.a stamp-lib dep.sed DEP DEPA DEP1 DEP2 - +CLEANFILES = \ + stamp-ip2k stamp-m32r stamp-fr30 stamp-frv stamp-openrisc \ + stamp-iq2000 stamp-xstormy16 \ + libopcodes.a stamp-lib dep.sed DEP DEPA DEP1 DEP2 CGENDIR = @cgendir@ CPUDIR = $(CGENDIR)/cpu CGEN = `if test -f ../guile/libguile/guile ; then echo ../guile/libguile/guile; else echo guile ; fi` CGENFLAGS = -v - -CGENDEPS = $(CGENDIR)/desc.scm $(CGENDIR)/desc-cpu.scm $(CGENDIR)/opcodes.scm $(CGENDIR)/opc-asmdis.scm $(CGENDIR)/opc-ibld.scm $(CGENDIR)/opc-itab.scm $(CGENDIR)/opc-opinst.scm cgen-asm.in cgen-dis.in cgen-ibld.in - +CGENDEPS = \ + $(CGENDIR)/desc.scm $(CGENDIR)/desc-cpu.scm \ + $(CGENDIR)/opcodes.scm $(CGENDIR)/opc-asmdis.scm \ + $(CGENDIR)/opc-ibld.scm $(CGENDIR)/opc-itab.scm \ + $(CGENDIR)/opc-opinst.scm \ + cgen-asm.in cgen-dis.in cgen-ibld.in CGEN_CPUS = fr30 frv ip2k m32r openrisc xstormy16 -@CGEN_MAINT_TRUE@IP2K_DEPS = stamp-ip2k @CGEN_MAINT_FALSE@IP2K_DEPS = -@CGEN_MAINT_TRUE@M32R_DEPS = stamp-m32r +@CGEN_MAINT_TRUE@IP2K_DEPS = stamp-ip2k @CGEN_MAINT_FALSE@M32R_DEPS = -@CGEN_MAINT_TRUE@FR30_DEPS = stamp-fr30 +@CGEN_MAINT_TRUE@M32R_DEPS = stamp-m32r @CGEN_MAINT_FALSE@FR30_DEPS = -@CGEN_MAINT_TRUE@FRV_DEPS = stamp-frv +@CGEN_MAINT_TRUE@FR30_DEPS = stamp-fr30 @CGEN_MAINT_FALSE@FRV_DEPS = -@CGEN_MAINT_TRUE@OPENRISC_DEPS = stamp-openrisc +@CGEN_MAINT_TRUE@FRV_DEPS = stamp-frv @CGEN_MAINT_FALSE@OPENRISC_DEPS = -@CGEN_MAINT_TRUE@IQ2000_DEPS = stamp-iq2000 +@CGEN_MAINT_TRUE@OPENRISC_DEPS = stamp-openrisc @CGEN_MAINT_FALSE@IQ2000_DEPS = -@CGEN_MAINT_TRUE@XSTORMY16_DEPS = stamp-xstormy16 +@CGEN_MAINT_TRUE@IQ2000_DEPS = stamp-iq2000 @CGEN_MAINT_FALSE@XSTORMY16_DEPS = -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs -CONFIG_HEADER = config.h -CONFIG_CLEAN_FILES = -LIBRARIES = $(noinst_LIBRARIES) - - -DEFS = @DEFS@ -I. -I$(srcdir) -I. -CPPFLAGS = @CPPFLAGS@ -LDFLAGS = @LDFLAGS@ -LIBS = @LIBS@ -libopcodes_a_LIBADD = -libopcodes_a_SOURCES = libopcodes.a.c -libopcodes_a_OBJECTS = libopcodes.a.$(OBJEXT) -LTLIBRARIES = $(bfdlib_LTLIBRARIES) - -libopcodes_la_OBJECTS = dis-buf.lo disassemble.lo dis-init.lo -CFLAGS = @CFLAGS@ -COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ -DIST_COMMON = ./stamp-h.in ChangeLog Makefile.am Makefile.in \ -acinclude.m4 aclocal.m4 config.in configure configure.in - - -DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) - -TAR = tar -GZIP_ENV = --best -SOURCES = libopcodes.a.c $(libopcodes_la_SOURCES) -OBJECTS = libopcodes.a.$(OBJEXT) $(libopcodes_la_OBJECTS) +@CGEN_MAINT_TRUE@XSTORMY16_DEPS = stamp-xstormy16 +all: config.h + $(MAKE) $(AM_MAKEFLAGS) all-recursive -all: all-redirect .SUFFIXES: -.SUFFIXES: .S .c .lo .o .obj .s -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile +.SUFFIXES: .c .lo .o .obj +am--refresh: + @: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --cygnus '; \ + cd $(srcdir) && $(AUTOMAKE) --cygnus \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --cygnus Makefile +.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in acinclude.m4 - cd $(srcdir) && $(ACLOCAL) -$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) -config.h: stamp-h - @if test ! -f $@; then \ - rm -f stamp-h; \ - $(MAKE) stamp-h; \ - else :; fi -stamp-h: $(srcdir)/config.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES= CONFIG_HEADERS=config.h:config.in \ - $(SHELL) ./config.status - @echo timestamp > stamp-h 2> /dev/null -$(srcdir)/config.in: @MAINTAINER_MODE_TRUE@$(srcdir)/stamp-h.in +config.h: stamp-h1 @if test ! -f $@; then \ - rm -f $(srcdir)/stamp-h.in; \ - $(MAKE) $(srcdir)/stamp-h.in; \ + rm -f stamp-h1; \ + $(MAKE) stamp-h1; \ else :; fi -$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && $(AUTOHEADER) - @echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null -mostlyclean-hdr: - -clean-hdr: +stamp-h1: $(srcdir)/config.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status config.h +$(srcdir)/config.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_srcdir) && $(AUTOHEADER) + rm -f stamp-h1 + touch $@ distclean-hdr: - -rm -f config.h - -maintainer-clean-hdr: - -mostlyclean-noinstLIBRARIES: + -rm -f config.h stamp-h1 +po/Makefile.in: $(top_builddir)/config.status $(top_srcdir)/po/Make-in + cd $(top_builddir) && $(SHELL) ./config.status $@ clean-noinstLIBRARIES: -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES) -distclean-noinstLIBRARIES: - -maintainer-clean-noinstLIBRARIES: - -.c.o: - $(COMPILE) -c $< - -# FIXME: We should only use cygpath when building on Windows, -# and only if it is available. -.c.obj: - $(COMPILE) -c `cygpath -w $<` - -.s.o: - $(COMPILE) -c $< - -.S.o: - $(COMPILE) -c $< +clean-bfdlibLTLIBRARIES: + -test -z "$(bfdlib_LTLIBRARIES)" || rm -f $(bfdlib_LTLIBRARIES) + @list='$(bfdlib_LTLIBRARIES)'; for p in $$list; do \ + dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ + test "$$dir" != "$$p" || dir=.; \ + echo "rm -f \"$${dir}/so_locations\""; \ + rm -f "$${dir}/so_locations"; \ + done +libopcodes.la: $(libopcodes_la_OBJECTS) $(libopcodes_la_DEPENDENCIES) + $(LINK) -rpath $(bfdlibdir) $(libopcodes_la_LDFLAGS) $(libopcodes_la_OBJECTS) $(libopcodes_la_LIBADD) $(LIBS) mostlyclean-compile: - -rm -f *.o core *.core -rm -f *.$(OBJEXT) -clean-compile: - distclean-compile: -rm -f *.tab.c -maintainer-clean-compile: - -.c.lo: - $(LIBTOOL) --mode=compile $(COMPILE) -c $< +.c.o: + $(COMPILE) -c $< -.s.lo: - $(LIBTOOL) --mode=compile $(COMPILE) -c $< +.c.obj: + $(COMPILE) -c `$(CYGPATH_W) '$<'` -.S.lo: - $(LIBTOOL) --mode=compile $(COMPILE) -c $< +.c.lo: + $(LTCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo @@ -328,20 +635,8 @@ clean-libtool: -rm -rf .libs _libs distclean-libtool: - -maintainer-clean-libtool: - -mostlyclean-bfdlibLTLIBRARIES: - -clean-bfdlibLTLIBRARIES: - -test -z "$(bfdlib_LTLIBRARIES)" || rm -f $(bfdlib_LTLIBRARIES) - -distclean-bfdlibLTLIBRARIES: - -maintainer-clean-bfdlibLTLIBRARIES: - -libopcodes.la: $(libopcodes_la_OBJECTS) $(libopcodes_la_DEPENDENCIES) - $(LINK) -rpath $(bfdlibdir) $(libopcodes_la_LDFLAGS) $(libopcodes_la_OBJECTS) $(libopcodes_la_LIBADD) $(LIBS) + -rm -f libtool +uninstall-info-am: # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. @@ -349,13 +644,8 @@ libopcodes.la: $(libopcodes_la_OBJECTS) $(libopcodes_la_DEPENDENCIES) # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. - -@SET_MAKE@ - -all-recursive install-data-recursive install-exec-recursive \ -installdirs-recursive install-recursive uninstall-recursive install-info-recursive \ -check-recursive installcheck-recursive info-recursive dvi-recursive: - @set fnord $(MAKEFLAGS); amf=$$2; \ +$(RECURSIVE_TARGETS): + @set fnord $$MAKEFLAGS; amf=$$2; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ @@ -375,13 +665,18 @@ check-recursive installcheck-recursive info-recursive dvi-recursive: mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: - @set fnord $(MAKEFLAGS); amf=$$2; \ + @set fnord $$MAKEFLAGS; amf=$$2; \ dot_seen=no; \ - rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ - rev="$$subdir $$rev"; \ - test "$$subdir" != "." || dot_seen=yes; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ done; \ - test "$$dot_seen" = "no" && rev=". $$rev"; \ + rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ @@ -397,196 +692,173 @@ tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done -tags: TAGS - -ID: $(HEADERS) $(SOURCES) $(LISP) - list='$(SOURCES) $(HEADERS)'; \ - unique=`for i in $$list; do echo $$i; done | \ - awk ' { files[$$0] = 1; } \ +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - here=`pwd` && cd $(srcdir) \ - && mkid -f$$here/ID $$unique $(LISP) + mkid -fID $$unique +tags: TAGS -TAGS: tags-recursive $(HEADERS) $(SOURCES) config.in $(TAGS_DEPENDENCIES) $(LISP) +TAGS: tags-recursive $(HEADERS) $(SOURCES) config.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ - fi; \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ done; \ - list='$(SOURCES) $(HEADERS)'; \ - unique=`for i in $$list; do echo $$i; done | \ - awk ' { files[$$0] = 1; } \ + list='$(SOURCES) $(HEADERS) config.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)config.in$$unique$(LISP)$$tags" \ - || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags config.in $$unique $(LISP)) - -mostlyclean-tags: + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) config.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique -clean-tags: +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here distclean-tags: - -rm -f TAGS ID - -maintainer-clean-tags: - -distdir = $(PACKAGE)-$(VERSION) -top_distdir = $(distdir) - -# This target untars the dist file and tries a VPATH configuration. Then -# it guarantees that the distribution is self-contained by making another -# tarfile. -distcheck: dist - -rm -rf $(distdir) - GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz - mkdir $(distdir)/=build - mkdir $(distdir)/=inst - dc_install_base=`cd $(distdir)/=inst && pwd`; \ - cd $(distdir)/=build \ - && ../configure --srcdir=.. --prefix=$$dc_install_base \ - && $(MAKE) $(AM_MAKEFLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) dvi \ - && $(MAKE) $(AM_MAKEFLAGS) check \ - && $(MAKE) $(AM_MAKEFLAGS) install \ - && $(MAKE) $(AM_MAKEFLAGS) installcheck \ - && $(MAKE) $(AM_MAKEFLAGS) dist - -rm -rf $(distdir) - @banner="$(distdir).tar.gz is ready for distribution"; \ - dashes=`echo "$$banner" | sed s/./=/g`; \ - echo "$$dashes"; \ - echo "$$banner"; \ - echo "$$dashes" -dist: distdir - -chmod -R a+r $(distdir) - GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) - -rm -rf $(distdir) -dist-all: distdir - -chmod -R a+r $(distdir) - GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) - -rm -rf $(distdir) -distdir: $(DISTFILES) - -rm -rf $(distdir) - mkdir $(distdir) - -chmod 777 $(distdir) - @for file in $(DISTFILES); do \ - if test -f $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - cp -pr $$d/$$file $(distdir)/$$file; \ - else \ - test -f $(distdir)/$$file \ - || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ - || cp -p $$d/$$file $(distdir)/$$file || :; \ - fi; \ - done - for subdir in $(SUBDIRS); do \ - if test "$$subdir" = .; then :; else \ - test -d $(distdir)/$$subdir \ - || mkdir $(distdir)/$$subdir \ - || exit 1; \ - chmod 777 $(distdir)/$$subdir; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \ - || exit 1; \ - fi; \ - done -info-am: -info: info-recursive -dvi-am: -dvi: dvi-recursive + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags check-am: check: check-recursive -installcheck-am: -installcheck: installcheck-recursive -install-info-am: -install-info: install-info-recursive -all-recursive-am: config.h - $(MAKE) $(AM_MAKEFLAGS) all-recursive - -install-exec-am: +all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) config.h +installdirs: installdirs-recursive +installdirs-am: + for dir in "$(DESTDIR)$(bfdlibdir)"; do \ + test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done +install: install-recursive install-exec: install-exec-recursive - -install-data-am: install-bfdlibLTLIBRARIES install-data: install-data-recursive +uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am -install: install-recursive -uninstall-am: uninstall-bfdlibLTLIBRARIES -uninstall: uninstall-recursive -all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) config.h -all-redirect: all-recursive-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install -installdirs: installdirs-recursive -installdirs-am: - $(mkinstalldirs) $(DESTDIR)$(bfdlibdir) - +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: - -rm -f Makefile $(CONFIG_CLEAN_FILES) - -rm -f config.cache config.log stamp-h stamp-h[0-9]* + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: -mostlyclean-am: mostlyclean-hdr mostlyclean-noinstLIBRARIES \ - mostlyclean-compile mostlyclean-libtool \ - mostlyclean-bfdlibLTLIBRARIES mostlyclean-tags \ - mostlyclean-generic + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-recursive -mostlyclean: mostlyclean-recursive +clean-am: clean-bfdlibLTLIBRARIES clean-generic clean-libtool \ + clean-noinstLIBRARIES mostlyclean-am -clean-am: clean-hdr clean-noinstLIBRARIES clean-compile clean-libtool \ - clean-bfdlibLTLIBRARIES clean-tags clean-generic \ - mostlyclean-am +distclean: distclean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-hdr distclean-libtool distclean-tags -clean: clean-recursive +dvi: dvi-recursive -distclean-am: distclean-hdr distclean-noinstLIBRARIES distclean-compile \ - distclean-libtool distclean-bfdlibLTLIBRARIES \ - distclean-tags distclean-generic clean-am - -rm -f libtool +dvi-am: -distclean: distclean-recursive - -rm -f config.status - -maintainer-clean-am: maintainer-clean-hdr \ - maintainer-clean-noinstLIBRARIES \ - maintainer-clean-compile maintainer-clean-libtool \ - maintainer-clean-bfdlibLTLIBRARIES \ - maintainer-clean-tags maintainer-clean-generic \ - distclean-am - @echo "This command is intended for maintainers to use;" - @echo "it deletes files that may require special tools to rebuild." +html: html-recursive + +info: info-recursive + +info-am: + +install-data-am: install-bfdlibLTLIBRARIES + +install-exec-am: + +install-info: install-info-recursive + +install-man: + +installcheck-am: maintainer-clean: maintainer-clean-recursive - -rm -f config.status - -.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \ -mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \ -clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \ -mostlyclean-compile distclean-compile clean-compile \ -maintainer-clean-compile mostlyclean-libtool distclean-libtool \ -clean-libtool maintainer-clean-libtool mostlyclean-bfdlibLTLIBRARIES \ -distclean-bfdlibLTLIBRARIES clean-bfdlibLTLIBRARIES \ -maintainer-clean-bfdlibLTLIBRARIES uninstall-bfdlibLTLIBRARIES \ -install-bfdlibLTLIBRARIES install-data-recursive \ -uninstall-data-recursive install-exec-recursive \ -uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \ -all-recursive check-recursive installcheck-recursive info-recursive \ -dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \ -maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ -distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ -dvi-am dvi check check-am installcheck-am installcheck install-info-am \ -install-info all-recursive-am install-exec-am install-exec \ -install-data-am install-data install-am install uninstall-am uninstall \ -all-redirect all-am all installdirs-am installdirs mostlyclean-generic \ -distclean-generic clean-generic maintainer-clean-generic clean \ -mostlyclean distclean maintainer-clean + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: uninstall-bfdlibLTLIBRARIES + +uninstall-info: uninstall-info-recursive + +.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ + check-am clean clean-bfdlibLTLIBRARIES clean-generic \ + clean-libtool clean-noinstLIBRARIES clean-recursive ctags \ + ctags-recursive distclean distclean-compile distclean-generic \ + distclean-hdr distclean-libtool distclean-recursive \ + distclean-tags dvi dvi-am html html-am info info-am install \ + install-am install-bfdlibLTLIBRARIES install-data \ + install-data-am install-exec install-exec-am install-info \ + install-info-am install-man install-strip installcheck \ + installcheck-am installdirs installdirs-am maintainer-clean \ + maintainer-clean-generic maintainer-clean-recursive \ + mostlyclean mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \ + tags tags-recursive uninstall uninstall-am \ + uninstall-bfdlibLTLIBRARIES uninstall-info-am disassemble.lo: disassemble.c $(INCDIR)/dis-asm.h @@ -801,9 +1073,11 @@ cris-dis.lo: cris-dis.c $(INCDIR)/dis-asm.h $(BFD_H) \ $(INCDIR)/ansidecl.h $(INCDIR)/symcat.h sysdep.h config.h \ $(INCDIR)/opcode/cris.h $(INCDIR)/libiberty.h cris-opc.lo: cris-opc.c $(INCDIR)/opcode/cris.h -crx-dis.lo: crx-dis.c $(INCDIR)/opcode/crx.h \ - $(INCDIR)/dis-asm.h sysdep.h $(INCDIR)/ansidecl.h -crx-opc.lo: crx-opc.c $(INCDIR)/opcode/crx.h +crx-dis.lo: crx-dis.c $(INCDIR)/dis-asm.h $(BFD_H) \ + $(INCDIR)/ansidecl.h $(INCDIR)/symcat.h sysdep.h config.h \ + $(INCDIR)/opcode/crx.h +crx-opc.lo: crx-opc.c $(INCDIR)/libiberty.h $(INCDIR)/ansidecl.h \ + $(INCDIR)/symcat.h $(INCDIR)/opcode/crx.h d10v-dis.lo: d10v-dis.c sysdep.h config.h $(INCDIR)/ansidecl.h \ $(INCDIR)/opcode/d10v.h $(INCDIR)/dis-asm.h $(BFD_H) \ $(INCDIR)/symcat.h @@ -1038,7 +1312,7 @@ s390-dis.lo: s390-dis.c $(INCDIR)/ansidecl.h sysdep.h \ config.h $(INCDIR)/dis-asm.h $(BFD_H) $(INCDIR)/symcat.h \ $(INCDIR)/opcode/s390.h sh-dis.lo: sh-dis.c sysdep.h config.h $(INCDIR)/ansidecl.h \ - sh-opc.h $(INCDIR)/dis-asm.h $(BFD_H) $(INCDIR)/symcat.h + sh-opc.h $(BFD_H) $(INCDIR)/symcat.h $(INCDIR)/dis-asm.h sh64-dis.lo: sh64-dis.c $(INCDIR)/dis-asm.h $(BFD_H) \ $(INCDIR)/ansidecl.h $(INCDIR)/symcat.h sysdep.h config.h \ sh64-opc.h $(INCDIR)/libiberty.h $(BFDDIR)/elf-bfd.h \ @@ -1102,7 +1376,6 @@ z8k-dis.lo: z8k-dis.c sysdep.h config.h $(INCDIR)/ansidecl.h \ z8kgen.lo: z8kgen.c sysdep.h config.h $(INCDIR)/ansidecl.h \ $(INCDIR)/libiberty.h # IF YOU PUT ANYTHING HERE IT WILL GO AWAY - # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diff --git a/opcodes/aclocal.m4 b/opcodes/aclocal.m4 index d5ae233..49e8d5b 100644 --- a/opcodes/aclocal.m4 +++ b/opcodes/aclocal.m4 @@ -1,923 +1,835 @@ -dnl aclocal.m4 generated automatically by aclocal 1.4-p6 - -dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl This program is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without -dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A -dnl PARTICULAR PURPOSE. - -sinclude(../bfd/acinclude.m4) - -dnl sinclude(../libtool.m4) already included in bfd/acinclude.m4 -dnl The lines below arrange for aclocal not to bring libtool.m4 -dnl AM_PROG_LIBTOOL into aclocal.m4, while still arranging for automake -dnl to add a definition of LIBTOOL to Makefile.in. -ifelse(yes,no,[ -AC_DEFUN([AM_PROG_LIBTOOL],) -AC_DEFUN([AM_DISABLE_SHARED],) -AC_SUBST(LIBTOOL) -]) +# generated automatically by aclocal 1.9.1 -*- Autoconf -*- -dnl sinclude(../gettext.m4) already included in bfd/acinclude.m4 -ifelse(yes,no,[ -AC_DEFUN([CY_WITH_NLS],) -AC_SUBST(INTLLIBS) -]) +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 +# Free Software Foundation, Inc. +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +# -*- Autoconf -*- +# Copyright (C) 2002, 2003 Free Software Foundation, Inc. +# Generated from amversion.in; do not edit by hand. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION so it can be traced. +# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], + [AM_AUTOMAKE_VERSION([1.9.1])]) + +# AM_AUX_DIR_EXPAND + +# Copyright (C) 2001, 2003 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. -dnl AM_INSTALL_LIBBFD already included in bfd/acinclude.m4 -ifelse(yes,no,[ -AC_DEFUN([AM_INSTALL_LIBBFD],) -AC_SUBST(bfdlibdir) -AC_SUBST(bfdincludedir) +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to +# `$srcdir', `$srcdir/..', or `$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is `.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[dnl Rely on autoconf to set up CDPATH properly. +AC_PREREQ([2.50])dnl +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` ]) -# lib-prefix.m4 serial 3 (gettext-0.13) -dnl Copyright (C) 2001-2003 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. - -dnl From Bruno Haible. - -dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and -dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't -dnl require excessive bracketing. -ifdef([AC_HELP_STRING], -[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])], -[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])]) - -dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed -dnl to access previously installed libraries. The basic assumption is that -dnl a user will want packages to use other packages he previously installed -dnl with the same --prefix option. -dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate -dnl libraries, but is otherwise very convenient. -AC_DEFUN([AC_LIB_PREFIX], -[ - AC_BEFORE([$0], [AC_LIB_LINKFLAGS]) - AC_REQUIRE([AC_PROG_CC]) - AC_REQUIRE([AC_CANONICAL_HOST]) - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - dnl By default, look in $includedir and $libdir. - use_additional=yes - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - AC_LIB_ARG_WITH([lib-prefix], -[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib - --without-lib-prefix don't search for libraries in includedir and libdir], -[ - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997, 2000, 2001, 2003, 2004 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 6 + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ(2.52)dnl + ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE]) +AC_SUBST([$1_FALSE]) +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) + +# serial 7 -*- Autoconf -*- + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 +# Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + + +# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + + +# _AM_DEPENDENCIES(NAME) +# ---------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX", "GCJ", or "OBJC". +# We try a few techniques and use that to set a single cache variable. +# +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +ifelse([$1], CC, [depcc="$CC" am_compiler_list=], + [$1], CXX, [depcc="$CXX" am_compiler_list=], + [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + case $depmode in + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue else - additional_includedir="$withval/include" - additional_libdir="$withval/lib" - fi - fi -]) - if test $use_additional = yes; then - dnl Potentially add $additional_includedir to $CPPFLAGS. - dnl But don't add it - dnl 1. if it's the standard /usr/include, - dnl 2. if it's already present in $CPPFLAGS, - dnl 3. if it's /usr/local/include and we are using GCC on Linux, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - for x in $CPPFLAGS; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux*) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - dnl Really add $additional_includedir to $CPPFLAGS. - CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir" - fi - fi + break fi - fi - dnl Potentially add $additional_libdir to $LDFLAGS. - dnl But don't add it - dnl 1. if it's the standard /usr/lib, - dnl 2. if it's already present in $LDFLAGS, - dnl 3. if it's /usr/local/lib and we are using GCC on Linux, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_libdir" != "X/usr/lib"; then - haveit= - for x in $LDFLAGS; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test "X$additional_libdir" = "X/usr/local/lib"; then - if test -n "$GCC"; then - case $host_os in - linux*) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - dnl Really add $additional_libdir to $LDFLAGS. - LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir" - fi - fi + ;; + none) break ;; + esac + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. + if depmode=$depmode \ + source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break fi fi - fi -]) + done -dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix, -dnl acl_final_exec_prefix, containing the values to which $prefix and -dnl $exec_prefix will expand at the end of the configure script. -AC_DEFUN([AC_LIB_PREPARE_PREFIX], -[ - dnl Unfortunately, prefix and exec_prefix get only finally determined - dnl at the end of configure. - if test "X$prefix" = "XNONE"; then - acl_final_prefix="$ac_default_prefix" - else - acl_final_prefix="$prefix" - fi - if test "X$exec_prefix" = "XNONE"; then - acl_final_exec_prefix='${prefix}' - else - acl_final_exec_prefix="$exec_prefix" - fi - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" - prefix="$acl_save_prefix" + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi ]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) + -dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the -dnl variables prefix and exec_prefix bound to the values they will have -dnl at the end of the configure script. -AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX], -[ - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - $1 - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES +AC_DEFUN([AM_SET_DEPDIR], +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) -# lib-link.m4 serial 4 (gettext-0.12) -dnl Copyright (C) 2001-2003 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. - -dnl From Bruno Haible. - -dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and -dnl the libraries corresponding to explicit and implicit dependencies. -dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and -dnl augments the CPPFLAGS variable. -AC_DEFUN([AC_LIB_LINKFLAGS], -[ - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - define([Name],[translit([$1],[./-], [___])]) - define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) - AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [ - AC_LIB_LINKFLAGS_BODY([$1], [$2]) - ac_cv_lib[]Name[]_libs="$LIB[]NAME" - ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME" - ac_cv_lib[]Name[]_cppflags="$INC[]NAME" - ]) - LIB[]NAME="$ac_cv_lib[]Name[]_libs" - LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs" - INC[]NAME="$ac_cv_lib[]Name[]_cppflags" - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) - AC_SUBST([LIB]NAME) - AC_SUBST([LTLIB]NAME) - dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the - dnl results of this search when this library appears as a dependency. - HAVE_LIB[]NAME=yes - undefine([Name]) - undefine([NAME]) + +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE(dependency-tracking, +[ --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH]) ]) -dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode) -dnl searches for libname and the libraries corresponding to explicit and -dnl implicit dependencies, together with the specified include files and -dnl the ability to compile and link the specified testcode. If found, it -dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and -dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and -dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs -dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty. -AC_DEFUN([AC_LIB_HAVE_LINKFLAGS], -[ - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - define([Name],[translit([$1],[./-], [___])]) - define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) - - dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME - dnl accordingly. - AC_LIB_LINKFLAGS_BODY([$1], [$2]) - - dnl Add $INC[]NAME to CPPFLAGS before performing the following checks, - dnl because if the user has installed lib[]Name and not disabled its use - dnl via --without-lib[]Name-prefix, he wants to use it. - ac_save_CPPFLAGS="$CPPFLAGS" - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) - - AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [ - ac_save_LIBS="$LIBS" - LIBS="$LIBS $LIB[]NAME" - AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no]) - LIBS="$ac_save_LIBS" - ]) - if test "$ac_cv_lib[]Name" = yes; then - HAVE_LIB[]NAME=yes - AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.]) - AC_MSG_CHECKING([how to link with lib[]$1]) - AC_MSG_RESULT([$LIB[]NAME]) +# Generate code to set up dependency tracking. -*- Autoconf -*- + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 +# Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +#serial 2 + +# _AM_OUTPUT_DEPENDENCY_COMMANDS +# ------------------------------ +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +[for mf in $CONFIG_FILES; do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # So let's grep whole file. + if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` else - HAVE_LIB[]NAME=no - dnl If $LIB[]NAME didn't lead to a usable library, we don't need - dnl $INC[]NAME either. - CPPFLAGS="$ac_save_CPPFLAGS" - LIB[]NAME= - LTLIB[]NAME= + continue fi - AC_SUBST([HAVE_LIB]NAME) - AC_SUBST([LIB]NAME) - AC_SUBST([LTLIB]NAME) - undefine([Name]) - undefine([NAME]) -]) + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done +done +])# _AM_OUTPUT_DEPENDENCY_COMMANDS -dnl Determine the platform dependent parameters needed to use rpath: -dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator, -dnl hardcode_direct, hardcode_minus_L. -AC_DEFUN([AC_LIB_RPATH], -[ - AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS - AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld - AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host - AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir - AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [ - CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ - ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh - . ./conftest.sh - rm -f ./conftest.sh - acl_cv_rpath=done - ]) - wl="$acl_cv_wl" - libext="$acl_cv_libext" - shlibext="$acl_cv_shlibext" - hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" - hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" - hardcode_direct="$acl_cv_hardcode_direct" - hardcode_minus_L="$acl_cv_hardcode_minus_L" - dnl Determine whether the user wants rpath handling at all. - AC_ARG_ENABLE(rpath, - [ --disable-rpath do not hardcode runtime library paths], - :, enable_rpath=yes) -]) -dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and -dnl the libraries corresponding to explicit and implicit dependencies. -dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables. -AC_DEFUN([AC_LIB_LINKFLAGS_BODY], -[ - define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) - dnl By default, look in $includedir and $libdir. - use_additional=yes - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - AC_LIB_ARG_WITH([lib$1-prefix], -[ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib - --without-lib$1-prefix don't search for lib$1 in includedir and libdir], -[ - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - else - additional_includedir="$withval/include" - additional_libdir="$withval/lib" - fi - fi -]) - dnl Search the library and its dependencies in $additional_libdir and - dnl $LDFLAGS. Using breadth-first-seach. - LIB[]NAME= - LTLIB[]NAME= - INC[]NAME= - rpathdirs= - ltrpathdirs= - names_already_handled= - names_next_round='$1 $2' - while test -n "$names_next_round"; do - names_this_round="$names_next_round" - names_next_round= - for name in $names_this_round; do - already_handled= - for n in $names_already_handled; do - if test "$n" = "$name"; then - already_handled=yes - break - fi - done - if test -z "$already_handled"; then - names_already_handled="$names_already_handled $name" - dnl See if it was already located by an earlier AC_LIB_LINKFLAGS - dnl or AC_LIB_HAVE_LINKFLAGS call. - uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` - eval value=\"\$HAVE_LIB$uppername\" - if test -n "$value"; then - if test "$value" = yes; then - eval value=\"\$LIB$uppername\" - test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value" - eval value=\"\$LTLIB$uppername\" - test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value" - else - dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined - dnl that this library doesn't exist. So just drop it. - : - fi - else - dnl Search the library lib$name in $additional_libdir and $LDFLAGS - dnl and the already constructed $LIBNAME/$LTLIBNAME. - found_dir= - found_la= - found_so= - found_a= - if test $use_additional = yes; then - if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then - found_dir="$additional_libdir" - found_so="$additional_libdir/lib$name.$shlibext" - if test -f "$additional_libdir/lib$name.la"; then - found_la="$additional_libdir/lib$name.la" - fi - else - if test -f "$additional_libdir/lib$name.$libext"; then - found_dir="$additional_libdir" - found_a="$additional_libdir/lib$name.$libext" - if test -f "$additional_libdir/lib$name.la"; then - found_la="$additional_libdir/lib$name.la" - fi - fi - fi - fi - if test "X$found_dir" = "X"; then - for x in $LDFLAGS $LTLIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - case "$x" in - -L*) - dir=`echo "X$x" | sed -e 's/^X-L//'` - if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then - found_dir="$dir" - found_so="$dir/lib$name.$shlibext" - if test -f "$dir/lib$name.la"; then - found_la="$dir/lib$name.la" - fi - else - if test -f "$dir/lib$name.$libext"; then - found_dir="$dir" - found_a="$dir/lib$name.$libext" - if test -f "$dir/lib$name.la"; then - found_la="$dir/lib$name.la" - fi - fi - fi - ;; - esac - if test "X$found_dir" != "X"; then - break - fi - done - fi - if test "X$found_dir" != "X"; then - dnl Found the library. - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name" - if test "X$found_so" != "X"; then - dnl Linking with a shared library. We attempt to hardcode its - dnl directory into the executable's runpath, unless it's the - dnl standard /usr/lib. - if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then - dnl No hardcoding is needed. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - else - dnl Use an explicit option to hardcode DIR into the resulting - dnl binary. - dnl Potentially add DIR to ltrpathdirs. - dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $found_dir" - fi - dnl The hardcoding into $LIBNAME is system dependent. - if test "$hardcode_direct" = yes; then - dnl Using DIR/libNAME.so during linking hardcodes DIR into the - dnl resulting binary. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - else - if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then - dnl Use an explicit option to hardcode DIR into the resulting - dnl binary. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - dnl Potentially add DIR to rpathdirs. - dnl The rpathdirs will be appended to $LIBNAME at the end. - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $found_dir" - fi - else - dnl Rely on "-L$found_dir". - dnl But don't add it if it's already contained in the LDFLAGS - dnl or the already constructed $LIBNAME - haveit= - for x in $LDFLAGS $LIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir" - fi - if test "$hardcode_minus_L" != no; then - dnl FIXME: Not sure whether we should use - dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" - dnl here. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - else - dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH - dnl here, because this doesn't fit in flags passed to the - dnl compiler. So give up. No hardcoding. This affects only - dnl very old systems. - dnl FIXME: Not sure whether we should use - dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" - dnl here. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" - fi - fi - fi - fi - else - if test "X$found_a" != "X"; then - dnl Linking with a static library. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a" - else - dnl We shouldn't come here, but anyway it's good to have a - dnl fallback. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name" - fi - fi - dnl Assume the include files are nearby. - additional_includedir= - case "$found_dir" in - */lib | */lib/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'` - additional_includedir="$basedir/include" - ;; - esac - if test "X$additional_includedir" != "X"; then - dnl Potentially add $additional_includedir to $INCNAME. - dnl But don't add it - dnl 1. if it's the standard /usr/include, - dnl 2. if it's /usr/local/include and we are using GCC on Linux, - dnl 3. if it's already present in $CPPFLAGS or the already - dnl constructed $INCNAME, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux*) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - for x in $CPPFLAGS $INC[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - dnl Really add $additional_includedir to $INCNAME. - INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir" - fi - fi - fi - fi - fi - dnl Look for dependencies. - if test -n "$found_la"; then - dnl Read the .la file. It defines the variables - dnl dlname, library_names, old_library, dependency_libs, current, - dnl age, revision, installed, dlopen, dlpreopen, libdir. - save_libdir="$libdir" - case "$found_la" in - */* | *\\*) . "$found_la" ;; - *) . "./$found_la" ;; - esac - libdir="$save_libdir" - dnl We use only dependency_libs. - for dep in $dependency_libs; do - case "$dep" in - -L*) - additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` - dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME. - dnl But don't add it - dnl 1. if it's the standard /usr/lib, - dnl 2. if it's /usr/local/lib and we are using GCC on Linux, - dnl 3. if it's already present in $LDFLAGS or the already - dnl constructed $LIBNAME, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_libdir" != "X/usr/lib"; then - haveit= - if test "X$additional_libdir" = "X/usr/local/lib"; then - if test -n "$GCC"; then - case $host_os in - linux*) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - haveit= - for x in $LDFLAGS $LIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - dnl Really add $additional_libdir to $LIBNAME. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir" - fi - fi - haveit= - for x in $LDFLAGS $LTLIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - dnl Really add $additional_libdir to $LTLIBNAME. - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir" - fi - fi - fi - fi - ;; - -R*) - dir=`echo "X$dep" | sed -e 's/^X-R//'` - if test "$enable_rpath" != no; then - dnl Potentially add DIR to rpathdirs. - dnl The rpathdirs will be appended to $LIBNAME at the end. - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $dir" - fi - dnl Potentially add DIR to ltrpathdirs. - dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $dir" - fi - fi - ;; - -l*) - dnl Handle this in the next round. - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` - ;; - *.la) - dnl Handle this in the next round. Throw away the .la's - dnl directory; it is already contained in a preceding -L - dnl option. - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` - ;; - *) - dnl Most likely an immediate library name. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep" - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep" - ;; - esac - done - fi - else - dnl Didn't find the library; assume it is in the system directories - dnl known to the linker and runtime loader. (All the system - dnl directories known to the linker should also be known to the - dnl runtime loader, otherwise the system is severely misconfigured.) - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name" - fi - fi - fi - done - done - if test "X$rpathdirs" != "X"; then - if test -n "$hardcode_libdir_separator"; then - dnl Weird platform: only the last -rpath option counts, the user must - dnl pass all path elements in one option. We can arrange that for a - dnl single library, but not when more than one $LIBNAMEs are used. - alldirs= - for found_dir in $rpathdirs; do - alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir" - done - dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl. - acl_save_libdir="$libdir" - libdir="$alldirs" - eval flag=\"$hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" - else - dnl The -rpath options are cumulative. - for found_dir in $rpathdirs; do - acl_save_libdir="$libdir" - libdir="$found_dir" - eval flag=\"$hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" - done - fi - fi - if test "X$ltrpathdirs" != "X"; then - dnl When using libtool, the option that works for both libraries and - dnl executables is -R. The -R options are cumulative. - for found_dir in $ltrpathdirs; do - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir" - done - fi +# AM_OUTPUT_DEPENDENCY_COMMANDS +# ----------------------------- +# This macro should only be invoked once -- use via AC_REQUIRE. +# +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each `.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +[AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) -dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR, -dnl unless already present in VAR. -dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes -dnl contains two or three consecutive elements that belong together. -AC_DEFUN([AC_LIB_APPENDTOVAR], -[ - for element in [$2]; do - haveit= - for x in $[$1]; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X$element"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - [$1]="${[$1]}${[$1]:+ }$element" - fi - done -]) +# Like AC_CONFIG_HEADER, but automatically create stamp file. -*- Autoconf -*- -# lib-ld.m4 serial 3 (gettext-0.13) -dnl Copyright (C) 1996-2003 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. - -dnl Subroutines of libtool.m4, -dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision -dnl with libtool.m4. - -dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no. -AC_DEFUN([AC_LIB_PROG_LD_GNU], -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld, -[# I'd rather use --version here, but apparently some GNU ld's only accept -v. -case `$LD -v 2>&1 conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.58])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +# test to see if srcdir already configured +if test "`cd $srcdir && pwd`" != "`pwd`" && + test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' else - PATH_SEPARATOR=: + CYGPATH_W=echo fi - rm -f conf$$.sh fi -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by GCC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]* | [A-Za-z]:[\\/]*)] - [re_direlt='/[^/][^/]*/\.\./'] - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) + AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) +AM_MISSING_PROG(AUTOCONF, autoconf) +AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) +AM_MISSING_PROG(AUTOHEADER, autoheader) +AM_MISSING_PROG(MAKEINFO, makeinfo) +AM_PROG_INSTALL_SH +AM_PROG_INSTALL_STRIP +AC_REQUIRE([AM_PROG_MKDIR_P])dnl +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES(CC)], + [define([AC_PROG_CC], + defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES(CXX)], + [define([AC_PROG_CXX], + defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl +]) +]) + + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $1 | $1:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) +done +echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. + +# Copyright (C) 2001, 2003 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +install_sh=${install_sh-"$am_aux_dir/install-sh"} +AC_SUBST(install_sh)]) + +# -*- Autoconf -*- +# Copyright (C) 2003 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 1 + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. else - AC_MSG_CHECKING([for non-GNU ld]) + am__leading_dot=_ fi -AC_CACHE_VAL(acl_cv_path_LD, -[if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - acl_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in - *GNU* | *'with BFD'*) - test "$with_gnu_ld" != no && break ;; - *) - test "$with_gnu_ld" != yes && break ;; - esac - fi - done - IFS="$ac_save_ifs" -else - acl_cv_path_LD="$LD" # Let the user override the test with a path. -fi]) -LD="$acl_cv_path_LD" -if test -n "$LD"; then - AC_MSG_RESULT($LD) +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) + +# Add --enable-maintainer-mode option to configure. +# From Jim Meyering + +# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004 +# Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 3 + +AC_DEFUN([AM_MAINTAINER_MODE], +[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode is disabled by default + AC_ARG_ENABLE(maintainer-mode, +[ --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer], + USE_MAINTAINER_MODE=$enableval, + USE_MAINTAINER_MODE=no) + AC_MSG_RESULT([$USE_MAINTAINER_MODE]) + AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes]) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST(MAINT)dnl +] +) + +AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE]) + +# Check to see how 'make' treats includes. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 2 + +# AM_MAKE_INCLUDE() +# ----------------- +# Check to see how make treats includes. +AC_DEFUN([AM_MAKE_INCLUDE], +[am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo done +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# We grep out `Entering directory' and `Leaving directory' +# messages which can occur if `w' ends up in MAKEFLAGS. +# In particular we don't look at `^make:' because GNU make might +# be invoked under some other name (usually "gmake"), in which +# case it prints its new name instead of `make'. +if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then + am__include=include + am__quote= + _am_result=GNU +fi +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then + am__include=.include + am__quote="\"" + _am_result=BSD + fi +fi +AC_SUBST([am__include]) +AC_SUBST([am__quote]) +AC_MSG_RESULT([$_am_result]) +rm -f confinc confmf +]) + +# -*- Autoconf -*- + + +# Copyright (C) 1997, 1999, 2000, 2001, 2003 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 3 + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it supports --run. +# If it does, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " else - AC_MSG_RESULT(no) + am_missing_run= + AC_MSG_WARN([`missing' script is too old or missing]) fi -test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) -AC_LIB_PROG_LD_GNU ]) -# isc-posix.m4 serial 2 (gettext-0.11.2) -dnl Copyright (C) 1995-2002 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. - -# This file is not needed with autoconf-2.53 and newer. Remove it in 2005. - -# This test replaces the one in autoconf. -# Currently this macro should have the same name as the autoconf macro -# because gettext's gettext.m4 (distributed in the automake package) -# still uses it. Otherwise, the use in gettext.m4 makes autoheader -# give these diagnostics: -# configure.in:556: AC_TRY_COMPILE was called before AC_ISC_POSIX -# configure.in:556: AC_TRY_RUN was called before AC_ISC_POSIX - -undefine([AC_ISC_POSIX]) - -AC_DEFUN([AC_ISC_POSIX], - [ - dnl This test replaces the obsolescent AC_ISC_POSIX kludge. - AC_CHECK_LIB(cposix, strerror, [LIBS="$LIBS -lcposix"]) - ] -) +# AM_PROG_MKDIR_P +# --------------- +# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. -# Do all the work for Automake. This macro actually does too much -- -# some checks are only needed if your package does certain things. -# But this isn't really a big deal. +# Copyright (C) 2003, 2004 Free Software Foundation, Inc. -# serial 1 +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. -dnl Usage: -dnl AM_INIT_AUTOMAKE(package,version, [no-define]) +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. -AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl -AC_REQUIRE([AC_PROG_INSTALL]) -PACKAGE=[$1] -AC_SUBST(PACKAGE) -VERSION=[$2] -AC_SUBST(VERSION) -dnl test to see if srcdir already configured -if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories +# created by `make install' are always world readable, even if the +# installer happens to have an overly restrictive umask (e.g. 077). +# This was a mistake. There are at least two reasons why we must not +# use `-m 0755': +# - it causes special bits like SGID to be ignored, +# - it may be too restrictive (some setups expect 775 directories). +# +# Do not use -m 0755 and let people choose whatever they expect by +# setting umask. +# +# We cannot accept any implementation of `mkdir' that recognizes `-p'. +# Some implementations (such as Solaris 8's) are not thread-safe: if a +# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' +# concurrently, both version can detect that a/ is missing, but only +# one can create it and the other will error out. Consequently we +# restrict ourselves to GNU make (using the --version option ensures +# this.) +AC_DEFUN([AM_PROG_MKDIR_P], +[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in + # $(mkdir_p) $(somedir) + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' +else + # On NextStep and OpenStep, the `mkdir' command does not + # recognize any option. It will interpret all options as + # directories to create, and then abort because `.' already + # exists. + for d in ./-p ./--version; + do + test -d $d && rmdir $d + done + # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. + if test -f "$ac_aux_dir/mkinstalldirs"; then + mkdir_p='$(mkinstalldirs)' + else + mkdir_p='$(install_sh) -d' + fi fi -ifelse([$3],, -AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) -AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])) -AC_REQUIRE([AM_SANITY_CHECK]) -AC_REQUIRE([AC_ARG_PROGRAM]) -dnl FIXME This is truly gross. -missing_dir=`cd $ac_aux_dir && pwd` -AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}, $missing_dir) -AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) -AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}, $missing_dir) -AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) -AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) -AC_REQUIRE([AC_PROG_MAKE_SET])]) - -# Copyright 2002 Free Software Foundation, Inc. +AC_SUBST([mkdir_p])]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -932,42 +844,77 @@ AC_REQUIRE([AC_PROG_MAKE_SET])]) # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. -# AM_AUTOMAKE_VERSION(VERSION) -# ---------------------------- -# Automake X.Y traces this macro to ensure aclocal.m4 has been -# generated from the m4 files accompanying Automake X.Y. -AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.4"]) +# serial 2 -# AM_SET_CURRENT_AUTOMAKE_VERSION -# ------------------------------- -# Call AM_AUTOMAKE_VERSION so it can be traced. -# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. -AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], - [AM_AUTOMAKE_VERSION([1.4-p6])]) +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# ------------------------------ +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) + +# _AM_SET_OPTIONS(OPTIONS) +# ---------------------------------- +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # # Check to make sure that the build environment is sane. # +# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 3 + +# AM_SANITY_CHECK +# --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 -echo timestamp > conftestfile +echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( - set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` - if test "[$]*" = "X"; then + set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + if test "$[*]" = "X"; then # -L didn't work. - set X `ls -t $srcdir/configure conftestfile` + set X `ls -t $srcdir/configure conftest.file` fi - if test "[$]*" != "X $srcdir/configure conftestfile" \ - && test "[$]*" != "X conftestfile $srcdir/configure"; then + rm -f conftest.file + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a @@ -977,7 +924,7 @@ if ( alias in your environment]) fi - test "[$]2" = conftestfile + test "$[2]" = conftest.file ) then # Ok. @@ -986,78 +933,153 @@ else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi -rm -f conftest* AC_MSG_RESULT(yes)]) -dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) -dnl The program must properly implement --version. -AC_DEFUN([AM_MISSING_PROG], -[AC_MSG_CHECKING(for working $2) -# Run test in a subshell; some versions of sh will print an error if -# an executable is not found, even if stderr is redirected. -# Redirect stdin to placate older versions of autoconf. Sigh. -if ($2 --version) < /dev/null > /dev/null 2>&1; then - $1=$2 - AC_MSG_RESULT(found) -else - $1="$3/missing $2" - AC_MSG_RESULT(missing) +# AM_PROG_INSTALL_STRIP + +# Copyright (C) 2001, 2003 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# One issue with vendor `install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in `make install-strip', and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be `maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) fi -AC_SUBST($1)]) +INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) -# Like AC_CONFIG_HEADER, but automatically create stamp file. - -AC_DEFUN([AM_CONFIG_HEADER], -[AC_PREREQ([2.12]) -AC_CONFIG_HEADER([$1]) -dnl When config.status generates a header, we must update the stamp-h file. -dnl This file resides in the same directory as the config header -dnl that is generated. We must strip everything past the first ":", -dnl and everything past the last "/". -AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl -ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>, -<>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>, -<>; do - case " <<$>>CONFIG_HEADERS " in - *" <<$>>am_file "*<<)>> - echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx - ;; - esac - am_indx=`expr "<<$>>am_indx" + 1` -done<<>>dnl>>) -changequote([,]))]) +# Check how to create a tarball. -*- Autoconf -*- -# Add --enable-maintainer-mode option to configure. -# From Jim Meyering +# Copyright (C) 2004 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. # serial 1 -AC_DEFUN([AM_MAINTAINER_MODE], -[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) - dnl maintainer-mode is disabled by default - AC_ARG_ENABLE(maintainer-mode, -[ --enable-maintainer-mode enable make rules and dependencies not useful - (and sometimes confusing) to the casual installer], - USE_MAINTAINER_MODE=$enableval, - USE_MAINTAINER_MODE=no) - AC_MSG_RESULT($USE_MAINTAINER_MODE) - AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes) - MAINT=$MAINTAINER_MODE_TRUE - AC_SUBST(MAINT)dnl -] -) -# Define a conditional. +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of `v7', `ustar', or `pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. +AM_MISSING_PROG([AMTAR], [tar]) +m4_if([$1], [v7], + [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of `-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac -AC_DEFUN([AM_CONDITIONAL], -[AC_SUBST($1_TRUE) -AC_SUBST($1_FALSE) -if $2; then - $1_TRUE= - $1_FALSE='#' -else - $1_TRUE='#' - $1_FALSE= -fi]) + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR +m4_include([acinclude.m4]) diff --git a/opcodes/configure b/opcodes/configure index 26eaf59..c803c94 100755 --- a/opcodes/configure +++ b/opcodes/configure @@ -309,7 +309,7 @@ ac_includes_default="\ # include #endif" -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO SET_MAKE AR ac_ct_AR RANLIB ac_ct_RANLIB LN_S STRIP ac_ct_STRIP LIBTOOL WARN_CFLAGS MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT INSTALL_LIBBFD_TRUE INSTALL_LIBBFD_FALSE host_noncanonical target_noncanonical bfdlibdir bfdincludedir CPP EGREP ALLOCA USE_NLS MSGFMT GMSGFMT XGETTEXT USE_INCLUDED_LIBINTL CATALOGS CATOBJEXT DATADIRNAME GMOFILES INSTOBJEXT INTLDEPS INTLLIBS INTLOBJS POFILES POSUB INCLUDE_LOCALE_H GT_NO GT_YES MKINSTALLDIRS l CC_FOR_BUILD EXEEXT_FOR_BUILD HDEFINES CGEN_MAINT_TRUE CGEN_MAINT_FALSE cgendir WIN32LDFLAGS WIN32LIBADD archdefs BFD_MACHINES LIBOBJS LTLIBOBJS' +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE AR ac_ct_AR RANLIB ac_ct_RANLIB LN_S LIBTOOL WARN_CFLAGS MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT INSTALL_LIBBFD_TRUE INSTALL_LIBBFD_FALSE host_noncanonical target_noncanonical bfdlibdir bfdincludedir CPP EGREP ALLOCA USE_NLS MSGFMT GMSGFMT XGETTEXT USE_INCLUDED_LIBINTL CATALOGS CATOBJEXT DATADIRNAME GMOFILES INSTOBJEXT INTLDEPS INTLLIBS INTLOBJS POFILES POSUB INCLUDE_LOCALE_H GT_NO GT_YES MKINSTALLDIRS l CC_FOR_BUILD EXEEXT_FOR_BUILD HDEFINES CGEN_MAINT_TRUE CGEN_MAINT_FALSE cgendir WIN32LDFLAGS WIN32LIBADD archdefs BFD_MACHINES LIBOBJS LTLIBOBJS' ac_subst_files='' # Initialize some variables set by options. @@ -850,6 +850,8 @@ if test -n "$ac_init_help"; then Optional Features: --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors --enable-shared=PKGS build shared libraries default=no --enable-static=PKGS build static libraries default=yes --enable-fast-install=PKGS optimize for fast installation default=yes @@ -857,8 +859,8 @@ Optional Features: --enable-targets alternative target configurations --enable-commonbfdlib build shared BFD/opcodes/libiberty library --enable-build-warnings Enable build-time compiler warnings if gcc is used - --enable-maintainer-mode enable make rules and dependencies not useful - (and sometimes confusing) to the casual installer + --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer --enable-install-libbfd controls installation of libbfd and related headers --disable-nls do not use Native Language Support --enable-cgen-maint=dir build cgen generated files @@ -970,7 +972,7 @@ esac else echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi - cd "$ac_popdir" + cd $ac_popdir done fi @@ -1994,7 +1996,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -2052,7 +2055,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -2168,7 +2172,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -2222,7 +2227,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -2267,7 +2273,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -2311,7 +2318,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -2351,14 +2359,13 @@ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $ ac_compiler_gnu=$ac_cv_c_compiler_gnu - - echo "$as_me:$LINENO: checking for strerror in -lcposix" >&5 -echo $ECHO_N "checking for strerror in -lcposix... $ECHO_C" >&6 -if test "${ac_cv_lib_cposix_strerror+set}" = set; then +echo "$as_me:$LINENO: checking for library containing strerror" >&5 +echo $ECHO_N "checking for library containing strerror... $ECHO_C" >&6 +if test "${ac_cv_search_strerror+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lcposix $LIBS" + ac_func_search_save_LIBS=$LIBS +ac_cv_search_strerror=no cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF @@ -2390,7 +2397,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -2402,24 +2410,80 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ac_status=$? echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then - ac_cv_lib_cposix_strerror=yes + ac_cv_search_strerror="none required" else echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -ac_cv_lib_cposix_strerror=no fi rm -f conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS +if test "$ac_cv_search_strerror" = no; then + for ac_lib in cposix; do + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char strerror (); +int +main () +{ +strerror (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_search_strerror="-l$ac_lib" +break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + fi -echo "$as_me:$LINENO: result: $ac_cv_lib_cposix_strerror" >&5 -echo "${ECHO_T}$ac_cv_lib_cposix_strerror" >&6 -if test $ac_cv_lib_cposix_strerror = yes; then - LIBS="$LIBS -lcposix" +rm -f conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + done fi +LIBS=$ac_func_search_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_search_strerror" >&5 +echo "${ECHO_T}$ac_cv_search_strerror" >&6 +if test "$ac_cv_search_strerror" != no; then + test "$ac_cv_search_strerror" = "none required" || LIBS="$ac_cv_search_strerror $LIBS" - +fi # We currently only use the version number for the name of any shared @@ -2427,7 +2491,7 @@ fi # number that BFD is using. BFD_VERSION=`sed -n -e 's/^.._INIT_AUTOMAKE.*,[ ]*\([^ ]*\)[ ]*).*/\1/p' < ${srcdir}/../bfd/configure.in` -am__api_version="1.4" +am__api_version="1.9" # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: @@ -2511,20 +2575,21 @@ echo "$as_me:$LINENO: checking whether build environment is sane" >&5 echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 # Just in case sleep 1 -echo timestamp > conftestfile +echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( - set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` + set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. - set X `ls -t $srcdir/configure conftestfile` + set X `ls -t $srcdir/configure conftest.file` fi - if test "$*" != "X $srcdir/configure conftestfile" \ - && test "$*" != "X conftestfile $srcdir/configure"; then + rm -f conftest.file + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a @@ -2537,7 +2602,7 @@ alias in your environment" >&2;} { (exit 1); exit 1; }; } fi - test "$2" = conftestfile + test "$2" = conftest.file ) then # Ok. @@ -2549,7 +2614,6 @@ echo "$as_me: error: newly created file is older than distributed files! Check your system clock" >&2;} { (exit 1); exit 1; }; } fi -rm -f conftest* echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 test "$program_prefix" != NONE && @@ -2565,6 +2629,92 @@ _ACEOF program_transform_name=`echo $program_transform_name | sed -f conftest.sed` rm conftest.sed +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` + +test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 +echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} +fi + +if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in + # $(mkdir_p) $(somedir) + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' +else + # On NextStep and OpenStep, the `mkdir' command does not + # recognize any option. It will interpret all options as + # directories to create, and then abort because `.' already + # exists. + for d in ./-p ./--version; + do + test -d $d && rmdir $d + done + # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. + if test -f "$ac_aux_dir/mkinstalldirs"; then + mkdir_p='$(mkinstalldirs)' + else + mkdir_p='$(install_sh) -d' + fi +fi + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_AWK+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AWK="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + echo "$as_me:$LINENO: result: $AWK" >&5 +echo "${ECHO_T}$AWK" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$AWK" && break +done + echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` @@ -2594,17 +2744,103 @@ echo "${ECHO_T}no" >&6 SET_MAKE="MAKE=${MAKE-make}" fi +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +DEPDIR="${am__leading_dot}deps" + + ac_config_commands="$ac_config_commands depfiles" + + +am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo done +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 +echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# We grep out `Entering directory' and `Leaving directory' +# messages which can occur if `w' ends up in MAKEFLAGS. +# In particular we don't look at `^make:' because GNU make might +# be invoked under some other name (usually "gmake"), in which +# case it prints its new name instead of `make'. +if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then + am__include=include + am__quote= + _am_result=GNU +fi +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then + am__include=.include + am__quote="\"" + _am_result=BSD + fi +fi + + +echo "$as_me:$LINENO: result: $_am_result" >&5 +echo "${ECHO_T}$_am_result" >&6 +rm -f confinc confmf + +# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then + enableval="$enable_dependency_tracking" + +fi; +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' +fi + + +if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi -PACKAGE=opcodes -VERSION=${BFD_VERSION} -if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then +# test to see if srcdir already configured +if test "`cd $srcdir && pwd`" != "`pwd`" && + test -f $srcdir/config.status; then { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} { (exit 1); exit 1; }; } fi +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi + + +# Define the identity of the package. + PACKAGE=opcodes + VERSION=${BFD_VERSION} + + cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF @@ -2614,86 +2850,234 @@ cat >>confdefs.h <<_ACEOF #define VERSION "$VERSION" _ACEOF +# Some tools Automake needs. +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} -missing_dir=`cd $ac_aux_dir && pwd` -echo "$as_me:$LINENO: checking for working aclocal-${am__api_version}" >&5 -echo $ECHO_N "checking for working aclocal-${am__api_version}... $ECHO_C" >&6 -# Run test in a subshell; some versions of sh will print an error if -# an executable is not found, even if stderr is redirected. -# Redirect stdin to placate older versions of autoconf. Sigh. -if (aclocal-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then - ACLOCAL=aclocal-${am__api_version} - echo "$as_me:$LINENO: result: found" >&5 -echo "${ECHO_T}found" >&6 + +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +install_sh=${install_sh-"$am_aux_dir/install-sh"} + +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + echo "$as_me:$LINENO: result: $STRIP" >&5 +echo "${ECHO_T}$STRIP" >&6 else - ACLOCAL="$missing_dir/missing aclocal-${am__api_version}" - echo "$as_me:$LINENO: result: missing" >&5 -echo "${ECHO_T}missing" >&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi -echo "$as_me:$LINENO: checking for working autoconf" >&5 -echo $ECHO_N "checking for working autoconf... $ECHO_C" >&6 -# Run test in a subshell; some versions of sh will print an error if -# an executable is not found, even if stderr is redirected. -# Redirect stdin to placate older versions of autoconf. Sigh. -if (autoconf --version) < /dev/null > /dev/null 2>&1; then - AUTOCONF=autoconf - echo "$as_me:$LINENO: result: found" >&5 -echo "${ECHO_T}found" >&6 +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +echo "${ECHO_T}$ac_ct_STRIP" >&6 else - AUTOCONF="$missing_dir/missing autoconf" - echo "$as_me:$LINENO: result: missing" >&5 -echo "${ECHO_T}missing" >&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi -echo "$as_me:$LINENO: checking for working automake-${am__api_version}" >&5 -echo $ECHO_N "checking for working automake-${am__api_version}... $ECHO_C" >&6 -# Run test in a subshell; some versions of sh will print an error if -# an executable is not found, even if stderr is redirected. -# Redirect stdin to placate older versions of autoconf. Sigh. -if (automake-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then - AUTOMAKE=automake-${am__api_version} - echo "$as_me:$LINENO: result: found" >&5 -echo "${ECHO_T}found" >&6 + STRIP=$ac_ct_STRIP else - AUTOMAKE="$missing_dir/missing automake-${am__api_version}" - echo "$as_me:$LINENO: result: missing" >&5 -echo "${ECHO_T}missing" >&6 + STRIP="$ac_cv_prog_STRIP" fi -echo "$as_me:$LINENO: checking for working autoheader" >&5 -echo $ECHO_N "checking for working autoheader... $ECHO_C" >&6 -# Run test in a subshell; some versions of sh will print an error if -# an executable is not found, even if stderr is redirected. -# Redirect stdin to placate older versions of autoconf. Sigh. -if (autoheader --version) < /dev/null > /dev/null 2>&1; then - AUTOHEADER=autoheader - echo "$as_me:$LINENO: result: found" >&5 -echo "${ECHO_T}found" >&6 +fi +INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" + +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +# Always define AMTAR for backward compatibility. + +AMTAR=${AMTAR-"${am_missing_run}tar"} + +am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' + + + + +depcc="$CC" am_compiler_list= + +echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 +if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - AUTOHEADER="$missing_dir/missing autoheader" - echo "$as_me:$LINENO: result: missing" >&5 -echo "${ECHO_T}missing" >&6 + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + case $depmode in + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + none) break ;; + esac + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. + if depmode=$depmode \ + source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi + fi +echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 +echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + -echo "$as_me:$LINENO: checking for working makeinfo" >&5 -echo $ECHO_N "checking for working makeinfo... $ECHO_C" >&6 -# Run test in a subshell; some versions of sh will print an error if -# an executable is not found, even if stderr is redirected. -# Redirect stdin to placate older versions of autoconf. Sigh. -if (makeinfo --version) < /dev/null > /dev/null 2>&1; then - MAKEINFO=makeinfo - echo "$as_me:$LINENO: result: found" >&5 -echo "${ECHO_T}found" >&6 +if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' else - MAKEINFO="$missing_dir/missing makeinfo" - echo "$as_me:$LINENO: result: missing" >&5 -echo "${ECHO_T}missing" >&6 + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= fi + if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. set dummy ${ac_tool_prefix}ar; ac_word=$2 @@ -3594,7 +3978,7 @@ test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic" case $host in *-*-irix6*) # Find out which ABI we are using. - echo '#line 3597 "configure"' > conftest.$ac_ext + echo '#line 3981 "configure"' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? @@ -3690,7 +4074,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -3878,11 +4263,8 @@ if test "x${build_warnings}" != x -a "x$GCC" = xyes ; then fi - ac_config_headers="$ac_config_headers config.h:config.in" - ac_config_commands="$ac_config_commands default-1" - if test -z "$target" ; then { { echo "$as_me:$LINENO: error: Unrecognized target system type; please check config.sub." >&5 @@ -3910,6 +4292,7 @@ else MAINTAINER_MODE_TRUE='#' MAINTAINER_MODE_FALSE= fi + MAINT=$MAINTAINER_MODE_TRUE @@ -3952,6 +4335,7 @@ else INSTALL_LIBBFD_TRUE='#' INSTALL_LIBBFD_FALSE= fi + # Need _noncanonical variables for this. @@ -4339,7 +4723,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4397,7 +4782,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4513,7 +4899,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4567,7 +4954,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4612,7 +5000,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -4656,7 +5045,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5060,7 +5450,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5267,7 +5658,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5327,7 +5719,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5406,7 +5799,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5471,7 +5865,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5536,7 +5931,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5600,7 +5996,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5681,7 +6078,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5822,7 +6220,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -5960,7 +6359,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6144,7 +6544,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6395,7 +6796,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6589,7 +6991,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6692,7 +7095,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6763,7 +7167,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -6865,7 +7270,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7001,7 +7407,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7065,7 +7472,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7120,7 +7528,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7260,7 +7669,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7393,7 +7803,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7661,7 +8072,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -7971,7 +8383,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 cat conftest.err >&5 echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' + { ac_try='test -z "$ac_c_werror_flag" + || test ! -s conftest.err' { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 (eval $ac_try) 2>&5 ac_status=$? @@ -8115,6 +8528,7 @@ else fi + using_cgen=no # Horrible hacks to build DLLs on Windows. @@ -8388,6 +8802,41 @@ LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +echo "$as_me: error: conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then + { { echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${INSTALL_LIBBFD_TRUE}" && test -z "${INSTALL_LIBBFD_FALSE}"; then + { { echo "$as_me:$LINENO: error: conditional \"INSTALL_LIBBFD\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +echo "$as_me: error: conditional \"INSTALL_LIBBFD\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${CGEN_MAINT_TRUE}" && test -z "${CGEN_MAINT_FALSE}"; then + { { echo "$as_me:$LINENO: error: conditional \"CGEN_MAINT\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +echo "$as_me: error: conditional \"CGEN_MAINT\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi : ${CONFIG_STATUS=./config.status} ac_clean_files_save=$ac_clean_files @@ -8821,7 +9270,7 @@ cat >>$CONFIG_STATUS <<_ACEOF # INIT-COMMANDS section. # - +AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" _ACEOF @@ -8835,7 +9284,7 @@ do # Handling of arguments. "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; "po/Makefile.in" ) CONFIG_FILES="$CONFIG_FILES po/Makefile.in:po/Make-in" ;; - "default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;; + "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "default" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;; "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h:config.in" ;; *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 @@ -8945,6 +9394,7 @@ s,@OBJEXT@,$OBJEXT,;t t s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t s,@INSTALL_DATA@,$INSTALL_DATA,;t t +s,@CYGPATH_W@,$CYGPATH_W,;t t s,@PACKAGE@,$PACKAGE,;t t s,@VERSION@,$VERSION,;t t s,@ACLOCAL@,$ACLOCAL,;t t @@ -8952,14 +9402,31 @@ s,@AUTOCONF@,$AUTOCONF,;t t s,@AUTOMAKE@,$AUTOMAKE,;t t s,@AUTOHEADER@,$AUTOHEADER,;t t s,@MAKEINFO@,$MAKEINFO,;t t +s,@install_sh@,$install_sh,;t t +s,@STRIP@,$STRIP,;t t +s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t +s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t +s,@mkdir_p@,$mkdir_p,;t t +s,@AWK@,$AWK,;t t s,@SET_MAKE@,$SET_MAKE,;t t +s,@am__leading_dot@,$am__leading_dot,;t t +s,@AMTAR@,$AMTAR,;t t +s,@am__tar@,$am__tar,;t t +s,@am__untar@,$am__untar,;t t +s,@DEPDIR@,$DEPDIR,;t t +s,@am__include@,$am__include,;t t +s,@am__quote@,$am__quote,;t t +s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t +s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t +s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t +s,@CCDEPMODE@,$CCDEPMODE,;t t +s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t +s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t s,@AR@,$AR,;t t s,@ac_ct_AR@,$ac_ct_AR,;t t s,@RANLIB@,$RANLIB,;t t s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t s,@LN_S@,$LN_S,;t t -s,@STRIP@,$STRIP,;t t -s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t s,@LIBTOOL@,$LIBTOOL,;t t s,@WARN_CFLAGS@,$WARN_CFLAGS,;t t s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t @@ -9172,6 +9639,11 @@ esac *) ac_INSTALL=$ac_top_builddir$INSTALL ;; esac + if test x"$ac_file" != x-; then + { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + rm -f "$ac_file" + fi # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ @@ -9210,12 +9682,6 @@ echo "$as_me: error: cannot find input file: $f" >&2;} fi;; esac done` || { (exit 1); exit 1; } - - if test x"$ac_file" != x-; then - { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - rm -f "$ac_file" - fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF sed "$ac_vpsub @@ -9466,6 +9932,28 @@ echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} cat $tmp/config.h rm -f $tmp/config.h fi +# Compute $ac_file's index in $config_headers. +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $ac_file | $ac_file:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null || +$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X$ac_file : 'X\(//\)[^/]' \| \ + X$ac_file : 'X\(//\)$' \| \ + X$ac_file : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X$ac_file | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'`/stamp-h$_am_stamp_count done _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF @@ -9582,7 +10070,91 @@ esac { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 echo "$as_me: executing $ac_dest commands" >&6;} case $ac_dest in - default-1 ) test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h ;; + depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # So let's grep whole file. + if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then + dirpart=`(dirname "$mf") 2>/dev/null || +$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ + X"$mf" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`(dirname "$file") 2>/dev/null || +$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ + X"$file" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p $dirpart/$fdir + else + as_dir=$dirpart/$fdir + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5 +echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} + { (exit 1); exit 1; }; }; } + + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done +done + ;; default ) sed -e '/POTFILES =/r po/POTFILES' po/Makefile.in > po/Makefile ;; esac done diff --git a/opcodes/po/POTFILES.in b/opcodes/po/POTFILES.in index 333c612..e71ddce 100644 --- a/opcodes/po/POTFILES.in +++ b/opcodes/po/POTFILES.in @@ -12,6 +12,8 @@ cgen-dis.c cgen-opc.c cris-dis.c cris-opc.c +crx-dis.c +crx-opc.c d10v-dis.c d10v-opc.c d30v-dis.c diff --git a/opcodes/po/opcodes.pot b/opcodes/po/opcodes.pot index 9ab8790..f149ddb 100644 --- a/opcodes/po/opcodes.pot +++ b/opcodes/po/opcodes.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2004-03-19 14:59+1030\n" +"POT-Creation-Date: 2004-09-16 23:00+0930\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -94,14 +94,14 @@ msgstr "" msgid "Address 0x%x is out of bounds.\n" msgstr "" -#: fr30-asm.c:323 frv-asm.c:967 ip2k-asm.c:574 iq2000-asm.c:460 m32r-asm.c:335 +#: fr30-asm.c:323 frv-asm.c:967 ip2k-asm.c:574 iq2000-asm.c:460 m32r-asm.c:338 #: openrisc-asm.c:261 xstormy16-asm.c:284 #, c-format msgid "Unrecognized field %d while parsing.\n" msgstr "" #: fr30-asm.c:372 frv-asm.c:1016 ip2k-asm.c:623 iq2000-asm.c:509 -#: m32r-asm.c:384 openrisc-asm.c:310 xstormy16-asm.c:333 +#: m32r-asm.c:387 openrisc-asm.c:310 xstormy16-asm.c:333 msgid "missing mnemonic in syntax string" msgstr "" @@ -109,43 +109,43 @@ msgstr "" #: fr30-asm.c:507 fr30-asm.c:511 fr30-asm.c:598 fr30-asm.c:699 frv-asm.c:1151 #: frv-asm.c:1155 frv-asm.c:1242 frv-asm.c:1343 ip2k-asm.c:758 ip2k-asm.c:762 #: ip2k-asm.c:849 ip2k-asm.c:950 iq2000-asm.c:644 iq2000-asm.c:648 -#: iq2000-asm.c:735 iq2000-asm.c:836 m32r-asm.c:519 m32r-asm.c:523 -#: m32r-asm.c:610 m32r-asm.c:711 openrisc-asm.c:445 openrisc-asm.c:449 +#: iq2000-asm.c:735 iq2000-asm.c:836 m32r-asm.c:522 m32r-asm.c:526 +#: m32r-asm.c:613 m32r-asm.c:714 openrisc-asm.c:445 openrisc-asm.c:449 #: openrisc-asm.c:536 openrisc-asm.c:637 xstormy16-asm.c:468 #: xstormy16-asm.c:472 xstormy16-asm.c:559 xstormy16-asm.c:660 msgid "unrecognized instruction" msgstr "" #: fr30-asm.c:554 frv-asm.c:1198 ip2k-asm.c:805 iq2000-asm.c:691 -#: m32r-asm.c:566 openrisc-asm.c:492 xstormy16-asm.c:515 +#: m32r-asm.c:569 openrisc-asm.c:492 xstormy16-asm.c:515 #, c-format msgid "syntax error (expected char `%c', found `%c')" msgstr "" #: fr30-asm.c:564 frv-asm.c:1208 ip2k-asm.c:815 iq2000-asm.c:701 -#: m32r-asm.c:576 openrisc-asm.c:502 xstormy16-asm.c:525 +#: m32r-asm.c:579 openrisc-asm.c:502 xstormy16-asm.c:525 #, c-format msgid "syntax error (expected char `%c', found end of instruction)" msgstr "" #: fr30-asm.c:592 frv-asm.c:1236 ip2k-asm.c:843 iq2000-asm.c:729 -#: m32r-asm.c:604 openrisc-asm.c:530 xstormy16-asm.c:553 +#: m32r-asm.c:607 openrisc-asm.c:530 xstormy16-asm.c:553 msgid "junk at end of line" msgstr "" #: fr30-asm.c:698 frv-asm.c:1342 ip2k-asm.c:949 iq2000-asm.c:835 -#: m32r-asm.c:710 openrisc-asm.c:636 xstormy16-asm.c:659 +#: m32r-asm.c:713 openrisc-asm.c:636 xstormy16-asm.c:659 msgid "unrecognized form of instruction" msgstr "" #: fr30-asm.c:710 frv-asm.c:1354 ip2k-asm.c:961 iq2000-asm.c:847 -#: m32r-asm.c:722 openrisc-asm.c:648 xstormy16-asm.c:671 +#: m32r-asm.c:725 openrisc-asm.c:648 xstormy16-asm.c:671 #, c-format msgid "bad instruction `%.50s...'" msgstr "" #: fr30-asm.c:713 frv-asm.c:1357 ip2k-asm.c:964 iq2000-asm.c:850 -#: m32r-asm.c:725 openrisc-asm.c:651 xstormy16-asm.c:674 +#: m32r-asm.c:728 openrisc-asm.c:651 xstormy16-asm.c:674 #, c-format msgid "bad instruction `%.50s'" msgstr "" @@ -219,7 +219,7 @@ msgstr "" msgid "Hmmmm 0x%x" msgstr "" -#: h8300-dis.c:741 +#: h8300-dis.c:744 #, c-format msgid "Don't understand 0x%x \n" msgstr "" @@ -230,12 +230,12 @@ msgid "can't cope with insert %d\n" msgstr "" #. Couldn't understand anything. -#: h8500-dis.c:350 +#: h8500-dis.c:342 #, c-format msgid "%02x\t\t*unknown*" msgstr "" -#: i386-dis.c:1712 +#: i386-dis.c:1720 msgid "" msgstr "" @@ -275,72 +275,72 @@ msgstr "" msgid "overlapping field %s->%s\n" msgstr "" -#: ia64-gen.c:1236 +#: ia64-gen.c:1242 #, c-format msgid "overwriting note %d with note %d (IC:%s)\n" msgstr "" -#: ia64-gen.c:1435 +#: ia64-gen.c:1441 #, c-format msgid "don't know how to specify %% dependency %s\n" msgstr "" -#: ia64-gen.c:1457 +#: ia64-gen.c:1463 #, c-format msgid "Don't know how to specify # dependency %s\n" msgstr "" -#: ia64-gen.c:1496 +#: ia64-gen.c:1502 #, c-format msgid "IC:%s [%s] has no terminals or sub-classes\n" msgstr "" -#: ia64-gen.c:1499 +#: ia64-gen.c:1505 #, c-format msgid "IC:%s has no terminals or sub-classes\n" msgstr "" -#: ia64-gen.c:1508 +#: ia64-gen.c:1514 #, c-format msgid "no insns mapped directly to terminal IC %s [%s]" msgstr "" -#: ia64-gen.c:1511 +#: ia64-gen.c:1517 #, c-format msgid "no insns mapped directly to terminal IC %s\n" msgstr "" -#: ia64-gen.c:1522 +#: ia64-gen.c:1528 #, c-format msgid "class %s is defined but not used\n" msgstr "" -#: ia64-gen.c:1533 +#: ia64-gen.c:1539 #, c-format msgid "Warning: rsrc %s (%s) has no chks%s\n" msgstr "" -#: ia64-gen.c:1537 +#: ia64-gen.c:1543 #, c-format msgid "rsrc %s (%s) has no regs\n" msgstr "" -#: ia64-gen.c:2436 +#: ia64-gen.c:2442 #, c-format msgid "IC note %d in opcode %s (IC:%s) conflicts with resource %s note %d\n" msgstr "" -#: ia64-gen.c:2464 +#: ia64-gen.c:2470 #, c-format msgid "IC note %d for opcode %s (IC:%s) conflicts with resource %s note %d\n" msgstr "" -#: ia64-gen.c:2478 +#: ia64-gen.c:2484 #, c-format msgid "opcode %s has no class (ops %d %d %d)\n" msgstr "" -#: ia64-gen.c:2789 +#: ia64-gen.c:2795 #, c-format msgid "unable to change directory to \"%s\", errno = %s\n" msgstr "" @@ -430,12 +430,12 @@ msgstr "" msgid "unknown\t0x%04x" msgstr "" -#: m68k-dis.c:432 +#: m68k-dis.c:295 #, c-format msgid "\n" msgstr "" -#: m68k-dis.c:1025 +#: m68k-dis.c:1089 #, c-format msgid "" msgstr "" @@ -573,83 +573,87 @@ msgstr "" msgid "$" msgstr "" -#: ppc-opc.c:791 ppc-opc.c:819 +#: ppc-opc.c:794 ppc-opc.c:822 msgid "invalid conditional option" msgstr "" -#: ppc-opc.c:821 +#: ppc-opc.c:824 msgid "attempt to set y bit when using + or - modifier" msgstr "" -#: ppc-opc.c:849 +#: ppc-opc.c:852 msgid "offset not a multiple of 16" msgstr "" -#: ppc-opc.c:868 +#: ppc-opc.c:871 msgid "offset not a multiple of 2" msgstr "" -#: ppc-opc.c:870 +#: ppc-opc.c:873 msgid "offset greater than 62" msgstr "" -#: ppc-opc.c:889 ppc-opc.c:934 ppc-opc.c:978 +#: ppc-opc.c:892 ppc-opc.c:937 ppc-opc.c:981 msgid "offset not a multiple of 4" msgstr "" -#: ppc-opc.c:891 +#: ppc-opc.c:894 msgid "offset greater than 124" msgstr "" -#: ppc-opc.c:910 +#: ppc-opc.c:913 msgid "offset not a multiple of 8" msgstr "" -#: ppc-opc.c:912 +#: ppc-opc.c:915 msgid "offset greater than 248" msgstr "" -#: ppc-opc.c:955 +#: ppc-opc.c:958 msgid "offset not between -2048 and 2047" msgstr "" -#: ppc-opc.c:976 +#: ppc-opc.c:979 msgid "offset not between -8192 and 8191" msgstr "" -#: ppc-opc.c:1014 +#: ppc-opc.c:1007 +msgid "invalid mask field" +msgstr "" + +#: ppc-opc.c:1033 msgid "ignoring invalid mfcr mask" msgstr "" -#: ppc-opc.c:1061 +#: ppc-opc.c:1075 msgid "ignoring least significant bits in branch offset" msgstr "" -#: ppc-opc.c:1091 ppc-opc.c:1126 +#: ppc-opc.c:1105 ppc-opc.c:1140 msgid "illegal bitmask" msgstr "" -#: ppc-opc.c:1191 +#: ppc-opc.c:1205 msgid "value out of range" msgstr "" -#: ppc-opc.c:1259 +#: ppc-opc.c:1273 msgid "index register in load range" msgstr "" -#: ppc-opc.c:1275 +#: ppc-opc.c:1289 msgid "source and target register operands must be different" msgstr "" -#: ppc-opc.c:1290 +#: ppc-opc.c:1304 msgid "invalid register operand when updating" msgstr "" -#: ppc-opc.c:1329 +#: ppc-opc.c:1343 msgid "target register operand must be even" msgstr "" -#: ppc-opc.c:1343 +#: ppc-opc.c:1357 msgid "source register operand must be even" msgstr "" -- cgit v1.1