From 252b5132c753830d5fd56823373aed85f2a0db63 Mon Sep 17 00:00:00 2001
From: Richard Henderson <rth@redhat.com>
Date: Mon, 3 May 1999 07:29:11 +0000
Subject: 19990502 sourceware import

---
 ld/scripttempl/elfd10v.sc | 226 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 226 insertions(+)
 create mode 100644 ld/scripttempl/elfd10v.sc

(limited to 'ld/scripttempl/elfd10v.sc')

diff --git a/ld/scripttempl/elfd10v.sc b/ld/scripttempl/elfd10v.sc
new file mode 100644
index 0000000..322eef4
--- /dev/null
+++ b/ld/scripttempl/elfd10v.sc
@@ -0,0 +1,226 @@
+#
+# Unusual variables checked by this code:
+#	NOP - two byte opcode for no-op (defaults to 0)
+#	DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
+#	OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
+#		(e.g., .PARISC.milli)
+#	OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
+#		(e.g., .PARISC.global)
+#	OTHER_SECTIONS - at the end
+#	EXECUTABLE_SYMBOLS - symbols that must be defined for an
+#		executable (e.g., _DYNAMIC_LINK)
+#	TEXT_START_SYMBOLS - symbols that appear at the start of the
+#		.text section.
+#	DATA_START_SYMBOLS - symbols that appear at the start of the
+#		.data section.
+#	OTHER_BSS_SYMBOLS - symbols that appear at the start of the
+#		.bss section besides __bss_start.
+#	DATA_PLT - .plt should be in data segment, not text segment.
+#	EMBEDDED - whether this is for an embedded system. 
+#
+# When adding sections, do note that the names of some sections are used
+# when specifying the start address of the next.
+#
+test -z "$ENTRY" && ENTRY=_start
+test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
+test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
+if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
+test "$LD_FLAG" = "N" && DATA_ADDR=.
+INTERP=".interp   ${RELOCATING-0} : { *(.interp) 	}"
+PLT=".plt    ${RELOCATING-0} : { *(.plt)	}"
+
+
+CTOR=".ctors ${CONSTRUCTING-0} : 
+  {
+    ${CONSTRUCTING+${CTOR_START}}
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+
+    KEEP (*crtbegin.o(.ctors))
+
+    /* We don't want to include the .ctor section from
+       from the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+
+    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+    ${CONSTRUCTING+${CTOR_END}}
+  }"
+
+DTOR=" .dtors       ${CONSTRUCTING-0} :
+  {
+    ${CONSTRUCTING+${DTOR_START}}
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+    ${CONSTRUCTING+${DTOR_END}}
+  }"
+
+
+# if this is for an embedded system, don't add SIZEOF_HEADERS.
+if [ -z "$EMBEDDED" ]; then
+   test -z "${READONLY_BASE_ADDRESS}" && READONLY_BASE_ADDRESS="${READONLY_START_ADDR} + SIZEOF_HEADERS"
+else
+   test -z "${READONLY_BASE_ADDRESS}" && READONLY_BASE_ADDRESS="${READONLY_START_ADDR}"
+fi
+
+cat <<EOF
+OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
+	      "${LITTLE_OUTPUT_FORMAT}")
+OUTPUT_ARCH(${OUTPUT_ARCH})
+ENTRY(${ENTRY})
+
+${RELOCATING+${LIB_SEARCH_DIRS}}
+${RELOCATING+/* Do we need any of these for elf?
+   __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}}  */}
+${RELOCATING+${EXECUTABLE_SYMBOLS}}
+${RELOCATING- /* For some reason, the Solaris linker makes bad executables
+  if gld -r is used and the intermediate file has sections starting
+  at non-zero addresses.  Could be a Solaris ld bug, could be a GNU ld
+  bug.  But for now assigning the zero vmas works.  */}
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  ${CREATE_SHLIB-${RELOCATING+. = ${READONLY_BASE_ADDRESS};}}
+  ${CREATE_SHLIB+${RELOCATING+. = SIZEOF_HEADERS;}}
+  ${CREATE_SHLIB-${INTERP}}
+  .hash        ${RELOCATING-0} : { *(.hash)		}
+  .dynsym      ${RELOCATING-0} : { *(.dynsym)		}
+  .dynstr      ${RELOCATING-0} : { *(.dynstr)		}
+  .rel.text    ${RELOCATING-0} : { *(.rel.text)		}
+  .rela.text   ${RELOCATING-0} : { *(.rela.text) 	}
+  .rel.data    ${RELOCATING-0} : { *(.rel.data)		}
+  .rela.data   ${RELOCATING-0} : { *(.rela.data) 	}
+  .rel.rodata  ${RELOCATING-0} : { *(.rel.rodata) 	}
+  .rela.rodata ${RELOCATING-0} : { *(.rela.rodata) 	}
+  .rel.got     ${RELOCATING-0} : { *(.rel.got)		}
+  .rela.got    ${RELOCATING-0} : { *(.rela.got)		}
+  .rel.ctors   ${RELOCATING-0} : { *(.rel.ctors)	}
+  .rela.ctors  ${RELOCATING-0} : { *(.rela.ctors)	}
+  .rel.dtors   ${RELOCATING-0} : { *(.rel.dtors)	}
+  .rela.dtors  ${RELOCATING-0} : { *(.rela.dtors)	}
+  .rel.init    ${RELOCATING-0} : { *(.rel.init)	}
+  .rela.init   ${RELOCATING-0} : { *(.rela.init)	}
+  .rel.fini    ${RELOCATING-0} : { *(.rel.fini)	}
+  .rela.fini   ${RELOCATING-0} : { *(.rela.fini)	}
+  .rel.bss     ${RELOCATING-0} : { *(.rel.bss)		}
+  .rela.bss    ${RELOCATING-0} : { *(.rela.bss)		}
+  .rel.plt     ${RELOCATING-0} : { *(.rel.plt)		}
+  .rela.plt    ${RELOCATING-0} : { *(.rela.plt)		}
+  ${DATA_PLT-${PLT}}
+  .rodata  ${RELOCATING-0} : { *(.rodata) *(.gnu.linkonce.r*) }
+  .rodata1 ${RELOCATING-0} : { *(.rodata1) }
+  ${RELOCATING+${OTHER_READONLY_SECTIONS}}
+
+  /* Adjust the address for the data segment.  */
+  ${RELOCATING+. = ${DATA_ADDR-ALIGN(4);}}
+
+  .data  ${RELOCATING-0} :
+  {
+    ${RELOCATING+${DATA_START_SYMBOLS}}
+    *(.data)
+    *(.data.*)
+    *(.gnu.linkonce.d*)
+    ${CONSTRUCTING+CONSTRUCTORS}
+  }
+  .data1 ${RELOCATING-0} : { *(.data1) }
+  ${RELOCATING+${OTHER_READWRITE_SECTIONS}}
+  ${RELOCATING+${CTOR}}
+  ${RELOCATING+${DTOR}}
+  .got         ${RELOCATING-0} : { *(.got.plt) *(.got) }
+  .dynamic     ${RELOCATING-0} : { *(.dynamic) }
+  ${DATA_PLT+${PLT}}
+  /* We want the small data sections together, so single-instruction offsets
+     can access them all, and initialized data all before uninitialized, so
+     we can shorten the on-disk segment size.  */
+  .sdata   ${RELOCATING-0} : { *(.sdata) }
+  ${RELOCATING+_edata  =  .;}
+  ${RELOCATING+PROVIDE (edata = .);}
+  ${RELOCATING+__bss_start = .;}
+  ${RELOCATING+${OTHER_BSS_SYMBOLS}}
+  .sbss    ${RELOCATING-0} : { *(.sbss) *(.scommon) }
+  .bss     ${RELOCATING-0} :
+  {
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  ${RELOCATING+_end = . ;}
+  ${RELOCATING+PROVIDE (end = .);}
+
+  /* Stabs debugging sections.  */
+  .stab 0 : { *(.stab) }
+  .stabstr 0 : { *(.stabstr) }
+  .stab.excl 0 : { *(.stab.excl) }
+  .stab.exclstr 0 : { *(.stab.exclstr) }
+  .stab.index 0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+
+  .comment 0 : { *(.comment) }
+
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+
+  ${RELOCATING+${OTHER_RELOCATING_SECTIONS}}
+
+  /* These must appear regardless of ${RELOCATING}.  */
+  ${OTHER_SECTIONS}
+
+
+  /* Hmmm, there's got to be a better way.  This sets the stack to the
+     top of the simulator memory (i.e. top of 64K data space). */
+  .stack 0x00007FFE : { _stack = .; *(.stack) }
+
+  .text    ${RELOCATING+${TEXT_START_ADDR}} :
+  {
+    ${RELOCATING+${TEXT_START_SYMBOLS}}
+    KEEP (*(.init))
+    KEEP (*(.fini))
+    *(.text)
+    *(.text.*)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    *(.gnu.linkonce.t*)
+  } =${NOP-0}
+  ${RELOCATING+_etext = .;}
+  ${RELOCATING+PROVIDE (etext = .);}
+}
+EOF
-- 
cgit v1.1