From 7486c68d68b7b18836ca337723adb5e227711bf1 Mon Sep 17 00:00:00 2001 From: Stu Grossman Date: Thu, 20 Apr 1995 00:15:14 +0000 Subject: * hppa-tdep.c (deposit_17): New routine to deposit 17 bit constants into PA instructions. * Put #ifdefs around all signal handling code. Not generally needed for embedded boards. * (hppa_fix_call_dummy): Parameterize offsets into call dummy to allow different dummys to be used by this code. Use INSTRUCTION_SIZE instead of REGISTER_SIZE for things. Conditionalize setup of _sr4export fixup. Improve comments. * config/pa/tm-hppa.h: Define INSTRUCTION_SIZE. Use a different call dummy if PA_LEVEL_0 is defined. Better comments for call dummys. Define offsets for LDIL/LDO instructions which load function addresses. * config/pa/tm-pro.h: Get rid of signal handling stuff. Define PA_LEVEL_0 to disable mucking with space regs and such. --- gdb/ChangeLog | 25 ++++++++++++++ gdb/config/pa/tm-hppa.h | 73 ++++++++++++++++++++++++++++++++++----- gdb/config/pa/tm-pro.h | 45 ++---------------------- gdb/hppa-tdep.c | 91 ++++++++++++++++++++++++++++++++++--------------- 4 files changed, 157 insertions(+), 77 deletions(-) (limited to 'gdb') diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 53e1649..2dcfe69 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,28 @@ +Wed Apr 19 16:58:11 1995 Stu Grossman (grossman@andros.cygnus.com) + + * hppa-tdep.c (deposit_17): New routine to deposit 17 bit + constants into PA instructions. + * Put #ifdefs around all signal handling code. Not generally + needed for embedded boards. + * (hppa_fix_call_dummy): Parameterize offsets into call dummy to + allow different dummys to be used by this code. Use + INSTRUCTION_SIZE instead of REGISTER_SIZE for things. + Conditionalize setup of _sr4export fixup. Improve comments. + * config/pa/tm-hppa.h: Define INSTRUCTION_SIZE. Use a different + call dummy if PA_LEVEL_0 is defined. Better comments for call + dummys. Define offsets for LDIL/LDO instructions which load + function addresses. + * config/pa/tm-pro.h: Get rid of signal handling stuff. Define + PA_LEVEL_0 to disable mucking with space regs and such. + +Mon Apr 17 15:37:08 1995 Stu Grossman (grossman@andros.cygnus.com) + + * cpu32bug-rom.c monitor.h op50-rom.c remote-est.c rom68k-rom.c + w89k-rom.c: Remove loadtypes, loadprotos and baudrates. + * op50-rom.c: Fix copyrights and add load routine to op50n_cmds. + * rom68k-rom.c (_initialize_rom68k): Don't set baud rate. + * w89k-rom.c: Fix copyrights. + Sun Apr 16 14:00:55 1995 Stu Grossman (grossman@andros.cygnus.com) * monitor.c: Move all xmodem stuff into xmodem.[ch]. Remove diff --git a/gdb/config/pa/tm-hppa.h b/gdb/config/pa/tm-hppa.h index 3dc838d..e346f3a 100644 --- a/gdb/config/pa/tm-hppa.h +++ b/gdb/config/pa/tm-hppa.h @@ -149,17 +149,26 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ to be actual register numbers as far as the user is concerned but do serve to get the desired values when passed to read_register. */ +#define R0_REGNUM 0 /* Doesn't actually exist, used as base for + other r registers. */ #define FLAGS_REGNUM 0 /* Various status flags */ #define RP_REGNUM 2 /* return pointer */ #define FP_REGNUM 3 /* Contains address of executing stack */ /* frame */ #define SP_REGNUM 30 /* Contains address of top of stack */ -#define SAR_REGNUM 32 /* shift amount register */ -#define IPSW_REGNUM 41 /* processor status word. ? */ +#define SAR_REGNUM 32 /* Shift Amount Register */ +#define IPSW_REGNUM 41 /* Interrupt Processor Status Word */ #define PCOQ_HEAD_REGNUM 33 /* instruction offset queue head */ #define PCSQ_HEAD_REGNUM 34 /* instruction space queue head */ #define PCOQ_TAIL_REGNUM 35 /* instruction offset queue tail */ #define PCSQ_TAIL_REGNUM 36 /* instruction space queue tail */ +#define EIEM_REGNUM 37 /* External Interrupt Enable Mask */ +#define IIR_REGNUM 38 /* Interrupt Instruction Register */ +#define IOR_REGNUM 40 /* Interrupt Offset Register */ +#define SR4_REGNUM 43 /* space register 4 */ +#define RCR_REGNUM 51 /* Recover Counter (also known as cr0) */ +#define CCR_REGNUM 54 /* Coprocessor Configuration Register */ +#define TR0_REGNUM 57 /* Temporary Registers (cr24 -> cr31) */ #define FP0_REGNUM 64 /* floating point reg. 0 */ #define FP4_REGNUM 72 @@ -321,12 +330,19 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* Push an empty stack frame, to record the current PC, etc. */ -#define PUSH_DUMMY_FRAME push_dummy_frame () +#define PUSH_DUMMY_FRAME push_dummy_frame (&inf_status) /* Discard from the stack the innermost frame, restoring all saved registers. */ #define POP_FRAME hppa_pop_frame () +#define INSTRUCTION_SIZE 4 + +#ifndef PA_LEVEL_0 + +/* Non-level zero PA's have space registers (but they don't always have + floating-point, do they???? */ + /* This sequence of words is the instructions ; Call stack frame has already been built by gdb. Since we could be calling @@ -343,11 +359,11 @@ call_dummy fldds -4(0, r1), fr5 fldws -8(0, r1), fr6 fldds -12(0, r1), fr7 - ldil 0, r22 ; target will be placed here. - ldo 0(r22), r22 + ldil 0, r22 ; FUNC_LDIL_OFFSET must point here + ldo 0(r22), r22 ; FUNC_LDO_OFFSET must point here ldsid (0,r22), r4 - ldil 0, r1 ; _sr4export will be placed here. - ldo 0(r1), r1 + ldil 0, r1 ; SR4EXPORT_LDIL_OFFSET must point here + ldo 0(r1), r1 ; SR4EXPORT_LDO_OFFSET must point here ldsid (0,r1), r20 combt,=,n r4, r20, text_space ; If target is in data space, do a ble 0(sr5, r22) ; "normal" procedure call @@ -389,6 +405,14 @@ text_space ; Otherwise, go through _sr4export, avoid the kernel bug. The second NOP is needed to keep the call dummy 8 byte aligned. */ +/* Define offsets into the call dummy for the target function address */ +#define FUNC_LDIL_OFFSET (INSTRUCTION_SIZE * 9) +#define FUNC_LDO_OFFSET (INSTRUCTION_SIZE * 10) + +/* Define offsets into the call dummy for the _sr4export address */ +#define SR4EXPORT_LDIL_OFFSET (INSTRUCTION_SIZE * 12) +#define SR4EXPORT_LDO_OFFSET (INSTRUCTION_SIZE * 13) + #define CALL_DUMMY {0x4BDA3FB9, 0x4BD93FB1, 0x4BD83FA9, 0x4BD73FA1,\ 0x37C13FB9, 0x24201004, 0x2C391005, 0x24311006,\ 0x2C291007, 0x22C00000, 0x36D60000, 0x02C010A4,\ @@ -397,7 +421,39 @@ text_space ; Otherwise, go through _sr4export, 0xe6c00002, 0xe4202000, 0x6bdf3fd1, 0x00010004,\ 0x00151820, 0xe6c00002, 0x08000240, 0x08000240} -#define CALL_DUMMY_LENGTH 112 +#define CALL_DUMMY_LENGTH (INSTRUCTION_SIZE * 28) + +#else /* defined PA_LEVEL_0 */ + +/* This is the call dummy for a level 0 PA. Level 0's don't have space + registers (or floating point??), so we skip all that inter-space call stuff, + and avoid touching the fp regs. + +call_dummy + + ldw -36(%sp), %arg0 + ldw -40(%sp), %arg1 + ldw -44(%sp), %arg2 + ldw -48(%sp), %arg3 + ldil 0, %r31 ; FUNC_LDIL_OFFSET must point here + ldo 0(%r31), %r31 ; FUNC_LDO_OFFSET must point here + ble 0(0,%r31) + copy %r31, %r2 + break 4, 8 +*/ + +/* Define offsets into the call dummy for the target function address */ +#define FUNC_LDIL_OFFSET (INSTRUCTION_SIZE * 4) +#define FUNC_LDO_OFFSET (INSTRUCTION_SIZE * 5) + +#define CALL_DUMMY {0x4bda3fb9, 0x4bd93fb1, 0x4bd83fa9, 0x4bd73fa1,\ + 0x23e00000, 0x37ff0000, 0xe7e00000, 0x081f0242,\ + 0x00010004} + +#define CALL_DUMMY_LENGTH (INSTRUCTION_SIZE * 9) + +#endif + #define CALL_DUMMY_START_OFFSET 0 /* @@ -518,6 +574,7 @@ struct obj_unwind_info { extern CORE_ADDR target_read_pc PARAMS ((int)); extern void target_write_pc PARAMS ((CORE_ADDR, int)); +extern CORE_ADDR skip_trampoline_code PARAMS ((CORE_ADDR, char *)); #define TARGET_READ_PC(pid) target_read_pc (pid) #define TARGET_WRITE_PC(v,pid) target_write_pc (v,pid) diff --git a/gdb/config/pa/tm-pro.h b/gdb/config/pa/tm-pro.h index 97fb94a..59d825a 100644 --- a/gdb/config/pa/tm-pro.h +++ b/gdb/config/pa/tm-pro.h @@ -1,48 +1,9 @@ -/* Parameters for execution on an HP PA-RISC machine running a ROM monitor, - for GDB. This is based on tm-hppab.h. +/* Parameters for execution on an HP PA-RISC level 0 embedded system. + This is based on tm-hppab.h. Contributed by the Center for Software Science at the University of Utah (pa-gdb-bugs@cs.utah.edu). */ -/* For BSD: - - The signal context structure pointer is always saved at the base - of the frame + 0x4. - - We get the PC & SP directly from the sigcontext structure itself. - For other registers we have to dive in a little deeper: - - The hardware save state pointer is at offset 0x10 within the - signal context structure. - - Within the hardware save state, registers are found in the same order - as the register numbers in GDB. */ - -#define FRAME_SAVED_PC_IN_SIGTRAMP(FRAME, TMP) \ -{ \ - *(TMP) = read_memory_integer ((FRAME)->frame + 0x4, 4); \ - *(TMP) = read_memory_integer (*(TMP) + 0x18, 4); \ -} - -#define FRAME_BASE_BEFORE_SIGTRAMP(FRAME, TMP) \ -{ \ - *(TMP) = read_memory_integer ((FRAME)->frame + 0x4, 4); \ - *(TMP) = read_memory_integer (*(TMP) + 0x8, 4); \ -} - -#define FRAME_FIND_SAVED_REGS_IN_SIGTRAMP(FRAME, FSR) \ -{ \ - int i; \ - CORE_ADDR TMP; \ - TMP = read_memory_integer ((FRAME)->frame + 0x4, 4); \ - TMP = read_memory_integer (TMP + 0x10, 4); \ - for (i = 0; i < NUM_REGS; i++) \ - { \ - if (i == SP_REGNUM) \ - (FSR)->regs[SP_REGNUM] = read_memory_integer (TMP + SP_REGNUM * 4, 4); \ - else \ - (FSR)->regs[i] = TMP + i * 4; \ - } \ -} +#define PA_LEVEL_0 /* Disables touching space regs and fp */ /* It's mostly just the common stuff. */ #include "pa/tm-hppa.h" diff --git a/gdb/hppa-tdep.c b/gdb/hppa-tdep.c index 3187644..042a07f 100644 --- a/gdb/hppa-tdep.c +++ b/gdb/hppa-tdep.c @@ -251,6 +251,20 @@ extract_12 (word) (word & 0x1) << 11, 12) << 2; } +/* Deposit a 17 bit constant in an instruction (like bl). */ + +unsigned int +deposit_17 (opnd, word) + unsigned opnd, word; +{ + word |= GET_FIELD (opnd, 15 + 0, 15 + 0); /* w */ + word |= GET_FIELD (opnd, 15 + 1, 15 + 5) << 16; /* w1 */ + word |= GET_FIELD (opnd, 15 + 6, 15 + 6) << 2; /* w2[10] */ + word |= GET_FIELD (opnd, 15 + 7, 15 + 16) << 3; /* w2[0..9] */ + + return word; +} + /* extract a 17 bit constant from branch instructions, returning the 19 bit signed value. */ @@ -767,6 +781,7 @@ frame_saved_pc (frame) if (pc_in_interrupt_handler (pc)) return read_memory_integer (frame->frame + PC_REGNUM * 4, 4) & ~0x3; +#ifdef FRAME_SAVED_PC_IN_SIGTRAMP /* Deal with signal handler caller frames too. */ if (frame->signal_handler_caller) { @@ -774,6 +789,7 @@ frame_saved_pc (frame) FRAME_SAVED_PC_IN_SIGTRAMP (frame, &rp); return rp & ~0x3; } +#endif if (frameless_function_invocation (frame)) { @@ -931,10 +947,12 @@ frame_chain (frame) code to dig a saved PC out of the save state structure. */ if (pc_in_interrupt_handler (frame->pc)) frame_base = read_memory_integer (frame->frame + SP_REGNUM * 4, 4); +#ifdef FRAME_BASE_BEFORE_SIGTRAMP else if (frame->signal_handler_caller) { FRAME_BASE_BEFORE_SIGTRAMP (frame, &frame_base); } +#endif else frame_base = frame->frame; @@ -1389,7 +1407,7 @@ hppa_fix_call_dummy (dummy, pc, fun, nargs, args, type, gcc_p) struct type *type; int gcc_p; { - CORE_ADDR dyncall_addr, sr4export_addr; + CORE_ADDR dyncall_addr; struct minimal_symbol *msymbol; int flags = read_register (FLAGS_REGNUM); struct unwind_table_entry *u; @@ -1496,37 +1514,54 @@ hppa_fix_call_dummy (dummy, pc, fun, nargs, args, type, gcc_p) fun = new_fun; } - /* We still need sr4export's address too. */ - msymbol = lookup_minimal_symbol ("_sr4export", NULL, NULL); - if (msymbol == NULL) - error ("Can't find an address for _sr4export trampoline"); - - sr4export_addr = SYMBOL_VALUE_ADDRESS (msymbol); +/* Store upper 21 bits of function address into ldil */ store_unsigned_integer - (&dummy[9*REGISTER_SIZE], - REGISTER_SIZE, + (&dummy[FUNC_LDIL_OFFSET], + INSTRUCTION_SIZE, deposit_21 (fun >> 11, - extract_unsigned_integer (&dummy[9*REGISTER_SIZE], - REGISTER_SIZE))); + extract_unsigned_integer (&dummy[FUNC_LDIL_OFFSET], + INSTRUCTION_SIZE))); + +/* Store lower 11 bits of function address into ldo */ + store_unsigned_integer - (&dummy[10*REGISTER_SIZE], - REGISTER_SIZE, + (&dummy[FUNC_LDO_OFFSET], + INSTRUCTION_SIZE, deposit_14 (fun & MASK_11, - extract_unsigned_integer (&dummy[10*REGISTER_SIZE], - REGISTER_SIZE))); - store_unsigned_integer - (&dummy[12*REGISTER_SIZE], - REGISTER_SIZE, - deposit_21 (sr4export_addr >> 11, - extract_unsigned_integer (&dummy[12*REGISTER_SIZE], - REGISTER_SIZE))); - store_unsigned_integer - (&dummy[13*REGISTER_SIZE], - REGISTER_SIZE, - deposit_14 (sr4export_addr & MASK_11, - extract_unsigned_integer (&dummy[13*REGISTER_SIZE], - REGISTER_SIZE))); + extract_unsigned_integer (&dummy[FUNC_LDO_OFFSET], + INSTRUCTION_SIZE))); +#ifdef SR4EXPORT_LDIL_OFFSET + + { + CORE_ADDR sr4export_addr; + + /* We still need sr4export's address too. */ + + msymbol = lookup_minimal_symbol ("_sr4export", NULL, NULL); + if (msymbol == NULL) + error ("Can't find an address for _sr4export trampoline"); + + sr4export_addr = SYMBOL_VALUE_ADDRESS (msymbol); + +/* Store upper 21 bits of sr4export's address into ldil */ + + store_unsigned_integer + (&dummy[SR4EXPORT_LDIL_OFFSET], + INSTRUCTION_SIZE, + deposit_21 (sr4export_addr >> 11, + extract_unsigned_integer (&dummy[SR4EXPORT_LDIL_OFFSET], + INSTRUCTION_SIZE))); +/* Store lower 11 bits of sr4export's address into ldo */ + + store_unsigned_integer + (&dummy[SR4EXPORT_LDO_OFFSET], + INSTRUCTION_SIZE, + deposit_14 (sr4export_addr & MASK_11, + extract_unsigned_integer (&dummy[SR4EXPORT_LDO_OFFSET], + INSTRUCTION_SIZE))); + } +#endif write_register (22, pc); @@ -2411,12 +2446,14 @@ hppa_frame_find_saved_regs (frame_info, frame_saved_regs) return; } +#ifdef FRAME_FIND_SAVED_REGS_IN_SIGTRAMP /* Handle signal handler callers. */ if (frame_info->signal_handler_caller) { FRAME_FIND_SAVED_REGS_IN_SIGTRAMP (frame_info, frame_saved_regs); return; } +#endif /* Get the starting address of the function referred to by the PC saved in frame. */ -- cgit v1.1