From 672786833c63ec2f9504a7eb0a75d99f0617c7b2 Mon Sep 17 00:00:00 2001 From: Fred Fish Date: Fri, 31 Jul 1992 23:17:54 +0000 Subject: Update cygnus copies of currently undistributed i860 files maintained by Peggy Fieland at stratus.com. --- gdb/i860-break.h | 83 ++++++ gdb/i860-opcode.h | 8 +- gdb/i860-pinsn.c | 9 +- gdb/i860-tdep.c | 791 +++++++++++++++++++++++++++++++++++++++++++----------- gdb/tm-i860.h | 473 ++++++++++++++++++++++++++++++++ gdb/xm-i860.h | 21 ++ 6 files changed, 1213 insertions(+), 172 deletions(-) create mode 100644 gdb/i860-break.h create mode 100644 gdb/tm-i860.h create mode 100644 gdb/xm-i860.h (limited to 'gdb') diff --git a/gdb/i860-break.h b/gdb/i860-break.h new file mode 100644 index 0000000..36da6b0 --- /dev/null +++ b/gdb/i860-break.h @@ -0,0 +1,83 @@ +/* I860 -specific breakpoint stuff. + Copyright (C) 1986, 1987 Free Software Foundation, Inc. + +GDB is distributed in the hope that it will be useful, but WITHOUT ANY +WARRANTY. No author or distributor accepts responsibility to anyone +for the consequences of using it or for whether it serves any +particular purpose or works at all, unless he says so in writing. +Refer to the GDB General Public License for full details. + +Everyone is granted permission to copy, modify and redistribute GDB, +but only under the conditions described in the GDB General Public +License. A copy of this license is supposed to have been given to you +along with GDB so you can know your rights and responsibilities. It +should be in a file named COPYING. Among other things, the copyright +notice and this notice must be preserved on all copies. + +In other words, go ahead and share GDB, but don't try to stop +anyone else from sharing it farther. Help stamp out software hoarding! +*/ + +/* #define BREAKPOINT_DEBUG 1 */ + +#include "tm.h" + +#ifdef i860 +void i860_insert_breakpoints(); +void i860_dbrk_breakpoints(); + +#define BREAKPOINT_HERE(b,pc) ((b->act_addr[0] == pc) || (b->act_addr[1] == pc) ||(b->act_addr[2] == pc) || (b->act_addr[2] == pc)) + +/* This is the sequence of bytes we insert for a breakpoint. */ + +static char break_insn[] = BREAKPOINT; +static char float_insn[] = BREAKFLOAT; + +#endif + +#define FOPMSK 0x4C000000 +#define DOPMSK 0x4C000200 +#define FOP860 0x48000000 +#define DOP860 0x48000200 + +#define ALN32(a) ((( (int)(a) & 0x0007) == 0x04) ) +#define ALN64(a) ((( (int)(a) & 0x0007) == 0x00) ) +/* +#define ISFOP(a) ((((adj_read_memory_integer(a)) & FOPMSK)==FOP860 )) +#define ISCOR(a) ((!(((adj_read_memory_integer(a)) & FOPMSK)==FOP860 ))) +#define ISDOP(a) ((((adj_read_memory_integer(a)) & DOPMSK)==DOP860 )) +*/ + +#define ISFOP(a) ((((adj_read_memory_integer(a)) & FOPMSK)==FOP860 )) +#define ISCOR(a) ((!(((adj_read_memory_integer(a)) & FOPMSK)==FOP860 ))) +#define ISDOP(a) ((((adj_read_memory_integer(a)) & DOPMSK)==DOP860 )) + +#define ISDIM(a) (\ + ( ISDOP(a) && ALN64(a) && ISCOR(a+4)) || \ + ((ISFOP(a) && ALN64(a) && ISCOR(a+4)) && (ISDOP(a-8) || ISDOP(a-0x10))) || \ + ( ISCOR(a) && ALN32(a) && ISDOP(a-4)) || \ + ((ISCOR(a) && ALN32(a) && ISFOP(a+4)) && (ISDOP(a-4) || ISDOP(a-0x0C))) \ + ) +/* +#define ISDIM(a) (\ + ( ISDOP(a) && ALN64(a) && ISCOR(a+4)) || \ + ((ISFOP(a) && ALN64(a) && ISCOR(a+4)) && (ISDOP(a-8) || ISDOP(a-16))) || \ + ( ISCOR(a) && ALN32(a) && ISDOP(a-4)) || \ + ((ISCOR(a) && ALN32(a) && ISFOP(a+4)) && (ISDOP(a-4) || ISDOP(a-12))) \ + ) +*/ +#define FOPADR(a) ( ((int)(a) & 0xFFFFFFF8) ) +#define CORADR(a) ((((int)(a) & 0xFFFFFFFC ) | 0x04) ) + +#define DMNEXT(a) ( ISDIM(a)?(ISDIM(a+1)?(a+2):(a+1)):(a+1) ) +#define STDIM (((*(int *)&(registers[REGISTER_BYTE(PS_REGNUM)])) & 0x6000) == 0x2000 ) +#define INDIM (((*(int *)&(registers[REGISTER_BYTE(PS_REGNUM)])) & 0x6000) == 0x4000 ) +#define ENDIM (((*(int *)&(registers[REGISTER_BYTE(PS_REGNUM)])) & 0x6000) == 0x6000 ) + +#define DIM 8 +#define RIM 0x8004 +#define SIM 4 +#define ADDR_INC(a) (((int)(a) & 0x0FFF)) + +#define SINGLE_STEP_MODE 1 +#define BREAK_MODE 0 diff --git a/gdb/i860-opcode.h b/gdb/i860-opcode.h index 0ffb80c..daf7c90 100644 --- a/gdb/i860-opcode.h +++ b/gdb/i860-opcode.h @@ -1,7 +1,5 @@ -/* Intel i860 opcode structures for GDB, the GNU debugger. - Copyright status of this module is unclear!!! - Copyright (C) 1992 Free Software Foundation, Inc. - SVR4 changes Contributed by Peggy Fieland (pfieland@stratus.com) +/* Intel I860 opcde list for GDB, the GNU debugger. + Copyright (C) 1986, 1987 Free Software Foundation, Inc. GDB is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY. No author or distributor accepts responsibility to anyone @@ -134,5 +132,3 @@ typedef enum { Error, not_branch, uncond, uncond_d, cond, cond_d } branch_type; - - diff --git a/gdb/i860-pinsn.c b/gdb/i860-pinsn.c index fd03c56..c287127 100644 --- a/gdb/i860-pinsn.c +++ b/gdb/i860-pinsn.c @@ -1,7 +1,6 @@ /* Print i860 instructions for GDB, the GNU debugger. - Copyright status of this module is unclear!!! - Copyright (C) 1992 Free Software Foundation, Inc. - SVR4 changes Contributed by Peggy Fieland (pfieland@stratus.com) + Copyright (C) 1986, 1987 Free Software Foundation, Inc. + Contributed by Michael Tiemann (tiemann@mcc.com) GDB is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY. No author or distributor accepts responsibility to anyone @@ -20,6 +19,8 @@ In other words, go ahead and share GDB, but don't try to stop anyone else from sharing it farther. Help stamp out software hoarding! */ +#include + #include "defs.h" #include "tm-i860.h" #include "i860-opcode.h" @@ -655,5 +656,3 @@ ctrl_a(name, insn, memaddr, stream) print_address ((CORE_ADDR) (memaddr + 4 + offset), stream); } - - diff --git a/gdb/i860-tdep.c b/gdb/i860-tdep.c index 4d631db..3c5f940 100644 --- a/gdb/i860-tdep.c +++ b/gdb/i860-tdep.c @@ -1,7 +1,7 @@ -/* Target-dependent code for the i860 for GDB, the GNU debugger. - Copyright is unclear on this module!!! - Copyright (C) 1992 Free Software Foundation, Inc. - SVR4 and ELF/DWARF changes Contributed by Peggy Fieland (pfieland@stratus.com) +/* Machine-dependent code which would otherwise be in inflow.c and core.c, + for GDB, the GNU debugger. + Copyright (C) 1986, 1987 Free Software Foundation, Inc. + This code is for the i860 cpu. GDB is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY. No author or distributor accepts responsibility to anyone @@ -19,11 +19,12 @@ In other words, go ahead and share GDB, but don't try to stop anyone else from sharing it farther. Help stamp out software hoarding! */ -#include "defs.h" +#include #include #include +#include "defs.h" #include "tm-i860.h" #include "frame.h" #include "inferior.h" @@ -31,11 +32,12 @@ #include "symtab.h" #include "value.h" -#include "tm-i860.h" #include "i860-opcode.h" -#include "break.h" +#include "breakpoint.h" +#include "i860-break.h" #include "command.h" +#include "target.h" #ifdef notdef #include @@ -67,18 +69,22 @@ extern int read_memory_integer(); extern int print_insn(); extern void bzero(); extern void bcopy(); -extern int store_inferior_registers(int); -extern int outside_startup_file(); int btdebug = 0; /* change value to 1 to enable debugging code */ +int ansi_conformant; #define BTDEBUG if (btdebug) btdebug_message extern int errno; extern int attach_flag; +extern char registers[]; +static CORE_ADDR get_saved_basereg(); #define INSTRUCTION_LENGTH 4 #define REGISTER_LENGTH 4 +#define ALIGN_ARG(size,len) ((size + (len-1))&(-len)) +#define NUM_FLOAT_ARG_REGS 8 +#define NUM_INT_ARG_REGS 12 /* routine to print debugging messages */ void btdebug_message(char *format, ...) @@ -92,6 +98,59 @@ void btdebug_message(char *format, ...) } +/* Peggy Fieland. Routine that attempts to find the start of the entry sequence + for a routine. */ +/* maximum number of instrutions to search back */ +#define MAX_ROUTINE_SIZE 4096 +CORE_ADDR find_entry_start(pc) +CORE_ADDR pc; +{ + CORE_ADDR instr, top_pc; + int i; + + top_pc = pc; + for (i = 0; i < MAX_ROUTINE_SIZE; ++i) + + { + instr = (unsigned)( adj_read_memory_integer (top_pc)); + /* Recognize "addu|adds -X,sp,sp" insn. */ + + if ((instr & 0xEFFF0000) == 0x84420000) + { + return (top_pc); + } + top_pc -= INSTRUCTION_LENGTH; + } + return (0); +} + + + +/* Written by Peggy Fieland (Margaret_Fieland@vos.stratus.com) */ +/* get the contents of a base register. Used for dwarf OP_BASEREG */ +/* At present, only OP_BASEREG generated is for R28. NOTE that for stuff based on R28, + the value we want is the VALUE AT PROCEDURE INVOKATION, and thus is the frame we + use to get the value is the caller's frame. */ +CORE_ADDR get_saved_basereg (frame, basereg) +FRAME frame; +int basereg; +{ + CORE_ADDR addr; + if (basereg == R28) /* Unconditionally ??? */ + { + frame = get_prev_frame (frame); + get_saved_register((char *) &addr, (int *) NULL, (CORE_ADDR *) NULL, frame, + basereg, (enum lval_type *)NULL); + + } + else + get_saved_register((char *) &addr, (int *) NULL, (CORE_ADDR *) NULL, frame, + basereg, (enum lval_type *)NULL); + + return (addr); +} + + /* return nonzero if the routine containing pc has been * compiled with -g. We assume -g if the first instruction is @@ -101,12 +160,16 @@ void btdebug_message(char *format, ...) */ static int g_routine(pc) + CORE_ADDR pc; { CORE_ADDR instr; CORE_ADDR top_pc; top_pc = get_pc_function_start(pc); + if (top_pc == NULL) + top_pc = find_entry_start (pc); + if (top_pc != NULL) { instr = (unsigned)( adj_read_memory_integer (top_pc)); @@ -146,25 +209,38 @@ CORE_ADDR pc; return(0); } + /* return the stack offset where r1 (return linkage ) register is stored */ -static int find_r1_offset(pc) -CORE_ADDR pc; +static CORE_ADDR find_r1(pc,sp,fp) +CORE_ADDR pc,sp, fp; { int r1_off,i; - CORE_ADDR instr; + CORE_ADDR instr, ret_pc; /* look for the instruction and examine the offset */ - for (i=INSTRUCTION_LENGTH*1; i< INSTRUCTION_LENGTH*4; i+=INSTRUCTION_LENGTH){ - instr = (unsigned)( adj_read_memory_integer(pc+i)); - if ((instr & 0xFFE0F801) == 0x1C400801) { /* st.l r1,X(sp) */ + for (i=INSTRUCTION_LENGTH*1; i< INSTRUCTION_LENGTH*4; i+=INSTRUCTION_LENGTH) + { + instr = (unsigned)( adj_read_memory_integer(pc+i)); + if ((instr & 0xFFE0F801) == 0x1C400801) + { + /* st.l r1,X(sp) */ - r1_off = SIGN_EXT16(((instr&0x001F0000) >> 5) | - (instr&0x000007FE)); - return(r1_off); + r1_off = SIGN_EXT16(((instr&0x001F0000) >> 5) | + (instr&0x000007FE)); + ret_pc = read_memory_integer(sp+r1_off,sizeof(long)); + return(ret_pc); + } + else if ((instr & 0xFFE0F801) == 0x1C600801) + { + /* st.l r1,X(fp) */ + r1_off = SIGN_EXT16(((instr&0x001F0000) >> 5) | + (instr&0x000007FE)); + ret_pc = read_memory_integer(fp+r1_off,sizeof(long)); + return(ret_pc); + } } - } - return(-1); + return(0); } CORE_ADDR skip_prologue(CORE_ADDR); @@ -193,9 +269,6 @@ CORE_ADDR rp, fp; else return (1); } - - - /* get the pc and frame pointer (or sp ) * for the routine that called us * when we (this_pc) is not within a -g routine @@ -204,9 +277,10 @@ CORE_ADDR rp, fp; /* note this is written for Metaware version R2.1d compiler */ /* Modified by Peggy Fieland Margaret_Fieland@vos.stratus.com */ -static int caller_pc(this_pc,this_sp,to_pc,to_fp) - CORE_ADDR this_pc,this_sp; +static int caller_pc(this_pc,this_sp,this_fp,to_pc,to_fp, called_from_frame_chain) + CORE_ADDR this_pc,this_sp, this_fp; CORE_ADDR *to_pc, *to_fp; + int called_from_frame_chain; { CORE_ADDR func_start; int sp_offset,offset; @@ -216,8 +290,19 @@ static int caller_pc(this_pc,this_sp,to_pc,to_fp) func_start = get_pc_function_start(this_pc); + if (func_start == NULL) + func_start = find_entry_start (this_pc); + BTDEBUG("caller_pc func_start %x\n", func_start); + if ((func_start == NULL)) + { + /* error in traceback */ + fprintf(stderr, "error, unable to find start of function\n"); + return(0); + + } + if (func_start!= NULL) { if( has_a_frame(func_start) ){ @@ -236,18 +321,22 @@ static int caller_pc(this_pc,this_sp,to_pc,to_fp) } else { - /* if we get here, procedure doesn't have a frame. If we didn't + /* if we get here, procedure doesn't have a frame. If we do anything weird, the frame pointer and return register have the values we want. Check them to see if they are valid. */ CORE_ADDR temp_rp, temp_fp; + /* temporary warning, since at the moment we don't have support for + the shared library */ + temp_rp = read_register(RP_REGNUM); temp_fp = read_register(FP_REGNUM); if (!valid_regs(temp_rp, temp_fp)) { - printf("error frame_chain\n"); + fprintf(stderr, + "error - unable to find return address, traceback terminating\n"); return(0); } BTDEBUG("caller_pc no frame, using r1 %x and fp %x\n", @@ -259,14 +348,15 @@ static int caller_pc(this_pc,this_sp,to_pc,to_fp) BTDEBUG("sp_offset = %d %x\n",sp_offset,sp_offset); - offset = find_r1_offset(func_start); + pc = find_r1(func_start, this_sp, this_fp); - if( offset < 0 ){ - printf("cant find return address for routine at %x\n", - func_start); - return(0); - } - pc = read_memory_integer(this_sp+offset,sizeof(long)); + if(pc == NULL) + { + + /* r1 wasn't stored between pc and function start */ + pc = read_register (RP_REGNUM); + } + sp= this_sp - sp_offset; BTDEBUG("callers pc = %x sp = %x\n",pc,sp); @@ -281,7 +371,8 @@ static int caller_pc(this_pc,this_sp,to_pc,to_fp) BTDEBUG("caller_a_g\n"); if( ! (offset = find_fp_offset(func_start)) ) { - printf("error fp_offset\n"); + fprintf(stderr, "error - unable to find caller frame for routine at 0x%x, " + "traceback terminating\n", func_start); return(0); } BTDEBUG("offset = %x %d\n",offset,offset); @@ -308,7 +399,9 @@ static int caller_pc(this_pc,this_sp,to_pc,to_fp) if (!valid_regs(temp_rp, temp_fp)) { - printf("error frame_chain\n"); + fprintf(stderr, + "error - unable to find return address, traceback terminating\n"); + return(0); } BTDEBUG("caller_pc no frame, using r1 %x and fp %x\n", @@ -338,7 +431,6 @@ struct breakpoint *brk; CORE_ADDR nextadr, prevadr; int val = not_branch; long offset; /* Must be signed for sign-extend */ - extern char registers[]; prevadr = nextadr = 0; brk->address1 = 0; @@ -488,21 +580,23 @@ struct breakpoint *brk; /* bc /bnc */ /* bc.t /bnc.t*/ if ((instr & 0xF8000000) == 0x68000000) /* br or call */ - printf(" Breakpoint adjusted to avoid br/call delay slot and multiple breakpoints\n"); + BTDEBUG(" Breakpoint adjusted to avoid br/call delay slot and multiple breakpoints\n"); if ((instr & 0xF4000000) == 0x74000000) /* bc.t or bnc.t */ - printf(" Breakpoint adjusted to avoid bc.t/bnc.t delay slot and multiple breakpoints\n"); + BTDEBUG(" Breakpoint adjusted to avoid bc.t/bnc.t delay slot and" + "multiple breakpoints\n"); + /* it IS really OK to set a break on the instruction AFTER the conditional branch -- it DOESN't have a delay slot */ if ((instr & 0xF4000000) == 0x70000000) /* bc / bnc */ - /* printf(" Breakpoint adjusted to avoid bc/bnc delay slot and multiple breakpoints\n"); */ adjust = 0; } else if ((instr & 0xFC00003F) == 0x4C000002 || /* bri/ calli */ (instr & 0xFC000000) == 0x40000000) { adjust++; - printf(" Breakpoint adjusted to avoid calli/bri delay slot and multiple breakpoints\n"); + BTDEBUG(" Breakpoint adjusted to avoid calli/bri delay slot and" + " multiple breakpoints\n"); } else if ((instr & 0xF0000000) == 0x50000000) /* bte - btne */ { @@ -516,7 +610,8 @@ struct breakpoint *brk; ((instr & 0xFC000000) == 0xB4000000) { adjust++; - printf(" Breakpoint adjusted to avoid bla delay slot and multiple breakpoints\n"); + BTDEBUG(" Breakpoint adjusted to avoid bla delay slot and" + " multiple breakpoints\n"); } if (adjust != 0) { @@ -618,15 +713,19 @@ int signal; { CORE_ADDR pc; branch_type place_brk(); - + int *shadow0, *shadow1, *shadow2, *shadow3; + + shadow0 = (int *) &brk.shadow_contents[0]; + shadow1 = (int *) &brk.shadow_contents[4]; + shadow2 = (int *) &brk.shadow_contents[8]; + shadow3 = (int *) &brk.shadow_contents[12]; pc = read_register (PC_REGNUM); if (!one_stepped) { brk.address = pc; place_brk (pc, SINGLE_STEP_MODE, &brk); - brk.shadow_contents[0] = brk.shadow_contents[1] = 0; - brk.shadow_contents[2] = brk.shadow_contents[3] = 0; + *shadow0 = *shadow1 = *shadow2 = *shadow3 = 0; if (brk.mode == DIM) { @@ -640,10 +739,10 @@ int signal; } if (( brk.address1 != NULL)) { - adj_read_memory (brk.act_addr[2], &brk.shadow_contents[2], + adj_read_memory (brk.act_addr[2], shadow2, INSTRUCTION_LENGTH); adj_write_memory (brk.act_addr[2], break_insn, INSTRUCTION_LENGTH); - adj_read_memory (brk.act_addr[3], &brk.shadow_contents[3], + adj_read_memory (brk.act_addr[3], shadow3, INSTRUCTION_LENGTH); /* adj_write_memory (brk.act_addr[3], float_insn, INSTRUCTION_LENGTH); */ @@ -663,11 +762,11 @@ int signal; btdebug_message("\n"); } - adj_read_memory (brk.act_addr[0], &brk.shadow_contents[0], + adj_read_memory (brk.act_addr[0], shadow0, INSTRUCTION_LENGTH); adj_write_memory (brk.act_addr[0], break_insn, INSTRUCTION_LENGTH); - adj_read_memory (brk.act_addr[1], &brk.shadow_contents[1], + adj_read_memory (brk.act_addr[1], shadow1, INSTRUCTION_LENGTH); /* adj_write_memory (brk.act_addr[1], float_insn, INSTRUCTION_LENGTH); */ @@ -683,7 +782,7 @@ int signal; print_insn( brk.act_addr[2], stderr); btdebug_message("\n"); } - adj_read_memory (brk.act_addr[2], &brk.shadow_contents[2], + adj_read_memory (brk.act_addr[2], shadow2, INSTRUCTION_LENGTH); adj_write_memory (brk.act_addr[2], break_insn, INSTRUCTION_LENGTH); } @@ -698,7 +797,7 @@ int signal; print_insn( brk.act_addr[0], stderr); btdebug_message("\n"); } - adj_read_memory (brk.act_addr[0], &brk.shadow_contents[0], + adj_read_memory (brk.act_addr[0], shadow0, INSTRUCTION_LENGTH); adj_write_memory (brk.act_addr[0], break_insn,INSTRUCTION_LENGTH); } @@ -712,12 +811,12 @@ int signal; /* Remove breakpoints */ if (brk.mode == DIM) { - adj_write_memory (brk.act_addr[0], &brk.shadow_contents[0], + adj_write_memory (brk.act_addr[0], shadow0, INSTRUCTION_LENGTH); - adj_write_memory (brk.act_addr[1], &brk.shadow_contents[1], + adj_write_memory (brk.act_addr[1], shadow1, INSTRUCTION_LENGTH); } else { - adj_write_memory (brk.act_addr[0], &brk.shadow_contents[0], + adj_write_memory (brk.act_addr[0], shadow0, INSTRUCTION_LENGTH); } @@ -725,12 +824,12 @@ int signal; { if (brk.mode == DIM) { - adj_write_memory (brk.act_addr[2], &brk.shadow_contents[2], + adj_write_memory (brk.act_addr[2], shadow2, INSTRUCTION_LENGTH); - adj_write_memory (brk.act_addr[3], &brk.shadow_contents[3], + adj_write_memory (brk.act_addr[3], shadow3, INSTRUCTION_LENGTH); } else { - adj_write_memory (brk.act_addr[2], &brk.shadow_contents[2], + adj_write_memory (brk.act_addr[2], shadow2, INSTRUCTION_LENGTH); } } @@ -898,18 +997,18 @@ frame_find_saved_regs(frame_info, frame_saved_regs) at fp + NUM_REGS*4 */ for (i = 1; i < NUM_REGS; i++) /* skip reg 0 */ - if (i != SP_REGNUM && i != FP0_REGNUM && i != FP0_REGNUM + 1) - /* the register numbers used in the instruction and the ones used to index - the regs array are not the same -- compensate */ - frame_saved_regs->regs[i+R0] = frame_info->frame + i*REGISTER_LENGTH; - - frame_saved_regs->regs[SP_REGNUM] = frame_info->frame + NUM_REGS*REGISTER_LENGTH; + /* the register numbers used in the instruction and the ones used to index + the regs array are not the same -- compensate */ + frame_saved_regs->regs[i+R0] = frame_info->frame + i*REGISTER_LENGTH; call_dummy_set = 0; return; } pc = get_pc_function_start (frame_info->pc); + if (pc == NULL) + pc = find_entry_start (frame_info->pc); + if (pc != NULL) { instr = (unsigned)(adj_read_memory_integer (pc)); @@ -1051,8 +1150,10 @@ frame_chain(thisframe) CORE_ADDR instr; int offset; CORE_ADDR thisfp = thisframe->frame; - - /* get the frame pointer actually sp for a non -g + struct frame_saved_regs fsr; + CORE_ADDR thissp; + + /* get the frame pointer actually sp for a non -g * for the routine that called us routine */ @@ -1064,8 +1165,10 @@ frame_chain(thisframe) } if( ! g_routine(thisframe->pc) ){ + thissp = get_saved_basereg (thisframe, SP_REGNUM); + BTDEBUG( "non g at %x\n",thisframe->pc); - caller_pc(thisframe->pc,thisframe->sp,&pc,&fp); + caller_pc(thisframe->pc, thissp, thisfp,&pc,&fp, 1); BTDEBUG("caller_pc returned %x %x \n",pc,fp); return(fp); @@ -1079,7 +1182,9 @@ frame_chain(thisframe) /* handle the Metaware-type pseudo-frame */ func_start = get_pc_function_start(thisframe->pc); - + if (func_start == NULL) + func_start = find_entry_start (thisframe->pc); + if (func_start != NULL) { @@ -1108,6 +1213,9 @@ int no_stored_rp(CORE_ADDR pc) CORE_ADDR func_start, prologue_end; func_start = get_pc_function_start(pc); + if (func_start == NULL) + func_start = find_entry_start (pc); + if (func_start != NULL) { prologue_end = func_start; @@ -1142,11 +1250,12 @@ FRAME frame_struct; CORE_ADDR pc1; CORE_ADDR sp ; CORE_ADDR fp; + struct frame_saved_regs fsr; frame = frame_struct->frame; pc = frame_struct->pc; - sp = frame_struct->sp; - + + BTDEBUG("frame_saved_pc input: frame %x, pc %x", frame, pc); @@ -1163,21 +1272,23 @@ FRAME frame_struct; } else if( ! g_routine(pc) ) { - caller_pc(pc,sp,&pc,&frame); + sp = get_saved_basereg (frame_struct, SP_REGNUM); + + caller_pc(pc,sp,frame_struct->frame, &pc,&frame, 0); } else { pc = read_memory_integer (frame + 4, sizeof(long)); - if (!outside_startup_file(pc)) + if (inside_entry_file(pc)) { - BTDEBUG("pc %x outside startup file \n",pc); + BTDEBUG("pc %x outside entry file \n",pc); pc1 = read_memory_integer (frame, sizeof(long)); - if (outside_startup_file(pc1)) + if (!inside_entry_file(pc1)) pc = pc1; else pc = 0; @@ -1189,42 +1300,141 @@ FRAME frame_struct; } /* Pass arguments to a function in the inferior process - ABI compliant - Note that this routine DOES NOT HANDLE memory argument lists, ie - it gives up if there are too many arguments to pass in registers.*/ + Modified by Peggy Fieland (Margaret_Fieland@vos.stratus.com) to account + for newer ABI conventions. Note that now, unfortunately, we MUST KNOW + if we expect a float or a double. For now, we will assume that the + caller of this routine has the types of these arguments correct.... + NOTE THAT THIS ROUTINE DOES NO ARGUMENT COERCION -- it's all in the + caller. + Modified by Peggy Fieland to handle memory argument lists. + */ -void -pass_function_arguments(args, nargs, struct_return) +#define IS_EVEN_REG(fl) (((fl - FP0_REGNUM)%2) == 0) +CORE_ADDR +pass_function_arguments(args, nargs, struct_return, struct_addr, sp) value *args; int nargs; int struct_return; + CORE_ADDR struct_addr; + CORE_ADDR sp; { - int ireg = (struct_return) ? 17 : 16; - int freg = FP0_REGNUM + 8; + int ireg = (struct_return) ? R17 : R16; + int freg = F8; int i; struct type *type; value arg; - long tmp; - value value_arg_coerce(); - + signed long tmp; + unsigned long ul_tmp; + signed short s_tmp; + unsigned short us_tmp; + signed char c_tmp; + unsigned char uc_tmp; + CORE_ADDR arg_ptr; + int len; + + if (struct_return) + { + write_register(R16, struct_addr); + } + + arg_ptr = sp; /* Space was allocated for memory argument list in i860_arg_coerce */ + + /* Loop through the arguments, putting the values in a register or memory as appropriate. */ for (i = 0; i < nargs; i++) { - arg = value_arg_coerce(args[i]); + arg = args[i]; type = VALUE_TYPE(arg); + len = TYPE_LENGTH(type); if (type == builtin_type_double) { - write_register_bytes(REGISTER_BYTE(freg), VALUE_CONTENTS(arg), sizeof(double)); - freg += 2; + /* see ABI . Note freg MUST BE INCREMENTED even if arg goes into the + memory argument list for this code to work correctly for subsequent + arguments. */ + if (!IS_EVEN_REG(freg)) + freg += 1; + /* see if argument can be put in a register, or whether it must go + into the memory argument list */ + if (freg < F8 + NUM_FLOAT_ARG_REGS) + { + /* It can go in a register */ + bcopy(VALUE_CONTENTS(arg), &tmp, sizeof(double)); + write_register_bytes(REGISTER_BYTE(freg), (char *) &tmp, TYPE_LENGTH(type)); + freg += 2; + } + else + { + /* It goes into memory argument list */ + arg_ptr = ALIGN_ARG( arg_ptr, sizeof(double)); + write_memory (arg_ptr, VALUE_CONTENTS (arg), len); + arg_ptr += len; + } + + } + else if (type == builtin_type_float) + { + if (freg < F8 + NUM_FLOAT_ARG_REGS) + { + /* It can go in a register */ + bcopy(VALUE_CONTENTS(arg), &tmp, sizeof(long)); + write_register_bytes (REGISTER_BYTE(freg), (char *) &tmp, TYPE_LENGTH(type)); + freg++; + } + else + { + /* It goes into the memory argument list */ + arg_ptr = ALIGN_ARG(arg_ptr, sizeof(float)); + write_memory (arg_ptr, VALUE_CONTENTS (arg), len); + arg_ptr += len; + } } else { - bcopy(VALUE_CONTENTS(arg), &tmp, sizeof(long)); - write_register(ireg, tmp); - ireg++; + /* All structs are passed by value, and hence they all go into the memory + argument list (see ABI); otherwise, as above, see if we have run + out of registers */ + + /* Cast value correctly so we can load it into a register or into the + memory argument list -- see ABI */ + if (TYPE_LENGTH(type) < sizeof(long)) + { + if (TYPE_FLAGS(type) & TYPE_FLAG_UNSIGNED) + arg = value_cast(builtin_type_unsigned_int, arg); + else + arg = value_cast (builtin_type_int, arg); + type = VALUE_TYPE(arg); + len = TYPE_LENGTH(type); + } + + if ((TYPE_CODE(type) == TYPE_CODE_STRUCT) || (ireg >= R16 + NUM_INT_ARG_REGS)) + { + /* It goes into the memory argument list. Minimum alignment requirements + are on a 4-byte boundary */ + + if ((TYPE_CODE(type) == TYPE_CODE_INT) || + (TYPE_CODE(type) == TYPE_CODE_ENUM) || + (TYPE_CODE(type) == TYPE_CODE_CHAR) || + (TYPE_CODE(type) == TYPE_CODE_BOOL)) + arg_ptr = ALIGN_ARG(arg_ptr, len); + else + arg_ptr = ALIGN_ARG (arg_ptr, sizeof(long)); /* align on 4-byte boundary */ + write_memory (arg_ptr, VALUE_CONTENTS (arg), len); + arg_ptr += len; + } + else + { + + bcopy(VALUE_CONTENTS(arg), &tmp, sizeof(long)); + write_register(ireg, tmp); + ireg++; + } + } } - if (ireg >= 28 || freg >= FP0_REGNUM + 16) - error("Too many arguments to function"); + + + return (sp); + } @@ -1243,19 +1453,23 @@ char *doro_reg[] = { }; #define NREGS 32 -#if 0 -/* This routine is uncalled -- remove this routine sometime */ + get_reg(regno) { char raw_buffer[32]; int addr; int virtual_buffer; - - read_relative_register_raw_bytes (regno, raw_buffer); + + /* NOTE that only integer and floating point registers can be relative to a frame */ + + if ((regno >= R0) && (regno <= F31)) /* user register */ + read_relative_register_raw_bytes (regno, raw_buffer); + else + bcopy (®isters[regno << 2], raw_buffer, sizeof (long)); + REGISTER_CONVERT_TO_VIRTUAL (addr, raw_buffer, &virtual_buffer); return(virtual_buffer); } -#endif #if 0 @@ -1347,10 +1561,12 @@ int ss; } #endif -extern char registers[]; /* i860-specific routine to print the register set. Note that we ALWAYS print information - on the floating point registers, so we ignore the parameter fpregs */ + on the floating point registers, so we ignore the parameter fpregs. + NOTE also that only integer and floating point registers can be relative to a frame -- + see subroutine get_reg (above ) */ + void i860_do_registers_info(regnum,fpregs) int regnum; int fpregs; @@ -1366,10 +1582,7 @@ void i860_do_registers_info(regnum,fpregs) if (regnum != -1) /* print one register */ { - if ((regnum >=F0 ) && (regnum <= F31)) - bcopy (®isters[ADJ_FREG(regnum)<<2], &val, sizeof (long)); - else - bcopy (®isters[regnum<<2], &val, sizeof (long)); + val = get_reg(regnum); printf("%-4s 0x%08x\t", reg_names[regnum], val); printf("\n\t"); fflush(stdout); } @@ -1379,31 +1592,31 @@ void i860_do_registers_info(regnum,fpregs) printf("\n Control/Status Registers :- \n\t"); for (j=0; j<=DB; j++) { - bcopy (®isters[j<<2], &val, sizeof (long)); + val = get_reg(j); printf("%-4s 0x%08x\t", reg_names[j], val); } printf("\n\t"); fflush(stdout); /* EPSR */ - bcopy (®isters[EPSR<<2], &val, sizeof (long)); + val = get_reg(EPSR); printf("%-4s 0x%08x\t", reg_names[EPSR], val); /* FSR */ - bcopy (®isters[FSR<<2], &val, sizeof (long)); + val = get_reg(FSR); printf("%-4s 0x%08x\t", reg_names[FSR], val); /* CCR */ - bcopy (®isters[CCR<<2], &val, sizeof (long)); + val = get_reg(CCR); printf("%-4s 0x%08x\t", reg_names[CCR], val); /* BEAR*/ - bcopy (®isters[BEAR<<2], &val, sizeof (long)); + val = get_reg(BEAR); printf("%-4s 0x%08x\t", reg_names[BEAR], val); #ifdef JIM_ADD_PRIV for (j=P0; j<=P3; j++) { - bcopy (®isters[j<<2], &val, sizeof (long)); + val = get_reg(j); printf("%-4s 0x%08x\t", reg_names[j], val); } #endif @@ -1415,7 +1628,7 @@ void i860_do_registers_info(regnum,fpregs) { printf("\n\t"); fflush(stdout); } - bcopy (®isters[j<<2], &val, sizeof (long)); + val = get_reg(j); printf("%-4s 0x%08x\t", reg_names[j], val); } @@ -1426,7 +1639,7 @@ void i860_do_registers_info(regnum,fpregs) { printf("\n\t"); fflush(stdout); } - bcopy (®isters[ADJ_FREG(j)<<2], &val, sizeof (long)); + val = get_reg(j); printf("%-4s 0x%08x\t", reg_names[j], val); } @@ -1438,8 +1651,8 @@ void i860_do_registers_info(regnum,fpregs) { printf("\n\t"); fflush(stdout); } - bcopy (®isters[j<<2], &val, sizeof (long)); - bcopy (®isters[(j+1)<<2], &valh, sizeof (long)); + val = get_reg(j); + valh = get_reg(j+1); printf("%-6s 0x%08x %08x\t", reg_names[j], val,valh); } @@ -1447,8 +1660,8 @@ void i860_do_registers_info(regnum,fpregs) { unsigned int valh; j = PSV_I1; - bcopy (®isters[j<<2], &val, sizeof (long)); - bcopy (®isters[(j+1)<<2], &valh, sizeof (long)); + val = get_reg(j); + valh = get_reg(j+1); printf("\t\t\t%-8s 0x%08x %08x \n", reg_names[j], val,valh); } @@ -1456,10 +1669,12 @@ void i860_do_registers_info(regnum,fpregs) for (j=PSV_L1; j<=PSV_L3; j+=REGISTER_LENGTH) { unsigned int valh, val2,val3; - bcopy (®isters[j<<2], &val, sizeof (long)); - bcopy (®isters[(j+1)<<2], &valh, sizeof (long)); - bcopy (®isters[(j+2)<<2], &val2, sizeof (long)); - bcopy (®isters[(j+3)<<2], &val3, sizeof (long)); + + val = get_reg(j); + valh = get_reg(j+1); + val2 = get_reg(j+2); + val3 = get_reg(j+3); + printf("\t\t%-8s 0x%08x %08x %08x %08x\n", reg_names[j], val,valh,val2,val3); } @@ -1468,11 +1683,13 @@ void i860_do_registers_info(regnum,fpregs) for (i=PSV_FSR1,j=PSV_A1,k=PSV_M1; j<=PSV_A3; i++,j+=2,k+=2) { unsigned int valh,val2,val3,val4; - bcopy (®isters[i<<2], &val4, sizeof (long)); - bcopy (®isters[j<<2], &val, sizeof (long)); - bcopy (®isters[(j+1)<<2], &valh, sizeof (long)); - bcopy (®isters[k<<2], &val2, sizeof (long)); - bcopy (®isters[(k+1)<<2], &val3, sizeof (long)); + + val4 = get_reg(i); + val = get_reg(j); + valh = get_reg(j+1); + val2 = get_reg(k); + val3 = get_reg(k+1); + printf(" %-4s 0x%08x %08x\t", reg_names[j], val,valh); printf("%-4s 0x%08x %08x\t", reg_names[k], val2,val3); printf("%-4s 0x%08x\n", reg_names[i], val4); @@ -1515,8 +1732,7 @@ void i860_dbrk_breakpoint() /* set a "read" data breakpoint. */ void -d_ro_break_command(arg) -char *arg; +d_ro_break_command(char *arg, int num) { dbrkval = strtoul(arg, NULL, 0); dbrkmod = 0x01; @@ -1525,8 +1741,7 @@ char *arg; /* set a "write" data breakpoint. */ void -d_wo_break_command(arg) -char *arg; +d_wo_break_command(char *arg, int num) { dbrkval = strtoul(arg, NULL, 0); dbrkmod = 0x02; @@ -1535,27 +1750,24 @@ char *arg; /* set a "read/write" data breakpoint. */ void -d_rw_break_command(arg) -char *arg; -{ - dbrkval = strtoul(arg, NULL, 0); - dbrkmod = 0x03; - BTDEBUG(" rw_dbreak - %x %x\n", dbrkval, dbrkmod); -} +d_rw_break_command(char *arg, int num) +{ + dbrkval = strtoul(arg, NULL, 0); + dbrkmod = 0x03; + BTDEBUG(" rw_dbreak - %x %x\n", dbrkval, dbrkmod); + } /* clear data breakpoint. */ -void -clear_dbreak() -{ - dbrkval = 0; - dbrkmod = 0; -} - -/* i860-specific breakpoint initialization. Includes adding the i860-specific - data breakpoint commands. */ -void -i860_init_breakpoints() -{ + void clear_dbreak(char *arg, int num) + { + dbrkval = 0; + dbrkmod = 0; + } + +/* i860-specific breakpoint initialization. Includes adding the +i860-specific data breakpoint commands. */ +void i860_init_breakpoints() +{ dbrkval = dbrkmod = 0; add_com ("dbro", class_breakpoint, d_ro_break_command, "Set a data breakpoint READ ONLY, 32-bit data element."); @@ -1574,21 +1786,28 @@ int i860_insert_breakpoint(b) struct breakpoint *b; { int val; + int *shadow0, *shadow1, *shadow2, *shadow3; + + shadow0 = (int *)&b->shadow_contents[0]; + shadow1 = (int *)&b->shadow_contents[4]; + shadow2 = (int *)&b->shadow_contents[8]; + shadow3 = (int *)&b->shadow_contents[12]; place_brk( b->address, BREAK_MODE, b ); + if (b->mode == DIM) { - adj_read_memory (b->act_addr[0], &b->shadow_contents[0], INSTRUCTION_LENGTH); + adj_read_memory (b->act_addr[0], shadow0, INSTRUCTION_LENGTH); val = adj_write_memory (b->act_addr[0], break_insn, INSTRUCTION_LENGTH); if (val != 0 ) return val; - adj_read_memory (b->act_addr[1], &b->shadow_contents[1], INSTRUCTION_LENGTH); + adj_read_memory (b->act_addr[1], shadow1, INSTRUCTION_LENGTH); /* val = adj_write_memory (b->act_addr[1], float_insn, INSTRUCTION_LENGTH); */ if (val != 0) return val; } else { - adj_read_memory (b->act_addr[0], &b->shadow_contents[0], INSTRUCTION_LENGTH); + adj_read_memory (b->act_addr[0], shadow0, INSTRUCTION_LENGTH); val = adj_write_memory (b->act_addr[0], break_insn, INSTRUCTION_LENGTH); } if (b->address1 != 0) @@ -1596,23 +1815,22 @@ struct breakpoint *b; if (b->mode == DIM) { - adj_read_memory (b->act_addr[2], &b->shadow_contents[2], INSTRUCTION_LENGTH); + adj_read_memory (b->act_addr[2], shadow2, INSTRUCTION_LENGTH); val = adj_write_memory (b->act_addr[2], break_insn, INSTRUCTION_LENGTH); if (val) return val; - adj_read_memory (b->act_addr[3], &b->shadow_contents[3], INSTRUCTION_LENGTH); + adj_read_memory (b->act_addr[3], shadow3, INSTRUCTION_LENGTH); /* val = adj_write_memory (b->act_addr[3], float_insn, INSTRUCTION_LENGTH); */ if (val != 0) return val; } else { - adj_read_memory (b->act_addr[2], &b->shadow_contents[0], INSTRUCTION_LENGTH); + adj_read_memory (b->act_addr[2], shadow0, INSTRUCTION_LENGTH); val = adj_write_memory (b->act_addr[2], break_insn, INSTRUCTION_LENGTH); } } if (val != 0) return val; - BTDEBUG("Inserted breakpoint at 0x%x, shadow 0x%x, 0x%x.\n", - b->address, b->shadow_contents[0], b->shadow_contents[1]); + b->inserted = 1; return 0; } @@ -1621,38 +1839,43 @@ int i860_remove_breakpoint(b) struct breakpoint *b; { int val; + int *shadow0, *shadow1, *shadow2, *shadow3; + + shadow0 = (int *)&b->shadow_contents[0]; + shadow1 = (int *)&b->shadow_contents[4]; + shadow2 = (int *)&b->shadow_contents[8]; + shadow3 = (int *)&b->shadow_contents[12]; + if (b->inserted) { if (b->mode == DIM) { - val =adj_write_memory (b->act_addr[0], &(b->shadow_contents[0]), + val =adj_write_memory (b->act_addr[0], shadow0, INSTRUCTION_LENGTH); - val =adj_write_memory (b->act_addr[1], &(b->shadow_contents[1]), + val =adj_write_memory (b->act_addr[1],shadow1, INSTRUCTION_LENGTH); if (b->address1 != NULL) { - val =adj_write_memory (b->act_addr[2], &(b->shadow_contents[2]), + val =adj_write_memory (b->act_addr[2],shadow2, INSTRUCTION_LENGTH); - val =adj_write_memory (b->act_addr[3], &(b->shadow_contents[3]), + val =adj_write_memory (b->act_addr[3], shadow3, INSTRUCTION_LENGTH); } } else { - val =adj_write_memory (b->act_addr[0], b->shadow_contents, + val =adj_write_memory (b->act_addr[0], shadow0, INSTRUCTION_LENGTH); if (b->address1 != NULL) { - val =adj_write_memory (b->act_addr[2], b->shadow_contents, + val =adj_write_memory (b->act_addr[2],shadow0, INSTRUCTION_LENGTH); } } if (val != 0) return val; b->inserted = 0; - BTDEBUG( "Removed breakpoint at 0x%x, shadow 0x%x, 0x%x.\n", - b->address, b->shadow_contents[0], b->shadow_contents[1]); } return 0; @@ -1758,3 +1981,249 @@ int regno; } } #endif + + +/* Push an empty stack frame, to record the current PC, etc. */ +/* We have this frame with fp pointing to a block where all GDB-visible + registers are stored in the order GDB knows them, and sp at the next + alignment point below fp. Note: fp + NUM_REGS*4 was the old sp + */ +extern CORE_ADDR text_end; +CORE_ADDR dummy_start_addr; +void i860_push_frame() +{ + register CORE_ADDR old_fp = read_register(FP_REGNUM); + register CORE_ADDR old_sp = read_register(SP_REGNUM); + register CORE_ADDR fp ; + extern char registers[]; + + fp = old_sp - REGISTER_BYTES; + write_memory(fp, registers, REGISTER_BYTES); /* write out old register values */ + /* reset FP and SP */ + write_register(FP_REGNUM, fp); + write_register(SP_REGNUM, (fp &~ 15)); /* re-align */ + call_dummy_set = 1; +} +/* Discard from the stack the innermost frame, + restoring all saved registers. */ + +void i860_pop_frame() +{ register FRAME frame = get_current_frame (); + register CORE_ADDR fp; + struct frame_info *fi; + int i; + + fi = get_frame_info (frame); + fp = fi->frame; + + if (call_dummy_set && fi -> pc >= call_dummy_start && + fi -> pc <= call_dummy_start + CALL_DUMMY_LENGTH) + { + + read_memory(fp, registers, REGISTER_BYTES); + + target_store_registers(-1); + + { + /* since we stomped on code that will be executed when we exit the program, + restore it. */ + extern REGISTER_TYPE call_save_code[4]; + + write_memory (call_dummy_start, (char *) call_save_code, 16); + + } + call_dummy_set = 0; + } + else + { + register int regnum; + struct frame_saved_regs fsr; + char raw_buffer[12]; + + get_frame_saved_regs (fi, &fsr); + for (regnum = FP0_REGNUM + 31; regnum >= FP0_REGNUM; regnum--) + if (fsr.regs[regnum]) + write_register (regnum, read_memory_integer (fsr.regs[regnum], 4)); + for (regnum = R31; regnum >= 1; regnum--) + if (fsr.regs[regnum]) + if (regnum != SP_REGNUM) + write_register (regnum, read_memory_integer (fsr.regs[regnum], 4)); + else + write_register (SP_REGNUM, fsr.regs[SP_REGNUM]); + if (fsr.regs[PS_REGNUM]) + write_register (PS_REGNUM, read_memory_integer (fsr.regs[PS_REGNUM], 4)); + if (fsr.regs[FPS_REGNUM]) + write_register (FPS_REGNUM, read_memory_integer (fsr.regs[FPS_REGNUM],4)); + if (fsr.regs[PC_REGNUM]) + write_register (PC_REGNUM,CLEAN_PC( read_memory_integer (fsr.regs[PC_REGNUM], 4))); + } + + flush_cached_frames (); + + set_current_frame (create_new_frame (read_register (FP_REGNUM), + read_pc ())); + +} + +CORE_ADDR i860_arg_coerce(nargs, args, struct_return, sp) + int nargs; + value *args; + int struct_return; + CORE_ADDR sp; +{ + + register int scalar; + register enum type_code code2; + register struct type *type; + int i; + value arg; + int num_int_args = 0; + int num_float_args = 0; + int size = 0; + CORE_ADDR arg_ptr; + + /* if we return a structure, it's address is in R16, and thus it uses up one of the integer + argument registers. See the ABI. */ + if (struct_return) + num_int_args += 1; + + /* loop to do the right thing with all the arguments and calculate the size of the memory + argument list. We keep count of the number of integer and the number of float parameters, + as well as the size of the memory argument list. */ + + for (i = 0; i < nargs; i++) + { + + /* NOTE that this is all hunky dory in spite of the fact that we don't actually + have the signature of the called procedure EXCEPT if we are passing in floats! + This is true, since registers are 4 bytes, and the minimum alignment in the + memory argument list is 4 bytes. See the ABI for more gory details. The switch + "ansi-conformant" is an attempt to get around this problem. */ + + code2 = TYPE_CODE (VALUE_TYPE(args[i])); + + /* Only coerce if we've got switch "ansi-conformant" off. + Actually, it's OK ( and probably helpful) to coerce ALL integer arguments + (see comment above), but never mind, we make them the right size in + pass_function_arguments. */ + + if ((!ansi_conformant) && (code2 != TYPE_CODE_STRUCT)) + value_arg_coerce(args[i]); + + arg = args[i]; + type = VALUE_TYPE(args[i]); + + /* All structures are passed by value in the memory argument list. */ + if (code2 == TYPE_CODE_STRUCT) + { + size = ALIGN_ARG(size, sizeof(long)); + size += TYPE_LENGTH(type); + } + else if (type == builtin_type_float) + { + num_float_args += 1; + if (num_float_args > NUM_FLOAT_ARG_REGS) + { + size = ALIGN_ARG(size, TYPE_LENGTH(type)) ; + size += TYPE_LENGTH(type); + } + } + else if (type == builtin_type_double) + { + /* floating register alignment -- see ABI */ + if ((num_float_args%2) != 0) + num_float_args += 1; + + num_float_args += 2; /* use up two registers */ + + if (num_float_args > NUM_FLOAT_ARG_REGS) + { + size = ALIGN_ARG(size, TYPE_LENGTH(type)) ; + size += TYPE_LENGTH(type); + } + } + else + { + int len = max (sizeof(long), TYPE_LENGTH(type)); + + num_int_args += 1; + + if (num_int_args > NUM_INT_ARG_REGS) + { + /* see ABI -- in-memory arguments have AT LEAST word alignment */ + if ((TYPE_CODE(type) == TYPE_CODE_INT) || + (TYPE_CODE(type) == TYPE_CODE_ENUM) || + (TYPE_CODE(type) == TYPE_CODE_CHAR) || + (TYPE_CODE(type) == TYPE_CODE_BOOL)) + size = ALIGN_ARG(size, len); + else + size = ALIGN_ARG(size, sizeof(long)); + size += len; + } + } + + } + + + /* recalculate the stack pointer, leaving enough space for the memory argument list and + realigning the stack pointer. */ + if (size != 0) + { + arg_ptr = sp - size; + + arg_ptr = arg_ptr & (-16); /* realign stack */ + write_register (R28,arg_ptr); + sp = arg_ptr; + } + +return (sp); + +} +void i860_extract_return_value(type,regbuf,valbuf) +struct type *type; +char regbuf[REGISTER_BYTES]; +char *valbuf; +{ + register int len = TYPE_LENGTH (type); + double tmp_db; + float tmp_flt; + + if ((TYPE_CODE(type) == TYPE_CODE_FLT)) + { + if (len == sizeof (float)) + { + /* FIXME + NOTE that this assumes that the function declaration was ANSI_CONFORMANT -- + at the present time I can't think of ANY WAY to disambiguate the two following + cases: + float really_does_return_a_float(float ff) + { ...} + and + float actually_returns_a_double(ff) + float ff; + {...} + */ + bcopy ((char *) (regbuf) + REGISTER_BYTE(ADJ_FREG(F8)), (valbuf), TYPE_LENGTH (type)) ; + } + else + bcopy ((char *) (regbuf) + REGISTER_BYTE(F8), (valbuf), TYPE_LENGTH (type)) ; + } + else + bcopy ((char *) (regbuf) + REGISTER_BYTE(R16), (valbuf), TYPE_LENGTH (type)); + +} +void i860_store_return_value(type,valbuf) +struct type *type; +char *valbuf; +{ + register int len = TYPE_LENGTH (type); + double tmp_db; + + if ((TYPE_CODE(type) == TYPE_CODE_FLT) ) + { + write_register_bytes (REGISTER_BYTE (F8), valbuf, len); + } + else + write_register_bytes (REGISTER_BYTE (R16), valbuf, TYPE_LENGTH (type)); + +} diff --git a/gdb/tm-i860.h b/gdb/tm-i860.h new file mode 100644 index 0000000..777ba1d --- /dev/null +++ b/gdb/tm-i860.h @@ -0,0 +1,473 @@ +/* Parameters for execution on the Intel I860 for GDB, the GNU debugger. + Copyright (C) 1986, 1987 Free Software Foundation, Inc. + +GDB is distributed in the hope that it will be useful, but WITHOUT ANY +WARRANTY. No author or distributor accepts responsibility to anyone +for the consequences of using it or for whether it serves any +particular purpose or works at all, unless he says so in writing. +Refer to the GDB General Public License for full details. + +Everyone is granted permission to copy, modify and redistribute GDB, +but only under the conditions described in the GDB General Public +License. A copy of this license is supposed to have been given to you +along with GDB so you can know your rights and responsibilities. It +should be in a file named COPYING. Among other things, the copyright +notice and this notice must be preserved on all copies. + +In other words, go ahead and share GDB, but don't try to stop +anyone else from sharing it farther. Help stamp out software hoarding! +*/ + +#ifndef i860 +#define i860 1 +#endif + +#define HAVE_TERMIO +#define vfork fork + +/* Debugger information will be in COFF format. */ + +/* #define COFF_FORMAT */ +#define COFF_NO_LONG_FILE_NAMES + +/* Offset from address of function to start of its code. + Zero on most machines. */ + +#define FUNCTION_START_OFFSET 0 + +/* The call instruction puts its return address in register r1 and does + not change the stack pointer */ + +#define RETURN_ADDR_IN_REGISTER + +/* Advance PC across any function entry prologue instructions + to reach some "real" code. */ + +#define SKIP_PROLOGUE(pc) \ + { pc = skip_prologue (pc); } + +/* Immediately after a function call, return the saved pc. + Can't go through the frames for this because on some machines + the new frame is not set up until the new function executes + some instructions. */ + +#define SAVED_PC_AFTER_CALL(frame) \ + (read_register(RP_REGNUM)) + +/* Address of end of stack space. */ + +#define STACK_END_ADDR 0xfc000000 + +/* Stack grows downward. */ + +#define INNER_THAN < + +/* Stack has strict alignment. */ + +#define ALIGN_STACK(ADDR) (((ADDR)+15)&-16) + + +/* Sequence of bytes for breakpoint instruction. */ +#if defined(i860) && defined(BIG_ENDIAN) +#define BREAKPOINT {0x44, 0x00, 0x00, 0x00} +#define BREAKFLOAT {0x22, 0x06, 0x00, 0x48} +#else +#define BREAKPOINT {0x00, 0x00, 0x00, 0x44} +#define BREAKFLOAT {0x48, 0x00, 0x06, 0x22} +#endif +/* Amount PC must be decremented by after a breakpoint. + This is often the number of bytes in BREAKPOINT + but not always. */ + +#define DECR_PC_AFTER_BREAK 0 + +/* Nonzero if instruction at PC is a return instruction. */ +/* should be "bri r1" */ +#define ABOUT_TO_RETURN(pc) \ + (adj_read_memory_integer (pc) == 0x40000800) + + +/* Return 1 if P points to an invalid floating point value. */ + +#define INVALID_FLOAT(p, len) 0 /* Just a first guess; not checked */ + +/* Largest integer type */ +#define LONGEST long + +/* Name of the builtin type for the LONGEST type above. */ +#define BUILTIN_TYPE_LONGEST builtin_type_long + +/* Say how long (ordinary) registers are. */ + +#define REGISTER_TYPE long + +/* Number of machine registers */ + +#define NUM_REGS i860REGCOUNT + +/* Initializer for an array of names of registers. + There should be NUM_REGS strings in this initializer. */ +#define REGISTER_NAMES \ +{ \ +"psr", "fir", "trap", "dbrk", \ +"r0", "r1", "sp", "fp", "r4", "r5", "r6", "r7", \ +"r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", \ +"r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23", \ +"r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31", \ + \ +"f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", \ +"f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15", \ +"f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23", \ +"f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31", \ + \ +"fsr", \ +"fsr1", "fsr2", "fsr3", \ +"mul1", "", "mul2", "", "mul3", "", \ +"add1", "", "add2", "", "add3", "", \ +"KI", "", "KR", "", "T", "", \ +"MERGE", "", \ +"pfld1", "", "", "", "pfld2", "", "", "", "pfld3", "", "", "", \ +"graph1", "", \ +"fpe_fp1","", "fpe_fp2", "", "fpe_fp3", "", \ +"fpe_fp4", "", \ +"ieee_stat", "fpe_trapped_op", \ +"fpe_fp5","", "fpe_fp6", "", \ +"fpe_rfsr", "","","", \ +"epsr", \ +"ccr", "bear", "err" \ +} +/* Register numbers of various important registers. + Note that some of these values are "real" register numbers, + and correspond to the general registers of the machine, + and some are "phony" register numbers which are too large + to be actual register numbers as far as the user is concerned + but do serve to get the desired values when passed to read_register. */ + +#define RP_REGNUM R1 /* Contains return address value */ +#define SP_REGNUM SP /* Contains address of top of stack, */ +#define FP_REGNUM FP /* Contains address of executing stack frame */ + /* which is also the bottom of the frame. */ +#define RTRN RP_REGNUM +#define R_FP FP /* used by dwarfread.c */ +#define Y_REGNUM R31 /* Temp register for address calc., etc. */ +#define PC_REGNUM PC /* Contains program counter */ +#define PS_REGNUM PSR /* Contains processor status */ +#define FP0_REGNUM FREGS /* Floating point register 0 */ +#define FPS_REGNUM FSR /* Floating point status register */ +#define DB_REGNUM DB /* Debug register */ + +/* Total amount of space needed to store our copies of the machine's + register state, the array `registers'. */ +#define REGISTER_BYTES (NUM_REGS * 4) + +/* Index within `registers' of the first byte of the space for + register N. */ + +#define REGISTER_BYTE(N) ((N)*4) + +/* Number of bytes of storage in the actual machine representation + for register N. */ + +/* On the i860, all regs are 4 bytes. */ + +#define REGISTER_RAW_SIZE(N) (4) + +/* Number of bytes of storage in the program's representation + for register N. */ + +/* On the i860, all regs are 4 bytes. */ + +#define REGISTER_VIRTUAL_SIZE(N) (4) + +/* Largest value REGISTER_RAW_SIZE can have. */ + +#define MAX_REGISTER_RAW_SIZE 8 + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ + +#define MAX_REGISTER_VIRTUAL_SIZE 8 + +/* Nonzero if register N requires conversion + from raw format to virtual format. */ + +#define REGISTER_CONVERTIBLE(N) (0) + +/* Convert data from raw format for register REGNUM + to virtual format for register REGNUM. */ + +#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,FROM,TO) \ +{ bcopy ((FROM), (TO), 4); } + +/* Convert data from virtual format for register REGNUM + to raw format for register REGNUM. */ + +#define REGISTER_CONVERT_TO_RAW(REGNUM,FROM,TO) \ +{ bcopy ((FROM), (TO), 4); } + +/* Return the GDB type object for the "standard" data type + of data in register N. */ + +#define REGISTER_VIRTUAL_TYPE(N) \ + ((N) < F0 ? builtin_type_int : (N) <= F31 ? builtin_type_float : builtin_type_int) + +/* Store the address of the place in which to copy the structure the + subroutine will return. This is called from call_function. */ + +#define STORE_STRUCT_RETURN(ADDR, SP) { write_register (R16, (ADDR)); } + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ + +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ + i860_extract_return_value(TYPE, REGBUF, VALBUF) + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. */ +/* On i860, values are returned in register r16. */ +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + i860_store_return_value(TYPE, VALBUF) + +/* Extract from an array REGBUF containing the (raw) register state + the address in which a function should return its structure value, + as a CORE_ADDR (or an expression that can be used as one). */ + +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \ + (*(int *) ((REGBUF) + REGISTER_BYTE(R16))) + + +/* Describe the pointer in each stack frame to the previous stack frame + (its caller). */ +#include +#include +#include "i860_reg.h" + +/* FRAME_CHAIN takes a frame's nominal address + and produces the frame's chain-pointer. + + FRAME_CHAIN_COMBINE takes the chain pointer and the frame's nominal address + and produces the nominal address of the caller frame. + + However, if FRAME_CHAIN_VALID returns zero, + it means the given frame is the outermost one and has no caller. + In that case, FRAME_CHAIN_COMBINE is not used. */ + +/* In the case of the i860, the frame-chain's nominal address + is held in the frame pointer register. + + On the i860 the frame (in %fp) points to %fp for the previous frame. + */ + +/* our FRAME_CHAIN requires a pointer to all the frame info (e.g. pc) + + */ + +#define FRAME_CHAIN(thisframe) frame_chain(thisframe) + +#define FRAME_CHAIN_COMBINE(chain, thisframe) (chain) + +/* Define other aspects of the stack frame. */ + +#define FRAME_SAVED_PC(frame_struct) frame_saved_pc(frame_struct) + +#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame) + +#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame) + +/* Set VAL to the number of args passed to frame described by FI. + Can set VAL to -1, meaning no way to tell. */ + +/* We can't tell how many args there are */ + +#define FRAME_NUM_ARGS(val,fi) (val = -1) + +#define FRAME_STRUCT_ARGS_ADDRESS(fi) ((fi)->frame) + +/* extra stuff in frame structure to support + * backtraceing thru non fp frame based frames + * (trace stuff thats not -g compiled) + */ + +#define EXTRA_FRAME_INFO int is_minus_g; CORE_ADDR sp; CORE_ADDR rp; + +#define INIT_EXTRA_FRAME_INFO(fromleaf,fci) (fci)->is_minus_g = 0; (fci)->sp = 0; (fci)->rp = 0; + +/* Return number of bytes at start of arglist that are not really args. */ + +#define FRAME_ARGS_SKIP 8 + +/* Put here the code to store, into a struct frame_saved_regs, + the addresses of the saved registers of frame described by FRAME_INFO. + This includes special registers such as pc and fp saved in special + ways in the stack frame. sp is even more special: + the address we return for it IS the sp for the next frame. */ + +/* Grind through the various st.l rx,Y(fp) and fst.z fx,Y(fp) */ + +#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \ + frame_find_saved_regs(frame_info, &(frame_saved_regs)) + +/* Things needed for making the inferior call functions. */ + +/* Push an empty stack frame, to record the current PC, etc. */ +/* We have this frame with fp pointing to a block where all GDB-visible + registers are stored in the order GDB knows them, and sp at the next + alignment point below fp. Note: fp + NUM_REGS*4 was the old sp + */ + +#define PUSH_DUMMY_FRAME i860_push_frame() + +/* Discard from the stack the innermost frame, + restoring all saved registers. */ + +#define POP_FRAME i860_pop_frame() + +/* This sequence of words is the instructions: + *../ +-- + nop + calli r31 + nop + trap r0,r0,r0 +-- +Note this is 16 bytes. +Saving of the registers is done by PUSH_DUMMY_FRAME. The address of the +function to call will be placed in register r31 prior to starting. +The arguments have to be put into the parameter registers by GDB after +the PUSH_DUMMY_FRAME is done. NOTE: GDB expects to push arguments, but +i860 takes them in registers */ +#ifdef BIG_ENDIAN +/* account for reversal of instructions in memory */ + +#define CALL_DUMMY { \ + 0x4c00f802, 0xa0000000, 0x44000000, 0xa0000000 } +#else +#define CALL_DUMMY { \ + 0xa0000000, 0x4c00F802, 0xa0000000, 0x44000000 } +#endif + +/* This setup is somewhat unusual. PUSH_DUMMY_FRAME and + FRAME_FIND_SAVED_REGS conspire to handle dummy frames differently. + Therefore, CALL_DUMMY can be minimal. We put the address of the called + function in r31 and let'er rip */ + +#define CALL_DUMMY_LENGTH 16 + +/* Actually start at the calli */ + +#define CALL_DUMMY_START_OFFSET 4 + +/* Normally, GDB will patch the dummy code here to put in the function + address, etc., but we only need to put the call adddress in r31 */ +#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \ + write_register(R31, fun) + + +/* i860 has no reliable single step ptrace call */ + +#define NO_SINGLE_STEP 1 + +#define KERNEL_U_ADDR 0xfc7fe530 +#define REGISTER_U_ADDR(addr,ar0,regno) \ + addr = (REGISTER_BYTE(regno) + ar0 ); + +/* How many bytes are pushed on the stack for the argument list + */ +#define STACK_ARG_BYTES(RESULT,ARGS,NARGS,STRUCT_RETURN) {(RESULT) = 0;} + +/* Pass arguments to a function + */ + +#define PUSH_ARGUMENTS(NARGS,ARGS,STACKP,STRUCT_RETURN,STRUCT_ADDR) \ + { \ + STACKP = (STACKP) & (-16); \ + STACKP = i860_arg_coerce(NARGS, ARGS, STRUCT_RETURN,STACKP); \ + STACKP =pass_function_arguments(ARGS,NARGS,STRUCT_RETURN, STRUCT_ADDR, STACKP); } + +#define CALL_DUMMY_LOCATION AFTER_TEXT_END + +#define NEED_TEXT_START_END + +#define NONSTANDARD_MEMORY_LAYOUT + +/* We support pseudo-frame structure so actual frame pointer value must be + * read from the register. + */ +#define FP_FROM_REGISTER + +/* Support a quit from info register command because we have so many regs + */ +#define INFO_REGISTER_QUIT + +/* Identify text or absolute symbols to put in misc function table. In the + * i860 case, only text symbols not starting with _L00 + */ +#define MISC_FUNCTION(cs) ((cs)->c_secnum == 1 && (cs)->c_value && \ + strncmp((cs)->c_name, "_L00", 4) != 0) + +/* Define our a.out magic number and undefine the 386 one if it's defined + */ +#ifdef I860MAGIC +#define AOUT_MAGIC I860MAGIC +#else +#define AOUT_MAGIC 0515 +#endif + +#ifdef I386MAGIC +#undef I386MAGIC +#endif + +/* The aouthdr may be larger than defined in a.out.h + */ +#define AOUTHDR_VARIABLE + +/* We have a bug where lineno information is not in symbol table correctly + */ +#define LINENO_BUG + +/* Similarly, the Endndx of a structure definition is bogus in ld860 + */ + /* #define STRUCT_SYMBOL_BUG */ + +/* Also, we see T_ARG types when we shouldn't + */ +#define T_ARG_BUG + +/* Macro to sign extend to 32 bits */ +#define SIGN_EXT(n,x) (((int) (x) << (32-n)) >> (32-n)) + +#define SIGN_EXT16(x) (((int) (x) << (16)) >> (16)) + +#define FRAMELESS_FUNCTION_INVOCATION(FI,FRAMELESS) frameless_look_for_prologue(FI) +#if defined(i860) && defined(BIG_ENDIAN) +#define ADJ_PC(pc) ((unsigned)pc ^ 4) +#define ADJ_FREG(freg) (F0 + (((freg) - F0) ^ 1)) +#define ADJ_FREG_BYTE(freg) (REGISTER_BYTE(F0) + (((freg) - REGISTER_BYTE(F0)) ^ REGISTER_BYTE(1))) +#else +#define ADJ_PC(pc) (pc) +#define ADJ_FREG(freg) (freg) +#define ADJ_FREG_BYTE(freg) (freg) +#endif +/* define DO_REGISTERS_INFO to do i860-specific formatting */ +#define DO_REGISTERS_INFO(regnum,fpregs) i860_do_registers_info(regnum,fpregs) +/* the two low order bits of the return pointer are ignored when returning; some systems store information + in them. To avoid confusing the stack trace, provide this macro to "clean" the two low order bits */ +#define CLEAN_PC(pc) ((unsigned) pc & 0xfffffffc) +#define adj_target_read_memory(memaddr,myaddr,len) target_read_memory(ADJ_PC(memaddr),myaddr,len) +#define adj_target_write_memory(memaddr,myaddr,len) target_write_memory(ADJ_PC(memaddr),myaddr,len) +#define adj_read_memory_integer(memaddr) read_memory_integer(ADJ_PC(memaddr),4) +#define adj_read_memory(memaddr,myaddr,len) read_memory(ADJ_PC(memaddr),myaddr,len) +#define adj_write_memory(memaddr,myaddr,len) write_memory(ADJ_PC(memaddr),myaddr,len) +#define INIT_FRAME_PC(fromleaf, prev) \ + { struct frame_info *nextframe = prev->next; \ + if (nextframe->rp) \ + { prev->pc = CLEAN_PC( nextframe ->rp); \ + prev->rp = 0; } \ + else prev->pc = CLEAN_PC((fromleaf ? SAVED_PC_AFTER_CALL (prev->next) : \ + prev->next ? FRAME_SAVED_PC (prev->next) : read_pc ())); } + +#define INTERNAL_REGISTER_VAL(regno) regno+R0 +/* used to indicate that the misc function vector has size information about + misc functions -- currently true for elf format only -- mlf */ +#define MISC_FUNCTIONS_HAS_SIZE +#define GET_BASEREG_VALUE(frame,basereg) get_saved_basereg(frame, basereg); diff --git a/gdb/xm-i860.h b/gdb/xm-i860.h new file mode 100644 index 0000000..9840081 --- /dev/null +++ b/gdb/xm-i860.h @@ -0,0 +1,21 @@ +/* Macro definitions for running gdb on host machines with i860 cpu's. + Copyright (C) 1991, Free Software Foundation, Inc. + Written by Peggy Fieland @ stratus.com + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + + -- cgit v1.1