From 383f0f5b9a5fa97db053fb6506e07f5e73eb4993 Mon Sep 17 00:00:00 2001 From: Jim Blandy Date: Tue, 11 May 2004 04:55:32 +0000 Subject: * ppc-tdep.h (struct gdbarch_tdep): Change definition of ppc_fp0_regnum and ppc_fpscr_regnum: if they are -1, then this processor variant lacks those registers. (ppc_floating_point_unit_p): Change description to make it clear that this returns info about the ISA, not the ABI. * rs6000-tdep.c (ppc_floating_point_unit_p): Decide whether to return true or false by checking tdep->ppc_fp0_regnum and tdep->ppc_fpscr_regnum. The original code replicated the BFD arch/mach switching done in rs6000_gdbarch_init; it's better to keep that logic there, and just check the results here. (rs6000_gdbarch_init): On the E500, set tdep->ppc_fp0_regnum and tdep->ppc_fpscr_regnum to -1 to indicate that we have no floating-point registers. (ppc_supply_fpregset, ppc_collect_fpregset) (rs6000_push_dummy_call, rs6000_extract_return_value) (rs6000_store_return_value): Assert that we have floating-point registers. (rs6000_dwarf2_stab_reg_to_regnum): Add FIXME. (rs6000_frame_cache): Don't note the locations at which floating-point registers were saved if we have no fprs. * aix-thread.c (supply_fprs, fill_fprs): Assert that we have FP registers. (fetch_regs_user_thread, fetch_regs_kernel_thread) (store_regs_user_thread, store_regs_kernel_thread): Only call supply_fprs / fill_fprs if we actually have floating-point registers. (special_register_p): Check ppc_fpscr_regnum before matching against it. (supply_sprs64, supply_sprs32, fill_sprs64, fill_sprs32): Don't supply / collect fpscr if we don't have it. * ppc-bdm.c: #include "gdb_assert.h". (bdm_ppc_fetch_registers, bdm_ppc_store_registers): Assert that we have floating-point registers, since I can't test this code on FP-free systems to adapt it. * ppc-linux-nat.c (ppc_register_u_addr): Don't match against the fpscr and floating point register numbers if they don't exist. (fetch_register): Assert that we have floating-point registers before we reach the code that handles them. (store_register): Same. And use tdep instead of calling gdbarch_tdep again. (fill_fpregset): Don't try to collect FP registers and fpscr if we don't have them. (ppc_linux_sigtramp_cache): Don't record the saved locations of fprs and fpscr if we don't have them. (ppc_linux_supply_fpregset): Don't supply fp regs and fpscr if we don't have them. * ppcnbsd-nat.c: #include "gdb_assert.h". (getfpregs_supplies): Assert that we have floating-point registers. * ppcnbsd-tdep.c (ppcnbsd_supply_fpreg, ppcnbsd_fill_fpreg): Same. * ppcobsd-tdep.c: #include "gdb_assert.h". (ppcobsd_supply_gregset, ppcobsd_collect_gregset): Assert that we have floating-point registers. * rs6000-nat.c (regmap): Don't match against the fpscr and floating point register numbers if they don't exist. (fetch_inferior_registers, store_inferior_registers, fetch_core_registers): Only fetch / store / supply the floating-point registers and the fpscr if we have them. * Makefile.in (ppc-bdm.o, ppc-linux-nat.o, ppcnbsd-nat.o) (ppcobsd-tdep.o): Update dependencies. --- gdb/ChangeLog | 62 ++++++++++++++++++++++++++++++++++++++++++++++++++++ gdb/Makefile.in | 12 +++++----- gdb/aix-thread.c | 42 ++++++++++++++++++++++++----------- gdb/ppc-bdm.c | 13 +++++++++++ gdb/ppc-linux-nat.c | 32 ++++++++++++++++++++------- gdb/ppc-linux-tdep.c | 23 ++++++++++++------- gdb/ppc-tdep.h | 8 +++++-- gdb/ppcnbsd-nat.c | 13 +++++++++++ gdb/ppcnbsd-tdep.c | 24 ++++++++++++++++++++ gdb/ppcobsd-tdep.c | 25 +++++++++++++++++++++ gdb/rs6000-nat.c | 42 +++++++++++++++++++++-------------- gdb/rs6000-tdep.c | 54 +++++++++++++++++++++++++++++++++++---------- 12 files changed, 285 insertions(+), 65 deletions(-) (limited to 'gdb') diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 33ac737..b58dca2 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,65 @@ +2004-05-10 Jim Blandy + + * ppc-tdep.h (struct gdbarch_tdep): Change definition of + ppc_fp0_regnum and ppc_fpscr_regnum: if they are -1, then this + processor variant lacks those registers. + (ppc_floating_point_unit_p): Change description to make it clear + that this returns info about the ISA, not the ABI. + * rs6000-tdep.c (ppc_floating_point_unit_p): Decide whether to + return true or false by checking tdep->ppc_fp0_regnum and + tdep->ppc_fpscr_regnum. The original code replicated the BFD + arch/mach switching done in rs6000_gdbarch_init; it's better to + keep that logic there, and just check the results here. + (rs6000_gdbarch_init): On the E500, set tdep->ppc_fp0_regnum and + tdep->ppc_fpscr_regnum to -1 to indicate that we have no + floating-point registers. + (ppc_supply_fpregset, ppc_collect_fpregset) + (rs6000_push_dummy_call, rs6000_extract_return_value) + (rs6000_store_return_value): Assert that we have floating-point + registers. + (rs6000_dwarf2_stab_reg_to_regnum): Add FIXME. + (rs6000_frame_cache): Don't note the locations at which + floating-point registers were saved if we have no fprs. + * aix-thread.c (supply_fprs, fill_fprs): Assert that we have FP + registers. + (fetch_regs_user_thread, fetch_regs_kernel_thread) + (store_regs_user_thread, store_regs_kernel_thread): Only call + supply_fprs / fill_fprs if we actually have floating-point + registers. + (special_register_p): Check ppc_fpscr_regnum before matching + against it. + (supply_sprs64, supply_sprs32, fill_sprs64, fill_sprs32): Don't + supply / collect fpscr if we don't have it. + * ppc-bdm.c: #include "gdb_assert.h". + (bdm_ppc_fetch_registers, bdm_ppc_store_registers): Assert that we + have floating-point registers, since I can't test this code on + FP-free systems to adapt it. + * ppc-linux-nat.c (ppc_register_u_addr): Don't match against the + fpscr and floating point register numbers if they don't exist. + (fetch_register): Assert that we have floating-point registers + before we reach the code that handles them. + (store_register): Same. And use tdep instead of calling + gdbarch_tdep again. + (fill_fpregset): Don't try to collect FP registers and fpscr if we + don't have them. + (ppc_linux_sigtramp_cache): Don't record the saved locations of + fprs and fpscr if we don't have them. + (ppc_linux_supply_fpregset): Don't supply fp regs and fpscr if we + don't have them. + * ppcnbsd-nat.c: #include "gdb_assert.h". + (getfpregs_supplies): Assert that we have floating-point registers. + * ppcnbsd-tdep.c (ppcnbsd_supply_fpreg, ppcnbsd_fill_fpreg): Same. + * ppcobsd-tdep.c: #include "gdb_assert.h". + (ppcobsd_supply_gregset, ppcobsd_collect_gregset): Assert that we + have floating-point registers. + * rs6000-nat.c (regmap): Don't match against the fpscr and + floating point register numbers if they don't exist. + (fetch_inferior_registers, store_inferior_registers, + fetch_core_registers): Only fetch / store / supply the + floating-point registers and the fpscr if we have them. + * Makefile.in (ppc-bdm.o, ppc-linux-nat.o, ppcnbsd-nat.o) + (ppcobsd-tdep.o): Update dependencies. + 2004-05-10 Andrew Cagney * infrun.c (through_sigtramp_breakpoint): Delete variable. diff --git a/gdb/Makefile.in b/gdb/Makefile.in index 4497fa8..151cb1d 100644 --- a/gdb/Makefile.in +++ b/gdb/Makefile.in @@ -2148,26 +2148,26 @@ p-lang.o: p-lang.c $(defs_h) $(gdb_string_h) $(symtab_h) $(gdbtypes_h) \ ppc-bdm.o: ppc-bdm.c $(defs_h) $(gdbcore_h) $(gdb_string_h) $(frame_h) \ $(inferior_h) $(bfd_h) $(symfile_h) $(target_h) $(gdbcmd_h) \ $(objfiles_h) $(gdb_stabs_h) $(serial_h) $(ocd_h) $(ppc_tdep_h) \ - $(regcache_h) + $(regcache_h) $(gdb_assert_h) ppcbug-rom.o: ppcbug-rom.c $(defs_h) $(gdbcore_h) $(target_h) $(monitor_h) \ $(serial_h) $(regcache_h) ppc-linux-nat.o: ppc-linux-nat.c $(defs_h) $(gdb_string_h) $(frame_h) \ - $(inferior_h) $(gdbcore_h) $(regcache_h) $(gdb_wait_h) $(gregset_h) \ - $(ppc_tdep_h) + $(inferior_h) $(gdbcore_h) $(regcache_h) $(gdb_assert_h) \ + $(gdb_wait_h) $(gregset_h) $(ppc_tdep_h) ppc-linux-tdep.o: ppc-linux-tdep.c $(defs_h) $(frame_h) $(inferior_h) \ $(symtab_h) $(target_h) $(gdbcore_h) $(gdbcmd_h) $(symfile_h) \ $(objfiles_h) $(regcache_h) $(value_h) $(osabi_h) $(regset_h) \ $(solib_svr4_h) $(ppc_tdep_h) $(trad_frame_h) $(frame_unwind_h) ppcnbsd-nat.o: ppcnbsd-nat.c $(defs_h) $(inferior_h) $(ppc_tdep_h) \ - $(ppcnbsd_tdep_h) + $(ppcnbsd_tdep_h) $(gdb_assert_h) ppcnbsd-tdep.o: ppcnbsd-tdep.c $(defs_h) $(gdbcore_h) $(regcache_h) \ $(target_h) $(breakpoint_h) $(value_h) $(osabi_h) $(ppc_tdep_h) \ $(ppcnbsd_tdep_h) $(nbsd_tdep_h) $(solib_svr4_h) ppcobsd-nat.o: ppcobsd-nat.c $(defs_h) $(inferior_h) $(regcache_h) \ $(ppc_tdep_h) $(ppcobsd_tdep_h) ppcobsd-tdep.o: ppcobsd-tdep.c $(defs_h) $(arch_utils_h) $(osabi_h) \ - $(regcache_h) $(regset_h) $(gdb_string_h) $(ppc_tdep_h) \ - $(ppcobsd_tdep_h) $(solib_svr4_h) + $(regcache_h) $(regset_h) $(gdb_assert_h) $(gdb_string_h) \ + $(ppc_tdep_h) $(ppcobsd_tdep_h) $(solib_svr4_h) ppc-sysv-tdep.o: ppc-sysv-tdep.c $(defs_h) $(gdbcore_h) $(inferior_h) \ $(regcache_h) $(value_h) $(gdb_string_h) $(gdb_assert_h) \ $(ppc_tdep_h) $(target_h) $(objfiles_h) diff --git a/gdb/aix-thread.c b/gdb/aix-thread.c index 2f79071..dcaa3fb 100644 --- a/gdb/aix-thread.c +++ b/gdb/aix-thread.c @@ -1023,6 +1023,10 @@ supply_fprs (double *vals) struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); int regno; + /* This function should never be called on architectures without + floating-point registers. */ + gdb_assert (ppc_floating_point_p (current_gdbarch)); + for (regno = 0; regno < 32; regno++) supply_register (regno + tdep->ppc_fp0_regnum, (char *) (vals + regno)); } @@ -1039,7 +1043,7 @@ special_register_p (int regno) || regno == tdep->ppc_lr_regnum || regno == tdep->ppc_ctr_regnum || regno == tdep->ppc_xer_regnum - || regno == tdep->ppc_fpscr_regnum + || (tdep->ppc_fpscr_regnum >= 0 && regno == tdep->ppc_fpscr_regnum) || (tdep->ppc_mq_regnum >= 0 && regno == tdep->ppc_mq_regnum); } @@ -1060,7 +1064,8 @@ supply_sprs64 (uint64_t iar, uint64_t msr, uint32_t cr, supply_register (tdep->ppc_lr_regnum, (char *) &lr); supply_register (tdep->ppc_ctr_regnum, (char *) &ctr); supply_register (tdep->ppc_xer_regnum, (char *) &xer); - supply_register (tdep->ppc_fpscr_regnum, (char *) &fpscr); + if (tdep->ppc_fpscr_regnum >= 0) + supply_register (tdep->ppc_fpscr_regnum, (char *) &fpscr); } /* Record that the special registers contain the specified 32-bit @@ -1079,7 +1084,8 @@ supply_sprs32 (uint32_t iar, uint32_t msr, uint32_t cr, supply_register (tdep->ppc_lr_regnum, (char *) &lr); supply_register (tdep->ppc_ctr_regnum, (char *) &ctr); supply_register (tdep->ppc_xer_regnum, (char *) &xer); - supply_register (tdep->ppc_fpscr_regnum, (char *) &fpscr); + if (tdep->ppc_fpscr_regnum >= 0) + supply_register (tdep->ppc_fpscr_regnum, (char *) &fpscr); } /* Fetch all registers from pthread PDTID, which doesn't have a kernel @@ -1113,7 +1119,8 @@ fetch_regs_user_thread (pthdb_pthread_t pdtid) /* Floating-point registers. */ - supply_fprs (ctx.fpr); + if (ppc_floating_point_p (current_gdbarch)) + supply_fprs (ctx.fpr); /* Special registers. */ @@ -1179,9 +1186,10 @@ fetch_regs_kernel_thread (int regno, pthdb_tid_t tid) /* Floating-point registers. */ - if (regno == -1 - || (regno >= tdep->ppc_fp0_regnum - && regno < tdep->ppc_fp0_regnum + ppc_num_fprs)) + if (ppc_floating_point_unit_p (current_gdbarch) + && (regno == -1 + || (regno >= tdep->ppc_fp0_regnum + && regno < tdep->ppc_fp0_regnum + ppc_num_fprs))) { if (!ptrace32 (PTT_READ_FPRS, tid, (int *) fprs, 0, NULL)) memset (fprs, 0, sizeof (fprs)); @@ -1271,6 +1279,10 @@ fill_fprs (double *vals) struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); int regno; + /* This function should never be called on architectures without + floating-point registers. */ + gdb_assert (ppc_floating_point_p (current_gdbarch)); + for (regno = tdep->ppc_fp0_regnum; regno < tdep->ppc_fp0_regnum + ppc_num_fprs; regno++) @@ -1307,7 +1319,8 @@ fill_sprs64 (uint64_t *iar, uint64_t *msr, uint32_t *cr, regcache_collect (tdep->ppc_ctr_regnum, ctr); if (register_cached (tdep->ppc_xer_regnum)) regcache_collect (tdep->ppc_xer_regnum, xer); - if (register_cached (tdep->ppc_fpscr_regnum)) + if (tdep->ppc_fpscr_regnum >= 0 + && register_cached (tdep->ppc_fpscr_regnum)) regcache_collect (tdep->ppc_fpscr_regnum, fpscr); } @@ -1342,7 +1355,8 @@ fill_sprs32 (unsigned long *iar, unsigned long *msr, unsigned long *cr, regcache_collect (tdep->ppc_ctr_regnum, ctr); if (register_cached (tdep->ppc_xer_regnum)) regcache_collect (tdep->ppc_xer_regnum, xer); - if (register_cached (tdep->ppc_fpscr_regnum)) + if (tdep->ppc_fpscr_regnum >= 0 + && register_cached (tdep->ppc_fpscr_regnum)) regcache_collect (tdep->ppc_fpscr_regnum, fpscr); } @@ -1390,7 +1404,8 @@ store_regs_user_thread (pthdb_pthread_t pdtid) } /* Collect floating-point register values from the regcache. */ - fill_fprs (ctx.fpr); + if (ppc_floating_point_p (current_gdbarch)) + fill_fprs (ctx.fpr); /* Special registers (always kept in ctx as 64 bits). */ if (arch64) @@ -1480,9 +1495,10 @@ store_regs_kernel_thread (int regno, pthdb_tid_t tid) /* Floating-point registers. */ - if (regno == -1 - || (regno >= tdep->ppc_fp0_regnum - && regno < tdep->ppc_fp0_regnum + ppc_num_fprs)) + if (ppc_floating_point_unit_p (current_gdbarch) + && (regno == -1 + || (regno >= tdep->ppc_fp0_regnum + && regno < tdep->ppc_fp0_regnum + ppc_num_fprs))) { /* Pre-fetch: some regs may not be in the cache. */ ptrace32 (PTT_READ_FPRS, tid, (int *) fprs, 0, NULL); diff --git a/gdb/ppc-bdm.c b/gdb/ppc-bdm.c index 59fac1f..cf37b2e 100644 --- a/gdb/ppc-bdm.c +++ b/gdb/ppc-bdm.c @@ -37,6 +37,7 @@ #include "ocd.h" #include "ppc-tdep.h" #include "regcache.h" +#include "gdb_assert.h" static void bdm_ppc_open (char *name, int from_tty); @@ -193,6 +194,12 @@ bdm_ppc_fetch_registers (int regno) return; /* Unsupported register */ } + /* FIXME: jimb/2004-05-04: I'm not sure how to adapt this code to + processors that lack floating point registers, and I don't have + have the equipment to test it. So we'll leave that case for the + next person who encounters it. */ + gdb_assert (ppc_floating_point_unit_p (current_gdbarch)); + #if 1 /* Can't ask for floating point regs on ppc 8xx, also need to avoid asking for the mq register. */ @@ -287,6 +294,12 @@ bdm_ppc_store_registers (int regno) if (first_bdm_regno == -1) return; /* Unsupported register */ + /* FIXME: jimb/2004-05-04: I'm not sure how to adapt this code to + processors that lack floating point registers, and I don't have + have the equipment to test it. So we'll leave that case for the + next person who encounters it. */ + gdb_assert (ppc_floating_point_unit_p (current_gdbarch)); + for (i = first_regno; i <= last_regno; i++) { int bdm_regno; diff --git a/gdb/ppc-linux-nat.c b/gdb/ppc-linux-nat.c index 6d64665..460d48a 100644 --- a/gdb/ppc-linux-nat.c +++ b/gdb/ppc-linux-nat.c @@ -26,6 +26,7 @@ #include "inferior.h" #include "gdbcore.h" #include "regcache.h" +#include "gdb_assert.h" #include #include @@ -139,7 +140,8 @@ ppc_register_u_addr (int regno) /* Floating point regs: eight bytes each in both 32- and 64-bit ptrace interfaces. Thus, two slots each in 32-bit interface, one slot each in 64-bit interface. */ - if (regno >= tdep->ppc_fp0_regnum + if (tdep->ppc_fp0_regnum >= 0 + && regno >= tdep->ppc_fp0_regnum && regno < tdep->ppc_fp0_regnum + ppc_num_fprs) u_addr = (PT_FPR0 * wordsize) + ((regno - tdep->ppc_fp0_regnum) * 8); @@ -160,7 +162,8 @@ ppc_register_u_addr (int regno) #endif if (regno == tdep->ppc_ps_regnum) u_addr = PT_MSR * wordsize; - if (regno == tdep->ppc_fpscr_regnum) + if (tdep->ppc_fpscr_regnum >= 0 + && regno == tdep->ppc_fpscr_regnum) u_addr = PT_FPSCR * wordsize; return u_addr; @@ -234,6 +237,11 @@ fetch_register (int tid, int regno) return; } + /* If the current architecture has no floating-point registers, we + should never reach this point: ppc_register_u_addr should have + returned -1, and we should have caught that above. */ + gdb_assert (ppc_floating_point_unit_p (current_gdbarch)); + /* Read the raw register using PTRACE_XFER_TYPE sized chunks. On a 32-bit platform, 64-bit floating-point registers will require two transfers. */ @@ -412,6 +420,11 @@ store_register (int tid, int regno) if (regaddr == -1) return; + /* If the current architecture has no floating-point registers, we + should never reach this point: ppc_register_u_addr should have + returned -1, and we should have caught that above. */ + gdb_assert (ppc_floating_point_unit_p (current_gdbarch)); + /* First collect the register value from the regcache. Be careful to to convert the regcache's wordsize into ptrace's wordsize. */ memset (buf, 0, sizeof buf); @@ -436,7 +449,7 @@ store_register (int tid, int regno) regaddr += sizeof (PTRACE_XFER_TYPE); if (errno == EIO - && regno == gdbarch_tdep (current_gdbarch)->ppc_fpscr_regnum) + && regno == tdep->ppc_fpscr_regnum) { /* Some older kernel versions don't allow fpscr to be written. */ continue; @@ -620,11 +633,14 @@ fill_fpregset (gdb_fpregset_t *fpregsetp, int regno) struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); bfd_byte *fpp = (void *) fpregsetp; - for (regi = 0; regi < 32; regi++) + if (ppc_floating_point_unit_p (current_gdbarch)) { - if ((regno == -1) || (regno == tdep->ppc_fp0_regnum + regi)) - regcache_collect (tdep->ppc_fp0_regnum + regi, fpp + 8 * regi); + for (regi = 0; regi < ppc_num_fprs; regi++) + { + if ((regno == -1) || (regno == tdep->ppc_fp0_regnum + regi)) + regcache_collect (tdep->ppc_fp0_regnum + regi, fpp + 8 * regi); + } + if (regno == -1 || regno == tdep->ppc_fpscr_regnum) + right_fill_reg (tdep->ppc_fpscr_regnum, (fpp + 8 * 32)); } - if ((regno == -1) || regno == tdep->ppc_fpscr_regnum) - right_fill_reg (tdep->ppc_fpscr_regnum, (fpp + 8 * 32)); } diff --git a/gdb/ppc-linux-tdep.c b/gdb/ppc-linux-tdep.c index 94c67f1..49f4ad6 100644 --- a/gdb/ppc-linux-tdep.c +++ b/gdb/ppc-linux-tdep.c @@ -944,12 +944,16 @@ ppc_linux_sigtramp_cache (struct frame_info *next_frame, void **this_cache) cache->saved_regs[tdep->ppc_cr_regnum].addr = gpregs + 38 * tdep->wordsize; /* Floating point registers. */ - for (i = 0; i < 32; i++) + if (ppc_floating_point_unit_p (gdbarch)) { - int regnum = i + tdep->ppc_fp0_regnum; - cache->saved_regs[regnum].addr = fpregs + i * tdep->wordsize; + for (i = 0; i < ppc_num_fprs; i++) + { + int regnum = i + tdep->ppc_fp0_regnum; + cache->saved_regs[regnum].addr = fpregs + i * tdep->wordsize; + } + cache->saved_regs[tdep->ppc_fpscr_regnum].addr + = fpregs + 32 * tdep->wordsize; } - cache->saved_regs[tdep->ppc_fpscr_regnum].addr = fpregs + 32 * tdep->wordsize; return cache; } @@ -1018,15 +1022,18 @@ ppc_linux_supply_fpregset (const struct regset *regset, struct gdbarch_tdep *regcache_tdep = gdbarch_tdep (regcache_arch); const bfd_byte *buf = fpset; - for (regi = 0; regi < 32; regi++) + if (! ppc_floating_point_unit_p (regcache_arch)) + return; + + for (regi = 0; regi < ppc_num_fprs; regi++) regcache_raw_supply (regcache, regcache_tdep->ppc_fp0_regnum + regi, buf + 8 * regi); - /* The FPSCR is stored in the low order word of the last doubleword in the - fpregset. */ + /* The FPSCR is stored in the low order word of the last + doubleword in the fpregset. */ regcache_raw_supply (regcache, regcache_tdep->ppc_fpscr_regnum, - buf + 8 * 32 + 4); + buf + 8 * 32 + 4); } static struct regset ppc_linux_fpregset = { NULL, ppc_linux_supply_fpregset }; diff --git a/gdb/ppc-tdep.h b/gdb/ppc-tdep.h index 9bfb68e..a47fdfc 100644 --- a/gdb/ppc-tdep.h +++ b/gdb/ppc-tdep.h @@ -74,8 +74,8 @@ enum return_value_convention ppc64_sysv_abi_return_value (struct gdbarch *gdbarc /* From rs6000-tdep.c... */ int altivec_register_p (int regno); -/* Return non-zero when the architecture has an FPU (or at least when - the ABI is using the FPU). */ +/* Return non-zero if the architecture described by GDBARCH has + floating-point registers (f0 --- f31 and fpscr). */ int ppc_floating_point_unit_p (struct gdbarch *gdbarch); /* Register set description. */ @@ -150,9 +150,13 @@ struct gdbarch_tdep int ppc_lr_regnum; /* Link register */ int ppc_ctr_regnum; /* Count register */ int ppc_xer_regnum; /* Integer exception register */ + + /* On PPC and RS6000 variants that have no floating-point + registers, the next two members will be -1. */ int ppc_fp0_regnum; /* floating-point register 0 */ int ppc_fpscr_regnum; /* Floating point status and condition register */ + int ppc_mq_regnum; /* Multiply/Divide extension register */ int ppc_vr0_regnum; /* First AltiVec register */ int ppc_vrsave_regnum; /* Last AltiVec register */ diff --git a/gdb/ppcnbsd-nat.c b/gdb/ppcnbsd-nat.c index 9b7a550..037b8d7 100644 --- a/gdb/ppcnbsd-nat.c +++ b/gdb/ppcnbsd-nat.c @@ -25,6 +25,7 @@ #include "defs.h" #include "inferior.h" +#include "gdb_assert.h" #include "ppc-tdep.h" #include "ppcnbsd-tdep.h" @@ -49,6 +50,18 @@ getfpregs_supplies (int regno) { struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); + /* FIXME: jimb/2004-05-05: Some PPC variants don't have floating + point registers. Traditionally, GDB's register set has still + listed the floating point registers for such machines, so this + code is harmless. However, the new E500 port actually omits the + floating point registers entirely from the register set --- they + don't even have register numbers assigned to them. + + It's not clear to me how best to update this code, so this assert + will alert the first person to encounter the NetBSD/E500 + combination to the problem. */ + gdb_assert (ppc_floating_point_unit_p (current_gdbarch)); + return ((regno >= tdep->ppc_fp0_regnum && regno < tdep->ppc_fp0_regnum + ppc_num_fprs) || regno == tdep->ppc_fpscr_regnum); diff --git a/gdb/ppcnbsd-tdep.c b/gdb/ppcnbsd-tdep.c index 891b74fc..30a8375 100644 --- a/gdb/ppcnbsd-tdep.c +++ b/gdb/ppcnbsd-tdep.c @@ -111,6 +111,18 @@ ppcnbsd_supply_fpreg (char *fpregs, int regno) struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); int i; + /* FIXME: jimb/2004-05-05: Some PPC variants don't have floating + point registers. Traditionally, GDB's register set has still + listed the floating point registers for such machines, so this + code is harmless. However, the new E500 port actually omits the + floating point registers entirely from the register set --- they + don't even have register numbers assigned to them. + + It's not clear to me how best to update this code, so this assert + will alert the first person to encounter the NetBSD/E500 + combination to the problem. */ + gdb_assert (ppc_floating_point_unit_p (current_gdbarch)); + for (i = 0; i < ppc_num_fprs; i++) { if (regno == tdep->ppc_fp0_regnum + i || regno == -1) @@ -128,6 +140,18 @@ ppcnbsd_fill_fpreg (char *fpregs, int regno) struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); int i; + /* FIXME: jimb/2004-05-05: Some PPC variants don't have floating + point registers. Traditionally, GDB's register set has still + listed the floating point registers for such machines, so this + code is harmless. However, the new E500 port actually omits the + floating point registers entirely from the register set --- they + don't even have register numbers assigned to them. + + It's not clear to me how best to update this code, so this assert + will alert the first person to encounter the NetBSD/E500 + combination to the problem. */ + gdb_assert (ppc_floating_point_unit_p (current_gdbarch)); + for (i = 0; i < ppc_num_fprs; i++) { if (regno == tdep->ppc_fp0_regnum + i || regno == -1) diff --git a/gdb/ppcobsd-tdep.c b/gdb/ppcobsd-tdep.c index 90381e4..49a8601 100644 --- a/gdb/ppcobsd-tdep.c +++ b/gdb/ppcobsd-tdep.c @@ -24,6 +24,7 @@ #include "osabi.h" #include "regcache.h" #include "regset.h" +#include "gdb_assert.h" #include "gdb_string.h" @@ -46,6 +47,18 @@ ppcobsd_supply_gregset (const struct regset *regset, struct regcache *regcache, int regnum, const void *gregs, size_t len) { + /* FIXME: jimb/2004-05-05: Some PPC variants don't have floating + point registers. Traditionally, GDB's register set has still + listed the floating point registers for such machines, so this + code is harmless. However, the new E500 port actually omits the + floating point registers entirely from the register set --- they + don't even have register numbers assigned to them. + + It's not clear to me how best to update this code, so this assert + will alert the first person to encounter the OpenBSD/E500 + combination to the problem. */ + gdb_assert (ppc_floating_point_unit_p (current_gdbarch)); + ppc_supply_gregset (regset, regcache, regnum, gregs, len); ppc_supply_fpregset (regset, regcache, regnum, gregs, len); } @@ -60,6 +73,18 @@ ppcobsd_collect_gregset (const struct regset *regset, const struct regcache *regcache, int regnum, void *gregs, size_t len) { + /* FIXME: jimb/2004-05-05: Some PPC variants don't have floating + point registers. Traditionally, GDB's register set has still + listed the floating point registers for such machines, so this + code is harmless. However, the new E500 port actually omits the + floating point registers entirely from the register set --- they + don't even have register numbers assigned to them. + + It's not clear to me how best to update this code, so this assert + will alert the first person to encounter the OpenBSD/E500 + combination to the problem. */ + gdb_assert (ppc_floating_point_unit_p (current_gdbarch)); + ppc_collect_gregset (regset, regcache, regnum, gregs, len); ppc_collect_fpregset (regset, regcache, regnum, gregs, len); } diff --git a/gdb/rs6000-nat.c b/gdb/rs6000-nat.c index b80b5a5..5fbf334 100644 --- a/gdb/rs6000-nat.c +++ b/gdb/rs6000-nat.c @@ -159,7 +159,8 @@ regmap (int regno, int *isfloat) if (tdep->ppc_gp0_regnum <= regno && regno < tdep->ppc_gp0_regnum + ppc_num_gprs) return regno; - else if (tdep->ppc_fp0_regnum <= regno + else if (tdep->ppc_fp0_regnum >= 0 + && tdep->ppc_fp0_regnum <= regno && regno < tdep->ppc_fp0_regnum + ppc_num_fprs) { *isfloat = 1; @@ -177,7 +178,8 @@ regmap (int regno, int *isfloat) return CTR; else if (regno == tdep->ppc_xer_regnum) return XER; - else if (regno == tdep->ppc_fpscr_regnum) + else if (tdep->ppc_fpscr_regnum >= 0 + && regno == tdep->ppc_fpscr_regnum) return FPSCR; else if (tdep->ppc_mq_regnum >= 0 && regno == tdep->ppc_mq_regnum) return MQ; @@ -359,8 +361,9 @@ fetch_inferior_registers (int regno) } /* Read general purpose floating point registers. */ - for (regno = 0; regno < ppc_num_fprs; regno++) - fetch_register (tdep->ppc_fp0_regnum + regno); + if (tdep->ppc_fp0_regnum >= 0) + for (regno = 0; regno < ppc_num_fprs; regno++) + fetch_register (tdep->ppc_fp0_regnum + regno); /* Read special registers. */ fetch_register (PC_REGNUM); @@ -369,7 +372,8 @@ fetch_inferior_registers (int regno) fetch_register (tdep->ppc_lr_regnum); fetch_register (tdep->ppc_ctr_regnum); fetch_register (tdep->ppc_xer_regnum); - fetch_register (tdep->ppc_fpscr_regnum); + if (tdep->ppc_fpscr_regnum >= 0) + fetch_register (tdep->ppc_fpscr_regnum); if (tdep->ppc_mq_regnum >= 0) fetch_register (tdep->ppc_mq_regnum); } @@ -398,8 +402,9 @@ store_inferior_registers (int regno) } /* Write floating point registers. */ - for (regno = 0; regno < ppc_num_fprs; regno++) - store_register (tdep->ppc_fp0_regnum + regno); + if (tdep->ppc_fp0_regnum >= 0) + for (regno = 0; regno < ppc_num_fprs; regno++) + store_register (tdep->ppc_fp0_regnum + regno); /* Write special registers. */ store_register (PC_REGNUM); @@ -408,7 +413,8 @@ store_inferior_registers (int regno) store_register (tdep->ppc_lr_regnum); store_register (tdep->ppc_ctr_regnum); store_register (tdep->ppc_xer_regnum); - store_register (tdep->ppc_fpscr_regnum); + if (tdep->ppc_fpscr_regnum >= 0) + store_register (tdep->ppc_fpscr_regnum); if (tdep->ppc_mq_regnum >= 0) store_register (tdep->ppc_mq_regnum); } @@ -583,9 +589,10 @@ fetch_core_registers (char *core_reg_sect, unsigned core_reg_size, for (regi = 0; regi < 32; regi++) supply_register (regi, (char *) ®s->r64.gpr[regi]); - for (regi = 0; regi < 32; regi++) - supply_register (tdep->ppc_fp0_regnum + regi, - (char *) ®s->r64.fpr[regi]); + if (tdep->ppc_fp0_regnum >= 0) + for (regi = 0; regi < 32; regi++) + supply_register (tdep->ppc_fp0_regnum + regi, + (char *) ®s->r64.fpr[regi]); supply_register (PC_REGNUM, (char *) ®s->r64.iar); supply_register (tdep->ppc_ps_regnum, (char *) ®s->r64.msr); @@ -593,16 +600,18 @@ fetch_core_registers (char *core_reg_sect, unsigned core_reg_size, supply_register (tdep->ppc_lr_regnum, (char *) ®s->r64.lr); supply_register (tdep->ppc_ctr_regnum, (char *) ®s->r64.ctr); supply_register (tdep->ppc_xer_regnum, (char *) ®s->r64.xer); - supply_register (tdep->ppc_fpscr_regnum, (char *) ®s->r64.fpscr); + if (tdep->ppc_fpscr_regnum >= 0) + supply_register (tdep->ppc_fpscr_regnum, (char *) ®s->r64.fpscr); } else { for (regi = 0; regi < 32; regi++) supply_register (regi, (char *) ®s->r32.gpr[regi]); - for (regi = 0; regi < 32; regi++) - supply_register (tdep->ppc_fp0_regnum + regi, - (char *) ®s->r32.fpr[regi]); + if (tdep->ppc_fp0_regnum >= 0) + for (regi = 0; regi < 32; regi++) + supply_register (tdep->ppc_fp0_regnum + regi, + (char *) ®s->r32.fpr[regi]); supply_register (PC_REGNUM, (char *) ®s->r32.iar); supply_register (tdep->ppc_ps_regnum, (char *) ®s->r32.msr); @@ -610,7 +619,8 @@ fetch_core_registers (char *core_reg_sect, unsigned core_reg_size, supply_register (tdep->ppc_lr_regnum, (char *) ®s->r32.lr); supply_register (tdep->ppc_ctr_regnum, (char *) ®s->r32.ctr); supply_register (tdep->ppc_xer_regnum, (char *) ®s->r32.xer); - supply_register (tdep->ppc_fpscr_regnum, (char *) ®s->r32.fpscr); + if (tdep->ppc_fpscr_regnum >= 0) + supply_register (tdep->ppc_fpscr_regnum, (char *) ®s->r32.fpscr); if (tdep->ppc_mq_regnum >= 0) supply_register (tdep->ppc_mq_regnum, (char *) ®s->r32.mq); } diff --git a/gdb/rs6000-tdep.c b/gdb/rs6000-tdep.c index 4ce8fa1..5879c2c 100644 --- a/gdb/rs6000-tdep.c +++ b/gdb/rs6000-tdep.c @@ -140,16 +140,16 @@ altivec_register_p (int regno) return (regno >= tdep->ppc_vr0_regnum && regno <= tdep->ppc_vrsave_regnum); } -/* Use the architectures FP registers? */ + +/* Return non-zero if the architecture described by GDBARCH has + floating-point registers (f0 --- f31 and fpscr). */ int ppc_floating_point_unit_p (struct gdbarch *gdbarch) { - const struct bfd_arch_info *info = gdbarch_bfd_arch_info (gdbarch); - if (info->arch == bfd_arch_powerpc) - return (info->mach != bfd_mach_ppc_e500); - if (info->arch == bfd_arch_rs6000) - return 1; - return 0; + struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); + + return (tdep->ppc_fp0_regnum >= 0 + && tdep->ppc_fpscr_regnum >= 0); } @@ -226,6 +226,8 @@ ppc_supply_fpregset (const struct regset *regset, struct regcache *regcache, size_t offset; int i; + gdb_assert (ppc_floating_point_unit_p (gdbarch)); + offset = offsets->f0_offset; for (i = tdep->ppc_fp0_regnum; i < tdep->ppc_fp0_regnum + ppc_num_fprs; @@ -301,6 +303,8 @@ ppc_collect_fpregset (const struct regset *regset, size_t offset; int i; + gdb_assert (ppc_floating_point_unit_p (gdbarch)); + offset = offsets->f0_offset; for (i = tdep->ppc_fp0_regnum; i <= tdep->ppc_fp0_regnum + ppc_num_fprs; @@ -1190,6 +1194,11 @@ rs6000_push_dummy_call (struct gdbarch *gdbarch, CORE_ADDR func_addr, CORE_ADDR saved_sp; + /* The calling convention this function implements assumes the + processor has floating-point registers. We shouldn't be using it + on PPC variants that lack them. */ + gdb_assert (ppc_floating_point_unit_p (current_gdbarch)); + /* The first eight words of ther arguments are passed in registers. Copy them appropriately. */ ii = 0; @@ -1416,6 +1425,11 @@ rs6000_extract_return_value (struct type *valtype, char *regbuf, char *valbuf) int offset = 0; struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); + /* The calling convention this function implements assumes the + processor has floating-point registers. We shouldn't be using it + on PPC variants that lack them. */ + gdb_assert (ppc_floating_point_unit_p (current_gdbarch)); + if (TYPE_CODE (valtype) == TYPE_CODE_FLT) { @@ -1727,6 +1741,9 @@ rs6000_dwarf2_stab_reg_to_regnum (int num) if (0 <= num && num <= 31) return tdep->ppc_gp0_regnum + num; else if (32 <= num && num <= 63) + /* FIXME: jimb/2004-05-05: What should we do when the debug info + specifies registers the architecture doesn't have? Our + callers don't check the value we return. */ return tdep->ppc_fp0_regnum + (num - 32); else if (1200 <= num && num < 1200 + 32) return tdep->ppc_ev0_regnum + (num - 1200); @@ -1765,6 +1782,11 @@ rs6000_store_return_value (struct type *type, char *valbuf) { struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); + /* The calling convention this function implements assumes the + processor has floating-point registers. We shouldn't be using it + on PPC variants that lack them. */ + gdb_assert (ppc_floating_point_unit_p (current_gdbarch)); + if (TYPE_CODE (type) == TYPE_CODE_FLT) /* Floating point values are returned starting from FPR1 and up. @@ -2445,11 +2467,17 @@ rs6000_frame_cache (struct frame_info *next_frame, void **this_cache) { int i; CORE_ADDR fpr_addr = cache->base + fdata.fpr_offset; - for (i = fdata.saved_fpr; i < 32; i++) - { - cache->saved_regs[tdep->ppc_fp0_regnum + i].addr = fpr_addr; - fpr_addr += 8; - } + + /* If skip_prologue says floating-point registers were saved, + but the current architecture has no floating-point registers, + then that's strange. But we have no indices to even record + the addresses under, so we just ignore it. */ + if (ppc_floating_point_unit_p (gdbarch)) + for (i = fdata.saved_fpr; i < 32; i++) + { + cache->saved_regs[tdep->ppc_fp0_regnum + i].addr = fpr_addr; + fpr_addr += 8; + } } /* if != -1, fdata.saved_gpr is the smallest number of saved_gpr. @@ -2763,6 +2791,8 @@ rs6000_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) tdep->ppc_xer_regnum = 5; tdep->ppc_ev0_regnum = 7; tdep->ppc_ev31_regnum = 38; + tdep->ppc_fp0_regnum = -1; + tdep->ppc_fpscr_regnum = -1; set_gdbarch_pc_regnum (gdbarch, 0); set_gdbarch_sp_regnum (gdbarch, tdep->ppc_gp0_regnum + 1); set_gdbarch_deprecated_fp_regnum (gdbarch, tdep->ppc_gp0_regnum + 1); -- cgit v1.1