From 5567978794e02ed8ef4a7793f8950857b22e324d Mon Sep 17 00:00:00 2001 From: Steve Chamberlain Date: Mon, 27 Jun 1994 17:16:26 +0000 Subject: * ser-e7kpc.c: New file to support the E7000 with the PC ISA bus interface. * serial.c (serial_open): Notice device "pc". * remote-e7000.c: Fix copyright date. (expect): Compare \n and \r the same. (e7000_open): Allow pc as a serial port * sh/sh.mt: Add ser-e7kpc. * h8300/h8300hms.mt: Add ser-e7kpc. * main.c (proc_wait): Don't wait if using go32. --- gdb/ser-e7kpc.c | 420 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 420 insertions(+) create mode 100644 gdb/ser-e7kpc.c (limited to 'gdb/ser-e7kpc.c') diff --git a/gdb/ser-e7kpc.c b/gdb/ser-e7kpc.c new file mode 100644 index 0000000..55d96a5 --- /dev/null +++ b/gdb/ser-e7kpc.c @@ -0,0 +1,420 @@ +/* Remote serial interface using Hitachi E7000 PC ISA card in a PC + + Copyright 1994 Free Software Foundation, Inc. + + This file is part of GDB. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#ifdef __GO32__ +#include "defs.h" +#include "serial.h" +#include + + + +static int e7000pc_open PARAMS ((serial_t scb, const char *name)); +static void e7000pc_raw PARAMS ((serial_t scb)); +static int e7000pc_readchar PARAMS ((serial_t scb, int timeout)); +static int e7000pc_setbaudrate PARAMS ((serial_t scb, int rate)); +static int e7000pc_write PARAMS ((serial_t scb, const char *str, int len)); +static void e7000pc_close PARAMS ((serial_t scb)); +static serial_ttystate e7000pc_get_tty_state PARAMS ((serial_t scb)); +static int e7000pc_set_tty_state PARAMS ((serial_t scb, serial_ttystate state)); +static char *aptr PARAMS ((short p)); + +static int dos_async_init PARAMS ((int port)); +static void dos_async_tx PARAMS ((const char c)); +static int dos_async_rx PARAMS (()); + + + +#define OFF_DPD 0x0000 +#define OFF_DDP 0x1000 +#define OFF_CPD 0x2000 +#define OFF_CDP 0x2400 +#define OFF_FA 0x3000 +#define OFF_FB 0x3002 +#define OFF_FC 0x3004 +#define OFF_IRQTOD 0x3008 +#define OFF_IRQTOP 0x300a +#define OFF_READY 0x300c +#define OFF_PON 0x300e + +#define IDLE 0x0000 +#define CMD_CI 0x4349 +#define CMD_CO 0x434f +#define CMD_LO 0x4c4f +#define CMD_LS 0x4c53 +#define CMD_SV 0x5356 +#define CMD_SS 0x5353 +#define CMD_OK 0x4f4b +#define CMD_ER 0x4552 +#define CMD_NF 0x4e46 +#define CMD_AB 0x4142 +#define CMD_ED 0x4544 +#define CMD_CE 0x4345 + +static unsigned long fa; +static unsigned long irqtod; +static unsigned long ready; +static unsigned long fb; +static unsigned long cpd ; +static unsigned long cdp ; +static unsigned long ready; +static unsigned long pon; +static unsigned long irqtop; +static unsigned long board_at; + +#define SET_BYTE(x,y) { char _buf = y;dosmemput(&_buf,1, x);} +#define SET_WORD(x,y) { short _buf = y;dosmemput(&_buf,2, x);} +#define GET_BYTE(x) ( dosmemget(x,1,&bb), bb) +#define GET_WORD(x) ( dosmemget(x,2,&sb), sb) + +static unsigned char bb; +static unsigned short sb; + + +static struct sw +{ + int sw; + int addr; +} sigs[] = { + {0x14, 0xd0000}, + {0x15, 0xd4000}, + {0x16, 0xd8000}, + {0x17, 0xdc000}, + 0}; + +static int +e7000pc_init () +{ + /* Look around in memory for the board's signature */ + + int try; + + for (try = 0; sigs[try].sw; try++) + + { + int val; + board_at = sigs[try].addr; + fa = board_at + OFF_FA; + fb = board_at + OFF_FB; + cpd = board_at + OFF_CPD; + cdp = board_at + OFF_CDP; + ready =board_at + OFF_READY; + pon = board_at + OFF_PON; + irqtop = board_at + OFF_IRQTOP; + irqtod = board_at + OFF_IRQTOD; + + val = GET_WORD (ready); + + if (val == (0xaaa0 | sigs[try].sw)) + { + if (GET_BYTE (pon) & 0xf) + { + SET_BYTE(fa, 0); + SET_BYTE (fb, 0); + + SET_BYTE (irqtop, 1); /* Disable interrupts from e7000 */ + SET_WORD (ready, 1); + printf_filtered ("\nConnected to the E7000PC at address 0x%x\n", + sigs[try].addr); + return 1; + } + error ("The E7000 PC board is working, but the E7000 is turned off.\n"); + return 0; + } + } + + error ("GDB cannot connect to the E7000 PC board, check that it is installed\n\ +and that the switch settings are correct. Some other DOS programs can \n\ +stop the board from working. Try starting from a very minimal boot, \n\ +perhaps you need to disable EMM386 over the region where the board has\n\ +its I/O space, remove other unneeded cards, etc etc\n"); + return 0; + +} + +static int pbuf_size; +static int pbuf_index; + +static +int +e7000_get () +{ + static char pbuf[1000]; + char tmp[1000]; + int x; + if (pbuf_index < pbuf_size) + { + x = pbuf[pbuf_index++]; + } + else if ((GET_BYTE (fb) & 1)) + { + int i; + pbuf_size = GET_WORD(cdp + 2); + + dosmemget (cdp + 8, pbuf_size + 1, tmp); + + /* Tell the E7000 we've eaten */ + SET_BYTE(fb,0); + /* Swap it around */ + for (i = 0; i < pbuf_size; i++) + { + pbuf[i] = tmp[i^1]; + } + pbuf_index = 0; + x = pbuf[pbuf_index++]; + } + else + { + x = -1; + } + return x; +} + +static int +dosasync_read (fd, buf, len, timeout) + int fd; + char *buf; + int len; + int timeout; + +{ + long now; + long then; + int i = 0; + int p; + + /* Then look for some more if we're still hungry */ + time (&now); + then = now + timeout; + while (i < len) + { + int ch = e7000_get(); + + /* While there's room in the buffer, and we've already + read the stuff in, suck it over */ + if (ch != -1) + { + buf[i++] = ch; + while (i < len && pbuf_index < pbuf_size ) + { + ch = e7000_get(); + if (ch == -1) + break; + buf[i++] = ch; + } + } + + time (&now); + + if (timeout == 0) + return i; + if (now >= then && timeout > 0) + { + return i; + } + } + return len; +} + + +static int +dosasync_write (fd, buf, len) + int fd; + const char *buf; + int len; +{ + int i; + char dummy[1000]; + + + /* Construct copy locally */ + ((short *)dummy)[0] = CMD_CI; + ((short *)dummy)[1] = len; + ((short *)dummy)[2] = 0; + ((short *)dummy)[3] = 0; + for (i = 0; i < len ; i++) + { + dummy[8 + i ^ 1] = buf[i]; + } + + /* Wait for the card to get ready */ + while ((GET_BYTE(fa) & 1) != 0) + ; + + /* Blast onto the ISA card */ + dosmemput (dummy, 8 + len + 1, cpd); + + SET_BYTE(fa, 1); + SET_BYTE(irqtod, 1); /* Interrupt the E7000 */ + + return len; +} + +static int +e7000pc_open (scb, name) + serial_t scb; + const char *name; +{ + if (strncasecmp (name, "pc", 2) != 0) + { + errno = ENOENT; + return -1; + } + + scb->fd = e7000pc_init (); + + if (!scb->fd) + return -1; + + return 0; +} + +static int +e7000pc_noop (scb) + serial_t scb; +{ + return 0; +} + +static void +e7000pc_raw (scb) + serial_t scb; +{ + /* Always in raw mode */ +} + +static int +e7000pc_readchar (scb, timeout) + serial_t scb; + int timeout; +{ + char buf; + + top: + + if (dosasync_read (scb->fd, &buf, 1, timeout)) + { + if (buf == 0) goto top; + return buf; + } + else + return SERIAL_TIMEOUT; +} + +struct e7000pc_ttystate { + int dummy; +}; + +/* e7000pc_{get set}_tty_state() are both dummys to fill out the function + vector. Someday, they may do something real... */ + +static serial_ttystate +e7000pc_get_tty_state (scb) + serial_t scb; +{ + struct e7000pc_ttystate *state; + + state = (struct e7000pc_ttystate *) xmalloc (sizeof *state); + + return (serial_ttystate) state; +} + +static int +e7000pc_set_tty_state (scb, ttystate) + serial_t scb; + serial_ttystate ttystate; +{ + return 0; +} + +static int +e7000pc_noflush_set_tty_state (scb, new_ttystate, old_ttystate) + serial_t scb; + serial_ttystate new_ttystate; + serial_ttystate old_ttystate; +{ + return 0; +} + +static void +e7000pc_print_tty_state (scb, ttystate) + serial_t scb; + serial_ttystate ttystate; +{ + /* Nothing to print. */ + return; +} + +static int +e7000pc_setbaudrate (scb, rate) + serial_t scb; + int rate; +{ + return 0; +} + +static int +e7000pc_write (scb, str, len) + serial_t scb; + const char *str; + int len; +{ + dosasync_write (scb->fd, str, len); + + return 0; +} + +static void +e7000pc_close (scb) + serial_t scb; +{ +} + +static struct serial_ops e7000pc_ops = +{ + "pc", + 0, + e7000pc_open, + e7000pc_close, + e7000pc_readchar, + e7000pc_write, + e7000pc_noop, /* flush output */ + e7000pc_noop, /* flush input */ + e7000pc_noop, /* send break -- currently used only for nindy */ + e7000pc_raw, + e7000pc_get_tty_state, + e7000pc_set_tty_state, + e7000pc_print_tty_state, + e7000pc_noflush_set_tty_state, + e7000pc_setbaudrate, +}; + +void +_initialize_ser_e7000pc () +{ + serial_add_interface (&e7000pc_ops); +} +#else + +void +_initialize_ser_e7000pc () +{ + +} +#endif -- cgit v1.1