From c906108c21474dfb4ed285bcc0ac6fe02cd400cc Mon Sep 17 00:00:00 2001 From: Stan Shebs Date: Fri, 16 Apr 1999 01:35:26 +0000 Subject: Initial creation of sourceware repository --- gdb/rdi-share/sys.h | 319 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 319 insertions(+) create mode 100644 gdb/rdi-share/sys.h (limited to 'gdb/rdi-share/sys.h') diff --git a/gdb/rdi-share/sys.h b/gdb/rdi-share/sys.h new file mode 100644 index 0000000..b68ac78 --- /dev/null +++ b/gdb/rdi-share/sys.h @@ -0,0 +1,319 @@ +/* + * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved. + * + * This software may be freely used, copied, modified, and distributed + * provided that the above copyright notice is preserved in all copies of the + * software. + */ + +/* sys.h + *********************************************************************** + * Angel C Libary support channel protocol definitions + * + * $Revision$ + * $Date$ + * + * + * + * + * MESSAGE FORMAT + * -------------- + * Format of the "data" section of C Lib Support Channel Messages. + * You will notice that the format is much the same as the format + * of ADP messages - this is so that multi-threaded C Libraries can + * be supported. + * + * unsigned32 reason - Main C Library reason code. + * unsigned32 debugID - Info. describing host debug world; + * private to host and used in any target + * initiated messages. + * unsigned32 OSinfo1 \ Target OS information to identify process/thread + * unsigned32 OSinfo2 / world, etc. These two fields are target defined. + * byte args[n] - Data for message "reason" code. + * + * The "debugID" is defined by the host-end of the protocol, and is used + * by the host to ensure that messages are routed to the correct handler + * program/veneer (eg. imagine several threads having opened stdout and + * each writing to a different window in a windowed debugger). + * + * NOTE: The reason that there is no "size" information, is that the + * message IDs themselves encode the format of any arguments. + * + * For further discussion of the format see adp.h + * + * N.B. All streams are little endian. + * + * CLIB REASON CODE + * ---------------- + * The message reason codes contain some information that ties them to + * the channel and direction that the message will be used with. This + * will ensure that even if the message "#define name" is not + * completely descriptive, the message reason code is. + * + * b31 = direction. 0=Host-to-Target; 1=Target-to-Host; + * b30-16 = reserved. should be zero + * b15-0 = message reason code. + * + * Note that typically a request will be initiated by the target side, and + * that the host will then respond with either an acknowledgement or some + * data. In either case the same reason code will be used, but the direction + * bit will be reveresed. + */ + +#ifndef __sys_h +#define __sys_h + +#ifndef HtoT +#define HtoT ((unsigned)0 << 31) /* Host-to-Target message */ +#define TtoH ((unsigned)1 << 31) /* Target-to-Host message */ +#endif + +/* + * The following are error codes used in the status field returned on + * sending a message. 0 represents no error having occurred, non-zero + * represents a general error. More codes should be added as required. + */ + +#ifndef ErrCode +#define NoError 0x0 +#endif + +/*************************************************************************/ +/* The following are direct conversions of the DeMon SWI's */ +/* NB: nbytes is the number of bytes INCLUDING THE NULL character where */ +/* applicable. */ + +/* This message is used as a response to a packet whose message + * was not understood. The return parameter, code is the reason + * code which was not understood. Although intended for use as a + * default case on a received message switch it can also be used + * as a proper message*/ +#define CL_Unrecognised 0x00 + /* Unrecognised() + * return(word code) + */ + +/* Write a character to the terminal. + */ +#define CL_WriteC 0x01 + /* WriteC(byte data) + * return(word status) + */ + +/* Write a NULL terminated string of characters to the terminal. The length + * of the string excluding the NULL terminating character is passed in + * 'nbytes'. + */ +#define CL_Write0 0x02 + /* Write0(word nbytes, bytes data) + * return(word status) + */ + +/* Read a character from the terminal - probably the keyboard. + */ +#define CL_ReadC 0x04 + /* ReadC(void) + * return(word status, byte data) + */ + +/* Perform system call, pass NULL terminated string to host's command + * line interpreter(NOT AVAILABLE IN PC/DOS RELEASE). The data byte + * returned holds the return code from the system call. + */ +#define CL_System 0x05 + /* CLI(word nbytes, bytes data) + * return(word status, word data) + */ + +/* It returns the address of the null terminated command line string used to + * invoke the program. status will be set to NoError if the command line + * can be returned. Other status values will be treated as error conditions. + */ +#define CL_GetCmdLine 0x10 + /* GetCmdLine(void) + * return(word status, word nbytes, bytes argline) + */ + +/* Return the number of centi-seconds since the support code began + * execution. Only the difference between successive calls can be + * meaningful. + */ +#define CL_Clock 0x61 + /* Clock(void) + * return(word status, word clks) + */ + +/* Return the number of seconds since the beginning of 1970. + */ +#define CL_Time 0x63 + /* Time(void) + * return(word status, word time) + */ + +/* Delete(remove, un-link, wipe, destroy) the file named by the + * NULL-terminated string 'name'. + */ +#define CL_Remove 0x64 + /* Remove(word nbytes, bytes name) + * return(word status) + */ + +/* Rename the file specified by the NULL-terminated string 'oname' + * to 'nname'. + */ +#define CL_Rename 0x65 + /* Rename(word nbytes, bytes oname, word nbytes, bytes nname) + * return(word status) + */ + +/* 'name' specifies a NULL-terminated string containing a file name or a + * device name. Opens the file/device and returns a non-zero handle on + * success that can be quoted to CL_Close, CL_Read, CL_Write, CL_Seek, + * CL_Flen or CL_IsTTY. The mode is an integer in the range 0-11:- + * + * Mode: 0 1 2 3 4 5 6 7 8 9 10 11 + * ANSI C fopen mode: r rb r+ r+b w wb w+ w+b a ab a+ a+b + * + * Values 12-15 are illegal. If 'name' is ":tt" the stdin/stdout is + * opened depending on whether 'mode' is read or write. + */ +#define CL_Open 0x66 + /* Open(word nbytes, bytes name, word mode) + * return(word handle) + */ + +/* 'handle' is a file handle previously returned by CL_Open. CL_Close + * closes the file. + */ +#define CL_Close 0x68 + /* Close(word handle) + * return(word status) + */ + +/* Writes data of length nbytes to the file/device specified by + * handle. nbtotal represents the total number of bytes to be + * written, whereas nbytes is the number of bytes in this packet + * + * If nbtotal is <= DATASIZE - CL_Write message header size in the + * packet then nbytes = nbtotal and the number of bytes not written + * is returned. If nbtotal is > the packet size then the CL_Write + * must be followed by a number of CL_WriteX's to complete the write, + * the nbytes returned by CL_Write can be ignored + * If the status word returned is non zero, an error has occurred and + * the write request has been aborted. + * + */ +#define CL_Write 0x69 + /* Write(word handle, word nbtotal, word nbytes, bytes data) + * return(word status, word nbytes) + */ + +/* Write Extension is a reads a continuation of data from a CL_Write + * which was too big to fit in a single packet. + * nbytes is the number of bytes of data in this packet, the + * returned value of nbytes can be ignored except if it is the + * last packet, in which case it is the number of bytes that were NOT + * written + */ +#define CL_WriteX 0x6A + /* WriteX(word nbytes, bytes data) + * return(word status, word nbytes) + */ + +/* Reads 'nbytes' from the file/device specified by 'handle'. + * + * If nbytes <= DATASIZE then the read will occur in a single packet + * and the returned value of nbytes will be the number of bytes actually + * read and nbmore will be 0. If nbytes> DATASIZE then multiple packets + * will have to be used ie CL_Read followed by 1 or more CL_ReadX + * packets. In this case CL_Read will return nbytes read in the current + * packet and nbmore representing how many more bytes are expected to be + * read + * If the status word is non zero then the request has completed with an + * error. If the status word is 0xFFFFFFFF (-1) then an EOF condition + * has been reached. + */ +#define CL_Read 0x6B + /* Read(word handle, word nbytes) + * return(word status, word nbytes, word nbmore, bytes data) + */ + +/* Read eXtension returns a continuation of the data that was opened for + * read in the earlier CL_Read. The return value nbytes is the number of + * data bytes in the packet, nbmore is the number of bytes more that are + * expected to be read in subsequent packets. + */ +#define CL_ReadX 0x6C + /* ReadX() + * return(word status, word nbytes, word nbmore, bytes data) + */ + +/* Seeks to byte position 'posn' in the file/device specified by 'handle'. + */ +#define CL_Seek 0x6D + /* Seek(word handle, word posn) + * return(word status) + */ + +/* Returns the current length of the file specified by 'handle' in 'len'. + * If an error occurs 'len' is set to -1. + */ +#define CL_Flen 0x6E + /* Flen(word handle) + * return(word len) + */ + +/* Returns NoError if 'handle' specifies an interactive device, otherwise + * returns GenError + */ +#define CL_IsTTY 0x6F + /* IsTTY(word handle) + * return(word status) + */ + +/* Returns a temporary host file name. The maximum length of a file name + * is passed to the host. The TargetID is some identifier from the target + * for this particular temporary filename. This value is could be used + * directly in the generation of the filename. + * + * If the host cannot create a suitable name or the generated name is too + * long then status is non zero. status will be NoError if the host can create + * a name. + */ +#define CL_TmpNam 0x70 + /* TmpNam(word maxlength, word TargetID) + * return(word status, word nbytes, bytes fname) + */ + +/* Note there is no message for Exit, EnterOS, InstallHandler or + * GenerateError as these will be supported entirely at the host end, + * or by the underlying Operating system. + */ + +#define CL_UnknownReason (-1) + +extern unsigned int GetRaiseHandler( void ); +extern unsigned int SysLibraryHandler(unsigned int sysCode, unsigned int *args); +extern void angel_SysLibraryInit(void); + +/* + * Function: Angel_IsSysHandlerRunning + * Purpose: return whether or not SysLibraryHandler is running + * + * No paramaters + * + * Returns 1 if SysLibraryHandler is running + * 0 otherwise + */ +extern int Angel_IsSysHandlerRunning(void); + +#ifdef ICEMAN2 +/* This function exists in an ICEman2 system only, and can be called by + * debug support code when the debugger tells it how much memory the + * target has. This will then be used to deal with the HEAPINFO SWI + */ +extern void angel_SetTopMem(unsigned addr); +#endif + +#endif + -- cgit v1.1